1292 files changed, 64990 insertions, 18561 deletions

diff --git a/Documentation/boards/sandbox.rst b/Documentation/boards/sandbox.rst
index 85a54e6b04..8b00093fb9 100644
--- a/Documentation/boards/sandbox.rst
+++ b/Documentation/boards/sandbox.rst
@@ -57,3 +57,6 @@ Available sandbox invocation options include:
   ``-y``, ``--yres <res>``
 
     Specify SDL height.
+
+To terminate barebox and return to the calling shell, the poweroff command is
+suitable.
diff --git a/Documentation/boards/stm32mp.rst b/Documentation/boards/stm32mp.rst
index 6d97b0d6d4..de793ab3c9 100644
--- a/Documentation/boards/stm32mp.rst
+++ b/Documentation/boards/stm32mp.rst
@@ -35,7 +35,7 @@ The resulting images will be placed under ``images/``:
 Flashing barebox
 ----------------
 
-An appropriate image for the boot media can be generated with following
+An appropriate image for a SD-Card can be generated with following
 ``genimage(1)`` config::
 
   image @STM32MP_BOARD@.img {
@@ -61,7 +61,22 @@ An appropriate image for the boot media can be generated with following
       }
   }
 
-Image can then be flashed on e.g. a SD-Card.
+For eMMC, the boot partitions are used as the FSBL partitions and so the user
+partitions may look like this:
+
+  image @STM32MP_BOARD@.img {
+      partition ssbl {
+          image = "barebox-@STM32MP_BOARD@.img"
+          size = 1M
+      }
+      partition barebox-environment {
+          image = "/dev/null"
+          size = 1M
+      }
+  }
+
+The fsbl1 and fsbl2 can be flashed by writing to barebox ``/dev/mmcX.boot0`` and
+``/dev/mmcX.boot1`` respectively or from a booted operating system.
 
 Boot source selection
 ---------------------
diff --git a/Documentation/user/booting-linux.rst b/Documentation/user/booting-linux.rst
index 12cd505e71..983b56deef 100644
--- a/Documentation/user/booting-linux.rst
+++ b/Documentation/user/booting-linux.rst
@@ -158,7 +158,7 @@ Bootloader Spec
 
 barebox supports booting according to the bootloader spec:
 
-http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/
+https://systemd.io/BOOT_LOADER_SPECIFICATION/
 
 It follows another philosophy than the :ref:`boot_entries`. With Boot Entries
 booting is completely configured in the bootloader. Bootloader Spec Entries
@@ -232,10 +232,6 @@ device where the entry is found on. This makes it possible to use the same rootf
 image on different devices without having to specify a different root= option each
 time.
 
-Additionally to the options defined in the original spec, Barebox has the
-``devicetree-overlay`` option. This is a string value that refer to overlays
-that will be applied to the device tree before passing it to Linux.
-
 Network boot
 ------------
 
diff --git a/Documentation/user/optee.rst b/Documentation/user/optee.rst
new file mode 100644
index 0000000000..950917b446
--- /dev/null
+++ b/Documentation/user/optee.rst
@@ -0,0 +1,29 @@
+
+.. _optee:
+
+OP-TEE
+======
+
+Barebox is able to start the Open Portable Trusted Execution Environment
+(OP-TEE) either before starting the linux kernel or during lowlevel board
+initialization in the Pre Bootloader ``PBL``.
+
+Before Linux start
+------------------
+Enable the `CONFIG_BOOTM_OPTEE` configuration variable and configure the
+`CONFIG_OPTEE_SIZE` variable. This will reserve a memory area at the end
+of memory for OP-TEE to run, usually Barebox would relocate itself there. To
+load OP-TEE before the kernel is started, configure the global ``bootm.tee``
+variable to point to a valid OPTEE v1 binary.
+
+During the PBL
+--------------
+To start OP-TEE during the lowlevel initialization of your board in the ``PBL``,
+enable the ``CONFIG_PBL_OPTEE`` configuration variable. your board should then
+call the function ``start_optee_early(void* tee, void* fdt)`` with a valid tee
+and FDT. Ensure that your OP-TEE is compiled with ``CFG_NS_ENTRY_ADDR`` unset,
+otherwise OP-TEE will not correctly return to barebox after startup.
+Since OP-TEE in the default configuration also modifies the device tree, don't
+pass the barebox internal device tree, instead copy it into a different memory
+location and pass it to OP-TEE afterwards.
+The modified device tree can then be passed to the main barebox start function.
diff --git a/Documentation/user/user-manual.rst b/Documentation/user/user-manual.rst
index 41fdb8805c..827683eaa0 100644
--- a/Documentation/user/user-manual.rst
+++ b/Documentation/user/user-manual.rst
@@ -33,6 +33,7 @@ Contents:
    system-reset
    state
    random
+   optee
    debugging
    watchdog
 
diff --git a/LICENSES/preferred/LGPL-2.1-or-later b/LICENSES/preferred/LGPL-2.1-or-later
new file mode 100644
index 0000000000..04bb156e77
--- /dev/null
+++ b/LICENSES/preferred/LGPL-2.1-or-later
@@ -0,0 +1,468 @@
+GNU LESSER GENERAL PUBLIC LICENSE
+
+Version 2.1, February 1999
+
+Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+Everyone is permitted to copy and distribute verbatim copies of this license
+document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL. It also counts as the
+successor of the GNU Library Public License, version 2, hence the version
+number 2.1.]
+
+Preamble
+
+The licenses for most software are designed to take away your freedom to share
+and change it. By contrast, the GNU General Public Licenses are intended to
+guarantee your freedom to share and change free software--to make sure the
+software is free for all its users.
+
+This license, the Lesser General Public License, applies to some specially
+designated software packages--typically libraries--of the Free Software Foundation
+and other authors who decide to use it. You can use it too, but we suggest
+you first think carefully about whether this license or the ordinary General
+Public License is the better strategy to use in any particular case, based
+on the explanations below.
+
+When we speak of free software, we are referring to freedom of use, not price.
+Our General Public Licenses are designed to make sure that you have the freedom
+to distribute copies of free software (and charge for this service if you
+wish); that you receive source code or can get it if you want it; that you
+can change the software and use pieces of it in new free programs; and that
+you are informed that you can do these things.
+
+To protect your rights, we need to make restrictions that forbid distributors
+to deny you these rights or to ask you to surrender these rights. These restrictions
+translate to certain responsibilities for you if you distribute copies of
+the library or if you modify it.
+
+For example, if you distribute copies of the library, whether gratis or for
+a fee, you must give the recipients all the rights that we gave you. You must
+make sure that they, too, receive or can get the source code. If you link
+other code with the library, you must provide complete object files to the
+recipients, so that they can relink them with the library after making changes
+to the library and recompiling it. And you must show them these terms so they
+know their rights.
+
+We protect your rights with a two-step method: (1) we copyright the library,
+and (2) we offer you this license, which gives you legal permission to copy,
+distribute and/or modify the library.
+
+To protect each distributor, we want to make it very clear that there is no
+warranty for the free library. Also, if the library is modified by someone
+else and passed on, the recipients should know that what they have is not
+the original version, so that the original author's reputation will not be
+affected by problems that might be introduced by others.
+
+Finally, software patents pose a constant threat to the existence of any free
+program. We wish to make sure that a company cannot effectively restrict the
+users of a free program by obtaining a restrictive license from a patent holder.
+Therefore, we insist that any patent license obtained for a version of the
+library must be consistent with the full freedom of use specified in this
+license.
+
+Most GNU software, including some libraries, is covered by the ordinary GNU
+General Public License. This license, the GNU Lesser General Public License,
+applies to certain designated libraries, and is quite different from the ordinary
+General Public License. We use this license for certain libraries in order
+to permit linking those libraries into non-free programs.
+
+When a program is linked with a library, whether statically or using a shared
+library, the combination of the two is legally speaking a combined work, a
+derivative of the original library. The ordinary General Public License therefore
+permits such linking only if the entire combination fits its criteria of freedom.
+The Lesser General Public License permits more lax criteria for linking other
+code with the library.
+
+We call this license the "Lesser" General Public License because it does Less
+to protect the user's freedom than the ordinary General Public License. It
+also provides other free software developers Less of an advantage over competing
+non-free programs. These disadvantages are the reason we use the ordinary
+General Public License for many libraries. However, the Lesser license provides
+advantages in certain special circumstances.
+
+For example, on rare occasions, there may be a special need to encourage the
+widest possible use of a certain library, so that it becomes a de-facto standard.
+To achieve this, non-free programs must be allowed to use the library. A more
+frequent case is that a free library does the same job as widely used non-free
+libraries. In this case, there is little to gain by limiting the free library
+to free software only, so we use the Lesser General Public License.
+
+In other cases, permission to use a particular library in non-free programs
+enables a greater number of people to use a large body of free software. For
+example, permission to use the GNU C Library in non-free programs enables
+many more people to use the whole GNU operating system, as well as its variant,
+the GNU/Linux operating system.
+
+Although the Lesser General Public License is Less protective of the users'
+freedom, it does ensure that the user of a program that is linked with the
+Library has the freedom and the wherewithal to run that program using a modified
+version of the Library.
+
+The precise terms and conditions for copying, distribution and modification
+follow. Pay close attention to the difference between a "work based on the
+library" and a "work that uses the library". The former contains code derived
+from the library, whereas the latter must be combined with the library in
+order to run.
+
+TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+0. This License Agreement applies to any software library or other program
+which contains a notice placed by the copyright holder or other authorized
+party saying it may be distributed under the terms of this Lesser General
+Public License (also called "this License"). Each licensee is addressed as
+"you".
+
+A "library" means a collection of software functions and/or data prepared
+so as to be conveniently linked with application programs (which use some
+of those functions and data) to form executables.
+
+The "Library", below, refers to any such software library or work which has
+been distributed under these terms. A "work based on the Library" means either
+the Library or any derivative work under copyright law: that is to say, a
+work containing the Library or a portion of it, either verbatim or with modifications
+and/or translated straightforwardly into another language. (Hereinafter, translation
+is included without limitation in the term "modification".)
+
+"Source code" for a work means the preferred form of the work for making modifications
+to it. For a library, complete source code means all the source code for all
+modules it contains, plus any associated interface definition files, plus
+the scripts used to control compilation and installation of the library.
+
+Activities other than copying, distribution and modification are not covered
+by this License; they are outside its scope. The act of running a program
+using the Library is not restricted, and output from such a program is covered
+only if its contents constitute a work based on the Library (independent of
+the use of the Library in a tool for writing it). Whether that is true depends
+on what the Library does and what the program that uses the Library does.
+
+1. You may copy and distribute verbatim copies of the Library's complete source
+code as you receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice and disclaimer
+of warranty; keep intact all the notices that refer to this License and to
+the absence of any warranty; and distribute a copy of this License along with
+the Library.
+
+You may charge a fee for the physical act of transferring a copy, and you
+may at your option offer warranty protection in exchange for a fee.
+
+2. You may modify your copy or copies of the Library or any portion of it,
+thus forming a work based on the Library, and copy and distribute such modifications
+or work under the terms of Section 1 above, provided that you also meet all
+of these conditions:
+
+      a) The modified work must itself be a software library.
+
+b) You must cause the files modified to carry prominent notices stating that
+you changed the files and the date of any change.
+
+c) You must cause the whole of the work to be licensed at no charge to all
+third parties under the terms of this License.
+
+d) If a facility in the modified Library refers to a function or a table of
+data to be supplied by an application program that uses the facility, other
+than as an argument passed when the facility is invoked, then you must make
+a good faith effort to ensure that, in the event an application does not supply
+such function or table, the facility still operates, and performs whatever
+part of its purpose remains meaningful.
+
+(For example, a function in a library to compute square roots has a purpose
+that is entirely well-defined independent of the application. Therefore, Subsection
+2d requires that any application-supplied function or table used by this function
+must be optional: if the application does not supply it, the square root function
+must still compute square roots.)
+
+These requirements apply to the modified work as a whole. If identifiable
+sections of that work are not derived from the Library, and can be reasonably
+considered independent and separate works in themselves, then this License,
+and its terms, do not apply to those sections when you distribute them as
+separate works. But when you distribute the same sections as part of a whole
+which is a work based on the Library, the distribution of the whole must be
+on the terms of this License, whose permissions for other licensees extend
+to the entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest your
+rights to work written entirely by you; rather, the intent is to exercise
+the right to control the distribution of derivative or collective works based
+on the Library.
+
+In addition, mere aggregation of another work not based on the Library with
+the Library (or with a work based on the Library) on a volume of a storage
+or distribution medium does not bring the other work under the scope of this
+License.
+
+3. You may opt to apply the terms of the ordinary GNU General Public License
+instead of this License to a given copy of the Library. To do this, you must
+alter all the notices that refer to this License, so that they refer to the
+ordinary GNU General Public License, version 2, instead of to this License.
+(If a newer version than version 2 of the ordinary GNU General Public License
+has appeared, then you can specify that version instead if you wish.) Do not
+make any other change in these notices.
+
+Once this change is made in a given copy, it is irreversible for that copy,
+so the ordinary GNU General Public License applies to all subsequent copies
+and derivative works made from that copy.
+
+This option is useful when you wish to copy part of the code of the Library
+into a program that is not a library.
+
+4. You may copy and distribute the Library (or a portion or derivative of
+it, under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you accompany it with the complete corresponding
+machine-readable source code, which must be distributed under the terms of
+Sections 1 and 2 above on a medium customarily used for software interchange.
+
+If distribution of object code is made by offering access to copy from a designated
+place, then offering equivalent access to copy the source code from the same
+place satisfies the requirement to distribute the source code, even though
+third parties are not compelled to copy the source along with the object code.
+
+5. A program that contains no derivative of any portion of the Library, but
+is designed to work with the Library by being compiled or linked with it,
+is called a "work that uses the Library". Such a work, in isolation, is not
+a derivative work of the Library, and therefore falls outside the scope of
+this License.
+
+However, linking a "work that uses the Library" with the Library creates an
+executable that is a derivative of the Library (because it contains portions
+of the Library), rather than a "work that uses the library". The executable
+is therefore covered by this License. Section 6 states terms for distribution
+of such executables.
+
+When a "work that uses the Library" uses material from a header file that
+is part of the Library, the object code for the work may be a derivative work
+of the Library even though the source code is not. Whether this is true is
+especially significant if the work can be linked without the Library, or if
+the work is itself a library. The threshold for this to be true is not precisely
+defined by law.
+
+If such an object file uses only numerical parameters, data structure layouts
+and accessors, and small macros and small inline functions (ten lines or less
+in length), then the use of the object file is unrestricted, regardless of
+whether it is legally a derivative work. (Executables containing this object
+code plus portions of the Library will still fall under Section 6.)
+
+Otherwise, if the work is a derivative of the Library, you may distribute
+the object code for the work under the terms of Section 6. Any executables
+containing that work also fall under Section 6, whether or not they are linked
+directly with the Library itself.
+
+6. As an exception to the Sections above, you may also combine or link a "work
+that uses the Library" with the Library to produce a work containing portions
+of the Library, and distribute that work under terms of your choice, provided
+that the terms permit modification of the work for the customer's own use
+and reverse engineering for debugging such modifications.
+
+You must give prominent notice with each copy of the work that the Library
+is used in it and that the Library and its use are covered by this License.
+You must supply a copy of this License. If the work during execution displays
+copyright notices, you must include the copyright notice for the Library among
+them, as well as a reference directing the user to the copy of this License.
+Also, you must do one of these things:
+
+a) Accompany the work with the complete corresponding machine-readable source
+code for the Library including whatever changes were used in the work (which
+must be distributed under Sections 1 and 2 above); and, if the work is an
+executable linked with the Library, with the complete machine-readable "work
+that uses the Library", as object code and/or source code, so that the user
+can modify the Library and then relink to produce a modified executable containing
+the modified Library. (It is understood that the user who changes the contents
+of definitions files in the Library will not necessarily be able to recompile
+the application to use the modified definitions.)
+
+b) Use a suitable shared library mechanism for linking with the Library. A
+suitable mechanism is one that (1) uses at run time a copy of the library
+already present on the user's computer system, rather than copying library
+functions into the executable, and (2) will operate properly with a modified
+version of the library, if the user installs one, as long as the modified
+version is interface-compatible with the version that the work was made with.
+
+c) Accompany the work with a written offer, valid for at least three years,
+to give the same user the materials specified in Subsection 6a, above, for
+a charge no more than the cost of performing this distribution.
+
+d) If distribution of the work is made by offering access to copy from a designated
+place, offer equivalent access to copy the above specified materials from
+the same place.
+
+e) Verify that the user has already received a copy of these materials or
+that you have already sent this user a copy.
+
+For an executable, the required form of the "work that uses the Library" must
+include any data and utility programs needed for reproducing the executable
+from it. However, as a special exception, the materials to be distributed
+need not include anything that is normally distributed (in either source or
+binary form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component itself
+accompanies the executable.
+
+It may happen that this requirement contradicts the license restrictions of
+other proprietary libraries that do not normally accompany the operating system.
+Such a contradiction means you cannot use both them and the Library together
+in an executable that you distribute.
+
+7. You may place library facilities that are a work based on the Library side-by-side
+in a single library together with other library facilities not covered by
+this License, and distribute such a combined library, provided that the separate
+distribution of the work based on the Library and of the other library facilities
+is otherwise permitted, and provided that you do these two things:
+
+a) Accompany the combined library with a copy of the same work based on the
+Library, uncombined with any other library facilities. This must be distributed
+under the terms of the Sections above.
+
+b) Give prominent notice with the combined library of the fact that part of
+it is a work based on the Library, and explaining where to find the accompanying
+uncombined form of the same work.
+
+8. You may not copy, modify, sublicense, link with, or distribute the Library
+except as expressly provided under this License. Any attempt otherwise to
+copy, modify, sublicense, link with, or distribute the Library is void, and
+will automatically terminate your rights under this License. However, parties
+who have received copies, or rights, from you under this License will not
+have their licenses terminated so long as such parties remain in full compliance.
+
+9. You are not required to accept this License, since you have not signed
+it. However, nothing else grants you permission to modify or distribute the
+Library or its derivative works. These actions are prohibited by law if you
+do not accept this License. Therefore, by modifying or distributing the Library
+(or any work based on the Library), you indicate your acceptance of this License
+to do so, and all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+10. Each time you redistribute the Library (or any work based on the Library),
+the recipient automatically receives a license from the original licensor
+to copy, distribute, link with or modify the Library subject to these terms
+and conditions. You may not impose any further restrictions on the recipients'
+exercise of the rights granted herein. You are not responsible for enforcing
+compliance by third parties with this License.
+
+11. If, as a consequence of a court judgment or allegation of patent infringement
+or for any other reason (not limited to patent issues), conditions are imposed
+on you (whether by court order, agreement or otherwise) that contradict the
+conditions of this License, they do not excuse you from the conditions of
+this License. If you cannot distribute so as to satisfy simultaneously your
+obligations under this License and any other pertinent obligations, then as
+a consequence you may not distribute the Library at all. For example, if a
+patent license would not permit royalty-free redistribution of the Library
+by all those who receive copies directly or indirectly through you, then the
+only way you could satisfy both it and this License would be to refrain entirely
+from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any patents
+or other property right claims or to contest validity of any such claims;
+this section has the sole purpose of protecting the integrity of the free
+software distribution system which is implemented by public license practices.
+Many people have made generous contributions to the wide range of software
+distributed through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing to
+distribute software through any other system and a licensee cannot impose
+that choice.
+
+This section is intended to make thoroughly clear what is believed to be a
+consequence of the rest of this License.
+
+12. If the distribution and/or use of the Library is restricted in certain
+countries either by patents or by copyrighted interfaces, the original copyright
+holder who places the Library under this License may add an explicit geographical
+distribution limitation excluding those countries, so that distribution is
+permitted only in or among countries not thus excluded. In such case, this
+License incorporates the limitation as if written in the body of this License.
+
+13. The Free Software Foundation may publish revised and/or new versions of
+the Lesser General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to address
+new problems or concerns.
+
+Each version is given a distinguishing version number. If the Library specifies
+a version number of this License which applies to it and "any later version",
+you have the option of following the terms and conditions either of that version
+or of any later version published by the Free Software Foundation. If the
+Library does not specify a license version number, you may choose any version
+ever published by the Free Software Foundation.
+
+14. If you wish to incorporate parts of the Library into other free programs
+whose distribution conditions are incompatible with these, write to the author
+to ask for permission. For software which is copyrighted by the Free Software
+Foundation, write to the Free Software Foundation; we sometimes make exceptions
+for this. Our decision will be guided by the two goals of preserving the free
+status of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+   NO WARRANTY
+
+15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR
+THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
+STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY
+"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
+OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
+THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
+OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
+OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES
+OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH
+HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+END OF TERMS AND CONDITIONS
+
+How to Apply These Terms to Your New Libraries
+
+If you develop a new library, and you want it to be of the greatest possible
+use to the public, we recommend making it free software that everyone can
+redistribute and change. You can do so by permitting redistribution under
+these terms (or, alternatively, under the terms of the ordinary General Public
+License).
+
+To apply these terms, attach the following notices to the library. It is safest
+to attach them to the start of each source file to most effectively convey
+the exclusion of warranty; and each file should have at least the "copyright"
+line and a pointer to where the full notice is found.
+
+<one line to give the library's name and an idea of what it does.>
+
+Copyright (C) <year> <name of author>
+
+This library is free software; you can redistribute it and/or modify it under
+the terms of the GNU Lesser General Public License as published by the Free
+Software Foundation; either version 2.1 of the License, or (at your option)
+any later version.
+
+This library is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
+details.
+
+You should have received a copy of the GNU Lesser General Public License along
+with this library; if not, write to the Free Software Foundation, Inc., 51
+Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your school,
+if any, to sign a "copyright disclaimer" for the library, if necessary. Here
+is a sample; alter the names:
+
+Yoyodyne, Inc., hereby disclaims all copyright interest in
+
+the library `Frob' (a library for tweaking knobs) written
+
+by James Random Hacker.
+
+< signature of Ty Coon > , 1 April 1990
+
+Ty Coon, President of Vice
+
+That's all there is to it!
diff --git a/Makefile b/Makefile
index e088497189..fe7da86b76 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
 VERSION = 2020
-PATCHLEVEL = 01
+PATCHLEVEL = 03
 SUBLEVEL = 0
 EXTRAVERSION =
 NAME = None
@@ -313,6 +313,7 @@ LDFLAGS_barebox	:= -Map barebox.map
 
 # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
 LDFLAGS_barebox += $(call ld-option, --no-dynamic-linker)
+LDFLAGS_pbl += $(call ld-option, --no-dynamic-linker)
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
@@ -328,6 +329,7 @@ export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 export CFLAGS CFLAGS_KERNEL
 export AFLAGS AFLAGS_KERNEL
 export LDFLAGS_barebox
+export LDFLAGS_pbl
 
 export CFLAGS_UBSAN
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 740b0790e7..29fd8e276c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -140,6 +140,7 @@ CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
 # Add cleanup flags
 CPPFLAGS += -fdata-sections -ffunction-sections
 LDFLAGS_barebox += --gc-sections
+LDFLAGS_pbl += --gc-sections
 
 # early code often runs at addresses we are not linked at
 CPPFLAGS += -fPIE
@@ -150,6 +151,12 @@ else
 LDFLAGS_barebox += -static
 endif
 
+ifdef CONFIG_PBL_RELOCATABLE
+LDFLAGS_pbl += -pie
+else
+LDFLAGS_pbl += -static
+endif
+
 KBUILD_BINARY := barebox.bin
 
 barebox.s5p: $(KBUILD_BINARY)
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 6cb40d084b..edc600b41e 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -112,6 +112,7 @@ obj-$(CONFIG_MACH_RPI_COMMON)			+= raspberry-pi/
 obj-$(CONFIG_MACH_SABRELITE)			+= freescale-mx6-sabrelite/
 obj-$(CONFIG_MACH_SABRESD)			+= freescale-mx6-sabresd/
 obj-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB)	+= freescale-mx6sx-sabresdb/
+obj-$(CONFIG_MACH_SAMA5D27_GIANTBOARD)		+= sama5d27-giantboard/
 obj-$(CONFIG_MACH_SAMA5D27_SOM1)		+= sama5d27-som1/
 obj-$(CONFIG_MACH_SAMA5D3XEK)			+= sama5d3xek/
 obj-$(CONFIG_MACH_SAMA5D3_XPLAINED)		+= sama5d3_xplained/
diff --git a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
index c16316d4a1..95159bbbb1 100644
--- a/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
+++ b/arch/arm/boards/eukrea_cpuimx25/lowlevel.c
@@ -130,7 +130,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 	writel(0x82216080, MX25_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
 
 	if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
-		imx25_barebox_boot_nand_external(0);
+		imx25_barebox_boot_nand_external();
 
 out:
 	imx25_barebox_entry(NULL);
diff --git a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
index ab5235f7f0..4bb41b0f42 100644
--- a/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
+++ b/arch/arm/boards/eukrea_cpuimx35/lowlevel.c
@@ -135,7 +135,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 		r |= 0x1 << 28;
 		writel(r, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
 
-		imx35_barebox_boot_nand_external(0);
+		imx35_barebox_boot_nand_external();
 	}
 
 out:
diff --git a/arch/arm/boards/guf-cupid/lowlevel.c b/arch/arm/boards/guf-cupid/lowlevel.c
index 0d7cfb618c..60dd567298 100644
--- a/arch/arm/boards/guf-cupid/lowlevel.c
+++ b/arch/arm/boards/guf-cupid/lowlevel.c
@@ -308,7 +308,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 		r0 |= 0x1 << 28;
 		writel(r0, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
 
-		imx35_barebox_boot_nand_external(0);
+		imx35_barebox_boot_nand_external();
 	}
 
 out:
diff --git a/arch/arm/boards/guf-neso/lowlevel.c b/arch/arm/boards/guf-neso/lowlevel.c
index 20f48be7dd..3ae70eca30 100644
--- a/arch/arm/boards/guf-neso/lowlevel.c
+++ b/arch/arm/boards/guf-neso/lowlevel.c
@@ -89,7 +89,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 			MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
 
 	if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
-		imx27_barebox_boot_nand_external(0);
+		imx27_barebox_boot_nand_external();
 
 out:
 	imx27_barebox_entry(NULL);
diff --git a/arch/arm/boards/karo-tx25/lowlevel.c b/arch/arm/boards/karo-tx25/lowlevel.c
index f79cd91640..6c34944f74 100644
--- a/arch/arm/boards/karo-tx25/lowlevel.c
+++ b/arch/arm/boards/karo-tx25/lowlevel.c
@@ -74,7 +74,24 @@ static inline void __bare_init  setup_sdram(uint32_t base, uint32_t esdctl,
 	writel(esdctl, esdctlreg);
 }
 
-static void __bare_init karo_tx25_common_init(void *fdt)
+extern char __dtb_imx25_karo_tx25_start[];
+
+static void __noreturn karo_tx25_start(void)
+{
+	void *fdt;
+
+	fdt = __dtb_imx25_karo_tx25_start + get_runtime_offset();
+
+	imx25_barebox_entry(fdt);
+}
+
+static void __noreturn karo_tx25_load_nand(void)
+{
+	imx25_nand_load_image();
+	karo_tx25_start();
+}
+
+static void __bare_init karo_tx25_common_init(void)
 {
 	uint32_t r;
 
@@ -138,7 +155,7 @@ static void __bare_init karo_tx25_common_init(void *fdt)
 	/* Skip SDRAM initialization if we run from RAM */
 	r = get_pc();
 	if (r > 0x80000000 && r < 0xa0000000)
-		goto out;
+		karo_tx25_start();
 
 	/* set to 3.3v SDRAM */
 	writel(0x800, MX25_IOMUXC_BASE_ADDR + 0x454);
@@ -156,21 +173,12 @@ static void __bare_init karo_tx25_common_init(void *fdt)
 	setup_sdram(0x80000000, ESDCTLVAL, ESDCFGVAL);
 	setup_sdram(0x90000000, ESDCTLVAL, ESDCFGVAL);
 
-	imx25_barebox_boot_nand_external(fdt);
-
-out:
-	imx25_barebox_entry(fdt);
+	imx25_nand_relocate_to_sdram(karo_tx25_load_nand);
 }
 
-extern char __dtb_imx25_karo_tx25_start[];
-
 ENTRY_FUNCTION(start_imx25_karo_tx25, r0, r1, r2)
 {
-	void *fdt;
-
 	arm_setup_stack(MX25_IRAM_BASE_ADDR + MX25_IRAM_SIZE);
 
-	fdt = __dtb_imx25_karo_tx25_start + get_runtime_offset();
-
-	karo_tx25_common_init(fdt);
+	karo_tx25_common_init();
 }
diff --git a/arch/arm/boards/phytec-phycard-imx27/lowlevel.c b/arch/arm/boards/phytec-phycard-imx27/lowlevel.c
index bd46df0962..40d39680fd 100644
--- a/arch/arm/boards/phytec-phycard-imx27/lowlevel.c
+++ b/arch/arm/boards/phytec-phycard-imx27/lowlevel.c
@@ -77,7 +77,24 @@ static void sdram_init(int sdram)
 			MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
 }
 
-static void __bare_init __naked phytec_phycard_imx27_common_init(void *fdt, int sdram)
+extern char __dtb_imx27_phytec_phycard_s_rdk_bb_start[];
+
+static void __noreturn phytec_phycard_imx27_start(void)
+{
+	void *fdt;
+
+	fdt = __dtb_imx27_phytec_phycard_s_rdk_bb_start + get_runtime_offset();
+
+	imx27_barebox_entry(fdt);
+}
+
+static void __noreturn phytec_phycard_imx27_load_nand(void)
+{
+	imx27_nand_load_image();
+	phytec_phycard_imx27_start();
+}
+
+static noinline void __bare_init phytec_phycard_imx27_common_init(int sdram)
 {
 	unsigned long r;
 
@@ -92,7 +109,7 @@ static void __bare_init __naked phytec_phycard_imx27_common_init(void *fdt, int
 	/* Skip SDRAM initialization if we run from RAM */
         r = get_pc();
         if (r > 0xa0000000 && r < 0xc0000000)
-                imx27_barebox_entry(fdt);
+		phytec_phycard_imx27_start();
 
 	/* 399 MHz */
 	writel(IMX_PLL_PD(0) |
@@ -117,29 +134,20 @@ static void __bare_init __naked phytec_phycard_imx27_common_init(void *fdt, int
 
 	sdram_init(sdram);
 
-	imx27_barebox_boot_nand_external(fdt);
+	imx27_nand_relocate_to_sdram(phytec_phycard_imx27_load_nand);
+	phytec_phycard_imx27_start();
 }
 
-extern char __dtb_imx27_phytec_phycard_s_rdk_bb_start[];
-
 ENTRY_FUNCTION(start_phytec_phycard_imx27_64mb, r0, r1, r2)
 {
-	void *fdt;
-
 	arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE);
 
-	fdt = __dtb_imx27_phytec_phycard_s_rdk_bb_start + get_runtime_offset();
-
-	phytec_phycard_imx27_common_init(fdt, PHYCARD_MICRON_64MB);
+	phytec_phycard_imx27_common_init(PHYCARD_MICRON_64MB);
 }
 
 ENTRY_FUNCTION(start_phytec_phycard_imx27_128mb, r0, r1, r2)
 {
-	void *fdt;
-
 	arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE);
 
-	fdt = __dtb_imx27_phytec_phycard_s_rdk_bb_start + get_runtime_offset();
-
-	phytec_phycard_imx27_common_init(fdt, PHYCARD_MICRON_128MB);
+	phytec_phycard_imx27_common_init(PHYCARD_MICRON_128MB);
 }
diff --git a/arch/arm/boards/phytec-phycore-imx27/lowlevel.c b/arch/arm/boards/phytec-phycore-imx27/lowlevel.c
index a9e296a0af..b3bebdb6df 100644
--- a/arch/arm/boards/phytec-phycore-imx27/lowlevel.c
+++ b/arch/arm/boards/phytec-phycore-imx27/lowlevel.c
@@ -33,7 +33,24 @@
 
 #define ESDCTL0_VAL (ESDCTL0_SDE | ESDCTL0_ROW13 | ESDCTL0_COL10)
 
-static void __bare_init __naked noinline phytec_phycorce_imx27_common_init(void *fdt)
+extern char __dtb_imx27_phytec_phycore_rdk_start[];
+
+static void __noreturn phytec_phycore_imx27_start(void)
+{
+	void *fdt;
+
+	fdt = __dtb_imx27_phytec_phycore_rdk_start + get_runtime_offset();
+
+	imx27_barebox_entry(fdt);
+}
+
+static void __noreturn phytec_phycore_imx27_load_nand(void)
+{
+	imx27_nand_load_image();
+	phytec_phycore_imx27_start();
+}
+
+static void __bare_init noinline phytec_phycore_imx27_common_init(void)
 {
 	uint32_t r;
 	int i;
@@ -49,7 +66,7 @@ static void __bare_init __naked noinline phytec_phycorce_imx27_common_init(void
 	/* Skip SDRAM initialization if we run from RAM */
 	r = get_pc();
 	if (r > 0xa0000000 && r < 0xb0000000)
-		goto out;
+		phytec_phycore_imx27_start();
 
 	/* re-program the PLL prior(!) starting the SDRAM controller */
 	writel(MPCTL0_VAL, MX27_CCM_BASE_ADDR + MX27_MPCTL0);
@@ -93,22 +110,13 @@ static void __bare_init __naked noinline phytec_phycorce_imx27_common_init(void
 			ESDCTL0_BL | ESDCTL0_SMODE_NORMAL,
 			MX27_ESDCTL_BASE_ADDR + IMX_ESDCTL0);
 
-	if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
-		imx27_barebox_boot_nand_external(fdt);
-
-out:
-	imx27_barebox_entry(fdt);
+	imx27_nand_relocate_to_sdram(phytec_phycore_imx27_load_nand);
+	phytec_phycore_imx27_start();
 }
 
-extern char __dtb_imx27_phytec_phycore_rdk_start[];
-
 ENTRY_FUNCTION(start_phytec_phycore_imx27, r0, r1, r2)
 {
-	void *fdt;
-
 	arm_setup_stack(MX27_IRAM_BASE_ADDR + MX27_IRAM_SIZE);
 
-	fdt = __dtb_imx27_phytec_phycore_rdk_start + get_runtime_offset();
-
-	phytec_phycorce_imx27_common_init(fdt);
+	phytec_phycore_imx27_common_init();
 }
diff --git a/arch/arm/boards/phytec-phycore-imx31/lowlevel.c b/arch/arm/boards/phytec-phycore-imx31/lowlevel.c
index b5f333987a..98e1e8711d 100644
--- a/arch/arm/boards/phytec-phycore-imx31/lowlevel.c
+++ b/arch/arm/boards/phytec-phycore-imx31/lowlevel.c
@@ -127,7 +127,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 #endif
 
 	if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND))
-		imx31_barebox_boot_nand_external(0);
+		imx31_barebox_boot_nand_external();
 	else
 		imx31_barebox_entry(NULL);
 }
diff --git a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c b/arch/arm/boards/phytec-phycore-imx35/lowlevel.c
index b80dafec16..9768009be8 100644
--- a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c
+++ b/arch/arm/boards/phytec-phycore-imx35/lowlevel.c
@@ -186,7 +186,7 @@ void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint
 		r |= 0x1 << 28;
 		writel(r, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4);
 
-		imx35_barebox_boot_nand_external(0);
+		imx35_barebox_boot_nand_external();
 	}
 
 out:
diff --git a/arch/arm/boards/phytec-som-imx8mq/board.c b/arch/arm/boards/phytec-som-imx8mq/board.c
index 4fd098c5f6..7df53a7cfb 100644
--- a/arch/arm/boards/phytec-som-imx8mq/board.c
+++ b/arch/arm/boards/phytec-som-imx8mq/board.c
@@ -10,9 +10,45 @@
 #include <init.h>
 #include <linux/sizes.h>
 #include <mach/bbu.h>
+#include <mfd/pfuze.h>
 
 #include <envfs.h>
 
+#define PFUZE100_DEVICEID	0x0
+#define PFUZE100_REVID		0x3
+
+#define PFUZE100_SW1ABMODE	0x23
+#define PFUZE100_SW2MODE	0x38
+#define PFUZE100_SW1CMODE	0x31
+#define PFUZE100_SW3AVOL	0x3c
+
+#define APS_PFM			0xc
+
+static void imx8mq_setup_pmic_voltages(struct regmap *map)
+{
+	int offset = PFUZE100_SW1CMODE;
+	int switch_num = 6;
+	int val, i;
+
+	regmap_read(map, PFUZE100_SW3AVOL, &val);
+
+	/* ensure the correct VDD_DRAM_0V9 output voltage */
+	regmap_write_bits(map, PFUZE100_SW3AVOL, 0x3f, 0x18);
+
+	/* pfuze200 */
+	regmap_read(map, PFUZE100_DEVICEID, &val);
+	if (val & 0xf) {
+		offset = PFUZE100_SW2MODE;
+		switch_num = 4;
+	}
+
+	/* set all switches APS in normal and PFM mode in standby */
+	regmap_write(map, PFUZE100_SW1ABMODE, APS_PFM);
+
+	for (i = 0; i < switch_num - 1; i++)
+		regmap_write(map, offset + i * 7, APS_PFM);
+}
+
 static int physom_imx8mq_devices_init(void)
 {
 	int flag_emmc = 0;
@@ -23,6 +59,8 @@ static int physom_imx8mq_devices_init(void)
 
 	barebox_set_hostname("phycore-imx8mq");
 
+	pfuze_register_init_callback(imx8mq_setup_pmic_voltages);
+
 	switch (bootsource_get_instance()) {
 	case 0:
 		flag_emmc = BBU_HANDLER_FLAG_DEFAULT;
diff --git a/arch/arm/boards/sama5d27-giantboard/Makefile b/arch/arm/boards/sama5d27-giantboard/Makefile
new file mode 100644
index 0000000000..b08c4a93ca
--- /dev/null
+++ b/arch/arm/boards/sama5d27-giantboard/Makefile
@@ -0,0 +1 @@
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/sama5d27-giantboard/lowlevel.c b/arch/arm/boards/sama5d27-giantboard/lowlevel.c
new file mode 100644
index 0000000000..0236c424c1
--- /dev/null
+++ b/arch/arm/boards/sama5d27-giantboard/lowlevel.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Ahmad Fatoum, Pengutronix
+ */
+
+#include <common.h>
+#include <init.h>
+
+#include <asm/barebox-arm-head.h>
+#include <asm/barebox-arm.h>
+#include <mach/at91_pmc_ll.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <debug_ll.h>
+#include <mach/at91_dbgu.h>
+
+/* PCK = 492MHz, MCK = 164MHz */
+#define MASTER_CLOCK	164000000
+
+static inline void sama5d2_pmc_enable_periph_clock(int clk)
+{
+	at91_pmc_sam9x5_enable_periph_clock(IOMEM(SAMA5D2_BASE_PMC), clk);
+}
+
+static void dbgu_init(void)
+{
+	unsigned mck = MASTER_CLOCK / 2;
+
+	sama5d2_pmc_enable_periph_clock(SAMA5D2_ID_PIOD);
+
+	at91_mux_pio4_set_A_periph(IOMEM(SAMA5D2_BASE_PIOD),
+				   pin_to_mask(AT91_PIN_PD3)); /* DBGU TXD */
+
+	sama5d2_pmc_enable_periph_clock(SAMA5D2_ID_UART1);
+
+	at91_dbgu_setup_ll(IOMEM(SAMA5D2_BASE_UART1), mck, 115200);
+
+	putc_ll('>');
+}
+
+extern char __dtb_z_at91_sama5d27_giantboard_start[];
+
+static noinline void giantboard_entry(void)
+{
+	void *fdt;
+
+	if (IS_ENABLED(CONFIG_DEBUG_LL))
+		dbgu_init();
+
+	fdt = __dtb_z_at91_sama5d27_giantboard_start + get_runtime_offset();
+
+	barebox_arm_entry(SAMA5_DDRCS, SZ_128M, fdt);
+}
+
+ENTRY_FUNCTION(start_sama5d27_giantboard, r0, r1, r2)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
+
+	giantboard_entry();
+}
diff --git a/arch/arm/boards/sama5d27-som1/lowlevel.c b/arch/arm/boards/sama5d27-som1/lowlevel.c
index 7df5a4772d..62d35be912 100644
--- a/arch/arm/boards/sama5d27-som1/lowlevel.c
+++ b/arch/arm/boards/sama5d27-som1/lowlevel.c
@@ -22,8 +22,10 @@
 /* PCK = 492MHz, MCK = 164MHz */
 #define MASTER_CLOCK	164000000
 
-#define sama5d2_pmc_enable_periph_clock(clk) \
-	at91_pmc_sam9x5_enable_periph_clock(IOMEM(SAMA5D2_BASE_PMC), clk)
+static inline void sama5d2_pmc_enable_periph_clock(int clk)
+{
+	at91_pmc_sam9x5_enable_periph_clock(IOMEM(SAMA5D2_BASE_PMC), clk);
+}
 
 static void ek_turn_led(unsigned color)
 {
@@ -63,14 +65,10 @@ static void ek_dbgu_init(void)
 
 extern char __dtb_z_at91_sama5d27_som1_ek_start[];
 
-ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
+static noinline void som1_entry(void)
 {
 	void *fdt;
 
-	arm_cpu_lowlevel_init();
-
-	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE - 16);
-
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
 		ek_dbgu_init();
 
@@ -79,3 +77,12 @@ ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
 	ek_turn_led(RGB_LED_GREEN);
 	barebox_arm_entry(SAMA5_DDRCS, SZ_128M, fdt);
 }
+
+ENTRY_FUNCTION(start_sama5d27_som1_ek, r0, r1, r2)
+{
+	arm_cpu_lowlevel_init();
+
+	arm_setup_stack(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE);
+
+	som1_entry();
+}
diff --git a/arch/arm/boards/scb9328/scb9328.c b/arch/arm/boards/scb9328/scb9328.c
index d1f741a70e..87fb6affbd 100644
--- a/arch/arm/boards/scb9328/scb9328.c
+++ b/arch/arm/boards/scb9328/scb9328.c
@@ -31,6 +31,9 @@
 
 static int scb9328_devices_init(void)
 {
+	if (!of_machine_is_compatible("stx,scb9328"))
+		return 0;
+
 	/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
 	writel(0x1, MX1_SCM_BASE_ADDR + MX1_FMCR);
 
diff --git a/arch/arm/boards/stm32mp157c-dk2/board.c b/arch/arm/boards/stm32mp157c-dk2/board.c
index 9cd5b4ee1f..6da99d9353 100644
--- a/arch/arm/boards/stm32mp157c-dk2/board.c
+++ b/arch/arm/boards/stm32mp157c-dk2/board.c
@@ -14,6 +14,8 @@ static int dk2_postcore_init(void)
 	stm32mp_bbu_mmc_register_handler("sd", "/dev/mmc0.ssbl",
 					 BBU_HANDLER_FLAG_DEFAULT);
 
+	barebox_set_model("STM32MP157C-DK2");
+
 	return 0;
 }
 postcore_initcall(dk2_postcore_init);
diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
index 3b52644e43..203a4afc47 100644
--- a/arch/arm/cpu/lowlevel.S
+++ b/arch/arm/cpu/lowlevel.S
@@ -57,8 +57,10 @@ THUMB(	orr	r12, r12, #PSR_T_BIT	)
 	bic	r12, r12, #(CR_M | CR_C | CR_B)
 	bic	r12, r12, #(CR_S | CR_R | CR_V)
 
+#ifndef CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND
 	/* enable instruction cache */
 	orr	r12, r12, #CR_I
+#endif
 
 #if __LINUX_ARM_ARCH__ >= 6
 	orr	r12, r12, #CR_U
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index e8dca0b851..20eafb6afd 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -137,6 +137,7 @@ lwl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \
 lwl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
 lwl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
 lwl-dtb-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
+lwl-dtb-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
 lwl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
 lwl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
 
diff --git a/arch/arm/dts/at91-sama5d27_giantboard.dts b/arch/arm/dts/at91-sama5d27_giantboard.dts
new file mode 100644
index 0000000000..940379e430
--- /dev/null
+++ b/arch/arm/dts/at91-sama5d27_giantboard.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifer: GPL-2.0-or-later OR X11
+/*
+ * at91-sama5d27_giantboard.dts - Device Tree file for SAMA5D27 Giant Board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ *                2019 Ahmad Fatoum <a.fatoum@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include <arm/sama5d2.dtsi>
+#include <arm/sama5d2-pinfunc.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Giant Board";
+	compatible = "groboards,sama5d27-giantboard", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		orange {
+			label = "orange";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	dmas = <0>, <0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	dmas = <0>, <0>;
+	i2c-sda-hold-time-ns = <350>;
+	status = "okay";
+
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+		active-semi,vsel-low;
+
+		regulators {
+			vdd_1v8_reg: REG_DCDC1 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-min-microvolt=<1850000>;
+					regulator-suspend-max-microvolt=<1850000>;
+					regulator-changeable-in-suspend;
+					regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				};
+			};
+
+			vdd_1v2_reg: REG_DCDC2 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_3v3_reg: REG_DCDC3 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_fuse_reg: REG_LDO1 {
+				regulator-name = "VDD_FUSE";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_3v3_lp_reg: REG_LDO2 {
+				regulator-name = "VDD_3V3_LP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_led_reg: REG_LDO3 {
+				regulator-name = "VDD_LED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_sdhc_1v8_reg: REG_LDO4 {
+				regulator-name = "VDD_SDHC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		charger {
+			compatible = "active-semi,act8945a-charger";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+			interrupt-parent = <&pioA>;
+			interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+			active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+			active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+			active-semi,input-voltage-threshold-microvolt = <6600>;
+			active-semi,precondition-timeout = <40>;
+			active-semi,total-timeout = <3>;
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3_reg>;
+	vref-supply = <&vdd_3v3_reg>;
+	status = "disabled";
+};
+
+&pioA {
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PB31__TWD0>,
+			 <PIN_PC0__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD4__TWD1>,
+			 <PIN_PD5__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-pull-up;
+		};
+
+		conf-ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+			<PIN_PA30__SDMMC1_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi0_default: spi0_default {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA15__SPI0_MOSI>,
+			 <PIN_PA16__SPI0_MISO>;
+		bias-disable;
+	};
+
+	pinctrl_uart1_default: uart1_default {
+		pinmux = <PIN_PD2__URXD1>,
+			 <PIN_PD3__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_charger_chglev: charger_chglev {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_charger_irq: charger_irq {
+		pinmux = <PIN_PB13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_charger_lbo: charger_lbo {
+		pinmux = <PIN_PC8__GPIO>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index 32b3f40769..23e43701f3 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -129,14 +129,6 @@
 	};
 };
 
-&qflash0 {
-	compatible = "jedec,spi-nor";
-};
-
-&qflash1 {
-	compatible = "jedec,spi-nor";
-};
-
 &usb0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/dts/imx25.dtsi b/arch/arm/dts/imx25.dtsi
index e72dbd5f36..05678af71a 100644
--- a/arch/arm/dts/imx25.dtsi
+++ b/arch/arm/dts/imx25.dtsi
@@ -24,11 +24,3 @@
 &usbmisc {
 	status = "okay";
 };
-
-&usbotg {
-	over-current-active-high;
-};
-
-&usbhost1 {
-	over-current-active-high;
-};
diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp151.dtsi
index e416c89856..e416c89856 100644
--- a/arch/arm/dts/stm32mp157c.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
diff --git a/arch/arm/dts/stm32mp157a-dk1.dtsi b/arch/arm/dts/stm32mp157a-dk1.dtsi
index 6be208f32e..baaf60b18f 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1.dtsi
@@ -4,7 +4,7 @@
  * Author: Alexandre Torgue <alexandre.torgue@st.com>.
  */
 
-#include "stm32mp157c.dtsi"
+#include "stm32mp151.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
index 8b2ecd9ab2..599852d644 100644
--- a/arch/arm/include/asm/barebox-arm.h
+++ b/arch/arm/include/asm/barebox-arm.h
@@ -119,7 +119,7 @@ void *barebox_arm_boot_dtb(void);
 static inline unsigned long arm_mem_stack_top(unsigned long membase,
 					      unsigned long endmem)
 {
-	if (IS_ENABLED(CONFIG_BOOTM_OPTEE))
+	if (IS_ENABLED(CONFIG_BOOTM_OPTEE) || IS_ENABLED(CONFIG_PBL_OPTEE))
 		endmem -= OPTEE_SIZE;
 
 	return endmem - SZ_64K;
diff --git a/arch/arm/include/asm/setjmp.h b/arch/arm/include/asm/setjmp.h
new file mode 100644
index 0000000000..62bac613d6
--- /dev/null
+++ b/arch/arm/include/asm/setjmp.h
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ * (C) Copyright 2016 Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef _SETJMP_H_
+#define _SETJMP_H_	1
+
+#include <asm/types.h>
+
+/*
+ * This really should be opaque, but the EFI implementation wrongly
+ * assumes that a 'struct jmp_buf_data' is defined.
+ */
+struct jmp_buf_data {
+#if defined(__aarch64__)
+	u64  regs[13];
+#else
+	u32  regs[10];  /* r4-r9, sl, fp, sp, lr */
+#endif
+};
+
+typedef struct jmp_buf_data jmp_buf[1];
+
+int setjmp(jmp_buf jmp);
+void longjmp(jmp_buf jmp, int ret);
+
+#endif /* _SETJMP_H_ */
diff --git a/arch/arm/lib32/Makefile b/arch/arm/lib32/Makefile
index cd43147e66..597bc07905 100644
--- a/arch/arm/lib32/Makefile
+++ b/arch/arm/lib32/Makefile
@@ -28,3 +28,7 @@ extra-y += barebox.lds
 pbl-y	+= lib1funcs.o
 pbl-y	+= ashldi3.o
 pbl-y	+= div0.o
+
+obj-pbl-y	+= setjmp.o
+
+pbl-$(CONFIG_PBL_OPTEE)	+= optee-early.o
diff --git a/arch/arm/lib32/bootm.c b/arch/arm/lib32/bootm.c
index 180624445d..d64e705c40 100644
--- a/arch/arm/lib32/bootm.c
+++ b/arch/arm/lib32/bootm.c
@@ -137,16 +137,10 @@ static int get_kernel_addresses(size_t image_size,
 static int optee_verify_header_request_region(struct image_data *data, struct optee_header *hdr)
 {
 	int ret = 0;
-	if (hdr->magic != OPTEE_MAGIC) {
-		pr_err("Invalid header magic 0x%08x, expected 0x%08x\n",
-		       hdr->magic, OPTEE_MAGIC);
-		return -EINVAL;
-	}
 
-	if (hdr->arch != OPTEE_ARCH_ARM32 || hdr->init_load_addr_hi) {
-		pr_err("Only 32bit supported\n");
-		return -EINVAL;
-	}
+	ret = optee_verify_header(hdr);
+	if (ret < 0)
+		return ret;
 
 	data->tee_res = request_sdram_region("TEE", hdr->init_load_addr_lo, hdr->init_size);
 	if (!data->tee_res) {
diff --git a/arch/arm/lib32/optee-early.c b/arch/arm/lib32/optee-early.c
new file mode 100644
index 0000000000..197325b8a0
--- /dev/null
+++ b/arch/arm/lib32/optee-early.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * optee-early.c - start OP-TEE during PBL
+ *
+ * Copyright (c) 2019 Rouven Czerwinski <r.czerwinski@pengutronix.de>, Pengutronix
+ *
+ */
+#include <asm/cache.h>
+#include <asm/setjmp.h>
+#include <tee/optee.h>
+#include <debug_ll.h>
+
+static jmp_buf tee_buf;
+
+int start_optee_early(void *fdt, void *tee)
+{
+	void (*tee_start)(void *r0, void *r1, void *r2);
+	struct optee_header *hdr;
+	int ret;
+
+	hdr = tee;
+	ret = optee_verify_header(hdr);
+	if (ret < 0)
+		return ret;
+
+	memcpy((void *)hdr->init_load_addr_lo, tee + sizeof(*hdr), hdr->init_size);
+	tee_start = (void *) hdr->init_load_addr_lo;
+
+	/* We use setjmp/longjmp here because OP-TEE clobbers most registers */
+	ret = setjmp(tee_buf);
+	if (ret == 0) {
+		sync_caches_for_execution();
+		tee_start(0, 0, fdt);
+		longjmp(tee_buf, 1);
+	}
+
+	return 0;
+}
diff --git a/arch/arm/lib32/setjmp.S b/arch/arm/lib32/setjmp.S
new file mode 100644
index 0000000000..f0606a7f66
--- /dev/null
+++ b/arch/arm/lib32/setjmp.S
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <config.h>
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+
+.pushsection .text.setjmp, "ax"
+ENTRY(setjmp)
+	/*
+	 * A subroutine must preserve the contents of the registers
+	 * r4-r8, r10, r11 (v1-v5, v7 and v8) and SP (and r9 in PCS
+	 * variants that designate r9 as v6).
+	 */
+	mov  ip, sp
+	stm  a1, {v1-v8, ip, lr}
+	mov  a1, #0
+	bx   lr
+ENDPROC(setjmp)
+.popsection
+
+.pushsection .text.longjmp, "ax"
+ENTRY(longjmp)
+	ldm  a1, {v1-v8, ip, lr}
+	mov  sp, ip
+	mov  a1, a2
+	/* If we were passed a return value of zero, return one instead */
+	cmp  a1, #0
+	bne  1f
+	mov  a1, #1
+1:
+	bx   lr
+ENDPROC(longjmp)
+.popsection
diff --git a/arch/arm/lib64/Makefile b/arch/arm/lib64/Makefile
index 5068431342..69cb3d8ea1 100644
--- a/arch/arm/lib64/Makefile
+++ b/arch/arm/lib64/Makefile
@@ -5,5 +5,6 @@ obj-$(CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS)	+= memcpy.o
 obj-$(CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS)	+= memset.o string.o
 extra-y += barebox.lds
 obj-pbl-y   += runtime-offset.o
+obj-pbl-y   += setjmp.o
 
 pbl-y	+= div0.o pbl.o
diff --git a/arch/arm/lib64/armlinux.c b/arch/arm/lib64/armlinux.c
index 31bd987f10..bcff770793 100644
--- a/arch/arm/lib64/armlinux.c
+++ b/arch/arm/lib64/armlinux.c
@@ -33,6 +33,8 @@
 
 static int do_bootm_linux(struct image_data *data)
 {
+	const void *kernel_header =
+			data->os_fit ? data->fit_kernel : data->os_header;
 	void (*fn)(unsigned long dtb, unsigned long x1, unsigned long x2,
 		       unsigned long x3);
 	resource_size_t start, end;
@@ -41,8 +43,8 @@ static int do_bootm_linux(struct image_data *data)
 	int ret;
 	void *fdt;
 
-	text_offset = le64_to_cpup(data->os_header + 8);
-	image_size = le64_to_cpup(data->os_header + 16);
+	text_offset = le64_to_cpup(kernel_header + 8);
+	image_size = le64_to_cpup(kernel_header+ 16);
 
 	ret = memory_bank_first_find_space(&start, &end);
 	if (ret)
@@ -101,6 +103,12 @@ static struct image_handler aarch64_linux_handler = {
         .filetype = filetype_arm64_linux_image,
 };
 
+static struct image_handler aarch64_fit_handler = {
+	.name = "FIT image",
+	.bootm = do_bootm_linux,
+	.filetype = filetype_oftree,
+};
+
 static int do_bootm_barebox(struct image_data *data)
 {
 	void (*fn)(unsigned long x0, unsigned long x1, unsigned long x2,
@@ -144,6 +152,9 @@ static int aarch64_register_image_handler(void)
 	register_image_handler(&aarch64_linux_handler);
 	register_image_handler(&aarch64_barebox_handler);
 
+	if (IS_ENABLED(CONFIG_FITIMAGE))
+		register_image_handler(&aarch64_fit_handler);
+
 	return 0;
 }
 late_initcall(aarch64_register_image_handler);
diff --git a/arch/arm/lib64/setjmp.S b/arch/arm/lib64/setjmp.S
new file mode 100644
index 0000000000..a7f6d05417
--- /dev/null
+++ b/arch/arm/lib64/setjmp.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+.pushsection .text.setjmp, "ax"
+ENTRY(setjmp)
+	/* Preserve all callee-saved registers and the SP */
+	stp  x19, x20, [x0,#0]
+	stp  x21, x22, [x0,#16]
+	stp  x23, x24, [x0,#32]
+	stp  x25, x26, [x0,#48]
+	stp  x27, x28, [x0,#64]
+	stp  x29, x30, [x0,#80]
+	mov  x2, sp
+	str  x2, [x0, #96]
+	mov  x0, #0
+	ret
+ENDPROC(setjmp)
+.popsection
+
+.pushsection .text.longjmp, "ax"
+ENTRY(longjmp)
+	ldp  x19, x20, [x0,#0]
+	ldp  x21, x22, [x0,#16]
+	ldp  x23, x24, [x0,#32]
+	ldp  x25, x26, [x0,#48]
+	ldp  x27, x28, [x0,#64]
+	ldp  x29, x30, [x0,#80]
+	ldr  x2, [x0,#96]
+	mov  sp, x2
+	/* Move the return value in place, but return 1 if passed 0. */
+	adds x0, xzr, x1
+	csinc x0, x0, xzr, ne
+	ret
+ENDPROC(longjmp)
+.popsection
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5267102bf9..eb14cd2c28 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,12 +41,16 @@ config AT91SAM926X_BOARD_INIT
 config AT91SAM9_SMC
 	bool
 
+config HAVE_AT91SAM9_RST
+	bool
+
 config SOC_AT91SAM9
 	bool
 	select CPU_ARM926T
 	select AT91SAM9_SMC
 	select CLOCKSOURCE_ATMEL_PIT
 	select PINCTRL
+	select HAVE_AT91SAM9_RST
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_UTMI
@@ -54,6 +58,7 @@ config SOC_AT91SAM9
 
 config SOC_SAMA5
 	bool
+	select HAVE_AT91SAM9_RST
 	select CPU_V7
 
 config SOC_SAMA5D2
@@ -582,6 +587,14 @@ config MACH_SAMA5D27_SOM1
 	help
 	  Select this if you are using Microchip's sama5d27 SoM evaluation kit
 
+config MACH_SAMA5D27_GIANTBOARD
+	bool "Groboards SAMA5D27 Giant Board"
+	select SOC_SAMA5D2
+	select OFDEVICE
+	select COMMON_CLK_OF_PROVIDER
+	help
+	  Select this if you are using the Groboards sama5d27 Giantboard
+
 endif
 
 comment "AT91 Board Options"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 66d0b700f6..89aff54b8a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-y += at91sam9_reset.o
 obj-y += at91sam9g45_reset.o
 
 obj-$(CONFIG_AT91SAM9_SMC) += sam9_smc.o
+obj-$(CONFIG_HAVE_AT91SAM9_RST) += at91sam9_rst.o
 
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
diff --git a/arch/arm/mach-at91/at91sam9_rst.c b/arch/arm/mach-at91/at91sam9_rst.c
new file mode 100644
index 0000000000..8f03576e69
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9_rst.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Pengutronix, Ahmad Fatoum <a.fatoum@pengutronix.de>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <restart.h>
+#include <linux/clk.h>
+#include <mach/at91_rstc.h>
+
+struct at91sam9x_rst {
+	struct restart_handler restart;
+	void __iomem *base;
+};
+
+static void __noreturn at91sam9x_restart_soc(struct restart_handler *rst)
+{
+	struct at91sam9x_rst *priv = container_of(rst, struct at91sam9x_rst, restart);
+
+	writel(AT91_RSTC_PROCRST
+	       | AT91_RSTC_PERRST
+	       | AT91_RSTC_EXTRST
+	       | AT91_RSTC_KEY,
+	       priv->base + AT91_RSTC_CR);
+
+	hang();
+}
+
+static int at91sam9x_rst_probe(struct device_d *dev)
+{
+	struct at91sam9x_rst *priv;
+	struct resource *iores;
+	struct clk *clk;
+
+	iores = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(iores)) {
+		dev_err(dev, "could not get reset memory region\n");
+		return PTR_ERR(iores);
+	}
+
+	priv = xzalloc(sizeof(*priv));
+	priv->base = IOMEM(iores->start);
+
+	clk = clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		release_region(iores);
+		free(priv);
+		return PTR_ERR(clk);
+	}
+
+	clk_enable(clk);
+
+	priv->restart.name = "at91sam9x-rst";
+	priv->restart.restart = at91sam9x_restart_soc;
+
+	return restart_handler_register(&priv->restart);
+}
+
+static const __maybe_unused struct of_device_id at91sam9x_rst_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g45-rstc", },
+	{ .compatible = "atmel,sama5d3-rstc", },
+	{ /* sentinel */ },
+};
+
+static struct driver_d at91sam9x_rst_driver = {
+	.name		= "at91sam9x-rst",
+	.of_compatible	= DRV_OF_COMPAT(at91sam9x_rst_dt_ids),
+	.probe		= at91sam9x_rst_probe,
+};
+device_platform_driver(at91sam9x_rst_driver);
diff --git a/arch/arm/mach-imx/external-nand-boot.c b/arch/arm/mach-imx/external-nand-boot.c
index c4d61aa786..123589c071 100644
--- a/arch/arm/mach-imx/external-nand-boot.c
+++ b/arch/arm/mach-imx/external-nand-boot.c
@@ -134,12 +134,13 @@ static noinline void __bare_init imx_nandboot_get_page(void *regs, int v1,
 	imx_nandboot_send_page(regs, v1, NFC_OUTPUT, pagesize_2k);
 }
 
-static void __bare_init imx_nand_load_image(void *dest, int v1, int size,
+static void __bare_init imx_nand_load_image(void *dest, int v1,
 					    void __iomem *base, int pagesize_2k)
 {
 	u32 tmp, page, block, blocksize, pagesize, badblocks;
 	int bbt = 0;
 	void *regs, *spare0;
+	int size = *(uint32_t *)(dest + 0x2c);
 
 	if (pagesize_2k) {
 		pagesize = 2048;
@@ -239,143 +240,188 @@ static void __bare_init imx_nand_load_image(void *dest, int v1, int size,
 	}
 }
 
-static void BARE_INIT_FUNCTION(imx25_nand_load_image)(void *dest, int size,
-                void __iomem *base, int pagesize_2k)
+void BARE_INIT_FUNCTION(imx25_nand_load_image)(void)
 {
-        imx_nand_load_image(dest, 0, size, base, pagesize_2k);
+	void *sdram = (void *)MX25_CSD0_BASE_ADDR;
+	void __iomem *nfc_base = IOMEM(MX25_NFC_BASE_ADDR);
+	bool pagesize_2k;
+
+	if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 8))
+		pagesize_2k = true;
+	else
+		pagesize_2k = false;
+
+	imx_nand_load_image(sdram, 0, nfc_base, pagesize_2k);
 }
 
-static void BARE_INIT_FUNCTION(imx27_nand_load_image)(void *dest, int size,
-                void __iomem *base, int pagesize_2k)
+void BARE_INIT_FUNCTION(imx27_nand_load_image)(void)
 {
-        imx_nand_load_image(dest, 1, size, base, pagesize_2k);
+	void *sdram = (void *)MX27_CSD0_BASE_ADDR;
+	void __iomem *nfc_base = IOMEM(MX27_NFC_BASE_ADDR);
+	bool pagesize_2k;
+
+	if (readl(MX27_SYSCTRL_BASE_ADDR + 0x14) & (1 << 5))
+		pagesize_2k = true;
+	else
+		pagesize_2k = false;
+
+	imx_nand_load_image(sdram, 1, nfc_base, pagesize_2k);
 }
 
-static void BARE_INIT_FUNCTION(imx31_nand_load_image)(void *dest, int size,
-                void __iomem *base, int pagesize_2k)
+void BARE_INIT_FUNCTION(imx31_nand_load_image)(void)
 {
-        imx_nand_load_image(dest, 1, size, base, pagesize_2k);
+	void *sdram = (void *)MX31_CSD0_BASE_ADDR;
+	void __iomem *nfc_base = IOMEM(MX31_NFC_BASE_ADDR);
+	bool pagesize_2k;
+
+	if (readl(MX31_CCM_BASE_ADDR + MX31_CCM_RCSR) & MX31_RCSR_NFMS)
+		pagesize_2k = true;
+	else
+		pagesize_2k = false;
+
+	imx_nand_load_image(sdram, 1, nfc_base, pagesize_2k);
 }
 
-static void BARE_INIT_FUNCTION(imx35_nand_load_image)(void *dest, int size,
-                void __iomem *base, int pagesize_2k)
+void BARE_INIT_FUNCTION(imx35_nand_load_image)(void)
 {
-        imx_nand_load_image(dest, 0, size, base, pagesize_2k);
+	void *sdram = (void *)MX35_CSD0_BASE_ADDR;
+	void __iomem *nfc_base = IOMEM(MX35_NFC_BASE_ADDR);
+	bool pagesize_2k;
+
+	if (readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR) & (1 << 8))
+		pagesize_2k = true;
+	else
+		pagesize_2k = false;
+
+	imx_nand_load_image(sdram, 0, nfc_base, pagesize_2k);
 }
 
-static inline int imx25_pagesize_2k(void)
+/*
+ * relocate_to_sdram - move ourselves out of NFC SRAM
+ *
+ * @nfc_base: base address of the NFC controller
+ * @sdram: SDRAM base address where we move ourselves to
+ * @fn: Function we continue with when running in SDRAM
+ *
+ * This function moves ourselves out of NFC SRAM to SDRAM. In case we a currently
+ * not running in NFC SRAM this function returns. If running in NFC SRAM, this
+ * function will not return, but call @fn instead.
+ */
+static void BARE_INIT_FUNCTION(relocate_to_sdram)(unsigned long nfc_base,
+						  unsigned long sdram,
+						  void __noreturn (*fn)(void))
 {
-	if (readl(MX25_CCM_BASE_ADDR + MX25_CCM_RCSR) & (1 << 8))
-		return 1;
-	else
-		return 0;
+	unsigned long __fn;
+	u32 r;
+	u32 *src, *trg;
+	int i;
+
+	/* skip NAND boot if not running from NFC space */
+	r = get_pc();
+	if (r < nfc_base || r > nfc_base + 0x800)
+		return;
+
+	src = (unsigned int *)nfc_base;
+	trg = (unsigned int *)sdram;
+
+	/*
+	 * Copy initial binary portion from NFC SRAM to beginning of
+	 * SDRAM
+	 */
+	for (i = 0; i < 0x800 / sizeof(int); i++)
+		*trg++ = *src++;
+
+	/* The next function we jump to */
+	__fn = (unsigned long)fn;
+	/* mask out TEXT_BASE */
+	__fn &= 0x7ff;
+	/*
+	 * and add sdram base instead where we copied the initial
+	 * binary above
+	 */
+	__fn += sdram;
+
+	fn = (void *)__fn;
+
+	fn();
 }
 
-static inline int imx27_pagesize_2k(void)
+void BARE_INIT_FUNCTION(imx25_nand_relocate_to_sdram)(void __noreturn (*fn)(void))
 {
-	if (readl(MX27_SYSCTRL_BASE_ADDR + 0x14) & (1 << 5))
-		return 1;
-	else
-		return 0;
+	unsigned long nfc_base = MX25_NFC_BASE_ADDR;
+	unsigned long sdram = MX25_CSD0_BASE_ADDR;
+
+	relocate_to_sdram(nfc_base, sdram, fn);
 }
 
-static inline int imx31_pagesize_2k(void)
+static void __noreturn BARE_INIT_FUNCTION(imx25_boot_nand_external_cont)(void)
 {
-	if (readl(MX31_CCM_BASE_ADDR + MX31_CCM_RCSR) & MX31_RCSR_NFMS)
-		return 1;
-	else
-		return 0;
+	imx25_nand_load_image();
+	imx25_barebox_entry(NULL);
 }
 
-static inline int imx35_pagesize_2k(void)
+void __noreturn BARE_INIT_FUNCTION(imx25_barebox_boot_nand_external)(void)
 {
-	if (readl(MX35_CCM_BASE_ADDR + MX35_CCM_RCSR) & (1 << 8))
-		return 1;
-	else
-		return 0;
+	imx25_nand_relocate_to_sdram(imx25_boot_nand_external_cont);
+	imx25_barebox_entry(NULL);
 }
 
-/*
- * SoC specific entries for booting in external NAND mode. To be called from
- * the board specific entry code. This is safe to call even if not booting from
- * NAND. In this case the booting is continued without loading an image from
- * NAND. This function needs a stack to be set up.
- */
+void BARE_INIT_FUNCTION(imx27_nand_relocate_to_sdram)(void __noreturn (*fn)(void))
+{
+	unsigned long nfc_base = MX27_NFC_BASE_ADDR;
+	unsigned long sdram = MX27_CSD0_BASE_ADDR;
+
+	relocate_to_sdram(nfc_base, sdram, fn);
+}
+
+static void __noreturn BARE_INIT_FUNCTION(imx27_boot_nand_external_cont)(void)
+{
+	imx27_nand_load_image();
+	imx27_barebox_entry(NULL);
+}
+
+void __noreturn BARE_INIT_FUNCTION(imx27_barebox_boot_nand_external)(void)
+{
+	imx27_nand_relocate_to_sdram(imx27_boot_nand_external_cont);
+	imx27_barebox_entry(NULL);
+}
 
-#define DEFINE_EXTERNAL_NAND_ENTRY(soc)					\
-									\
-static void __noreturn BARE_INIT_FUNCTION(imx##soc##_boot_nand_external_cont)  \
-			(void *boarddata)				\
-{									\
-	unsigned long nfc_base = MX##soc##_NFC_BASE_ADDR;		\
-	void *sdram = (void *)MX##soc##_CSD0_BASE_ADDR;			\
-	uint32_t image_size, r;						\
-									\
-	image_size = *(uint32_t *)(sdram + 0x2c);			\
-									\
-	r = get_cr();							\
-	r |= CR_I;							\
-	set_cr(r);							\
-									\
-	imx##soc##_nand_load_image(sdram,				\
-			image_size,					\
-			(void *)nfc_base,				\
-			imx##soc##_pagesize_2k());			\
-									\
-        imx##soc##_barebox_entry(boarddata);				\
-}									\
-									\
-void __noreturn BARE_INIT_FUNCTION(imx##soc##_barebox_boot_nand_external) \
-			(void *bd)				\
-{									\
-	unsigned long nfc_base = MX##soc##_NFC_BASE_ADDR;		\
-	unsigned long sdram = MX##soc##_CSD0_BASE_ADDR;			\
-	unsigned long boarddata = (unsigned long)bd;			\
-	unsigned long __fn;						\
-	u32 r;								\
-	u32 *src, *trg;							\
-	int i;								\
-	void __noreturn (*fn)(void *);					\
-									\
-	r = get_cr();							\
-	r &= ~CR_I;							\
-	set_cr(r);							\
-	/* skip NAND boot if not running from NFC space */		\
-	r = get_pc();							\
-	if (r < nfc_base || r > nfc_base + 0x800)			\
-		imx##soc##_barebox_entry(bd);				\
-									\
-	src = (unsigned int *)nfc_base;					\
-	trg = (unsigned int *)sdram;					\
-									\
-	/*								\
-	 * Copy initial binary portion from NFC SRAM to beginning of	\
-	 * SDRAM							\
-	 */								\
-	for (i = 0; i < 0x800 / sizeof(int); i++)			\
-		*trg++ = *src++;					\
-									\
-	/* The next function we jump to */				\
-	__fn = (unsigned long)imx##soc##_boot_nand_external_cont;	\
-	/* mask out TEXT_BASE */					\
-	__fn &= 0x7ff;							\
-	/*								\
-	 * and add sdram base instead where we copied the initial	\
-	 * binary above							\
-	 */								\
-	__fn += sdram;							\
-									\
-	fn = (void *)__fn;						\
-									\
-	if (boarddata > nfc_base && boarddata < nfc_base + SZ_512K) {	\
-		boarddata &= SZ_512K - 1;				\
-		boarddata += sdram;					\
-	}								\
-									\
-	fn((void *)boarddata);						\
+void BARE_INIT_FUNCTION(imx31_nand_relocate_to_sdram)(void __noreturn (*fn)(void))
+{
+	unsigned long nfc_base = MX31_NFC_BASE_ADDR;
+	unsigned long sdram = MX31_CSD0_BASE_ADDR;
+
+	relocate_to_sdram(nfc_base, sdram, fn);
+}
+
+static void __noreturn BARE_INIT_FUNCTION(imx31_boot_nand_external_cont)(void)
+{
+	imx31_nand_load_image();
+	imx31_barebox_entry(NULL);
 }
 
-DEFINE_EXTERNAL_NAND_ENTRY(25)
-DEFINE_EXTERNAL_NAND_ENTRY(27)
-DEFINE_EXTERNAL_NAND_ENTRY(31)
-DEFINE_EXTERNAL_NAND_ENTRY(35)
+void __noreturn BARE_INIT_FUNCTION(imx31_barebox_boot_nand_external)(void)
+{
+	imx31_nand_relocate_to_sdram(imx31_boot_nand_external_cont);
+	imx31_barebox_entry(NULL);
+}
+
+void BARE_INIT_FUNCTION(imx35_nand_relocate_to_sdram)(void __noreturn (*fn)(void))
+{
+	unsigned long nfc_base = MX35_NFC_BASE_ADDR;
+	unsigned long sdram = MX35_CSD0_BASE_ADDR;
+
+	relocate_to_sdram(nfc_base, sdram, fn);
+}
+
+static void __noreturn BARE_INIT_FUNCTION(imx35_boot_nand_external_cont)(void)
+{
+	imx35_nand_load_image();
+	imx35_barebox_entry(NULL);
+}
+
+void __noreturn BARE_INIT_FUNCTION(imx35_barebox_boot_nand_external)(void)
+{
+	imx35_nand_relocate_to_sdram(imx35_boot_nand_external_cont);
+	imx35_barebox_entry(NULL);
+}
diff --git a/arch/arm/mach-imx/imx6.c b/arch/arm/mach-imx/imx6.c
index e1c8214568..6a9ea23c71 100644
--- a/arch/arm/mach-imx/imx6.c
+++ b/arch/arm/mach-imx/imx6.c
@@ -11,6 +11,7 @@
  *
  */
 
+#include <abort.h>
 #include <init.h>
 #include <common.h>
 #include <io.h>
@@ -27,8 +28,7 @@
 #include <mach/usb.h>
 #include <asm/mmu.h>
 #include <asm/cache-l2x0.h>
-
-#include <poweroff.h>
+#include <mfd/pfuze.h>
 
 #define CLPCR				0x54
 #define BP_CLPCR_LPM(mode)		((mode) & 0x3)
@@ -204,6 +204,11 @@ u64 imx6_uid(void)
 	return imx_ocotp_read_uid(IOMEM(MX6_OCOTP_BASE_ADDR));
 }
 
+static void imx6_register_poweroff_init(struct regmap *map)
+{
+	poweroff_handler_register_fn(imx6_pm_stby_poweroff);
+}
+
 int imx6_init(void)
 {
 	const char *cputypestr;
@@ -261,6 +266,8 @@ int imx6_init(void)
 	imx6_setup_ipu_qos();
 	imx6ul_enet_clk_init();
 
+	pfuze_register_init_callback(imx6_register_poweroff_init);
+
 	return 0;
 }
 
@@ -282,6 +289,22 @@ int imx6_devices_init(void)
 	return 0;
 }
 
+static bool imx6_cannot_write_l2x0(void)
+{
+	void __iomem *l2x0_base = IOMEM(0x00a02000);
+	u32 val;
+	/*
+	 * Mask data aborts and try to access the PL210. If OP-TEE is running we
+	 * will receive a data-abort and assume barebox is running in the normal
+	 * world.
+	 */
+	val = readl(l2x0_base + L2X0_PREFETCH_CTRL);
+
+	data_abort_mask();
+	writel(val, l2x0_base + L2X0_PREFETCH_CTRL);
+	return data_abort_unmask();
+}
+
 static int imx6_mmu_init(void)
 {
 	void __iomem *l2x0_base = IOMEM(0x00a02000);
@@ -290,6 +313,9 @@ static int imx6_mmu_init(void)
 	if (!cpu_is_mx6())
 		return 0;
 
+	if (imx6_cannot_write_l2x0())
+		return 0;
+
 	val = readl(l2x0_base + L2X0_CACHE_ID);
 	cache_part = val & L2X0_CACHE_ID_PART_MASK;
 	cache_rtl  = val & L2X0_CACHE_ID_RTL_MASK;
@@ -375,7 +401,7 @@ static int imx6_fixup_cpus_register(void)
 }
 device_initcall(imx6_fixup_cpus_register);
 
-void __noreturn imx6_pm_stby_poweroff(void)
+void __noreturn imx6_pm_stby_poweroff(struct poweroff_handler *handler)
 {
 	void *ccm_base = IOMEM(MX6_CCM_BASE_ADDR);
 	void *gpc_base = IOMEM(MX6_GPC_BASE_ADDR);
diff --git a/arch/arm/mach-imx/include/mach/imx-nand.h b/arch/arm/mach-imx/include/mach/imx-nand.h
index 0adba0989a..f34799a011 100644
--- a/arch/arm/mach-imx/include/mach/imx-nand.h
+++ b/arch/arm/mach-imx/include/mach/imx-nand.h
@@ -3,11 +3,20 @@
 
 #include <linux/mtd/mtd.h>
 
-void imx21_barebox_boot_nand_external(void *boarddata);
-void imx25_barebox_boot_nand_external(void *boarddata);
-void imx27_barebox_boot_nand_external(void *boarddata);
-void imx31_barebox_boot_nand_external(void *boarddata);
-void imx35_barebox_boot_nand_external(void *boarddata);
+void imx25_nand_load_image(void);
+void imx27_nand_load_image(void);
+void imx31_nand_load_image(void);
+void imx35_nand_load_image(void);
+
+void imx25_nand_relocate_to_sdram(void __noreturn (*fn)(void));
+void imx27_nand_relocate_to_sdram(void __noreturn (*fn)(void));
+void imx31_nand_relocate_to_sdram(void __noreturn (*fn)(void));
+void imx35_nand_relocate_to_sdram(void __noreturn (*fn)(void));
+
+void imx25_barebox_boot_nand_external(void);
+void imx27_barebox_boot_nand_external(void);
+void imx31_barebox_boot_nand_external(void);
+void imx35_barebox_boot_nand_external(void);
 void imx_nand_set_layout(int writesize, int datawidth);
 
 struct imx_nand_platform_data {
diff --git a/arch/arm/mach-imx/include/mach/imx6.h b/arch/arm/mach-imx/include/mach/imx6.h
index f0d20833fd..5560774de9 100644
--- a/arch/arm/mach-imx/include/mach/imx6.h
+++ b/arch/arm/mach-imx/include/mach/imx6.h
@@ -6,7 +6,9 @@
 #include <mach/imx6-regs.h>
 #include <mach/revision.h>
 
-void __noreturn imx6_pm_stby_poweroff(void);
+#include <poweroff.h>
+
+void __noreturn imx6_pm_stby_poweroff(struct poweroff_handler *handler);
 
 #define IMX6_ANATOP_SI_REV 0x260
 #define IMX6SL_ANATOP_SI_REV 0x280
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 72b77adc4c..486dfd8253 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -44,6 +44,7 @@ endif
 
 LDFLAGS += $(ldflags-y) -m $(ld-emul)
 LDFLAGS_barebox += $(ldflags-y)
+LDFLAGS_pbl += $(ldflags-y)
 
 #
 # CPU-dependent compiler/assembler options for optimization.
diff --git a/arch/sandbox/mach-sandbox/include/mach/hostfile.h b/arch/sandbox/mach-sandbox/include/mach/hostfile.h
index 627fe28e76..54f690be5f 100644
--- a/arch/sandbox/mach-sandbox/include/mach/hostfile.h
+++ b/arch/sandbox/mach-sandbox/include/mach/hostfile.h
@@ -3,7 +3,7 @@
 
 struct hf_info {
 	int fd;
-	unsigned long base;
+	unsigned long long base;
 	size_t size;
 	const char *devname;
 	const char *filename;
diff --git a/arch/sandbox/os/common.c b/arch/sandbox/os/common.c
index 3ad12b4a30..3f9cc70770 100644
--- a/arch/sandbox/os/common.c
+++ b/arch/sandbox/os/common.c
@@ -112,7 +112,7 @@ uint64_t linux_get_time(void)
 
 	clock_gettime(CLOCK_MONOTONIC, &ts);
 
-	now = ts.tv_sec * 1000 * 1000 * 1000 + ts.tv_nsec;
+	now = ts.tv_sec * 1000ULL * 1000 * 1000 + ts.tv_nsec;
 
 	return now;
 }
diff --git a/commands/boot.c b/commands/boot.c
index 0257b3dd4f..aaa20faae9 100644
--- a/commands/boot.c
+++ b/commands/boot.c
@@ -21,13 +21,29 @@
 
 #include <linux/stat.h>
 
+static char *next_argv(void *context)
+{
+	char ***argv = context;
+	char *next = **argv;
+	(*argv)++;
+	return next;
+}
+
+static char *next_word(void *context)
+{
+	return strsep(context, " ");
+}
+
 static int do_boot(int argc, char *argv[])
 {
 	char *freep = NULL;
 	int opt, ret = 0, do_list = 0, do_menu = 0;
-	int i, dryrun = 0, verbose = 0, timeout = -1;
+	int dryrun = 0, verbose = 0, timeout = -1;
 	struct bootentries *entries;
 	struct bootentry *entry;
+	void *handle;
+	const char *name;
+	char *(*next)(void *);
 
 	while ((opt = getopt(argc, argv, "vldmt:w:")) > 0) {
 		switch (opt) {
@@ -54,31 +70,38 @@ static int do_boot(int argc, char *argv[])
 		}
 	}
 
-	entries = bootentries_alloc();
-
 	if (optind < argc) {
-		for (i = optind; i < argc; i++) {
-			ret = bootentry_create_from_name(entries, argv[i]);
-			if (ret <= 0)
-				printf("Nothing bootable found on '%s'\n", argv[i]);
-	       }
+		handle = &argv[optind];
+		next = next_argv;
 	} else {
 		const char *def;
-		char *sep, *name;
 
 		def = getenv("global.boot.default");
 		if (!def)
 			return 0;
 
-		sep = freep = xstrdup(def);
+		handle = freep = xstrdup(def);
+		next = next_word;
+	}
+
+	entries = bootentries_alloc();
+
+	while ((name = next(&handle)) != NULL) {
+		ret = bootentry_create_from_name(entries, name);
+		if (ret <= 0)
+			printf("Nothing bootable found on '%s'\n", name);
 
-		while ((name = strsep(&sep, " ")) != NULL) {
-			ret = bootentry_create_from_name(entries, name);
-			if (ret <= 0)
-				printf("Nothing bootable found on '%s'\n", name);
+		if (do_list || do_menu)
+			continue;
+
+		bootentries_for_each_entry(entries, entry) {
+			ret = boot_entry(entry, verbose, dryrun);
+			if (!ret)
+				goto out;
 		}
 
-		free(freep);
+		bootentries_free(entries);
+		entries = bootentries_alloc();
 	}
 
 	if (list_empty(&entries->entries)) {
@@ -96,14 +119,9 @@ static int do_boot(int argc, char *argv[])
 		goto out;
 	}
 
-	bootentries_for_each_entry(entries, entry) {
-		ret = boot_entry(entry, verbose, dryrun);
-		if (!ret)
-			break;
-	}
-
 out:
 	bootentries_free(entries);
+	free(freep);
 
 	return ret;
 }
diff --git a/commands/i2c.c b/commands/i2c.c
index 77d65e3fa3..77a8f7ff97 100644
--- a/commands/i2c.c
+++ b/commands/i2c.c
@@ -45,17 +45,37 @@ static int do_i2c_probe(int argc, char *argv[])
 {
 	struct i2c_adapter *adapter = NULL;
 	int startaddr = 4, stopaddr = 0x77;
+	int ret;
 
 	if (argc > 1) {
-		adapter = i2c_get_adapter(simple_strtoul(argv[1], NULL, 0));
+		int busnum;
+
+		ret = kstrtoint(argv[1], 0, &busnum);
+		if (ret) {
+			printf("Cannot parse \"%s\" as a number\n", argv[1]);
+			return ret;
+		}
+
+		adapter = i2c_get_adapter(busnum);
 		if (!adapter)
 			return -ENODEV;
 	}
 
-	if (argc > 2)
-		startaddr = simple_strtol(argv[2], NULL, 0);
-	if (argc > 3)
-		stopaddr = simple_strtol(argv[3], NULL, 0);
+	if (argc > 2) {
+		ret = kstrtoint(argv[2], 0, &startaddr);
+		if (ret) {
+			printf("Cannot parse \"%s\" as a number\n", argv[1]);
+			return ret;
+		}
+	}
+
+	if (argc > 3) {
+		ret = kstrtoint(argv[3], 0, &stopaddr);
+		if (ret) {
+			printf("Cannot parse \"%s\" as a number\n", argv[1]);
+			return ret;
+		}
+	}
 
 	if (stopaddr > 0x7f)
 		stopaddr = 0x7f;
diff --git a/commands/imd.c b/commands/imd.c
index f1a22cef96..fc6cc47231 100644
--- a/commands/imd.c
+++ b/commands/imd.c
@@ -46,6 +46,8 @@ BAREBOX_CMD_HELP_TEXT("Options:")
 BAREBOX_CMD_HELP_OPT ("-t <type>", "only show information of <type>")
 BAREBOX_CMD_HELP_OPT ("-n <no>", "for tags with multiple strings only show string <no>")
 BAREBOX_CMD_HELP_OPT ("-s VARNAME",  "set variable VARNAME instead of showing information")
+BAREBOX_CMD_HELP_OPT ("-V",  "Verify checksum of FILE")
+BAREBOX_CMD_HELP_OPT ("-c", "Create checksum for FILE and write it to the crc32 tag.")
 BAREBOX_CMD_HELP_TEXT("")
 BAREBOX_CMD_HELP_TEXT("Without options all information available is printed. Valid types are:")
 BAREBOX_CMD_HELP_TEXT("release, build, model, of_compatible")
diff --git a/commands/test.c b/commands/test.c
index c4f493860f..86636de1c2 100644
--- a/commands/test.c
+++ b/commands/test.c
@@ -40,6 +40,8 @@ typedef enum {
 	OPT_DIRECTORY,
 	OPT_FILE,
 	OPT_EXISTS,
+	OPT_BLOCK,
+	OPT_CHAR,
 	OPT_SYMBOLIC_LINK,
 	OPT_MAX,
 } test_opts;
@@ -60,6 +62,8 @@ static char *test_options[] = {
 	[OPT_FILE]			= "-f",
 	[OPT_DIRECTORY]			= "-d",
 	[OPT_EXISTS]			= "-e",
+	[OPT_BLOCK]			= "-b",
+	[OPT_CHAR]			= "-c",
 	[OPT_SYMBOLIC_LINK]		= "-L",
 };
 
@@ -129,8 +133,11 @@ static int do_test(int argc, char *argv[])
 		case OPT_ZERO:
 		case OPT_NONZERO:
 			adv = 2;
+			if (left < 2)
+				break;
 			zero = 1;
-			if (ap[1] && *ap[1] != ']' && strlen(ap[1]))
+
+			if (strlen(ap[1]))
 				zero = 0;
 
 			expr = (opt == OPT_ZERO) ? zero : !zero;
@@ -139,9 +146,13 @@ static int do_test(int argc, char *argv[])
 		case OPT_FILE:
 		case OPT_DIRECTORY:
 		case OPT_EXISTS:
+		case OPT_BLOCK:
+		case OPT_CHAR:
 		case OPT_SYMBOLIC_LINK:
 			adv = 2;
-			if (ap[1] && *ap[1] != ']' && strlen(ap[1])) {
+			if (left < 2)
+				break;
+			if (strlen(ap[1])) {
 				expr = (opt == OPT_SYMBOLIC_LINK ? lstat : stat)(ap[1], &statbuf);
 				if (expr < 0) {
 					expr = 0;
@@ -164,16 +175,22 @@ static int do_test(int argc, char *argv[])
 					expr = 1;
 					break;
 				}
+				if (opt == OPT_BLOCK && S_ISBLK(statbuf.st_mode)) {
+					expr = 1;
+					break;
+				}
+				if (opt == OPT_CHAR && S_ISCHR(statbuf.st_mode)) {
+					expr = 1;
+					break;
+				}
 			}
 			break;
 
 		/* three argument options */
 		default:
 			adv = 3;
-			if (left < 3) {
-				expr = 1;
+			if (left < 3)
 				break;
-			}
 
 			a = simple_strtol(ap[0], NULL, 0);
 			b = simple_strtol(ap[2], NULL, 0);
@@ -208,6 +225,11 @@ static int do_test(int argc, char *argv[])
 			}
 		}
 
+		if (left < adv) {
+			printf("test: failed to parse arguments\n");
+			return 1;
+		}
+
 		if (last_cmp == 0)
 			expr = last_expr || expr;
 		else if (last_cmp == 1)
diff --git a/common/Kconfig b/common/Kconfig
index f9ef9bd83b..02ef3631e0 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -69,9 +69,6 @@ config LOGBUF
 config STDDEV
 	bool
 
-config BAREBOX_UPDATE
-	bool
-
 config MENUTREE
 	bool
 	select GLOB
@@ -643,27 +640,6 @@ config BOOTM_FORCE_SIGNED_IMAGES
 	  are refused to boot. Effectively this means only FIT images can be booted
 	  since they are the only supported image type that support signing.
 
-config BOOTM_OPTEE
-	bool
-	prompt "support booting OP-TEE"
-	depends on BOOTM && ARM
-	help
-	  OP-TEE is a trusted execution environment (TEE). With this option
-	  enabled barebox supports starting optee_os as part of the bootm command.
-	  Instead of the kernel bootm starts the optee_os binary which then starts
-	  the kernel in nonsecure mode. Pass the optee_os binary with the -t option
-	  or in the global.bootm.tee variable.
-
-config BOOTM_OPTEE_SIZE
-	hex
-	default 0x02000000
-	prompt "OP-TEE Memory Size"
-	depends on BOOTM_OPTEE
-	help
-	  Size to reserve in main memory for OP-TEE.
-	  Can be smaller than the actual size used by OP-TEE, this is used to prevent
-	  barebox from allocating memory in this area.
-
 config BLSPEC
 	depends on FLEXIBLE_BOOTARGS
 	depends on !SHELL_NONE
@@ -692,7 +668,11 @@ config FLEXIBLE_BOOTARGS
 	  to replace parts of the bootargs string without reconstructing it
 	  completely.
 
+config BAREBOX_UPDATE
+	bool "In-system barebox update infrastructure"
+
 config IMD
+	select CRC32
 	bool "barebox metadata support"
 
 config IMD_TARGET
@@ -1000,6 +980,39 @@ config MACHINE_ID
 	  Note: if no hashable information is available no machine id will be passed
 	  to the kernel.
 
+menu "OP-TEE loading"
+
+config OPTEE_SIZE
+	hex
+	default 0x02000000
+	prompt "OP-TEE Memory Size"
+	depends on BOOTM_OPTEE || PBL_OPTEE
+	help
+	  Size to reserve in main memory for OP-TEE.
+	  Can be smaller than the actual size used by OP-TEE, this is used to prevent
+	  barebox from allocating memory in this area.
+
+config BOOTM_OPTEE
+	bool
+	prompt "support booting OP-TEE"
+	depends on BOOTM && ARM
+	help
+	  OP-TEE is a trusted execution environment (TEE). With this option
+	  enabled barebox supports starting optee_os as part of the bootm command.
+	  Instead of the kernel bootm starts the optee_os binary which then starts
+	  the kernel in nonsecure mode. Pass the optee_os binary with the -t option
+	  or in the global.bootm.tee variable.
+
+config PBL_OPTEE
+	bool "Enable OP-TEE early start"
+	depends on ARM
+	depends on !THUMB2_BAREBOX
+	help
+	  Allows starting OP-TEE during lowlevel initialization of the PBL.
+	  Requires explicit support in the boards lowlevel file.
+
+endmenu
+
 endmenu
 
 menu "Debugging"
diff --git a/common/Makefile b/common/Makefile
index 11c91dd016..84463b4d48 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -67,6 +67,8 @@ obj-$(CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB) += imx-bbu-nand-fcb.o
 obj-$(CONFIG_BOOT)		+= boot.o
 obj-$(CONFIG_SERIAL_DEV_BUS)	+= serdev.o
 obj-$(CONFIG_USBGADGET_START)	+= usbgadget.o
+pbl-$(CONFIG_PBL_OPTEE)		+= optee.o
+obj-$(CONFIG_BOOTM_OPTEE)	+= optee.o
 
 ifdef CONFIG_PASSWORD
 
diff --git a/common/bbu.c b/common/bbu.c
index 00bec32a86..b976b99d7c 100644
--- a/common/bbu.c
+++ b/common/bbu.c
@@ -206,6 +206,10 @@ static int bbu_check_metadata(struct bbu_data *data)
 	if (ret)
 		return ret;
 
+	ret = imd_verify_crc32((void *)data->image, data->len);
+	if (ret == -EILSEQ && !(data->flags & BBU_FLAG_FORCE))
+		return ret;
+
 	return 0;
 }
 
diff --git a/common/globalvar.c b/common/globalvar.c
index a826e1bc12..c87f2c9339 100644
--- a/common/globalvar.c
+++ b/common/globalvar.c
@@ -175,21 +175,24 @@ static int nvvar_device_dispatch(const char *name, struct device_d **dev,
 	return 1;
 }
 
-static int nv_set(struct device_d *dev, struct param_d *p, const char *val)
+static int nv_set(struct device_d *dev, struct param_d *p, const char *name, const char *val)
 {
 	int ret;
 
 	if (!val) {
-		free(p->value);
+		if (p)
+			free(p->value);
 		return 0;
 	}
 
-	ret = dev_set_param(&global_device, p->name, val);
+	ret = dev_set_param(&global_device, name, val);
 	if (ret)
 		return ret;
 
-	free(p->value);
-	p->value = xstrdup(val);
+	if (p) {
+		free(p->value);
+		p->value = xstrdup(val);
+	}
 
 	return 0;
 }
@@ -203,7 +206,7 @@ static int nv_param_set(struct device_d *dev, struct param_d *p, const char *val
 {
 	int ret;
 
-	ret = nv_set(dev, p, val);
+	ret = nv_set(dev, p, p->name, val);
 	if (ret)
 		return ret;
 
@@ -234,7 +237,7 @@ static int __nvvar_add(const char *name, const char *value)
 		return ret;
 
 	if (value)
-		return nv_set(&nv_device, p, value);
+		return nv_set(&nv_device, p, name, value);
 
 	ret = nvvar_device_dispatch(name, &dev, &pname);
 	if (ret > 0)
@@ -242,7 +245,7 @@ static int __nvvar_add(const char *name, const char *value)
 	else
 		value = dev_get_param(&global_device, name);
 
-	if (value) {
+	if (value && p) {
 		free(p->value);
 		p->value = xstrdup(value);
 	}
diff --git a/common/imd-barebox.c b/common/imd-barebox.c
index e9cd37d83e..e5cdfd1aed 100644
--- a/common/imd-barebox.c
+++ b/common/imd-barebox.c
@@ -23,3 +23,4 @@ __BAREBOX_IMD_SECTION(.barebox_imd_end) = {
 
 BAREBOX_IMD_TAG_STRING(imd_build_tag, IMD_TYPE_BUILD, UTS_VERSION, 1);
 BAREBOX_IMD_TAG_STRING(imd_release_tag, IMD_TYPE_RELEASE, UTS_RELEASE, 1);
+BAREBOX_IMD_CRC(imd_crc32, 0x0, 1);
diff --git a/common/imd.c b/common/imd.c
index 913a01de87..9be07fef74 100644
--- a/common/imd.c
+++ b/common/imd.c
@@ -22,6 +22,7 @@
 #include <getopt.h>
 #include <malloc.h>
 #include <fs.h>
+#include <crc.h>
 
 #ifndef CONFIG_CMD_IMD
 int imd_command_setenv(const char *variable_name, const char *value)
@@ -41,7 +42,7 @@ const struct imd_header *imd_next(const struct imd_header *imd)
 
 	length = imd_read_length(imd);
 	length = ALIGN(length, 4);
-	length += 8;
+	length += sizeof(struct imd_header);
 
 	return (const void *)imd + length;
 }
@@ -63,14 +64,14 @@ static int imd_next_validate(const void *buf, int bufsize, int start_ofs)
 
 	size = bufsize - start_ofs;
 
-	if (size < 8) {
+	if (size < sizeof(struct imd_header)) {
 		debug("trunkated tag at offset %dd\n", start_ofs);
 		return -EINVAL;
 	}
 
 	length = imd_read_length(imd);
 	length = ALIGN(length, 4);
-	length += 8;
+	length += sizeof(struct imd_header);
 
 	if (size < length) {
 		debug("tag at offset %d with size %d exceeds bufsize %d\n",
@@ -167,6 +168,9 @@ static struct imd_type_names imd_types[] = {
 	}, {
 		.type = IMD_TYPE_OF_COMPATIBLE,
 		.name = "of_compatible",
+	}, {
+		.type = IMD_TYPE_CRC32,
+		.name = "crc32",
 	},
 };
 
@@ -257,6 +261,23 @@ char *imd_concat_strings(const struct imd_header *imd)
 }
 
 /**
+ * imd_uint32_flags - get uint32 flags
+ * @imd: The IMD entry
+ *
+ * This function returns the flags in @imd.
+ *
+ * Return: A pointer to the flags or NULL if the entry is not uint32.
+ */
+static uint32_t *imd_crc32_flags(const struct imd_header *imd) {
+	char *p = (char *)(imd + 1);
+
+	if (!imd_is_crc32(imd_read_type(imd)))
+		return NULL;
+
+	return (uint32_t *)(p + sizeof(uint32_t));
+}
+
+/**
  * imd_get_param - get a parameter
  * @imd: The IMD entry
  * @name: The name of the parameter.
@@ -287,6 +308,118 @@ const char *imd_get_param(const struct imd_header *imd, const char *name)
 	return NULL;
 }
 
+static int imd_calculate_crc32(void *input, const struct imd_header *imd_start,
+			       struct imd_header **imd_crc, uint32_t *crc,
+			       size_t size)
+{
+	const struct imd_header *imd;
+	int length;
+	int end_ofs = (char *)imd_start - (char *)input + sizeof(char) * 8;
+
+	/* search the checksum imd token */
+	imd_for_each(imd_start, imd) {
+		length = imd_read_length(imd);
+		length = ALIGN(length, 4);
+		length += sizeof(struct imd_header);
+
+		if (imd_read_type(imd) == IMD_TYPE_CRC32) {
+			*imd_crc = (struct imd_header *)imd;
+			debug("Found crc token at %d\n", end_ofs);
+			break;
+		}
+
+		end_ofs += length;
+	}
+
+	/*
+	 * Calculate checksum from start of input up to the checksum.
+	 * The checksum and the flags field in the imd_entry_crc32 entry are
+	 * modified after the checksum is calculated. Therefore skip them here
+	 * or the checksum will become invalid once it is written to the
+	 * checksum tag.
+	 */
+	length = sizeof(struct imd_header);
+	end_ofs += length;
+
+	*crc = crc32(*crc, input, end_ofs);
+	debug("Calculated checksum from %d to %d: 0x%08x\n", 0, end_ofs, *crc);
+
+	/* move past the checksum data and flags field */
+	end_ofs += sizeof(uint32_t) + sizeof(char);
+	input += end_ofs;
+
+	*crc = crc32(*crc, input, size - end_ofs);
+	debug("Calculated checksum from %d to %d: 0x%08x\n", end_ofs,
+	      end_ofs + (size - end_ofs), *crc);
+
+	return 0;
+}
+
+static int imd_write_crc32(void *buf, const struct imd_header *imd_start,
+			   const char *filename, size_t size)
+{
+	struct imd_header *imd_crc;
+	uint32_t crc = 0;
+
+	imd_calculate_crc32(buf, imd_start, &imd_crc, &crc, size);
+	debug("Calculated crc: 0x%08x\n", crc);
+
+	if (!imd_crc) {
+		debug("No tag of type 0x%08x found\n", IMD_TYPE_CRC32);
+
+		return -ENODATA;
+	} else {
+		uint32_t *p = (uint32_t *)(imd_crc + 1);
+
+		if (*p != crc) {
+			uint32_t *flags = imd_crc32_flags(imd_crc);
+			*flags |= IMD_CRC32_FLAG_TAG_VALID;
+			debug("Update crc token from 0x%08x to 0x%08x (flags 0x%08x)\n", *p, crc, *flags);
+			*p = crc;
+
+			write_file(filename, buf, size);
+		}
+	}
+
+	return 0;
+};
+
+int imd_verify_crc32(void *buf, size_t size)
+{
+	const struct imd_header *imd_start;
+	struct imd_header *imd_crc;
+	uint32_t crc = 0;
+
+	imd_start = imd_get(buf, size);
+	if (IS_ERR(imd_start))
+		return PTR_ERR(imd_start);
+
+	imd_calculate_crc32(buf, imd_start, &imd_crc, &crc, size);
+	debug("Calculated crc: 0x%08x\n", crc);
+
+	if (!imd_crc) {
+		debug("No tag of type 0x%08x found\n", IMD_TYPE_CRC32);
+
+		return -ENOENT;
+	} else {
+		uint32_t *p = (uint32_t *)(imd_crc + 1);
+		uint32_t *flags = imd_crc32_flags(imd_crc);
+
+		if (*p != crc && imd_crc32_is_valid(*flags)) {
+			eprintf("CRC: image corrupted. Found checksum 0x%08x instead of 0x%08x\n",
+			       *p, crc);
+			return -EILSEQ;
+		} else if (*p != crc && !imd_crc32_is_valid(*flags)) {
+			printf("CRC: is invalid, but the checksum tag is not enabled\n");
+			return -EINVAL;
+		} else {
+			printf("CRC: valid\n");
+		}
+	}
+
+	return 0;
+};
+
 int imd_command_verbose;
 
 int imd_command(int argc, char *argv[])
@@ -299,10 +432,12 @@ int imd_command(int argc, char *argv[])
 	const char *filename;
 	const char *variable_name = NULL;
 	char *str;
+	uint32_t checksum = 0;
+	uint32_t verify = 0;
 
 	imd_command_verbose = 0;
 
-	while ((opt = getopt(argc, argv, "vt:s:n:")) > 0) {
+	while ((opt = getopt(argc, argv, "vt:s:n:cV")) > 0) {
 		switch(opt) {
 		case 't':
 			type = imd_name_to_type(optarg);
@@ -320,6 +455,12 @@ int imd_command(int argc, char *argv[])
 		case 'n':
 			strno = simple_strtoul(optarg, NULL, 0);
 			break;
+		case 'c':
+			checksum = 1;
+			break;
+		case 'V':
+			verify = 1;
+			break;
 		default:
 			return -ENOSYS;
 		}
@@ -342,6 +483,11 @@ int imd_command(int argc, char *argv[])
 		goto out;
 	}
 
+	if (checksum)
+		imd_write_crc32(buf, imd_start, filename, size);
+	if (verify)
+		imd_verify_crc32(buf, size);
+
 	if (type == IMD_TYPE_INVALID) {
 		imd_for_each(imd_start, imd) {
 			uint32_t type = imd_read_type(imd);
@@ -350,6 +496,10 @@ int imd_command(int argc, char *argv[])
 				str = imd_concat_strings(imd);
 
 				printf("%s: %s\n", imd_type_to_name(type), str);
+			} else if (imd_is_crc32(type)) {
+				uint32_t *p = (uint32_t *)(imd + 1);
+
+				printf("%s: 0x%08x\n", imd_type_to_name(type), *p);
 			} else {
 				debug("Unknown tag 0x%08x\n", type);
 			}
diff --git a/common/optee.c b/common/optee.c
new file mode 100644
index 0000000000..d542dde118
--- /dev/null
+++ b/common/optee.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "optee: " fmt
+
+#include <tee/optee.h>
+#include <printk.h>
+#include <asm-generic/errno.h>
+
+int optee_verify_header(struct optee_header *hdr)
+{
+	if (hdr->magic != OPTEE_MAGIC) {
+		pr_err("Invalid header magic 0x%08x, expected 0x%08x\n",
+			   hdr->magic, OPTEE_MAGIC);
+		return -EINVAL;
+	}
+
+	if (hdr->arch != OPTEE_ARCH_ARM32 || hdr->init_load_addr_hi) {
+		pr_err("Only 32bit supported\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/common/state/state.h b/common/state/state.h
index 912d6d4848..1881d92ea7 100644
--- a/common/state/state.h
+++ b/common/state/state.h
@@ -159,7 +159,6 @@ struct state_variable {
  */
 struct state_uint32 {
 	struct state_variable var;
-	struct param_d *param;
 	uint32_t value;
 	uint32_t value_default;
 };
@@ -169,7 +168,6 @@ struct state_uint32 {
  */
 struct state_enum32 {
 	struct state_variable var;
-	struct param_d *param;
 	uint32_t value;
 	uint32_t value_default;
 	const char **names;
@@ -181,7 +179,6 @@ struct state_enum32 {
  */
 struct state_mac {
 	struct state_variable var;
-	struct param_d *param;
 	uint8_t value[6];
 	uint8_t value_default[6];
 };
@@ -191,7 +188,6 @@ struct state_mac {
  */
 struct state_string {
 	struct state_variable var;
-	struct param_d *param;
 	char *value;
 	const char *value_default;
 	char raw[];
diff --git a/common/state/state_variables.c b/common/state/state_variables.c
index 6a00c82203..66c66f38bd 100644
--- a/common/state/state_variables.c
+++ b/common/state/state_variables.c
@@ -116,7 +116,6 @@ static struct state_variable *state_uint8_create(struct state *state,
 		return ERR_CAST(param);
 	}
 
-	su32->param = param;
 	su32->var.type = vtype;
 	su32->var.size = sizeof(uint8_t);
 #ifdef __LITTLE_ENDIAN
@@ -146,7 +145,6 @@ static struct state_variable *state_uint32_create(struct state *state,
 		return ERR_CAST(param);
 	}
 
-	su32->param = param;
 	su32->var.type = vtype;
 	su32->var.size = sizeof(uint32_t);
 	su32->var.raw = &su32->value;
@@ -226,6 +224,7 @@ static struct state_variable *state_enum32_create(struct state *state,
 						  const struct variable_type *vtype)
 {
 	struct state_enum32 *enum32;
+	struct param_d *param;
 	int ret, i, num_names;
 
 	enum32 = xzalloc(sizeof(*enum32));
@@ -253,11 +252,11 @@ static struct state_variable *state_enum32_create(struct state *state,
 		enum32->names[i] = xstrdup(name);
 	}
 
-	enum32->param = dev_add_param_enum(&state->dev, name, state_set_dirty,
+	param = dev_add_param_enum(&state->dev, name, state_set_dirty,
 					   NULL, &enum32->value, enum32->names,
 					   num_names, &enum32->var);
-	if (IS_ERR(enum32->param)) {
-		ret = PTR_ERR(enum32->param);
+	if (IS_ERR(param)) {
+		ret = PTR_ERR(param);
 		goto out;
 	}
 
@@ -310,6 +309,7 @@ static struct state_variable *state_mac_create(struct state *state,
 					       const struct variable_type *vtype)
 {
 	struct state_mac *mac;
+	struct param_d *param;
 	int ret;
 
 	mac = xzalloc(sizeof(*mac));
@@ -319,10 +319,10 @@ static struct state_variable *state_mac_create(struct state *state,
 	mac->var.raw = mac->value;
 	mac->var.state = state;
 
-	mac->param = dev_add_param_mac(&state->dev, name, state_set_dirty,
+	param = dev_add_param_mac(&state->dev, name, state_set_dirty,
 				       NULL, mac->value, &mac->var);
-	if (IS_ERR(mac->param)) {
-		ret = PTR_ERR(mac->param);
+	if (IS_ERR(param)) {
+		ret = PTR_ERR(param);
 		goto out;
 	}
 
@@ -413,6 +413,7 @@ static struct state_variable *state_string_create(struct state *state,
 {
 	struct state_string *string;
 	uint32_t start_size[2];
+	struct param_d *param;
 	int ret;
 
 	ret = of_property_read_u32_array(node, "reg", start_size,
@@ -432,11 +433,11 @@ static struct state_variable *state_string_create(struct state *state,
 	string->var.raw = &string->raw;
 	string->var.state = state;
 
-	string->param = dev_add_param_string(&state->dev, name,
+	param = dev_add_param_string(&state->dev, name,
 					     state_string_set, state_string_get,
 					     &string->value, &string->var);
-	if (IS_ERR(string->param)) {
-		ret = PTR_ERR(string->param);
+	if (IS_ERR(param)) {
+		ret = PTR_ERR(param);
 		goto out;
 	}
 
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index eec2a2d8a2..456750e7d5 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -36,6 +36,7 @@
 #include <linux/err.h>
 #include <complete.h>
 #include <pinctrl.h>
+#include <linux/clk/clk-conf.h>
 
 LIST_HEAD(device_list);
 EXPORT_SYMBOL(device_list);
@@ -86,6 +87,7 @@ int device_probe(struct device_d *dev)
 	int ret;
 
 	pinctrl_select_state_default(dev);
+	of_clk_set_defaults(dev->device_node, false);
 
 	list_add(&dev->active, &active);
 
@@ -308,6 +310,9 @@ int register_driver(struct driver_d *drv)
 {
 	struct device_d *dev = NULL;
 
+	if (!drv->name)
+		return -EINVAL;
+
 	debug("register_driver: %s\n", drv->name);
 
 	BUG_ON(!drv->bus);
diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile
index 4dc3d8c510..ab2387037d 100644
--- a/drivers/base/regmap/Makefile
+++ b/drivers/base/regmap/Makefile
@@ -1 +1,2 @@
-obj-y	+= regmap.o
\ No newline at end of file
+obj-y	+= regmap.o
+obj-y	+= regmap-mmio.o
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h
index 52df5290a1..5b19459828 100644
--- a/drivers/base/regmap/internal.h
+++ b/drivers/base/regmap/internal.h
@@ -1,5 +1,10 @@
+#ifndef REGMAP_INTERNAL_H_
+#define REGMAP_INTERNAL_H_
 
 #include <linux/list.h>
+#include <driver.h>
+
+struct regmap_bus;
 
 struct regmap {
 	struct device_d *dev;
@@ -15,4 +20,6 @@ struct regmap {
 	unsigned int max_register;
 
 	struct cdev cdev;
-};
\ No newline at end of file
+};
+
+#endif
diff --git a/drivers/base/regmap/regmap-mmio.c b/drivers/base/regmap/regmap-mmio.c
new file mode 100644
index 0000000000..f8d2cda843
--- /dev/null
+++ b/drivers/base/regmap/regmap-mmio.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Register map access API - MMIO support
+//
+// Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <io.h>
+#include <regmap.h>
+
+#include "internal.h"
+
+struct regmap_mmio_context {
+	void __iomem *regs;
+	unsigned val_bytes;
+
+	struct clk *clk;
+
+	void (*reg_write)(struct regmap_mmio_context *ctx,
+			  unsigned int reg, unsigned int val);
+	unsigned int (*reg_read)(struct regmap_mmio_context *ctx,
+			         unsigned int reg);
+};
+
+static int regmap_mmio_regbits_check(size_t reg_bits)
+{
+	switch (reg_bits) {
+	case 8:
+	case 16:
+	case 32:
+#ifdef CONFIG_64BIT
+	case 64:
+#endif
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int regmap_mmio_get_min_stride(size_t val_bits)
+{
+	int min_stride;
+
+	switch (val_bits) {
+	case 8:
+		/* The core treats 0 as 1 */
+		min_stride = 0;
+		return 0;
+	case 16:
+		min_stride = 2;
+		break;
+	case 32:
+		min_stride = 4;
+		break;
+#ifdef CONFIG_64BIT
+	case 64:
+		min_stride = 8;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return min_stride;
+}
+
+static void regmap_mmio_write8(struct regmap_mmio_context *ctx,
+				unsigned int reg,
+				unsigned int val)
+{
+	writeb(val, ctx->regs + reg);
+}
+
+static void regmap_mmio_write16le(struct regmap_mmio_context *ctx,
+				  unsigned int reg,
+				  unsigned int val)
+{
+	writew(val, ctx->regs + reg);
+}
+
+static void regmap_mmio_write32le(struct regmap_mmio_context *ctx,
+				  unsigned int reg,
+				  unsigned int val)
+{
+	writel(val, ctx->regs + reg);
+}
+
+#ifdef CONFIG_64BIT
+static void regmap_mmio_write64le(struct regmap_mmio_context *ctx,
+				  unsigned int reg,
+				  unsigned int val)
+{
+	writeq(val, ctx->regs + reg);
+}
+#endif
+
+static int regmap_mmio_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct regmap_mmio_context *ctx = context;
+	int ret;
+
+	ret = clk_enable(ctx->clk);
+	if (ret < 0)
+		return ret;
+
+	ctx->reg_write(ctx, reg, val);
+
+	clk_disable(ctx->clk);
+
+	return 0;
+}
+
+static unsigned int regmap_mmio_read8(struct regmap_mmio_context *ctx,
+				      unsigned int reg)
+{
+	return readb(ctx->regs + reg);
+}
+
+static unsigned int regmap_mmio_read16le(struct regmap_mmio_context *ctx,
+				         unsigned int reg)
+{
+	return readw(ctx->regs + reg);
+}
+
+static unsigned int regmap_mmio_read32le(struct regmap_mmio_context *ctx,
+				         unsigned int reg)
+{
+	return readl(ctx->regs + reg);
+}
+
+#ifdef CONFIG_64BIT
+static unsigned int regmap_mmio_read64le(struct regmap_mmio_context *ctx,
+				         unsigned int reg)
+{
+	return readq(ctx->regs + reg);
+}
+#endif
+
+static int regmap_mmio_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct regmap_mmio_context *ctx = context;
+	int ret;
+
+	ret = clk_enable(ctx->clk);
+	if (ret < 0)
+		return ret;
+
+	*val = ctx->reg_read(ctx, reg);
+
+	clk_disable(ctx->clk);
+
+	return 0;
+}
+
+static const struct regmap_bus regmap_mmio = {
+	.reg_write = regmap_mmio_write,
+	.reg_read = regmap_mmio_read,
+};
+
+static struct regmap_mmio_context *regmap_mmio_gen_context(void __iomem *regs,
+					const struct regmap_config *config)
+{
+	struct regmap_mmio_context *ctx;
+	int min_stride;
+	int ret;
+
+	ret = regmap_mmio_regbits_check(config->reg_bits);
+	if (ret)
+		return ERR_PTR(ret);
+
+	if (config->pad_bits)
+		return ERR_PTR(-EINVAL);
+
+	min_stride = regmap_mmio_get_min_stride(config->val_bits);
+	if (min_stride < 0)
+		return ERR_PTR(min_stride);
+
+	if (config->reg_stride < min_stride)
+		return ERR_PTR(-EINVAL);
+
+	ctx = xzalloc(sizeof(*ctx));
+
+	ctx->regs = regs;
+	ctx->val_bytes = config->val_bits / 8;
+
+	switch (config->val_bits) {
+	case 8:
+		ctx->reg_read = regmap_mmio_read8;
+		ctx->reg_write = regmap_mmio_write8;
+		break;
+	case 16:
+		ctx->reg_read = regmap_mmio_read16le;
+		ctx->reg_write = regmap_mmio_write16le;
+		break;
+	case 32:
+		ctx->reg_read = regmap_mmio_read32le;
+		ctx->reg_write = regmap_mmio_write32le;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err_free;
+	}
+
+	return ctx;
+
+err_free:
+	kfree(ctx);
+
+	return ERR_PTR(ret);
+}
+
+struct regmap *regmap_init_mmio_clk(struct device_d *dev,
+				    const char *clk_id,
+				    void __iomem *regs,
+				    const struct regmap_config *config)
+{
+	struct regmap_mmio_context *ctx;
+
+	ctx = regmap_mmio_gen_context(regs, config);
+	if (IS_ERR(ctx))
+		return ERR_CAST(ctx);
+
+	if (clk_id) {
+		ctx->clk = clk_get(dev, clk_id);
+		if (IS_ERR(ctx->clk)) {
+			kfree(ctx);
+			return ERR_CAST(ctx->clk);
+		}
+	}
+
+	return regmap_init(dev, &regmap_mmio, ctx, config);
+}
+
+struct regmap *of_regmap_init_mmio_clk(struct device_node *np,
+				       const char *clk_id,
+				       void __iomem *regs,
+				       const struct regmap_config *config)
+{
+	struct regmap_mmio_context *ctx;
+
+	ctx = regmap_mmio_gen_context(regs, config);
+	if (IS_ERR(ctx))
+		return ERR_CAST(ctx);
+
+	if (clk_id) {
+		ctx->clk = of_clk_get_by_name(np, clk_id);
+		if (IS_ERR(ctx->clk)) {
+			kfree(ctx);
+			return ERR_CAST(ctx->clk);
+		}
+	}
+
+	return regmap_init(NULL, &regmap_mmio, ctx, config);
+}
+
+int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk)
+{
+	struct regmap_mmio_context *ctx = map->bus_context;
+
+	ctx->clk = clk;
+
+	return 0;
+}
+
+void regmap_mmio_detach_clk(struct regmap *map)
+{
+	struct regmap_mmio_context *ctx = map->bus_context;
+
+	ctx->clk = NULL;
+}
diff --git a/drivers/clk/imx/clk-imx1.c b/drivers/clk/imx/clk-imx1.c
index 5f600a9da3..9a817c36c0 100644
--- a/drivers/clk/imx/clk-imx1.c
+++ b/drivers/clk/imx/clk-imx1.c
@@ -53,7 +53,7 @@ static const char *clko_sel_clks[] = {
 	"fclk",
 };
 
-int __init mx1_clocks_init(void __iomem *regs, unsigned long fref)
+static int __init mx1_clocks_init(void __iomem *regs, unsigned long fref)
 {
 	clks[dummy] = clk_fixed("dummy", 0);
 	clks[clk32] = clk_fixed("clk32", fref);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 43c5bfc973..39ddd159f9 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -70,7 +70,7 @@ config CLOCKSOURCE_ROCKCHIP
 config CLOCKSOURCE_ATMEL_PIT
        bool
 
-config CLOCKSOURCE_ARMV8_TIMER
+config CLOCKSOURCE_ARM_ARCHITECTED_TIMER
 	bool
 	default y
 	depends on ARM && (CPU_64v8 || CPU_V7)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 8dbf91f323..cba6344bbb 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -11,9 +11,9 @@ obj-$(CONFIG_CLOCKSOURCE_ORION)   += orion.o
 obj-$(CONFIG_CLOCKSOURCE_UEMD)    += uemd.o
 obj-$(CONFIG_CLOCKSOURCE_ROCKCHIP)+= rk_timer.o
 obj-$(CONFIG_CLOCKSOURCE_ATMEL_PIT) += timer-atmel-pit.o
-obj-$(CONFIG_CLOCKSOURCE_ARMV8_TIMER) += armv8-timer.o
+obj-$(CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER) += arm_architected_timer.o
 ifneq ($(CONFIG_CPU_V8),y)
-CFLAGS_armv8-timer.o := -march=armv7-a
+CFLAGS_arm_architected_timer.o := -march=armv7-a
 endif
 obj-$(CONFIG_CLOCKSOURCE_ARM_GLOBAL_TIMER) += arm_global_timer.o
 obj-$(CONFIG_CLOCKSOURCE_IMX_GPT) += timer-imx-gpt.o
diff --git a/drivers/clocksource/armv8-timer.c b/drivers/clocksource/arm_architected_timer.c
index 3095f8cfc4..3ca7dfd17d 100644
--- a/drivers/clocksource/armv8-timer.c
+++ b/drivers/clocksource/arm_architected_timer.c
@@ -20,34 +20,33 @@
 #include <io.h>
 #include <asm/system.h>
 
-static uint64_t armv8_clocksource_read(void)
+static uint64_t arm_arch_clocksource_read(void)
 {
 	return get_cntpct();
 }
 
 static struct clocksource cs = {
-	.read	= armv8_clocksource_read,
+	.read	= arm_arch_clocksource_read,
 	.mask	= CLOCKSOURCE_MASK(64),
 	.shift	= 0,
 };
 
-static int armv8_timer_probe(struct device_d *dev)
+static int arm_arch_timer_probe(struct device_d *dev)
 {
 	cs.mult = clocksource_hz2mult(get_cntfrq(), cs.shift);
 
 	return init_clock(&cs);
 }
 
-static struct of_device_id armv8_timer_dt_ids[] = {
+static struct of_device_id arm_arch_timer_dt_ids[] = {
 	{ .compatible = "arm,armv7-timer", },
 	{ .compatible = "arm,armv8-timer", },
 	{ }
 };
 
-static struct driver_d armv8_timer_driver = {
-	.name = "armv8-timer",
-	.probe = armv8_timer_probe,
-	.of_compatible = DRV_OF_COMPAT(armv8_timer_dt_ids),
+static struct driver_d arm_arch_timer_driver = {
+	.name = "arm-architected-timer",
+	.probe = arm_arch_timer_probe,
+	.of_compatible = DRV_OF_COMPAT(arm_arch_timer_dt_ids),
 };
-postcore_platform_driver(armv8_timer_driver);
-
+postcore_platform_driver(arm_arch_timer_driver);
diff --git a/drivers/eeprom/at25.c b/drivers/eeprom/at25.c
index 1c9ef12321..56168c216d 100644
--- a/drivers/eeprom/at25.c
+++ b/drivers/eeprom/at25.c
@@ -259,7 +259,7 @@ static int at25_np_to_chip(struct device_d *dev,
 
 	if (of_property_read_u32(np, "pagesize", &val) == 0 ||
 	    of_property_read_u32(np, "at25,page-size", &val) == 0) {
-		chip->page_size = (u16)val;
+		chip->page_size = val;
 	} else {
 		dev_err(dev, "Error: missing \"pagesize\" property\n");
 		return -ENODEV;
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9764ddf0f0..27674af54c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -48,6 +48,11 @@ static struct gpio_info *gpio_to_desc(unsigned gpio)
 	return NULL;
 }
 
+static unsigned gpioinfo_chip_offset(struct gpio_info *gi)
+{
+	return (gi - gpio_desc) - gi->chip->base;
+}
+
 static int gpio_adjust_value(struct gpio_info *gi,
 			     int value)
 {
@@ -57,16 +62,10 @@ static int gpio_adjust_value(struct gpio_info *gi,
 	return !!value ^ gi->active_low;
 }
 
-int gpio_request(unsigned gpio, const char *label)
+static int gpioinfo_request(struct gpio_info *gi, const char *label)
 {
-	struct gpio_info *gi = gpio_to_desc(gpio);
 	int ret;
 
-	if (!gi) {
-		ret = -ENODEV;
-		goto done;
-	}
-
 	if (gi->requested) {
 		ret = -EBUSY;
 		goto done;
@@ -75,7 +74,8 @@ int gpio_request(unsigned gpio, const char *label)
 	ret = 0;
 
 	if (gi->chip->ops->request) {
-		ret = gi->chip->ops->request(gi->chip, gpio - gi->chip->base);
+		ret = gi->chip->ops->request(gi->chip,
+					     gpioinfo_chip_offset(gi));
 		if (ret)
 			goto done;
 	}
@@ -86,8 +86,8 @@ int gpio_request(unsigned gpio, const char *label)
 
 done:
 	if (ret)
-		pr_err("_gpio_request: gpio-%d (%s) status %d\n",
-			 gpio, label ? : "?", ret);
+		pr_err("_gpio_request: gpio-%td (%s) status %d\n",
+		       gi - gpio_desc, label ? : "?", ret);
 
 	return ret;
 }
@@ -126,18 +126,26 @@ int gpio_find_by_name(const char *name)
 	return -ENOENT;
 }
 
-void gpio_free(unsigned gpio)
+int gpio_request(unsigned gpio, const char *label)
 {
 	struct gpio_info *gi = gpio_to_desc(gpio);
 
-	if (!gi)
-		return;
+	if (!gi) {
+		pr_err("_gpio_request: gpio-%d (%s) status %d\n",
+			 gpio, label ? : "?", -ENODEV);
+		return -ENODEV;
+	}
+
+	return gpioinfo_request(gi, label);
+}
 
+static void gpioinfo_free(struct gpio_info *gi)
+{
 	if (!gi->requested)
 		return;
 
 	if (gi->chip->ops->free)
-		gi->chip->ops->free(gi->chip, gpio - gi->chip->base);
+		gi->chip->ops->free(gi->chip, gpioinfo_chip_offset(gi));
 
 	gi->requested = false;
 	gi->active_low = false;
@@ -145,81 +153,21 @@ void gpio_free(unsigned gpio)
 	gi->label = NULL;
 }
 
-/**
- * gpio_request_one - request a single GPIO with initial configuration
- * @gpio:	the GPIO number
- * @flags:	GPIO configuration as specified by GPIOF_*
- * @label:	a literal description string of this GPIO
- */
-int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+void gpio_free(unsigned gpio)
 {
-	int err;
 	struct gpio_info *gi = gpio_to_desc(gpio);
 
-	/*
-	 * Not all of the flags below are mulit-bit, but, for the sake
-	 * of consistency, the code is written as if all of them were.
-	 */
-	const bool active_low  = (flags & GPIOF_ACTIVE_LOW) == GPIOF_ACTIVE_LOW;
-	const bool dir_in      = (flags & GPIOF_DIR_IN) == GPIOF_DIR_IN;
-	const bool logical     = (flags & GPIOF_LOGICAL) == GPIOF_LOGICAL;
-	const bool init_active = (flags & GPIOF_INIT_ACTIVE) == GPIOF_INIT_ACTIVE;
-	const bool init_high   = (flags & GPIOF_INIT_HIGH) == GPIOF_INIT_HIGH;
-
-	err = gpio_request(gpio, label);
-	if (err)
-		return err;
-
-	gi->active_low = active_low;
-
-	if (dir_in)
-		err = gpio_direction_input(gpio);
-	else if (logical)
-		err = gpio_direction_active(gpio, init_active);
-	else
-		err = gpio_direction_output(gpio, init_high);
-
-	if (err)
-		gpio_free(gpio);
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(gpio_request_one);
-
-/**
- * gpio_request_array - request multiple GPIOs in a single call
- * @array:	array of the 'struct gpio'
- * @num:	how many GPIOs in the array
- */
-int gpio_request_array(const struct gpio *array, size_t num)
-{
-	int i, err;
-
-	for (i = 0; i < num; i++, array++) {
-		err = gpio_request_one(array->gpio, array->flags, array->label);
-		if (err)
-			goto err_free;
-	}
-	return 0;
+	if (!gi)
+		return;
 
-err_free:
-	while (i--)
-		gpio_free((--array)->gpio);
-	return err;
+	gpioinfo_free(gi);
 }
-EXPORT_SYMBOL_GPL(gpio_request_array);
 
-/**
- * gpio_free_array - release multiple GPIOs in a single call
- * @array:	array of the 'struct gpio'
- * @num:	how many GPIOs in the array
- */
-void gpio_free_array(const struct gpio *array, size_t num)
+static void gpioinfo_set_value(struct gpio_info *gi, int value)
 {
-	while (num--)
-		gpio_free((array++)->gpio);
+	if (gi->chip->ops->set)
+		gi->chip->ops->set(gi->chip, gpioinfo_chip_offset(gi), value);
 }
-EXPORT_SYMBOL_GPL(gpio_free_array);
 
 void gpio_set_value(unsigned gpio, int value)
 {
@@ -231,8 +179,7 @@ void gpio_set_value(unsigned gpio, int value)
 	if (gpio_ensure_requested(gi, gpio))
 		return;
 
-	if (gi->chip->ops->set)
-		gi->chip->ops->set(gi->chip, gpio - gi->chip->base, value);
+	gpioinfo_set_value(gi, value);
 }
 EXPORT_SYMBOL(gpio_set_value);
 
@@ -247,6 +194,14 @@ void gpio_set_active(unsigned gpio, bool value)
 }
 EXPORT_SYMBOL(gpio_set_active);
 
+static int gpioinfo_get_value(struct gpio_info *gi)
+{
+	if (!gi->chip->ops->get)
+		return -ENOSYS;
+
+	return gi->chip->ops->get(gi->chip, gpioinfo_chip_offset(gi));
+}
+
 int gpio_get_value(unsigned gpio)
 {
 	struct gpio_info *gi = gpio_to_desc(gpio);
@@ -259,9 +214,7 @@ int gpio_get_value(unsigned gpio)
 	if (ret)
 		return ret;
 
-	if (!gi->chip->ops->get)
-		return -ENOSYS;
-	return gi->chip->ops->get(gi->chip, gpio - gi->chip->base);
+	return gpioinfo_get_value(gi);
 }
 EXPORT_SYMBOL(gpio_get_value);
 
@@ -276,6 +229,15 @@ int gpio_is_active(unsigned gpio)
 }
 EXPORT_SYMBOL(gpio_is_active);
 
+static int gpioinfo_direction_output(struct gpio_info *gi, int value)
+{
+	if (!gi->chip->ops->direction_output)
+		return -ENOSYS;
+
+	return gi->chip->ops->direction_output(gi->chip,
+					       gpioinfo_chip_offset(gi), value);
+}
+
 int gpio_direction_output(unsigned gpio, int value)
 {
 	struct gpio_info *gi = gpio_to_desc(gpio);
@@ -288,13 +250,15 @@ int gpio_direction_output(unsigned gpio, int value)
 	if (ret)
 		return ret;
 
-	if (!gi->chip->ops->direction_output)
-		return -ENOSYS;
-	return gi->chip->ops->direction_output(gi->chip, gpio - gi->chip->base,
-					       value);
+	return gpioinfo_direction_output(gi, value);
 }
 EXPORT_SYMBOL(gpio_direction_output);
 
+static int gpioinfo_direction_active(struct gpio_info *gi, bool value)
+{
+	return gpioinfo_direction_output(gi, gpio_adjust_value(gi, value));
+}
+
 int gpio_direction_active(unsigned gpio, bool value)
 {
 	struct gpio_info *gi = gpio_to_desc(gpio);
@@ -302,10 +266,19 @@ int gpio_direction_active(unsigned gpio, bool value)
 	if (!gi)
 		return -ENODEV;
 
-	return gpio_direction_output(gpio, gpio_adjust_value(gi, value));
+	return gpioinfo_direction_active(gi, value);
 }
 EXPORT_SYMBOL(gpio_direction_active);
 
+static int gpioinfo_direction_input(struct gpio_info *gi)
+{
+	if (!gi->chip->ops->direction_input)
+		return -ENOSYS;
+
+	return gi->chip->ops->direction_input(gi->chip,
+					      gpioinfo_chip_offset(gi));
+}
+
 int gpio_direction_input(unsigned gpio)
 {
 	struct gpio_info *gi = gpio_to_desc(gpio);
@@ -318,12 +291,96 @@ int gpio_direction_input(unsigned gpio)
 	if (ret)
 		return ret;
 
-	if (!gi->chip->ops->direction_input)
-		return -ENOSYS;
-	return gi->chip->ops->direction_input(gi->chip, gpio - gi->chip->base);
+	return gpioinfo_direction_input(gi);
 }
 EXPORT_SYMBOL(gpio_direction_input);
 
+static int gpioinfo_request_one(struct gpio_info *gi, unsigned long flags,
+				const char *label)
+{
+	int err;
+
+	/*
+	 * Not all of the flags below are mulit-bit, but, for the sake
+	 * of consistency, the code is written as if all of them were.
+	 */
+	const bool active_low  = (flags & GPIOF_ACTIVE_LOW) == GPIOF_ACTIVE_LOW;
+	const bool dir_in      = (flags & GPIOF_DIR_IN) == GPIOF_DIR_IN;
+	const bool logical     = (flags & GPIOF_LOGICAL) == GPIOF_LOGICAL;
+	const bool init_active = (flags & GPIOF_INIT_ACTIVE) == GPIOF_INIT_ACTIVE;
+	const bool init_high   = (flags & GPIOF_INIT_HIGH) == GPIOF_INIT_HIGH;
+
+	err = gpioinfo_request(gi, label);
+	if (err)
+		return err;
+
+	gi->active_low = active_low;
+
+	if (dir_in)
+		err = gpioinfo_direction_input(gi);
+	else if (logical)
+		err = gpioinfo_direction_active(gi, init_active);
+	else
+		err = gpioinfo_direction_output(gi, init_high);
+
+	if (err)
+		gpioinfo_free(gi);
+
+	return err;
+}
+
+/**
+ * gpio_request_one - request a single GPIO with initial configuration
+ * @gpio:	the GPIO number
+ * @flags:	GPIO configuration as specified by GPIOF_*
+ * @label:	a literal description string of this GPIO
+ */
+int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+{
+	struct gpio_info *gi = gpio_to_desc(gpio);
+
+	if (!gi)
+		return -ENODEV;
+
+	return gpioinfo_request_one(gi, flags, label);
+}
+EXPORT_SYMBOL_GPL(gpio_request_one);
+
+/**
+ * gpio_request_array - request multiple GPIOs in a single call
+ * @array:	array of the 'struct gpio'
+ * @num:	how many GPIOs in the array
+ */
+int gpio_request_array(const struct gpio *array, size_t num)
+{
+	int i, err;
+
+	for (i = 0; i < num; i++, array++) {
+		err = gpio_request_one(array->gpio, array->flags, array->label);
+		if (err)
+			goto err_free;
+	}
+	return 0;
+
+err_free:
+	while (i--)
+		gpio_free((--array)->gpio);
+	return err;
+}
+EXPORT_SYMBOL_GPL(gpio_request_array);
+
+/**
+ * gpio_free_array - release multiple GPIOs in a single call
+ * @array:	array of the 'struct gpio'
+ * @num:	how many GPIOs in the array
+ */
+void gpio_free_array(const struct gpio *array, size_t num)
+{
+	while (num--)
+		gpio_free((array++)->gpio);
+}
+EXPORT_SYMBOL_GPL(gpio_free_array);
+
 static int gpiochip_find_base(int start, int ngpio)
 {
 	int i;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index d56c0def65..94c982d5c2 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -632,7 +632,7 @@ static int tegra_i2c_probe(struct device_d *dev)
 
 	i2c_dev->rst = reset_control_get(dev, "i2c");
 	if (IS_ERR(i2c_dev->rst)) {
-		dev_err(dev, "missing controller reset");
+		dev_err(dev, "invalid controller reset");
 		return PTR_ERR(i2c_dev->rst);
 	}
 
diff --git a/drivers/led/led-pwm.c b/drivers/led/led-pwm.c
index 16d22b5569..8a358dde88 100644
--- a/drivers/led/led-pwm.c
+++ b/drivers/led/led-pwm.c
@@ -41,6 +41,9 @@ static void led_pwm_set(struct led *led, unsigned int brightness)
         duty *= brightness;
         do_div(duty, max);
 
+	if (pwmled->active_low)
+		duty = pwmled->period - duty;
+
 	pwm_config(pwmled->pwm, duty, pwmled->period);
 }
 
@@ -54,16 +57,19 @@ static int led_pwm_of_probe(struct device_d *dev)
 		struct pwm_device *pwm;
 
 		pwm = of_pwm_request(child, NULL);
-		if (pwm < 0)
+		if (IS_ERR(pwm))
 			continue;
 
 		pwmled = xzalloc(sizeof(*pwmled));
 		pwmled->led.name = xstrdup(child->name);
 		pwmled->pwm = pwm;
 
-		of_property_read_u32(child, "max-brightness", &pwmled->led.max_value);
+		ret = of_property_read_u32(child, "max-brightness", &pwmled->led.max_value);
+		if (ret)
+			return ret;
 
 		pwmled->period = pwm_get_period(pwmled->pwm);
+		pwmled->active_low = of_property_read_bool(child, "active-low");
 
 		pwmled->led.set = led_pwm_set;
 
diff --git a/drivers/mci/imx-esdhc-common.c b/drivers/mci/imx-esdhc-common.c
index d0bef9470c..c9d589468f 100644
--- a/drivers/mci/imx-esdhc-common.c
+++ b/drivers/mci/imx-esdhc-common.c
@@ -214,7 +214,7 @@ int __esdhc_send_cmd(struct fsl_esdhc_host *host, struct mci_cmd *cmd,
 			 SDHCI_INT_CMD_COMPLETE, SDHCI_INT_CMD_COMPLETE,
 			 100 * MSECOND);
 	if (ret) {
-		dev_err(host->dev, "timeout 1\n");
+		dev_dbg(host->dev, "timeout 1\n");
 		return -ETIMEDOUT;
 	}
 
diff --git a/drivers/mci/mci-core.c b/drivers/mci/mci-core.c
index dd163c3d16..34aaee54f9 100644
--- a/drivers/mci/mci-core.c
+++ b/drivers/mci/mci-core.c
@@ -668,10 +668,11 @@ retry_scr:
 static void mci_set_ios(struct mci *mci)
 {
 	struct mci_host *host = mci->host;
-	struct mci_ios ios;
-
-	ios.bus_width = host->bus_width;
-	ios.clock = host->clock;
+	struct mci_ios ios = {
+		.bus_width = host->bus_width,
+		.clock = host->clock,
+		.timing = host->timing,
+	};
 
 	host->set_ios(host, &ios);
 }
@@ -996,6 +997,9 @@ static int mci_startup_sd(struct mci *mci)
 		mci_set_bus_width(mci, MMC_BUS_WIDTH_4);
 	}
 
+	if (mci->tran_speed > 25000000)
+		mci->host->timing = MMC_TIMING_SD_HS;
+
 	mci_set_clock(mci, mci->tran_speed);
 
 	return 0;
@@ -1021,6 +1025,8 @@ static int mci_startup_mmc(struct mci *mci)
 			mci->tran_speed = 52000000;
 		else
 			mci->tran_speed = 26000000;
+
+		host->timing = MMC_TIMING_MMC_HS;
 	}
 
 	mci_set_clock(mci, mci->tran_speed);
@@ -1473,6 +1479,20 @@ static unsigned extract_mtd_year(struct mci *mci)
 	return year;
 }
 
+static const char *mci_timing_tostr(unsigned timing)
+{
+	switch (timing) {
+	case MMC_TIMING_LEGACY:
+		return "legacy";
+	case MMC_TIMING_MMC_HS:
+		return "MMC HS";
+	case MMC_TIMING_SD_HS:
+		return "SD HS";
+	default:
+		return "unknown"; /* shouldn't happen */
+	}
+}
+
 static void mci_print_caps(unsigned caps)
 {
 	printf("  capabilities: %s%s%s%s%s\n",
@@ -1509,6 +1529,7 @@ static void mci_info(struct device_d *dev)
 		bw = 1;
 
 	printf("  current buswidth: %d\n", bw);
+	printf("  current timing: %s\n", mci_timing_tostr(host->timing));
 	mci_print_caps(host->host_caps);
 
 	printf("Card information:\n");
@@ -1801,6 +1822,7 @@ static int mci_detect(struct device_d *dev)
 int mci_register(struct mci_host *host)
 {
 	struct mci *mci;
+	struct param_d *param_probe;
 	int ret;
 
 	mci = xzalloc(sizeof(*mci));
@@ -1832,11 +1854,11 @@ int mci_register(struct mci_host *host)
 
 	dev_info(mci->host->hw_dev, "registered as %s\n", dev_name(&mci->dev));
 
-	mci->param_probe = dev_add_param_bool(&mci->dev, "probe",
+	param_probe = dev_add_param_bool(&mci->dev, "probe",
 			mci_set_probe, NULL, &mci->probe, mci);
 
-	if (IS_ERR(mci->param_probe) && PTR_ERR(mci->param_probe) != -ENOSYS) {
-		ret = PTR_ERR(mci->param_probe);
+	if (IS_ERR(param_probe) && PTR_ERR(param_probe) != -ENOSYS) {
+		ret = PTR_ERR(param_probe);
 		dev_dbg(&mci->dev, "Failed to add 'probe' parameter to the MCI device\n");
 		goto err_unregister;
 	}
diff --git a/drivers/mci/stm32_sdmmc2.c b/drivers/mci/stm32_sdmmc2.c
index 44f7e62399..0c26869b03 100644
--- a/drivers/mci/stm32_sdmmc2.c
+++ b/drivers/mci/stm32_sdmmc2.c
@@ -622,7 +622,7 @@ static int stm32_sdmmc2_probe(struct amba_device *adev,
 
 	priv->reset_ctl = reset_control_get(dev, NULL);
 	if (IS_ERR(priv->reset_ctl))
-		priv->reset_ctl = NULL;
+		return PTR_ERR(priv->reset_ctl);
 
 	mci->f_min = 400000;
 	/* f_max is taken from kernel v5.3 variant_stm32_sdmmc */
@@ -631,6 +631,11 @@ static int stm32_sdmmc2_probe(struct amba_device *adev,
 
 	mci_of_parse(&priv->mci);
 
+	if (mci->f_max >= 26000000)
+		mci->host_caps |= MMC_CAP_MMC_HIGHSPEED;
+	if (mci->f_max >= 52000000)
+		mci->host_caps |= MMC_CAP_MMC_HIGHSPEED_52MHZ;
+
 	return mci_register(&priv->mci);
 
 priv_free:
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 8099419378..f1e6559d71 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -19,6 +19,7 @@
 #include <xfuncs.h>
 #include <of_address.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <mfd/syscon.h>
 
@@ -31,34 +32,13 @@ struct syscon {
 	struct regmap *regmap;
 };
 
-static int syscon_reg_write(void *context, unsigned int reg,
-			    unsigned int val)
-{
-	struct syscon *syscon = context;
-	writel(val, syscon->base + reg);
-	return 0;
-}
-
-static int syscon_reg_read(void *context, unsigned int reg,
-			   unsigned int *val)
-{
-	struct syscon *syscon = context;
-	*val = readl(syscon->base + reg);
-	return 0;
-}
-
-static const struct regmap_bus syscon_regmap_bus = {
-	.reg_write = syscon_reg_write,
-	.reg_read  = syscon_reg_read,
-};
-
 static const struct regmap_config syscon_regmap_config = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
 };
 
-static struct syscon *of_syscon_register(struct device_node *np)
+static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 {
 	int ret;
 	struct syscon *syscon;
@@ -79,10 +59,23 @@ static struct syscon *of_syscon_register(struct device_node *np)
 
 	list_add_tail(&syscon->list, &syscon_list);
 
-	syscon->regmap = regmap_init(NULL,
-				     &syscon_regmap_bus,
-				     syscon,
-				     &syscon_regmap_config);
+	syscon->regmap = of_regmap_init_mmio_clk(np, NULL, syscon->base,
+					     &syscon_regmap_config);
+
+	if (check_clk) {
+		struct clk *clk = of_clk_get(np, 0);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			/* clock is optional */
+			if (ret != -ENOENT)
+				goto err_map;
+		} else {
+			ret = regmap_mmio_attach_clk(syscon->regmap, clk);
+			if (ret)
+				goto err_map;
+		}
+	}
+
 	return syscon;
 
 err_map:
@@ -101,7 +94,7 @@ static struct syscon *node_to_syscon(struct device_node *np)
 		}
 
 	if (!syscon)
-		syscon = of_syscon_register(np);
+		syscon = of_syscon_register(np, true);
 
 	if (IS_ERR(syscon))
 		return ERR_CAST(syscon);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index fadfe1f99b..3c5da4a40c 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -71,12 +71,6 @@ config NAND_IMX
 	prompt "i.MX NAND driver"
 	depends on ARCH_IMX
 
-config NAND_IMX_BBM
-	bool
-	depends on NAND_BBT
-	depends on NAND_IMX
-	prompt "i.MX NAND flash bbt creation command"
-
 config NAND_MXS
 	bool
 	select NAND_BBT
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index a4066ba778..274bc29ee7 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_NAND_BBT)			+= nand_bbt.o
 
 obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
 obj-$(CONFIG_NAND_IMX)			+= nand_imx.o
-obj-$(CONFIG_NAND_IMX_BBM)		+= nand_imx_bbm.o
 obj-$(CONFIG_NAND_OMAP_GPMC)		+= nand_omap_gpmc.o nand_omap_bch_decoder.o
 obj-$(CONFIG_MTD_NAND_OMAP_ELM)		+= omap_elm.o
 obj-$(CONFIG_NAND_ORION)		+= nand_orion.o
diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c
index 1a065cb46f..d69a012f01 100644
--- a/drivers/mtd/nand/nand_imx.c
+++ b/drivers/mtd/nand/nand_imx.c
@@ -1072,7 +1072,7 @@ static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
 
 static struct nand_bbt_descr bbt_main_descr = {
-	.options = NAND_BBT_LASTBLOCK
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_WRITE
 		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
 	.offs = 0,
 	.len = 4,
@@ -1082,7 +1082,7 @@ static struct nand_bbt_descr bbt_main_descr = {
 };
 
 static struct nand_bbt_descr bbt_mirror_descr = {
-	.options = NAND_BBT_LASTBLOCK
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_WRITE
 		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
 	.offs = 0,
 	.len = 4,
@@ -1117,6 +1117,106 @@ static int __init mxcnd_probe_dt(struct imx_nand_host *host)
 }
 
 /*
+ * The i.MX NAND controller has the problem that it handles the
+ * data in chunks of 512 bytes. It doesn't treat 2k NAND chips as
+ * 2048 byte data + 64 OOB, but instead:
+ *
+ * 512b data + 16b OOB +
+ * 512b data + 16b OOB +
+ * 512b data + 16b OOB +
+ * 512b data + 16b OOB
+ *
+ * This means that the factory provided bad block marker ends up
+ * in the page data at offset 2000 instead of in the OOB data.
+ *
+ * To preserve the factory bad block information we take the following
+ * strategy:
+ *
+ * - If the NAND driver detects that no flash BBT is present on 2k NAND
+ *   chips it will not create one because it would do so based on the wrong
+ *   BBM position
+ * - This command is used to create a flash BBT then.
+ *
+ * From this point on we can forget about the BBMs and rely completely
+ * on the flash BBT.
+ *
+ */
+static int checkbad(struct mtd_info *mtd, loff_t ofs)
+{
+	int ret;
+	uint8_t buf[mtd->writesize + mtd->oobsize];
+	struct mtd_oob_ops ops;
+
+	ops.mode = MTD_OPS_RAW;
+	ops.ooboffs = 0;
+	ops.datbuf = buf;
+	ops.len = mtd->writesize;
+	ops.oobbuf = buf + mtd->writesize;
+	ops.ooblen = mtd->oobsize;
+
+	ret = mtd_read_oob(mtd, ofs, &ops);
+	if (ret < 0)
+		return ret;
+
+	if (buf[2000] != 0xff)
+		return 1;
+
+	return 0;
+}
+
+static int imxnd_create_bbt(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int len, i, numblocks, ret;
+	loff_t from = 0;
+	uint8_t *bbt;
+
+	len = mtd->size >> (chip->bbt_erase_shift + 2);
+
+	/* Allocate memory (2bit per block) and clear the memory bad block table */
+	bbt = kzalloc(len, GFP_KERNEL);
+	if (!bbt)
+		return -ENOMEM;
+
+	numblocks = mtd->size >> (chip->bbt_erase_shift - 1);
+
+	for (i = 0; i < numblocks;) {
+		ret = checkbad(mtd, from);
+		if (ret < 0)
+			goto out;
+
+		if (ret) {
+			bbt[i >> 3] |= 0x03 << (i & 0x6);
+			dev_info(mtd->parent, "Bad eraseblock %d at 0x%08x\n",
+				 i >> 1, (unsigned int)from);
+		}
+
+		i += 2;
+		from += (1 << chip->bbt_erase_shift);
+	}
+
+	chip->bbt_td->options |= NAND_BBT_CREATE;
+	chip->bbt_md->options |= NAND_BBT_CREATE;
+
+	free(chip->bbt);
+	chip->bbt = bbt;
+
+	ret = nand_update_bbt(mtd, 0);
+	if (ret)
+		return ret;
+
+	ret = nand_default_bbt(mtd);
+	if (ret)
+		return ret;
+
+	ret = 0;
+out:
+	free(bbt);
+
+	return ret;
+}
+
+/*
  * This function is called during the driver binding process.
  *
  * @param   pdev  the device structure used to store device specific
@@ -1312,8 +1412,8 @@ static int __init imxnd_probe(struct device_d *dev)
 		if (nfc_is_v21())
 			writew(NFC_V2_SPAS_SPARESIZE(64), host->regs + NFC_V2_SPAS);
 	} else {
-		bbt_main_descr.options |= NAND_BBT_WRITE | NAND_BBT_CREATE;
-		bbt_mirror_descr.options |= NAND_BBT_WRITE | NAND_BBT_CREATE;
+		bbt_main_descr.options |= NAND_BBT_CREATE;
+		bbt_mirror_descr.options |= NAND_BBT_CREATE;
 
 		if (nfc_is_v21())
 			writew(NFC_V2_SPAS_SPARESIZE(16), host->regs + NFC_V2_SPAS);
@@ -1329,10 +1429,12 @@ static int __init imxnd_probe(struct device_d *dev)
 	}
 
 	if (host->flash_bbt && this->bbt_td->pages[0] == -1 && this->bbt_md->pages[0] == -1) {
-		dev_warn(dev, "no BBT found. create one using the imx_nand_bbm command\n");
-	} else {
-		bbt_main_descr.options |= NAND_BBT_WRITE | NAND_BBT_CREATE;
-		bbt_mirror_descr.options |= NAND_BBT_WRITE | NAND_BBT_CREATE;
+		dev_info(dev, "no BBT found. creating one\n");
+		err = imxnd_create_bbt(mtd);
+		if (err)
+			dev_warn(dev, "Failed to create bbt: %s\n",
+				 strerror(-err));
+		err = 0;
 	}
 
 	add_mtd_nand_device(mtd, "nand");
diff --git a/drivers/mtd/nand/nand_imx_bbm.c b/drivers/mtd/nand/nand_imx_bbm.c
deleted file mode 100644
index c005482b06..0000000000
--- a/drivers/mtd/nand/nand_imx_bbm.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * imx_nand_bbm.c - create a flash bad block table for i.MX NAND
- *
- * Copyright (c) 2013 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <command.h>
-#include <fs.h>
-#include <errno.h>
-#include <getopt.h>
-#include <fcntl.h>
-#include <malloc.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/err.h>
-
-/*
- * The i.MX NAND controller has the problem that it handles the
- * data in chunks of 512 bytes. It doesn't treat 2k NAND chips as
- * 2048 byte data + 64 OOB, but instead:
- *
- * 512b data + 16b OOB +
- * 512b data + 16b OOB +
- * 512b data + 16b OOB +
- * 512b data + 16b OOB
- *
- * This means that the factory provided bad block marker ends up
- * in the page data at offset 2000 instead of in the OOB data.
- *
- * To preserve the factory bad block information we take the following
- * strategy:
- *
- * - If the NAND driver detects that no flash BBT is present on 2k NAND
- *   chips it will not create one because it would do so based on the wrong
- *   BBM position
- * - This command is used to create a flash BBT then.
- *
- * From this point on we can forget about the BBMs and rely completely
- * on the flash BBT.
- *
- */
-static int checkbad(struct mtd_info *mtd, loff_t ofs)
-{
-	int ret;
-	uint8_t buf[mtd->writesize + mtd->oobsize];
-	struct mtd_oob_ops ops;
-
-	ops.mode = MTD_OPS_RAW;
-	ops.ooboffs = 0;
-	ops.datbuf = buf;
-	ops.len = mtd->writesize;
-	ops.oobbuf = buf + mtd->writesize;
-	ops.ooblen = mtd->oobsize;
-
-	ret = mtd_read_oob(mtd, ofs, &ops);
-	if (ret < 0)
-		return ret;
-
-	if (buf[2000] != 0xff)
-		return 1;
-
-	return 0;
-}
-
-static void *create_bbt(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	int len, i, numblocks, ret;
-	loff_t from = 0;
-	uint8_t *bbt;
-
-	if ((chip->bbt_td && chip->bbt_td->pages[0] != -1) ||
-			(chip->bbt_md && chip->bbt_md->pages[0] != -1)) {
-		printf("Flash bbt already present\n");
-		return ERR_PTR(-EEXIST);
-	}
-
-	len = mtd->size >> (chip->bbt_erase_shift + 2);
-
-	/* Allocate memory (2bit per block) and clear the memory bad block table */
-	bbt = kzalloc(len, GFP_KERNEL);
-	if (!bbt)
-		return ERR_PTR(-ENOMEM);
-
-	numblocks = mtd->size >> (chip->bbt_erase_shift - 1);
-
-	for (i = 0; i < numblocks;) {
-		ret = checkbad(mtd, from);
-		if (ret < 0)
-			goto out;
-
-		if (ret) {
-			bbt[i >> 3] |= 0x03 << (i & 0x6);
-			printf("Bad eraseblock %d at 0x%08x\n", i >> 1,
-					(unsigned int)from);
-		}
-
-		i += 2;
-		from += (1 << chip->bbt_erase_shift);
-	}
-
-	return bbt;
-
-out:
-	free(bbt);
-
-	return ERR_PTR(ret);
-}
-
-static int attach_bbt(struct mtd_info *mtd, void *bbt)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-
-	chip->bbt_td->options |= NAND_BBT_WRITE | NAND_BBT_CREATE;
-	chip->bbt_md->options |= NAND_BBT_WRITE | NAND_BBT_CREATE;
-	free(chip->bbt);
-	chip->bbt = bbt;
-
-	return nand_update_bbt(mtd, 0);
-}
-
-static int do_imx_nand_bbm(int argc, char *argv[])
-{
-	int opt, ret;
-	struct cdev *cdev;
-	struct mtd_info *mtd;
-	int yes = 0;
-	void *bbt;
-
-	while ((opt = getopt(argc, argv, "y")) > 0) {
-		switch (opt) {
-		case 'y':
-			yes = 1;
-			break;
-		default:
-			return COMMAND_ERROR_USAGE;
-		}
-	}
-
-	cdev = cdev_open("nand0", O_RDWR);
-	if (!cdev)
-		return -ENOENT;
-
-	mtd = cdev->mtd;
-	if (!mtd)
-		return -EINVAL;
-
-	if (strcmp(mtd->name, "imx_nand")) {
-		printf("This is not an i.MX nand but a %s\n", mtd->name);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	switch (mtd->writesize) {
-	case 512:
-		printf("writesize is 512. This command is not needed\n");
-		ret = 1;
-		goto out;
-	case 2048:
-		break;
-	default:
-		printf("not implemented for writesize %d\n", mtd->writesize);
-		ret = 1;
-		goto out;
-	}
-
-	bbt = create_bbt(mtd);
-	if (IS_ERR(bbt)) {
-		ret = 1;
-		goto out;
-	}
-
-	if (!yes) {
-		int c;
-
-		printf("create flash bbt (y/n)?");
-		c = getchar();
-		if (c == 'y')
-			yes = 1;
-		printf("\n");
-	}
-
-	if (!yes) {
-		free(bbt);
-		ret = 1;
-
-		goto out;
-	}
-
-	ret = attach_bbt(mtd, bbt);
-	if (!ret)
-		printf("bbt successfully added\n");
-	else
-		free(bbt);
-
-out:
-	cdev_close(cdev);
-
-	return ret;
-}
-
-BAREBOX_CMD_START(imx_nand_bbm)
-	.cmd		= do_imx_nand_bbm,
-	BAREBOX_CMD_DESC("create BBT for i.MX NAND")
-	BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
-BAREBOX_CMD_END
diff --git a/drivers/net/designware_socfpga.c b/drivers/net/designware_socfpga.c
index ce3ac38ebe..d6c28af45e 100644
--- a/drivers/net/designware_socfpga.c
+++ b/drivers/net/designware_socfpga.c
@@ -77,8 +77,7 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwc_dev *dwc_dev)
 	}
 
 	/* Assert reset to the enet controller before changing the phy mode */
-	if (eth_dev->rst)
-		reset_control_assert(eth_dev->rst);
+	reset_control_assert(eth_dev->rst);
 
 	ctrl = readl(dwc_dev->sys_mgr_base + reg_offset);
 	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
@@ -104,8 +103,7 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwc_dev *dwc_dev)
 	/* Deassert reset for the phy configuration to be sampled by
 	 * the enet controller, and operation to start in requested mode
 	 */
-	if (eth_dev->rst)
-		reset_control_deassert(eth_dev->rst);
+	reset_control_deassert(eth_dev->rst);
 
 	return 0;
 }
@@ -124,8 +122,7 @@ static int socfpga_gen10_set_phy_mode(struct socfpga_dwc_dev *dwc_dev)
 	}
 
 	/* Assert reset to the enet controller before changing the phy mode */
-	if (eth_dev->rst)
-		reset_control_assert(eth_dev->rst);
+	reset_control_assert(eth_dev->rst);
 
 	ctrl = readl(dwc_dev->sys_mgr_base + reg_offset);
 	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
@@ -151,8 +148,7 @@ static int socfpga_gen10_set_phy_mode(struct socfpga_dwc_dev *dwc_dev)
 	/* Deassert reset for the phy configuration to be sampled by
 	 * the enet controller, and operation to start in requested mode
 	 */
-	if (eth_dev->rst)
-		reset_control_deassert(eth_dev->rst);
+	reset_control_deassert(eth_dev->rst);
 
 	return 0;
 }
@@ -212,8 +208,10 @@ static int socfpga_dwc_ether_probe(struct device_d *dev)
 		return PTR_ERR(priv);
 
 	priv->rst = reset_control_get(dev, NULL);
-	if (IS_ERR(priv->rst))
-		dev_warn(dev, "No reset lines.\n");
+	if (IS_ERR(priv->rst)) {
+		dev_err(dev, "Invalid reset lines.\n");
+		return PTR_ERR(priv->rst);
+	}
 
 	dwc_dev->priv = priv;
 
diff --git a/drivers/net/designware_stm32.c b/drivers/net/designware_stm32.c
index 4c682a5dac..1e0cdfa695 100644
--- a/drivers/net/designware_stm32.c
+++ b/drivers/net/designware_stm32.c
@@ -57,12 +57,11 @@ static inline struct eqos_stm32 *to_stm32(struct eqos *eqos)
 	return eqos->priv;
 }
 
-enum { CLK_STMMACETH, CLK_MAX_RX, CLK_MAX_TX, CLK_SYSCFG,  };
+enum { CLK_STMMACETH, CLK_MAX_RX, CLK_MAX_TX, };
 static const struct clk_bulk_data stm32_clks[] = {
 	[CLK_STMMACETH] = { .id = "stmmaceth" },
 	[CLK_MAX_RX]    = { .id = "mac-clk-rx" },
 	[CLK_MAX_TX]    = { .id = "mac-clk-tx" },
-	[CLK_SYSCFG]    = { .id = "syscfg-clk" },
 };
 
 static unsigned long eqos_get_csr_clk_rate_stm32(struct eqos *eqos)
diff --git a/drivers/nvmem/ocotp.c b/drivers/nvmem/ocotp.c
index 79693e22e0..34e33dee82 100644
--- a/drivers/nvmem/ocotp.c
+++ b/drivers/nvmem/ocotp.c
@@ -712,6 +712,14 @@ static struct imx_ocotp_data imx6ul_ocotp_data = {
 	.format_mac = imx_ocotp_format_mac,
 };
 
+static struct imx_ocotp_data imx6ull_ocotp_data = {
+	.num_regs = 256,
+	.addr_to_offset = imx6q_addr_to_offset,
+	.mac_offsets_num = 2,
+	.mac_offsets = { MAC_OFFSET_0, IMX6UL_MAC_OFFSET_1 },
+	.format_mac = imx_ocotp_format_mac,
+};
+
 static struct imx_ocotp_data vf610_ocotp_data = {
 	.num_regs = 512,
 	.addr_to_offset = vf610_addr_to_offset,
@@ -742,6 +750,9 @@ static __maybe_unused struct of_device_id imx_ocotp_dt_ids[] = {
 		.compatible = "fsl,imx6ul-ocotp",
 		.data = &imx6ul_ocotp_data,
 	}, {
+		.compatible = "fsl,imx6ull-ocotp",
+		.data = &imx6ull_ocotp_data,
+	}, {
 		.compatible = "fsl,imx8mq-ocotp",
 		.data = &imx8mq_ocotp_data,
 	}, {
diff --git a/drivers/pci/pci-layerscape.c b/drivers/pci/pci-layerscape.c
index e20dd55b1f..c4ed529181 100644
--- a/drivers/pci/pci-layerscape.c
+++ b/drivers/pci/pci-layerscape.c
@@ -22,6 +22,8 @@
 #include <of_address.h>
 #include <of_pci.h>
 #include <regmap.h>
+#include <magicvar.h>
+#include <globalvar.h>
 #include <mfd/syscon.h>
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
@@ -57,6 +59,13 @@ struct ls_pcie_drvdata {
 	const struct dw_pcie_ops *dw_pcie_ops;
 };
 
+#define PCIE_LUT_ENTRY_COUNT    32
+
+struct ls_pcie_lut_entry {
+	int stream_id;
+	uint16_t devid;
+};
+
 struct ls_pcie {
 	struct dw_pcie pci;
 	void __iomem *lut;
@@ -65,6 +74,7 @@ struct ls_pcie {
 	const struct ls_pcie_drvdata *drvdata;
 	int index;
 	int next_lut_index;
+	struct ls_pcie_lut_entry luts[PCIE_LUT_ENTRY_COUNT];
 };
 
 static struct ls_pcie *to_ls_pcie(struct dw_pcie *pci)
@@ -72,11 +82,6 @@ static struct ls_pcie *to_ls_pcie(struct dw_pcie *pci)
 	return container_of(pci, struct ls_pcie, pci);
 }
 
-static u32 lut_readl(struct ls_pcie *pcie, unsigned int offset)
-{
-	return in_be32(pcie->lut + offset);
-}
-
 static void lut_writel(struct ls_pcie *pcie, unsigned int value,
 		       unsigned int offset)
 {
@@ -98,8 +103,6 @@ static int ls_pcie_next_streamid(struct ls_pcie *pcie)
 	return current;
 }
 
-#define PCIE_LUT_ENTRY_COUNT    32
-
 static int ls_pcie_next_lut_index(struct ls_pcie *pcie)
 {
 	if (pcie->next_lut_index < PCIE_LUT_ENTRY_COUNT)
@@ -108,14 +111,6 @@ static int ls_pcie_next_lut_index(struct ls_pcie *pcie)
 		return -ENOSPC;  /* LUT is full */
 }
 
-static void ls_pcie_lut_set_mapping(struct ls_pcie *pcie, int index, u32 devid,
-				    u32 stream_id)
-{
-	/* leave mask as all zeroes, want to match all bits */
-	lut_writel(pcie, devid << 16, PCIE_LUT_UDR(index));
-	lut_writel(pcie, stream_id | PCIE_LUT_ENABLE, PCIE_LUT_LDR(index));
-}
-
 static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
 {
 	struct dw_pcie *pci = &pcie->pci;
@@ -354,6 +349,24 @@ static phandle ls_pcie_get_iommu_handle(struct device_node *np, phandle *handle)
 	return 0;
 }
 
+/*
+ * Normally every device gets its own stream_id. The stream_ids are communicated
+ * to the kernel in the device tree and are also configured in the controllers
+ * LUT table.
+ * This only works when all PCI devices are known in the bootloader which may not
+ * always be the case. For example, when a PCI device is a FPGA and its firmware
+ * is only loaded under Linux, then the device is not known to barebox and thus
+ * not assigned a stream_id.
+ *
+ * With ls_pcie_share_stream_id = true all devices on a host controller get the
+ * same stream_id assigned.
+ */
+static int ls_pcie_share_stream_id;
+
+BAREBOX_MAGICVAR_NAMED(global_ls_pcie_share_stream_id,
+		       global.layerscape_pcie.share_stream_ids,
+		       "If true, use a stream_id per host controller and not per device");
+
 static int ls_pcie_of_fixup(struct device_node *root, void *ctx)
 {
 	struct ls_pcie *pcie = ctx;
@@ -375,8 +388,6 @@ static int ls_pcie_of_fixup(struct device_node *root, void *ctx)
 			return -ENODEV;
 	} while (!of_device_is_compatible(np, pcie->compatible));
 
-	nluts = pcie->next_lut_index;
-
 	ret = of_property_read_u32(np, "msi-parent", &phandle);
 	if (ret) {
 		dev_err(pcie->pci.dev, "Unable to get \"msi-parent\" phandle\n");
@@ -389,28 +400,56 @@ static int ls_pcie_of_fixup(struct device_node *root, void *ctx)
 		return ret;
 	}
 
-	msi_map = xmalloc(nluts * sizeof(u32) * 4);
-	iommu_map = xmalloc(nluts * sizeof(u32) * 4);
-
-	for (i = 0; i < nluts; i++) {
-		u32 udr = lut_readl(pcie, PCIE_LUT_UDR(i));
-		u32 ldr = lut_readl(pcie, PCIE_LUT_LDR(i));
-
-		if (!(ldr & PCIE_LUT_ENABLE))
-			break;
-
-		devid = udr >> 16;
-		stream_id = ldr & 0x7fff;
-
-		msi_map[i * 4] = devid;
-		msi_map[i * 4 + 1] = phandle;
-		msi_map[i * 4 + 2] = stream_id;
-		msi_map[i * 4 + 3] = 1;
+	if (ls_pcie_share_stream_id) {
+		nluts = 1;
+		iommu_map = xmalloc(nluts * sizeof(u32) * 4);
+		msi_map = xmalloc(nluts * sizeof(u32) * 4);
+		stream_id = pcie->luts[0].stream_id;
+
+		dev_dbg(pcie->pci.dev, "Using stream_id %d\n", stream_id);
+
+		msi_map[0] = 0;
+		msi_map[1] = phandle;
+		msi_map[2] = stream_id;
+		msi_map[3] = 0x10000;
+
+		iommu_map[0] = 0;
+		iommu_map[1] = iommu_handle;
+		iommu_map[2] = stream_id;
+		iommu_map[3] = 0x10000;
+
+		lut_writel(pcie, 0xffff, PCIE_LUT_UDR(0));
+		lut_writel(pcie, pcie->luts[0].stream_id | PCIE_LUT_ENABLE, PCIE_LUT_LDR(0));
+	} else {
+		nluts = pcie->next_lut_index;
+		iommu_map = xmalloc(nluts * sizeof(u32) * 4);
+		msi_map = xmalloc(nluts * sizeof(u32) * 4);
+
+		for (i = 0; i < nluts; i++) {
+			devid = pcie->luts[i].devid;
+			stream_id = pcie->luts[i].stream_id;
+
+			dev_dbg(pcie->pci.dev, "Using stream_id %d for device 0x%04x\n",
+				stream_id, devid);
+
+			msi_map[i * 4] = devid;
+			msi_map[i * 4 + 1] = phandle;
+			msi_map[i * 4 + 2] = stream_id;
+			msi_map[i * 4 + 3] = 1;
+
+			iommu_map[i * 4] = devid;
+			iommu_map[i * 4 + 1] = iommu_handle;
+			iommu_map[i * 4 + 2] = stream_id;
+			iommu_map[i * 4 + 3] = 1;
+
+			lut_writel(pcie, pcie->luts[i].devid << 16, PCIE_LUT_UDR(i));
+			lut_writel(pcie, pcie->luts[i].stream_id | PCIE_LUT_ENABLE, PCIE_LUT_LDR(i));
+		}
+	}
 
-		iommu_map[i * 4] = devid;
-		iommu_map[i * 4 + 1] = iommu_handle;
-		iommu_map[i * 4 + 2] = stream_id;
-		iommu_map[i * 4 + 3] = 1;
+	for (i = nluts; i < PCIE_LUT_ENTRY_COUNT; i++) {
+		lut_writel(pcie, 0, PCIE_LUT_UDR(i));
+		lut_writel(pcie, 0, PCIE_LUT_LDR(i));
 	}
 
 	/*
@@ -448,6 +487,13 @@ static int __init ls_pcie_probe(struct device_d *dev)
 	struct resource *dbi_base;
 	const struct of_device_id *match;
 	int ret;
+	static int once;
+
+	if (!once) {
+		globalvar_add_simple_bool("layerscape_pcie.share_stream_ids",
+					  &ls_pcie_share_stream_id);
+		once = 1;
+	}
 
 	pcie = xzalloc(sizeof(*pcie));
 	if (!pcie)
@@ -502,6 +548,7 @@ static void ls_pcie_fixup(struct pci_dev *pcidev)
 	struct dw_pcie *dwpcie = container_of(pp, struct dw_pcie, pp);
 	struct ls_pcie *lspcie = container_of(dwpcie, struct ls_pcie, pci);
 	int stream_id, index;
+	uint32_t devid;
 	int base_bus_num = 0;
 
 	stream_id = ls_pcie_next_streamid(lspcie);
@@ -513,9 +560,10 @@ static void ls_pcie_fixup(struct pci_dev *pcidev)
 		p = p->parent_bus;
 	}
 
-	ls_pcie_lut_set_mapping(lspcie, index,
-				(pcidev->bus->number - base_bus_num) << 8 | pcidev->devfn,
-				stream_id);
+	devid = (pcidev->bus->number - base_bus_num) << 8 | pcidev->devfn;
+
+	lspcie->luts[index].devid = devid;
+	lspcie->luts[index].stream_id = stream_id;
 }
 
 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ls_pcie_fixup);
diff --git a/drivers/pinctrl/imx-iomux-v3.c b/drivers/pinctrl/imx-iomux-v3.c
index 5fadc84151..1d2b76d632 100644
--- a/drivers/pinctrl/imx-iomux-v3.c
+++ b/drivers/pinctrl/imx-iomux-v3.c
@@ -216,11 +216,14 @@ static int imx_iomux_v3_probe(struct device_d *dev)
 	return ret;
 }
 
+static struct imx_iomux_v3_data imx_iomux_imx6_snvs_data = {
+	.flags = ZERO_OFFSET_VALID,
+};
+
 static struct imx_iomux_v3_data imx_iomux_imx7_lpsr_data = {
 	.flags = ZERO_OFFSET_VALID | IMX7_PINMUX_LPSR,
 };
 
-
 static __maybe_unused struct of_device_id imx_iomux_v3_dt_ids[] = {
 	{
 		.compatible = "fsl,imx25-iomuxc",
@@ -239,6 +242,9 @@ static __maybe_unused struct of_device_id imx_iomux_v3_dt_ids[] = {
 	}, {
 		.compatible = "fsl,imx6ul-iomuxc",
 	}, {
+		.compatible = "fsl,imx6ull-iomuxc-snvs",
+		.data = &imx_iomux_imx6_snvs_data,
+	}, {
 		.compatible = "fsl,imx6sl-iomuxc",
 	}, {
 		.compatible = "fsl,imx7d-iomuxc",
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 3c581ed5d3..2cd58df931 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -29,7 +29,13 @@ struct pinctrl_single {
 	struct pinctrl_device pinctrl;
 	unsigned (*read)(void __iomem *reg);
 	void (*write)(unsigned val, void __iomem *reg);
-	unsigned width;
+	unsigned int width;
+	unsigned int  fmask;
+	unsigned int fshift;
+	unsigned int fmax;
+
+	bool bits_per_mux;
+	unsigned int bits_per_pin;
 };
 
 static unsigned __maybe_unused pcs_readb(void __iomem *reg)
@@ -66,27 +72,47 @@ static int pcs_set_state(struct pinctrl_device *pdev, struct device_node *np)
 {
 	struct pinctrl_single *pcs = container_of(pdev, struct pinctrl_single, pinctrl);
 	unsigned size = 0, index = 0;
+	unsigned int offset, val, rows, mask, reg, i;
 	const __be32 *mux;
 
 	dev_dbg(pcs->pinctrl.dev, "set state: %s\n", np->full_name);
-
-	mux = of_get_property(np, "pinctrl-single,pins", &size);
-
-	size /= sizeof(*mux);	/* Number of elements in array */
-
-	if (!mux || !size || (size & 1)) {
-		dev_err(pcs->pinctrl.dev, "bad data for mux %s\n",
-			np->full_name);
-		return -EINVAL;
-	}
-
-	while (index < size) {
-		unsigned offset, val;
-
-		offset = be32_to_cpup(mux + index++);
-		val = be32_to_cpup(mux + index++);
-
-		pcs->write(val, pcs->base + offset);
+	if (pcs->bits_per_mux) {
+		mux = of_get_property(np, "pinctrl-single,bits", &size);
+		if (size % 3 != 0)
+			dev_err(pcs->pinctrl.dev,
+				"invalid args_count for spec: %u\n", size);
+
+		size /= sizeof(*mux);	/* Number of elements in array */
+		rows = size / 3;
+
+		for (i = 0; i < rows; i++) {
+			offset = be32_to_cpup(mux + index++);
+			val = be32_to_cpup(mux + index++);
+			mask = be32_to_cpup(mux + index++);
+			reg = pcs->read(pcs->base + offset);
+			reg &= ~mask;
+			reg |= val;
+			pcs->write(reg, pcs->base + offset);
+		}
+	} else {
+		mux = of_get_property(np, "pinctrl-single,pins", &size);
+
+		size /= sizeof(*mux);	/* Number of elements in array */
+
+		if (!mux || !size || (size & 1)) {
+			dev_err(pcs->pinctrl.dev, "bad data for mux %s\n",
+				np->full_name);
+			return -EINVAL;
+		}
+
+		while (index < size) {
+			unsigned int offset, val;
+
+			offset = be32_to_cpup(mux + index++);
+			val = be32_to_cpup(mux + index++);
+
+			pcs->write(val, pcs->base + offset);
+		}
 	}
 
 	return 0;
@@ -137,6 +163,23 @@ static int pcs_probe(struct device_d *dev)
 		goto out;
 	}
 
+	ret = of_property_read_u32(np, "pinctrl-single,function-mask",
+				   &pcs->fmask);
+	if (!ret) {
+		pcs->fshift = __ffs(pcs->fmask);
+		pcs->fmax = pcs->fmask >> pcs->fshift;
+	} else {
+		/* If mask property doesn't exist, function mux is invalid. */
+		pcs->fmask = 0;
+		pcs->fshift = 0;
+		pcs->fmax = 0;
+	}
+
+	pcs->bits_per_mux =
+		of_property_read_bool(np, "pinctrl-single,bit-per-mux");
+	if (pcs->bits_per_mux)
+		pcs->bits_per_pin = fls(pcs->fmask);
+
 	ret = pinctrl_register(&pcs->pinctrl);
 	if (ret)
 		goto out;
diff --git a/drivers/pwm/pxa_pwm.c b/drivers/pwm/pxa_pwm.c
index c7130c225e..4575817e94 100644
--- a/drivers/pwm/pxa_pwm.c
+++ b/drivers/pwm/pxa_pwm.c
@@ -34,8 +34,6 @@ struct pxa_pwm_chip {
 	struct pwm_chip chip;
 	void __iomem *iobase;
 	int id;
-	int duty_ns;
-	int period_ns;
 };
 
 static struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
@@ -72,15 +70,12 @@ static int pxa_pwm_config(struct pwm_chip *chip, int duty_ns, int period_ns)
 	else
 		dc = (pv + 1) * duty_ns / period_ns;
 
-	pxa_pwm->duty_ns = duty_ns;
-	pxa_pwm->period_ns = period_ns;
-
 	/* NOTE: the clock to PWM has to be enabled first
 	 * before writing to the registers
 	 */
-	__raw_writel(prescale, pxa_pwm->iobase + PWMCR);
-	__raw_writel(dc, pxa_pwm->iobase + PWMDCR);
-	__raw_writel(pv, pxa_pwm->iobase + PWMPCR);
+	writel(prescale, pxa_pwm->iobase + PWMCR);
+	writel(dc, pxa_pwm->iobase + PWMDCR);
+	writel(pv, pxa_pwm->iobase + PWMPCR);
 
 	return 0;
 }
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 28bd69a2a5..f47a115da2 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -19,7 +19,7 @@ config REGULATOR_BCM283X
 config REGULATOR_PFUZE
 	bool "Freescale PFUZE100/200/3000 regulator driver"
 	depends on I2C
-	depends on ARCH_IMX6
+	depends on ARCH_IMX6 || ARCH_IMX8MQ
 
 config REGULATOR_STPMIC1
 	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index cb5d785817..78b8290ff2 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -86,7 +86,8 @@ static int regulator_fixed_probe(struct device_d *dev)
 	fix->rdesc.ops = &fixed_ops;
 	fix->rdev.desc = &fix->rdesc;
 
-	if (of_find_property(dev->device_node, "regulator-always-on", NULL)) {
+	if (of_find_property(dev->device_node, "regulator-always-on", NULL) ||
+	    of_find_property(dev->device_node, "regulator-boot-on", NULL)) {
 		fix->always_on = 1;
 		regulator_fixed_enable(&fix->rdev);
 	}
diff --git a/drivers/regulator/pfuze.c b/drivers/regulator/pfuze.c
index 1950ffb04c..91aaec0e7e 100644
--- a/drivers/regulator/pfuze.c
+++ b/drivers/regulator/pfuze.c
@@ -31,8 +31,6 @@
 
 #define DRIVERNAME		"pfuze"
 
-#define MC13XXX_NUMREGS		0x3f
-
 #define PFUZE100_SW1ABMODE	0x23
 #define PFUZE100_SW1CMODE	0x31
 #define PFUZE100_SW2MODE	0x38
@@ -144,8 +142,6 @@ static void pfuze_power_off_prepare(struct poweroff_handler *handler)
 	regmap_write_bits(pfuze_dev->map, PFUZE100_VGEN6VOL,
 			  PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
 			  PFUZE100_VGENxSTBY);
-
-	imx6_pm_stby_poweroff();
 }
 
 static struct regmap_bus regmap_pfuze_i2c_bus = {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8874775f17..466bbe527b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -406,6 +406,9 @@ static int usb_device_list_scan(void)
 			if (ret)
 				goto out;
 		}
+
+		/* Avoid hammering the HUB with port scans */
+		mdelay(25);
 	}
 
 out:
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index 96aecacc27..426ee9db0b 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -769,7 +769,7 @@ static void __maybe_unused cb_boot(struct f_fastboot *f_fb, const char *opt)
 	globalvar_set_match("linux.bootargs.dyn.", "");
 	globalvar_set_match("bootm.image", "");
 
-	data.os_file = xstrdup(FASTBOOT_TMPFILE);
+	data.os_file = FASTBOOT_TMPFILE;
 
 	ret = bootm_boot(&data);
 
diff --git a/drivers/usb/gadget/fsl_udc.c b/drivers/usb/gadget/fsl_udc.c
index a44c7abc01..c7160cdbc7 100644
--- a/drivers/usb/gadget/fsl_udc.c
+++ b/drivers/usb/gadget/fsl_udc.c
@@ -1128,18 +1128,18 @@ out:
 
 /* Fill in the dTD structure
  * @req: request that the transfer belongs to
- * @length: return actually data length of the dTD
  * @dma: return dma address of the dTD
  * @is_last: return flag if it is the last dTD of the request
  * return: pointer to the built dTD */
-static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
+static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req,
 		dma_addr_t *dma, int *is_last)
 {
+	unsigned length;
 	u32 swap_temp;
 	struct ep_td_struct *dtd;
 
 	/* how big will this transfer be? */
-	*length = min(req->req.length - req->req.actual,
+	length = min(req->req.length - req->req.actual,
 			(unsigned)EP_MAX_LENGTH_TRANSFER);
 
 	dtd = dma_alloc_coherent(sizeof(struct ep_td_struct),
@@ -1161,11 +1161,11 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 	dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000);
 	dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000);
 
-	req->req.actual += *length;
+	req->req.actual += length;
 
 	/* zlp is needed if req->req.zero is set */
 	if (req->req.zero) {
-		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+		if (length == 0 || (length % req->ep->ep.maxpacket) != 0)
 			*is_last = 1;
 		else
 			*is_last = 0;
@@ -1177,7 +1177,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 	if ((*is_last) == 0)
 		VDBG("multi-dtd request!");
 	/* Fill in the transfer size; set active bit */
-	swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
+	swap_temp = ((length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
 
 	/* Enable interrupt for the last dtd of a request */
 	if (*is_last && !req->req.no_interrupt)
@@ -1193,14 +1193,13 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
 /* Generate dtd chain for a request */
 static int fsl_req_to_dtd(struct fsl_req *req)
 {
-	unsigned	count;
 	int		is_last;
 	int		is_first =1;
 	struct ep_td_struct	*last_dtd = NULL, *dtd;
 	dma_addr_t dma;
 
 	do {
-		dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+		dtd = fsl_build_dtd(req, &dma, &is_last);
 		if (dtd == NULL)
 			return -ENOMEM;
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4c11e6580c..b84da5516c 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1136,8 +1136,9 @@ fail2:
 	musb_platform_exit(musb);
 
 fail1:
-	dev_err(musb->controller,
-		"musb_init_controller failed with status %d\n", status);
+	if (status != -EPROBE_DEFER)
+		dev_err(musb->controller,
+			"musb_init_controller failed with status %d\n", status);
 
 	musb_free(musb);
 
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 3b76b6cc61..d54a663e9d 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -39,7 +39,6 @@
 #include <linux/barebox-wrapper.h>
 
 #include "musb_core.h"
-#include "phy-am335x.h"
 
 static __maybe_unused struct of_device_id musb_dsps_dt_ids[];
 
@@ -217,10 +216,6 @@ static int dsps_musb_init(struct musb *musb)
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	u32 rev, val, mode;
 
-	musb->xceiv = am335x_get_usb_phy();
-	if (IS_ERR(musb->xceiv))
-		return PTR_ERR(musb->xceiv);
-
 	/* Returns zero if e.g. not clocked */
 	rev = dsps_readl(musb->ctrl_base, wrp->revision);
 	if (!rev)
@@ -319,11 +314,13 @@ static int dsps_set_mode(void *ctx, enum usb_dr_mode mode)
 
 static int dsps_probe(struct device_d *dev)
 {
-	struct resource *iores;
+	struct resource *iores[2];
 	struct musb_hdrc_platform_data *pdata;
 	struct musb_hdrc_config	*config;
 	struct device_node *dn = dev->device_node;
 	const struct dsps_musb_wrapper *wrp;
+	struct device_node *phy_node;
+	struct device_d *phy_dev;
 	struct dsps_glue *glue;
 	int ret;
 
@@ -337,6 +334,14 @@ static int dsps_probe(struct device_d *dev)
 		return -ENODEV;
 	}
 
+	phy_node = of_parse_phandle(dn, "phys", 0);
+	if (!phy_node)
+		return -ENODEV;
+
+	phy_dev = of_find_device_by_node(phy_node);
+	if (!phy_dev || !phy_dev->priv)
+		return -EPROBE_DEFER;
+
 	/* allocate glue */
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
@@ -349,17 +354,22 @@ static int dsps_probe(struct device_d *dev)
 
 	pdata = &glue->pdata;
 
-	iores = dev_request_mem_resource(dev, 0);
-	if (IS_ERR(iores))
-		return PTR_ERR(iores);
-	glue->musb.mregs = IOMEM(iores->start);
+	iores[0] = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(iores[0])) {
+		ret = PTR_ERR(iores[0]);
+		goto free_glue;
+	}
+	glue->musb.mregs = IOMEM(iores[0]->start);
 
-	iores = dev_request_mem_resource(dev, 1);
-	if (IS_ERR(iores))
-		return PTR_ERR(iores);
-	glue->musb.ctrl_base = IOMEM(iores->start);
+	iores[1] = dev_request_mem_resource(dev, 1);
+	if (IS_ERR(iores[1])) {
+		ret = PTR_ERR(iores[1]);
+		goto release_iores0;
+	}
+	glue->musb.ctrl_base = IOMEM(iores[1]->start);
 
 	glue->musb.controller = dev;
+	glue->musb.xceiv = phy_dev->priv;
 
 	config = &glue->config;
 
@@ -377,11 +387,24 @@ static int dsps_probe(struct device_d *dev)
 	if (pdata->mode == MUSB_PORT_MODE_DUAL_ROLE) {
 		ret = usb_register_otg_device(dev, dsps_set_mode, glue);
 		if (ret)
-			return ret;
+			goto release_iores1;
 		return 0;
 	}
 
-	return musb_init_controller(&glue->musb, pdata);
+	ret = musb_init_controller(&glue->musb, pdata);
+	if (ret)
+		goto release_iores1;
+
+	return 0;
+
+release_iores1:
+	release_region(iores[1]);
+release_iores0:
+	release_region(iores[0]);
+free_glue:
+	free(glue);
+
+	return ret;
 }
 
 static const struct dsps_musb_wrapper am33xx_driver_data = {
diff --git a/drivers/usb/musb/phy-am335x-control.c b/drivers/usb/musb/phy-am335x-control.c
index c84525ec7e..41a3689ed3 100644
--- a/drivers/usb/musb/phy-am335x-control.c
+++ b/drivers/usb/musb/phy-am335x-control.c
@@ -109,15 +109,15 @@ struct phy_control *am335x_get_phy_control(struct device_d *dev)
 
 	node = of_parse_phandle(dev->device_node, "ti,ctrl_mod", 0);
 	if (!node)
-		return NULL;
+		return ERR_PTR(-ENOENT);
 
 	dev = of_find_device_by_node(node);
 	if (!dev)
-		return NULL;
+		return ERR_PTR(-EPROBE_DEFER);
 
 	ctrl_usb = dev->priv;
 	if (!ctrl_usb)
-		return NULL;
+		return ERR_PTR(-EPROBE_DEFER);
 
 	return &ctrl_usb->phy_ctrl;
 }
@@ -141,13 +141,17 @@ static int am335x_control_usb_probe(struct device_d *dev)
 	ctrl_usb->dev = dev;
 
 	iores = dev_request_mem_resource(dev, 0);
-	if (IS_ERR(iores))
-		return PTR_ERR(iores);
+	if (IS_ERR(iores)) {
+		ret = PTR_ERR(iores);
+		goto free_ctrl;
+	}
 	ctrl_usb->phy_reg = IOMEM(iores->start);
 
 	iores = dev_request_mem_resource(dev, 1);
-	if (IS_ERR(iores))
-		return PTR_ERR(iores);
+	if (IS_ERR(iores)) {
+		ret = PTR_ERR(iores);
+		goto release_resource;
+	}
 	ctrl_usb->wkup = IOMEM(iores->start);
 
 	spin_lock_init(&ctrl_usb->lock);
@@ -155,6 +159,13 @@ static int am335x_control_usb_probe(struct device_d *dev)
 
 	dev->priv = ctrl_usb;
 	return 0;
+
+release_resource:
+	release_region(iores);
+free_ctrl:
+	free(ctrl_usb);
+
+	return 0;
 };
 
 static struct driver_d am335x_control_driver = {
diff --git a/drivers/usb/musb/phy-am335x.c b/drivers/usb/musb/phy-am335x.c
index df31255d89..f2e870d7ee 100644
--- a/drivers/usb/musb/phy-am335x.c
+++ b/drivers/usb/musb/phy-am335x.c
@@ -5,7 +5,6 @@
 #include <linux/err.h>
 #include "am35x-phy-control.h"
 #include "musb_core.h"
-#include "phy-am335x.h"
 
 struct am335x_usbphy {
 	void __iomem *base;
@@ -14,13 +13,6 @@ struct am335x_usbphy {
 	struct usb_phy phy;
 };
 
-static struct am335x_usbphy *am_usbphy;
-
-struct usb_phy *am335x_get_usb_phy(void)
-{
-	return &am_usbphy->phy;
-}
-
 static int am335x_init(struct usb_phy *phy)
 {
 	struct am335x_usbphy *am_usbphy = container_of(phy, struct am335x_usbphy, phy);
@@ -31,6 +23,7 @@ static int am335x_init(struct usb_phy *phy)
 
 static int am335x_phy_probe(struct device_d *dev)
 {
+	struct am335x_usbphy *am_usbphy;
 	struct resource *iores;
 	int ret;
 
@@ -44,22 +37,27 @@ static int am335x_phy_probe(struct device_d *dev)
 	am_usbphy->base = IOMEM(iores->start);
 
 	am_usbphy->phy_ctrl = am335x_get_phy_control(dev);
-	if (!am_usbphy->phy_ctrl)
-		return -ENODEV;
+	if (IS_ERR(am_usbphy->phy_ctrl)) {
+		ret = PTR_ERR(am_usbphy->phy_ctrl);
+		goto err_release;
+	}
 
 	am_usbphy->id = of_alias_get_id(dev->device_node, "phy");
 	if (am_usbphy->id < 0) {
 		dev_err(dev, "Missing PHY id: %d\n", am_usbphy->id);
-		return am_usbphy->id;
+		ret = am_usbphy->id;
+		goto err_release;
 	}
 
 	am_usbphy->phy.init = am335x_init;
-	dev->priv = am_usbphy;
+	dev->priv = &am_usbphy->phy;
 
 	dev_info(dev, "am_usbphy %p enabled\n", &am_usbphy->phy);
 
 	return 0;
 
+err_release:
+	release_region(iores);
 err_free:
 	free(am_usbphy);
 
diff --git a/drivers/usb/musb/phy-am335x.h b/drivers/usb/musb/phy-am335x.h
deleted file mode 100644
index 27da2e3b10..0000000000
--- a/drivers/usb/musb/phy-am335x.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _PHY_AM335x_H_
-#define _PHY_AM335x_H_
-
-struct usb_phy *am335x_get_usb_phy(void);
-
-#endif
diff --git a/drivers/video/backlight-pwm.c b/drivers/video/backlight-pwm.c
index 997235a74a..9111a42d75 100644
--- a/drivers/video/backlight-pwm.c
+++ b/drivers/video/backlight-pwm.c
@@ -204,8 +204,6 @@ static int backlight_pwm_of_probe(struct device_d *dev)
 		return PTR_ERR(pwm_backlight->power);
 	}
 
-	pwm_backlight->period = pwm_get_period(pwm_backlight->pwm);
-
 	pwm_backlight->backlight.slew_time_ms = 100;
 	pwm_backlight->backlight.brightness_set = backlight_pwm_set;
 	pwm_backlight->backlight.node = dev->device_node;
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 85e810f248..cb0d17e361 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -72,9 +72,9 @@ static int dw_wdt_stop(struct watchdog *wdd)
 {
 	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
 
-	if (IS_ERR(dw_wdt->rst)) {
-		dev_warn(dw_wdt->wdd.hwdev, "No reset line. Will not stop.\n");
-		return PTR_ERR(dw_wdt->rst);
+	if (!dw_wdt->rst) {
+		dev_warn(dw_wdt->wdd.hwdev, "No reset line\n");
+		return -ENOSYS;
 	}
 
 	reset_control_assert(dw_wdt->rst);
@@ -153,7 +153,7 @@ static int dw_wdt_drv_probe(struct device_d *dev)
 
 	dw_wdt->rst = reset_control_get(dev, NULL);
 	if (IS_ERR(dw_wdt->rst))
-		dev_warn(dev, "No reset lines. Will not be able to stop once started.\n");
+		return PTR_ERR(dw_wdt->rst);
 
 	wdd = &dw_wdt->wdd;
 	wdd->name = "dw_wdt";
@@ -171,8 +171,10 @@ static int dw_wdt_drv_probe(struct device_d *dev)
 	if (ret)
 		dev_warn(dev, "cannot register restart handler\n");
 
-	if (!IS_ERR(dw_wdt->rst))
+	if (dw_wdt->rst)
 		reset_control_deassert(dw_wdt->rst);
+	else
+		dev_warn(dev, "No reset lines. Will not be able to stop once started.\n");
 
 	return 0;
 
@@ -187,6 +189,7 @@ static struct of_device_id dw_wdt_of_match[] = {
 };
 
 static struct driver_d dw_wdt_driver = {
+	.name		= "dw-wdt",
 	.probe		= dw_wdt_drv_probe,
 	.of_compatible	= DRV_OF_COMPAT(dw_wdt_of_match),
 };
diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
index b6e2a37b1f..34040408f7 100644
--- a/drivers/watchdog/wd_core.c
+++ b/drivers/watchdog/wd_core.c
@@ -171,8 +171,10 @@ int watchdog_register(struct watchdog *wd)
 		return ret;
 
 	p = dev_add_param_tristate_ro(&wd->dev, "running", &wd->running);
-	if (IS_ERR(p))
-		return PTR_ERR(p);
+	if (IS_ERR(p)) {
+		ret = PTR_ERR(p);
+		goto error_unregister;
+	}
 
 	if (!wd->priority)
 		wd->priority = dev_get_watchdog_priority(wd->hwdev);
@@ -180,8 +182,10 @@ int watchdog_register(struct watchdog *wd)
 	p = dev_add_param_uint32(&wd->dev, "priority",
 				 watchdog_set_priority, NULL,
 				 &wd->priority, "%u", wd);
-	if (IS_ERR(p))
-		return PTR_ERR(p);
+	if (IS_ERR(p)) {
+		ret = PTR_ERR(p);
+		goto error_unregister;
+	}
 
 	/* set some default sane value */
 	if (!wd->timeout_max)
@@ -189,8 +193,10 @@ int watchdog_register(struct watchdog *wd)
 
 	p = dev_add_param_uint32_ro(&wd->dev, "timeout_max",
 			&wd->timeout_max, "%u");
-	if (IS_ERR(p))
-		return PTR_ERR(p);
+	if (IS_ERR(p)) {
+		ret = PTR_ERR(p);
+		goto error_unregister;
+	}
 
 	if (IS_ENABLED(CONFIG_WATCHDOG_POLLER)) {
 		if (!wd->poller_timeout_cur ||
@@ -199,12 +205,14 @@ int watchdog_register(struct watchdog *wd)
 
 		p = dev_add_param_uint32(&wd->dev, "timeout_cur", watchdog_set_cur,
 				NULL, &wd->poller_timeout_cur, "%u", wd);
-		if (IS_ERR(p))
-			return PTR_ERR(p);
+		if (IS_ERR(p)) {
+			ret = PTR_ERR(p);
+			goto error_unregister;
+		}
 
 		ret = watchdog_register_poller(wd);
 		if (ret)
-			return ret;
+			goto error_unregister;
 	}
 
 	list_add_tail(&wd->list, &watchdog_list);
@@ -213,6 +221,10 @@ int watchdog_register(struct watchdog *wd)
 			wd->priority);
 
 	return 0;
+
+error_unregister:
+	unregister_device(&wd->dev);
+	return ret;
 }
 EXPORT_SYMBOL(watchdog_register);
 
diff --git a/dts/Bindings/arm/amlogic.yaml b/dts/Bindings/arm/amlogic.yaml
index c6a443352e..f74aba48ce 100644
--- a/dts/Bindings/arm/amlogic.yaml
+++ b/dts/Bindings/arm/amlogic.yaml
@@ -59,6 +59,7 @@ properties:
               - friendlyarm,nanopi-k2
               - hardkernel,odroid-c2
               - nexbox,a95x
+              - videostrong,kii-pro
               - wetek,hub
               - wetek,play2
           - const: amlogic,meson-gxbb
@@ -104,6 +105,7 @@ properties:
           - enum:
               - amlogic,p230
               - amlogic,p231
+              - libretech,aml-s905d-pc
               - phicomm,n1
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
@@ -115,6 +117,7 @@ properties:
               - amlogic,q201
               - khadas,vim2
               - kingnovel,r-box-pro
+              - libretech,aml-s912-pc
               - nexbox,a1
               - tronsmart,vega-s96
           - const: amlogic,s912
diff --git a/dts/Bindings/arm/arm-boards b/dts/Bindings/arm/arm-boards
index b2a9f9f843..96b1dad582 100644
--- a/dts/Bindings/arm/arm-boards
+++ b/dts/Bindings/arm/arm-boards
@@ -121,7 +121,7 @@ Required properties (in root node):
 Required nodes:
 
 - soc: some node of the RealView platforms must be the SoC
-  node that contain the SoC-specific devices, withe the compatible
+  node that contain the SoC-specific devices, with the compatible
   string set to one of these tuples:
    "arm,realview-eb-soc", "simple-bus"
    "arm,realview-pb1176-soc", "simple-bus"
diff --git a/dts/Bindings/arm/atmel-at91.yaml b/dts/Bindings/arm/atmel-at91.yaml
index 6dd8be4016..0357314076 100644
--- a/dts/Bindings/arm/atmel-at91.yaml
+++ b/dts/Bindings/arm/atmel-at91.yaml
@@ -37,6 +37,16 @@ properties:
 
       - items:
           - enum:
+              - overkiz,kizboxmini-base # Overkiz kizbox Mini Base Board
+              - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
+              - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
+              - overkiz,smartkiz        # Overkiz SmartKiz Board
+          - const: atmel,at91sam9g25
+          - const: atmel,at91sam9x5
+          - const: atmel,at91sam9
+
+      - items:
+          - enum:
               - atmel,at91sam9g15
               - atmel,at91sam9g25
               - atmel,at91sam9g35
@@ -52,11 +62,32 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D27 WLSOM1
+        items:
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D27 WLSOM1 Evaluation Kit
+        items:
+          - const: microchip,sama5d27-wlsom1-ek
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
       - items:
           - const: atmel,sama5d27
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: SAM9X60-EK board
+        items:
+          - const: microchip,sam9x60ek
+          - const: microchip,sam9x60
+          - const: atmel,at91sam9
+
       - description: Nattis v2 board with Natte v2 power board
         items:
           - const: axentia,nattis-2
diff --git a/dts/Bindings/arm/atmel-sysregs.txt b/dts/Bindings/arm/atmel-sysregs.txt
index 9fbde401a0..62cd4e8981 100644
--- a/dts/Bindings/arm/atmel-sysregs.txt
+++ b/dts/Bindings/arm/atmel-sysregs.txt
@@ -10,6 +10,12 @@ PIT Timer required properties:
 - interrupts: Should contain interrupt for the PIT which is the IRQ line
   shared across all System Controller members.
 
+PIT64B Timer required properties:
+- compatible: Should be "microchip,sam9x60-pit64b"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for PIT64B timer
+- clocks: Should contain the available clock sources for PIT64B timer.
+
 System Timer (ST) required properties:
 - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
 - reg: Should contain registers location and length
@@ -39,6 +45,7 @@ RAMC SDRAM/DDR Controller required properties:
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",
+			"microchip,sam9x60-ddramc"
 - reg: Should contain registers location and length
 
 Examples:
diff --git a/dts/Bindings/arm/cpus.yaml b/dts/Bindings/arm/cpus.yaml
index c23c24ff75..7a9c3ce2db 100644
--- a/dts/Bindings/arm/cpus.yaml
+++ b/dts/Bindings/arm/cpus.yaml
@@ -242,6 +242,21 @@ properties:
 
       where voltage is in V, frequency is in MHz.
 
+  power-domains:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    description:
+      List of phandles and PM domain specifiers, as defined by bindings of the
+      PM domain provider (see also ../power_domain.txt).
+
+  power-domain-names:
+    $ref: '/schemas/types.yaml#/definitions/string-array'
+    description:
+      A list of power domain name strings sorted in the same order as the
+      power-domains property.
+
+      For PSCI based platforms, the name corresponding to the index of the PSCI
+      PM domain provider, must be "psci".
+
   qcom,saw:
     $ref: '/schemas/types.yaml#/definitions/phandle'
     description: |
diff --git a/dts/Bindings/arm/fsl.yaml b/dts/Bindings/arm/fsl.yaml
index f79683a628..a8e0b4a813 100644
--- a/dts/Bindings/arm/fsl.yaml
+++ b/dts/Bindings/arm/fsl.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/arm/fsl.yaml#
+$id: http://devicetree.org/schemas/arm/fsl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Freescale i.MX Platforms Device Tree Bindings
@@ -128,6 +128,27 @@ properties:
               - variscite,dt6customboard
           - const: fsl,imx6q
 
+      - description: i.MX6Q Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6q-gw51xx
+              - gw,imx6q-gw52xx
+              - gw,imx6q-gw53xx
+              - gw,imx6q-gw5400-a
+              - gw,imx6q-gw54xx
+              - gw,imx6q-gw551x
+              - gw,imx6q-gw552x
+              - gw,imx6q-gw553x
+              - gw,imx6q-gw560x
+              - gw,imx6q-gw5903
+              - gw,imx6q-gw5904
+              - gw,imx6q-gw5907
+              - gw,imx6q-gw5910
+              - gw,imx6q-gw5912
+              - gw,imx6q-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6q
+
       - description: i.MX6QP based Boards
         items:
           - enum:
@@ -154,10 +175,31 @@ properties:
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
+      - description: i.MX6DL Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6dl-gw51xx
+              - gw,imx6dl-gw52xx
+              - gw,imx6dl-gw53xx
+              - gw,imx6dl-gw54xx
+              - gw,imx6dl-gw551x
+              - gw,imx6dl-gw552x
+              - gw,imx6dl-gw553x
+              - gw,imx6dl-gw560x
+              - gw,imx6dl-gw5903
+              - gw,imx6dl-gw5904
+              - gw,imx6dl-gw5907
+              - gw,imx6dl-gw5910
+              - gw,imx6dl-gw5912
+              - gw,imx6dl-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,tolino-shine3
           - const: fsl,imx6sl
 
       - description: i.MX6SLL based Boards
@@ -172,6 +214,7 @@ properties:
           - enum:
               - fsl,imx6sx-sabreauto      # i.MX6 SoloX Sabre Auto Board
               - fsl,imx6sx-sdb            # i.MX6 SoloX SDB Board
+              - fsl,imx6sx-sdb-reva       # i.MX6 SoloX SDB Rev-A Board
           - const: fsl,imx6sx
 
       - description: i.MX6UL based Boards
@@ -239,6 +282,7 @@ properties:
         items:
           - enum:
               - fsl,imx7d-sdb             # i.MX7 SabreSD Board
+              - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
               - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
               - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
@@ -263,6 +307,7 @@ properties:
       - description: i.MX7ULP based Boards
         items:
           - enum:
+              - ea,imx7ulp-com           # i.MX7ULP Embedded Artists COM Board
               - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
           - const: fsl,imx7ulp
 
@@ -283,7 +328,9 @@ properties:
         items:
           - enum:
               - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+              - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
+              - google,imx8mq-phanbell    # Google Coral Edge TPU
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
@@ -385,6 +432,13 @@ properties:
               - fsl,ls2088a-rdb
           - const: fsl,ls2088a
 
+      - description: LX2160A based Boards
+        items:
+          - enum:
+              - fsl,lx2160a-qds
+              - fsl,lx2160a-rdb
+          - const: fsl,lx2160a
+
       - description: S32V234 based Boards
         items:
           - enum:
diff --git a/dts/Bindings/arm/idle-states.txt b/dts/Bindings/arm/idle-states.txt
deleted file mode 100644
index 771f5d20ae..0000000000
--- a/dts/Bindings/arm/idle-states.txt
+++ /dev/null
@@ -1,706 +0,0 @@
-==========================================
-ARM idle states binding description
-==========================================
-
-==========================================
-1 - Introduction
-==========================================
-
-ARM systems contain HW capable of managing power consumption dynamically,
-where cores can be put in different low-power states (ranging from simple
-wfi to power gating) according to OS PM policies. The CPU states representing
-the range of dynamic idle states that a processor can enter at run-time, can be
-specified through device tree bindings representing the parameters required
-to enter/exit specific idle states on a given processor.
-
-According to the Server Base System Architecture document (SBSA, [3]), the
-power states an ARM CPU can be put into are identified by the following list:
-
-- Running
-- Idle_standby
-- Idle_retention
-- Sleep
-- Off
-
-The power states described in the SBSA document define the basic CPU states on
-top of which ARM platforms implement power management schemes that allow an OS
-PM implementation to put the processor in different idle states (which include
-states listed above; "off" state is not an idle state since it does not have
-wake-up capabilities, hence it is not considered in this document).
-
-Idle state parameters (e.g. entry latency) are platform specific and need to be
-characterized with bindings that provide the required information to OS PM
-code so that it can build the required tables and use them at runtime.
-
-The device tree binding definition for ARM idle states is the subject of this
-document.
-
-===========================================
-2 - idle-states definitions
-===========================================
-
-Idle states are characterized for a specific system through a set of
-timing and energy related properties, that underline the HW behaviour
-triggered upon idle states entry and exit.
-
-The following diagram depicts the CPU execution phases and related timing
-properties required to enter and exit an idle state:
-
-..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
-	    |          |           |          |          |
-
-	    |<------ entry ------->|
-	    |       latency        |
-					      |<- exit ->|
-					      |  latency |
-	    |<-------- min-residency -------->|
-		       |<-------  wakeup-latency ------->|
-
-		Diagram 1: CPU idle state execution phases
-
-EXEC:	Normal CPU execution.
-
-PREP:	Preparation phase before committing the hardware to idle mode
-	like cache flushing. This is abortable on pending wake-up
-	event conditions. The abort latency is assumed to be negligible
-	(i.e. less than the ENTRY + EXIT duration). If aborted, CPU
-	goes back to EXEC. This phase is optional. If not abortable,
-	this should be included in the ENTRY phase instead.
-
-ENTRY:	The hardware is committed to idle mode. This period must run
-	to completion up to IDLE before anything else can happen.
-
-IDLE:	This is the actual energy-saving idle period. This may last
-	between 0 and infinite time, until a wake-up event occurs.
-
-EXIT:	Period during which the CPU is brought back to operational
-	mode (EXEC).
-
-entry-latency: Worst case latency required to enter the idle state. The
-exit-latency may be guaranteed only after entry-latency has passed.
-
-min-residency: Minimum period, including preparation and entry, for a given
-idle state to be worthwhile energywise.
-
-wakeup-latency: Maximum delay between the signaling of a wake-up event and the
-CPU being able to execute normal code again. If not specified, this is assumed
-to be entry-latency + exit-latency.
-
-These timing parameters can be used by an OS in different circumstances.
-
-An idle CPU requires the expected min-residency time to select the most
-appropriate idle state based on the expected expiry time of the next IRQ
-(i.e. wake-up) that causes the CPU to return to the EXEC phase.
-
-An operating system scheduler may need to compute the shortest wake-up delay
-for CPUs in the system by detecting how long will it take to get a CPU out
-of an idle state, e.g.:
-
-wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
-
-In other words, the scheduler can make its scheduling decision by selecting
-(e.g. waking-up) the CPU with the shortest wake-up delay.
-The wake-up delay must take into account the entry latency if that period
-has not expired. The abortable nature of the PREP period can be ignored
-if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
-the worst case since it depends on the CPU operating conditions, i.e. caches
-state).
-
-An OS has to reliably probe the wakeup-latency since some devices can enforce
-latency constraint guarantees to work properly, so the OS has to detect the
-worst case wake-up latency it can incur if a CPU is allowed to enter an
-idle state, and possibly to prevent that to guarantee reliable device
-functioning.
-
-The min-residency time parameter deserves further explanation since it is
-expressed in time units but must factor in energy consumption coefficients.
-
-The energy consumption of a cpu when it enters a power state can be roughly
-characterised by the following graph:
-
-               |
-               |
-               |
-           e   |
-           n   |                                      /---
-           e   |                               /------
-           r   |                        /------
-           g   |                  /-----
-           y   |           /------
-               |       ----
-               |      /|
-               |     / |
-               |    /  |
-               |   /   |
-               |  /    |
-               | /     |
-               |/      |
-          -----|-------+----------------------------------
-              0|       1                              time(ms)
-
-		Graph 1: Energy vs time example
-
-The graph is split in two parts delimited by time 1ms on the X-axis.
-The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
-and denotes the energy costs incurred while entering and leaving the idle
-state.
-The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
-shallower slope and essentially represents the energy consumption of the idle
-state.
-
-min-residency is defined for a given idle state as the minimum expected
-residency time for a state (inclusive of preparation and entry) after
-which choosing that state become the most energy efficient option. A good
-way to visualise this, is by taking the same graph above and comparing some
-states energy consumptions plots.
-
-For sake of simplicity, let's consider a system with two idle states IDLE1,
-and IDLE2:
-
-          |
-          |
-          |
-          |                                                  /-- IDLE1
-       e  |                                              /---
-       n  |                                         /----
-       e  |                                     /---
-       r  |                                /-----/--------- IDLE2
-       g  |                    /-------/---------
-       y  |        ------------    /---|
-          |       /           /----    |
-          |      /        /---         |
-          |     /    /----             |
-          |    / /---                  |
-          |   ---                      |
-          |  /                         |
-          | /                          |
-          |/                           |                  time
-       ---/----------------------------+------------------------
-          |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
-                                       |
-                                IDLE2-min-residency
-
-		Graph 2: idle states min-residency example
-
-In graph 2 above, that takes into account idle states entry/exit energy
-costs, it is clear that if the idle state residency time (i.e. time till next
-wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
-choice energywise.
-
-This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
-than IDLE2.
-
-However, the lower power consumption (i.e. shallower energy curve slope) of
-idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
-efficient.
-
-The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
-shallower states in a system with multiple idle states) is defined
-IDLE2-min-residency and corresponds to the time when energy consumption of
-IDLE1 and IDLE2 states breaks even.
-
-The definitions provided in this section underpin the idle states
-properties specification that is the subject of the following sections.
-
-===========================================
-3 - idle-states node
-===========================================
-
-ARM processor idle states are defined within the idle-states node, which is
-a direct child of the cpus node [1] and provides a container where the
-processor idle states, defined as device tree nodes, are listed.
-
-- idle-states node
-
-	Usage: Optional - On ARM systems, it is a container of processor idle
-			  states nodes. If the system does not provide CPU
-			  power management capabilities, or the processor just
-			  supports idle_standby, an idle-states node is not
-			  required.
-
-	Description: idle-states node is a container node, where its
-		     subnodes describe the CPU idle states.
-
-	Node name must be "idle-states".
-
-	The idle-states node's parent node must be the cpus node.
-
-	The idle-states node's child nodes can be:
-
-	- one or more state nodes
-
-	Any other configuration is considered invalid.
-
-	An idle-states node defines the following properties:
-
-	- entry-method
-		Value type: <stringlist>
-		Usage and definition depend on ARM architecture version.
-			# On ARM v8 64-bit this property is required and must
-			  be:
-			   - "psci"
-			# On ARM 32-bit systems this property is optional
-
-This assumes that the "enable-method" property is set to "psci" in the cpu
-node[6] that is responsible for setting up CPU idle management in the OS
-implementation.
-
-The nodes describing the idle states (state) can only be defined
-within the idle-states node, any other configuration is considered invalid
-and therefore must be ignored.
-
-===========================================
-4 - state node
-===========================================
-
-A state node represents an idle state description and must be defined as
-follows:
-
-- state node
-
-	Description: must be child of the idle-states node
-
-	The state node name shall follow standard device tree naming
-	rules ([5], 2.2.1 "Node names"), in particular state nodes which
-	are siblings within a single common parent must be given a unique name.
-
-	The idle state entered by executing the wfi instruction (idle_standby
-	SBSA,[3][4]) is considered standard on all ARM platforms and therefore
-	must not be listed.
-
-	With the definitions provided above, the following list represents
-	the valid properties for a state node:
-
-	- compatible
-		Usage: Required
-		Value type: <stringlist>
-		Definition: Must be "arm,idle-state".
-
-	- local-timer-stop
-		Usage: See definition
-		Value type: <none>
-		Definition: if present the CPU local timer control logic is
-			    lost on state entry, otherwise it is retained.
-
-	- entry-latency-us
-		Usage: Required
-		Value type: <prop-encoded-array>
-		Definition: u32 value representing worst case latency in
-			    microseconds required to enter the idle state.
-
-	- exit-latency-us
-		Usage: Required
-		Value type: <prop-encoded-array>
-		Definition: u32 value representing worst case latency
-			    in microseconds required to exit the idle state.
-			    The exit-latency-us duration may be guaranteed
-			    only after entry-latency-us has passed.
-
-	- min-residency-us
-		Usage: Required
-		Value type: <prop-encoded-array>
-		Definition: u32 value representing minimum residency duration
-			    in microseconds, inclusive of preparation and
-			    entry, for this idle state to be considered
-			    worthwhile energy wise (refer to section 2 of
-			    this document for a complete description).
-
-	- wakeup-latency-us:
-		Usage: Optional
-		Value type: <prop-encoded-array>
-		Definition: u32 value representing maximum delay between the
-			    signaling of a wake-up event and the CPU being
-			    able to execute normal code again. If omitted,
-			    this is assumed to be equal to:
-
-				entry-latency-us + exit-latency-us
-
-			    It is important to supply this value on systems
-			    where the duration of PREP phase (see diagram 1,
-			    section 2) is non-neglibigle.
-			    In such systems entry-latency-us + exit-latency-us
-			    will exceed wakeup-latency-us by this duration.
-
-	- status:
-		Usage: Optional
-		Value type: <string>
-		Definition: A standard device tree property [5] that indicates
-			    the operational status of an idle-state.
-			    If present, it shall be:
-			    "okay": to indicate that the idle state is
-				    operational.
-			    "disabled": to indicate that the idle state has
-					been disabled in firmware so it is not
-					operational.
-			    If the property is not present the idle-state must
-			    be considered operational.
-
-	- idle-state-name:
-		Usage: Optional
-		Value type: <string>
-		Definition: A string used as a descriptive name for the idle
-			    state.
-
-	In addition to the properties listed above, a state node may require
-	additional properties specific to the entry-method defined in the
-	idle-states node. Please refer to the entry-method bindings
-	documentation for properties definitions.
-
-===========================================
-4 - Examples
-===========================================
-
-Example 1 (ARM 64-bit, 16-cpu system, PSCI enable-method):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <2>;
-
-	CPU0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x0>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x1>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU4: cpu@10000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU5: cpu@10001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU6: cpu@10100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU7: cpu@10101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x0 0x10101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU8: cpu@100000000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x0>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU9: cpu@100000001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x1>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU10: cpu@100000100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU11: cpu@100000101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU12: cpu@100010000 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x10000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU13: cpu@100010001 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x10001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU14: cpu@100010100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x10100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU15: cpu@100010101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x1 0x10101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-	};
-
-	idle-states {
-		entry-method = "psci";
-
-		CPU_RETENTION_0_0: cpu-retention-0-0 {
-			compatible = "arm,idle-state";
-			arm,psci-suspend-param = <0x0010000>;
-			entry-latency-us = <20>;
-			exit-latency-us = <40>;
-			min-residency-us = <80>;
-		};
-
-		CLUSTER_RETENTION_0: cluster-retention-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			arm,psci-suspend-param = <0x1010000>;
-			entry-latency-us = <50>;
-			exit-latency-us = <100>;
-			min-residency-us = <250>;
-			wakeup-latency-us = <130>;
-		};
-
-		CPU_SLEEP_0_0: cpu-sleep-0-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			arm,psci-suspend-param = <0x0010000>;
-			entry-latency-us = <250>;
-			exit-latency-us = <500>;
-			min-residency-us = <950>;
-		};
-
-		CLUSTER_SLEEP_0: cluster-sleep-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			arm,psci-suspend-param = <0x1010000>;
-			entry-latency-us = <600>;
-			exit-latency-us = <1100>;
-			min-residency-us = <2700>;
-			wakeup-latency-us = <1500>;
-		};
-
-		CPU_RETENTION_1_0: cpu-retention-1-0 {
-			compatible = "arm,idle-state";
-			arm,psci-suspend-param = <0x0010000>;
-			entry-latency-us = <20>;
-			exit-latency-us = <40>;
-			min-residency-us = <90>;
-		};
-
-		CLUSTER_RETENTION_1: cluster-retention-1 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			arm,psci-suspend-param = <0x1010000>;
-			entry-latency-us = <50>;
-			exit-latency-us = <100>;
-			min-residency-us = <270>;
-			wakeup-latency-us = <100>;
-		};
-
-		CPU_SLEEP_1_0: cpu-sleep-1-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			arm,psci-suspend-param = <0x0010000>;
-			entry-latency-us = <70>;
-			exit-latency-us = <100>;
-			min-residency-us = <300>;
-			wakeup-latency-us = <150>;
-		};
-
-		CLUSTER_SLEEP_1: cluster-sleep-1 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			arm,psci-suspend-param = <0x1010000>;
-			entry-latency-us = <500>;
-			exit-latency-us = <1200>;
-			min-residency-us = <3500>;
-			wakeup-latency-us = <1300>;
-		};
-	};
-
-};
-
-Example 2 (ARM 32-bit, 8-cpu system, two clusters):
-
-cpus {
-	#size-cells = <0>;
-	#address-cells = <1>;
-
-	CPU0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x0>;
-		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x1>;
-		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU2: cpu@2 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x2>;
-		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU3: cpu@3 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a15";
-		reg = <0x3>;
-		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
-	};
-
-	CPU4: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x100>;
-		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU5: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x101>;
-		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU6: cpu@102 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x102>;
-		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
-	};
-
-	CPU7: cpu@103 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x103>;
-		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
-	};
-
-	idle-states {
-		CPU_SLEEP_0_0: cpu-sleep-0-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			entry-latency-us = <200>;
-			exit-latency-us = <100>;
-			min-residency-us = <400>;
-			wakeup-latency-us = <250>;
-		};
-
-		CLUSTER_SLEEP_0: cluster-sleep-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			entry-latency-us = <500>;
-			exit-latency-us = <1500>;
-			min-residency-us = <2500>;
-			wakeup-latency-us = <1700>;
-		};
-
-		CPU_SLEEP_1_0: cpu-sleep-1-0 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			entry-latency-us = <300>;
-			exit-latency-us = <500>;
-			min-residency-us = <900>;
-			wakeup-latency-us = <600>;
-		};
-
-		CLUSTER_SLEEP_1: cluster-sleep-1 {
-			compatible = "arm,idle-state";
-			local-timer-stop;
-			entry-latency-us = <800>;
-			exit-latency-us = <2000>;
-			min-residency-us = <6500>;
-			wakeup-latency-us = <2300>;
-		};
-	};
-
-};
-
-===========================================
-5 - References
-===========================================
-
-[1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.yaml
-
-[2] ARM Linux Kernel documentation - PSCI bindings
-    Documentation/devicetree/bindings/arm/psci.yaml
-
-[3] ARM Server Base System Architecture (SBSA)
-    http://infocenter.arm.com/help/index.jsp
-
-[4] ARM Architecture Reference Manuals
-    http://infocenter.arm.com/help/index.jsp
-
-[5] Devicetree Specification
-    https://www.devicetree.org/specifications/
-
-[6] ARM Linux Kernel documentation - Booting AArch64 Linux
-    Documentation/arm64/booting.rst
diff --git a/dts/Bindings/arm/idle-states.yaml b/dts/Bindings/arm/idle-states.yaml
new file mode 100644
index 0000000000..ea805c1e6b
--- /dev/null
+++ b/dts/Bindings/arm/idle-states.yaml
@@ -0,0 +1,661 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/idle-states.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM idle states binding description
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: |+
+  ==========================================
+  1 - Introduction
+  ==========================================
+
+  ARM systems contain HW capable of managing power consumption dynamically,
+  where cores can be put in different low-power states (ranging from simple wfi
+  to power gating) according to OS PM policies. The CPU states representing the
+  range of dynamic idle states that a processor can enter at run-time, can be
+  specified through device tree bindings representing the parameters required to
+  enter/exit specific idle states on a given processor.
+
+  According to the Server Base System Architecture document (SBSA, [3]), the
+  power states an ARM CPU can be put into are identified by the following list:
+
+  - Running
+  - Idle_standby
+  - Idle_retention
+  - Sleep
+  - Off
+
+  The power states described in the SBSA document define the basic CPU states on
+  top of which ARM platforms implement power management schemes that allow an OS
+  PM implementation to put the processor in different idle states (which include
+  states listed above; "off" state is not an idle state since it does not have
+  wake-up capabilities, hence it is not considered in this document).
+
+  Idle state parameters (e.g. entry latency) are platform specific and need to
+  be characterized with bindings that provide the required information to OS PM
+  code so that it can build the required tables and use them at runtime.
+
+  The device tree binding definition for ARM idle states is the subject of this
+  document.
+
+  ===========================================
+  2 - idle-states definitions
+  ===========================================
+
+  Idle states are characterized for a specific system through a set of
+  timing and energy related properties, that underline the HW behaviour
+  triggered upon idle states entry and exit.
+
+  The following diagram depicts the CPU execution phases and related timing
+  properties required to enter and exit an idle state:
+
+  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
+              |          |           |          |          |
+
+              |<------ entry ------->|
+              |       latency        |
+                                                |<- exit ->|
+                                                |  latency |
+              |<-------- min-residency -------->|
+                         |<-------  wakeup-latency ------->|
+
+      Diagram 1: CPU idle state execution phases
+
+  EXEC:  Normal CPU execution.
+
+  PREP:  Preparation phase before committing the hardware to idle mode
+    like cache flushing. This is abortable on pending wake-up
+    event conditions. The abort latency is assumed to be negligible
+    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
+    goes back to EXEC. This phase is optional. If not abortable,
+    this should be included in the ENTRY phase instead.
+
+  ENTRY:  The hardware is committed to idle mode. This period must run
+    to completion up to IDLE before anything else can happen.
+
+  IDLE:  This is the actual energy-saving idle period. This may last
+    between 0 and infinite time, until a wake-up event occurs.
+
+  EXIT:  Period during which the CPU is brought back to operational
+    mode (EXEC).
+
+  entry-latency: Worst case latency required to enter the idle state. The
+  exit-latency may be guaranteed only after entry-latency has passed.
+
+  min-residency: Minimum period, including preparation and entry, for a given
+  idle state to be worthwhile energywise.
+
+  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
+  CPU being able to execute normal code again. If not specified, this is assumed
+  to be entry-latency + exit-latency.
+
+  These timing parameters can be used by an OS in different circumstances.
+
+  An idle CPU requires the expected min-residency time to select the most
+  appropriate idle state based on the expected expiry time of the next IRQ
+  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
+
+  An operating system scheduler may need to compute the shortest wake-up delay
+  for CPUs in the system by detecting how long will it take to get a CPU out
+  of an idle state, e.g.:
+
+  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
+
+  In other words, the scheduler can make its scheduling decision by selecting
+  (e.g. waking-up) the CPU with the shortest wake-up delay.
+  The wake-up delay must take into account the entry latency if that period
+  has not expired. The abortable nature of the PREP period can be ignored
+  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
+  the worst case since it depends on the CPU operating conditions, i.e. caches
+  state).
+
+  An OS has to reliably probe the wakeup-latency since some devices can enforce
+  latency constraint guarantees to work properly, so the OS has to detect the
+  worst case wake-up latency it can incur if a CPU is allowed to enter an
+  idle state, and possibly to prevent that to guarantee reliable device
+  functioning.
+
+  The min-residency time parameter deserves further explanation since it is
+  expressed in time units but must factor in energy consumption coefficients.
+
+  The energy consumption of a cpu when it enters a power state can be roughly
+  characterised by the following graph:
+
+                 |
+                 |
+                 |
+             e   |
+             n   |                                      /---
+             e   |                               /------
+             r   |                        /------
+             g   |                  /-----
+             y   |           /------
+                 |       ----
+                 |      /|
+                 |     / |
+                 |    /  |
+                 |   /   |
+                 |  /    |
+                 | /     |
+                 |/      |
+            -----|-------+----------------------------------
+                0|       1                              time(ms)
+
+      Graph 1: Energy vs time example
+
+  The graph is split in two parts delimited by time 1ms on the X-axis.
+  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
+  and denotes the energy costs incurred while entering and leaving the idle
+  state.
+  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
+  shallower slope and essentially represents the energy consumption of the idle
+  state.
+
+  min-residency is defined for a given idle state as the minimum expected
+  residency time for a state (inclusive of preparation and entry) after
+  which choosing that state become the most energy efficient option. A good
+  way to visualise this, is by taking the same graph above and comparing some
+  states energy consumptions plots.
+
+  For sake of simplicity, let's consider a system with two idle states IDLE1,
+  and IDLE2:
+
+            |
+            |
+            |
+            |                                                  /-- IDLE1
+         e  |                                              /---
+         n  |                                         /----
+         e  |                                     /---
+         r  |                                /-----/--------- IDLE2
+         g  |                    /-------/---------
+         y  |        ------------    /---|
+            |       /           /----    |
+            |      /        /---         |
+            |     /    /----             |
+            |    / /---                  |
+            |   ---                      |
+            |  /                         |
+            | /                          |
+            |/                           |                  time
+         ---/----------------------------+------------------------
+            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
+                                         |
+                                  IDLE2-min-residency
+
+      Graph 2: idle states min-residency example
+
+  In graph 2 above, that takes into account idle states entry/exit energy
+  costs, it is clear that if the idle state residency time (i.e. time till next
+  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
+  choice energywise.
+
+  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
+  than IDLE2.
+
+  However, the lower power consumption (i.e. shallower energy curve slope) of
+  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
+  efficient.
+
+  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
+  shallower states in a system with multiple idle states) is defined
+  IDLE2-min-residency and corresponds to the time when energy consumption of
+  IDLE1 and IDLE2 states breaks even.
+
+  The definitions provided in this section underpin the idle states
+  properties specification that is the subject of the following sections.
+
+  ===========================================
+  3 - idle-states node
+  ===========================================
+
+  ARM processor idle states are defined within the idle-states node, which is
+  a direct child of the cpus node [1] and provides a container where the
+  processor idle states, defined as device tree nodes, are listed.
+
+  On ARM systems, it is a container of processor idle states nodes. If the
+  system does not provide CPU power management capabilities, or the processor
+  just supports idle_standby, an idle-states node is not required.
+
+  ===========================================
+  4 - References
+  ===========================================
+
+  [1] ARM Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/arm/cpus.yaml
+
+  [2] ARM Linux Kernel documentation - PSCI bindings
+      Documentation/devicetree/bindings/arm/psci.yaml
+
+  [3] ARM Server Base System Architecture (SBSA)
+      http://infocenter.arm.com/help/index.jsp
+
+  [4] ARM Architecture Reference Manuals
+      http://infocenter.arm.com/help/index.jsp
+
+  [6] ARM Linux Kernel documentation - Booting AArch64 Linux
+      Documentation/arm64/booting.rst
+
+properties:
+  $nodename:
+    const: idle-states
+
+  entry-method:
+    description: |
+      Usage and definition depend on ARM architecture version.
+
+      On ARM v8 64-bit this property is required.
+      On ARM 32-bit systems this property is optional
+
+      This assumes that the "enable-method" property is set to "psci" in the cpu
+      node[6] that is responsible for setting up CPU idle management in the OS
+      implementation.
+    const: psci
+
+patternProperties:
+  "^(cpu|cluster)-":
+    type: object
+    description: |
+      Each state node represents an idle state description and must be defined
+      as follows.
+
+      The idle state entered by executing the wfi instruction (idle_standby
+      SBSA,[3][4]) is considered standard on all ARM platforms and therefore
+      must not be listed.
+
+      In addition to the properties listed above, a state node may require
+      additional properties specific to the entry-method defined in the
+      idle-states node. Please refer to the entry-method bindings
+      documentation for properties definitions.
+
+    properties:
+      compatible:
+        const: arm,idle-state
+
+      local-timer-stop:
+        description:
+          If present the CPU local timer control logic is
+             lost on state entry, otherwise it is retained.
+        type: boolean
+
+      entry-latency-us:
+        description:
+          Worst case latency in microseconds required to enter the idle state.
+
+      exit-latency-us:
+        description:
+          Worst case latency in microseconds required to exit the idle state.
+          The exit-latency-us duration may be guaranteed only after
+          entry-latency-us has passed.
+
+      min-residency-us:
+        description:
+          Minimum residency duration in microseconds, inclusive of preparation
+          and entry, for this idle state to be considered worthwhile energy wise
+          (refer to section 2 of this document for a complete description).
+
+      wakeup-latency-us:
+        description: |
+          Maximum delay between the signaling of a wake-up event and the CPU
+          being able to execute normal code again. If omitted, this is assumed
+          to be equal to:
+
+            entry-latency-us + exit-latency-us
+
+          It is important to supply this value on systems where the duration of
+          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
+          systems entry-latency-us + exit-latency-us will exceed
+          wakeup-latency-us by this duration.
+
+      idle-state-name:
+        $ref: /schemas/types.yaml#definitions/string
+        description:
+          A string used as a descriptive name for the idle state.
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+additionalProperties: false
+
+examples:
+  - |
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <2>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100000000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+        };
+
+        idle-states {
+            entry-method = "psci";
+
+            CPU_RETENTION_0_0: cpu-retention-0-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CLUSTER_RETENTION_0: cluster-retention-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CPU_SLEEP_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_SLEEP_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RETENTION_1_0: cpu-retention-1-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <90>;
+            };
+
+            CLUSTER_RETENTION_1: cluster-retention-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <270>;
+                wakeup-latency-us = <100>;
+            };
+
+            CPU_SLEEP_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <70>;
+                exit-latency-us = <100>;
+                min-residency-us = <300>;
+                wakeup-latency-us = <150>;
+            };
+
+            CLUSTER_SLEEP_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <500>;
+                exit-latency-us = <1200>;
+                min-residency-us = <3500>;
+                wakeup-latency-us = <1300>;
+            };
+        };
+    };
+
+  - |
+    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x0>;
+            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x1>;
+            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+        };
+
+        cpu@2 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x2>;
+            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+        };
+
+        cpu@3 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x3>;
+            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x100>;
+            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x101>;
+            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+        };
+
+        cpu@102 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x102>;
+            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+        };
+
+        cpu@103 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x103>;
+            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+        };
+
+        idle-states {
+            cpu_sleep_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <200>;
+                exit-latency-us = <100>;
+                min-residency-us = <400>;
+                wakeup-latency-us = <250>;
+            };
+
+            cluster_sleep_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <500>;
+                exit-latency-us = <1500>;
+                min-residency-us = <2500>;
+                wakeup-latency-us = <1700>;
+            };
+
+            cpu_sleep_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <300>;
+                exit-latency-us = <500>;
+                min-residency-us = <900>;
+                wakeup-latency-us = <600>;
+            };
+
+            cluster_sleep_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <800>;
+                exit-latency-us = <2000>;
+                min-residency-us = <6500>;
+                wakeup-latency-us = <2300>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/arm/msm/qcom,llcc.yaml b/dts/Bindings/arm/msm/qcom,llcc.yaml
index 558749065b..79902f470e 100644
--- a/dts/Bindings/arm/msm/qcom,llcc.yaml
+++ b/dts/Bindings/arm/msm/qcom,llcc.yaml
@@ -47,7 +47,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    cache-controller@1100000 {
+    system-cache-controller@1100000 {
       compatible = "qcom,sdm845-llcc";
       reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
       reg-names = "llcc_base", "llcc_broadcast_base";
diff --git a/dts/Bindings/arm/psci.yaml b/dts/Bindings/arm/psci.yaml
index 7abdf58b33..8ef85420b2 100644
--- a/dts/Bindings/arm/psci.yaml
+++ b/dts/Bindings/arm/psci.yaml
@@ -102,6 +102,34 @@ properties:
       [1] Kernel documentation - ARM idle states bindings
         Documentation/devicetree/bindings/arm/idle-states.txt
 
+  "#power-domain-cells":
+    description:
+      The number of cells in a PM domain specifier as per binding in [3].
+      Must be 0 as to represent a single PM domain.
+
+      ARM systems can have multiple cores, sometimes in an hierarchical
+      arrangement. This often, but not always, maps directly to the processor
+      power topology of the system. Individual nodes in a topology have their
+      own specific power states and can be better represented hierarchically.
+
+      For these cases, the definitions of the idle states for the CPUs and the
+      CPU topology, must conform to the binding in [3]. The idle states
+      themselves must conform to the binding in [4] and must specify the
+      arm,psci-suspend-param property.
+
+      It should also be noted that, in PSCI firmware v1.0 the OS-Initiated
+      (OSI) CPU suspend mode is introduced. Using a hierarchical representation
+      helps to implement support for OSI mode and OS implementations may choose
+      to mandate it.
+
+      [3] Documentation/devicetree/bindings/power/power_domain.txt
+      [4] Documentation/devicetree/bindings/power/domain-idle-state.txt
+
+  power-domains:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    description:
+      List of phandles and PM domain specifiers, as defined by bindings of the
+      PM domain provider.
 
 required:
   - compatible
@@ -160,4 +188,80 @@ examples:
       cpu_on = <0x95c10002>;
       cpu_off = <0x95c10001>;
     };
+
+  - |+
+
+    // Case 4: CPUs and CPU idle states described using the hierarchical model.
+
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a53", "arm,armv8";
+        reg = <0x0>;
+        enable-method = "psci";
+        power-domains = <&CPU_PD0>;
+        power-domain-names = "psci";
+      };
+
+      CPU1: cpu@1 {
+        device_type = "cpu";
+        compatible = "arm,cortex-a57", "arm,armv8";
+        reg = <0x100>;
+        enable-method = "psci";
+        power-domains = <&CPU_PD1>;
+        power-domain-names = "psci";
+      };
+
+      idle-states {
+
+        CPU_PWRDN: cpu-power-down {
+          compatible = "arm,idle-state";
+          arm,psci-suspend-param = <0x0000001>;
+          entry-latency-us = <10>;
+          exit-latency-us = <10>;
+          min-residency-us = <100>;
+        };
+
+        CLUSTER_RET: cluster-retention {
+          compatible = "domain-idle-state";
+          arm,psci-suspend-param = <0x1000011>;
+          entry-latency-us = <500>;
+          exit-latency-us = <500>;
+          min-residency-us = <2000>;
+        };
+
+        CLUSTER_PWRDN: cluster-power-down {
+          compatible = "domain-idle-state";
+          arm,psci-suspend-param = <0x1000031>;
+          entry-latency-us = <2000>;
+          exit-latency-us = <2000>;
+          min-residency-us = <6000>;
+        };
+      };
+    };
+
+    psci {
+      compatible = "arm,psci-1.0";
+      method = "smc";
+
+      CPU_PD0: cpu-pd0 {
+        #power-domain-cells = <0>;
+        domain-idle-states = <&CPU_PWRDN>;
+        power-domains = <&CLUSTER_PD>;
+      };
+
+      CPU_PD1: cpu-pd1 {
+        #power-domain-cells = <0>;
+        domain-idle-states =  <&CPU_PWRDN>;
+        power-domains = <&CLUSTER_PD>;
+      };
+
+      CLUSTER_PD: cluster-pd {
+        #power-domain-cells = <0>;
+        domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+      };
+    };
 ...
diff --git a/dts/Bindings/arm/qcom.yaml b/dts/Bindings/arm/qcom.yaml
index e39d8f02e3..5976c0b16b 100644
--- a/dts/Bindings/arm/qcom.yaml
+++ b/dts/Bindings/arm/qcom.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/arm/qcom.yaml#
+$id: http://devicetree.org/schemas/arm/qcom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: QCOM device tree bindings
@@ -24,28 +24,30 @@ description: |
 
   The 'SoC' element must be one of the following strings:
 
-  	apq8016
-  	apq8074
-  	apq8084
-  	apq8096
-  	msm8916
-  	msm8974
-  	msm8992
-  	msm8994
-  	msm8996
-  	mdm9615
-  	ipq8074
-  	sdm845
+        apq8016
+        apq8074
+        apq8084
+        apq8096
+        ipq8074
+        mdm9615
+        msm8916
+        msm8974
+        msm8992
+        msm8994
+        msm8996
+        sc7180
+        sdm845
 
   The 'board' element must be one of the following strings:
 
-  	cdp
-  	liquid
-  	dragonboard
-  	mtp
-  	sbc
-  	hk01
-  	qrd
+        cdp
+        dragonboard
+        hk01
+        idp
+        liquid
+        mtp
+        qrd
+        sbc
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -144,4 +146,8 @@ properties:
               - qcom,ipq8074-hk01
           - const: qcom,ipq8074
 
+      - items:
+          - enum:
+              - qcom,sc7180-idp
+          - const: qcom,sc7180
 ...
diff --git a/dts/Bindings/arm/rockchip.yaml b/dts/Bindings/arm/rockchip.yaml
index d9847b306b..874b0eaa2a 100644
--- a/dts/Bindings/arm/rockchip.yaml
+++ b/dts/Bindings/arm/rockchip.yaml
@@ -409,6 +409,9 @@ properties:
 
       - description: Pine64 RockPro64
         items:
+          - enum:
+              - pine64,rockpro64-v2.1
+              - pine64,rockpro64-v2.0
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
@@ -422,6 +425,12 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK Pi N10
+        items:
+          - const: radxa,rockpi-n10
+          - const: vamrs,rk3399pro-vmarc-som
+          - const: rockchip,rk3399pro
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square
diff --git a/dts/Bindings/arm/sprd.yaml b/dts/Bindings/arm/sprd/sprd.yaml
index c35fb845cc..0258a96bfb 100644
--- a/dts/Bindings/arm/sprd.yaml
+++ b/dts/Bindings/arm/sprd/sprd.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Unisoc Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/sprd.yaml#
+$id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Unisoc platforms device tree bindings
diff --git a/dts/Bindings/arm/stm32/mlahb.txt b/dts/Bindings/arm/stm32/mlahb.txt
deleted file mode 100644
index 25307aa1eb..0000000000
--- a/dts/Bindings/arm/stm32/mlahb.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-ML-AHB interconnect bindings
-
-These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
-a Cortex-M subsystem with dedicated memories.
-The MCU SRAM and RETRAM memory parts can be accessed through different addresses
-(see "RAM aliases" in [1]) using different buses (see [2]) : balancing the
-Cortex-M firmware accesses among those ports allows to tune the system
-performance.
-
-[1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf
-[2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
-
-Required properties:
-- compatible: should be "simple-bus"
-- dma-ranges: describes memory addresses translation between the local CPU and
-	   the remote Cortex-M processor. Each memory region, is declared with
-	   3 parameters:
-		 - param 1: device base address (Cortex-M processor address)
-		 - param 2: physical base address (local CPU address)
-		 - param 3: size of the memory region.
-
-The Cortex-M remote processor accessed via the mlahb interconnect is described
-by a child node.
-
-Example:
-mlahb {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	dma-ranges = <0x00000000 0x38000000 0x10000>,
-		     <0x10000000 0x10000000 0x60000>,
-		     <0x30000000 0x30000000 0x60000>;
-
-	m4_rproc: m4@10000000 {
-		...
-	};
-};
diff --git a/dts/Bindings/arm/stm32/st,mlahb.yaml b/dts/Bindings/arm/stm32/st,mlahb.yaml
new file mode 100644
index 0000000000..68917bb7c7
--- /dev/null
+++ b/dts/Bindings/arm/stm32/st,mlahb.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 ML-AHB interconnect bindings
+
+maintainers:
+  - Fabien Dessenne <fabien.dessenne@st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+description: |
+  These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
+  a Cortex-M subsystem with dedicated memories. The MCU SRAM and RETRAM memory
+  parts can be accessed through different addresses (see "RAM aliases" in [1])
+  using different buses (see [2]): balancing the Cortex-M firmware accesses
+  among those ports allows to tune the system performance.
+  [1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf
+  [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+  compatible:
+    contains:
+      enum:
+        - st,mlahb
+
+  dma-ranges:
+    description: |
+      Describe memory addresses translation between the local CPU and the
+      remote Cortex-M processor. Each memory region, is declared with
+      3 parameters:
+      - param 1: device base address (Cortex-M processor address)
+      - param 2: physical base address (local CPU address)
+      - param 3: size of the memory region.
+    maxItems: 3
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - dma-ranges
+
+examples:
+  - |
+    mlahb: ahb {
+      compatible = "st,mlahb", "simple-bus";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      reg = <0x10000000 0x40000>;
+      ranges;
+      dma-ranges = <0x00000000 0x38000000 0x10000>,
+                   <0x10000000 0x10000000 0x60000>,
+                   <0x30000000 0x30000000 0x60000>;
+
+      m4_rproc: m4@10000000 {
+       reg = <0x10000000 0x40000>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/arm/stm32/st,stm32-syscon.yaml b/dts/Bindings/arm/stm32/st,stm32-syscon.yaml
new file mode 100644
index 0000000000..0dedf94c85
--- /dev/null
+++ b/dts/Bindings/arm/stm32/st,stm32-syscon.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: STMicroelectronics STM32 Platforms System Controller bindings
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Christophe Roullier <christophe.roullier@st.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - st,stm32mp157-syscfg
+        - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    syscfg: syscon@50020000 {
+        compatible = "st,stm32mp157-syscfg", "syscon";
+        reg = <0x50020000 0x400>;
+        clocks = <&rcc SYSCFG>;
+    };
+
+...
diff --git a/dts/Bindings/arm/stm32/stm32-syscon.txt b/dts/Bindings/arm/stm32/stm32-syscon.txt
deleted file mode 100644
index c92d411fd0..0000000000
--- a/dts/Bindings/arm/stm32/stm32-syscon.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-STMicroelectronics STM32 Platforms System Controller
-
-Properties:
-   - compatible : should contain two values. First value must be :
-                 - " st,stm32mp157-syscfg " - for stm32mp157 based SoCs,
-                 second value must be always "syscon".
-   - reg : offset and length of the register set.
-   - clocks: phandle to the syscfg clock
-
- Example:
-         syscfg: syscon@50020000 {
-                 compatible = "st,stm32mp157-syscfg", "syscon";
-                 reg = <0x50020000 0x400>;
-                 clocks = <&rcc SYSCFG>;
-         };
-
diff --git a/dts/Bindings/arm/sunxi.yaml b/dts/Bindings/arm/sunxi.yaml
index cffe8bb0ba..327ce67308 100644
--- a/dts/Bindings/arm/sunxi.yaml
+++ b/dts/Bindings/arm/sunxi.yaml
@@ -342,6 +342,16 @@ properties:
           - const: libretech,all-h3-cc-h5
           - const: allwinner,sun50i-h5
 
+      - description: Libre Computer Board ALL-H3-IT H5
+        items:
+          - const: libretech,all-h3-it-h5
+          - const: allwinner,sun50i-h5
+
+      - description: Libre Computer Board ALL-H5-CC H5
+        items:
+          - const: libretech,all-h5-cc-h5
+          - const: allwinner,sun50i-h5
+
       - description: Lichee Pi One
         items:
           - const: licheepi,licheepi-one
@@ -470,6 +480,12 @@ properties:
           - const: emlid,neutis-n5
           - const: allwinner,sun50i-h5
 
+      - description: Emlid Neutis N5H3 Developper Board
+        items:
+          - const: emlid,neutis-n5h3-devboard
+          - const: emlid,neutis-n5h3
+          - const: allwinner,sun8i-h3
+
       - description: NextThing Co. CHIP
         items:
           - const: nextthing,chip
@@ -599,11 +615,16 @@ properties:
           - const: pine64,pine64-plus
           - const: allwinner,sun50i-a64
 
-      - description: Pine64 PineH64
+      - description: Pine64 PineH64 model A
         items:
           - const: pine64,pine-h64
           - const: allwinner,sun50i-h6
 
+      - description: Pine64 PineH64 model B
+        items:
+          - const: pine64,pine-h64-model-b
+          - const: allwinner,sun50i-h6
+
       - description: Pine64 LTS
         items:
           - const: pine64,pine64-lts
diff --git a/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
new file mode 100644
index 0000000000..9370e64992
--- /dev/null
+++ b/dts/Bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun4i-a10-mbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Memory Bus (MBUS) controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The MBUS controller drives the MBUS that other devices in the SoC
+  will use to perform DMA. It also has a register interface that
+  allows to monitor and control the bandwidth and priorities for
+  masters on that bus.
+
+  Each device having to perform their DMA through the MBUS must have
+  the interconnects and interconnect-names properties set to the MBUS
+  controller and with "dma-mem" as the interconnect name.
+
+properties:
+  "#interconnect-cells":
+    const: 1
+    description:
+      The content of the cell is the MBUS ID.
+
+  compatible:
+    enum:
+      - allwinner,sun5i-a13-mbus
+      - allwinner,sun8i-h3-mbus
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-ranges:
+    description:
+      See section 2.3.9 of the DeviceTree Specification.
+
+required:
+  - "#interconnect-cells"
+  - compatible
+  - reg
+  - clocks
+  - dma-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun5i-ccu.h>
+
+    mbus: dram-controller@1c01000 {
+        compatible = "allwinner,sun5i-a13-mbus";
+        reg = <0x01c01000 0x1000>;
+        clocks = <&ccu CLK_MBUS>;
+        dma-ranges = <0x00000000 0x40000000 0x20000000>;
+        #interconnect-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/arm/sunxi/sunxi-mbus.txt b/dts/Bindings/arm/sunxi/sunxi-mbus.txt
deleted file mode 100644
index 2005bb4867..0000000000
--- a/dts/Bindings/arm/sunxi/sunxi-mbus.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Allwinner Memory Bus (MBUS) controller
-
-The MBUS controller drives the MBUS that other devices in the SoC will
-use to perform DMA. It also has a register interface that allows to
-monitor and control the bandwidth and priorities for masters on that
-bus.
-
-Required properties:
- - compatible: Must be one of:
-	- allwinner,sun5i-a13-mbus
-	- allwinner,sun8i-h3-mbus
- - reg: Offset and length of the register set for the controller
- - clocks: phandle to the clock driving the controller
- - dma-ranges: See section 2.3.9 of the DeviceTree Specification
- - #interconnect-cells: Must be one, with the argument being the MBUS
-   port ID
-
-Each device having to perform their DMA through the MBUS must have the
-interconnects and interconnect-names properties set to the MBUS
-controller and with "dma-mem" as the interconnect name.
-
-Example:
-
-mbus: dram-controller@1c01000 {
-	compatible = "allwinner,sun5i-a13-mbus";
-	reg = <0x01c01000 0x1000>;
-	clocks = <&ccu CLK_MBUS>;
-	dma-ranges = <0x00000000 0x40000000 0x20000000>;
-	#interconnect-cells = <1>;
-};
-
-fe0: display-frontend@1e00000 {
-	compatible = "allwinner,sun5i-a13-display-frontend";
-	...
-	interconnects = <&mbus 19>;
-	interconnect-names = "dma-mem";
-};
diff --git a/dts/Bindings/arm/ux500.yaml b/dts/Bindings/arm/ux500.yaml
new file mode 100644
index 0000000000..accaee9060
--- /dev/null
+++ b/dts/Bindings/arm/ux500.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ux500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ux500 platforms device tree bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: ST-Ericsson HREF (pre-v60)
+        items:
+          - const: st-ericsson,mop500
+          - const: st-ericsson,u8500
+
+      - description: ST-Ericsson HREF (v60+)
+        items:
+          - const: st-ericsson,hrefv60+
+          - const: st-ericsson,u8500
+
+      - description: Calao Systems Snowball
+        items:
+          - const: calaosystems,snowball-a9500
+          - const: st-ericsson,u9500
+
+      - description: Samsung Galaxy S III mini (GT-I8190)
+        items:
+          - const: samsung,golden
+          - const: st-ericsson,u8500
diff --git a/dts/Bindings/ata/ahci-platform.txt b/dts/Bindings/ata/ahci-platform.txt
index 55c6fab1b3..77091a2776 100644
--- a/dts/Bindings/ata/ahci-platform.txt
+++ b/dts/Bindings/ata/ahci-platform.txt
@@ -9,8 +9,6 @@ PHYs.
 
 Required properties:
 - compatible        : compatible string, one of:
-  - "allwinner,sun4i-a10-ahci"
-  - "allwinner,sun8i-r40-ahci"
   - "brcm,iproc-ahci"
   - "hisilicon,hisi-ahci"
   - "cavium,octeon-7130-ahci"
@@ -45,8 +43,6 @@ Required properties when using sub-nodes:
 - #address-cells    : number of cells to encode an address
 - #size-cells       : number of cells representing the size of an address
 
-For allwinner,sun8i-r40-ahci, the reset property must be present.
-
 Sub-nodes required properties:
 - reg		    : the port number
 And at least one of the following properties:
@@ -60,14 +56,6 @@ Examples:
 		interrupts = <115>;
         };
 
-	ahci: sata@1c18000 {
-		compatible = "allwinner,sun4i-a10-ahci";
-		reg = <0x01c18000 0x1000>;
-		interrupts = <56>;
-		clocks = <&pll6 0>, <&ahb_gates 25>;
-		target-supply = <&reg_ahci_5v>;
-	};
-
 With sub-nodes:
 	sata@f7e90000 {
 		compatible = "marvell,berlin2q-achi", "generic-ahci";
diff --git a/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml b/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml
new file mode 100644
index 0000000000..cb530b46be
--- /dev/null
+++ b/dts/Bindings/ata/allwinner,sun4i-a10-ahci.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/allwinner,sun4i-a10-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AHCI SATA Controller bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-ahci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHCI Bus Clock
+      - description: AHCI Module Clock
+
+  interrupts:
+    maxItems: 1
+
+  target-supply:
+    description: Regulator for SATA target power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ahci: sata@1c18000 {
+        compatible = "allwinner,sun4i-a10-ahci";
+        reg = <0x01c18000 0x1000>;
+        interrupts = <56>;
+        clocks = <&pll6 0>, <&ahb_gates 25>;
+        target-supply = <&reg_ahci_5v>;
+    };
diff --git a/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml b/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml
new file mode 100644
index 0000000000..e6b42a113f
--- /dev/null
+++ b/dts/Bindings/ata/allwinner,sun8i-r40-ahci.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/allwinner,sun8i-r40-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 AHCI SATA Controller bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-r40-ahci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AHCI Bus Clock
+      - description: AHCI Module Clock
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: ahci
+
+  ahci-supply:
+    description: Regulator for the AHCI controller
+
+  phy-supply:
+    description: Regulator for the SATA PHY power
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+    ahci: sata@1c18000 {
+        compatible = "allwinner,sun8i-r40-ahci";
+        reg = <0x01c18000 0x1000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+        resets = <&ccu RST_BUS_SATA>;
+        reset-names = "ahci";
+        ahci-supply = <&reg_dldo4>;
+        phy-supply = <&reg_eldo3>;
+    };
+
+...
diff --git a/dts/Bindings/ata/brcm,sata-brcm.txt b/dts/Bindings/ata/brcm,sata-brcm.txt
index 7713a413c6..b9ae4ce4a0 100644
--- a/dts/Bindings/ata/brcm,sata-brcm.txt
+++ b/dts/Bindings/ata/brcm,sata-brcm.txt
@@ -5,6 +5,7 @@ Each SATA controller should have its own node.
 
 Required properties:
 - compatible         : should be one or more of
+			"brcm,bcm7216-ahci"
 			"brcm,bcm7425-ahci"
 			"brcm,bcm7445-ahci"
 			"brcm,bcm-nsp-ahci"
@@ -14,6 +15,12 @@ Required properties:
 - reg-names          : "ahci" and "top-ctrl"
 - interrupts         : interrupt mapping for SATA IRQ
 
+Optional properties:
+
+- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
+  pointing to the RESCAL reset controller provider node.
+- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
+
 Also see ahci-platform.txt.
 
 Example:
diff --git a/dts/Bindings/ata/faraday,ftide010.txt b/dts/Bindings/ata/faraday,ftide010.txt
deleted file mode 100644
index a0c64a2910..0000000000
--- a/dts/Bindings/ata/faraday,ftide010.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Faraday Technology FTIDE010 PATA controller
-
-This controller is the first Faraday IDE interface block, used in the
-StorLink SL2312 and SL3516, later known as the Cortina Systems Gemini
-platform. The controller can do PIO modes 0 through 4, Multi-word DMA
-(MWDM)modes 0 through 2 and Ultra DMA modes 0 through 6.
-
-On the Gemini platform, this PATA block is accompanied by a PATA to
-SATA bridge in order to support SATA. This is why a phandle to that
-controller is compulsory on that platform.
-
-The timing properties are unique per-SoC, not per-board.
-
-Required properties:
-- compatible: should be one of
-  "cortina,gemini-pata", "faraday,ftide010"
-  "faraday,ftide010"
-- interrupts: interrupt for the block
-- reg: registers and size for the block
-
-Optional properties:
-- clocks: a SoC clock running the peripheral.
-- clock-names: should be set to "PCLK" for the peripheral clock.
-
-Required properties for "cortina,gemini-pata" compatible:
-- sata: a phande to the Gemini PATA to SATA bridge, see
-  cortina,gemini-sata-bridge.txt for details.
-
-Example:
-
-ata@63000000 {
-	compatible = "cortina,gemini-pata", "faraday,ftide010";
-	reg = <0x63000000 0x100>;
-	interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&gcc GEMINI_CLK_GATE_IDE>;
-	clock-names = "PCLK";
-	sata = <&sata>;
-};
diff --git a/dts/Bindings/ata/faraday,ftide010.yaml b/dts/Bindings/ata/faraday,ftide010.yaml
new file mode 100644
index 0000000000..bfc6357476
--- /dev/null
+++ b/dts/Bindings/ata/faraday,ftide010.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/faraday,ftide010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTIDE010 PATA controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This controller is the first Faraday IDE interface block, used in the
+  StorLink SL3512 and SL3516, later known as the Cortina Systems Gemini
+  platform. The controller can do PIO modes 0 through 4, Multi-word DMA
+  (MWDM) modes 0 through 2 and Ultra DMA modes 0 through 6.
+
+  On the Gemini platform, this PATA block is accompanied by a PATA to
+  SATA bridge in order to support SATA. This is why a phandle to that
+  controller is compulsory on that platform.
+
+  The timing properties are unique per-SoC, not per-board.
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftide010
+      - items:
+        - const: cortina,gemini-pata
+        - const: faraday,ftide010
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    const: PCLK
+
+  sata:
+    description:
+      phandle to the Gemini PATA to SATA bridge, if available
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: pata-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: cortina,gemini-pata
+
+    then:
+      required:
+        - sata
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+
+    ide@63000000 {
+      compatible = "cortina,gemini-pata", "faraday,ftide010";
+      reg = <0x63000000 0x100>;
+      interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&gcc GEMINI_CLK_GATE_IDE>;
+      clock-names = "PCLK";
+      sata = <&sata>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ide-port@0 {
+        reg = <0>;
+      };
+      ide-port@1 {
+        reg = <1>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/ata/pata-common.yaml b/dts/Bindings/ata/pata-common.yaml
new file mode 100644
index 0000000000..fc5ebbe710
--- /dev/null
+++ b/dts/Bindings/ata/pata-common.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/pata-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Parallel AT attachment (PATA) controllers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to most Parallel
+  ATA (PATA, also known as IDE) AT attachment storage devices.
+  It doesn't constitue a device tree binding specification by itself but is
+  meant to be referenced by device tree bindings.
+
+  The PATA (IDE) controller-specific device tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  $nodename:
+    pattern: "^ide(@.*)?$"
+    description:
+      Specifies the host controller node. PATA host controller nodes are named
+      "ide".
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^ide-port@[0-1]$":
+    description: |
+      DT nodes for ports connected on the PATA host. The master drive will have
+      ID number 0 and the slave drive will have ID number 1. The PATA port
+      nodes will be named "ide-port".
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+        description:
+          The ID number of the drive port, 0 for the master port and 1 for the
+          slave port.
+
+...
diff --git a/dts/Bindings/ata/sata-common.yaml b/dts/Bindings/ata/sata-common.yaml
new file mode 100644
index 0000000000..6783a4dec6
--- /dev/null
+++ b/dts/Bindings/ata/sata-common.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial AT attachment (SATA) controllers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to most Serial
+  AT attachment (SATA) storage devices. It doesn't constitute a device tree
+  binding specification by itself but is meant to be referenced by device
+  tree bindings.
+
+  The SATA controller-specific device tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  $nodename:
+    pattern: "^sata(@.*)?$"
+    description:
+      Specifies the host controller node. SATA host controller nodes are named
+      "sata"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    description: |
+      DT nodes for ports connected on the SATA host. The SATA port
+      nodes will be named "sata-port".
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 14
+        description:
+          The ID number of the drive port SATA can potentially use a port
+          multiplier making it possible to connect up to 15 disks to a single
+          SATA port.
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
new file mode 100644
index 0000000000..558db4b6ed
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AHB Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-ahb-clk
+      - allwinner,sun6i-a31-ahb1-clk
+      - allwinner,sun8i-h3-ahb2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun4i-a10-ahb-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-ahb1-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-ahb2-clk
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+examples:
+  - |
+    ahb@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-ahb-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&axi>;
+        clock-output-names = "ahb";
+    };
+
+  - |
+    ahb1@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun6i-a31-ahb1-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+        clock-output-names = "ahb1";
+    };
+
+  - |
+    ahb2_clk@1c2005c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-h3-ahb2-clk";
+        reg = <0x01c2005c 0x4>;
+        clocks = <&ahb1>, <&pll6d2>;
+        clock-output-names = "ahb2";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
new file mode 100644
index 0000000000..b1e3d739be
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB0 Bus Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-apb0-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    apb0@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-apb0-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&ahb>;
+        clock-output-names = "apb0";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
new file mode 100644
index 0000000000..51b7a6d4ea
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 APB1 Bus Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-apb1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20058 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-apb1-clk";
+        reg = <0x01c20058 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+        clock-output-names = "apb1";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
new file mode 100644
index 0000000000..d801158e15
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 AXI Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-axi-clk
+      - allwinner,sun8i-a23-axi-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    axi@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-axi-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&cpu>;
+        clock-output-names = "axi";
+    };
+
+  - |
+    axi_clk@1c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-axi-clk";
+        reg = <0x01c20050 0x4>;
+        clocks = <&cpu>;
+        clock-output-names = "axi";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
new file mode 100644
index 0000000000..0dfafba1a1
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-cpu-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    cpu@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-cpu-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+        clock-output-names = "cpu";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-display-clk.yaml
new file mode 100644
index 0000000000..7484a7ab7d
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-display-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20104 {
+        #clock-cells = <0>;
+        #reset-cells = <0>;
+        compatible = "allwinner,sun4i-a10-display-clk";
+        reg = <0x01c20104 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll5 1>;
+        clock-output-names = "de-be";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
new file mode 100644
index 0000000000..ed1b2126a8
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      This additional argument passed to that clock is the offset of
+      the bit controlling this particular gate in the register.
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-gates-clk
+      - const: allwinner,sun4i-a10-axi-gates-clk
+      - const: allwinner,sun4i-a10-ahb-gates-clk
+      - const: allwinner,sun5i-a10s-ahb-gates-clk
+      - const: allwinner,sun5i-a13-ahb-gates-clk
+      - const: allwinner,sun7i-a20-ahb-gates-clk
+      - const: allwinner,sun6i-a31-ahb1-gates-clk
+      - const: allwinner,sun8i-a23-ahb1-gates-clk
+      - const: allwinner,sun9i-a80-ahb0-gates-clk
+      - const: allwinner,sun9i-a80-ahb1-gates-clk
+      - const: allwinner,sun9i-a80-ahb2-gates-clk
+      - const: allwinner,sun4i-a10-apb0-gates-clk
+      - const: allwinner,sun5i-a10s-apb0-gates-clk
+      - const: allwinner,sun5i-a13-apb0-gates-clk
+      - const: allwinner,sun7i-a20-apb0-gates-clk
+      - const: allwinner,sun9i-a80-apb0-gates-clk
+      - const: allwinner,sun8i-a83t-apb0-gates-clk
+      - const: allwinner,sun4i-a10-apb1-gates-clk
+      - const: allwinner,sun5i-a13-apb1-gates-clk
+      - const: allwinner,sun5i-a10s-apb1-gates-clk
+      - const: allwinner,sun6i-a31-apb1-gates-clk
+      - const: allwinner,sun7i-a20-apb1-gates-clk
+      - const: allwinner,sun8i-a23-apb1-gates-clk
+      - const: allwinner,sun9i-a80-apb1-gates-clk
+      - const: allwinner,sun6i-a31-apb2-gates-clk
+      - const: allwinner,sun8i-a23-apb2-gates-clk
+      - const: allwinner,sun8i-a83t-bus-gates-clk
+      - const: allwinner,sun9i-a80-apbs-gates-clk
+      - const: allwinner,sun4i-a10-dram-gates-clk
+
+      - items:
+        - const: allwinner,sun5i-a13-dram-gates-clk
+        - const: allwinner,sun4i-a10-gates-clk
+
+      - items:
+        - const: allwinner,sun8i-h3-apb0-gates-clk
+        - const: allwinner,sun4i-a10-gates-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-indices:
+    minItems: 1
+    maxItems: 64
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-indices
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2005c {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-axi-gates-clk";
+        reg = <0x01c2005c 0x4>;
+        clocks = <&axi>;
+        clock-indices = <0>;
+        clock-output-names = "axi_dram";
+    };
+
+  - |
+    clk@1c20060 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+        reg = <0x01c20060 0x8>;
+        clocks = <&ahb>;
+        clock-indices = <0>, <1>,
+                        <2>, <3>,
+                        <4>, <5>, <6>,
+                        <7>, <8>, <9>,
+                        <10>, <11>, <12>,
+                        <13>, <14>, <16>,
+                        <17>, <18>, <20>,
+                        <21>, <22>, <23>,
+                        <24>, <25>, <26>,
+                        <32>, <33>, <34>,
+                        <35>, <36>, <37>,
+                        <40>, <41>, <43>,
+                        <44>, <45>,
+                        <46>, <47>,
+                        <50>, <52>;
+        clock-output-names = "ahb_usb0", "ahb_ehci0",
+                             "ahb_ohci0", "ahb_ehci1",
+                             "ahb_ohci1", "ahb_ss", "ahb_dma",
+                             "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+                             "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+                             "ahb_nand", "ahb_sdram", "ahb_ace",
+                             "ahb_emac", "ahb_ts", "ahb_spi0",
+                             "ahb_spi1", "ahb_spi2", "ahb_spi3",
+                             "ahb_pata", "ahb_sata", "ahb_gps",
+                             "ahb_ve", "ahb_tvd", "ahb_tve0",
+                             "ahb_tve1", "ahb_lcd0", "ahb_lcd1",
+                             "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+                             "ahb_de_be0", "ahb_de_be1",
+                             "ahb_de_fe0", "ahb_de_fe1",
+                             "ahb_mp", "ahb_mali400";
+    };
+
+
+  - |
+    clk@1c20068 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+        reg = <0x01c20068 0x4>;
+        clocks = <&apb0>;
+        clock-indices = <0>, <1>,
+                        <2>, <3>,
+                        <5>, <6>,
+                        <7>, <10>;
+        clock-output-names = "apb0_codec", "apb0_spdif",
+                             "apb0_ac97", "apb0_iis",
+                             "apb0_pio", "apb0_ir0",
+                             "apb0_ir1", "apb0_keypad";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
new file mode 100644
index 0000000000..18f131e262
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 MBUS Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun5i-a13-mbus-clk
+      - allwinner,sun8i-a23-mbus-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2015c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun5i-a13-mbus-clk";
+        reg = <0x01c2015c 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "mbus";
+    };
+
+  - |
+    clk@1c2015c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-mbus-clk";
+        reg = <0x01c2015c 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+        clock-output-names = "mbus";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
new file mode 100644
index 0000000000..5199285a66
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      There is three different outputs: the main clock, with the ID 0,
+      and the output and sample clocks, with the IDs 1 and 2,
+      respectively.
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-mmc-clk
+      - allwinner,sun9i-a80-mmc-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 3
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun4i-a10-mmc-clk
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+else:
+  properties:
+    clocks:
+      maxItems: 2
+
+examples:
+  - |
+    clk@1c20088 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-mmc-clk";
+        reg = <0x01c20088 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "mmc0",
+                             "mmc0_output",
+                             "mmc0_sample";
+    };
+
+  - |
+    clk@6000410 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun9i-a80-mmc-clk";
+        reg = <0x06000410 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "mmc0", "mmc0_output",
+                             "mmc0_sample";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
new file mode 100644
index 0000000000..3e2abe3e67
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 0 Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun4i-a10-mod0-clk
+          - allwinner,sun9i-a80-mod0-clk
+
+  # The PRCM on the A31 and A23 will have the reg property missing,
+  # since it's set at the upper level node, and will be validated by
+  # PRCM's schema. Make sure we only validate standalone nodes.
+  required:
+    - compatible
+    - reg
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-mod0-clk
+      - allwinner,sun9i-a80-mod0-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    # On the A80, the PRCM mod0 clocks have 2 parents.
+    minItems: 2
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20080 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod0-clk";
+        reg = <0x01c20080 0x4>;
+        clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+        clock-output-names = "nand";
+    };
+
+  - |
+    clk@8001454 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod0-clk";
+        reg = <0x08001454 0x4>;
+        clocks = <&osc32k>, <&osc24M>;
+        clock-output-names = "r_ir";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
new file mode 100644
index 0000000000..7ddb55c75c
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Module 1 Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-mod1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-pll2.h>
+
+    clk@1c200c0 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-mod1-clk";
+        reg = <0x01c200c0 0x4>;
+        clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+                 <&pll2 SUN4I_A10_PLL2_4X>,
+                 <&pll2 SUN4I_A10_PLL2_2X>,
+                 <&pll2 SUN4I_A10_PLL2_1X>;
+        clock-output-names = "spdif";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
new file mode 100644
index 0000000000..69cfa4a3d5
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-osc-clk
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: >
+      Frequency of the main oscillator.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clock-frequency
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    osc24M: clk@01c20050 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-osc-clk";
+        reg = <0x01c20050 0x4>;
+        clock-frequency = <24000000>;
+        clock-output-names = "osc24M";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
new file mode 100644
index 0000000000..e9c4cf834a
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 CPU PLL Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-pll1-clk
+      - allwinner,sun6i-a31-pll1-clk
+      - allwinner,sun8i-a23-pll1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-pll1";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "osc24M";
+    };
+
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun6i-a31-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll1";
+    };
+
+  - |
+    clk@1c20000 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun8i-a23-pll1-clk";
+        reg = <0x01c20000 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll1";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
new file mode 100644
index 0000000000..4b80a42fb3
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video PLL Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-pll3-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20010 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-pll3-clk";
+        reg = <0x01c20010 0x4>;
+        clocks = <&osc3M>;
+        clock-output-names = "pll3";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
new file mode 100644
index 0000000000..415bd77de5
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DRAM PLL Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the DRAM clock output, the second is meant
+      for peripherals on the SoC.
+
+  compatible:
+    const: allwinner,sun4i-a10-pll5-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20020 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-pll5-clk";
+        reg = <0x01c20020 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll5_ddr", "pll5_other";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
new file mode 100644
index 0000000000..ec5652f760
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Peripheral PLL Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the SATA clock output, the second is the
+      regular PLL output, the third is a PLL output at twice the rate.
+
+  compatible:
+    const: allwinner,sun4i-a10-pll6-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 3
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20028 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun4i-a10-pll6-clk";
+        reg = <0x01c20028 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll6_sata", "pll6_other", "pll6";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
new file mode 100644
index 0000000000..0a335c615e
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-tcon-ch0-clk
+      - allwinner,sun4i-a10-tcon-ch1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun4i-a10-tcon-ch0-clk
+
+then:
+  required:
+    - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20118 {
+        #clock-cells = <0>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+        reg = <0x01c20118 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+        clock-output-names = "tcon-ch0-sclk";
+    };
+
+  - |
+    clk@1c2012c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+        reg = <0x01c2012c 0x4>;
+        clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+        clock-output-names = "tcon-ch1-sclk";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
new file mode 100644
index 0000000000..cd95d25bfe
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-usb-clk
+      - allwinner,sun5i-a13-usb-clk
+      - allwinner,sun6i-a31-usb-clk
+      - allwinner,sun8i-a23-usb-clk
+      - allwinner,sun8i-h3-usb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 8
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun4i-a10-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun5i-a13-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-a23-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-usb-clk
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 8
+
+examples:
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun4i-a10-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&pll6 1>;
+        clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun5i-a13-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&pll6 1>;
+        clock-output-names = "usb_ohci0", "usb_phy";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+                             "usb_ohci0", "usb_ohci1",
+                             "usb_ohci2";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun8i-a23-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
+                             "usb_hsic_12M", "usb_ohci0";
+    };
+
+  - |
+    clk@1c200cc {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun8i-h3-usb-clk";
+        reg = <0x01c200cc 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "usb_phy0", "usb_phy1",
+                             "usb_phy2", "usb_phy3",
+                             "usb_ohci0", "usb_ohci1",
+                             "usb_ohci2", "usb_ohci3";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/dts/Bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
new file mode 100644
index 0000000000..5dfd0c1c27
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video Engine Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  "#reset-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun4i-a10-ve-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c2013c {
+        #clock-cells = <0>;
+        #reset-cells = <0>;
+        compatible = "allwinner,sun4i-a10-ve-clk";
+        reg = <0x01c2013c 0x4>;
+        clocks = <&pll4>;
+        clock-output-names = "ve";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/dts/Bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
new file mode 100644
index 0000000000..99add7991c
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 AHB Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun5i-a13-ahb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb@1c20054 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun5i-a13-ahb-clk";
+        reg = <0x01c20054 0x4>;
+        clocks = <&axi>, <&cpu>, <&pll6 1>;
+        clock-output-names = "ahb";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/dts/Bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
new file mode 100644
index 0000000000..5f377205af
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral PLL Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The first output is the regular PLL output, the second is a PLL
+      output at twice the rate.
+
+  compatible:
+    const: allwinner,sun6i-a31-pll6-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 2
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20028 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun6i-a31-pll6-clk";
+        reg = <0x01c20028 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll6", "pll6x2";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/dts/Bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
new file mode 100644
index 0000000000..59e5dce1b6
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 GMAC TX Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun7i-a20-gmac-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description: >
+      The parent clocks shall be fixed rate dummy clocks at 25 MHz and
+      125 MHz, respectively.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20164 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun7i-a20-gmac-clk";
+        reg = <0x01c20164 0x4>;
+        clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+        clock-output-names = "gmac_tx";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/dts/Bindings/clock/allwinner,sun7i-a20-out-clk.yaml
new file mode 100644
index 0000000000..c745733bcf
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A20 Output Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun7i-a20-out-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c201f0 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun7i-a20-out-clk";
+        reg = <0x01c201f0 0x4>;
+        clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+        clock-output-names = "clk_out_a";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/dts/Bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
new file mode 100644
index 0000000000..3f995d2b30
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-clk
+      - const: allwinner,sun8i-h3-de2-clk
+      - const: allwinner,sun8i-v3s-de2-clk
+      - const: allwinner,sun50i-a64-de2-clk
+      - const: allwinner,sun50i-h5-de2-clk
+      - const: allwinner,sun50i-h6-de2-clk
+      - items:
+          - const: allwinner,sun8i-r40-de2-clk
+          - const: allwinner,sun8i-h3-de2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    de2_clocks: clock@1000000 {
+        compatible = "allwinner,sun8i-h3-de2-clk";
+        reg = <0x01000000 0x100000>;
+        clocks = <&ccu CLK_BUS_DE>,
+                 <&ccu CLK_DE>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/dts/Bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
new file mode 100644
index 0000000000..3eb2bf65b2
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      This additional argument passed to that clock is the offset of
+      the bit controlling this particular gate in the register.
+
+  compatible:
+    const: allwinner,sun8i-h3-bus-gates-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-indices:
+    minItems: 1
+    maxItems: 64
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-indices
+  - clock-names
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c20060 {
+        #clock-cells = <1>;
+        compatible = "allwinner,sun8i-h3-bus-gates-clk";
+        reg = <0x01c20060 0x14>;
+        clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+        clock-names = "ahb1", "ahb2", "apb1", "apb2";
+        clock-indices = <5>, <6>, <8>,
+                        <9>, <10>, <13>,
+                        <14>, <17>, <18>,
+                        <19>, <20>,
+                        <21>, <23>,
+                        <24>, <25>,
+                        <26>, <27>,
+                        <28>, <29>,
+                        <30>, <31>, <32>,
+                        <35>, <36>, <37>,
+                        <40>, <41>, <43>,
+                        <44>, <52>, <53>,
+                        <54>, <64>,
+                        <65>, <69>, <72>,
+                        <76>, <77>, <78>,
+                        <96>, <97>, <98>,
+                        <112>, <113>,
+                        <114>, <115>,
+                        <116>, <128>, <135>;
+        clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
+                             "bus_mmc1", "bus_mmc2", "bus_nand",
+                             "bus_sdram", "bus_gmac", "bus_ts",
+                             "bus_hstimer", "bus_spi0",
+                             "bus_spi1", "bus_otg",
+                             "bus_otg_ehci0", "bus_ehci1",
+                             "bus_ehci2", "bus_ehci3",
+                             "bus_otg_ohci0", "bus_ohci1",
+                             "bus_ohci2", "bus_ohci3", "bus_ve",
+                             "bus_lcd0", "bus_lcd1", "bus_deint",
+                             "bus_csi", "bus_tve", "bus_hdmi",
+                             "bus_de", "bus_gpu", "bus_msgbox",
+                             "bus_spinlock", "bus_codec",
+                             "bus_spdif", "bus_pio", "bus_ths",
+                             "bus_i2s0", "bus_i2s1", "bus_i2s2",
+                             "bus_i2c0", "bus_i2c1", "bus_i2c2",
+                             "bus_uart0", "bus_uart1",
+                             "bus_uart2", "bus_uart3",
+                             "bus_scr", "bus_ephy", "bus_dbg";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
new file mode 100644
index 0000000000..d178da90aa
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 AHB Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-ahb-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@6000060 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-ahb-clk";
+        reg = <0x06000060 0x4>;
+        clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+        clock-output-names = "ahb0";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
new file mode 100644
index 0000000000..0351c79bd2
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 APB0 Bus Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun9i-a80-apb0-clk
+      - allwinner,sun9i-a80-apb1-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@6000070 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-apb0-clk";
+        reg = <0x06000070 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "apb0";
+    };
+
+  - |
+    clk@6000074 {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-apb1-clk";
+        reg = <0x06000074 0x4>;
+        clocks = <&osc24M>, <&pll4>;
+        clock-output-names = "apb1";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
new file mode 100644
index 0000000000..24d5b2f1a3
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 CPUS Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-cpus-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@8001410 {
+        compatible = "allwinner,sun9i-a80-cpus-clk";
+        reg = <0x08001410 0x4>;
+        #clock-cells = <0>;
+        clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+        clock-output-names = "cpus";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-de-clks.yaml
new file mode 100644
index 0000000000..a82c7c7e94
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-de-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: RAM Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: mod
+      - const: dram
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+    #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+    de_clocks: clock@3000000 {
+        compatible = "allwinner,sun9i-a80-de-clks";
+        reg = <0x03000000 0x30>;
+        clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+        clock-names = "mod", "dram", "bus";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
new file mode 100644
index 0000000000..07f38def7d
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 GT Bus Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-gt-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 4
+    description: >
+      The parent order must match the hardware programming order.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@0600005c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-gt-clk";
+        reg = <0x0600005c 0x4>;
+        clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+        clock-output-names = "gt";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
new file mode 100644
index 0000000000..20dc115fa2
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 MMC Configuration Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+description: >
+  There is one clock/reset output per mmc controller. The number of
+  outputs is determined by the size of the address block, which is
+  related to the overall mmc block.
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-mmc-config-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 4
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@1c13000 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-mmc-config-clk";
+        reg = <0x01c13000 0x10>;
+        clocks = <&ahb0_gates 8>;
+        resets = <&ahb0_resets 8>;
+        clock-output-names = "mmc0_config", "mmc1_config",
+                             "mmc2_config", "mmc3_config";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
new file mode 100644
index 0000000000..b76bab6a30
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Peripheral PLL Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-pll4-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@600000c {
+        #clock-cells = <0>;
+        compatible = "allwinner,sun9i-a80-pll4-clk";
+        reg = <0x0600000c 0x4>;
+        clocks = <&osc24M>;
+        clock-output-names = "pll4";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
new file mode 100644
index 0000000000..fa0ee03a52
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clocks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
new file mode 100644
index 0000000000..15218d10e7
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Module Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-mod-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 6
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@a08000 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-usb-mod-clk";
+        reg = <0x00a08000 0x4>;
+        clocks = <&ahb1_gates 1>;
+        clock-output-names = "usb0_ahb", "usb_ohci0",
+                             "usb1_ahb", "usb_ohci1",
+                             "usb2_ahb", "usb_ohci2";
+    };
+
+...
diff --git a/dts/Bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/dts/Bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
new file mode 100644
index 0000000000..2569041684
--- /dev/null
+++ b/dts/Bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Clock Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  "#clock-cells":
+    const: 1
+    description: >
+      The additional ID argument passed to the clock shall refer to
+      the index of the output.
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-output-names:
+    maxItems: 6
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-output-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clk@a08004 {
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        compatible = "allwinner,sun9i-a80-usb-phy-clk";
+        reg = <0x00a08004 0x4>;
+        clocks = <&ahb1_gates 1>;
+        clock-output-names = "usb_phy0", "usb_hsic1_480M",
+                             "usb_phy1", "usb_hsic2_480M",
+                             "usb_phy2", "usb_hsic_12M";
+    };
+
+...
diff --git a/dts/Bindings/clock/amlogic,meson8-ddr-clkc.yaml b/dts/Bindings/clock/amlogic,meson8-ddr-clkc.yaml
new file mode 100644
index 0000000000..4b8669f870
--- /dev/null
+++ b/dts/Bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic DDR Clock Controller Device Tree Bindings
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson8-ddr-clkc
+      - amlogic,meson8b-ddr-clkc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ddr_clkc: clock-controller@400 {
+      compatible = "amlogic,meson8-ddr-clkc";
+      reg = <0x400 0x20>;
+      clocks = <&xtal>;
+      clock-names = "xtal";
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/clock/amlogic,meson8b-clkc.txt b/dts/Bindings/clock/amlogic,meson8b-clkc.txt
index 4d94091c1d..cc51e4746b 100644
--- a/dts/Bindings/clock/amlogic,meson8b-clkc.txt
+++ b/dts/Bindings/clock/amlogic,meson8b-clkc.txt
@@ -11,6 +11,11 @@ Required Properties:
 	- "amlogic,meson8m2-clkc" for Meson8m2 (S812) SoCs
 - #clock-cells: should be 1.
 - #reset-cells: should be 1.
+- clocks: list of clock phandles, one for each entry in clock-names
+- clock-names: should contain the following:
+  * "xtal": the 24MHz system oscillator
+  * "ddr_pll": the DDR PLL clock
+  * "clk_32k": (if present) the 32kHz clock signal from GPIOAO_6 (CLK_32K_IN)
 
 Parent node should have the following properties :
 - compatible: "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
diff --git a/dts/Bindings/clock/bitmain,bm1880-clk.yaml b/dts/Bindings/clock/bitmain,bm1880-clk.yaml
index e63827399c..8559fe8f7e 100644
--- a/dts/Bindings/clock/bitmain,bm1880-clk.yaml
+++ b/dts/Bindings/clock/bitmain,bm1880-clk.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/clock/bitmain,bm1880-clk.yaml#
+$id: http://devicetree.org/schemas/clock/bitmain,bm1880-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Bitmain BM1880 Clock Controller
diff --git a/dts/Bindings/clock/fsl,plldig.yaml b/dts/Bindings/clock/fsl,plldig.yaml
new file mode 100644
index 0000000000..c8350030b3
--- /dev/null
+++ b/dts/Bindings/clock/fsl,plldig.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding
+
+maintainers:
+  - Wen He <wen.he_1@nxp.com>
+
+description: |
+  NXP LS1028A has a clock domain PXLCLK0 used for the Display output
+  interface in the display core, as implemented in TSMC CLN28HPM PLL.
+  which generate and offers pixel clocks to Display.
+
+properties:
+  compatible:
+    const: fsl,ls1028a-plldig
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  fsl,vco-hz:
+     description: Optional for VCO frequency of the PLL in Hertz.
+        The VCO frequency of this PLL cannot be changed during runtime
+        only at startup. Therefore, the output frequencies are very
+        limited and might not even closely match the requested frequency.
+        To work around this restriction the user may specify its own
+        desired VCO frequency for the PLL.
+     minimum: 650000000
+     maximum: 1300000000
+     default: 1188000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+examples:
+  # Display PIXEL Clock node:
+  - |
+    dpclk: clock-display@f1f0000 {
+        compatible = "fsl,ls1028a-plldig";
+        reg = <0x0 0xf1f0000 0x0 0xffff>;
+        #clock-cells = <0>;
+        clocks = <&osc_27m>;
+    };
+
+...
diff --git a/dts/Bindings/clock/fsl,sai-clock.yaml b/dts/Bindings/clock/fsl,sai-clock.yaml
new file mode 100644
index 0000000000..fc3bdfdc09
--- /dev/null
+++ b/dts/Bindings/clock/fsl,sai-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SAI bitclock-as-a-clock binding
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  It is possible to use the BCLK pin of a SAI module as a generic clock
+  output. Some SoC are very constrained in their pin multiplexer
+  configuration. Eg. pins can only be changed groups. For example, on the
+  LS1028A SoC you can only enable SAIs in pairs. If you use only one SAI,
+  the second pins are wasted. Using this binding it is possible to use the
+  clock of the second SAI as a MCLK clock for an audio codec, for example.
+
+  This is a composite of a gated clock and a divider clock.
+
+properties:
+  compatible:
+    const: fsl,vf610-sai-clock
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mclk: clock-mclk@f130080 {
+            compatible = "fsl,vf610-sai-clock";
+            reg = <0x0 0xf130080 0x0 0x80>;
+            #clock-cells = <0>;
+            clocks = <&parentclk>;
+        };
+    };
diff --git a/dts/Bindings/clock/imx8mn-clock.yaml b/dts/Bindings/clock/imx8mn-clock.yaml
index 622f3658bd..cd0b8a3413 100644
--- a/dts/Bindings/clock/imx8mn-clock.yaml
+++ b/dts/Bindings/clock/imx8mn-clock.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/clock/imx8mn-clock.yaml#
+$id: http://devicetree.org/schemas/clock/imx8mn-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: NXP i.MX8M Nano Clock Control Module Binding
diff --git a/dts/Bindings/clock/imx8mp-clock.yaml b/dts/Bindings/clock/imx8mp-clock.yaml
new file mode 100644
index 0000000000..89aee63c90
--- /dev/null
+++ b/dts/Bindings/clock/imx8mp-clock.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mp-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Plus Clock Control Module Binding
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  NXP i.MX8M Plus clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+      - description: ext2 clock input
+      - description: ext3 clock input
+      - description: ext4 clock input
+
+  clock-names:
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+      - const: clk_ext2
+      - const: clk_ext3
+      - const: clk_ext4
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
+      for the full list of i.MX8M Plus clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+examples:
+  # Clock Control Module node:
+  - |
+    clk: clock-controller@30380000 {
+        compatible = "fsl,imx8mp-ccm";
+        reg = <0x30380000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
+                 <&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
+        clock-names = "osc_32k", "osc_24m", "clk_ext1",
+                      "clk_ext2", "clk_ext3", "clk_ext4";
+    };
+
+...
diff --git a/dts/Bindings/clock/milbeaut-clock.yaml b/dts/Bindings/clock/milbeaut-clock.yaml
index 5cf0b81182..f0b804a7f0 100644
--- a/dts/Bindings/clock/milbeaut-clock.yaml
+++ b/dts/Bindings/clock/milbeaut-clock.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/clock/milbeaut-clock.yaml#
+$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Milbeaut SoCs Clock Controller Binding
diff --git a/dts/Bindings/clock/qcom,dispcc.txt b/dts/Bindings/clock/qcom,dispcc.txt
deleted file mode 100644
index d639e18d0b..0000000000
--- a/dts/Bindings/clock/qcom,dispcc.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm Technologies, Inc. Display Clock Controller Binding
-------------------------------------------------------------
-
-Required properties :
-
-- compatible : shall contain "qcom,sdm845-dispcc"
-- reg : shall contain base register location and length.
-- #clock-cells : from common clock binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Example:
-	dispcc: clock-controller@af00000 {
-		compatible = "qcom,sdm845-dispcc";
-		reg = <0xaf00000 0x100000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
new file mode 100644
index 0000000000..17f87178f6
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on APQ8064.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8960.h
+  - dt-bindings/reset/qcom,gcc-msm8960.h
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8064
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    minItems: 1
+    maxItems: 2
+    description:
+      Qualcomm TSENS (thermal sensor device) on some devices can
+      be part of GCC and hence the TSENS properties can also be part
+      of the GCC/clock-controller node.
+      For more details on the TSENS properties please refer
+      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+
+  nvmem-cell-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: calib
+      - const: calib_backup
+
+  '#thermal-sensor-cells':
+    const: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+  - nvmem-cells
+  - nvmem-cell-names
+  - '#thermal-sensor-cells'
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-apq8064";
+      reg = <0x00900000 0x4000>;
+      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+      nvmem-cell-names = "calib", "calib_backup";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      #thermal-sensor-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-ipq8074.yaml b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml
new file mode 100644
index 0000000000..89c6e070e7
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-ipq8074.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8074.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq8074.h
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq8074
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq8074";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-msm8996.yaml b/dts/Bindings/clock/qcom,gcc-msm8996.yaml
new file mode 100644
index 0000000000..18e4e77b8c
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-msm8996.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8996.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8996.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8996
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Second XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: cxo2
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8996";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-msm8998.yaml b/dts/Bindings/clock/qcom,gcc-msm8998.yaml
new file mode 100644
index 0000000000..1d3cae9804
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-msm8998.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8998.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8998.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8998
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: USB 3.0 phy pipe clock
+      - description: UFS phy rx symbol clock for pipe 0
+      - description: UFS phy rx symbol clock for pipe 1
+      - description: UFS phy tx symbol clock
+      - description: PCIE phy pipe clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: usb3_pipe
+      - const: ufs_rx_symbol0
+      - const: ufs_rx_symbol1
+      - const: ufs_tx_symbol0
+      - const: pcie0_pipe
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-msm8998";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x00100000 0xb0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep>,
+               <0>,
+               <0>,
+               <0>,
+               <0>,
+               <0>;
+      clock-names = "xo",
+                    "sleep_clk",
+                    "usb3_pipe",
+                    "ufs_rx_symbol0",
+                    "ufs_rx_symbol1",
+                    "ufs_tx_symbol0",
+                    "pcie0_pipe";
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-qcs404.yaml b/dts/Bindings/clock/qcom,gcc-qcs404.yaml
new file mode 100644
index 0000000000..8cdece395e
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-qcs404.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QCS404.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-qcs404.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcs404
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-qcs404";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-sc7180.yaml b/dts/Bindings/clock/qcom,gcc-sc7180.yaml
new file mode 100644
index 0000000000..ee4f968e29
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-sc7180.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sc7180.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc7180
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc7180";
+      reg = <0 0x00100000 0 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc-sm8150.yaml b/dts/Bindings/clock/qcom,gcc-sm8150.yaml
new file mode 100644
index 0000000000..888e9a7083
--- /dev/null
+++ b/dts/Bindings/clock/qcom,gcc-sm8150.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM8150.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-sm8150.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8150
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8150";
+      reg = <0 0x00100000 0 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,gcc.yaml b/dts/Bindings/clock/qcom,gcc.yaml
index e73a56fb60..d18f8ab9ee 100644
--- a/dts/Bindings/clock/qcom,gcc.yaml
+++ b/dts/Bindings/clock/qcom,gcc.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/clock/qcom,gcc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Global Clock & Reset Controller Binding
@@ -14,46 +14,42 @@ description: |
   Qualcomm global clock control module which supports the clocks, resets and
   power domains.
 
+  See also:
+  - dt-bindings/clock/qcom,gcc-apq8084.h
+  - dt-bindings/reset/qcom,gcc-apq8084.h
+  - dt-bindings/clock/qcom,gcc-ipq4019.h
+  - dt-bindings/clock/qcom,gcc-ipq6018.h
+  - dt-bindings/reset/qcom,gcc-ipq6018.h
+  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  - dt-bindings/clock/qcom,gcc-msm8660.h
+  - dt-bindings/reset/qcom,gcc-msm8660.h
+  - dt-bindings/clock/qcom,gcc-msm8974.h
+  - dt-bindings/reset/qcom,gcc-msm8974.h
+  - dt-bindings/clock/qcom,gcc-msm8994.h
+  - dt-bindings/clock/qcom,gcc-mdm9615.h
+  - dt-bindings/reset/qcom,gcc-mdm9615.h
+  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+  - dt-bindings/clock/qcom,gcc-sdm845.h
+
 properties:
-  compatible :
+  compatible:
     enum:
-       - qcom,gcc-apq8064
-       - qcom,gcc-apq8084
-       - qcom,gcc-ipq8064
-       - qcom,gcc-ipq4019
-       - qcom,gcc-ipq8074
-       - qcom,gcc-msm8660
-       - qcom,gcc-msm8916
-       - qcom,gcc-msm8960
-       - qcom,gcc-msm8974
-       - qcom,gcc-msm8974pro
-       - qcom,gcc-msm8974pro-ac
-       - qcom,gcc-msm8994
-       - qcom,gcc-msm8996
-       - qcom,gcc-msm8998
-       - qcom,gcc-mdm9615
-       - qcom,gcc-qcs404
-       - qcom,gcc-sc7180
-       - qcom,gcc-sdm630
-       - qcom,gcc-sdm660
-       - qcom,gcc-sdm845
-       - qcom,gcc-sm8150
-
-  clocks:
-    minItems: 1
-    maxItems: 3
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-
-  clock-names:
-    minItems: 1
-    maxItems: 3
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
+      - qcom,gcc-apq8084
+      - qcom,gcc-ipq4019
+      - qcom,gcc-ipq6018
+      - qcom,gcc-ipq8064
+      - qcom,gcc-msm8660
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8960
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+      - qcom,gcc-msm8994
+      - qcom,gcc-mdm9615
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+      - qcom,gcc-sdm845
 
   '#clock-cells':
     const: 1
@@ -67,31 +63,9 @@ properties:
   reg:
     maxItems: 1
 
-  nvmem-cells:
-    minItems: 1
-    maxItems: 2
-    description:
-      Qualcomm TSENS (thermal sensor device) on some devices can
-      be part of GCC and hence the TSENS properties can also be part
-      of the GCC/clock-controller node.
-      For more details on the TSENS properties please refer
-      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-
-  nvmem-cell-names:
-    minItems: 1
-    maxItems: 2
-    description:
-      Names for each nvmem-cells specified.
-    items:
-      - const: calib
-      - const: calib_backup
-
-  'thermal-sensor-cells':
-    const: 1
-
   protected-clocks:
     description:
-       Protected clock specifier list as per common clock binding
+      Protected clock specifier list as per common clock binding.
 
 required:
   - compatible
@@ -100,32 +74,6 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,gcc-apq8064
-
-then:
-  required:
-    - nvmem-cells
-    - nvmem-cell-names
-    - '#thermal-sensor-cells'
-
-else:
-  if:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - qcom,gcc-sm8150
-            - qcom,gcc-sc7180
-  then:
-    required:
-       - clocks
-       - clock-names
-
-
 examples:
   # Example for GCC for MSM8960:
   - |
@@ -136,53 +84,4 @@ examples:
       #reset-cells = <1>;
       #power-domain-cells = <1>;
     };
-
-
-  # Example of GCC with TSENS properties:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
-      reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
-    };
-
-  # Example of GCC with protected-clocks properties:
-  - |
-    clock-controller@100000 {
-      compatible = "qcom,gcc-sdm845";
-      reg = <0x100000 0x1f0000>;
-      protected-clocks = <187>, <188>, <189>, <190>, <191>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
-
-  # Example of GCC with clock node properties for SM8150:
-  - |
-    clock-controller@100000 {
-      compatible = "qcom,gcc-sm8150";
-      reg = <0x00100000 0x1f0000>;
-      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <&sleep_clk>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-     };
-
-  # Example of GCC with clock nodes properties for SC7180:
-  - |
-    clock-controller@100000 {
-      compatible = "qcom,gcc-sc7180";
-      reg = <0x100000 0x1f0000>;
-      clocks = <&rpmhcc 0>, <&rpmhcc 1>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao";
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
 ...
diff --git a/dts/Bindings/clock/qcom,gpucc.txt b/dts/Bindings/clock/qcom,gpucc.txt
deleted file mode 100644
index 269afe8a75..0000000000
--- a/dts/Bindings/clock/qcom,gpucc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Qualcomm Graphics Clock & Reset Controller Binding
---------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-gpucc" or "qcom,msm8998-gpucc"
-- reg : shall contain base register location and length
-- #clock-cells : from common clock binding, shall contain 1
-- #reset-cells : from common reset binding, shall contain 1
-- #power-domain-cells : from generic power domain binding, shall contain 1
-- clocks : shall contain the XO clock
-	   shall contain the gpll0 out main clock (msm8998)
-- clock-names : shall be "xo"
-		shall be "gpll0" (msm8998)
-
-Example:
-	gpucc: clock-controller@5090000 {
-		compatible = "qcom,sdm845-gpucc";
-		reg = <0x5090000 0x9000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-		clocks = <&rpmhcc RPMH_CXO_CLK>;
-		clock-names = "xo";
-	};
diff --git a/dts/Bindings/clock/qcom,mmcc.txt b/dts/Bindings/clock/qcom,mmcc.txt
deleted file mode 100644
index 8b0f7841af..0000000000
--- a/dts/Bindings/clock/qcom,mmcc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Qualcomm Multimedia Clock & Reset Controller Binding
-----------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-
-			"qcom,mmcc-apq8064"
-			"qcom,mmcc-apq8084"
-			"qcom,mmcc-msm8660"
-			"qcom,mmcc-msm8960"
-			"qcom,mmcc-msm8974"
-			"qcom,mmcc-msm8996"
-
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-- #reset-cells : shall contain 1
-
-Optional properties :
-- #power-domain-cells : shall contain 1
-
-Example:
-	clock-controller@4000000 {
-		compatible = "qcom,mmcc-msm8960";
-		reg = <0x4000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml
new file mode 100644
index 0000000000..85518494ce
--- /dev/null
+++ b/dts/Bindings/clock/qcom,mmcc.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multimedia Clock & Reset Controller Binding
+
+maintainers:
+  - Jeffrey Hugo <jhugo@codeaurora.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm multimedia clock control module which supports the clocks, resets and
+  power domains.
+
+properties:
+  compatible :
+    enum:
+       - qcom,mmcc-apq8064
+       - qcom,mmcc-apq8084
+       - qcom,mmcc-msm8660
+       - qcom,mmcc-msm8960
+       - qcom,mmcc-msm8974
+       - qcom,mmcc-msm8996
+       - qcom,mmcc-msm8998
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep source
+      - description: Global PLL 0 clock
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: DSI phy instance 1 dsi clock
+      - description: DSI phy instance 1 byte clock
+      - description: HDMI phy PLL clock
+      - description: DisplayPort phy PLL vco clock
+      - description: DisplayPort phy PLL link clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+      - const: gpll0
+      - const: dsi0dsi
+      - const: dsi0byte
+      - const: dsi1dsi
+      - const: dsi1byte
+      - const: hdmipll
+      - const: dpvco
+      - const: dplink
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+       Protected clock specifier list as per common clock binding
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,mmcc-msm8998
+
+then:
+  required:
+    - clocks
+    - clock-names
+
+examples:
+  # Example for MMCC for MSM8960:
+  - |
+    clock-controller@4000000 {
+      compatible = "qcom,mmcc-msm8960";
+      reg = <0x4000000 0x1000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,msm8998-gpucc.yaml b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml
new file mode 100644
index 0000000000..7d853c1a85
--- /dev/null
+++ b/dts/Bindings/clock/qcom,msm8998-gpucc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on MSM8998.
+
+  See also dt-bindings/clock/qcom,gpucc-msm8998.h.
+
+properties:
+  compatible:
+    const: qcom,msm8998-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source (gcc_gpu_gpll0_clk_src)
+
+  clock-names:
+    items:
+      - const: xo
+      - const: gpll0
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5065000 {
+      compatible = "qcom,msm8998-gpucc";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x05065000 0x9000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0_OUT_MAIN>;
+      clock-names = "xo", "gpll0";
+    };
+...
diff --git a/dts/Bindings/clock/qcom,rpmhcc.yaml b/dts/Bindings/clock/qcom,rpmhcc.yaml
index 94e2f14eb9..2cd158f13b 100644
--- a/dts/Bindings/clock/qcom,rpmhcc.yaml
+++ b/dts/Bindings/clock/qcom,rpmhcc.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/clock/qcom,rpmhcc.yaml#
+$id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. RPMh Clocks Bindings
diff --git a/dts/Bindings/clock/qcom,sc7180-dispcc.yaml b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml
new file mode 100644
index 0000000000..0429062f15
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sc7180-dispcc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+  See also dt-bindings/clock/qcom,dispcc-sc7180.h.
+
+properties:
+  compatible:
+    const: qcom,sc7180-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc7180-dispcc";
+      reg = <0 0x0af00000 0 0x200000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,sc7180-gpucc.yaml b/dts/Bindings/clock/qcom,sc7180-gpucc.yaml
new file mode 100644
index 0000000000..5785192cc4
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sc7180-gpucc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+  See also dt-bindings/clock/qcom,gpucc-sc7180.h.
+
+properties:
+  compatible:
+    const: qcom,sc7180-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_gpu_gpll0_clk_src
+      - const: gcc_gpu_gpll0_div_clk_src
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@5090000 {
+      compatible = "qcom,sc7180-gpucc";
+      reg = <0 0x05090000 0 0x9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "gcc_gpu_gpll0_clk_src",
+                    "gcc_gpu_gpll0_div_clk_src";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,sc7180-videocc.yaml b/dts/Bindings/clock/qcom,sc7180-videocc.yaml
new file mode 100644
index 0000000000..31df901884
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sc7180-videocc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller Binding for SC7180
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm video clock control module which supports the clocks, resets and
+  power domains on SC7180.
+
+  See also dt-bindings/clock/qcom,videocc-sc7180.h.
+
+properties:
+  compatible:
+    const: qcom,sc7180-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ab00000 {
+      compatible = "qcom,sc7180-videocc";
+      reg = <0 0x0ab00000 0 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,sdm845-dispcc.yaml b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml
new file mode 100644
index 0000000000..89269ddfbd
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sdm845-dispcc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,dispcc-sdm845.h.
+
+properties:
+  compatible:
+    const: qcom,sdm845-dispcc
+
+  # NOTE: sdm845.dtsi existed for quite some time and specified no clocks.
+  # The code had to use hardcoded mechanisms to find the input clocks.
+  # New dts files should have these clocks.
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_byteclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_link_clk_divsel_ten
+      - const: dp_vco_divided_clk_src_mux
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sdm845-dispcc";
+      reg = <0 0x0af00000 0 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk_src",
+                    "gcc_disp_gpll0_div_clk_src",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_byteclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_link_clk_divsel_ten",
+                    "dp_vco_divided_clk_src_mux";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,sdm845-gpucc.yaml b/dts/Bindings/clock/qcom,sdm845-gpucc.yaml
new file mode 100644
index 0000000000..bac04f1c5d
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sdm845-gpucc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,gpucc-sdm845.h.
+
+properties:
+  compatible:
+    const: qcom,sdm845-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_gpu_gpll0_clk_src
+      - const: gcc_gpu_gpll0_div_clk_src
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@5090000 {
+      compatible = "qcom,sdm845-gpucc";
+      reg = <0 0x05090000 0 0x9000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+               <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+      clock-names = "bi_tcxo",
+                    "gcc_gpu_gpll0_clk_src",
+                    "gcc_gpu_gpll0_div_clk_src";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,sdm845-videocc.yaml b/dts/Bindings/clock/qcom,sdm845-videocc.yaml
new file mode 100644
index 0000000000..9d216c0f11
--- /dev/null
+++ b/dts/Bindings/clock/qcom,sdm845-videocc.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-videocc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Video Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm video clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,videocc-sdm845.h.
+
+properties:
+  compatible:
+    const: qcom,sdm845-videocc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ab00000 {
+      compatible = "qcom,sdm845-videocc";
+      reg = <0 0x0ab00000 0 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/qcom,videocc.txt b/dts/Bindings/clock/qcom,videocc.txt
deleted file mode 100644
index 8a8622c65c..0000000000
--- a/dts/Bindings/clock/qcom,videocc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Video Clock & Reset Controller Binding
------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-videocc"
-- reg : shall contain base register location and length
-- #clock-cells : from common clock binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-
-Example:
-	videocc: clock-controller@ab00000 {
-		compatible = "qcom,sdm845-videocc";
-		reg = <0xab00000 0x10000>;
-		#clock-cells = <1>;
-		#power-domain-cells = <1>;
-		#reset-cells = <1>;
-	};
diff --git a/dts/Bindings/clock/renesas,cpg-mssr.txt b/dts/Bindings/clock/renesas,cpg-mssr.txt
index c7674d0267..f4d153f24a 100644
--- a/dts/Bindings/clock/renesas,cpg-mssr.txt
+++ b/dts/Bindings/clock/renesas,cpg-mssr.txt
@@ -19,7 +19,7 @@ Required Properties:
       - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
       - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C)
       - "renesas,r8a774a1-cpg-mssr" for the r8a774a1 SoC (RZ/G2M)
-      - "renesas,r8a774b1-cpg-mssr" for the r8a774a1 SoC (RZ/G2N)
+      - "renesas,r8a774b1-cpg-mssr" for the r8a774b1 SoC (RZ/G2N)
       - "renesas,r8a774c0-cpg-mssr" for the r8a774c0 SoC (RZ/G2E)
       - "renesas,r8a7790-cpg-mssr" for the r8a7790 SoC (R-Car H2)
       - "renesas,r8a7791-cpg-mssr" for the r8a7791 SoC (R-Car M2-W)
diff --git a/dts/Bindings/clock/st,stm32mp1-rcc.txt b/dts/Bindings/clock/st,stm32mp1-rcc.txt
deleted file mode 100644
index fb9495ea58..0000000000
--- a/dts/Bindings/clock/st,stm32mp1-rcc.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-STMicroelectronics STM32 Peripheral Reset Clock Controller
-==========================================================
-
-The RCC IP is both a reset and a clock controller.
-
-RCC makes also power management (resume/supend and wakeup interrupt).
-
-Please also refer to reset.txt for common reset controller binding usage.
-
-Please also refer to clock-bindings.txt for common clock controller
-binding usage.
-
-
-Required properties:
-- compatible: "st,stm32mp1-rcc", "syscon"
-- reg: should be register base and length as documented in the datasheet
-- #clock-cells: 1, device nodes should specify the clock in their
-  "clocks" property, containing a phandle to the clock device node,
-  an index specifying the clock to use.
-- #reset-cells: Shall be 1
-- interrupts: Should contain a general interrupt line and a interrupt line
-  to the wake-up of processor (CSTOP).
-
-Example:
-	rcc: rcc@50000000 {
-		compatible = "st,stm32mp1-rcc", "syscon";
-		reg = <0x50000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>,
-			     <GIC_SPI 145 IRQ_TYPE_NONE>;
-	};
-
-Specifying clocks
-=================
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/stm32mp1-clks.h header and can be used in device
-tree sources.
-
-Specifying softreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the reset device node and an index specifying
-which channel to use.
-The index is the bit number within the RCC registers bank, starting from RCC
-base address.
-It is calculated as: index = register_offset / 4 * 32 + bit_offset.
-Where bit_offset is the bit offset within the register.
-
-For example on STM32MP1, for LTDC reset:
- ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
-      = 0x180 / 4 * 32 + 0 = 3072
-
-The list of valid indices for STM32MP1 is available in:
-include/dt-bindings/reset-controller/stm32mp1-resets.h
-
-This file implements defines like:
-#define LTDC_R	3072
diff --git a/dts/Bindings/clock/st,stm32mp1-rcc.yaml b/dts/Bindings/clock/st,stm32mp1-rcc.yaml
new file mode 100644
index 0000000000..4e385508f5
--- /dev/null
+++ b/dts/Bindings/clock/st,stm32mp1-rcc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Reset Clock Controller Binding
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@st.com>
+
+description: |
+  The RCC IP is both a reset and a clock controller.
+  RCC makes also power management (resume/supend and wakeup interrupt).
+  Please also refer to reset.txt for common reset controller binding usage.
+
+  This binding uses common clock bindings
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+  Specifying clocks
+  =================
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/stm32mp1-clks.h header and can be used in device
+  tree sources.
+
+  Specifying softreset control of devices
+  =======================================
+
+  Device nodes should specify the reset channel required in their "resets"
+  property, containing a phandle to the reset device node and an index specifying
+  which channel to use.
+  The index is the bit number within the RCC registers bank, starting from RCC
+  base address.
+  It is calculated as: index = register_offset / 4 * 32 + bit_offset.
+  Where bit_offset is the bit offset within the register.
+
+  For example on STM32MP1, for LTDC reset:
+     ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset
+          = 0x180 / 4 * 32 + 0 = 3072
+
+  The list of valid indices for STM32MP1 is available in:
+  include/dt-bindings/reset-controller/stm32mp1-resets.h
+
+  This file implements defines like:
+  #define LTDC_R	3072
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    items:
+      - const: st,stm32mp1-rcc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rcc: rcc@50000000 {
+        compatible = "st,stm32mp1-rcc", "syscon";
+        reg = <0x50000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+...
diff --git a/dts/Bindings/clock/sun8i-de2.txt b/dts/Bindings/clock/sun8i-de2.txt
deleted file mode 100644
index 41a52c2acf..0000000000
--- a/dts/Bindings/clock/sun8i-de2.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Allwinner Display Engine 2.0/3.0 Clock Control Binding
-------------------------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun8i-a83t-de2-clk"
-		- "allwinner,sun8i-h3-de2-clk"
-		- "allwinner,sun8i-v3s-de2-clk"
-		- "allwinner,sun50i-a64-de2-clk"
-		- "allwinner,sun50i-h5-de2-clk"
-		- "allwinner,sun50i-h6-de3-clk"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the display engine subsystem.
-	  Three are needed:
-  - "mod": the display engine module clock (on A83T it's the DE PLL)
-  - "bus": the bus clock for the whole display engine subsystem
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset control for the display engine subsystem.
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-de2_clocks: clock@1000000 {
-	compatible = "allwinner,sun8i-h3-de2-clk";
-	reg = <0x01000000 0x100000>;
-	clocks = <&ccu CLK_BUS_DE>,
-		 <&ccu CLK_DE>;
-	clock-names = "bus",
-		      "mod";
-	resets = <&ccu RST_BUS_DE>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/dts/Bindings/clock/sun9i-de.txt b/dts/Bindings/clock/sun9i-de.txt
deleted file mode 100644
index fb18f327b9..0000000000
--- a/dts/Bindings/clock/sun9i-de.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Allwinner A80 Display Engine Clock Control Binding
---------------------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-de-clks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the display engine subsystem.
-	  Three are needed:
-  - "mod": the display engine module clock
-  - "dram": the DRAM bus clock for the system
-  - "bus": the bus clock for the whole display engine subsystem
-- clock-names: Must contain the clock names described just above
-- resets: phandle to the reset control for the display engine subsystem.
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-de_clocks: clock@3000000 {
-	compatible = "allwinner,sun9i-a80-de-clks";
-	reg = <0x03000000 0x30>;
-	clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
-	clock-names = "mod", "dram", "bus";
-	resets = <&ccu RST_BUS_DE>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/dts/Bindings/clock/sun9i-usb.txt b/dts/Bindings/clock/sun9i-usb.txt
deleted file mode 100644
index 3564bd4f2a..0000000000
--- a/dts/Bindings/clock/sun9i-usb.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Allwinner A80 USB Clock Control Binding
----------------------------------------
-
-Required properties :
-- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-usb-clocks"
-
-- reg: Must contain the registers base address and length
-- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
-  - "bus": the bus clock for the whole USB subsystem
-  - "hosc": the high frequency oscillator (usually at 24MHz)
-- clock-names: Must contain the clock names described just above
-- #clock-cells : must contain 1
-- #reset-cells : must contain 1
-
-Example:
-usb_clocks: clock@a08000 {
-	compatible = "allwinner,sun9i-a80-usb-clks";
-	reg = <0x00a08000 0x8>;
-	clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
-	clock-names = "bus", "hosc";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/dts/Bindings/clock/sunxi.txt b/dts/Bindings/clock/sunxi.txt
deleted file mode 100644
index 1a042e20b1..0000000000
--- a/dts/Bindings/clock/sunxi.txt
+++ /dev/null
@@ -1,225 +0,0 @@
-Device Tree Clock bindings for arch-sunxi
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be one of the following:
-	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
-	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
-	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
-	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
-	"allwinner,sun4i-a10-pll3-clk" - for the video PLL clock on A10
-	"allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80
-	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
-	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
-	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
-	"allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80
-	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
-	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
-	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
-	"allwinner,sun4i-a10-gates-clk" - for generic gates on all compatible SoCs
-	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
-	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
-	"allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13
-	"allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80
-	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
-	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
-	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
-	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
-	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
-	"allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80
-	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
-	"allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3
-	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
-	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
-	"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
-	"allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80
-	"allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80
-	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
-	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
-	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
-	"allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
-	"allwinner,sun8i-a83t-apb0-gates-clk" - for the APB0 gates on A83T
-	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
-	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
-	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
-	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
-	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
-	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
-	"allwinner,sun8i-h3-apb0-gates-clk" - for the APB0 gates on H3
-	"allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80
-	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
-	"allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
-	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
-	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
-	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
-	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
-	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
-	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
-	"allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
-	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
-	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
-	"allwinner,sun8i-a83t-bus-gates-clk" - for the bus gates on A83T
-	"allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3
-	"allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80
-	"allwinner,sun4i-a10-display-clk" - for the display clocks on the A10
-	"allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10
-	"allwinner,sun5i-a13-dram-gates-clk" - for the DRAM gates on A13
-	"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
-	"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
-	"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
-	"allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
-	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
-	"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
-	"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
-	"allwinner,sun7i-a20-out-clk" - for the external output clocks
-	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
-	"allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10
-	"allwinner,sun4i-a10-tcon-ch1-clk" - for the TCON channel 1 clock on the A10
-	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
-	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
-	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
-	"allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
-	"allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
-	"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
-	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
-	"allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
-	"allwinner,sun6i-a31-display-clk" - for the display clocks
-
-Required properties for all clocks:
-- reg : shall be the control register address for the clock.
-- clocks : shall be the input parent clock(s) phandle for the clock. For
-	multiplexed clocks, the list order must match the hardware
-	programming order.
-- #clock-cells : from common clock binding; shall be set to 0 except for
-	the following compatibles where it shall be set to 1:
-	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
-	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
-	"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
-	"allwinner,*-mmc-config-clk"
-- clock-output-names : shall be the corresponding names of the outputs.
-	If the clock module only has one output, the name shall be the
-	module name.
-
-And "allwinner,*-usb-clk" clocks also require:
-- reset-cells : shall be set to 1
-
-The "allwinner,sun4i-a10-ve-clk" clock also requires:
-- reset-cells : shall be set to 0
-
-The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
-- #reset-cells : shall be set to 1
-- resets : shall be the reset control phandle for the mmc block.
-
-For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
-dummy clocks at 25 MHz and 125 MHz, respectively. See example.
-
-Clock consumers should specify the desired clocks they use with a
-"clocks" phandle cell. Consumers that are using a gated clock should
-provide an additional ID in their clock property. This ID is the
-offset of the bit controlling this particular gate in the register.
-For the other clocks with "#clock-cells" = 1, the additional ID shall
-refer to the index of the output.
-
-For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
-is the normal PLL6 output, or "pll6". The second output is rate doubled
-PLL6, or "pll6x2".
-
-The "allwinner,*-mmc-clk" clocks have three different outputs: the
-main clock, with the ID 0, and the output and sample clocks, with the
-IDs 1 and 2, respectively.
-
-The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
-per mmc controller. The number of outputs is determined by the size of
-the address block, which is related to the overall mmc block.
-
-For example:
-
-osc24M: clk@1c20050 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-a10-osc-clk";
-	reg = <0x01c20050 0x4>;
-	clocks = <&osc24M_fixed>;
-	clock-output-names = "osc24M";
-};
-
-pll1: clk@1c20000 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-a10-pll1-clk";
-	reg = <0x01c20000 0x4>;
-	clocks = <&osc24M>;
-	clock-output-names = "pll1";
-};
-
-pll5: clk@1c20020 {
-	#clock-cells = <1>;
-	compatible = "allwinner,sun4i-pll5-clk";
-	reg = <0x01c20020 0x4>;
-	clocks = <&osc24M>;
-	clock-output-names = "pll5_ddr", "pll5_other";
-};
-
-pll6: clk@1c20028 {
-	#clock-cells = <1>;
-	compatible = "allwinner,sun6i-a31-pll6-clk";
-	reg = <0x01c20028 0x4>;
-	clocks = <&osc24M>;
-	clock-output-names = "pll6", "pll6x2";
-};
-
-cpu: cpu@1c20054 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-a10-cpu-clk";
-	reg = <0x01c20054 0x4>;
-	clocks = <&osc32k>, <&osc24M>, <&pll1>;
-	clock-output-names = "cpu";
-};
-
-mmc0_clk: clk@1c20088 {
-	#clock-cells = <1>;
-	compatible = "allwinner,sun4i-a10-mmc-clk";
-	reg = <0x01c20088 0x4>;
-	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-	clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
-};
-
-mii_phy_tx_clk: clk@2 {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <25000000>;
-	clock-output-names = "mii_phy_tx";
-};
-
-gmac_int_tx_clk: clk@3 {
-	#clock-cells = <0>;
-	compatible = "fixed-clock";
-	clock-frequency = <125000000>;
-	clock-output-names = "gmac_int_tx";
-};
-
-gmac_clk: clk@1c20164 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun7i-a20-gmac-clk";
-	reg = <0x01c20164 0x4>;
-	/*
-	 * The first clock must be fixed at 25MHz;
-	 * the second clock must be fixed at 125MHz
-	 */
-	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-	clock-output-names = "gmac";
-};
-
-mmc_config_clk: clk@1c13000 {
-	compatible = "allwinner,sun9i-a80-mmc-config-clk";
-	reg = <0x01c13000 0x10>;
-	clocks = <&ahb0_gates 8>;
-	clock-names = "ahb";
-	resets = <&ahb0_resets 8>;
-	reset-names = "ahb";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-	clock-output-names = "mmc0_config", "mmc1_config",
-			     "mmc2_config", "mmc3_config";
-};
diff --git a/dts/Bindings/clock/ti-clkctrl.txt b/dts/Bindings/clock/ti-clkctrl.txt
index 48ee6991f2..18af6b9409 100644
--- a/dts/Bindings/clock/ti-clkctrl.txt
+++ b/dts/Bindings/clock/ti-clkctrl.txt
@@ -16,18 +16,23 @@ For more information, please see the Linux clock framework binding at
 Documentation/devicetree/bindings/clock/clock-bindings.txt.
 
 Required properties :
-- compatible : shall be "ti,clkctrl"
+- compatible : shall be "ti,clkctrl" or a clock domain specific name:
+	       "ti,clkctrl-l4-cfg"
+	       "ti,clkctrl-l4-per"
+	       "ti,clkctrl-l4-secure"
+	       "ti,clkctrl-l4-wkup"
 - #clock-cells : shall contain 2 with the first entry being the instance
 		 offset from the clock domain base and the second being the
 		 clock index
+- reg : clock registers
 
 Example: Clock controller node on omap 4430:
 
 &cm2 {
 	l4per: cm@1400 {
 		cm_l4per@0 {
-			cm_l4per_clkctrl: clk@20 {
-				compatible = "ti,clkctrl";
+			cm_l4per_clkctrl: clock@20 {
+				compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
 				reg = <0x20 0x1b0>;
 				#clock-cells = <2>;
 			};
diff --git a/dts/Bindings/clock/ti/dra7-atl.txt b/dts/Bindings/clock/ti/dra7-atl.txt
index 10f7047755..21c002d28b 100644
--- a/dts/Bindings/clock/ti/dra7-atl.txt
+++ b/dts/Bindings/clock/ti/dra7-atl.txt
@@ -43,7 +43,7 @@ Configuration of ATL instances:
 	- aws : Audio word select signal selection
 };
 
-For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include
+For valid word select signals, see the dt-bindings/clock/ti-dra7-atl.h include
 file.
 
 Examples:
@@ -83,7 +83,7 @@ atl: atl@4843c000 {
 	clock-names = "fck";
 };
 
-#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
 
 &atl {
 
diff --git a/dts/Bindings/clock/xlnx,versal-clk.yaml b/dts/Bindings/clock/xlnx,versal-clk.yaml
new file mode 100644
index 0000000000..229af98b1d
--- /dev/null
+++ b/dts/Bindings/clock/xlnx,versal-clk.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,versal-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal clock controller
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+  - Jolly Shah <jolly.shah@xilinx.com>
+  - Rajan Vaja <rajan.vaja@xilinx.com>
+
+description: |
+  The clock controller is a hardware block of Xilinx versal clock tree. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  provider for all clock consumers of PS clocks.
+
+select: false
+
+properties:
+  compatible:
+    const: xlnx,versal-clk
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: List of clock specifiers which are external input
+      clocks to the given clock controller.
+    items:
+      - description: reference clock
+      - description: alternate reference clock
+      - description: alternate reference clock for programmable logic
+
+  clock-names:
+    items:
+      - const: ref
+      - const: alt_ref
+      - const: pl_alt_ref
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        compatible = "xlnx,zynqmp-firmware";
+        method = "smc";
+        versal_clk: clock-controller {
+          #clock-cells = <1>;
+          compatible = "xlnx,versal-clk";
+          clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
+          clock-names = "ref", "alt_ref", "pl_alt_ref";
+        };
+      };
+    };
+...
diff --git a/dts/Bindings/connector/usb-connector.txt b/dts/Bindings/connector/usb-connector.txt
index d357987181..88578ac1a8 100644
--- a/dts/Bindings/connector/usb-connector.txt
+++ b/dts/Bindings/connector/usb-connector.txt
@@ -1,8 +1,8 @@
 USB Connector
 =============
 
-USB connector node represents physical USB connector. It should be
-a child of USB interface controller.
+A USB connector node represents a physical USB connector. It should be
+a child of a USB interface controller.
 
 Required properties:
 - compatible: describes type of the connector, must be one of:
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml
new file mode 100644
index 0000000000..86057d5410
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -0,0 +1,291 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Backend Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine backend exposes layers and sprites to the system.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-backend
+      - allwinner,sun5i-a13-display-backend
+      - allwinner,sun6i-a31-display-backend
+      - allwinner,sun7i-a20-display-backend
+      - allwinner,sun8i-a23-display-backend
+      - allwinner,sun8i-a33-display-backend
+      - allwinner,sun9i-a80-display-backend
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Display Backend registers
+      - description: SAT registers
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: be
+      - const: sat
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+    items:
+      - description: The backend interface clock
+      - description: The backend module clock
+      - description: The backend DRAM clock
+      - description: The SAT clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+      - const: sat
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: The Backend reset line
+      - description: The SAT reset line
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: be
+      - const: sat
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-a33-display-backend
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+  required:
+    - reg-names
+    - reset-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 1
+
+    reset-names:
+      maxItems: 1
+
+examples:
+  - |
+    /*
+     * This comes from the clock/sun4i-a10-ccu.h and
+     * reset/sun4i-a10-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_AHB_DE_BE0	42
+    #define CLK_DRAM_DE_BE0	140
+    #define CLK_DE_BE0		144
+    #define RST_DE_BE0		5
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun4i-a10-display-backend";
+        reg = <0x01e60000 0x10000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+                 <&ccu CLK_DRAM_DE_BE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_BE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&fe1_out_be0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_be0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_be0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a23-a33-ccu.h and
+     * reset/sun8i-a23-a33-ccu.h headers, but we can't include them
+     * since it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_DE_BE	40
+    #define CLK_BUS_SAT		46
+    #define CLK_DRAM_DE_BE	84
+    #define CLK_DE_BE		85
+    #define RST_BUS_DE_BE	21
+    #define RST_BUS_SAT		27
+
+    display-backend@1e60000 {
+        compatible = "allwinner,sun8i-a33-display-backend";
+        reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+        reg-names = "be", "sat";
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+                 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+        clock-names = "ahb", "mod",
+                      "ram", "sat";
+        resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+        reset-names = "be", "sat";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&fe0_out_be0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&drc0_in_be0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml
new file mode 100644
index 0000000000..944ff2f1cf
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine pipeline (and its entry point, since it can be
+  either directly the backend or the frontend) is represented as an
+  extra node.
+
+  The Allwinner A10 Display pipeline is composed of several components
+  that are going to be documented below:
+
+  For all connections between components up to the TCONs in the
+  display pipeline, when there are multiple components of the same
+  type at the same depth, the local endpoint ID must be the same as
+  the remote component's index. For example, if the remote endpoint is
+  Frontend 1, then the local endpoint ID must be 1.
+
+  Frontend 0  [0] ------- [0]  Backend 0  [0] ------- [0]  TCON 0
+              [1] --   -- [1]             [1] --   -- [1]
+                    \ /                         \ /
+                     X                           X
+                    / \                         / \
+              [0] --   -- [0]             [0] --   -- [0]
+  Frontend 1  [1] ------- [1]  Backend 1  [1] ------- [1]  TCON 1
+
+  For a two pipeline system such as the one depicted above, the lines
+  represent the connections between the components, while the numbers
+  within the square brackets corresponds to the ID of the local endpoint.
+
+  The same rule also applies to DE 2.0 mixer-TCON connections:
+
+  Mixer 0  [0] ----------- [0]  TCON 0
+           [1] ----   ---- [1]
+                   \ /
+                    X
+                   / \
+           [0] ----   ---- [0]
+  Mixer 1  [1] ----------- [1]  TCON 1
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-engine
+      - allwinner,sun5i-a10s-display-engine
+      - allwinner,sun5i-a13-display-engine
+      - allwinner,sun6i-a31-display-engine
+      - allwinner,sun6i-a31s-display-engine
+      - allwinner,sun7i-a20-display-engine
+      - allwinner,sun8i-a23-display-engine
+      - allwinner,sun8i-a33-display-engine
+      - allwinner,sun8i-a83t-display-engine
+      - allwinner,sun8i-h3-display-engine
+      - allwinner,sun8i-r40-display-engine
+      - allwinner,sun8i-v3s-display-engine
+      - allwinner,sun9i-a80-display-engine
+      - allwinner,sun50i-a64-display-engine
+      - allwinner,sun50i-h6-display-engine
+
+  allwinner,pipelines:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - minItems: 1
+        maxItems: 2
+    description: |
+      Available display engine frontends (DE 1.0) or mixers (DE
+      2.0/3.0) available.
+
+required:
+  - compatible
+  - allwinner,pipelines
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun4i-a10-display-engine
+          - allwinner,sun6i-a31-display-engine
+          - allwinner,sun6i-a31s-display-engine
+          - allwinner,sun7i-a20-display-engine
+          - allwinner,sun8i-a83t-display-engine
+          - allwinner,sun8i-r40-display-engine
+          - allwinner,sun9i-a80-display-engine
+          - allwinner,sun50i-a64-display-engine
+
+then:
+  properties:
+    allwinner,pipelines:
+      minItems: 2
+
+else:
+  properties:
+    allwinner,pipelines:
+      maxItems: 1
+
+examples:
+  - |
+      de: display-engine {
+          compatible = "allwinner,sun4i-a10-display-engine";
+          allwinner,pipelines = <&fe0>, <&fe1>;
+      };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml
new file mode 100644
index 0000000000..3eb1c2bbf4
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Frontend Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The display engine frontend does formats conversion, scaling,
+  deinterlacing and color space conversion.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-display-frontend
+      - allwinner,sun5i-a13-display-frontend
+      - allwinner,sun6i-a31-display-frontend
+      - allwinner,sun7i-a20-display-frontend
+      - allwinner,sun8i-a23-display-frontend
+      - allwinner,sun8i-a33-display-frontend
+      - allwinner,sun9i-a80-display-frontend
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The frontend interface clock
+      - description: The frontend module clock
+      - description: The frontend DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    fe0: display-frontend@1e00000 {
+        compatible = "allwinner,sun4i-a10-display-frontend";
+        reg = <0x01e00000 0x20000>;
+        interrupts = <47>;
+        clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+                 <&ccu CLK_DRAM_DE_FE0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_DE_FE0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fe0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                fe0_out_be0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_in_fe0>;
+                };
+
+                fe0_out_be1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_in_fe0>;
+                };
+            };
+        };
+    };
+
+
+...
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml b/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml
new file mode 100644
index 0000000000..5d4915aed1
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 HDMI Controller Device Tree Bindings
+
+description: |
+  The HDMI Encoder supports the HDMI video and audio outputs, and does
+  CEC. It is one end of the pipeline.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-hdmi
+      - const: allwinner,sun5i-a10s-hdmi
+      - const: allwinner,sun6i-a31-hdmi
+      - items:
+        - const: allwinner,sun7i-a20-hdmi
+        - const: allwinner,sun5i-a10s-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+        - description: The HDMI interface clock
+        - description: The HDMI module clock
+        - description: The first video PLL
+        - description: The second video PLL
+
+      - items:
+        - description: The HDMI interface clock
+        - description: The HDMI module clock
+        - description: The HDMI DDC clock
+        - description: The first video PLL
+        - description: The second video PLL
+
+  clock-names:
+    oneOf:
+      - items:
+        - const: ahb
+        - const: mod
+        - const: pll-0
+        - const: pll-1
+
+      - items:
+        - const: ahb
+        - const: mod
+        - const: ddc
+        - const: pll-0
+        - const: pll-1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DDC Transmission DMA Channel
+      - description: DDC Reception DMA Channel
+      - description: Audio Transmission DMA Channel
+
+  dma-names:
+    items:
+      - const: ddc-tx
+      - const: ddc-rx
+      - const: audio-tx
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller. Usually an HDMI
+          connector.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun6i-a31-hdmi
+
+then:
+  properties:
+    clocks:
+      minItems: 5
+
+    clock-names:
+      minItems: 5
+
+  required:
+    - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/dma/sun4i-a10.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    hdmi: hdmi@1c16000 {
+        compatible = "allwinner,sun4i-a10-hdmi";
+        reg = <0x01c16000 0x1000>;
+        interrupts = <58>;
+        clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+                 <&ccu CLK_PLL_VIDEO0_2X>,
+                 <&ccu CLK_PLL_VIDEO1_2X>;
+        clock-names = "ahb", "mod", "pll-0", "pll-1";
+        dmas = <&dma SUN4I_DMA_NORMAL 16>,
+               <&dma SUN4I_DMA_NORMAL 16>,
+               <&dma SUN4I_DMA_DEDICATED 24>;
+        dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_in: port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                hdmi_in_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_out_hdmi>;
+                };
+
+                hdmi_in_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_out_hdmi>;
+                };
+            };
+
+            hdmi_out: port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml
new file mode 100644
index 0000000000..86ad617d23
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -0,0 +1,676 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The TCON acts as a timing controller for RGB, LVDS and TV
+  interfaces.
+
+properties:
+  "#clock-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-tcon
+      - const: allwinner,sun5i-a13-tcon
+      - const: allwinner,sun6i-a31-tcon
+      - const: allwinner,sun6i-a31s-tcon
+      - const: allwinner,sun7i-a20-tcon
+      - const: allwinner,sun8i-a23-tcon
+      - const: allwinner,sun8i-a33-tcon
+      - const: allwinner,sun8i-a83t-tcon-lcd
+      - const: allwinner,sun8i-a83t-tcon-tv
+      - const: allwinner,sun8i-r40-tcon-tv
+      - const: allwinner,sun8i-v3s-tcon
+      - const: allwinner,sun9i-a80-tcon-lcd
+      - const: allwinner,sun9i-a80-tcon-tv
+
+      - items:
+        - enum:
+            - allwinner,sun50i-a64-tcon-lcd
+        - const: allwinner,sun8i-a83t-tcon-lcd
+
+      - items:
+        - enum:
+          - allwinner,sun8i-h3-tcon-tv
+          - allwinner,sun50i-a64-tcon-tv
+          - allwinner,sun50i-h6-tcon-tv
+        - const: allwinner,sun8i-a83t-tcon-tv
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/string-array
+      - maxItems: 1
+    description:
+      Name of the LCD pixel clock created.
+
+  dmas:
+    maxItems: 1
+
+  resets:
+    anyOf:
+      - items:
+        - description: TCON Reset Line
+
+      - items:
+        - description: TCON Reset Line
+        - description: TCON LVDS Reset Line
+
+      - items:
+        - description: TCON Reset Line
+        - description: TCON eDP Reset Line
+
+      - items:
+        - description: TCON Reset Line
+        - description: TCON eDP Reset Line
+        - description: TCON LVDS Reset Line
+
+  reset-names:
+    oneOf:
+      - const: lcd
+
+      - items:
+        - const: lcd
+        - const: lvds
+
+      - items:
+        - const: lcd
+        - const: edp
+
+      - items:
+        - const: lcd
+        - const: edp
+        - const: lvds
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+        patternProperties:
+          "^endpoint(@[0-9])$":
+            type: object
+
+            properties:
+              allwinner,tcon-channel:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                description: |
+                  TCON can have 1 or 2 channels, usually with the
+                  first channel being used for the panels interfaces
+                  (RGB, LVDS, etc.), and the second being used for the
+                  outputs that require another controller (TV Encoder,
+                  HDMI, etc.).
+
+                  If that property is present, specifies the TCON
+                  channel the endpoint is associated to. If that
+                  property is not present, the endpoint number will be
+                  used as the channel number.
+
+            unevaluatedProperties: true
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-tcon
+              - allwinner,sun5i-a13-tcon
+              - allwinner,sun7i-a20-tcon
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+            - const: tcon-ch1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+            - const: tcon-ch1
+            - const: lvds-alt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+            - const: lvds-alt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun8i-v3s-tcon
+              - allwinner,sun9i-a80-tcon-lcd
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-a83t-tcon-tv
+              - allwinner,sun8i-r40-tcon-tv
+              - allwinner,sun9i-a80-tcon-tv
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: ahb
+            - const: tcon-ch1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun5i-a13-tcon
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+              - allwinner,sun7i-a20-tcon
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+              - allwinner,sun8i-v3s-tcon
+              - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun4i-a10-tcon
+              - allwinner,sun8i-a83t-tcon-lcd
+
+    then:
+      required:
+        - "#clock-cells"
+        - clock-output-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+              - allwinner,sun8i-a83t-tcon-lcd
+
+    then:
+      properties:
+        resets:
+          minItems: 2
+
+        reset-names:
+          items:
+            - const: lcd
+            - const: lvds
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun9i-a80-tcon-lcd
+
+    then:
+      properties:
+        resets:
+          minItems: 3
+
+        reset-names:
+          items:
+            - const: lcd
+            - const: edp
+            - const: lvds
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun9i-a80-tcon-tv
+
+    then:
+      properties:
+        resets:
+          minItems: 2
+
+        reset-names:
+          items:
+            - const: lcd
+            - const: edp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun4i-a10-tcon
+              - allwinner,sun5i-a13-tcon
+              - allwinner,sun6i-a31-tcon
+              - allwinner,sun6i-a31s-tcon
+              - allwinner,sun7i-a20-tcon
+              - allwinner,sun8i-a23-tcon
+              - allwinner,sun8i-a33-tcon
+
+    then:
+      required:
+        - dmas
+
+examples:
+  - |
+    #include <dt-bindings/dma/sun4i-a10.h>
+
+    /*
+     * This comes from the clock/sun4i-a10-ccu.h and
+     * reset/sun4i-a10-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_AHB_LCD0	56
+    #define CLK_TCON0_CH0	149
+    #define CLK_TCON0_CH1	155
+    #define RST_TCON0		11
+
+    lcd-controller@1c0c000 {
+        compatible = "allwinner,sun4i-a10-tcon";
+        reg = <0x01c0c000 0x1000>;
+        interrupts = <44>;
+        resets = <&ccu RST_TCON0>;
+        reset-names = "lcd";
+        clocks = <&ccu CLK_AHB_LCD0>,
+                 <&ccu CLK_TCON0_CH0>,
+                 <&ccu CLK_TCON0_CH1>;
+        clock-names = "ahb",
+                      "tcon-ch0",
+                      "tcon-ch1";
+        clock-output-names = "tcon0-pixel-clock";
+        #clock-cells = <0>;
+        dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_out_tcon0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&hdmi_in_tcon0>;
+                    allwinner,tcon-channel = <1>;
+                };
+            };
+        };
+    };
+
+    #undef CLK_AHB_LCD0
+    #undef CLK_TCON0_CH0
+    #undef CLK_TCON0_CH1
+    #undef RST_TCON0
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun6i-a31-ccu.h and
+     * reset/sun6i-a31-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_PLL_MIPI	15
+    #define CLK_AHB1_LCD0	47
+    #define CLK_LCD0_CH0	127
+    #define CLK_LCD0_CH1	129
+    #define RST_AHB1_LCD0	27
+    #define RST_AHB1_LVDS	41
+
+    lcd-controller@1c0c000 {
+        compatible = "allwinner,sun6i-a31-tcon";
+        reg = <0x01c0c000 0x1000>;
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma 11>;
+        resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>;
+        reset-names = "lcd", "lvds";
+        clocks = <&ccu CLK_AHB1_LCD0>,
+                 <&ccu CLK_LCD0_CH0>,
+                 <&ccu CLK_LCD0_CH1>,
+                 <&ccu CLK_PLL_MIPI>;
+        clock-names = "ahb",
+                      "tcon-ch0",
+                      "tcon-ch1",
+                      "lvds-alt";
+        clock-output-names = "tcon0-pixel-clock";
+        #clock-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&drc0_out_tcon0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&drc1_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&hdmi_in_tcon0>;
+                    allwinner,tcon-channel = <1>;
+                };
+            };
+        };
+    };
+
+    #undef CLK_PLL_MIPI
+    #undef CLK_AHB1_LCD0
+    #undef CLK_LCD0_CH0
+    #undef CLK_LCD0_CH1
+    #undef RST_AHB1_LCD0
+    #undef RST_AHB1_LVDS
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun9i-a80-ccu.h and
+     * reset/sun9i-a80-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_LCD0	102
+    #define CLK_LCD0		58
+    #define RST_BUS_LCD0	22
+    #define RST_BUS_EDP		24
+    #define RST_BUS_LVDS	25
+
+    lcd-controller@3c00000 {
+        compatible = "allwinner,sun9i-a80-tcon-lcd";
+        reg = <0x03c00000 0x10000>;
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+        clock-names = "ahb", "tcon-ch0";
+        resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>;
+        reset-names = "lcd", "edp", "lvds";
+        clock-output-names = "tcon0-pixel-clock";
+        #clock-cells = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&drc0_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    #undef CLK_BUS_TCON0
+    #undef CLK_TCON0
+    #undef RST_BUS_TCON0
+    #undef RST_BUS_EDP
+    #undef RST_BUS_LVDS
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a83t-ccu.h and
+     * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_TCON0	36
+    #define CLK_TCON0		85
+    #define RST_BUS_TCON0	22
+    #define RST_BUS_LVDS	31
+
+    lcd-controller@1c0c000 {
+        compatible = "allwinner,sun8i-a83t-tcon-lcd";
+        reg = <0x01c0c000 0x1000>;
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+        clock-names = "ahb", "tcon-ch0";
+        clock-output-names = "tcon-pixel-clock";
+        #clock-cells = <0>;
+        resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+        reset-names = "lcd", "lvds";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mixer0_out_tcon0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mixer1_out_tcon0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    #undef CLK_BUS_TCON0
+    #undef CLK_TCON0
+    #undef RST_BUS_TCON0
+    #undef RST_BUS_LVDS
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-r40-ccu.h and
+     * reset/sun8i-r40-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+
+    #define CLK_BUS_TCON_TV0	73
+    #define RST_BUS_TCON_TV0	49
+
+    tcon_tv0: lcd-controller@1c73000 {
+        compatible = "allwinner,sun8i-r40-tcon-tv";
+        reg = <0x01c73000 0x1000>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+        clock-names = "ahb", "tcon-ch1";
+        resets = <&ccu RST_BUS_TCON_TV0>;
+        reset-names = "lcd";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+                };
+            };
+
+            tcon_tv0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+                };
+            };
+        };
+    };
+
+    #undef CLK_BUS_TCON_TV0
+    #undef RST_BUS_TCON_TV0
+
+...
diff --git a/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
new file mode 100644
index 0000000000..5d5d396651
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TV Encoder Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun4i-a10-tv-encoder
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt. The
+      first port should be the input endpoint, usually coming from the
+      associated TCON.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    tve0: tv-encoder@1c0a000 {
+        compatible = "allwinner,sun4i-a10-tv-encoder";
+        reg = <0x01c0a000 0x1000>;
+        clocks = <&ahb_gates 34>;
+        resets = <&tcon_ch0_clk 0>;
+
+        port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            tve0_in_tcon0: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&tcon0_out_tve0>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml b/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml
new file mode 100644
index 0000000000..0c1ce55940
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The DRC (Dynamic Range Controller) allows to dynamically adjust
+  pixel brightness/contrast based on histogram measurements for LCD
+  content adaptive backlight control.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-drc
+      - allwinner,sun6i-a31s-drc
+      - allwinner,sun8i-a23-drc
+      - allwinner,sun8i-a33-drc
+      - allwinner,sun9i-a80-drc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DRC interface clock
+      - description: The DRC module clock
+      - description: The DRC DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+    #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+    drc0: drc@1e70000 {
+        compatible = "allwinner,sun6i-a31-drc";
+        reg = <0x01e70000 0x10000>;
+        interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+                 <&ccu CLK_DRAM_DRC0>;
+        clock-names = "ahb", "mod",
+                      "ram";
+        resets = <&ccu RST_AHB1_DRC0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            drc0_in: port@0 {
+                reg = <0>;
+
+                drc0_in_be0: endpoint {
+                    remote-endpoint = <&be0_out_drc0>;
+                };
+            };
+
+            drc0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                drc0_out_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_drc0>;
+                };
+
+                drc0_out_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_drc0>;
+                };
+            };
+        };
+    };
+
+
+...
diff --git a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index 0f7074977c..9e90c2b009 100644
--- a/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/dts/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -15,7 +15,9 @@ properties:
   "#size-cells": true
 
   compatible:
-    const: allwinner,sun6i-a31-mipi-dsi
+    enum:
+      - allwinner,sun6i-a31-mipi-dsi
+      - allwinner,sun50i-a64-mipi-dsi
 
   reg:
     maxItems: 1
@@ -24,6 +26,8 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 1
+    maxItems: 2
     items:
       - description: Bus Clock
       - description: Module Clock
@@ -63,13 +67,38 @@ required:
   - reg
   - interrupts
   - clocks
-  - clock-names
   - phys
   - phy-names
   - resets
   - vcc-dsi-supply
   - port
 
+allOf:
+  - if:
+      properties:
+         compatible:
+           contains:
+             const: allwinner,sun6i-a31-mipi-dsi
+
+    then:
+        properties:
+          clocks:
+            minItems: 2
+
+        required:
+          - clock-names
+
+  - if:
+      properties:
+         compatible:
+           contains:
+             const: allwinner,sun50i-a64-mipi-dsi
+
+    then:
+        properties:
+          clocks:
+            minItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
new file mode 100644
index 0000000000..1dee641e3e
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-de2-mixer-0
+      - allwinner,sun8i-a83t-de2-mixer-1
+      - allwinner,sun8i-h3-de2-mixer-0
+      - allwinner,sun8i-r40-de2-mixer-0
+      - allwinner,sun8i-r40-de2-mixer-1
+      - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun50i-a64-de2-mixer-0
+      - allwinner,sun50i-a64-de2-mixer-1
+      - allwinner,sun50i-h6-de3-mixer-0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The mixer interface clock
+      - description: The mixer module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-de2.h>
+    #include <dt-bindings/reset/sun8i-de2.h>
+
+    mixer0: mixer@1100000 {
+        compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+        reg = <0x01100000 0x100000>;
+        clocks = <&display_clocks CLK_BUS_MIXER0>,
+                 <&display_clocks CLK_MIXER0>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&display_clocks RST_MIXER0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mixer0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mixer0_out_tcon0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&tcon0_in_mixer0>;
+                };
+
+                mixer0_out_tcon1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&tcon1_in_mixer0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
new file mode 100644
index 0000000000..4d6795690a
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
+
+description: |
+  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
+  IP with Allwinner\'s own PHY IP. It supports audio and video outputs
+  and CEC.
+
+  These DT bindings follow the Synopsys DWC HDMI TX bindings defined
+  in Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with
+  the following device-specific properties.
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-dw-hdmi
+      - const: allwinner,sun50i-h6-dw-hdmi
+
+      - items:
+        - enum:
+          - allwinner,sun8i-h3-dw-hdmi
+          - allwinner,sun8i-r40-dw-hdmi
+          - allwinner,sun50i-a64-dw-hdmi
+        - const: allwinner,sun8i-a83t-dw-hdmi
+
+  reg:
+    maxItems: 1
+
+  reg-io-width:
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+    items:
+      - description: Bus Clock
+      - description: Register Clock
+      - description: TMDS Clock
+      - description: HDMI CEC Clock
+      - description: HDCP Clock
+      - description: HDCP Bus Clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+    items:
+      - const: iahb
+      - const: isfr
+      - const: tmds
+      - const: cec
+      - const: hdcp
+      - const: hdcp-bus
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: HDMI Controller Reset
+      - description: HDCP Reset
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: ctrl
+      - const: hdcp
+
+  phys:
+    maxItems: 1
+    description:
+      Phandle to the DWC HDMI PHY.
+
+  phy-names:
+    const: phy
+
+  hvcc-supply:
+    description:
+      The VCC power supply of the controller
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller. Usually the associated
+          TCON.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller. Usually an HDMI
+          connector.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-io-width
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - phys
+  - phy-names
+  - ports
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-h6-dw-hdmi
+
+then:
+  properties:
+    clocks:
+      minItems: 6
+
+    clock-names:
+      minItems: 6
+
+    resets:
+      minItems: 2
+
+    reset-names:
+      minItems: 2
+
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun8i-a83t-ccu.h and
+     * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+    #define CLK_BUS_HDMI	39
+    #define CLK_HDMI		93
+    #define CLK_HDMI_SLOW	94
+    #define RST_BUS_HDMI1	26
+
+    hdmi@1ee0000 {
+        compatible = "allwinner,sun8i-a83t-dw-hdmi";
+        reg = <0x01ee0000 0x10000>;
+        reg-io-width = <1>;
+        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                 <&ccu CLK_HDMI>;
+        clock-names = "iahb", "isfr", "tmds";
+        resets = <&ccu RST_BUS_HDMI1>;
+        reset-names = "ctrl";
+        phys = <&hdmi_phy>;
+        phy-names = "phy";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pins>;
+        status = "disabled";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&tcon1_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+    /* Cleanup after ourselves */
+    #undef CLK_BUS_HDMI
+    #undef CLK_HDMI
+    #undef CLK_HDMI_SLOW
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    /*
+     * This comes from the clock/sun50i-h6-ccu.h and
+     * reset/sun50i-h6-ccu.h headers, but we can't include them since
+     * it would trigger a bunch of warnings for redefinitions of
+     * symbols with the other example.
+     */
+    #define CLK_BUS_HDMI	126
+    #define CLK_BUS_HDCP	137
+    #define CLK_HDMI		123
+    #define CLK_HDMI_SLOW	124
+    #define CLK_HDMI_CEC	125
+    #define CLK_HDCP		136
+    #define RST_BUS_HDMI_SUB	57
+    #define RST_BUS_HDCP	62
+
+    hdmi@6000000 {
+        compatible = "allwinner,sun50i-h6-dw-hdmi";
+        reg = <0x06000000 0x10000>;
+        reg-io-width = <1>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+                 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+                 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+        clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+                      "hdcp-bus";
+        resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+        reset-names = "ctrl", "hdcp";
+        phys = <&hdmi_phy>;
+        phy-names = "phy";
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_pins>;
+        status = "disabled";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
new file mode 100644
index 0000000000..501cec1616
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t HDMI PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-hdmi-phy
+      - allwinner,sun8i-h3-hdmi-phy
+      - allwinner,sun8i-r40-hdmi-phy
+      - allwinner,sun50i-a64-hdmi-phy
+      - allwinner,sun50i-h6-hdmi-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: Parent of the PHY clock
+      - description: Second possible parent of the PHY clock
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      - const: bus
+      - const: mod
+      - const: pll-0
+      - const: pll-1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun8i-r40-hdmi-phy
+
+then:
+  properties:
+    clocks:
+      minItems: 4
+
+    clock-names:
+      minItems: 4
+
+else:
+  if:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun8i-h3-hdmi-phy
+            - allwinner,sun50i-a64-hdmi-phy
+
+  then:
+    properties:
+      clocks:
+        minItems: 3
+
+      clock-names:
+        minItems: 3
+
+  else:
+    properties:
+      clocks:
+        maxItems: 2
+
+      clock-names:
+        maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    hdmi_phy: hdmi-phy@1ef0000 {
+        compatible = "allwinner,sun8i-a83t-hdmi-phy";
+        reg = <0x01ef0000 0x10000>;
+        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_HDMI0>;
+        reset-names = "phy";
+        #phy-cells = <0>;
+    };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml
new file mode 100644
index 0000000000..b98ca60982
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 TCON TOP Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  TCON TOPs main purpose is to configure whole display pipeline. It
+  determines relationships between mixers and TCONs, selects source
+  TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV
+  encoder clock source and contains additional TV TCON and DSI gates.
+
+  It allows display pipeline to be configured in very different ways:
+
+                                  / LCD0/LVDS0
+                   / [0] TCON-LCD0
+                   |              \ MIPI DSI
+   mixer0          |
+          \        / [1] TCON-LCD1 - LCD1/LVDS1
+           TCON-TOP
+          /        \ [2] TCON-TV0 [0] - TVE0/RGB
+   mixer1          |                  \
+                   |                   TCON-TOP - HDMI
+                   |                  /
+                   \ [3] TCON-TV1 [1] - TVE1/RGB
+
+  Note that both TCON TOP references same physical unit. Both mixers
+  can be connected to any TCON. Not all TCON TOP variants support all
+  features.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun50i-h6-tcon-top
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 6
+    items:
+      - description: The TCON TOP interface clock
+      - description: The TCON TOP TV0 clock
+      - description: The TCON TOP TVE0 clock
+      - description: The TCON TOP TV1 clock
+      - description: The TCON TOP TVE1 clock
+      - description: The TCON TOP MIPI DSI clock
+
+  clock-names:
+    minItems: 2
+    maxItems: 6
+    items:
+      - const: bus
+      - const: tcon-tv0
+      - const: tve0
+      - const: tcon-tv1
+      - const: tve1
+      - const: dsi
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 3
+    description: >
+      The first item is the name of the clock created for the TV0
+      channel, the second item is the name of the TCON TV1 channel
+      clock and the third one is the name of the DSI channel clock.
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      All ports should have only one endpoint connected to
+      remote endpoint.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoint for Mixer 0 mux.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoint for Mixer 0 mux
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+          reg: true
+
+        patternProperties:
+          "^endpoint@[0-9]$":
+            type: object
+
+            properties:
+              reg:
+                description: |
+                  ID of the target TCON
+
+            required:
+              - reg
+
+        required:
+          - "#address-cells"
+          - "#size-cells"
+
+        additionalProperties: false
+
+      port@2:
+        type: object
+        description: |
+          Input endpoint for Mixer 1 mux.
+
+      port@3:
+        type: object
+        description: |
+          Output endpoint for Mixer 1 mux
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+          reg: true
+
+        patternProperties:
+          "^endpoint@[0-9]$":
+            type: object
+
+            properties:
+              reg:
+                description: |
+                  ID of the target TCON
+
+            required:
+              - reg
+
+        required:
+          - "#address-cells"
+          - "#size-cells"
+
+        additionalProperties: false
+
+      port@4:
+        type: object
+        description: |
+          Input endpoint for HDMI mux.
+
+        properties:
+          "#address-cells":
+            const: 1
+
+          "#size-cells":
+            const: 0
+
+          reg: true
+
+        patternProperties:
+          "^endpoint@[0-9]$":
+            type: object
+
+            properties:
+              reg:
+                description: |
+                  ID of the target TCON
+
+            required:
+              - reg
+
+        required:
+          - "#address-cells"
+          - "#size-cells"
+
+        additionalProperties: false
+
+      port@5:
+        type: object
+        description: |
+          Output endpoint for HDMI mux
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+      - port@4
+      - port@5
+
+    additionalProperties: false
+
+required:
+  - "#clock-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun50i-h6-tcon-top
+
+then:
+  properties:
+    clocks:
+      maxItems: 2
+
+    clock-output-names:
+      maxItems: 1
+
+else:
+  properties:
+    clocks:
+      minItems: 6
+
+    clock-output-names:
+      minItems: 3
+
+    ports:
+      required:
+        - port@2
+        - port@3
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+      tcon_top: tcon-top@1c70000 {
+          compatible = "allwinner,sun8i-r40-tcon-top";
+          reg = <0x01c70000 0x1000>;
+          clocks = <&ccu CLK_BUS_TCON_TOP>,
+                   <&ccu CLK_TCON_TV0>,
+                   <&ccu CLK_TVE0>,
+                   <&ccu CLK_TCON_TV1>,
+                   <&ccu CLK_TVE1>,
+                   <&ccu CLK_DSI_DPHY>;
+          clock-names = "bus",
+                        "tcon-tv0",
+                        "tve0",
+                        "tcon-tv1",
+                        "tve1",
+                        "dsi";
+          clock-output-names = "tcon-top-tv0",
+                               "tcon-top-tv1",
+                               "tcon-top-dsi";
+          resets = <&ccu RST_BUS_TCON_TOP>;
+          #clock-cells = <1>;
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              tcon_top_mixer0_in: port@0 {
+                  reg = <0>;
+
+                  tcon_top_mixer0_in_mixer0: endpoint {
+                      remote-endpoint = <&mixer0_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_mixer0_out: port@1 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <1>;
+
+                  tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+                      reg = <0>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+                      reg = <1>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+                      reg = <2>;
+                      remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+                  };
+
+                  tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+                      reg = <3>;
+                      remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+                  };
+              };
+
+              tcon_top_mixer1_in: port@2 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <2>;
+
+                  tcon_top_mixer1_in_mixer1: endpoint@1 {
+                      reg = <1>;
+                      remote-endpoint = <&mixer1_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_mixer1_out: port@3 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <3>;
+
+                  tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+                      reg = <0>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+                      reg = <1>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+                      reg = <2>;
+                      remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+                  };
+
+                  tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+                      reg = <3>;
+                      remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+                  };
+              };
+
+              tcon_top_hdmi_in: port@4 {
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  reg = <4>;
+
+                  tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+                      reg = <0>;
+                      remote-endpoint = <&tcon_tv0_out_tcon_top>;
+                  };
+
+                  tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+                      reg = <1>;
+                      remote-endpoint = <&tcon_tv1_out_tcon_top>;
+                  };
+              };
+
+              tcon_top_hdmi_out: port@5 {
+                  reg = <5>;
+
+                  tcon_top_hdmi_out_hdmi: endpoint {
+                      remote-endpoint = <&hdmi_in_tcon_top>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml b/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml
new file mode 100644
index 0000000000..96de41d32b
--- /dev/null
+++ b/dts/Bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
+  can sharpen the display content in both luma and chroma channels.
+
+properties:
+  compatible:
+    const: allwinner,sun9i-a80-deu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The DEU interface clock
+      - description: The DEU module clock
+      - description: The DEU DRAM clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description: |
+      A ports node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        type: object
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    #include <dt-bindings/clock/sun9i-a80-de.h>
+    #include <dt-bindings/reset/sun9i-a80-de.h>
+
+    deu0: deu@3300000 {
+        compatible = "allwinner,sun9i-a80-deu";
+        reg = <0x03300000 0x40000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&de_clocks CLK_BUS_DEU0>,
+                 <&de_clocks CLK_IEP_DEU0>,
+                 <&de_clocks CLK_DRAM_DEU0>;
+        clock-names = "ahb",
+                      "mod",
+                      "ram";
+        resets = <&de_clocks RST_DEU0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            deu0_in: port@0 {
+                reg = <0>;
+
+                deu0_in_fe0: endpoint {
+                    remote-endpoint = <&fe0_out_deu0>;
+                };
+            };
+
+            deu0_out: port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                deu0_out_be0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&be0_in_deu0>;
+                };
+
+                deu0_out_be1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&be1_in_deu0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/bridge/lvds-codec.yaml b/dts/Bindings/display/bridge/lvds-codec.yaml
new file mode 100644
index 0000000000..8f373029f5
--- /dev/null
+++ b/dts/Bindings/display/bridge/lvds-codec.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Transparent LVDS encoders and decoders
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding supports transparent LVDS encoders and decoders that don't
+  require any configuration.
+
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS panels. This binding targets devices compatible with the following
+  specifications only.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Those devices have been marketed under the FPD-Link and FlatLink brand names
+  among others.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - ti,ds90c185       # For the TI DS90C185 FPD-Link Serializer
+          - ti,ds90c187       # For the TI DS90C187 FPD-Link Serializer
+          - ti,sn75lvds83     # For the TI SN75LVDS83 FlatLink transmitter
+        - const: lvds-encoder # Generic LVDS encoder compatible fallback
+      - items:
+        - enum:
+          - ti,ds90cf384a     # For the DS90CF384A FPD-Link LVDS Receiver
+        - const: lvds-decoder # Generic LVDS decoders compatible fallback
+      - enum:
+        - thine,thc63lvdm83d  # For the THC63LVDM83D LVDS serializer
+
+  ports:
+    type: object
+    description: |
+      This device has two video ports. Their connections are modeled using the
+      OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description: |
+          For LVDS encoders, port 0 is the parallel input
+          For LVDS decoders, port 0 is the LVDS input
+
+      port@1:
+        type: object
+        description: |
+          For LVDS encoders, port 1 is the LVDS output
+          For LVDS decoders, port 1 is the parallel output
+
+    required:
+      - port@0
+      - port@1
+
+  powerdown-gpios:
+    description:
+      The GPIO used to control the power down line of this device.
+    maxItems: 1
+
+required:
+  - compatible
+  - ports
+
+examples:
+  - |
+    lvds-encoder {
+      compatible = "ti,ds90c185", "lvds-encoder";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          lvds_enc_in: endpoint {
+            remote-endpoint = <&display_out_rgb>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          lvds_enc_out: endpoint {
+            remote-endpoint = <&lvds_panel_in>;
+          };
+        };
+      };
+    };
+
+  - |
+    lvds-decoder {
+      compatible = "ti,ds90cf384a", "lvds-decoder";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+
+          lvds_dec_in: endpoint {
+            remote-endpoint = <&display_out_lvds>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+
+          lvds_dec_out: endpoint {
+            remote-endpoint = <&rgb_panel_in>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/dts/Bindings/display/bridge/lvds-transmitter.txt b/dts/Bindings/display/bridge/lvds-transmitter.txt
deleted file mode 100644
index 60091db5df..0000000000
--- a/dts/Bindings/display/bridge/lvds-transmitter.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Parallel to LVDS Encoder
-------------------------
-
-This binding supports the parallel to LVDS encoders that don't require any
-configuration.
-
-LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-incompatible data link layers have been used over time to transmit image data
-to LVDS panels. This binding targets devices compatible with the following
-specifications only.
-
-[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-Semiconductor
-[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-Electronics Standards Association (VESA)
-
-Those devices have been marketed under the FPD-Link and FlatLink brand names
-among others.
-
-
-Required properties:
-
-- compatible: Must be "lvds-encoder"
-
-  Any encoder compatible with this generic binding, but with additional
-  properties not listed here, must list a device specific compatible first
-  followed by this generic compatible.
-
-Required nodes:
-
-This device has two video ports. Their connections are modeled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for parallel input
-- Video port 1 for LVDS output
-
-
-Example
--------
-
-lvds-encoder {
-	compatible = "lvds-encoder";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lvds_enc_in: endpoint {
-				remote-endpoint = <&display_out_rgb>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lvds_enc_out: endpoint {
-				remote-endpoint = <&lvds_panel_in>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt b/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt
deleted file mode 100644
index fee3c88e1a..0000000000
--- a/dts/Bindings/display/bridge/thine,thc63lvdm83d.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-THine Electronics THC63LVDM83D LVDS serializer
-----------------------------------------------
-
-The THC63LVDM83D is an LVDS serializer designed to support pixel data
-transmission between a host and a flat panel.
-
-Required properties:
-
-- compatible: Should be "thine,thc63lvdm83d"
-
-Optional properties:
-
-- powerdown-gpios: Power down control GPIO (the /PWDN pin, active low).
-
-Required nodes:
-
-The THC63LVDM83D has two video ports. Their connections are modeled using the
-OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for CMOS/TTL input
-- Video port 1 for LVDS output
-
-
-Example
--------
-
-	lvds_enc: encoder@0 {
-		compatible = "thine,thc63lvdm83d";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_enc_in: endpoint@0 {
-					remote-endpoint = <&rgb_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_enc_out: endpoint@0 {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/dts/Bindings/display/bridge/ti,ds90c185.txt b/dts/Bindings/display/bridge/ti,ds90c185.txt
deleted file mode 100644
index e575f99695..0000000000
--- a/dts/Bindings/display/bridge/ti,ds90c185.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Texas Instruments FPD-Link (LVDS) Serializer
---------------------------------------------
-
-The DS90C185 and DS90C187 are low-power serializers for portable
-battery-powered applications that reduces the size of the RGB
-interface between the host GPU and the display.
-
-Required properties:
-
-- compatible: Should be
-  "ti,ds90c185", "lvds-encoder"  for the TI DS90C185 FPD-Link Serializer
-  "ti,ds90c187", "lvds-encoder"  for the TI DS90C187 FPD-Link Serializer
-
-Optional properties:
-
-- powerdown-gpios: Power down control GPIO (the PDB pin, active-low)
-
-Required nodes:
-
-The devices have two video ports. Their connections are modeled using the OF
-graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-- Video port 0 for parallel input
-- Video port 1 for LVDS output
-
-
-Example
--------
-
-lvds-encoder {
-	compatible = "ti,ds90c185", "lvds-encoder";
-
-	powerdown-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lvds_enc_in: endpoint {
-				remote-endpoint = <&lcdc_out_rgb>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lvds_enc_out: endpoint {
-				remote-endpoint = <&lvds_panel_in>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/display/dsi-controller.yaml b/dts/Bindings/display/dsi-controller.yaml
new file mode 100644
index 0000000000..fd986c36c7
--- /dev/null
+++ b/dts/Bindings/display/dsi-controller.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for DSI Display Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to DSI, Display
+  Serial Interface controllers and attached panels. It doesn't constitute
+  a device tree binding specification by itself but is meant to be referenced
+  by device tree bindings.
+
+  When referenced from panel device tree bindings the properties defined in
+  this document are defined as follows. The panel device tree bindings are
+  responsible for defining whether each property is required or optional.
+
+  Notice: this binding concerns DSI panels connected directly to a master
+  without any intermediate port graph to the panel. Each DSI master
+  can control one to four virtual channels to one panel. Each virtual
+  channel should have a node "panel" for their virtual channel with their
+  reg-property set to the virtual channel number, usually there is just
+  one virtual channel, number 0.
+
+properties:
+  $nodename:
+    pattern: "^dsi-controller(@.*)?$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^panel@[0-3]$":
+    description: Panels connected to the DSI link
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 3
+        description:
+          The virtual channel number of a DSI peripheral. Must be in the range
+          from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI
+          peripherals respond to more than a single virtual channel. In that
+          case the reg property can take multiple entries, one for each virtual
+          channel that the peripheral responds to.
+
+      clock-master:
+        type: boolean
+        description:
+           Should be enabled if the host is being used in conjunction with
+           another DSI host to drive the same peripheral. Hardware supporting
+           such a configuration generally requires the data on both the busses
+           to be driven by the same clock. Only the DSI host instance
+           controlling this clock should contain this property.
+
+      enforce-video-mode:
+        type: boolean
+        description:
+          The best option is usually to run a panel in command mode, as this
+          gives better control over the panel hardware. However for different
+          reasons like broken hardware, missing features or testing, it may be
+          useful to be able to force a command mode-capable panel into video
+          mode.
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi-controller@a0351000 {
+        reg = <0xa0351000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&ab8500_ldo_aux1_reg>;
+            reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/ingenic,lcd.txt b/dts/Bindings/display/ingenic,lcd.txt
index 7b536c8c6d..01e3261def 100644
--- a/dts/Bindings/display/ingenic,lcd.txt
+++ b/dts/Bindings/display/ingenic,lcd.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible: one of:
   * ingenic,jz4740-lcd
   * ingenic,jz4725b-lcd
+  * ingenic,jz4770-lcd
 - reg: LCD registers location and length
 - clocks: LCD pixclock and device clock specifiers.
 	   The device clock is only required on the JZ4740.
diff --git a/dts/Bindings/display/msm/dpu.txt b/dts/Bindings/display/msm/dpu.txt
index a61dd40f37..551ae26f60 100644
--- a/dts/Bindings/display/msm/dpu.txt
+++ b/dts/Bindings/display/msm/dpu.txt
@@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
 
 MDSS:
 Required properties:
-- compatible: "qcom,sdm845-mdss"
+- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
 - reg: physical base address and length of contoller's registers.
 - reg-names: register region names. The following region is required:
   * "mdss"
@@ -41,7 +41,7 @@ Optional properties:
 
 MDP:
 Required properties:
-- compatible: "qcom,sdm845-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
 - reg: physical base address and length of controller's registers.
 - reg-names : register region names. The following region is required:
   * "mdp"
diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt
index 2b8fd26c43..7edc298a15 100644
--- a/dts/Bindings/display/msm/gpu.txt
+++ b/dts/Bindings/display/msm/gpu.txt
@@ -23,13 +23,18 @@ Required properties:
 - iommus: optional phandle to an adreno iommu instance
 - operating-points-v2: optional phandle to the OPP operating points
 - interconnects: optional phandle to an interconnect provider.  See
-  ../interconnect/interconnect.txt for details.
+  ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
+  will have two paths; all others will have one path.
+- interconnect-names: The names of the interconnect paths that correspond to the
+  interconnects property. Values must be gfx-mem and ocmem.
 - qcom,gmu: For GMU attached devices a phandle to the GMU device that will
   control the power for the GPU. Applicable targets:
     - qcom,adreno-630.2
 - zap-shader: For a5xx and a6xx devices this node contains a memory-region that
   points to reserved memory to store the zap shader that can be used to help
   bring the GPU out of secure mode.
+- firmware-name: optional property of the 'zap-shader' node, listing the
+  relative path of the device specific zap firmware.
 
 Example 3xx/4xx/a5xx:
 
@@ -76,11 +81,13 @@ Example a6xx (with GMU):
 		operating-points-v2 = <&gpu_opp_table>;
 
 		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+		interconnect-names = "gfx-mem";
 
 		qcom,gmu = <&gmu>;
 
 		zap-shader {
 			memory-region = <&zap_shader_region>;
+			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
 		};
 	};
 };
diff --git a/dts/Bindings/display/mxsfb.txt b/dts/Bindings/display/mxsfb.txt
index 472e1ea6c5..c985871c46 100644
--- a/dts/Bindings/display/mxsfb.txt
+++ b/dts/Bindings/display/mxsfb.txt
@@ -6,6 +6,7 @@ Required properties:
 - compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
 		Should be "fsl,imx28-lcdif" for i.MX28.
 		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+		Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
 - reg:		Address and length of the register set for LCDIF
 - interrupts:	Should contain LCDIF interrupt
 - clocks:	A list of phandle + clock-specifier pairs, one for each
diff --git a/dts/Bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml b/dts/Bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml
deleted file mode 100644
index c6e33e7f36..0000000000
--- a/dts/Bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml
+++ /dev/null
@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/ampire,am-480272h3tmqw-t01h.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
-
-maintainers:
-  - Yannick Fertre <yannick.fertre@st.com>
-  - Thierry Reding <treding@nvidia.com>
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    const: ampire,am-480272h3tmqw-t01h
-
-  power-supply: true
-  enable-gpios: true
-  backlight: true
-  port: true
-
-required:
-  - compatible
-
-additionalProperties: false
-
-examples:
-  - |
-    panel_rgb: panel {
-      compatible = "ampire,am-480272h3tmqw-t01h";
-      enable-gpios = <&gpioa 8 1>;
-      port {
-        panel_in_rgb: endpoint {
-          remote-endpoint = <&controller_out_rgb>;
-        };
-      };
-    };
-
-...
diff --git a/dts/Bindings/display/panel/ampire,am800480r3tmqwa1h.txt b/dts/Bindings/display/panel/ampire,am800480r3tmqwa1h.txt
deleted file mode 100644
index 83e2cae1cc..0000000000
--- a/dts/Bindings/display/panel/ampire,am800480r3tmqwa1h.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "ampire,am800480r3tmqwa1h"
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/giantplus,gpm940b0.txt b/dts/Bindings/display/panel/giantplus,gpm940b0.txt
deleted file mode 100644
index 3dab52f92c..0000000000
--- a/dts/Bindings/display/panel/giantplus,gpm940b0.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-GiantPlus 3.0" (320x240 pixels) 24-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "giantplus,gpm940b0"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
new file mode 100644
index 0000000000..4ebcea7d0c
--- /dev/null
+++ b/dts/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk500hd1829
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+     description: regulator that supplies the iovcc voltage
+  vcc-supply:
+     description: regulator that supplies the vcc voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi@ff450000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk500hd1829";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vcc-supply = <&vcc_2v8>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/logicpd,type28.yaml b/dts/Bindings/display/panel/logicpd,type28.yaml
new file mode 100644
index 0000000000..2834287b8d
--- /dev/null
+++ b/dts/Bindings/display/panel/logicpd,type28.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+  - Adam Ford <aford173@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: logicpd,type28
+
+  power-supply: true
+  enable-gpios: true
+  backlight: true
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    lcd0: display {
+      compatible = "logicpd,type28";
+      enable-gpios = <&gpio5 27 0>;
+      backlight = <&backlight>;
+      port {
+        lcd_in: endpoint {
+          remote-endpoint = <&dpi_out>;
+        };
+      };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/panel-simple.yaml b/dts/Bindings/display/panel/panel-simple.yaml
new file mode 100644
index 0000000000..8fe60ee253
--- /dev/null
+++ b/dts/Bindings/display/panel/panel-simple.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple panels with one power supply
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the simple (dumb) panels that
+  requires only a single power-supply.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+      - ampire,am-480272h3tmqw-t01h
+        # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+      - ampire,am800480r3tmqwa1h
+        # AUO B116XAK01 eDP TFT LCD panel
+      - auo,b116xa01
+        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+      - boe,nv140fhmn49
+        # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
+      - giantplus,gpm940b0
+        # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
+      - satoz,sat050at40h12r2
+        # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
+      - sharp,ls020b1dd01d
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel_rgb: panel-rgb {
+      compatible = "ampire,am-480272h3tmqw-t01h";
+      power-supply = <&vcc_lcd_reg>;
+
+      port {
+        panel_in_rgb: endpoint {
+          remote-endpoint = <&ltdc_out_rgb>;
+        };
+      };
+    };
diff --git a/dts/Bindings/display/panel/sharp,ls020b1dd01d.txt b/dts/Bindings/display/panel/sharp,ls020b1dd01d.txt
deleted file mode 100644
index e45edbc565..0000000000
--- a/dts/Bindings/display/panel/sharp,ls020b1dd01d.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Sharp 2.0" (240x160 pixels) 16-bit TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,ls020b1dd01d"
-- power-supply: as specified in the base binding
-
-Optional properties:
-- backlight: as specified in the base binding
-- enable-gpios: as specified in the base binding
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/sony,acx424akp.yaml b/dts/Bindings/display/panel/sony,acx424akp.yaml
new file mode 100644
index 0000000000..185dcc8fd1
--- /dev/null
+++ b/dts/Bindings/display/panel/sony,acx424akp.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX424AKP 4" 480x864 AMOLED panel
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,acx424akp
+  reg: true
+  reset-gpios: true
+  vddi-supply:
+     description: regulator that supplies the vddi voltage
+  enforce-video-mode: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi-controller@a0351000 {
+        compatible = "ste,mcde-dsi";
+        reg = <0xa0351000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,acx424akp";
+            reg = <0>;
+            vddi-supply = <&foo>;
+            reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
new file mode 100644
index 0000000000..186e5e1c8f
--- /dev/null
+++ b/dts/Bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
+
+maintainers:
+  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: xinpeng,xpp055c272
+  reg: true
+  backlight: true
+  reset-gpios: true
+  iovcc-supply:
+     description: regulator that supplies the iovcc voltage
+  vci-supply:
+     description: regulator that supplies the vci voltage
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - iovcc-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi@ff450000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "xinpeng,xpp055c272";
+            reg = <0>;
+            backlight = <&backlight>;
+            iovcc-supply = <&vcc_1v8>;
+            vci-supply = <&vcc3v3_lcd>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/display/renesas,cmm.yaml b/dts/Bindings/display/renesas,cmm.yaml
new file mode 100644
index 0000000000..a57037b9e9
--- /dev/null
+++ b/dts/Bindings/display/renesas,cmm.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,cmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Color Management Module (CMM)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+  - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+
+description: |+
+  Renesas R-Car color management module connected to R-Car DU video channels.
+  It provides image enhancement functions such as 1-D look-up tables (LUT),
+  3-D look-up tables (CLU), 1D-histogram generation (HGO), and color
+  space conversion (CSC).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - renesas,r8a7795-cmm
+          - renesas,r8a7796-cmm
+          - renesas,r8a77965-cmm
+          - renesas,r8a77990-cmm
+          - renesas,r8a77995-cmm
+        - const: renesas,rcar-gen3-cmm
+      - items:
+        - const: renesas,rcar-gen2-cmm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7796-sysc.h>
+
+    cmm0: cmm@fea40000 {
+         compatible = "renesas,r8a7796-cmm",
+                      "renesas,rcar-gen3-cmm";
+         reg = <0 0xfea40000 0 0x1000>;
+         power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+         clocks = <&cpg CPG_MOD 711>;
+         resets = <&cpg 711>;
+    };
diff --git a/dts/Bindings/display/renesas,du.txt b/dts/Bindings/display/renesas,du.txt
index 17cb277136..eb4ae41fe4 100644
--- a/dts/Bindings/display/renesas,du.txt
+++ b/dts/Bindings/display/renesas,du.txt
@@ -41,10 +41,14 @@ Required Properties:
       supplied they must be named "dclkin.x" with "x" being the input clock
       numerical index.
 
-  - vsps: A list of phandle and channel index tuples to the VSPs that handle
-    the memory interfaces for the DU channels. The phandle identifies the VSP
-    instance that serves the DU channel, and the channel index identifies the
-    LIF instance in that VSP.
+  - renesas,cmms: A list of phandles to the CMM instances present in the SoC,
+    one for each available DU channel. The property shall not be specified for
+    SoCs that do not provide any CMM (such as V3M and V3H).
+
+  - renesas,vsps: A list of phandle and channel index tuples to the VSPs that
+    handle the memory interfaces for the DU channels. The phandle identifies the
+    VSP instance that serves the DU channel, and the channel index identifies
+    the LIF instance in that VSP.
 
 Required nodes:
 
@@ -92,7 +96,8 @@ Example: R8A7795 (R-Car H3) ES2.0 DU
 			 <&cpg CPG_MOD 722>,
 			 <&cpg CPG_MOD 721>;
 		clock-names = "du.0", "du.1", "du.2", "du.3";
-		vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+		renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+		renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index ce4c1fc911..151be3bba0 100644
--- a/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -4,13 +4,16 @@ Rockchip specific extensions to the Synopsys Designware MIPI DSI
 Required properties:
 - #address-cells: Should be <1>.
 - #size-cells: Should be <0>.
-- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
-	      "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi".
+- compatible: one of
+	"rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
+	"rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
+	"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
 - reg: Represent the physical address range of the controller.
 - interrupts: Represent the controller's interrupt to the CPU(s).
 - clocks, clock-names: Phandles to the controller's pll reference
-  clock(ref) and APB clock(pclk). For RK3399, a phy config clock
-  (phy_cfg) and a grf clock(grf) are required. As described in [1].
+  clock(ref) when using an internal dphy and APB clock(pclk).
+  For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
+  are required. As described in [1].
 - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
 - ports: contain a port node with endpoint definitions as defined in [2].
   For vopb,set the reg = <0> and set the reg = <1> for vopl.
@@ -18,6 +21,8 @@ Required properties:
 - video port 1 for either a panel or subsequent encoder
 
 Optional properties:
+- phys: from general PHY binding: the phandle for the PHY device.
+- phy-names: Should be "dphy" if phys references an external phy.
 - power-domains: a phandle to mipi dsi power domain node.
 - resets: list of phandle + reset specifier pairs, as described in [3].
 - reset-names: string reset name, must be "apb".
diff --git a/dts/Bindings/display/rockchip/rockchip-lvds.txt b/dts/Bindings/display/rockchip/rockchip-lvds.txt
index 7849ff0392..aaf8c44cf9 100644
--- a/dts/Bindings/display/rockchip/rockchip-lvds.txt
+++ b/dts/Bindings/display/rockchip/rockchip-lvds.txt
@@ -4,6 +4,7 @@ Rockchip RK3288 LVDS interface
 Required properties:
 - compatible: matching the soc type, one of
 	- "rockchip,rk3288-lvds";
+	- "rockchip,px30-lvds";
 
 - reg: physical base address of the controller and length
 	of memory mapped region.
@@ -18,6 +19,9 @@ Required properties:
 - rockchip,grf: phandle to the general register files syscon
 - rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
 
+- phys: LVDS/DSI DPHY (px30 only)
+- phy-names: name of the PHY, must be "dphy" (px30 only)
+
 Optional properties:
 - pinctrl-names: must contain a "lcdc" entry.
 - pinctrl-0: pin control group to be used for this controller.
diff --git a/dts/Bindings/display/sunxi/sun4i-drm.txt b/dts/Bindings/display/sunxi/sun4i-drm.txt
deleted file mode 100644
index 31ab72cba3..0000000000
--- a/dts/Bindings/display/sunxi/sun4i-drm.txt
+++ /dev/null
@@ -1,637 +0,0 @@
-Allwinner A10 Display Pipeline
-==============================
-
-The Allwinner A10 Display pipeline is composed of several components
-that are going to be documented below:
-
-For all connections between components up to the TCONs in the display
-pipeline, when there are multiple components of the same type at the
-same depth, the local endpoint ID must be the same as the remote
-component's index. For example, if the remote endpoint is Frontend 1,
-then the local endpoint ID must be 1.
-
-    Frontend 0  [0] ------- [0]  Backend 0  [0] ------- [0]  TCON 0
-		[1] --   -- [1]             [1] --   -- [1]
-		      \ /                         \ /
-		       X                           X
-		      / \                         / \
-		[0] --   -- [0]             [0] --   -- [0]
-    Frontend 1  [1] ------- [1]  Backend 1  [1] ------- [1]  TCON 1
-
-For a two pipeline system such as the one depicted above, the lines
-represent the connections between the components, while the numbers
-within the square brackets corresponds to the ID of the local endpoint.
-
-The same rule also applies to DE 2.0 mixer-TCON connections:
-
-    Mixer 0  [0] ----------- [0]  TCON 0
-	     [1] ----   ---- [1]
-		     \ /
-		      X
-		     / \
-	     [0] ----   ---- [0]
-    Mixer 1  [1] ----------- [1]  TCON 1
-
-HDMI Encoder
-------------
-
-The HDMI Encoder supports the HDMI video and audio outputs, and does
-CEC. It is one end of the pipeline.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun4i-a10-hdmi
-    * allwinner,sun5i-a10s-hdmi
-    * allwinner,sun6i-a31-hdmi
-  - reg: base address and size of memory-mapped region
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the HDMI encoder
-    * ahb: the HDMI interface clock
-    * mod: the HDMI module clock
-    * ddc: the HDMI ddc clock (A31 only)
-    * pll-0: the first video PLL
-    * pll-1: the second video PLL
-  - clock-names: the clock names mentioned above
-  - resets: phandle to the reset control for the HDMI encoder (A31 only)
-  - dmas: phandles to the DMA channels used by the HDMI encoder
-    * ddc-tx: The channel for DDC transmission
-    * ddc-rx: The channel for DDC reception
-    * audio-tx: The channel used for audio transmission
-  - dma-names: the channel names mentioned above
-
-  - ports: A ports node with endpoint definitions as defined in
-    Documentation/devicetree/bindings/media/video-interfaces.txt. The
-    first port should be the input endpoint. The second should be the
-    output, usually to an HDMI connector.
-
-DWC HDMI TX Encoder
--------------------
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with Allwinner's own PHY IP. It supports audio and video outputs and CEC.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-Required properties:
-
-  - compatible: value must be one of:
-    * "allwinner,sun8i-a83t-dw-hdmi"
-    * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"
-    * "allwinner,sun50i-h6-dw-hdmi"
-  - reg: base address and size of memory-mapped region
-  - reg-io-width: See dw_hdmi.txt. Shall be 1.
-  - interrupts: HDMI interrupt number
-  - clocks: phandles to the clocks feeding the HDMI encoder
-    * iahb: the HDMI bus clock
-    * isfr: the HDMI register clock
-    * tmds: TMDS clock
-    * cec: HDMI CEC clock (H6 only)
-    * hdcp: HDCP clock (H6 only)
-    * hdcp-bus: HDCP bus clock (H6 only)
-  - clock-names: the clock names mentioned above
-  - resets:
-    * ctrl: HDMI controller reset
-    * hdcp: HDCP reset (H6 only)
-  - reset-names: reset names mentioned above
-  - phys: phandle to the DWC HDMI PHY
-  - phy-names: must be "phy"
-
-  - ports: A ports node with endpoint definitions as defined in
-    Documentation/devicetree/bindings/media/video-interfaces.txt. The
-    first port should be the input endpoint. The second should be the
-    output, usually to an HDMI connector.
-
-Optional properties:
-  - hvcc-supply: the VCC power supply of the controller
-
-DWC HDMI PHY
-------------
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun8i-a83t-hdmi-phy
-    * allwinner,sun8i-h3-hdmi-phy
-    * allwinner,sun8i-r40-hdmi-phy
-    * allwinner,sun50i-a64-hdmi-phy
-    * allwinner,sun50i-h6-hdmi-phy
-  - reg: base address and size of memory-mapped region
-  - clocks: phandles to the clocks feeding the HDMI PHY
-    * bus: the HDMI PHY interface clock
-    * mod: the HDMI PHY module clock
-  - clock-names: the clock names mentioned above
-  - resets: phandle to the reset controller driving the PHY
-  - reset-names: must be "phy"
-
-H3, A64 and R40 HDMI PHY require additional clocks:
-  - pll-0: parent of phy clock
-  - pll-1: second possible phy clock parent (A64/R40 only)
-
-TV Encoder
-----------
-
-The TV Encoder supports the composite and VGA output. It is one end of
-the pipeline.
-
-Required properties:
- - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
- - reg: base address and size of memory-mapped region
- - clocks: the clocks driving the TV encoder
- - resets: phandle to the reset controller driving the encoder
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoint.
-
-TCON
-----
-
-The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
-
-Required properties:
- - compatible: value must be either:
-   * allwinner,sun4i-a10-tcon
-   * allwinner,sun5i-a13-tcon
-   * allwinner,sun6i-a31-tcon
-   * allwinner,sun6i-a31s-tcon
-   * allwinner,sun7i-a20-tcon
-   * allwinner,sun8i-a23-tcon
-   * allwinner,sun8i-a33-tcon
-   * allwinner,sun8i-a83t-tcon-lcd
-   * allwinner,sun8i-a83t-tcon-tv
-   * allwinner,sun8i-r40-tcon-tv
-   * allwinner,sun8i-v3s-tcon
-   * allwinner,sun9i-a80-tcon-lcd
-   * allwinner,sun9i-a80-tcon-tv
-   * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd"
-   * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv"
-   * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv
- - reg: base address and size of memory-mapped region
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the TCON.
-   - 'ahb': the interface clocks
-   - 'tcon-ch0': The clock driving the TCON channel 0, if supported
- - resets: phandles to the reset controllers driving the encoder
-   - "lcd": the reset line for the TCON
-   - "edp": the reset line for the eDP block (A80 only)
-
- - clock-names: the clock names mentioned above
- - reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created, if TCON supports
-   channel 0.
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoint, the second one the output
-
-  The output may have multiple endpoints. TCON can have 1 or 2 channels,
-  usually with the first channel being used for the panels interfaces
-  (RGB, LVDS, etc.), and the second being used for the outputs that
-  require another controller (TV Encoder, HDMI, etc.). The endpoints
-  will take an extra property, allwinner,tcon-channel, to specify the
-  channel the endpoint is associated to. If that property is not
-  present, the endpoint number will be used as the channel number.
-
-For TCONs with channel 0, there is one more clock required:
-   - 'tcon-ch0': The clock driving the TCON channel 0
-For TCONs with channel 1, there is one more clock required:
-   - 'tcon-ch1': The clock driving the TCON channel 1
-
-When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found
-in A13, H3, H5 and V3s SoCs), you need one more reset line:
-   - 'lvds': The reset line driving the LVDS logic
-
-And on the A23, A31, A31s and A33, you need one more clock line:
-   - 'lvds-alt': An alternative clock source, separate from the TCON channel 0
-                 clock, that can be used to drive the LVDS clock
-
-TCON TOP
---------
-
-TCON TOPs main purpose is to configure whole display pipeline. It determines
-relationships between mixers and TCONs, selects source TCON for HDMI, muxes
-LCD and TV encoder GPIO output, selects TV encoder clock source and contains
-additional TV TCON and DSI gates.
-
-It allows display pipeline to be configured in very different ways:
-
-                                / LCD0/LVDS0
-                 / [0] TCON-LCD0
-                 |              \ MIPI DSI
- mixer0          |
-        \        / [1] TCON-LCD1 - LCD1/LVDS1
-         TCON-TOP
-        /        \ [2] TCON-TV0 [0] - TVE0/RGB
- mixer1          |                  \
-                 |                   TCON-TOP - HDMI
-                 |                  /
-                 \ [3] TCON-TV1 [1] - TVE1/RGB
-
-Note that both TCON TOP references same physical unit. Both mixers can be
-connected to any TCON. Not all TCON TOP variants support all features.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun8i-r40-tcon-top
-    * allwinner,sun50i-h6-tcon-top
-  - reg: base address and size of the memory-mapped region.
-  - clocks: phandle to the clocks feeding the TCON TOP
-    * bus: TCON TOP interface clock
-    * tcon-tv0: TCON TV0 clock
-    * tve0: TVE0 clock (R40 only)
-    * tcon-tv1: TCON TV1 clock (R40 only)
-    * tve1: TVE0 clock (R40 only)
-    * dsi: MIPI DSI clock (R40 only)
-  - clock-names: clock name mentioned above
-  - resets: phandle to the reset line driving the TCON TOP
-  - #clock-cells : must contain 1
-  - clock-output-names: Names of clocks created for TCON TV0 channel clock,
-    TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in
-    that order.
-
-- ports: A ports node with endpoint definitions as defined in
-    Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
-    be defined:
-    * port 0 is input for mixer0 mux
-    * port 1 is output for mixer0 mux
-    * port 2 is input for mixer1 mux
-    * port 3 is output for mixer1 mux
-    * port 4 is input for HDMI mux
-    * port 5 is output for HDMI mux
-    All output endpoints for mixer muxes and input endpoints for HDMI mux should
-    have reg property with the id of the target TCON, as shown in above graph
-    (0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one
-    endpoint connected to remote endpoint.
-
-DRC
----
-
-The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
-(A31, A23, A33, A80), allows to dynamically adjust pixel
-brightness/contrast based on histogram measurements for LCD content
-adaptive backlight control.
-
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun6i-a31-drc
-    * allwinner,sun6i-a31s-drc
-    * allwinner,sun8i-a23-drc
-    * allwinner,sun8i-a33-drc
-    * allwinner,sun9i-a80-drc
-  - reg: base address and size of the memory-mapped region.
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the DRC
-    * ahb: the DRC interface clock
-    * mod: the DRC module clock
-    * ram: the DRC DRAM clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset line driving the DRC
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoints, the second one the outputs
-
-Display Engine Backend
-----------------------
-
-The display engine backend exposes layers and sprites to the
-system.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun4i-a10-display-backend
-    * allwinner,sun5i-a13-display-backend
-    * allwinner,sun6i-a31-display-backend
-    * allwinner,sun7i-a20-display-backend
-    * allwinner,sun8i-a23-display-backend
-    * allwinner,sun8i-a33-display-backend
-    * allwinner,sun9i-a80-display-backend
-  - reg: base address and size of the memory-mapped region.
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the frontend and backend
-    * ahb: the backend interface clock
-    * mod: the backend module clock
-    * ram: the backend DRAM clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset controllers driving the backend
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoints, the second one the output
-
-On the A33, some additional properties are required:
-  - reg needs to have an additional region corresponding to the SAT
-  - reg-names need to be set, with "be" and "sat"
-  - clocks and clock-names need to have a phandle to the SAT bus
-    clocks, whose name will be "sat"
-  - resets and reset-names need to have a phandle to the SAT bus
-    resets, whose name will be "sat"
-
-DEU
----
-
-The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
-can sharpen the display content in both luma and chroma channels.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun9i-a80-deu
-  - reg: base address and size of the memory-mapped region.
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the DEU
-    * ahb: the DEU interface clock
-    * mod: the DEU module clock
-    * ram: the DEU DRAM clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset line driving the DEU
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoints, the second one the outputs
-
-Display Engine Frontend
------------------------
-
-The display engine frontend does formats conversion, scaling,
-deinterlacing and color space conversion.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun4i-a10-display-frontend
-    * allwinner,sun5i-a13-display-frontend
-    * allwinner,sun6i-a31-display-frontend
-    * allwinner,sun7i-a20-display-frontend
-    * allwinner,sun8i-a23-display-frontend
-    * allwinner,sun8i-a33-display-frontend
-    * allwinner,sun9i-a80-display-frontend
-  - reg: base address and size of the memory-mapped region.
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the frontend and backend
-    * ahb: the backend interface clock
-    * mod: the backend module clock
-    * ram: the backend DRAM clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset controllers driving the backend
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoints, the second one the outputs
-
-Display Engine 2.0 Mixer
-------------------------
-
-The DE2 mixer have many functionalities, currently only layer blending is
-supported.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun8i-a83t-de2-mixer-0
-    * allwinner,sun8i-a83t-de2-mixer-1
-    * allwinner,sun8i-h3-de2-mixer-0
-    * allwinner,sun8i-r40-de2-mixer-0
-    * allwinner,sun8i-r40-de2-mixer-1
-    * allwinner,sun8i-v3s-de2-mixer
-    * allwinner,sun50i-a64-de2-mixer-0
-    * allwinner,sun50i-a64-de2-mixer-1
-    * allwinner,sun50i-h6-de3-mixer-0
-  - reg: base address and size of the memory-mapped region.
-  - clocks: phandles to the clocks feeding the mixer
-    * bus: the mixer interface clock
-    * mod: the mixer module clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset controllers driving the mixer
-
-- ports: A ports node with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt. The
-  first port should be the input endpoints, the second one the output
-
-
-Display Engine Pipeline
------------------------
-
-The display engine pipeline (and its entry point, since it can be
-either directly the backend or the frontend) is represented as an
-extra node.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun4i-a10-display-engine
-    * allwinner,sun5i-a10s-display-engine
-    * allwinner,sun5i-a13-display-engine
-    * allwinner,sun6i-a31-display-engine
-    * allwinner,sun6i-a31s-display-engine
-    * allwinner,sun7i-a20-display-engine
-    * allwinner,sun8i-a23-display-engine
-    * allwinner,sun8i-a33-display-engine
-    * allwinner,sun8i-a83t-display-engine
-    * allwinner,sun8i-h3-display-engine
-    * allwinner,sun8i-r40-display-engine
-    * allwinner,sun8i-v3s-display-engine
-    * allwinner,sun9i-a80-display-engine
-    * allwinner,sun50i-a64-display-engine
-    * allwinner,sun50i-h6-display-engine
-
-  - allwinner,pipelines: list of phandle to the display engine
-    frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
-
-Example:
-
-panel: panel {
-	compatible = "olimex,lcd-olinuxino-43-ts";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		panel_input: endpoint {
-			remote-endpoint = <&tcon0_out_panel>;
-		};
-	};
-};
-
-connector {
-	compatible = "hdmi-connector";
-	type = "a";
-
-	port {
-		hdmi_con_in: endpoint {
-			remote-endpoint = <&hdmi_out_con>;
-		};
-	};
-};
-
-hdmi: hdmi@1c16000 {
-	compatible = "allwinner,sun5i-a10s-hdmi";
-	reg = <0x01c16000 0x1000>;
-	interrupts = <58>;
-	clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
-		 <&ccu CLK_PLL_VIDEO0_2X>,
-		 <&ccu CLK_PLL_VIDEO1_2X>;
-	clock-names = "ahb", "mod", "pll-0", "pll-1";
-	dmas = <&dma SUN4I_DMA_NORMAL 16>,
-	       <&dma SUN4I_DMA_NORMAL 16>,
-	       <&dma SUN4I_DMA_DEDICATED 24>;
-	dma-names = "ddc-tx", "ddc-rx", "audio-tx";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			hdmi_in_tcon0: endpoint {
-				remote-endpoint = <&tcon0_out_hdmi>;
-			};
-		};
-
-		port@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			hdmi_out_con: endpoint {
-				remote-endpoint = <&hdmi_con_in>;
-			};
-		};
-	};
-};
-
-tve0: tv-encoder@1c0a000 {
-	compatible = "allwinner,sun4i-a10-tv-encoder";
-	reg = <0x01c0a000 0x1000>;
-	clocks = <&ahb_gates 34>;
-	resets = <&tcon_ch0_clk 0>;
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		tve0_in_tcon0: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&tcon0_out_tve0>;
-		};
-	};
-};
-
-tcon0: lcd-controller@1c0c000 {
-	compatible = "allwinner,sun5i-a13-tcon";
-	reg = <0x01c0c000 0x1000>;
-	interrupts = <44>;
-	resets = <&tcon_ch0_clk 1>;
-	reset-names = "lcd";
-	clocks = <&ahb_gates 36>,
-		 <&tcon_ch0_clk>,
-		 <&tcon_ch1_clk>;
-	clock-names = "ahb",
-		      "tcon-ch0",
-		      "tcon-ch1";
-	clock-output-names = "tcon-pixel-clock";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		tcon0_in: port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tcon0_in_be0: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&be0_out_tcon0>;
-			};
-		};
-
-		tcon0_out: port@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tcon0_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_input>;
-			};
-
-			tcon0_out_tve0: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&tve0_in_tcon0>;
-			};
-		};
-	};
-};
-
-fe0: display-frontend@1e00000 {
-	compatible = "allwinner,sun5i-a13-display-frontend";
-	reg = <0x01e00000 0x20000>;
-	interrupts = <47>;
-	clocks = <&ahb_gates 46>, <&de_fe_clk>,
-		 <&dram_gates 25>;
-	clock-names = "ahb", "mod",
-		      "ram";
-	resets = <&de_fe_clk>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fe0_out: port@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			fe0_out_be0: endpoint {
-				remote-endpoint = <&be0_in_fe0>;
-			};
-		};
-	};
-};
-
-be0: display-backend@1e60000 {
-	compatible = "allwinner,sun5i-a13-display-backend";
-	reg = <0x01e60000 0x10000>;
-	interrupts = <47>;
-	clocks = <&ahb_gates 44>, <&de_be_clk>,
-		 <&dram_gates 26>;
-	clock-names = "ahb", "mod",
-		      "ram";
-	resets = <&de_be_clk>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		be0_in: port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			be0_in_fe0: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&fe0_out_be0>;
-			};
-		};
-
-		be0_out: port@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			be0_out_tcon0: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&tcon0_in_be0>;
-			};
-		};
-	};
-};
-
-display-engine {
-	compatible = "allwinner,sun5i-a13-display-engine";
-	allwinner,pipelines = <&fe0>;
-};
diff --git a/dts/Bindings/display/tilcdc/tfp410.txt b/dts/Bindings/display/tilcdc/tfp410.txt
deleted file mode 100644
index a58ae7756f..0000000000
--- a/dts/Bindings/display/tilcdc/tfp410.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Device-Tree bindings for tilcdc DRM TFP410 output driver
-
-Required properties:
- - compatible: value should be "ti,tilcdc,tfp410".
- - i2c: the phandle for the i2c device to use for DDC
-
-Recommended properties:
- - pinctrl-names, pinctrl-0: the pincontrol settings to configure
-   muxing properly for pins that connect to TFP410 device
- - powerdn-gpio: the powerdown GPIO, pulled low to power down the
-   TFP410 device (for DPMS_OFF)
-
-Example:
-
-	dvicape {
-		compatible = "ti,tilcdc,tfp410";
-		i2c = <&i2c2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>;
-		powerdn-gpio = <&gpio2 31 0>;
-	};
diff --git a/dts/Bindings/dma/atmel-xdma.txt b/dts/Bindings/dma/atmel-xdma.txt
index 0eb2b3207e..4dc398e1a3 100644
--- a/dts/Bindings/dma/atmel-xdma.txt
+++ b/dts/Bindings/dma/atmel-xdma.txt
@@ -2,9 +2,7 @@
 
 * XDMA Controller
 Required properties:
-- compatible: Should be "atmel,<chip>-dma".
-  <chip> compatible description:
-  - sama5d4: first SoC adding the XDMAC
+- compatible: Should be "atmel,sama5d4-dma" or "microchip,sam9x60-dma".
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain DMA interrupt.
 - #dma-cells: Must be <1>, used to represent the number of integer cells in
diff --git a/dts/Bindings/dma/fsl-edma.txt b/dts/Bindings/dma/fsl-edma.txt
index 29dd3ccb12..e77b08ebcd 100644
--- a/dts/Bindings/dma/fsl-edma.txt
+++ b/dts/Bindings/dma/fsl-edma.txt
@@ -10,6 +10,7 @@ Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
 	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
+	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing
diff --git a/dts/Bindings/dma/fsl-imx-sdma.txt b/dts/Bindings/dma/fsl-imx-sdma.txt
index 9d8bbac27d..c9e97409e8 100644
--- a/dts/Bindings/dma/fsl-imx-sdma.txt
+++ b/dts/Bindings/dma/fsl-imx-sdma.txt
@@ -10,6 +10,9 @@ Required properties:
       "fsl,imx6q-sdma"
       "fsl,imx7d-sdma"
       "fsl,imx8mq-sdma"
+      "fsl,imx8mm-sdma"
+      "fsl,imx8mn-sdma"
+      "fsl,imx8mp-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
   firmware.
diff --git a/dts/Bindings/dma/jz4780-dma.txt b/dts/Bindings/dma/jz4780-dma.txt
index ec89782d94..3459e77be2 100644
--- a/dts/Bindings/dma/jz4780-dma.txt
+++ b/dts/Bindings/dma/jz4780-dma.txt
@@ -1,4 +1,4 @@
-* Ingenic JZ4780 DMA Controller
+* Ingenic XBurst DMA Controller
 
 Required properties:
 
@@ -8,10 +8,12 @@ Required properties:
   * ingenic,jz4770-dma
   * ingenic,jz4780-dma
   * ingenic,x1000-dma
+  * ingenic,x1830-dma
 - reg: Should contain the DMA channel registers location and length, followed
   by the DMA controller registers location and length.
 - interrupts: Should contain the interrupt specifier of the DMA controller.
-- clocks: Should contain a clock specifier for the JZ4780/X1000 PDMA clock.
+- clocks: Should contain a clock specifier for the JZ4780/X1000/X1830 PDMA
+  clock.
 - #dma-cells: Must be <2>. Number of integer cells in the dmas property of
   DMA clients (see below).
 
diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt
index 5551e929fd..b7f81c63be 100644
--- a/dts/Bindings/dma/renesas,rcar-dmac.txt
+++ b/dts/Bindings/dma/renesas,rcar-dmac.txt
@@ -30,6 +30,7 @@ Required Properties:
 		- "renesas,dmac-r8a7794" (R-Car E2)
 		- "renesas,dmac-r8a7795" (R-Car H3)
 		- "renesas,dmac-r8a7796" (R-Car M3-W)
+		- "renesas,dmac-r8a77961" (R-Car M3-W+)
 		- "renesas,dmac-r8a77965" (R-Car M3-N)
 		- "renesas,dmac-r8a77970" (R-Car V3M)
 		- "renesas,dmac-r8a77980" (R-Car V3H)
diff --git a/dts/Bindings/dma/st,stm32-dma.yaml b/dts/Bindings/dma/st,stm32-dma.yaml
new file mode 100644
index 0000000000..0c0ac11ad5
--- /dev/null
+++ b/dts/Bindings/dma/st,stm32-dma.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA Controller bindings
+
+description: |
+  The STM32 DMA is a general-purpose direct memory access controller capable of
+  supporting 8 independent DMA channels. Each channel can have up to 8 requests.
+  DMA clients connected to the STM32 DMA controller must use the format
+  described in the dma.txt file, using a four-cell specifier for each
+  channel: a phandle to the DMA controller plus the following four integer cells:
+    1. The channel id
+    2. The request line number
+    3. A 32bit mask specifying the DMA channel configuration which are device
+      dependent:
+        -bit 9: Peripheral Increment Address
+          0x0: no address increment between transfers
+          0x1: increment address between transfers
+        -bit 10: Memory Increment Address
+          0x0: no address increment between transfers
+          0x1: increment address between transfers
+        -bit 15: Peripheral Increment Offset Size
+          0x0: offset size is linked to the peripheral bus width
+          0x1: offset size is fixed to 4 (32-bit alignment)
+        -bit 16-17: Priority level
+          0x0: low
+          0x1: medium
+          0x2: high
+          0x3: very high
+    4. A 32bit bitfield value specifying DMA features which are device dependent:
+       -bit 0-1: DMA FIFO threshold selection
+         0x0: 1/4 full FIFO
+         0x1: 1/2 full FIFO
+         0x2: 3/4 full FIFO
+         0x3: full FIFO
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@st.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 4
+
+  compatible:
+    const: st,stm32-dma
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 8
+    description: Should contain all of the per-channel DMA
+      interrupts in ascending order with respect to the
+      DMA channel index.
+
+  resets:
+    maxItems: 1
+
+  st,mem2mem:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: if defined, it indicates that the controller
+      supports memory-to-memory transfer
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-controller@40026400 {
+      compatible = "st,stm32-dma";
+      reg = <0x40026400 0x400>;
+      interrupts = <56>,
+                   <57>,
+                   <58>,
+                   <59>,
+                   <60>,
+                   <68>,
+                   <69>,
+                   <70>;
+      clocks = <&clk_hclk>;
+      #dma-cells = <4>;
+      st,mem2mem;
+      resets = <&rcc 150>;
+      dma-requests = <8>;
+    };
+
+...
diff --git a/dts/Bindings/dma/st,stm32-dmamux.yaml b/dts/Bindings/dma/st,stm32-dmamux.yaml
new file mode 100644
index 0000000000..915bc4af95
--- /dev/null
+++ b/dts/Bindings/dma/st,stm32-dmamux.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@st.com>
+
+allOf:
+  - $ref: "dma-router.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 3
+
+  compatible:
+    const: st,stm32h7-dmamux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - dma-masters
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-router@40020800 {
+      compatible = "st,stm32h7-dmamux";
+      reg = <0x40020800 0x3c>;
+      #dma-cells = <3>;
+      dma-requests = <128>;
+      dma-channels = <16>;
+      dma-masters = <&dma1 &dma2>;
+      clocks = <&timer_clk>;
+    };
+
+...
+
diff --git a/dts/Bindings/dma/st,stm32-mdma.yaml b/dts/Bindings/dma/st,stm32-mdma.yaml
new file mode 100644
index 0000000000..c66543d0c2
--- /dev/null
+++ b/dts/Bindings/dma/st,stm32-mdma.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 MDMA Controller bindings
+
+description: |
+  The STM32 MDMA is a general-purpose direct memory access controller capable of
+  supporting 64 independent DMA channels with 256 HW requests.
+  DMA clients connected to the STM32 MDMA controller must use the format
+  described in the dma.txt file, using a five-cell specifier for each channel:
+  a phandle to the MDMA controller plus the following five integer cells:
+    1. The request line number
+    2. The priority level
+      0x0: Low
+      0x1: Medium
+      0x2: High
+      0x3: Very high
+    3. A 32bit mask specifying the DMA channel configuration
+      -bit 0-1: Source increment mode
+        0x0: Source address pointer is fixed
+        0x2: Source address pointer is incremented after each data transfer
+        0x3: Source address pointer is decremented after each data transfer
+      -bit 2-3: Destination increment mode
+        0x0: Destination address pointer is fixed
+        0x2: Destination address pointer is incremented after each data transfer
+        0x3: Destination address pointer is decremented after each data transfer
+      -bit 8-9: Source increment offset size
+        0x0: byte (8bit)
+        0x1: half-word (16bit)
+        0x2: word (32bit)
+        0x3: double-word (64bit)
+      -bit 10-11: Destination increment offset size
+        0x0: byte (8bit)
+        0x1: half-word (16bit)
+        0x2: word (32bit)
+        0x3: double-word (64bit)
+      -bit 25-18: The number of bytes to be transferred in a single transfer
+                  (min = 1 byte, max = 128 bytes)
+      -bit 29:28: Trigger Mode
+        0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
+        0x1: Each MDMA request triggers a block transfer (max 64K bytes)
+        0x2: Each MDMA request triggers a repeated block transfer
+        0x3: Each MDMA request triggers a linked list transfer
+    4. A 32bit value specifying the register to be used to acknowledge the request
+       if no HW ack signal is used by the MDMA client
+    5. A 32bit mask specifying the value to be written to acknowledge the request
+       if no HW ack signal is used by the MDMA client
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@st.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 5
+
+  compatible:
+    const: st,stm32h7-mdma
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  st,ahb-addr-masks:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 mask to list memory devices addressed via AHB bus.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-controller@52000000 {
+      compatible = "st,stm32h7-mdma";
+      reg = <0x52000000 0x1000>;
+      interrupts = <122>;
+      clocks = <&timer_clk>;
+      resets = <&rcc 992>;
+      #dma-cells = <5>;
+      dma-channels = <16>;
+      dma-requests = <32>;
+      st,ahb-addr-masks = <0x20000000>, <0x00000000>;
+    };
+
+...
+
diff --git a/dts/Bindings/dma/stm32-dma.txt b/dts/Bindings/dma/stm32-dma.txt
deleted file mode 100644
index c5f5190972..0000000000
--- a/dts/Bindings/dma/stm32-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* STMicroelectronics STM32 DMA controller
-
-The STM32 DMA is a general-purpose direct memory access controller capable of
-supporting 8 independent DMA channels. Each channel can have up to 8 requests.
-
-Required properties:
-- compatible: Should be "st,stm32-dma"
-- reg: Should contain DMA registers location and length. This should include
-  all of the per-channel registers.
-- interrupts: Should contain all of the per-channel DMA interrupts in
-  ascending order with respect to the DMA channel index.
-- clocks: Should contain the input clock of the DMA instance.
-- #dma-cells : Must be <4>. See DMA client paragraph for more details.
-
-Optional properties:
-- dma-requests : Number of DMA requests supported.
-- resets: Reference to a reset controller asserting the DMA controller
-- st,mem2mem: boolean; if defined, it indicates that the controller supports
-  memory-to-memory transfer
-
-Example:
-
-	dma2: dma-controller@40026400 {
-		compatible = "st,stm32-dma";
-		reg = <0x40026400 0x400>;
-		interrupts = <56>,
-			     <57>,
-			     <58>,
-			     <59>,
-			     <60>,
-			     <68>,
-			     <69>,
-			     <70>;
-		clocks = <&clk_hclk>;
-		#dma-cells = <4>;
-		st,mem2mem;
-		resets = <&rcc 150>;
-		dma-requests = <8>;
-	};
-
-* DMA client
-
-DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a four-cell specifier for each
-channel: a phandle to the DMA controller plus the following four integer cells:
-
-1. The channel id
-2. The request line number
-3. A 32bit mask specifying the DMA channel configuration which are device
-   dependent:
-  -bit 9: Peripheral Increment Address
-	0x0: no address increment between transfers
-	0x1: increment address between transfers
- -bit 10: Memory Increment Address
-	0x0: no address increment between transfers
-	0x1: increment address between transfers
- -bit 15: Peripheral Increment Offset Size
-	0x0: offset size is linked to the peripheral bus width
-	0x1: offset size is fixed to 4 (32-bit alignment)
- -bit 16-17: Priority level
-	0x0: low
-	0x1: medium
-	0x2: high
-	0x3: very high
-4. A 32bit bitfield value specifying DMA features which are device dependent:
- -bit 0-1: DMA FIFO threshold selection
-	0x0: 1/4 full FIFO
-	0x1: 1/2 full FIFO
-	0x2: 3/4 full FIFO
-	0x3: full FIFO
-
-
-Example:
-
-	usart1: serial@40011000 {
-		compatible = "st,stm32-uart";
-		reg = <0x40011000 0x400>;
-		interrupts = <37>;
-		clocks = <&clk_pclk2>;
-		dmas = <&dma2 2 4 0x10400 0x3>,
-		       <&dma2 7 5 0x10200 0x3>;
-		dma-names = "rx", "tx";
-	};
diff --git a/dts/Bindings/dma/stm32-dmamux.txt b/dts/Bindings/dma/stm32-dmamux.txt
deleted file mode 100644
index 1b893b2355..0000000000
--- a/dts/Bindings/dma/stm32-dmamux.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-STM32 DMA MUX (DMA request router)
-
-Required properties:
-- compatible:	"st,stm32h7-dmamux"
-- reg:		Memory map for accessing module
-- #dma-cells:	Should be set to <3>.
-		First parameter is request line number.
-		Second is DMA channel configuration
-		Third is Fifo threshold
-		For more details about the three cells, please see
-		stm32-dma.txt documentation binding file
-- dma-masters:	Phandle pointing to the DMA controllers.
-		Several controllers are allowed. Only "st,stm32-dma" DMA
-		compatible are supported.
-
-Optional properties:
-- dma-channels : Number of DMA requests supported.
-- dma-requests : Number of DMAMUX requests supported.
-- resets: Reference to a reset controller asserting the DMA controller
-- clocks: Input clock of the DMAMUX instance.
-
-Example:
-
-/* DMA controller 1 */
-dma1: dma-controller@40020000 {
-	compatible = "st,stm32-dma";
-	reg = <0x40020000 0x400>;
-	interrupts = <11>,
-		     <12>,
-		     <13>,
-		     <14>,
-		     <15>,
-		     <16>,
-		     <17>,
-		     <47>;
-	clocks = <&timer_clk>;
-	#dma-cells = <4>;
-	st,mem2mem;
-	resets = <&rcc 150>;
-	dma-channels = <8>;
-	dma-requests = <8>;
-};
-
-/* DMA controller 1 */
-dma2: dma@40020400 {
-	compatible = "st,stm32-dma";
-	reg = <0x40020400 0x400>;
-	interrupts = <56>,
-		     <57>,
-		     <58>,
-		     <59>,
-		     <60>,
-		     <68>,
-		     <69>,
-		     <70>;
-	clocks = <&timer_clk>;
-	#dma-cells = <4>;
-	st,mem2mem;
-	resets = <&rcc 150>;
-	dma-channels = <8>;
-	dma-requests = <8>;
-};
-
-/* DMA mux */
-dmamux1: dma-router@40020800 {
-	compatible = "st,stm32h7-dmamux";
-	reg = <0x40020800 0x3c>;
-	#dma-cells = <3>;
-	dma-requests = <128>;
-	dma-channels = <16>;
-	dma-masters = <&dma1 &dma2>;
-	clocks = <&timer_clk>;
-};
-
-/* DMA client */
-usart1: serial@40011000 {
-	compatible = "st,stm32-usart", "st,stm32-uart";
-	reg = <0x40011000 0x400>;
-	interrupts = <37>;
-	clocks = <&timer_clk>;
-	dmas = <&dmamux1 41 0x414 0>,
-	       <&dmamux1 42 0x414 0>;
-	dma-names = "rx", "tx";
-};
diff --git a/dts/Bindings/dma/stm32-mdma.txt b/dts/Bindings/dma/stm32-mdma.txt
deleted file mode 100644
index d18772d6bc..0000000000
--- a/dts/Bindings/dma/stm32-mdma.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-* STMicroelectronics STM32 MDMA controller
-
-The STM32 MDMA is a general-purpose direct memory access controller capable of
-supporting 64 independent DMA channels with 256 HW requests.
-
-Required properties:
-- compatible: Should be "st,stm32h7-mdma"
-- reg: Should contain MDMA registers location and length. This should include
-  all of the per-channel registers.
-- interrupts: Should contain the MDMA interrupt.
-- clocks: Should contain the input clock of the DMA instance.
-- resets: Reference to a reset controller asserting the DMA controller.
-- #dma-cells : Must be <5>. See DMA client paragraph for more details.
-
-Optional properties:
-- dma-channels: Number of DMA channels supported by the controller.
-- dma-requests: Number of DMA request signals supported by the controller.
-- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via
-  AHB bus.
-
-Example:
-
-	mdma1: dma@52000000 {
-		compatible = "st,stm32h7-mdma";
-		reg = <0x52000000 0x1000>;
-		interrupts = <122>;
-		clocks = <&timer_clk>;
-		resets = <&rcc 992>;
-		#dma-cells = <5>;
-		dma-channels = <16>;
-		dma-requests = <32>;
-		st,ahb-addr-masks = <0x20000000>, <0x00000000>;
-	};
-
-* DMA client
-
-DMA clients connected to the STM32 MDMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each channel:
-a phandle to the MDMA controller plus the following five integer cells:
-
-1. The request line number
-2. The priority level
-	0x00: Low
-	0x01: Medium
-	0x10: High
-	0x11: Very high
-3. A 32bit mask specifying the DMA channel configuration
- -bit 0-1: Source increment mode
-	0x00: Source address pointer is fixed
-	0x10: Source address pointer is incremented after each data transfer
-	0x11: Source address pointer is decremented after each data transfer
- -bit 2-3: Destination increment mode
-	0x00: Destination address pointer is fixed
-	0x10: Destination address pointer is incremented after each data
-	transfer
-	0x11: Destination address pointer is decremented after each data
-	transfer
- -bit 8-9: Source increment offset size
-	0x00: byte (8bit)
-	0x01: half-word (16bit)
-	0x10: word (32bit)
-	0x11: double-word (64bit)
- -bit 10-11: Destination increment offset size
-	0x00: byte (8bit)
-	0x01: half-word (16bit)
-	0x10: word (32bit)
-	0x11: double-word (64bit)
--bit 25-18: The number of bytes to be transferred in a single transfer
-	(min = 1 byte, max = 128 bytes)
--bit 29:28: Trigger Mode
-	0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
-	0x01: Each MDMA request triggers a block transfer (max 64K bytes)
-	0x10: Each MDMA request triggers a repeated block transfer
-	0x11: Each MDMA request triggers a linked list transfer
-4. A 32bit value specifying the register to be used to acknowledge the request
-   if no HW ack signal is used by the MDMA client
-5. A 32bit mask specifying the value to be written to acknowledge the request
-   if no HW ack signal is used by the MDMA client
-
-Example:
-
-	i2c4: i2c@5c002000 {
-		compatible = "st,stm32f7-i2c";
-		reg = <0x5c002000 0x400>;
-		interrupts = <95>,
-			     <96>;
-		clocks = <&timer_clk>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
-		       <&mdma1 37 0x0 0x40002 0x0 0x0>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
diff --git a/dts/Bindings/dma/ti/k3-udma.yaml b/dts/Bindings/dma/ti/k3-udma.yaml
new file mode 100644
index 0000000000..8b5c346f23
--- /dev/null
+++ b/dts/Bindings/dma/ti/k3-udma.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description: |
+  The UDMA-P is intended to perform similar (but significantly upgraded)
+  functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P
+  module supports the transmission and reception of various packet types.
+  The UDMA-P architecture facilitates the segmentation and reassembly of SoC DMA
+  data structure compliant packets to/from smaller data blocks that are natively
+  compatible with the specific requirements of each connected peripheral.
+  Multiple Tx and Rx channels are provided within the DMA which allow multiple
+  segmentation or reassembly operations to be ongoing. The DMA controller
+  maintains state information for each of the channels which allows packet
+  segmentation and reassembly operations to be time division multiplexed between
+  channels in order to share the underlying DMA hardware. An external DMA
+  scheduler is used to control the ordering and rate at which this multiplexing
+  occurs for Transmit operations. The ordering and rate of Receive operations
+  is indirectly controlled by the order in which blocks are pushed into the DMA
+  on the Rx PSI-L interface.
+
+  The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
+  channels. Channels in the UDMA-P can be configured to be either Packet-Based
+  or Third-Party channels on a channel by channel basis.
+
+  All transfers within NAVSS is done between PSI-L source and destination
+  threads.
+  The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or
+  legacy, non PSI-L native peripherals. In the later case a special, small PDMA
+  is tasked to act as a bridge between the PSI-L fabric and the legacy
+  peripheral.
+
+  PDMAs can be configured via UDMAP peer registers to match with the
+  configuration of the legacy peripheral.
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+    description: |
+      The cell is the PSI-L  thread ID of the remote (to UDMAP) end.
+      Valid ranges for thread ID depends on the data movement direction:
+      for source thread IDs (rx): 0 - 0x7fff
+      for destination thread IDs (tx): 0x8000 - 0xffff
+
+      Please refer to the device documentation for the PSI-L thread map and also
+      the PSI-L peripheral chapter for the correct thread ID.
+
+  compatible:
+    enum:
+      - ti,am654-navss-main-udmap
+      - ti,am654-navss-mcu-udmap
+      - ti,j721e-navss-main-udmap
+      - ti,j721e-navss-mcu-udmap
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+   items:
+     - const: gcfg
+     - const: rchanrt
+     - const: tchanrt
+
+  msi-parent: true
+
+  ti,sci:
+    description: phandle to TI-SCI compatible System controller node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,sci-dev-id:
+    description: TI-SCI device id of UDMAP
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,ringacc:
+    description: phandle to the ring accelerator node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,sci-rm-range-tchan:
+    description: |
+      Array of UDMA tchan resource subtypes for resource allocation for this
+      host
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+  ti,sci-rm-range-rchan:
+    description: |
+      Array of UDMA rchan resource subtypes for resource allocation for this
+      host
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+  ti,sci-rm-range-rflow:
+    description: |
+      Array of UDMA rflow resource subtypes for resource allocation for this
+      host
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    # Should be enough
+    maxItems: 255
+
+required:
+  - compatible
+  - "#dma-cells"
+  - reg
+  - reg-names
+  - msi-parent
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,ringacc
+  - ti,sci-rm-range-tchan
+  - ti,sci-rm-range-rchan
+  - ti,sci-rm-range-rflow
+
+examples:
+  - |+
+    cbass_main {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cbass_main_navss: navss@30800000 {
+            compatible = "simple-mfd";
+            #address-cells = <2>;
+            #size-cells = <2>;
+            dma-coherent;
+            dma-ranges;
+            ranges;
+
+            ti,sci-dev-id = <118>;
+
+            main_udmap: dma-controller@31150000 {
+                compatible = "ti,am654-navss-main-udmap";
+                reg = <0x0 0x31150000 0x0 0x100>,
+                      <0x0 0x34000000 0x0 0x100000>,
+                      <0x0 0x35000000 0x0 0x100000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt";
+                #dma-cells = <1>;
+
+                ti,ringacc = <&ringacc>;
+
+                msi-parent = <&inta_main_udmass>;
+
+                ti,sci = <&dmsc>;
+                ti,sci-dev-id = <188>;
+
+                ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+                                        <0x2>; /* TX_CHAN */
+                ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+                                        <0x5>; /* RX_CHAN */
+                ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+            };
+        };
+
+        mcasp0: mcasp@02B00000 {
+            dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+            dma-names = "tx", "rx";
+        };
+
+        crypto: crypto@4E00000 {
+            compatible = "ti,sa2ul-crypto";
+
+            dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
+            dma-names = "tx", "rx1", "rx2";
+        };
+    };
diff --git a/dts/Bindings/eeprom/at24.yaml b/dts/Bindings/eeprom/at24.yaml
index e8778560d9..0f6d8db18d 100644
--- a/dts/Bindings/eeprom/at24.yaml
+++ b/dts/Bindings/eeprom/at24.yaml
@@ -145,10 +145,7 @@ properties:
       over reads to the next slave address. Please consult the manual of
       your device.
 
-  wp-gpios:
-    description:
-      GPIO to which the write-protect pin of the chip is connected.
-    maxItems: 1
+  wp-gpios: true
 
   address-width:
     allOf:
@@ -167,6 +164,10 @@ properties:
     minimum: 1
     maximum: 8
 
+  vcc-supply:
+    description:
+      phandle of the regulator that provides the supply voltage.
+
 required:
   - compatible
   - reg
diff --git a/dts/Bindings/eeprom/at25.txt b/dts/Bindings/eeprom/at25.txt
index 42577dd113..fcacd97abd 100644
--- a/dts/Bindings/eeprom/at25.txt
+++ b/dts/Bindings/eeprom/at25.txt
@@ -20,6 +20,7 @@ Optional properties:
 - spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
 - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
 - read-only : this parameter-less property disables writes to the eeprom
+- wp-gpios : GPIO to which the write-protect pin of the chip is connected
 
 Obsolete legacy properties can be used in place of "size", "pagesize",
 "address-width", and "read-only":
@@ -36,6 +37,7 @@ Example:
 		spi-max-frequency = <5000000>;
 		spi-cpha;
 		spi-cpol;
+		wp-gpios = <&gpio1 3 0>;
 
 		pagesize = <64>;
 		size = <32768>;
diff --git a/dts/Bindings/gpio/qcom,wcd934x-gpio.yaml b/dts/Bindings/gpio/qcom,wcd934x-gpio.yaml
new file mode 100644
index 0000000000..32a566ec35
--- /dev/null
+++ b/dts/Bindings/gpio/qcom,wcd934x-gpio.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/qcom,wcd934x-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WCD9340/WCD9341 GPIO controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc WCD9340/WCD9341 Audio Codec has integrated
+  gpio controller to control 5 gpios on the chip.
+
+properties:
+  compatible:
+    enum:
+      - qcom,wcd9340-gpio
+      - qcom,wcd9341-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    wcdgpio: gpio@42 {
+        compatible = "qcom,wcd9340-gpio";
+        reg = <0x042 0x2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/dts/Bindings/gpio/renesas,gpio-rcar.txt b/dts/Bindings/gpio/renesas,gpio-rcar.txt
index 41e5fed0f8..10dce84b15 100644
--- a/dts/Bindings/gpio/renesas,gpio-rcar.txt
+++ b/dts/Bindings/gpio/renesas,gpio-rcar.txt
@@ -18,7 +18,8 @@ Required Properties:
     - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
     - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
     - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller.
-    - "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller.
+    - "renesas,gpio-r8a7796": for R8A77960 (R-Car M3-W) compatible GPIO controller.
+    - "renesas,gpio-r8a77961": for R8A77961 (R-Car M3-W+) compatible GPIO controller.
     - "renesas,gpio-r8a77965": for R8A77965 (R-Car M3-N) compatible GPIO controller.
     - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller.
     - "renesas,gpio-r8a77980": for R8A77980 (R-Car V3H) compatible GPIO controller.
diff --git a/dts/Bindings/gpio/sifive,gpio.yaml b/dts/Bindings/gpio/sifive,gpio.yaml
new file mode 100644
index 0000000000..418e8381e0
--- /dev/null
+++ b/dts/Bindings/gpio/sifive,gpio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sifive,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive GPIO controller
+
+maintainers:
+  - Yash Shah <yash.shah@sifive.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+properties:
+  compatible:
+    items:
+      - const: sifive,fu540-c000-gpio
+      - const: sifive,gpio0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      interrupt mapping one per GPIO. Maximum 16 GPIOs.
+    minItems: 1
+    maxItems: 16
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/sifive-fu540-prci.h>
+      gpio@10060000 {
+        compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+        interrupt-parent = <&plic>;
+        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+        reg = <0x0 0x10060000 0x0 0x1000>;
+        clocks = <&tlclk PRCI_CLK_TLCLK>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+...
diff --git a/dts/Bindings/gpio/xylon,logicvc-gpio.yaml b/dts/Bindings/gpio/xylon,logicvc-gpio.yaml
new file mode 100644
index 0000000000..d102888c1b
--- /dev/null
+++ b/dts/Bindings/gpio/xylon,logicvc-gpio.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xylon LogiCVC GPIO controller
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The LogiCVC GPIO describes the GPIO block included in the LogiCVC display
+  controller. These are meant to be used for controlling display-related
+  signals.
+
+  The controller exposes GPIOs from the display and power control registers,
+  which are mapped by the driver as follows:
+  - GPIO[4:0] (display control) mapped to index 0-4
+  - EN_BLIGHT (power control) mapped to index 5
+  - EN_VDD (power control) mapped to index 6
+  - EN_VEE (power control) mapped to index 7
+  - V_EN (power control) mapped to index 8
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - xylon,logicvc-3.02.a-gpio
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 9
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+examples:
+  - |
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      logicvc_gpio: gpio@40 {
+        compatible = "xylon,logicvc-3.02.a-gpio";
+        reg = <0x40 0x40>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-line-names = "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4",
+               "EN_BLIGHT", "EN_VDD", "EN_VEE", "V_EN";
+      };
+    };
diff --git a/dts/Bindings/gpu/arm,mali-bifrost.yaml b/dts/Bindings/gpu/arm,mali-bifrost.yaml
index 0c426e371e..4ea6a87896 100644
--- a/dts/Bindings/gpu/arm,mali-bifrost.yaml
+++ b/dts/Bindings/gpu/arm,mali-bifrost.yaml
@@ -18,6 +18,7 @@ properties:
       - enum:
           - amlogic,meson-g12a-mali
           - realtek,rtd1619-mali
+          - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
 
   reg:
diff --git a/dts/Bindings/hwmon/adi,adm1177.yaml b/dts/Bindings/hwmon/adi,adm1177.yaml
new file mode 100644
index 0000000000..2a9822075b
--- /dev/null
+++ b/dts/Bindings/hwmon/adi,adm1177.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+  Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1177
+
+  reg:
+    maxItems: 1
+
+  avcc-supply:
+    description:
+      Phandle to the Avcc power supply
+
+  shunt-resistor-micro-ohms:
+    description:
+      The value of curent sense resistor in microohms. If not provided,
+      the current reading and overcurrent alert is disabled.
+
+  adi,shutdown-threshold-microamp:
+    description:
+      Specifies the current level at which an over current alert occurs.
+      If not provided, the overcurrent alert is configured to max ADC range
+      based on shunt-resistor-micro-ohms.
+
+  adi,vrange-high-enable:
+    description:
+      Specifies which internal voltage divider to be used. A 1 selects
+      a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pwmon@5a {
+                compatible = "adi,adm1177";
+                reg = <0x5a>;
+                shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
+                adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
+                adi,vrange-high-enable;
+        };
+    };
+...
diff --git a/dts/Bindings/hwmon/adi,ltc2947.yaml b/dts/Bindings/hwmon/adi,ltc2947.yaml
index ae04903f34..6a742a51e2 100644
--- a/dts/Bindings/hwmon/adi,ltc2947.yaml
+++ b/dts/Bindings/hwmon/adi,ltc2947.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/hwmon/adi,ltc2947.yaml#
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2947.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices LTC2947 high precision power and energy monitor
diff --git a/dts/Bindings/hwmon/pmbus/ti,ucd90320.yaml b/dts/Bindings/hwmon/pmbus/ti,ucd90320.yaml
new file mode 100644
index 0000000000..5d42e13042
--- /dev/null
+++ b/dts/Bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,ucd90320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UCD90320 power sequencer
+
+maintainers:
+  - Jim Wright <wrightj@linux.vnet.ibm.com>
+
+description: |
+  The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and
+  monitor. The 24 integrated ADC channels (AMONx) monitor the power supply
+  voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as
+  digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for
+  margining (MARx), 16 for logical GPO, and 32 GPIs for cascading, and system
+  function.
+
+  http://focus.ti.com/lit/ds/symlink/ucd90320.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,ucd90320
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ucd90320@11 {
+            compatible = "ti,ucd90320";
+            reg = <0x11>;
+        };
+    };
diff --git a/dts/Bindings/i2c/i2c-at91.txt b/dts/Bindings/i2c/i2c-at91.txt
index 8347b1e7c0..d4bad86107 100644
--- a/dts/Bindings/i2c/i2c-at91.txt
+++ b/dts/Bindings/i2c/i2c-at91.txt
@@ -1,10 +1,16 @@
 I2C for Atmel platforms
 
 Required properties :
-- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
-     "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
-     "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c", "atmel,sama5d2-i2c" or
-     "microchip,sam9x60-i2c"
+- compatible : Must be one of:
+	"atmel,at91rm9200-i2c",
+	"atmel,at91sam9261-i2c",
+	"atmel,at91sam9260-i2c",
+	"atmel,at91sam9g20-i2c",
+	"atmel,at91sam9g10-i2c",
+	"atmel,at91sam9x5-i2c",
+	"atmel,sama5d4-i2c",
+	"atmel,sama5d2-i2c",
+	"microchip,sam9x60-i2c".
 - reg: physical base address of the controller and length of memory mapped
      region.
 - interrupts: interrupt number to the cpu.
diff --git a/dts/Bindings/i2c/i2c-imx-lpi2c.txt b/dts/Bindings/i2c/i2c-imx-lpi2c.txt
index b245363d6d..f0c072ff9e 100644
--- a/dts/Bindings/i2c/i2c-imx-lpi2c.txt
+++ b/dts/Bindings/i2c/i2c-imx-lpi2c.txt
@@ -4,6 +4,7 @@ Required properties:
 - compatible :
   - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
   - "fsl,imx8qxp-lpi2c" for LPI2C compatible with the one integrated on i.MX8QXP soc
+  - "fsl,imx8qm-lpi2c" for LPI2C compatible with the one integrated on i.MX8QM soc
 - reg : address and length of the lpi2c master registers
 - interrupts : lpi2c interrupt
 - clocks : lpi2c clock specifier
diff --git a/dts/Bindings/i2c/i2c-jz4780.txt b/dts/Bindings/i2c/i2c-jz4780.txt
index 3738cfbf86..d229eff5ca 100644
--- a/dts/Bindings/i2c/i2c-jz4780.txt
+++ b/dts/Bindings/i2c/i2c-jz4780.txt
@@ -1,7 +1,9 @@
 * Ingenic JZ4780 I2C Bus controller
 
 Required properties:
-- compatible: should be "ingenic,jz4780-i2c"
+- compatible: should be one of the following:
+  - "ingenic,jz4780-i2c" for the JZ4780
+  - "ingenic,x1000-i2c" for the X1000
 - reg: Should contain the address & size of the I2C controller registers.
 - interrupts: Should specify the interrupt provided by parent.
 - clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
diff --git a/dts/Bindings/i2c/i2c-mux-pca954x.txt b/dts/Bindings/i2c/i2c-mux-pca954x.txt
index 30ac6a60f0..7abda506b8 100644
--- a/dts/Bindings/i2c/i2c-mux-pca954x.txt
+++ b/dts/Bindings/i2c/i2c-mux-pca954x.txt
@@ -25,6 +25,8 @@ Required Properties:
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the reset input.
+  - idle-state: if present, overrides i2c-mux-idle-disconnect,
+    Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
   - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
     children in idle state. This is necessary for example, if there are several
     multiplexers on the bus and the devices behind them use same I2C addresses.
diff --git a/dts/Bindings/i2c/renesas,i2c.txt b/dts/Bindings/i2c/renesas,i2c.txt
index 0660a3eb25..c359965d07 100644
--- a/dts/Bindings/i2c/renesas,i2c.txt
+++ b/dts/Bindings/i2c/renesas,i2c.txt
@@ -17,7 +17,8 @@ Required properties:
 	"renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
 	"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
 	"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
-	"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
+	"renesas,i2c-r8a7796" if the device is a part of a R8A77960 SoC.
+	"renesas,i2c-r8a77961" if the device is a part of a R8A77961 SoC.
 	"renesas,i2c-r8a77965" if the device is a part of a R8A77965 SoC.
 	"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
 	"renesas,i2c-r8a77980" if the device is a part of a R8A77980 SoC.
diff --git a/dts/Bindings/i2c/renesas,iic.txt b/dts/Bindings/i2c/renesas,iic.txt
index 64d11ffb07..ffe085c994 100644
--- a/dts/Bindings/i2c/renesas,iic.txt
+++ b/dts/Bindings/i2c/renesas,iic.txt
@@ -17,6 +17,7 @@ Required properties:
 			- "renesas,iic-r8a7794" (R-Car E2)
 			- "renesas,iic-r8a7795" (R-Car H3)
 			- "renesas,iic-r8a7796" (R-Car M3-W)
+			- "renesas,iic-r8a77961" (R-Car M3-W+)
 			- "renesas,iic-r8a77965" (R-Car M3-N)
 			- "renesas,iic-r8a77990" (R-Car E3)
 			- "renesas,iic-sh73a0" (SH-Mobile AG5)
diff --git a/dts/Bindings/iio/accel/adi,adis16240.yaml b/dts/Bindings/iio/accel/adi,adis16240.yaml
new file mode 100644
index 0000000000..4147f02b5e
--- /dev/null
+++ b/dts/Bindings/iio/accel/adi,adis16240.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16240 Programmable Impact Sensor and Recorder driver
+
+maintainers:
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  ADIS16240 Programmable Impact Sensor and Recorder driver that supports
+  SPI interface.
+    https://www.analog.com/en/products/adis16240.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16240
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adis16240";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/dts/Bindings/iio/accel/bma180.txt b/dts/Bindings/iio/accel/bma180.txt
index 3b25b4c4d4..f53237270b 100644
--- a/dts/Bindings/iio/accel/bma180.txt
+++ b/dts/Bindings/iio/accel/bma180.txt
@@ -1,11 +1,14 @@
-* Bosch BMA180 / BMA250 triaxial acceleration sensor
+* Bosch BMA180 / BMA25x triaxial acceleration sensor
 
 http://omapworld.com/BMA180_111_1002839.pdf
 http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
 
 Required properties:
 
-  - compatible : should be "bosch,bma180" or "bosch,bma250"
+  - compatible : should be one of:
+    "bosch,bma180"
+    "bosch,bma250"
+    "bosch,bma254"
   - reg : the I2C address of the sensor
 
 Optional properties:
diff --git a/dts/Bindings/iio/accel/bosch,bma400.yaml b/dts/Bindings/iio/accel/bosch,bma400.yaml
new file mode 100644
index 0000000000..c1c6d6f223
--- /dev/null
+++ b/dts/Bindings/iio/accel/bosch,bma400.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <dan@dlrobertson.com>
+
+description: |
+  Acceleration and temperature iio sensors with an i2c interface
+
+  Specifications about the sensor can be found at:
+    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma400
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  vddio-supply:
+    description: phandle to the regulator that provides power to the sensor's IO
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      accelerometer@14 {
+        compatible = "bosch,bma400";
+        reg = <0x14>;
+        vdd-supply = <&vdd>;
+        vddio-supply = <&vddio>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/dts/Bindings/iio/accel/kionix,kxcjk1013.txt b/dts/Bindings/iio/accel/kionix,kxcjk1013.txt
index eb76a02e2a..ce950e162d 100644
--- a/dts/Bindings/iio/accel/kionix,kxcjk1013.txt
+++ b/dts/Bindings/iio/accel/kionix,kxcjk1013.txt
@@ -9,9 +9,16 @@ Required properties:
     "kionix,kxtf9"
  - reg: i2c slave address
 
+Optional properties:
+
+  - mount-matrix: an optional 3x3 mounting rotation matrix
+
 Example:
 
 kxtf9@f {
 	compatible = "kionix,kxtf9";
 	reg = <0x0F>;
+	mount-matrix =	"0", "1", "0",
+			"1", "0", "0",
+			"0", "0", "1";
 };
diff --git a/dts/Bindings/iio/adc/adi,ad7091r5.yaml b/dts/Bindings/iio/adc/adi,ad7091r5.yaml
new file mode 100644
index 0000000000..31ffa275f5
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad7091r5.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+
+maintainers:
+  - Beniamin Bia <beniamin.bia@analog.com>
+
+description: |
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7091r5
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Phandle to the vref power supply
+
+  interrupts:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@2f {
+                compatible = "adi,ad7091r5";
+                reg = <0x2f>;
+
+                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                interrupt-parent = <&gpio>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/adc/adi,ad7124.yaml b/dts/Bindings/iio/adc/adi,ad7124.yaml
index e932d5aed0..f0934b295e 100644
--- a/dts/Bindings/iio/adc/adi,ad7124.yaml
+++ b/dts/Bindings/iio/adc/adi,ad7124.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml#
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AD7124 ADC device driver
diff --git a/dts/Bindings/iio/adc/adi,ad7192.yaml b/dts/Bindings/iio/adc/adi,ad7192.yaml
index 567a33a83d..84d25bd394 100644
--- a/dts/Bindings/iio/adc/adi,ad7192.yaml
+++ b/dts/Bindings/iio/adc/adi,ad7192.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7192.yaml#
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7192.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AD7192 ADC device driver
diff --git a/dts/Bindings/iio/adc/adi,ad7606.yaml b/dts/Bindings/iio/adc/adi,ad7606.yaml
index 6eb33207a1..5117ad68a5 100644
--- a/dts/Bindings/iio/adc/adi,ad7606.yaml
+++ b/dts/Bindings/iio/adc/adi,ad7606.yaml
@@ -82,7 +82,7 @@ properties:
       Must be the device tree identifier of the over-sampling
       mode pins. As the line is active high, it should be marked
       GPIO_ACTIVE_HIGH.
-    maxItems: 1
+    maxItems: 3
 
   adi,sw-mode:
     description:
@@ -125,9 +125,9 @@ examples:
                 adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                 reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
                 adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
-                                                &gpio 23 GPIO_ACTIVE_HIGH
-                                                &gpio 26 GPIO_ACTIVE_HIGH>;
+                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
                 standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                 adi,sw-mode;
         };
diff --git a/dts/Bindings/iio/adc/at91-sama5d2_adc.txt b/dts/Bindings/iio/adc/at91-sama5d2_adc.txt
index 4a3c1d496e..07c59f301b 100644
--- a/dts/Bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/dts/Bindings/iio/adc/at91-sama5d2_adc.txt
@@ -1,7 +1,7 @@
 * AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 Required properties:
-  - compatible: Should be "atmel,sama5d2-adc".
+  - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc".
   - reg: Should contain ADC registers location and length.
   - interrupts: Should contain the IRQ line for the ADC.
   - clocks: phandle to device clock.
diff --git a/dts/Bindings/iio/adc/lltc,ltc2496.yaml b/dts/Bindings/iio/adc/lltc,ltc2496.yaml
new file mode 100644
index 0000000000..59009997dc
--- /dev/null
+++ b/dts/Bindings/iio/adc/lltc,ltc2496.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/lltc,ltc2496.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology / Analog Devices LTC2496 ADC
+
+maintainers:
+ - Lars-Peter Clausen <lars@metafoo.de>
+ - Michael Hennerich <Michael.Hennerich@analog.com>
+ - Stefan Popa <stefan.popa@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc2496
+
+  vref-supply:
+    description: phandle to an external regulator providing the reference voltage
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  reg:
+    description: spi chipselect number according to the usual spi bindings
+
+  spi-max-frequency:
+    description: maximal spi bus frequency supported
+
+required:
+  - compatible
+  - vref-supply
+  - reg
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "lltc,ltc2496";
+            reg = <0>;
+            vref-supply = <&ltc2496_reg>;
+            spi-max-frequency = <2000000>;
+        };
+    };
diff --git a/dts/Bindings/iio/adc/microchip,mcp3911.yaml b/dts/Bindings/iio/adc/microchip,mcp3911.yaml
index 881059b80d..0ce290473f 100644
--- a/dts/Bindings/iio/adc/microchip,mcp3911.yaml
+++ b/dts/Bindings/iio/adc/microchip,mcp3911.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#"
+$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Microchip MCP3911 Dual channel analog front end (ADC)
diff --git a/dts/Bindings/iio/adc/sigma-delta-modulator.txt b/dts/Bindings/iio/adc/sigma-delta-modulator.txt
deleted file mode 100644
index 59b92cd325..0000000000
--- a/dts/Bindings/iio/adc/sigma-delta-modulator.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Device-Tree bindings for sigma delta modulator
-
-Required properties:
-- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
-	as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
-
-Example node:
-
-	ads1202: adc {
-		compatible = "sd-modulator";
-		#io-channel-cells = <0>;
-	};
diff --git a/dts/Bindings/iio/adc/sigma-delta-modulator.yaml b/dts/Bindings/iio/adc/sigma-delta-modulator.yaml
new file mode 100644
index 0000000000..a390343d0c
--- /dev/null
+++ b/dts/Bindings/iio/adc/sigma-delta-modulator.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device-Tree bindings for sigma delta modulator
+
+maintainers:
+  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+
+properties:
+  compatible:
+    description: |
+      "sd-modulator" can be used as a generic SD modulator,
+      if the modulator is not specified in the compatible list.
+    enum:
+      - sd-modulator
+      - ads1201
+
+  '#io-channel-cells':
+    const: 0
+
+required:
+  - compatible
+  - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ads1202: adc {
+      compatible = "sd-modulator";
+      #io-channel-cells = <0>;
+    };
+
+...
diff --git a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.txt b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.txt
deleted file mode 100644
index 75ba25d062..0000000000
--- a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-STMicroelectronics STM32 DFSDM ADC device driver
-
-
-STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
-interface external sigma delta modulators to STM32 micro controllers.
-It is mainly targeted for:
-- Sigma delta modulators (motor control, metering...)
-- PDM microphones (audio digital microphone)
-
-It features up to 8 serial digital interfaces (SPI or Manchester) and
-up to 4 filters on stm32h7 or 6 filters on stm32mp1.
-
-Each child node match with a filter instance.
-
-Contents of a STM32 DFSDM root node:
-------------------------------------
-Required properties:
-- compatible: Should be one of:
-  "st,stm32h7-dfsdm"
-  "st,stm32mp1-dfsdm"
-- reg: Offset and length of the DFSDM block register set.
-- clocks: IP and serial interfaces clocking. Should be set according
-		to rcc clock ID and "clock-names".
-- clock-names: Input clock name "dfsdm" must be defined,
-		"audio" is optional. If defined CLKOUT is based on the audio
-		clock, else "dfsdm" is used.
-- #interrupt-cells = <1>;
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- spi-max-frequency: Requested only for SPI master mode.
-		  SPI clock OUT frequency (Hz). This clock must be set according
-		  to "clock" property. Frequency must be a multiple of the rcc
-		  clock frequency. If not, SPI CLKOUT frequency will not be
-		  accurate.
-- pinctrl-names:	Set to "default".
-- pinctrl-0:		List of phandles pointing to pin configuration
-			nodes to set pins in mode of operation for dfsdm
-			on external pin.
-
-Contents of a STM32 DFSDM child nodes:
---------------------------------------
-
-Required properties:
-- compatible: Must be:
-	"st,stm32-dfsdm-adc" for sigma delta ADCs
-	"st,stm32-dfsdm-dmic" for audio digital microphone.
-- reg: Specifies the DFSDM filter instance used.
-	Valid values are from 0 to 3 on stm32h7, 0 to 5 on stm32mp1.
-- interrupts: IRQ lines connected to each DFSDM filter instance.
-- st,adc-channels:	List of single-ended channels muxed for this ADC.
-			valid values:
-				"st,stm32h7-dfsdm" compatibility: 0 to 7.
-- st,adc-channel-names:	List of single-ended channel names.
-- st,filter-order:  SinC filter order from 0 to 5.
-			0: FastSinC
-			[1-5]: order 1 to 5.
-			For audio purpose it is recommended to use order 3 to 5.
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
-
-Required properties for "st,stm32-dfsdm-adc" compatibility:
-- io-channels: From common IIO binding. Used to pipe external sigma delta
-		modulator or internal ADC output to DFSDM channel.
-		This is not required for "st,stm32-dfsdm-pdm" compatibility as
-		PDM microphone is binded in Audio DT node.
-
-Required properties for "st,stm32-dfsdm-pdm" compatibility:
-- #sound-dai-cells: Must be set to 0.
-- dma: DMA controller phandle and DMA request line associated to the
-		filter instance (specified by the field "reg")
-- dma-names: Must be "rx"
-
-Optional properties:
-- st,adc-channel-types:	Single-ended channel input type.
-			- "SPI_R": SPI with data on rising edge (default)
-			- "SPI_F": SPI with data on falling edge
-			- "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
-			- "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
-- st,adc-channel-clk-src: Conversion clock source.
-			  - "CLKIN": external SPI clock (CLKIN x)
-			  - "CLKOUT": internal SPI clock (CLKOUT) (default)
-			  - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
-			  - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
-
-- st,adc-alt-channel: Must be defined if two sigma delta modulator are
-			  connected on same SPI input.
-			  If not set, channel n is connected to SPI input n.
-			  If set, channel n is connected to SPI input n + 1.
-
-- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0.
-		   Used for multi microphones synchronization.
-
-Example of a sigma delta adc connected on DFSDM SPI port 0
-and a pdm microphone connected on DFSDM SPI port 1:
-
-	ads1202: simple_sd_adc@0 {
-		compatible = "ads1202";
-		#io-channel-cells = <1>;
-	};
-
-	dfsdm: dfsdm@40017000 {
-		compatible = "st,stm32h7-dfsdm";
-		reg = <0x40017000 0x400>;
-		clocks = <&rcc DFSDM1_CK>;
-		clock-names = "dfsdm";
-		#interrupt-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dfsdm_adc0: filter@0 {
-			compatible = "st,stm32-dfsdm-adc";
-			#io-channel-cells = <1>;
-			reg = <0>;
-			interrupts = <110>;
-			st,adc-channels = <0>;
-			st,adc-channel-names = "sd_adc0";
-			st,adc-channel-types = "SPI_F";
-			st,adc-channel-clk-src = "CLKOUT";
-			io-channels = <&ads1202 0>;
-			st,filter-order = <3>;
-		};
-		dfsdm_pdm1: filter@1 {
-			compatible = "st,stm32-dfsdm-dmic";
-			reg = <1>;
-			interrupts = <111>;
-			dmas = <&dmamux1 102 0x400 0x00>;
-			dma-names = "rx";
-			st,adc-channels = <1>;
-			st,adc-channel-names = "dmic1";
-			st,adc-channel-types = "SPI_R";
-			st,adc-channel-clk-src = "CLKOUT";
-			st,filter-order = <5>;
-		};
-	}
diff --git a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
new file mode 100644
index 0000000000..acf36eef72
--- /dev/null
+++ b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -0,0 +1,332 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DFSDM ADC device driver
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description: |
+  STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
+  interface external sigma delta modulators to STM32 micro controllers.
+  It is mainly targeted for:
+  - Sigma delta modulators (motor control, metering...)
+  - PDM microphones (audio digital microphone)
+
+  It features up to 8 serial digital interfaces (SPI or Manchester) and
+  up to 4 filters on stm32h7 or 6 filters on stm32mp1.
+
+  Each child node matches with a filter instance.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-dfsdm
+      - st,stm32mp1-dfsdm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description:
+          Internal clock used for DFSDM digital processing and control blocks.
+          dfsdm clock can also feed CLKOUT, when CLKOUT is used.
+      - description: audio clock can be used as an alternate to feed CLKOUT.
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: dfsdm
+      - const: audio
+    minItems: 1
+    maxItems: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  spi-max-frequency:
+    description:
+      SPI clock OUT frequency (Hz). Requested only for SPI master mode.
+      This clock must be set according to the "clock" property.
+      Frequency must be a multiple of the rcc clock frequency.
+      If not, SPI CLKOUT frequency will not be accurate.
+    maximum: 20000000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^filter@[0-9]+$":
+    type: object
+    description: child node
+
+    properties:
+      compatible:
+        enum:
+          - st,stm32-dfsdm-adc
+          - st,stm32-dfsdm-dmic
+
+      reg:
+        description: Specifies the DFSDM filter instance used.
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      st,adc-channels:
+        description: |
+          List of single-ended channels muxed for this ADC.
+          On stm32h7 and stm32mp1:
+          - For st,stm32-dfsdm-adc: up to 8 channels numbered from 0 to 7.
+          - For st,stm32-dfsdm-dmic: 1 channel numbered from 0 to 7.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+          - items:
+              minimum: 0
+              maximum: 7
+
+      st,adc-channel-names:
+        description: List of single-ended channel names.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string-array
+
+      st,filter-order:
+        description: |
+          SinC filter order from 0 to 5.
+          - 0: FastSinC
+          - [1-5]: order 1 to 5.
+          For audio purpose it is recommended to use order 3 to 5.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - items:
+              minimum: 0
+              maximum: 5
+
+      "#io-channel-cells":
+        const: 1
+
+      st,adc-channel-types:
+        description: |
+          Single-ended channel input type.
+          - "SPI_R": SPI with data on rising edge (default)
+          - "SPI_F": SPI with data on falling edge
+          - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+          - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
+        items:
+          enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-channel-clk-src:
+        description: |
+          Conversion clock source.
+          - "CLKIN": external SPI clock (CLKIN x)
+          - "CLKOUT": internal SPI clock (CLKOUT) (default)
+          - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+          - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+        items:
+          enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+      st,adc-alt-channel:
+        description:
+          Must be defined if two sigma delta modulators are
+          connected on same SPI input.
+          If not set, channel n is connected to SPI input n.
+          If set, channel n is connected to SPI input n + 1.
+        type: boolean
+
+      st,filter0-sync:
+        description:
+          Set to 1 to synchronize with DFSDM filter instance 0.
+          Used for multi microphones synchronization.
+        type: boolean
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        items:
+          - const: rx
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - st,adc-channels
+      - st,adc-channel-names
+      - st,filter-order
+      - "#io-channel-cells"
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-adc
+
+      - then:
+          properties:
+            st,adc-channels:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-names:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-types:
+              minItems: 1
+              maxItems: 8
+
+            st,adc-channel-clk-src:
+              minItems: 1
+              maxItems: 8
+
+            io-channels:
+              description:
+                From common IIO binding. Used to pipe external sigma delta
+                modulator or internal ADC output to DFSDM channel.
+                This is not required for "st,stm32-dfsdm-pdm" compatibility as
+                PDM microphone is binded in Audio DT node.
+
+          required:
+            - io-channels
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32-dfsdm-dmic
+
+      - then:
+          properties:
+            st,adc-channels:
+              maxItems: 1
+
+            st,adc-channel-names:
+              maxItems: 1
+
+            st,adc-channel-types:
+              maxItems: 1
+
+            st,adc-channel-clk-src:
+              maxItems: 1
+
+          required:
+            - dmas
+            - dma-names
+
+          patternProperties:
+            "^dfsdm-dai+$":
+              type: object
+              description: child node
+
+              properties:
+                "#sound-dai-cells":
+                  const: 0
+
+                io-channels:
+                  description:
+                    From common IIO binding. Used to pipe external sigma delta
+                    modulator or internal ADC output to DFSDM channel.
+
+              required:
+                - "#sound-dai-cells"
+                - io-channels
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-dfsdm
+
+  - then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-dfsdm
+
+  - then:
+      patternProperties:
+        "^filter@[0-9]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 5
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    dfsdm: dfsdm@4400d000 {
+      compatible = "st,stm32mp1-dfsdm";
+      reg = <0x4400d000 0x800>;
+      clocks = <&rcc DFSDM_K>, <&rcc ADFSDM_K>;
+      clock-names = "dfsdm", "audio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dfsdm0: filter@0 {
+        compatible = "st,stm32-dfsdm-dmic";
+        reg = <0>;
+        interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 101 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <1>;
+        st,adc-channel-names = "dmic0";
+        st,adc-channel-types = "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT";
+        st,filter-order = <5>;
+
+        asoc_pdm0: dfsdm-dai {
+          compatible = "st,stm32h7-dfsdm-dai";
+          #sound-dai-cells = <0>;
+          io-channels = <&dfsdm0 0>;
+        };
+      };
+
+      dfsdm_pdm1: filter@1 {
+        compatible = "st,stm32-dfsdm-adc";
+        reg = <1>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 102 0x400 0x01>;
+        dma-names = "rx";
+        #io-channel-cells = <1>;
+        st,adc-channels = <2 3>;
+        st,adc-channel-names = "in2", "in3";
+        st,adc-channel-types = "SPI_R", "SPI_R";
+        st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
+        io-channels = <&sd_adc2 &sd_adc3>;
+        st,filter-order = <1>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/iio/dac/lltc,ltc1660.yaml b/dts/Bindings/iio/dac/lltc,ltc1660.yaml
index 13d005b689..a285eaba71 100644
--- a/dts/Bindings/iio/dac/lltc,ltc1660.yaml
+++ b/dts/Bindings/iio/dac/lltc,ltc1660.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/bindings/iio/dac/lltc,ltc1660.yaml#"
+$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
diff --git a/dts/Bindings/iio/imu/adi,adis16480.txt b/dts/Bindings/iio/imu/adi,adis16480.txt
index ed7783f452..cd903a1d88 100644
--- a/dts/Bindings/iio/imu/adi,adis16480.txt
+++ b/dts/Bindings/iio/imu/adi,adis16480.txt
@@ -8,6 +8,7 @@ Required properties for the ADIS16480:
 	* "adi,adis16480"
 	* "adi,adis16485"
 	* "adi,adis16488"
+	* "adi,adis16490"
 	* "adi,adis16495-1"
 	* "adi,adis16495-2"
 	* "adi,adis16495-3"
diff --git a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml
new file mode 100644
index 0000000000..9f5ca9c420
--- /dev/null
+++ b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: All Sensors DLH series low voltage digital pressure sensors
+
+maintainers:
+  - Tomislav Denis <tomislav.denis@avl.com>
+
+description: |
+  Bindings for the All Sensors DLH series pressure sensors.
+
+  Specifications about the sensors can be found at:
+    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+
+properties:
+  compatible:
+    enum:
+      - asc,dlhl60d
+      - asc,dlhl60g
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    description: interrupt mapping for EOC(data ready) pin
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@29 {
+            compatible = "asc,dlhl60d";
+            reg = <0x29>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <10 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/dts/Bindings/iio/proximity/parallax-ping.yaml b/dts/Bindings/iio/proximity/parallax-ping.yaml
new file mode 100644
index 0000000000..a079c9921a
--- /dev/null
+++ b/dts/Bindings/iio/proximity/parallax-ping.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallax PING))) and LaserPING range finder
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Bit-banging driver using one GPIO:
+  - ping-gpios is raised by the driver to start measurement
+  - direction of ping-gpio is then switched into input with an interrupt
+    for receiving distance value as PWM signal
+
+  Specifications about the devices can be found at:
+  http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
+  http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
+
+properties:
+  compatible:
+    enum:
+      - parallax,ping
+      - parallax,laserping
+
+  ping-gpios:
+    description:
+      Definition of the GPIO for the triggering and echo (output and input)
+      This GPIO is set for about 5 us by the driver to tell the device it
+      should initiate the measurement cycle. Afterwards the GPIO is switched
+      to input direction with an interrupt. The device sets it and the
+      length of the input signal corresponds to the measured distance.
+      It needs to be an GPIO which is able to deliver an interrupt because
+      the time between two interrupts is measured in the driver.
+      See Documentation/devicetree/bindings/gpio/gpio.txt for information
+      on how to specify a consumer gpio.
+    maxItems: 1
+
+required:
+  - compatible
+  - ping-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    proximity {
+        compatible = "parallax,laserping";
+        ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/dts/Bindings/iio/temperature/maxim_thermocouple.txt b/dts/Bindings/iio/temperature/maxim_thermocouple.txt
index 28bc5c4d96..bb85cd0e03 100644
--- a/dts/Bindings/iio/temperature/maxim_thermocouple.txt
+++ b/dts/Bindings/iio/temperature/maxim_thermocouple.txt
@@ -5,7 +5,10 @@ Maxim thermocouple support
 
 Required properties:
 
-	- compatible: must be "maxim,max31855" or "maxim,max6675"
+	- compatible: must be "maxim,max6675" or one of the following:
+	   "maxim,max31855k", "maxim,max31855j", "maxim,max31855n",
+	   "maxim,max31855s", "maxim,max31855t", "maxim,max31855e",
+	   "maxim,max31855r"; the generic "max,max31855" is deprecated.
 	- reg: SPI chip select number for the device
 	- spi-max-frequency: must be 4300000
 	- spi-cpha: must be defined for max6675 to enable SPI mode 1
@@ -15,7 +18,7 @@ Required properties:
 Example:
 
 	max31855@0 {
-		compatible = "maxim,max31855";
+		compatible = "maxim,max31855k";
 		reg = <0>;
 		spi-max-frequency = <4300000>;
 	};
diff --git a/dts/Bindings/input/gpio-vibrator.yaml b/dts/Bindings/input/gpio-vibrator.yaml
index 903475f52d..b98bf9363c 100644
--- a/dts/Bindings/input/gpio-vibrator.yaml
+++ b/dts/Bindings/input/gpio-vibrator.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/input/gpio-vibrator.yaml#
+$id: http://devicetree.org/schemas/input/gpio-vibrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: GPIO vibrator
diff --git a/dts/Bindings/input/touchscreen/edt-ft5x06.txt b/dts/Bindings/input/touchscreen/edt-ft5x06.txt
index 0f6950073d..0e57315e9c 100644
--- a/dts/Bindings/input/touchscreen/edt-ft5x06.txt
+++ b/dts/Bindings/input/touchscreen/edt-ft5x06.txt
@@ -36,6 +36,8 @@ Optional properties:
  - pinctrl-0:   a phandle pointing to the pin settings for the
                 control gpios
 
+ - wakeup-source: If present the device will act as wakeup-source
+
  - threshold:   allows setting the "click"-threshold in the range
                 from 0 to 80.
 
diff --git a/dts/Bindings/input/touchscreen/goodix.txt b/dts/Bindings/input/touchscreen/goodix.txt
deleted file mode 100644
index fc03ea4cf5..0000000000
--- a/dts/Bindings/input/touchscreen/goodix.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Device tree bindings for Goodix GT9xx series touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "goodix,gt1151"
-				 or "goodix,gt5663"
-				 or "goodix,gt5688"
-				 or "goodix,gt911"
-				 or "goodix,gt9110"
-				 or "goodix,gt912"
-				 or "goodix,gt927"
-				 or "goodix,gt9271"
-				 or "goodix,gt928"
-				 or "goodix,gt967"
- - reg			: I2C address of the chip. Should be 0x5d or 0x14
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - irq-gpios		: GPIO pin used for IRQ. The driver uses the
-			  interrupt gpio pin as output to reset the device.
- - reset-gpios		: GPIO pin used for reset
- - AVDD28-supply	: Analog power supply regulator on AVDD28 pin
- - VDDIO-supply		: GPIO power supply regulator on VDDIO pin
- - touchscreen-inverted-x
- - touchscreen-inverted-y
- - touchscreen-size-x
- - touchscreen-size-y
- - touchscreen-swapped-x-y
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		gt928@5d {
-			compatible = "goodix,gt928";
-			reg = <0x5d>;
-			interrupt-parent = <&gpio>;
-			interrupts = <0 0>;
-
-			irq-gpios = <&gpio1 0 0>;
-			reset-gpios = <&gpio1 1 0>;
-		};
-
-		/* ... */
-	};
diff --git a/dts/Bindings/input/touchscreen/goodix.yaml b/dts/Bindings/input/touchscreen/goodix.yaml
new file mode 100644
index 0000000000..d7c3262b24
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/goodix.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT9xx series touchscreen controller Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt1151
+      - goodix,gt5663
+      - goodix,gt5688
+      - goodix,gt911
+      - goodix,gt9110
+      - goodix,gt912
+      - goodix,gt927
+      - goodix,gt9271
+      - goodix,gt928
+      - goodix,gt967
+
+  reg:
+    enum: [ 0x5d, 0x14 ]
+
+  interrupts:
+    maxItems: 1
+
+  irq-gpios:
+    description: GPIO pin used for IRQ.
+                 The driver uses the interrupt gpio pin as
+                 output to reset the device.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  AVDD28-supply:
+    description: Analog power supply regulator on AVDD28 pin
+
+  VDDIO-supply:
+    description: GPIO power supply regulator on VDDIO pin
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+- |
+    i2c@00000000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      gt928@5d {
+        compatible = "goodix,gt928";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <0 0>;
+        irq-gpios = <&gpio1 0 0>;
+        reset-gpios = <&gpio1 1 0>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/input/touchscreen/touchscreen.txt b/dts/Bindings/input/touchscreen/touchscreen.txt
index 8641a2d708..e1adb902d5 100644
--- a/dts/Bindings/input/touchscreen/touchscreen.txt
+++ b/dts/Bindings/input/touchscreen/touchscreen.txt
@@ -1,39 +1 @@
-General Touchscreen Properties:
-
-Optional properties for Touchscreens:
- - touchscreen-min-x		: minimum x coordinate reported (0 if not set)
- - touchscreen-min-y		: minimum y coordinate reported (0 if not set)
- - touchscreen-size-x		: horizontal resolution of touchscreen
-				  (maximum x coordinate reported + 1)
- - touchscreen-size-y		: vertical resolution of touchscreen
-				  (maximum y coordinate reported + 1)
- - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
-				  dependent on the controller)
- - touchscreen-min-pressure	: minimum pressure on the touchscreen to be
-				  achieved in order for the touchscreen
-				  driver to report a touch event.
- - touchscreen-fuzz-x		: horizontal noise value of the absolute input
-				  device (in pixels)
- - touchscreen-fuzz-y		: vertical noise value of the absolute input
-				  device (in pixels)
- - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
-				  device (arbitrary range dependent on the
-				  controller)
- - touchscreen-average-samples : Number of data samples which are averaged
-				  for each read (valid values dependent on the
-				  controller)
- - touchscreen-inverted-x	: X axis is inverted (boolean)
- - touchscreen-inverted-y	: Y axis is inverted (boolean)
- - touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
-				  Swapping is done after inverting the axis
- - touchscreen-x-mm		: horizontal length in mm of the touchscreen
- - touchscreen-y-mm		: vertical length in mm of the touchscreen
-
-Deprecated properties for Touchscreens:
- - x-size			: deprecated name for touchscreen-size-x
- - y-size			: deprecated name for touchscreen-size-y
- - moving-threshold		: deprecated name for a combination of
-				  touchscreen-fuzz-x and touchscreen-fuzz-y
- - contact-threshold		: deprecated name for touchscreen-fuzz-pressure
- - x-invert			: deprecated name for touchscreen-inverted-x
- - y-invert			: deprecated name for touchscreen-inverted-y
+See touchscreen.yaml
diff --git a/dts/Bindings/input/touchscreen/touchscreen.yaml b/dts/Bindings/input/touchscreen/touchscreen.yaml
new file mode 100644
index 0000000000..d7dac16a39
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/touchscreen.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common touchscreen Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+properties:
+  touchscreen-min-x:
+    description: minimum x coordinate reported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  touchscreen-min-y:
+    description: minimum y coordinate reported
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  touchscreen-size-x:
+    description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-size-y:
+    description: vertical resolution of touchscreen (maximum y coordinate reported + 1)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-max-pressure:
+    description: maximum reported pressure (arbitrary range dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-min-pressure:
+    description: minimum pressure on the touchscreen to be achieved in order for the
+                 touchscreen driver to report a touch event.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-x:
+    description: horizontal noise value of the absolute input device (in pixels)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-y:
+    description: vertical noise value of the absolute input device (in pixels)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-fuzz-pressure:
+    description: pressure noise value of the absolute input device (arbitrary range
+                 dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-average-samples:
+    description: Number of data samples which are averaged for each read (valid values
+                 dependent on the controller)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-inverted-x:
+    description: X axis is inverted
+    type: boolean
+
+  touchscreen-inverted-y:
+    description: Y axis is inverted
+    type: boolean
+
+  touchscreen-swapped-x-y:
+    description: X and Y axis are swapped
+                 Swapping is done after inverting the axis
+    type: boolean
+
+  touchscreen-x-mm:
+    description: horizontal length in mm of the touchscreen
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  touchscreen-y-mm:
+    description: vertical length in mm of the touchscreen
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+  touchscreen-size-x: [ touchscreen-size-y ]
+  touchscreen-size-y: [ touchscreen-size-x ]
+  touchscreen-x-mm: [ touchscreen-y-mm ]
+  touchscreen-y-mm: [ touchscreen-x-mm ]
diff --git a/dts/Bindings/interconnect/qcom,msm8916.yaml b/dts/Bindings/interconnect/qcom,msm8916.yaml
new file mode 100644
index 0000000000..4107e60cab
--- /dev/null
+++ b/dts/Bindings/interconnect/qcom,msm8916.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 Network-On-Chip interconnect
+
+maintainers:
+  - Georgi Djakov <georgi.djakov@linaro.org>
+
+description: |
+   The Qualcomm MSM8916 interconnect providers support adjusting the
+   bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8916-bimc
+      - qcom,msm8916-pcnoc
+      - qcom,msm8916-snoc
+
+  reg:
+    maxItems: 1
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/qcom,rpmcc.h>
+
+      bimc: interconnect@400000 {
+              compatible = "qcom,msm8916-bimc";
+              reg = <0x00400000 0x62000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
+      };
+
+      pcnoc: interconnect@500000 {
+              compatible = "qcom,msm8916-pcnoc";
+              reg = <0x00500000 0x11000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+                       <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+      };
+
+      snoc: interconnect@580000 {
+              compatible = "qcom,msm8916-snoc";
+              reg = <0x00580000 0x14000>;
+              #interconnect-cells = <1>;
+              clock-names = "bus", "bus_a";
+              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
+      };
diff --git a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 684bb1cd75..23b18b92c5 100644
--- a/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/dts/Bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -17,6 +17,7 @@ Required properties:
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
+    "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/dts/Bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt b/dts/Bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
new file mode 100644
index 0000000000..251ed44171
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
@@ -0,0 +1,23 @@
+Aspeed AST25XX and AST26XX SCU Interrupt Controller
+
+Required Properties:
+ - #interrupt-cells		: must be 1
+ - compatible			: must be "aspeed,ast2500-scu-ic",
+				  "aspeed,ast2600-scu-ic0" or
+				  "aspeed,ast2600-scu-ic1"
+ - interrupts			: interrupt from the parent controller
+ - interrupt-controller		: indicates that the controller receives and
+				  fires new interrupts for child busses
+
+Example:
+
+    syscon@1e6e2000 {
+        ranges = <0 0x1e6e2000 0x1a8>;
+
+        scu_ic: interrupt-controller@18 {
+            #interrupt-cells = <1>;
+            compatible = "aspeed,ast2500-scu-ic";
+            interrupts = <21>;
+            interrupt-controller;
+        };
+    };
diff --git a/dts/Bindings/interrupt-controller/fsl,intmux.yaml b/dts/Bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 0000000000..43c6effbb5
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-intmux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Should contain the parent interrupt lines (up to 8) used to multiplex
+      the input interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+  clocks:
+    description: ipg clock.
+
+  clock-names:
+    const: ipg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@37400000 {
+        compatible = "fsl,imx-intmux";
+        reg = <0x37400000 0x1000>;
+        interrupts = <0 16 4>,
+                     <0 17 4>,
+                     <0 18 4>,
+                     <0 19 4>,
+                     <0 20 4>,
+                     <0 21 4>,
+                     <0 22 4>,
+                     <0 23 4>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <2>;
+        clocks = <&clk>;
+        clock-names = "ipg";
+    };
diff --git a/dts/Bindings/iommu/iommu.txt b/dts/Bindings/iommu/iommu.txt
index 5a8b4624de..3c36334e4f 100644
--- a/dts/Bindings/iommu/iommu.txt
+++ b/dts/Bindings/iommu/iommu.txt
@@ -86,6 +86,12 @@ have a means to turn off translation. But it is invalid in such cases to
 disable the IOMMU's device tree node in the first place because it would
 prevent any driver from properly setting up the translations.
 
+Optional properties:
+--------------------
+- pasid-num-bits: Some masters support multiple address spaces for DMA, by
+  tagging DMA transactions with an address space identifier. By default,
+  this is 0, which means that the device only has one address space.
+
 
 Notes:
 ======
diff --git a/dts/Bindings/leds/common.txt b/dts/Bindings/leds/common.txt
index 9fa6f9795d..26d770ef36 100644
--- a/dts/Bindings/leds/common.txt
+++ b/dts/Bindings/leds/common.txt
@@ -1,173 +1 @@
-* Common leds properties.
-
-LED and flash LED devices provide the same basic functionality as current
-regulators, but extended with LED and flash LED specific features like
-blinking patterns, flash timeout, flash faults and external flash strobe mode.
-
-Many LED devices expose more than one current output that can be connected
-to one or more discrete LED component. Since the arrangement of connections
-can influence the way of the LED device initialization, the LED components
-have to be tightly coupled with the LED device binding. They are represented
-by child nodes of the parent LED device binding.
-
-
-Optional properties for child nodes:
-- led-sources : List of device current outputs the LED is connected to. The
-		outputs are identified by the numbers that must be defined
-		in the LED device binding documentation.
-
-- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions
-	    from the header include/dt-bindings/leds/common.h.
-	    If there is no matching LED_FUNCTION available, add a new one.
-
-- color : Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions
-	  from the header include/dt-bindings/leds/common.h.
-	  If there is no matching LED_COLOR_ID available, add a new one.
-
-- function-enumerator: Integer to be used when more than one instance
-                       of the same function is needed, differing only with
-		       an ordinal number.
-
-- label : The label for this LED. If omitted, the label is taken from the node
-	  name (excluding the unit address). It has to uniquely identify
-	  a device, i.e. no other LED class device can be assigned the same
-	  label. This property is deprecated - use 'function' and 'color'
-	  properties instead. function-enumerator has no effect when this
-	  property is present.
-
-- default-state : The initial state of the LED. Valid values are "on", "off",
-  and "keep". If the LED is already on or off and the default-state property is
-  set the to same value, then no glitch should be produced where the LED
-  momentarily turns off (or on). The "keep" setting will keep the LED at
-  whatever its current state is, without producing a glitch.  The default is
-  off if this property is not present.
-
-- linux,default-trigger :  This parameter, if present, is a
-    string defining the trigger assigned to the LED.  Current triggers are:
-     "backlight" - LED will act as a back-light, controlled by the framebuffer
-		   system
-     "default-on" - LED will turn on (but for leds-gpio see "default-state"
-		    property in Documentation/devicetree/bindings/leds/leds-gpio.txt)
-     "heartbeat" - LED "double" flashes at a load average based rate
-     "disk-activity" - LED indicates disk activity
-     "ide-disk" - LED indicates IDE disk activity (deprecated),
-                  in new implementations use "disk-activity"
-     "timer" - LED flashes at a fixed, configurable rate
-     "pattern" - LED alters the brightness for the specified duration with one
-                 software timer (requires "led-pattern" property)
-
-- led-pattern : Array of integers with default pattern for certain triggers.
-                Each trigger may parse this property differently:
-                - one-shot : two numbers specifying delay on and delay off (in ms),
-                - timer : two numbers specifying delay on and delay off (in ms),
-                - pattern : the pattern is given by a series of tuples, of
-                  brightness and duration (in ms).  The exact format is
-                  described in:
-                  Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
-
-
-- led-max-microamp : Maximum LED supply current in microamperes. This property
-                     can be made mandatory for the board configurations
-                     introducing a risk of hardware damage in case an excessive
-                     current is set.
-                     For flash LED controllers with configurable current this
-                     property is mandatory for the LEDs in the non-flash modes
-                     (e.g. torch or indicator).
-
-- panic-indicator : This property specifies that the LED should be used,
-		    if at all possible, as a panic indicator.
-
-- trigger-sources : List of devices which should be used as a source triggering
-		    this LED activity. Some LEDs can be related to a specific
-		    device and should somehow indicate its state. E.g. USB 2.0
-		    LED may react to device(s) in a USB 2.0 port(s).
-		    Another common example is switch or router with multiple
-		    Ethernet ports each of them having its own LED assigned
-		    (assuming they are not hardwired). In such cases this
-		    property should contain phandle(s) of related source
-		    device(s).
-		    In many cases LED can be related to more than one device
-		    (e.g. one USB LED vs. multiple USB ports). Each source
-		    should be represented by a node in the device tree and be
-		    referenced by a phandle and a set of phandle arguments. A
-		    length of arguments should be specified by the
-		    #trigger-source-cells property in the source node.
-
-Required properties for flash LED child nodes:
-- flash-max-microamp : Maximum flash LED supply current in microamperes.
-- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
-                         LED is turned off.
-
-For controllers that have no configurable current the flash-max-microamp
-property can be omitted.
-For controllers that have no configurable timeout the flash-max-timeout-us
-property can be omitted.
-
-* Trigger source providers
-
-Each trigger source should be represented by a device tree node. It may be e.g.
-a USB port or an Ethernet device.
-
-Required properties for trigger source:
-- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for
-			  nodes of simple trigger sources (e.g. a specific USB
-			  port).
-
-* Examples
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@0 {
-	compatible = "gpio-leds";
-
-	led0 {
-		function = LED_FUNCTION_STATUS;
-		linux,default-trigger = "heartbeat";
-		gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	led1 {
-		function = LED_FUNCTION_USB;
-		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		trigger-sources = <&ohci_port1>, <&ehci_port1>;
-	};
-};
-
-led-controller@0 {
-	compatible = "maxim,max77693-led";
-
-	led {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-sources = <0>, <1>;
-		led-max-microamp = <50000>;
-		flash-max-microamp = <320000>;
-		flash-max-timeout-us = <500000>;
-	};
-};
-
-led-controller@30 {
-        compatible = "panasonic,an30259a";
-        reg = <0x30>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        led@1 {
-		reg = <1>;
-		linux,default-trigger = "heartbeat";
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <1>;
-        };
-
-        led@2 {
-		reg = <2>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <2>;
-        };
-
-        led@3 {
-		reg = <3>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <3>;
-        };
-};
+This file has moved to ./common.yaml.
diff --git a/dts/Bindings/leds/common.yaml b/dts/Bindings/leds/common.yaml
new file mode 100644
index 0000000000..d97d099b87
--- /dev/null
+++ b/dts/Bindings/leds/common.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds properties
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  LED and flash LED devices provide the same basic functionality as current
+  regulators, but extended with LED and flash LED specific features like
+  blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+  Many LED devices expose more than one current output that can be connected
+  to one or more discrete LED component. Since the arrangement of connections
+  can influence the way of the LED device initialization, the LED components
+  have to be tightly coupled with the LED device binding. They are represented
+  by child nodes of the parent LED device binding.
+
+properties:
+  led-sources:
+    description:
+      List of device current outputs the LED is connected to. The outputs are
+      identified by the numbers that must be defined in the LED device binding
+      documentation.
+    $ref: /schemas/types.yaml#definitions/uint32-array
+
+  function:
+    description:
+      LED function. Use one of the LED_FUNCTION_* prefixed definitions
+      from the header include/dt-bindings/leds/common.h. If there is no
+      matching LED_FUNCTION available, add a new one.
+    $ref: /schemas/types.yaml#definitions/string
+
+  color:
+    description:
+      Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
+      the header include/dt-bindings/leds/common.h. If there is no matching
+      LED_COLOR_ID available, add a new one.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32
+    minimum: 0
+    maximum: 8
+
+  function-enumerator:
+    description:
+      Integer to be used when more than one instance of the same function is
+      needed, differing only with an ordinal number.
+    $ref: /schemas/types.yaml#definitions/uint32
+
+  label:
+    description:
+      The label for this LED. If omitted, the label is taken from the node name
+      (excluding the unit address). It has to uniquely identify a device, i.e.
+      no other LED class device can be assigned the same label. This property is
+      deprecated - use 'function' and 'color' properties instead.
+      function-enumerator has no effect when this property is present.
+
+  default-state:
+    description:
+      The initial state of the LED. If the LED is already on or off and the
+      default-state property is set the to same value, then no glitch should be
+      produced where the LED momentarily turns off (or on). The "keep" setting
+      will keep the LED at whatever its current state is, without producing a
+      glitch.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+      - on
+      - off
+      - keep
+    default: off
+
+  linux,default-trigger:
+    description:
+      This parameter, if present, is a string defining the trigger assigned to
+      the LED.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/string
+    enum:
+        # LED will act as a back-light, controlled by the framebuffer system
+      - backlight
+        # LED will turn on (but for leds-gpio see "default-state" property in
+        # Documentation/devicetree/bindings/leds/leds-gpio.txt)
+      - default-on
+        # LED "double" flashes at a load average based rate
+      - heartbeat
+        # LED indicates disk activity
+      - disk-activity
+        # LED indicates IDE disk activity (deprecated), in new implementations
+        # use "disk-activity"
+      - ide-disk
+        # LED flashes at a fixed, configurable rate
+      - timer
+        # LED alters the brightness for the specified duration with one software
+        # timer (requires "led-pattern" property)
+      - pattern
+
+  led-pattern:
+    description: |
+      Array of integers with default pattern for certain triggers.
+
+      Each trigger may parse this property differently:
+        - one-shot : two numbers specifying delay on and delay off (in ms),
+        - timer : two numbers specifying delay on and delay off (in ms),
+        - pattern : the pattern is given by a series of tuples, of
+          brightness and duration (in ms).  The exact format is
+          described in:
+          Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint32-matrix
+    items:
+      minItems: 2
+      maxItems: 2
+
+  led-max-microamp:
+    description:
+      Maximum LED supply current in microamperes. This property can be made
+      mandatory for the board configurations introducing a risk of hardware
+      damage in case an excessive current is set.
+      For flash LED controllers with configurable current this property is
+      mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
+
+  panic-indicator:
+    description:
+      This property specifies that the LED should be used, if at all possible,
+      as a panic indicator.
+    type: boolean
+
+  trigger-sources:
+    description: |
+      List of devices which should be used as a source triggering this LED
+      activity. Some LEDs can be related to a specific device and should somehow
+      indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0
+      port(s).
+      Another common example is switch or router with multiple Ethernet ports
+      each of them having its own LED assigned (assuming they are not
+      hardwired). In such cases this property should contain phandle(s) of
+      related source device(s).
+      In many cases LED can be related to more than one device (e.g. one USB LED
+      vs. multiple USB ports). Each source should be represented by a node in
+      the device tree and be referenced by a phandle and a set of phandle
+      arguments. A length of arguments should be specified by the
+      #trigger-source-cells property in the source node.
+    $ref: /schemas/types.yaml#definitions/phandle-array
+
+  # Required properties for flash LED child nodes:
+  flash-max-microamp:
+    description:
+      Maximum flash LED supply current in microamperes. Required for flash LED
+      nodes with configurable current.
+
+  flash-max-timeout-us:
+    description:
+      Maximum timeout in microseconds after which the flash LED is turned off.
+      Required for flash LED nodes with configurable timeout.
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "gpio-leds";
+
+        led0 {
+            function = LED_FUNCTION_STATUS;
+            linux,default-trigger = "heartbeat";
+            gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+        };
+
+        led1 {
+            function = LED_FUNCTION_USB;
+            gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+            trigger-sources = <&ohci_port1>, <&ehci_port1>;
+        };
+    };
+
+    led-controller@0 {
+        compatible = "maxim,max77693-led";
+        reg = <0 0x100>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-sources = <0>, <1>;
+            led-max-microamp = <50000>;
+            flash-max-microamp = <320000>;
+            flash-max-timeout-us = <500000>;
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "panasonic,an30259a";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                linux,default-trigger = "heartbeat";
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <1>;
+            };
+
+            led@2 {
+                reg = <2>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <2>;
+            };
+
+            led@3 {
+                reg = <3>;
+                function = LED_FUNCTION_INDICATOR;
+                function-enumerator = <3>;
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/leds/irled/spi-ir-led.txt b/dts/Bindings/leds/irled/spi-ir-led.txt
index 21882c8d4b..83ff1b4d70 100644
--- a/dts/Bindings/leds/irled/spi-ir-led.txt
+++ b/dts/Bindings/leds/irled/spi-ir-led.txt
@@ -8,7 +8,7 @@ Required properties:
 	- compatible: should be "ir-spi-led".
 
 Optional properties:
-	- duty-cycle: 8 bit balue that represents the percentage of one period
+	- duty-cycle: 8 bit value that represents the percentage of one period
 	  in which the signal is active.  It can be 50, 60, 70, 75, 80 or 90.
 	- led-active-low: boolean value that specifies whether the output is
 	  negated with a NOT gate.
diff --git a/dts/Bindings/leds/leds-gpio.txt b/dts/Bindings/leds/leds-gpio.txt
deleted file mode 100644
index d21281b63d..0000000000
--- a/dts/Bindings/leds/leds-gpio.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-LEDs connected to GPIO lines
-
-Required properties:
-- compatible : should be "gpio-leds".
-
-Each LED is represented as a sub-node of the gpio-leds device.  Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs should be
-  indicated using flags in the GPIO specifier.
-- function :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- color :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- label :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-- linux,default-trigger :  (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- default-state:  (optional) The initial state of the LED.
-  see Documentation/devicetree/bindings/leds/common.txt
-- retain-state-suspended: (optional) The suspend state can be retained.Such
-  as charge-led gpio.
-- retain-state-shutdown: (optional) Retain the state of the LED on shutdown.
-  Useful in BMC systems, for example when the BMC is rebooted while the host
-  remains up.
-- panic-indicator : (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-leds {
-	compatible = "gpio-leds";
-	led0 {
-		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "disk-activity";
-		function = LED_FUNCTION_DISK;
-	};
-
-	led1 {
-		gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
-		/* Keep LED on if BIOS detected hardware fault */
-		default-state = "keep";
-		function = LED_FUNCTION_FAULT;
-	};
-};
-
-run-control {
-	compatible = "gpio-leds";
-	led0 {
-		gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_RED>;
-		default-state = "off";
-	};
-	led1 {
-		gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		default-state = "on";
-	};
-};
-
-leds {
-	compatible = "gpio-leds";
-
-	led0 {
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "max8903-charger-charging";
-		retain-state-suspended;
-		function = LED_FUNCTION_CHARGE;
-	};
-};
diff --git a/dts/Bindings/leds/leds-gpio.yaml b/dts/Bindings/leds/leds-gpio.yaml
new file mode 100644
index 0000000000..0e75b185dd
--- /dev/null
+++ b/dts/Bindings/leds/leds-gpio.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to GPIO lines
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each LED is represented as a sub-node of the gpio-leds device.  Each
+  node's name represents the name of the corresponding LED.
+
+properties:
+  compatible:
+    const: gpio-leds
+
+patternProperties:
+  # The first form is preferred, but fall back to just 'led' anywhere in the
+  # node name to at least catch some child nodes.
+  "(^led-[0-9a-f]$|led)":
+    type: object
+
+    allOf:
+      - $ref: common.yaml#
+
+    properties:
+      gpios:
+        maxItems: 1
+
+      retain-state-suspended:
+        description:
+          The suspend state can be retained.Such as charge-led gpio.
+        type: boolean
+
+      retain-state-shutdown:
+        description:
+          Retain the state of the LED on shutdown. Useful in BMC systems, for
+          example when the BMC is rebooted while the host remains up.
+        type: boolean
+
+    required:
+      - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    leds {
+        compatible = "gpio-leds";
+        led-0 {
+            gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+            linux,default-trigger = "disk-activity";
+            function = LED_FUNCTION_DISK;
+        };
+
+        led-1 {
+            gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+            /* Keep LED on if BIOS detected hardware fault */
+            default-state = "keep";
+            function = LED_FUNCTION_FAULT;
+        };
+    };
+
+    run-control {
+        compatible = "gpio-leds";
+        led-0 {
+            gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+        };
+        led-1 {
+            gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+    };
+
+...
diff --git a/dts/Bindings/leds/leds-lm3692x.txt b/dts/Bindings/leds/leds-lm3692x.txt
index 4c2d923f87..501468aa4d 100644
--- a/dts/Bindings/leds/leds-lm3692x.txt
+++ b/dts/Bindings/leds/leds-lm3692x.txt
@@ -18,6 +18,10 @@ Required properties:
 Optional properties:
 	- enable-gpios : gpio pin to enable/disable the device.
 	- vled-supply : LED supply
+	- ti,ovp-microvolt: Overvoltage protection in
+	    micro-volt, can be 17000000, 21000000, 25000000 or
+	    29000000. If ti,ovp-microvolt is not specified it
+	    defaults to 29000000.
 
 Required child properties:
 	- reg : 0 - Will enable all LED sync paths
@@ -31,6 +35,8 @@ Optional child properties:
 	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
 	- linux,default-trigger :
 	   see Documentation/devicetree/bindings/leds/common.txt
+	- led-max-microamp :
+	   see Documentation/devicetree/bindings/leds/common.txt
 
 Example:
 
@@ -44,12 +50,14 @@ led-controller@36 {
 
 	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	vled-supply = <&vbatt>;
+	ti,ovp-microvolt = <29000000>;
 
 	led@0 {
 		reg = <0>;
 		function = LED_FUNCTION_BACKLIGHT;
 		color = <LED_COLOR_ID_WHITE>;
 		linux,default-trigger = "backlight";
+		led-max-microamp = <20000>;
 	};
 }
 
diff --git a/dts/Bindings/leds/rohm,bd71828-leds.yaml b/dts/Bindings/leds/rohm,bd71828-leds.yaml
new file mode 100644
index 0000000000..b50f4bcc98
--- /dev/null
+++ b/dts/Bindings/leds/rohm,bd71828-leds.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit LED driver
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  This module is part of the ROHM BD71828 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+  The LED controller is represented as a sub-node of the PMIC node on the device
+  tree.
+
+  The device has two LED outputs referred as GRNLED and AMBLED in data-sheet.
+
+select: false
+
+properties:
+  compatible:
+    const: rohm,bd71828-leds
+
+patternProperties:
+  "^led-[1-2]$":
+    type: object
+    description:
+      Properties for a single LED.
+    properties:
+      #allOf:
+        #- $ref: "common.yaml#"
+      rohm,led-compatible:
+        description: LED identification string
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/string"
+          - enum:
+            - bd71828-ambled
+            - bd71828-grnled
+      function:
+        description:
+          Purpose of LED as defined in dt-bindings/leds/common.h
+        $ref: "/schemas/types.yaml#/definitions/string"
+      color:
+        description:
+          LED colour as defined in dt-bindings/leds/common.h
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+  - compatible
diff --git a/dts/Bindings/leds/trigger-source.yaml b/dts/Bindings/leds/trigger-source.yaml
new file mode 100644
index 0000000000..0618003e40
--- /dev/null
+++ b/dts/Bindings/leds/trigger-source.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/trigger-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trigger source providers
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  Each trigger source provider should be represented by a device tree node. It
+  may be e.g. a USB port or an Ethernet device.
+
+properties:
+  '#trigger-source-cells':
+    description:
+      Number of cells in a source trigger. Typically 0 for nodes of simple
+      trigger sources (e.g. a specific USB port).
+    enum: [ 0, 1 ]
+
+...
diff --git a/dts/Bindings/mailbox/qcom,apcs-kpss-global.txt b/dts/Bindings/mailbox/qcom,apcs-kpss-global.txt
index 0278482af6..beec612dbe 100644
--- a/dts/Bindings/mailbox/qcom,apcs-kpss-global.txt
+++ b/dts/Bindings/mailbox/qcom,apcs-kpss-global.txt
@@ -21,10 +21,11 @@ platforms.
 	Usage: required
 	Value type: <prop-encoded-array>
 	Definition: must specify the base address and size of the global block
+
 - clocks:
-	Usage: required if #clocks-cells property is present
-	Value type: <phandle>
-	Definition: phandle to the input PLL, which feeds the APCS mux/divider
+	Usage: required if #clock-names property is present
+	Value type: <phandle array>
+	Definition: phandles to the two parent clocks of the clock driver.
 
 - #mbox-cells:
 	Usage: required
@@ -36,6 +37,12 @@ platforms.
 	Value type: <u32>
 	Definition: as described in clock.txt, must be 0
 
+- clock-names:
+	Usage: required if the platform data based clock driver needs to
+	retrieve the parent clock names from device tree.
+	This will requires two mandatory clocks to be defined.
+	Value type: <string-array>
+	Definition: must be "pll" and "aux"
 
 = EXAMPLE
 The following example describes the APCS HMSS found in MSM8996 and part of the
@@ -68,3 +75,14 @@ Below is another example of the APCS binding on MSM8916 platforms:
 		clocks = <&a53pll>;
 		#clock-cells = <0>;
 	};
+
+Below is another example of the APCS binding on QCS404 platforms:
+
+	apcs_glb: mailbox@b011000 {
+		compatible = "qcom,qcs404-apcs-apps-global", "syscon";
+		reg = <0x0b011000 0x1000>;
+		#mbox-cells = <1>;
+		clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+		clock-names = "pll", "aux";
+		#clock-cells = <0>;
+	};
diff --git a/dts/Bindings/media/allwinner,sun4i-a10-csi.yaml b/dts/Bindings/media/allwinner,sun4i-a10-csi.yaml
index 0f6374ceaa..9af873b43a 100644
--- a/dts/Bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/dts/Bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -16,7 +16,15 @@ description: |-
 
 properties:
   compatible:
-    const: allwinner,sun7i-a20-csi0
+    oneOf:
+      - const: allwinner,sun4i-a10-csi1
+      - const: allwinner,sun7i-a20-csi0
+      - items:
+        - const: allwinner,sun7i-a20-csi1
+        - const: allwinner,sun4i-a10-csi1
+      - items:
+        - const: allwinner,sun8i-r40-csi0
+        - const: allwinner,sun7i-a20-csi0
 
   reg:
     maxItems: 1
@@ -25,12 +33,16 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
+    maxItems: 3
     items:
       - description: The CSI interface clock
       - description: The CSI ISP clock
       - description: The CSI DRAM clock
 
   clock-names:
+    minItems: 2
+    maxItems: 3
     items:
       - const: bus
       - const: isp
diff --git a/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml b/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml
new file mode 100644
index 0000000000..526593c8c6
--- /dev/null
+++ b/dts/Bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Video Engine Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-video-engine
+      - allwinner,sun5i-a13-video-engine
+      - allwinner,sun7i-a20-video-engine
+      - allwinner,sun8i-a33-video-engine
+      - allwinner,sun8i-h3-video-engine
+      - allwinner,sun50i-a64-video-engine
+      - allwinner,sun50i-h5-video-engine
+      - allwinner,sun50i-h6-video-engine
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: RAM Clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  allwinner,sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Phandle to the device SRAM
+
+  memory-region:
+    description:
+      CMA pool to use for buffers allocation instead of the default
+      CMA pool.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - allwinner,sram
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun7i-a20-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    video-codec@1c0e000 {
+        compatible = "allwinner,sun7i-a20-video-engine";
+        reg = <0x01c0e000 0x1000>;
+        interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+                 <&ccu CLK_DRAM_VE>;
+        clock-names = "ahb", "mod", "ram";
+        resets = <&ccu RST_VE>;
+        allwinner,sram = <&ve_sram 1>;
+    };
+
+...
diff --git a/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml b/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml
new file mode 100644
index 0000000000..1fd9b5532a
--- /dev/null
+++ b/dts/Bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-csi
+      - allwinner,sun8i-a83t-csi
+      - allwinner,sun8i-h3-csi
+      - allwinner,sun8i-v3s-csi
+      - allwinner,sun50i-a64-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: DRAM Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  # See ./video-interfaces.txt for details
+  port:
+    type: object
+
+    properties:
+      endpoint:
+        type: object
+
+        properties:
+          remote-endpoint: true
+
+          bus-width:
+            enum: [ 8, 10, 12, 16 ]
+
+          pclk-sample: true
+          hsync-active: true
+          vsync-active: true
+
+        required:
+          - bus-width
+          - remote-endpoint
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    csi1: csi@1cb4000 {
+        compatible = "allwinner,sun8i-v3s-csi";
+        reg = <0x01cb4000 0x1000>;
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>,
+                 <&ccu CLK_DRAM_CSI>;
+        clock-names = "bus",
+                      "mod",
+                      "ram";
+        resets = <&ccu RST_BUS_CSI>;
+
+        port {
+            /* Parallel bus endpoint */
+            csi1_ep: endpoint {
+                remote-endpoint = <&adv7611_ep>;
+                bus-width = <16>;
+
+                /*
+                 * If hsync-active/vsync-active are missing,
+                 * embedded BT.656 sync is used.
+                 */
+                 hsync-active = <0>; /* Active low */
+                 vsync-active = <0>; /* Active low */
+                 pclk-sample = <1>;  /* Rising */
+            };
+        };
+    };
+
+...
diff --git a/dts/Bindings/media/amlogic,gx-vdec.yaml b/dts/Bindings/media/amlogic,gx-vdec.yaml
new file mode 100644
index 0000000000..335717e159
--- /dev/null
+++ b/dts/Bindings/media/amlogic,gx-vdec.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Video Decoder
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+  - Maxime Jourdan <mjourdan@baylibre.com>
+
+description: |
+  The video decoding IP lies within the DOS memory region,
+  except for the hardware bitstream parser that makes use of an undocumented
+  region.
+
+  It makes use of the following blocks:
+  - ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
+    then feed from this VIFIFO.
+  - VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
+  - VDEC_HEVC can decode HEVC and VP9.
+
+  Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
+  concurrently.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - amlogic,gxbb-vdec # GXBB (S905)
+          - amlogic,gxl-vdec # GXL (S905X, S905D)
+          - amlogic,gxm-vdec # GXM (S912)
+        - const: amlogic,gx-vdec
+      - enum:
+        - amlogic,g12a-vdec # G12A (S905X2, S905D2)
+        - amlogic,sm1-vdec # SM1 (S905X3, S905D3)
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: vdec
+      - const: esparser
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: dos
+      - const: esparser
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: esparser
+
+  clocks:
+    minItems: 4
+    maxItems: 5
+
+  clock-names:
+    minItems: 4
+    maxItems: 5
+    items:
+      - const: dos_parser
+      - const: dos
+      - const: vdec_1
+      - const: vdec_hevc
+      - const: vdec_hevcf
+
+  amlogic,ao-sysctrl:
+    description: should point to the AOBUS sysctrl node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,gx-vdec
+
+    then:
+      properties:
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - amlogic,g12a-vdec
+              - amlogic,sm1-vdec
+
+    then:
+      properties:
+        clock-names:
+          minItems: 5
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - amlogic,ao-sysctrl
+  - amlogic,canvas
+
+examples:
+  - |
+    vdec: video-decoder@c8820000 {
+          compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+          reg = <0xc8820000 0x10000>, <0xc110a580 0xe4>;
+          reg-names = "dos", "esparser";
+          interrupts = <44>, <32>;
+          interrupt-names = "vdec", "esparser";
+          clocks = <&clk_dos_parser> ,<&clk_dos>, <&clk_vdec_1>, <&clk_vdec_hevc>;
+          clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+          resets = <&reset_parser>;
+          reset-names = "esparser";
+          amlogic,ao-sysctrl = <&sysctrl_AO>;
+          amlogic,canvas = <&canvas>;
+    };
diff --git a/dts/Bindings/media/amlogic,vdec.txt b/dts/Bindings/media/amlogic,vdec.txt
deleted file mode 100644
index 9b6aace86c..0000000000
--- a/dts/Bindings/media/amlogic,vdec.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Amlogic Video Decoder
-================================
-
-The video decoding IP lies within the DOS memory region,
-except for the hardware bitstream parser that makes use of an undocumented
-region.
-
-It makes use of the following blocks:
-
-- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks
-then feed from this VIFIFO.
-- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1.
-- VDEC_HEVC can decode HEVC and VP9.
-
-Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run
-concurrently.
-
-Device Tree Bindings:
----------------------
-
-VDEC: Video Decoder
---------------------------
-
-Required properties:
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,gxbb-vdec"
-	- GXL (S905X, S905D) : "amlogic,gxl-vdec"
-	- GXM (S912) : "amlogic,gxm-vdec"
-	followed by the common "amlogic,gx-vdec"
-- reg: base address and size of he following memory-mapped regions :
-	- dos
-	- esparser
-- reg-names: should contain the names of the previous memory regions
-- interrupts: should contain the following IRQs:
-	- vdec
-	- esparser
-- interrupt-names: should contain the names of the previous interrupts
-- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node
-- amlogic,canvas: should point to a canvas provider node
-- clocks: should contain the following clocks :
-	- dos_parser
-	- dos
-	- vdec_1
-	- vdec_hevc
-- clock-names: should contain the names of the previous clocks
-- resets: should contain the parser reset
-- reset-names: should be "esparser"
-
-Example:
-
-vdec: video-codec@c8820000 {
-	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
-	reg = <0x0 0xc8820000 0x0 0x10000>,
-	      <0x0 0xc110a580 0x0 0xe4>;
-	reg-names = "dos", "esparser";
-
-	interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
-		     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-	interrupt-names = "vdec", "esparser";
-
-	amlogic,ao-sysctrl = <&sysctrl_AO>;
-	amlogic,canvas = <&canvas>;
-
-	clocks = <&clkc CLKID_DOS_PARSER>,
-		 <&clkc CLKID_DOS>,
-		 <&clkc CLKID_VDEC_1>,
-		 <&clkc CLKID_VDEC_HEVC>;
-	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
-
-	resets = <&reset RESET_PARSER>;
-	reset-names = "esparser";
-};
diff --git a/dts/Bindings/media/atmel-isi.txt b/dts/Bindings/media/atmel-isi.txt
index 332513a151..8924c7545b 100644
--- a/dts/Bindings/media/atmel-isi.txt
+++ b/dts/Bindings/media/atmel-isi.txt
@@ -2,7 +2,7 @@ Atmel Image Sensor Interface (ISI)
 ----------------------------------
 
 Required properties for ISI:
-- compatible: must be "atmel,at91sam9g45-isi".
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
 - reg: physical base address and length of the registers set for the device.
 - interrupts: should contain IRQ line for the ISI.
 - clocks: list of clock specifiers, corresponding to entries in the clock-names
diff --git a/dts/Bindings/media/cedrus.txt b/dts/Bindings/media/cedrus.txt
deleted file mode 100644
index 20c82fb0c3..0000000000
--- a/dts/Bindings/media/cedrus.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Device-tree bindings for the VPU found in Allwinner SoCs, referred to as the
-Video Engine (VE) in Allwinner literature.
-
-The VPU can only access the first 256 MiB of DRAM, that are DMA-mapped starting
-from the DRAM base. This requires specific memory allocation and handling.
-
-Required properties:
-- compatible		: must be one of the following compatibles:
-			- "allwinner,sun4i-a10-video-engine"
-			- "allwinner,sun5i-a13-video-engine"
-			- "allwinner,sun7i-a20-video-engine"
-			- "allwinner,sun8i-a33-video-engine"
-			- "allwinner,sun8i-h3-video-engine"
-			- "allwinner,sun50i-a64-video-engine"
-			- "allwinner,sun50i-h5-video-engine"
-			- "allwinner,sun50i-h6-video-engine"
-- reg			: register base and length of VE;
-- clocks		: list of clock specifiers, corresponding to entries in
-			  the clock-names property;
-- clock-names		: should contain "ahb", "mod" and "ram" entries;
-- resets		: phandle for reset;
-- interrupts		: VE interrupt number;
-- allwinner,sram	: SRAM region to use with the VE.
-
-Optional properties:
-- memory-region		: CMA pool to use for buffers allocation instead of the
-			  default CMA pool.
-
-Example:
-
-reserved-memory {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
-	cma_pool: default-pool {
-		compatible = "shared-dma-pool";
-		size = <0x6000000>;
-		alloc-ranges = <0x4a000000 0x6000000>;
-		reusable;
-		linux,cma-default;
-	};
-};
-
-video-codec@1c0e000 {
-	compatible = "allwinner,sun7i-a20-video-engine";
-	reg = <0x01c0e000 0x1000>;
-
-	clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
-		 <&ccu CLK_DRAM_VE>;
-	clock-names = "ahb", "mod", "ram";
-
-	resets = <&ccu RST_VE>;
-	interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-	allwinner,sram = <&ve_sram 1>;
-};
diff --git a/dts/Bindings/media/exynos-jpeg-codec.txt b/dts/Bindings/media/exynos-jpeg-codec.txt
index 38941db23d..ce9a22689e 100644
--- a/dts/Bindings/media/exynos-jpeg-codec.txt
+++ b/dts/Bindings/media/exynos-jpeg-codec.txt
@@ -1,4 +1,4 @@
-Samsung S5P/EXYNOS SoC series JPEG codec
+Samsung S5P/Exynos SoC series JPEG codec
 
 Required properties:
 
diff --git a/dts/Bindings/media/exynos5-gsc.txt b/dts/Bindings/media/exynos5-gsc.txt
index bc963a6d30..1872688fa4 100644
--- a/dts/Bindings/media/exynos5-gsc.txt
+++ b/dts/Bindings/media/exynos5-gsc.txt
@@ -1,6 +1,6 @@
 * Samsung Exynos5 G-Scaler device
 
-G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs.
+G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
 
 Required properties:
 - compatible: should be one of
diff --git a/dts/Bindings/media/fsl-pxp.txt b/dts/Bindings/media/fsl-pxp.txt
index 2477e7f873..f8090e0653 100644
--- a/dts/Bindings/media/fsl-pxp.txt
+++ b/dts/Bindings/media/fsl-pxp.txt
@@ -8,7 +8,7 @@ i.MX SoCs from i.MX23 to i.MX7.
 
 Required properties:
 - compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
-  imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d.
+  imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d.
 - reg: the register base and size for the device registers
 - interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
 - clock-names: should be "axi"
diff --git a/dts/Bindings/media/hix5hd2-ir.txt b/dts/Bindings/media/hix5hd2-ir.txt
index 13ebc0fac9..ca4cf77466 100644
--- a/dts/Bindings/media/hix5hd2-ir.txt
+++ b/dts/Bindings/media/hix5hd2-ir.txt
@@ -1,7 +1,8 @@
 Device-Tree bindings for hix5hd2 ir IP
 
 Required properties:
-	- compatible: Should contain "hisilicon,hix5hd2-ir".
+	- compatible: Should contain "hisilicon,hix5hd2-ir", or:
+		- "hisilicon,hi3796cv300-ir" for Hi3796CV300 IR device.
 	- reg: Base physical address of the controller and length of memory
 	  mapped region.
 	- interrupts: interrupt-specifier for the sole interrupt generated by
diff --git a/dts/Bindings/media/rc.yaml b/dts/Bindings/media/rc.yaml
index d11380794f..a64ee038d2 100644
--- a/dts/Bindings/media/rc.yaml
+++ b/dts/Bindings/media/rc.yaml
@@ -123,6 +123,7 @@ properties:
           - rc-su3000
           - rc-tango
           - rc-tanix-tx3mini
+          - rc-tanix-tx5max
           - rc-tbs-nec
           - rc-technisat-ts35
           - rc-technisat-usb2
diff --git a/dts/Bindings/media/renesas,ceu.txt b/dts/Bindings/media/renesas,ceu.txt
deleted file mode 100644
index 3e2a2652eb..0000000000
--- a/dts/Bindings/media/renesas,ceu.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Renesas Capture Engine Unit (CEU)
-----------------------------------------------
-
-The Capture Engine Unit is the image capture interface found in the Renesas
-SH Mobile, R-Mobile and RZ SoCs.
-
-The interface supports a single parallel input with data bus width of 8 or 16
-bits.
-
-Required properties:
-- compatible: Shall be one of the following values:
-	"renesas,r7s72100-ceu" for CEU units found in RZ/A1H and RZ/A1M SoCs
-	"renesas,r8a7740-ceu" for CEU units found in R-Mobile A1 R8A7740 SoCs
-- reg: Registers address base and size.
-- interrupts: The interrupt specifier.
-
-The CEU supports a single parallel input and should contain a single 'port'
-subnode with a single 'endpoint'. Connection to input devices are modeled
-according to the video interfaces OF bindings specified in:
-[1] Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Optional endpoint properties applicable to parallel input bus described in
-the above mentioned "video-interfaces.txt" file are supported.
-
-- hsync-active: See [1] for description. If property is not present,
-  default is active high.
-- vsync-active: See [1] for description. If property is not present,
-  default is active high.
-- bus-width: See [1] for description. Accepted values are '8' and '16'.
-  If property is not present, default is '8'.
-- field-even-active: See [1] for description. If property is not present,
-  an even field is identified by a logic 0 (active-low signal).
-
-Example:
-
-The example describes the connection between the Capture Engine Unit and an
-OV7670 image sensor connected to i2c1 interface.
-
-ceu: ceu@e8210000 {
-	reg = <0xe8210000 0x209c>;
-	compatible = "renesas,r7s72100-ceu";
-	interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&vio_pins>;
-
-	status = "okay";
-
-	port {
-		ceu_in: endpoint {
-			remote-endpoint = <&ov7670_out>;
-
-			hsync-active = <1>;
-			vsync-active = <0>;
-		};
-	};
-};
-
-i2c1: i2c@fcfee400 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-
-	clock-frequency = <100000>;
-
-	ov7670: camera@21 {
-		compatible = "ovti,ov7670";
-		reg = <0x21>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vio_pins>;
-
-		reset-gpios = <&port3 11 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&port3 12 GPIO_ACTIVE_HIGH>;
-
-		port {
-			ov7670_out: endpoint {
-				remote-endpoint = <&ceu_in>;
-
-				hsync-active = <1>;
-				vsync-active = <0>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/media/renesas,ceu.yaml b/dts/Bindings/media/renesas,ceu.yaml
new file mode 100644
index 0000000000..8e9251a0f9
--- /dev/null
+++ b/dts/Bindings/media/renesas,ceu.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,ceu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Capture Engine Unit (CEU) Bindings
+
+maintainers:
+  - Jacopo Mondi <jacopo+renesas@jmondi.org>
+  - linux-renesas-soc@vger.kernel.org
+
+description: |+
+  The Capture Engine Unit is the image capture interface found in the Renesas SH
+  Mobile, R-Mobile and RZ SoCs. The interface supports a single parallel input
+  with data bus width of 8 or 16 bits.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r7s72100-ceu
+      - renesas,r8a7740-ceu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    type: object
+    additionalProperties: false
+
+    properties:
+       endpoint:
+         type: object
+         additionalProperties: false
+
+         # Properties described in
+         # Documentation/devicetree/bindings/media/video-interfaces.txt
+         properties:
+           remote-endpoint: true
+           hsync-active: true
+           vsync-active: true
+           field-even-active: false
+           bus-width:
+             enum: [8, 16]
+             default: 8
+
+         required:
+           - remote-endpoint
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ceu: ceu@e8210000 {
+        reg = <0xe8210000 0x209c>;
+        compatible = "renesas,r7s72100-ceu";
+        interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+
+        port {
+            ceu_in: endpoint {
+                remote-endpoint = <&ov7670_out>;
+                hsync-active = <1>;
+                vsync-active = <0>;
+            };
+        };
+    };
diff --git a/dts/Bindings/media/renesas,csi2.txt b/dts/Bindings/media/renesas,csi2.txt
deleted file mode 100644
index 2da6f60b2b..0000000000
--- a/dts/Bindings/media/renesas,csi2.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Renesas R-Car MIPI CSI-2
-------------------------
-
-The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
-Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the
-R-Car VIN module, which provides the video capture capabilities.
-
-Mandatory properties
---------------------
- - compatible: Must be one or more of the following
-   - "renesas,r8a774a1-csi2" for the R8A774A1 device.
-   - "renesas,r8a774b1-csi2" for the R8A774B1 device.
-   - "renesas,r8a774c0-csi2" for the R8A774C0 device.
-   - "renesas,r8a7795-csi2" for the R8A7795 device.
-   - "renesas,r8a7796-csi2" for the R8A7796 device.
-   - "renesas,r8a77965-csi2" for the R8A77965 device.
-   - "renesas,r8a77970-csi2" for the R8A77970 device.
-   - "renesas,r8a77980-csi2" for the R8A77980 device.
-   - "renesas,r8a77990-csi2" for the R8A77990 device.
-
- - reg: the register base and size for the device registers
- - interrupts: the interrupt for the device
- - clocks: A phandle + clock specifier for the module clock
- - resets: A phandle + reset specifier for the module reset
-
-The device node shall contain two 'port' child nodes according to the
-bindings defined in Documentation/devicetree/bindings/media/
-video-interfaces.txt. port@0 shall connect to the CSI-2 source. port@1
-shall connect to all the R-Car VIN modules that have a hardware
-connection to the CSI-2 receiver.
-
-- port@0- Video source (mandatory)
-	- endpoint@0 - sub-node describing the endpoint that is the video source
-
-- port@1 - VIN instances (optional)
-	- One endpoint sub-node for every R-Car VIN instance which is connected
-	  to the R-Car CSI-2 receiver.
-
-Example:
-
-	csi20: csi2@fea80000 {
-		compatible = "renesas,r8a7796-csi2";
-		reg = <0 0xfea80000 0 0x10000>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 714>;
-		power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
-		resets = <&cpg 714>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				reg = <0>;
-
-				csi20_in: endpoint@0 {
-					reg = <0>;
-					clock-lanes = <0>;
-					data-lanes = <1>;
-					remote-endpoint = <&adv7482_txb>;
-				};
-			};
-
-			port@1 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				reg = <1>;
-
-				csi20vin0: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vin0csi20>;
-				};
-				csi20vin1: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vin1csi20>;
-				};
-				csi20vin2: endpoint@2 {
-					reg = <2>;
-					remote-endpoint = <&vin2csi20>;
-				};
-				csi20vin3: endpoint@3 {
-					reg = <3>;
-					remote-endpoint = <&vin3csi20>;
-				};
-				csi20vin4: endpoint@4 {
-					reg = <4>;
-					remote-endpoint = <&vin4csi20>;
-				};
-				csi20vin5: endpoint@5 {
-					reg = <5>;
-					remote-endpoint = <&vin5csi20>;
-				};
-				csi20vin6: endpoint@6 {
-					reg = <6>;
-					remote-endpoint = <&vin6csi20>;
-				};
-				csi20vin7: endpoint@7 {
-					reg = <7>;
-					remote-endpoint = <&vin7csi20>;
-				};
-			};
-		};
-	};
diff --git a/dts/Bindings/media/renesas,csi2.yaml b/dts/Bindings/media/renesas,csi2.yaml
new file mode 100644
index 0000000000..408442a0c3
--- /dev/null
+++ b/dts/Bindings/media/renesas,csi2.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI CSI-2 receiver
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The R-Car CSI-2 receiver device provides MIPI CSI-2 capabilities for the
+  Renesas R-Car and RZ/G2 family of devices. It is used in conjunction with the
+  R-Car VIN module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,r8a774a1-csi2 # RZ/G2M
+        - renesas,r8a774b1-csi2 # RZ/G2N
+        - renesas,r8a774c0-csi2 # RZ/G2E
+        - renesas,r8a7795-csi2  # R-Car H3
+        - renesas,r8a7796-csi2  # R-Car M3-W
+        - renesas,r8a77965-csi2 # R-Car M3-N
+        - renesas,r8a77970-csi2 # R-Car V3M
+        - renesas,r8a77980-csi2 # R-Car V3H
+        - renesas,r8a77990-csi2 # R-Car E3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    type: object
+    description:
+      A node containing input and output port nodes with endpoint definitions
+      as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+
+    properties:
+      port@0:
+        type: object
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                maxItems: 1
+
+              remote-endpoint: true
+
+            required:
+              - clock-lanes
+              - data-lanes
+              - remote-endpoint
+
+            additionalProperties: false
+
+        additionalProperties: false
+
+      port@1:
+        type: object
+        description:
+          Output port node, multiple endpoints describing all the R-Car VIN
+          modules connected the CSI-2 receiver.
+
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          reg:
+            const: 1
+
+        patternProperties:
+          "^endpoint@[0-9a-f]$":
+            type: object
+
+            properties:
+              reg:
+                maxItems: 1
+
+              remote-endpoint: true
+
+            required:
+              - reg
+              - remote-endpoint
+
+            additionalProperties: false
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7796-sysc.h>
+
+    csi20: csi2@fea80000 {
+            compatible = "renesas,r8a7796-csi2";
+            reg = <0 0xfea80000 0 0x10000>;
+            interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 714>;
+            power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+            resets = <&cpg 714>;
+
+            ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                            reg = <0>;
+
+                            csi20_in: endpoint {
+                                    clock-lanes = <0>;
+                                    data-lanes = <1>;
+                                    remote-endpoint = <&adv7482_txb>;
+                            };
+                    };
+
+                    port@1 {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            reg = <1>;
+
+                            csi20vin0: endpoint@0 {
+                                    reg = <0>;
+                                    remote-endpoint = <&vin0csi20>;
+                            };
+                            csi20vin1: endpoint@1 {
+                                    reg = <1>;
+                                    remote-endpoint = <&vin1csi20>;
+                            };
+                            csi20vin2: endpoint@2 {
+                                    reg = <2>;
+                                    remote-endpoint = <&vin2csi20>;
+                            };
+                            csi20vin3: endpoint@3 {
+                                    reg = <3>;
+                                    remote-endpoint = <&vin3csi20>;
+                            };
+                            csi20vin4: endpoint@4 {
+                                    reg = <4>;
+                                    remote-endpoint = <&vin4csi20>;
+                            };
+                            csi20vin5: endpoint@5 {
+                                    reg = <5>;
+                                    remote-endpoint = <&vin5csi20>;
+                            };
+                            csi20vin6: endpoint@6 {
+                                    reg = <6>;
+                                    remote-endpoint = <&vin6csi20>;
+                            };
+                            csi20vin7: endpoint@7 {
+                                    reg = <7>;
+                                    remote-endpoint = <&vin7csi20>;
+                            };
+                    };
+            };
+    };
diff --git a/dts/Bindings/media/renesas,vin.txt b/dts/Bindings/media/renesas,vin.txt
index e30b0d4eef..5eefd62ac5 100644
--- a/dts/Bindings/media/renesas,vin.txt
+++ b/dts/Bindings/media/renesas,vin.txt
@@ -13,6 +13,7 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
    - "renesas,vin-r8a7743" for the R8A7743 device
    - "renesas,vin-r8a7744" for the R8A7744 device
    - "renesas,vin-r8a7745" for the R8A7745 device
+   - "renesas,vin-r8a77470" for the R8A77470 device
    - "renesas,vin-r8a774a1" for the R8A774A1 device
    - "renesas,vin-r8a774b1" for the R8A774B1 device
    - "renesas,vin-r8a774c0" for the R8A774C0 device
@@ -41,9 +42,6 @@ on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
  - interrupts: the interrupt for the device
  - clocks: Reference to the parent clock
 
-Additionally, an alias named vinX will need to be created to specify
-which video input device this is.
-
 The per-board settings for Gen2 and RZ/G1 platforms:
 
 - port - sub-node describing a single endpoint connected to the VIN
diff --git a/dts/Bindings/media/samsung-fimc.txt b/dts/Bindings/media/samsung-fimc.txt
index 48c599dacb..f91b9dc80e 100644
--- a/dts/Bindings/media/samsung-fimc.txt
+++ b/dts/Bindings/media/samsung-fimc.txt
@@ -1,4 +1,4 @@
-Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
+Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
 ----------------------------------------------
 
 The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
diff --git a/dts/Bindings/media/samsung-mipi-csis.txt b/dts/Bindings/media/samsung-mipi-csis.txt
index be45f0b1a4..a4149c9434 100644
--- a/dts/Bindings/media/samsung-mipi-csis.txt
+++ b/dts/Bindings/media/samsung-mipi-csis.txt
@@ -1,4 +1,4 @@
-Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS)
+Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
 -------------------------------------------------------------
 
 Required properties:
diff --git a/dts/Bindings/media/sun6i-csi.txt b/dts/Bindings/media/sun6i-csi.txt
deleted file mode 100644
index a2e3e56f02..0000000000
--- a/dts/Bindings/media/sun6i-csi.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Allwinner V3s Camera Sensor Interface
--------------------------------------
-
-Allwinner V3s SoC features a CSI module(CSI1) with parallel interface.
-
-Required properties:
-  - compatible: value must be one of:
-    * "allwinner,sun6i-a31-csi"
-    * "allwinner,sun8i-a83t-csi"
-    * "allwinner,sun8i-h3-csi"
-    * "allwinner,sun8i-v3s-csi"
-    * "allwinner,sun50i-a64-csi"
-  - reg: base address and size of the memory-mapped region.
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the CSI
-    * bus: the CSI interface clock
-    * mod: the CSI module clock
-    * ram: the CSI DRAM clock
-  - clock-names: the clock names mentioned above
-  - resets: phandles to the reset line driving the CSI
-
-The CSI node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Endpoint node properties for CSI
----------------------------------
-See the video-interfaces.txt for a detailed description of these properties.
-- remote-endpoint	: (required) a phandle to the bus receiver's endpoint
-			   node
-- bus-width:		: (required) must be 8, 10, 12 or 16
-- pclk-sample		: (optional) (default: sample on falling edge)
-- hsync-active		: (required; parallel-only)
-- vsync-active		: (required; parallel-only)
-
-Example:
-
-csi1: csi@1cb4000 {
-	compatible = "allwinner,sun8i-v3s-csi";
-	reg = <0x01cb4000 0x1000>;
-	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&ccu CLK_BUS_CSI>,
-		 <&ccu CLK_CSI1_SCLK>,
-		 <&ccu CLK_DRAM_CSI>;
-	clock-names = "bus", "mod", "ram";
-	resets = <&ccu RST_BUS_CSI>;
-
-	port {
-		/* Parallel bus endpoint */
-		csi1_ep: endpoint {
-			remote-endpoint = <&adv7611_ep>;
-			bus-width = <16>;
-
-			/* If hsync-active/vsync-active are missing,
-			   embedded BT.656 sync is used */
-			hsync-active = <0>; /* Active low */
-			vsync-active = <0>; /* Active low */
-			pclk-sample = <1>;  /* Rising */
-		};
-	};
-};
diff --git a/dts/Bindings/media/ti,cal.yaml b/dts/Bindings/media/ti,cal.yaml
new file mode 100644
index 0000000000..1ea7841795
--- /dev/null
+++ b/dts/Bindings/media/ti,cal.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,cal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+
+maintainers:
+  - Benoit Parrot <bparrot@ti.com>
+
+description: |-
+  The Camera Adaptation Layer (CAL) is a key component for image capture
+  applications. The capture module provides the system interface and the
+  processing capability to connect CSI2 image-sensor modules to the
+  DRA72x device.
+
+  CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+  should contain a 'port' child node with child 'endpoint' node. Please
+  refer to the bindings defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+properties:
+  compatible:
+    enum:
+      # for DRA72 controllers
+      - ti,dra72-cal
+      # for DRA72 controllers pre ES2.0
+      - ti,dra72-pre-es2-cal
+      # for DRA76 controllers
+      - ti,dra76-cal
+      # for AM654 controllers
+      - ti,am654-cal
+
+  reg:
+    minItems: 2
+    items:
+      - description: The CAL main register region
+      - description: The RX Core0 (DPHY0) register region
+      - description: The RX Core1 (DPHY1) register region
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: cal_top
+      - const: cal_rx_core0
+      - const: cal_rx_core1
+
+  interrupts:
+    maxItems: 1
+
+  ti,camerrx-control:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description:
+      phandle to the device control module and offset to the
+      control_camerarx_core register
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    description:
+      List of phandle and PM domain specifier as documented in
+      Documentation/devicetree/bindings/power/power_domain.txt
+    maxItems: 1
+
+  # See ./video-interfaces.txt for details
+  ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        additionalProperties: false
+
+        properties:
+          reg:
+            const: 0
+            description: CSI2 Port #0
+
+        patternProperties:
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              remote-endpoint: true
+
+        required:
+          - reg
+
+      port@1:
+        type: object
+        additionalProperties: false
+
+        properties:
+          reg:
+            const: 1
+            description: CSI2 Port #1
+
+        patternProperties:
+          endpoint:
+            type: object
+            additionalProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              remote-endpoint: true
+
+        required:
+          - reg
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ti,camerrx-control
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cal: cal@4845b000 {
+        compatible = "ti,dra72-cal";
+        reg = <0x4845B000 0x400>,
+              <0x4845B800 0x40>,
+              <0x4845B900 0x40>;
+        reg-names = "cal_top",
+                    "cal_rx_core0",
+                    "cal_rx_core1";
+        interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+        ti,camerrx-control = <&scm_conf 0xE94>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              csi2_0: port@0 {
+                    reg = <0>;
+                    csi2_phy0: endpoint {
+                           remote-endpoint = <&csi2_cam0>;
+                           clock-lanes = <0>;
+                           data-lanes = <1 2>;
+                    };
+              };
+        };
+    };
+
+    i2c5: i2c@4807c000 {
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@3c {
+               compatible = "ovti,ov5640";
+               reg = <0x3c>;
+
+               clocks = <&clk_ov5640_fixed>;
+               clock-names = "xclk";
+
+               port {
+                    csi2_cam0: endpoint {
+                            remote-endpoint = <&csi2_phy0>;
+                            clock-lanes = <0>;
+                            data-lanes = <1 2>;
+                    };
+               };
+        };
+    };
+
+...
diff --git a/dts/Bindings/media/ti-cal.txt b/dts/Bindings/media/ti-cal.txt
deleted file mode 100644
index ae9b52f375..0000000000
--- a/dts/Bindings/media/ti-cal.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
-------------------------------------------------------
-
-The Camera Adaptation Layer (CAL) is a key component for image capture
-applications. The capture module provides the system interface and the
-processing capability to connect CSI2 image-sensor modules to the
-DRA72x device.
-
-Required properties:
-- compatible: must be "ti,dra72-cal"
-- reg:	CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
-	control address space
-- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
-	     registers
-- interrupts: should contain IRQ line for the CAL;
-
-CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
-should contain a 'port' child node with child 'endpoint' node. Please
-refer to the bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-	cal: cal@4845b000 {
-		compatible = "ti,dra72-cal";
-		ti,hwmods = "cal";
-		reg = <0x4845B000 0x400>,
-		      <0x4845B800 0x40>,
-		      <0x4845B900 0x40>,
-		      <0x4A002e94 0x4>;
-		reg-names = "cal_top",
-			    "cal_rx_core0",
-			    "cal_rx_core1",
-			    "camerrx_control";
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			csi2_0: port@0 {
-				reg = <0>;
-				endpoint {
-					slave-mode;
-					remote-endpoint = <&ar0330_1>;
-				};
-			};
-			csi2_1: port@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	i2c5: i2c@4807c000 {
-		ar0330@10 {
-			compatible = "ti,ar0330";
-			reg = <0x10>;
-
-			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ar0330_1: endpoint {
-					reg = <0>;
-					clock-lanes = <1>;
-					data-lanes = <0 2 3 4>;
-					remote-endpoint = <&csi2_0>;
-				};
-			};
-		};
-	};
diff --git a/dts/Bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/dts/Bindings/memory-controllers/fsl/imx8m-ddrc.yaml
new file mode 100644
index 0000000000..c9e6c22cb5
--- /dev/null
+++ b/dts/Bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/imx8m-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8M DDR Controller
+
+maintainers:
+  - Leonard Crestez <leonard.crestez@nxp.com>
+
+description:
+  The DDRC block is integrated in i.MX8M for interfacing with DDR based
+  memories.
+
+  It supports switching between different frequencies at runtime but during
+  this process RAM itself becomes briefly inaccessible so actual frequency
+  switching is implemented by TF-A code which runs from a SRAM area.
+
+  The Linux driver for the DDRC doesn't even map registers (they're included
+  for the sake of "describing hardware"), it mostly just exposes firmware
+  capabilities through standard Linux mechanism like devfreq and OPP tables.
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - fsl,imx8mn-ddrc
+        - fsl,imx8mm-ddrc
+        - fsl,imx8mq-ddrc
+      - const: fsl,imx8m-ddrc
+
+  reg:
+    maxItems: 1
+    description:
+      Base address and size of DDRC CTL area.
+      This is not currently mapped by the imx8m-ddrc driver.
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: pll
+      - const: alt
+      - const: apb
+
+  operating-points-v2: true
+  opp-table: true
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    ddrc: memory-controller@3d400000 {
+        compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+        reg = <0x3d400000 0x400000>;
+        clock-names = "core", "pll", "alt", "apb";
+        clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+                 <&clk IMX8MM_DRAM_PLL>,
+                 <&clk IMX8MM_CLK_DRAM_ALT>,
+                 <&clk IMX8MM_CLK_DRAM_APB>;
+        operating-points-v2 = <&ddrc_opp_table>;
+    };
diff --git a/dts/Bindings/memory-controllers/nvidia,tegra124-emc.txt b/dts/Bindings/memory-controllers/nvidia,tegra124-emc.txt
deleted file mode 100644
index ba0bc3f124..0000000000
--- a/dts/Bindings/memory-controllers/nvidia,tegra124-emc.txt
+++ /dev/null
@@ -1,374 +0,0 @@
-NVIDIA Tegra124 SoC EMC (external memory controller)
-====================================================
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-emc".
-- reg : physical base address and length of the controller's registers.
-- nvidia,memory-controller : phandle of the MC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type
-(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
-being its RAM_CODE.
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
-used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
-their unit address.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate in Hz.
-- The following properties contain EMC timing characterization values
-(specified in the board documentation) :
-  - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
-  - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
-  - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
-  - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
-  - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
-  - nvidia,emc-cfg : EMC_CFG
-  - nvidia,emc-cfg-2 : EMC_CFG_2
-  - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
-  - nvidia,emc-mode-1 : Mode Register 1
-  - nvidia,emc-mode-2 : Mode Register 2
-  - nvidia,emc-mode-4 : Mode Register 4
-  - nvidia,emc-mode-reset : Mode Register 0
-  - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
-  - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
-  - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
-  - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
-  - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
-- nvidia,emc-configuration : EMC timing characterization data. These are the
-registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
-be specified, according to the board documentation:
-
-	EMC_RC
-	EMC_RFC
-	EMC_RFC_SLR
-	EMC_RAS
-	EMC_RP
-	EMC_R2W
-	EMC_W2R
-	EMC_R2P
-	EMC_W2P
-	EMC_RD_RCD
-	EMC_WR_RCD
-	EMC_RRD
-	EMC_REXT
-	EMC_WEXT
-	EMC_WDV
-	EMC_WDV_MASK
-	EMC_QUSE
-	EMC_QUSE_WIDTH
-	EMC_IBDLY
-	EMC_EINPUT
-	EMC_EINPUT_DURATION
-	EMC_PUTERM_EXTRA
-	EMC_PUTERM_WIDTH
-	EMC_PUTERM_ADJ
-	EMC_CDB_CNTL_1
-	EMC_CDB_CNTL_2
-	EMC_CDB_CNTL_3
-	EMC_QRST
-	EMC_QSAFE
-	EMC_RDV
-	EMC_RDV_MASK
-	EMC_REFRESH
-	EMC_BURST_REFRESH_NUM
-	EMC_PRE_REFRESH_REQ_CNT
-	EMC_PDEX2WR
-	EMC_PDEX2RD
-	EMC_PCHG2PDEN
-	EMC_ACT2PDEN
-	EMC_AR2PDEN
-	EMC_RW2PDEN
-	EMC_TXSR
-	EMC_TXSRDLL
-	EMC_TCKE
-	EMC_TCKESR
-	EMC_TPD
-	EMC_TFAW
-	EMC_TRPAB
-	EMC_TCLKSTABLE
-	EMC_TCLKSTOP
-	EMC_TREFBW
-	EMC_FBIO_CFG6
-	EMC_ODT_WRITE
-	EMC_ODT_READ
-	EMC_FBIO_CFG5
-	EMC_CFG_DIG_DLL
-	EMC_CFG_DIG_DLL_PERIOD
-	EMC_DLL_XFORM_DQS0
-	EMC_DLL_XFORM_DQS1
-	EMC_DLL_XFORM_DQS2
-	EMC_DLL_XFORM_DQS3
-	EMC_DLL_XFORM_DQS4
-	EMC_DLL_XFORM_DQS5
-	EMC_DLL_XFORM_DQS6
-	EMC_DLL_XFORM_DQS7
-	EMC_DLL_XFORM_DQS8
-	EMC_DLL_XFORM_DQS9
-	EMC_DLL_XFORM_DQS10
-	EMC_DLL_XFORM_DQS11
-	EMC_DLL_XFORM_DQS12
-	EMC_DLL_XFORM_DQS13
-	EMC_DLL_XFORM_DQS14
-	EMC_DLL_XFORM_DQS15
-	EMC_DLL_XFORM_QUSE0
-	EMC_DLL_XFORM_QUSE1
-	EMC_DLL_XFORM_QUSE2
-	EMC_DLL_XFORM_QUSE3
-	EMC_DLL_XFORM_QUSE4
-	EMC_DLL_XFORM_QUSE5
-	EMC_DLL_XFORM_QUSE6
-	EMC_DLL_XFORM_QUSE7
-	EMC_DLL_XFORM_ADDR0
-	EMC_DLL_XFORM_ADDR1
-	EMC_DLL_XFORM_ADDR2
-	EMC_DLL_XFORM_ADDR3
-	EMC_DLL_XFORM_ADDR4
-	EMC_DLL_XFORM_ADDR5
-	EMC_DLL_XFORM_QUSE8
-	EMC_DLL_XFORM_QUSE9
-	EMC_DLL_XFORM_QUSE10
-	EMC_DLL_XFORM_QUSE11
-	EMC_DLL_XFORM_QUSE12
-	EMC_DLL_XFORM_QUSE13
-	EMC_DLL_XFORM_QUSE14
-	EMC_DLL_XFORM_QUSE15
-	EMC_DLI_TRIM_TXDQS0
-	EMC_DLI_TRIM_TXDQS1
-	EMC_DLI_TRIM_TXDQS2
-	EMC_DLI_TRIM_TXDQS3
-	EMC_DLI_TRIM_TXDQS4
-	EMC_DLI_TRIM_TXDQS5
-	EMC_DLI_TRIM_TXDQS6
-	EMC_DLI_TRIM_TXDQS7
-	EMC_DLI_TRIM_TXDQS8
-	EMC_DLI_TRIM_TXDQS9
-	EMC_DLI_TRIM_TXDQS10
-	EMC_DLI_TRIM_TXDQS11
-	EMC_DLI_TRIM_TXDQS12
-	EMC_DLI_TRIM_TXDQS13
-	EMC_DLI_TRIM_TXDQS14
-	EMC_DLI_TRIM_TXDQS15
-	EMC_DLL_XFORM_DQ0
-	EMC_DLL_XFORM_DQ1
-	EMC_DLL_XFORM_DQ2
-	EMC_DLL_XFORM_DQ3
-	EMC_DLL_XFORM_DQ4
-	EMC_DLL_XFORM_DQ5
-	EMC_DLL_XFORM_DQ6
-	EMC_DLL_XFORM_DQ7
-	EMC_XM2CMDPADCTRL
-	EMC_XM2CMDPADCTRL4
-	EMC_XM2CMDPADCTRL5
-	EMC_XM2DQPADCTRL2
-	EMC_XM2DQPADCTRL3
-	EMC_XM2CLKPADCTRL
-	EMC_XM2CLKPADCTRL2
-	EMC_XM2COMPPADCTRL
-	EMC_XM2VTTGENPADCTRL
-	EMC_XM2VTTGENPADCTRL2
-	EMC_XM2VTTGENPADCTRL3
-	EMC_XM2DQSPADCTRL3
-	EMC_XM2DQSPADCTRL4
-	EMC_XM2DQSPADCTRL5
-	EMC_XM2DQSPADCTRL6
-	EMC_DSR_VTTGEN_DRV
-	EMC_TXDSRVTTGEN
-	EMC_FBIO_SPARE
-	EMC_ZCAL_WAIT_CNT
-	EMC_MRS_WAIT_CNT2
-	EMC_CTT
-	EMC_CTT_DURATION
-	EMC_CFG_PIPE
-	EMC_DYN_SELF_REF_CONTROL
-	EMC_QPOP
-
-Example SoC include file:
-
-/ {
-	emc@7001b000 {
-		compatible = "nvidia,tegra124-emc";
-		reg = <0x0 0x7001b000 0x0 0x1000>;
-
-		nvidia,memory-controller = <&mc>;
-	};
-};
-
-Example board file:
-
-/ {
-	emc@7001b000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emc-zcal-cnt-long = <0x00000042>;
-				nvidia,emc-auto-cal-interval = <0x001fffff>;
-				nvidia,emc-ctt-term-ctrl = <0x00000802>;
-				nvidia,emc-cfg = <0x73240000>;
-				nvidia,emc-cfg-2 = <0x000008c5>;
-				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
-				nvidia,emc-bgbias-ctl0 = <0x00000008>;
-				nvidia,emc-auto-cal-config = <0xa1430000>;
-				nvidia,emc-auto-cal-config2 = <0x00000000>;
-				nvidia,emc-auto-cal-config3 = <0x00000000>;
-				nvidia,emc-mode-reset = <0x80001221>;
-				nvidia,emc-mode-1 = <0x80100003>;
-				nvidia,emc-mode-2 = <0x80200008>;
-				nvidia,emc-mode-4 = <0x00000000>;
-
-				nvidia,emc-configuration = <
-					0x00000000 /* EMC_RC */
-					0x00000003 /* EMC_RFC */
-					0x00000000 /* EMC_RFC_SLR */
-					0x00000000 /* EMC_RAS */
-					0x00000000 /* EMC_RP */
-					0x00000004 /* EMC_R2W */
-					0x0000000a /* EMC_W2R */
-					0x00000003 /* EMC_R2P */
-					0x0000000b /* EMC_W2P */
-					0x00000000 /* EMC_RD_RCD */
-					0x00000000 /* EMC_WR_RCD */
-					0x00000003 /* EMC_RRD */
-					0x00000003 /* EMC_REXT */
-					0x00000000 /* EMC_WEXT */
-					0x00000006 /* EMC_WDV */
-					0x00000006 /* EMC_WDV_MASK */
-					0x00000006 /* EMC_QUSE */
-					0x00000002 /* EMC_QUSE_WIDTH */
-					0x00000000 /* EMC_IBDLY */
-					0x00000005 /* EMC_EINPUT */
-					0x00000005 /* EMC_EINPUT_DURATION */
-					0x00010000 /* EMC_PUTERM_EXTRA */
-					0x00000003 /* EMC_PUTERM_WIDTH */
-					0x00000000 /* EMC_PUTERM_ADJ */
-					0x00000000 /* EMC_CDB_CNTL_1 */
-					0x00000000 /* EMC_CDB_CNTL_2 */
-					0x00000000 /* EMC_CDB_CNTL_3 */
-					0x00000004 /* EMC_QRST */
-					0x0000000c /* EMC_QSAFE */
-					0x0000000d /* EMC_RDV */
-					0x0000000f /* EMC_RDV_MASK */
-					0x00000060 /* EMC_REFRESH */
-					0x00000000 /* EMC_BURST_REFRESH_NUM */
-					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
-					0x00000002 /* EMC_PDEX2WR */
-					0x00000002 /* EMC_PDEX2RD */
-					0x00000001 /* EMC_PCHG2PDEN */
-					0x00000000 /* EMC_ACT2PDEN */
-					0x00000007 /* EMC_AR2PDEN */
-					0x0000000f /* EMC_RW2PDEN */
-					0x00000005 /* EMC_TXSR */
-					0x00000005 /* EMC_TXSRDLL */
-					0x00000004 /* EMC_TCKE */
-					0x00000005 /* EMC_TCKESR */
-					0x00000004 /* EMC_TPD */
-					0x00000000 /* EMC_TFAW */
-					0x00000000 /* EMC_TRPAB */
-					0x00000005 /* EMC_TCLKSTABLE */
-					0x00000005 /* EMC_TCLKSTOP */
-					0x00000064 /* EMC_TREFBW */
-					0x00000000 /* EMC_FBIO_CFG6 */
-					0x00000000 /* EMC_ODT_WRITE */
-					0x00000000 /* EMC_ODT_READ */
-					0x106aa298 /* EMC_FBIO_CFG5 */
-					0x002c00a0 /* EMC_CFG_DIG_DLL */
-					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-					0x00064000 /* EMC_DLL_XFORM_DQS0 */
-					0x00064000 /* EMC_DLL_XFORM_DQS1 */
-					0x00064000 /* EMC_DLL_XFORM_DQS2 */
-					0x00064000 /* EMC_DLL_XFORM_DQS3 */
-					0x00064000 /* EMC_DLL_XFORM_DQS4 */
-					0x00064000 /* EMC_DLL_XFORM_DQS5 */
-					0x00064000 /* EMC_DLL_XFORM_DQS6 */
-					0x00064000 /* EMC_DLL_XFORM_DQS7 */
-					0x00064000 /* EMC_DLL_XFORM_DQS8 */
-					0x00064000 /* EMC_DLL_XFORM_DQS9 */
-					0x00064000 /* EMC_DLL_XFORM_DQS10 */
-					0x00064000 /* EMC_DLL_XFORM_DQS11 */
-					0x00064000 /* EMC_DLL_XFORM_DQS12 */
-					0x00064000 /* EMC_DLL_XFORM_DQS13 */
-					0x00064000 /* EMC_DLL_XFORM_DQS14 */
-					0x00064000 /* EMC_DLL_XFORM_DQS15 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
-					0x10000280 /* EMC_XM2CMDPADCTRL */
-					0x00000000 /* EMC_XM2CMDPADCTRL4 */
-					0x00111111 /* EMC_XM2CMDPADCTRL5 */
-					0x00000000 /* EMC_XM2DQPADCTRL2 */
-					0x00000000 /* EMC_XM2DQPADCTRL3 */
-					0x77ffc081 /* EMC_XM2CLKPADCTRL */
-					0x00000e0e /* EMC_XM2CLKPADCTRL2 */
-					0x81f1f108 /* EMC_XM2COMPPADCTRL */
-					0x07070004 /* EMC_XM2VTTGENPADCTRL */
-					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
-					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
-					0x51451400 /* EMC_XM2DQSPADCTRL3 */
-					0x00514514 /* EMC_XM2DQSPADCTRL4 */
-					0x00514514 /* EMC_XM2DQSPADCTRL5 */
-					0x51451400 /* EMC_XM2DQSPADCTRL6 */
-					0x0000003f /* EMC_DSR_VTTGEN_DRV */
-					0x00000007 /* EMC_TXDSRVTTGEN */
-					0x00000000 /* EMC_FBIO_SPARE */
-					0x00000042 /* EMC_ZCAL_WAIT_CNT */
-					0x000e000e /* EMC_MRS_WAIT_CNT2 */
-					0x00000000 /* EMC_CTT */
-					0x00000003 /* EMC_CTT_DURATION */
-					0x0000f2f3 /* EMC_CFG_PIPE */
-					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
-					0x0000000a /* EMC_QPOP */
-				>;
-			};
-		};
-	};
-};
diff --git a/dts/Bindings/memory-controllers/nvidia,tegra124-emc.yaml b/dts/Bindings/memory-controllers/nvidia,tegra124-emc.yaml
new file mode 100644
index 0000000000..dd1843489a
--- /dev/null
+++ b/dts/Bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -0,0 +1,528 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra124-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 SoC External Memory Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from the memory controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra124-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: external memory clock
+
+  clock-names:
+    items:
+      - const: emc
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,emc-auto-cal-config:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG register for this set of
+              timings
+
+          nvidia,emc-auto-cal-config2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG2 register for this set of
+              timings
+
+          nvidia,emc-auto-cal-config3:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG3 register for this set of
+              timings
+
+          nvidia,emc-auto-cal-interval:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              pad calibration interval in microseconds
+            minimum: 0
+            maximum: 2097151
+
+          nvidia,emc-bgbias-ctl0:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_BGBIAS_CTL0 register for this set of timings
+
+          nvidia,emc-cfg:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CFG register for this set of timings
+
+          nvidia,emc-cfg-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CFG_2 register for this set of timings
+
+          nvidia,emc-ctt-term-ctrl:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CTT_TERM_CTRL register for this set of timings
+
+          nvidia,emc-mode-1:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW register for this set of timings
+
+          nvidia,emc-mode-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW2 register for this set of timings
+
+          nvidia,emc-mode-4:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW4 register for this set of timings
+
+          nvidia,emc-mode-reset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              reset value of the EMC_MRS register for this set of timings
+
+          nvidia,emc-mrs-wait-cnt:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMR_MRS_WAIT_CNT register for this set of timings
+
+          nvidia,emc-sel-dpd-ctrl:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_SEL_DPD_CTRL register for this set of timings
+
+          nvidia,emc-xm2dqspadctrl2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_XM2DQSPADCTRL2 register for this set of timings
+
+          nvidia,emc-zcal-cnt-long:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              number of EMC clocks to wait before issuing any commands after
+              clock change
+            minimum: 0
+            maximum: 1023
+
+          nvidia,emc-zcal-interval:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_ZCAL_INTERVAL register for this set of timings
+
+          nvidia,emc-configuration:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            description:
+              EMC timing characterization data. These are the registers (see
+              section "15.6.2 EMC Registers" in the TRM) whose values need to
+              be specified, according to the board documentation.
+            items:
+              - description: EMC_RC
+              - description: EMC_RFC
+              - description: EMC_RFC_SLR
+              - description: EMC_RAS
+              - description: EMC_RP
+              - description: EMC_R2W
+              - description: EMC_W2R
+              - description: EMC_R2P
+              - description: EMC_W2P
+              - description: EMC_RD_RCD
+              - description: EMC_WR_RCD
+              - description: EMC_RRD
+              - description: EMC_REXT
+              - description: EMC_WEXT
+              - description: EMC_WDV
+              - description: EMC_WDV_MASK
+              - description: EMC_QUSE
+              - description: EMC_QUSE_WIDTH
+              - description: EMC_IBDLY
+              - description: EMC_EINPUT
+              - description: EMC_EINPUT_DURATION
+              - description: EMC_PUTERM_EXTRA
+              - description: EMC_PUTERM_WIDTH
+              - description: EMC_PUTERM_ADJ
+              - description: EMC_CDB_CNTL_1
+              - description: EMC_CDB_CNTL_2
+              - description: EMC_CDB_CNTL_3
+              - description: EMC_QRST
+              - description: EMC_QSAFE
+              - description: EMC_RDV
+              - description: EMC_RDV_MASK
+              - description: EMC_REFRESH
+              - description: EMC_BURST_REFRESH_NUM
+              - description: EMC_PRE_REFRESH_REQ_CNT
+              - description: EMC_PDEX2WR
+              - description: EMC_PDEX2RD
+              - description: EMC_PCHG2PDEN
+              - description: EMC_ACT2PDEN
+              - description: EMC_AR2PDEN
+              - description: EMC_RW2PDEN
+              - description: EMC_TXSR
+              - description: EMC_TXSRDLL
+              - description: EMC_TCKE
+              - description: EMC_TCKESR
+              - description: EMC_TPD
+              - description: EMC_TFAW
+              - description: EMC_TRPAB
+              - description: EMC_TCLKSTABLE
+              - description: EMC_TCLKSTOP
+              - description: EMC_TREFBW
+              - description: EMC_FBIO_CFG6
+              - description: EMC_ODT_WRITE
+              - description: EMC_ODT_READ
+              - description: EMC_FBIO_CFG5
+              - description: EMC_CFG_DIG_DLL
+              - description: EMC_CFG_DIG_DLL_PERIOD
+              - description: EMC_DLL_XFORM_DQS0
+              - description: EMC_DLL_XFORM_DQS1
+              - description: EMC_DLL_XFORM_DQS2
+              - description: EMC_DLL_XFORM_DQS3
+              - description: EMC_DLL_XFORM_DQS4
+              - description: EMC_DLL_XFORM_DQS5
+              - description: EMC_DLL_XFORM_DQS6
+              - description: EMC_DLL_XFORM_DQS7
+              - description: EMC_DLL_XFORM_DQS8
+              - description: EMC_DLL_XFORM_DQS9
+              - description: EMC_DLL_XFORM_DQS10
+              - description: EMC_DLL_XFORM_DQS11
+              - description: EMC_DLL_XFORM_DQS12
+              - description: EMC_DLL_XFORM_DQS13
+              - description: EMC_DLL_XFORM_DQS14
+              - description: EMC_DLL_XFORM_DQS15
+              - description: EMC_DLL_XFORM_QUSE0
+              - description: EMC_DLL_XFORM_QUSE1
+              - description: EMC_DLL_XFORM_QUSE2
+              - description: EMC_DLL_XFORM_QUSE3
+              - description: EMC_DLL_XFORM_QUSE4
+              - description: EMC_DLL_XFORM_QUSE5
+              - description: EMC_DLL_XFORM_QUSE6
+              - description: EMC_DLL_XFORM_QUSE7
+              - description: EMC_DLL_XFORM_ADDR0
+              - description: EMC_DLL_XFORM_ADDR1
+              - description: EMC_DLL_XFORM_ADDR2
+              - description: EMC_DLL_XFORM_ADDR3
+              - description: EMC_DLL_XFORM_ADDR4
+              - description: EMC_DLL_XFORM_ADDR5
+              - description: EMC_DLL_XFORM_QUSE8
+              - description: EMC_DLL_XFORM_QUSE9
+              - description: EMC_DLL_XFORM_QUSE10
+              - description: EMC_DLL_XFORM_QUSE11
+              - description: EMC_DLL_XFORM_QUSE12
+              - description: EMC_DLL_XFORM_QUSE13
+              - description: EMC_DLL_XFORM_QUSE14
+              - description: EMC_DLL_XFORM_QUSE15
+              - description: EMC_DLI_TRIM_TXDQS0
+              - description: EMC_DLI_TRIM_TXDQS1
+              - description: EMC_DLI_TRIM_TXDQS2
+              - description: EMC_DLI_TRIM_TXDQS3
+              - description: EMC_DLI_TRIM_TXDQS4
+              - description: EMC_DLI_TRIM_TXDQS5
+              - description: EMC_DLI_TRIM_TXDQS6
+              - description: EMC_DLI_TRIM_TXDQS7
+              - description: EMC_DLI_TRIM_TXDQS8
+              - description: EMC_DLI_TRIM_TXDQS9
+              - description: EMC_DLI_TRIM_TXDQS10
+              - description: EMC_DLI_TRIM_TXDQS11
+              - description: EMC_DLI_TRIM_TXDQS12
+              - description: EMC_DLI_TRIM_TXDQS13
+              - description: EMC_DLI_TRIM_TXDQS14
+              - description: EMC_DLI_TRIM_TXDQS15
+              - description: EMC_DLL_XFORM_DQ0
+              - description: EMC_DLL_XFORM_DQ1
+              - description: EMC_DLL_XFORM_DQ2
+              - description: EMC_DLL_XFORM_DQ3
+              - description: EMC_DLL_XFORM_DQ4
+              - description: EMC_DLL_XFORM_DQ5
+              - description: EMC_DLL_XFORM_DQ6
+              - description: EMC_DLL_XFORM_DQ7
+              - description: EMC_XM2CMDPADCTRL
+              - description: EMC_XM2CMDPADCTRL4
+              - description: EMC_XM2CMDPADCTRL5
+              - description: EMC_XM2DQPADCTRL2
+              - description: EMC_XM2DQPADCTRL3
+              - description: EMC_XM2CLKPADCTRL
+              - description: EMC_XM2CLKPADCTRL2
+              - description: EMC_XM2COMPPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL2
+              - description: EMC_XM2VTTGENPADCTRL3
+              - description: EMC_XM2DQSPADCTRL3
+              - description: EMC_XM2DQSPADCTRL4
+              - description: EMC_XM2DQSPADCTRL5
+              - description: EMC_XM2DQSPADCTRL6
+              - description: EMC_DSR_VTTGEN_DRV
+              - description: EMC_TXDSRVTTGEN
+              - description: EMC_FBIO_SPARE
+              - description: EMC_ZCAL_WAIT_CNT
+              - description: EMC_MRS_WAIT_CNT2
+              - description: EMC_CTT
+              - description: EMC_CTT_DURATION
+              - description: EMC_CFG_PIPE
+              - description: EMC_DYN_SELF_REF_CONTROL
+              - description: EMC_QPOP
+
+        required:
+          - clock-frequency
+          - nvidia,emc-auto-cal-config
+          - nvidia,emc-auto-cal-config2
+          - nvidia,emc-auto-cal-config3
+          - nvidia,emc-auto-cal-interval
+          - nvidia,emc-bgbias-ctl0
+          - nvidia,emc-cfg
+          - nvidia,emc-cfg-2
+          - nvidia,emc-ctt-term-ctrl
+          - nvidia,emc-mode-1
+          - nvidia,emc-mode-2
+          - nvidia,emc-mode-4
+          - nvidia,emc-mode-reset
+          - nvidia,emc-mrs-wait-cnt
+          - nvidia,emc-sel-dpd-ctrl
+          - nvidia,emc-xm2dqspadctrl2
+          - nvidia,emc-zcal-cnt-long
+          - nvidia,emc-zcal-interval
+          - nvidia,emc-configuration
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mc: memory-controller@70019000 {
+        compatible = "nvidia,tegra124-mc";
+        reg = <0x0 0x70019000 0x0 0x1000>;
+        clocks = <&tegra_car TEGRA124_CLK_MC>;
+        clock-names = "mc";
+
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+        #iommu-cells = <1>;
+    };
+
+    external-memory-controller@7001b000 {
+        compatible = "nvidia,tegra124-emc";
+        reg = <0x0 0x7001b000 0x0 0x1000>;
+        clocks = <&car TEGRA124_CLK_EMC>;
+        clock-names = "emc";
+
+        nvidia,memory-controller = <&mc>;
+
+        emc-timings-0 {
+            nvidia,ram-code = <3>;
+
+            timing-0 {
+                clock-frequency = <12750000>;
+
+                nvidia,emc-zcal-cnt-long = <0x00000042>;
+                nvidia,emc-auto-cal-interval = <0x001fffff>;
+                nvidia,emc-ctt-term-ctrl = <0x00000802>;
+                nvidia,emc-cfg = <0x73240000>;
+                nvidia,emc-cfg-2 = <0x000008c5>;
+                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+                nvidia,emc-bgbias-ctl0 = <0x00000008>;
+                nvidia,emc-auto-cal-config = <0xa1430000>;
+                nvidia,emc-auto-cal-config2 = <0x00000000>;
+                nvidia,emc-auto-cal-config3 = <0x00000000>;
+                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-mode-1 = <0x80100003>;
+                nvidia,emc-mode-2 = <0x80200008>;
+                nvidia,emc-mode-4 = <0x00000000>;
+
+                nvidia,emc-configuration = <
+                    0x00000000 /* EMC_RC */
+                    0x00000003 /* EMC_RFC */
+                    0x00000000 /* EMC_RFC_SLR */
+                    0x00000000 /* EMC_RAS */
+                    0x00000000 /* EMC_RP */
+                    0x00000004 /* EMC_R2W */
+                    0x0000000a /* EMC_W2R */
+                    0x00000003 /* EMC_R2P */
+                    0x0000000b /* EMC_W2P */
+                    0x00000000 /* EMC_RD_RCD */
+                    0x00000000 /* EMC_WR_RCD */
+                    0x00000003 /* EMC_RRD */
+                    0x00000003 /* EMC_REXT */
+                    0x00000000 /* EMC_WEXT */
+                    0x00000006 /* EMC_WDV */
+                    0x00000006 /* EMC_WDV_MASK */
+                    0x00000006 /* EMC_QUSE */
+                    0x00000002 /* EMC_QUSE_WIDTH */
+                    0x00000000 /* EMC_IBDLY */
+                    0x00000005 /* EMC_EINPUT */
+                    0x00000005 /* EMC_EINPUT_DURATION */
+                    0x00010000 /* EMC_PUTERM_EXTRA */
+                    0x00000003 /* EMC_PUTERM_WIDTH */
+                    0x00000000 /* EMC_PUTERM_ADJ */
+                    0x00000000 /* EMC_CDB_CNTL_1 */
+                    0x00000000 /* EMC_CDB_CNTL_2 */
+                    0x00000000 /* EMC_CDB_CNTL_3 */
+                    0x00000004 /* EMC_QRST */
+                    0x0000000c /* EMC_QSAFE */
+                    0x0000000d /* EMC_RDV */
+                    0x0000000f /* EMC_RDV_MASK */
+                    0x00000060 /* EMC_REFRESH */
+                    0x00000000 /* EMC_BURST_REFRESH_NUM */
+                    0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+                    0x00000002 /* EMC_PDEX2WR */
+                    0x00000002 /* EMC_PDEX2RD */
+                    0x00000001 /* EMC_PCHG2PDEN */
+                    0x00000000 /* EMC_ACT2PDEN */
+                    0x00000007 /* EMC_AR2PDEN */
+                    0x0000000f /* EMC_RW2PDEN */
+                    0x00000005 /* EMC_TXSR */
+                    0x00000005 /* EMC_TXSRDLL */
+                    0x00000004 /* EMC_TCKE */
+                    0x00000005 /* EMC_TCKESR */
+                    0x00000004 /* EMC_TPD */
+                    0x00000000 /* EMC_TFAW */
+                    0x00000000 /* EMC_TRPAB */
+                    0x00000005 /* EMC_TCLKSTABLE */
+                    0x00000005 /* EMC_TCLKSTOP */
+                    0x00000064 /* EMC_TREFBW */
+                    0x00000000 /* EMC_FBIO_CFG6 */
+                    0x00000000 /* EMC_ODT_WRITE */
+                    0x00000000 /* EMC_ODT_READ */
+                    0x106aa298 /* EMC_FBIO_CFG5 */
+                    0x002c00a0 /* EMC_CFG_DIG_DLL */
+                    0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+                    0x00064000 /* EMC_DLL_XFORM_DQS0 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS1 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS2 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS3 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS4 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS5 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS6 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS7 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS8 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS9 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS10 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS11 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS12 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS13 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS14 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS15 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+                    0x10000280 /* EMC_XM2CMDPADCTRL */
+                    0x00000000 /* EMC_XM2CMDPADCTRL4 */
+                    0x00111111 /* EMC_XM2CMDPADCTRL5 */
+                    0x00000000 /* EMC_XM2DQPADCTRL2 */
+                    0x00000000 /* EMC_XM2DQPADCTRL3 */
+                    0x77ffc081 /* EMC_XM2CLKPADCTRL */
+                    0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+                    0x81f1f108 /* EMC_XM2COMPPADCTRL */
+                    0x07070004 /* EMC_XM2VTTGENPADCTRL */
+                    0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+                    0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+                    0x51451400 /* EMC_XM2DQSPADCTRL3 */
+                    0x00514514 /* EMC_XM2DQSPADCTRL4 */
+                    0x00514514 /* EMC_XM2DQSPADCTRL5 */
+                    0x51451400 /* EMC_XM2DQSPADCTRL6 */
+                    0x0000003f /* EMC_DSR_VTTGEN_DRV */
+                    0x00000007 /* EMC_TXDSRVTTGEN */
+                    0x00000000 /* EMC_FBIO_SPARE */
+                    0x00000042 /* EMC_ZCAL_WAIT_CNT */
+                    0x000e000e /* EMC_MRS_WAIT_CNT2 */
+                    0x00000000 /* EMC_CTT */
+                    0x00000003 /* EMC_CTT_DURATION */
+                    0x0000f2f3 /* EMC_CFG_PIPE */
+                    0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+                    0x0000000a /* EMC_QPOP */
+                >;
+            };
+        };
+    };
diff --git a/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
new file mode 100644
index 0000000000..12516bd89c
--- /dev/null
+++ b/dts/Bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) SoC Memory Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The NVIDIA Tegra186 SoC features a 128 bit memory controller that is split
+  into four 32 bit channels to support LPDDR4 with x16 subpartitions. The MC
+  handles memory requests for 40-bit virtual addresses from internal clients
+  and arbitrates among them to allocate memory bandwidth.
+
+  Up to 15 GiB of physical memory can be supported. Security features such as
+  encryption of traffic to and from DRAM via general security apertures are
+  available for video and other secure applications, as well as DRAM ECC for
+  automotive safety applications (single bit error correction and double bit
+  error detection).
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra186-mc
+          - nvidia,tegra194-mc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  dma-ranges: true
+
+patternProperties:
+  "^external-memory-controller@[0-9a-f]+$":
+    description:
+      The bulk of the work involved in controlling the external memory
+      controller on NVIDIA Tegra186 and later is performed on the BPMP. This
+      coprocessor exposes the EMC clock that is used to set the frequency at
+      which the external memory is clocked and a remote procedure call that
+      can be used to obtain the set of available frequencies.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nvidia,tegra186-emc
+              - nvidia,tegra194-emc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: external memory clock
+
+      clock-names:
+        items:
+          - const: emc
+
+      nvidia,bpmp:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          phandle of the node representing the BPMP
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@2c00000 {
+        compatible = "nvidia,tegra186-mc";
+        reg = <0x0 0x02c00000 0x0 0xb0000>;
+        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+
+        /*
+         * Memory clients have access to all 40 bits that the memory
+         * controller can address.
+         */
+        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+        external-memory-controller@2c60000 {
+            compatible = "nvidia,tegra186-emc";
+            reg = <0x0 0x02c60000 0x0 0x50000>;
+            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_EMC>;
+            clock-names = "emc";
+
+            nvidia,bpmp = <&bpmp>;
+        };
+    };
+
+    bpmp: bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        #clock-cells = <1>;
+    };
diff --git a/dts/Bindings/mfd/ab8500.txt b/dts/Bindings/mfd/ab8500.txt
index b6bc30d777..5c6eabeed3 100644
--- a/dts/Bindings/mfd/ab8500.txt
+++ b/dts/Bindings/mfd/ab8500.txt
@@ -1,7 +1,7 @@
 * AB8500 Multi-Functional Device (MFD)
 
 Required parent device properties:
-- compatible             : contains "stericsson,ab8500";
+- compatible             : contains "stericsson,ab8500" or "stericsson,ab8505";
 - interrupts             : contains the IRQ line for the AB8500
 - interrupt-controller   : describes the AB8500 as an Interrupt Controller (has its own domain)
 - #interrupt-cells       : should be 2, for 2-cell format
@@ -49,11 +49,13 @@ ab8500-charger		 :			: vddadc       : Charger interface
 			 : CH_WD_EXP		:	       : Charger watchdog detected
 ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
                            SW_CONV_END          :              :
-ab8500-gpio              :                      :              : GPIO Controller
+ab8500-gpio              :                      :              : GPIO Controller (AB8500)
+ab8505-gpio              :                      :              : GPIO Controller (AB8505)
 ab8500-ponkey            : ONKEY_DBF            :              : Power-on Key
                            ONKEY_DBR            :              :
 ab8500-pwm               :                      :              : Pulse Width Modulator
-ab8500-regulator         :                      :              : Regulators
+ab8500-regulator         :                      :              : Regulators (AB8500)
+ab8505-regulator         :                      :              : Regulators (AB8505)
 ab8500-rtc               : 60S                  :              : Real Time Clock
                          : ALARM                :              :
 ab8500-sysctrl           :                      :              : System Control
diff --git a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
new file mode 100644
index 0000000000..d131759cca
--- /dev/null
+++ b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 PRCM Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  compatible:
+    const: allwinner,sun6i-a31-prcm
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^.*_(clk|rst)$":
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - allwinner,sun4i-a10-mod0-clk
+          - allwinner,sun6i-a31-apb0-clk
+          - allwinner,sun6i-a31-apb0-gates-clk
+          - allwinner,sun6i-a31-ar100-clk
+          - allwinner,sun6i-a31-clock-reset
+          - fixed-factor-clock
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-apb0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-apb0-gates-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 1
+              description: >
+                This additional argument passed to that clock is the
+                offset of the bit controlling this particular gate in
+                the register.
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              minItems: 1
+              maxItems: 32
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-ar100-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 4
+              description: >
+                The parent order must match the hardware programming
+                order.
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-clock-reset
+
+        then:
+          properties:
+            "#reset-cells":
+              const: 1
+
+            # Already checked in the main schema
+            compatible: true
+
+            phandle: true
+
+          required:
+            - "#reset-cells"
+            - compatible
+
+          additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+
+    prcm@1f01400 {
+        compatible = "allwinner,sun6i-a31-prcm";
+        reg = <0x01f01400 0x200>;
+
+        ar100: ar100_clk {
+            compatible = "allwinner,sun6i-a31-ar100-clk";
+            #clock-cells = <0>;
+            clocks = <&rtc 0>, <&osc24M>,
+                     <&ccu CLK_PLL_PERIPH>,
+                     <&ccu CLK_PLL_PERIPH>;
+            clock-output-names = "ar100";
+        };
+
+        ahb0: ahb0_clk {
+            compatible = "fixed-factor-clock";
+            #clock-cells = <0>;
+            clock-div = <1>;
+            clock-mult = <1>;
+            clocks = <&ar100>;
+            clock-output-names = "ahb0";
+        };
+
+        apb0: apb0_clk {
+            compatible = "allwinner,sun6i-a31-apb0-clk";
+            #clock-cells = <0>;
+            clocks = <&ahb0>;
+            clock-output-names = "apb0";
+        };
+
+        apb0_gates: apb0_gates_clk {
+            compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+            #clock-cells = <1>;
+            clocks = <&apb0>;
+            clock-output-names = "apb0_pio", "apb0_ir",
+                                 "apb0_timer", "apb0_p2wi",
+                                 "apb0_uart", "apb0_1wire",
+                                 "apb0_i2c";
+        };
+
+        ir_clk: ir_clk {
+            #clock-cells = <0>;
+            compatible = "allwinner,sun4i-a10-mod0-clk";
+            clocks = <&rtc 0>, <&osc24M>;
+            clock-output-names = "ir";
+        };
+
+        apb0_rst: apb0_rst {
+            compatible = "allwinner,sun6i-a31-clock-reset";
+            #reset-cells = <1>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml
new file mode 100644
index 0000000000..aa5e683b23
--- /dev/null
+++ b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 PRCM Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a23-prcm
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^.*(clk|rst|codec).*$":
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - fixed-factor-clock
+          - allwinner,sun8i-a23-apb0-clk
+          - allwinner,sun8i-a23-apb0-gates-clk
+          - allwinner,sun6i-a31-clock-reset
+          - allwinner,sun8i-a23-codec-analog
+
+    required:
+      - compatible
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun8i-a23-apb0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun8i-a23-apb0-gates-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 1
+              description: >
+                This additional argument passed to that clock is the
+                offset of the bit controlling this particular gate in
+                the register.
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 1
+
+            clock-output-names:
+              minItems: 1
+              maxItems: 32
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-clock-reset
+
+        then:
+          properties:
+            "#reset-cells":
+              const: 1
+
+            # Already checked in the main schema
+            compatible: true
+
+            phandle: true
+
+          required:
+            - "#reset-cells"
+            - compatible
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun8i-a23-codec-analog
+
+        then:
+          properties:
+            # Already checked in the main schema
+            compatible: true
+
+            phandle: true
+
+          required:
+            - compatible
+
+          additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    prcm@1f01400 {
+        compatible = "allwinner,sun8i-a23-prcm";
+        reg = <0x01f01400 0x200>;
+
+        ar100: ar100_clk {
+            compatible = "fixed-factor-clock";
+            #clock-cells = <0>;
+            clock-div = <1>;
+            clock-mult = <1>;
+            clocks = <&osc24M>;
+            clock-output-names = "ar100";
+        };
+
+        ahb0: ahb0_clk {
+            compatible = "fixed-factor-clock";
+            #clock-cells = <0>;
+            clock-div = <1>;
+            clock-mult = <1>;
+            clocks = <&ar100>;
+            clock-output-names = "ahb0";
+        };
+
+        apb0: apb0_clk {
+            compatible = "allwinner,sun8i-a23-apb0-clk";
+            #clock-cells = <0>;
+            clocks = <&ahb0>;
+            clock-output-names = "apb0";
+        };
+
+        apb0_gates: apb0_gates_clk {
+            compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+            #clock-cells = <1>;
+            clocks = <&apb0>;
+            clock-output-names = "apb0_pio", "apb0_timer",
+                                 "apb0_rsb", "apb0_uart",
+                                 "apb0_i2c";
+        };
+
+        apb0_rst: apb0_rst {
+            compatible = "allwinner,sun6i-a31-clock-reset";
+            #reset-cells = <1>;
+        };
+
+        codec_analog: codec-analog {
+            compatible = "allwinner,sun8i-a23-codec-analog";
+        };
+    };
+
+...
diff --git a/dts/Bindings/mfd/atmel-gpbr.txt b/dts/Bindings/mfd/atmel-gpbr.txt
index a285695406..e8c525569f 100644
--- a/dts/Bindings/mfd/atmel-gpbr.txt
+++ b/dts/Bindings/mfd/atmel-gpbr.txt
@@ -3,7 +3,9 @@
 The GPBR are a set of battery-backed registers.
 
 Required properties:
-- compatible:		"atmel,at91sam9260-gpbr", "syscon"
+- compatible:		Should be one of the following:
+			"atmel,at91sam9260-gpbr", "syscon"
+			"microchip,sam9x60-gpbr", "syscon"
 - reg:			contains offset/length value of the GPBR memory
 			region.
 
diff --git a/dts/Bindings/mfd/atmel-matrix.txt b/dts/Bindings/mfd/atmel-matrix.txt
index e3ef50ca02..89d05c64fb 100644
--- a/dts/Bindings/mfd/atmel-matrix.txt
+++ b/dts/Bindings/mfd/atmel-matrix.txt
@@ -13,6 +13,7 @@ Required properties:
 			"atmel,at91sam9n12-matrix", "syscon"
 			"atmel,at91sam9x5-matrix", "syscon"
 			"atmel,sama5d3-matrix", "syscon"
+			"microchip,sam9x60-matrix", "syscon"
 - reg:			Contains offset/length value of the Bus Matrix
 			memory region.
 
diff --git a/dts/Bindings/mfd/atmel-smc.txt b/dts/Bindings/mfd/atmel-smc.txt
index 1103ce2030..5696d9fcb5 100644
--- a/dts/Bindings/mfd/atmel-smc.txt
+++ b/dts/Bindings/mfd/atmel-smc.txt
@@ -9,6 +9,7 @@ Required properties:
 			"atmel,at91sam9260-smc", "syscon"
 			"atmel,sama5d3-smc", "syscon"
 			"atmel,sama5d2-smc", "syscon"
+			"microchip,sam9x60-smc", "syscon"
 - reg:			Contains offset/length value of the SMC memory
 			region.
 
diff --git a/dts/Bindings/mfd/atmel-usart.txt b/dts/Bindings/mfd/atmel-usart.txt
index 699fd3c9ac..a09133066a 100644
--- a/dts/Bindings/mfd/atmel-usart.txt
+++ b/dts/Bindings/mfd/atmel-usart.txt
@@ -1,10 +1,13 @@
 * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
 Required properties for USART:
-- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
-  The compatible <chip> indicated will be the first SoC to support an
-  additional mode or an USART new feature.
-  For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
+- compatible: Should be one of the following:
+	- "atmel,at91rm9200-usart"
+	- "atmel,at91sam9260-usart"
+	- "microchip,sam9x60-usart"
+	- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
+	- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
+	- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt
 - clock-names: tuple listing input clock names.
diff --git a/dts/Bindings/mfd/da9062.txt b/dts/Bindings/mfd/da9062.txt
index bc4b59de6a..857af982c8 100644
--- a/dts/Bindings/mfd/da9062.txt
+++ b/dts/Bindings/mfd/da9062.txt
@@ -13,6 +13,7 @@ da9062-rtc              :               : Real-Time Clock
 da9062-onkey            :               : On Key
 da9062-watchdog         :               : Watchdog Timer
 da9062-thermal          :               : Thermal
+da9062-gpio             :               : GPIOs
 
 The DA9061 PMIC consists of:
 
@@ -38,6 +39,15 @@ Required properties:
 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
 further information on IRQ bindings.
 
+Optional properties:
+
+- gpio-controller : Marks the device as a gpio controller.
+- #gpio-cells     : Should be two. The first cell is the pin number and the
+                    second cell is used to specify the gpio polarity.
+
+See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
+GPIO bindings.
+
 Sub-nodes:
 
 - regulators : This node defines the settings for the LDOs and BUCKs.
diff --git a/dts/Bindings/mfd/max14577.txt b/dts/Bindings/mfd/max14577.txt
index fc6f0f4e8b..92070b3467 100644
--- a/dts/Bindings/mfd/max14577.txt
+++ b/dts/Bindings/mfd/max14577.txt
@@ -5,6 +5,8 @@ Battery Charger and SFOUT LDO output for powering USB devices. It is
 interfaced to host controller using I2C.
 
 MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+For the description of Fuel Gauge low SOC alert interrupt see:
+../power/supply/max17040_battery.txt
 
 
 Required properties:
diff --git a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml
new file mode 100644
index 0000000000..4fbb9e7342
--- /dev/null
+++ b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit bindings
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  BD71828GW is a single-chip power management IC for battery-powered portable
+  devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
+  single-cell linear charger. Also included is a Coulomb counter, a real-time
+  clock (RTC), and a 32.768 kHz clock gate.
+
+properties:
+  compatible:
+    const: rohm,bd71828
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags. See ../gpio/gpio.txt for more information.
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  rohm,charger-sense-resistor-ohms:
+    minimum: 10000000
+    maximum: 50000000
+    description: |
+      BD71827 and BD71828 have SAR ADC for measuring charging currents.
+      External sense resistor (RSENSE in data sheet) should be used. If some
+      other but 30MOhm resistor is used the resistance value should be given
+      here in Ohms.
+
+  regulators:
+    $ref: ../regulator/rohm,bd71828-regulator.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  leds:
+    $ref: ../leds/rohm,bd71828-leds.yaml
+
+  gpio-reserved-ranges:
+    description: |
+      Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+      used to mark the pins which should not be configured for GPIO. Please see
+      the ../gpio/gpio.txt for more information.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#clock-cells"
+  - regulators
+  - gpio-controller
+  - "#gpio-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
+            compatible = "rohm,bd71828";
+            reg = <0x4b>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            clocks = <&osc 0>;
+            #clock-cells = <0>;
+            clock-output-names = "bd71828-32k-out";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-reserved-ranges = <0 1>, <2 1>;
+
+            rohm,charger-sense-resistor-ohms = <10000000>;
+
+            regulators {
+                buck1: BUCK1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck2: BUCK2 {
+                    regulator-name = "buck2";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck3: BUCK3 {
+                    regulator-name = "buck3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <2000000>;
+                };
+                buck4: BUCK4 {
+                    regulator-name = "buck4";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                buck5: BUCK5 {
+                    regulator-name = "buck5";
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                buck6: BUCK6 {
+                    regulator-name = "buck6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                buck7: BUCK7 {
+                    regulator-name = "buck7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2000000>;
+                    regulator-ramp-delay = <2500>;
+                };
+                ldo1: LDO1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo2: LDO2 {
+                    regulator-name = "ldo2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo3: LDO3 {
+                    regulator-name = "ldo3";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo4: LDO4 {
+                    regulator-name = "ldo4";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo5: LDO5 {
+                    regulator-name = "ldo5";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+                ldo6: LDO6 {
+                    regulator-name = "ldo6";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                };
+                ldo7_reg: LDO7 {
+                    regulator-name = "ldo7";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+
+            leds {
+                compatible = "rohm,bd71828-leds";
+
+                led-1 {
+                    rohm,led-compatible = "bd71828-grnled";
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+                led-2 {
+                    rohm,led-compatible = "bd71828-ambled";
+                    function = LED_FUNCTION_CHARGING;
+                    color = <LED_COLOR_ID_AMBER>;
+                };
+            };
+        };
+    };
diff --git a/dts/Bindings/mfd/sun6i-prcm.txt b/dts/Bindings/mfd/sun6i-prcm.txt
deleted file mode 100644
index daa091c2e6..0000000000
--- a/dts/Bindings/mfd/sun6i-prcm.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device
-
-PRCM is an MFD device exposing several Power Management related devices
-(like clks and reset controllers).
-
-Required properties:
- - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm"
- - reg: The PRCM registers range
-
-The prcm node may contain several subdevices definitions:
- - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices
- - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
-   controller devices
-
-
-Example:
-
-	prcm: prcm@1f01400 {
-		compatible = "allwinner,sun6i-a31-prcm";
-		reg = <0x01f01400 0x200>;
-
-		/* Put subdevices here */
-		ar100: ar100_clk {
-			compatible = "allwinner,sun6i-a31-ar100-clk";
-			#clock-cells = <0>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-		};
-
-		ahb0: ahb0_clk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&ar100_div>;
-			clock-output-names = "ahb0";
-		};
-
-		apb0: apb0_clk {
-			compatible = "allwinner,sun6i-a31-apb0-clk";
-			#clock-cells = <0>;
-			clocks = <&ahb0>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: apb0_gates_clk {
-			compatible = "allwinner,sun6i-a31-apb0-gates-clk";
-			#clock-cells = <1>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_pio", "apb0_ir",
-					"apb0_timer01", "apb0_p2wi",
-					"apb0_uart", "apb0_1wire",
-					"apb0_i2c";
-		};
-
-		apb0_rst: apb0_rst {
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			#reset-cells = <1>;
-		};
-	};
diff --git a/dts/Bindings/mfd/tps6105x.txt b/dts/Bindings/mfd/tps6105x.txt
index 93602c7a19..dc448a9d5b 100644
--- a/dts/Bindings/mfd/tps6105x.txt
+++ b/dts/Bindings/mfd/tps6105x.txt
@@ -7,11 +7,56 @@ Required properties:
 - compatible:		"ti,tps61050" or "ti,tps61052"
 - reg:			Specifies the I2C slave address
 
-Example:
+Optional sub-node:
+
+This subnode selects the chip's operational mode.
+There can be at most one single available subnode.
+
+- regulator: presence of this sub-node puts the chip in regulator mode.
+	see ../regulator/regulator.yaml
+
+- led: presence of this sub-node puts the chip in led mode.
+	Optional properties:
+	- function : see ../leds/common.txt
+	- color    : see ../leds/common.txt
+	- label    : see ../leds/common.txt
+			(deprecated)
+
+Example (GPIO operation only):
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+	};
+};
+
+Example (GPIO + regulator operation):
 
 i2c0 {
 	tps61052@33 {
 		compatible = "ti,tps61052";
 		reg = <0x33>;
+
+		regulator {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+Example (GPIO + led operation):
+
+#include <dt-bindings/leds/common.h>
+
+i2c0 {
+	tps61052@33 {
+		compatible = "ti,tps61052";
+		reg = <0x33>;
+
+		led {
+			color = <LED_COLOR_ID_WHITE>;
+		};
 	};
 };
diff --git a/dts/Bindings/mfd/xylon,logicvc.yaml b/dts/Bindings/mfd/xylon,logicvc.yaml
new file mode 100644
index 0000000000..abc9937506
--- /dev/null
+++ b/dts/Bindings/mfd/xylon,logicvc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xylon LogiCVC multi-function device
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The LogiCVC is a display controller that also contains a GPIO controller.
+  As a result, a multi-function device is exposed as parent of the display
+  and GPIO blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xylon,logicvc-3.02.a
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - xylon,logicvc-3.02.a
+
+  required:
+    - compatible
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+    };
diff --git a/dts/Bindings/mips/ingenic/devices.yaml b/dts/Bindings/mips/ingenic/devices.yaml
new file mode 100644
index 0000000000..78dcf6ef38
--- /dev/null
+++ b/dts/Bindings/mips/ingenic/devices.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ingenic/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic XBurst based Platforms Device Tree Bindings
+
+maintainers:
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+description: |
+  Devices with a Ingenic XBurst CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Qi Hardware Ben NanoNote
+        items:
+          - const: qi,lb60
+
+      - description: Game Consoles Worldwide GCW Zero
+        items:
+          - const: gcw,zero
+
+      - description: MIPS Creator CI20
+        items:
+          - const: img,ci20
+
+      - description: YSH & ATIL General Board CU Neo
+        items:
+          - const: yna,cu1000-neo
+...
diff --git a/dts/Bindings/misc/aspeed-p2a-ctrl.txt b/dts/Bindings/misc/aspeed-p2a-ctrl.txt
index 0e1fa5bc6a..f2e2e28b31 100644
--- a/dts/Bindings/misc/aspeed-p2a-ctrl.txt
+++ b/dts/Bindings/misc/aspeed-p2a-ctrl.txt
@@ -18,6 +18,7 @@ Required properties:
 Optional properties:
 ===================
 
+- reg: A hint for the memory regions associated with the P2A controller
 - memory-region: A phandle to a reserved_memory region to be used for the PCI
 		to AHB mapping
 
diff --git a/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt b/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt
index 733b64a4d8..ae20741845 100644
--- a/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt
+++ b/dts/Bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -11,28 +11,43 @@ Required properties:
 - compatible: should be one of the following
   - "brcm,bcm7425-sdhci"
   - "brcm,bcm7445-sdhci"
+  - "brcm,bcm7216-sdhci"
 
 Refer to clocks/clock-bindings.txt for generic clock consumer properties.
 
 Example:
 
-	sdhci@f03e0100 {
-		compatible = "brcm,bcm7425-sdhci";
-		reg = <0xf03e0000 0x100>;
-		interrupts = <0x0 0x26 0x0>;
-		sdhci,auto-cmd12;
-		clocks = <&sw_sdio>;
+	sdhci@84b0000 {
 		sd-uhs-sdr50;
 		sd-uhs-ddr50;
+		sd-uhs-sdr104;
+		sdhci,auto-cmd12;
+		compatible = "brcm,bcm7216-sdhci",
+			   "brcm,bcm7445-sdhci",
+			   "brcm,sdhci-brcmstb";
+		reg = <0x84b0000 0x260 0x84b0300 0x200>;
+		reg-names = "host", "cfg";
+		interrupts = <0x0 0x26 0x4>;
+		interrupt-names = "sdio0_0";
+		clocks = <&scmi_clk 245>;
+		clock-names = "sw_sdio";
 	};
 
-	sdhci@f03e0300 {
+	sdhci@84b1000 {
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		mmc-hs400-enhanced-strobe;
+		supports-cqe;
 		non-removable;
 		bus-width = <0x8>;
-		compatible = "brcm,bcm7425-sdhci";
-		reg = <0xf03e0200 0x100>;
-		interrupts = <0x0 0x27 0x0>;
-		sdhci,auto-cmd12;
-		clocks = <sw_sdio>;
-		mmc-hs200-1_8v;
+		compatible = "brcm,bcm7216-sdhci",
+			   "brcm,bcm7445-sdhci",
+			   "brcm,sdhci-brcmstb";
+		reg = <0x84b1000 0x260 0x84b1300 0x200>;
+		reg-names = "host", "cfg";
+		interrupts = <0x0 0x27 0x4>;
+		interrupt-names = "sdio1_0";
+		clocks = <&scmi_clk 245>;
+		clock-names = "sw_sdio";
 	};
diff --git a/dts/Bindings/mmc/fsl-imx-esdhc.txt b/dts/Bindings/mmc/fsl-imx-esdhc.txt
index 2fb466ca2a..0f97d71144 100644
--- a/dts/Bindings/mmc/fsl-imx-esdhc.txt
+++ b/dts/Bindings/mmc/fsl-imx-esdhc.txt
@@ -21,6 +21,8 @@ Required properties:
 	       "fsl,imx8mq-usdhc"
 	       "fsl,imx8mm-usdhc"
 	       "fsl,imx8mn-usdhc"
+	       "fsl,imx8mp-usdhc"
+	       "fsl,imx8qm-usdhc"
 	       "fsl,imx8qxp-usdhc"
 
 Optional properties:
diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml
index b130450c3b..3c0df4016a 100644
--- a/dts/Bindings/mmc/mmc-controller.yaml
+++ b/dts/Bindings/mmc/mmc-controller.yaml
@@ -96,11 +96,10 @@ properties:
     description:
       When set, no physical write-protect line is present. This
       property should only be specified when the controller has a
-      dedicated write-protect detection logic. If a GPIO is always
-      used for the write-protect detection. If a GPIO is always used
+      dedicated write-protect detection logic. If a GPIO is always used
       for the write-protect detection logic, it is sufficient to not
       specify the wp-gpios property in the absence of a write-protect
-      line.
+      line. Not used in combination with eMMC or SDIO.
 
   wp-gpios:
     description:
diff --git a/dts/Bindings/mmc/renesas,sdhi.txt b/dts/Bindings/mmc/renesas,sdhi.txt
index bc08fc43a9..e6cc478442 100644
--- a/dts/Bindings/mmc/renesas,sdhi.txt
+++ b/dts/Bindings/mmc/renesas,sdhi.txt
@@ -23,7 +23,8 @@ Required properties:
 		"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
 		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 		"renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC
-		"renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC
+		"renesas,sdhi-r8a7796" - SDHI IP on R8A77960 SoC
+		"renesas,sdhi-r8a77961" - SDHI IP on R8A77961 SoC
 		"renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC
 		"renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC
 		"renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC
diff --git a/dts/Bindings/mmc/rockchip-dw-mshc.txt b/dts/Bindings/mmc/rockchip-dw-mshc.txt
deleted file mode 100644
index 6f629b12bd..0000000000
--- a/dts/Bindings/mmc/rockchip-dw-mshc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Rockchip specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Rockchip specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
-							before RK3288
-	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
-	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
-	- "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip PX30
-	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
-	- "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x
-	- "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328
-	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
-	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
-
-Optional Properties:
-* clocks: from common clock binding: if ciu-drive and ciu-sample are
-  specified in clock-names, should contain handles to these clocks.
-
-* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt
-  two more clocks "ciu-drive" and "ciu-sample" are supported. They are used
-  to control the clock phases, "ciu-sample" is required for tuning high-
-  speed modes.
-
-* rockchip,default-sample-phase: The default phase to set ciu-sample at
-  probing, low speeds or in case where all phases work at tuning time.
-  If not specified 0 deg will be used.
-
-* rockchip,desired-num-phases: The desired number of times that the host
-  execute tuning when needed. If not specified, the host will do tuning
-  for 360 times, namely tuning for each degree.
-
-Example:
-
-	rkdwmmc0@12200000 {
-		compatible = "rockchip,rk3288-dw-mshc";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/dts/Bindings/mmc/rockchip-dw-mshc.yaml b/dts/Bindings/mmc/rockchip-dw-mshc.yaml
new file mode 100644
index 0000000000..89c3edd6a7
--- /dev/null
+++ b/dts/Bindings/mmc/rockchip-dw-mshc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip designware mobile storage host controller device tree bindings
+
+description:
+  Rockchip uses the Synopsys designware mobile storage host controller
+  to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+  This file documents the combined properties for the core Synopsys dw mshc
+  controller that are not already included in the synopsys-dw-mshc-common.yaml
+  file and the Rockchip specific extensions.
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    oneOf:
+      # for Rockchip RK2928 and before RK3288
+      - const: rockchip,rk2928-dw-mshc
+      # for Rockchip RK3288
+      - const: rockchip,rk3288-dw-mshc
+      - items:
+          - enum:
+            # for Rockchip PX30
+            - rockchip,px30-dw-mshc
+            # for Rockchip RK3036
+            - rockchip,rk3036-dw-mshc
+            # for Rockchip RK322x
+            - rockchip,rk3228-dw-mshc
+            # for Rockchip RK3308
+            - rockchip,rk3308-dw-mshc
+            # for Rockchip RK3328
+            - rockchip,rk3328-dw-mshc
+            # for Rockchip RK3368
+            - rockchip,rk3368-dw-mshc
+            # for Rockchip RK3399
+            - rockchip,rk3399-dw-mshc
+            # for Rockchip RV1108
+            - rockchip,rv1108-dw-mshc
+          - const: rockchip,rk3288-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+    description:
+      Handle to "biu" and "ciu" clocks for the bus interface unit clock and
+      the card interface unit clock. If "ciu-drive" and "ciu-sample" are
+      specified in clock-names, it should also contain
+      handles to these clocks.
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: biu
+      - const: ciu
+      - const: ciu-drive
+      - const: ciu-sample
+    description:
+      Apart from the clock-names "biu" and "ciu" two more clocks
+      "ciu-drive" and "ciu-sample" are supported. They are used
+      to control the clock phases, "ciu-sample" is required for tuning
+      high speed modes.
+
+  rockchip,default-sample-phase:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 360
+    default: 0
+    description:
+      The default phase to set "ciu-sample" at probing,
+      low speeds or in case where all phases work at tuning time.
+      If not specified 0 deg will be used.
+
+  rockchip,desired-num-phases:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 360
+    default: 360
+    description:
+      The desired number of times that the host execute tuning when needed.
+      If not specified, the host will do tuning for 360 times,
+      namely tuning for each degree.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    sdmmc: mmc@ff0c0000 {
+      compatible = "rockchip,rk3288-dw-mshc";
+      reg = <0x0 0xff0c0000 0x0 0x4000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+               <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+      clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+      resets = <&cru SRST_MMC0>;
+      reset-names = "reset";
+      fifo-depth = <0x100>;
+      max-frequency = <150000000>;
+    };
+
+...
diff --git a/dts/Bindings/mmc/sdhci-atmel.txt b/dts/Bindings/mmc/sdhci-atmel.txt
index 503c6dbac1..69edfd4d39 100644
--- a/dts/Bindings/mmc/sdhci-atmel.txt
+++ b/dts/Bindings/mmc/sdhci-atmel.txt
@@ -5,11 +5,16 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the
 sdhci-of-at91 driver.
 
 Required properties:
-- compatible:		Must be "atmel,sama5d2-sdhci".
+- compatible:		Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci".
 - clocks:		Phandlers to the clocks.
-- clock-names:		Must be "hclock", "multclk", "baseclk";
+- clock-names:		Must be "hclock", "multclk", "baseclk" for
+			"atmel,sama5d2-sdhci".
+			Must be "hclock", "multclk" for "microchip,sam9x60-sdhci".
 
 Optional properties:
+- assigned-clocks:	The same with "multclk".
+- assigned-clock-rates	The rate of "multclk" in order to not rely on the
+			gck configuration set by previous components.
 - microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is
   inverted. The default polarity for this signal is described in the datasheet.
   For instance on SAMA5D2, the pin is usually tied to the GND with a resistor
@@ -17,10 +22,12 @@ Optional properties:
 
 Example:
 
-sdmmc0: sdio-host@a0000000 {
+mmc0: sdio-host@a0000000 {
 	compatible = "atmel,sama5d2-sdhci";
 	reg = <0xa0000000 0x300>;
 	interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 	clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
 	clock-names = "hclock", "multclk", "baseclk";
+	assigned-clocks = <&sdmmc0_gclk>;
+	assigned-clock-rates = <480000000>;
 };
diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt
index da4edb146a..7ee639b1af 100644
--- a/dts/Bindings/mmc/sdhci-msm.txt
+++ b/dts/Bindings/mmc/sdhci-msm.txt
@@ -19,6 +19,7 @@ Required properties:
 		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
 		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
+		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
 	NOTE that some old device tree files may be floating around that only
 	have the string "qcom,sdhci-msm-v4" without the SoC compatible string
 	but doing that should be considered a deprecated practice.
diff --git a/dts/Bindings/mmc/sdhci-omap.txt b/dts/Bindings/mmc/sdhci-omap.txt
index 72c4dec7e1..aeb615ef67 100644
--- a/dts/Bindings/mmc/sdhci-omap.txt
+++ b/dts/Bindings/mmc/sdhci-omap.txt
@@ -7,6 +7,8 @@ For UHS devices which require tuning, the device tree should have a "cpu_thermal
 Required properties:
 - compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
 	      Should be "ti,k2g-sdhci" for K2G
+	      Should be "ti,am335-sdhci" for am335x controllers
+	      Should be "ti,am437-sdhci" for am437x controllers
 - ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1
 	     (Not required for K2G).
 - pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50",
@@ -15,6 +17,13 @@ Required properties:
 		 "hs200_1_8v",
 - pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
 
+Optional properties:
+- dmas:		List of DMA specifiers with the controller specific format as described
+		in the generic DMA client binding. A tx and rx specifier is required.
+- dma-names:	List of DMA request names. These strings correspond 1:1 with the
+		DMA specifiers listed in dmas. The string naming is to be "tx"
+		and "rx" for TX and RX DMA requests, respectively.
+
 Example:
 	mmc1: mmc@4809c000 {
 		compatible = "ti,dra7-sdhci";
@@ -22,4 +31,6 @@ Example:
 		ti,hwmods = "mmc1";
 		bus-width = <4>;
 		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
 	};
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml b/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 0000000000..890d47a87a
--- /dev/null
+++ b/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+  - $ref: "mmc-controller.yaml#"
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: reset
+
+  clock-frequency:
+    description:
+      Should be the frequency (in Hz) of the ciu clock.  If this
+      is specified and the ciu clock is specified then we'll try to set the ciu
+      clock to this at probe time.
+
+  fifo-depth:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximum size of the tx/rx fifo's. If this property is not
+      specified, the default value of the fifo size is determined from the
+      controller registers.
+
+  card-detect-delay:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 0
+    description:
+      Delay in milli-seconds before detecting card after card
+      insert event. The default value is 0.
+
+  data-addr:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override fifo address with value provided by DT. The default FIFO reg
+      offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+      by driver. If the controller does not follow this rule, please use
+      this property to set fifo address in device tree.
+
+  fifo-watermark-aligned:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data done irq is expected if data length is less than
+      watermark in PIO mode. But fifo watermark is requested to be aligned
+      with data length in some SoC so that TX/RX irq can be generated with
+      data done irq. Add this watermark quirk to mark this requirement and
+      force fifo watermark setting accordingly.
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.txt b/dts/Bindings/mmc/synopsys-dw-mshc.txt
deleted file mode 100644
index 7e5e427a22..0000000000
--- a/dts/Bindings/mmc/synopsys-dw-mshc.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Synopsys Designware Mobile Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
-* #address-cells: should be 1.
-* #size-cells: should be 0.
-
-# Slots (DEPRECATED): The slot specific information are contained within
-  child-nodes with each child-node representing a supported slot. There should
-  be atleast one child node representing a card slot. The name of the child node
-  representing the slot is recommended to be slot@n where n is the unique number
-  of the slot connected to the controller. The following are optional properties
-  which can be included in the slot child node.
-
-	* reg: specifies the physical slot number. The valid values of this
-	  property is 0 to (num-slots -1), where num-slots is the value
-	  specified by the num-slots property.
-
-	* bus-width: as documented in mmc core bindings.
-
-	* wp-gpios: specifies the write protect gpio line. The format of the
-	  gpio specifier depends on the gpio controller. If a GPIO is not used
-	  for write-protect, this property is optional.
-
-	* disable-wp: If the wp-gpios property isn't present then (by default)
-	  we'd assume that the write protect is hooked up directly to the
-	  controller's special purpose write protect line (accessible via
-	  the WRTPRT register).  However, it's possible that we simply don't
-	  want write protect.  In that case specify 'disable-wp'.
-	  NOTE: This property is not required for slots known to always
-	  connect to eMMC or SDIO cards.
-
-Optional properties:
-
-* resets: phandle + reset specifier pair, intended to represent hardware
-  reset signal present internally in some host controller IC designs.
-  See Documentation/devicetree/bindings/reset/reset.txt for details.
-
-* reset-names: request name for using "resets" property. Must be "reset".
-	(It will be used together with "resets" property.)
-
-* clocks: from common clock binding: handle to biu and ciu clocks for the
-  bus interface unit clock and the card interface unit clock.
-
-* clock-names: from common clock binding: Shall be "biu" and "ciu".
-  If the biu clock is missing we'll simply skip enabling it.  If the
-  ciu clock is missing we'll just assume that the clock is running at
-  clock-frequency.  It is an error to omit both the ciu clock and the
-  clock-frequency.
-
-* clock-frequency: should be the frequency (in Hz) of the ciu clock.  If this
-  is specified and the ciu clock is specified then we'll try to set the ciu
-  clock to this at probe time.
-
-* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
-  specified, the default value of the fifo size is determined from the
-  controller registers.
-
-* card-detect-delay: Delay in milli-seconds before detecting card after card
-  insert event. The default value is 0.
-
-* data-addr: Override fifo address with value provided by DT. The default FIFO reg
-  offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by
-  driver. If the controller does not follow this rule, please use this property
-  to set fifo address in device tree.
-
-* fifo-watermark-aligned: Data done irq is expected if data length is less than
-  watermark in PIO mode. But fifo watermark is requested to be aligned with data
-  length in some SoC so that TX/RX irq can be generated with data done irq. Add this
-  watermark quirk to mark this requirement and force fifo watermark setting
-  accordingly.
-
-* vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
-  specified we'll defer probe until we can find this regulator.
-
-* dmas: List of DMA specifiers with the controller specific format as described
-  in the generic DMA client binding. Refer to dma.txt for details.
-
-* dma-names: request names for generic DMA client binding. Must be "rx-tx".
-  Refer to dma.txt for details.
-
-Aliases:
-
-- All the MSHC controller nodes should be represented in the aliases node using
-  the following format 'mshc{n}' where n is a unique number for the alias.
-
-Example:
-
-The MSHC controller node can be split into two portions, SoC specific and
-board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "snps,dw-mshc";
-		clocks = <&clock 351>, <&clock 132>;
-		clock-names = "biu", "ciu";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		data-addr = <0x200>;
-		fifo-watermark-aligned;
-		resets = <&rst 20>;
-		reset-names = "reset";
-	};
-
-[board specific internal DMA resources]
-
-	dwmmc0@12200000 {
-		clock-frequency = <400000000>;
-		clock-freq-min-max = <400000 200000000>;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		vmmc-supply = <&buck8>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-	};
-
-[board specific generic DMA request binding]
-
-	dwmmc0@12200000 {
-		clock-frequency = <400000000>;
-		clock-freq-min-max = <400000 200000000>;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		vmmc-supply = <&buck8>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		dmas = <&pdma 12>;
-		dma-names = "rx-tx";
-	};
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.yaml b/dts/Bindings/mmc/synopsys-dw-mshc.yaml
new file mode 100644
index 0000000000..05f9f36dcb
--- /dev/null
+++ b/dts/Bindings/mmc/synopsys-dw-mshc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Binding
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml#"
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+  compatible:
+    const: snps,dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    mmc@12200000 {
+      compatible = "snps,dw-mshc";
+      reg = <0x12200000 0x1000>;
+      interrupts = <0 75 0>;
+      clocks = <&clock 351>, <&clock 132>;
+      clock-names = "biu", "ciu";
+      dmas = <&pdma 12>;
+      dma-names = "rx-tx";
+      resets = <&rst 20>;
+      reset-names = "reset";
+      vmmc-supply = <&buck8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      broken-cd;
+      bus-width = <8>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+      card-detect-delay = <200>;
+      clock-freq-min-max = <400000 200000000>;
+      clock-frequency = <400000000>;
+      data-addr = <0x200>;
+      fifo-depth = <0x80>;
+      fifo-watermark-aligned;
+    };
diff --git a/dts/Bindings/mtd/atmel-nand.txt b/dts/Bindings/mtd/atmel-nand.txt
index 68b51dc588..3aa297c97a 100644
--- a/dts/Bindings/mtd/atmel-nand.txt
+++ b/dts/Bindings/mtd/atmel-nand.txt
@@ -57,6 +57,7 @@ Required properties:
 	"atmel,at91sam9g45-pmecc"
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
+	"microchip,sam9x60-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 
diff --git a/dts/Bindings/mtd/denali-nand.txt b/dts/Bindings/mtd/denali-nand.txt
index b32aed1db4..98916a84bb 100644
--- a/dts/Bindings/mtd/denali-nand.txt
+++ b/dts/Bindings/mtd/denali-nand.txt
@@ -14,6 +14,11 @@ Required properties:
     interface clock, and the ECC circuit clock.
   - clock-names: should contain "nand", "nand_x", "ecc"
 
+Optional properties:
+  - resets: may contain phandles to the controller core reset, the register
+    reset
+  - reset-names: may contain "nand", "reg"
+
 Sub-nodes:
   Sub-nodes represent available NAND chips.
 
@@ -46,6 +51,8 @@ nand: nand@ff900000 {
 	reg-names = "nand_data", "denali_reg";
 	clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
 	clock-names = "nand", "nand_x", "ecc";
+	resets = <&nand_rst>, <&nand_reg_rst>;
+	reset-names = "nand", "reg";
 	interrupts = <0 144 4>;
 
 	nand@0 {
diff --git a/dts/Bindings/net/broadcom-bluetooth.txt b/dts/Bindings/net/broadcom-bluetooth.txt
index f16b99571a..dd25867463 100644
--- a/dts/Bindings/net/broadcom-bluetooth.txt
+++ b/dts/Bindings/net/broadcom-bluetooth.txt
@@ -11,6 +11,7 @@ Required properties:
 
  - compatible: should contain one of the following:
    * "brcm,bcm20702a1"
+   * "brcm,bcm4329-bt"
    * "brcm,bcm4330-bt"
    * "brcm,bcm43438-bt"
    * "brcm,bcm4345c5"
@@ -22,7 +23,9 @@ Optional properties:
  - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
  - shutdown-gpios: GPIO specifier, used to enable the BT module
  - device-wakeup-gpios: GPIO specifier, used to wakeup the controller
- - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor.
+                      deprecated, replaced by interrupts and
+                      "host-wakeup" interrupt-names
  - clocks: 1 or 2 clocks as defined in clock-names below, in that order
  - clock-names: names for clock inputs, matching the clocks given
    - "extclk": deprecated, replaced by "txco"
@@ -30,7 +33,14 @@ Optional properties:
    - "lpo": external low power 32.768 kHz clock
  - vbat-supply: phandle to regulator supply for VBAT
  - vddio-supply: phandle to regulator supply for VDDIO
-
+ - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array
+    - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S
+    - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps
+    - pcm-frame-type: short, long
+    - pcm-sync-mode: slave, master
+    - pcm-clock-mode: slave, master
+ - interrupts: must be one, used to wakeup the host processor
+ - interrupt-names: must be "host-wakeup"
 
 Example:
 
@@ -41,5 +51,6 @@ Example:
        bluetooth {
                compatible = "brcm,bcm43438-bt";
                max-speed = <921600>;
+               brcm,bt-pcm-int-params = [01 02 00 01 01];
        };
 };
diff --git a/dts/Bindings/net/can/atmel-can.txt b/dts/Bindings/net/can/atmel-can.txt
index 14e52a0d86..218a3b3eb2 100644
--- a/dts/Bindings/net/can/atmel-can.txt
+++ b/dts/Bindings/net/can/atmel-can.txt
@@ -1,7 +1,8 @@
 * AT91 CAN *
 
 Required properties:
-  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or
+    "microchip,sam9x60-can"
   - reg: Should contain CAN controller registers location and length
   - interrupts: Should contain IRQ line for the CAN controller
 
diff --git a/dts/Bindings/net/can/rcar_can.txt b/dts/Bindings/net/can/rcar_can.txt
index 19e4a7d915..85c6551b60 100644
--- a/dts/Bindings/net/can/rcar_can.txt
+++ b/dts/Bindings/net/can/rcar_can.txt
@@ -7,6 +7,7 @@ Required properties:
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
 	      "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
 	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
+	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
 	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
@@ -36,8 +37,8 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
-R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+R8A77965, R8A77990, and R8A77995:
 For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
 be used by both CAN and CAN FD controller at the same time. It needs to be
 scaled to maximum frequency if any of these controllers use it. This is done
diff --git a/dts/Bindings/net/can/rcar_canfd.txt b/dts/Bindings/net/can/rcar_canfd.txt
index a901cd9be2..13a4e34c0c 100644
--- a/dts/Bindings/net/can/rcar_canfd.txt
+++ b/dts/Bindings/net/can/rcar_canfd.txt
@@ -5,6 +5,7 @@ Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
   - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
+  - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
   - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
   - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
@@ -31,8 +32,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
 child node supports the "status" property only, which is used to
 enable/disable the respective channel.
 
-Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
-R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+R8A77965, R8A77990, and R8A77995:
 In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
 and CAN FD controller at the same time. It needs to be scaled to maximum
 frequency if any of these controllers use it. This is done using the below
diff --git a/dts/Bindings/net/dsa/ar9331.txt b/dts/Bindings/net/dsa/ar9331.txt
new file mode 100644
index 0000000000..320607cbbb
--- /dev/null
+++ b/dts/Bindings/net/dsa/ar9331.txt
@@ -0,0 +1,148 @@
+Atheros AR9331 built-in switch
+=============================
+
+It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal
+MDIO bus. All PHYs are built-in as well.
+
+Required properties:
+
+ - compatible: should be: "qca,ar9331-switch"
+ - reg: Address on the MII bus for the switch.
+ - resets : Must contain an entry for each entry in reset-names.
+ - reset-names : Must include the following entries: "switch"
+ - interrupt-parent: Phandle to the parent interrupt controller
+ - interrupts: IRQ line for the switch
+ - interrupt-controller: Indicates the switch is itself an interrupt
+   controller. This is used for the PHY interrupts.
+ - #interrupt-cells: must be 1
+ - mdio: Container of PHY and devices on the switches MDIO bus.
+
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
+required and optional properties.
+Examples:
+
+eth0: ethernet@19000000 {
+	compatible = "qca,ar9330-eth";
+	reg = <0x19000000 0x200>;
+	interrupts = <4>;
+
+	resets = <&rst 9>, <&rst 22>;
+	reset-names = "mac", "mdio";
+	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+	clock-names = "eth", "mdio";
+
+	phy-mode = "mii";
+	phy-handle = <&phy_port4>;
+};
+
+eth1: ethernet@1a000000 {
+	compatible = "qca,ar9330-eth";
+	reg = <0x1a000000 0x200>;
+	interrupts = <5>;
+	resets = <&rst 13>, <&rst 23>;
+	reset-names = "mac", "mdio";
+	clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+	clock-names = "eth", "mdio";
+
+	phy-mode = "gmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch10: switch@10 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			compatible = "qca,ar9331-switch";
+			reg = <0x10>;
+			resets = <&rst 8>;
+			reset-names = "switch";
+
+			interrupt-parent = <&miscintc>;
+			interrupts = <12>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch_port0: port@0 {
+					reg = <0x0>;
+					label = "cpu";
+					ethernet = <&eth1>;
+
+					phy-mode = "gmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				switch_port1: port@1 {
+					reg = <0x1>;
+					phy-handle = <&phy_port0>;
+					phy-mode = "internal";
+				};
+
+				switch_port2: port@2 {
+					reg = <0x2>;
+					phy-handle = <&phy_port1>;
+					phy-mode = "internal";
+				};
+
+				switch_port3: port@3 {
+					reg = <0x3>;
+					phy-handle = <&phy_port2>;
+					phy-mode = "internal";
+				};
+
+				switch_port4: port@4 {
+					reg = <0x4>;
+					phy-handle = <&phy_port3>;
+					phy-mode = "internal";
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				interrupt-parent = <&switch10>;
+
+				phy_port0: phy@0 {
+					reg = <0x0>;
+					interrupts = <0>;
+				};
+
+				phy_port1: phy@1 {
+					reg = <0x1>;
+					interrupts = <0>;
+				};
+
+				phy_port2: phy@2 {
+					reg = <0x2>;
+					interrupts = <0>;
+				};
+
+				phy_port3: phy@3 {
+					reg = <0x3>;
+					interrupts = <0>;
+				};
+
+				phy_port4: phy@4 {
+					reg = <0x4>;
+					interrupts = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/dts/Bindings/net/fsl-fman.txt b/dts/Bindings/net/fsl-fman.txt
index 299c0dcd67..250f8d8cdc 100644
--- a/dts/Bindings/net/fsl-fman.txt
+++ b/dts/Bindings/net/fsl-fman.txt
@@ -403,6 +403,19 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+- fsl,erratum-a011043
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A011043 erratum
+		describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely
+		set when reading internal PCS registers. MDIO reads to
+		internal PCS registers may result in having the
+		MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and
+		read data (MDIO_DATA[MDIO_DATA]) is correct.
+		Software may get false read error when reading internal
+		PCS registers through MDIO. As a workaround, all internal
+		MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit.
+
 For internal PHY device on internal mdio bus, a PHY node should be created.
 See the definition of the PHY node in booting-without-of.txt for an
 example of how to define a PHY (Internal PHY has no interrupt line).
diff --git a/dts/Bindings/net/mediatek-dwmac.txt b/dts/Bindings/net/mediatek-dwmac.txt
index 8a08621a5b..afbcaebf06 100644
--- a/dts/Bindings/net/mediatek-dwmac.txt
+++ b/dts/Bindings/net/mediatek-dwmac.txt
@@ -14,7 +14,7 @@ Required properties:
 	Should be "macirq" for the main MAC IRQ
 - clocks: Must contain a phandle for each entry in clock-names.
 - clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref" for MT2712 SoC
+	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
 - mac-address: See ethernet.txt in the same directory
 - phy-mode: See ethernet.txt in the same directory
 - mediatek,pericfg: A phandle to the syscon node that control ethernet
@@ -23,8 +23,10 @@ Required properties:
 Optional properties:
 - mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
 	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
 - mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII/RMII interface.
+	It should be defined for RGMII/MII interface.
+	It should be defined for RMII interface.
 Both delay properties need to be a multiple of 170 for RGMII interface,
 or will round down. Range 0~31*170.
 Both delay properties need to be a multiple of 550 for MII/RMII interface,
@@ -34,13 +36,20 @@ or will round down. Range 0~31*550.
 	reference clock, which is from external PHYs, is connected to RXC pin
 	on MT2712 SoC.
 	Otherwise, is connected to TXC pin.
+- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
+	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
 - mediatek,txc-inverse: boolean property, if present indicates that
 	1. tx clock will be inversed in MII/RGMII case,
 	2. tx clock inside MAC will be inversed relative to reference clock
 	   which is from external PHYs in RMII case, and it rarely happen.
+	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+	   when the reference clock is from MT2712 SoC.
 - mediatek,rxc-inverse: boolean property, if present indicates that
 	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case.
+	2. reference clock will be inversed when arrived at MAC in RMII case, when
+	   the reference clock is from external PHYs.
+	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+	   the reference clock is from MT2712 SoC.
 - assigned-clocks: mac_main and ptp_ref clocks
 - assigned-clock-parents: parent clocks of the assigned clocks
 
@@ -50,29 +59,33 @@ Example:
 		reg = <0 0x1101c000 0 0x1300>;
 		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-names = "macirq";
-		phy-mode ="rgmii";
+		phy-mode ="rgmii-rxid";
 		mac-address = [00 55 7b b5 7d f7];
 		clock-names = "axi",
 			      "apb",
 			      "mac_main",
 			      "ptp_ref",
-			      "ptp_top";
+			      "rmii_internal";
 		clocks = <&pericfg CLK_PERI_GMAC>,
 			 <&pericfg CLK_PERI_GMAC_PCLK>,
 			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_SEL>;
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
 		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_SEL>;
+				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
 		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
-					 <&topckgen CLK_TOP_APLL1_D3>;
+					 <&topckgen CLK_TOP_APLL1_D3>,
+					 <&topckgen CLK_TOP_ETHERPLL_50M>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
 		mediatek,pericfg = <&pericfg>;
 		mediatek,tx-delay-ps = <1530>;
 		mediatek,rx-delay-ps = <1530>;
 		mediatek,rmii-rxc;
 		mediatek,txc-inverse;
 		mediatek,rxc-inverse;
-		snps,txpbl = <32>;
-		snps,rxpbl = <32>;
+		snps,txpbl = <1>;
+		snps,rxpbl = <1>;
 		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
 		snps,reset-active-low;
 	};
diff --git a/dts/Bindings/net/qualcomm-bluetooth.txt b/dts/Bindings/net/qualcomm-bluetooth.txt
index 68b67d9db6..999aceadb9 100644
--- a/dts/Bindings/net/qualcomm-bluetooth.txt
+++ b/dts/Bindings/net/qualcomm-bluetooth.txt
@@ -11,6 +11,7 @@ Required properties:
  - compatible: should contain one of the following:
    * "qcom,qca6174-bt"
    * "qcom,wcn3990-bt"
+   * "qcom,wcn3991-bt"
    * "qcom,wcn3998-bt"
 
 Optional properties for compatible string qcom,qca6174-bt:
diff --git a/dts/Bindings/net/renesas,ravb.txt b/dts/Bindings/net/renesas,ravb.txt
index 5df4aa7f68..87dad2dd8c 100644
--- a/dts/Bindings/net/renesas,ravb.txt
+++ b/dts/Bindings/net/renesas,ravb.txt
@@ -21,7 +21,8 @@ Required properties:
       - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
       - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
       - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
-      - "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+      - "renesas,etheravb-r8a7796" for the R8A77960 SoC.
+      - "renesas,etheravb-r8a77961" for the R8A77961 SoC.
       - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
       - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
       - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
@@ -37,8 +38,8 @@ Required properties:
 - reg: Offset and length of (1) the register block and (2) the stream buffer.
        The region for the register block is mandatory.
        The region for the stream buffer is optional, as it is only present on
-       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796),
-       and M3-N (R8A77965).
+       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960),
+       M3-W+ (R8A77961), and M3-N (R8A77965).
 - interrupts: A list of interrupt-specifiers, one for each entry in
 	      interrupt-names.
 	      If interrupt-names is not present, an interrupt specifier
diff --git a/dts/Bindings/net/ti,dp83867.txt b/dts/Bindings/net/ti,dp83867.txt
index 388ff48f53..44e2a4fab2 100644
--- a/dts/Bindings/net/ti,dp83867.txt
+++ b/dts/Bindings/net/ti,dp83867.txt
@@ -8,8 +8,6 @@ Required properties:
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
 		for applicable values. Required only if interface type is
 		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
-	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
-		for applicable values
 
 Note: If the interface type is PHY_INTERFACE_MODE_RGMII the TX/RX clock delays
       will be left at their default values, as set by the PHY's pin strapping.
@@ -42,6 +40,14 @@ Optional property:
 				    Some MACs work with differential SGMII clock.
 				    See data manual for details.
 
+	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
+		for applicable values (deprecated)
+
+	-tx-fifo-depth - As defined in the ethernet-controller.yaml.  Values for
+			 the depth can be found in dt-bindings/net/ti-dp83867.h
+	-rx-fifo-depth - As defined in the ethernet-controller.yaml.  Values for
+			 the depth can be found in dt-bindings/net/ti-dp83867.h
+
 Note: ti,min-output-impedance and ti,max-output-impedance are mutually
       exclusive. When both properties are present ti,max-output-impedance
       takes precedence.
@@ -55,7 +61,7 @@ Example:
 		reg = <0>;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 	};
 
 Datasheet can be found:
diff --git a/dts/Bindings/net/wireless/qcom,ath10k.txt b/dts/Bindings/net/wireless/qcom,ath10k.txt
index 017128394a..616c87746d 100644
--- a/dts/Bindings/net/wireless/qcom,ath10k.txt
+++ b/dts/Bindings/net/wireless/qcom,ath10k.txt
@@ -50,7 +50,7 @@ Optional properties:
           entry in clock-names.
 - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
 	       "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
-	       "cxo_ref_clk_pin" for "qcom,wcn3990-wifi"
+	       "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
 	       compatible target.
 - qcom,msi_addr: MSI interrupt address.
 - qcom,msi_base: Base value to add before writing MSI data into
@@ -88,6 +88,9 @@ Optional properties:
 		    of the host capability QMI request
 - qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
 
+- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
+		       mapped msa region.
+
 Example (to supply PCI based wifi block details):
 
 In this example, the node is defined as child node of the PCI controller.
@@ -185,4 +188,5 @@ wifi@18000000 {
 		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 		memory-region = <&wifi_msa_mem>;
 		iommus = <&apps_smmu 0x0040 0x1>;
+		qcom,msa-fixed-perm;
 };
diff --git a/dts/Bindings/net/wireless/qcom,ath11k.yaml b/dts/Bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 0000000000..a1717db36d
--- /dev/null
+++ b/dts/Bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices Generic Binding
+
+maintainers:
+  - Kalle Valo <kvalo@codeaurora.org>
+
+description: |
+  These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
+  devices, for example like AHB based IPQ8074.
+
+properties:
+  compatible:
+    const: qcom,ipq8074-wifi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: misc-pulse1 interrupt events
+      - description: misc-latch interrupt events
+      - description: sw exception interrupt events
+      - description: watchdog interrupt events
+      - description: interrupt event for ring CE0
+      - description: interrupt event for ring CE1
+      - description: interrupt event for ring CE2
+      - description: interrupt event for ring CE3
+      - description: interrupt event for ring CE4
+      - description: interrupt event for ring CE5
+      - description: interrupt event for ring CE6
+      - description: interrupt event for ring CE7
+      - description: interrupt event for ring CE8
+      - description: interrupt event for ring CE9
+      - description: interrupt event for ring CE10
+      - description: interrupt event for ring CE11
+      - description: interrupt event for ring host2wbm-desc-feed
+      - description: interrupt event for ring host2reo-re-injection
+      - description: interrupt event for ring host2reo-command
+      - description: interrupt event for ring host2rxdma-monitor-ring3
+      - description: interrupt event for ring host2rxdma-monitor-ring2
+      - description: interrupt event for ring host2rxdma-monitor-ring1
+      - description: interrupt event for ring reo2ost-exception
+      - description: interrupt event for ring wbm2host-rx-release
+      - description: interrupt event for ring reo2host-status
+      - description: interrupt event for ring reo2host-destination-ring4
+      - description: interrupt event for ring reo2host-destination-ring3
+      - description: interrupt event for ring reo2host-destination-ring2
+      - description: interrupt event for ring reo2host-destination-ring1
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+      - description: interrupt event for ring ppdu-end-interrupts-mac3
+      - description: interrupt event for ring ppdu-end-interrupts-mac2
+      - description: interrupt event for ring ppdu-end-interrupts-mac1
+      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+      - description: interrupt event for ring rxdma2host-destination-ring-mac3
+      - description: interrupt event for ring rxdma2host-destination-ring-mac2
+      - description: interrupt event for ring rxdma2host-destination-ring-mac1
+      - description: interrupt event for ring host2tcl-input-ring4
+      - description: interrupt event for ring host2tcl-input-ring3
+      - description: interrupt event for ring host2tcl-input-ring2
+      - description: interrupt event for ring host2tcl-input-ring1
+      - description: interrupt event for ring wbm2host-tx-completions-ring3
+      - description: interrupt event for ring wbm2host-tx-completions-ring2
+      - description: interrupt event for ring wbm2host-tx-completions-ring1
+      - description: interrupt event for ring tcl2host-status-ring
+
+
+  interrupt-names:
+    items:
+      - const: misc-pulse1
+      - const: misc-latch
+      - const: sw-exception
+      - const: watchdog
+      - const: ce0
+      - const: ce1
+      - const: ce2
+      - const: ce3
+      - const: ce4
+      - const: ce5
+      - const: ce6
+      - const: ce7
+      - const: ce8
+      - const: ce9
+      - const: ce10
+      - const: ce11
+      - const: host2wbm-desc-feed
+      - const: host2reo-re-injection
+      - const: host2reo-command
+      - const: host2rxdma-monitor-ring3
+      - const: host2rxdma-monitor-ring2
+      - const: host2rxdma-monitor-ring1
+      - const: reo2ost-exception
+      - const: wbm2host-rx-release
+      - const: reo2host-status
+      - const: reo2host-destination-ring4
+      - const: reo2host-destination-ring3
+      - const: reo2host-destination-ring2
+      - const: reo2host-destination-ring1
+      - const: rxdma2host-monitor-destination-mac3
+      - const: rxdma2host-monitor-destination-mac2
+      - const: rxdma2host-monitor-destination-mac1
+      - const: ppdu-end-interrupts-mac3
+      - const: ppdu-end-interrupts-mac2
+      - const: ppdu-end-interrupts-mac1
+      - const: rxdma2host-monitor-status-ring-mac3
+      - const: rxdma2host-monitor-status-ring-mac2
+      - const: rxdma2host-monitor-status-ring-mac1
+      - const: host2rxdma-host-buf-ring-mac3
+      - const: host2rxdma-host-buf-ring-mac2
+      - const: host2rxdma-host-buf-ring-mac1
+      - const: rxdma2host-destination-ring-mac3
+      - const: rxdma2host-destination-ring-mac2
+      - const: rxdma2host-destination-ring-mac1
+      - const: host2tcl-input-ring4
+      - const: host2tcl-input-ring3
+      - const: host2tcl-input-ring2
+      - const: host2tcl-input-ring1
+      - const: wbm2host-tx-completions-ring3
+      - const: wbm2host-tx-completions-ring2
+      - const: wbm2host-tx-completions-ring1
+      - const: tcl2host-status-ring
+
+  qcom,rproc:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      DT entry of q6v5-wcss remoteproc driver.
+      Phandle to a node that can contain the following properties
+        * compatible
+        * reg
+        * reg-names
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - qcom,rproc
+
+additionalProperties: false
+
+examples:
+  - |
+
+    q6v5_wcss: q6v5_wcss@CD00000 {
+        compatible = "qcom,ipq8074-wcss-pil";
+        reg = <0xCD00000 0x4040>,
+              <0x4AB000 0x20>;
+        reg-names = "qdsp6",
+                    "rmb";
+    };
+
+    wifi0: wifi@c000000 {
+        compatible = "qcom,ipq8074-wifi";
+        reg = <0xc000000 0x2000000>;
+        interrupts = <0 320 1>,
+                     <0 319 1>,
+                     <0 318 1>,
+                     <0 317 1>,
+                     <0 316 1>,
+                     <0 315 1>,
+                     <0 314 1>,
+                     <0 311 1>,
+                     <0 310 1>,
+                     <0 411 1>,
+                     <0 410 1>,
+                     <0 40 1>,
+                     <0 39 1>,
+                     <0 302 1>,
+                     <0 301 1>,
+                     <0 37 1>,
+                     <0 36 1>,
+                     <0 296 1>,
+                     <0 295 1>,
+                     <0 294 1>,
+                     <0 293 1>,
+                     <0 292 1>,
+                     <0 291 1>,
+                     <0 290 1>,
+                     <0 289 1>,
+                     <0 288 1>,
+                     <0 239 1>,
+                     <0 236 1>,
+                     <0 235 1>,
+                     <0 234 1>,
+                     <0 233 1>,
+                     <0 232 1>,
+                     <0 231 1>,
+                     <0 230 1>,
+                     <0 229 1>,
+                     <0 228 1>,
+                     <0 224 1>,
+                     <0 223 1>,
+                     <0 203 1>,
+                     <0 183 1>,
+                     <0 180 1>,
+                     <0 179 1>,
+                     <0 178 1>,
+                     <0 177 1>,
+                     <0 176 1>,
+                     <0 163 1>,
+                     <0 162 1>,
+                     <0 160 1>,
+                     <0 159 1>,
+                     <0 158 1>,
+                     <0 157 1>,
+                     <0 156 1>;
+        interrupt-names = "misc-pulse1",
+                          "misc-latch",
+                          "sw-exception",
+                          "watchdog",
+                          "ce0",
+                          "ce1",
+                          "ce2",
+                          "ce3",
+                          "ce4",
+                          "ce5",
+                          "ce6",
+                          "ce7",
+                          "ce8",
+                          "ce9",
+                          "ce10",
+                          "ce11",
+                          "host2wbm-desc-feed",
+                          "host2reo-re-injection",
+                          "host2reo-command",
+                          "host2rxdma-monitor-ring3",
+                          "host2rxdma-monitor-ring2",
+                          "host2rxdma-monitor-ring1",
+                          "reo2ost-exception",
+                          "wbm2host-rx-release",
+                          "reo2host-status",
+                          "reo2host-destination-ring4",
+                          "reo2host-destination-ring3",
+                          "reo2host-destination-ring2",
+                          "reo2host-destination-ring1",
+                          "rxdma2host-monitor-destination-mac3",
+                          "rxdma2host-monitor-destination-mac2",
+                          "rxdma2host-monitor-destination-mac1",
+                          "ppdu-end-interrupts-mac3",
+                          "ppdu-end-interrupts-mac2",
+                          "ppdu-end-interrupts-mac1",
+                          "rxdma2host-monitor-status-ring-mac3",
+                          "rxdma2host-monitor-status-ring-mac2",
+                          "rxdma2host-monitor-status-ring-mac1",
+                          "host2rxdma-host-buf-ring-mac3",
+                          "host2rxdma-host-buf-ring-mac2",
+                          "host2rxdma-host-buf-ring-mac1",
+                          "rxdma2host-destination-ring-mac3",
+                          "rxdma2host-destination-ring-mac2",
+                          "rxdma2host-destination-ring-mac1",
+                          "host2tcl-input-ring4",
+                          "host2tcl-input-ring3",
+                          "host2tcl-input-ring2",
+                          "host2tcl-input-ring1",
+                          "wbm2host-tx-completions-ring3",
+                          "wbm2host-tx-completions-ring2",
+                          "wbm2host-tx-completions-ring1",
+                          "tcl2host-status-ring";
+        qcom,rproc = <&q6v5_wcss>;
+    };
diff --git a/dts/Bindings/nvmem/imx-ocotp.txt b/dts/Bindings/nvmem/imx-ocotp.txt
index 904dadf3d0..6e346d5cdd 100644
--- a/dts/Bindings/nvmem/imx-ocotp.txt
+++ b/dts/Bindings/nvmem/imx-ocotp.txt
@@ -2,7 +2,7 @@ Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
 
 This binding represents the on-chip eFuse OTP controller found on
 i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL,
-i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM and i.MX8MN SoCs.
+i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
 
 Required properties:
 - compatible: should be one of
@@ -17,6 +17,7 @@ Required properties:
 	"fsl,imx8mq-ocotp" (i.MX8MQ),
 	"fsl,imx8mm-ocotp" (i.MX8MM),
 	"fsl,imx8mn-ocotp" (i.MX8MN),
+	"fsl,imx8mp-ocotp" (i.MX8MP),
 	followed by "syscon".
 - #address-cells : Should be 1
 - #size-cells : Should be 1
diff --git a/dts/Bindings/nvmem/nvmem.yaml b/dts/Bindings/nvmem/nvmem.yaml
index 1c75a05920..b43c6c6529 100644
--- a/dts/Bindings/nvmem/nvmem.yaml
+++ b/dts/Bindings/nvmem/nvmem.yaml
@@ -34,6 +34,14 @@ properties:
     description:
       Mark the provider as read only.
 
+  wp-gpios:
+    description:
+      GPIO to which the write-protect pin of the chip is connected.
+      The write-protect GPIO is asserted, when it's driven high
+      (logical '1') to block the write operation. It's deasserted,
+      when it's driven low (logical '0') to allow writing.
+    maxItems: 1
+
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
@@ -63,9 +71,12 @@ patternProperties:
 
 examples:
   - |
+      #include <dt-bindings/gpio/gpio.h>
+
       qfprom: eeprom@700000 {
           #address-cells = <1>;
           #size-cells = <1>;
+          wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 
           /* ... */
 
diff --git a/dts/Bindings/nvmem/qcom,spmi-sdam.yaml b/dts/Bindings/nvmem/qcom,spmi-sdam.yaml
new file mode 100644
index 0000000000..7bbd4e6204
--- /dev/null
+++ b/dts/Bindings/nvmem/qcom,spmi-sdam.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,spmi-sdam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SPMI SDAM DT bindings
+
+maintainers:
+  - Shyam Kumar Thella <sthella@codeaurora.org>
+
+description: |
+  The SDAM provides scratch register space for the PMIC clients. This
+  memory can be used by software to store information or communicate
+  to/from the PBUS.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,spmi-sdam
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+
+    properties:
+      reg:
+        maxItems: 1
+        description:
+          Offset and size in bytes within the storage device.
+
+      bits:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        maxItems: 1
+        items:
+          items:
+            - minimum: 0
+              maximum: 7
+              description:
+                Offset in bit within the address range specified by reg.
+            - minimum: 1
+              description:
+                Size in bit within the address range specified by reg.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+      sdam_1: nvram@b000 {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          compatible = "qcom,spmi-sdam";
+          reg = <0xb000 0x100>;
+          ranges = <0 0xb000 0x100>;
+
+          /* Data cells */
+          restart_reason: restart@50 {
+              reg = <0x50 0x1>;
+              bits = <6 2>;
+          };
+      };
+...
diff --git a/dts/Bindings/nvmem/st,stm32-romem.txt b/dts/Bindings/nvmem/st,stm32-romem.txt
deleted file mode 100644
index 142a51d5a9..0000000000
--- a/dts/Bindings/nvmem/st,stm32-romem.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-STMicroelectronics STM32 Factory-programmed data device tree bindings
-
-This represents STM32 Factory-programmed read only non-volatile area: locked
-flash, OTP, read-only HW regs... This contains various information such as:
-analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2),
-internal vref (VREFIN_CAL), unique device ID...
-
-Required properties:
-- compatible:		Should be one of:
-			"st,stm32f4-otp"
-			"st,stm32mp15-bsec"
-- reg:			Offset and length of factory-programmed area.
-- #address-cells:	Should be '<1>'.
-- #size-cells:		Should be '<1>'.
-
-Optional Data cells:
-- Must be child nodes as described in nvmem.txt.
-
-Example on stm32f4:
-	romem: nvmem@1fff7800 {
-		compatible = "st,stm32f4-otp";
-		reg = <0x1fff7800 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* Data cells: ts_cal1 at 0x1fff7a2c */
-		ts_cal1: calib@22c {
-			reg = <0x22c 0x2>;
-		};
-		...
-	};
diff --git a/dts/Bindings/nvmem/st,stm32-romem.yaml b/dts/Bindings/nvmem/st,stm32-romem.yaml
new file mode 100644
index 0000000000..d84deb4774
--- /dev/null
+++ b/dts/Bindings/nvmem/st,stm32-romem.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Factory-programmed data bindings
+
+description: |
+  This represents STM32 Factory-programmed read only non-volatile area: locked
+  flash, OTP, read-only HW regs... This contains various information such as:
+  analog calibration data for temperature sensor (e.g. TS_CAL1, TS_CAL2),
+  internal vref (VREFIN_CAL), unique device ID...
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-otp
+      - st,stm32mp15-bsec
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+examples:
+  - |
+    efuse@1fff7800 {
+      compatible = "st,stm32f4-otp";
+      reg = <0x1fff7800 0x400>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      calib@22c {
+        reg = <0x22c 0x2>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
new file mode 100644
index 0000000000..aef87a33a7
--- /dev/null
+++ b/dts/Bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 CPU OPP Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description: |
+  For some SoCs, the CPU frequency subset and voltage value of each
+  OPP varies based on the silicon variant in use. Allwinner Process
+  Voltage Scaling Tables defines the voltage and frequency value based
+  on the speedbin blown in the efuse combination. The
+  sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
+  provide the OPP framework with required information.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-operating-points
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the efuse
+      registers that has information about the speedbin that is used
+      to select the right frequency/voltage value pair. Please refer
+      the for nvmem-cells bindings
+      Documentation/devicetree/bindings/nvmem/nvmem.txt and also
+      examples below.
+
+required:
+  - compatible
+  - nvmem-cells
+
+patternProperties:
+  "opp-[0-9]+":
+    type: object
+
+    properties:
+      opp-hz: true
+
+    patternProperties:
+      "opp-microvolt-.*": true
+
+    required:
+      - opp-hz
+      - opp-microvolt-speed0
+      - opp-microvolt-speed1
+      - opp-microvolt-speed2
+
+    unevaluatedProperties: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    cpu_opp_table: opp-table {
+        compatible = "allwinner,sun50i-h6-operating-points";
+        nvmem-cells = <&speedbin_efuse>;
+        opp-shared;
+
+        opp-480000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <480000000>;
+
+            opp-microvolt-speed0 = <880000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-720000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <720000000>;
+
+            opp-microvolt-speed0 = <880000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-816000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <816000000>;
+
+            opp-microvolt-speed0 = <880000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-888000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <888000000>;
+
+            opp-microvolt-speed0 = <940000>;
+            opp-microvolt-speed1 = <820000>;
+            opp-microvolt-speed2 = <800000>;
+        };
+
+        opp-1080000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <1080000000>;
+
+            opp-microvolt-speed0 = <1060000>;
+            opp-microvolt-speed1 = <880000>;
+            opp-microvolt-speed2 = <840000>;
+        };
+
+        opp-1320000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <1320000000>;
+
+            opp-microvolt-speed0 = <1160000>;
+            opp-microvolt-speed1 = <940000>;
+            opp-microvolt-speed2 = <900000>;
+        };
+
+        opp-1488000000 {
+            clock-latency-ns = <244144>; /* 8 32k periods */
+            opp-hz = /bits/ 64 <1488000000>;
+
+            opp-microvolt-speed0 = <1160000>;
+            opp-microvolt-speed1 = <1000000>;
+            opp-microvolt-speed2 = <960000>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/opp/sun50i-nvmem-cpufreq.txt b/dts/Bindings/opp/sun50i-nvmem-cpufreq.txt
deleted file mode 100644
index 7deae57a58..0000000000
--- a/dts/Bindings/opp/sun50i-nvmem-cpufreq.txt
+++ /dev/null
@@ -1,167 +0,0 @@
-Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings
-===================================
-
-For some SoCs, the CPU frequency subset and voltage value of each OPP
-varies based on the silicon variant in use. Allwinner Process Voltage
-Scaling Tables defines the voltage and frequency value based on the
-speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver
-reads the efuse value from the SoC to provide the OPP framework with
-required information.
-
-Required properties:
---------------------
-In 'cpus' nodes:
-- operating-points-v2: Phandle to the operating-points-v2 table to use.
-
-In 'operating-points-v2' table:
-- compatible: Should be
-	- 'allwinner,sun50i-h6-operating-points'.
-- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
-		efuse registers that has information about the speedbin
-		that is used to select the right frequency/voltage value
-		pair. Please refer the for nvmem-cells bindings
-		Documentation/devicetree/bindings/nvmem/nvmem.txt and
-		also examples below.
-
-In every OPP node:
-- opp-microvolt-<name>: Voltage in micro Volts.
-			At runtime, the platform can pick a <name> and
-			matching opp-microvolt-<name> property.
-			[See: opp.txt]
-			HW:		<name>:
-			sun50i-h6	speed0 speed1 speed2
-
-Example 1:
----------
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a53";
-			device_type = "cpu";
-			reg = <0>;
-			enable-method = "psci";
-			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a53";
-			device_type = "cpu";
-			reg = <1>;
-			enable-method = "psci";
-			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu2: cpu@2 {
-			compatible = "arm,cortex-a53";
-			device_type = "cpu";
-			reg = <2>;
-			enable-method = "psci";
-			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu3: cpu@3 {
-			compatible = "arm,cortex-a53";
-			device_type = "cpu";
-			reg = <3>;
-			enable-method = "psci";
-			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-		};
-        };
-
-        cpu_opp_table: opp_table {
-                compatible = "allwinner,sun50i-h6-operating-points";
-                nvmem-cells = <&speedbin_efuse>;
-                opp-shared;
-
-                opp@480000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <480000000>;
-
-                        opp-microvolt-speed0 = <880000>;
-                        opp-microvolt-speed1 = <820000>;
-                        opp-microvolt-speed2 = <800000>;
-                };
-
-                opp@720000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <720000000>;
-
-                        opp-microvolt-speed0 = <880000>;
-                        opp-microvolt-speed1 = <820000>;
-                        opp-microvolt-speed2 = <800000>;
-                };
-
-                opp@816000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <816000000>;
-
-                        opp-microvolt-speed0 = <880000>;
-                        opp-microvolt-speed1 = <820000>;
-                        opp-microvolt-speed2 = <800000>;
-                };
-
-                opp@888000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <888000000>;
-
-                        opp-microvolt-speed0 = <940000>;
-                        opp-microvolt-speed1 = <820000>;
-                        opp-microvolt-speed2 = <800000>;
-                };
-
-                opp@1080000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <1080000000>;
-
-                        opp-microvolt-speed0 = <1060000>;
-                        opp-microvolt-speed1 = <880000>;
-                        opp-microvolt-speed2 = <840000>;
-                };
-
-                opp@1320000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <1320000000>;
-
-                        opp-microvolt-speed0 = <1160000>;
-                        opp-microvolt-speed1 = <940000>;
-                        opp-microvolt-speed2 = <900000>;
-                };
-
-                opp@1488000000 {
-                        clock-latency-ns = <244144>; /* 8 32k periods */
-                        opp-hz = /bits/ 64 <1488000000>;
-
-                        opp-microvolt-speed0 = <1160000>;
-                        opp-microvolt-speed1 = <1000000>;
-                        opp-microvolt-speed2 = <960000>;
-                };
-        };
-....
-soc {
-....
-	sid: sid@3006000 {
-		compatible = "allwinner,sun50i-h6-sid";
-		reg = <0x03006000 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		....
-		speedbin_efuse: speed@1c {
-			reg = <0x1c 4>;
-		};
-        };
-};
diff --git a/dts/Bindings/pci/arm,juno-r1-pcie.txt b/dts/Bindings/pci/arm,juno-r1-pcie.txt
deleted file mode 100644
index f7514c170a..0000000000
--- a/dts/Bindings/pci/arm,juno-r1-pcie.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-* ARM Juno R1 PCIe interface
-
-This PCIe host controller is based on PLDA XpressRICH3-AXI IP
-and thus inherits all the common properties defined in plda,xpressrich3-axi.txt
-as well as the base properties defined in host-generic-pci.txt.
-
-Required properties:
- - compatible: "arm,juno-r1-pcie"
- - dma-coherent: The host controller bridges the AXI transactions into PCIe bus
-   in a manner that makes the DMA operations to appear coherent to the CPUs.
diff --git a/dts/Bindings/pci/brcm,stb-pcie.yaml b/dts/Bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 0000000000..77d3e81a43
--- /dev/null
+++ b/dts/Bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  ranges:
+    maxItems: 1
+
+  dma-ranges:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    brcm,enable-ssc;
+            };
+    };
diff --git a/dts/Bindings/pci/designware-pcie-ecam.txt b/dts/Bindings/pci/designware-pcie-ecam.txt
deleted file mode 100644
index 515b2f9542..0000000000
--- a/dts/Bindings/pci/designware-pcie-ecam.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Synopsys DesignWare PCIe root complex in ECAM shift mode
-
-In some cases, firmware may already have configured the Synopsys DesignWare
-PCIe controller in RC mode with static ATU window mappings that cover all
-config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion.
-In this case, there is no need for the OS to perform any low level setup
-of clocks, PHYs or device registers, nor is there any reason for the driver
-to reconfigure ATU windows for config and/or IO space accesses at runtime.
-
-In cases where the IP was synthesized with a minimum ATU window size of
-64 KB, it cannot be supported by the generic ECAM driver, because it
-requires special config space accessors that filter accesses to device #1
-and beyond on the first bus.
-
-Required properties:
-- compatible: "marvell,armada8k-pcie-ecam" or
-              "socionext,synquacer-pcie-ecam" or
-              "snps,dw-pcie-ecam" (must be preceded by a more specific match)
-
-Please refer to the binding document of "pci-host-ecam-generic" in the
-file host-generic-pci.txt for a description of the remaining required
-and optional properties.
-
-Example:
-
-    pcie1: pcie@7f000000 {
-        compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
-        device_type = "pci";
-        reg = <0x0 0x7f000000 0x0 0xf00000>;
-        bus-range = <0x0 0xe>;
-        #address-cells = <3>;
-        #size-cells = <2>;
-        ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>,
-                 <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>,
-                 <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>;
-
-        #interrupt-cells = <0x1>;
-        interrupt-map-mask = <0x0 0x0 0x0 0x0>;
-        interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>;
-        msi-map = <0x0 &its 0x0 0x10000>;
-        dma-coherent;
-    };
diff --git a/dts/Bindings/pci/hisilicon-pcie.txt b/dts/Bindings/pci/hisilicon-pcie.txt
index 0dcb87d655..d6796ef54e 100644
--- a/dts/Bindings/pci/hisilicon-pcie.txt
+++ b/dts/Bindings/pci/hisilicon-pcie.txt
@@ -41,45 +41,3 @@ Hip05 Example (note that Hip06 is the same except compatible):
 				 0x0 0 0 3 &mbigen_pcie 3 12
 				 0x0 0 0 4 &mbigen_pcie 4 13>;
 	};
-
-HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
-
-Some BIOSes place the host controller in a mode where it is ECAM
-compliant for all devices other than the root complex. In such cases,
-the host controller should be described as below.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
-		   "hisilicon,hip07-pcie-ecam"
-
-- reg            : Two entries: First the ECAM configuration space for any
-		   other bus underneath the root bus. Second, the base
-		   and size of the HiSilicon host bridge registers include
-		   the RC's own config space.
-
-Example:
-	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,hip06-pcie-ecam";
-		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
-		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
-		bus-range = <0  31>;
-		msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
-		msi-map-mask = <0xffff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
-			  0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
-				 0x0 0 0 2 &mbigen_pcie0 650 4
-				 0x0 0 0 3 &mbigen_pcie0 650 4
-				 0x0 0 0 4 &mbigen_pcie0 650 4>;
-	};
diff --git a/dts/Bindings/pci/host-generic-pci.txt b/dts/Bindings/pci/host-generic-pci.txt
deleted file mode 100644
index 614b594f4e..0000000000
--- a/dts/Bindings/pci/host-generic-pci.txt
+++ /dev/null
@@ -1,101 +0,0 @@
-* Generic PCI host controller
-
-Firmware-initialised PCI host controllers and PCI emulations, such as the
-virtio-pci implementations found in kvmtool and other para-virtualised
-systems, do not require driver support for complexities such as regulator
-and clock management. In fact, the controller may not even require the
-configuration of a control interface by the operating system, instead
-presenting a set of fixed windows describing a subset of IO, Memory and
-Configuration Spaces.
-
-Such a controller can be described purely in terms of the standardized device
-tree bindings communicated in pci.txt:
-
-
-Properties of the host controller node:
-
-- compatible     : Must be "pci-host-cam-generic" or "pci-host-ecam-generic"
-                   depending on the layout of configuration space (CAM vs
-                   ECAM respectively).
-
-- device_type    : Must be "pci".
-
-- ranges         : As described in IEEE Std 1275-1994, but must provide
-                   at least a definition of non-prefetchable memory. One
-                   or both of prefetchable Memory and IO Space may also
-                   be provided.
-
-- bus-range      : Optional property (also described in IEEE Std 1275-1994)
-                   to indicate the range of bus numbers for this controller.
-                   If absent, defaults to <0 255> (i.e. all buses).
-
-- #address-cells : Must be 3.
-
-- #size-cells    : Must be 2.
-
-- reg            : The Configuration Space base address and size, as accessed
-                   from the parent bus.  The base address corresponds to
-                   the first bus in the "bus-range" property.  If no
-                   "bus-range" is specified, this will be bus 0 (the default).
-
-Properties of the /chosen node:
-
-- linux,pci-probe-only
-                 : Optional property which takes a single-cell argument.
-                   If '0', then Linux will assign devices in its usual manner,
-                   otherwise it will not try to assign devices and instead use
-                   them as they are configured already.
-
-Configuration Space is assumed to be memory-mapped (as opposed to being
-accessed via an ioport) and laid out with a direct correspondence to the
-geography of a PCI bus address by concatenating the various components to
-form an offset.
-
-For CAM, this 24-bit offset is:
-
-        cfg_offset(bus, device, function, register) =
-                   bus << 16 | device << 11 | function << 8 | register
-
-While ECAM extends this by 4 bits to accommodate 4k of function space:
-
-        cfg_offset(bus, device, function, register) =
-                   bus << 20 | device << 15 | function << 12 | register
-
-Interrupt mapping is exactly as described in `Open Firmware Recommended
-Practice: Interrupt Mapping' and requires the following properties:
-
-- #interrupt-cells   : Must be 1
-
-- interrupt-map      : <see aforementioned specification>
-
-- interrupt-map-mask : <see aforementioned specification>
-
-
-Example:
-
-pci {
-    compatible = "pci-host-cam-generic"
-    device_type = "pci";
-    #address-cells = <3>;
-    #size-cells = <2>;
-    bus-range = <0x0 0x1>;
-
-    // CPU_PHYSICAL(2)  SIZE(2)
-    reg = <0x0 0x40000000  0x0 0x1000000>;
-
-    // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
-    ranges = <0x01000000 0x0 0x01000000  0x0 0x01000000  0x0 0x00010000>,
-             <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x3f000000>;
-
-
-    #interrupt-cells = <0x1>;
-
-    // PCI_DEVICE(3)  INT#(1)  CONTROLLER(PHANDLE)  CONTROLLER_DATA(3)
-    interrupt-map = <  0x0 0x0 0x0  0x1  &gic  0x0 0x4 0x1
-                     0x800 0x0 0x0  0x1  &gic  0x0 0x5 0x1
-                    0x1000 0x0 0x0  0x1  &gic  0x0 0x6 0x1
-                    0x1800 0x0 0x0  0x1  &gic  0x0 0x7 0x1>;
-
-    // PCI_DEVICE(3)  INT#(1)
-    interrupt-map-mask = <0xf800 0x0 0x0  0x7>;
-}
diff --git a/dts/Bindings/pci/host-generic-pci.yaml b/dts/Bindings/pci/host-generic-pci.yaml
new file mode 100644
index 0000000000..47353d0cd3
--- /dev/null
+++ b/dts/Bindings/pci/host-generic-pci.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/host-generic-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PCI host controller
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+
+description: |
+  Firmware-initialised PCI host controllers and PCI emulations, such as the
+  virtio-pci implementations found in kvmtool and other para-virtualised
+  systems, do not require driver support for complexities such as regulator
+  and clock management. In fact, the controller may not even require the
+  configuration of a control interface by the operating system, instead
+  presenting a set of fixed windows describing a subset of IO, Memory and
+  Configuration Spaces.
+
+  Configuration Space is assumed to be memory-mapped (as opposed to being
+  accessed via an ioport) and laid out with a direct correspondence to the
+  geography of a PCI bus address by concatenating the various components to
+  form an offset.
+
+  For CAM, this 24-bit offset is:
+
+          cfg_offset(bus, device, function, register) =
+                     bus << 16 | device << 11 | function << 8 | register
+
+  While ECAM extends this by 4 bits to accommodate 4k of function space:
+
+          cfg_offset(bus, device, function, register) =
+                     bus << 20 | device << 15 | function << 12 | register
+
+properties:
+  compatible:
+    description: Depends on the layout of configuration space (CAM vs ECAM
+      respectively). May also have more specific compatibles.
+    oneOf:
+      - description:
+          PCIe host controller in Arm Juno based on PLDA XpressRICH3-AXI IP
+        items:
+          - const: arm,juno-r1-pcie
+          - const: plda,xpressrich3-axi
+          - const: pci-host-ecam-generic
+      - description: |
+          ThunderX PCI host controller for pass-1.x silicon
+
+          Firmware-initialized PCI host controller to on-chip devices found on
+          some Cavium ThunderX processors.  These devices have ECAM-based config
+          access, but the BARs are all at fixed addresses.  We handle the fixed
+          addresses by synthesizing Enhanced Allocation (EA) capabilities for
+          these devices.
+        const: cavium,pci-host-thunder-ecam
+      - description:
+          Cavium ThunderX PEM firmware-initialized PCIe host controller
+        const: cavium,pci-host-thunder-pem
+      - description:
+          HiSilicon Hip06/Hip07 PCIe host bridge in almost-ECAM mode. Some
+          firmware places the host controller in a mode where it is ECAM
+          compliant for all devices other than the root complex.
+        enum:
+          - hisilicon,hip06-pcie-ecam
+          - hisilicon,hip07-pcie-ecam
+      - description: |
+          In some cases, firmware may already have configured the Synopsys
+          DesignWare PCIe controller in RC mode with static ATU window mappings
+          that cover all config, MMIO and I/O spaces in a [mostly] ECAM
+          compatible fashion. In this case, there is no need for the OS to
+          perform any low level setup of clocks, PHYs or device registers, nor
+          is there any reason for the driver to reconfigure ATU windows for
+          config and/or IO space accesses at runtime.
+
+          In cases where the IP was synthesized with a minimum ATU window size
+          of 64 KB, it cannot be supported by the generic ECAM driver, because
+          it requires special config space accessors that filter accesses to
+          device #1 and beyond on the first bus.
+        items:
+          - enum:
+              - marvell,armada8k-pcie-ecam
+              - socionext,synquacer-pcie-ecam
+          - const: snps,dw-pcie-ecam
+      - description:
+          CAM or ECAM compliant PCI host controllers without any quirks
+        enum:
+          - pci-host-cam-generic
+          - pci-host-ecam-generic
+
+  reg:
+    description:
+      The Configuration Space base address and size, as accessed from the parent
+      bus. The base address corresponds to the first bus in the "bus-range"
+      property. If no "bus-range" is specified, this will be bus 0 (the
+      default). Some host controllers have a 2nd non-compliant address range,
+      so 2 entries are allowed.
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    description:
+      As described in IEEE Std 1275-1994, but must provide at least a
+      definition of non-prefetchable memory. One or both of prefetchable Memory
+      and IO Space may also be provided.
+    minItems: 1
+    maxItems: 3
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,juno-r1-pcie
+    then:
+      required:
+        - dma-coherent
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - cavium,pci-host-thunder-pem
+                - hisilicon,hip06-pcie-ecam
+                - hisilicon,hip07-pcie-ecam
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@40000000 {
+            compatible = "pci-host-cam-generic";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            bus-range = <0x0 0x1>;
+
+            // CPU_PHYSICAL(2)  SIZE(2)
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+
+            // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+            ranges = <0x01000000 0x0 0x01000000  0x0 0x01000000  0x0 0x00010000>,
+                     <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x3f000000>;
+
+            #interrupt-cells = <0x1>;
+
+            // PCI_DEVICE(3)  INT#(1)  CONTROLLER(PHANDLE)  CONTROLLER_DATA(3)
+            interrupt-map = <   0x0 0x0 0x0  0x1  &gic  0x0 0x4 0x1>,
+                            < 0x800 0x0 0x0  0x1  &gic  0x0 0x5 0x1>,
+                            <0x1000 0x0 0x0  0x1  &gic  0x0 0x6 0x1>,
+                            <0x1800 0x0 0x0  0x1  &gic  0x0 0x7 0x1>;
+
+            // PCI_DEVICE(3)  INT#(1)
+            interrupt-map-mask = <0xf800 0x0 0x0  0x7>;
+        };
+    };
+...
diff --git a/dts/Bindings/pci/intel-gw-pcie.yaml b/dts/Bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 0000000000..48a98dae00
--- /dev/null
+++ b/dts/Bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    items:
+      - const: intel,lgm-pcie
+      - const: snps,dw-pcie
+
+  device_type:
+    const: pci
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  reg:
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe configuration registers.
+      - description: Controller application registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: app
+
+  ranges:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,pci-domain: true
+
+  num-lanes:
+    maximum: 2
+    description: Number of lanes to use for this port.
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-map-mask:
+    description: Standard PCI IRQ mapping properties.
+
+  interrupt-map:
+    description: Standard PCI IRQ mapping properties.
+
+  max-link-speed:
+    description: Specify PCI Gen for link capability.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 1, 2, 3, 4 ]
+      - default: 1
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  reset-assert-ms:
+    description: |
+      Delay after asserting reset to the PCIe device.
+    maximum: 500
+    default: 100
+
+required:
+  - compatible
+  - device_type
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - reg-names
+  - ranges
+  - resets
+  - clocks
+  - phys
+  - phy-names
+  - reset-gpios
+  - '#interrupt-cells'
+  - interrupt-map
+  - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    pcie10: pcie@d0e00000 {
+      compatible = "intel,lgm-pcie", "snps,dw-pcie";
+      device_type = "pci";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xd0e00000 0x1000>,
+            <0xd2000000 0x800000>,
+            <0xd0a41000 0x1000>;
+      reg-names = "dbi", "config", "app";
+      linux,pci-domain = <0>;
+      max-link-speed = <4>;
+      bus-range = <0x00 0x08>;
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+                      <0 0 0 2 &ioapic1 28 1>,
+                      <0 0 0 3 &ioapic1 29 1>,
+                      <0 0 0 4 &ioapic1 30 1>;
+      ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+      resets = <&rcu0 0x50 0>;
+      clocks = <&cgu0 120>;
+      phys = <&cb0phy0>;
+      phy-names = "pcie";
+      reset-assert-ms = <500>;
+      reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+      num-lanes = <2>;
+    };
diff --git a/dts/Bindings/pci/pci-thunder-ecam.txt b/dts/Bindings/pci/pci-thunder-ecam.txt
deleted file mode 100644
index f478874b79..0000000000
--- a/dts/Bindings/pci/pci-thunder-ecam.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* ThunderX PCI host controller for pass-1.x silicon
-
-Firmware-initialized PCI host controller to on-chip devices found on
-some Cavium ThunderX processors.  These devices have ECAM-based config
-access, but the BARs are all at fixed addresses.  We handle the fixed
-addresses by synthesizing Enhanced Allocation (EA) capabilities for
-these devices.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible     : Must be "cavium,pci-host-thunder-ecam"
-
-Example:
-
-	pcie@84b000000000 {
-		compatible = "cavium,pci-host-thunder-ecam";
-		device_type = "pci";
-		msi-parent = <&its>;
-		msi-map = <0 &its 0x30000 0x10000>;
-		bus-range = <0 31>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		#stream-id-cells = <1>;
-		reg = <0x84b0 0x00000000 0 0x02000000>;  /* Configuration space */
-		ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
-	};
diff --git a/dts/Bindings/pci/pci-thunder-pem.txt b/dts/Bindings/pci/pci-thunder-pem.txt
deleted file mode 100644
index f131faea3b..0000000000
--- a/dts/Bindings/pci/pci-thunder-pem.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* ThunderX PEM PCIe host controller
-
-Firmware-initialized PCI host controller found on some Cavium
-ThunderX processors.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible     : Must be "cavium,pci-host-thunder-pem"
-
-- reg            : Two entries: First the configuration space for down
-                   stream devices base address and size, as accessed
-                   from the parent bus. Second, the register bank of
-                   the PEM device PCIe bridge.
-
-Example:
-
-    pci@87e0,c2000000 {
-	compatible = "cavium,pci-host-thunder-pem";
-	device_type = "pci";
-	msi-parent = <&its>;
-	msi-map = <0 &its 0x10000 0x10000>;
-	bus-range = <0x8f 0xc7>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-
-	reg = <0x8880 0x8f000000 0x0 0x39000000>,  /* Configuration space */
-	      <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
-	ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
-		 <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
-		 <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
-		 <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
-
-	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 0 7>;
-	interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
-			<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
-			<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
-			<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
-    };
diff --git a/dts/Bindings/pci/plda,xpressrich3-axi.txt b/dts/Bindings/pci/plda,xpressrich3-axi.txt
deleted file mode 100644
index f3f75bfb42..0000000000
--- a/dts/Bindings/pci/plda,xpressrich3-axi.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-* PLDA XpressRICH3-AXI host controller
-
-The PLDA XpressRICH3-AXI host controller can be configured in a manner that
-makes it compliant with the SBSA[1] standard published by ARM Ltd. For those
-scenarios, the host-generic-pci.txt bindings apply with the following additions
-to the compatible property:
-
-Required properties:
- - compatible: should contain "plda,xpressrich3-axi" to identify the IP used.
-
-
-[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/
diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt
index ada80b01bf..981b4de128 100644
--- a/dts/Bindings/pci/qcom,pcie.txt
+++ b/dts/Bindings/pci/qcom,pcie.txt
@@ -11,6 +11,7 @@
 			- "qcom,pcie-ipq4019" for ipq4019
 			- "qcom,pcie-ipq8074" for ipq8074
 			- "qcom,pcie-qcs404" for qcs404
+			- "qcom,pcie-sdm845" for sdm845
 
 - reg:
 	Usage: required
@@ -126,6 +127,18 @@
 			- "master_bus"	AXI Master clock
 			- "slave_bus"	AXI Slave clock
 
+-clock-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"		Auxiliary clock
+			- "cfg"		Configuration clock
+			- "bus_master"	Master AXI clock
+			- "bus_slave"	Slave AXI clock
+			- "slave_q2a"	Slave Q2A clock
+			- "tbu"		PCIe TBU clock
+			- "pipe"	PIPE clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>
@@ -188,6 +201,12 @@
 			- "pwr"			PWR reset
 			- "ahb"			AHB reset
 
+- reset-names:
+	Usage: required for sdm845
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "pci"			PCIe core reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>
diff --git a/dts/Bindings/pci/versatile.txt b/dts/Bindings/pci/versatile.txt
deleted file mode 100644
index 0a702b13d2..0000000000
--- a/dts/Bindings/pci/versatile.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* ARM Versatile Platform Baseboard PCI interface
-
-PCI host controller found on the ARM Versatile PB board's FPGA.
-
-Required properties:
-- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
-  controller.
-- reg: base addresses and lengths of the PCI controller. There must be 3
-  entries:
-	- Versatile-specific registers
-	- Self Config space
-	- Config space
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- bus-range: set to <0 0xff>
-- ranges: ranges for the PCI memory and I/O regions
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties to define
-	the mapping of the PCI interface to interrupt numbers.
-
-Example:
-
-pci-controller@10001000 {
-	compatible = "arm,versatile-pci";
-	device_type = "pci";
-	reg = <0x10001000 0x1000
-	       0x41000000 0x10000
-	       0x42000000 0x100000>;
-	bus-range = <0 0xff>;
-	#address-cells = <3>;
-	#size-cells = <2>;
-	#interrupt-cells = <1>;
-
-	ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
-		  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
-		  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
-
-	interrupt-map-mask = <0x1800 0 0 7>;
-	interrupt-map = <0x1800 0 0 1 &sic 28
-			 0x1800 0 0 2 &sic 29
-			 0x1800 0 0 3 &sic 30
-			 0x1800 0 0 4 &sic 27
-
-			 0x1000 0 0 1 &sic 27
-			 0x1000 0 0 2 &sic 28
-			 0x1000 0 0 3 &sic 29
-			 0x1000 0 0 4 &sic 30
-
-			 0x0800 0 0 1 &sic 30
-			 0x0800 0 0 2 &sic 27
-			 0x0800 0 0 3 &sic 28
-			 0x0800 0 0 4 &sic 29
-
-			 0x0000 0 0 1 &sic 29
-			 0x0000 0 0 2 &sic 30
-			 0x0000 0 0 3 &sic 27
-			 0x0000 0 0 4 &sic 28>;
-};
diff --git a/dts/Bindings/pci/versatile.yaml b/dts/Bindings/pci/versatile.yaml
new file mode 100644
index 0000000000..07a48c27db
--- /dev/null
+++ b/dts/Bindings/pci/versatile.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Platform Baseboard PCI interface
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  PCI host controller found on the ARM Versatile PB board's FPGA.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-pci
+
+  reg:
+    items:
+      - description: Versatile-specific registers
+      - description: Self Config space
+      - description: Config space
+
+  ranges:
+    maxItems: 3
+
+  "#interrupt-cells": true
+
+  interrupt-map:
+    maxItems: 16
+
+  interrupt-map-mask:
+    items:
+      - const: 0x1800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+examples:
+  - |
+    pci@10001000 {
+      compatible = "arm,versatile-pci";
+      device_type = "pci";
+      reg = <0x10001000 0x1000>,
+            <0x41000000 0x10000>,
+            <0x42000000 0x100000>;
+      bus-range = <0 0xff>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      #interrupt-cells = <1>;
+
+      ranges =
+          <0x01000000 0 0x00000000 0x43000000 0 0x00010000>,  /* downstream I/O */
+          <0x02000000 0 0x50000000 0x50000000 0 0x10000000>,  /* non-prefetchable memory */
+          <0x42000000 0 0x60000000 0x60000000 0 0x10000000>;  /* prefetchable memory */
+
+      interrupt-map-mask = <0x1800 0 0 7>;
+      interrupt-map = <0x1800 0 0 1 &sic 28>,
+          <0x1800 0 0 2 &sic 29>,
+          <0x1800 0 0 3 &sic 30>,
+          <0x1800 0 0 4 &sic 27>,
+
+          <0x1000 0 0 1 &sic 27>,
+          <0x1000 0 0 2 &sic 28>,
+          <0x1000 0 0 3 &sic 29>,
+          <0x1000 0 0 4 &sic 30>,
+
+          <0x0800 0 0 1 &sic 30>,
+          <0x0800 0 0 2 &sic 27>,
+          <0x0800 0 0 3 &sic 28>,
+          <0x0800 0 0 4 &sic 29>,
+
+          <0x0000 0 0 1 &sic 29>,
+          <0x0000 0 0 2 &sic 30>,
+          <0x0000 0 0 3 &sic 27>,
+          <0x0000 0 0 4 &sic 28>;
+    };
+
+
+...
diff --git a/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
new file mode 100644
index 0000000000..020ef9e4c4
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun4i-a10-usb-phy
+      - allwinner,sun7i-a20-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    maxItems: 1
+    description: USB PHY bus clock
+
+  clock-names:
+    const: usb_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun4i-a10-ccu.h>
+    #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+    usbphy: phy@01c13400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun4i-a10-usb-phy";
+        reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+        reg-names = "phy_ctrl", "pmu1", "pmu2";
+        clocks = <&ccu CLK_USB_PHY>;
+        clock-names = "usb_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>;
+        reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+        usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+        usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+        usb0_vbus-supply = <&reg_usb0_vbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
new file mode 100644
index 0000000000..fd6e126fcf
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun50i-a64-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU1 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu1
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/reset/sun50i-a64-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun50i-a64-usb-phy";
+        reg = <0x01c19400 0x14>,
+              <0x01c1a800 0x4>,
+              <0x01c1b800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu1";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>;
+        clock-names = "usb0_phy",
+                      "usb1_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>;
+        reset-names = "usb0_reset",
+                      "usb1_reset";
+        usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
new file mode 100644
index 0000000000..7670411002
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun50i-h6-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU3 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu3
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb3_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb3_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb3_vbus-supply:
+    description: Regulator controlling USB3 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    phy@5100400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun50i-h6-usb-phy";
+        reg = <0x05100400 0x24>,
+              <0x05101800 0x4>,
+              <0x05311800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu3";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY3>;
+        clock-names = "usb0_phy",
+                      "usb3_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY3>;
+        reset-names = "usb0_reset",
+                      "usb3_reset";
+        usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+        usb0_vbus-supply = <&reg_vcc5v>;
+        usb3_vbus-supply = <&reg_vcc5v>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
new file mode 100644
index 0000000000..9b319381d1
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A13 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun5i-a13-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+
+  clocks:
+    maxItems: 1
+    description: USB OTG PHY bus clock
+
+  clock-names:
+    const: usb_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun5i-ccu.h>
+    #include <dt-bindings/reset/sun5i-ccu.h>
+
+    phy@1c13400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun5i-a13-usb-phy";
+        reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
+        reg-names = "phy_ctrl", "pmu1";
+        clocks = <&ccu CLK_USB_PHY0>;
+        clock-names = "usb_phy";
+        resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY1>;
+        reset-names = "usb0_reset", "usb1_reset";
+        usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
+        usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
+        usb0_vbus-supply = <&reg_usb0_vbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index 230d74f221..d0b541a461 100644
--- a/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/dts/Bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -15,7 +15,11 @@ properties:
     const: 0
 
   compatible:
-    const: allwinner,sun6i-a31-mipi-dphy
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-dphy
+      - items:
+          - const: allwinner,sun50i-a64-mipi-dphy
+          - const: allwinner,sun6i-a31-mipi-dphy
 
   reg:
     maxItems: 1
diff --git a/dts/Bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
new file mode 100644
index 0000000000..b0ed01bbf3
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun6i-a31-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun6i-a31-ccu.h>
+    #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun6i-a31-usb-phy";
+        reg = <0x01c19400 0x10>,
+              <0x01c1a800 0x4>,
+              <0x01c1b800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu1",
+                    "pmu2";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_PHY2>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset";
+        usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+        usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
new file mode 100644
index 0000000000..b0674406f8
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - allwinner,sun8i-a23-usb-phy
+      - allwinner,sun8i-a33-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-a23-usb-phy";
+        reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+        reg-names = "phy_ctrl", "pmu1";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>;
+        clock-names = "usb0_phy",
+                      "usb1_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>;
+        reset-names = "usb0_reset",
+                      "usb1_reset";
+        usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
new file mode 100644
index 0000000000..48dc9c834a
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-a83t-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+      - description: USB HSIC 12MHz clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+      - const: usb2_hsic_12M
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-a83t-usb-phy";
+        reg = <0x01c19400 0x10>,
+              <0x01c1a800 0x14>,
+              <0x01c1b800 0x14>;
+        reg-names = "phy_ctrl",
+                    "pmu1",
+                    "pmu2";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_HSIC>,
+                 <&ccu CLK_USB_HSIC_12M>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy",
+                      "usb2_hsic_12M";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_HSIC>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset";
+        usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+        usb0_vbus_power-supply = <&usb_power_supply>;
+        usb0_vbus-supply = <&reg_drivevbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
new file mode 100644
index 0000000000..60c3445852
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H3 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-h3-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+      - description: PHY PMU3 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu1
+      - const: pmu2
+      - const: pmu3
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+      - description: USB Host 2 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+      - const: usb3_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+      - description: USB Host 3 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+      - const: usb3_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+  usb3_vbus-supply:
+    description: Regulator controlling USB3 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-h3-usb-phy";
+        reg = <0x01c19400 0x2c>,
+              <0x01c1a800 0x4>,
+              <0x01c1b800 0x4>,
+              <0x01c1c800 0x4>,
+              <0x01c1d800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu1",
+                    "pmu2",
+                    "pmu3";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_PHY2>,
+                 <&ccu CLK_USB_PHY3>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy",
+                      "usb3_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>,
+                 <&ccu RST_USB_PHY3>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset",
+                      "usb3_reset";
+        usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+        usb0_vbus-supply = <&reg_usb0_vbus>;
+        usb1_vbus-supply = <&reg_usb1_vbus>;
+        usb2_vbus-supply = <&reg_usb2_vbus>;
+        usb3_vbus-supply = <&reg_usb3_vbus>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
new file mode 100644
index 0000000000..a2bb36790f
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-r40-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+      - description: PHY PMU1 registers
+      - description: PHY PMU2 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+      - const: pmu1
+      - const: pmu2
+
+  clocks:
+    items:
+      - description: USB OTG PHY bus clock
+      - description: USB Host 0 PHY bus clock
+      - description: USB Host 1 PHY bus clock
+
+  clock-names:
+    items:
+      - const: usb0_phy
+      - const: usb1_phy
+      - const: usb2_phy
+
+  resets:
+    items:
+      - description: USB OTG reset
+      - description: USB Host 1 Controller reset
+      - description: USB Host 2 Controller reset
+
+  reset-names:
+    items:
+      - const: usb0_reset
+      - const: usb1_reset
+      - const: usb2_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+  usb1_vbus-supply:
+    description: Regulator controlling USB1 Host controller
+
+  usb2_vbus-supply:
+    description: Regulator controlling USB2 Host controller
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-r40-ccu.h>
+    #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+    phy@1c13400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-r40-usb-phy";
+        reg = <0x01c13400 0x14>,
+              <0x01c14800 0x4>,
+              <0x01c19800 0x4>,
+              <0x01c1c800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0",
+                    "pmu1",
+                    "pmu2";
+        clocks = <&ccu CLK_USB_PHY0>,
+                 <&ccu CLK_USB_PHY1>,
+                 <&ccu CLK_USB_PHY2>;
+        clock-names = "usb0_phy",
+                      "usb1_phy",
+                      "usb2_phy";
+        resets = <&ccu RST_USB_PHY0>,
+                 <&ccu RST_USB_PHY1>,
+                 <&ccu RST_USB_PHY2>;
+        reset-names = "usb0_reset",
+                      "usb1_reset",
+                      "usb2_reset";
+        usb1_vbus-supply = <&reg_vcc5v0>;
+        usb2_vbus-supply = <&reg_vcc5v0>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
new file mode 100644
index 0000000000..eadfd0c949
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner V3s USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun8i-v3s-usb-phy
+
+  reg:
+    items:
+      - description: PHY Control registers
+      - description: PHY PMU0 registers
+
+  reg-names:
+    items:
+      - const: phy_ctrl
+      - const: pmu0
+
+  clocks:
+    maxItems: 1
+    description: USB OTG PHY bus clock
+
+  clock-names:
+    const: usb0_phy
+
+  resets:
+    maxItems: 1
+    description: USB OTG reset
+
+  reset-names:
+    const: usb0_reset
+
+  usb0_id_det-gpios:
+    description: GPIO to the USB OTG ID pin
+
+  usb0_vbus_det-gpios:
+    description: GPIO to the USB OTG VBUS detect pin
+
+  usb0_vbus_power-supply:
+    description: Power supply to detect the USB OTG VBUS
+
+  usb0_vbus-supply:
+    description: Regulator controlling USB OTG VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    phy@1c19400 {
+        #phy-cells = <1>;
+        compatible = "allwinner,sun8i-v3s-usb-phy";
+        reg = <0x01c19400 0x2c>,
+              <0x01c1a800 0x4>;
+        reg-names = "phy_ctrl",
+                    "pmu0";
+        clocks = <&ccu CLK_USB_PHY0>;
+        clock-names = "usb0_phy";
+        resets = <&ccu RST_USB_PHY0>;
+        reset-names = "usb0_reset";
+        usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/dts/Bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/dts/Bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
new file mode 100644
index 0000000000..ded7d6f0a1
--- /dev/null
+++ b/dts/Bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB PHY Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    anyOf:
+      - description: Main PHY Clock
+
+      - items:
+          - description: Main PHY clock
+          - description: HSIC 12MHz clock
+          - description: HSIC 480MHz clock
+
+  clock-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic_12M
+          - const: hsic_480M
+
+  resets:
+    anyOf:
+      - description: Normal USB PHY reset
+
+      - items:
+          - description: Normal USB PHY reset
+          - description: HSIC Reset
+
+  reset-names:
+    oneOf:
+      - const: phy
+
+      - items:
+          - const: phy
+          - const: hsic
+
+  phy_type:
+    const: hsic
+    description:
+      When absent, the PHY type will be assumed to be normal USB.
+
+  phy-supply:
+    description:
+      Regulator that powers VBUS
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+if:
+  properties:
+    phy_type:
+      const: hsic
+
+  required:
+    - phy_type
+
+then:
+  properties:
+    clocks:
+      maxItems: 3
+
+    clock-names:
+      maxItems: 3
+
+    resets:
+      maxItems: 2
+
+    reset-names:
+      maxItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy1: phy@a00800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a00800 0x4>;
+        clocks = <&usb_clocks CLK_USB0_PHY>;
+        clock-names = "phy";
+        resets = <&usb_clocks RST_USB0_PHY>;
+        reset-names = "phy";
+        phy-supply = <&reg_usb1_vbus>;
+        #phy-cells = <0>;
+    };
+
+  - |
+    #include <dt-bindings/clock/sun9i-a80-usb.h>
+    #include <dt-bindings/reset/sun9i-a80-usb.h>
+
+    usbphy3: phy@a02800 {
+        compatible = "allwinner,sun9i-a80-usb-phy";
+        reg = <0x00a02800 0x4>;
+        clocks = <&usb_clocks CLK_USB2_PHY>,
+                 <&usb_clocks CLK_USB_HSIC>,
+                 <&usb_clocks CLK_USB2_HSIC>;
+        clock-names = "phy",
+                      "hsic_12M",
+                      "hsic_480M";
+        resets = <&usb_clocks RST_USB2_PHY>,
+                 <&usb_clocks RST_USB2_HSIC>;
+        reset-names = "phy",
+                      "hsic";
+        phy_type = "hsic";
+        phy-supply = <&reg_usb3_vbus>;
+        #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/brcm,brcmstb-usb-phy.txt b/dts/Bindings/phy/brcm,brcmstb-usb-phy.txt
index 24a0d06acd..698aacbdcf 100644
--- a/dts/Bindings/phy/brcm,brcmstb-usb-phy.txt
+++ b/dts/Bindings/phy/brcm,brcmstb-usb-phy.txt
@@ -1,30 +1,49 @@
 Broadcom STB USB PHY
 
 Required properties:
- - compatible: brcm,brcmstb-usb-phy
- - reg: two offset and length pairs.
-	The first pair specifies a manditory set of memory mapped
-	registers used for general control of the PHY.
-	The second pair specifies optional registers used by some of
-	the SoCs that support USB 3.x
- - #phy-cells: Shall be 1 as it expects one argument for setting
-	       the type of the PHY. Possible values are:
-	       - PHY_TYPE_USB2 for USB1.1/2.0 PHY
-	       - PHY_TYPE_USB3 for USB3.x PHY
+- compatible: should be one of
+	"brcm,brcmstb-usb-phy"
+	"brcm,bcm7216-usb-phy"
+	"brcm,bcm7211-usb-phy"
+
+- reg and reg-names properties requirements are specific to the
+  compatible string.
+  "brcm,brcmstb-usb-phy":
+    - reg: 1 or 2 offset and length pairs. One for the base CTRL registers
+           and an optional pair for systems with USB 3.x support
+    - reg-names: not specified
+  "brcm,bcm7216-usb-phy":
+    - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
+           registers
+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl"
+  "brcm,bcm7211-usb-phy":
+    - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
+           USB_PHY and USB_MDIO registers and an optional pair
+	   for the BDC registers
+    - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
+
+- #phy-cells: Shall be 1 as it expects one argument for setting
+	      the type of the PHY. Possible values are:
+	      - PHY_TYPE_USB2 for USB1.1/2.0 PHY
+	      - PHY_TYPE_USB3 for USB3.x PHY
 
 Optional Properties:
 - clocks : clock phandles.
 - clock-names: String, clock name.
+- interrupts: wakeup interrupt
+- interrupt-names: "wakeup"
 - brcm,ipp: Boolean, Invert Port Power.
   Possible values are: 0 (Don't invert), 1 (Invert)
 - brcm,ioc: Boolean, Invert Over Current detection.
   Possible values are: 0 (Don't invert), 1 (Invert)
-NOTE: one or both of the following two properties must be set
-- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
-- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
 - dr_mode: String, PHY Device mode.
   Possible values are: "host", "peripheral ", "drd" or "typec-pd"
   If this property is not defined, the phy will default to "host" mode.
+- brcm,syscon-piarbctl: phandle to syscon for handling config registers
+NOTE: one or both of the following two properties must be set
+- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
+- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
+
 
 Example:
 
@@ -41,3 +60,27 @@ usbphy_0: usb-phy@f0470200 {
 	clocks = <&usb20>, <&usb30>;
 	clock-names = "sw_usb", "sw_usb3";
 };
+
+usb-phy@29f0200 {
+	reg = <0x29f0200 0x200>,
+		<0x29c0880 0x30>,
+		<0x29cc100 0x534>,
+		<0x2808000 0x24>,
+		<0x2980080 0x8>;
+	reg-names = "ctrl",
+		"xhci_ec",
+		"xhci_gbl",
+		"usb_phy",
+		"usb_mdio";
+	brcm,ioc = <0x0>;
+	brcm,ipp = <0x0>;
+	compatible = "brcm,bcm7211-usb-phy";
+	interrupts = <0x30>;
+	interrupt-parent = <&vpu_intr1_nosec_intc>;
+	interrupt-names = "wake";
+	#phy-cells = <0x1>;
+	brcm,has-xhci;
+	syscon-piarbctl = <&syscon_piarbctl>;
+	clocks = <&scmi_clk 256>;
+	clock-names = "sw_usb";
+};
diff --git a/dts/Bindings/phy/brcm-sata-phy.txt b/dts/Bindings/phy/brcm-sata-phy.txt
index b640845fec..c03ad21984 100644
--- a/dts/Bindings/phy/brcm-sata-phy.txt
+++ b/dts/Bindings/phy/brcm-sata-phy.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible: should be one or more of
+     "brcm,bcm7216-sata-phy"
      "brcm,bcm7425-sata-phy"
      "brcm,bcm7445-sata-phy"
      "brcm,iproc-ns2-sata-phy"
diff --git a/dts/Bindings/phy/intel,lgm-emmc-phy.yaml b/dts/Bindings/phy/intel,lgm-emmc-phy.yaml
new file mode 100644
index 0000000000..0ccee64c69
--- /dev/null
+++ b/dts/Bindings/phy/intel,lgm-emmc-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+description: |+
+  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
+  node is used to reference the base address of eMMC phy registers.
+
+  The eMMC PHY node should be the child of a syscon node with the
+  required property:
+
+  - compatible:         Should be one of the following:
+                        "intel,lgm-syscon", "syscon"
+  - reg:
+      maxItems: 1
+
+properties:
+  compatible:
+      const: intel,lgm-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    sysconf: chiptop@e0200000 {
+      compatible = "intel,lgm-syscon", "syscon";
+      reg = <0xe0200000 0x100>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      emmc_phy: emmc-phy@a8 {
+        compatible = "intel,lgm-emmc-phy";
+        reg = <0x00a8 0x10>;
+        clocks = <&emmc>;
+        #phy-cells = <0>;
+      };
+    };
+...
diff --git a/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml b/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml
new file mode 100644
index 0000000000..5ab436189f
--- /dev/null
+++ b/dts/Bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: marvell,mmp3-hsic-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to reset
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - "#phy-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    hsic-phy@f0001800 {
+            compatible = "marvell,mmp3-hsic-phy";
+            reg = <0xf0001800 0x40>;
+            reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+            #phy-cells = <0>;
+    };
diff --git a/dts/Bindings/phy/phy-cadence-sierra.txt b/dts/Bindings/phy/phy-cadence-sierra.txt
index 6e1b47bfce..03f5939d3d 100644
--- a/dts/Bindings/phy/phy-cadence-sierra.txt
+++ b/dts/Bindings/phy/phy-cadence-sierra.txt
@@ -2,21 +2,24 @@ Cadence Sierra PHY
 -----------------------
 
 Required properties:
-- compatible:	cdns,sierra-phy-t0
-- clocks:	Must contain an entry in clock-names.
-		See ../clocks/clock-bindings.txt for details.
-- clock-names:	Must be "phy_clk"
+- compatible:	Must be "cdns,sierra-phy-t0" for Sierra in Cadence platform
+		Must be "ti,sierra-phy-t0" for Sierra in TI's J721E SoC.
 - resets:	Must contain an entry for each in reset-names.
 		See ../reset/reset.txt for details.
 - reset-names:	Must include "sierra_reset" and "sierra_apb".
 		"sierra_reset" must control the reset line to the PHY.
 		"sierra_apb" must control the reset line to the APB PHY
-		interface.
+		interface ("sierra_apb" is optional).
 - reg:		register range for the PHY.
 - #address-cells: Must be 1
 - #size-cells:	Must be 0
 
 Optional properties:
+- clocks:		Must contain an entry in clock-names.
+			See ../clocks/clock-bindings.txt for details.
+- clock-names:		Must contain "cmn_refclk_dig_div" and
+			"cmn_refclk1_dig_div" for configuring the frequency of
+			the clock to the lanes. "phy_clk" is deprecated.
 - cdns,autoconf:	A boolean property whose presence indicates that the
 			PHY registers will be configured by hardware. If not
 			present, all sub-node optional properties must be
diff --git a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml
index bb0da87bcd..72aca81e89 100644
--- a/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml
+++ b/dts/Bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -13,9 +13,6 @@ properties:
   "#phy-cells":
     const: 0
 
-  "#clock-cells":
-    const: 0
-
   compatible:
     enum:
       - rockchip,px30-dsi-dphy
@@ -49,7 +46,6 @@ properties:
 
 required:
   - "#phy-cells"
-  - "#clock-cells"
   - compatible
   - reg
   - clocks
@@ -62,11 +58,10 @@ additionalProperties: false
 examples:
   - |
     dsi_dphy: phy@ff2e0000 {
-        compatible = "rockchip,px30-video-phy";
+        compatible = "rockchip,px30-dsi-dphy";
         reg = <0x0 0xff2e0000 0x0 0x10000>;
         clocks = <&pmucru 13>, <&cru 12>;
         clock-names = "ref", "pclk";
-        #clock-cells = <0>;
         resets = <&cru 12>;
         reset-names = "apb";
         #phy-cells = <0>;
diff --git a/dts/Bindings/phy/samsung-phy.txt b/dts/Bindings/phy/samsung-phy.txt
index 1c40ccd40c..7510830a79 100644
--- a/dts/Bindings/phy/samsung-phy.txt
+++ b/dts/Bindings/phy/samsung-phy.txt
@@ -1,4 +1,4 @@
-Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
+Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY
 -------------------------------------------------
 
 Required properties:
@@ -27,7 +27,7 @@ the PHY specifier identifies the PHY and its meaning is as follows:
 supports additional fifth PHY:
   4 - MIPI CSIS 2.
 
-Samsung EXYNOS SoC series Display Port PHY
+Samsung Exynos SoC series Display Port PHY
 -------------------------------------------------
 
 Required properties:
@@ -38,7 +38,7 @@ Required properties:
 		      control pmu registers for power isolation.
 - #phy-cells : from the generic PHY bindings, must be 0;
 
-Samsung S5P/EXYNOS SoC series USB PHY
+Samsung S5P/Exynos SoC series USB PHY
 -------------------------------------------------
 
 Required properties:
diff --git a/dts/Bindings/phy/sun4i-usb-phy.txt b/dts/Bindings/phy/sun4i-usb-phy.txt
deleted file mode 100644
index f2e120af17..0000000000
--- a/dts/Bindings/phy/sun4i-usb-phy.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Allwinner sun4i USB PHY
------------------------
-
-Required properties:
-- compatible : should be one of
-  * allwinner,sun4i-a10-usb-phy
-  * allwinner,sun5i-a13-usb-phy
-  * allwinner,sun6i-a31-usb-phy
-  * allwinner,sun7i-a20-usb-phy
-  * allwinner,sun8i-a23-usb-phy
-  * allwinner,sun8i-a33-usb-phy
-  * allwinner,sun8i-a83t-usb-phy
-  * allwinner,sun8i-h3-usb-phy
-  * allwinner,sun8i-r40-usb-phy
-  * allwinner,sun8i-v3s-usb-phy
-  * allwinner,sun50i-a64-usb-phy
-  * allwinner,sun50i-h6-usb-phy
-- reg : a list of offset + length pairs
-- reg-names :
-  * "phy_ctrl"
-  * "pmu0" for H3, V3s, A64 or H6
-  * "pmu1"
-  * "pmu2" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
-  * "pmu3" for sun8i-h3 or sun50i-h6
-- #phy-cells : from the generic phy bindings, must be 1
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names :
-  * "usb_phy" for sun4i, sun5i or sun7i
-  * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
-  * "usb0_phy", "usb1_phy" for sun8i
-  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb2_hsic_12M" for sun8i-a83t
-  * "usb0_phy", "usb1_phy", "usb2_phy" and "usb3_phy" for sun8i-h3
-  * "usb0_phy" and "usb3_phy" for sun50i-h6
-- resets : a list of phandle + reset specifier pairs
-- reset-names :
-  * "usb0_reset"
-  * "usb1_reset"
-  * "usb2_reset" for sun4i, sun6i, sun7i, sun8i-a83t or sun8i-h3
-  * "usb3_reset" for sun8i-h3 and sun50i-h6
-
-Optional properties:
-- usb0_id_det-gpios : gpio phandle for reading the otg id pin value
-- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus
-- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect
-- usb0_vbus-supply : regulator phandle for controller usb0 vbus
-- usb1_vbus-supply : regulator phandle for controller usb1 vbus
-- usb2_vbus-supply : regulator phandle for controller usb2 vbus
-- usb3_vbus-supply : regulator phandle for controller usb3 vbus
-
-Example:
-	usbphy: phy@01c13400 {
-		#phy-cells = <1>;
-		compatible = "allwinner,sun4i-a10-usb-phy";
-		/* phy base regs, phy1 pmu reg, phy2 pmu reg */
-		reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-		reg-names = "phy_ctrl", "pmu1", "pmu2";
-		clocks = <&usb_clk 8>;
-		clock-names = "usb_phy";
-		resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
-		reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-		usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
-		usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-		usb0_vbus-supply = <&reg_usb0_vbus>;
-		usb1_vbus-supply = <&reg_usb1_vbus>;
-		usb2_vbus-supply = <&reg_usb2_vbus>;
-	};
diff --git a/dts/Bindings/phy/sun9i-usb-phy.txt b/dts/Bindings/phy/sun9i-usb-phy.txt
deleted file mode 100644
index 64f7109aea..0000000000
--- a/dts/Bindings/phy/sun9i-usb-phy.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Allwinner sun9i USB PHY
------------------------
-
-Required properties:
-- compatible : should be one of
-  * allwinner,sun9i-a80-usb-phy
-- reg : a list of offset + length pairs
-- #phy-cells : from the generic phy bindings, must be 0
-- phy_type : "hsic" for HSIC usage;
-	     other values or absence of this property indicates normal USB
-- clocks : phandle + clock specifier for the phy clocks
-- clock-names : depending on the "phy_type" property,
-  * "phy" for normal USB
-  * "hsic_480M", "hsic_12M" for HSIC
-- resets : a list of phandle + reset specifier pairs
-- reset-names : depending on the "phy_type" property,
-  * "phy" for normal USB
-  * "hsic" for HSIC
-
-Optional Properties:
-- phy-supply : from the generic phy bindings, a phandle to a regulator that
-	       provides power to VBUS.
-
-It is recommended to list all clocks and resets available.
-The driver will only use those matching the phy_type.
-
-Example:
-	usbphy1: phy@a01800 {
-		compatible = "allwinner,sun9i-a80-usb-phy";
-		reg = <0x00a01800 0x4>;
-		clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
-		       <&usb_phy_clk 3>;
-		clock-names = "hsic_480M", "hsic_12M", "phy";
-		resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
-		reset-names = "hsic", "phy";
-		#phy-cells = <0>;
-	};
diff --git a/dts/Bindings/phy/ti,phy-j721e-wiz.yaml b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml
new file mode 100644
index 0000000000..452cee1aed
--- /dev/null
+++ b/dts/Bindings/phy/ti,phy-j721e-wiz.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E WIZ (SERDES Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-wiz-16g
+      - ti,j721e-wiz-10g
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+    description: clock-specifier to represent input to the WIZ
+
+  clock-names:
+    items:
+      - const: fck
+      - const: core_ref_clk
+      - const: ext_ref_clk
+
+  num-lanes:
+    minimum: 1
+    maximum: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  ranges: true
+
+  assigned-clocks:
+    maxItems: 2
+
+  assigned-clock-parents:
+    maxItems: 2
+
+  typec-dir-gpios:
+    maxItems: 1
+    description:
+      GPIO to signal Type-C cable orientation for lane swap.
+      If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
+      achieve the funtionality of an external type-C plug flip mux.
+
+  typec-dir-debounce-ms:
+    minimum: 100
+    maximum: 1000
+    default: 100
+    description:
+      Number of milliseconds to wait before sampling typec-dir-gpio.
+      If not specified, the default debounce of 100ms will be used.
+      Type-C spec states minimum CC pin debounce of 100 ms and maximum
+      of 200 ms. However, some solutions might need more than 200 ms.
+
+patternProperties:
+  "^pll[0|1]-refclk$":
+    type: object
+    description: |
+      WIZ node should have subnodes for each of the PLLs present in
+      the SERDES.
+    properties:
+      clocks:
+        maxItems: 2
+        description: Phandle to clock nodes representing the two inputs to PLL.
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  "^cmn-refclk1?-dig-div$":
+    type: object
+    description:
+      WIZ node should have subnodes for each of the PMA common refclock
+      provided by the SERDES.
+    properties:
+      clocks:
+        maxItems: 1
+        description: Phandle to the clock node representing the input to the
+          divider clock.
+
+      "#clock-cells":
+        const: 0
+
+    required:
+      - clocks
+      - "#clock-cells"
+
+  "^refclk-dig$":
+    type: object
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    properties:
+      clocks:
+        maxItems: 4
+        description: Phandle to four clock nodes representing the inputs to
+          refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  "^serdes@[0-9a-f]+$":
+    type: object
+    description: |
+      WIZ node should have '1' subnode for the SERDES. It could be either
+      Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
+      bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
+      Torrent SERDES should follow the bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+
+required:
+  - compatible
+  - power-domains
+  - clocks
+  - clock-names
+  - num-lanes
+  - "#address-cells"
+  - "#size-cells"
+  - "#reset-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    wiz@5000000 {
+           compatible = "ti,j721e-wiz-16g";
+           #address-cells = <1>;
+           #size-cells = <1>;
+           power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+           clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+           assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+           assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+           num-lanes = <2>;
+           #reset-cells = <1>;
+           ranges = <0x5000000 0x5000000 0x10000>;
+
+           pll0-refclk {
+                  clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll0_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 13>;
+           };
+
+           pll1-refclk {
+                  clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll1_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 0>;
+           };
+
+           cmn-refclk-dig-div {
+                  clocks = <&wiz1_refclk_dig>;
+                  #clock-cells = <0>;
+           };
+
+           cmn-refclk1-dig-div {
+                  clocks = <&wiz1_pll1_refclk>;
+                  #clock-cells = <0>;
+           };
+
+           refclk-dig {
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz0_refclk_dig>;
+                  assigned-clock-parents = <&k3_clks 292 11>;
+           };
+
+           serdes@5000000 {
+                  compatible = "cdns,ti,sierra-phy-t0";
+                  reg-names = "serdes";
+                  reg = <0x5000000 0x10000>;
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  resets = <&serdes_wiz0 0>;
+                  reset-names = "sierra_reset";
+                  clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+                  clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+           };
+    };
diff --git a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 39ad8657d0..bb690e20c3 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -22,6 +22,9 @@ description: |+
 properties:
   compatible:
     const: aspeed,ast2400-pinctrl
+  reg:
+    description: |
+      A hint for the memory regions associated with the pin-controller
 
 patternProperties:
   '^.*$':
diff --git a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 3c6405be07..f7f5d57f2c 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -23,6 +23,9 @@ description: |+
 properties:
   compatible:
     const: aspeed,ast2500-pinctrl
+  reg:
+    description: |
+      A hint for the memory regions associated with the pin-controller
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2
diff --git a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 064b7dfc42..3749fa233e 100644
--- a/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/dts/Bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -54,8 +54,9 @@ patternProperties:
               TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
               TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
               THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
-              UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
-              WDTRST3, WDTRST4, ]
+              UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+              USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
+              WDTRST4, ]
         groups:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
@@ -85,8 +86,8 @@ patternProperties:
               TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
               TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
               THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
-              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
-              VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
+              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, USBA,
+              USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
 
 required:
   - compatible
diff --git a/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
new file mode 100644
index 0000000000..2e31e12039
--- /dev/null
+++ b/dts/Bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8MP IOMUX Controller
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mp-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart2: uart2grp {
+            fsl,pins = <
+                0x228 0x488 0x5F0 0x0 0x6	0x49
+                0x228 0x488 0x000 0x0 0x0	0x49
+            >;
+        };
+    };
+
+...
diff --git a/dts/Bindings/pinctrl/ingenic,pinctrl.txt b/dts/Bindings/pinctrl/ingenic,pinctrl.txt
index 0014d98997..d9b2100c98 100644
--- a/dts/Bindings/pinctrl/ingenic,pinctrl.txt
+++ b/dts/Bindings/pinctrl/ingenic,pinctrl.txt
@@ -10,9 +10,9 @@ GPIO port configuration registers and it is typical to refer to pins using the
 naming scheme "PxN" where x is a character identifying the GPIO port with
 which the pin is associated and N is an integer from 0 to 31 identifying the
 pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and
-PB31 is the last pin in GPIO port B. The jz4740 and the x1000 contains 4 GPIO
-ports, PA to PD, for a total of 128 pins. The jz4760, the jz4770 and the jz4780
-contains 6 GPIO ports, PA to PF, for a total of 192 pins.
+PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830
+contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the
+jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins.
 
 
 Required properties:
@@ -28,6 +28,7 @@ Required properties:
     - "ingenic,x1000-pinctrl"
     - "ingenic,x1000e-pinctrl"
     - "ingenic,x1500-pinctrl"
+    - "ingenic,x1830-pinctrl"
  - reg: Address range of the pinctrl registers.
 
 
@@ -40,6 +41,7 @@ Required properties for sub-nodes (GPIO chips):
     - "ingenic,jz4770-gpio"
     - "ingenic,jz4780-gpio"
     - "ingenic,x1000-gpio"
+    - "ingenic,x1830-gpio"
  - reg: The GPIO bank number.
  - interrupt-controller: Marks the device node as an interrupt controller.
  - interrupts: Interrupt specifier for the controllers interrupt.
diff --git a/dts/Bindings/pinctrl/intel,lgm-io.yaml b/dts/Bindings/pinctrl/intel,lgm-io.yaml
new file mode 100644
index 0000000000..cd2b436350
--- /dev/null
+++ b/dts/Bindings/pinctrl/intel,lgm-io.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
+
+maintainers:
+  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+  Pinmux & GPIO controller controls pin multiplexing & configuration including
+  GPIO function selection & GPIO attributes configuration.
+
+properties:
+  compatible:
+    const: intel,lgm-io
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      function: true
+      groups: true
+      pins: true
+      pinmux: true
+      bias-pull-up: true
+      bias-pull-down: true
+      drive-strength: true
+      slew-rate: true
+      drive-open-drain: true
+      output-enable: true
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl: pinctrl@e2880000 {
+        compatible = "intel,lgm-io";
+        reg = <0xe2880000 0x100000>;
+
+        uart0-pins {
+             pins = <64>, /* UART_RX0 */
+                    <65>; /* UART_TX0 */
+             function = "CONSOLE_UART0";
+             pinmux = <1>,
+                      <1>;
+             groups = "CONSOLE_UART0";
+          };
+    };
+
+...
diff --git a/dts/Bindings/pinctrl/intel,lgm-pinctrl.yaml b/dts/Bindings/pinctrl/intel,lgm-pinctrl.yaml
deleted file mode 100644
index 240d429f77..0000000000
--- a/dts/Bindings/pinctrl/intel,lgm-pinctrl.yaml
+++ /dev/null
@@ -1,116 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bindings/pinctrl/intel,lgm-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
-
-maintainers:
-  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
-
-description: |
-  Pinmux & GPIO controller controls pin multiplexing & configuration including
-  GPIO function selection & GPIO attributes configuration.
-
-  Please refer to [1] for details of the common pinctrl bindings used by the
-  client devices.
-
-  [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-properties:
-  compatible:
-    const: intel,lgm-io
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  '-pins$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      function:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          A string containing the name of the function to mux to the group.
-
-      groups:
-        $ref: /schemas/types.yaml#/definitions/string-array
-        description:
-          An array of strings identifying the list of groups.
-
-      pins:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        description:
-          List of pins to select with this function.
-
-      pinmux:
-        description: The applicable mux group.
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32-array"
-
-      bias-pull-up:
-        type: boolean
-
-      bias-pull-down:
-        type: boolean
-
-      drive-strength:
-        description: |
-          Selects the drive strength for the specified pins in mA.
-          0: 2 mA
-          1: 4 mA
-          2: 8 mA
-          3: 12 mA
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-
-      slew-rate:
-        type: boolean
-        description: |
-          Sets slew rate for specified pins.
-          0: slow slew
-          1: fast slew
-
-      drive-open-drain:
-        type: boolean
-
-      output-enable:
-        type: boolean
-
-    required:
-      - function
-      - groups
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    pinctrl: pinctrl@e2880000 {
-        compatible = "intel,lgm-pinctrl";
-        reg = <0xe2880000 0x100000>;
-
-        uart0-pins {
-             pins = <64>, /* UART_RX0 */
-                    <65>; /* UART_TX0 */
-             function = "CONSOLE_UART0";
-             pinmux = <1>,
-                      <1>;
-             groups = "CONSOLE_UART0";
-          };
-    };
-
-...
diff --git a/dts/Bindings/pinctrl/pinmux-node.yaml b/dts/Bindings/pinctrl/pinmux-node.yaml
index 777623a57f..732d907556 100644
--- a/dts/Bindings/pinctrl/pinmux-node.yaml
+++ b/dts/Bindings/pinctrl/pinmux-node.yaml
@@ -114,7 +114,7 @@ properties:
       specific binding for the hardware defines whether the entries are integers
       or strings, and their meaning.
 
-  group:
+  groups:
     $ref: /schemas/types.yaml#/definitions/string-array
     description:
       the group to apply the properties to, if the driver supports
diff --git a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt
index b5767ee82e..6ffeac9801 100644
--- a/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt
+++ b/dts/Bindings/pinctrl/qcom,sc7180-pinctrl.txt
@@ -125,8 +125,9 @@ to specify in a pin configuration subnode:
 		    mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag,
 		    PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss,
 		    qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs,
-		    qspi_data, qup00, qup01, qup02, qup03, qup04, qup05,
-		    qup10, qup11, qup12, qup13, qup14, qup15, sdc1_tb,
+		    qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03,
+		    qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart,
+		    qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb,
 		    sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2,
 		    tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt,
 		    usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT,
diff --git a/dts/Bindings/power/avs/qcom,cpr.txt b/dts/Bindings/power/avs/qcom,cpr.txt
new file mode 100644
index 0000000000..ab0d5ebbad
--- /dev/null
+++ b/dts/Bindings/power/avs/qcom,cpr.txt
@@ -0,0 +1,130 @@
+QCOM CPR (Core Power Reduction)
+
+CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+or other device. Each OPP of a device corresponds to a "corner" that has
+a range of valid voltages for a particular frequency. While the device is
+running at a particular frequency, CPR monitors dynamic factors such as
+temperature, etc. and suggests adjustments to the voltage to save power
+and meet silicon characteristic requirements.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address and size of the rbcpr register region
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the CPR interrupt
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: phandle to the reference clock
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "ref"
+
+- vdd-apc-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: phandle to the vdd-apc-supply regulator
+
+- #power-domain-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: should be 0
+
+- operating-points-v2:
+	Usage: required
+	Value type: <phandle>
+	Definition: A phandle to the OPP table containing the
+		    performance states supported by the CPR
+		    power domain
+
+- acc-syscon:
+	Usage: optional
+	Value type: <phandle>
+	Definition: phandle to syscon for writing ACC settings
+
+- nvmem-cells:
+	Usage: required
+	Value type: <phandle>
+	Definition: phandle to nvmem cells containing the data
+		    that makes up a fuse corner, for each fuse corner.
+		    As well as the CPR fuse revision.
+
+- nvmem-cell-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
+		    "cpr_quotient_offset3", "cpr_init_voltage1",
+		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
+		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
+		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
+		    for qcs404.
+
+Example:
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
+	power-controller@b018000 {
+		compatible = "qcom,qcs404-cpr", "qcom,cpr";
+		reg = <0x0b018000 0x1000>;
+		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&xo_board>;
+		clock-names = "ref";
+		vdd-apc-supply = <&pms405_s3>;
+		#power-domain-cells = <0>;
+		operating-points-v2 = <&cpr_opp_table>;
+		acc-syscon = <&tcsr>;
+
+		nvmem-cells = <&cpr_efuse_quot_offset1>,
+			<&cpr_efuse_quot_offset2>,
+			<&cpr_efuse_quot_offset3>,
+			<&cpr_efuse_init_voltage1>,
+			<&cpr_efuse_init_voltage2>,
+			<&cpr_efuse_init_voltage3>,
+			<&cpr_efuse_quot1>,
+			<&cpr_efuse_quot2>,
+			<&cpr_efuse_quot3>,
+			<&cpr_efuse_ring1>,
+			<&cpr_efuse_ring2>,
+			<&cpr_efuse_ring3>,
+			<&cpr_efuse_revision>;
+		nvmem-cell-names = "cpr_quotient_offset1",
+			"cpr_quotient_offset2",
+			"cpr_quotient_offset3",
+			"cpr_init_voltage1",
+			"cpr_init_voltage2",
+			"cpr_init_voltage3",
+			"cpr_quotient1",
+			"cpr_quotient2",
+			"cpr_quotient3",
+			"cpr_ring_osc1",
+			"cpr_ring_osc2",
+			"cpr_ring_osc3",
+			"cpr_fuse_revision";
+	};
diff --git a/dts/Bindings/power/qcom,rpmpd.txt b/dts/Bindings/power/qcom,rpmpd.txt
deleted file mode 100644
index bc75bf49cd..0000000000
--- a/dts/Bindings/power/qcom,rpmpd.txt
+++ /dev/null
@@ -1,148 +0,0 @@
-Qualcomm RPM/RPMh Power domains
-
-For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
-which then translates it into a corresponding voltage on a rail
-
-Required Properties:
- - compatible: Should be one of the following
-	* qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC
-	* qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
-	* qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC
-	* qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC
-	* qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
- - #power-domain-cells: number of cells in Power domain specifier
-	must be 1.
- - operating-points-v2: Phandle to the OPP table for the Power domain.
-	Refer to Documentation/devicetree/bindings/power/power_domain.txt
-	and Documentation/devicetree/bindings/opp/opp.txt for more details
-
-Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
-various OPPs for different platforms as well as Power domain indexes
-
-Example: rpmh power domain controller and OPP table
-
-#include <dt-bindings/power/qcom-rpmhpd.h>
-
-opp-level values specified in the OPP tables for RPMh power domains
-should use the RPMH_REGULATOR_LEVEL_* constants from
-<dt-bindings/power/qcom-rpmhpd.h>
-
-	rpmhpd: power-controller {
-		compatible = "qcom,sdm845-rpmhpd";
-		#power-domain-cells = <1>;
-		operating-points-v2 = <&rpmhpd_opp_table>;
-
-		rpmhpd_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			rpmhpd_opp_ret: opp1 {
-				opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-			};
-
-			rpmhpd_opp_min_svs: opp2 {
-				opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-			};
-
-			rpmhpd_opp_low_svs: opp3 {
-				opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-			};
-
-			rpmhpd_opp_svs: opp4 {
-				opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-			};
-
-			rpmhpd_opp_svs_l1: opp5 {
-				opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-			};
-
-			rpmhpd_opp_nom: opp6 {
-				opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-			};
-
-			rpmhpd_opp_nom_l1: opp7 {
-				opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-			};
-
-			rpmhpd_opp_nom_l2: opp8 {
-				opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-			};
-
-			rpmhpd_opp_turbo: opp9 {
-				opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-			};
-
-			rpmhpd_opp_turbo_l1: opp10 {
-				opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-			};
-		};
-	};
-
-Example: rpm power domain controller and OPP table
-
-	rpmpd: power-controller {
-		compatible = "qcom,msm8996-rpmpd";
-		#power-domain-cells = <1>;
-		operating-points-v2 = <&rpmpd_opp_table>;
-
-		rpmpd_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			rpmpd_opp_low: opp1 {
-				opp-level = <1>;
-			};
-
-			rpmpd_opp_ret: opp2 {
-				opp-level = <2>;
-			};
-
-			rpmpd_opp_svs: opp3 {
-				opp-level = <3>;
-			};
-
-			rpmpd_opp_normal: opp4 {
-				opp-level = <4>;
-			};
-
-			rpmpd_opp_high: opp5 {
-				opp-level = <5>;
-			};
-
-			rpmpd_opp_turbo: opp6 {
-				opp-level = <6>;
-			};
-		};
-	};
-
-Example: Client/Consumer device using OPP table
-
-	leaky-device0@12350000 {
-		compatible = "foo,i-leak-current";
-		reg = <0x12350000 0x1000>;
-		power-domains = <&rpmhpd SDM845_MX>;
-		operating-points-v2 = <&leaky_opp_table>;
-	};
-
-
-	leaky_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp1 {
-			opp-hz = /bits/ 64 <144000>;
-			required-opps = <&rpmhpd_opp_low>;
-		};
-
-		opp2 {
-			opp-hz = /bits/ 64 <400000>;
-			required-opps = <&rpmhpd_opp_ret>;
-		};
-
-		opp3 {
-			opp-hz = /bits/ 64 <20000000>;
-			required-opps = <&rpmpd_opp_svs>;
-		};
-
-		opp4 {
-			opp-hz = /bits/ 64 <25000000>;
-			required-opps = <&rpmpd_opp_normal>;
-		};
-	};
diff --git a/dts/Bindings/power/qcom,rpmpd.yaml b/dts/Bindings/power/qcom,rpmpd.yaml
new file mode 100644
index 0000000000..ba605310ab
--- /dev/null
+++ b/dts/Bindings/power/qcom,rpmpd.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/qcom,rpmpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM/RPMh Power domains
+
+maintainers:
+  - Rajendra Nayak <rnayak@codeaurora.org>
+
+description:
+  For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
+  which then translates it into a corresponding voltage on a rail.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8976-rpmpd
+      - qcom,msm8996-rpmpd
+      - qcom,msm8998-rpmpd
+      - qcom,qcs404-rpmpd
+      - qcom,sc7180-rpmhpd
+      - qcom,sdm845-rpmhpd
+      - qcom,sm8150-rpmhpd
+
+  '#power-domain-cells':
+    const: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+required:
+  - compatible
+  - '#power-domain-cells'
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+
+    // Example 1 (rpmh power domain controller and OPP table):
+
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rpmhpd: power-controller {
+      compatible = "qcom,sdm845-rpmhpd";
+      #power-domain-cells = <1>;
+      operating-points-v2 = <&rpmhpd_opp_table>;
+
+      rpmhpd_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        rpmhpd_opp_ret: opp1 {
+          opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+        };
+
+        rpmhpd_opp_min_svs: opp2 {
+          opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+        };
+
+        rpmhpd_opp_low_svs: opp3 {
+          opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+        };
+
+        rpmhpd_opp_svs: opp4 {
+          opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+        };
+
+        rpmhpd_opp_svs_l1: opp5 {
+          opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+        };
+
+        rpmhpd_opp_nom: opp6 {
+          opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+        };
+
+        rpmhpd_opp_nom_l1: opp7 {
+          opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+        };
+
+        rpmhpd_opp_nom_l2: opp8 {
+          opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+        };
+
+        rpmhpd_opp_turbo: opp9 {
+          opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+        };
+
+        rpmhpd_opp_turbo_l1: opp10 {
+          opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+        };
+      };
+    };
+
+  - |
+
+    // Example 2 (rpm power domain controller and OPP table):
+
+    rpmpd: power-controller {
+      compatible = "qcom,msm8996-rpmpd";
+      #power-domain-cells = <1>;
+      operating-points-v2 = <&rpmpd_opp_table>;
+
+      rpmpd_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        rpmpd_opp_low: opp1 {
+          opp-level = <1>;
+        };
+
+        rpmpd_opp_ret: opp2 {
+          opp-level = <2>;
+        };
+
+        rpmpd_opp_svs: opp3 {
+          opp-level = <3>;
+        };
+
+        rpmpd_opp_normal: opp4 {
+          opp-level = <4>;
+        };
+
+        rpmpd_opp_high: opp5 {
+          opp-level = <5>;
+        };
+
+        rpmpd_opp_turbo: opp6 {
+          opp-level = <6>;
+        };
+      };
+    };
+
+  - |
+
+    // Example 3 (Client/Consumer device using OPP table):
+
+    leaky-device0@12350000 {
+      compatible = "foo,i-leak-current";
+      reg = <0x12350000 0x1000>;
+      power-domains = <&rpmhpd 0>;
+      operating-points-v2 = <&leaky_opp_table>;
+    };
+
+    leaky_opp_table: opp-table {
+      compatible = "operating-points-v2";
+      opp1 {
+        opp-hz = /bits/ 64 <144000>;
+        required-opps = <&rpmhpd_opp_low>;
+      };
+
+      opp2 {
+        opp-hz = /bits/ 64 <400000>;
+        required-opps = <&rpmhpd_opp_ret>;
+      };
+
+      opp3 {
+        opp-hz = /bits/ 64 <20000000>;
+        required-opps = <&rpmpd_opp_svs>;
+      };
+
+      opp4 {
+        opp-hz = /bits/ 64 <25000000>;
+        required-opps = <&rpmpd_opp_normal>;
+      };
+    };
+...
diff --git a/dts/Bindings/power/reset/xlnx,zynqmp-power.txt b/dts/Bindings/power/reset/xlnx,zynqmp-power.txt
index d366f1eb62..bb529ecf8a 100644
--- a/dts/Bindings/power/reset/xlnx,zynqmp-power.txt
+++ b/dts/Bindings/power/reset/xlnx,zynqmp-power.txt
@@ -8,9 +8,41 @@ Required properties:
  - compatible:		Must contain:	"xlnx,zynqmp-power"
  - interrupts:		Interrupt specifier
 
--------
-Example
--------
+Optional properties:
+ - mbox-names	: Name given to channels seen in the 'mboxes' property.
+		  "tx" - Mailbox corresponding to transmit path
+		  "rx" - Mailbox corresponding to receive path
+ - mboxes	: Standard property to specify a Mailbox. Each value of
+		  the mboxes property should contain a phandle to the
+		  mailbox controller device node and an args specifier
+		  that will be the phandle to the intended sub-mailbox
+		  child node to be used for communication. See
+		  Documentation/devicetree/bindings/mailbox/mailbox.txt
+		  for more details about the generic mailbox controller
+		  and client driver bindings. Also see
+		  Documentation/devicetree/bindings/mailbox/ \
+		  xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+		  is used to communicate with this System controllers.
+
+--------
+Examples
+--------
+
+Example with interrupt method:
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+
+		zynqmp_power: zynqmp-power {
+			compatible = "xlnx,zynqmp-power";
+			interrupts = <0 35 4>;
+		};
+	};
+};
+
+Example with IPI mailbox method:
 
 firmware {
 	zynqmp_firmware: zynqmp-firmware {
@@ -19,7 +51,11 @@ firmware {
 
 		zynqmp_power: zynqmp-power {
 			compatible = "xlnx,zynqmp-power";
+			interrupt-parent = <&gic>;
 			interrupts = <0 35 4>;
+			mboxes = <&ipi_mailbox_pmu0 0>,
+				 <&ipi_mailbox_pmu0 1>;
+			mbox-names = "tx", "rx";
 		};
 	};
 };
diff --git a/dts/Bindings/power/supply/battery.txt b/dts/Bindings/power/supply/battery.txt
index 5c913d4cf3..3049cf88bd 100644
--- a/dts/Bindings/power/supply/battery.txt
+++ b/dts/Bindings/power/supply/battery.txt
@@ -35,6 +35,10 @@ Optional Properties:
    for each of the battery capacity lookup table. The first temperature value
    specifies the OCV table 0, and the second temperature value specifies the
    OCV table 1, and so on.
+ - resistance-temp-table: An array providing the temperature in degree Celsius
+   and corresponding battery internal resistance percent, which is used to look
+   up the resistance percent according to current temperature to get a accurate
+   batterty internal resistance in different temperatures.
 
 Battery properties are named, where possible, for the corresponding
 elements in enum power_supply_property, defined in
@@ -61,6 +65,7 @@ Example:
 		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
 		ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
 		ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
+		resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
 	};
 
 	charger: charger@11 {
diff --git a/dts/Bindings/power/supply/bq25890.txt b/dts/Bindings/power/supply/bq25890.txt
index dc05689333..dc9c8f76e0 100644
--- a/dts/Bindings/power/supply/bq25890.txt
+++ b/dts/Bindings/power/supply/bq25890.txt
@@ -1,11 +1,14 @@
 Binding for TI bq25890 Li-Ion Charger
 
-This driver will support the bq25896 and the bq25890. There are other ICs
-in the same family but those have not been tested.
+This driver will support the bq25892, the bq25896 and the bq25890. There are
+other ICs in the same family but those have not been tested.
 
 Required properties:
 - compatible: Should contain one of the following:
     * "ti,bq25890"
+    * "ti,bq25892"
+    * "ti,bq25895"
+    * "ti,bq25896"
 - reg: integer, i2c address of the device.
 - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV);
 - ti,charge-current: integer, maximum charging current (in uA);
diff --git a/dts/Bindings/power/supply/max17040_battery.txt b/dts/Bindings/power/supply/max17040_battery.txt
new file mode 100644
index 0000000000..4e0186b838
--- /dev/null
+++ b/dts/Bindings/power/supply/max17040_battery.txt
@@ -0,0 +1,33 @@
+max17040_battery
+~~~~~~~~~~~~~~~~
+
+Required properties :
+ - compatible : "maxim,max17040" or "maxim,max77836-battery"
+ - reg: i2c slave address
+
+Optional properties :
+- maxim,alert-low-soc-level :	The alert threshold that sets the state of
+				charge level (%) where an interrupt is
+				generated. Can be configured from 1 up to 32
+				(%). If skipped the power up default value of
+				4 (%) will be used.
+- interrupts : 			Interrupt line see Documentation/devicetree/
+				bindings/interrupt-controller/interrupts.txt
+- wakeup-source :		This device has wakeup capabilities. Use this
+				property to use alert low SOC level interrupt
+				as wake up source.
+
+Optional properties support interrupt functionality for alert low state of
+charge level, present in some ICs in the same family, and should be used with
+compatible "maxim,max77836-battery".
+
+Example:
+
+	battery-fuel-gauge@36 {
+		compatible = "maxim,max77836-battery";
+		reg = <0x36>;
+		maxim,alert-low-soc-level = <10>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
diff --git a/dts/Bindings/power/supply/max17042_battery.txt b/dts/Bindings/power/supply/max17042_battery.txt
index 3f3894aaee..f34c5daae9 100644
--- a/dts/Bindings/power/supply/max17042_battery.txt
+++ b/dts/Bindings/power/supply/max17042_battery.txt
@@ -2,7 +2,11 @@ max17042_battery
 ~~~~~~~~~~~~~~~~
 
 Required properties :
- - compatible : "maxim,max17042"
+ - compatible : one of the following
+ * "maxim,max17042"
+ * "maxim,max17047"
+ * "maxim,max17050"
+ * "maxim,max17055"
 
 Optional properties :
  - maxim,rsns-microohm : Resistance of rsns resistor in micro Ohms
diff --git a/dts/Bindings/power/supply/sc27xx-fg.txt b/dts/Bindings/power/supply/sc27xx-fg.txt
index 0a5705b8b5..b6359b5903 100644
--- a/dts/Bindings/power/supply/sc27xx-fg.txt
+++ b/dts/Bindings/power/supply/sc27xx-fg.txt
@@ -13,6 +13,8 @@ Required properties:
 - io-channel-names: Should be "bat-temp" or "charge-vol".
 - nvmem-cells: A phandle to the calibration cells provided by eFuse device.
 - nvmem-cell-names: Should be "fgu_calib".
+- sprd,calib-resistance-micro-ohms: Specify the real resistance of coulomb counter
+  chip in micro Ohms.
 - monitored-battery: Phandle of battery characteristics devicetree node.
   See Documentation/devicetree/bindings/power/supply/battery.txt
 
@@ -52,5 +54,6 @@ Example:
 			nvmem-cells = <&fgu_calib>;
 			nvmem-cell-names = "fgu_calib";
 			monitored-battery = <&bat>;
+			sprd,calib-resistance-micro-ohms = <21500>;
 		};
 	};
diff --git a/dts/Bindings/ptp/ptp-ines.txt b/dts/Bindings/ptp/ptp-ines.txt
new file mode 100644
index 0000000000..4c242bd1ce
--- /dev/null
+++ b/dts/Bindings/ptp/ptp-ines.txt
@@ -0,0 +1,35 @@
+ZHAW InES PTP time stamping IP core
+
+The IP core needs two different kinds of nodes.  The control node
+lives somewhere in the memory map and specifies the address of the
+control registers.  There can be up to three port handles placed as
+attributes of PHY nodes.  These associate a particular MII bus with a
+port index within the IP core.
+
+Required properties of the control node:
+
+- compatible:		"ines,ptp-ctrl"
+- reg:			physical address and size of the register bank
+
+Required format of the port handle within the PHY node:
+
+- timestamper:		provides control node reference and
+			the port channel within the IP core
+
+Example:
+
+	tstamper: timestamper@60000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x60000000 0x80>;
+	};
+
+	ethernet@80000000 {
+		...
+		mdio {
+			...
+			ethernet-phy@3 {
+				...
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
diff --git a/dts/Bindings/ptp/timestamper.txt b/dts/Bindings/ptp/timestamper.txt
new file mode 100644
index 0000000000..fc550ce4d4
--- /dev/null
+++ b/dts/Bindings/ptp/timestamper.txt
@@ -0,0 +1,42 @@
+Time stamps from MII bus snooping devices
+
+This binding supports non-PHY devices that snoop the MII bus and
+provide time stamps.  In contrast to PHY time stamping drivers (which
+can simply attach their interface directly to the PHY instance), stand
+alone MII time stamping drivers use this binding to specify the
+connection between the snooping device and a given network interface.
+
+Non-PHY MII time stamping drivers typically talk to the control
+interface over another bus like I2C, SPI, UART, or via a memory mapped
+peripheral.  This controller device is associated with one or more
+time stamping channels, each of which snoops on a MII bus.
+
+The "timestamper" property lives in a phy node and links a time
+stamping channel from the controller device to that phy's MII bus.
+
+Example:
+
+	tstamper: timestamper@10000000 {
+		compatible = "ines,ptp-ctrl";
+		reg = <0x10000000 0x80>;
+	};
+
+	ethernet@20000000 {
+		mdio {
+			ethernet-phy@1 {
+				timestamper = <&tstamper 0>;
+			};
+		};
+	};
+
+	ethernet@30000000 {
+		mdio {
+			ethernet-phy@2 {
+				timestamper = <&tstamper 1>;
+			};
+		};
+	};
+
+In this example, time stamps from the MII bus attached to phy@1 will
+appear on time stamp channel 0 (zero), and those from phy@2 appear on
+channel 1.
diff --git a/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 4a21fe77ee..7dcab2bf81 100644
--- a/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/dts/Bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -30,13 +30,51 @@ properties:
       - items:
           - const: allwinner,sun50i-h5-pwm
           - const: allwinner,sun5i-a13-pwm
+      - const: allwinner,sun50i-h6-pwm
 
   reg:
     maxItems: 1
 
   clocks:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  clock-names: true
+
+  resets:
     maxItems: 1
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun50i-h6-pwm
+
+then:
+  properties:
+    clocks:
+      maxItems: 2
+
+    clock-names:
+      items:
+        - const: mod
+        - const: bus
+
+  required:
+    - clock-names
+    - resets
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
 required:
   - "#pwm-cells"
   - compatible
@@ -54,4 +92,17 @@ examples:
         #pwm-cells = <3>;
     };
 
+  - |
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    pwm@300a000 {
+      compatible = "allwinner,sun50i-h6-pwm";
+      reg = <0x0300a000 0x400>;
+      clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+      clock-names = "mod", "bus";
+      resets = <&ccu RST_BUS_PWM>;
+      #pwm-cells = <3>;
+    };
+
 ...
diff --git a/dts/Bindings/pwm/mxs-pwm.txt b/dts/Bindings/pwm/mxs-pwm.txt
index 1b06f86a70..a1b8a482f8 100644
--- a/dts/Bindings/pwm/mxs-pwm.txt
+++ b/dts/Bindings/pwm/mxs-pwm.txt
@@ -3,7 +3,7 @@ Freescale MXS PWM controller
 Required properties:
 - compatible: should be "fsl,imx23-pwm"
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
+- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of
   the cells format.
 - fsl,pwm-number: the number of PWM devices
 
@@ -12,6 +12,6 @@ Example:
 pwm: pwm@80064000 {
 	compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 	reg = <0x80064000 0x2000>;
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	fsl,pwm-number = <8>;
 };
diff --git a/dts/Bindings/regulator/mp8859.txt b/dts/Bindings/regulator/mp8859.txt
new file mode 100644
index 0000000000..74ad697309
--- /dev/null
+++ b/dts/Bindings/regulator/mp8859.txt
@@ -0,0 +1,22 @@
+Monolithic Power Systems MP8859 voltage regulator
+
+Required properties:
+- compatible: "mps,mp8859";
+- reg: I2C slave address.
+
+Optional subnode for regulator: "mp8859_dcdc", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
diff --git a/dts/Bindings/regulator/mps,mpq7920.yaml b/dts/Bindings/regulator/mps,mpq7920.yaml
new file mode 100644
index 0000000000..a682af0dc6
--- /dev/null
+++ b/dts/Bindings/regulator/mps,mpq7920.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MPQ7920 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - mps,mpq7920
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
+
+    properties:
+      mps,switch-freq:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint8"
+        enum: [ 0, 1, 2, 3 ]
+        default: 2
+        description: |
+          switching frequency must be one of following corresponding value
+          1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^ldortc$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^buck[1-4]$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+        properties:
+          mps,buck-softstart:
+            allOf:
+              - $ref: "/schemas/types.yaml#/definitions/uint8"
+            enum: [ 0, 1, 2, 3 ]
+            description: |
+              defines the soft start time of this buck, must be one of the following
+              corresponding values 150us, 300us, 610us, 920us
+
+          mps,buck-phase-delay:
+            allOf:
+              - $ref: "/schemas/types.yaml#/definitions/uint8"
+            enum: [ 0, 1, 2, 3 ]
+            description: |
+              defines the phase delay of this buck, must be one of the following
+              corresponding values 0deg, 90deg, 180deg, 270deg
+
+          mps,buck-ovp-disable:
+            type: boolean
+            description: |
+              disables over voltage protection of this buck
+
+      additionalProperties: false
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mpq7920";
+          reg = <0x69>;
+
+          regulators {
+            mps,switch-freq = /bits/ 8 <1>;
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <400000>;
+             regulator-max-microvolt = <3587500>;
+             regulator-min-microamp  = <460000>;
+             regulator-max-microamp  = <7600000>;
+             regulator-boot-on;
+             mps,buck-ovp-disable;
+             mps,buck-phase-delay = /bits/ 8 <2>;
+             mps,buck-softstart = /bits/ 8 <1>;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <650000>;
+             regulator-max-microvolt = <3587500>;
+            };
+         };
+       };
+     };
+...
diff --git a/dts/Bindings/regulator/rohm,bd71828-regulator.yaml b/dts/Bindings/regulator/rohm,bd71828-regulator.yaml
new file mode 100644
index 0000000000..71ce032b8c
--- /dev/null
+++ b/dts/Bindings/regulator/rohm,bd71828-regulator.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  This module is part of the ROHM BD71828 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+  The valid names for BD71828 regulator nodes are
+  BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
+  LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[1-7]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-7]$"
+        description:
+          should be "ldo1", ..., "ldo7"
+
+  "^BUCK[1-7]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-7]$"
+        description:
+          should be "buck1", ..., "buck7"
+
+      rohm,dvs-run-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-lpsr-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "LPSR" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #     buck       |    run     |   idle    | suspend  | lpsr
+        #--------------------------------------------------------------
+        # 1, 2, 6, and 7 | supported  | supported | supported (*)
+        #--------------------------------------------------------------
+        # 3, 4, and 5    |                    supported (**)
+        #--------------------------------------------------------------
+        #
+        #(*)  LPSR and SUSPEND states use same voltage but both states have own
+        #     enable /
+        #     disable settings. Voltage 0 can be specified for a state to make
+        #     regulator disabled on that state.
+        #
+        #(**) All states use same voltage but have own enable / disable
+        #     settings. Voltage 0 can be specified for a state to make
+        #     regulator disabled on that state.
+
+    required:
+      - regulator-name
+  additionalProperties: false
+additionalProperties: false
diff --git a/dts/Bindings/regulator/st,stm32-booster.txt b/dts/Bindings/regulator/st,stm32-booster.txt
deleted file mode 100644
index 479ad4c875..0000000000
--- a/dts/Bindings/regulator/st,stm32-booster.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-STM32 BOOSTER - Booster for ADC analog input switches
-
-Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
-to supply ADC analog input switches.
-
-Required properties:
-- compatible: Should be one of:
-  "st,stm32h7-booster"
-  "st,stm32mp1-booster"
-- st,syscfg: Phandle to system configuration controller.
-- vdda-supply: Phandle to the vdda input analog voltage.
-
-Example:
-	booster: regulator-booster {
-		compatible = "st,stm32mp1-booster";
-		st,syscfg = <&syscfg>;
-		vdda-supply = <&vdda>;
-	};
diff --git a/dts/Bindings/regulator/st,stm32-booster.yaml b/dts/Bindings/regulator/st,stm32-booster.yaml
new file mode 100644
index 0000000000..64f1183ce8
--- /dev/null
+++ b/dts/Bindings/regulator/st,stm32-booster.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 booster for ADC analog input switches bindings
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+description: |
+  Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
+  to supply ADC analog input switches.
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-booster
+      - st,stm32mp1-booster
+
+  st,syscfg:
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description: phandle to system configuration controller.
+
+  vdda-supply:
+    description: phandle to the vdda input analog voltage.
+
+required:
+  - compatible
+  - st,syscfg
+  - vdda-supply
+
+examples:
+  - |
+    regulator-booster {
+      compatible = "st,stm32mp1-booster";
+      st,syscfg = <&syscfg>;
+      vdda-supply = <&vdda>;
+    };
+
+...
diff --git a/dts/Bindings/regulator/st,stm32-vrefbuf.txt b/dts/Bindings/regulator/st,stm32-vrefbuf.txt
deleted file mode 100644
index 5ddb8500a9..0000000000
--- a/dts/Bindings/regulator/st,stm32-vrefbuf.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-STM32 VREFBUF - Voltage reference buffer
-
-Some STM32 devices embed a voltage reference buffer which can be used as
-voltage reference for ADCs, DACs and also as voltage reference for external
-components through the dedicated VREF+ pin.
-
-Required properties:
-- compatible:		Must be "st,stm32-vrefbuf".
-- reg:			Offset and length of VREFBUF register set.
-- clocks:		Must contain an entry for peripheral clock.
-
-Example:
-	vrefbuf: regulator@58003c00 {
-		compatible = "st,stm32-vrefbuf";
-		reg = <0x58003C00 0x8>;
-		clocks = <&rcc VREF_CK>;
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <2500000>;
-		vdda-supply = <&vdda>;
-	};
diff --git a/dts/Bindings/regulator/st,stm32-vrefbuf.yaml b/dts/Bindings/regulator/st,stm32-vrefbuf.yaml
new file mode 100644
index 0000000000..33cdaeb25a
--- /dev/null
+++ b/dts/Bindings/regulator/st,stm32-vrefbuf.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Voltage reference buffer bindings
+
+description: |
+  Some STM32 devices embed a voltage reference buffer which can be used as
+  voltage reference for ADCs, DACs and also as voltage reference for external
+  components through the dedicated VREF+ pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: st,stm32-vrefbuf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdda-supply:
+    description: phandle to the vdda input analog voltage.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdda-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    vrefbuf@50025000 {
+      compatible = "st,stm32-vrefbuf";
+      reg = <0x50025000 0x8>;
+      regulator-min-microvolt = <1500000>;
+      regulator-max-microvolt = <2500000>;
+      clocks = <&rcc VREF>;
+      vdda-supply = <&vdda>;
+    };
+
+...
+
diff --git a/dts/Bindings/regulator/st,stm32mp1-pwr-reg.txt b/dts/Bindings/regulator/st,stm32mp1-pwr-reg.txt
deleted file mode 100644
index e372dd3f0c..0000000000
--- a/dts/Bindings/regulator/st,stm32mp1-pwr-reg.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-STM32MP1 PWR Regulators
------------------------
-
-Available Regulators in STM32MP1 PWR block are:
-  - reg11 for regulator 1V1
-  - reg18 for regulator 1V8
-  - usb33 for the swtich USB3V3
-
-Required properties:
-- compatible: Must be "st,stm32mp1,pwr-reg"
-- list of child nodes that specify the regulator reg11, reg18 or usb33
-  initialization data for defined regulators. The definition for each of
-  these nodes is defined using the standard binding for regulators found at
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-- vdd-supply: phandle to the parent supply/regulator node for vdd input
-- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33
-
-Example:
-
-pwr_regulators: pwr@50001000 {
-	compatible = "st,stm32mp1,pwr-reg";
-	reg = <0x50001000 0x10>;
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-
-	reg11: reg11 {
-		regulator-name = "reg11";
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-	};
-
-	reg18: reg18 {
-		regulator-name = "reg18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	usb33: usb33 {
-		regulator-name = "usb33";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
diff --git a/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml b/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml
new file mode 100644
index 0000000000..8d8f38fe85
--- /dev/null
+++ b/dts/Bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP1 PWR voltage regulators
+
+maintainers:
+  - Pascal Paillet <p.paillet@st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1,pwr-reg
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Input supply phandle(s) for vdd input
+
+  vdd_3v3_usbfs-supply:
+    description: Input supply phandle(s) for vdd_3v3_usbfs input
+
+patternProperties:
+  "^(reg11|reg18|usb33)$":
+    type: object
+
+    allOf:
+      - $ref: "regulator.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pwr@50001000 {
+      compatible = "st,stm32mp1,pwr-reg";
+      reg = <0x50001000 0x10>;
+      vdd-supply = <&vdd>;
+      vdd_3v3_usbfs-supply = <&vdd_usb>;
+
+      reg11 {
+        regulator-name = "reg11";
+        regulator-min-microvolt = <1100000>;
+        regulator-max-microvolt = <1100000>;
+      };
+
+      reg18 {
+        regulator-name = "reg18";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+      };
+
+      usb33 {
+        regulator-name = "usb33";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+      };
+    };
+...
diff --git a/dts/Bindings/remoteproc/mtk,scp.txt b/dts/Bindings/remoteproc/mtk,scp.txt
new file mode 100644
index 0000000000..3ba668bab1
--- /dev/null
+++ b/dts/Bindings/remoteproc/mtk,scp.txt
@@ -0,0 +1,36 @@
+Mediatek SCP Bindings
+----------------------------------------
+
+This binding provides support for ARM Cortex M4 Co-processor found on some
+Mediatek SoCs.
+
+Required properties:
+- compatible		Should be "mediatek,mt8183-scp"
+- reg			Should contain the address ranges for the two memory
+			regions, SRAM and CFG.
+- reg-names		Contains the corresponding names for the two memory
+			regions. These should be named "sram" & "cfg".
+- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
+- clock-names		Contains the corresponding name for the clock. This
+			should be named "main".
+
+Subnodes
+--------
+
+Subnodes of the SCP represent rpmsg devices. The names of the devices are not
+important. The properties of these nodes are defined by the individual bindings
+for the rpmsg devices - but must contain the following property:
+
+- mtk,rpmsg-name	Contains the name for the rpmsg device. Used to match
+			the subnode to rpmsg device announced by SCP.
+
+Example:
+
+	scp: scp@10500000 {
+		compatible = "mediatek,mt8183-scp";
+		reg = <0 0x10500000 0 0x80000>,
+		      <0 0x105c0000 0 0x5000>;
+		reg-names = "sram", "cfg";
+		clocks = <&infracfg CLK_INFRA_SCPSYS>;
+		clock-names = "main";
+	};
diff --git a/dts/Bindings/remoteproc/qcom,adsp.txt b/dts/Bindings/remoteproc/qcom,adsp.txt
index 292dfda977..9938918b2f 100644
--- a/dts/Bindings/remoteproc/qcom,adsp.txt
+++ b/dts/Bindings/remoteproc/qcom,adsp.txt
@@ -10,11 +10,17 @@ on the Qualcomm ADSP Hexagon core.
 		    "qcom,msm8974-adsp-pil"
 		    "qcom,msm8996-adsp-pil"
 		    "qcom,msm8996-slpi-pil"
+		    "qcom,msm8998-adsp-pas"
+		    "qcom,msm8998-slpi-pas"
 		    "qcom,qcs404-adsp-pas"
 		    "qcom,qcs404-cdsp-pas"
 		    "qcom,qcs404-wcss-pas"
 		    "qcom,sdm845-adsp-pas"
 		    "qcom,sdm845-cdsp-pas"
+		    "qcom,sm8150-adsp-pas"
+		    "qcom,sm8150-cdsp-pas"
+		    "qcom,sm8150-mpss-pas"
+		    "qcom,sm8150-slpi-pas"
 
 - interrupts-extended:
 	Usage: required
@@ -29,12 +35,18 @@ on the Qualcomm ADSP Hexagon core.
 	qcom,msm8974-adsp-pil:
 	qcom,msm8996-adsp-pil:
 	qcom,msm8996-slpi-pil:
+	qcom,msm8998-adsp-pas:
+	qcom,msm8998-slpi-pas:
 	qcom,qcs404-adsp-pas:
 	qcom,qcs404-cdsp-pas:
 	qcom,sdm845-adsp-pas:
 	qcom,sdm845-cdsp-pas:
+	qcom,sm8150-adsp-pas:
+	qcom,sm8150-cdsp-pas:
+	qcom,sm8150-slpi-pas:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,qcs404-wcss-pas:
+	qcom,sm8150-mpss-pas:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
 
@@ -67,6 +79,38 @@ on the Qualcomm ADSP Hexagon core.
 	Definition: reference to the px regulator to be held on behalf of the
 		    booting Hexagon core
 
+- power-domains:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to power-domains that match the power-domain-names
+
+- power-domain-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: The power-domains needed depend on the compatible string:
+	qcom,msm8974-adsp-pil:
+	qcom,msm8996-adsp-pil:
+	qcom,msm8998-adsp-pas:
+		    must be "cx"
+	qcom,msm8996-slpi-pil:
+		    must be "ss_cx"
+	qcom,msm8998-slpi-pas:
+		    must be "ssc_cx"
+	qcom,qcs404-adsp-pas:
+		    must be "lpi_cx"
+	qcom,qcs404-cdsp-pas:
+	qcom,qcs404-wcss-pas:
+		    must be "mx"
+	qcom,sdm845-adsp-pas:
+	qcom,sdm845-cdsp-pas:
+	qcom,sm8150-adsp-pas:
+	qcom,sm8150-cdsp-pas:
+		    must be "cx", "load_state"
+	qcom,sm8150-mpss-pas:
+		    must be "cx", "load_state", "mss"
+	qcom,sm8150-slpi-pas:
+		    must be "lcx", "lmx", "load_state"
+
 - memory-region:
 	Usage: required
 	Value type: <phandle>
diff --git a/dts/Bindings/remoteproc/qcom,q6v5.txt b/dts/Bindings/remoteproc/qcom,q6v5.txt
index c416746f93..88dfa3fc15 100644
--- a/dts/Bindings/remoteproc/qcom,q6v5.txt
+++ b/dts/Bindings/remoteproc/qcom,q6v5.txt
@@ -13,6 +13,7 @@ on the Qualcomm Hexagon core.
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
+		    "qcom,sc7180-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -43,6 +44,7 @@ on the Qualcomm Hexagon core.
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
+	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -75,6 +77,9 @@ on the Qualcomm Hexagon core.
 	qcom,msm8998-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "qdss"
+	qcom,sc7180-mss-pil:
+		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
+		    "mss_crypto", "mss_nav", "nav"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -86,7 +91,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SDM845 SoCs
+		    sub-system on SC7180, SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -95,7 +100,7 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SDM845 SoCs
+		    sub-system on SC7180, SDM845 SoCs
 
 For the compatible strings below the following supplies are required:
   "qcom,q6v5-pil"
@@ -144,6 +149,7 @@ For the compatible string below the following supplies are required:
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
+	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "cx", "mx", "mss", "load_state"
 
@@ -165,6 +171,19 @@ For the compatible string below the following supplies are required:
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
 
+For the compatible strings below the following phandle references are required:
+  "qcom,sc7180-mss-pil"
+- qcom,halt-nav-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to a list of 2 phandles with one offset each for
+		    the modem sub-system running on SC7180 SoC. The first
+		    phandle reference is to the mss clock node followed by the
+		    offset within register space for nav halt register. The
+		    second phandle reference is to a syscon representing TCSR
+		    followed by the offset within syscon for conn_box_spare0
+		    register.
+
 = SUBNODES:
 The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
 the memory regions used by the Hexagon firmware. Each sub-node must contain:
diff --git a/dts/Bindings/reset/allwinner,sun6i-a31-clock-reset.yaml b/dts/Bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
new file mode 100644
index 0000000000..001c0d2a8c
--- /dev/null
+++ b/dts/Bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Peripheral Reset Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+deprecated: true
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun6i-a31-ahb1-reset
+          - allwinner,sun6i-a31-clock-reset
+
+  # The PRCM on the A31 and A23 will have the reg property missing,
+  # since it's set at the upper level node, and will be validated by
+  # PRCM's schema. Make sure we only validate standalone nodes.
+  required:
+    - compatible
+    - reg
+
+properties:
+  "#reset-cells":
+    const: 1
+    description: >
+      This additional argument passed to that reset controller is the
+      offset of the bit controlling this particular reset line in the
+      register.
+
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-ahb1-reset
+      - allwinner,sun6i-a31-clock-reset
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#reset-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb1_rst: reset@1c202c0 {
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-ahb1-reset";
+        reg = <0x01c202c0 0xc>;
+    };
+
+  - |
+    apbs_rst: reset@80014b0 {
+        #reset-cells = <1>;
+        compatible = "allwinner,sun6i-a31-clock-reset";
+        reg = <0x080014b0 0x4>;
+    };
+
+...
diff --git a/dts/Bindings/reset/allwinner,sunxi-clock-reset.txt b/dts/Bindings/reset/allwinner,sunxi-clock-reset.txt
deleted file mode 100644
index 4ca66c96fe..0000000000
--- a/dts/Bindings/reset/allwinner,sunxi-clock-reset.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Allwinner sunxi Peripheral Reset Controller
-===========================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be one of the following:
-  "allwinner,sun6i-a31-ahb1-reset"
-  "allwinner,sun6i-a31-clock-reset"
-- reg: should be register base and length as documented in the
-  datasheet
-- #reset-cells: 1, see below
-
-example:
-
-ahb1_rst: reset@1c202c0 {
-	#reset-cells = <1>;
-	compatible = "allwinner,sun6i-a31-ahb1-reset";
-	reg = <0x01c202c0 0xc>;
-};
diff --git a/dts/Bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/dts/Bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
new file mode 100644
index 0000000000..411bd76f1b
--- /dev/null
+++ b/dts/Bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Broadcom
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,bcm7216-pcie-sata-rescal.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM7216 RESCAL reset controller
+
+description: This document describes the BCM7216 RESCAL reset controller which is responsible for controlling the reset of the SATA and PCIe0/1 instances on BCM7216.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Jim Quinlan <jim2101024@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm7216-pcie-sata-rescal
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+examples:
+  - |
+    reset-controller@8b2c800 {
+          compatible = "brcm,bcm7216-pcie-sata-rescal";
+          reg = <0x8b2c800 0x10>;
+          #reset-cells = <0>;
+    };
diff --git a/dts/Bindings/reset/intel,rcu-gw.yaml b/dts/Bindings/reset/intel,rcu-gw.yaml
new file mode 100644
index 0000000000..246dea8a2e
--- /dev/null
+++ b/dts/Bindings/reset/intel,rcu-gw.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/intel,rcu-gw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Reset Controller on Intel Gateway SoCs
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - intel,rcu-lgm
+      - intel,rcu-xrx200
+
+  reg:
+    description: Reset controller registers.
+    maxItems: 1
+
+  intel,global-reset:
+    description: Global reset register offset and bit offset.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - maxItems: 2
+
+  "#reset-cells":
+    minimum: 2
+    maximum: 3
+    description: |
+      First cell is reset request register offset.
+      Second cell is bit offset in reset request register.
+      Third cell is bit offset in reset status register.
+      For LGM SoC, reset cell count is 2 as bit offset in
+      reset request and reset status registers is same. Whereas
+      3 for legacy SoCs as bit offset differs.
+
+required:
+  - compatible
+  - reg
+  - intel,global-reset
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rcu0: reset-controller@e0000000 {
+        compatible = "intel,rcu-lgm";
+        reg = <0xe0000000 0x20000>;
+        intel,global-reset = <0x10 30>;
+        #reset-cells = <2>;
+    };
+
+    pwm: pwm@e0d00000 {
+        status = "disabled";
+        compatible = "intel,lgm-pwm";
+        reg = <0xe0d00000 0x30>;
+        clocks = <&cgu0 1>;
+        #pwm-cells = <2>;
+        resets = <&rcu0 0x30 21>;
+    };
diff --git a/dts/Bindings/reset/nuvoton,npcm-reset.txt b/dts/Bindings/reset/nuvoton,npcm-reset.txt
new file mode 100644
index 0000000000..6e802703af
--- /dev/null
+++ b/dts/Bindings/reset/nuvoton,npcm-reset.txt
@@ -0,0 +1,32 @@
+Nuvoton NPCM Reset controller
+
+Required properties:
+- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
+- reg : specifies physical base address and size of the register.
+- #reset-cells: must be set to 2
+
+Optional property:
+- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
+  NPCM7xx contain four software reset that represent numbers 1 to 4.
+
+  If 'nuvoton,sw-reset-number' is not specfied software reset is disabled.
+
+Example:
+	rstc: rstc@f0801000 {
+		compatible = "nuvoton,npcm750-reset";
+		reg = <0xf0801000 0x70>;
+		#reset-cells = <2>;
+		nuvoton,sw-reset-number = <2>;
+	};
+
+Specifying reset lines connected to IP NPCM7XX modules
+======================================================
+example:
+
+        spi0: spi@..... {
+                ...
+                resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+                ...
+        };
+
+The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
diff --git a/dts/Bindings/rng/brcm,iproc-rng200.txt b/dts/Bindings/rng/brcm,iproc-rng200.txt
index c223e54452..802523196e 100644
--- a/dts/Bindings/rng/brcm,iproc-rng200.txt
+++ b/dts/Bindings/rng/brcm,iproc-rng200.txt
@@ -2,6 +2,7 @@ HWRNG support for the iproc-rng200 driver
 
 Required properties:
 - compatible : Must be one of:
+	       "brcm,bcm2711-rng200"
 	       "brcm,bcm7211-rng200"
 	       "brcm,bcm7278-rng200"
 	       "brcm,iproc-rng200"
diff --git a/dts/Bindings/rtc/atmel,at91rm9200-rtc.txt b/dts/Bindings/rtc/atmel,at91rm9200-rtc.txt
deleted file mode 100644
index 5d3791e789..0000000000
--- a/dts/Bindings/rtc/atmel,at91rm9200-rtc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Atmel AT91RM9200 Real Time Clock
-
-Required properties:
-- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: rtc alarm/event interrupt
-- clocks: phandle to input clock.
-
-Example:
-
-rtc@fffffe00 {
-	compatible = "atmel,at91rm9200-rtc";
-	reg = <0xfffffe00 0x100>;
-	interrupts = <1 4 7>;
-	clocks = <&clk32k>;
-};
diff --git a/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml b/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml
new file mode 100644
index 0000000000..02bbfe726c
--- /dev/null
+++ b/dts/Bindings/rtc/atmel,at91rm9200-rtc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/atmel,at91rm9200-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 RTC Device Tree Bindings
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-rtc
+      - atmel,at91sam9x5-rtc
+      - atmel,sama5d4-rtc
+      - atmel,sama5d2-rtc
+      - microchip,sam9x60-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@fffffe00 {
+        compatible = "atmel,at91rm9200-rtc";
+        reg = <0xfffffe00 0x100>;
+        interrupts = <1 4 7>;
+        clocks = <&clk32k>;
+    };
+...
diff --git a/dts/Bindings/rtc/st,stm32-rtc.txt b/dts/Bindings/rtc/st,stm32-rtc.txt
deleted file mode 100644
index 130ca5b982..0000000000
--- a/dts/Bindings/rtc/st,stm32-rtc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-STM32 Real Time Clock
-
-Required properties:
-- compatible: can be one of the following:
-  - "st,stm32-rtc" for devices compatible with stm32(f4/f7).
-  - "st,stm32h7-rtc" for devices compatible with stm32h7.
-  - "st,stm32mp1-rtc" for devices compatible with stm32mp1.
-- reg: address range of rtc register set.
-- clocks: can use up to two clocks, depending on part used:
-  - "rtc_ck": RTC clock source.
-  - "pclk": RTC APB interface clock.
-    It is not present on stm32(f4/f7).
-    It is required on stm32(h7/mp1).
-- clock-names: must be "rtc_ck" and "pclk".
-    It is required on stm32(h7/mp1).
-- interrupts: rtc alarm interrupt. On stm32mp1, a second interrupt is required
-  for rtc alarm wakeup interrupt.
-- st,syscfg: phandle/offset/mask triplet. The phandle to pwrcfg used to
-  access control register at offset, and change the dbp (Disable Backup
-  Protection) bit represented by the mask, mandatory to disable/enable backup
-  domain (RTC registers) write protection.
-    It is required on stm32(f4/f7/h7).
-
-Optional properties (to override default rtc_ck parent clock on stm32(f4/f7/h7):
-- assigned-clocks: reference to the rtc_ck clock entry.
-- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
-
-Example:
-
-	rtc: rtc@40002800 {
-		compatible = "st,stm32-rtc";
-		reg = <0x40002800 0x400>;
-		clocks = <&rcc 1 CLK_RTC>;
-		assigned-clocks = <&rcc 1 CLK_RTC>;
-		assigned-clock-parents = <&rcc 1 CLK_LSE>;
-		interrupt-parent = <&exti>;
-		interrupts = <17 1>;
-		st,syscfg = <&pwrcfg 0x00 0x100>;
-	};
-
-	rtc: rtc@58004000 {
-		compatible = "st,stm32h7-rtc";
-		reg = <0x58004000 0x400>;
-		clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
-		clock-names = "pclk", "rtc_ck";
-		assigned-clocks = <&rcc RTC_CK>;
-		assigned-clock-parents = <&rcc LSE_CK>;
-		interrupt-parent = <&exti>;
-		interrupts = <17 1>;
-		interrupt-names = "alarm";
-		st,syscfg = <&pwrcfg 0x00 0x100>;
-	};
-
-	rtc: rtc@5c004000 {
-		compatible = "st,stm32mp1-rtc";
-		reg = <0x5c004000 0x400>;
-		clocks = <&rcc RTCAPB>, <&rcc RTC>;
-		clock-names = "pclk", "rtc_ck";
-		interrupts-extended = <&intc GIC_SPI 3 IRQ_TYPE_NONE>,
-				      <&exti 19 1>;
-	};
diff --git a/dts/Bindings/rtc/st,stm32-rtc.yaml b/dts/Bindings/rtc/st,stm32-rtc.yaml
new file mode 100644
index 0000000000..0a54296d72
--- /dev/null
+++ b/dts/Bindings/rtc/st,stm32-rtc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,stm32-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Real Time Clock Bindings
+
+maintainers:
+  - Gabriel Fernandez <gabriel.fernandez@st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32-rtc
+      - st,stm32h7-rtc
+      - st,stm32mp1-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: rtc_ck
+
+  interrupts:
+    maxItems: 1
+
+  st,syscfg:
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+      - items:
+          minItems: 3
+          maxItems: 3
+    description: |
+       Phandle/offset/mask triplet. The phandle to pwrcfg used to
+       access control register at offset, and change the dbp (Disable Backup
+       Protection) bit represented by the mask, mandatory to disable/enable backup
+       domain (RTC registers) write protection.
+
+  assigned-clocks:
+    description: |
+      override default rtc_ck parent clock reference to the rtc_ck clock entry
+    maxItems: 1
+
+  assigned-clock-parents:
+    description: |
+      override default rtc_ck parent clock phandle of the new parent clock of rtc_ck
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+
+        clock-names: false
+
+      required:
+        - st,syscfg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32h7-rtc
+
+    then:
+       properties:
+         clocks:
+           minItems: 2
+           maxItems: 2
+
+       required:
+         - clock-names
+         - st,syscfg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp1-rtc
+
+    then:
+       properties:
+         clocks:
+           minItems: 2
+           maxItems: 2
+
+         assigned-clocks: false
+         assigned-clock-parents: false
+
+       required:
+         - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    rtc@40002800 {
+      compatible = "st,stm32-rtc";
+      reg = <0x40002800 0x400>;
+      clocks = <&rcc 1 CLK_RTC>;
+      assigned-clocks = <&rcc 1 CLK_RTC>;
+      assigned-clock-parents = <&rcc 1 CLK_LSE>;
+      interrupt-parent = <&exti>;
+      interrupts = <17 1>;
+      st,syscfg = <&pwrcfg 0x00 0x100>;
+    };
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    rtc@5c004000 {
+      compatible = "st,stm32mp1-rtc";
+      reg = <0x5c004000 0x400>;
+      clocks = <&rcc RTCAPB>, <&rcc RTC>;
+      clock-names = "pclk", "rtc_ck";
+      interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+...
diff --git a/dts/Bindings/serial/fsl-lpuart.txt b/dts/Bindings/serial/fsl-lpuart.txt
index f5f5ab0fd1..c904e2e683 100644
--- a/dts/Bindings/serial/fsl-lpuart.txt
+++ b/dts/Bindings/serial/fsl-lpuart.txt
@@ -10,6 +10,8 @@ Required properties:
     on i.MX7ULP SoC with 32-bit little-endian register organization
   - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated
     on i.MX8QXP SoC with 32-bit little-endian register organization
+  - "fsl,imx8qm-lpuart" for lpuart compatible with the one integrated
+    on i.MX8QM SoC with 32-bit little-endian register organization
 - reg : Address and length of the register set for the device
 - interrupts : Should contain uart interrupt
 - clocks : phandle + clock specifier pairs, one for each entry in clock-names
diff --git a/dts/Bindings/serial/rs485.txt b/dts/Bindings/serial/rs485.txt
index b92592dff6..a7fe93efc4 100644
--- a/dts/Bindings/serial/rs485.txt
+++ b/dts/Bindings/serial/rs485.txt
@@ -1,31 +1 @@
-* RS485 serial communications
-
-The RTS signal is capable of automatically controlling line direction for
-the built-in half-duplex mode.
-The properties described hereafter shall be given to a half-duplex capable
-UART node.
-
-Optional properties:
-- rs485-rts-delay: prop-encoded-array <a b> where:
-  * a is the delay between rts signal and beginning of data sent in milliseconds.
-      it corresponds to the delay before sending data.
-  * b is the delay between end of data sent and rts signal in milliseconds
-      it corresponds to the delay after sending data and actual release of the line.
-  If this property is not specified, <0 0> is assumed.
-- rs485-rts-active-low: drive RTS low when sending (default is high).
-- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
-  feature at boot time. It can be disabled later with proper ioctl.
-- rs485-rx-during-tx: empty property that enables the receiving of data even
-  while sending data.
-
-RS485 example for Atmel USART:
-	usart0: serial@fff8c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xfff8c000 0x4000>;
-		interrupts = <7>;
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		linux,rs485-enabled-at-boot-time;
-		rs485-rts-delay = <0 200>;		// in milliseconds
-	};
-
+See rs485.yaml
diff --git a/dts/Bindings/serial/rs485.yaml b/dts/Bindings/serial/rs485.yaml
new file mode 100644
index 0000000000..d4beaf1122
--- /dev/null
+++ b/dts/Bindings/serial/rs485.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rs485.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RS485 serial communications Bindings
+
+description: The RTS signal is capable of automatically controlling
+             line direction for the built-in half-duplex mode.
+             The properties described hereafter shall be given to a
+             half-duplex capable UART node.
+
+maintainers:
+  -  Rob Herring <robh@kernel.org>
+
+properties:
+  rs485-rts-delay:
+    description: prop-encoded-array <a b>
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - items:
+          items:
+            - description:
+                Delay between rts signal and beginning of data sent in milliseconds.
+                It corresponds to the delay before sending data.
+              default: 0
+              maximum: 1000
+            - description:
+                Delay between end of data sent and rts signal in milliseconds.
+                It corresponds to the delay after sending data and actual release of the line.
+              default: 0
+              maximum: 1000
+
+  rs485-rts-active-low:
+    description: drive RTS low when sending (default is high).
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  linux,rs485-enabled-at-boot-time:
+    description: enables the rs485 feature at boot time. It can be disabled later with proper ioctl.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  rs485-rx-during-tx:
+   description: enables the receiving of data even while sending data.
+   $ref: /schemas/types.yaml#/definitions/flag
diff --git a/dts/Bindings/serial/st,stm32-uart.yaml b/dts/Bindings/serial/st,stm32-uart.yaml
new file mode 100644
index 0000000000..238c44192d
--- /dev/null
+++ b/dts/Bindings/serial/st,stm32-uart.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Erwan Le Ray <erwan.leray@st.com>
+
+title: STMicroelectronics STM32 USART bindings
+
+allOf:
+  - $ref: rs485.yaml
+
+properties:
+  compatible:
+    enum:
+      - st,stm32-uart
+      - st,stm32f7-uart
+      - st,stm32h7-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  label:
+    description: label associated with this uart
+
+  st,hw-flow-ctrl:
+    description: enable hardware flow control
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    items:
+      enum: [ rx, tx ]
+    minItems: 1
+    maxItems: 2
+
+  wakeup-source: true
+
+  rs485-rts-delay: true
+  rs485-rts-active-low: true
+  linux,rs485-enabled-at-boot-time: true
+  rs485-rx-during-tx: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    usart1: serial@40011000 {
+      compatible = "st,stm32-uart";
+      reg = <0x40011000 0x400>;
+      interrupts = <37>;
+      clocks = <&rcc 0 164>;
+      dmas = <&dma2 2 4 0x414 0x0>,
+             <&dma2 7 4 0x414 0x0>;
+      dma-names = "rx", "tx";
+      rs485-rts-active-low;
+    };
+
+...
diff --git a/dts/Bindings/serial/st,stm32-usart.txt b/dts/Bindings/serial/st,stm32-usart.txt
deleted file mode 100644
index 8620f7fcbd..0000000000
--- a/dts/Bindings/serial/st,stm32-usart.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* STMicroelectronics STM32 USART
-
-Required properties:
-- compatible: can be either:
-  - "st,stm32-uart",
-  - "st,stm32f7-uart",
-  - "st,stm32h7-uart".
-  depending is compatible with stm32(f4), stm32f7 or stm32h7.
-- reg: The address and length of the peripheral registers space
-- interrupts:
-  - The interrupt line for the USART instance,
-  - An optional wake-up interrupt.
-- clocks: The input clock of the USART instance
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- pinctrl: The reference on the pins configuration
-- st,hw-flow-ctrl: bool flag to enable hardware flow control.
-- rs485-rts-delay, rs485-rx-during-tx, rs485-rts-active-low,
-  linux,rs485-enabled-at-boot-time: see rs485.txt.
-- dmas: phandle(s) to DMA controller node(s). Refer to stm32-dma.txt
-- dma-names: "rx" and/or "tx"
-- wakeup-source: bool flag to indicate this device has wakeup capabilities
-- interrupt-names, if optional wake-up interrupt is used, should be:
-  - "event": the name for the interrupt line of the USART instance
-  - "wakeup" the name for the optional wake-up interrupt
-
-
-Examples:
-usart4: serial@40004c00 {
-	compatible = "st,stm32-uart";
-	reg = <0x40004c00 0x400>;
-	interrupts = <52>;
-	clocks = <&clk_pclk1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart4>;
-};
-
-usart2: serial@40004400 {
-	compatible = "st,stm32-uart";
-	reg = <0x40004400 0x400>;
-	interrupts = <38>;
-	clocks = <&clk_pclk1>;
-	st,hw-flow-ctrl;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>;
-};
-
-usart1: serial@40011000 {
-	compatible = "st,stm32-uart";
-	reg = <0x40011000 0x400>;
-	interrupts = <37>;
-	clocks = <&rcc 0 164>;
-	dmas = <&dma2 2 4 0x414 0x0>,
-	       <&dma2 7 4 0x414 0x0>;
-	dma-names = "rx", "tx";
-};
diff --git a/dts/Bindings/slimbus/bus.txt b/dts/Bindings/slimbus/bus.txt
index 52fa642638..bbe871f82a 100644
--- a/dts/Bindings/slimbus/bus.txt
+++ b/dts/Bindings/slimbus/bus.txt
@@ -32,6 +32,10 @@ Required property for SLIMbus child node if it is present:
 	 	  Product Code, shall be in lower case hexadecimal with leading
 		  zeroes suppressed
 
+Optional property for SLIMbus child node if it is present:
+- slim-ifc-dev	- Should be phandle to SLIMBus Interface device.
+		  Required for devices which deal with streams.
+
 SLIMbus example for Qualcomm's slimbus manager component:
 
 	slim@28080000 {
@@ -43,8 +47,14 @@ SLIMbus example for Qualcomm's slimbus manager component:
 		#address-cells = <2>;
 		#size-cell = <0>;
 
+		codec_ifd: ifd@0,0{
+			compatible = "slim217,60";
+			reg = <0 0>;
+		};
+
 		codec: wcd9310@1,0{
 			compatible = "slim217,60";
 			reg = <1 0>;
+			slim-ifc-dev  = <&codec_ifd>;
 		};
 	};
diff --git a/dts/Bindings/soc/mediatek/scpsys.txt b/dts/Bindings/soc/mediatek/scpsys.txt
index 8f469d8583..2bc367793a 100644
--- a/dts/Bindings/soc/mediatek/scpsys.txt
+++ b/dts/Bindings/soc/mediatek/scpsys.txt
@@ -11,6 +11,7 @@ The driver implements the Generic PM domain bindings described in
 power/power-domain.yaml. It provides the power domains defined in
 - include/dt-bindings/power/mt8173-power.h
 - include/dt-bindings/power/mt6797-power.h
+- include/dt-bindings/power/mt6765-power.h
 - include/dt-bindings/power/mt2701-power.h
 - include/dt-bindings/power/mt2712-power.h
 - include/dt-bindings/power/mt7622-power.h
@@ -19,6 +20,7 @@ Required properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-scpsys"
 	- "mediatek,mt2712-scpsys"
+	- "mediatek,mt6765-scpsys"
 	- "mediatek,mt6797-scpsys"
 	- "mediatek,mt7622-scpsys"
 	- "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC
@@ -33,6 +35,10 @@ Required properties:
                       enabled before enabling certain power domains.
 	Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif"
 	Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec"
+	Required clocks for MT6765: MUX: "mm", "mfg"
+				    CG: "mm-0", "mm-1", "mm-2", "mm-3", "isp-0",
+					"isp-1", "cam-0", "cam-1", "cam-2",
+					"cam-3","cam-4"
 	Required clocks for MT6797: "mm", "mfg", "vdec"
 	Required clocks for MT7622 or MT7629: "hif_sel"
 	Required clocks for MT7623A: "ethif"
diff --git a/dts/Bindings/soc/ti/k3-ringacc.txt b/dts/Bindings/soc/ti/k3-ringacc.txt
new file mode 100644
index 0000000000..59758ccce8
--- /dev/null
+++ b/dts/Bindings/soc/ti/k3-ringacc.txt
@@ -0,0 +1,59 @@
+* Texas Instruments K3 NavigatorSS Ring Accelerator
+
+The Ring Accelerator (RA) is a machine which converts read/write accesses
+from/to a constant address into corresponding read/write accesses from/to a
+circular data structure in memory. The RA eliminates the need for each DMA
+controller which needs to access ring elements from having to know the current
+state of the ring (base address, current offset). The DMA controller
+performs a read or write access to a specific address range (which maps to the
+source interface on the RA) and the RA replaces the address for the transaction
+with a new address which corresponds to the head or tail element of the ring
+(head for reads, tail for writes).
+
+The Ring Accelerator is a hardware module that is responsible for accelerating
+management of the packet queues. The K3 SoCs can have more than one RA instances
+
+Required properties:
+- compatible	: Must be "ti,am654-navss-ringacc";
+- reg		: Should contain register location and length of the following
+		  named register regions.
+- reg-names	: should be
+		  "rt" - The RA Ring Real-time Control/Status Registers
+		  "fifos" - The RA Queues Registers
+		  "proxy_gcfg" - The RA Proxy Global Config Registers
+		  "proxy_target" - The RA Proxy Datapath Registers
+- ti,num-rings	: Number of rings supported by RA
+- ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range
+- ti,sci	: phandle on TI-SCI compatible System controller node
+- ti,sci-dev-id	: TI-SCI device id of the ring accelerator
+- msi-parent	: phandle for "ti,sci-inta" interrupt controller
+
+Optional properties:
+ -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability
+		  issue software w/a
+
+Example:
+
+ringacc: ringacc@3c000000 {
+	compatible = "ti,am654-navss-ringacc";
+	reg =	<0x0 0x3c000000 0x0 0x400000>,
+		<0x0 0x38000000 0x0 0x400000>,
+		<0x0 0x31120000 0x0 0x100>,
+		<0x0 0x33000000 0x0 0x40000>;
+	reg-names = "rt", "fifos",
+		    "proxy_gcfg", "proxy_target";
+	ti,num-rings = <818>;
+	ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+	ti,dma-ring-reset-quirk;
+	ti,sci = <&dmsc>;
+	ti,sci-dev-id = <187>;
+	msi-parent = <&inta_main_udmass>;
+};
+
+client:
+
+dma_ipx: dma_ipx@<addr> {
+	...
+	ti,ringacc = <&ringacc>;
+	...
+}
diff --git a/dts/Bindings/sound/amlogic,axg-fifo.txt b/dts/Bindings/sound/amlogic,axg-fifo.txt
index 3080979350..fa4545ed81 100644
--- a/dts/Bindings/sound/amlogic,axg-fifo.txt
+++ b/dts/Bindings/sound/amlogic,axg-fifo.txt
@@ -17,6 +17,9 @@ Required properties:
   * "arb" : memory ARB line (required)
   * "rst" : dedicated device reset line (optional)
 - #sound-dai-cells: must be 0.
+- amlogic,fifo-depth: The size of the controller's fifo in bytes. This
+  		      is useful for determining certain configuration such
+		      as the flush threshold of the fifo
 
 Example of FRDDR A on the A113 SoC:
 
@@ -27,4 +30,5 @@ frddr_a: audio-controller@1c0 {
 	interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
 	clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
 	resets = <&arb AXG_ARB_FRDDR_A>;
+	fifo-depth = <512>;
 };
diff --git a/dts/Bindings/sound/fsl,asrc.txt b/dts/Bindings/sound/fsl,asrc.txt
index 1d4d9f9386..cb9a251655 100644
--- a/dts/Bindings/sound/fsl,asrc.txt
+++ b/dts/Bindings/sound/fsl,asrc.txt
@@ -8,7 +8,12 @@ three substreams within totally 10 channels.
 
 Required properties:
 
-  - compatible		: Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+  - compatible		: Compatible list, should contain one of the following
+			  compatibles:
+			  "fsl,imx35-asrc",
+			  "fsl,imx53-asrc",
+			  "fsl,imx8qm-asrc",
+			  "fsl,imx8qxp-asrc",
 
   - reg			: Offset and length of the register set for the device.
 
@@ -35,6 +40,11 @@ Required properties:
 
    - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
 
+   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
+			  by imx8qm/imx8qxp platform
+			  <0> - select the map for asrc0 in imx8qm/imx8qxp
+			  <1> - select the map for asrc1 in imx8qm/imx8qxp
+
 Optional properties:
 
    - big-endian		: If this property is absent, the little endian mode
diff --git a/dts/Bindings/sound/gtm601.txt b/dts/Bindings/sound/gtm601.txt
index 5efc8c068d..efa32a486c 100644
--- a/dts/Bindings/sound/gtm601.txt
+++ b/dts/Bindings/sound/gtm601.txt
@@ -1,10 +1,16 @@
 GTM601 UMTS modem audio interface CODEC
 
-This device has no configuration interface. Sample rate is fixed - 8kHz.
+This device has no configuration interface. The sample rate and channels are
+based on the compatible string
+	"option,gtm601" = 8kHz mono
+	"broadmobi,bm818" = 48KHz stereo
 
 Required properties:
 
-  - compatible : "option,gtm601"
+  - compatible : one of
+	"option,gtm601"
+	"broadmobi,bm818"
+
 
 Example:
 
diff --git a/dts/Bindings/sound/ingenic,codec.yaml b/dts/Bindings/sound/ingenic,codec.yaml
new file mode 100644
index 0000000000..eb4be86464
--- /dev/null
+++ b/dts/Bindings/sound/ingenic,codec.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx internal codec DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-codec@.*'
+
+  compatible:
+    oneOf:
+      - const: ingenic,jz4770-codec
+      - const: ingenic,jz4725b-codec
+      - const: ingenic,jz4740-codec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aic
+
+  '#sound-dai-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    codec: audio-codec@10020080 {
+      compatible = "ingenic,jz4740-codec";
+      reg = <0x10020080 0x8>;
+      #sound-dai-cells = <0>;
+      clocks = <&cgu JZ4740_CLK_AIC>;
+      clock-names = "aic";
+    };
+
+...
diff --git a/dts/Bindings/sound/ingenic,jz4725b-codec.txt b/dts/Bindings/sound/ingenic,jz4725b-codec.txt
deleted file mode 100644
index 05adc0d47b..0000000000
--- a/dts/Bindings/sound/ingenic,jz4725b-codec.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Ingenic JZ4725B codec controller
-
-Required properties:
-- compatible : "ingenic,jz4725b-codec"
-- reg : codec registers location and length
-- clocks : phandle to the AIC clock.
-- clock-names: must be set to "aic".
-- #sound-dai-cells: Must be set to 0.
-
-Example:
-
-codec: audio-codec@100200a4 {
-	compatible = "ingenic,jz4725b-codec";
-	reg = <0x100200a4 0x8>;
-
-	#sound-dai-cells = <0>;
-
-	clocks = <&cgu JZ4725B_CLK_AIC>;
-	clock-names = "aic";
-};
diff --git a/dts/Bindings/sound/ingenic,jz4740-codec.txt b/dts/Bindings/sound/ingenic,jz4740-codec.txt
deleted file mode 100644
index 1ffcade87e..0000000000
--- a/dts/Bindings/sound/ingenic,jz4740-codec.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Ingenic JZ4740 codec controller
-
-Required properties:
-- compatible : "ingenic,jz4740-codec"
-- reg : codec registers location and length
-- clocks : phandle to the AIC clock.
-- clock-names: must be set to "aic".
-- #sound-dai-cells: Must be set to 0.
-
-Example:
-
-codec: audio-codec@10020080 {
-	compatible = "ingenic,jz4740-codec";
-	reg = <0x10020080 0x8>;
-
-	#sound-dai-cells = <0>;
-
-	clocks = <&cgu JZ4740_CLK_AIC>;
-	clock-names = "aic";
-};
diff --git a/dts/Bindings/sound/qcom,sdm845.txt b/dts/Bindings/sound/qcom,sdm845.txt
index 408c4837e6..ca8c89e88b 100644
--- a/dts/Bindings/sound/qcom,sdm845.txt
+++ b/dts/Bindings/sound/qcom,sdm845.txt
@@ -5,7 +5,10 @@ This binding describes the SDM845 sound card, which uses qdsp for audio.
 - compatible:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "qcom,sdm845-sndcard"
+	Definition: must be one of this
+			"qcom,sdm845-sndcard"
+			"qcom,db845c-sndcard"
+			"lenovo,yoga-c630-sndcard"
 
 - audio-routing:
 	Usage: Optional
diff --git a/dts/Bindings/sound/qcom,wcd934x.yaml b/dts/Bindings/sound/qcom,wcd934x.yaml
new file mode 100644
index 0000000000..38eaf0c028
--- /dev/null
+++ b/dts/Bindings/sound/qcom,wcd934x.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
+  It has in-built Soundwire controller, pin controller, interrupt mux and
+  supports both I2S/I2C and SLIMbus audio interfaces.
+
+properties:
+  compatible:
+    const: slim217,250
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  slim-ifc-dev: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-buck-sido-supply:
+    description: A reference to the 1.8V SIDO buck supply
+
+  vdd-rx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-tx-supply:
+    description: A reference to the 1.8V tx supply
+
+  vdd-vbat-supply:
+    description: A reference to the vbat supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-micbias-supply:
+    description: A reference to the micbias supply
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  clock-output-names:
+    const: mclk
+
+  clock-frequency:
+    description: Clock frequency of output clk in Hz
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  gpio@42:
+    type: object
+    allOf:
+      - $ref: ../gpio/qcom,wcd934x-gpio.yaml#
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: |
+      WCD934x subnode for each slave devices. Bindings of each subnodes
+      depends on the specific driver providing the functionality and
+      documented in their respective bindings.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - slim-ifc-dev
+  - interrupts
+  - interrupt-controller
+  - clock-frequency
+  - clock-output-names
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#interrupt-cells"
+  - "#clock-cells"
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    codec@1,0{
+        compatible = "slim217,250";
+        reg  = <1 0>;
+        reset-gpios = <&tlmm 64 0>;
+        slim-ifc-dev  = <&wcd9340_ifd>;
+        #sound-dai-cells = <1>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <54 4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #clock-cells = <0>;
+        clock-frequency = <9600000>;
+        clock-output-names = "mclk";
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        clock-names = "extclk";
+        clocks = <&rpmhcc 2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        gpio@42 {
+            compatible = "qcom,wcd9340-gpio";
+            reg = <0x42 0x2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/sound/qcom,wsa881x.yaml b/dts/Bindings/sound/qcom,wsa881x.yaml
new file mode 100644
index 0000000000..ea44d03e58
--- /dev/null
+++ b/dts/Bindings/sound/qcom,wsa881x.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA8810 is a class-D smart speaker amplifier and WSA8815
+  is a high-output power class-D smart speaker amplifier.
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+properties:
+  compatible:
+    const: sdw10217201000
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@c2d0000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0c2d0000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217201000";
+            reg = <0 1>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217201000";
+            reg = <0 2>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...
diff --git a/dts/Bindings/sound/rt1015.txt b/dts/Bindings/sound/rt1015.txt
new file mode 100644
index 0000000000..fcfd02d8d3
--- /dev/null
+++ b/dts/Bindings/sound/rt1015.txt
@@ -0,0 +1,17 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1015: codec@28 {
+	compatible = "realtek,rt1015";
+	reg = <0x28>;
+};
diff --git a/dts/Bindings/sound/rt5645.txt b/dts/Bindings/sound/rt5645.txt
index a03f9a872a..41a62fd2ae 100644
--- a/dts/Bindings/sound/rt5645.txt
+++ b/dts/Bindings/sound/rt5645.txt
@@ -10,6 +10,10 @@ Required properties:
 
 - interrupts : The CODEC's interrupt output.
 
+- avdd-supply: Power supply for AVDD, providing 1.8V.
+
+- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
+
 Optional properties:
 
 - hp-detect-gpios:
diff --git a/dts/Bindings/soundwire/qcom,sdw.txt b/dts/Bindings/soundwire/qcom,sdw.txt
new file mode 100644
index 0000000000..436547f3b1
--- /dev/null
+++ b/dts/Bindings/soundwire/qcom,sdw.txt
@@ -0,0 +1,167 @@
+Qualcomm SoundWire Controller Bindings
+
+
+This binding describes the Qualcomm SoundWire Controller along with its
+board specific bus parameters.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
+		    Example:
+			"qcom,soundwire-v1.3.0"
+			"qcom,soundwire-v1.5.0"
+			"qcom,soundwire-v1.6.0"
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of SoundWire controller
+		    address space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the SoundWire Controller IRQ
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: should be "iface" for SoundWire Controller interface clock
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the SoundWire Controller interface clock
+
+- #sound-dai-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1 for digital audio interfaces on the controller.
+
+- qcom,dout-ports:
+	Usage: required
+	Value type: <u32>
+	Definition: must be count of data out ports
+
+- qcom,din-ports:
+	Usage: required
+	Value type: <u32>
+	Definition: must be count of data in ports
+
+- qcom,ports-offset1:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify payload transport window offset1 of each
+		    data port. Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-offset2:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify payload transport window offset2 of each
+		    data port. Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-sinterval-low:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should be sample interval low of each data port.
+		    Out ports followed by In ports. Used for Sample Interval
+		    calculation.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-word-length:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be size of payload channel sample.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-pack-mode:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be 0 or 1 to indicate the block packing mode.
+		    0 to indicate Blocks are per Channel
+		    1 to indicate Blocks are per Port.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-group-count:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be in range 1 to 4 to indicate how many sample
+		    intervals are combined into a payload.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-lane-control:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be in range 0 to 7 to identify which	data lane
+		    the data port uses.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstart:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be number identifying lowerst numbered coloum in
+		    SoundWire Frame, i.e. left edge of the Transport sub-frame
+		    for each port. Values between 0 and 15 are valid.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstop:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be number identifying highest numbered coloum in
+		    SoundWire Frame, i.e. the right edge of the Transport
+		    sub-frame for each port. Values between 0 and 15 are valid.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,dports-type:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be one of the following types
+		    0 for reduced port
+		    1 for simple ports
+		    2 for full port
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+Note:
+	More Information on detail of encoding of these fields can be
+found in MIPI Alliance SoundWire 1.0 Specifications.
+
+= SoundWire devices
+Each subnode of the bus represents SoundWire device attached to it.
+The properties of these nodes are defined by the individual bindings.
+
+= EXAMPLE
+The following example represents a SoundWire controller on DB845c board
+which has controller integrated inside WCD934x codec on SDM845 SoC.
+
+soundwire: soundwire@c85 {
+	compatible = "qcom,soundwire-v1.3.0";
+	reg = <0xc85 0x20>;
+	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&wcc>;
+	clock-names = "iface";
+	#sound-dai-cells = <1>;
+	qcom,dports-type = <0>;
+	qcom,dout-ports	= <6>;
+	qcom,din-ports	= <2>;
+	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
+	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
+	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
+
+	/* Left Speaker */
+	left{
+		....
+	};
+
+	/* Right Speaker */
+	right{
+		....
+	};
+};
diff --git a/dts/Bindings/soundwire/soundwire-controller.yaml b/dts/Bindings/soundwire/soundwire-controller.yaml
index 1b43993bcc..330924b861 100644
--- a/dts/Bindings/soundwire/soundwire-controller.yaml
+++ b/dts/Bindings/soundwire/soundwire-controller.yaml
@@ -69,6 +69,7 @@ examples:
             reg = <0 1>;
             powerdown-gpios = <&wcdpinctrl 2 0>;
             #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
         };
 
         speaker@0,2 {
@@ -76,6 +77,7 @@ examples:
             reg = <0 2>;
             powerdown-gpios = <&wcdpinctrl 2 0>;
             #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
         };
     };
 
diff --git a/dts/Bindings/spi/fsl-spi.txt b/dts/Bindings/spi/fsl-spi.txt
index 411375eac5..0654380eb7 100644
--- a/dts/Bindings/spi/fsl-spi.txt
+++ b/dts/Bindings/spi/fsl-spi.txt
@@ -15,13 +15,13 @@ Required properties:
 - clock-frequency : input clock frequency to non FSL_SOC cores
 
 Optional properties:
-- gpios : specifies the gpio pins to be used for chipselects.
+- cs-gpios : specifies the gpio pins to be used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.
 - fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the
   SPISEL_BOOT signal is used as chip select for a slave device. Use
   reg = <number of gpios> in the corresponding child node, i.e. 0 if
-  the gpios property is not present.
+  the cs-gpios property is not present.
 
 Example:
 	spi@4c0 {
@@ -31,8 +31,8 @@ Example:
 		interrupts = <82 0>;
 		interrupt-parent = <700>;
 		mode = "cpu";
-		gpios = <&gpio 18 1	// device reg=<0>
-			 &gpio 19 1>;	// device reg=<1>
+		cs-gpios = <&gpio 18 1		// device reg=<0>
+			    &gpio 19 1>;	// device reg=<1>
 	};
 
 
diff --git a/dts/Bindings/spi/nuvoton,npcm-pspi.txt b/dts/Bindings/spi/nuvoton,npcm-pspi.txt
index 1fd9a4406a..b98203ca65 100644
--- a/dts/Bindings/spi/nuvoton,npcm-pspi.txt
+++ b/dts/Bindings/spi/nuvoton,npcm-pspi.txt
@@ -12,6 +12,7 @@ Required properties:
  - clock-names: Should be "clk_apb5".
  - pinctrl-names : a pinctrl state named "default" must be defined.
  - pinctrl-0 : phandle referencing pin configuration of the device.
+ - resets : phandle to the reset control for this device.
  - cs-gpios: Specifies the gpio pins to be used for chipselects.
             See: Documentation/devicetree/bindings/spi/spi-bus.txt
 
@@ -19,16 +20,6 @@ Optional properties:
 - clock-frequency : Input clock frequency to the PSPI block in Hz.
 		    Default is 25000000 Hz.
 
-Aliases:
-- All the SPI controller nodes should be represented in the aliases node using
-  the following format 'spi{n}' withe the correct numbered in "aliases" node.
-
-Example:
-
-aliases {
-	spi0 = &spi0;
-};
-
 spi0: spi@f0200000 {
 	compatible = "nuvoton,npcm750-pspi";
 	reg = <0xf0200000 0x1000>;
@@ -39,5 +30,6 @@ spi0: spi@f0200000 {
 	interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&clk NPCM7XX_CLK_APB5>;
 	clock-names = "clk_apb5";
+	resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>
 	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 };
diff --git a/dts/Bindings/spi/spi-stm32.txt b/dts/Bindings/spi/spi-stm32.txt
deleted file mode 100644
index d82755c63e..0000000000
--- a/dts/Bindings/spi/spi-stm32.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI Controller
-
-The STM32 SPI controller is used to communicate with external devices using
-the Serial Peripheral Interface. It supports full-duplex, half-duplex and
-simplex synchronous serial communication with external devices. It supports
-from 4 to 32-bit data size. Although it can be configured as master or slave,
-only master is supported by the driver.
-
-Required properties:
-- compatible: Should be one of:
-  "st,stm32h7-spi"
-  "st,stm32f4-spi"
-- reg: Offset and length of the device's register set.
-- interrupts: Must contain the interrupt id.
-- clocks: Must contain an entry for spiclk (which feeds the internal clock
-	  generator).
-- #address-cells:  Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- resets: Must contain the phandle to the reset controller.
-- A pinctrl state named "default" may be defined to set pins in mode of
-  operation for SPI transfer.
-- dmas: DMA specifiers for tx and rx dma. DMA fifo mode must be used. See the
-  STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt.
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
-  Documentation/devicetree/bindings/spi/spi-bus.txt
-
-
-Child nodes represent devices on the SPI bus
-  See ../spi/spi-bus.txt
-
-Optional properties:
-- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
-		  delay in nanoseconds inserted between two consecutive data
-		  frames.
-
-
-Example:
-	spi2: spi@40003800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "st,stm32h7-spi";
-		reg = <0x40003800 0x400>;
-		interrupts = <36>;
-		clocks = <&rcc SPI2_CK>;
-		resets = <&rcc 1166>;
-		dmas = <&dmamux1 0 39 0x400 0x01>,
-		       <&dmamux1 1 40 0x400 0x01>;
-		dma-names = "rx", "tx";
-		pinctrl-0 = <&spi2_pins_b>;
-		pinctrl-names = "default";
-		cs-gpios = <&gpioa 11 0>;
-
-		aardvark@0 {
-			compatible = "totalphase,aardvark";
-			reg = <0>;
-			spi-max-frequency = <4000000>;
-			st,spi-midi-ns = <4000>;
-		};
-	};
diff --git a/dts/Bindings/spi/spi_atmel.txt b/dts/Bindings/spi/spi_atmel.txt
index f99c733d75..5bb4a8f1df 100644
--- a/dts/Bindings/spi/spi_atmel.txt
+++ b/dts/Bindings/spi/spi_atmel.txt
@@ -1,7 +1,7 @@
 Atmel SPI device
 
 Required properties:
-- compatible : should be "atmel,at91rm9200-spi".
+- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi".
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
 - cs-gpios: chipselects (optional for SPI controller version >= 2 with the
diff --git a/dts/Bindings/spi/st,stm32-spi.yaml b/dts/Bindings/spi/st,stm32-spi.yaml
new file mode 100644
index 0000000000..f0d979664f
--- /dev/null
+++ b/dts/Bindings/spi/st,stm32-spi.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI Controller bindings
+
+description: |
+  The STM32 SPI controller is used to communicate with external devices using
+  the Serial Peripheral Interface. It supports full-duplex, half-duplex and
+  simplex synchronous serial communication with external devices. It supports
+  from 4 to 32-bit data size.
+
+maintainers:
+  - Erwan Leray <erwan.leray@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-spi
+
+    then:
+      properties:
+        st,spi-midi-ns: false
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-spi
+      - st,stm32h7-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    description: |
+      DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
+      the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+    items:
+      - description: rx DMA channel
+      - description: tx DMA channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+patternProperties:
+  "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
+    type: object
+    # SPI slave nodes must be children of the SPI master node and can
+    # contain the following properties.
+    properties:
+      st,spi-midi-ns:
+        description: |
+          Only for STM32H7, (Master Inter-Data Idleness) minimum time
+          delay in nanoseconds inserted between two consecutive data frames.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    spi@4000b000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "st,stm32h7-spi";
+      reg = <0x4000b000 0x400>;
+      interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc SPI2_K>;
+      resets = <&rcc SPI2_R>;
+      dmas = <&dmamux1 0 39 0x400 0x05>,
+             <&dmamux1 1 40 0x400 0x05>;
+      dma-names = "rx", "tx";
+      cs-gpios = <&gpioa 11 0>;
+
+      aardvark@0 {
+        compatible = "totalphase,aardvark";
+        reg = <0>;
+        spi-max-frequency = <4000000>;
+        st,spi-midi-ns = <4000>;
+      };
+    };
+
+...
diff --git a/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
new file mode 100644
index 0000000000..80bac7a182
--- /dev/null
+++ b/dts/Bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 System Control Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description:
+  The SRAM controller found on most Allwinner devices is represented
+  by a regular node for the SRAM controller itself, with sub-nodes
+  representing the SRAM handled by the SRAM controller.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun4i-a10-sram-controller
+        deprecated: true
+      - const: allwinner,sun4i-a10-system-control
+      - const: allwinner,sun5i-a13-system-control
+      - items:
+        - const: allwinner,sun7i-a20-system-control
+        - const: allwinner,sun4i-a10-system-control
+      - const: allwinner,sun8i-a23-system-control
+      - const: allwinner,sun8i-h3-system-control
+      - const: allwinner,sun50i-a64-sram-controller
+        deprecated: true
+      - const: allwinner,sun50i-a64-system-control
+      - const: allwinner,sun50i-h5-system-control
+      - items:
+        - const: allwinner,sun50i-h6-system-control
+        - const: allwinner,sun50i-a64-system-control
+      - items:
+        - const: allwinner,suniv-f1c100s-system-control
+        - const: allwinner,sun4i-a10-system-control
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  "^sram@[a-z0-9]+":
+    type: object
+
+    properties:
+      compatible:
+        const: mmio-sram
+
+    patternProperties:
+      "^sram-section?@[a-f0-9]+$":
+        type: object
+
+        properties:
+          compatible:
+            oneOf:
+              - const: allwinner,sun4i-a10-sram-a3-a4
+              - const: allwinner,sun4i-a10-sram-c1
+              - const: allwinner,sun4i-a10-sram-d
+              - const: allwinner,sun50i-a64-sram-c
+              - items:
+                - const: allwinner,sun5i-a13-sram-a3-a4
+                - const: allwinner,sun4i-a10-sram-a3-a4
+              - items:
+                - const: allwinner,sun7i-a20-sram-a3-a4
+                - const: allwinner,sun4i-a10-sram-a3-a4
+              - items:
+                - const: allwinner,sun5i-a13-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun7i-a20-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun8i-a23-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun8i-h3-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun50i-a64-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun50i-h5-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun50i-h6-sram-c1
+                - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                - const: allwinner,sun5i-a13-sram-d
+                - const: allwinner,sun4i-a10-sram-d
+              - items:
+                - const: allwinner,sun7i-a20-sram-d
+                - const: allwinner,sun4i-a10-sram-d
+              - items:
+                - const: allwinner,suniv-f1c100s-sram-d
+                - const: allwinner,sun4i-a10-sram-d
+              - items:
+                - const: allwinner,sun50i-h6-sram-c
+                - const: allwinner,sun50i-a64-sram-c
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    system-control@1c00000 {
+      compatible = "allwinner,sun4i-a10-system-control";
+      reg = <0x01c00000 0x30>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      sram_a: sram@00000000 {
+        compatible = "mmio-sram";
+        reg = <0x00000000 0xc000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00000000 0xc000>;
+
+        emac_sram: sram-section@8000 {
+          compatible = "allwinner,sun4i-a10-sram-a3-a4";
+          reg = <0x8000 0x4000>;
+        };
+      };
+    };
diff --git a/dts/Bindings/sram/sram.yaml b/dts/Bindings/sram/sram.yaml
index ee2287a1b1..7b83cc6c9b 100644
--- a/dts/Bindings/sram/sram.yaml
+++ b/dts/Bindings/sram/sram.yaml
@@ -55,7 +55,7 @@ properties:
     type: boolean
 
 patternProperties:
-  "^([a-z]*-)?sram@[a-f0-9]+$":
+  "^([a-z]*-)?sram(-section)?@[a-f0-9]+$":
     type: object
     description:
       Each child of the sram node specifies a region of reserved memory.
@@ -64,15 +64,20 @@ patternProperties:
         description:
           Should contain a vendor specific string in the form
           <vendor>,[<device>-]<usage>
-        enum:
-          - allwinner,sun9i-a80-smp-sram
-          - amlogic,meson8-smp-sram
-          - amlogic,meson8b-smp-sram
-          - renesas,smp-sram
-          - rockchip,rk3066-smp-sram
-          - samsung,exynos4210-sysram
-          - samsung,exynos4210-sysram-ns
-          - socionext,milbeaut-smp-sram
+        contains:
+          enum:
+            - allwinner,sun4i-a10-sram-a3-a4
+            - allwinner,sun4i-a10-sram-c1
+            - allwinner,sun4i-a10-sram-d
+            - allwinner,sun9i-a80-smp-sram
+            - allwinner,sun50i-a64-sram-c
+            - amlogic,meson8-smp-sram
+            - amlogic,meson8b-smp-sram
+            - renesas,smp-sram
+            - rockchip,rk3066-smp-sram
+            - samsung,exynos4210-sysram
+            - samsung,exynos4210-sysram-ns
+            - socionext,milbeaut-smp-sram
 
       reg:
         description:
diff --git a/dts/Bindings/sram/sunxi-sram.txt b/dts/Bindings/sram/sunxi-sram.txt
deleted file mode 100644
index 380246a805..0000000000
--- a/dts/Bindings/sram/sunxi-sram.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-Allwinnner SoC SRAM controllers
------------------------------------------------------
-
-The SRAM controller found on most Allwinner devices is represented by
-a regular node for the SRAM controller itself, with sub-nodes
-reprensenting the SRAM handled by the SRAM controller.
-
-Controller Node
----------------
-
-Required properties:
-- compatible : should be:
-    - "allwinner,sun4i-a10-sram-controller" (deprecated)
-    - "allwinner,sun4i-a10-system-control"
-    - "allwinner,sun5i-a13-system-control"
-    - "allwinner,sun7i-a20-system-control", "allwinner,sun4i-a10-system-control"
-    - "allwinner,sun8i-a23-system-control"
-    - "allwinner,sun8i-h3-system-control"
-    - "allwinner,sun50i-a64-sram-controller" (deprecated)
-    - "allwinner,sun50i-a64-system-control"
-    - "allwinner,sun50i-h5-system-control"
-    - "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"
-    - "allwinner,suniv-f1c100s-system-control", "allwinner,sun4i-a10-system-control"
-- reg : sram controller register offset + length
-
-SRAM nodes
-----------
-
-Each SRAM is described using the mmio-sram bindings documented in
-Documentation/devicetree/bindings/sram/sram.txt
-
-Each SRAM will have SRAM sections that are going to be handled by the
-SRAM controller as subnodes. These sections are represented following
-once again the representation described in the mmio-sram binding.
-
-The valid sections compatible for A10 are:
-    - allwinner,sun4i-a10-sram-a3-a4
-    - allwinner,sun4i-a10-sram-c1
-    - allwinner,sun4i-a10-sram-d
-
-The valid sections compatible for A13 are:
-    - allwinner,sun5i-a13-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4
-    - allwinner,sun5i-a13-sram-c1, allwinner,sun4i-a10-sram-c1
-    - allwinner,sun5i-a13-sram-d, allwinner,sun4i-a10-sram-d
-
-The valid sections compatible for A20 are:
-    - allwinner,sun7i-a20-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4
-    - allwinner,sun7i-a20-sram-c1, allwinner,sun4i-a10-sram-c1
-    - allwinner,sun7i-a20-sram-d, allwinner,sun4i-a10-sram-d
-
-The valid sections compatible for A23/A33 are:
-    - allwinner,sun8i-a23-sram-c1, allwinner,sun4i-a10-sram-c1
-
-The valid sections compatible for H3 are:
-    - allwinner,sun8i-h3-sram-c1, allwinner,sun4i-a10-sram-c1
-
-The valid sections compatible for A64 are:
-    - allwinner,sun50i-a64-sram-c
-    - allwinner,sun50i-a64-sram-c1, allwinner,sun4i-a10-sram-c1
-
-The valid sections compatible for H5 are:
-    - allwinner,sun50i-h5-sram-c1, allwinner,sun4i-a10-sram-c1
-
-The valid sections compatible for H6 are:
-    - allwinner,sun50i-h6-sram-c, allwinner,sun50i-a64-sram-c
-    - allwinner,sun50i-h6-sram-c1, allwinner,sun4i-a10-sram-c1
-
-The valid sections compatible for F1C100s are:
-    - allwinner,suniv-f1c100s-sram-d, allwinner,sun4i-a10-sram-d
-
-Devices using SRAM sections
----------------------------
-
-Some devices need to request to the SRAM controller to map an SRAM for
-their exclusive use.
-
-The relationship between such a device and an SRAM section is
-expressed through the allwinner,sram property, that will take a
-phandle and an argument.
-
-This valid values for this argument are:
-  - 0: CPU
-  - 1: Device
-
-Example
--------
-system-control@1c00000 {
-	compatible = "allwinner,sun4i-a10-system-control";
-	reg = <0x01c00000 0x30>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	sram_a: sram@00000000 {
-		compatible = "mmio-sram";
-		reg = <0x00000000 0xc000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x00000000 0xc000>;
-
-		emac_sram: sram-section@8000 {
-			compatible = "allwinner,sun4i-a10-sram-a3-a4";
-			reg = <0x8000 0x4000>;
-		};
-	};
-};
-
-emac: ethernet@1c0b000 {
-	compatible = "allwinner,sun4i-a10-emac";
-	...
-
-	allwinner,sram = <&emac_sram 1>;
-};
diff --git a/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
new file mode 100644
index 0000000000..87369264fe
--- /dev/null
+++ b/dts/Bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/allwinner,sun8i-a83t-ths.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SUN8I Thermal Controller Device Tree Bindings
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Yangtao Li <tiny.windzz@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun8i-a83t-ths
+      - allwinner,sun8i-h3-ths
+      - allwinner,sun8i-r40-ths
+      - allwinner,sun50i-a64-ths
+      - allwinner,sun50i-h5-ths
+      - allwinner,sun50i-h6-ths
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: bus
+      - const: mod
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: Calibration data for thermal sensors
+
+  nvmem-cell-names:
+    const: calibration
+
+  # See ./thermal.txt for details
+  "#thermal-sensor-cells":
+    enum:
+      - 0
+      - 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-ths
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-h3-ths
+
+    then:
+      properties:
+        "#thermal-sensor-cells":
+          const: 0
+
+    else:
+      properties:
+        "#thermal-sensor-cells":
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: allwinner,sun8i-h3-ths
+              - const: allwinner,sun8i-r40-ths
+              - const: allwinner,sun50i-a64-ths
+              - const: allwinner,sun50i-h5-ths
+              - const: allwinner,sun50i-h6-ths
+
+    then:
+      required:
+        - clocks
+        - clock-names
+        - resets
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor@1f04000 {
+         compatible = "allwinner,sun8i-a83t-ths";
+         reg = <0x01f04000 0x100>;
+         interrupts = <0 31 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <1>;
+    };
+
+  - |
+    thermal-sensor@1c25000 {
+         compatible = "allwinner,sun8i-h3-ths";
+         reg = <0x01c25000 0x400>;
+         clocks = <&ccu 0>, <&ccu 1>;
+         clock-names = "bus", "mod";
+         resets = <&ccu 2>;
+         interrupts = <0 31 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <0>;
+    };
+
+  - |
+    thermal-sensor@5070400 {
+         compatible = "allwinner,sun50i-h6-ths";
+         reg = <0x05070400 0x100>;
+         clocks = <&ccu 0>;
+         clock-names = "bus";
+         resets = <&ccu 2>;
+         interrupts = <0 15 0>;
+         nvmem-cells = <&ths_calibration>;
+         nvmem-cell-names = "calibration";
+         #thermal-sensor-cells = <1>;
+    };
+
+...
diff --git a/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml b/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
new file mode 100644
index 0000000000..d9fdf4809a
--- /dev/null
+++ b/dts/Bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-ro-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AVS ring oscillator thermal
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+
+description: |+
+  The thermal node should be the child of a syscon node with the
+  required property:
+
+  - compatible: Should be one of the following:
+                "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
+
+  Refer to the the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.txt
+
+properties:
+  compatible:
+    const: brcm,bcm2711-thermal
+
+  # See ./thermal.txt for details
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+        avs-monitor@7d5d2000 {
+                compatible = "brcm,bcm2711-avs-monitor",
+                             "syscon", "simple-mfd";
+                reg = <0x7d5d2000 0xf00>;
+
+                thermal: thermal {
+                        compatible = "brcm,bcm2711-thermal";
+                        #thermal-sensor-cells = <0>;
+                };
+        };
+...
diff --git a/dts/Bindings/thermal/brcm,avs-tmon.txt b/dts/Bindings/thermal/brcm,avs-tmon.txt
index 43a9ed5459..74a9ef09db 100644
--- a/dts/Bindings/thermal/brcm,avs-tmon.txt
+++ b/dts/Bindings/thermal/brcm,avs-tmon.txt
@@ -3,9 +3,13 @@
 Thermal management core, provided by the AVS TMON hardware block.
 
 Required properties:
-- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
+- compatible: must be one of:
+	"brcm,avs-tmon-bcm7216"
+	"brcm,avs-tmon-bcm7445"
+	"brcm,avs-tmon"
 - reg: address range for the AVS TMON registers
-- interrupts: temperature monitor interrupt, for high/low threshold triggers
+- interrupts: temperature monitor interrupt, for high/low threshold triggers,
+	      required except for "brcm,avs-tmon-bcm7216"
 - interrupt-names: should be "tmon"
 
 Example:
diff --git a/dts/Bindings/timer/arm,arch_timer_mmio.yaml b/dts/Bindings/timer/arm,arch_timer_mmio.yaml
index b3f0fe96ff..102f319833 100644
--- a/dts/Bindings/timer/arm,arch_timer_mmio.yaml
+++ b/dts/Bindings/timer/arm,arch_timer_mmio.yaml
@@ -99,22 +99,22 @@ examples:
       compatible = "arm,armv7-timer-mem";
       #address-cells = <1>;
       #size-cells = <1>;
-      ranges;
+      ranges = <0 0xf0001000 0x1000>;
       reg = <0xf0000000 0x1000>;
       clock-frequency = <50000000>;
 
-      frame@f0001000 {
+      frame@0 {
         frame-number = <0>;
         interrupts = <0 13 0x8>,
                <0 14 0x8>;
-        reg = <0xf0001000 0x1000>,
-              <0xf0002000 0x1000>;
+        reg = <0x0000 0x1000>,
+              <0x1000 0x1000>;
       };
 
-      frame@f0003000 {
+      frame@2000 {
         frame-number = <1>;
         interrupts = <0 15 0x8>;
-        reg = <0xf0003000 0x1000>;
+        reg = <0x2000 0x1000>;
       };
     };
 
diff --git a/dts/Bindings/timer/renesas,cmt.txt b/dts/Bindings/timer/renesas,cmt.txt
index a444cfc585..a747fabab7 100644
--- a/dts/Bindings/timer/renesas,cmt.txt
+++ b/dts/Bindings/timer/renesas,cmt.txt
@@ -29,6 +29,8 @@ Required Properties:
     - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470.
     - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1.
     - "renesas,r8a774a1-cmt1" for the 48-bit CMT devices included in r8a774a1.
+    - "renesas,r8a774b1-cmt0" for the 32-bit CMT0 device included in r8a774b1.
+    - "renesas,r8a774b1-cmt1" for the 48-bit CMT devices included in r8a774b1.
     - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0.
     - "renesas,r8a774c0-cmt1" for the 48-bit CMT devices included in r8a774c0.
     - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
diff --git a/dts/Bindings/timer/renesas,tmu.txt b/dts/Bindings/timer/renesas,tmu.txt
index 9dff7e5cae..29159f4e65 100644
--- a/dts/Bindings/timer/renesas,tmu.txt
+++ b/dts/Bindings/timer/renesas,tmu.txt
@@ -11,6 +11,7 @@ Required Properties:
   - compatible: must contain one or more of the following:
     - "renesas,tmu-r8a7740" for the r8a7740 TMU
     - "renesas,tmu-r8a774a1" for the r8a774A1 TMU
+    - "renesas,tmu-r8a774b1" for the r8a774B1 TMU
     - "renesas,tmu-r8a774c0" for the r8a774C0 TMU
     - "renesas,tmu-r8a7778" for the r8a7778 TMU
     - "renesas,tmu-r8a7779" for the r8a7779 TMU
diff --git a/dts/Bindings/trivial-devices.yaml b/dts/Bindings/trivial-devices.yaml
index 765fd1c170..978de7d37c 100644
--- a/dts/Bindings/trivial-devices.yaml
+++ b/dts/Bindings/trivial-devices.yaml
@@ -104,6 +104,10 @@ properties:
           - infineon,slb9645tt
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
+            # Infineon Multi-phase Digital VR Controller xdpe12254
+          - infineon,xdpe12254
+            # Infineon Multi-phase Digital VR Controller xdpe12284
+          - infineon,xdpe12284
             # Inspur Power System power supply unit version 1
           - inspur,ipsps1
             # Intersil ISL29028 Ambient Light and Proximity Sensor
@@ -132,6 +136,8 @@ properties:
           - maxim,max6621
             # 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
           - maxim,max6625
+            # 3-Channel Remote Temperature Sensor
+          - maxim,max31730
             # mCube 3-axis 8-bit digital accelerometer
           - mcube,mc3230
             # MEMSIC 2-axis 8-bit digital accelerometer
@@ -354,6 +360,10 @@ properties:
           - ti,tmp103
             # Digital Temperature Sensor
           - ti,tmp275
+            # TI Dual channel DCAP+ multiphase controller TPS53679
+          - ti,tps53679
+            # TI Dual channel DCAP+ multiphase controller TPS53688
+          - ti,tps53688
             # Winbond/Nuvoton H/W Monitor
           - winbond,w83793
             # i2c trusted platform module (TPM)
diff --git a/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 4efb77b653..267fce1659 100644
--- a/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/dts/Bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -107,7 +107,7 @@ examples:
               reg = <0xff400000 0x40000>;
               interrupts = <31>;
               clocks = <&clkc_usb1>;
-              clock-names = "ddr";
+              clock-names = "otg";
               phys = <&usb2_phy1>;
               dr_mode = "peripheral";
               g-rx-fifo-size = <192>;
diff --git a/dts/Bindings/usb/ci-hdrc-usb2.txt b/dts/Bindings/usb/ci-hdrc-usb2.txt
index cfc9f40ab6..51376cbe5f 100644
--- a/dts/Bindings/usb/ci-hdrc-usb2.txt
+++ b/dts/Bindings/usb/ci-hdrc-usb2.txt
@@ -15,6 +15,10 @@ Required properties:
 	"qcom,ci-hdrc"
 	"chipidea,usb2"
 	"xlnx,zynq-usb-2.20a"
+	"nvidia,tegra20-udc"
+	"nvidia,tegra30-udc"
+	"nvidia,tegra114-udc"
+	"nvidia,tegra124-udc"
 - reg: base address and length of the registers
 - interrupts: interrupt for the USB controller
 
diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt
deleted file mode 100644
index aafff3a690..0000000000
--- a/dts/Bindings/usb/dwc2.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Platform DesignWare HS OTG USB 2.0 controller
------------------------------------------------------
-
-Required properties:
-- compatible : One of:
-  - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
-  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
-  - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
-  - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
-  - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
-  - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
-  - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
-  - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
-  - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
-  - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
-  - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
-  - "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs;
-  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
-  - snps,dwc2: A generic DWC2 USB controller with default parameters.
-  - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
-  configured in FS mode;
-  - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
-  configured in HS mode;
-  - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
-    configured in HS mode;
-- reg : Should contain 1 register range (address and length)
-- interrupts : Should contain 1 interrupt
-- clocks: clock provider specifier
-- clock-names: shall be "otg"
-Refer to clk/clock-bindings.txt for generic clock consumer properties
-
-Optional properties:
-- phys: phy provider specifier
-- phy-names: shall be "usb2-phy"
-- vbus-supply: reference to the VBUS regulator. Depending on the current mode
-  this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
-  regulator is updated if the controller is configured in "otg" mode and the
-  status changes between "host" and "peripheral".
-Refer to phy/phy-bindings.txt for generic phy consumer properties
-- dr_mode: shall be one of "host", "peripheral" and "otg"
-  Refer to usb/generic.txt
-- g-rx-fifo-size: size of rx fifo size in gadget mode.
-- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
-- snps,need-phy-for-wake: If present indicates that the phy needs to be left
-                          on for remote wakeup during suspend.
-- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
-                          we detect a wakeup.  This is due to a hardware errata.
-
-Deprecated properties:
-- g-use-dma: gadget DMA mode is automatically detected
-
-Example:
-
-        usb@101c0000 {
-                compatible = "ralink,rt3050-usb, snps,dwc2";
-                reg = <0x101c0000 40000>;
-                interrupts = <18>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		snps,need-phy-for-wake;
-        };
diff --git a/dts/Bindings/usb/dwc2.yaml b/dts/Bindings/usb/dwc2.yaml
new file mode 100644
index 0000000000..71cf7ba322
--- /dev/null
+++ b/dts/Bindings/usb/dwc2.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare HS OTG USB 2.0 controller Bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm2835-usb
+      - const: hisilicon,hi6220-usb
+      - items:
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,px30-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3036-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rv1108-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3188-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3228-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - items:
+          - const: rockchip,rk3288-usb
+          - const: rockchip,rk3066-usb
+          - const: snps,dwc2
+      - const: lantiq,arx100-usb
+      - const: lantiq,xrx200-usb
+      - items:
+          - const: amlogic,meson8-usb
+          - const: snps,dwc2
+      - items:
+          - const: amlogic,meson8b-usb
+          - const: snps,dwc2
+      - const: amlogic,meson-gxbb-usb
+      - items:
+          - const: amlogic,meson-g12a-usb
+          - const: snps,dwc2
+      - const: amcc,dwc-otg
+      - const: snps,dwc2
+      - const: st,stm32f4x9-fsotg
+      - const: st,stm32f4x9-hsotg
+      - const: st,stm32f7-hsotg
+      - const: samsung,s3c6400-hsotg
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: otg
+
+  resets:
+    items:
+     - description: common reset
+     - description: ecc reset
+    minItems: 1
+
+  reset-names:
+    items:
+     - const: dwc2
+     - const: dwc2-ecc
+    minItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb2-phy
+
+  vbus-supply:
+    description: reference to the VBUS regulator. Depending on the current mode
+      this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
+      regulator is updated if the controller is configured in "otg" mode and the
+      status changes between "host" and "peripheral".
+
+  vusb_d-supply:
+    description: phandle to voltage regulator of digital section,
+
+  vusb_a-supply:
+    description: phandle to voltage regulator of analog section.
+
+  dr_mode:
+    enum: [host, peripheral, otg]
+
+  g-rx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size of rx fifo size in gadget mode.
+
+  g-np-tx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: size of non-periodic tx fifo size in gadget mode.
+
+  g-tx-fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+  snps,need-phy-for-wake:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+
+  snps,reset-phy-on-wake:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If present indicates that we need to reset the PHY when we detect a wakeup.
+                 This is due to a hardware errata.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+      usb@101c0000 {
+        compatible = "rockchip,rk3066-usb", "snps,dwc2";
+        reg = <0x10180000 0x40000>;
+        interrupts = <18>;
+        clocks = <&usb_otg_ahb_clk>;
+        clock-names = "otg";
+        phys = <&usbphy>;
+        phy-names = "usb2-phy";
+      };
+
+...
diff --git a/dts/Bindings/usb/generic.txt b/dts/Bindings/usb/generic.txt
index cf5a1ad456..e6790d2a4d 100644
--- a/dts/Bindings/usb/generic.txt
+++ b/dts/Bindings/usb/generic.txt
@@ -2,10 +2,11 @@ Generic USB Properties
 
 Optional properties:
  - maximum-speed: tells USB controllers we want to work up to a certain
-			speed. Valid arguments are "super-speed", "high-speed",
-			"full-speed" and "low-speed". In case this isn't passed
-			via DT, USB controllers should default to their maximum
-			HW capability.
+			speed. Valid arguments are "super-speed-plus",
+			"super-speed", "high-speed", "full-speed" and
+			"low-speed". In case this isn't passed via DT, USB
+			controllers should default to their maximum HW
+			capability.
  - dr_mode: tells Dual-Role USB controllers that we want to work on a
 			particular mode. Valid arguments are "host",
 			"peripheral" and "otg". In case this attribute isn't
diff --git a/dts/Bindings/usb/mediatek,musb.txt b/dts/Bindings/usb/mediatek,musb.txt
new file mode 100644
index 0000000000..2b8a87c90d
--- /dev/null
+++ b/dts/Bindings/usb/mediatek,musb.txt
@@ -0,0 +1,57 @@
+MediaTek musb DRD/OTG controller
+-------------------------------------------
+
+Required properties:
+ - compatible      : should be one of:
+                     "mediatek,mt2701-musb"
+                     ...
+                     followed by "mediatek,mtk-musb"
+ - reg             : specifies physical base address and size of
+                     the registers
+ - interrupts      : interrupt used by musb controller
+ - interrupt-names : must be "mc"
+ - phys            : PHY specifier for the OTG phy
+ - dr_mode         : should be one of "host", "peripheral" or "otg",
+                     refer to usb/generic.txt
+ - clocks          : a list of phandle + clock-specifier pairs, one for
+                     each entry in clock-names
+ - clock-names     : must contain "main", "mcu", "univpll"
+                     for clocks of controller
+
+Optional properties:
+ - power-domains   : a phandle to USB power domain node to control USB's
+                     MTCMOS
+
+Required child nodes:
+ usb connector node as defined in bindings/connector/usb-connector.txt
+Optional properties:
+ - id-gpios        : input GPIO for USB ID pin.
+ - vbus-gpios      : input GPIO for USB VBUS pin.
+ - vbus-supply     : reference to the VBUS regulator, needed when supports
+                     dual-role mode
+ - usb-role-switch : use USB Role Switch to support dual-role switch, see
+                     usb/generic.txt.
+
+Example:
+
+usb2: usb@11200000 {
+	compatible = "mediatek,mt2701-musb",
+		     "mediatek,mtk-musb";
+	reg = <0 0x11200000 0 0x1000>;
+	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-names = "mc";
+	phys = <&u2port2 PHY_TYPE_USB2>;
+	dr_mode = "otg";
+	clocks = <&pericfg CLK_PERI_USB0>,
+		 <&pericfg CLK_PERI_USB0_MCU>,
+		 <&pericfg CLK_PERI_USB_SLV>;
+	clock-names = "main","mcu","univpll";
+	power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+	usb-role-switch;
+	connector{
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_vbus>;
+	};
+};
diff --git a/dts/Bindings/vendor-prefixes.yaml b/dts/Bindings/vendor-prefixes.yaml
index 6046f45558..9e67944bec 100644
--- a/dts/Bindings/vendor-prefixes.yaml
+++ b/dts/Bindings/vendor-prefixes.yaml
@@ -109,6 +109,8 @@ patternProperties:
     description: Artesyn Embedded Technologies Inc.
   "^asahi-kasei,.*":
     description: Asahi Kasei Corp.
+  "^asc,.*":
+    description: All Sensors Corporation
   "^aspeed,.*":
     description: ASPEED Technology Inc.
   "^asus,.*":
@@ -149,6 +151,8 @@ patternProperties:
     description: Bosch Sensortec GmbH
   "^boundary,.*":
     description: Boundary Devices Inc.
+  "^broadmobi,.*":
+    description: Shanghai Broadmobi Communication Technology Co.,Ltd.
   "^brcm,.*":
     description: Broadcom Corporation
   "^buffalo,.*":
@@ -157,6 +161,8 @@ patternProperties:
     description: B&R Industrial Automation GmbH
   "^bticino,.*":
     description: Bticino International
+  "^calaosystems,.*":
+    description: CALAO Systems SAS
   "^calxeda,.*":
     description: Calxeda
   "^capella,.*":
@@ -475,6 +481,8 @@ patternProperties:
     description: Shenzhen Jesurun Electronics Business Dept.
   "^jianda,.*":
     description: Jiandangjing Technology Co., Ltd.
+  "^kam,.*":
+    description: Kamstrup A/S
   "^karo,.*":
     description: Ka-Ro electronics GmbH
   "^keithkoep,.*":
@@ -513,6 +521,8 @@ patternProperties:
     description: Lantiq Semiconductor
   "^lattice,.*":
     description: Lattice Semiconductor
+  "^leadtek,.*":
+    description: Shenzhen Leadtek Technology Co., Ltd.
   "^leez,.*":
     description: Leez
   "^lego,.*":
@@ -545,6 +555,8 @@ patternProperties:
     description: Logic PD, Inc.
   "^longcheer,.*":
     description: Longcheer Technology (Shanghai) Co., Ltd.
+  "^loongson,.*":
+    description: Loongson Technology Corporation Limited
   "^lsi,.*":
     description: LSI Corp. (LSI Logic)
   "^lwn,.*":
@@ -613,6 +625,8 @@ patternProperties:
     description: Moxa Inc.
   "^mpl,.*":
     description: MPL AG
+  "^mps,.*":
+    description: Monolithic Power Systems Inc.
   "^mqmaker,.*":
     description: mqmaker Inc.
   "^mscc,.*":
@@ -717,6 +731,8 @@ patternProperties:
     description: Panasonic Corporation
   "^parade,.*":
     description: Parade Technologies Inc.
+  "^parallax,.*":
+    description: Parallax Inc.
   "^pda,.*":
     description: Precision Design Associates, Inc.
   "^pericom,.*":
@@ -823,6 +839,8 @@ patternProperties:
     description: Sancloud Ltd
   "^sandisk,.*":
     description: Sandisk Corporation
+  "^satoz,.*":
+    description: Satoz International Co., Ltd
   "^sbs,.*":
     description: Smart Battery System
   "^schindler,.*":
@@ -911,8 +929,12 @@ patternProperties:
     description: Startek
   "^ste,.*":
     description: ST-Ericsson
+    deprecated: true
   "^stericsson,.*":
     description: ST-Ericsson
+  "^st-ericsson,.*":
+    description: ST-Ericsson
+    deprecated: true
   "^summit,.*":
     description: Summit microelectronics
   "^sunchip,.*":
@@ -1012,6 +1034,8 @@ patternProperties:
     description: Variscite Ltd.
   "^via,.*":
     description: VIA Technologies, Inc.
+  "^videostrong,.*":
+    description: Videostrong Technology Co., Ltd.
   "^virtio,.*":
     description: Virtual I/O Device Specification, developed by the OASIS consortium
   "^vishay,.*":
@@ -1056,10 +1080,16 @@ patternProperties:
     description: Extreme Engineering Solutions (X-ES)
   "^xillybus,.*":
     description: Xillybus Ltd.
+  "^xinpeng,.*":
+    description: Shenzhen Xinpeng Technology Co., Ltd
   "^xlnx,.*":
     description: Xilinx
   "^xunlong,.*":
     description: Shenzhen Xunlong Software CO.,Limited
+  "^xylon,.*":
+    description: Xylon
+  "^yna,.*":
+    description: YSH & ATIL
   "^yones-toptech,.*":
     description: Yones Toptech Co., Ltd.
   "^ysoft,.*":
diff --git a/dts/Bindings/watchdog/da9062-wdt.txt b/dts/Bindings/watchdog/da9062-wdt.txt
index b935b526d2..950e4fba8d 100644
--- a/dts/Bindings/watchdog/da9062-wdt.txt
+++ b/dts/Bindings/watchdog/da9062-wdt.txt
@@ -6,6 +6,11 @@ Required properties:
 	"dlg,da9061-watchdog", "dlg,da9062-watchdog"
 	"dlg,da9062-watchdog"
 
+Optional properties:
+- dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
+	Only use this option if you can't use the watchdog automatic suspend
+	function during a suspend (see register CONTROL_B).
+
 Example: DA9062
 
 	pmic0: da9062@58 {
diff --git a/dts/Bindings/watchdog/mtk-wdt.txt b/dts/Bindings/watchdog/mtk-wdt.txt
index fd380eb28d..4dd36bd3f1 100644
--- a/dts/Bindings/watchdog/mtk-wdt.txt
+++ b/dts/Bindings/watchdog/mtk-wdt.txt
@@ -4,22 +4,27 @@ Required properties:
 
 - compatible should contain:
 	"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
+	"mediatek,mt2712-wdt", "mediatek,mt6589-wdt": for MT2712
 	"mediatek,mt6589-wdt": for MT6589
 	"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
+	"mediatek,mt8183-wdt", "mediatek,mt6589-wdt": for MT8183
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 
 - reg : Specifies base physical address and size of the registers.
 
 Optional properties:
 - timeout-sec: contains the watchdog timeout in seconds.
+- #reset-cells: Should be 1.
 
 Example:
 
-wdt: watchdog@10000000 {
-	compatible = "mediatek,mt6589-wdt";
-	reg = <0x10000000 0x18>;
+watchdog: watchdog@10007000 {
+	compatible = "mediatek,mt8183-wdt",
+		     "mediatek,mt6589-wdt";
+	reg = <0 0x10007000 0 0x100>;
 	timeout-sec = <10>;
+	#reset-cells = <1>;
 };
diff --git a/dts/Bindings/watchdog/renesas,wdt.txt b/dts/Bindings/watchdog/renesas,wdt.txt
index a5bf04dba4..79b3c62f18 100644
--- a/dts/Bindings/watchdog/renesas,wdt.txt
+++ b/dts/Bindings/watchdog/renesas,wdt.txt
@@ -19,6 +19,7 @@ Required properties:
 	         - "renesas,r8a7794-wdt" (R-Car E2)
 	         - "renesas,r8a7795-wdt" (R-Car H3)
 	         - "renesas,r8a7796-wdt" (R-Car M3-W)
+	         - "renesas,r8a77961-wdt" (R-Car M3-W+)
 		 - "renesas,r8a77965-wdt" (R-Car M3-N)
 	         - "renesas,r8a77970-wdt" (R-Car V3M)
 	         - "renesas,r8a77990-wdt" (R-Car E3)
diff --git a/dts/Bindings/watchdog/st,stm32-iwdg.txt b/dts/Bindings/watchdog/st,stm32-iwdg.txt
deleted file mode 100644
index d8f4430b0a..0000000000
--- a/dts/Bindings/watchdog/st,stm32-iwdg.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-STM32 Independent WatchDoG (IWDG)
----------------------------------
-
-Required properties:
-- compatible: Should be either:
-  - "st,stm32-iwdg"
-  - "st,stm32mp1-iwdg"
-- reg: Physical base address and length of the registers set for the device
-- clocks: Reference to the clock entry lsi. Additional pclk clock entry
-  is required only for st,stm32mp1-iwdg.
-- clock-names: Name of the clocks used.
-  "lsi" for st,stm32-iwdg
-  "lsi", "pclk" for st,stm32mp1-iwdg
-
-Optional Properties:
-- timeout-sec: Watchdog timeout value in seconds.
-
-Example:
-
-iwdg: watchdog@40003000 {
-	compatible = "st,stm32-iwdg";
-	reg = <0x40003000 0x400>;
-	clocks = <&clk_lsi>;
-	clock-names = "lsi";
-	timeout-sec = <32>;
-};
diff --git a/dts/Bindings/watchdog/st,stm32-iwdg.yaml b/dts/Bindings/watchdog/st,stm32-iwdg.yaml
new file mode 100644
index 0000000000..a27c504e2e
--- /dev/null
+++ b/dts/Bindings/watchdog/st,stm32-iwdg.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/st,stm32-iwdg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Independent WatchDoG (IWDG) bindings
+
+maintainers:
+  - Yannick Fertre <yannick.fertre@st.com>
+  - Christophe Roullier <christophe.roullier@st.com>
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - st,stm32-iwdg
+      - st,stm32mp1-iwdg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Low speed clock
+      - description: Optional peripheral clock
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      enum:
+        - lsi
+        - pclk
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    watchdog@5a002000 {
+      compatible = "st,stm32mp1-iwdg";
+      reg = <0x5a002000 0x400>;
+      clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+      clock-names = "pclk", "lsi";
+      timeout-sec = <32>;
+    };
+
+...
diff --git a/dts/include/dt-bindings/clock/dra7.h b/dts/include/dt-bindings/clock/dra7.h
index 72f2e84115..8cec5a1e18 100644
--- a/dts/include/dt-bindings/clock/dra7.h
+++ b/dts/include/dt-bindings/clock/dra7.h
@@ -29,6 +29,16 @@
 #define DRA7_RTC_CLKCTRL_INDEX(offset)	((offset) - DRA7_RTC_CLKCTRL_OFFSET)
 #define DRA7_RTCSS_CLKCTRL	DRA7_RTC_CLKCTRL_INDEX(0x44)
 
+/* vip clocks */
+#define DRA7_VIP1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_VIP2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
+#define DRA7_VIP3_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
+
+/* vpe clocks */
+#define DRA7_VPE_CLKCTRL_OFFSET	0x60
+#define DRA7_VPE_CLKCTRL_INDEX(offset)	((offset) - DRA7_VPE_CLKCTRL_OFFSET)
+#define DRA7_VPE_CLKCTRL	DRA7_VPE_CLKCTRL_INDEX(0x64)
+
 /* coreaon clocks */
 #define DRA7_SMARTREFLEX_MPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 #define DRA7_SMARTREFLEX_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x38)
@@ -78,6 +88,9 @@
 #define DRA7_DSS_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 #define DRA7_BB2D_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
 
+/* gpu clocks */
+#define DRA7_GPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
+
 /* l3init clocks */
 #define DRA7_MMC1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 #define DRA7_MMC2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
@@ -192,6 +205,16 @@
 /* rtc clocks */
 #define DRA7_RTC_RTCSS_CLKCTRL	DRA7_CLKCTRL_INDEX(0x44)
 
+/* vip clocks */
+#define DRA7_CAM_VIP1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_CAM_VIP2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
+#define DRA7_CAM_VIP3_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
+
+/* vpe clocks */
+#define DRA7_VPE_CLKCTRL_OFFSET	0x60
+#define DRA7_VPE_CLKCTRL_INDEX(offset)	((offset) - DRA7_VPE_CLKCTRL_OFFSET)
+#define DRA7_VPE_VPE_CLKCTRL	DRA7_VPE_CLKCTRL_INDEX(0x64)
+
 /* coreaon clocks */
 #define DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 #define DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x38)
diff --git a/dts/include/dt-bindings/clock/imx8mp-clock.h b/dts/include/dt-bindings/clock/imx8mp-clock.h
new file mode 100644
index 0000000000..2fab63186b
--- /dev/null
+++ b/dts/include/dt-bindings/clock/imx8mp-clock.h
@@ -0,0 +1,300 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX8MP_H
+#define __DT_BINDINGS_CLOCK_IMX8MP_H
+
+#define IMX8MP_CLK_DUMMY			0
+#define IMX8MP_CLK_32K				1
+#define IMX8MP_CLK_24M				2
+#define IMX8MP_OSC_HDMI_CLK			3
+#define IMX8MP_CLK_EXT1				4
+#define IMX8MP_CLK_EXT2				5
+#define IMX8MP_CLK_EXT3				6
+#define IMX8MP_CLK_EXT4				7
+#define IMX8MP_AUDIO_PLL1_REF_SEL		8
+#define IMX8MP_AUDIO_PLL2_REF_SEL		9
+#define IMX8MP_VIDEO_PLL1_REF_SEL		10
+#define IMX8MP_DRAM_PLL_REF_SEL			11
+#define IMX8MP_GPU_PLL_REF_SEL			12
+#define IMX8MP_VPU_PLL_REF_SEL			13
+#define IMX8MP_ARM_PLL_REF_SEL			14
+#define IMX8MP_SYS_PLL1_REF_SEL			15
+#define IMX8MP_SYS_PLL2_REF_SEL			16
+#define IMX8MP_SYS_PLL3_REF_SEL			17
+#define IMX8MP_AUDIO_PLL1			18
+#define IMX8MP_AUDIO_PLL2			19
+#define IMX8MP_VIDEO_PLL1			20
+#define IMX8MP_DRAM_PLL				21
+#define IMX8MP_GPU_PLL				22
+#define IMX8MP_VPU_PLL				23
+#define IMX8MP_ARM_PLL				24
+#define IMX8MP_SYS_PLL1				25
+#define IMX8MP_SYS_PLL2				26
+#define IMX8MP_SYS_PLL3				27
+#define IMX8MP_AUDIO_PLL1_BYPASS		28
+#define IMX8MP_AUDIO_PLL2_BYPASS		29
+#define IMX8MP_VIDEO_PLL1_BYPASS		30
+#define IMX8MP_DRAM_PLL_BYPASS			31
+#define IMX8MP_GPU_PLL_BYPASS			32
+#define IMX8MP_VPU_PLL_BYPASS			33
+#define IMX8MP_ARM_PLL_BYPASS			34
+#define IMX8MP_SYS_PLL1_BYPASS			35
+#define IMX8MP_SYS_PLL2_BYPASS			36
+#define IMX8MP_SYS_PLL3_BYPASS			37
+#define IMX8MP_AUDIO_PLL1_OUT			38
+#define IMX8MP_AUDIO_PLL2_OUT			39
+#define IMX8MP_VIDEO_PLL1_OUT			40
+#define IMX8MP_DRAM_PLL_OUT			41
+#define IMX8MP_GPU_PLL_OUT			42
+#define IMX8MP_VPU_PLL_OUT			43
+#define IMX8MP_ARM_PLL_OUT			44
+#define IMX8MP_SYS_PLL1_OUT			45
+#define IMX8MP_SYS_PLL2_OUT			46
+#define IMX8MP_SYS_PLL3_OUT			47
+#define IMX8MP_SYS_PLL1_40M			48
+#define IMX8MP_SYS_PLL1_80M			49
+#define IMX8MP_SYS_PLL1_100M			50
+#define IMX8MP_SYS_PLL1_133M			51
+#define IMX8MP_SYS_PLL1_160M			52
+#define IMX8MP_SYS_PLL1_200M			53
+#define IMX8MP_SYS_PLL1_266M			54
+#define IMX8MP_SYS_PLL1_400M			55
+#define IMX8MP_SYS_PLL1_800M			56
+#define IMX8MP_SYS_PLL2_50M			57
+#define IMX8MP_SYS_PLL2_100M			58
+#define IMX8MP_SYS_PLL2_125M			59
+#define IMX8MP_SYS_PLL2_166M			60
+#define IMX8MP_SYS_PLL2_200M			61
+#define IMX8MP_SYS_PLL2_250M			62
+#define IMX8MP_SYS_PLL2_333M			63
+#define IMX8MP_SYS_PLL2_500M			64
+#define IMX8MP_SYS_PLL2_1000M			65
+#define IMX8MP_CLK_A53_SRC			66
+#define IMX8MP_CLK_M7_SRC			67
+#define IMX8MP_CLK_ML_SRC			68
+#define IMX8MP_CLK_GPU3D_CORE_SRC		69
+#define IMX8MP_CLK_GPU3D_SHADER_SRC		70
+#define IMX8MP_CLK_GPU2D_SRC			71
+#define IMX8MP_CLK_AUDIO_AXI_SRC		72
+#define IMX8MP_CLK_HSIO_AXI_SRC			73
+#define IMX8MP_CLK_MEDIA_ISP_SRC		74
+#define IMX8MP_CLK_A53_CG			75
+#define IMX8MP_CLK_M4_CG			76
+#define IMX8MP_CLK_ML_CG			77
+#define IMX8MP_CLK_GPU3D_CORE_CG		78
+#define IMX8MP_CLK_GPU3D_SHADER_CG		79
+#define IMX8MP_CLK_GPU2D_CG			80
+#define IMX8MP_CLK_AUDIO_AXI_CG			81
+#define IMX8MP_CLK_HSIO_AXI_CG			82
+#define IMX8MP_CLK_MEDIA_ISP_CG			83
+#define IMX8MP_CLK_A53_DIV			84
+#define IMX8MP_CLK_M7_DIV			85
+#define IMX8MP_CLK_ML_DIV			86
+#define IMX8MP_CLK_GPU3D_CORE_DIV		87
+#define IMX8MP_CLK_GPU3D_SHADER_DIV		88
+#define IMX8MP_CLK_GPU2D_DIV			89
+#define IMX8MP_CLK_AUDIO_AXI_DIV		90
+#define IMX8MP_CLK_HSIO_AXI_DIV			91
+#define IMX8MP_CLK_MEDIA_ISP_DIV		92
+#define IMX8MP_CLK_MAIN_AXI			93
+#define IMX8MP_CLK_ENET_AXI			94
+#define IMX8MP_CLK_NAND_USDHC_BUS		95
+#define IMX8MP_CLK_VPU_BUS			96
+#define IMX8MP_CLK_MEDIA_AXI			97
+#define IMX8MP_CLK_MEDIA_APB			98
+#define IMX8MP_CLK_HDMI_APB			99
+#define IMX8MP_CLK_HDMI_AXI			100
+#define IMX8MP_CLK_GPU_AXI			101
+#define IMX8MP_CLK_GPU_AHB			102
+#define IMX8MP_CLK_NOC				103
+#define IMX8MP_CLK_NOC_IO			104
+#define IMX8MP_CLK_ML_AXI			105
+#define IMX8MP_CLK_ML_AHB			106
+#define IMX8MP_CLK_AHB				107
+#define IMX8MP_CLK_AUDIO_AHB			108
+#define IMX8MP_CLK_MIPI_DSI_ESC_RX		109
+#define IMX8MP_CLK_IPG_ROOT			110
+#define IMX8MP_CLK_IPG_AUDIO_ROOT		111
+#define IMX8MP_CLK_DRAM_ALT			112
+#define IMX8MP_CLK_DRAM_APB			113
+#define IMX8MP_CLK_VPU_G1			114
+#define IMX8MP_CLK_VPU_G2			115
+#define IMX8MP_CLK_CAN1				116
+#define IMX8MP_CLK_CAN2				117
+#define IMX8MP_CLK_MEMREPAIR			118
+#define IMX8MP_CLK_PCIE_PHY			119
+#define IMX8MP_CLK_PCIE_AUX			120
+#define IMX8MP_CLK_I2C5				121
+#define IMX8MP_CLK_I2C6				122
+#define IMX8MP_CLK_SAI1				123
+#define IMX8MP_CLK_SAI2				124
+#define IMX8MP_CLK_SAI3				125
+#define IMX8MP_CLK_SAI4				126
+#define IMX8MP_CLK_SAI5				127
+#define IMX8MP_CLK_SAI6				128
+#define IMX8MP_CLK_ENET_QOS			129
+#define IMX8MP_CLK_ENET_QOS_TIMER		130
+#define IMX8MP_CLK_ENET_REF			131
+#define IMX8MP_CLK_ENET_TIMER			132
+#define IMX8MP_CLK_ENET_PHY_REF			133
+#define IMX8MP_CLK_NAND				134
+#define IMX8MP_CLK_QSPI				135
+#define IMX8MP_CLK_USDHC1			136
+#define IMX8MP_CLK_USDHC2			137
+#define IMX8MP_CLK_I2C1				138
+#define IMX8MP_CLK_I2C2				139
+#define IMX8MP_CLK_I2C3				140
+#define IMX8MP_CLK_I2C4				141
+#define IMX8MP_CLK_UART1			142
+#define IMX8MP_CLK_UART2			143
+#define IMX8MP_CLK_UART3			144
+#define IMX8MP_CLK_UART4			145
+#define IMX8MP_CLK_USB_CORE_REF			146
+#define IMX8MP_CLK_USB_PHY_REF			147
+#define IMX8MP_CLK_GIC				148
+#define IMX8MP_CLK_ECSPI1			149
+#define IMX8MP_CLK_ECSPI2			150
+#define IMX8MP_CLK_PWM1				151
+#define IMX8MP_CLK_PWM2				152
+#define IMX8MP_CLK_PWM3				153
+#define IMX8MP_CLK_PWM4				154
+#define IMX8MP_CLK_GPT1				155
+#define IMX8MP_CLK_GPT2				156
+#define IMX8MP_CLK_GPT3				157
+#define IMX8MP_CLK_GPT4				158
+#define IMX8MP_CLK_GPT5				159
+#define IMX8MP_CLK_GPT6				160
+#define IMX8MP_CLK_TRACE			161
+#define IMX8MP_CLK_WDOG				162
+#define IMX8MP_CLK_WRCLK			163
+#define IMX8MP_CLK_IPP_DO_CLKO1			164
+#define IMX8MP_CLK_IPP_DO_CLKO2			165
+#define IMX8MP_CLK_HDMI_FDCC_TST		166
+#define IMX8MP_CLK_HDMI_27M			167
+#define IMX8MP_CLK_HDMI_REF_266M		168
+#define IMX8MP_CLK_USDHC3			169
+#define IMX8MP_CLK_MEDIA_CAM1_PIX		170
+#define IMX8MP_CLK_MEDIA_MIPI_PHY1_REF		171
+#define IMX8MP_CLK_MEDIA_DISP1_PIX		172
+#define IMX8MP_CLK_MEDIA_CAM2_PIX		173
+#define IMX8MP_CLK_MEDIA_MIPI_PHY2_REF		174
+#define IMX8MP_CLK_MEDIA_MIPI_CSI2_ESC		175
+#define IMX8MP_CLK_PCIE2_CTRL			176
+#define IMX8MP_CLK_PCIE2_PHY			177
+#define IMX8MP_CLK_MEDIA_MIPI_TEST_BYTE		178
+#define IMX8MP_CLK_ECSPI3			179
+#define IMX8MP_CLK_PDM				180
+#define IMX8MP_CLK_VPU_VC8000E			181
+#define IMX8MP_CLK_SAI7				182
+#define IMX8MP_CLK_GPC_ROOT			183
+#define IMX8MP_CLK_ANAMIX_ROOT			184
+#define IMX8MP_CLK_CPU_ROOT			185
+#define IMX8MP_CLK_CSU_ROOT			186
+#define IMX8MP_CLK_DEBUG_ROOT			187
+#define IMX8MP_CLK_DRAM1_ROOT			188
+#define IMX8MP_CLK_ECSPI1_ROOT			189
+#define IMX8MP_CLK_ECSPI2_ROOT			190
+#define IMX8MP_CLK_ECSPI3_ROOT			191
+#define IMX8MP_CLK_ENET1_ROOT			192
+#define IMX8MP_CLK_GPIO1_ROOT			193
+#define IMX8MP_CLK_GPIO2_ROOT			194
+#define IMX8MP_CLK_GPIO3_ROOT			195
+#define IMX8MP_CLK_GPIO4_ROOT			196
+#define IMX8MP_CLK_GPIO5_ROOT			197
+#define IMX8MP_CLK_GPT1_ROOT			198
+#define IMX8MP_CLK_GPT2_ROOT			199
+#define IMX8MP_CLK_GPT3_ROOT			200
+#define IMX8MP_CLK_GPT4_ROOT			201
+#define IMX8MP_CLK_GPT5_ROOT			202
+#define IMX8MP_CLK_GPT6_ROOT			203
+#define IMX8MP_CLK_HS_ROOT			204
+#define IMX8MP_CLK_I2C1_ROOT			205
+#define IMX8MP_CLK_I2C2_ROOT			206
+#define IMX8MP_CLK_I2C3_ROOT			207
+#define IMX8MP_CLK_I2C4_ROOT			208
+#define IMX8MP_CLK_IOMUX_ROOT			209
+#define IMX8MP_CLK_IPMUX1_ROOT			210
+#define IMX8MP_CLK_IPMUX2_ROOT			211
+#define IMX8MP_CLK_IPMUX3_ROOT			212
+#define IMX8MP_CLK_MU_ROOT			213
+#define IMX8MP_CLK_OCOTP_ROOT			214
+#define IMX8MP_CLK_OCRAM_ROOT			215
+#define IMX8MP_CLK_OCRAM_S_ROOT			216
+#define IMX8MP_CLK_PCIE_ROOT			217
+#define IMX8MP_CLK_PERFMON1_ROOT		218
+#define IMX8MP_CLK_PERFMON2_ROOT		219
+#define IMX8MP_CLK_PWM1_ROOT			220
+#define IMX8MP_CLK_PWM2_ROOT			221
+#define IMX8MP_CLK_PWM3_ROOT			222
+#define IMX8MP_CLK_PWM4_ROOT			223
+#define IMX8MP_CLK_QOS_ROOT			224
+#define IMX8MP_CLK_QOS_ENET_ROOT		225
+#define IMX8MP_CLK_QSPI_ROOT			226
+#define IMX8MP_CLK_NAND_ROOT			227
+#define IMX8MP_CLK_NAND_USDHC_BUS_RAWNAND_CLK	228
+#define IMX8MP_CLK_RDC_ROOT			229
+#define IMX8MP_CLK_ROM_ROOT			230
+#define IMX8MP_CLK_I2C5_ROOT			231
+#define IMX8MP_CLK_I2C6_ROOT			232
+#define IMX8MP_CLK_CAN1_ROOT			233
+#define IMX8MP_CLK_CAN2_ROOT			234
+#define IMX8MP_CLK_SCTR_ROOT			235
+#define IMX8MP_CLK_SDMA1_ROOT			236
+#define IMX8MP_CLK_ENET_QOS_ROOT		237
+#define IMX8MP_CLK_SEC_DEBUG_ROOT		238
+#define IMX8MP_CLK_SEMA1_ROOT			239
+#define IMX8MP_CLK_SEMA2_ROOT			240
+#define IMX8MP_CLK_IRQ_STEER_ROOT		241
+#define IMX8MP_CLK_SIM_ENET_ROOT		242
+#define IMX8MP_CLK_SIM_M_ROOT			243
+#define IMX8MP_CLK_SIM_MAIN_ROOT		244
+#define IMX8MP_CLK_SIM_S_ROOT			245
+#define IMX8MP_CLK_SIM_WAKEUP_ROOT		246
+#define IMX8MP_CLK_GPU2D_ROOT			247
+#define IMX8MP_CLK_GPU3D_ROOT			248
+#define IMX8MP_CLK_SNVS_ROOT			249
+#define IMX8MP_CLK_TRACE_ROOT			250
+#define IMX8MP_CLK_UART1_ROOT			251
+#define IMX8MP_CLK_UART2_ROOT			252
+#define IMX8MP_CLK_UART3_ROOT			253
+#define IMX8MP_CLK_UART4_ROOT			254
+#define IMX8MP_CLK_USB_ROOT			255
+#define IMX8MP_CLK_USB_PHY_ROOT			256
+#define IMX8MP_CLK_USDHC1_ROOT			257
+#define IMX8MP_CLK_USDHC2_ROOT			258
+#define IMX8MP_CLK_WDOG1_ROOT			259
+#define IMX8MP_CLK_WDOG2_ROOT			260
+#define IMX8MP_CLK_WDOG3_ROOT			261
+#define IMX8MP_CLK_VPU_G1_ROOT			262
+#define IMX8MP_CLK_GPU_ROOT			263
+#define IMX8MP_CLK_NOC_WRAPPER_ROOT		264
+#define IMX8MP_CLK_VPU_VC8KE_ROOT		265
+#define IMX8MP_CLK_VPU_G2_ROOT			266
+#define IMX8MP_CLK_NPU_ROOT			267
+#define IMX8MP_CLK_HSIO_ROOT			268
+#define IMX8MP_CLK_MEDIA_APB_ROOT		269
+#define IMX8MP_CLK_MEDIA_AXI_ROOT		270
+#define IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT		271
+#define IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT		272
+#define IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT		273
+#define IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT		274
+#define IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT	275
+#define IMX8MP_CLK_MEDIA_ISP_ROOT		276
+#define IMX8MP_CLK_USDHC3_ROOT			277
+#define IMX8MP_CLK_HDMI_ROOT			278
+#define IMX8MP_CLK_XTAL_ROOT			279
+#define IMX8MP_CLK_PLL_ROOT			280
+#define IMX8MP_CLK_TSENSOR_ROOT			281
+#define IMX8MP_CLK_VPU_ROOT			282
+#define IMX8MP_CLK_MRPR_ROOT			283
+#define IMX8MP_CLK_AUDIO_ROOT			284
+#define IMX8MP_CLK_DRAM_ALT_ROOT		285
+#define IMX8MP_CLK_DRAM_CORE			286
+#define IMX8MP_CLK_ARM				287
+
+#define IMX8MP_CLK_END				288
+
+#endif
diff --git a/dts/include/dt-bindings/clock/marvell,mmp2.h b/dts/include/dt-bindings/clock/marvell,mmp2.h
index e785c6eb35..4b1a7724f2 100644
--- a/dts/include/dt-bindings/clock/marvell,mmp2.h
+++ b/dts/include/dt-bindings/clock/marvell,mmp2.h
@@ -72,6 +72,8 @@
 #define MMP2_CLK_CCIC1_PHY		118
 #define MMP2_CLK_CCIC1_SPHY		119
 #define MMP2_CLK_DISP0_LCDC		120
+#define MMP2_CLK_USBHSIC0		121
+#define MMP2_CLK_USBHSIC1		122
 
 #define MMP2_NR_CLKS			200
 #endif
diff --git a/dts/include/dt-bindings/clock/meson8-ddr-clkc.h b/dts/include/dt-bindings/clock/meson8-ddr-clkc.h
new file mode 100644
index 0000000000..a8e0fa2987
--- /dev/null
+++ b/dts/include/dt-bindings/clock/meson8-ddr-clkc.h
@@ -0,0 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define DDR_CLKID_DDR_PLL_DCO			0
+#define DDR_CLKID_DDR_PLL			1
diff --git a/dts/include/dt-bindings/clock/omap4.h b/dts/include/dt-bindings/clock/omap4.h
index 5167b2d93a..88d73be84b 100644
--- a/dts/include/dt-bindings/clock/omap4.h
+++ b/dts/include/dt-bindings/clock/omap4.h
@@ -124,6 +124,17 @@
 #define OMAP4_UART4_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x158)
 #define OMAP4_MMC5_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x160)
 
+/* l4_secure clocks */
+#define OMAP4_L4_SECURE_CLKCTRL_OFFSET	0x1a0
+#define OMAP4_L4_SECURE_CLKCTRL_INDEX(offset)	((offset) - OMAP4_L4_SECURE_CLKCTRL_OFFSET)
+#define OMAP4_AES1_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1a0)
+#define OMAP4_AES2_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1a8)
+#define OMAP4_DES3DES_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1b0)
+#define OMAP4_PKA_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1b8)
+#define OMAP4_RNG_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1c0)
+#define OMAP4_SHA2MD5_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1c8)
+#define OMAP4_CRYPTODMA_CLKCTRL	OMAP4_L4_SECURE_CLKCTRL_INDEX(0x1d8)
+
 /* l4_wkup clocks */
 #define OMAP4_L4_WKUP_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x20)
 #define OMAP4_WD_TIMER2_CLKCTRL	OMAP4_CLKCTRL_INDEX(0x30)
diff --git a/dts/include/dt-bindings/clock/omap5.h b/dts/include/dt-bindings/clock/omap5.h
index ba672064cc..41775272fd 100644
--- a/dts/include/dt-bindings/clock/omap5.h
+++ b/dts/include/dt-bindings/clock/omap5.h
@@ -16,6 +16,7 @@
 
 /* abe clocks */
 #define OMAP5_L4_ABE_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)
+#define OMAP5_AESS_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x28)
 #define OMAP5_MCPDM_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x30)
 #define OMAP5_DMIC_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x38)
 #define OMAP5_MCBSP1_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x48)
@@ -86,6 +87,17 @@
 #define OMAP5_UART5_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x170)
 #define OMAP5_UART6_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x178)
 
+/* l4_secure clocks */
+#define OMAP5_L4_SECURE_CLKCTRL_OFFSET	0x1a0
+#define OMAP5_L4_SECURE_CLKCTRL_INDEX(offset)	((offset) - OMAP5_L4_SECURE_CLKCTRL_OFFSET)
+#define OMAP5_AES1_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1a0)
+#define OMAP5_AES2_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1a8)
+#define OMAP5_DES3DES_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1b0)
+#define OMAP5_FPKA_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1b8)
+#define OMAP5_RNG_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1c0)
+#define OMAP5_SHA2MD5_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1c8)
+#define OMAP5_DMA_CRYPTO_CLKCTRL	OMAP5_L4_SECURE_CLKCTRL_INDEX(0x1d8)
+
 /* iva clocks */
 #define OMAP5_IVA_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x20)
 #define OMAP5_SL2IF_CLKCTRL	OMAP5_CLKCTRL_INDEX(0x28)
diff --git a/dts/include/dt-bindings/clock/qcom,dispcc-sc7180.h b/dts/include/dt-bindings/clock/qcom,dispcc-sc7180.h
new file mode 100644
index 0000000000..b9b51617a3
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,dispcc-sc7180.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_DISP_CC_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_DISP_CC_SC7180_H
+
+#define DISP_CC_PLL0				0
+#define DISP_CC_PLL0_OUT_EVEN			1
+#define DISP_CC_MDSS_AHB_CLK			2
+#define DISP_CC_MDSS_AHB_CLK_SRC		3
+#define DISP_CC_MDSS_BYTE0_CLK			4
+#define DISP_CC_MDSS_BYTE0_CLK_SRC		5
+#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC		6
+#define DISP_CC_MDSS_BYTE0_INTF_CLK		7
+#define DISP_CC_MDSS_DP_AUX_CLK			8
+#define DISP_CC_MDSS_DP_AUX_CLK_SRC		9
+#define DISP_CC_MDSS_DP_CRYPTO_CLK		10
+#define DISP_CC_MDSS_DP_CRYPTO_CLK_SRC		11
+#define DISP_CC_MDSS_DP_LINK_CLK		12
+#define DISP_CC_MDSS_DP_LINK_CLK_SRC		13
+#define DISP_CC_MDSS_DP_LINK_DIV_CLK_SRC	14
+#define DISP_CC_MDSS_DP_LINK_INTF_CLK		15
+#define DISP_CC_MDSS_DP_PIXEL_CLK		16
+#define DISP_CC_MDSS_DP_PIXEL_CLK_SRC		17
+#define DISP_CC_MDSS_ESC0_CLK			18
+#define DISP_CC_MDSS_ESC0_CLK_SRC		19
+#define DISP_CC_MDSS_MDP_CLK			20
+#define DISP_CC_MDSS_MDP_CLK_SRC		21
+#define DISP_CC_MDSS_MDP_LUT_CLK		22
+#define DISP_CC_MDSS_NON_GDSC_AHB_CLK		23
+#define DISP_CC_MDSS_PCLK0_CLK			24
+#define DISP_CC_MDSS_PCLK0_CLK_SRC		25
+#define DISP_CC_MDSS_ROT_CLK			26
+#define DISP_CC_MDSS_ROT_CLK_SRC		27
+#define DISP_CC_MDSS_RSCC_AHB_CLK		28
+#define DISP_CC_MDSS_RSCC_VSYNC_CLK		29
+#define DISP_CC_MDSS_VSYNC_CLK			30
+#define DISP_CC_MDSS_VSYNC_CLK_SRC		31
+#define DISP_CC_XO_CLK				32
+
+/* DISP_CC GDSCR */
+#define MDSS_GDSC				0
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,dispcc-sdm845.h b/dts/include/dt-bindings/clock/qcom,dispcc-sdm845.h
index 11eed4bc96..4016fd1d5b 100644
--- a/dts/include/dt-bindings/clock/qcom,dispcc-sdm845.h
+++ b/dts/include/dt-bindings/clock/qcom,dispcc-sdm845.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /*
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
  */
 
 #ifndef _DT_BINDINGS_CLK_SDM_DISP_CC_SDM845_H
@@ -35,6 +35,17 @@
 #define DISP_CC_PLL0						25
 #define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC				26
 #define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC				27
+#define DISP_CC_MDSS_DP_AUX_CLK					28
+#define DISP_CC_MDSS_DP_AUX_CLK_SRC				29
+#define DISP_CC_MDSS_DP_CRYPTO_CLK				30
+#define DISP_CC_MDSS_DP_CRYPTO_CLK_SRC				31
+#define DISP_CC_MDSS_DP_LINK_CLK				32
+#define DISP_CC_MDSS_DP_LINK_CLK_SRC				33
+#define DISP_CC_MDSS_DP_LINK_INTF_CLK				34
+#define DISP_CC_MDSS_DP_PIXEL1_CLK				35
+#define DISP_CC_MDSS_DP_PIXEL1_CLK_SRC				36
+#define DISP_CC_MDSS_DP_PIXEL_CLK				37
+#define DISP_CC_MDSS_DP_PIXEL_CLK_SRC				38
 
 /* DISP_CC Reset */
 #define DISP_CC_MDSS_RSCC_BCR					0
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-ipq6018.h b/dts/include/dt-bindings/clock/qcom,gcc-ipq6018.h
new file mode 100644
index 0000000000..6f4be3aa0a
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-ipq6018.h
@@ -0,0 +1,262 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_6018_H
+#define _DT_BINDINGS_CLOCK_IPQ_GCC_6018_H
+
+#define GPLL0					0
+#define UBI32_PLL				1
+#define GPLL6					2
+#define GPLL4					3
+#define PCNOC_BFDCD_CLK_SRC			4
+#define GPLL2					5
+#define NSS_CRYPTO_PLL				6
+#define NSS_PPE_CLK_SRC				7
+#define GCC_XO_CLK_SRC				8
+#define NSS_CE_CLK_SRC				9
+#define GCC_SLEEP_CLK_SRC			10
+#define APSS_AHB_CLK_SRC			11
+#define NSS_PORT5_RX_CLK_SRC			12
+#define NSS_PORT5_TX_CLK_SRC			13
+#define PCIE0_AXI_CLK_SRC			14
+#define USB0_MASTER_CLK_SRC			15
+#define APSS_AHB_POSTDIV_CLK_SRC		16
+#define NSS_PORT1_RX_CLK_SRC			17
+#define NSS_PORT1_TX_CLK_SRC			18
+#define NSS_PORT2_RX_CLK_SRC			19
+#define NSS_PORT2_TX_CLK_SRC			20
+#define NSS_PORT3_RX_CLK_SRC			21
+#define NSS_PORT3_TX_CLK_SRC			22
+#define NSS_PORT4_RX_CLK_SRC			23
+#define NSS_PORT4_TX_CLK_SRC			24
+#define NSS_PORT5_RX_DIV_CLK_SRC		25
+#define NSS_PORT5_TX_DIV_CLK_SRC		26
+#define APSS_AXI_CLK_SRC			27
+#define NSS_CRYPTO_CLK_SRC			28
+#define NSS_PORT1_RX_DIV_CLK_SRC		29
+#define NSS_PORT1_TX_DIV_CLK_SRC		30
+#define NSS_PORT2_RX_DIV_CLK_SRC		31
+#define NSS_PORT2_TX_DIV_CLK_SRC		32
+#define NSS_PORT3_RX_DIV_CLK_SRC		33
+#define NSS_PORT3_TX_DIV_CLK_SRC		34
+#define NSS_PORT4_RX_DIV_CLK_SRC		35
+#define NSS_PORT4_TX_DIV_CLK_SRC		36
+#define NSS_UBI0_CLK_SRC			37
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC		38
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC		39
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC		40
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC		41
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC		42
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC		43
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC		44
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC		45
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC		46
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC		47
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC		48
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC		49
+#define BLSP1_UART1_APPS_CLK_SRC		50
+#define BLSP1_UART2_APPS_CLK_SRC		51
+#define BLSP1_UART3_APPS_CLK_SRC		52
+#define BLSP1_UART4_APPS_CLK_SRC		53
+#define BLSP1_UART5_APPS_CLK_SRC		54
+#define BLSP1_UART6_APPS_CLK_SRC		55
+#define CRYPTO_CLK_SRC				56
+#define NSS_UBI0_DIV_CLK_SRC			57
+#define PCIE0_AUX_CLK_SRC			58
+#define PCIE0_PIPE_CLK_SRC			59
+#define SDCC1_APPS_CLK_SRC			60
+#define USB0_AUX_CLK_SRC			61
+#define USB0_MOCK_UTMI_CLK_SRC			62
+#define USB0_PIPE_CLK_SRC			63
+#define USB1_MOCK_UTMI_CLK_SRC			64
+#define GCC_APSS_AHB_CLK			65
+#define GCC_APSS_AXI_CLK			66
+#define GCC_BLSP1_AHB_CLK			67
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK		68
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK		69
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK		70
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK		71
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK		72
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK		73
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK		74
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK		75
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK		76
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK		77
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK		78
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK		79
+#define GCC_BLSP1_UART1_APPS_CLK		80
+#define GCC_BLSP1_UART2_APPS_CLK		81
+#define GCC_BLSP1_UART3_APPS_CLK		82
+#define GCC_BLSP1_UART4_APPS_CLK		83
+#define GCC_BLSP1_UART5_APPS_CLK		84
+#define GCC_BLSP1_UART6_APPS_CLK		85
+#define GCC_CRYPTO_AHB_CLK			86
+#define GCC_CRYPTO_AXI_CLK			87
+#define GCC_CRYPTO_CLK				88
+#define GCC_XO_CLK				89
+#define GCC_XO_DIV4_CLK				90
+#define GCC_MDIO_AHB_CLK			91
+#define GCC_CRYPTO_PPE_CLK			92
+#define GCC_NSS_CE_APB_CLK			93
+#define GCC_NSS_CE_AXI_CLK			94
+#define GCC_NSS_CFG_CLK				95
+#define GCC_NSS_CRYPTO_CLK			96
+#define GCC_NSS_CSR_CLK				97
+#define GCC_NSS_EDMA_CFG_CLK			98
+#define GCC_NSS_EDMA_CLK			99
+#define GCC_NSS_NOC_CLK				100
+#define GCC_NSS_PORT1_RX_CLK			101
+#define GCC_NSS_PORT1_TX_CLK			102
+#define GCC_NSS_PORT2_RX_CLK			103
+#define GCC_NSS_PORT2_TX_CLK			104
+#define GCC_NSS_PORT3_RX_CLK			105
+#define GCC_NSS_PORT3_TX_CLK			106
+#define GCC_NSS_PORT4_RX_CLK			107
+#define GCC_NSS_PORT4_TX_CLK			108
+#define GCC_NSS_PORT5_RX_CLK			109
+#define GCC_NSS_PORT5_TX_CLK			110
+#define GCC_NSS_PPE_CFG_CLK			111
+#define GCC_NSS_PPE_CLK				112
+#define GCC_NSS_PPE_IPE_CLK			113
+#define GCC_NSS_PTP_REF_CLK			114
+#define GCC_NSSNOC_CE_APB_CLK			115
+#define GCC_NSSNOC_CE_AXI_CLK			116
+#define GCC_NSSNOC_CRYPTO_CLK			117
+#define GCC_NSSNOC_PPE_CFG_CLK			118
+#define GCC_NSSNOC_PPE_CLK			119
+#define GCC_NSSNOC_QOSGEN_REF_CLK		120
+#define GCC_NSSNOC_TIMEOUT_REF_CLK		121
+#define GCC_NSSNOC_UBI0_AHB_CLK			122
+#define GCC_PORT1_MAC_CLK			123
+#define GCC_PORT2_MAC_CLK			124
+#define GCC_PORT3_MAC_CLK			125
+#define GCC_PORT4_MAC_CLK			126
+#define GCC_PORT5_MAC_CLK			127
+#define GCC_UBI0_AHB_CLK			128
+#define GCC_UBI0_AXI_CLK			129
+#define GCC_UBI0_CORE_CLK			130
+#define GCC_PCIE0_AHB_CLK			131
+#define GCC_PCIE0_AUX_CLK			132
+#define GCC_PCIE0_AXI_M_CLK			133
+#define GCC_PCIE0_AXI_S_CLK			134
+#define GCC_PCIE0_PIPE_CLK			135
+#define GCC_PRNG_AHB_CLK			136
+#define GCC_QPIC_AHB_CLK			137
+#define GCC_QPIC_CLK				138
+#define GCC_SDCC1_AHB_CLK			139
+#define GCC_SDCC1_APPS_CLK			140
+#define GCC_UNIPHY0_AHB_CLK			141
+#define GCC_UNIPHY0_PORT1_RX_CLK		142
+#define GCC_UNIPHY0_PORT1_TX_CLK		143
+#define GCC_UNIPHY0_PORT2_RX_CLK		144
+#define GCC_UNIPHY0_PORT2_TX_CLK		145
+#define GCC_UNIPHY0_PORT3_RX_CLK		146
+#define GCC_UNIPHY0_PORT3_TX_CLK		147
+#define GCC_UNIPHY0_PORT4_RX_CLK		148
+#define GCC_UNIPHY0_PORT4_TX_CLK		149
+#define GCC_UNIPHY0_PORT5_RX_CLK		150
+#define GCC_UNIPHY0_PORT5_TX_CLK		151
+#define GCC_UNIPHY0_SYS_CLK			152
+#define GCC_UNIPHY1_AHB_CLK			153
+#define GCC_UNIPHY1_PORT5_RX_CLK		154
+#define GCC_UNIPHY1_PORT5_TX_CLK		155
+#define GCC_UNIPHY1_SYS_CLK			156
+#define GCC_USB0_AUX_CLK			157
+#define GCC_USB0_MASTER_CLK			158
+#define GCC_USB0_MOCK_UTMI_CLK			159
+#define GCC_USB0_PHY_CFG_AHB_CLK		160
+#define GCC_USB0_PIPE_CLK			161
+#define GCC_USB0_SLEEP_CLK			162
+#define GCC_USB1_MASTER_CLK			163
+#define GCC_USB1_MOCK_UTMI_CLK			164
+#define GCC_USB1_PHY_CFG_AHB_CLK		165
+#define GCC_USB1_SLEEP_CLK			166
+#define GP1_CLK_SRC				167
+#define GP2_CLK_SRC				168
+#define GP3_CLK_SRC				169
+#define GCC_GP1_CLK				170
+#define GCC_GP2_CLK				171
+#define GCC_GP3_CLK				172
+#define SYSTEM_NOC_BFDCD_CLK_SRC		173
+#define GCC_NSSNOC_SNOC_CLK			174
+#define GCC_UBI0_NC_AXI_CLK			175
+#define GCC_UBI1_NC_AXI_CLK			176
+#define GPLL0_MAIN				177
+#define UBI32_PLL_MAIN				178
+#define GPLL6_MAIN				179
+#define GPLL4_MAIN				180
+#define GPLL2_MAIN				181
+#define NSS_CRYPTO_PLL_MAIN			182
+#define GCC_CMN_12GPLL_AHB_CLK			183
+#define GCC_CMN_12GPLL_SYS_CLK			184
+#define GCC_SNOC_BUS_TIMEOUT2_AHB_CLK		185
+#define GCC_SYS_NOC_USB0_AXI_CLK		186
+#define GCC_SYS_NOC_PCIE0_AXI_CLK		187
+#define QDSS_TSCTR_CLK_SRC			188
+#define QDSS_AT_CLK_SRC				189
+#define GCC_QDSS_AT_CLK				190
+#define GCC_QDSS_DAP_CLK			191
+#define ADSS_PWM_CLK_SRC			192
+#define GCC_ADSS_PWM_CLK			193
+#define SDCC1_ICE_CORE_CLK_SRC			194
+#define GCC_SDCC1_ICE_CORE_CLK			195
+#define GCC_DCC_CLK				196
+#define PCIE0_RCHNG_CLK_SRC			197
+#define GCC_PCIE0_AXI_S_BRIDGE_CLK		198
+#define PCIE0_RCHNG_CLK				199
+#define UBI32_MEM_NOC_BFDCD_CLK_SRC		200
+#define WCSS_AHB_CLK_SRC			201
+#define Q6_AXI_CLK_SRC				202
+#define GCC_Q6SS_PCLKDBG_CLK			203
+#define GCC_Q6_TSCTR_1TO2_CLK			204
+#define GCC_WCSS_CORE_TBU_CLK			205
+#define GCC_WCSS_AXI_M_CLK			206
+#define GCC_SYS_NOC_WCSS_AHB_CLK		207
+#define GCC_Q6_AXIM_CLK				208
+#define GCC_Q6SS_ATBM_CLK			209
+#define GCC_WCSS_Q6_TBU_CLK			210
+#define GCC_Q6_AXIM2_CLK			211
+#define GCC_Q6_AHB_CLK				212
+#define GCC_Q6_AHB_S_CLK			213
+#define GCC_WCSS_DBG_IFC_APB_CLK		214
+#define GCC_WCSS_DBG_IFC_ATB_CLK		215
+#define GCC_WCSS_DBG_IFC_NTS_CLK		216
+#define GCC_WCSS_DBG_IFC_DAPBUS_CLK		217
+#define GCC_WCSS_DBG_IFC_APB_BDG_CLK		218
+#define GCC_WCSS_DBG_IFC_ATB_BDG_CLK		219
+#define GCC_WCSS_DBG_IFC_NTS_BDG_CLK		220
+#define GCC_WCSS_DBG_IFC_DAPBUS_BDG_CLK		221
+#define GCC_WCSS_ECAHB_CLK			222
+#define GCC_WCSS_ACMT_CLK			223
+#define GCC_WCSS_AHB_S_CLK			224
+#define GCC_RBCPR_WCSS_CLK			225
+#define RBCPR_WCSS_CLK_SRC			226
+#define GCC_RBCPR_WCSS_AHB_CLK			227
+#define GCC_LPASS_CORE_AXIM_CLK			228
+#define GCC_LPASS_SNOC_CFG_CLK			229
+#define GCC_LPASS_Q6_AXIM_CLK			230
+#define GCC_LPASS_Q6_ATBM_AT_CLK		231
+#define GCC_LPASS_Q6_PCLKDBG_CLK		232
+#define GCC_LPASS_Q6SS_TSCTR_1TO2_CLK		233
+#define GCC_LPASS_Q6SS_TRIG_CLK			234
+#define GCC_LPASS_TBU_CLK			235
+#define LPASS_CORE_AXIM_CLK_SRC			236
+#define LPASS_SNOC_CFG_CLK_SRC			237
+#define LPASS_Q6_AXIM_CLK_SRC			238
+#define GCC_PCNOC_LPASS_CLK			239
+#define GCC_UBI0_UTCM_CLK			240
+#define SNOC_NSSNOC_BFDCD_CLK_SRC		241
+#define GCC_SNOC_NSSNOC_CLK			242
+#define GCC_MEM_NOC_Q6_AXI_CLK			243
+#define GCC_MEM_NOC_UBI32_CLK			244
+#define GCC_MEM_NOC_LPASS_CLK			245
+#define GCC_SNOC_LPASS_CFG_CLK			246
+#define GCC_SYS_NOC_QDSS_STM_AXI_CLK		247
+#define GCC_QDSS_STM_CLK			248
+#define GCC_QDSS_TRACECLKIN_CLK			249
+#define QDSS_STM_CLK_SRC			250
+#define QDSS_TRACECLKIN_CLK_SRC			251
+#define GCC_NSSNOC_ATB_CLK			252
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h
index de1d8a1f59..63e02dc32a 100644
--- a/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h
+++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8998.h
@@ -182,6 +182,7 @@
 #define GCC_MSS_GPLL0_DIV_CLK_SRC				173
 #define GCC_MSS_SNOC_AXI_CLK					174
 #define GCC_MSS_MNOC_BIMC_AXI_CLK				175
+#define GCC_BIMC_GFX_CLK					176
 
 #define PCIE_0_GDSC						0
 #define UFS_GDSC						1
diff --git a/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h b/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h
new file mode 100644
index 0000000000..0e4643b08b
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gpucc-sc7180.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SC7180_H
+
+#define GPU_CC_PLL1			0
+#define GPU_CC_AHB_CLK			1
+#define GPU_CC_CRC_AHB_CLK		2
+#define GPU_CC_CX_GMU_CLK		3
+#define GPU_CC_CX_SNOC_DVM_CLK		4
+#define GPU_CC_CXO_AON_CLK		5
+#define GPU_CC_CXO_CLK			6
+#define GPU_CC_GMU_CLK_SRC		7
+
+/* CAM_CC GDSCRs */
+#define CX_GDSC				0
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,mmcc-msm8998.h b/dts/include/dt-bindings/clock/qcom,mmcc-msm8998.h
new file mode 100644
index 0000000000..ecbafdb930
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,mmcc-msm8998.h
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_MMCC_8998_H
+#define _DT_BINDINGS_CLK_MSM_MMCC_8998_H
+
+#define MMPLL0						0
+#define MMPLL0_OUT_EVEN					1
+#define MMPLL1						2
+#define MMPLL1_OUT_EVEN					3
+#define MMPLL3						4
+#define MMPLL3_OUT_EVEN					5
+#define MMPLL4						6
+#define MMPLL4_OUT_EVEN					7
+#define MMPLL5						8
+#define MMPLL5_OUT_EVEN					9
+#define MMPLL6						10
+#define MMPLL6_OUT_EVEN					11
+#define MMPLL7						12
+#define MMPLL7_OUT_EVEN					13
+#define MMPLL10						14
+#define MMPLL10_OUT_EVEN				15
+#define BYTE0_CLK_SRC					16
+#define BYTE1_CLK_SRC					17
+#define CCI_CLK_SRC					18
+#define CPP_CLK_SRC					19
+#define CSI0_CLK_SRC					20
+#define CSI1_CLK_SRC					21
+#define CSI2_CLK_SRC					22
+#define CSI3_CLK_SRC					23
+#define CSIPHY_CLK_SRC					24
+#define CSI0PHYTIMER_CLK_SRC				25
+#define CSI1PHYTIMER_CLK_SRC				26
+#define CSI2PHYTIMER_CLK_SRC				27
+#define DP_AUX_CLK_SRC					28
+#define DP_CRYPTO_CLK_SRC				29
+#define DP_LINK_CLK_SRC					30
+#define DP_PIXEL_CLK_SRC				31
+#define ESC0_CLK_SRC					32
+#define ESC1_CLK_SRC					33
+#define EXTPCLK_CLK_SRC					34
+#define FD_CORE_CLK_SRC					35
+#define HDMI_CLK_SRC					36
+#define JPEG0_CLK_SRC					37
+#define MAXI_CLK_SRC					38
+#define MCLK0_CLK_SRC					39
+#define MCLK1_CLK_SRC					40
+#define MCLK2_CLK_SRC					41
+#define MCLK3_CLK_SRC					42
+#define MDP_CLK_SRC					43
+#define VSYNC_CLK_SRC					44
+#define AHB_CLK_SRC					45
+#define AXI_CLK_SRC					46
+#define PCLK0_CLK_SRC					47
+#define PCLK1_CLK_SRC					48
+#define ROT_CLK_SRC					49
+#define VIDEO_CORE_CLK_SRC				50
+#define VIDEO_SUBCORE0_CLK_SRC				51
+#define VIDEO_SUBCORE1_CLK_SRC				52
+#define VFE0_CLK_SRC					53
+#define VFE1_CLK_SRC					54
+#define MISC_AHB_CLK					55
+#define VIDEO_CORE_CLK					56
+#define VIDEO_AHB_CLK					57
+#define VIDEO_AXI_CLK					58
+#define VIDEO_MAXI_CLK					59
+#define VIDEO_SUBCORE0_CLK				60
+#define VIDEO_SUBCORE1_CLK				61
+#define MDSS_AHB_CLK					62
+#define MDSS_HDMI_DP_AHB_CLK				63
+#define MDSS_AXI_CLK					64
+#define MDSS_PCLK0_CLK					65
+#define MDSS_PCLK1_CLK					66
+#define MDSS_MDP_CLK					67
+#define MDSS_MDP_LUT_CLK				68
+#define MDSS_EXTPCLK_CLK				69
+#define MDSS_VSYNC_CLK					70
+#define MDSS_HDMI_CLK					71
+#define MDSS_BYTE0_CLK					72
+#define MDSS_BYTE1_CLK					73
+#define MDSS_ESC0_CLK					74
+#define MDSS_ESC1_CLK					75
+#define MDSS_ROT_CLK					76
+#define MDSS_DP_LINK_CLK				77
+#define MDSS_DP_LINK_INTF_CLK				78
+#define MDSS_DP_CRYPTO_CLK				79
+#define MDSS_DP_PIXEL_CLK				80
+#define MDSS_DP_AUX_CLK					81
+#define MDSS_BYTE0_INTF_CLK				82
+#define MDSS_BYTE1_INTF_CLK				83
+#define CAMSS_CSI0PHYTIMER_CLK				84
+#define CAMSS_CSI1PHYTIMER_CLK				85
+#define CAMSS_CSI2PHYTIMER_CLK				86
+#define CAMSS_CSI0_CLK					87
+#define CAMSS_CSI0_AHB_CLK				88
+#define CAMSS_CSI0RDI_CLK				89
+#define CAMSS_CSI0PIX_CLK				90
+#define CAMSS_CSI1_CLK					91
+#define CAMSS_CSI1_AHB_CLK				92
+#define CAMSS_CSI1RDI_CLK				93
+#define CAMSS_CSI1PIX_CLK				94
+#define CAMSS_CSI2_CLK					95
+#define CAMSS_CSI2_AHB_CLK				96
+#define CAMSS_CSI2RDI_CLK				97
+#define CAMSS_CSI2PIX_CLK				98
+#define CAMSS_CSI3_CLK					99
+#define CAMSS_CSI3_AHB_CLK				100
+#define CAMSS_CSI3RDI_CLK				101
+#define CAMSS_CSI3PIX_CLK				102
+#define CAMSS_ISPIF_AHB_CLK				103
+#define CAMSS_CCI_CLK					104
+#define CAMSS_CCI_AHB_CLK				105
+#define CAMSS_MCLK0_CLK					106
+#define CAMSS_MCLK1_CLK					107
+#define CAMSS_MCLK2_CLK					108
+#define CAMSS_MCLK3_CLK					109
+#define CAMSS_TOP_AHB_CLK				110
+#define CAMSS_AHB_CLK					111
+#define CAMSS_MICRO_AHB_CLK				112
+#define CAMSS_JPEG0_CLK					113
+#define CAMSS_JPEG_AHB_CLK				114
+#define CAMSS_JPEG_AXI_CLK				115
+#define CAMSS_VFE0_AHB_CLK				116
+#define CAMSS_VFE1_AHB_CLK				117
+#define CAMSS_VFE0_CLK					118
+#define CAMSS_VFE1_CLK					119
+#define CAMSS_CPP_CLK					120
+#define CAMSS_CPP_AHB_CLK				121
+#define CAMSS_VFE_VBIF_AHB_CLK				122
+#define CAMSS_VFE_VBIF_AXI_CLK				123
+#define CAMSS_CPP_AXI_CLK				124
+#define CAMSS_CPP_VBIF_AHB_CLK				125
+#define CAMSS_CSI_VFE0_CLK				126
+#define CAMSS_CSI_VFE1_CLK				127
+#define CAMSS_VFE0_STREAM_CLK				128
+#define CAMSS_VFE1_STREAM_CLK				129
+#define CAMSS_CPHY_CSID0_CLK				130
+#define CAMSS_CPHY_CSID1_CLK				131
+#define CAMSS_CPHY_CSID2_CLK				132
+#define CAMSS_CPHY_CSID3_CLK				133
+#define CAMSS_CSIPHY0_CLK				134
+#define CAMSS_CSIPHY1_CLK				135
+#define CAMSS_CSIPHY2_CLK				136
+#define FD_CORE_CLK					137
+#define FD_CORE_UAR_CLK					138
+#define FD_AHB_CLK					139
+#define MNOC_AHB_CLK					140
+#define BIMC_SMMU_AHB_CLK				141
+#define BIMC_SMMU_AXI_CLK				142
+#define MNOC_MAXI_CLK					143
+#define VMEM_MAXI_CLK					144
+#define VMEM_AHB_CLK					145
+
+#define SPDM_BCR					0
+#define SPDM_RM_BCR					1
+#define MISC_BCR					2
+#define VIDEO_TOP_BCR					3
+#define THROTTLE_VIDEO_BCR				4
+#define MDSS_BCR					5
+#define THROTTLE_MDSS_BCR				6
+#define CAMSS_PHY0_BCR					7
+#define CAMSS_PHY1_BCR					8
+#define CAMSS_PHY2_BCR					9
+#define CAMSS_CSI0_BCR					10
+#define CAMSS_CSI0RDI_BCR				11
+#define CAMSS_CSI0PIX_BCR				12
+#define CAMSS_CSI1_BCR					13
+#define CAMSS_CSI1RDI_BCR				14
+#define CAMSS_CSI1PIX_BCR				15
+#define CAMSS_CSI2_BCR					16
+#define CAMSS_CSI2RDI_BCR				17
+#define CAMSS_CSI2PIX_BCR				18
+#define CAMSS_CSI3_BCR					19
+#define CAMSS_CSI3RDI_BCR				20
+#define CAMSS_CSI3PIX_BCR				21
+#define CAMSS_ISPIF_BCR					22
+#define CAMSS_CCI_BCR					23
+#define CAMSS_TOP_BCR					24
+#define CAMSS_AHB_BCR					25
+#define CAMSS_MICRO_BCR					26
+#define CAMSS_JPEG_BCR					27
+#define CAMSS_VFE0_BCR					28
+#define CAMSS_VFE1_BCR					29
+#define CAMSS_VFE_VBIF_BCR				30
+#define CAMSS_CPP_TOP_BCR				31
+#define CAMSS_CPP_BCR					32
+#define CAMSS_CSI_VFE0_BCR				33
+#define CAMSS_CSI_VFE1_BCR				34
+#define CAMSS_FD_BCR					35
+#define THROTTLE_CAMSS_BCR				36
+#define MNOCAHB_BCR					37
+#define MNOCAXI_BCR					38
+#define BMIC_SMMU_BCR					39
+#define MNOC_MAXI_BCR					40
+#define VMEM_BCR					41
+#define BTO_BCR						42
+
+#define VIDEO_TOP_GDSC		1
+#define VIDEO_SUBCORE0_GDSC	2
+#define VIDEO_SUBCORE1_GDSC	3
+#define MDSS_GDSC		4
+#define CAMSS_TOP_GDSC		5
+#define CAMSS_VFE0_GDSC		6
+#define CAMSS_VFE1_GDSC		7
+#define CAMSS_CPP_GDSC		8
+#define BIMC_SMMU_GDSC		9
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,videocc-sc7180.h b/dts/include/dt-bindings/clock/qcom,videocc-sc7180.h
new file mode 100644
index 0000000000..7acaf1366b
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,videocc-sc7180.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_VIDEO_CC_SC7180_H
+
+/* VIDEO_CC clocks */
+#define VIDEO_PLL0				0
+#define VIDEO_CC_VCODEC0_AXI_CLK		1
+#define VIDEO_CC_VCODEC0_CORE_CLK		2
+#define VIDEO_CC_VENUS_AHB_CLK			3
+#define VIDEO_CC_VENUS_CLK_SRC			4
+#define VIDEO_CC_VENUS_CTL_AXI_CLK		5
+#define VIDEO_CC_VENUS_CTL_CORE_CLK		6
+#define VIDEO_CC_XO_CLK				7
+
+/* VIDEO_CC GDSCRs */
+#define VENUS_GDSC				0
+#define VCODEC0_GDSC				1
+
+#endif
diff --git a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
index a8ac4cfcdc..e512a1c9b0 100644
--- a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
+++ b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -46,6 +46,7 @@
 #define CLK_PLL_VIDEO0		7
 #define CLK_PLL_PERIPH0		11
 
+#define CLK_CPUX		21
 #define CLK_BUS_MIPI_DSI	28
 #define CLK_BUS_CE		29
 #define CLK_BUS_DMA		30
diff --git a/dts/include/dt-bindings/clock/sun6i-a31-ccu.h b/dts/include/dt-bindings/clock/sun6i-a31-ccu.h
index c5d1334018..39878d9dce 100644
--- a/dts/include/dt-bindings/clock/sun6i-a31-ccu.h
+++ b/dts/include/dt-bindings/clock/sun6i-a31-ccu.h
@@ -49,6 +49,8 @@
 
 #define CLK_PLL_VIDEO1_2X	13
 
+#define CLK_PLL_MIPI		15
+
 #define CLK_CPU			18
 
 #define CLK_AHB1_MIPIDSI	23
diff --git a/dts/include/dt-bindings/clock/sun8i-a23-a33-ccu.h b/dts/include/dt-bindings/clock/sun8i-a23-a33-ccu.h
index f8222b6b2c..eb524d0bbd 100644
--- a/dts/include/dt-bindings/clock/sun8i-a23-a33-ccu.h
+++ b/dts/include/dt-bindings/clock/sun8i-a23-a33-ccu.h
@@ -43,6 +43,8 @@
 #ifndef _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
 #define _DT_BINDINGS_CLK_SUN8I_A23_A33_H_
 
+#define CLK_PLL_MIPI		13
+
 #define CLK_CPUX		18
 
 #define CLK_BUS_MIPI_DSI	23
diff --git a/dts/include/dt-bindings/clock/sun8i-r40-ccu.h b/dts/include/dt-bindings/clock/sun8i-r40-ccu.h
index f9e15a2356..d7337b55a4 100644
--- a/dts/include/dt-bindings/clock/sun8i-r40-ccu.h
+++ b/dts/include/dt-bindings/clock/sun8i-r40-ccu.h
@@ -176,7 +176,7 @@
 #define CLK_AVS			152
 #define CLK_HDMI		153
 #define CLK_HDMI_SLOW		154
-
+#define CLK_MBUS		155
 #define CLK_DSI_DPHY		156
 #define CLK_TVE0		157
 #define CLK_TVE1		158
diff --git a/dts/include/dt-bindings/clk/ti-dra7-atl.h b/dts/include/dt-bindings/clock/ti-dra7-atl.h
index 42dd4164f6..42dd4164f6 100644
--- a/dts/include/dt-bindings/clk/ti-dra7-atl.h
+++ b/dts/include/dt-bindings/clock/ti-dra7-atl.h
diff --git a/dts/include/dt-bindings/clock/xlnx-versal-clk.h b/dts/include/dt-bindings/clock/xlnx-versal-clk.h
new file mode 100644
index 0000000000..264d634d22
--- /dev/null
+++ b/dts/include/dt-bindings/clock/xlnx-versal-clk.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2019 Xilinx Inc.
+ *
+ */
+
+#ifndef _DT_BINDINGS_CLK_VERSAL_H
+#define _DT_BINDINGS_CLK_VERSAL_H
+
+#define PMC_PLL					1
+#define APU_PLL					2
+#define RPU_PLL					3
+#define CPM_PLL					4
+#define NOC_PLL					5
+#define PLL_MAX					6
+#define PMC_PRESRC				7
+#define PMC_POSTCLK				8
+#define PMC_PLL_OUT				9
+#define PPLL					10
+#define NOC_PRESRC				11
+#define NOC_POSTCLK				12
+#define NOC_PLL_OUT				13
+#define NPLL					14
+#define APU_PRESRC				15
+#define APU_POSTCLK				16
+#define APU_PLL_OUT				17
+#define APLL					18
+#define RPU_PRESRC				19
+#define RPU_POSTCLK				20
+#define RPU_PLL_OUT				21
+#define RPLL					22
+#define CPM_PRESRC				23
+#define CPM_POSTCLK				24
+#define CPM_PLL_OUT				25
+#define CPLL					26
+#define PPLL_TO_XPD				27
+#define NPLL_TO_XPD				28
+#define APLL_TO_XPD				29
+#define RPLL_TO_XPD				30
+#define EFUSE_REF				31
+#define SYSMON_REF				32
+#define IRO_SUSPEND_REF				33
+#define USB_SUSPEND				34
+#define SWITCH_TIMEOUT				35
+#define RCLK_PMC				36
+#define RCLK_LPD				37
+#define WDT					38
+#define TTC0					39
+#define TTC1					40
+#define TTC2					41
+#define TTC3					42
+#define GEM_TSU					43
+#define GEM_TSU_LB				44
+#define MUXED_IRO_DIV2				45
+#define MUXED_IRO_DIV4				46
+#define PSM_REF					47
+#define GEM0_RX					48
+#define GEM0_TX					49
+#define GEM1_RX					50
+#define GEM1_TX					51
+#define CPM_CORE_REF				52
+#define CPM_LSBUS_REF				53
+#define CPM_DBG_REF				54
+#define CPM_AUX0_REF				55
+#define CPM_AUX1_REF				56
+#define QSPI_REF				57
+#define OSPI_REF				58
+#define SDIO0_REF				59
+#define SDIO1_REF				60
+#define PMC_LSBUS_REF				61
+#define I2C_REF					62
+#define TEST_PATTERN_REF			63
+#define DFT_OSC_REF				64
+#define PMC_PL0_REF				65
+#define PMC_PL1_REF				66
+#define PMC_PL2_REF				67
+#define PMC_PL3_REF				68
+#define CFU_REF					69
+#define SPARE_REF				70
+#define NPI_REF					71
+#define HSM0_REF				72
+#define HSM1_REF				73
+#define SD_DLL_REF				74
+#define FPD_TOP_SWITCH				75
+#define FPD_LSBUS				76
+#define ACPU					77
+#define DBG_TRACE				78
+#define DBG_FPD					79
+#define LPD_TOP_SWITCH				80
+#define ADMA					81
+#define LPD_LSBUS				82
+#define CPU_R5					83
+#define CPU_R5_CORE				84
+#define CPU_R5_OCM				85
+#define CPU_R5_OCM2				86
+#define IOU_SWITCH				87
+#define GEM0_REF				88
+#define GEM1_REF				89
+#define GEM_TSU_REF				90
+#define USB0_BUS_REF				91
+#define UART0_REF				92
+#define UART1_REF				93
+#define SPI0_REF				94
+#define SPI1_REF				95
+#define CAN0_REF				96
+#define CAN1_REF				97
+#define I2C0_REF				98
+#define I2C1_REF				99
+#define DBG_LPD					100
+#define TIMESTAMP_REF				101
+#define DBG_TSTMP				102
+#define CPM_TOPSW_REF				103
+#define USB3_DUAL_REF				104
+#define OUTCLK_MAX				105
+#define REF_CLK					106
+#define PL_ALT_REF_CLK				107
+#define MUXED_IRO				108
+#define PL_EXT					109
+#define PL_LB					110
+#define MIO_50_OR_51				111
+#define MIO_24_OR_25				112
+
+#endif
diff --git a/dts/include/dt-bindings/dma/x1830-dma.h b/dts/include/dt-bindings/dma/x1830-dma.h
new file mode 100644
index 0000000000..35bcb8966e
--- /dev/null
+++ b/dts/include/dt-bindings/dma/x1830-dma.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * This header provides macros for X1830 DMA bindings.
+ *
+ * Copyright (c) 2019 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+ */
+
+#ifndef __DT_BINDINGS_DMA_X1830_DMA_H__
+#define __DT_BINDINGS_DMA_X1830_DMA_H__
+
+/*
+ * Request type numbers for the X1830 DMA controller (written to the DRTn
+ * register for the channel).
+ */
+#define X1830_DMA_I2S0_TX	0x6
+#define X1830_DMA_I2S0_RX	0x7
+#define X1830_DMA_AUTO		0x8
+#define X1830_DMA_SADC_RX	0x9
+#define X1830_DMA_UART1_TX	0x12
+#define X1830_DMA_UART1_RX	0x13
+#define X1830_DMA_UART0_TX	0x14
+#define X1830_DMA_UART0_RX	0x15
+#define X1830_DMA_SSI0_TX	0x16
+#define X1830_DMA_SSI0_RX	0x17
+#define X1830_DMA_SSI1_TX	0x18
+#define X1830_DMA_SSI1_RX	0x19
+#define X1830_DMA_MSC0_TX	0x1a
+#define X1830_DMA_MSC0_RX	0x1b
+#define X1830_DMA_MSC1_TX	0x1c
+#define X1830_DMA_MSC1_RX	0x1d
+#define X1830_DMA_DMIC_RX	0x21
+#define X1830_DMA_SMB0_TX	0x24
+#define X1830_DMA_SMB0_RX	0x25
+#define X1830_DMA_SMB1_TX	0x26
+#define X1830_DMA_SMB1_RX	0x27
+#define X1830_DMA_DES_TX	0x2e
+#define X1830_DMA_DES_RX	0x2f
+
+#endif /* __DT_BINDINGS_DMA_X1830_DMA_H__ */
diff --git a/dts/include/dt-bindings/interconnect/qcom,msm8916.h b/dts/include/dt-bindings/interconnect/qcom,msm8916.h
new file mode 100644
index 0000000000..359a75feb1
--- /dev/null
+++ b/dts/include/dt-bindings/interconnect/qcom,msm8916.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Qualcomm interconnect IDs
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
+
+#define BIMC_SNOC_SLV			0
+#define MASTER_JPEG			1
+#define MASTER_MDP_PORT0		2
+#define MASTER_QDSS_BAM			3
+#define MASTER_QDSS_ETR			4
+#define MASTER_SNOC_CFG			5
+#define MASTER_VFE			6
+#define MASTER_VIDEO_P0			7
+#define SNOC_MM_INT_0			8
+#define SNOC_MM_INT_1			9
+#define SNOC_MM_INT_2			10
+#define SNOC_MM_INT_BIMC		11
+#define PCNOC_SNOC_SLV			12
+#define SLAVE_APSS			13
+#define SLAVE_CATS_128			14
+#define SLAVE_OCMEM_64			15
+#define SLAVE_IMEM			16
+#define SLAVE_QDSS_STM			17
+#define SLAVE_SRVC_SNOC			18
+#define SNOC_BIMC_0_MAS			19
+#define SNOC_BIMC_1_MAS			20
+#define SNOC_INT_0			21
+#define SNOC_INT_1			22
+#define SNOC_INT_BIMC			23
+#define SNOC_PCNOC_MAS			24
+#define SNOC_QDSS_INT			25
+
+#define BIMC_SNOC_MAS			0
+#define MASTER_AMPSS_M0			1
+#define MASTER_GRAPHICS_3D		2
+#define MASTER_TCU0			3
+#define MASTER_TCU1			4
+#define SLAVE_AMPSS_L2			5
+#define SLAVE_EBI_CH0			6
+#define SNOC_BIMC_0_SLV			7
+#define SNOC_BIMC_1_SLV			8
+
+#define MASTER_BLSP_1			0
+#define MASTER_DEHR			1
+#define MASTER_LPASS			2
+#define MASTER_CRYPTO_CORE0		3
+#define MASTER_SDCC_1			4
+#define MASTER_SDCC_2			5
+#define MASTER_SPDM			6
+#define MASTER_USB_HS			7
+#define PCNOC_INT_0			8
+#define PCNOC_INT_1			9
+#define PCNOC_MAS_0			10
+#define PCNOC_MAS_1			11
+#define PCNOC_SLV_0			12
+#define PCNOC_SLV_1			13
+#define PCNOC_SLV_2			14
+#define PCNOC_SLV_3			15
+#define PCNOC_SLV_4			16
+#define PCNOC_SLV_8			17
+#define PCNOC_SLV_9			18
+#define PCNOC_SNOC_MAS			19
+#define SLAVE_BIMC_CFG			20
+#define SLAVE_BLSP_1			21
+#define SLAVE_BOOT_ROM			22
+#define SLAVE_CAMERA_CFG		23
+#define SLAVE_CLK_CTL			24
+#define SLAVE_CRYPTO_0_CFG		25
+#define SLAVE_DEHR_CFG			26
+#define SLAVE_DISPLAY_CFG		27
+#define SLAVE_GRAPHICS_3D_CFG		28
+#define SLAVE_IMEM_CFG			29
+#define SLAVE_LPASS			30
+#define SLAVE_MPM			31
+#define SLAVE_MSG_RAM			32
+#define SLAVE_MSS			33
+#define SLAVE_PDM			34
+#define SLAVE_PMIC_ARB			35
+#define SLAVE_PCNOC_CFG			36
+#define SLAVE_PRNG			37
+#define SLAVE_QDSS_CFG			38
+#define SLAVE_RBCPR_CFG			39
+#define SLAVE_SDCC_1			40
+#define SLAVE_SDCC_2			41
+#define SLAVE_SECURITY			42
+#define SLAVE_SNOC_CFG			43
+#define SLAVE_SPDM			44
+#define SLAVE_TCSR			45
+#define SLAVE_TLMM			46
+#define SLAVE_USB_HS			47
+#define SLAVE_VENUS_CFG			48
+#define SNOC_PCNOC_SLV			49
+
+#endif
diff --git a/dts/include/dt-bindings/interrupt-controller/aspeed-scu-ic.h b/dts/include/dt-bindings/interrupt-controller/aspeed-scu-ic.h
new file mode 100644
index 0000000000..f315d5a7f5
--- /dev/null
+++ b/dts/include/dt-bindings/interrupt-controller/aspeed-scu-ic.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ASPEED_SCU_IC_H_
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ASPEED_SCU_IC_H_
+
+#define ASPEED_SCU_IC_VGA_CURSOR_CHANGE			0
+#define ASPEED_SCU_IC_VGA_SCRATCH_REG_CHANGE		1
+
+#define ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI	2
+#define ASPEED_AST2500_SCU_IC_PCIE_RESET_HI_TO_LO	3
+#define ASPEED_AST2500_SCU_IC_LPC_RESET_LO_TO_HI	4
+#define ASPEED_AST2500_SCU_IC_LPC_RESET_HI_TO_LO	5
+#define ASPEED_AST2500_SCU_IC_ISSUE_MSI			6
+
+#define ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI	2
+#define ASPEED_AST2600_SCU_IC0_PCIE_PERST_HI_TO_LO	3
+#define ASPEED_AST2600_SCU_IC0_PCIE_RCRST_LO_TO_HI	4
+#define ASPEED_AST2600_SCU_IC0_PCIE_RCRST_HI_TO_LO	5
+
+#define ASPEED_AST2600_SCU_IC1_LPC_RESET_LO_TO_HI	0
+#define ASPEED_AST2600_SCU_IC1_LPC_RESET_HI_TO_LO	1
+
+#endif /* _DT_BINDINGS_INTERRUPT_CONTROLLER_ASPEED_SCU_IC_H_ */
diff --git a/dts/include/dt-bindings/memory/tegra186-mc.h b/dts/include/dt-bindings/memory/tegra186-mc.h
index 64813536ae..82a1e27f73 100644
--- a/dts/include/dt-bindings/memory/tegra186-mc.h
+++ b/dts/include/dt-bindings/memory/tegra186-mc.h
@@ -108,4 +108,143 @@
 #define TEGRA186_SID_SE_VM6		0x4e
 #define TEGRA186_SID_SE_VM7		0x4f
 
+/*
+ * memory client IDs
+ */
+
+/* Misses from System Memory Management Unit (SMMU) Page Table Cache (PTC) */
+#define TEGRA186_MEMORY_CLIENT_PTCR 0x00
+/* PCIE reads */
+#define TEGRA186_MEMORY_CLIENT_AFIR 0x0e
+/* High-definition audio (HDA) reads */
+#define TEGRA186_MEMORY_CLIENT_HDAR 0x15
+/* Host channel data reads */
+#define TEGRA186_MEMORY_CLIENT_HOST1XDMAR 0x16
+#define TEGRA186_MEMORY_CLIENT_NVENCSRD 0x1c
+/* SATA reads */
+#define TEGRA186_MEMORY_CLIENT_SATAR 0x1f
+/* Reads from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA186_MEMORY_CLIENT_MPCORER 0x27
+#define TEGRA186_MEMORY_CLIENT_NVENCSWR 0x2b
+/* PCIE writes */
+#define TEGRA186_MEMORY_CLIENT_AFIW 0x31
+/* High-definition audio (HDA) writes */
+#define TEGRA186_MEMORY_CLIENT_HDAW 0x35
+/* Writes from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA186_MEMORY_CLIENT_MPCOREW 0x39
+/* SATA writes */
+#define TEGRA186_MEMORY_CLIENT_SATAW 0x3d
+/* ISP Read client for Crossbar A */
+#define TEGRA186_MEMORY_CLIENT_ISPRA 0x44
+/* ISP Write client for Crossbar A */
+#define TEGRA186_MEMORY_CLIENT_ISPWA 0x46
+/* ISP Write client Crossbar B */
+#define TEGRA186_MEMORY_CLIENT_ISPWB 0x47
+/* XUSB reads */
+#define TEGRA186_MEMORY_CLIENT_XUSB_HOSTR 0x4a
+/* XUSB_HOST writes */
+#define TEGRA186_MEMORY_CLIENT_XUSB_HOSTW 0x4b
+/* XUSB reads */
+#define TEGRA186_MEMORY_CLIENT_XUSB_DEVR 0x4c
+/* XUSB_DEV writes */
+#define TEGRA186_MEMORY_CLIENT_XUSB_DEVW 0x4d
+/* TSEC Memory Return Data Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSRD 0x54
+/* TSEC Memory Write Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSWR 0x55
+/* 3D, ltcx reads instance 0 */
+#define TEGRA186_MEMORY_CLIENT_GPUSRD 0x58
+/* 3D, ltcx writes instance 0 */
+#define TEGRA186_MEMORY_CLIENT_GPUSWR 0x59
+/* sdmmca memory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCRA 0x60
+/* sdmmcbmemory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCRAA 0x61
+/* sdmmc memory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCR 0x62
+/* sdmmcd memory read client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmca memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCWA 0x64
+/* sdmmcb memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCWAA 0x65
+/* sdmmc memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCW 0x66
+/* sdmmcd memory write client */
+#define TEGRA186_MEMORY_CLIENT_SDMMCWAB 0x67
+#define TEGRA186_MEMORY_CLIENT_VICSRD 0x6c
+#define TEGRA186_MEMORY_CLIENT_VICSWR 0x6d
+/* VI Write client */
+#define TEGRA186_MEMORY_CLIENT_VIW 0x72
+#define TEGRA186_MEMORY_CLIENT_NVDECSRD 0x78
+#define TEGRA186_MEMORY_CLIENT_NVDECSWR 0x79
+/* Audio Processing (APE) engine reads */
+#define TEGRA186_MEMORY_CLIENT_APER 0x7a
+/* Audio Processing (APE) engine writes */
+#define TEGRA186_MEMORY_CLIENT_APEW 0x7b
+#define TEGRA186_MEMORY_CLIENT_NVJPGSRD 0x7e
+#define TEGRA186_MEMORY_CLIENT_NVJPGSWR 0x7f
+/* SE Memory Return Data Client Description */
+#define TEGRA186_MEMORY_CLIENT_SESRD 0x80
+/* SE Memory Write Client Description */
+#define TEGRA186_MEMORY_CLIENT_SESWR 0x81
+/* ETR reads */
+#define TEGRA186_MEMORY_CLIENT_ETRR 0x84
+/* ETR writes */
+#define TEGRA186_MEMORY_CLIENT_ETRW 0x85
+/* TSECB Memory Return Data Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSRDB 0x86
+/* TSECB Memory Write Client Description */
+#define TEGRA186_MEMORY_CLIENT_TSECSWRB 0x87
+/* 3D, ltcx reads instance 1 */
+#define TEGRA186_MEMORY_CLIENT_GPUSRD2 0x88
+/* 3D, ltcx writes instance 1 */
+#define TEGRA186_MEMORY_CLIENT_GPUSWR2 0x89
+/* AXI Switch read client */
+#define TEGRA186_MEMORY_CLIENT_AXISR 0x8c
+/* AXI Switch write client */
+#define TEGRA186_MEMORY_CLIENT_AXISW 0x8d
+/* EQOS read client */
+#define TEGRA186_MEMORY_CLIENT_EQOSR 0x8e
+/* EQOS write client */
+#define TEGRA186_MEMORY_CLIENT_EQOSW 0x8f
+/* UFSHC read client */
+#define TEGRA186_MEMORY_CLIENT_UFSHCR 0x90
+/* UFSHC write client */
+#define TEGRA186_MEMORY_CLIENT_UFSHCW 0x91
+/* NVDISPLAY read client */
+#define TEGRA186_MEMORY_CLIENT_NVDISPLAYR 0x92
+/* BPMP read client */
+#define TEGRA186_MEMORY_CLIENT_BPMPR 0x93
+/* BPMP write client */
+#define TEGRA186_MEMORY_CLIENT_BPMPW 0x94
+/* BPMPDMA read client */
+#define TEGRA186_MEMORY_CLIENT_BPMPDMAR 0x95
+/* BPMPDMA write client */
+#define TEGRA186_MEMORY_CLIENT_BPMPDMAW 0x96
+/* AON read client */
+#define TEGRA186_MEMORY_CLIENT_AONR 0x97
+/* AON write client */
+#define TEGRA186_MEMORY_CLIENT_AONW 0x98
+/* AONDMA read client */
+#define TEGRA186_MEMORY_CLIENT_AONDMAR 0x99
+/* AONDMA write client */
+#define TEGRA186_MEMORY_CLIENT_AONDMAW 0x9a
+/* SCE read client */
+#define TEGRA186_MEMORY_CLIENT_SCER 0x9b
+/* SCE write client */
+#define TEGRA186_MEMORY_CLIENT_SCEW 0x9c
+/* SCEDMA read client */
+#define TEGRA186_MEMORY_CLIENT_SCEDMAR 0x9d
+/* SCEDMA write client */
+#define TEGRA186_MEMORY_CLIENT_SCEDMAW 0x9e
+/* APEDMA read client */
+#define TEGRA186_MEMORY_CLIENT_APEDMAR 0x9f
+/* APEDMA write client */
+#define TEGRA186_MEMORY_CLIENT_APEDMAW 0xa0
+/* NVDISPLAY read client instance 2 */
+#define TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 0xa1
+#define TEGRA186_MEMORY_CLIENT_VICSRD1 0xa2
+#define TEGRA186_MEMORY_CLIENT_NVDECSRD1 0xa3
+
 #endif
diff --git a/dts/include/dt-bindings/memory/tegra194-mc.h b/dts/include/dt-bindings/memory/tegra194-mc.h
new file mode 100644
index 0000000000..eed48b746b
--- /dev/null
+++ b/dts/include/dt-bindings/memory/tegra194-mc.h
@@ -0,0 +1,410 @@
+#ifndef DT_BINDINGS_MEMORY_TEGRA194_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA194_MC_H
+
+/* special clients */
+#define TEGRA194_SID_INVALID		0x00
+#define TEGRA194_SID_PASSTHROUGH	0x7f
+
+/* host1x clients */
+#define TEGRA194_SID_HOST1X		0x01
+#define TEGRA194_SID_CSI		0x02
+#define TEGRA194_SID_VIC		0x03
+#define TEGRA194_SID_VI			0x04
+#define TEGRA194_SID_ISP		0x05
+#define TEGRA194_SID_NVDEC		0x06
+#define TEGRA194_SID_NVENC		0x07
+#define TEGRA194_SID_NVJPG		0x08
+#define TEGRA194_SID_NVDISPLAY		0x09
+#define TEGRA194_SID_TSEC		0x0a
+#define TEGRA194_SID_TSECB		0x0b
+#define TEGRA194_SID_SE			0x0c
+#define TEGRA194_SID_SE1		0x0d
+#define TEGRA194_SID_SE2		0x0e
+#define TEGRA194_SID_SE3		0x0f
+
+/* GPU clients */
+#define TEGRA194_SID_GPU		0x10
+
+/* other SoC clients */
+#define TEGRA194_SID_AFI		0x11
+#define TEGRA194_SID_HDA		0x12
+#define TEGRA194_SID_ETR		0x13
+#define TEGRA194_SID_EQOS		0x14
+#define TEGRA194_SID_UFSHC		0x15
+#define TEGRA194_SID_AON		0x16
+#define TEGRA194_SID_SDMMC4		0x17
+#define TEGRA194_SID_SDMMC3		0x18
+#define TEGRA194_SID_SDMMC2		0x19
+#define TEGRA194_SID_SDMMC1		0x1a
+#define TEGRA194_SID_XUSB_HOST		0x1b
+#define TEGRA194_SID_XUSB_DEV		0x1c
+#define TEGRA194_SID_SATA		0x1d
+#define TEGRA194_SID_APE		0x1e
+#define TEGRA194_SID_SCE		0x1f
+
+/* GPC DMA clients */
+#define TEGRA194_SID_GPCDMA_0		0x20
+#define TEGRA194_SID_GPCDMA_1		0x21
+#define TEGRA194_SID_GPCDMA_2		0x22
+#define TEGRA194_SID_GPCDMA_3		0x23
+#define TEGRA194_SID_GPCDMA_4		0x24
+#define TEGRA194_SID_GPCDMA_5		0x25
+#define TEGRA194_SID_GPCDMA_6		0x26
+#define TEGRA194_SID_GPCDMA_7		0x27
+
+/* APE DMA clients */
+#define TEGRA194_SID_APE_1		0x28
+#define TEGRA194_SID_APE_2		0x29
+
+/* camera RTCPU */
+#define TEGRA194_SID_RCE		0x2a
+
+/* camera RTCPU on host1x address space */
+#define TEGRA194_SID_RCE_1X		0x2b
+
+/* APE DMA clients */
+#define TEGRA194_SID_APE_3		0x2c
+
+/* camera RTCPU running on APE */
+#define TEGRA194_SID_APE_CAM		0x2d
+#define TEGRA194_SID_APE_CAM_1X		0x2e
+
+#define TEGRA194_SID_RCE_RM		0x2f
+#define TEGRA194_SID_VI_FALCON		0x30
+#define TEGRA194_SID_ISP_FALCON		0x31
+
+/*
+ * The BPMP has its SID value hardcoded in the firmware. Changing it requires
+ * considerable effort.
+ */
+#define TEGRA194_SID_BPMP		0x32
+
+/* for SMMU tests */
+#define TEGRA194_SID_SMMU_TEST		0x33
+
+/* host1x virtualization channels */
+#define TEGRA194_SID_HOST1X_CTX0	0x38
+#define TEGRA194_SID_HOST1X_CTX1	0x39
+#define TEGRA194_SID_HOST1X_CTX2	0x3a
+#define TEGRA194_SID_HOST1X_CTX3	0x3b
+#define TEGRA194_SID_HOST1X_CTX4	0x3c
+#define TEGRA194_SID_HOST1X_CTX5	0x3d
+#define TEGRA194_SID_HOST1X_CTX6	0x3e
+#define TEGRA194_SID_HOST1X_CTX7	0x3f
+
+/* host1x command buffers */
+#define TEGRA194_SID_HOST1X_VM0		0x40
+#define TEGRA194_SID_HOST1X_VM1		0x41
+#define TEGRA194_SID_HOST1X_VM2		0x42
+#define TEGRA194_SID_HOST1X_VM3		0x43
+#define TEGRA194_SID_HOST1X_VM4		0x44
+#define TEGRA194_SID_HOST1X_VM5		0x45
+#define TEGRA194_SID_HOST1X_VM6		0x46
+#define TEGRA194_SID_HOST1X_VM7		0x47
+
+/* SE data buffers */
+#define TEGRA194_SID_SE_VM0		0x48
+#define TEGRA194_SID_SE_VM1		0x49
+#define TEGRA194_SID_SE_VM2		0x4a
+#define TEGRA194_SID_SE_VM3		0x4b
+#define TEGRA194_SID_SE_VM4		0x4c
+#define TEGRA194_SID_SE_VM5		0x4d
+#define TEGRA194_SID_SE_VM6		0x4e
+#define TEGRA194_SID_SE_VM7		0x4f
+
+#define TEGRA194_SID_MIU		0x50
+
+#define TEGRA194_SID_NVDLA0		0x51
+#define TEGRA194_SID_NVDLA1		0x52
+
+#define TEGRA194_SID_PVA0		0x53
+#define TEGRA194_SID_PVA1		0x54
+#define TEGRA194_SID_NVENC1		0x55
+#define TEGRA194_SID_PCIE0		0x56
+#define TEGRA194_SID_PCIE1		0x57
+#define TEGRA194_SID_PCIE2		0x58
+#define TEGRA194_SID_PCIE3		0x59
+#define TEGRA194_SID_PCIE4		0x5a
+#define TEGRA194_SID_PCIE5		0x5b
+#define TEGRA194_SID_NVDEC1		0x5c
+
+#define TEGRA194_SID_XUSB_VF0		0x5d
+#define TEGRA194_SID_XUSB_VF1		0x5e
+#define TEGRA194_SID_XUSB_VF2		0x5f
+#define TEGRA194_SID_XUSB_VF3		0x60
+
+#define TEGRA194_SID_RCE_VM3		0x61
+#define TEGRA194_SID_VI_VM2		0x62
+#define TEGRA194_SID_VI_VM3		0x63
+#define TEGRA194_SID_RCE_SERVER		0x64
+
+/*
+ * memory client IDs
+ */
+
+/* Misses from System Memory Management Unit (SMMU) Page Table Cache (PTC) */
+#define TEGRA194_MEMORY_CLIENT_PTCR 0x00
+/* MSS internal memqual MIU7 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU7R 0x01
+/* MSS internal memqual MIU7 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU7W 0x02
+/* High-definition audio (HDA) read clients */
+#define TEGRA194_MEMORY_CLIENT_HDAR 0x15
+/* Host channel data read clients */
+#define TEGRA194_MEMORY_CLIENT_HOST1XDMAR 0x16
+#define TEGRA194_MEMORY_CLIENT_NVENCSRD 0x1c
+/* SATA read clients */
+#define TEGRA194_MEMORY_CLIENT_SATAR 0x1f
+/* Reads from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA194_MEMORY_CLIENT_MPCORER 0x27
+#define TEGRA194_MEMORY_CLIENT_NVENCSWR 0x2b
+/* High-definition audio (HDA) write clients */
+#define TEGRA194_MEMORY_CLIENT_HDAW 0x35
+/* Writes from Cortex-A9 4 CPU cores via the L2 cache */
+#define TEGRA194_MEMORY_CLIENT_MPCOREW 0x39
+/* SATA write clients */
+#define TEGRA194_MEMORY_CLIENT_SATAW 0x3d
+/* ISP read client for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPRA 0x44
+/* ISP read client 1 for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPFALR 0x45
+/* ISP Write client for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPWA 0x46
+/* ISP Write client Crossbar B */
+#define TEGRA194_MEMORY_CLIENT_ISPWB 0x47
+/* XUSB_HOST read clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_HOSTR 0x4a
+/* XUSB_HOST write clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_HOSTW 0x4b
+/* XUSB read clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_DEVR 0x4c
+/* XUSB_DEV write clients */
+#define TEGRA194_MEMORY_CLIENT_XUSB_DEVW 0x4d
+/* sdmmca memory read client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCRA 0x60
+/* sdmmc memory read client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCR 0x62
+/* sdmmcd memory read client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCRAB 0x63
+/* sdmmca memory write client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCWA 0x64
+/* sdmmc memory write client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCW 0x66
+/* sdmmcd memory write client */
+#define TEGRA194_MEMORY_CLIENT_SDMMCWAB 0x67
+#define TEGRA194_MEMORY_CLIENT_VICSRD 0x6c
+#define TEGRA194_MEMORY_CLIENT_VICSWR 0x6d
+/* VI Write client */
+#define TEGRA194_MEMORY_CLIENT_VIW 0x72
+#define TEGRA194_MEMORY_CLIENT_NVDECSRD 0x78
+#define TEGRA194_MEMORY_CLIENT_NVDECSWR 0x79
+/* Audio Processing (APE) engine read clients */
+#define TEGRA194_MEMORY_CLIENT_APER 0x7a
+/* Audio Processing (APE) engine write clients */
+#define TEGRA194_MEMORY_CLIENT_APEW 0x7b
+#define TEGRA194_MEMORY_CLIENT_NVJPGSRD 0x7e
+#define TEGRA194_MEMORY_CLIENT_NVJPGSWR 0x7f
+/* AXI AP and DFD-AUX0/1 read clients Both share the same interface on the on MSS */
+#define TEGRA194_MEMORY_CLIENT_AXIAPR 0x82
+/* AXI AP and DFD-AUX0/1 write clients Both sahre the same interface on MSS */
+#define TEGRA194_MEMORY_CLIENT_AXIAPW 0x83
+/* ETR read clients */
+#define TEGRA194_MEMORY_CLIENT_ETRR 0x84
+/* ETR write clients */
+#define TEGRA194_MEMORY_CLIENT_ETRW 0x85
+/* AXI Switch read client */
+#define TEGRA194_MEMORY_CLIENT_AXISR 0x8c
+/* AXI Switch write client */
+#define TEGRA194_MEMORY_CLIENT_AXISW 0x8d
+/* EQOS read client */
+#define TEGRA194_MEMORY_CLIENT_EQOSR 0x8e
+/* EQOS write client */
+#define TEGRA194_MEMORY_CLIENT_EQOSW 0x8f
+/* UFSHC read client */
+#define TEGRA194_MEMORY_CLIENT_UFSHCR 0x90
+/* UFSHC write client */
+#define TEGRA194_MEMORY_CLIENT_UFSHCW 0x91
+/* NVDISPLAY read client */
+#define TEGRA194_MEMORY_CLIENT_NVDISPLAYR 0x92
+/* BPMP read client */
+#define TEGRA194_MEMORY_CLIENT_BPMPR 0x93
+/* BPMP write client */
+#define TEGRA194_MEMORY_CLIENT_BPMPW 0x94
+/* BPMPDMA read client */
+#define TEGRA194_MEMORY_CLIENT_BPMPDMAR 0x95
+/* BPMPDMA write client */
+#define TEGRA194_MEMORY_CLIENT_BPMPDMAW 0x96
+/* AON read client */
+#define TEGRA194_MEMORY_CLIENT_AONR 0x97
+/* AON write client */
+#define TEGRA194_MEMORY_CLIENT_AONW 0x98
+/* AONDMA read client */
+#define TEGRA194_MEMORY_CLIENT_AONDMAR 0x99
+/* AONDMA write client */
+#define TEGRA194_MEMORY_CLIENT_AONDMAW 0x9a
+/* SCE read client */
+#define TEGRA194_MEMORY_CLIENT_SCER 0x9b
+/* SCE write client */
+#define TEGRA194_MEMORY_CLIENT_SCEW 0x9c
+/* SCEDMA read client */
+#define TEGRA194_MEMORY_CLIENT_SCEDMAR 0x9d
+/* SCEDMA write client */
+#define TEGRA194_MEMORY_CLIENT_SCEDMAW 0x9e
+/* APEDMA read client */
+#define TEGRA194_MEMORY_CLIENT_APEDMAR 0x9f
+/* APEDMA write client */
+#define TEGRA194_MEMORY_CLIENT_APEDMAW 0xa0
+/* NVDISPLAY read client instance 2 */
+#define TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 0xa1
+#define TEGRA194_MEMORY_CLIENT_VICSRD1 0xa2
+#define TEGRA194_MEMORY_CLIENT_NVDECSRD1 0xa3
+/* MSS internal memqual MIU0 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU0R 0xa6
+/* MSS internal memqual MIU0 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU0W 0xa7
+/* MSS internal memqual MIU1 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU1R 0xa8
+/* MSS internal memqual MIU1 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU1W 0xa9
+/* MSS internal memqual MIU2 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU2R 0xae
+/* MSS internal memqual MIU2 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU2W 0xaf
+/* MSS internal memqual MIU3 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU3R 0xb0
+/* MSS internal memqual MIU3 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU3W 0xb1
+/* MSS internal memqual MIU4 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU4R 0xb2
+/* MSS internal memqual MIU4 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU4W 0xb3
+#define TEGRA194_MEMORY_CLIENT_DPMUR 0xb4
+#define TEGRA194_MEMORY_CLIENT_DPMUW 0xb5
+#define TEGRA194_MEMORY_CLIENT_NVL0R 0xb6
+#define TEGRA194_MEMORY_CLIENT_NVL0W 0xb7
+#define TEGRA194_MEMORY_CLIENT_NVL1R 0xb8
+#define TEGRA194_MEMORY_CLIENT_NVL1W 0xb9
+#define TEGRA194_MEMORY_CLIENT_NVL2R 0xba
+#define TEGRA194_MEMORY_CLIENT_NVL2W 0xbb
+/* VI FLACON read clients */
+#define TEGRA194_MEMORY_CLIENT_VIFALR 0xbc
+/* VIFAL write clients */
+#define TEGRA194_MEMORY_CLIENT_VIFALW 0xbd
+/* DLA0ARDA read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0RDA 0xbe
+/* DLA0 Falcon read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0FALRDB 0xbf
+/* DLA0 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0WRA 0xc0
+/* DLA0 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0FALWRB 0xc1
+/* DLA1ARDA read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1RDA 0xc2
+/* DLA1 Falcon read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1FALRDB 0xc3
+/* DLA1 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1WRA 0xc4
+/* DLA1 write clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1FALWRB 0xc5
+/* PVA0RDA read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDA 0xc6
+/* PVA0RDB read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDB 0xc7
+/* PVA0RDC read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDC 0xc8
+/* PVA0WRA write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0WRA 0xc9
+/* PVA0WRB write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0WRB 0xca
+/* PVA0WRC write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0WRC 0xcb
+/* PVA1RDA read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDA 0xcc
+/* PVA1RDB read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDB 0xcd
+/* PVA1RDC read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDC 0xce
+/* PVA1WRA write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1WRA 0xcf
+/* PVA1WRB write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1WRB 0xd0
+/* PVA1WRC write clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1WRC 0xd1
+/* RCE read client */
+#define TEGRA194_MEMORY_CLIENT_RCER 0xd2
+/* RCE write client */
+#define TEGRA194_MEMORY_CLIENT_RCEW 0xd3
+/* RCEDMA read client */
+#define TEGRA194_MEMORY_CLIENT_RCEDMAR 0xd4
+/* RCEDMA write client */
+#define TEGRA194_MEMORY_CLIENT_RCEDMAW 0xd5
+#define TEGRA194_MEMORY_CLIENT_NVENC1SRD 0xd6
+#define TEGRA194_MEMORY_CLIENT_NVENC1SWR 0xd7
+/* PCIE0 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE0R 0xd8
+/* PCIE0 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE0W 0xd9
+/* PCIE1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE1R 0xda
+/* PCIE1 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE1W 0xdb
+/* PCIE2 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE2AR 0xdc
+/* PCIE2 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE2AW 0xdd
+/* PCIE3 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE3R 0xde
+/* PCIE3 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE3W 0xdf
+/* PCIE4 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE4R 0xe0
+/* PCIE4 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE4W 0xe1
+/* PCIE5 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE5R 0xe2
+/* PCIE5 write clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE5W 0xe3
+/* ISP read client 1 for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPFALW 0xe4
+#define TEGRA194_MEMORY_CLIENT_NVL3R 0xe5
+#define TEGRA194_MEMORY_CLIENT_NVL3W 0xe6
+#define TEGRA194_MEMORY_CLIENT_NVL4R 0xe7
+#define TEGRA194_MEMORY_CLIENT_NVL4W 0xe8
+/* DLA0ARDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA0RDA1 0xe9
+/* DLA1ARDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_DLA1RDA1 0xea
+/* PVA0RDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDA1 0xeb
+/* PVA0RDB1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA0RDB1 0xec
+/* PVA1RDA1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDA1 0xed
+/* PVA1RDB1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PVA1RDB1 0xee
+/* PCIE5r1 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE5R1 0xef
+#define TEGRA194_MEMORY_CLIENT_NVENCSRD1 0xf0
+#define TEGRA194_MEMORY_CLIENT_NVENC1SRD1 0xf1
+/* ISP read client for Crossbar A */
+#define TEGRA194_MEMORY_CLIENT_ISPRA1 0xf2
+/* PCIE0 read clients */
+#define TEGRA194_MEMORY_CLIENT_PCIE0R1 0xf3
+#define TEGRA194_MEMORY_CLIENT_NVL0RHP 0xf4
+#define TEGRA194_MEMORY_CLIENT_NVL1RHP 0xf5
+#define TEGRA194_MEMORY_CLIENT_NVL2RHP 0xf6
+#define TEGRA194_MEMORY_CLIENT_NVL3RHP 0xf7
+#define TEGRA194_MEMORY_CLIENT_NVL4RHP 0xf8
+#define TEGRA194_MEMORY_CLIENT_NVDEC1SRD 0xf9
+#define TEGRA194_MEMORY_CLIENT_NVDEC1SRD1 0xfa
+#define TEGRA194_MEMORY_CLIENT_NVDEC1SWR 0xfb
+/* MSS internal memqual MIU5 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU5R 0xfc
+/* MSS internal memqual MIU5 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU5W 0xfd
+/* MSS internal memqual MIU6 read clients */
+#define TEGRA194_MEMORY_CLIENT_MIU6R 0xfe
+/* MSS internal memqual MIU6 write clients */
+#define TEGRA194_MEMORY_CLIENT_MIU6W 0xff
+
+#endif
diff --git a/dts/include/dt-bindings/phy/phy.h b/dts/include/dt-bindings/phy/phy.h
index b6a1eaf1b3..1f3f866fae 100644
--- a/dts/include/dt-bindings/phy/phy.h
+++ b/dts/include/dt-bindings/phy/phy.h
@@ -16,5 +16,6 @@
 #define PHY_TYPE_USB2		3
 #define PHY_TYPE_USB3		4
 #define PHY_TYPE_UFS		5
+#define PHY_TYPE_DP		6
 
 #endif /* _DT_BINDINGS_PHY */
diff --git a/dts/include/dt-bindings/power/mt6765-power.h b/dts/include/dt-bindings/power/mt6765-power.h
new file mode 100644
index 0000000000..d347b4ee9e
--- /dev/null
+++ b/dts/include/dt-bindings/power/mt6765-power.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DT_BINDINGS_POWER_MT6765_POWER_H
+#define _DT_BINDINGS_POWER_MT6765_POWER_H
+
+#define MT6765_POWER_DOMAIN_CONN		0
+#define MT6765_POWER_DOMAIN_MM			1
+#define MT6765_POWER_DOMAIN_MFG_ASYNC		2
+#define MT6765_POWER_DOMAIN_ISP			3
+#define MT6765_POWER_DOMAIN_MFG			4
+#define MT6765_POWER_DOMAIN_MFG_CORE0		5
+#define MT6765_POWER_DOMAIN_CAM			6
+#define MT6765_POWER_DOMAIN_VCODEC		7
+
+#endif /* _DT_BINDINGS_POWER_MT6765_POWER_H */
diff --git a/dts/include/dt-bindings/power/qcom-rpmpd.h b/dts/include/dt-bindings/power/qcom-rpmpd.h
index f05f8b1808..3f74096d5a 100644
--- a/dts/include/dt-bindings/power/qcom-rpmpd.h
+++ b/dts/include/dt-bindings/power/qcom-rpmpd.h
@@ -15,12 +15,36 @@
 #define SDM845_GFX	7
 #define SDM845_MSS	8
 
+/* SM8150 Power Domain Indexes */
+#define SM8150_MSS	0
+#define SM8150_EBI	1
+#define SM8150_LMX	2
+#define SM8150_LCX	3
+#define SM8150_GFX	4
+#define SM8150_MX	5
+#define SM8150_MX_AO	6
+#define SM8150_CX	7
+#define SM8150_CX_AO	8
+#define SM8150_MMCX	9
+#define SM8150_MMCX_AO	10
+
+/* SC7180 Power Domain Indexes */
+#define SC7180_CX	0
+#define SC7180_CX_AO	1
+#define SC7180_GFX	2
+#define SC7180_MX	3
+#define SC7180_MX_AO	4
+#define SC7180_LMX	5
+#define SC7180_LCX	6
+#define SC7180_MSS	7
+
 /* SDM845 Power Domain performance levels */
 #define RPMH_REGULATOR_LEVEL_RETENTION	16
 #define RPMH_REGULATOR_LEVEL_MIN_SVS	48
 #define RPMH_REGULATOR_LEVEL_LOW_SVS	64
 #define RPMH_REGULATOR_LEVEL_SVS	128
 #define RPMH_REGULATOR_LEVEL_SVS_L1	192
+#define RPMH_REGULATOR_LEVEL_SVS_L2	224
 #define RPMH_REGULATOR_LEVEL_NOM	256
 #define RPMH_REGULATOR_LEVEL_NOM_L1	320
 #define RPMH_REGULATOR_LEVEL_NOM_L2	336
diff --git a/dts/include/dt-bindings/reset-controller/mt2712-resets.h b/dts/include/dt-bindings/reset-controller/mt2712-resets.h
new file mode 100644
index 0000000000..9e7ee762f0
--- /dev/null
+++ b/dts/include/dt-bindings/reset-controller/mt2712-resets.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Yong Liang <yong.liang@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT2712
+#define _DT_BINDINGS_RESET_CONTROLLER_MT2712
+
+#define MT2712_TOPRGU_INFRA_SW_RST				0
+#define MT2712_TOPRGU_MM_SW_RST					1
+#define MT2712_TOPRGU_MFG_SW_RST				2
+#define MT2712_TOPRGU_VENC_SW_RST				3
+#define MT2712_TOPRGU_VDEC_SW_RST				4
+#define MT2712_TOPRGU_IMG_SW_RST				5
+#define MT2712_TOPRGU_INFRA_AO_SW_RST				8
+#define MT2712_TOPRGU_USB_SW_RST				9
+#define MT2712_TOPRGU_APMIXED_SW_RST				10
+
+#define MT2712_TOPRGU_SW_RST_NUM				11
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT2712 */
diff --git a/dts/include/dt-bindings/reset-controller/mt8183-resets.h b/dts/include/dt-bindings/reset-controller/mt8183-resets.h
index 8804e34ebd..a1bbd41e0d 100644
--- a/dts/include/dt-bindings/reset-controller/mt8183-resets.h
+++ b/dts/include/dt-bindings/reset-controller/mt8183-resets.h
@@ -78,4 +78,21 @@
 #define MT8183_INFRACFG_AO_I2C7_SW_RST				126
 #define MT8183_INFRACFG_AO_I2C8_SW_RST				127
 
+#define MT8183_INFRACFG_SW_RST_NUM				128
+
+#define MT8183_TOPRGU_MM_SW_RST					1
+#define MT8183_TOPRGU_MFG_SW_RST				2
+#define MT8183_TOPRGU_VENC_SW_RST				3
+#define MT8183_TOPRGU_VDEC_SW_RST				4
+#define MT8183_TOPRGU_IMG_SW_RST				5
+#define MT8183_TOPRGU_MD_SW_RST					7
+#define MT8183_TOPRGU_CONN_SW_RST				9
+#define MT8183_TOPRGU_CONN_MCU_SW_RST				12
+#define MT8183_TOPRGU_IPU0_SW_RST				14
+#define MT8183_TOPRGU_IPU1_SW_RST				15
+#define MT8183_TOPRGU_AUDIO_SW_RST				17
+#define MT8183_TOPRGU_CAMSYS_SW_RST				18
+
+#define MT8183_TOPRGU_SW_RST_NUM				19
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8183 */
diff --git a/dts/include/dt-bindings/reset/amlogic,meson8b-reset.h b/dts/include/dt-bindings/reset/amlogic,meson8b-reset.h
index c614438bcb..fbc524a900 100644
--- a/dts/include/dt-bindings/reset/amlogic,meson8b-reset.h
+++ b/dts/include/dt-bindings/reset/amlogic,meson8b-reset.h
@@ -46,9 +46,9 @@
 #define RESET_VD_RMEM			64
 #define RESET_AUDIN			65
 #define RESET_DBLK			66
-#define RESET_PIC_DC			66
-#define RESET_PSC			66
-#define RESET_NAND			66
+#define RESET_PIC_DC			67
+#define RESET_PSC			68
+#define RESET_NAND			69
 #define RESET_GE2D			70
 #define RESET_PARSER_REG		71
 #define RESET_PARSER_FETCH		72
diff --git a/dts/include/dt-bindings/reset/nuvoton,npcm7xx-reset.h b/dts/include/dt-bindings/reset/nuvoton,npcm7xx-reset.h
new file mode 100644
index 0000000000..df088e68a9
--- /dev/null
+++ b/dts/include/dt-bindings/reset/nuvoton,npcm7xx-reset.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (c) 2019 Nuvoton Technology corporation.
+
+#ifndef _DT_BINDINGS_NPCM7XX_RESET_H
+#define _DT_BINDINGS_NPCM7XX_RESET_H
+
+#define NPCM7XX_RESET_IPSRST1		0x20
+#define NPCM7XX_RESET_IPSRST2		0x24
+#define NPCM7XX_RESET_IPSRST3		0x34
+
+/* Reset lines on IP1 reset module (NPCM7XX_RESET_IPSRST1) */
+#define NPCM7XX_RESET_FIU3		1
+#define NPCM7XX_RESET_UDC1		5
+#define NPCM7XX_RESET_EMC1		6
+#define NPCM7XX_RESET_UART_2_3		7
+#define NPCM7XX_RESET_UDC2		8
+#define NPCM7XX_RESET_PECI		9
+#define NPCM7XX_RESET_AES		10
+#define NPCM7XX_RESET_UART_0_1		11
+#define NPCM7XX_RESET_MC		12
+#define NPCM7XX_RESET_SMB2		13
+#define NPCM7XX_RESET_SMB3		14
+#define NPCM7XX_RESET_SMB4		15
+#define NPCM7XX_RESET_SMB5		16
+#define NPCM7XX_RESET_PWM_M0		18
+#define NPCM7XX_RESET_TIMER_0_4		19
+#define NPCM7XX_RESET_TIMER_5_9		20
+#define NPCM7XX_RESET_EMC2		21
+#define NPCM7XX_RESET_UDC4		22
+#define NPCM7XX_RESET_UDC5		23
+#define NPCM7XX_RESET_UDC6		24
+#define NPCM7XX_RESET_UDC3		25
+#define NPCM7XX_RESET_ADC		27
+#define NPCM7XX_RESET_SMB6		28
+#define NPCM7XX_RESET_SMB7		29
+#define NPCM7XX_RESET_SMB0		30
+#define NPCM7XX_RESET_SMB1		31
+
+/* Reset lines on IP2 reset module (NPCM7XX_RESET_IPSRST2) */
+#define NPCM7XX_RESET_MFT0		0
+#define NPCM7XX_RESET_MFT1		1
+#define NPCM7XX_RESET_MFT2		2
+#define NPCM7XX_RESET_MFT3		3
+#define NPCM7XX_RESET_MFT4		4
+#define NPCM7XX_RESET_MFT5		5
+#define NPCM7XX_RESET_MFT6		6
+#define NPCM7XX_RESET_MFT7		7
+#define NPCM7XX_RESET_MMC		8
+#define NPCM7XX_RESET_SDHC		9
+#define NPCM7XX_RESET_GFX_SYS		10
+#define NPCM7XX_RESET_AHB_PCIBRG	11
+#define NPCM7XX_RESET_VDMA		12
+#define NPCM7XX_RESET_ECE		13
+#define NPCM7XX_RESET_VCD		14
+#define NPCM7XX_RESET_OTP		16
+#define NPCM7XX_RESET_SIOX1		18
+#define NPCM7XX_RESET_SIOX2		19
+#define NPCM7XX_RESET_3DES		21
+#define NPCM7XX_RESET_PSPI1		22
+#define NPCM7XX_RESET_PSPI2		23
+#define NPCM7XX_RESET_GMAC2		25
+#define NPCM7XX_RESET_USB_HOST		26
+#define NPCM7XX_RESET_GMAC1		28
+#define NPCM7XX_RESET_CP		31
+
+/* Reset lines on IP3 reset module (NPCM7XX_RESET_IPSRST3) */
+#define NPCM7XX_RESET_PWM_M1		0
+#define NPCM7XX_RESET_SMB12		1
+#define NPCM7XX_RESET_SPIX		2
+#define NPCM7XX_RESET_SMB13		3
+#define NPCM7XX_RESET_UDC0		4
+#define NPCM7XX_RESET_UDC7		5
+#define NPCM7XX_RESET_UDC8		6
+#define NPCM7XX_RESET_UDC9		7
+#define NPCM7XX_RESET_PCI_MAILBOX	9
+#define NPCM7XX_RESET_SMB14		12
+#define NPCM7XX_RESET_SHA		13
+#define NPCM7XX_RESET_SEC_ECC		14
+#define NPCM7XX_RESET_PCIE_RC		15
+#define NPCM7XX_RESET_TIMER_10_14	16
+#define NPCM7XX_RESET_RNG		17
+#define NPCM7XX_RESET_SMB15		18
+#define NPCM7XX_RESET_SMB8		19
+#define NPCM7XX_RESET_SMB9		20
+#define NPCM7XX_RESET_SMB10		21
+#define NPCM7XX_RESET_SMB11		22
+#define NPCM7XX_RESET_ESPI		23
+#define NPCM7XX_RESET_USB_PHY_1		24
+#define NPCM7XX_RESET_USB_PHY_2		25
+
+#endif
diff --git a/dts/include/dt-bindings/reset/qcom,gcc-ipq6018.h b/dts/include/dt-bindings/reset/qcom,gcc-ipq6018.h
new file mode 100644
index 0000000000..02a220ad01
--- /dev/null
+++ b/dts/include/dt-bindings/reset/qcom,gcc-ipq6018.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_RESET_IPQ_GCC_6018_H
+#define _DT_BINDINGS_RESET_IPQ_GCC_6018_H
+
+#define GCC_BLSP1_BCR				0
+#define GCC_BLSP1_QUP1_BCR			1
+#define GCC_BLSP1_UART1_BCR			2
+#define GCC_BLSP1_QUP2_BCR			3
+#define GCC_BLSP1_UART2_BCR			4
+#define GCC_BLSP1_QUP3_BCR			5
+#define GCC_BLSP1_UART3_BCR			6
+#define GCC_BLSP1_QUP4_BCR			7
+#define GCC_BLSP1_UART4_BCR			8
+#define GCC_BLSP1_QUP5_BCR			9
+#define GCC_BLSP1_UART5_BCR			10
+#define GCC_BLSP1_QUP6_BCR			11
+#define GCC_BLSP1_UART6_BCR			12
+#define GCC_IMEM_BCR				13
+#define GCC_SMMU_BCR				14
+#define GCC_APSS_TCU_BCR			15
+#define GCC_SMMU_XPU_BCR			16
+#define GCC_PCNOC_TBU_BCR			17
+#define GCC_SMMU_CFG_BCR			18
+#define GCC_PRNG_BCR				19
+#define GCC_BOOT_ROM_BCR			20
+#define GCC_CRYPTO_BCR				21
+#define GCC_WCSS_BCR				22
+#define GCC_WCSS_Q6_BCR				23
+#define GCC_NSS_BCR				24
+#define GCC_SEC_CTRL_BCR			25
+#define GCC_DDRSS_BCR				26
+#define GCC_SYSTEM_NOC_BCR			27
+#define GCC_PCNOC_BCR				28
+#define GCC_TCSR_BCR				29
+#define GCC_QDSS_BCR				30
+#define GCC_DCD_BCR				31
+#define GCC_MSG_RAM_BCR				32
+#define GCC_MPM_BCR				33
+#define GCC_SPDM_BCR				34
+#define GCC_RBCPR_BCR				35
+#define GCC_RBCPR_MX_BCR			36
+#define GCC_TLMM_BCR				37
+#define GCC_RBCPR_WCSS_BCR			38
+#define GCC_USB0_PHY_BCR			39
+#define GCC_USB3PHY_0_PHY_BCR			40
+#define GCC_USB0_BCR				41
+#define GCC_USB1_BCR				42
+#define GCC_QUSB2_0_PHY_BCR			43
+#define GCC_QUSB2_1_PHY_BCR			44
+#define GCC_SDCC1_BCR				45
+#define GCC_SNOC_BUS_TIMEOUT0_BCR		46
+#define GCC_SNOC_BUS_TIMEOUT1_BCR		47
+#define GCC_SNOC_BUS_TIMEOUT2_BCR		48
+#define GCC_PCNOC_BUS_TIMEOUT0_BCR		49
+#define GCC_PCNOC_BUS_TIMEOUT1_BCR		50
+#define GCC_PCNOC_BUS_TIMEOUT2_BCR		51
+#define GCC_PCNOC_BUS_TIMEOUT3_BCR		52
+#define GCC_PCNOC_BUS_TIMEOUT4_BCR		53
+#define GCC_PCNOC_BUS_TIMEOUT5_BCR		54
+#define GCC_PCNOC_BUS_TIMEOUT6_BCR		55
+#define GCC_PCNOC_BUS_TIMEOUT7_BCR		56
+#define GCC_PCNOC_BUS_TIMEOUT8_BCR		57
+#define GCC_PCNOC_BUS_TIMEOUT9_BCR		58
+#define GCC_UNIPHY0_BCR				59
+#define GCC_UNIPHY1_BCR				60
+#define GCC_CMN_12GPLL_BCR			61
+#define GCC_QPIC_BCR				62
+#define GCC_MDIO_BCR				63
+#define GCC_WCSS_CORE_TBU_BCR			64
+#define GCC_WCSS_Q6_TBU_BCR			65
+#define GCC_USB0_TBU_BCR			66
+#define GCC_PCIE0_TBU_BCR			67
+#define GCC_PCIE0_BCR				68
+#define GCC_PCIE0_PHY_BCR			69
+#define GCC_PCIE0PHY_PHY_BCR			70
+#define GCC_PCIE0_LINK_DOWN_BCR			71
+#define GCC_DCC_BCR				72
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR	73
+#define GCC_SMMU_CATS_BCR			74
+#define GCC_UBI0_AXI_ARES			75
+#define GCC_UBI0_AHB_ARES			76
+#define GCC_UBI0_NC_AXI_ARES			77
+#define GCC_UBI0_DBG_ARES			78
+#define GCC_UBI0_CORE_CLAMP_ENABLE		79
+#define GCC_UBI0_CLKRST_CLAMP_ENABLE		80
+#define GCC_UBI0_UTCM_ARES			81
+#define GCC_NSS_CFG_ARES			82
+#define GCC_NSS_NOC_ARES			83
+#define GCC_NSS_CRYPTO_ARES			84
+#define GCC_NSS_CSR_ARES			85
+#define GCC_NSS_CE_APB_ARES			86
+#define GCC_NSS_CE_AXI_ARES			87
+#define GCC_NSSNOC_CE_APB_ARES			88
+#define GCC_NSSNOC_CE_AXI_ARES			89
+#define GCC_NSSNOC_UBI0_AHB_ARES		90
+#define GCC_NSSNOC_SNOC_ARES			91
+#define GCC_NSSNOC_CRYPTO_ARES			92
+#define GCC_NSSNOC_ATB_ARES			93
+#define GCC_NSSNOC_QOSGEN_REF_ARES		94
+#define GCC_NSSNOC_TIMEOUT_REF_ARES		95
+#define GCC_PCIE0_PIPE_ARES			96
+#define GCC_PCIE0_SLEEP_ARES			97
+#define GCC_PCIE0_CORE_STICKY_ARES		98
+#define GCC_PCIE0_AXI_MASTER_ARES		99
+#define GCC_PCIE0_AXI_SLAVE_ARES		100
+#define GCC_PCIE0_AHB_ARES			101
+#define GCC_PCIE0_AXI_MASTER_STICKY_ARES	102
+#define GCC_PCIE0_AXI_SLAVE_STICKY_ARES		103
+#define GCC_PPE_FULL_RESET			104
+#define GCC_UNIPHY0_SOFT_RESET			105
+#define GCC_UNIPHY0_XPCS_RESET			106
+#define GCC_UNIPHY1_SOFT_RESET			107
+#define GCC_UNIPHY1_XPCS_RESET			108
+#define GCC_EDMA_HW_RESET			109
+#define GCC_ADSS_BCR				110
+#define GCC_NSS_NOC_TBU_BCR			111
+#define GCC_NSSPORT1_RESET			112
+#define GCC_NSSPORT2_RESET			113
+#define GCC_NSSPORT3_RESET			114
+#define GCC_NSSPORT4_RESET			115
+#define GCC_NSSPORT5_RESET			116
+#define GCC_UNIPHY0_PORT1_ARES			117
+#define GCC_UNIPHY0_PORT2_ARES			118
+#define GCC_UNIPHY0_PORT3_ARES			119
+#define GCC_UNIPHY0_PORT4_ARES			120
+#define GCC_UNIPHY0_PORT5_ARES			121
+#define GCC_UNIPHY0_PORT_4_5_RESET		122
+#define GCC_UNIPHY0_PORT_4_RESET		123
+#define GCC_LPASS_BCR				124
+#define GCC_UBI32_TBU_BCR			125
+#define GCC_LPASS_TBU_BCR			126
+#define GCC_WCSSAON_RESET			127
+#define GCC_LPASS_Q6_AXIM_ARES			128
+#define GCC_LPASS_Q6SS_TSCTR_1TO2_ARES		129
+#define GCC_LPASS_Q6SS_TRIG_ARES		130
+#define GCC_LPASS_Q6_ATBM_AT_ARES		131
+#define GCC_LPASS_Q6_PCLKDBG_ARES		132
+#define GCC_LPASS_CORE_AXIM_ARES		133
+#define GCC_LPASS_SNOC_CFG_ARES			134
+#define GCC_WCSS_DBG_ARES			135
+#define GCC_WCSS_ECAHB_ARES			136
+#define GCC_WCSS_ACMT_ARES			137
+#define GCC_WCSS_DBG_BDG_ARES			138
+#define GCC_WCSS_AHB_S_ARES			139
+#define GCC_WCSS_AXI_M_ARES			140
+#define GCC_Q6SS_DBG_ARES			141
+#define GCC_Q6_AHB_S_ARES			142
+#define GCC_Q6_AHB_ARES				143
+#define GCC_Q6_AXIM2_ARES			144
+#define GCC_Q6_AXIM_ARES			145
+#define GCC_UBI0_CORE_ARES			146
+
+#endif
diff --git a/dts/include/dt-bindings/thermal/thermal_exynos.h b/dts/include/dt-bindings/thermal/thermal_exynos.h
index 642e4e7f40..52fcb51dda 100644
--- a/dts/include/dt-bindings/thermal/thermal_exynos.h
+++ b/dts/include/dt-bindings/thermal/thermal_exynos.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * thermal_exynos.h - Samsung EXYNOS TMU device tree definitions
+ * thermal_exynos.h - Samsung Exynos TMU device tree definitions
  *
  *  Copyright (C) 2014 Samsung Electronics
  *  Lukasz Majewski <l.majewski@samsung.com>
diff --git a/dts/src/arc/axs10x_mb.dtsi b/dts/src/arc/axs10x_mb.dtsi
index f9a5c9ddca..1d109b06e7 100644
--- a/dts/src/arc/axs10x_mb.dtsi
+++ b/dts/src/arc/axs10x_mb.dtsi
@@ -78,6 +78,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
diff --git a/dts/src/arm/am335x-boneblack-common.dtsi b/dts/src/arm/am335x-boneblack-common.dtsi
index 7ad079861e..91f93bc897 100644
--- a/dts/src/arm/am335x-boneblack-common.dtsi
+++ b/dts/src/arm/am335x-boneblack-common.dtsi
@@ -131,6 +131,11 @@
 };
 
 / {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
 	clk_mcasp0_fixed: clk_mcasp0_fixed {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts
index 6f0a6be930..68252dab32 100644
--- a/dts/src/arm/am335x-evm.dts
+++ b/dts/src/arm/am335x-evm.dts
@@ -113,7 +113,7 @@
 		};
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -121,35 +121,15 @@
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
+		compatible = "tfc,s9700rtwv43tr-01b";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
+		backlight = <&backlight>;
 
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@@ -500,6 +480,12 @@
 	status = "okay";
 
 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };
 
 &elm {
diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts
index a97f9df460..32f515a295 100644
--- a/dts/src/arm/am335x-evmsk.dts
+++ b/dts/src/arm/am335x-evmsk.dts
@@ -183,36 +183,16 @@
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&lcd_pins_default>;
 		pinctrl-1 = <&lcd_pins_sleep>;
 		backlight = <&lcd_bl>;
-		status = "okay";
-		panel-info {
-			ac-bias		= <255>;
-			ac-bias-intrpt	= <0>;
-			dma-burst-sz	= <16>;
-			bpp		= <32>;
-			fdd		= <0x80>;
-			sync-edge	= <0>;
-			sync-ctrl	= <1>;
-			raster-order	= <0>;
-			fifo-th		= <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive		= <480>;
-				vactive		= <272>;
-				hback-porch	= <43>;
-				hfront-porch	= <8>;
-				hsync-len	= <4>;
-				vback-porch	= <12>;
-				vfront-porch	= <4>;
-				vsync-len	= <10>;
-				clock-frequency = <9000000>;
-				hsync-active	= <0>;
-				vsync-active	= <0>;
+
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@@ -725,6 +705,12 @@
 	status = "okay";
 
 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };
 
 &rtc {
diff --git a/dts/src/arm/am335x-icev2.dts b/dts/src/arm/am335x-icev2.dts
index 204bccfcc1..021eb57261 100644
--- a/dts/src/arm/am335x-icev2.dts
+++ b/dts/src/arm/am335x-icev2.dts
@@ -287,6 +287,19 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
 };
 
 &spi0 {
diff --git a/dts/src/arm/am33xx-l4.dtsi b/dts/src/arm/am33xx-l4.dtsi
index 3a8a205c27..4e2986f0c6 100644
--- a/dts/src/arm/am33xx-l4.dtsi
+++ b/dts/src/arm/am33xx-l4.dtsi
@@ -225,7 +225,6 @@
 
 		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "adc_tsc";
 			reg = <0xd000 0x4>,
 			      <0xd010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1009,7 +1008,6 @@
 
 		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi0";
 			reg = <0x30000 0x4>,
 			      <0x30110 0x4>,
 			      <0x30114 0x4>;
@@ -1134,7 +1132,6 @@
 
 		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x42000 0x4>,
 			      <0x42010 0x4>,
 			      <0x42014 0x4>;
@@ -1160,7 +1157,6 @@
 
 		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x44000 0x4>,
 			      <0x44010 0x4>,
 			      <0x44014 0x4>;
@@ -1187,7 +1183,6 @@
 
 		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x46000 0x4>,
 			      <0x46010 0x4>,
 			      <0x46014 0x4>;
@@ -1214,7 +1209,6 @@
 
 		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x48000 0x4>,
 			      <0x48010 0x4>,
 			      <0x48014 0x4>;
@@ -1241,7 +1235,6 @@
 
 		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x4a000 0x4>,
 			      <0x4a010 0x4>,
 			      <0x4a014 0x4>;
@@ -1344,7 +1337,6 @@
 
 		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@@ -1412,7 +1404,6 @@
 
 		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xca000 0x4>,
 			      <0xca010 0x4>,
 			      <0xca014 0x4>;
@@ -1533,7 +1524,6 @@
 
 		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi1";
 			reg = <0xa0000 0x4>,
 			      <0xa0110 0x4>,
 			      <0xa0114 0x4>;
@@ -1749,7 +1739,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
 				 <&dcan0_fck>;
@@ -1773,7 +1762,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
 				 <&dcan1_fck>;
@@ -1863,7 +1851,6 @@
 
 		target-module@0 {			/* 0x48300000, ap 66 48.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x0 0x4>,
 			      <0x4 0x4>;
 			reg-names = "rev", "sysc";
@@ -1916,7 +1903,6 @@
 
 		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x2000 0x4>,
 			      <0x2004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1969,7 +1955,6 @@
 
 		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x4000 0x4>,
 			      <0x4004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2022,7 +2007,6 @@
 
 		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "lcdc";
 			reg = <0xe000 0x4>,
 			      <0xe054 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi
index 646f11430d..41dcfb3715 100644
--- a/dts/src/arm/am33xx.dtsi
+++ b/dts/src/arm/am33xx.dtsi
@@ -439,23 +439,87 @@
 			status = "disabled";
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x200>;
+				interrupts = <109>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+			};
+		};
+
+		aes_target: target-module@53500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53500080 0x4>,
+			      <0x53500084 0x4>,
+			      <0x53500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53500000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <103>;
+				dmas = <&edma 6 0>,
+				       <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6 0>,
-			       <&edma 5 0>;
-			dma-names = "tx", "rx";
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
 		};
 	};
 };
diff --git a/dts/src/arm/am3517.dtsi b/dts/src/arm/am3517.dtsi
index 125379ecab..e0b5a00e20 100644
--- a/dts/src/arm/am3517.dtsi
+++ b/dts/src/arm/am3517.dtsi
@@ -74,7 +74,7 @@
 			clock-names = "ick";
 		};
 
-		davinci_mdio: ethernet@5c030000 {
+		davinci_mdio: mdio@5c030000 {
 			compatible = "ti,davinci_mdio";
 			ti,hwmods = "davinci_mdio";
 			status = "disabled";
diff --git a/dts/src/arm/am3703.dtsi b/dts/src/arm/am3703.dtsi
new file mode 100644
index 0000000000..2b994ae790
--- /dev/null
+++ b/dts/src/arm/am3703.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/dts/src/arm/am3715.dtsi b/dts/src/arm/am3715.dtsi
new file mode 100644
index 0000000000..ab328e8c0b
--- /dev/null
+++ b/dts/src/arm/am3715.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi
index ca0aa3f26c..faa14dc0fa 100644
--- a/dts/src/arm/am4372.dtsi
+++ b/dts/src/arm/am4372.dtsi
@@ -256,33 +256,92 @@
 			};
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6 0>,
-				<&edma 5 0>;
-			dma-names = "tx", "rx";
+		aes_target: target-module@53501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53501080 0x4>,
+			      <0x53501084 0x4>,
+			      <0x53501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53501000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 6 0>,
+				      <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34 0>,
-				<&edma 33 0>;
-			dma-names = "tx", "rx";
+		des_target: target-module@53701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53701030 0x4>,
+			      <0x53701034 0x4>,
+			      <0x53701038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x53701000 0x1000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 34 0>,
+				       <&edma 33 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
 		gpmc: gpmc@50000000 {
@@ -305,17 +364,34 @@
 			status = "disabled";
 		};
 
-		qspi: spi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>,
-			      <0x30000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
+		target-module@47900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47900000 0x4>,
+			      <0x47900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
+			#size-cells = <1>;
+			ranges = <0x0 0x47900000 0x1000>,
+				 <0x30000000 0x30000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,am4372-qspi";
+				reg = <0 0x100>,
+				      <0x30000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				clocks = <&dpll_per_m2_div4_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 138 0x4>;
+				num-cs = <4>;
+			};
 		};
 
 		dss: dss@4832a000 {
@@ -369,6 +445,26 @@
 				pool;
 			};
 		};
+
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
+		};
 	};
 };
 
diff --git a/dts/src/arm/am437x-l4.dtsi b/dts/src/arm/am437x-l4.dtsi
index 0dd59ee145..e18e17d312 100644
--- a/dts/src/arm/am437x-l4.dtsi
+++ b/dts/src/arm/am437x-l4.dtsi
@@ -225,7 +225,6 @@
 
 		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "adc_tsc";
 			reg = <0xd000 0x4>,
 			      <0xd010 0x4>;
 			reg-names = "rev", "sysc";
@@ -763,7 +762,6 @@
 
 		target-module@30000 {			/* 0x48030000, ap 65 08.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi0";
 			reg = <0x30000 0x4>,
 			      <0x30110 0x4>,
 			      <0x30114 0x4>;
@@ -900,7 +898,6 @@
 
 		target-module@42000 {			/* 0x48042000, ap 20 24.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x42000 0x4>,
 			      <0x42010 0x4>,
 			      <0x42014 0x4>;
@@ -927,7 +924,6 @@
 
 		target-module@44000 {			/* 0x48044000, ap 22 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x44000 0x4>,
 			      <0x44010 0x4>,
 			      <0x44014 0x4>;
@@ -955,7 +951,6 @@
 
 		target-module@46000 {			/* 0x48046000, ap 24 28.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x46000 0x4>,
 			      <0x46010 0x4>,
 			      <0x46014 0x4>;
@@ -983,7 +978,6 @@
 
 		target-module@48000 {			/* 0x48048000, ap 26 1a.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x48000 0x4>,
 			      <0x48010 0x4>,
 			      <0x48014 0x4>;
@@ -1011,7 +1005,6 @@
 
 		target-module@4a000 {			/* 0x4804a000, ap 71 48.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x4a000 0x4>,
 			      <0x4a010 0x4>,
 			      <0x4a014 0x4>;
@@ -1107,7 +1100,6 @@
 
 		target-module@80000 {			/* 0x48080000, ap 32 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@@ -1169,7 +1161,6 @@
 
 		target-module@ca000 {			/* 0x480ca000, ap 77 38.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xca000 0x4>,
 			      <0xca010 0x4>,
 			      <0xca014 0x4>;
@@ -1282,7 +1273,6 @@
 
 		target-module@a0000 {			/* 0x481a0000, ap 67 2c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi1";
 			reg = <0xa0000 0x4>,
 			      <0xa0110 0x4>,
 			      <0xa0114 0x4>;
@@ -1313,7 +1303,6 @@
 
 		target-module@a2000 {			/* 0x481a2000, ap 69 2e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi2";
 			reg = <0xa2000 0x4>,
 			      <0xa2110 0x4>,
 			      <0xa2114 0x4>;
@@ -1344,7 +1333,6 @@
 
 		target-module@a4000 {			/* 0x481a4000, ap 92 62.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi3";
 			reg = <0xa4000 0x4>,
 			      <0xa4110 0x4>,
 			      <0xa4114 0x4>;
@@ -1527,7 +1515,6 @@
 
 		target-module@c1000 {			/* 0x481c1000, ap 94 68.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0xc1000 0x4>,
 			      <0xc1010 0x4>,
 			      <0xc1014 0x4>;
@@ -1556,7 +1543,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
 			clock-names = "fck";
@@ -1577,7 +1563,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
 			clock-names = "fck";
@@ -1695,7 +1680,6 @@
 
 		target-module@0 {			/* 0x48300000, ap 56 40.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x0 0x4>,
 			      <0x4 0x4>;
 			reg-names = "rev", "sysc";
@@ -1748,7 +1732,6 @@
 
 		target-module@2000 {			/* 0x48302000, ap 58 4a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x2000 0x4>,
 			      <0x2004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1801,7 +1784,6 @@
 
 		target-module@4000 {			/* 0x48304000, ap 60 44.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x4000 0x4>,
 			      <0x4004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1854,7 +1836,6 @@
 
 		target-module@6000 {			/* 0x48306000, ap 96 58.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss3";
 			reg = <0x6000 0x4>,
 			      <0x6004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1896,7 +1877,6 @@
 
 		target-module@8000 {			/* 0x48308000, ap 98 54.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss4";
 			reg = <0x8000 0x4>,
 			      <0x8004 0x4>;
 			reg-names = "rev", "sysc";
@@ -1938,7 +1918,6 @@
 
 		target-module@a000 {			/* 0x4830a000, ap 100 60.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss5";
 			reg = <0xa000 0x4>,
 			      <0xa004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2086,7 +2065,6 @@
 
 		target-module@26000 {			/* 0x48326000, ap 86 66.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "vpfe0";
 			reg = <0x26000 0x4>,
 			      <0x26104 0x4>;
 			reg-names = "rev", "sysc";
@@ -2113,7 +2091,6 @@
 
 		target-module@28000 {			/* 0x48328000, ap 75 0e.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "vpfe1";
 			reg = <0x28000 0x4>,
 			      <0x28104 0x4>;
 			reg-names = "rev", "sysc";
@@ -2162,7 +2139,6 @@
 
 		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3d000 0x4>,
 			      <0x3d010 0x4>,
 			      <0x3d014 0x4>;
@@ -2189,7 +2165,6 @@
 
 		target-module@3f000 {			/* 0x4833f000, ap 104 5c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x3f000 0x4>,
 			      <0x3f010 0x4>,
 			      <0x3f014 0x4>;
@@ -2216,7 +2191,6 @@
 
 		target-module@41000 {			/* 0x48341000, ap 106 76.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x41000 0x4>,
 			      <0x41010 0x4>,
 			      <0x41014 0x4>;
@@ -2243,7 +2217,6 @@
 
 		target-module@45000 {			/* 0x48345000, ap 108 6a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi4";
 			reg = <0x45000 0x4>,
 			      <0x45110 0x4>,
 			      <0x45114 0x4>;
@@ -2358,7 +2331,6 @@
 
 		target-module@a8000 {			/* 0x483a8000, ap 125 6c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ocp2scp0";
 			reg = <0xa8000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
@@ -2440,7 +2412,6 @@
 
 		target-module@e8000 {			/* 0x483e8000, ap 129 78.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0xe8000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts
index 74eaa6a3b2..25222497f8 100644
--- a/dts/src/arm/am437x-sk-evm.dts
+++ b/dts/src/arm/am437x-sk-evm.dts
@@ -272,6 +272,12 @@
 		>;
 	};
 
+	clkout1_pin: pinmux_clkout1_pin {
+		pinctrl-single,pins = <
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
+		>;
+	};
+
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
@@ -593,6 +599,25 @@
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout1_pin>;
+
+		clocks = <&clkout1_mux_ck>;
+		clock-names = "xvclk";
+		assigned-clocks = <&clkout1_mux_ck>;
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
 	edt-ft5306@38 {
 		status = "okay";
 		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
@@ -877,7 +902,7 @@
 	/* Camera port */
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts
index 078cb473fa..27259fd6f7 100644
--- a/dts/src/arm/am43x-epos-evm.dts
+++ b/dts/src/arm/am43x-epos-evm.dts
@@ -145,6 +145,12 @@
 			system-clock-frequency = <12000000>;
 		};
 	};
+
+	audio_mstrclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
 };
 
 &am43xx_pinmux {
@@ -696,6 +702,21 @@
 		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
 		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&audio_mstrclk>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -848,6 +869,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi0_pins_default>;
 	pinctrl-1 = <&spi0_pins_sleep>;
+	ti,pindir-d0-out-d1-in = <1>;
 };
 
 &spi1 {
@@ -855,6 +877,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi1_pins_default>;
 	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in = <1>;
 };
 
 &usb2_phy1 {
@@ -962,7 +985,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
diff --git a/dts/src/arm/am43xx-clocks.dtsi b/dts/src/arm/am43xx-clocks.dtsi
index 091356f2a8..c726cd8dbd 100644
--- a/dts/src/arm/am43xx-clocks.dtsi
+++ b/dts/src/arm/am43xx-clocks.dtsi
@@ -704,6 +704,60 @@
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
+
+	clkout1_osc_div_ck: clkout1-osc-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout1_src2_pre_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
+	};
+
+	clkout1_ck: clkout1-ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
 };
 
 &prcm {
diff --git a/dts/src/arm/am571x-idk.dts b/dts/src/arm/am571x-idk.dts
index 820ce3b60b..669559c9c9 100644
--- a/dts/src/arm/am571x-idk.dts
+++ b/dts/src/arm/am571x-idk.dts
@@ -167,11 +167,7 @@
 
 &pcie1_rc {
 	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 };
 
 &mmc1 {
diff --git a/dts/src/arm/am572x-idk-common.dtsi b/dts/src/arm/am572x-idk-common.dtsi
index a064f13b38..ddf123620e 100644
--- a/dts/src/arm/am572x-idk-common.dtsi
+++ b/dts/src/arm/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/dts/src/arm/am57xx-beagle-x15-common.dtsi b/dts/src/arm/am57xx-beagle-x15-common.dtsi
index bc76f1705c..a813a0cf3f 100644
--- a/dts/src/arm/am57xx-beagle-x15-common.dtsi
+++ b/dts/src/arm/am57xx-beagle-x15-common.dtsi
@@ -29,6 +29,27 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	main_12v0: fixedregulator-main_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "main_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of TPS54531D */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_3v3: fixedregulator-vdd_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
@@ -547,10 +568,6 @@
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
 &mcasp3 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi
index 398721c720..aa5e55f981 100644
--- a/dts/src/arm/am57xx-idk-common.dtsi
+++ b/dts/src/arm/am57xx-idk-common.dtsi
@@ -9,6 +9,7 @@
 	aliases {
 		rtc0 = &tps659038_rtc;
 		rtc1 = &rtc;
+		display0 = &hdmi0;
 	};
 
 	chosen {
@@ -96,6 +97,48 @@
 			default-state = "off";
 		};
 	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+		gpios = <0>, /* optional CT_CP_HPD */
+			<0>, /* optional LS_OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -485,3 +528,19 @@
 &cpu0 {
 	vdd-supply = <&smps12_reg>;
 };
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
diff --git a/dts/src/arm/armada-385-clearfog-gtr-l8.dts b/dts/src/arm/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 0000000000..c9ac630e58
--- /dev/null
+++ b/dts/src/arm/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan6";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "lan3";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "lan1";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@10 {
+				reg = <10>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: switch0phy1@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: switch0phy2@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: switch0phy3@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: switch0phy4@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: switch0phy5@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: switch0phy6@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: switch0phy7@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/dts/src/arm/armada-385-clearfog-gtr-s4.dts b/dts/src/arm/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 0000000000..fa653b3794
--- /dev/null
+++ b/dts/src/arm/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/dts/src/arm/armada-385-clearfog-gtr.dtsi b/dts/src/arm/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 0000000000..624bbcae68
--- /dev/null
+++ b/dts/src/arm/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp0: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button_1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: nct75@4c {
+		compatible = "lm75";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: nct75@4d {
+		compatible = "lm75";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-names = "default";
+
+	wifi-disable {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-names = "default";
+
+	lte-disable {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
diff --git a/dts/src/arm/armada-388-clearfog.dtsi b/dts/src/arm/armada-388-clearfog.dtsi
index 0d81600ca2..a0aa1d188f 100644
--- a/dts/src/arm/armada-388-clearfog.dtsi
+++ b/dts/src/arm/armada-388-clearfog.dtsi
@@ -111,11 +111,6 @@
 };
 
 &i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
 	/*
 	 * PCA9655 GPIO expander, up to 1MHz clock.
 	 *  0-CON3 CLKREQ#
@@ -183,6 +178,12 @@
 		compatible = "microchip,mcp3021";
 		reg = <0x4c>;
 	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
 };
 
 &i2c1 {
diff --git a/dts/src/arm/armada-388-helios4.dts b/dts/src/arm/armada-388-helios4.dts
index 705adfa8c6..fb49df2a3b 100644
--- a/dts/src/arm/armada-388-helios4.dts
+++ b/dts/src/arm/armada-388-helios4.dts
@@ -140,11 +140,6 @@
 	soc {
 		internal-regs {
 			i2c@11000 {
-				clock-frequency = <400000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
 				/*
 				 * PCA9655 GPIO expander, up to 1MHz clock.
 				 *  0-Board Revision bit 0 #
diff --git a/dts/src/arm/armada-38x-solidrun-microsom.dtsi b/dts/src/arm/armada-38x-solidrun-microsom.dtsi
index 3a7f9c1ac3..363ac42388 100644
--- a/dts/src/arm/armada-38x-solidrun-microsom.dtsi
+++ b/dts/src/arm/armada-38x-solidrun-microsom.dtsi
@@ -71,6 +71,19 @@
 	};
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
 &pinctrl {
 	microsom_phy_clk_pins: microsom-phy-clk-pins {
 		marvell,pins = "mpp45";
diff --git a/dts/src/arm/aspeed-bmc-facebook-wedge100.dts b/dts/src/arm/aspeed-bmc-facebook-wedge100.dts
index b1e10f0c85..322587b7b6 100644
--- a/dts/src/arm/aspeed-bmc-facebook-wedge100.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-wedge100.dts
@@ -76,7 +76,6 @@
 
 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
diff --git a/dts/src/arm/aspeed-bmc-facebook-wedge40.dts b/dts/src/arm/aspeed-bmc-facebook-wedge40.dts
index aaa77a597d..54e508530d 100644
--- a/dts/src/arm/aspeed-bmc-facebook-wedge40.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-wedge40.dts
@@ -75,7 +75,6 @@
 
 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
diff --git a/dts/src/arm/aspeed-bmc-facebook-yamp.dts b/dts/src/arm/aspeed-bmc-facebook-yamp.dts
index 52933598aa..fe2e11c2da 100644
--- a/dts/src/arm/aspeed-bmc-facebook-yamp.dts
+++ b/dts/src/arm/aspeed-bmc-facebook-yamp.dts
@@ -35,7 +35,6 @@
 &mac0 {
 	status = "okay";
 	use-ncsi;
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
diff --git a/dts/src/arm/aspeed-bmc-ibm-rainier.dts b/dts/src/arm/aspeed-bmc-ibm-rainier.dts
index c1c9cd30f9..6232cd726a 100644
--- a/dts/src/arm/aspeed-bmc-ibm-rainier.dts
+++ b/dts/src/arm/aspeed-bmc-ibm-rainier.dts
@@ -97,22 +97,22 @@
 	status = "okay";
 
 	power-supply@68 {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x68>;
 	};
 
 	power-supply@69 {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x69>;
 	};
 
 	power-supply@6a {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x6a>;
 	};
 
 	power-supply@6b {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x6b>;
 	};
 };
@@ -258,9 +258,9 @@
 		};
 	};
 
-	pca0: pca9552@60 {
+	pca0: pca9552@61 {
 		compatible = "nxp,pca9552";
-		reg = <0x60>;
+		reg = <0x61>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -352,18 +352,8 @@
 &i2c8 {
 	status = "okay";
 
-	ucd90320@b {
-		compatible = "ti,ucd90160";
-		reg = <0x0b>;
-	};
-
-	ucd90320@c {
-		compatible = "ti,ucd90160";
-		reg = <0x0c>;
-	};
-
 	ucd90320@11 {
-		compatible = "ti,ucd90160";
+		compatible = "ti,ucd90320";
 		reg = <0x11>;
 	};
 
@@ -521,371 +511,6 @@
 
 &i2c13 {
 	status = "okay";
-};
-
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	power-supply@6a {
-		compatible = "ibm,cffps2";
-		reg = <0x6a>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps2";
-		reg = <0x6b>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	tmp275@4b {
-		compatible = "ti,tmp275";
-		reg = <0x4b>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	si7021-a20@20 {
-		compatible = "silabs,si7020";
-		reg = <0x20>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@b {
-		compatible = "ti,ucd90160";
-		reg = <0x0b>;
-	};
-
-	ucd90320@c {
-		compatible = "ti,ucd90160";
-		reg = <0x0c>;
-	};
-
-	ucd90320@11 {
-		compatible = "ti,ucd90160";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	ir35221@42 {
-		compatible = "infineon,ir35221";
-		reg = <0x42>;
-	};
-
-	ir35221@43 {
-		compatible = "infineon,ir35221";
-		reg = <0x43>;
-	};
-
-	ir35221@44 {
-		compatible = "infineon,ir35221";
-		reg = <0x44>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	ir35221@73 {
-		compatible = "infineon,ir35221";
-		reg = <0x73>;
-	};
-
-	ir35221@74 {
-		compatible = "infineon,ir35221";
-		reg = <0x74>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	ir35221@42 {
-		compatible = "infineon,ir35221";
-		reg = <0x42>;
-	};
-
-	ir35221@43 {
-		compatible = "infineon,ir35221";
-		reg = <0x43>;
-	};
-
-	ir35221@44 {
-		compatible = "infineon,ir35221";
-		reg = <0x44>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	ir35221@73 {
-		compatible = "infineon,ir35221";
-		reg = <0x73>;
-	};
-
-	ir35221@74 {
-		compatible = "infineon,ir35221";
-		reg = <0x74>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
 
 	eeprom@50 {
 		compatible = "atmel,24c64";
diff --git a/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts
index c17bb7fce7..62a3ab4c18 100644
--- a/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts
+++ b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts
@@ -94,8 +94,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
 		fan0-presence {
diff --git a/dts/src/arm/aspeed-bmc-opp-swift.dts b/dts/src/arm/aspeed-bmc-opp-swift.dts
index b8fdd2a8a2..d56b5ed09b 100644
--- a/dts/src/arm/aspeed-bmc-opp-swift.dts
+++ b/dts/src/arm/aspeed-bmc-opp-swift.dts
@@ -82,8 +82,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
 		scm0-presence {
diff --git a/dts/src/arm/aspeed-bmc-opp-tacoma.dts b/dts/src/arm/aspeed-bmc-opp-tacoma.dts
index f02de4ab05..ff49ec76fa 100644
--- a/dts/src/arm/aspeed-bmc-opp-tacoma.dts
+++ b/dts/src/arm/aspeed-bmc-opp-tacoma.dts
@@ -122,37 +122,6 @@
 	};
 };
 
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
 &mac2 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -165,6 +134,11 @@
 
 &emmc {
 	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+
 	#address-cells = <2>;
 	#size-cells = <0>;
 
@@ -820,373 +794,6 @@
 	status = "okay";
 };
 
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	bmp: bmp280@77 {
-		compatible = "bosch,bmp280";
-		reg = <0x77>;
-		#io-channel-cells = <1>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps1";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps1";
-		reg = <0x69>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
 &pinctrl {
 	/* Hog these as no driver is probed for the entire LPC block */
 	pinctrl-names = "default";
diff --git a/dts/src/arm/aspeed-bmc-opp-vesnin.dts b/dts/src/arm/aspeed-bmc-opp-vesnin.dts
index affd2c8743..01074b6e3e 100644
--- a/dts/src/arm/aspeed-bmc-opp-vesnin.dts
+++ b/dts/src/arm/aspeed-bmc-opp-vesnin.dts
@@ -14,7 +14,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x20000000>;
 	};
 
@@ -107,10 +107,7 @@
 
 &mac0 {
 	status = "okay";
-
 	use-ncsi;
-	no-hw-checksum;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 };
@@ -236,3 +233,16 @@
 &wdt2 {
 	aspeed,alt-boot;
 };
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts
index 569dad93e1..421aa60014 100644
--- a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts
+++ b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts
@@ -77,8 +77,6 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
 		fan0-presence {
diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi
index 46c0891aac..807a0fc206 100644
--- a/dts/src/arm/aspeed-g4.dtsi
+++ b/dts/src/arm/aspeed-g4.dtsi
@@ -179,18 +179,21 @@
 				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2400-pinctrl";
-				};
-
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
 					compatible = "aspeed,ast2400-p2a-ctrl";
 					status = "disabled";
 				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -346,14 +349,14 @@
 
 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x80>;
+						reg = <0x0 0x10>;
 						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
-					lpc_snoop: lpc-snoop@0 {
+					lpc_snoop: lpc-snoop@10 {
 						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x0 0x80>;
+						reg = <0x10 0x8>;
 						interrupts = <8>;
 						status = "disabled";
 					};
diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi
index a259c63fff..ebec0fa8ba 100644
--- a/dts/src/arm/aspeed-g5.dtsi
+++ b/dts/src/arm/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
 		reg = <0x80000000 0>;
 	};
 
-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-		status = "disabled";
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -213,24 +206,33 @@
 			#size-cells = <1>;
 			ranges;
 
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2500-pinctrl";
-					aspeed,external-nodes = <&gfx &lhc>;
-
-				};
-
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
 					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
 					status = "disabled";
 				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -460,29 +462,30 @@
 
 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x80>;
+						reg = <0x0 0x10>;
 						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
-					lpc_snoop: lpc-snoop@0 {
+					lpc_snoop: lpc-snoop@10 {
 						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x0 0x80>;
+						reg = <0x10 0x8>;
 						interrupts = <8>;
 						status = "disabled";
 					};
 
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
 					lpc_reset: reset-controller@18 {
 						compatible = "aspeed,ast2500-lpc-reset";
 						reg = <0x18 0x4>;
 						#reset-cells = <1>;
 					};
 
+					lhc: lhc@20 {
+						compatible = "aspeed,ast2500-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+
 					ibt: ibt@c0 {
 						compatible = "aspeed,ast2500-ibt-bmc";
 						reg = <0xc0 0x18>;
diff --git a/dts/src/arm/aspeed-g6.dtsi b/dts/src/arm/aspeed-g6.dtsi
index 5f6142d99e..796976d275 100644
--- a/dts/src/arm/aspeed-g6.dtsi
+++ b/dts/src/arm/aspeed-g6.dtsi
@@ -163,26 +163,6 @@
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
-
-			fsim0: fsi@1e79b000 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-				reg = <0x1e79b000 0x94>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fsi1_default>;
-				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-				status = "disabled";
-			};
-
-			fsim1: fsi@1e79b100 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-				reg = <0x1e79b100 0x94>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fsi2_default>;
-				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-				status = "disabled";
-			};
 		};
 
 		mdio0: mdio@1e650000 {
@@ -385,7 +365,7 @@
 				status = "disabled";
 			};
 
-			wdt4: watchdog@1e7850C0 {
+			wdt4: watchdog@1e7850c0 {
 				compatible = "aspeed,ast2600-wdt";
 				reg = <0x1e7850C0 0x40>;
 				status = "disabled";
@@ -595,6 +575,25 @@
 				ranges = <0 0x1e78a000 0x1000>;
 			};
 
+			fsim0: fsi@1e79b000 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/dts/src/arm/ast2500-facebook-netbmc-common.dtsi b/dts/src/arm/ast2500-facebook-netbmc-common.dtsi
index 7a395ba565..7468f102bd 100644
--- a/dts/src/arm/ast2500-facebook-netbmc-common.dtsi
+++ b/dts/src/arm/ast2500-facebook-netbmc-common.dtsi
@@ -71,7 +71,6 @@
 
 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
diff --git a/dts/src/arm/at91-kizbox.dts b/dts/src/arm/at91-kizbox.dts
index 90996eaf73..7d938ccf71 100644
--- a/dts/src/arm/at91-kizbox.dts
+++ b/dts/src/arm/at91-kizbox.dts
@@ -28,85 +28,6 @@
 		};
 	};
 
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -127,15 +48,6 @@
 		};
 	};
 
-	i2c-gpio-0 {
-		status = "okay";
-
-		rtc: pcf8563@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
 	pwm_leds {
 		compatible = "pwm-leds";
 
@@ -179,3 +91,87 @@
 			     &pinctrl_tcb1_tiob0>;
 	};
 };
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
diff --git a/dts/src/arm/at91-kizboxmini-base.dts b/dts/src/arm/at91-kizboxmini-base.dts
new file mode 100644
index 0000000000..81c29ca5cc
--- /dev/null
+++ b/dts/src/arm/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/dts/src/arm/at91-kizboxmini.dts b/dts/src/arm/at91-kizboxmini-common.dtsi
index cb22f5fb05..fddf267b2d 100644
--- a/dts/src/arm/at91-kizboxmini.dts
+++ b/dts/src/arm/at91-kizboxmini-common.dtsi
@@ -1,17 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0
 /*
  * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
  *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
  */
-/dts-v1/;
 #include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
 
 / {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
 	chosen {
 		bootargs = "ubi.mtd=ubi";
 		stdout-path = &dbgu;
@@ -22,24 +21,16 @@
 	};
 
 	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
 		main_xtal {
 			clock-frequency = <12000000>;
 		};
-	};
 
-	ahb {
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
 		};
 	};
 
@@ -63,17 +54,25 @@
 		};
 	};
 
-	pwm_leds {
+	leds: pwm_leds {
 		compatible = "pwm-leds";
 
-		green {
+		led_blue: pwm_blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: pwm_green {
 			label = "pwm:green:user";
 			pwms = <&pwm0 0 10000000 0>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
-		red {
+		led_red: pwm_red {
 			label = "pwm:red:user";
 			pwms = <&pwm0 1 10000000 0>;
 			max-brightness = <255>;
@@ -82,53 +81,12 @@
 	};
 };
 
-&dbgu {
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };
 
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-		     &pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand-controller {
-		pinctrl-0 = <&pinctrl_nand_oe_we
-			     &pinctrl_nand_cs
-			     &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				bootstrap@0 {
-					label = "bootstrap";
-					reg = <0x0 0x20000>;
-				};
-
-				ubi@20000 {
-					label = "ubi";
-					reg = <0x20000 0x7fe0000>;
-				};
-			};
-		};
-	};
-};
-
 &macb0 {
 	phy-mode = "rmii";
 	status = "okay";
@@ -137,26 +95,70 @@
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1>;
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
 	status = "okay";
 };
 
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
+&dbgu {
+	status = "okay";
+};
 
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
+&watchdog {
+	status = "okay";
 };
 
-&usart0 {
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
 &usb0 {
 	num-ports = <1>;
 	status = "okay";
@@ -166,6 +168,3 @@
 	status = "okay";
 };
 
-&watchdog {
-	status = "okay";
-};
diff --git a/dts/src/arm/at91-kizboxmini-mb.dts b/dts/src/arm/at91-kizboxmini-mb.dts
new file mode 100644
index 0000000000..c07d3076a9
--- /dev/null
+++ b/dts/src/arm/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/dts/src/arm/at91-kizboxmini-rd.dts b/dts/src/arm/at91-kizboxmini-rd.dts
new file mode 100644
index 0000000000..ab50f4d223
--- /dev/null
+++ b/dts/src/arm/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/dts/src/arm/at91-nattis-2-natte-2.dts b/dts/src/arm/at91-nattis-2-natte-2.dts
index f245944bd5..4f123477e6 100644
--- a/dts/src/arm/at91-nattis-2-natte-2.dts
+++ b/dts/src/arm/at91-nattis-2-natte-2.dts
@@ -8,7 +8,6 @@
  */
 /dts-v1/;
 #include "at91-linea.dtsi"
-#include "sama5d3_lcd.dtsi"
 #include "at91-natte.dtsi"
 
 / {
diff --git a/dts/src/arm/at91-sam9x60ek.dts b/dts/src/arm/at91-sam9x60ek.dts
new file mode 100644
index 0000000000..9f30132d7d
--- /dev/null
+++ b/dts/src/arm/at91-sam9x60ek.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators: regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_1v8: fixed-regulator-vdd_1v8@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd_1v5: fixed-regulator-vdd_1v5@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD1_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD2_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code=<0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c32";
+			reg = <0x53>;
+			pagesize = <16>;
+			size = <128>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi0: spi@400 {
+		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+		clock-names = "spi_clk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		atmel,fifo-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart1: serial@200 {
+		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(10))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+			 /*	A	B	C	*/
+			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
+			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
+			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
+			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
+			 >;
+
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/dts/src/arm/at91-sama5d27_som1.dtsi b/dts/src/arm/at91-sama5d27_som1.dtsi
index 7788d5db65..6281590150 100644
--- a/dts/src/arm/at91-sama5d27_som1.dtsi
+++ b/dts/src/arm/at91-sama5d27_som1.dtsi
@@ -24,6 +24,10 @@
 	};
 
 	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
 		apb {
 			qspi1: spi@f0024000 {
 				pinctrl-names = "default";
diff --git a/dts/src/arm/at91-sama5d27_som1_ek.dts b/dts/src/arm/at91-sama5d27_som1_ek.dts
index fca5716ce4..b0853bf790 100644
--- a/dts/src/arm/at91-sama5d27_som1_ek.dts
+++ b/dts/src/arm/at91-sama5d27_som1_ek.dts
@@ -131,6 +131,9 @@
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
 					dma-names = "tx", "rx";
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
@@ -246,6 +249,9 @@
 
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				status = "okay";
diff --git a/dts/src/arm/at91-sama5d27_wlsom1.dtsi b/dts/src/arm/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 0000000000..db3e2239ee
--- /dev/null
+++ b/dts/src/arm/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(13))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(14))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+};
+
diff --git a/dts/src/arm/at91-sama5d27_wlsom1_ek.dts b/dts/src/arm/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 0000000000..0b9fa2942d
--- /dev/null
+++ b/dts/src/arm/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(12))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: spi_flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/dts/src/arm/at91-smartkiz.dts b/dts/src/arm/at91-smartkiz.dts
new file mode 100644
index 0000000000..106f23ba4a
--- /dev/null
+++ b/dts/src/arm/at91-smartkiz.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&leds {
+	blue {
+		status = "okay";
+	};
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi
index dee9c0c8a0..6afbb48e7f 100644
--- a/dts/src/arm/at91sam9260.dtsi
+++ b/dts/src/arm/at91sam9260.dtsi
@@ -187,7 +187,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -221,7 +221,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -239,7 +239,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -257,7 +257,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -275,7 +275,7 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -283,7 +283,7 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -738,7 +738,7 @@
 				status = "disabled";
 			};
 
-			watchdog@fffffd40 {
+			watchdog: watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -793,7 +793,7 @@
 		};
 	};
 
-	i2c-gpio-0 {
+	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/dts/src/arm/at91sam9261.dtsi b/dts/src/arm/at91sam9261.dtsi
index dba025a985..5ed3d745ac 100644
--- a/dts/src/arm/at91sam9261.dtsi
+++ b/dts/src/arm/at91sam9261.dtsi
@@ -329,7 +329,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -347,7 +347,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -365,7 +365,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/dts/src/arm/at91sam9263.dtsi b/dts/src/arm/at91sam9263.dtsi
index 99678abdda..5c990cfae2 100644
--- a/dts/src/arm/at91sam9263.dtsi
+++ b/dts/src/arm/at91sam9263.dtsi
@@ -183,7 +183,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -201,7 +201,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -219,7 +219,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi
index 691c95ea61..fd179097a4 100644
--- a/dts/src/arm/at91sam9g45.dtsi
+++ b/dts/src/arm/at91sam9g45.dtsi
@@ -556,7 +556,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -574,7 +574,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -592,7 +592,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -610,7 +610,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi
index 8643b71515..ea024e4b6e 100644
--- a/dts/src/arm/at91sam9rl.dtsi
+++ b/dts/src/arm/at91sam9rl.dtsi
@@ -682,7 +682,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -721,7 +721,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -744,7 +744,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -767,7 +767,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
diff --git a/dts/src/arm/bcm2711.dtsi b/dts/src/arm/bcm2711.dtsi
index e2f6ffb00a..d1e684d0ac 100644
--- a/dts/src/arm/bcm2711.dtsi
+++ b/dts/src/arm/bcm2711.dtsi
@@ -12,26 +12,6 @@
 
 	interrupt-parent = <&gicv2>;
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
-		 * that's not good enough for the BCM2711 as some devices can
-		 * only address the lower 1G of memory (ZONE_DMA).
-		 */
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x2000000>; /* 32MB */
-			alloc-ranges = <0x0 0x00000000 0x40000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-
 	soc {
 		/*
 		 * Defined ranges:
@@ -66,6 +46,17 @@
 						 IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		avs_monitor: avs-monitor@7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
 		dma: dma@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xb00>;
@@ -112,10 +103,8 @@
 		};
 
 		rng@7e104000 {
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
-			/* RNG is incompatible with brcm,bcm2835-rng */
-			status = "disabled";
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
 		};
 
 		uart2: serial@7e201400 {
@@ -331,7 +320,36 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 
-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
 
 		genet: ethernet@7d580000 {
 			compatible = "brcm,bcm2711-genet-v5";
@@ -363,6 +381,7 @@
 
 &cpu_thermal {
 	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
 };
 
 &dsi0 {
@@ -828,6 +847,19 @@
 	};
 };
 
+&rmem {
+	#address-cells = <2>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
 &i2c0 {
 	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
 	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/bcm2835-common.dtsi b/dts/src/arm/bcm2835-common.dtsi
index fe1ab40c7f..2b1d9d4c0c 100644
--- a/dts/src/arm/bcm2835-common.dtsi
+++ b/dts/src/arm/bcm2835-common.dtsi
@@ -70,6 +70,12 @@
 			system-power-controller;
 		};
 
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
 		pixelvalve@7e206000 {
 			compatible = "brcm,bcm2835-pixelvalve0";
 			reg = <0x7e206000 0x100>;
diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi
index 839491628e..e1abe8c730 100644
--- a/dts/src/arm/bcm283x.dtsi
+++ b/dts/src/arm/bcm283x.dtsi
@@ -30,6 +30,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
@@ -84,12 +97,6 @@
 				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
 		};
 
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-			interrupts = <2 29>;
-		};
-
 		mailbox: mailbox@7e00b880 {
 			compatible = "brcm,bcm2835-mbox";
 			reg = <0x7e00b880 0x40>;
diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts
index a2c9de35dd..536fb24f38 100644
--- a/dts/src/arm/bcm958625hr.dts
+++ b/dts/src/arm/bcm958625hr.dts
@@ -55,18 +55,9 @@
 		priority = <200>;
 	};
 
-	/* Hardware I2C block cannot do more than 63 bytes per transfer,
-	 * which would prevent reading from a SFP's EEPROM (256 byte).
-	 */
-	i2c1: i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	};
-
 	sfp: sfp {
 		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
+		i2c-bus = <&i2c0>;
 		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
 		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
@@ -74,6 +65,10 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/dts/src/arm/dm3725.dtsi b/dts/src/arm/dm3725.dtsi
new file mode 100644
index 0000000000..d24e906a14
--- /dev/null
+++ b/dts/src/arm/dm3725.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/dts/src/arm/dra7-evm-common.dtsi b/dts/src/arm/dra7-evm-common.dtsi
index 82eeba8fae..23244b5a99 100644
--- a/dts/src/arm/dra7-evm-common.dtsi
+++ b/dts/src/arm/dra7-evm-common.dtsi
@@ -4,7 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
 #include <dt-bindings/input/input.h>
 
 / {
diff --git a/dts/src/arm/dra7-l4.dtsi b/dts/src/arm/dra7-l4.dtsi
index 7e7aa101d8..fc41883489 100644
--- a/dts/src/arm/dra7-l4.dtsi
+++ b/dts/src/arm/dra7-l4.dtsi
@@ -186,7 +186,6 @@
 
 		target-module@56000 {			/* 0x4a056000, ap 9 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@@ -212,7 +211,7 @@
 			ranges = <0x0 0x56000 0x1000>;
 
 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@@ -234,7 +233,6 @@
 
 		target-module@80000 {			/* 0x4a080000, ap 13 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@@ -302,7 +300,6 @@
 
 		target-module@90000 {			/* 0x4a090000, ap 59 42.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp3";
 			reg = <0x90000 0x4>,
 			      <0x90010 0x4>,
 			      <0x90014 0x4>;
@@ -394,7 +391,6 @@
 
 		target-module@d9000 {			/* 0x4a0d9000, ap 17 72.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu";
 			reg = <0xd9038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -414,7 +410,6 @@
 
 		target-module@dd000 {			/* 0x4a0dd000, ap 19 18.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
 			reg = <0xdd038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -471,7 +466,6 @@
 
 		target-module@f6000 {			/* 0x4a0f6000, ap 25 78.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xf6000 0x4>,
 			      <0xf6010 0x4>,
 			      <0xf6014 0x4>;
@@ -1233,7 +1227,6 @@
 
 		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1748,7 +1741,6 @@
 
 		target-module@78000 {			/* 0x48078000, ap 39 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x78000 0x4>,
 			      <0x78010 0x4>,
 			      <0x78014 0x4>;
@@ -1842,7 +1834,6 @@
 
 		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1870,7 +1861,6 @@
 
 		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2044,6 +2034,37 @@
 				 <0x00001000 0x000a5000 0x00001000>;
 		};
 
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
@@ -2490,7 +2511,6 @@
 
 		target-module@3e000 {			/* 0x4843e000, ap 25 30.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x3e000 0x4>,
 			      <0x3e004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2537,7 +2557,6 @@
 
 		target-module@40000 {			/* 0x48440000, ap 27 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x40000 0x4>,
 			      <0x40004 0x4>;
 			reg-names = "rev", "sysc";
@@ -2584,7 +2603,6 @@
 
 		target-module@42000 {			/* 0x48442000, ap 29 20.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x42000 0x4>,
 			      <0x42004 0x4>;
 			reg-names = "rev", "sysc";
@@ -3326,7 +3344,6 @@
 
 		target-module@20000 {			/* 0x48820000, ap 5 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x20000 0x4>,
 			      <0x20010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3354,7 +3371,6 @@
 
 		target-module@22000 {			/* 0x48822000, ap 7 24.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3382,7 +3398,6 @@
 
 		target-module@24000 {			/* 0x48824000, ap 9 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x24000 0x4>,
 			      <0x24010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3410,7 +3425,6 @@
 
 		target-module@26000 {			/* 0x48826000, ap 11 0c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x26000 0x4>,
 			      <0x26010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3438,7 +3452,6 @@
 
 		target-module@28000 {			/* 0x48828000, ap 13 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer13";
 			reg = <0x28000 0x4>,
 			      <0x28010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3466,7 +3479,6 @@
 
 		target-module@2a000 {			/* 0x4882a000, ap 15 10.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer14";
 			reg = <0x2a000 0x4>,
 			      <0x2a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3494,7 +3506,6 @@
 
 		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer15";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -3522,7 +3533,6 @@
 
 		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer16";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -4166,35 +4176,88 @@
 		};
 
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x170010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x170000 0x10000>;
+			status = "disabled";
 		};
 
 		target-module@190000 {			/* 0x48990000, ap 23 2e.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x190010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x190000 0x10000>;
+			status = "disabled";
 		};
 
 		target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1b0000 0x4>,
+			      <0x1b0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x1b0000 0x10000>;
+			status = "disabled";
 		};
 
-		target-module@1d0000 {			/* 0x489d0000, ap 27 30.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1d0010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x1d0000 0x10000>;
+
+			vpe: vpe@0 {
+				compatible = "ti,dra7-vpe";
+				reg = <0x0000 0x120>,
+				      <0x0700 0x80>,
+				      <0x5700 0x18>,
+				      <0xd000 0x400>;
+				reg-names = "vpe_top",
+					    "sc",
+					    "csc",
+					    "vpdma";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 	};
 };
@@ -4422,7 +4485,6 @@
 
 		target-module@0 {			/* 0x4ae20000, ap 19 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer12";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi
index 73e5011f53..d78b684e7f 100644
--- a/dts/src/arm/dra7.dtsi
+++ b/dts/src/arm/dra7.dtsi
@@ -377,44 +377,120 @@
 			ti,hwmods = "dmm";
 		};
 
-		mmu0_dsp1: mmu@40d01000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d01000 0x100>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
-			status = "disabled";
+		target-module@40d01000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d01000 0x4>,
+			      <0x40d01010 0x4>,
+			      <0x40d01014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d01000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			};
 		};
 
-		mmu1_dsp1: mmu@40d02000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d02000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
-			status = "disabled";
+		target-module@40d02000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d02000 0x4>,
+			      <0x40d02010 0x4>,
+			      <0x40d02014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d02000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			};
 		};
 
-		mmu_ipu1: mmu@58882000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x58882000 0x100>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu1";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
+		target-module@58882000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58882000 0x4>,
+			      <0x58882010 0x4>,
+			      <0x58882014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_ipu 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58882000 0x100>;
+
+			mmu_ipu1: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
-		mmu_ipu2: mmu@55082000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu2";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55082000 0x100>;
+
+			mmu_ipu2: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
 		abb_mpu: regulator-abb-mpu {
@@ -597,6 +673,24 @@
 			status = "disabled";
 		};
 
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x2000000>;
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
@@ -652,48 +746,96 @@
 			};
 		};
 
-		aes1: aes@4b500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b500000 0xa0>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		aes2: aes@4b700000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b700000 0xa0>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		aes1_target: target-module@4b500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b500080 0x4>,
+			      <0x4b500084 0x4>,
+			      <0x4b500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b500000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		aes2_target: target-module@4b700000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b700080 0x4>,
+			      <0x4b700084 0x4>,
+			      <0x4b700088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b700000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b101000 0x300>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 119 0>;
-			dma-names = "rx";
-			clocks = <&l3_iclk_div>;
+		sham_target: target-module@4b101000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b101100 0x4>,
+			      <0x4b101110 0x4>,
+			      <0x4b101114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b101000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 119 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
 		opp_supply_mpu: opp-supply@4a003b20 {
diff --git a/dts/src/arm/dra72-evm-common.dtsi b/dts/src/arm/dra72-evm-common.dtsi
index 8641a3d7d8..01558a86af 100644
--- a/dts/src/arm/dra72-evm-common.dtsi
+++ b/dts/src/arm/dra72-evm-common.dtsi
@@ -6,7 +6,7 @@
 
 #include "dra72x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
 
 / {
 	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
@@ -187,6 +187,12 @@
 		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -269,6 +275,23 @@
 			line-name = "vin6_sel_s0";
 		};
 	};
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &uart1 {
@@ -580,3 +603,11 @@
 &pcie1_rc {
 	status = "okay";
 };
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/dts/src/arm/dra72x.dtsi b/dts/src/arm/dra72x.dtsi
index f5762709c8..82b57a35ab 100644
--- a/dts/src/arm/dra72x.dtsi
+++ b/dts/src/arm/dra72x.dtsi
@@ -17,6 +17,48 @@
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
 	reg = <0x58000000 0x80>,
 	      <0x58004054 0x4>,
diff --git a/dts/src/arm/dra74x.dtsi b/dts/src/arm/dra74x.dtsi
index d1b5b76bc5..c5abc436ca 100644
--- a/dts/src/arm/dra74x.dtsi
+++ b/dts/src/arm/dra74x.dtsi
@@ -66,24 +66,63 @@
 			};
 		};
 
-		mmu0_dsp2: mmu@41501000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41501000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
-			status = "disabled";
+		target-module@41501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41501000 0x4>,
+			      <0x41501010 0x4>,
+			      <0x41501014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41501000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			};
 		};
 
-		mmu1_dsp2: mmu@41502000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41502000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
-			status = "disabled";
+		target-module@41502000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41502000 0x4>,
+			      <0x41502010 0x4>,
+			      <0x41502014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41502000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			};
 		};
 	};
 };
diff --git a/dts/src/arm/dra76-evm.dts b/dts/src/arm/dra76-evm.dts
index 1fb6f13fb5..e958cb3d1b 100644
--- a/dts/src/arm/dra76-evm.dts
+++ b/dts/src/arm/dra76-evm.dts
@@ -13,6 +13,13 @@
 	model = "TI DRA762 EVM";
 	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
 
+	aliases {
+		display0 = &hdmi0;
+
+		sound0 = &sound0;
+		sound1 = &hdmi;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
@@ -116,6 +123,54 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
+			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -317,6 +372,27 @@
 	};
 };
 
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -411,6 +487,23 @@
 	phy-supply = <&ldo3_reg>;
 };
 
+&dss {
+	status = "ok";
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "ok";
+
+	vdda-supply = <&ldo1_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
 &qspi {
 	spi-max-frequency = <96000000>;
 	m25p80@0 {
@@ -447,3 +540,11 @@
 		max-bitrate = <5000000>;
 	};
 };
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/dts/src/arm/dra76x.dtsi b/dts/src/arm/dra76x.dtsi
index cdcba3f561..2f7539afef 100644
--- a/dts/src/arm/dra76x.dtsi
+++ b/dts/src/arm/dra76x.dtsi
@@ -41,6 +41,48 @@
 
 };
 
+&l4_per3 {
+	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
 	ti,irqs-skip = <10 67 68 133 139 140>;
diff --git a/dts/src/arm/dra7xx-clocks.dtsi b/dts/src/arm/dra7xx-clocks.dtsi
index 93e1eb83be..55cef4cac5 100644
--- a/dts/src/arm/dra7xx-clocks.dtsi
+++ b/dts/src/arm/dra7xx-clocks.dtsi
@@ -1591,10 +1591,10 @@
 
 	rtc_cm: rtc-cm@700 {
 		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
+		reg = <0x700 0x60>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
+		ranges = <0 0x700 0x60>;
 
 		rtc_clkctrl: rtc-clkctrl@20 {
 			compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@
 		};
 	};
 
+	vpe_cm: vpe-cm@760 {
+		compatible = "ti,omap4-cm";
+		reg = <0x760 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x760 0xc>;
+
+		vpe_clkctrl: vpe-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
 };
 
 &cm_core {
@@ -1720,6 +1734,20 @@
 		};
 	};
 
+	cam_cm: cam-cm@1000 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		cam_clkctrl: cam-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x2c>;
+			#clock-cells = <2>;
+		};
+	};
+
 	dss_cm: dss-cm@1100 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1100 0x100>;
@@ -1734,6 +1762,20 @@
 		};
 	};
 
+	gpu_cm: gpu-cm@1200 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		gpu_clkctrl: gpu-clkctrl@20 {
+			compatible = "ti,clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
 	l3init_cm: l3init-cm@1300 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1300 0x100>;
diff --git a/dts/src/arm/e60k02.dtsi b/dts/src/arm/e60k02.dtsi
index 5a2c532043..ce50c4dc6f 100644
--- a/dts/src/arm/e60k02.dtsi
+++ b/dts/src/arm/e60k02.dtsi
@@ -48,7 +48,8 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
 
diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi
index b016b0b683..044e5da64a 100644
--- a/dts/src/arm/exynos3250.dtsi
+++ b/dts/src/arm/exynos3250.dtsi
@@ -145,12 +145,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x40000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@3f000 {
+			smp-sram@3f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x3f000 0x1000>;
 			};
diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts
index 09d3d54d09..a1bdf7830a 100644
--- a/dts/src/arm/exynos4210-universal_c210.dts
+++ b/dts/src/arm/exynos4210-universal_c210.dts
@@ -590,16 +590,16 @@
 };
 
 &sysram {
-	smp-sysram@0 {
+	smp-sram@0 {
 		status = "disabled";
 	};
 
-	smp-sysram@5000 {
+	smp-sram@5000 {
 		compatible = "samsung,exynos4210-sysram";
 		reg = <0x5000 0x1000>;
 	};
 
-	smp-sysram@1f000 {
+	smp-sram@1f000 {
 		status = "disabled";
 	};
 };
diff --git a/dts/src/arm/exynos4210.dtsi b/dts/src/arm/exynos4210.dtsi
index 554819ae14..b4466232f0 100644
--- a/dts/src/arm/exynos4210.dtsi
+++ b/dts/src/arm/exynos4210.dtsi
@@ -79,12 +79,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x20000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@1f000 {
+			smp-sram@1f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x1f000 0x1000>;
 			};
diff --git a/dts/src/arm/exynos4412-galaxy-s3.dtsi b/dts/src/arm/exynos4412-galaxy-s3.dtsi
index ce87d2ff27..31719c079d 100644
--- a/dts/src/arm/exynos4412-galaxy-s3.dtsi
+++ b/dts/src/arm/exynos4412-galaxy-s3.dtsi
@@ -168,3 +168,8 @@
 	vdda-supply = <&ldo17_reg>;
 	status = "okay";
 };
+
+&touchkey_reg {
+	gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/dts/src/arm/exynos4412-midas.dtsi b/dts/src/arm/exynos4412-midas.dtsi
index 83be3a7974..3023bc3b68 100644
--- a/dts/src/arm/exynos4412-midas.dtsi
+++ b/dts/src/arm/exynos4412-midas.dtsi
@@ -13,6 +13,7 @@
 #include "exynos4412.dtsi"
 #include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/pinctrl/samsung.h>
@@ -92,6 +93,15 @@
 		enable-active-high;
 	};
 
+	touchkey_reg: voltage-regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VDD_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -197,6 +207,25 @@
 		};
 	};
 
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_reg>;
+			vcc-supply = <&ldo5_reg>;
+			interrupt-parent = <&gpj0>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			linux,keycodes = <KEY_BACK KEY_MENU>;
+		};
+	};
+
 	i2c-mhl {
 		compatible = "i2c-gpio";
 		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/exynos4412-n710x.dts b/dts/src/arm/exynos4412-n710x.dts
index fe2bfd76cc..98cd1284cd 100644
--- a/dts/src/arm/exynos4412-n710x.dts
+++ b/dts/src/arm/exynos4412-n710x.dts
@@ -73,3 +73,8 @@
 	vdda-supply = <&cam_vdda_reg>;
 	status = "okay";
 };
+
+&touchkey_reg {
+	gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi
index ea55f377d1..9c39e82e4e 100644
--- a/dts/src/arm/exynos4412-odroid-common.dtsi
+++ b/dts/src/arm/exynos4412-odroid-common.dtsi
@@ -267,7 +267,7 @@
 
 		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
 		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 		initial-mode = <1>;
 	};
 
diff --git a/dts/src/arm/exynos4412-tiny4412.dts b/dts/src/arm/exynos4412-tiny4412.dts
index 01f37b5ac9..3a91de8a80 100644
--- a/dts/src/arm/exynos4412-tiny4412.dts
+++ b/dts/src/arm/exynos4412-tiny4412.dts
@@ -66,6 +66,31 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	panel {
+		compatible = "innolux,at070tn92";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@3 {
+		reg = <3>;
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
+	};
 };
 
 &rtc {
diff --git a/dts/src/arm/exynos4412.dtsi b/dts/src/arm/exynos4412.dtsi
index 5022aa574b..4886894737 100644
--- a/dts/src/arm/exynos4412.dtsi
+++ b/dts/src/arm/exynos4412.dtsi
@@ -195,12 +195,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x40000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@2f000 {
+			smp-sram@2f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x2f000 0x1000>;
 			};
diff --git a/dts/src/arm/exynos5.dtsi b/dts/src/arm/exynos5.dtsi
index 4801ca759f..22eb951c61 100644
--- a/dts/src/arm/exynos5.dtsi
+++ b/dts/src/arm/exynos5.dtsi
@@ -36,7 +36,7 @@
 		ranges;
 
 		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid", "syscon";
+			compatible = "samsung,exynos4210-chipid";
 			reg = <0x10000000 0x100>;
 		};
 
diff --git a/dts/src/arm/exynos5250-arndale.dts b/dts/src/arm/exynos5250-arndale.dts
index d6c85efdb4..f8ebc620f4 100644
--- a/dts/src/arm/exynos5250-arndale.dts
+++ b/dts/src/arm/exynos5250-arndale.dts
@@ -15,7 +15,7 @@
 #include "exynos5250.dtsi"
 
 / {
-	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	model = "Insignal Arndale evaluation board based on Exynos5250";
 	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
 	memory@40000000 {
@@ -154,7 +154,7 @@
 		compatible = "smsc,usb3503a";
 
 		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/dts/src/arm/exynos5250-smdk5250.dts b/dts/src/arm/exynos5250-smdk5250.dts
index 6dc96948a9..5c42df024a 100644
--- a/dts/src/arm/exynos5250-smdk5250.dts
+++ b/dts/src/arm/exynos5250-smdk5250.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5250 board device tree source
+ * Samsung SMDK5250 board device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -12,7 +12,7 @@
 #include "exynos5250.dtsi"
 
 / {
-	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	model = "Samsung SMDK5250 board based on Exynos5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi
index e1f0215e39..b6135af7ef 100644
--- a/dts/src/arm/exynos5250.dtsi
+++ b/dts/src/arm/exynos5250.dtsi
@@ -1,16 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5250 SoC device tree source
+ * Samsung Exynos5250 SoC device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
+ * Samsung Exynos5250 SoC device nodes are listed in this file.
+ * Exynos5250 based board files can include this file and provide
  * values for board specfic bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
  * additional nodes can be added to this file.
  */
 
@@ -171,12 +171,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x30000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@2f000 {
+			smp-sram@2f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x2f000 0x1000>;
 			};
diff --git a/dts/src/arm/exynos5260-xyref5260.dts b/dts/src/arm/exynos5260-xyref5260.dts
index 36a2b77eeb..0dc2ec16aa 100644
--- a/dts/src/arm/exynos5260-xyref5260.dts
+++ b/dts/src/arm/exynos5260-xyref5260.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG XYREF5260 board device tree source
+ * Samsung XYREF5260 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,7 +10,7 @@
 #include "exynos5260.dtsi"
 
 / {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+	model = "Samsung XYREF5260 board based on Exynos5260";
 	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
 
 	memory@20000000 {
diff --git a/dts/src/arm/exynos5260.dtsi b/dts/src/arm/exynos5260.dtsi
index b0811dbbb3..154df70128 100644
--- a/dts/src/arm/exynos5260.dtsi
+++ b/dts/src/arm/exynos5260.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5260 SoC device tree source
+ * Samsung Exynos5260 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts
index e0db251e25..4f9297ae07 100644
--- a/dts/src/arm/exynos5410-odroidxu.dts
+++ b/dts/src/arm/exynos5410-odroidxu.dts
@@ -170,7 +170,7 @@
 
 		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
 		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 		initial-mode = <1>;
 
 		clock-names = "refclk";
diff --git a/dts/src/arm/exynos5410-smdk5410.dts b/dts/src/arm/exynos5410-smdk5410.dts
index dffa5e3ed9..5282b5deca 100644
--- a/dts/src/arm/exynos5410-smdk5410.dts
+++ b/dts/src/arm/exynos5410-smdk5410.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5410 board device tree source
+ * Samsung SMDK5410 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -10,7 +10,7 @@
 #include "exynos5410.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 / {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
+	model = "Samsung SMDK5410 board based on Exynos5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
 
 	memory@40000000 {
diff --git a/dts/src/arm/exynos5410.dtsi b/dts/src/arm/exynos5410.dtsi
index a4b03d4c3d..2eab80bf5f 100644
--- a/dts/src/arm/exynos5410.dtsi
+++ b/dts/src/arm/exynos5410.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5410 SoC device tree source
+ * Samsung Exynos5410 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
- * EXYNOS5410 based board files can include this file and provide
+ * Samsung Exynos5410 SoC device nodes are listed in this file.
+ * Exynos5410 based board files can include this file and provide
  * values for board specfic bindings.
  */
 
diff --git a/dts/src/arm/exynos5420-arndale-octa.dts b/dts/src/arm/exynos5420-arndale-octa.dts
index 592d7b45ec..ee28d30f54 100644
--- a/dts/src/arm/exynos5420-arndale-octa.dts
+++ b/dts/src/arm/exynos5420-arndale-octa.dts
@@ -15,7 +15,7 @@
 #include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
-	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+	model = "Insignal Arndale Octa evaluation board based on Exynos5420";
 	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
 	memory@20000000 {
diff --git a/dts/src/arm/exynos5420-cpus.dtsi b/dts/src/arm/exynos5420-cpus.dtsi
index 0ee6e92a3c..58d1c54cf9 100644
--- a/dts/src/arm/exynos5420-cpus.dtsi
+++ b/dts/src/arm/exynos5420-cpus.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5420 SoC cpu device tree source
+ * Samsung Exynos5420 SoC cpu device tree source
  *
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/dts/src/arm/exynos5420-smdk5420.dts b/dts/src/arm/exynos5420-smdk5420.dts
index 8240e51869..e3f2afe835 100644
--- a/dts/src/arm/exynos5420-smdk5420.dts
+++ b/dts/src/arm/exynos5420-smdk5420.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5420 board device tree source
+ * Samsung SMDK5420 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -12,7 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Samsung SMDK5420 board based on EXYNOS5420";
+	model = "Samsung SMDK5420 board based on Exynos5420";
 	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
 	memory@20000000 {
diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi
index d39907a41f..b672080e74 100644
--- a/dts/src/arm/exynos5420.dtsi
+++ b/dts/src/arm/exynos5420.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5420 SoC device tree source
+ * Samsung Exynos5420 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
+ * Samsung Exynos5420 SoC device nodes are listed in this file.
+ * Exynos5420 based board files can include this file and provide
  * values for board specfic bindings.
  */
 
@@ -48,62 +48,62 @@
 
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1250000>;
+			opp-microvolt = <1250000 1250000 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1700000000 {
 			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1212500>;
+			opp-microvolt = <1212500 1212500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1175000>;
+			opp-microvolt = <1175000 1175000 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1137500>;
+			opp-microvolt = <1137500 1137500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1112500>;
+			opp-microvolt = <1112500 1112500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1062500>;
+			opp-microvolt = <1062500 1062500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1037500>;
+			opp-microvolt = <1037500 1037500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1012500>;
+			opp-microvolt = <1012500 1012500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = < 987500>;
+			opp-microvolt = < 987500 987500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-900000000 {
 			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = < 962500>;
+			opp-microvolt = < 962500 962500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = < 937500>;
+			opp-microvolt = < 937500 937500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 		opp-700000000 {
 			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = < 912500>;
+			opp-microvolt = < 912500 912500 1500000>;
 			clock-latency-ns = <140000>;
 		};
 	};
@@ -744,6 +744,56 @@
 			iommus = <&sysmmu_gscl1>;
 		};
 
+		gpu: gpu@11800000 {
+			compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+			reg = <0x11800000 0x5000>;
+			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&clock CLK_G3D>;
+			clock-names = "core";
+			power-domains = <&g3d_pd>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+			#cooling-cells = <2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-177000000 {
+					opp-hz = /bits/ 64 <177000000>;
+					opp-microvolt = <812500>;
+				};
+				opp-266000000 {
+					opp-hz = /bits/ 64 <266000000>;
+					opp-microvolt = <862500>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <912500>;
+				};
+				opp-420000000 {
+					opp-hz = /bits/ 64 <420000000>;
+					opp-microvolt = <962500>;
+				};
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-543000000 {
+					opp-hz = /bits/ 64 <543000000>;
+					opp-microvolt = <1037500>;
+				};
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-microvolt = <1150000>;
+				};
+			};
+		};
+
 		scaler_0: scaler@12800000 {
 			compatible = "samsung,exynos5420-scaler";
 			reg = <0x12800000 0x1294>;
@@ -1042,7 +1092,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_wcore_opp_table>;
 			status = "disabled";
 		};
 
@@ -1050,7 +1099,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_noc_opp_table>;
 			status = "disabled";
 		};
 
@@ -1058,7 +1106,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
 			status = "disabled";
 		};
 
@@ -1066,7 +1113,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
 			status = "disabled";
 		};
 
@@ -1074,7 +1120,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys2_opp_table>;
 			status = "disabled";
 		};
 
@@ -1082,7 +1127,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK333>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_mfc_opp_table>;
 			status = "disabled";
 		};
 
@@ -1090,7 +1134,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK266>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_gen_opp_table>;
 			status = "disabled";
 		};
 
@@ -1098,7 +1141,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK66>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
 			status = "disabled";
 		};
 
@@ -1106,7 +1148,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_opp_table>;
 			status = "disabled";
 		};
 
@@ -1114,7 +1155,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_acp_opp_table>;
 			status = "disabled";
 		};
 
@@ -1122,7 +1162,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_opp_table>;
 			status = "disabled";
 		};
 
@@ -1130,7 +1169,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK166>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_apb_opp_table>;
 			status = "disabled";
 		};
 
@@ -1138,7 +1176,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_fimd_opp_table>;
 			status = "disabled";
 		};
 
@@ -1146,7 +1183,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_opp_table>;
 			status = "disabled";
 		};
 
@@ -1154,7 +1190,6 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_gscl_opp_table>;
 			status = "disabled";
 		};
 
@@ -1162,252 +1197,8 @@
 			compatible = "samsung,exynos-bus";
 			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
 			clock-names = "bus";
-			operating-points-v2 = <&bus_mscl_opp_table>;
 			status = "disabled";
 		};
-
-		bus_wcore_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-				opp-microvolt = <925000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-				opp-microvolt = <950000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-				opp-microvolt = <950000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-				opp-microvolt = <950000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <987500>;
-			};
-		};
-
-		bus_noc_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <86000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_apb_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp00 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys2_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-		};
-
-		bus_mfc_opp_table: opp_table6 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <96000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_gen_opp_table: opp_table7 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <89000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp_table8 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-		};
-
-		bus_g2d_opp_table: opp_table9 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_g2d_acp_opp_table: opp_table10 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_jpeg_opp_table: opp_table11 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_jpeg_apb_opp_table: opp_table12 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-		};
-
-		bus_disp1_fimd_opp_table: opp_table13 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_disp1_opp_table: opp_table14 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_gscl_opp_table: opp_table15 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_mscl_opp_table: opp_table16 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
 	};
 
 	thermal-zones {
diff --git a/dts/src/arm/exynos5422-cpus.dtsi b/dts/src/arm/exynos5422-cpus.dtsi
index e4a5857c13..1b8605cf24 100644
--- a/dts/src/arm/exynos5422-cpus.dtsi
+++ b/dts/src/arm/exynos5422-cpus.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5422 SoC cpu device tree source
+ * Samsung Exynos5422 SoC cpu device tree source
  *
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi
index 059fa32d1a..5cf1aed204 100644
--- a/dts/src/arm/exynos5422-odroid-core.dtsi
+++ b/dts/src/arm/exynos5422-odroid-core.dtsi
@@ -35,7 +35,264 @@
 		};
 	};
 
-	dmc_opp_table: opp_table2 {
+	bus_wcore_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+			opp-microvolt = <925000 925000 1400000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <177400000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <532000000>;
+			opp-microvolt = <1000000 1000000 1400000>;
+		};
+	};
+
+	bus_noc_opp_table: opp_table3 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <74000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+	};
+
+	bus_fsys_apb_opp_table: opp_table4 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+	};
+
+	bus_fsys2_opp_table: opp_table5 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_mfc_opp_table: opp_table6 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_gen_opp_table: opp_table7 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp_table8 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+	};
+
+	bus_g2d_opp_table: opp_table9 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_g2d_acp_opp_table: opp_table10 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_jpeg_opp_table: opp_table11 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_jpeg_apb_opp_table: opp_table12 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+	};
+
+	bus_disp1_fimd_opp_table: opp_table13 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_disp1_opp_table: opp_table14 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp_table15 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_mscl_opp_table: opp_table16 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <666000000>;
+		};
+	};
+
+	dmc_opp_table: opp_table17 {
 		compatible = "operating-points-v2";
 
 		opp00 {
@@ -134,6 +391,7 @@
 };
 
 &bus_wcore {
+	operating-points-v2 = <&bus_wcore_opp_table>;
 	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
 			<&nocp_mem1_0>, <&nocp_mem1_1>;
 	vdd-supply = <&buck3_reg>;
@@ -142,76 +400,91 @@
 };
 
 &bus_noc {
+	operating-points-v2 = <&bus_noc_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_fsys_apb {
+	operating-points-v2 = <&bus_fsys_apb_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_fsys {
+	operating-points-v2 = <&bus_fsys2_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_fsys2 {
+	operating-points-v2 = <&bus_fsys2_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_mfc {
+	operating-points-v2 = <&bus_mfc_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_gen {
+	operating-points-v2 = <&bus_gen_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_peri {
+	operating-points-v2 = <&bus_peri_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_g2d {
+	operating-points-v2 = <&bus_g2d_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_g2d_acp {
+	operating-points-v2 = <&bus_g2d_acp_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_jpeg {
+	operating-points-v2 = <&bus_jpeg_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_jpeg_apb {
+	operating-points-v2 = <&bus_jpeg_apb_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_disp1_fimd {
+	operating-points-v2 = <&bus_disp1_fimd_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_disp1 {
+	operating-points-v2 = <&bus_disp1_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_gscl_scaler {
+	operating-points-v2 = <&bus_gscl_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
 
 &bus_mscl {
+	operating-points-v2 = <&bus_mscl_opp_table>;
 	devfreq = <&bus_wcore>;
 	status = "okay";
 };
@@ -601,6 +874,8 @@
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -613,6 +888,8 @@
 				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 				regulator-boot-on;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -623,7 +900,6 @@
 				regulator-name = "vdd_g3d";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
 				regulator-boot-on;
 
 				regulator-state-mem {
@@ -771,6 +1047,11 @@
 	vtmu-supply = <&ldo7_reg>;
 };
 
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
diff --git a/dts/src/arm/exynos5422-odroidhc1.dts b/dts/src/arm/exynos5422-odroidhc1.dts
index d271e75488..f163206265 100644
--- a/dts/src/arm/exynos5422-odroidhc1.dts
+++ b/dts/src/arm/exynos5422-odroidhc1.dts
@@ -72,14 +72,14 @@
 				 */
 				map1 {
 					trip = <&cpu0_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -116,14 +116,14 @@
 				};
 				map1 {
 					trip = <&cpu1_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -160,14 +160,14 @@
 				};
 				map1 {
 					trip = <&cpu2_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -204,14 +204,14 @@
 				};
 				map1 {
 					trip = <&cpu3_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi
index 8388720374..1865a708b4 100644
--- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi
+++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi
@@ -107,7 +107,7 @@
 				/*
 				 * When reaching cpu0_alert3, reduce CPU
 				 * by 2 steps. On Exynos5422/5800 that would
-				 * be: 1600 MHz and 1100 MHz.
+				 * (usually) be: 1800 MHz and 1200 MHz.
 				 */
 				map3 {
 					trip = <&cpu0_alert3>;
@@ -122,19 +122,19 @@
 				};
 				/*
 				 * When reaching cpu0_alert4, reduce CPU
-				 * further, down to 600 MHz (12 steps for big,
-				 * 7 steps for LITTLE).
+				 * further, down to 600 MHz (14 steps for big,
+				 * 8 steps for LITTLE).
 				 */
-				map4 {
+				cpu0_cooling_map4: map4 {
 					trip = <&cpu0_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -198,16 +198,16 @@
 							 <&cpu6 0 2>,
 							 <&cpu7 0 2>;
 				};
-				map4 {
+				cpu1_cooling_map4: map4 {
 					trip = <&cpu1_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -271,16 +271,16 @@
 							 <&cpu6 0 2>,
 							 <&cpu7 0 2>;
 				};
-				map4 {
+				cpu2_cooling_map4: map4 {
 					trip = <&cpu2_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
@@ -344,16 +344,16 @@
 							 <&cpu6 0 2>,
 							 <&cpu7 0 2>;
 				};
-				map4 {
+				cpu3_cooling_map4: map4 {
 					trip = <&cpu3_alert4>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
 				};
 			};
 		};
diff --git a/dts/src/arm/exynos5422-odroidxu3-lite.dts b/dts/src/arm/exynos5422-odroidxu3-lite.dts
index a31ca2ef75..98feecad54 100644
--- a/dts/src/arm/exynos5422-odroidxu3-lite.dts
+++ b/dts/src/arm/exynos5422-odroidxu3-lite.dts
@@ -30,6 +30,64 @@
 	samsung,asv-bin = <2>;
 };
 
+/*
+ * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
+ * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
+ * Therefore we need to update OPPs tables and thermal maps accordingly.
+ */
+&cluster_a15_opp_table {
+	/delete-node/opp-2000000000;
+	/delete-node/opp-1900000000;
+};
+
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
+&cpu0_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu1_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu2_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu3_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
 &pwm {
 	/*
 	 * PWM 0 -- fan
diff --git a/dts/src/arm/exynos54xx.dtsi b/dts/src/arm/exynos54xx.dtsi
index f78dee801c..8aa5117e58 100644
--- a/dts/src/arm/exynos54xx.dtsi
+++ b/dts/src/arm/exynos54xx.dtsi
@@ -62,12 +62,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x54000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@53000 {
+			smp-sram@53000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x53000 0x1000>;
 			};
diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts
index 60ca3d6852..60ab0effe4 100644
--- a/dts/src/arm/exynos5800-peach-pi.dts
+++ b/dts/src/arm/exynos5800-peach-pi.dts
@@ -156,6 +156,15 @@
 	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
 };
 
+/*
+ * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
+ * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards.  Thus we need to
+ * update A7 OPPs table accordingly.
+ */
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
 &cpu0 {
 	cpu-supply = <&buck2_reg>;
 };
@@ -257,6 +266,8 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -269,6 +280,8 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
diff --git a/dts/src/arm/exynos5800.dtsi b/dts/src/arm/exynos5800.dtsi
index 16177d815e..dfb99ab53c 100644
--- a/dts/src/arm/exynos5800.dtsi
+++ b/dts/src/arm/exynos5800.dtsi
@@ -1,12 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5800 SoC device tree source
+ * Samsung Exynos5800 SoC device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
+ * Samsung Exynos5800 SoC device nodes are listed in this file.
+ * Exynos5800 based board files can include this file and provide
  * values for board specfic bindings.
  */
 
@@ -21,67 +21,87 @@
 };
 
 &cluster_a15_opp_table {
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <1312500>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1900000000 {
+		opp-hz = /bits/ 64 <1900000000>;
+		opp-microvolt = <1262500>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1237500>;
+		clock-latency-ns = <140000>;
+	};
 	opp-1700000000 {
-		opp-microvolt = <1250000>;
+		opp-microvolt = <1250000 1250000 1500000>;
 	};
 	opp-1600000000 {
-		opp-microvolt = <1250000>;
+		opp-microvolt = <1250000 1250000 1500000>;
 	};
 	opp-1500000000 {
-		opp-microvolt = <1100000>;
+		opp-microvolt = <1100000 1100000 1500000>;
 	};
 	opp-1400000000 {
-		opp-microvolt = <1100000>;
+		opp-microvolt = <1100000 1100000 1500000>;
 	};
 	opp-1300000000 {
-		opp-microvolt = <1100000>;
+		opp-microvolt = <1100000 1100000 1500000>;
 	};
 	opp-1200000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-1100000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-1000000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-900000000 {
-		opp-microvolt = <1000000>;
+		opp-microvolt = <1000000 1000000 1500000>;
 	};
 	opp-800000000 {
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 	};
 	opp-700000000 {
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 	};
 	opp-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-500000000 {
 		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-400000000 {
 		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-200000000 {
 		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
+		opp-microvolt = <900000 900000 1500000>;
 		clock-latency-ns = <140000>;
 	};
 };
 
 &cluster_a7_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-microvolt = <1275000>;
+		clock-latency-ns = <140000>;
+	};
 	opp-1300000000 {
 		opp-microvolt = <1250000>;
 	};
diff --git a/dts/src/arm/ibm-power9-dual.dtsi b/dts/src/arm/ibm-power9-dual.dtsi
index 2abc42eda7..a0fa65b44b 100644
--- a/dts/src/arm/ibm-power9-dual.dtsi
+++ b/dts/src/arm/ibm-power9-dual.dtsi
@@ -86,7 +86,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			fsi_occ0: occ {
+			fsi_occ0: occ@1 {
 				compatible = "ibm,p9-occ";
 			};
 		};
@@ -187,7 +187,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			fsi_occ1: occ {
+			fsi_occ1: occ@2 {
 				compatible = "ibm,p9-occ";
 			};
 		};
diff --git a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
index 0fde90df2b..3f38c2e60a 100644
--- a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -165,8 +165,6 @@
 };
 
 &usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx25-pdk.dts b/dts/src/arm/imx25-pdk.dts
index 05cccd1262..fb66884d8a 100644
--- a/dts/src/arm/imx25-pdk.dts
+++ b/dts/src/arm/imx25-pdk.dts
@@ -304,8 +304,6 @@
 };
 
 &usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
 	status = "okay";
 };
 
diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi
index 9a097ef014..40b95a290b 100644
--- a/dts/src/arm/imx25.dtsi
+++ b/dts/src/arm/imx25.dtsi
@@ -570,6 +570,9 @@
 				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
+				maximum-speed = "full-speed";
+				phy_type = "serial";
+				dr_mode = "host";
 				status = "disabled";
 			};
 
diff --git a/dts/src/arm/imx51-babbage.dts b/dts/src/arm/imx51-babbage.dts
index ed6a3ce874..552196d8a6 100644
--- a/dts/src/arm/imx51-babbage.dts
+++ b/dts/src/arm/imx51-babbage.dts
@@ -58,29 +58,27 @@
 
 	display1: disp1 {
 		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: dvi {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
 
-		port {
+		port@0 {
+		reg = <0>;
+
 			display0_in: endpoint {
 				remote-endpoint = <&ipu_di0_disp1>;
 			};
 		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
 	};
 
 	display2: disp2 {
@@ -115,6 +113,42 @@
 		};
 	};
 
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
diff --git a/dts/src/arm/imx6dl-gw5907.dts b/dts/src/arm/imx6dl-gw5907.dts
new file mode 100644
index 0000000000..3fa2822bef
--- /dev/null
+++ b/dts/src/arm/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/dts/src/arm/imx6dl-gw5910.dts b/dts/src/arm/imx6dl-gw5910.dts
new file mode 100644
index 0000000000..0d5e7e5da5
--- /dev/null
+++ b/dts/src/arm/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/dts/src/arm/imx6dl-gw5912.dts b/dts/src/arm/imx6dl-gw5912.dts
new file mode 100644
index 0000000000..5260e0142d
--- /dev/null
+++ b/dts/src/arm/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/dts/src/arm/imx6dl-gw5913.dts b/dts/src/arm/imx6dl-gw5913.dts
new file mode 100644
index 0000000000..b74e533c8e
--- /dev/null
+++ b/dts/src/arm/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/dts/src/arm/imx6dl-icore-mipi.dts b/dts/src/arm/imx6dl-icore-mipi.dts
index e43bccb78a..d8f3821a0f 100644
--- a/dts/src/arm/imx6dl-icore-mipi.dts
+++ b/dts/src/arm/imx6dl-icore-mipi.dts
@@ -8,7 +8,7 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
 
 / {
 	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
diff --git a/dts/src/arm/imx6q-dhcom-pdk2.dts b/dts/src/arm/imx6q-dhcom-pdk2.dts
index 5219553df1..bb74fc62d9 100644
--- a/dts/src/arm/imx6q-dhcom-pdk2.dts
+++ b/dts/src/arm/imx6q-dhcom-pdk2.dts
@@ -63,7 +63,7 @@
 		#sound-dai-cells = <0>;
 		clocks = <&clk_ext_audio_codec>;
 		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
 	};
 };
 
diff --git a/dts/src/arm/imx6q-dhcom-som.dtsi b/dts/src/arm/imx6q-dhcom-som.dtsi
index 845cfad99b..87f0aa8970 100644
--- a/dts/src/arm/imx6q-dhcom-som.dtsi
+++ b/dts/src/arm/imx6q-dhcom-som.dtsi
@@ -204,7 +204,7 @@
 	};
 
 	rtc@56 {
-		compatible = "rv3029c2";
+		compatible = "microcrystal,rv3029";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc_hw300>;
 		reg = <0x56>;
diff --git a/dts/src/arm/imx6q-gw5907.dts b/dts/src/arm/imx6q-gw5907.dts
new file mode 100644
index 0000000000..b25526ef58
--- /dev/null
+++ b/dts/src/arm/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/dts/src/arm/imx6q-gw5910.dts b/dts/src/arm/imx6q-gw5910.dts
new file mode 100644
index 0000000000..6aafa2fcee
--- /dev/null
+++ b/dts/src/arm/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/dts/src/arm/imx6q-gw5912.dts b/dts/src/arm/imx6q-gw5912.dts
new file mode 100644
index 0000000000..4dcbd943cd
--- /dev/null
+++ b/dts/src/arm/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/dts/src/arm/imx6q-gw5913.dts b/dts/src/arm/imx6q-gw5913.dts
new file mode 100644
index 0000000000..6f511f1665
--- /dev/null
+++ b/dts/src/arm/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/dts/src/arm/imx6q-logicpd.dts b/dts/src/arm/imx6q-logicpd.dts
index d96ae54be3..7a3d1d3e54 100644
--- a/dts/src/arm/imx6q-logicpd.dts
+++ b/dts/src/arm/imx6q-logicpd.dts
@@ -73,6 +73,16 @@
 	status = "okay";
 };
 
+&i2c1 {
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
 &ldb {
 	status = "okay";
 
diff --git a/dts/src/arm/imx6qdl-apalis.dtsi b/dts/src/arm/imx6qdl-apalis.dtsi
index ff1287e6b7..1b5bc6b5e8 100644
--- a/dts/src/arm/imx6qdl-apalis.dtsi
+++ b/dts/src/arm/imx6qdl-apalis.dtsi
@@ -200,7 +200,7 @@
 
 &hdmi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
 	status = "disabled";
 };
 
diff --git a/dts/src/arm/imx6qdl-gw5907.dtsi b/dts/src/arm/imx6qdl-gw5907.dtsi
new file mode 100644
index 0000000000..0bdebddffd
--- /dev/null
+++ b/dts/src/arm/imx6qdl-gw5907.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-gw5910.dtsi b/dts/src/arm/imx6qdl-gw5910.dtsi
new file mode 100644
index 0000000000..be1af7482f
--- /dev/null
+++ b/dts/src/arm/imx6qdl-gw5910.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_wl: regulator-wl {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_bt: regulator-bt {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bt>;
+		compatible = "regulator-fixed";
+		regulator-name = "bt";
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* serial console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* GPS */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_bt: regbtgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-gw5912.dtsi b/dts/src/arm/imx6qdl-gw5912.dtsi
new file mode 100644
index 0000000000..8c57fd2f9a
--- /dev/null
+++ b/dts/src/arm/imx6qdl-gw5912.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-gw5913.dtsi b/dts/src/arm/imx6qdl-gw5913.dtsi
new file mode 100644
index 0000000000..635c203bd6
--- /dev/null
+++ b/dts/src/arm/imx6qdl-gw5913.dtsi
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/dts/src/arm/imx6qdl-icore-1.5.dtsi b/dts/src/arm/imx6qdl-icore-1.5.dtsi
index d91d46b589..0fd7f2e24d 100644
--- a/dts/src/arm/imx6qdl-icore-1.5.dtsi
+++ b/dts/src/arm/imx6qdl-icore-1.5.dtsi
@@ -25,10 +25,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET_REF>;
-	phy-mode = "rmii";
 	status = "okay";
 };
diff --git a/dts/src/arm/imx6qdl-icore.dtsi b/dts/src/arm/imx6qdl-icore.dtsi
index 7814f1ef08..756f3a9f1b 100644
--- a/dts/src/arm/imx6qdl-icore.dtsi
+++ b/dts/src/arm/imx6qdl-icore.dtsi
@@ -150,10 +150,23 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
 	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
 };
 
 &gpmi {
diff --git a/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi b/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi
index 6486df3e29..978dc1c2ff 100644
--- a/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi
+++ b/dts/src/arm/imx6qdl-phytec-phycore-som.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
 
 / {
 	aliases {
@@ -100,6 +101,10 @@
 			compatible = "dlg,da9062-rtc";
 		};
 
+		da9062_onkey: onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
 		watchdog {
 			compatible = "dlg,da9062-watchdog";
 		};
@@ -109,6 +114,7 @@
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <730000>;
 				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
@@ -116,6 +122,7 @@
 				regulator-name = "vdd_soc";
 				regulator-min-microvolt = <730000>;
 				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
@@ -123,6 +130,7 @@
 				regulator-name = "vdd_ddr3";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <1500000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
@@ -130,6 +138,7 @@
 				regulator-name = "vdd_eth";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
 				regulator-always-on;
 			};
 
diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi
index 71ca76a5e4..fe59dde41b 100644
--- a/dts/src/arm/imx6qdl-sabresd.dtsi
+++ b/dts/src/arm/imx6qdl-sabresd.dtsi
@@ -749,10 +749,6 @@
 	vin-supply = <&vgen5_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen5_reg>;
 };
diff --git a/dts/src/arm/imx6qdl-zii-rdu2.dtsi b/dts/src/arm/imx6qdl-zii-rdu2.dtsi
index a2a4f33a3e..0075637f9b 100644
--- a/dts/src/arm/imx6qdl-zii-rdu2.dtsi
+++ b/dts/src/arm/imx6qdl-zii-rdu2.dtsi
@@ -60,18 +60,6 @@
 		regulator-always-on;
 	};
 
-	reg_5p0v_user_usb: regulator-5p0v-user-usb {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_user_usb>;
-		vin-supply = <&reg_5p0v_main>;
-		regulator-name = "5V_USER_USB";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <1000>;
-	};
-
 	reg_3p3v_pmic: regulator-3p3v-pmic {
 		compatible = "regulator-fixed";
 		vin-supply = <&reg_12p0v>;
@@ -331,6 +319,39 @@
 	};
 };
 
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	usb-emulation {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "usb-emulation";
+	};
+
+	usb-mode1 {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode1";
+	};
+
+	usb-pwr {
+		gpio-hog;
+		gpios = <22 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
+	usb-mode2 {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode2";
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -592,6 +613,16 @@
 		status = "disabled";
 	};
 
+	reg_5p0v_user_usb: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002_pins>;
+		reg = <0x32>;
+		interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+				      <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+		interrupt-names = "a_det", "alert";
+	};
+
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		pinctrl-names = "default";
@@ -629,7 +660,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -642,7 +673,7 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	disable-wp;
 	vmmc-supply = <&reg_3p3v_sd>;
 	vqmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
@@ -776,6 +807,7 @@
 &usbh1 {
 	vbus-supply = <&reg_5p0v_main>;
 	disable-over-current;
+	maximum-speed = "full-speed";
 	status = "okay";
 };
 
@@ -936,6 +968,15 @@
 		>;
 	};
 
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
@@ -983,12 +1024,6 @@
 		>;
 	};
 
-	pinctrl_reg_user_usb: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x40000038
-		>;
-	};
-
 	pinctrl_rmii_phy_irq: phygrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x40010000
@@ -1048,6 +1083,13 @@
 		>;
 	};
 
+	pinctrl_ucs1002_pins: ucs1002grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  	0x1b0b0
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21  	0x1b0b0
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x10059
@@ -1056,7 +1098,6 @@
 			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
 			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
 			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x40010040
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x40010040
 		>;
 	};
@@ -1069,7 +1110,6 @@
 			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x40010040
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x40010040
 
 		>;
diff --git a/dts/src/arm/imx6sl-evk.dts b/dts/src/arm/imx6sl-evk.dts
index 4829aa682a..bc86cfaaa9 100644
--- a/dts/src/arm/imx6sl-evk.dts
+++ b/dts/src/arm/imx6sl-evk.dts
@@ -584,10 +584,6 @@
 	vin-supply = <&sw2_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&sw2_reg>;
 };
diff --git a/dts/src/arm/imx6sl-tolino-shine3.dts b/dts/src/arm/imx6sl-tolino-shine3.dts
new file mode 100644
index 0000000000..27143ea0f0
--- /dev/null
+++ b/dts/src/arm/imx6sl-tolino-shine3.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Shine 3 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60K00+4A4
+ * Serials start with: E60K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Toline Shine 3 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e60k02.dtsi"
+
+/ {
+	model = "Tolino Shine 3";
+	compatible = "kobo,tolino-shine3", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12	0x17059	/* HALL_EN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT0__GPIO2_IO20	0x79
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT2__GPIO2_IO22	0x79
+			MX6SL_PAD_LCD_DAT3__GPIO2_IO23	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x79
+			MX6SL_PAD_KEY_ROW6__GPIO4_IO05		0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh_gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15                  0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11        0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28                         0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/dts/src/arm/imx6sll-evk.dts b/dts/src/arm/imx6sll-evk.dts
index 3e1d32fdf4..5ace9e6acf 100644
--- a/dts/src/arm/imx6sll-evk.dts
+++ b/dts/src/arm/imx6sll-evk.dts
@@ -265,10 +265,6 @@
 	status = "okay";
 };
 
-&reg_3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &snvs_poweroff {
 	status = "okay";
 };
diff --git a/dts/src/arm/imx6sll.dtsi b/dts/src/arm/imx6sll.dtsi
index 85aa8bb985..a1bc5bb317 100644
--- a/dts/src/arm/imx6sll.dtsi
+++ b/dts/src/arm/imx6sll.dtsi
@@ -632,6 +632,15 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 			};
 
+			pxp: pxp@20f0000 {
+				compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
+				reg = <0x20f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "axi";
+			};
+
 			lcdif: lcd-controller@20f8000 {
 				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
 				reg = <0x020f8000 0x4000>;
diff --git a/dts/src/arm/imx6sx-sdb-reva.dts b/dts/src/arm/imx6sx-sdb-reva.dts
index f1830ed387..dce5dcf96c 100644
--- a/dts/src/arm/imx6sx-sdb-reva.dts
+++ b/dts/src/arm/imx6sx-sdb-reva.dts
@@ -6,6 +6,7 @@
 
 / {
 	model = "Freescale i.MX6 SoloX SDB RevA Board";
+	compatible = "fsl,imx6sx-sdb-reva", "fsl,imx6sx";
 };
 
 &i2c1 {
@@ -159,10 +160,6 @@
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };
diff --git a/dts/src/arm/imx6sx-sdb.dts b/dts/src/arm/imx6sx-sdb.dts
index a8ee7087af..5a63ca6157 100644
--- a/dts/src/arm/imx6sx-sdb.dts
+++ b/dts/src/arm/imx6sx-sdb.dts
@@ -141,10 +141,6 @@
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };
diff --git a/dts/src/arm/imx6ul-14x14-evk.dtsi b/dts/src/arm/imx6ul-14x14-evk.dtsi
index 212144511b..265bf4108c 100644
--- a/dts/src/arm/imx6ul-14x14-evk.dtsi
+++ b/dts/src/arm/imx6ul-14x14-evk.dtsi
@@ -327,6 +327,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	no-1-8-v;
+	broken-cd;
 	keep-power-in-suspend;
 	wakeup-source;
 	status = "okay";
diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi
index 6d850d997e..9145c536d7 100644
--- a/dts/src/arm/imx6ull-colibri.dtsi
+++ b/dts/src/arm/imx6ull-colibri.dtsi
@@ -220,7 +220,7 @@
 &iomuxc {
 	pinctrl_can_int: canint-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0X14 /* SODIMM 73 */
+			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
 		>;
 	};
 
@@ -256,15 +256,15 @@
 
 	pinctrl_ecspi1_cs: ecspi1-cs-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x000a0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
 		>;
 	};
 
 	pinctrl_ecspi1: ecspi1-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0
-			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0
-			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100a0 /* SODIMM 90 */
 		>;
 	};
 
@@ -284,68 +284,68 @@
 
 	pinctrl_gpio_bl_on: gpio-bl-on-grp {
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x000a0
+			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
 		>;
 	};
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0X14 /* SODIMM 77 */
-			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x14 /* SODIMM 99 */
-			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x14 /* SODIMM 133 */
-			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x14 /* SODIMM 135 */
-			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x14 /* SODIMM 100 */
-			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x14 /* SODIMM 102 */
-			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x14 /* SODIMM 104 */
-			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x14 /* SODIMM 186 */
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
+			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14	0x10b0 /* SODIMM 133 */
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x10b0 /* SODIMM 135 */
+			MX6UL_PAD_UART3_CTS_B__GPIO1_IO26	0x10b0 /* SODIMM 100 */
+			MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15	0x70a0 /* SODIMM 102 */
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07	0x10b0 /* SODIMM 104 */
+			MX6UL_PAD_UART3_RTS_B__GPIO1_IO27	0x10b0 /* SODIMM 186 */
 		>;
 	};
 
 	pinctrl_gpio2: gpio2-grp { /* Camera */
 		fsl,pins = <
-			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x74 /* SODIMM 69 */
-			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x14 /* SODIMM 75 */
-			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x14 /* SODIMM 85 */
-			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x14 /* SODIMM 96 */
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x14 /* SODIMM 98 */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
+			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x10b0 /* SODIMM 85 */
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x10b0 /* SODIMM 96 */
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x10b0 /* SODIMM 98 */
 		>;
 	};
 
 	pinctrl_gpio3: gpio3-grp { /* CAN2 */
 		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x14 /* SODIMM 178 */
-			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x14 /* SODIMM 188 */
+			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
+			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
 		>;
 	};
 
 	pinctrl_gpio4: gpio4-grp {
 		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x74 /* SODIMM 65 */
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
 		>;
 	};
 
 	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
 		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x74 /* SODIMM 106 */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0xb0a0 /* SODIMM 106 */
 		>;
 	};
 
 	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x14 /* SODIMM 89 */
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x14 /* SODIMM 79 */
-			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x14 /* SODIMM 81 */
-			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x14 /* SODIMM 97 */
-			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x14 /* SODIMM 101 */
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x14 /* SODIMM 103 */
-			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x14 /* SODIMM 94 */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0 /* SODIMM 81 */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x10b0 /* SODIMM 97 */
+			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0 /* SODIMM 101 */
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0 /* SODIMM 103 */
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20		0x10b0 /* SODIMM 94 */
 		>;
 	};
 
 	pinctrl_gpio7: gpio7-grp { /* CAN1 */
 		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0x74 /* SODIMM 55 */
-			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0x74 /* SODIMM 63 */
+			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
+			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
 		>;
 	};
 
@@ -370,15 +370,15 @@
 
 	pinctrl_i2c1: i2c1-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
 	pinctrl_i2c1_gpio: i2c1-gpio-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
@@ -398,107 +398,107 @@
 
 	pinctrl_lcdif_dat: lcdif-dat-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x00079
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x00079
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x00079
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x00079
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x00079
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x00079
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x00079
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x00079
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x00079
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x00079
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x00079
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x00079
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x00079
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x00079
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x00079
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x00079
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x00079
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x00079
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079	/* SODIMM 60 */
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079	/* SODIMM 58 */
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079	/* SODIMM 78 */
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079	/* SODIMM 72 */
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079	/* SODIMM 80 */
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079	/* SODIMM 46 */
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079	/* SODIMM 62 */
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079	/* SODIMM 48 */
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079	/* SODIMM 74 */
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079	/* SODIMM 50 */
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079	/* SODIMM 52 */
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079	/* SODIMM 54 */
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079	/* SODIMM 66 */
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079	/* SODIMM 64 */
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079	/* SODIMM 57 */
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079	/* SODIMM 61 */
 		>;
 	};
 
 	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
 		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x00079	/* SODIMM 68 */
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x00079	/* SODIMM 82 */
 		>;
 	};
 
 	pinctrl_pwm4: pwm4-grp {
 		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079
+			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
 		>;
 	};
 
 	pinctrl_pwm5: pwm5-grp {
 		fsl,pins = <
-			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079
+			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
 		>;
 	};
 
 	pinctrl_pwm6: pwm6-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079
+			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
 		>;
 	};
 
 	pinctrl_pwm7: pwm7-grp {
 		fsl,pins = <
-			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079
+			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
 		>;
 	};
 
 	pinctrl_uart1: uart1-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1
-			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1
+			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
+			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
+			MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS	0x1b0b1	/* SODIMM 27 */
+			MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS	0x1b0b1	/* SODIMM 25 */
 		>;
 	};
 
 	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x1b0b1 /* DCD */
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x1b0b1 /* DSR */
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x1b0b1 /* DTR */
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x1b0b1 /* RI */
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 */
 		>;
 	};
 
 	pinctrl_uart2: uart2-grp {
 		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1
-			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1
-			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1
+			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
+			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
+			MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS	0x1b0b1 /* SODIMM 32 */
+			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
 		>;
 	};
 	pinctrl_uart5: uart5-grp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1
-			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1
+			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
+			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
 		>;
 	};
 
 	pinctrl_usbh_reg: gpio-usbh-reg {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x1b0b1 /* SODIMM 129 USBH PEN */
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 */
 		>;
 	};
 
 	pinctrl_usdhc1: usdhc1-grp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059 /* SODIMM 53 */
 		>;
 	};
 
@@ -533,7 +533,7 @@
 			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
 			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17059
 
-			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x14
+			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
 		>;
 	};
 
@@ -547,23 +547,23 @@
 &iomuxc_snvs {
 	pinctrl_snvs_gpio1: snvs-gpio1-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x14 /* SODIMM 93 */
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x14 /* SODIMM 95 */
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x74 /* SODIMM 105 */
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x14 /* SODIMM 131 USBH OC */
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x74 /* SODIMM 138 */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
 		>;
 	};
 
 	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x74 /* SODIMM 107 */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
 	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
 		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14 /* SODIMM 127 */
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
 		>;
 	};
 
@@ -587,13 +587,13 @@
 
 	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130b0
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
 		>;
 	};
 
 	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* CD */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 */
 		>;
 	};
 
@@ -605,7 +605,7 @@
 
 	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
 		fsl,pins = <
-			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x14
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
 		>;
 	};
 };
diff --git a/dts/src/arm/imx7d-pico.dtsi b/dts/src/arm/imx7d-pico.dtsi
index 6f50ebf31a..e57da0d32b 100644
--- a/dts/src/arm/imx7d-pico.dtsi
+++ b/dts/src/arm/imx7d-pico.dtsi
@@ -7,12 +7,42 @@
 #include "imx7d.dtsi"
 
 / {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0>;
 	};
 
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcdreg_on>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+        };
+
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -230,6 +260,18 @@
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
 &sai1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai1>;
@@ -260,6 +302,8 @@
 };
 
 &pwm4 { /* Backlight */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
 };
 
@@ -413,6 +457,40 @@
 		>;
 	};
 
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x78
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x78
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x78
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14
+		>;
+	};
+
 	pinctrl_pwm1: pwm1 {
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
@@ -431,6 +509,12 @@
 		>;
 	};
 
+	pinctrl_pwm4: pwm4grp{
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT	0x7f
+		>;
+	};
+
 	pinctrl_reg_wlreg_on: regregongrp {
 		fsl,pins = <
 			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x59
@@ -577,6 +661,12 @@
 		>;
 	};
 
+	pinctrl_reg_lcdreg_on: reglcdongrp {
+	fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x59
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
diff --git a/dts/src/arm/imx7d-sdb-reva.dts b/dts/src/arm/imx7d-sdb-reva.dts
index 7ce9d8c919..cabdaa6dc5 100644
--- a/dts/src/arm/imx7d-sdb-reva.dts
+++ b/dts/src/arm/imx7d-sdb-reva.dts
@@ -7,6 +7,9 @@
 #include "imx7d-sdb.dts"
 
 / {
+	model = "Freescale i.MX7 SabreSD RevA Board";
+	compatible = "fsl,imx7d-sdb-reva", "fsl,imx7d";
+
 	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
 		pinctrl-0 = <&pinctrl_usb_otg2_vbus_reg_reva>;
 		gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi
index d8acd7cc79..92f6d0c2a7 100644
--- a/dts/src/arm/imx7d.dtsi
+++ b/dts/src/arm/imx7d.dtsi
@@ -12,7 +12,7 @@
 			clock-frequency = <996000000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>;
-			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cells = <&fuse_grade>;
 			nvmem-cell-names = "speed_grade";
 		};
 
diff --git a/dts/src/arm/imx7s-colibri.dtsi b/dts/src/arm/imx7s-colibri.dtsi
index 1fb1ec5d3d..6d16e32aed 100644
--- a/dts/src/arm/imx7s-colibri.dtsi
+++ b/dts/src/arm/imx7s-colibri.dtsi
@@ -49,3 +49,7 @@
 		reg = <0x80000000 0x10000000>;
 	};
 };
+
+&gpmi {
+	status = "okay";
+};
diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi
index 1b812f4e74..568d7a984a 100644
--- a/dts/src/arm/imx7s.dtsi
+++ b/dts/src/arm/imx7s.dtsi
@@ -152,8 +152,7 @@
 		interrupt-parent = <&gpc>;
 		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>,
-			<&tempmon_temp_grade>;
+		nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
 		nvmem-cell-names = "calib", "temp_grade";
 		clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
 	};
@@ -548,11 +547,7 @@
 					reg = <0x3c 0x4>;
 				};
 
-				tempmon_temp_grade: temp-grade@10 {
-					reg = <0x10 0x4>;
-				};
-
-				cpu_speed_grade: speed-grade@10 {
+				fuse_grade: fuse-grade@10 {
 					reg = <0x10 0x4>;
 				};
 			};
@@ -658,6 +653,12 @@
 						reg = <1>;
 						power-supply = <&reg_1p0d>;
 					};
+
+					pgc_hsic_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <2>;
+						power-supply = <&reg_1p2>;
+					};
 				};
 			};
 		};
@@ -1101,6 +1102,7 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
diff --git a/dts/src/arm/imx7ulp-com.dts b/dts/src/arm/imx7ulp-com.dts
new file mode 100644
index 0000000000..d76fea3b35
--- /dev/null
+++ b/dts/src/arm/imx7ulp-com.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2019 NXP
+
+/dts-v1/;
+
+#include "imx7ulp.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Embedded Artists i.MX7ULP COM";
+	compatible = "ea,imx7ulp-com", "fsl,imx7ulp";
+
+	chosen {
+		stdout-path = &lpuart4;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x4000000>;
+	};
+};
+
+&lpuart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_id>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc0 {
+	assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
+	assigned-clock-parents = <&scg1 IMX7ULP_CLK_APLL_PFD1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart4: lpuart4grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC3__LPUART4_RX	0x3
+			IMX7ULP_PAD_PTC2__LPUART4_TX	0x3
+		>;
+	};
+
+	pinctrl_usbotg1_id: otg1idgrp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTC13__USB0_ID	0x10003
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			IMX7ULP_PAD_PTD1__SDHC0_CMD	0x43
+			IMX7ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			IMX7ULP_PAD_PTD3__SDHC0_D7	0x43
+			IMX7ULP_PAD_PTD4__SDHC0_D6	0x43
+			IMX7ULP_PAD_PTD5__SDHC0_D5	0x43
+			IMX7ULP_PAD_PTD6__SDHC0_D4	0x43
+			IMX7ULP_PAD_PTD7__SDHC0_D3	0x43
+			IMX7ULP_PAD_PTD8__SDHC0_D2	0x43
+			IMX7ULP_PAD_PTD9__SDHC0_D1	0x43
+			IMX7ULP_PAD_PTD10__SDHC0_D0	0x43
+			IMX7ULP_PAD_PTD11__SDHC0_DQS	0x42
+		>;
+	};
+};
diff --git a/dts/src/arm/imx7ulp.dtsi b/dts/src/arm/imx7ulp.dtsi
index d37a1927c8..ab91c98f21 100644
--- a/dts/src/arm/imx7ulp.dtsi
+++ b/dts/src/arm/imx7ulp.dtsi
@@ -37,10 +37,10 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu0: cpu@f00 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
-			reg = <0>;
+			reg = <0xf00>;
 		};
 	};
 
diff --git a/dts/src/arm/iwg20d-q7-common.dtsi b/dts/src/arm/iwg20d-q7-common.dtsi
index ae75a1db3d..ebbe1518ef 100644
--- a/dts/src/arm/iwg20d-q7-common.dtsi
+++ b/dts/src/arm/iwg20d-q7-common.dtsi
@@ -46,6 +46,49 @@
 		clock-frequency = <26000000>;
 	};
 
+	lcd_backlight: backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	lvds-receiver {
+		compatible = "ti,ds90cf384a", "lvds-decoder";
+		powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_receiver_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_receiver_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		backlight = <&lcd_backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_receiver_out>;
+			};
+		};
+	};
+
 	reg_1p5v: 1p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "1P5V";
@@ -89,8 +132,7 @@
 
 		gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
@@ -120,6 +162,18 @@
 	status = "okay";
 };
 
+&du {
+	status = "okay";
+};
+
+&gpio2 {
+	touch-interrupt {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
 &hsusb {
 	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
@@ -147,6 +201,25 @@
 		VDDIO-supply = <&reg_3p3v>;
 		VDDD-supply = <&reg_1p5v>;
 	};
+
+	touch: touchpanel@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_receiver_in>;
+			};
+		};
+	};
 };
 
 &pci0 {
@@ -180,6 +253,11 @@
 		function = "i2c2";
 	};
 
+	pwm3_pins: pwm3 {
+		groups = "pwm3";
+		function = "pwm3";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
@@ -218,6 +296,12 @@
 	};
 };
 
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &rcar_sound {
 	pinctrl-0 = <&sound_pins>;
 	pinctrl-names = "default";
diff --git a/dts/src/arm/iwg20d-q7-dbcm-ca.dtsi b/dts/src/arm/iwg20d-q7-dbcm-ca.dtsi
index 0e99df2182..ede2e0c999 100644
--- a/dts/src/arm/iwg20d-q7-dbcm-ca.dtsi
+++ b/dts/src/arm/iwg20d-q7-dbcm-ca.dtsi
@@ -39,7 +39,6 @@
 &du {
 	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
-	status = "okay";
 
 	ports {
 		port@0 {
diff --git a/dts/src/arm/ls1021a-tsn.dts b/dts/src/arm/ls1021a-tsn.dts
index 5b7689094b..9d8f0c2a8a 100644
--- a/dts/src/arm/ls1021a-tsn.dts
+++ b/dts/src/arm/ls1021a-tsn.dts
@@ -203,11 +203,15 @@
 	/* AR8031 */
 	sgmii_phy1: ethernet-phy@1 {
 		reg = <0x1>;
+		/* SGMII1_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* AR8031 */
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
+		/* SGMII2_PHY_INT_B: connected to IRQ2, active low */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* BCM5464 quad PHY */
diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi
index 2f6977ada4..0855b1fe98 100644
--- a/dts/src/arm/ls1021a.dtsi
+++ b/dts/src/arm/ls1021a.dtsi
@@ -216,6 +216,25 @@
 			compatible = "fsl,ls1021a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1021a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
 		};
 
 		crypto: crypto@1700000 {
diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi
index c4447f6c8b..5d19830905 100644
--- a/dts/src/arm/meson.dtsi
+++ b/dts/src/arm/meson.dtsi
@@ -282,4 +282,11 @@
 			};
 		};
 	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
 }; /* end of / */
diff --git a/dts/src/arm/meson6.dtsi b/dts/src/arm/meson6.dtsi
index 2d31b7ce3f..4716030a48 100644
--- a/dts/src/arm/meson6.dtsi
+++ b/dts/src/arm/meson6.dtsi
@@ -36,13 +36,6 @@
 		ranges = <0x0 0xd0000000 0x40000>;
 	};
 
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-
 	clk81: clk@0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi
index 5a7e3e5cae..eedb925269 100644
--- a/dts/src/arm/meson8.dtsi
+++ b/dts/src/arm/meson8.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2014 Carlo Caione <carlo@caione.org>
  */
 
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8-gpio.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
@@ -129,8 +130,8 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp-182150000 {
-			opp-hz = /bits/ 64 <182150000>;
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
 			opp-microvolt = <1150000>;
 		};
 		opp-318750000 {
@@ -195,6 +196,14 @@
 		#size-cells = <1>;
 		ranges = <0x0 0xc8000000 0x8000>;
 
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
 		dmcbus: bus@6000 {
 			compatible = "simple-bus";
 			reg = <0x6000 0x400>;
@@ -253,7 +262,7 @@
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8-pmu", "syscon";
-		reg = <0xe0 0x8>;
+		reg = <0xe0 0x18>;
 	};
 
 	pinctrl_aobus: pinctrl@84 {
@@ -455,6 +464,8 @@
 &hhi {
 	clkc: clock-controller {
 		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -529,8 +540,7 @@
 
 &saradc {
 	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
-	clocks = <&clkc CLKID_XTAL>,
-		<&clkc CLKID_SAR_ADC>;
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
 	clock-names = "clkin", "core";
 	amlogic,hhi-sysctrl = <&hhi>;
 	nvmem-cells = <&temperature_calib>;
@@ -548,31 +558,31 @@
 };
 
 &timer_abcde {
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk";
 };
 
 &uart_AO {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_A {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_B {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
diff --git a/dts/src/arm/meson8b-ec100.dts b/dts/src/arm/meson8b-ec100.dts
index bed1dfef19..163a200d5a 100644
--- a/dts/src/arm/meson8b-ec100.dts
+++ b/dts/src/arm/meson8b-ec100.dts
@@ -377,7 +377,7 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clocks = <&xtal>, <&xtal>;
 	clock-names = "clkin0", "clkin1";
 };
 
diff --git a/dts/src/arm/meson8b-mxq.dts b/dts/src/arm/meson8b-mxq.dts
index 6e39ad52e4..33037ef62d 100644
--- a/dts/src/arm/meson8b-mxq.dts
+++ b/dts/src/arm/meson8b-mxq.dts
@@ -165,7 +165,7 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clocks = <&xtal>, <&xtal>;
 	clock-names = "clkin0", "clkin1";
 };
 
diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts
index a24eccc354..a2a47804fc 100644
--- a/dts/src/arm/meson8b-odroidc1.dts
+++ b/dts/src/arm/meson8b-odroidc1.dts
@@ -340,7 +340,7 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
+	clocks = <&xtal>, <&xtal>;
 	clock-names = "clkin0", "clkin1";
 };
 
diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi
index 099bf8e711..e34b039b93 100644
--- a/dts/src/arm/meson8b.dtsi
+++ b/dts/src/arm/meson8b.dtsi
@@ -4,6 +4,7 @@
  * Author: Carlo Caione <carlo@endlessm.com>
  */
 
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
@@ -125,8 +126,8 @@
 			opp-hz = /bits/ 64 <255000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp-364300000 {
-			opp-hz = /bits/ 64 <364300000>;
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
 			opp-microvolt = <1100000>;
 		};
 		opp-425000000 {
@@ -172,6 +173,14 @@
 		#size-cells = <1>;
 		ranges = <0x0 0xc8000000 0x8000>;
 
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
 		dmcbus: bus@6000 {
 			compatible = "simple-bus";
 			reg = <0x6000 0x400>;
@@ -433,7 +442,9 @@
 
 &hhi {
 	clkc: clock-controller {
-		compatible = "amlogic,meson8-clkc";
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -508,8 +519,7 @@
 
 &saradc {
 	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
-	clocks = <&clkc CLKID_XTAL>,
-		<&clkc CLKID_SAR_ADC>;
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
 	clock-names = "clkin", "core";
 	amlogic,hhi-sysctrl = <&hhi>;
 	nvmem-cells = <&temperature_calib>;
@@ -523,31 +533,31 @@
 };
 
 &timer_abcde {
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk";
 };
 
 &uart_AO {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_A {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART0>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_B {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART1>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_UART2>;
+	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
 	clock-names = "baud", "xtal", "pclk";
 };
 
diff --git a/dts/src/arm/mmp3-dell-ariel.dts b/dts/src/arm/mmp3-dell-ariel.dts
index c1947b5a68..15449c72c0 100644
--- a/dts/src/arm/mmp3-dell-ariel.dts
+++ b/dts/src/arm/mmp3-dell-ariel.dts
@@ -49,6 +49,28 @@
 	status = "okay";
 };
 
+&hsic0 {
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,2640";
+		reg = <0x01>;
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+
+		mass-storage@1 {
+			compatible = "usb424,4040";
+			reg = <0x01>;
+			status = "disabled";
+		};
+	};
+};
+
+&hsic_phy0 {
+	status = "okay";
+	reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+};
+
 &mmc3 {
 	status = "okay";
 	max-frequency = <50000000>;
diff --git a/dts/src/arm/mmp3.dtsi b/dts/src/arm/mmp3.dtsi
index d9762de0ed..59a108e49b 100644
--- a/dts/src/arm/mmp3.dtsi
+++ b/dts/src/arm/mmp3.dtsi
@@ -201,6 +201,50 @@
 				status = "disabled";
 			};
 
+			hsic_phy0: hsic-phy@f0001800 {
+				compatible = "marvell,mmp3-hsic-phy",
+					     "usb-nop-xceiv";
+				reg = <0xf0001800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic0: hsic@f0001000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0001000 0x200>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC0>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy0>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
+			hsic_phy1: hsic-phy@f0002800 {
+				compatible = "marvell,mmp3-hsic-phy",
+					     "usb-nop-xceiv";
+				reg = <0xf0002800 0x40>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsic1: hsic@f0002000 {
+				compatible = "marvell,pxau2o-ehci";
+				reg = <0xf0002000 0x200>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&soc_clocks MMP2_CLK_USBHSIC1>;
+				clock-names = "USBCLK";
+				phys = <&hsic_phy1>;
+				phy-names = "usb";
+				phy_type = "hsic";
+				#address-cells = <0x01>;
+				#size-cells = <0x00>;
+				status = "disabled";
+			};
+
 			mmc1: mmc@d4280000 {
 				compatible = "mrvl,pxav3-mmc";
 				reg = <0xd4280000 0x120>;
@@ -356,7 +400,7 @@
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
+				reg = <0xd4011000 0x70>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
 				resets = <&soc_clocks MMP2_CLK_TWSI0>;
@@ -368,7 +412,7 @@
 
 			twsi2: i2c@d4031000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4031000 0x1000>;
+				reg = <0xd4031000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <0>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
@@ -380,7 +424,7 @@
 
 			twsi3: i2c@d4032000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4032000 0x1000>;
+				reg = <0xd4032000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <1>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
@@ -392,7 +436,7 @@
 
 			twsi4: i2c@d4033000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033000 0x1000>;
+				reg = <0xd4033000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <2>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
@@ -405,7 +449,7 @@
 
 			twsi5: i2c@d4033800 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033800 0x1000>;
+				reg = <0xd4033800 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <3>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
@@ -417,7 +461,7 @@
 
 			twsi6: i2c@d4034000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4034000 0x1000>;
+				reg = <0xd4034000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <4>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI5>;
diff --git a/dts/src/arm/motorola-cpcap-mapphone.dtsi b/dts/src/arm/motorola-cpcap-mapphone.dtsi
index 936ad010c8..e39eee628a 100644
--- a/dts/src/arm/motorola-cpcap-mapphone.dtsi
+++ b/dts/src/arm/motorola-cpcap-mapphone.dtsi
@@ -27,11 +27,12 @@
 			compatible = "motorola,cpcap-battery";
 			interrupts-extended = <
 				&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
-				&cpcap 20 0 &cpcap 54 0
+				&cpcap 20 0 &cpcap 54 0 &cpcap 57 0
 			>;
 			interrupt-names =
 				"eol", "lowbph", "lowbpl",
-				"chrgcurr1", "battdetb";
+				"chrgcurr1", "battdetb",
+				"cccal";
 			io-channels = <&cpcap_adc 0 &cpcap_adc 1
 				       &cpcap_adc 5 &cpcap_adc 6>;
 			io-channel-names = "battdetb", "battp",
diff --git a/dts/src/arm/motorola-mapphone-common.dtsi b/dts/src/arm/motorola-mapphone-common.dtsi
index da6b107da8..85665506f4 100644
--- a/dts/src/arm/motorola-mapphone-common.dtsi
+++ b/dts/src/arm/motorola-mapphone-common.dtsi
@@ -249,6 +249,13 @@
 	};
 };
 
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
 &i2c1 {
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -440,6 +447,13 @@
 		>;
 	};
 
+	hdq_pins: pinmux_hdq_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
 	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
@@ -650,6 +664,11 @@
 	};
 };
 
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+	status = "disabled";
+};
+
 /* Configure pwm clock source for timers 8 & 9 */
 &timer8 {
 	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
diff --git a/dts/src/arm/omap2.dtsi b/dts/src/arm/omap2.dtsi
index 000bf16de6..0e453fec2e 100644
--- a/dts/src/arm/omap2.dtsi
+++ b/dts/src/arm/omap2.dtsi
@@ -8,6 +8,7 @@
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
@@ -79,17 +80,37 @@
 			reg = <0x480FE000 0x1000>;
 		};
 
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
-			ti,hwmods = "dma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <64>;
+		target-module@48056000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48056000 0x4>,
+			      <0x4805602c 0x4>,
+			      <0x48056028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&core_l3_ck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48056000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap2420-sdma", "ti,omap-sdma";
+				reg = <0 0x1000>;
+				interrupts = <12>,
+					     <13>,
+					     <14>,
+					     <15>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <64>;
+			};
 		};
 
 		i2c1: i2c@48070000 {
diff --git a/dts/src/arm/omap2430.dtsi b/dts/src/arm/omap2430.dtsi
index 7f57af2f10..15ef7593be 100644
--- a/dts/src/arm/omap2430.dtsi
+++ b/dts/src/arm/omap2430.dtsi
@@ -309,6 +309,10 @@
 	};
 };
 
+&sdma {
+	compatible = "ti,omap2430-sdma", "ti,omap-sdma";
+};
+
 &i2c1 {
 	compatible = "ti,omap2430-i2c";
 };
diff --git a/dts/src/arm/omap3-echo.dts b/dts/src/arm/omap3-echo.dts
new file mode 100644
index 0000000000..93ffeddada
--- /dev/null
+++ b/dts/src/arm/omap3-echo.dts
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 André Hentschel <nerv@dawncrow.de>
+ */
+/dts-v1/;
+
+#include "dm3725.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Amazon Echo (first generation)";
+	compatible = "amazon,omap3-echo", "ti,omap3630", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0xc600000>; /* 198 MB */
+	};
+
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <40>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+
+		mute-button {
+			label = "mute";
+			linux,code = <KEY_MUTE>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;	/* GPIO_70 */
+			wakeup-source;
+		};
+
+		help-button {
+			label = "help";
+			linux,code = <KEY_HELP>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;	/* GPIO_72 */
+			wakeup-source;
+		};
+	};
+
+	rotary: rotary-encoder {
+		compatible = "rotary-encoder";
+		gpios = <
+			&gpio3  5 GPIO_ACTIVE_HIGH /* GPIO_69 */
+			&gpio3 12 GPIO_ACTIVE_HIGH /* GPIO_76 */
+		>;
+		linux,axis = <REL_X>;
+		rotary-encoder,relative-axis;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	lp5523A: lp5523A@32 {
+		compatible = "national,lp5523";
+		label = "q1";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523B: lp5523B@33 {
+		compatible = "national,lp5523";
+		label = "q3";
+		reg = <0x33>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523C: lp5523C@34 {
+		compatible = "national,lp5523";
+		label = "q4";
+		reg = <0x34>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+
+	lp5523D: lp552D@35 {
+		compatible = "national,lp5523";
+		label = "q2";
+		reg = <0x35>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+
+		chan0 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan1 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan2 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan3 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan4 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan5 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan6 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan7 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+		chan8 {
+			led-cur = /bits/ 8 <12>;
+			max-cur = /bits/ 8 <15>;
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_INPUT_PULLUP | PIN_OFF_OUTPUT_LOW | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4)	/* dss_data0.gpio_70 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)	/* dss_data2.gpio_72 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_ctl.sdmmc3_cmd */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+		>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmc_reg>;
+};
+
+&mmc3 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	non-removable;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+	ti,system-power-controller;
+
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+
+		vio_reg: regulator@1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_dsp";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index a638e05913..c3c6d7d04a 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -482,6 +482,11 @@
 	regulator-always-on;
 };
 
+/* First two dma channels are reserved on secure omap3 */
+&sdma {
+	dma-channel-mask = <0xfffffffc>;
+};
+
 &twl {
 	twl_audio: audio {
 		compatible = "ti,twl4030-audio";
diff --git a/dts/src/arm/omap3.dtsi b/dts/src/arm/omap3.dtsi
index 5698a3e241..634ea16a71 100644
--- a/dts/src/arm/omap3.dtsi
+++ b/dts/src/arm/omap3.dtsi
@@ -206,17 +206,41 @@
 			reg = <0x48200000 0x1000>;
 		};
 
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <96>;
-			ti,hwmods = "dma";
+		target-module@48056000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x48056000 0x4>,
+			      <0x4805602c 0x4>,
+			      <0x48056028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, core_l3_clkdm */
+			clocks = <&core_l3_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48056000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap3430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <12>,
+					     <13>,
+					     <14>,
+					     <15>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <96>;
+			};
 		};
 
 		gpio1: gpio@48310000 {
diff --git a/dts/src/arm/omap36xx.dtsi b/dts/src/arm/omap36xx.dtsi
index c618cb257d..71f3c8f1f9 100644
--- a/dts/src/arm/omap36xx.dtsi
+++ b/dts/src/arm/omap36xx.dtsi
@@ -223,6 +223,10 @@
 	};
 };
 
+&sdma {
+	compatible = "ti,omap3630-sdma", "ti,omap-sdma";
+};
+
 /* OMAP3630 needs dss_96m_fck for VENC */
 &venc {
 	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
diff --git a/dts/src/arm/omap4-l4-abe.dtsi b/dts/src/arm/omap4-l4-abe.dtsi
index 6c892fc9d7..a6feb201c5 100644
--- a/dts/src/arm/omap4-l4-abe.dtsi
+++ b/dts/src/arm/omap4-l4-abe.dtsi
@@ -219,7 +219,6 @@
 
 		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "dmic";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -279,7 +278,6 @@
 
 		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcpdm";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>;
 			reg-names = "rev", "sysc";
@@ -314,7 +312,6 @@
 
 		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x38000 0x4>,
 			      <0x38010 0x4>;
 			reg-names = "rev", "sysc";
@@ -345,7 +342,6 @@
 
 		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x3a000 0x4>,
 			      <0x3a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -376,7 +372,6 @@
 
 		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x3c000 0x4>,
 			      <0x3c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -407,7 +402,6 @@
 
 		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -466,7 +460,6 @@
 
 		target-module@f1000 {			/* 0x401f1000, ap 32 20.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "aess";
 			reg = <0xf1000 0x4>,
 			      <0xf1010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/dts/src/arm/omap4-l4.dtsi b/dts/src/arm/omap4-l4.dtsi
index 83f803be8e..459fd70275 100644
--- a/dts/src/arm/omap4-l4.dtsi
+++ b/dts/src/arm/omap4-l4.dtsi
@@ -136,7 +136,6 @@
 
 		target-module@56000 {			/* 0x4a056000, ap 7 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@@ -160,7 +159,7 @@
 			ranges = <0x0 0x56000 0x1000>;
 
 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -174,7 +173,6 @@
 
 		target-module@58000 {			/* 0x4a058000, ap 10 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "hsi";
 			reg = <0x58000 0x4>,
 			      <0x58010 0x4>,
 			      <0x58014 0x4>;
@@ -321,7 +319,6 @@
 
 		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmu_dsp";
 			reg = <0x66000 0x4>,
 			      <0x66010 0x4>,
 			      <0x66014 0x4>;
@@ -335,12 +332,18 @@
 			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
 			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
 			clock-names = "fck";
+			resets = <&prm_tesla 1>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x66000 0x1000>;
 
-			/* mmu_dsp cannot be moved before reset driver */
-			status = "disabled";
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
 		};
 	};
 
@@ -420,7 +423,6 @@
 
 		target-module@2d000 {			/* 0x4a0ad000, ap 88 0c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp_usb_phy";
 			reg = <0x2d000 0x4>,
 			      <0x2d010 0x4>,
 			      <0x2d014 0x4>;
@@ -499,7 +501,6 @@
 
 		target-module@59000 {			/* 0x4a0d9000, ap 13 1a.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu";
 			reg = <0x59038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -523,7 +524,6 @@
 
 		target-module@5b000 {			/* 0x4a0db000, ap 15 08.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_iva";
 			reg = <0x5b038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -547,7 +547,6 @@
 
 		target-module@5d000 {			/* 0x4a0dd000, ap 17 22.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
 			reg = <0x5d038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@@ -613,7 +612,6 @@
 
 		target-module@76000 {			/* 0x4a0f6000, ap 29 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0x76000 0x4>,
 			      <0x76010 0x4>,
 			      <0x76014 0x4>;
@@ -721,7 +719,6 @@
 
 		target-module@a000 {			/* 0x4a10a000, ap 65 50.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "fdif";
 			reg = <0xa000 0x4>,
 			      <0xa010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1177,7 +1174,6 @@
 
 		target-module@c000 {			/* 0x4a31c000, ap 11 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "kbd";
 			reg = <0xc000 0x4>,
 			      <0xc010 0x4>,
 			      <0xc014 0x4>;
@@ -1422,7 +1418,6 @@
 
 		target-module@32000 {			/* 0x48032000, ap 5 02.0 */
 			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			ti,hwmods = "timer2";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>,
 			      <0x32014 0x4>;
@@ -1454,7 +1449,6 @@
 
 		target-module@34000 {			/* 0x48034000, ap 7 04.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1482,7 +1476,6 @@
 
 		target-module@36000 {			/* 0x48036000, ap 9 0e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1510,7 +1503,6 @@
 
 		target-module@3e000 {			/* 0x4803e000, ap 11 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1892,7 +1884,6 @@
 
 		target-module@76000 {			/* 0x48076000, ap 39 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "slimbus2";
 			reg = <0x76000 0x4>,
 			      <0x76010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1913,7 +1904,6 @@
 
 		target-module@78000 {			/* 0x48078000, ap 41 1a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x78000 0x4>,
 			      <0x78010 0x4>,
 			      <0x78014 0x4>;
@@ -1942,7 +1932,6 @@
 
 		target-module@86000 {			/* 0x48086000, ap 43 24.0 */
 			compatible = "ti,sysc-omap2-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>,
 			      <0x86014 0x4>;
@@ -1975,7 +1964,6 @@
 
 		target-module@88000 {			/* 0x48088000, ap 45 2e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2002,12 +1990,26 @@
 			};
 		};
 
-		target-module@90000 {			/* 0x48090000, ap 57 2a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		rng_target: target-module@90000 {	/* 0x48090000, ap 57 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_RNG_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
@@ -2171,6 +2173,35 @@
 				 <0x00001000 0x000a5000 0x00001000>;
 		};
 
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi
index 2de8a6b53d..9a87440d0b 100644
--- a/dts/src/arm/omap4.dtsi
+++ b/dts/src/arm/omap4.dtsi
@@ -173,14 +173,6 @@
 			#gpio-cells = <2>;
 		};
 
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-			#iommu-cells = <0>;
-		};
-
 		target-module@52000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			ti,hwmods = "iss";
@@ -206,17 +198,37 @@
 			/* No child device binding, driver in staging */
 		};
 
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
+
 		target-module@4012c000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "slimbus1";
 			reg = <0x4012c000 0x4>,
 			      <0x4012c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -266,40 +278,90 @@
 			hw-caps-temp-alert;
 		};
 
-		aes1: aes@4b501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b501000 0xa0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 111>, <&sdma 110>;
-			dma-names = "tx", "rx";
-		};
-
-		aes2: aes@4b701000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b701000 0xa0>;
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 114>, <&sdma 113>;
-			dma-names = "tx", "rx";
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 111>, <&sdma 110>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 117>, <&sdma 116>;
-			dma-names = "tx", "rx";
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 114>, <&sdma 113>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		sham: sham@4b100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b100000 0x300>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 119>;
-			dma-names = "rx";
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
+			clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 119>;
+				dma-names = "rx";
+			};
 		};
 
 		abb_mpu: regulator-abb-mpu {
diff --git a/dts/src/arm/omap44xx-clocks.dtsi b/dts/src/arm/omap44xx-clocks.dtsi
index e9d9c84606..5328685911 100644
--- a/dts/src/arm/omap44xx-clocks.dtsi
+++ b/dts/src/arm/omap44xx-clocks.dtsi
@@ -1279,13 +1279,18 @@
 		#size-cells = <1>;
 		ranges = <0 0x1400 0x200>;
 
-		l4_per_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
+		l4_per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
 			reg = <0x20 0x144>;
 			#clock-cells = <2>;
 		};
-	};
 
+		l4_secure_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
+	};
 };
 
 &prm {
diff --git a/dts/src/arm/omap5-l4-abe.dtsi b/dts/src/arm/omap5-l4-abe.dtsi
index 23aa90716f..4ec7909df7 100644
--- a/dts/src/arm/omap5-l4-abe.dtsi
+++ b/dts/src/arm/omap5-l4-abe.dtsi
@@ -203,7 +203,6 @@
 
 		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "dmic";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -244,7 +243,6 @@
 
 		mcpdm_module: target-module@32000 {	/* 0x40132000, ap 16 10.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "mcpdm";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>;
 			reg-names = "rev", "sysc";
@@ -279,7 +277,6 @@
 
 		target-module@38000 {			/* 0x40138000, ap 18 12.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x38000 0x4>,
 			      <0x38010 0x4>;
 			reg-names = "rev", "sysc";
@@ -311,7 +308,6 @@
 
 		target-module@3a000 {			/* 0x4013a000, ap 20 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x3a000 0x4>,
 			      <0x3a010 0x4>;
 			reg-names = "rev", "sysc";
@@ -343,7 +339,6 @@
 
 		target-module@3c000 {			/* 0x4013c000, ap 22 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x3c000 0x4>,
 			      <0x3c010 0x4>;
 			reg-names = "rev", "sysc";
@@ -374,7 +369,6 @@
 
 		target-module@3e000 {			/* 0x4013e000, ap 24 18.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/dts/src/arm/omap5-l4.dtsi b/dts/src/arm/omap5-l4.dtsi
index 25aacf1ba7..f68740abb8 100644
--- a/dts/src/arm/omap5-l4.dtsi
+++ b/dts/src/arm/omap5-l4.dtsi
@@ -213,7 +213,6 @@
 
 		target-module@56000 {			/* 0x4a056000, ap 7 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@@ -237,7 +236,7 @@
 			ranges = <0x0 0x56000 0x1000>;
 
 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
@@ -349,7 +348,6 @@
 
 		target-module@66000 {			/* 0x4a066000, ap 23 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmu_dsp";
 			reg = <0x66000 0x4>,
 			      <0x66010 0x4>,
 			      <0x66014 0x4>;
@@ -364,12 +362,18 @@
 			/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
 			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
 			clock-names = "fck";
+			resets = <&prm_dsp 1>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x66000 0x1000>;
 
-			/* mmu_dsp cannot be moved before reset driver */
-			status = "disabled";
+			mmu_dsp: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+			};
 		};
 
 		target-module@70000 {			/* 0x4a070000, ap 79 2e.0 */
@@ -430,7 +434,6 @@
 
 		target-module@0 {			/* 0x4a080000, ap 83 28.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>,
 			      <0x14 0x4>;
@@ -488,7 +491,6 @@
 
 		target-module@10000 {			/* 0x4a090000, ap 89 36.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp3";
 			reg = <0x10000 0x4>,
 			      <0x10010 0x4>,
 			      <0x10014 0x4>;
@@ -627,7 +629,6 @@
 
 		target-module@76000 {			/* 0x4a0f6000, ap 27 0c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0x76000 0x4>,
 			      <0x76010 0x4>,
 			      <0x76014 0x4>;
@@ -1061,7 +1062,6 @@
 
 		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer2";
 			reg = <0x32000 0x4>,
 			      <0x32010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1089,7 +1089,6 @@
 
 		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1117,7 +1116,6 @@
 
 		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1145,7 +1143,6 @@
 
 		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1713,7 +1710,6 @@
 
 		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1742,7 +1738,6 @@
 
 		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1769,12 +1764,26 @@
 			};
 		};
 
-		target-module@90000 {			/* 0x48090000, ap 55 1a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+		rng_target: target-module@90000 {	/* 0x48090000, ap 55 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_RNG_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
@@ -2358,7 +2367,6 @@
 
 		target-module@c000 {			/* 0x4ae1c000, ap 11 1c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "kbd";
 			reg = <0xc000 0x4>,
 			      <0xc010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/dts/src/arm/omap5.dtsi b/dts/src/arm/omap5.dtsi
index 1f6ad1debc..d0ecf54d5a 100644
--- a/dts/src/arm/omap5.dtsi
+++ b/dts/src/arm/omap5.dtsi
@@ -186,21 +186,33 @@
 			#gpio-cells = <2>;
 		};
 
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-			#iommu-cells = <0>;
-		};
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x55082000 0x100>;
+			#size-cells = <1>;
+			#address-cells = <1>;
 
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
+			mmu_ipu: mmu@0 {
+				compatible = "ti,omap4-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
 		dmm@4e000000 {
diff --git a/dts/src/arm/omap54xx-clocks.dtsi b/dts/src/arm/omap54xx-clocks.dtsi
index 4791834dac..42f2c44772 100644
--- a/dts/src/arm/omap54xx-clocks.dtsi
+++ b/dts/src/arm/omap54xx-clocks.dtsi
@@ -1125,11 +1125,17 @@
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x200>;
 
-		l4per_clkctrl: clk@20 {
-			compatible = "ti,clkctrl";
+		l4per_clkctrl: clock@20 {
+			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
 			reg = <0x20 0x15c>;
 			#clock-cells = <2>;
 		};
+
+		l4sec_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			reg = <0x1a0 0x3c>;
+			#clock-cells = <2>;
+		};
 	};
 
 	dss_cm: dss_cm@1400 {
diff --git a/dts/src/arm/qcom-apq8084.dtsi b/dts/src/arm/qcom-apq8084.dtsi
index 0a0fb147eb..fa1852eed3 100644
--- a/dts/src/arm/qcom-apq8084.dtsi
+++ b/dts/src/arm/qcom-apq8084.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-apq8084.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -184,7 +185,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
+		interrupts = <GIC_PPI 7 0xf04>;
 	};
 
 	clocks {
@@ -203,10 +204,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
 
@@ -253,12 +254,13 @@
 
 		tsens: thermal-sensor@fc4a8000 {
 			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a8000 0x2000>;
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
+			#qcom,sensors = <11>;
 			#thermal-sensor-cells = <1>;
 		};
-
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -269,50 +271,50 @@
 
 			frame@f9021000 {
 				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9021000 0x1000>,
 				      <0xf9022000 0x1000>;
 			};
 
 			frame@f9023000 {
 				frame-number = <1>;
-				interrupts = <0 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9023000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9024000 {
 				frame-number = <2>;
-				interrupts = <0 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9024000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9025000 {
 				frame-number = <3>;
-				interrupts = <0 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9025000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9026000 {
 				frame-number = <4>;
-				interrupts = <0 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9026000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9027000 {
 				frame-number = <5>;
-				interrupts = <0 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9027000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9028000 {
 				frame-number = <6>;
-				interrupts = <0 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9028000 0x1000>;
 				status = "disabled";
 			};
@@ -404,13 +406,13 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 208 0>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
-			interrupts = <0 114 0x0>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -420,7 +422,7 @@
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 123 0>, <0 138 0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -433,7 +435,7 @@
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 125 0>, <0 221 0>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -449,7 +451,7 @@
 			      <0xfc4cb000 0x1000>,
 			      <0xfc4ca000 0x1000>;
 			interrupt-names = "periph_irq";
-			interrupts = <0 190 0>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -463,7 +465,7 @@
 		compatible = "qcom,smd";
 
 		rpm {
-			interrupts = <0 168 1>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi
index 8ef26da32f..71bb25a8af 100644
--- a/dts/src/arm/qcom-ipq4019.dtsi
+++ b/dts/src/arm/qcom-ipq4019.dtsi
@@ -102,6 +102,7 @@
 		L2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
 		};
 	};
 
@@ -353,6 +354,12 @@
 			regulator;
 		};
 
+		saw_l2: regulator@b012000 {
+			compatible = "qcom,saw2";
+			reg = <0xb012000 0x1000>;
+			regulator;
+		};
+
 		blsp1_uart1: serial@78af000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78af000 0x200>;
diff --git a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
index 26160c3248..942e3a2cac 100644
--- a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -143,7 +143,7 @@
 				compatible = "smsc,usb3503a";
 				reg = <0x8>;
 				connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
-				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>;
+				intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
 				initial-mode = <1>;
 			};
 		};
diff --git a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts
index 26160394d7..d2d48770ec 100644
--- a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts
+++ b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts
@@ -259,6 +259,25 @@
 		status = "ok";
 	};
 
+	remoteproc@fb21b000 {
+		status = "ok";
+
+		vddmx-supply = <&pm8841_s1>;
+		vddcx-supply = <&pm8841_s2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcnss_pin_a>;
+
+		smd-edge {
+			qcom,remote-pid = <4>;
+			label = "pronto";
+
+			wcnss {
+				status = "ok";
+			};
+		};
+	};
+
 	pinctrl@fd510000 {
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
@@ -287,6 +306,32 @@
 				bias-pull-up;
 			};
 		};
+
+		wcnss_pin_a: wcnss-pin-active {
+			wlan {
+				pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+				function = "wlan";
+
+				drive-strength = <6>;
+				bias-pull-down;
+			};
+
+			bt {
+				pins = "gpio35", "gpio43", "gpio44";
+				function = "bt";
+
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			fm {
+				pins = "gpio41", "gpio42";
+				function = "fm";
+
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+		};
 	};
 
 	sdhci@f9824900 {
diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi
index 9a84eb0cbb..4b161b809d 100644
--- a/dts/src/arm/qcom-msm8974.dtsi
+++ b/dts/src/arm/qcom-msm8974.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/interconnect/qcom,msm8974.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
@@ -20,17 +21,17 @@
 		#size-cells = <1>;
 		ranges;
 
-		mpss@8000000 {
+		mpss_region: mpss@8000000 {
 			reg = <0x08000000 0x5100000>;
 			no-map;
 		};
 
-		mba@d100000 {
+		mba_region: mba@d100000 {
 			reg = <0x0d100000 0x100000>;
 			no-map;
 		};
 
-		reserved@d200000 {
+		wcnss_region: wcnss@d200000 {
 			reg = <0x0d200000 0xa00000>;
 			no-map;
 		};
@@ -61,8 +62,11 @@
 		};
 
 		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
 			reg = <0x0fd80000 0x180000>;
 			no-map;
+
+			qcom,client-id = <1>;
 		};
 	};
 
@@ -356,6 +360,15 @@
 
 		qcom,smem-states = <&adsp_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
+
+		smd-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 8>;
+			qcom,smd-edge = <1>;
+
+			label = "lpass";
+		};
 	};
 
 	smem {
@@ -795,6 +808,119 @@
 			clock-names = "core";
 		};
 
+		remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			cx-supply = <&pm8841_s2>;
+			mss-supply = <&pm8841_s3>;
+			mx-supply = <&pm8841_s1>;
+			pll-supply = <&pm8941_l12>;
+
+			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		pronto: remoteproc@fb21b000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_region>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			vddpx-supply = <&pm8941_s3>;
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			iris {
+				compatible = "qcom,wcn3680";
+
+				clocks = <&rpmcc RPM_SMD_CXO_A2>;
+				clock-names = "xo";
+
+				vddxo-supply = <&pm8941_l6>;
+				vddrfa-supply = <&pm8941_l11>;
+				vddpa-supply = <&pm8941_l19>;
+				vdddig-supply = <&pm8941_s3>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+					status = "disabled";
+
+					qcom,mmio = <&pronto>;
+
+					bt {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
 		msmgpio: pinctrl@fd510000 {
 			compatible = "qcom,msm8974-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -1179,6 +1305,79 @@
 			};
 		};
 
+		ocmem@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl",
+			            "mem";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core",
+			              "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
+			};
+		};
+
+		bimc: interconnect@fc380000 {
+			reg = <0xfc380000 0x6a000>;
+			compatible = "qcom,msm8974-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		snoc: interconnect@fc460000 {
+			reg = <0xfc460000 0x4000>;
+			compatible = "qcom,msm8974-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		pnoc: interconnect@fc468000 {
+			reg = <0xfc468000 0x4000>;
+			compatible = "qcom,msm8974-pnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		ocmemnoc: interconnect@fc470000 {
+			reg = <0xfc470000 0x4000>;
+			compatible = "qcom,msm8974-ocmemnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
+		};
+
+		mmssnoc: interconnect@fc478000 {
+			reg = <0xfc478000 0x4000>;
+			compatible = "qcom,msm8974-mmssnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&mmcc MMSS_S0_AXI_CLK>,
+			         <&mmcc MMSS_S0_AXI_CLK>;
+		};
+
+		cnoc: interconnect@fc480000 {
+			reg = <0xfc480000 0x4000>;
+			compatible = "qcom,msm8974-cnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
 		mdss: mdss@fd900000 {
 			status = "disabled";
 
@@ -1225,6 +1424,9 @@
 				              "core",
 				              "vsync";
 
+				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
+				interconnect-names = "mdp0-mem";
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -1325,20 +1527,6 @@
 	smd {
 		compatible = "qcom,smd";
 
-		adsp {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 8>;
-			qcom,smd-edge = <1>;
-		};
-
-		modem {
-			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 12>;
-			qcom,smd-edge = <0>;
-		};
-
 		rpm {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
diff --git a/dts/src/arm/r7s72100.dtsi b/dts/src/arm/r7s72100.dtsi
index d03dcd919d..75b2796ebf 100644
--- a/dts/src/arm/r7s72100.dtsi
+++ b/dts/src/arm/r7s72100.dtsi
@@ -313,9 +313,9 @@
 		mmcif: mmc@e804c800 {
 			compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif";
 			reg = <0xe804c800 0x80>;
-			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mstp8_clks R7S72100_CLK_MMCIF>;
 			power-domains = <&cpg_clocks>;
 			reg-io-width = <4>;
@@ -326,9 +326,9 @@
 		sdhi0: sd@e804e000 {
 			compatible = "renesas,sdhi-r7s72100";
 			reg = <0xe804e000 0x100>;
-			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
 				 <&mstp12_clks R7S72100_CLK_SDHI01>;
@@ -342,9 +342,9 @@
 		sdhi1: sd@e804e800 {
 			compatible = "renesas,sdhi-r7s72100";
 			reg = <0xe804e800 0x100>;
-			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
 				 <&mstp12_clks R7S72100_CLK_SDHI11>;
diff --git a/dts/src/arm/r8a73a4.dtsi b/dts/src/arm/r8a73a4.dtsi
index dd865f3c2e..a5cd31229f 100644
--- a/dts/src/arm/r8a73a4.dtsi
+++ b/dts/src/arm/r8a73a4.dtsi
@@ -84,27 +84,27 @@
 		dma0: dma-controller@e6700020 {
 			compatible = "renesas,shdma-r8a73a4";
 			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-					GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
diff --git a/dts/src/arm/r8a7740-armadillo800eva.dts b/dts/src/arm/r8a7740-armadillo800eva.dts
index 758360a2ed..d960c2767f 100644
--- a/dts/src/arm/r8a7740-armadillo800eva.dts
+++ b/dts/src/arm/r8a7740-armadillo800eva.dts
@@ -60,8 +60,7 @@
 
 		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
 		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
+		states = <3300000 0>, <1800000 1>;
 
 		enable-active-high;
 	};
diff --git a/dts/src/arm/r8a7740.dtsi b/dts/src/arm/r8a7740.dtsi
index 12ffe73bf2..ebc1ff64f5 100644
--- a/dts/src/arm/r8a7740.dtsi
+++ b/dts/src/arm/r8a7740.dtsi
@@ -102,14 +102,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -124,14 +124,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -146,14 +146,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -168,14 +168,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -198,10 +198,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xfff20000 0x425>;
-		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
 		power-domains = <&pd_a4r>;
 		status = "disabled";
@@ -212,10 +212,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xe6c20000 0x425>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -342,8 +342,8 @@
 	mmcif0: mmc@e6bd0000 {
 		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -352,9 +352,9 @@
 	sdhi0: sd@e6850000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6850000 0x100>;
-		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -365,9 +365,9 @@
 	sdhi1: sd@e6860000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6860000 0x100>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -378,9 +378,9 @@
 	sdhi2: sd@e6870000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6870000 0x100>;
-		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
diff --git a/dts/src/arm/r8a7743.dtsi b/dts/src/arm/r8a7743.dtsi
index de981d629b..1cd19a569b 100644
--- a/dts/src/arm/r8a7743.dtsi
+++ b/dts/src/arm/r8a7743.dtsi
@@ -399,6 +399,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -417,6 +420,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
 		};
 
 		/* The memory map in the User's Manual maps the cores to
@@ -600,8 +606,8 @@
 			compatible = "renesas,r8a7743-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
@@ -614,8 +620,8 @@
 			compatible = "renesas,r8a7743-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
@@ -628,22 +634,22 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -661,22 +667,22 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1366,20 +1372,20 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1397,20 +1403,20 @@
 			compatible = "renesas,dmac-r8a7743",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1461,10 +1467,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1496,10 +1502,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
@@ -1611,13 +1617,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/r8a7744.dtsi b/dts/src/arm/r8a7744.dtsi
index fa74a26210..1c82dd0abd 100644
--- a/dts/src/arm/r8a7744.dtsi
+++ b/dts/src/arm/r8a7744.dtsi
@@ -399,6 +399,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -417,6 +420,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
 		};
 
 		/* The memory map in the User's Manual maps the cores to
@@ -600,8 +606,8 @@
 			compatible = "renesas,r8a7744-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
@@ -614,8 +620,8 @@
 			compatible = "renesas,r8a7744-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
@@ -628,22 +634,22 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -661,22 +667,22 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1366,20 +1372,20 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1397,20 +1403,20 @@
 			compatible = "renesas,dmac-r8a7744",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1461,10 +1467,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1496,10 +1502,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
@@ -1597,13 +1603,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/r8a7745-iwg22d-sodimm.dts b/dts/src/arm/r8a7745-iwg22d-sodimm.dts
index ce6603b099..58d369ad82 100644
--- a/dts/src/arm/r8a7745-iwg22d-sodimm.dts
+++ b/dts/src/arm/r8a7745-iwg22d-sodimm.dts
@@ -76,8 +76,7 @@
 
 		gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
diff --git a/dts/src/arm/r8a7745.dtsi b/dts/src/arm/r8a7745.dtsi
index c53f7ff206..3f88a7e34a 100644
--- a/dts/src/arm/r8a7745.dtsi
+++ b/dts/src/arm/r8a7745.dtsi
@@ -363,6 +363,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -381,6 +384,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
 		};
 		i2c0: i2c@e6508000 {
 			#address-cells = <1>;
@@ -543,8 +549,8 @@
 			compatible = "renesas,r8a7745-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -557,8 +563,8 @@
 			compatible = "renesas,r8a7745-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -571,22 +577,22 @@
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -604,22 +610,22 @@
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1293,20 +1299,20 @@
 			compatible = "renesas,dmac-r8a7745",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1337,10 +1343,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1372,10 +1378,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
diff --git a/dts/src/arm/r8a77470-iwg23s-sbc.dts b/dts/src/arm/r8a77470-iwg23s-sbc.dts
index 450efe9230..8ac61b50ae 100644
--- a/dts/src/arm/r8a77470-iwg23s-sbc.dts
+++ b/dts/src/arm/r8a77470-iwg23s-sbc.dts
@@ -65,8 +65,7 @@
 
 		gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 };
 
diff --git a/dts/src/arm/r8a77470.dtsi b/dts/src/arm/r8a77470.dtsi
index 51806c7f48..6efcef1670 100644
--- a/dts/src/arm/r8a77470.dtsi
+++ b/dts/src/arm/r8a77470.dtsi
@@ -242,6 +242,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -260,6 +263,9 @@
 		icram2:	sram@e6300000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe6300000 0 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x20000>;
 		};
 
 		i2c0: i2c@e6508000 {
@@ -407,8 +413,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -421,8 +427,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -435,8 +441,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a8000 0 0x100>;
-			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 326>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -449,8 +455,8 @@
 			compatible = "renesas,r8a77470-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b8000 0 0x100>;
-			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 327>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
@@ -463,22 +469,22 @@
 			compatible = "renesas,dmac-r8a77470",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -496,22 +502,22 @@
 			compatible = "renesas,dmac-r8a77470",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
diff --git a/dts/src/arm/r8a7778.dtsi b/dts/src/arm/r8a7778.dtsi
index 10d996d294..593c6df903 100644
--- a/dts/src/arm/r8a7778.dtsi
+++ b/dts/src/arm/r8a7778.dtsi
@@ -79,10 +79,10 @@
 			<0xfe780024 4>,
 			<0xfe780044 4>,
 			<0xfe780064 4>;
-		interrupts =   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
@@ -498,14 +498,17 @@
 		audio_clk_a: audio_clk_a {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <0>;
 		};
 		audio_clk_b: audio_clk_b {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <0>;
 		};
 		audio_clk_c: audio_clk_c {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <0>;
 		};
 
 		/* Fixed ratio clocks */
diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts
index c755f0b8fd..d2240b89ee 100644
--- a/dts/src/arm/r8a7779-marzen.dts
+++ b/dts/src/arm/r8a7779-marzen.dts
@@ -48,8 +48,7 @@
 
 		gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	ethernet@18000000 {
diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi
index ebf5b7cfe2..beb9885e6f 100644
--- a/dts/src/arm/r8a7779.dtsi
+++ b/dts/src/arm/r8a7779.dtsi
@@ -68,6 +68,14 @@
 		      <0xf0000100 0x100>;
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
@@ -164,10 +172,10 @@
 			<0xfe780044 4>,
 			<0xfe780064 4>,
 			<0xfe780000 4>;
-		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts
index 6ec2cf7eb3..097fd9317c 100644
--- a/dts/src/arm/r8a7790-lager.dts
+++ b/dts/src/arm/r8a7790-lager.dts
@@ -150,8 +150,7 @@
 
 		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -174,8 +173,7 @@
 
 		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {
diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi
index 5a2747758f..334ba19769 100644
--- a/dts/src/arm/r8a7790.dtsi
+++ b/dts/src/arm/r8a7790.dtsi
@@ -487,6 +487,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -669,8 +672,8 @@
 			compatible = "renesas,r8a7790-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -683,8 +686,8 @@
 			compatible = "renesas,r8a7790-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -697,22 +700,22 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -730,22 +733,22 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1300,20 +1303,20 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1331,20 +1334,20 @@
 			compatible = "renesas,dmac-r8a7790",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1388,10 +1391,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1423,10 +1426,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pci2: pci@ee0d0000 {
@@ -1446,10 +1449,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x20800 0 0 0 0>;
@@ -1614,13 +1617,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/r8a7791-koelsch.dts b/dts/src/arm/r8a7791-koelsch.dts
index af6bd8fcd5..2b096d5e06 100644
--- a/dts/src/arm/r8a7791-koelsch.dts
+++ b/dts/src/arm/r8a7791-koelsch.dts
@@ -193,8 +193,7 @@
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -217,8 +216,7 @@
 
 		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -241,8 +239,7 @@
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {
diff --git a/dts/src/arm/r8a7791-porter.dts b/dts/src/arm/r8a7791-porter.dts
index d6cf16aac1..f9ece7ab20 100644
--- a/dts/src/arm/r8a7791-porter.dts
+++ b/dts/src/arm/r8a7791-porter.dts
@@ -63,8 +63,7 @@
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -85,8 +84,7 @@
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	hdmi-out {
diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi
index 6f87550245..59a55e87fc 100644
--- a/dts/src/arm/r8a7791.dtsi
+++ b/dts/src/arm/r8a7791.dtsi
@@ -420,6 +420,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -618,8 +621,8 @@
 			compatible = "renesas,r8a7791-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -632,8 +635,8 @@
 			compatible = "renesas,r8a7791-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -646,22 +649,22 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -679,22 +682,22 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1338,20 +1341,20 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1369,20 +1372,20 @@
 			compatible = "renesas,dmac-r8a7791",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1426,10 +1429,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1461,10 +1464,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
@@ -1598,13 +1601,13 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-				      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+				     <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi
index c4ea2d6760..39af16caa2 100644
--- a/dts/src/arm/r8a7792.dtsi
+++ b/dts/src/arm/r8a7792.dtsi
@@ -345,6 +345,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -466,22 +469,22 @@
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -499,22 +502,22 @@
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts
index 48fbeb6340..22ca7cd1e7 100644
--- a/dts/src/arm/r8a7793-gose.dts
+++ b/dts/src/arm/r8a7793-gose.dts
@@ -179,8 +179,7 @@
 
 		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -203,8 +202,7 @@
 
 		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -227,8 +225,7 @@
 
 		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	audio_clock: audio_clock {
diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi
index bf05110fac..eef035c4d9 100644
--- a/dts/src/arm/r8a7793.dtsi
+++ b/dts/src/arm/r8a7793.dtsi
@@ -406,6 +406,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -565,22 +568,22 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -598,22 +601,22 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1166,20 +1169,20 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1197,20 +1200,20 @@
 			compatible = "renesas,dmac-r8a7793",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
diff --git a/dts/src/arm/r8a7794-alt.dts b/dts/src/arm/r8a7794-alt.dts
index 1d22fcdc5d..f79fce74cd 100644
--- a/dts/src/arm/r8a7794-alt.dts
+++ b/dts/src/arm/r8a7794-alt.dts
@@ -60,8 +60,7 @@
 
 		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -84,8 +83,7 @@
 
 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	lbsc {
diff --git a/dts/src/arm/r8a7794-silk.dts b/dts/src/arm/r8a7794-silk.dts
index b3177aea45..2c16ad8543 100644
--- a/dts/src/arm/r8a7794-silk.dts
+++ b/dts/src/arm/r8a7794-silk.dts
@@ -126,8 +126,7 @@
 
 		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga-encoder {
diff --git a/dts/src/arm/r8a7794.dtsi b/dts/src/arm/r8a7794.dtsi
index 8d797d3481..05ef79c6ed 100644
--- a/dts/src/arm/r8a7794.dtsi
+++ b/dts/src/arm/r8a7794.dtsi
@@ -351,6 +351,9 @@
 		icram0:	sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
 		};
 
 		icram1:	sram@e63c0000 {
@@ -527,22 +530,22 @@
 			compatible = "renesas,dmac-r8a7794",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x20000>;
-			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -560,22 +563,22 @@
 			compatible = "renesas,dmac-r8a7794",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6720000 0 0x20000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1132,20 +1135,20 @@
 			compatible = "renesas,dmac-r8a7794",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3", "ch4",
 					  "ch5", "ch6", "ch7", "ch8", "ch9",
@@ -1176,10 +1179,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x800 0 0 0 0>;
@@ -1211,10 +1214,10 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-			interrupt-map-mask = <0xff00 0 0 0x7>;
-			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-					 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 			usb@1,0 {
 				reg = <0x10800 0 0 0 0>;
diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi
index c70182c5ae..cf36e25195 100644
--- a/dts/src/arm/rk3036.dtsi
+++ b/dts/src/arm/rk3036.dtsi
@@ -224,7 +224,7 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@10214000 {
+	sdmmc: mmc@10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
 		clock-frequency = <37500000>;
@@ -238,7 +238,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@10218000 {
+	sdio: mmc@10218000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10218000 0x4000>;
 		max-frequency = <37500000>;
@@ -252,7 +252,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@1021c000 {
+	emmc: mmc@1021c000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x1021c000 0x4000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/rk3188-bqedison2qc.dts b/dts/src/arm/rk3188-bqedison2qc.dts
index c8b62bbd6a..ad1afd4030 100644
--- a/dts/src/arm/rk3188-bqedison2qc.dts
+++ b/dts/src/arm/rk3188-bqedison2qc.dts
@@ -466,9 +466,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
 	vmmcq-supply = <&vccio_wl>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio3>;
 		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm/rk322x.dtsi b/dts/src/arm/rk322x.dtsi
index 340ed6ccb0..4e90efdc96 100644
--- a/dts/src/arm/rk322x.dtsi
+++ b/dts/src/arm/rk322x.dtsi
@@ -662,7 +662,7 @@
 		};
 	};
 
-	sdmmc: dwmmc@30000000 {
+	sdmmc: mmc@30000000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30000000 0x4000>;
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -675,7 +675,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@30010000 {
+	sdio: mmc@30010000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30010000 0x4000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -688,7 +688,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@30020000 {
+	emmc: mmc@30020000 {
 		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30020000 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/rk3288-evb.dtsi b/dts/src/arm/rk3288-evb.dtsi
index 2afd686b20..018802df4c 100644
--- a/dts/src/arm/rk3288-evb.dtsi
+++ b/dts/src/arm/rk3288-evb.dtsi
@@ -97,7 +97,7 @@
 	};
 
 	panel: panel {
-		compatible = "lg,lp079qx1-sp0v", "simple-panel";
+		compatible = "lg,lp079qx1-sp0v";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&lcd_cs>;
diff --git a/dts/src/arm/rk3288-tinker.dtsi b/dts/src/arm/rk3288-tinker.dtsi
index 0aeef23ca3..312582c1bd 100644
--- a/dts/src/arm/rk3288-tinker.dtsi
+++ b/dts/src/arm/rk3288-tinker.dtsi
@@ -113,6 +113,17 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&cpu_opp_table {
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1400000>;
+	};
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>;
@@ -175,7 +186,7 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
+				regulator-max-microvolt = <1400000>;
 				regulator-name = "vdd_arm";
 				regulator-ramp-delay = <6000>;
 				regulator-state-mem {
diff --git a/dts/src/arm/rk3288-veyron-brain.dts b/dts/src/arm/rk3288-veyron-brain.dts
index 406146cbff..aa33d09184 100644
--- a/dts/src/arm/rk3288-veyron-brain.dts
+++ b/dts/src/arm/rk3288-veyron-brain.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Brain";
@@ -40,6 +41,14 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
 	hdmi {
 		vcc50_hdmi_en: vcc50-hdmi-en {
 			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi b/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi
new file mode 100644
index 0000000000..a10d25ac8f
--- /dev/null
+++ b/dts/src/arm/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the Broadcom 43450 bluetooth
+ * chip.
+ *
+ * Copyright 2019 Google, Inc
+ */
+
+&uart0 {
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>, <&bt_enable_l>,
+			    <&bt_dev_wake>;
+
+		compatible = "brcm,bcm43540-bt";
+		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		max-speed		= <3000000>;
+		brcm,bt-pcm-int-params	= [01 02 00 01 01];
+	};
+};
diff --git a/dts/src/arm/rk3288-veyron-chromebook.dtsi b/dts/src/arm/rk3288-veyron-chromebook.dtsi
index ffb60f880b..05112c2517 100644
--- a/dts/src/arm/rk3288-veyron-chromebook.dtsi
+++ b/dts/src/arm/rk3288-veyron-chromebook.dtsi
@@ -136,27 +136,6 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Wake only */
-		&suspend_l_wake
-		&bt_dev_wake_awake
-	>;
-	pinctrl-1 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Sleep only */
-		&suspend_l_sleep
-		&bt_dev_wake_sleep
-	>;
-
 	buttons {
 		ap_lid_int_l: ap-lid-int-l {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/dts/src/arm/rk3288-veyron-edp.dtsi b/dts/src/arm/rk3288-veyron-edp.dtsi
index 300a7e32c9..32c0f10765 100644
--- a/dts/src/arm/rk3288-veyron-edp.dtsi
+++ b/dts/src/arm/rk3288-veyron-edp.dtsi
@@ -54,7 +54,7 @@
 	};
 
 	panel: panel {
-		compatible = "innolux,n116bge", "simple-panel";
+		compatible = "innolux,n116bge";
 		status = "okay";
 		power-supply = <&panel_regulator>;
 		backlight = <&backlight>;
diff --git a/dts/src/arm/rk3288-veyron-fievel.dts b/dts/src/arm/rk3288-veyron-fievel.dts
index 9a0f550858..309b122b4d 100644
--- a/dts/src/arm/rk3288-veyron-fievel.dts
+++ b/dts/src/arm/rk3288-veyron-fievel.dts
@@ -18,8 +18,6 @@
 		     "google,veyron-fievel-rev0", "google,veyron-fievel",
 		     "google,veyron", "rockchip,rk3288";
 
-	/delete-node/ bt-activity;
-
 	vccsys: vccsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vccsys";
@@ -215,7 +213,11 @@
 			  "PHY_PMEB",
 
 			  "PHY_INT",
-			  "REC_MODE_L",
+			  /*
+			   * RECOVERY_SW_L is Chrome OS ABI.  Schematics call
+			   * it REC_MODE_L.
+			   */
+			  "RECOVERY_SW_L",
 			  "OTP_OUT",
 			  "",
 			  "USB_OTG_POWER_EN",
@@ -382,7 +384,11 @@
 			  "PWR_LED1",
 			  "TPM_INT_H",
 			  "SPK_ON",
-			  "FW_WP_AP",
+			  /*
+			   * AP_FLASH_WP_L is Chrome OS ABI.  Schematics call
+			   * it FW_WP_AP.
+			   */
+			  "AP_FLASH_WP_L",
 			  "",
 
 			  "CPU_NMI",
diff --git a/dts/src/arm/rk3288-veyron-jaq.dts b/dts/src/arm/rk3288-veyron-jaq.dts
index a4966e505a..171ba6185b 100644
--- a/dts/src/arm/rk3288-veyron-jaq.dts
+++ b/dts/src/arm/rk3288-veyron-jaq.dts
@@ -273,6 +273,28 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/rk3288-veyron-jerry.dts b/dts/src/arm/rk3288-veyron-jerry.dts
index a6ee44f0fe..66f00d2880 100644
--- a/dts/src/arm/rk3288-veyron-jerry.dts
+++ b/dts/src/arm/rk3288-veyron-jerry.dts
@@ -418,6 +418,28 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/rk3288-veyron-mickey.dts b/dts/src/arm/rk3288-veyron-mickey.dts
index 06a6a9554c..ffd1121d19 100644
--- a/dts/src/arm/rk3288-veyron-mickey.dts
+++ b/dts/src/arm/rk3288-veyron-mickey.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Mickey";
@@ -411,6 +412,14 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+	>;
+
 	hdmi {
 		power_hdmi_on: power-hdmi-on {
 			rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/rk3288-veyron-minnie.dts b/dts/src/arm/rk3288-veyron-minnie.dts
index c833716dbe..383fad1a88 100644
--- a/dts/src/arm/rk3288-veyron-minnie.dts
+++ b/dts/src/arm/rk3288-veyron-minnie.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 
 / {
 	model = "Google Minnie";
@@ -70,7 +71,7 @@
 };
 
 &panel {
-	compatible = "auo,b101ean01", "simple-panel";
+	compatible = "auo,b101ean01";
 
 	/delete-node/ panel-timing;
 
@@ -344,6 +345,26 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/rk3288-veyron-pinky.dts b/dts/src/arm/rk3288-veyron-pinky.dts
index f420499f30..71e6629cc2 100644
--- a/dts/src/arm/rk3288-veyron-pinky.dts
+++ b/dts/src/arm/rk3288-veyron-pinky.dts
@@ -64,6 +64,28 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+		&bt_dev_wake_awake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+		&bt_dev_wake_sleep
+	>;
+
 	/delete-node/ lcd;
 
 	backlight {
diff --git a/dts/src/arm/rk3288-veyron-speedy.dts b/dts/src/arm/rk3288-veyron-speedy.dts
index 2f2989bc3f..e354c61a45 100644
--- a/dts/src/arm/rk3288-veyron-speedy.dts
+++ b/dts/src/arm/rk3288-veyron-speedy.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "rk3288-veyron-chromebook.dtsi"
+#include "rk3288-veyron-broadcom-bluetooth.dtsi"
 #include "cros-ec-sbs.dtsi"
 
 / {
@@ -279,6 +280,26 @@
 };
 
 &pinctrl {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Wake only */
+		&suspend_l_wake
+	>;
+	pinctrl-1 = <
+		/* Common for sleep and wake, but no owners */
+		&ddr0_retention
+		&ddrio_pwroff
+		&global_pwroff
+
+		/* Sleep only */
+		&suspend_l_sleep
+	>;
+
 	buck-5v {
 		drv_5v: drv-5v {
 			rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/rk3288-veyron-tiger.dts b/dts/src/arm/rk3288-veyron-tiger.dts
index bebb230e59..069f0c2c1f 100644
--- a/dts/src/arm/rk3288-veyron-tiger.dts
+++ b/dts/src/arm/rk3288-veyron-tiger.dts
@@ -53,7 +53,7 @@
 };
 
 &panel {
-	compatible = "auo,b101ean01", "simple-panel";
+	compatible = "auo,b101ean01";
 
 	/delete-node/ panel-timing;
 
diff --git a/dts/src/arm/rk3288-veyron.dtsi b/dts/src/arm/rk3288-veyron.dtsi
index 7525e3dd1f..54a6838d73 100644
--- a/dts/src/arm/rk3288-veyron.dtsi
+++ b/dts/src/arm/rk3288-veyron.dtsi
@@ -23,30 +23,6 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	bt_activity: bt-activity {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake>;
-
-		/*
-		 * HACK: until we have an LPM driver, we'll use an
-		 * ugly GPIO key to allow Bluetooth to wake from S3.
-		 * This is expected to only be used by BT modules that
-		 * use UART for comms.  For BT modules that talk over
-		 * SDIO we should use a wakeup mechanism related to SDIO.
-		 *
-		 * Use KEY_RESERVED here since that will work as a wakeup but
-		 * doesn't get reported to higher levels (so doesn't confuse
-		 * Chrome).
-		 */
-		bt-wake {
-			label = "BT Wakeup";
-			gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_RESERVED>;
-			wakeup-source;
-		};
-
-	};
 
 	power_button: power-button {
 		compatible = "gpio-keys";
@@ -82,22 +58,17 @@
 		clocks = <&rk808 RK808_CLKOUT1>;
 		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
+		pinctrl-0 = <&wifi_enable_h>;
 
 		/*
-		 * Depending on the actual card populated GPIO4 D4 and D5
+		 * Depending on the actual card populated GPIO4 D4
 		 * correspond to one of these signals on the module:
 		 *
 		 * D4:
 		 * - SDIO_RESET_L_WL_REG_ON
 		 * - PDN (power down when low)
-		 *
-		 * D5:
-		 * - BT_I2S_WS_BT_RFDISABLE_L
-		 * - No connect
 		 */
-		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>,
-			      <&gpio4 RK_PD5 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
 	};
 
 	vcc_5v: vcc-5v {
@@ -481,26 +452,6 @@
 };
 
 &pinctrl {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Wake only */
-		&bt_dev_wake_awake
-	>;
-	pinctrl-1 = <
-		/* Common for sleep and wake, but no owners */
-		&ddr0_retention
-		&ddrio_pwroff
-		&global_pwroff
-
-		/* Sleep only */
-		&bt_dev_wake_sleep
-	>;
-
 	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
 		bias-disable;
 		drive-strength = <8>;
@@ -622,6 +573,10 @@
 		bt_dev_wake_awake: bt-dev-wake-awake {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
 		};
+
+		bt_dev_wake: bt-dev-wake {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	tpm {
diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi
index 415c75f578..9beb662166 100644
--- a/dts/src/arm/rk3288.dtsi
+++ b/dts/src/arm/rk3288.dtsi
@@ -247,7 +247,7 @@
 		ports = <&vopl_out>, <&vopb_out>;
 	};
 
-	sdmmc: dwmmc@ff0c0000 {
+	sdmmc: mmc@ff0c0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
@@ -261,7 +261,7 @@
 		status = "disabled";
 	};
 
-	sdio0: dwmmc@ff0d0000 {
+	sdio0: mmc@ff0d0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
@@ -275,7 +275,7 @@
 		status = "disabled";
 	};
 
-	sdio1: dwmmc@ff0e0000 {
+	sdio1: mmc@ff0e0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>,
@@ -289,7 +289,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff0f0000 {
+	emmc: mmc@ff0f0000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
diff --git a/dts/src/arm/rk3xxx.dtsi b/dts/src/arm/rk3xxx.dtsi
index 97307a405e..241f43e29c 100644
--- a/dts/src/arm/rk3xxx.dtsi
+++ b/dts/src/arm/rk3xxx.dtsi
@@ -231,7 +231,7 @@
 		status = "disabled";
 	};
 
-	mmc0: dwmmc@10214000 {
+	mmc0: mmc@10214000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10214000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -245,7 +245,7 @@
 		status = "disabled";
 	};
 
-	mmc1: dwmmc@10218000 {
+	mmc1: mmc@10218000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x10218000 0x1000>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -259,7 +259,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@1021c000 {
+	emmc: mmc@1021c000 {
 		compatible = "rockchip,rk2928-dw-mshc";
 		reg = <0x1021c000 0x1000>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/rockchip-radxa-dalang-carrier.dtsi b/dts/src/arm/rockchip-radxa-dalang-carrier.dtsi
new file mode 100644
index 0000000000..df3712aedf
--- /dev/null
+++ b/dts/src/arm/rockchip-radxa-dalang-carrier.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/dts/src/arm/rv1108.dtsi b/dts/src/arm/rv1108.dtsi
index 5876690ee0..1fd06e7cb9 100644
--- a/dts/src/arm/rv1108.dtsi
+++ b/dts/src/arm/rv1108.dtsi
@@ -456,7 +456,7 @@
 		#reset-cells = <1>;
 	};
 
-	emmc: dwmmc@30110000 {
+	emmc: mmc@30110000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30110000 0x4000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@30120000 {
+	sdio: mmc@30120000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30120000 0x4000>;
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -480,7 +480,7 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@30130000 {
+	sdmmc: mmc@30130000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30130000 0x4000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/s3c2416-smdk2416.dts b/dts/src/arm/s3c2416-smdk2416.dts
index cb371bf72f..811bfdef4e 100644
--- a/dts/src/arm/s3c2416-smdk2416.dts
+++ b/dts/src/arm/s3c2416-smdk2416.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK2416 board device tree source
+ * Samsung SMDK2416 board device tree source
  *
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
  */
diff --git a/dts/src/arm/s3c6410-smdk6410.dts b/dts/src/arm/s3c6410-smdk6410.dts
index 3bf6c450a2..96267f5f02 100644
--- a/dts/src/arm/s3c6410-smdk6410.dts
+++ b/dts/src/arm/s3c6410-smdk6410.dts
@@ -4,7 +4,7 @@
  *
  * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
- * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Device tree source file for Samsung SMDK6410 board which is based on
  * Samsung's S3C6410 SoC.
  */
 
@@ -16,7 +16,7 @@
 #include "s3c6410.dtsi"
 
 / {
-	model = "SAMSUNG SMDK6410 board based on S3C6410";
+	model = "Samsung SMDK6410 board based on S3C6410";
 	compatible = "samsung,mini6410", "samsung,s3c6410";
 
 	memory@50000000 {
diff --git a/dts/src/arm/sam9x60.dtsi b/dts/src/arm/sam9x60.dtsi
new file mode 100644
index 0000000000..326b39328b
--- /dev/null
+++ b/dts/src/arm/sam9x60.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Microchip SAM9X60 SoC";
+	compatible = "microchip,sam9x60";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	sram: sram@300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x100000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb1: ohci@600000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@700000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00700000 0x100000>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "usb_clk", "ehci_clk";
+			assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "microchip,sam9x60-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			microchip,sfr = <&sfr>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "microchip,sam9x60-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@80000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x80000000 0x300>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@90000000 {
+			compatible = "microchip,sam9x60-sdhci";
+			reg = <0x90000000 0x300>;
+			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+			clock-names = "hclock", "multclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			flx4: flexcom@f0000000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0000000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0000000 0x800>;
+				status = "disabled";
+			};
+
+			flx5: flexcom@f0004000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0004000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0004000 0x800>;
+				status = "disabled";
+			};
+
+			dma0: dma-controller@f0008000 {
+				compatible = "microchip,sam9x60-dma", "atmel,sama5d4-dma";
+				reg = <0xf0008000 0x1000>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				clock-names = "dma_clk";
+			};
+
+			ssc: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			qspi: spi@f0014000 {
+				compatible = "microchip,sam9x60-qspi";
+				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 19>;
+				clock-names = "pclk", "qspick";
+				atmel,pmc = <&pmc>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2s: i2s@f001c000 {
+				compatible = "microchip,sam9x60-i2smcc";
+				reg = <0xf001c000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			flx11: flexcom@f0020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0020000 0x800>;
+				status = "disabled";
+			};
+
+			flx12: flexcom@f0024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf0024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf0024000 0x800>;
+				status = "disabled";
+			};
+
+			pit64b: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
+			sha: sha@f002c000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf002c000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "sha_clk";
+				status = "okay";
+			};
+
+			trng: trng@f0030000 {
+				compatible = "microchip,sam9x60-trng";
+				reg = <0xf0030000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "okay";
+			};
+
+			aes: aes@f0034000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf0034000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				clock-names = "aes_clk";
+				status = "okay";
+			};
+
+			tdes: tdes@f0038000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xf0038000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
+
+			classd: classd@f003c000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xf003c000 0x100>;
+				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			can0: can@f8000000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "microchip,sam9x60-can", "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "microchip,sam9x60-tcb", "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&clk32k 0>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			flx6: flexcom@f8010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8010000 0x800>;
+				status = "disabled";
+			};
+
+			flx7: flexcom@f8014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8014000 0x800>;
+				status = "disabled";
+			};
+
+			flx8: flexcom@f8018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8018000 0x800>;
+				status = "disabled";
+			};
+
+			flx0: flexcom@f801c000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf801c000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf801c000 0x800>;
+				status = "disabled";
+			};
+
+			flx1: flexcom@f8020000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8020000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8020000 0x800>;
+				status = "disabled";
+			};
+
+			flx2: flexcom@f8024000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8024000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8024000 0x800>;
+				status = "disabled";
+			};
+
+			flx3: flexcom@f8028000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8028000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8028000 0x800>;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf802c000 0x1000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,sam9x60-macb", "cdns,macb";
+				reg = <0xf8030000 0x1000>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			pwm0: pwm@f8034000 {
+				compatible = "microchip,sam9x60-pwm";
+				reg = <0xf8034000 0x300>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+				#pwm-cells = <3>;
+				status="disabled";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "microchip,sam9x60-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_GCK 25>, <&clk32k 1>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_MCK>;
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			flx9: flexcom@f8040000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8040000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8040000 0x800>;
+				status = "disabled";
+			};
+
+			flx10: flexcom@f8044000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8044000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8044000 0x800>;
+				status = "disabled";
+			};
+
+			isi: isi@f8048000 {
+				compatible = "microchip,sam9x60-isi", "atmel,at91sam9g45-isi";
+				reg = <0xf8048000 0x100>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "isi_clk";
+				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			adc: adc@f804c000 {
+				compatible = "microchip,sam9x60-adc", "atmel,sama5d2-adc";
+				reg = <0xf804c000 0x100>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8050000 {
+				compatible = "microchip,sam9x60-sfr", "syscon";
+				reg = <0xf8050000 0x100>;
+			};
+
+			matrix: matrix@ffffde00 {
+				compatible = "microchip,sam9x60-matrix", "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x200>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			mpddrc: mpddrc@ffffe800 {
+				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
+				reg = <0xffffe800 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
+			aic: interrupt-controller@fffff100 {
+				compatible = "microchip,sam9x60-aic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0xfffff100 0x100>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				pioA: gpio@fffff400 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <26>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					#gpio-lines = <22>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "microchip,sam9x60-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+				clock-names = "td_slck", "md_slck", "main_xtal";
+			};
+
+			reset_controller: rstc@fffffe00 {
+				compatible = "microchip,sam9x60-rstc";
+				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k 0>;
+			};
+
+			shutdown_controller: shdwc@fffffe10 {
+				compatible = "microchip,sam9x60-shdwc";
+				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+				atmel,wakeup-rtt-timer;
+				status = "disabled";
+			};
+
+			pit: timer@fffffe40 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			};
+
+			clk32k: sckc@fffffe50 {
+				compatible = "microchip,sam9x60-sckc";
+				reg = <0xfffffe50 0x4>;
+				clocks = <&slow_xtal>;
+				#clock-cells = <1>;
+			};
+
+			gpbr: syscon@fffffe60 {
+				compatible = "microchip,sam9x60-gpbr", "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffe60 0x10>;
+			};
+
+			rtc: rtc@fffffea8 {
+				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
+				reg = <0xfffffea8 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi
index 565204816e..2012b7407c 100644
--- a/dts/src/arm/sama5d2.dtsi
+++ b/dts/src/arm/sama5d2.dtsi
@@ -300,6 +300,8 @@
 			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
 			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
 			status = "disabled";
 		};
 
@@ -309,6 +311,8 @@
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
 			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
 			status = "disabled";
 		};
 
@@ -615,6 +619,7 @@
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
 				#pwm-cells = <3>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
 			};
 
 			sfr: sfr@f8030000 {
@@ -884,9 +889,12 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 			};
 
-			secumod@fc040000 {
+			pioBU: secumod@fc040000 {
 				compatible = "atmel,sama5d2-secumod", "syscon";
 				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
 			tdes@fc044000 {
diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi
index f770aace0e..203d40be70 100644
--- a/dts/src/arm/sama5d3.dtsi
+++ b/dts/src/arm/sama5d3.dtsi
@@ -1188,49 +1188,49 @@
 					usart0_clk: usart0_clk {
 						#clock-cells = <0>;
 						reg = <12>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart1_clk: usart1_clk {
 						#clock-cells = <0>;
 						reg = <13>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart2_clk: usart2_clk {
 						#clock-cells = <0>;
 						reg = <14>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					usart3_clk: usart3_clk {
 						#clock-cells = <0>;
 						reg = <15>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					twi0_clk: twi0_clk {
 						reg = <18>;
 						#clock-cells = <0>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi1_clk: twi1_clk {
 						#clock-cells = <0>;
 						reg = <19>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					twi2_clk: twi2_clk {
 						#clock-cells = <0>;
 						reg = <20>;
-						atmel,clk-output-range = <0 16625000>;
+						atmel,clk-output-range = <0 41500000>;
 					};
 
 					mci0_clk: mci0_clk {
@@ -1246,19 +1246,19 @@
 					spi0_clk: spi0_clk {
 						#clock-cells = <0>;
 						reg = <24>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					spi1_clk: spi1_clk {
 						#clock-cells = <0>;
 						reg = <25>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					tcb0_clk: tcb0_clk {
 						#clock-cells = <0>;
 						reg = <26>;
-						atmel,clk-output-range = <0 133000000>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 
 					pwm_clk: pwm_clk {
@@ -1269,7 +1269,7 @@
 					adc_clk: adc_clk {
 						#clock-cells = <0>;
 						reg = <29>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					dma0_clk: dma0_clk {
@@ -1300,13 +1300,13 @@
 					ssc0_clk: ssc0_clk {
 						#clock-cells = <0>;
 						reg = <38>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					ssc1_clk: ssc1_clk {
 						#clock-cells = <0>;
 						reg = <39>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					sha_clk: sha_clk {
diff --git a/dts/src/arm/sama5d3_can.dtsi b/dts/src/arm/sama5d3_can.dtsi
index cf06a018ed..2470dd3fff 100644
--- a/dts/src/arm/sama5d3_can.dtsi
+++ b/dts/src/arm/sama5d3_can.dtsi
@@ -36,13 +36,13 @@
 					can0_clk: can0_clk {
 						#clock-cells = <0>;
 						reg = <40>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git a/dts/src/arm/sama5d3_tcb1.dtsi b/dts/src/arm/sama5d3_tcb1.dtsi
index 1584035daf..215802b8db 100644
--- a/dts/src/arm/sama5d3_tcb1.dtsi
+++ b/dts/src/arm/sama5d3_tcb1.dtsi
@@ -22,6 +22,7 @@
 					tcb1_clk: tcb1_clk {
 						#clock-cells = <0>;
 						reg = <27>;
+						atmel,clk-output-range = <0 166000000>;
 					};
 				};
 			};
diff --git a/dts/src/arm/sama5d3_uart.dtsi b/dts/src/arm/sama5d3_uart.dtsi
index 4316bdbdc2..cb62adbd28 100644
--- a/dts/src/arm/sama5d3_uart.dtsi
+++ b/dts/src/arm/sama5d3_uart.dtsi
@@ -41,13 +41,13 @@
 					uart0_clk: uart0_clk {
 						#clock-cells = <0>;
 						reg = <16>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 
 					uart1_clk: uart1_clk {
 						#clock-cells = <0>;
 						reg = <17>;
-						atmel,clk-output-range = <0 66000000>;
+						atmel,clk-output-range = <0 83000000>;
 					};
 				};
 			};
diff --git a/dts/src/arm/sh73a0.dtsi b/dts/src/arm/sh73a0.dtsi
index 33836990b1..c134154bcc 100644
--- a/dts/src/arm/sh73a0.dtsi
+++ b/dts/src/arm/sh73a0.dtsi
@@ -39,11 +39,18 @@
 		};
 	};
 
+	timer@f0000200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xf0000200 0x100>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&periph_clk>;
+	};
+
 	timer@f0000600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xf0000600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
-		clocks = <&twd_clk>;
+		clocks = <&periph_clk>;
 	};
 
 	gic: interrupt-controller@f0001000 {
@@ -110,14 +117,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -132,14 +139,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -154,14 +161,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -176,14 +183,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -194,10 +201,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6820000 0x425>;
-		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -208,10 +215,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6822000 0x425>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -222,10 +229,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6824000 0x425>;
-		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -236,10 +243,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6826000 0x425>;
-		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -250,10 +257,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6828000 0x425>;
-		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
 		power-domains = <&pd_c5>;
 		status = "disabled";
@@ -262,8 +269,8 @@
 	mmcif: mmc@e6bd0000 {
 		compatible = "renesas,mmcif-sh73a0", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
@@ -317,9 +324,9 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee100000 0x100>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -330,8 +337,8 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee120000 0x100>;
-		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		disable-wp;
@@ -342,8 +349,8 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee140000 0x100>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		disable-wp;
@@ -612,19 +619,25 @@
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extcki_clk: extcki {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
 			clock-frequency = <0>;
 		};
 		fsibck_clk: fsibck {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			/* This value can be overridden by the board. */
 			clock-frequency = <0>;
 		};
 
@@ -812,7 +825,7 @@
 			clock-div = <13>;
 			clock-mult = <1>;
 		};
-		twd_clk: twd {
+		periph_clk: periph {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks SH73A0_CLK_Z>;
 			#clock-cells = <0>;
diff --git a/dts/src/arm/ste-ab8500.dtsi b/dts/src/arm/ste-ab8500.dtsi
index 55fff4d442..14d4d8617d 100644
--- a/dts/src/arm/ste-ab8500.dtsi
+++ b/dts/src/arm/ste-ab8500.dtsi
@@ -6,6 +6,20 @@
 #include <dt-bindings/clock/ste-ab8500.h>
 
 / {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			    <&gpadc 0x03>, /* Main charger voltage */
+			    <&gpadc 0x08>, /* Main battery voltage */
+			    <&gpadc 0x09>, /* VBUS */
+			    <&gpadc 0x0a>, /* Main charger current */
+			    <&gpadc 0x0b>, /* USB charger current */
+			    <&gpadc 0x0c>, /* Backup battery voltage */
+			    <&gpadc 0x0d>, /* Die temperature */
+			    <&gpadc 0x12>; /* Crystal temperature */
+	};
+
 	soc {
 		prcmu@80157000 {
 			ab8500 {
@@ -33,12 +47,84 @@
 					interrupt-names = "60S", "ALARM";
 				};
 
-				ab8500-gpadc {
+				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
 						      39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					main_charger_v: channel@03 {
+						reg = <0x03>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					main_charger_c: channel@0a {
+						reg = <0x0a>;
+					};
+					usb_charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					die_temp: channel@0d {
+						reg = <0x0d>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+					xtal_temp: channel@12 {
+						reg = <0x12>;
+					};
+					vbat_true_meas: channel@13 {
+						reg = <0x13>;
+					};
+					bat_ctrl_and_ibat: channel@1c {
+						reg = <0x1c>;
+					};
+					vbat_meas_and_ibat: channel@1d {
+						reg = <0x1d>;
+					};
+					vbat_true_meas_and_ibat: channel@1e {
+						reg = <0x1e>;
+					};
+					bat_temp_and_ibat: channel@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				ab8500_temp {
+					compatible = "stericsson,abx500-temp";
+					io-channels = <&gpadc 0x06>,
+						      <&gpadc 0x07>;
+					io-channel-name = "aux1", "aux2";
 				};
 
 				ab8500_battery: ab8500_battery {
@@ -49,17 +135,31 @@
 				ab8500_fg {
 					compatible = "stericsson,ab8500-fg";
 					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
 				};
 
 				ab8500_btemp {
 					compatible = "stericsson,ab8500-btemp";
 					battery	   = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							"bat_ctrl";
 				};
 
 				ab8500_charger {
 					compatible	= "stericsson,ab8500-charger";
 					battery		= <&ab8500_battery>;
 					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+					io-channels = <&gpadc 0x03>,
+						      <&gpadc 0x0a>,
+						      <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "main_charger_v",
+							"main_charger_c",
+							"vbus_v",
+							"usb_charger_c";
 				};
 
 				ab8500_chargalg {
diff --git a/dts/src/arm/ste-ab8505.dtsi b/dts/src/arm/ste-ab8505.dtsi
new file mode 100644
index 0000000000..c72aa250bf
--- /dev/null
+++ b/dts/src/arm/ste-ab8505.dtsi
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2012 Linaro Ltd
+ */
+
+#include <dt-bindings/clock/ste-ab8500.h>
+
+/ {
+	/* Essential housekeeping hardware monitors */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&gpadc 0x02>, /* Battery temperature */
+			      <&gpadc 0x08>, /* Main battery voltage */
+			      <&gpadc 0x09>, /* VBUS */
+			      <&gpadc 0x0b>, /* Charger current */
+			      <&gpadc 0x0c>; /* Backup battery voltage */
+	};
+
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				compatible = "stericsson,ab8505";
+				interrupt-parent = <&intc>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
+				ab8505_gpio: ab8505-gpio {
+					compatible = "stericsson,ab8505-gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				gpadc: ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#io-channel-cells = <1>;
+
+					/* GPADC channels */
+					bat_ctrl: channel@01 {
+						reg = <0x01>;
+					};
+					btemp_ball: channel@02 {
+						reg = <0x02>;
+					};
+					acc_detect1: channel@04 {
+						reg = <0x04>;
+					};
+					acc_detect2: channel@05 {
+						reg = <0x05>;
+					};
+					adc_aux1: channel@06 {
+						reg = <0x06>;
+					};
+					adc_aux2: channel@07 {
+						reg = <0x07>;
+					};
+					main_batt_v: channel@08 {
+						reg = <0x08>;
+					};
+					vbus_v: channel@09 {
+						reg = <0x09>;
+					};
+					charger_c: channel@0b {
+						reg = <0x0b>;
+					};
+					bk_bat_v: channel@0c {
+						reg = <0x0c>;
+					};
+					usb_id: channel@0e {
+						reg = <0x0e>;
+					};
+				};
+
+				ab8500_battery: ab8500_battery {
+					status = "disabled";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-fg";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x08>;
+					io-channel-name = "main_bat_v";
+				};
+
+				ab8500_btemp {
+					status = "disabled";
+					compatible = "stericsson,ab8500-btemp";
+					battery = <&ab8500_battery>;
+					io-channels = <&gpadc 0x02>,
+						      <&gpadc 0x01>;
+					io-channel-name = "btemp_ball",
+							  "bat_ctrl";
+				};
+
+				ab8500_charger {
+					status = "disabled";
+					compatible = "stericsson,ab8500-charger";
+					battery = <&ab8500_battery>;
+					vddadc-supply = <&ab8500_ldo_adc_reg>;
+					io-channels = <&gpadc 0x09>,
+						      <&gpadc 0x0b>;
+					io-channel-name = "vbus_v",
+							  "usb_charger_c";
+				};
+
+				ab8500_chargalg {
+					status = "disabled";
+					compatible = "stericsson,ab8500-chargalg";
+					battery = <&ab8500_battery>;
+				};
+
+				ab8500_usb: ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+					clocks = <&prcmu_clk PRCMU_SYSCLK>;
+					clock-names = "sysclk";
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ab8505-regulators {
+					compatible = "stericsson,ab8505-regulator";
+
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4_reg: ab8500_ldo_aux4 {
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5_reg: ab8500_ldo_aux5 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					ab8500_ldo_aux6_reg: ab8500_ldo_aux6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-min-microvolt = <1250000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					// supply for gpadc; ADC LDO
+					ab8500_ldo_adc_reg: ab8500_ldo_adc {
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+					};
+
+					// supply for v-aux8; VAUX8 LDO
+					ab8500_ldo_aux8_reg: ab8500_ldo_aux8 {
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+					};
+				};
+			};
+		};
+
+		sound {
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
+		mcde@a0350000 {
+			vana-supply = <&ab8500_ldo_ana_reg>;
+
+			dsi@a0351000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0352000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+			dsi@a0353000 {
+				vana-supply = <&ab8500_ldo_ana_reg>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/ste-db8500.dtsi b/dts/src/arm/ste-db8500.dtsi
new file mode 100644
index 0000000000..d309fad322
--- /dev/null
+++ b/dts/src/arm/ste-db8500.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <998400 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+};
diff --git a/dts/src/arm/ste-db8520.dtsi b/dts/src/arm/ste-db8520.dtsi
new file mode 100644
index 0000000000..48bd8728ae
--- /dev/null
+++ b/dts/src/arm/ste-db8520.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <1152000 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+};
diff --git a/dts/src/arm/ste-dbx5x0-pinctrl.dtsi b/dts/src/arm/ste-dbx5x0-pinctrl.dtsi
new file mode 100644
index 0000000000..7bf7a2d34c
--- /dev/null
+++ b/dts/src/arm/ste-dbx5x0-pinctrl.dtsi
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Linaro Ltd.
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+&pinctrl {
+	/* Settings for all UART default and sleep states */
+	uart0 {
+		u0_a_1_default: u0_a_1_default {
+			default_mux {
+				function = "u0";
+				groups = "u0_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u0_a_1_sleep: u0_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO1_AJ3"; /* RTS */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins = "GPIO3_AH3"; /* TXD */
+				ste,config = <&slpm_out_wkup_pdis>;
+			};
+		};
+	};
+
+	uart1 {
+		u1rxtx_a_1_default: u1rxtx_a_1_default {
+			default_mux {
+				function = "u1";
+				groups = "u1rxtx_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO4_AH6"; /* RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO5_AG6"; /* TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u1rxtx_a_1_sleep: u1rxtx_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO4_AH6"; /* RXD */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO5_AG6"; /* TXD */
+				ste,config = <&slpm_out_wkup_pdis>;
+			};
+		};
+
+		u1ctsrts_a_1_default: u1ctsrts_a_1_default {
+			default_mux {
+				function = "u1";
+				groups = "u1ctsrts_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO6_AF6"; /* CTS */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO7_AG5"; /* RTS */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u1ctsrts_a_1_sleep: u1ctsrts_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO6_AF6"; /* CTS */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO7_AG5"; /* RTS */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+		};
+	};
+
+	uart2 {
+		u2rxtx_c_1_default: u2rxtx_c_1_default {
+			default_mux {
+				function = "u2";
+				groups = "u2rxtx_c_1";
+			};
+			default_cfg1 {
+				pins = "GPIO29_W2"; /* RXD */
+				ste,config = <&in_pu>;
+			};
+			default_cfg2 {
+				pins = "GPIO30_W3"; /* TXD */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		u2rxtx_c_1_sleep: u2rxtx_c_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO29_W2"; /* RXD */
+				ste,config = <&in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO30_W3"; /* TXD */
+				ste,config = <&out_wkup_pdis>;
+			};
+		};
+	};
+
+	/* Settings for all I2C default and sleep states */
+	i2c0 {
+		i2c0_a_1_default: i2c0_a_1_default {
+			default_mux {
+				function = "i2c0";
+				groups = "i2c0_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c0_a_1_sleep: i2c0_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c1 {
+		i2c1_b_2_default: i2c1_b_2_default {
+			default_mux {
+				function = "i2c1";
+				groups = "i2c1_b_2";
+			};
+			default_cfg1 {
+				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c1_b_2_sleep: i2c1_b_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c2 {
+		i2c2_b_2_default: i2c2_b_2_default {
+			default_mux {
+				function = "i2c2";
+				groups = "i2c2_b_2";
+			};
+			default_cfg1 {
+				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c2_b_2_sleep: i2c2_b_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	i2c3 {
+		i2c3_c_2_default: i2c3_c_2_default {
+			default_mux {
+				function = "i2c3";
+				groups = "i2c3_c_2";
+			};
+			default_cfg1 {
+				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c3_c_2_sleep: i2c3_c_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/*
+	 * Activating I2C4 will conflict with UART1 about the same pins so do not
+	 * enable I2C4 and UART1 at the same time.
+	 */
+	i2c4 {
+		i2c4_b_1_default: i2c4_b_1_default {
+			default_mux {
+				function = "i2c4";
+				groups = "i2c4_b_1";
+			};
+			default_cfg1 {
+				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c4_b_1_sleep: i2c4_b_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/* Settings for all MMC/SD/SDIO default and sleep states */
+	sdi0 {
+		/* This is the external SD card slot, 4 bits wide */
+		mc0_a_1_default: mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				groups = "mc0_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO18_AC2", /* CMDDIR */
+				"GPIO19_AC1", /* DAT0DIR */
+				"GPIO20_AB4"; /* DAT2DIR */
+				ste,config = <&out_hi>;
+			};
+			default_cfg2 {
+				pins = "GPIO22_AA3"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg4 {
+				pins =
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc0_a_1_sleep: mc0_a_1_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO18_AC2", /* CMDDIR */
+				"GPIO19_AC1", /* DAT0DIR */
+				"GPIO20_AB4"; /* DAT2DIR */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO22_AA3", /* FBCLK */
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+		};
+
+		mc0_a_2_default: mc0_a_2_default {
+			default_mux {
+				function = "mc0";
+				groups = "mc0_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO22_AA3"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg2 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc0_a_2_sleep: mc0_a_2_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO22_AA3", /* FBCLK */
+				"GPIO24_AB2", /* CMD */
+				"GPIO25_Y4", /* DAT0 */
+				"GPIO26_Y2", /* DAT1 */
+				"GPIO27_AA2", /* DAT2 */
+				"GPIO28_AA1"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO23_AA4"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi1 {
+		/* This is the WLAN SDIO 4 bits wide */
+		mc1_a_1_default: mc1_a_1_default {
+			default_mux {
+				function = "mc1";
+				groups = "mc1_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO209_AG15"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc1_a_1_sleep: mc1_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO209_AG15", /* FBCLK */
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+
+		mc1_a_2_default: mc1_a_2_default {
+			default_mux {
+				function = "mc1";
+				groups = "mc1_a_2";
+			};
+			default_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc1_a_2_sleep: mc1_a_2_sleep {
+			sleep_cfg1 {
+				pins = "GPIO208_AH16"; /* CLK */
+				ste,config = <&slpm_out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO210_AJ15", /* CMD */
+				"GPIO211_AG14", /* DAT0 */
+				"GPIO212_AF13", /* DAT1 */
+				"GPIO213_AG13", /* DAT2 */
+				"GPIO214_AH15"; /* DAT3 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi2 {
+		/* This is the eMMC 8 bits wide, usually PoP eMMC */
+		mc2_a_1_default: mc2_a_1_default {
+			default_mux {
+				function = "mc2";
+				groups = "mc2_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO129_B4", /* CMD */
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc2_a_1_sleep: mc2_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO128_A5"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO130_C8", /* FBCLK */
+				"GPIO129_B4"; /* CMD */
+				ste,config = <&in_wkup_pdis_en>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO131_A12", /* DAT0 */
+				"GPIO132_C10", /* DAT1 */
+				"GPIO133_B10", /* DAT2 */
+				"GPIO134_B9", /* DAT3 */
+				"GPIO135_A9", /* DAT4 */
+				"GPIO136_C7", /* DAT5 */
+				"GPIO137_A7", /* DAT6 */
+				"GPIO138_C5"; /* DAT7 */
+				ste,config = <&in_wkup_pdis>;
+			};
+		};
+	};
+
+	sdi4 {
+		/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+		mc4_a_1_default: mc4_a_1_default {
+			default_mux {
+				function = "mc4";
+				groups = "mc4_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO203_AE23"; /* CLK */
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins = "GPIO202_AF25"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg3 {
+				pins =
+				"GPIO201_AF24", /* CMD */
+				"GPIO200_AH26", /* DAT0 */
+				"GPIO199_AH23", /* DAT1 */
+				"GPIO198_AG25", /* DAT2 */
+				"GPIO197_AH24", /* DAT3 */
+				"GPIO207_AJ23", /* DAT4 */
+				"GPIO206_AG24", /* DAT5 */
+				"GPIO205_AG23", /* DAT6 */
+				"GPIO204_AF23"; /* DAT7 */
+				ste,config = <&in_pu>;
+			};
+		};
+
+		mc4_a_1_sleep: mc4_a_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO203_AE23"; /* CLK */
+				ste,config = <&out_lo_wkup_pdis>;
+			};
+			sleep_cfg2 {
+				pins =
+				"GPIO202_AF25", /* FBCLK */
+				"GPIO201_AF24", /* CMD */
+				"GPIO200_AH26", /* DAT0 */
+				"GPIO199_AH23", /* DAT1 */
+				"GPIO198_AG25", /* DAT2 */
+				"GPIO197_AH24", /* DAT3 */
+				"GPIO207_AJ23", /* DAT4 */
+				"GPIO206_AG24", /* DAT5 */
+				"GPIO205_AG23", /* DAT6 */
+				"GPIO204_AF23"; /* DAT7 */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+	};
+
+	/*
+	 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+	 * cannot be muxed onto any pins.
+	 */
+	msp0 {
+		msp0txrxtfstck_a_1_default: msp0txrxtfstck_a_1_default {
+			default_msp0_mux {
+				function = "msp0";
+				groups = "msp0txrx_a_1", "msp0tfstck_a_1";
+			};
+			default_msp0_cfg {
+				pins =
+				"GPIO12_AC4", /* TXD */
+				"GPIO15_AC3", /* RXD */
+				"GPIO13_AF3", /* TFS */
+				"GPIO14_AE3"; /* TCK */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	msp1 {
+		msp1txrx_a_1_default: msp1txrx_a_1_default {
+			default_mux {
+				function = "msp1";
+				groups = "msp1txrx_a_1", "msp1_a_1";
+			};
+			default_cfg1 {
+				pins = "GPIO33_AF2";
+				ste,config = <&out_lo>;
+			};
+			default_cfg2 {
+				pins =
+				"GPIO34_AE1",
+				"GPIO35_AE2",
+				"GPIO36_AG2";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	msp2 {
+		msp2_a_1_default: msp2_a_1_default {
+			/* MSP2 usually used for HDMI audio */
+			default_mux {
+				function = "msp2";
+				groups = "msp2_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO193_AH27", /* TXD */
+				"GPIO194_AF27", /* TCK */
+				"GPIO195_AG28"; /* TFS */
+				ste,config = <&in_pd>;
+			};
+			default_cfg2 {
+				pins = "GPIO196_AG26"; /* RXD */
+				ste,config = <&out_lo>;
+			};
+		};
+	};
+
+	musb {
+		usb_a_1_default: usb_a_1_default {
+			default_mux {
+				function = "usb";
+				groups = "usb_a_1";
+			};
+			default_cfg1 {
+				pins =
+				"GPIO256_AF28", /* NXT */
+				"GPIO258_AD29", /* XCLK */
+				"GPIO259_AC29", /* DIR */
+				"GPIO260_AD28", /* DAT7 */
+				"GPIO261_AD26", /* DAT6 */
+				"GPIO262_AE26", /* DAT5 */
+				"GPIO263_AG29", /* DAT4 */
+				"GPIO264_AE27", /* DAT3 */
+				"GPIO265_AD27", /* DAT2 */
+				"GPIO266_AC28", /* DAT1 */
+				"GPIO267_AC27"; /* DAT0 */
+				ste,config = <&in_nopull>;
+			};
+			default_cfg2 {
+				pins = "GPIO257_AE29"; /* STP */
+				ste,config = <&out_hi>;
+			};
+		};
+
+		usb_a_1_sleep: usb_a_1_sleep {
+			sleep_cfg1 {
+				pins =
+				"GPIO256_AF28", /* NXT */
+				"GPIO258_AD29", /* XCLK */
+				"GPIO259_AC29"; /* DIR */
+				ste,config = <&slpm_wkup_pdis_en>;
+			};
+			sleep_cfg2 {
+				pins = "GPIO257_AE29"; /* STP */
+				ste,config = <&slpm_out_hi_wkup_pdis>;
+			};
+			sleep_cfg3 {
+				pins =
+				"GPIO260_AD28", /* DAT7 */
+				"GPIO261_AD26", /* DAT6 */
+				"GPIO262_AE26", /* DAT5 */
+				"GPIO263_AG29", /* DAT4 */
+				"GPIO264_AE27", /* DAT3 */
+				"GPIO265_AD27", /* DAT2 */
+				"GPIO266_AC28", /* DAT1 */
+				"GPIO267_AC27"; /* DAT0 */
+				ste,config = <&slpm_in_wkup_pdis_en>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi
index bda454d121..6671f74c9f 100644
--- a/dts/src/arm/ste-dbx5x0.dtsi
+++ b/dts/src/arm/ste-dbx5x0.dtsi
@@ -14,6 +14,22 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	/* This stablilizes the device enumeration */
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+	};
+
 	chosen {
 	};
 
@@ -36,11 +52,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x300>;
-			/* cpufreq controls */
-			operating-points = <998400 0
-					    800000 0
-					    400000 0
-					    200000 0>;
 			clocks = <&prcmu_clk PRCMU_ARMSS>;
 			clock-names = "cpu";
 			clock-latency = <20000>;
@@ -93,7 +104,7 @@
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "stericsson,db8500";
+		compatible = "stericsson,db8500", "simple-bus";
 		interrupt-parent = <&intc>;
 		ranges;
 
@@ -324,7 +335,7 @@
 		};
 
 		rtc@80154000 {
-			compatible = "arm,rtc-pl031", "arm,primecell";
+			compatible = "arm,pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -638,7 +649,7 @@
 			};
 		};
 
-		i2c@80004000 {
+		i2c0: i2c@80004000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -651,9 +662,11 @@
 			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@80122000 {
+		i2c1: i2c@80122000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -667,9 +680,11 @@
 			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@80128000 {
+		i2c2: i2c@80128000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -683,9 +698,11 @@
 			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@80110000 {
+		i2c3: i2c@80110000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -699,9 +716,11 @@
 			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		i2c@8012a000 {
+		i2c4: i2c@8012a000 {
 			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -715,9 +734,11 @@
 			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80002000 {
+		ssp0: spi@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80002000 0x1000>;
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -729,9 +750,11 @@
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80003000 {
+		ssp1: spi@80003000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80003000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -743,9 +766,11 @@
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@8011a000 {
+		spi0: spi@8011a000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x8011a000 0x1000>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -758,9 +783,11 @@
 			       <&dma 0 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80112000 {
+		spi1: spi@80112000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80112000 0x1000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -773,9 +800,11 @@
 			       <&dma 35 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80111000 {
+		spi2: spi@80111000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80111000 0x1000>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -788,9 +817,11 @@
 			       <&dma 33 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		spi@80129000 {
+		spi3: spi@80129000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x80129000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -803,9 +834,11 @@
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
 		};
 
-		ux500_serial0: uart@80120000 {
+		serial0: uart@80120000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80120000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
@@ -820,7 +853,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial1: uart@80121000 {
+		serial1: uart@80121000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80121000 0x1000>;
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -835,7 +868,7 @@
 			status = "disabled";
 		};
 
-		ux500_serial2: uart@80007000 {
+		serial2: uart@80007000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x80007000 0x1000>;
 			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm/ste-href-ab8505.dtsi b/dts/src/arm/ste-href-ab8505.dtsi
deleted file mode 100644
index 95cf38a008..0000000000
--- a/dts/src/arm/ste-href-ab8505.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Linaro Ltd.
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8505 {
-				ab8505-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio34_default_mode>,
-						    <&gpio50_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi2_default_mode>,
-						    <&modsclsda_default_mode>,
-						    <&resethw_default_mode>,
-						    <&service_default_mode>;
-
-					/*
-					 * Pins 2, 10, 11, 13, 34 and 50
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio2_a_1";
-							};
-							default_cfg {
-								pins = "GPIO2_R5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio10_d_1";
-							};
-							default_cfg {
-								pins = "GPIO10_B16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio11_d_1";
-							};
-							default_cfg {
-								pins = "GPIO11_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio13_d_1";
-							};
-							default_cfg {
-								pins = "GPIO13_D17";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					gpio34 {
-						gpio34_default_mode: gpio34_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio34_a_1";
-							};
-							default_cfg {
-								pins = "GPIO34_H14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio50 {
-						gpio50_default_mode: gpio50_default {
-							default_mux {
-								function = "gpio";
-								groups = "gpio50_d_1";
-							};
-							default_cfg {
-								pins = "GPIO50_L4";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pin 14 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								function = "pwmout";
-								groups = "pwmout1_d_1";
-							};
-							default_cfg {
-								pins = "GPIO14_C16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 2 */
-					adi2 {
-						adi2_default_mode: adi2_default {
-							default_mux {
-								function = "adi2";
-								groups = "adi2_d_1";
-							};
-							default_cfg {
-								pins = "GPIO17_P2",
-									 "GPIO18_N3",
-									 "GPIO19_T1",
-									 "GPIO20_P3";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								function = "modsclsda";
-								groups = "modsclsda_d_1";
-							};
-							default_cfg {
-								pins = "GPIO40_J15",
-									"GPIO41_J14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					resethw {
-						resethw_default_mode: resethw_default {
-							default_mux {
-								function = "resethw";
-								groups = "resethw_d_1";
-							};
-							default_cfg {
-								pins = "GPIO52_D16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					service {
-						service_default_mode: service_default {
-							default_mux {
-								function = "service";
-								groups = "service_d_1";
-							};
-							default_cfg {
-								pins = "GPIO53_D15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								function = "sysclkreq";
-								groups = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								pins = "GPIO1_N4";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								function = "gpio";
-								groups = "gpio1_a_1";
-							};
-							default_cfg {
-								pins = "GPIO1_N4";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								function = "sysclkreq";
-								groups = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								pins = "GPIO3_P5";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								function = "gpio";
-								groups = "gpio3_a_1";
-							};
-							default_cfg {
-								pins = "GPIO3_P5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/dts/src/arm/ste-href-family-pinctrl.dtsi b/dts/src/arm/ste-href-family-pinctrl.dtsi
index 2c382d274f..434fa6baf7 100644
--- a/dts/src/arm/ste-href-family-pinctrl.dtsi
+++ b/dts/src/arm/ste-href-family-pinctrl.dtsi
@@ -3,212 +3,11 @@
  * Copyright 2013 Linaro Ltd.
  */
 
-#include "ste-nomadik-pinctrl.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
 
 / {
 	soc {
 		pinctrl {
-			/* Settings for all UART default and sleep states */
-			uart0 {
-				uart0_default_mode: uart0_default {
-					default_mux {
-						function = "u0";
-						groups = "u0_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart0_sleep_mode: uart0_sleep {
-					sleep_cfg1 {
-						pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						pins = "GPIO1_AJ3"; /* RTS */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-
-					sleep_cfg3 {
-						pins = "GPIO3_AH3"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart1 {
-				uart1_default_mode: uart1_default {
-					default_mux {
-						function = "u1";
-						groups = "u1rxtx_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart1_sleep_mode: uart1_sleep {
-					sleep_cfg1 {
-						pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart2 {
-				uart2_default_mode: uart2_default {
-					default_mux {
-						function = "u2";
-						groups = "u2rxtx_c_1";
-					};
-					default_cfg1 {
-						pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart2_sleep_mode: uart2_sleep {
-					sleep_cfg1 {
-						pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all I2C default and sleep states */
-			i2c0 {
-				i2c0_default_mode: i2c_default {
-					default_mux {
-						function = "i2c0";
-						groups = "i2c0_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c0_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c1 {
-				i2c1_default_mode: i2c_default {
-					default_mux {
-						function = "i2c1";
-						groups = "i2c1_b_2";
-					};
-					default_cfg1 {
-						pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c1_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c2 {
-				i2c2_default_mode: i2c_default {
-					default_mux {
-						function = "i2c2";
-						groups = "i2c2_b_2";
-					};
-					default_cfg1 {
-						pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c2_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c3 {
-				i2c3_default_mode: i2c_default {
-					default_mux {
-						function = "i2c3";
-						groups = "i2c3_c_2";
-					};
-					default_cfg1 {
-						pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c3_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Activating I2C4 will conflict with UART1 about the same pins so do not
-			 * enable I2C4 and UART1 at the same time.
-			 */
-			i2c4 {
-				i2c4_default_mode: i2c_default {
-					default_mux {
-						function = "i2c4";
-						groups = "i2c4_b_1";
-					};
-					default_cfg1 {
-						pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c4_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
 			/* Settings for all SPI default and sleep states */
 			spi2 {
 				spi2_default_mode: spi_default {
@@ -270,335 +69,6 @@
 				};
 			};
 
-			/* Settings for all MMC/SD/SDIO default and sleep states */
-			sdi0 {
-				/* This is the external SD card slot, 4 bits wide */
-				sdi0_default_mode: sdi0_default {
-					default_mux {
-						function = "mc0";
-						groups = "mc0_a_1";
-					};
-					default_cfg1 {
-						pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&out_hi>;
-					};
-					default_cfg2 {
-						pins = "GPIO22_AA3"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg4 {
-						pins =
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi0_sleep_mode: sdi0_sleep {
-					sleep_cfg1 {
-						pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO22_AA3", /* FBCLK */
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi1 {
-				/* This is the WLAN SDIO 4 bits wide */
-				sdi1_default_mode: sdi1_default {
-					default_mux {
-						function = "mc1";
-						groups = "mc1_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins = "GPIO209_AG15"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins =
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi1_sleep_mode: sdi1_sleep {
-					sleep_cfg1 {
-						pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO209_AG15", /* FBCLK */
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi2 {
-				/* This is the eMMC 8 bits wide, usually PoP eMMC */
-				sdi2_default_mode: sdi2_default {
-					default_mux {
-						function = "mc2";
-						groups = "mc2_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins = "GPIO130_C8"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins =
-						"GPIO129_B4", /* CMD */
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi2_sleep_mode: sdi2_sleep {
-					sleep_cfg1 {
-						pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO130_C8", /* FBCLK */
-						"GPIO129_B4"; /* CMD */
-						ste,config = <&in_wkup_pdis_en>;
-					};
-					sleep_cfg3 {
-						pins =
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi4 {
-				/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
-				sdi4_default_mode: sdi4_default {
-					default_mux {
-						function = "mc4";
-						groups = "mc4_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins = "GPIO202_AF25"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						pins =
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi4_sleep_mode: sdi4_sleep {
-					sleep_cfg1 {
-						pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						pins =
-						"GPIO202_AF25", /* FBCLK */
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
-			 * cannot be muxed onto any pins.
-			 */
-			msp0 {
-				msp0_default_mode: msp0_default {
-					default_msp0_mux {
-						function = "msp0";
-						groups = "msp0txrx_a_1", "msp0tfstck_a_1";
-					};
-					default_msp0_cfg {
-						pins =
-						"GPIO12_AC4", /* TXD */
-						"GPIO15_AC3", /* RXD */
-						"GPIO13_AF3", /* TFS */
-						"GPIO14_AE3"; /* TCK */
-						ste,config = <&in_nopull>;
-					};
-				};
-			};
-
-			msp1 {
-				msp1_default_mode: msp1_default {
-					default_mux {
-						function = "msp1";
-						groups = "msp1txrx_a_1", "msp1_a_1";
-					};
-					default_cfg1 {
-						pins = "GPIO33_AF2";
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						pins =
-						"GPIO34_AE1",
-						"GPIO35_AE2",
-						"GPIO36_AG2";
-						ste,config = <&in_nopull>;
-					};
-
-				};
-			};
-
-			msp2 {
-				msp2_default_mode: msp2_default {
-					/* MSP2 usually used for HDMI audio */
-					default_mux {
-						function = "msp2";
-						groups = "msp2_a_1";
-					};
-					default_cfg1 {
-						pins =
-						"GPIO193_AH27", /* TXD */
-						"GPIO194_AF27", /* TCK */
-						"GPIO195_AG28"; /* TFS */
-						ste,config = <&in_pd>;
-					};
-					default_cfg2 {
-						pins = "GPIO196_AG26"; /* RXD */
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-
-
-			musb {
-				musb_default_mode: musb_default {
-					default_mux {
-						function = "usb";
-						groups = "usb_a_1";
-					};
-					default_cfg1 {
-						pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29", /* DIR */
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg2 {
-						pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				musb_sleep_mode: musb_sleep {
-					sleep_cfg1 {
-						pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29"; /* DIR */
-						ste,config = <&slpm_wkup_pdis_en>;
-					};
-					sleep_cfg2 {
-						pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						pins =
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&slpm_in_wkup_pdis_en>;
-					};
-				};
-			};
-
 			mcde {
 				lcd_default_mode: lcd_default {
 					default_mux1 {
diff --git a/dts/src/arm/ste-href-tvk1281618-r2.dtsi b/dts/src/arm/ste-href-tvk1281618-r2.dtsi
new file mode 100644
index 0000000000..e024520f4d
--- /dev/null
+++ b/dts/src/arm/ste-href-tvk1281618-r2.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	soc {
+		i2c@80128000 {
+			lsm303dlh@18 {
+				/* Accelerometer */
+				compatible = "st,lsm303dlh-accel";
+				st,drdy-int-pin = <1>;
+				drive-open-drain;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lsm303dlh@1e {
+				/* Magnetometer */
+				compatible = "st,lsm303dlh-magn";
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				/* INT2 would need to be open drain */
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi@a0351000 {
+				panel {
+					compatible = "samsung,s6d16d0";
+					reg = <0>;
+					vdd1-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/ste-href-tvk1281618-r3.dtsi b/dts/src/arm/ste-href-tvk1281618-r3.dtsi
new file mode 100644
index 0000000000..cb3677f0a1
--- /dev/null
+++ b/dts/src/arm/ste-href-tvk1281618-r3.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the TVK1281618 R2 UIB
+ */
+
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	soc {
+		i2c@80128000 {
+			/* Marked:
+			 * 129
+			 * M35
+			 * L3GD20
+			 */
+			l3gd20@6a {
+				/* Gyroscope */
+				compatible = "st,l3gd20";
+				status = "disabled";
+				st,drdy-int-pin = <1>;
+				drive-open-drain;
+				reg = <0x6a>; // 0x6a or 0x6b
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			/*
+			 * Marked:
+			 * 2122
+			 * C3H
+			 * DQEEE
+			 * LIS3DH?
+			 */
+			lis3dh@18 {
+				/* Accelerometer */
+				compatible = "st,lis3dh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+
+			dsi@a0351000 {
+				panel {
+					compatible = "sony,acx424akp";
+					reg = <0>;
+					vddi-supply = <&ab8500_ldo_aux1_reg>;
+					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/ste-href-tvk1281618.dtsi b/dts/src/arm/ste-href-tvk1281618.dtsi
index 3bafd26b48..e1dbfae225 100644
--- a/dts/src/arm/ste-href-tvk1281618.dtsi
+++ b/dts/src/arm/ste-href-tvk1281618.dtsi
@@ -2,7 +2,7 @@
 /*
  * Copyright 2012 ST-Ericsson AB
  *
- * Device Tree for the TVK1281618 UIB
+ * Device Tree for the TVK1281618 family of UIBs
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -81,62 +81,8 @@
 				};
 			};
 		};
-		/* Sensors mounted on this board variant */
+		/* Sensors mounted on all board variants */
 		i2c@80128000 {
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				drive-open-drain;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
-				/*
-				 * These interrupts cannot be used: the other component
-				 * ST-Micro L3D4200D gyro that is connected to the same lines
-				 * cannot set its DRDY line to open drain, so it cannot be
-				 * shared with other peripherals. The should be defined for
-				 * the falling edge if they could be wired together.
-				 *
-				 * interrupts-extended =
-				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
-				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
-				 */
-			};
-			lsm303dlh@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlh-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				/*
-				 * These interrupts cannot be used: the other component
-				 * ST-Micro L3D4200D gyro that is connected to the same lines
-				 * cannot set its DRDY line to open drain, so it cannot be
-				 * shared with other peripherals. The should be defined for
-				 * the falling edge if they could be wired together.
-				 *
-				 * interrupts-extended =
-				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
-				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
-				 */
-			};
-			lis331dl@1c {
-				/* Accelerometer */
-				compatible = "st,lis331dl-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x1c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
-				interrupt-parent = <&gpio2>;
-				/* INT2 would need to be open drain */
-				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
-					     <19 IRQ_TYPE_EDGE_RISING>;
-			};
 			ak8974@f {
 				/* Magnetometer */
 				compatible = "asahi-kasei,ak8974";
@@ -268,18 +214,5 @@
 				};
 			};
 		};
-
-		mcde@a0350000 {
-			status = "okay";
-
-			dsi@a0351000 {
-				panel {
-					compatible = "samsung,s6d16d0";
-					reg = <0>;
-					vdd1-supply = <&ab8500_ldo_aux1_reg>;
-					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-				};
-			};
-		};
 	};
 };
diff --git a/dts/src/arm/ste-href.dtsi b/dts/src/arm/ste-href.dtsi
index 4f6acbd8c0..33e3b0b3c5 100644
--- a/dts/src/arm/ste-href.dtsi
+++ b/dts/src/arm/ste-href.dtsi
@@ -4,7 +4,6 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
-#include "ste-dbx5x0.dtsi"
 #include "ste-href-family-pinctrl.dtsi"
 
 / {
@@ -16,41 +15,44 @@
 	soc {
 		uart@80120000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
 			status = "okay";
 		};
 
 		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
 		uart@80007000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
 			status = "okay";
 		};
 
 		i2c@80004000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+			status = "okay";
 		};
 
 		i2c@80122000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+			status = "okay";
 		};
 
 		i2c@80128000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+			status = "okay";
 			lp5521@33 {
 				compatible = "national,lp5521";
 				reg = <0x33>;
@@ -96,8 +98,9 @@
 
 		i2c@80110000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+			status = "okay";
 		};
 
 		/* ST6G3244ME level translator for 1.8/2.9 V */
@@ -132,8 +135,8 @@
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -145,8 +148,8 @@
 			bus-width = <4>;
 			non-removable;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -160,8 +163,8 @@
 			non-removable;
 			vmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi2_default_mode>;
-			pinctrl-1 = <&sdi2_sleep_mode>;
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -175,27 +178,27 @@
 			non-removable;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
 
 			status = "okay";
 		};
 
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 			status = "okay";
 		};
 
 		msp1: msp@80124000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
+			pinctrl-0 = <&msp1txrx_a_1_default>;
 			status = "okay";
 		};
 
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
+			pinctrl-0 = <&msp2_a_1_default>;
 		};
 
 		msp3: msp@80125000 {
@@ -209,8 +212,8 @@
 
 				ab8500_usb {
 					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&musb_default_mode>;
-					pinctrl-1 = <&musb_sleep_mode>;
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
 				ab8500-regulators {
@@ -257,6 +260,14 @@
 			};
 		};
 
+		pinctrl {
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					/* Some boards set additional settings here */
+				};
+			};
+		};
+
 		mcde@a0350000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&lcd_default_mode>;
diff --git a/dts/src/arm/ste-href520-tvk.dts b/dts/src/arm/ste-href520-tvk.dts
new file mode 100644
index 0000000000..f8c0c1e6aa
--- /dev/null
+++ b/dts/src/arm/ste-href520-tvk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree for the HREF520 version with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-db8520.dtsi"
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618-r3.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF520 and TVK1281618 UIB";
+	compatible = "st-ericsson,href520", "st-ericsson,u8500";
+
+	soc {
+		vmmci: regulator-gpio {
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/dts/src/arm/ste-hrefprev60-stuib.dts b/dts/src/arm/ste-hrefprev60-stuib.dts
index b78be5f4c2..8ce6b723ab 100644
--- a/dts/src/arm/ste-hrefprev60-stuib.dts
+++ b/dts/src/arm/ste-hrefprev60-stuib.dts
@@ -4,8 +4,7 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-db8500.dtsi"
 #include "ste-hrefprev60.dtsi"
 #include "ste-href-stuib.dtsi"
 
@@ -13,13 +12,6 @@
 	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/dts/src/arm/ste-hrefprev60-tvk.dts b/dts/src/arm/ste-hrefprev60-tvk.dts
index 60eed262d9..142f547552 100644
--- a/dts/src/arm/ste-hrefprev60-tvk.dts
+++ b/dts/src/arm/ste-hrefprev60-tvk.dts
@@ -4,17 +4,11 @@
  */
 
 /dts-v1/;
+#include "ste-db8500.dtsi"
 #include "ste-hrefprev60.dtsi"
-#include "ste-href-tvk1281618.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
 };
diff --git a/dts/src/arm/ste-hrefprev60.dtsi b/dts/src/arm/ste-hrefprev60.dtsi
index a036defdf1..115495de86 100644
--- a/dts/src/arm/ste-hrefprev60.dtsi
+++ b/dts/src/arm/ste-hrefprev60.dtsi
@@ -5,7 +5,6 @@
  * Device Tree for the HREF+ prior to the v60 variant.
  */
 
-#include "ste-dbx5x0.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
@@ -58,6 +57,7 @@
 			 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_hrefprev60_mode>;
+			status = "okay";
 		};
 
 		// External Micro SD slot
diff --git a/dts/src/arm/ste-hrefv60plus-stuib.dts b/dts/src/arm/ste-hrefv60plus-stuib.dts
index 9be513aad5..1316886e6b 100644
--- a/dts/src/arm/ste-hrefv60plus-stuib.dts
+++ b/dts/src/arm/ste-hrefv60plus-stuib.dts
@@ -6,8 +6,7 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-db8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
 #include "ste-href-stuib.dtsi"
 
@@ -15,13 +14,6 @@
 	model = "ST-Ericsson HREF (v60+) and ST UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
 	soc {
 		/* Reset line for the BU21013 touchscreen */
 		i2c@80110000 {
diff --git a/dts/src/arm/ste-hrefv60plus-tvk.dts b/dts/src/arm/ste-hrefv60plus-tvk.dts
index 73ea3100f1..5d4b8245f0 100644
--- a/dts/src/arm/ste-hrefv60plus-tvk.dts
+++ b/dts/src/arm/ste-hrefv60plus-tvk.dts
@@ -6,17 +6,11 @@
  */
 
 /dts-v1/;
+#include "ste-db8500.dtsi"
 #include "ste-hrefv60plus.dtsi"
-#include "ste-href-tvk1281618.dtsi"
+#include "ste-href-tvk1281618-r2.dtsi"
 
 / {
 	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
 };
diff --git a/dts/src/arm/ste-hrefv60plus.dtsi b/dts/src/arm/ste-hrefv60plus.dtsi
index aece8eb292..05b4fbbba5 100644
--- a/dts/src/arm/ste-hrefv60plus.dtsi
+++ b/dts/src/arm/ste-hrefv60plus.dtsi
@@ -3,7 +3,6 @@
  * Copyright 2012 ST-Ericsson AB
  */
 
-#include "ste-dbx5x0.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href.dtsi"
 
diff --git a/dts/src/arm/ste-nomadik-pinctrl.dtsi b/dts/src/arm/ste-nomadik-pinctrl.dtsi
index 5673a1113a..bfdb5d9a01 100644
--- a/dts/src/arm/ste-nomadik-pinctrl.dtsi
+++ b/dts/src/arm/ste-nomadik-pinctrl.dtsi
@@ -25,6 +25,11 @@
 		ste,output = <OUTPUT_LOW>;
 	};
 
+	gpio_in_nopull: gpio_input_nopull {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_NOPULL>;
+	};
+
 	gpio_in_pu: gpio_input_pull_up {
 		ste,gpio = <GPIOMODE_ENABLED>;
 		ste,input = <INPUT_PULLUP>;
diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts
index efbc4467b8..be90e73c92 100644
--- a/dts/src/arm/ste-snowball.dts
+++ b/dts/src/arm/ste-snowball.dts
@@ -4,7 +4,7 @@
  */
 
 /dts-v1/;
-#include "ste-dbx5x0.dtsi"
+#include "ste-db8500.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href-family-pinctrl.dtsi"
 
@@ -12,13 +12,6 @@
 	model = "Calao Systems Snowball platform with device tree";
 	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
-	/* This stablilizes the serial port enumeration */
-	aliases {
-		serial0 = &ux500_serial0;
-		serial1 = &ux500_serial1;
-		serial2 = &ux500_serial2;
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
@@ -156,19 +149,19 @@
 
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
+			pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
 			status = "okay";
 		};
 
 		msp1: msp@80124000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
+			pinctrl-0 = <&msp1txrx_a_1_default>;
 			status = "okay";
 		};
 
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
+			pinctrl-0 = <&msp2_a_1_default>;
 		};
 
 		msp3: msp@80125000 {
@@ -238,8 +231,8 @@
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 			vqmmc-supply = <&vmmci>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
+			pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
 
 			/* GPIO218 MMC_CD */
 			cd-gpios  = <&gpio6 26 GPIO_ACTIVE_LOW>;
@@ -253,8 +246,8 @@
 			max-frequency = <100000000>;
 			bus-width = <4>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
+			pinctrl-0 = <&mc1_a_1_default>;
+			pinctrl-1 = <&mc1_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -263,7 +256,7 @@
 		sdi2_per3@80005000 {
 			arm,primecell-periphid = <0x10480180>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdi2_sleep_mode>;
+			pinctrl-0 = <&mc2_a_1_sleep>;
 
 			status = "okay";
 		};
@@ -276,49 +269,52 @@
 			cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
+			pinctrl-0 = <&mc4_a_1_default>;
+			pinctrl-1 = <&mc4_a_1_sleep>;
 
 			status = "okay";
 		};
 
 		uart@80120000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
 			status = "okay";
 		};
 
 		/* This UART is unused and thus left disabled */
 		uart@80121000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
 		};
 
 		uart@80007000 {
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
 			status = "okay";
 		};
 
 		i2c@80004000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+			status = "okay";
 		};
 
 		i2c@80122000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+			status = "okay";
 		};
 
 		i2c@80128000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+			status = "okay";
 			lsm303dlh@18 {
 				/* Accelerometer */
 				compatible = "st,lsm303dlh-accel";
@@ -367,20 +363,18 @@
 
 		i2c@80110000 {
 			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+			status = "okay";
 		};
 
 		spi@80002000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ssp0_snowball_mode>;
+			status = "okay";
 		};
 
 		prcmu@80157000 {
-			cpufreq {
-				status = "okay";
-			};
-
 			ab8500 {
 				ab8500-gpio {
 					/*
@@ -406,8 +400,8 @@
 
 				ab8500_usb {
 					pinctrl-names = "default", "sleep";
-					pinctrl-0 = <&musb_default_mode>;
-					pinctrl-1 = <&musb_sleep_mode>;
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
 				ext_regulators: ab8500-ext-regulators {
diff --git a/dts/src/arm/ste-ux500-samsung-golden.dts b/dts/src/arm/ste-ux500-samsung-golden.dts
new file mode 100644
index 0000000000..313f0ab168
--- /dev/null
+++ b/dts/src/arm/ste-ux500-samsung-golden.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * Note: This device tree cannot be booted directly with the Samsung bootloader.
+ * You need an intermediate, device-tree compatible bootloader
+ * that locks the L2 cache. Otherwise the kernel will crash after decompression.
+ *
+ * There is a port of (mainline) U-Boot, see
+ * https://wiki.postmarketos.org/wiki/ST-Ericsson_NovaThor_U8500#U-Boot
+ */
+/ {
+	model = "Samsung Galaxy S III mini (GT-I8190)";
+	compatible = "samsung,golden", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	soc {
+		/* External Micro SD card slot */
+		sdi0_per1@80126000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+
+			non-removable;
+			/*
+			 * Unfortunately, there is no way to enable the UHS
+			 * modes due to a limitation of the SD level translator:
+			 * It will either translate to 2.9V or disconnect the
+			 * DATA lines, so switching to 1.8V signal voltage fails.
+			 */
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+		};
+
+		/* WLAN SDIO */
+		sdi1_per2@80118000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			non-removable;
+			cap-sd-highspeed;
+
+			vmmc-supply = <&wl_reg_on>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+
+				/* GPIO216 (WLAN_HOST_WAKE) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default>;
+			};
+		};
+
+		/* eMMC */
+		sdi2_per3@80005000 {
+			status = "okay";
+
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+
+			vmmc-supply = <&vmem_3v3>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+		};
+
+		/* BT UART */
+		uart@80120000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 (BT_VREG_ON) */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* GPIO199 (BT_WAKE) */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* GPIO97 (BT_HOST_WAKE) */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART */
+		uart@80007000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			imu@68 {
+				compatible = "invensense,mpu6050";
+				reg = <0x68>;
+
+				/* GPIO206 (ACC_INT) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					      "-1", "0", "0",
+					       "0", "0", "1";
+
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&imu_default>;
+			};
+		};
+
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			touchscreen@4a {
+				compatible = "atmel,maxtouch";
+				reg = <0x4a>;
+
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						regulator-name = "sensor_3v";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						regulator-name = "vreg_tsp_a3v3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux3 {
+						regulator-name = "vdd_tf_2v91";
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "key_led_3.3v";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "vreg_tsp_1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on; /* FIXME */
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "touch_key_2.2v";
+						regulator-min-microvolt = <2200000>;
+						regulator-max-microvolt = <2200000>;
+					};
+
+					ab8500_ldo_aux8 {
+						regulator-name = "sensor_1v8";
+					};
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		volume-up {
+			label = "Volume Up";
+			/* GPIO67 (VOL_UP) */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			/* GPIO92 (VOL_DOWN) */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		home {
+			label = "Home";
+			/* GPIO91 (HOME_KEY) */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 (MOT_EN) */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	/* External LDO for eMMC */
+	vmem_3v3: regulator-vmem {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		startup-delay-us = <200>;
+
+		/* GPIO223 (MEM_LDO_EN) */
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mem_ldo_default>;
+	};
+
+	/* TI TXS0206-29 level translator for 2.9 V */
+	sd_level_translator: regulator-sd-level-translator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+
+		startup-delay-us = <200>;
+
+		/* GPIO87 (TXS0206-29_EN) */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/*
+	 * WL_REG_ON takes WLAN out of reset and enables the internal regulators.
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the BCM chip is actually connected directly to VBAT.
+	 */
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		startup-delay-us = <100000>;
+
+		/* GPIO215 (WLAN_EN) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default>;
+	};
+};
+
+&pinctrl {
+	gpio-keys {
+		gpio_keys_default: gpio_keys_default {
+			golden_cfg1 {
+				pins = "GPIO67",	/* VOL_UP */
+				       "GPIO91",	/* HOME_KEY */
+				       "GPIO92";	/* VOL_DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+
+	sdi0 {
+		sd_level_translator_default: sd_level_translator_default {
+			golden_cfg1 {
+				pins = "GPIO87_B3";	/* TXS0206-29_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	sdi2 {
+		mem_ldo_default: mem_ldo_default {
+			golden_cfg1 {
+				pins = "GPIO223_AH9";	/* MEM_LDO_EN */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	imu {
+		imu_default: imu_default {
+			golden_cfg1 {
+				pins = "GPIO206_AG24";	/* ACC_INT */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+
+	tsp {
+		tsp_default: tsp_default {
+			golden_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	wlan {
+		wlan_default: wlan_default {
+			golden_cfg1 {
+				pins = "GPIO216_AG12";	/* WLAN_HOST_WAKE */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+
+		wlan_en_default: wlan_en_default {
+			golden_cfg1 {
+				pins = "GPIO215_AH13";	/* WLAN_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+
+	bluetooth {
+		bluetooth_default: bluetooth_default {
+			golden_cfg1 {
+				pins = "GPIO199_AH23",	/* BT_WAKE */
+				       "GPIO222_AJ9";	/* BT_VREG_ON */
+				ste,config = <&gpio_out_lo>;
+			};
+			golden_cfg2 {
+				pins = "GPIO97_D9";	/* BT_HOST_WAKE */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
+	vibrator {
+		vibrator_default: vibrator_default {
+			golden_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			golden_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			golden_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts
index 58288aa53f..c27fa355e5 100644
--- a/dts/src/arm/stm32429i-eval.dts
+++ b/dts/src/arm/stm32429i-eval.dts
@@ -95,6 +95,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_panel: vdd-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		green {
@@ -138,6 +145,7 @@
 
 	panel_rgb: panel-rgb {
 		compatible = "ampire,am-480272h3tmqw-t01h";
+		power-supply = <&vdd_panel>;
 		status = "okay";
 		port {
 			panel_in_rgb: endpoint {
diff --git a/dts/src/arm/stm32f4-pinctrl.dtsi b/dts/src/arm/stm32f4-pinctrl.dtsi
index 35202896c0..392fa143ce 100644
--- a/dts/src/arm/stm32f4-pinctrl.dtsi
+++ b/dts/src/arm/stm32f4-pinctrl.dtsi
@@ -163,7 +163,7 @@
 				st,bank-name = "GPIOK";
 			};
 
-			usart1_pins_a: usart1@0 {
+			usart1_pins_a: usart1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
 					bias-disable;
@@ -176,7 +176,7 @@
 				};
 			};
 
-			usart3_pins_a: usart3@0 {
+			usart3_pins_a: usart3-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
 					bias-disable;
@@ -189,7 +189,7 @@
 				};
 			};
 
-			usbotg_fs_pins_a: usbotg_fs@0 {
+			usbotg_fs_pins_a: usbotg-fs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
 						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -200,7 +200,7 @@
 				};
 			};
 
-			usbotg_fs_pins_b: usbotg_fs@1 {
+			usbotg_fs_pins_b: usbotg-fs-1 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
 						 <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
@@ -211,7 +211,7 @@
 				};
 			};
 
-			usbotg_hs_pins_a: usbotg_hs@0 {
+			usbotg_hs_pins_a: usbotg-hs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
 						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -231,7 +231,7 @@
 				};
 			};
 
-			ethernet_mii: mii@0 {
+			ethernet_mii: mii-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
 						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
@@ -251,13 +251,13 @@
 				};
 			};
 
-			adc3_in8_pin: adc@200 {
+			adc3_in8_pin: adc-200 {
 				pins {
 					pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
 				};
 			};
 
-			pwm1_pins: pwm@1 {
+			pwm1_pins: pwm-1 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
 						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -265,14 +265,14 @@
 				};
 			};
 
-			pwm3_pins: pwm@3 {
+			pwm3_pins: pwm-3 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
 						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
 				};
 			};
 
-			i2c1_pins: i2c1@0 {
+			i2c1_pins: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1_SDA */
 						 <STM32_PINMUX('B', 6, AF4)>; /* I2C1_SCL */
@@ -282,7 +282,7 @@
 				};
 			};
 
-			ltdc_pins: ltdc@0 {
+			ltdc_pins: ltdc-0 {
 				pins {
 					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
 						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -316,7 +316,7 @@
 				};
 			};
 
-			dcmi_pins: dcmi@0 {
+			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
 						 <STM32_PINMUX('B', 7, AF13)>, /* DCMI_VSYNC */
@@ -339,7 +339,7 @@
 				};
 			};
 
-			sdio_pins: sdio_pins@0 {
+			sdio_pins: sdio-pins-0 {
 				pins {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
@@ -352,7 +352,7 @@
 				};
 			};
 
-			sdio_pins_od: sdio_pins_od@0 {
+			sdio_pins_od: sdio-pins-od-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDIO_D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDIO_D1 */
diff --git a/dts/src/arm/stm32f429.dtsi b/dts/src/arm/stm32f429.dtsi
index 5c8a826b31..d7770699fe 100644
--- a/dts/src/arm/stm32f429.dtsi
+++ b/dts/src/arm/stm32f429.dtsi
@@ -80,7 +80,7 @@
 	};
 
 	soc {
-		romem: nvmem@1fff7800 {
+		romem: efuse@1fff7800 {
 			compatible = "st,stm32f4-otp";
 			reg = <0x1fff7800 0x400>;
 			#address-cells = <1>;
@@ -318,7 +318,6 @@
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
 			clocks = <&rcc 1 CLK_RTC>;
-			clock-names = "ck_rtc";
 			assigned-clocks = <&rcc 1 CLK_RTC>;
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
@@ -789,7 +788,6 @@
 		rng: rng@50060800 {
 			compatible = "st,stm32-rng";
 			reg = <0x50060800 0x400>;
-			interrupts = <80>;
 			clocks = <&rcc 0 STM32F4_AHB2_CLOCK(RNG)>;
 
 		};
diff --git a/dts/src/arm/stm32f469-disco.dts b/dts/src/arm/stm32f469-disco.dts
index f3ce477b7b..9397db0c43 100644
--- a/dts/src/arm/stm32f469-disco.dts
+++ b/dts/src/arm/stm32f469-disco.dts
@@ -76,6 +76,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vdd_dsi: vdd-dsi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_dsi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	soc {
 		dma-ranges = <0xc0000000 0x0 0x10000000>;
 	};
@@ -155,6 +162,7 @@
 		compatible = "orisetech,otm8009a";
 		reg = <0>; /* dsi virtual channel (0..3) */
 		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_dsi>;
 		status = "okay";
 
 		port {
diff --git a/dts/src/arm/stm32f7-pinctrl.dtsi b/dts/src/arm/stm32f7-pinctrl.dtsi
index 9314128df1..fe4cfda72a 100644
--- a/dts/src/arm/stm32f7-pinctrl.dtsi
+++ b/dts/src/arm/stm32f7-pinctrl.dtsi
@@ -127,7 +127,7 @@
 				st,bank-name = "GPIOK";
 			};
 
-			cec_pins_a: cec@0 {
+			cec_pins_a: cec-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
 					slew-rate = <0>;
@@ -136,7 +136,7 @@
 				};
 			};
 
-			usart1_pins_a: usart1@0 {
+			usart1_pins_a: usart1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
 					bias-disable;
@@ -149,7 +149,7 @@
 				};
 			};
 
-			usart1_pins_b: usart1@1 {
+			usart1_pins_b: usart1-1 {
 				pins1 {
 					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
 					bias-disable;
@@ -162,7 +162,7 @@
 				};
 			};
 
-			i2c1_pins_b: i2c1@0 {
+			i2c1_pins_b: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
 						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
@@ -172,7 +172,7 @@
 				};
 			};
 
-			usbotg_hs_pins_a: usbotg-hs@0 {
+			usbotg_hs_pins_a: usbotg-hs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
 						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -192,7 +192,7 @@
 				};
 			};
 
-			usbotg_hs_pins_b: usbotg-hs@1 {
+			usbotg_hs_pins_b: usbotg-hs-1 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
 						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
@@ -212,7 +212,7 @@
 				};
 			};
 
-			usbotg_fs_pins_a: usbotg-fs@0 {
+			usbotg_fs_pins_a: usbotg-fs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
 						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
@@ -223,7 +223,7 @@
 				};
 			};
 
-			sdio_pins_a: sdio_pins_a@0 {
+			sdio_pins_a: sdio-pins-a-0 {
 				pins {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -236,7 +236,7 @@
 				};
 			};
 
-			sdio_pins_od_a: sdio_pins_od_a@0 {
+			sdio_pins_od_a: sdio-pins-od-a-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
 						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
@@ -254,7 +254,7 @@
 				};
 			};
 
-			sdio_pins_b: sdio_pins_b@0 {
+			sdio_pins_b: sdio-pins-b-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
 						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
@@ -267,7 +267,7 @@
 				};
 			};
 
-			sdio_pins_od_b: sdio_pins_od_b@0 {
+			sdio_pins_od_b: sdio-pins-od-b-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
 						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
diff --git a/dts/src/arm/stm32f746.dtsi b/dts/src/arm/stm32f746.dtsi
index d26f93f8b9..93c0637967 100644
--- a/dts/src/arm/stm32f746.dtsi
+++ b/dts/src/arm/stm32f746.dtsi
@@ -300,7 +300,6 @@
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
 			clocks = <&rcc 1 CLK_RTC>;
-			clock-names = "ck_rtc";
 			assigned-clocks = <&rcc 1 CLK_RTC>;
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
@@ -587,7 +586,7 @@
 			assigned-clock-rates = <1000000>;
 		};
 
-		dma1: dma@40026000 {
+		dma1: dma-controller@40026000 {
 			compatible = "st,stm32-dma";
 			reg = <0x40026000 0x400>;
 			interrupts = <11>,
@@ -603,7 +602,7 @@
 			status = "disabled";
 		};
 
-		dma2: dma@40026400 {
+		dma2: dma-controller@40026400 {
 			compatible = "st,stm32-dma";
 			reg = <0x40026400 0x400>;
 			interrupts = <56>,
diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi
index c065266ee3..05eb02e6d0 100644
--- a/dts/src/arm/stm32h743.dtsi
+++ b/dts/src/arm/stm32h743.dtsi
@@ -231,7 +231,7 @@
 			status = "disabled";
 		};
 
-		dma1: dma@40020000 {
+		dma1: dma-controller@40020000 {
 			compatible = "st,stm32-dma";
 			reg = <0x40020000 0x400>;
 			interrupts = <11>,
@@ -249,7 +249,7 @@
 			status = "disabled";
 		};
 
-		dma2: dma@40020400 {
+		dma2: dma-controller@40020400 {
 			compatible = "st,stm32-dma";
 			reg = <0x40020400 0x400>;
 			interrupts = <56>,
@@ -329,7 +329,7 @@
 			status = "disabled";
 		};
 
-		mdma1: dma@52000000 {
+		mdma1: dma-controller@52000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x52000000 0x1000>;
 			interrupts = <122>;
diff --git a/dts/src/arm/stm32mp15-pinctrl.dtsi b/dts/src/arm/stm32mp15-pinctrl.dtsi
new file mode 100644
index 0000000000..0237d4ddaa
--- /dev/null
+++ b/dts/src/arm/stm32mp15-pinctrl.dtsi
@@ -0,0 +1,1092 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	adc1_in6_pins_a: adc1-in6 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+		};
+	};
+
+	adc12_ain_pins_a: adc12-ain-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+				 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+				 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+		};
+	};
+
+	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+				 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+		};
+	};
+
+	cec_pins_a: cec-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, AF4)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_pins_sleep_a: cec-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	cec_pins_b: cec-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF5)>;
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	cec_pins_sleep_b: cec-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+		};
+	};
+
+	dac_ch1_pins_a: dac-ch1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+		};
+	};
+
+	dac_ch2_pins_a: dac-ch2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+		};
+	};
+
+	dcmi_pins_a: dcmi-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_a: dcmi-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
+				 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
+				 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+		};
+	};
+
+	ethernet0_rgmii_pins_a: rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
+	fmc_pins_a: fmc-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+				 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+			bias-pull-up;
+		};
+	};
+
+	fmc_sleep_pins_a: fmc-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+				 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+				 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+				 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+				 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+				 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+				 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+				 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+				 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+				 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+		};
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_pins_sleep_a: i2c1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c1_pins_b: i2c1-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_pins_sleep_b: i2c1-3 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c2_pins_a: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_a: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c2_pins_b1: i2c2-2 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_b1: i2c2-3 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_pins_sleep_a: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+		};
+	};
+
+	i2s2_pins_a: i2s2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	i2s2_pins_sleep_a: i2s2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+				 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+		};
+	};
+
+	ltdc_pins_a: ltdc-a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_pins_sleep_a: ltdc-a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	ltdc_pins_b: ltdc-b-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_pins_sleep_b: ltdc-b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
+	m_can1_pins_a: m-can1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_a: m_can1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	pwm1_pins_a: pwm1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_a: pwm1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+		};
+	};
+
+	pwm2_pins_a: pwm2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm2_sleep_pins_a: pwm2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+		};
+	};
+
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+				 <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+		};
+	};
+
+	pwm4_pins_b: pwm4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_b: pwm4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	pwm5_pins_a: pwm5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_a: pwm5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+		};
+	};
+
+	qspi_clk_pins_a: qspi-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+
+	qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+		};
+	};
+
+	qspi_bk1_pins_a: qspi-bk1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_bk2_pins_a: qspi-bk2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+		};
+	};
+
+	sai2a_pins_a: sai2a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_a: sai2a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+				 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+		};
+	};
+
+	sai2b_pins_a: sai2b-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_a: sai2b-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+		};
+	};
+
+	sai2b_pins_b: sai2b-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_b: sai2b-3 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai4a_pins_a: sai4a-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai4a_sleep_pins_a: sai4a-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
+	spdifrx_pins_a: spdifrx-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+			bias-disable;
+		};
+	};
+
+	spdifrx_sleep_pins_a: spdifrx-1 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+		};
+	};
+
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+			bias-disable;
+		};
+	};
+};
+
+&pinctrl_z {
+	i2c2_pins_b2: i2c2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_b2: i2c2-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+		};
+	};
+
+	i2c4_pins_a: i2c4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c4_pins_sleep_a: i2c4-1 {
+		pins {
+			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+		};
+	};
+
+	spi1_pins_a: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+};
diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp151.dtsi
index ed8b258256..fb41d0778b 100644
--- a/dts/src/arm/stm32mp157c.dtsi
+++ b/dts/src/arm/stm32mp151.dtsi
@@ -20,12 +20,6 @@
 			device_type = "cpu";
 			reg = <0>;
 		};
-
-		cpu1: cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
 	};
 
 	psci {
@@ -148,6 +142,11 @@
 				reg = <1>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers3: timer@40001000 {
@@ -177,6 +176,11 @@
 				reg = <2>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers4: timer@40002000 {
@@ -204,6 +208,11 @@
 				reg = <3>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers5: timer@40003000 {
@@ -233,6 +242,11 @@
 				reg = <4>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers6: timer@40004000 {
@@ -589,6 +603,11 @@
 				reg = <0>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		timers8: timer@44001000 {
@@ -620,6 +639,11 @@
 				reg = <7>;
 				status = "disabled";
 			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
 		};
 
 		usart6: serial@44003000 {
@@ -923,33 +947,7 @@
 			};
 		};
 
-		m_can1: can@4400e000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-
-		m_can2: can@4400f000 {
-			compatible = "bosch,m_can";
-			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
-			reg-names = "m_can", "message_ram";
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "int0", "int1";
-			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
-			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
-			status = "disabled";
-		};
-
-		dma1: dma@48000000 {
+		dma1: dma-controller@48000000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48000000 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -966,7 +964,7 @@
 			dma-requests = <8>;
 		};
 
-		dma2: dma@48001000 {
+		dma2: dma-controller@48001000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48001000 0x400>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
@@ -1030,6 +1028,21 @@
 			};
 		};
 
+		sdmmc3: sdmmc@48004000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC3_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC3_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "snps,dwc2";
 			reg = <0x49000000 0x10000>;
@@ -1242,15 +1255,6 @@
 			status = "disabled";
 		};
 
-		cryp1: cryp@54001000 {
-			compatible = "st,stm32mp1-cryp";
-			reg = <0x54001000 0x400>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CRYP1>;
-			resets = <&rcc CRYP1_R>;
-			status = "disabled";
-		};
-
 		hash1: hash@54002000 {
 			compatible = "st,stm32f756-hash";
 			reg = <0x54002000 0x400>;
@@ -1271,7 +1275,7 @@
 			status = "disabled";
 		};
 
-		mdma1: dma@58000000 {
+		mdma1: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
 			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
@@ -1318,13 +1322,29 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "cmd_irq";
+			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: sdmmc@58007000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x58007000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
 		};
 
 		crc1: crc@58009000 {
@@ -1349,16 +1369,15 @@
 			clock-names = "stmmaceth",
 				      "mac-clk-tx",
 				      "mac-clk-rx",
-				      "ethstp",
-				      "syscfg-clk";
+				      "ethstp";
 			clocks = <&rcc ETHMAC>,
 				 <&rcc ETHTX>,
 				 <&rcc ETHRX>,
-				 <&rcc ETHSTP>,
-				 <&rcc SYSCFG>;
+				 <&rcc ETHSTP>;
 			st,syscon = <&syscfg 0x4>;
 			snps,mixed-burst;
 			snps,pbl = <2>;
+			snps,en-tx-lpi-clockgating;
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
@@ -1383,26 +1402,6 @@
 			status = "disabled";
 		};
 
-		gpu: gpu@59000000 {
-			compatible = "vivante,gc";
-			reg = <0x59000000 0x800>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc GPU>, <&rcc GPU_K>;
-			clock-names = "bus" ,"core";
-			resets = <&rcc GPU_R>;
-			status = "disabled";
-		};
-
-		dsi: dsi@5a000000 {
-			compatible = "st,stm32-dsi";
-			reg = <0x5a000000 0x800>;
-			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
-			clock-names = "pclk", "ref", "px_clk";
-			resets = <&rcc DSI_R>;
-			reset-names = "apb";
-			status = "disabled";
-		};
-
 		ltdc: display-controller@5a001000 {
 			compatible = "st,stm32-ltdc";
 			reg = <0x5a001000 0x400>;
@@ -1486,7 +1485,7 @@
 			status = "disabled";
 		};
 
-		bsec: nvmem@5c005000 {
+		bsec: efuse@5c005000 {
 			compatible = "st,stm32mp15-bsec";
 			reg = <0x5c005000 0x400>;
 			#address-cells = <1>;
@@ -1511,12 +1510,170 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pin-controller@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-pinctrl";
+			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+			pins-are-numbered;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@5000b000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x400>;
+				clocks = <&rcc GPIOJ>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@5000c000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa000 0x400>;
+				clocks = <&rcc GPIOK>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pin-controller-z@54004000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp157-z-pinctrl";
+			ranges = <0 0x54004000 0x400>;
+			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioz: gpio@54004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&rcc GPIOZ>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+		};
 	};
 
-	mlahb {
-		compatible = "simple-bus";
+	mlahb: ahb {
+		compatible = "st,mlahb", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		ranges;
 		dma-ranges = <0x00000000 0x38000000 0x10000>,
 			     <0x10000000 0x10000000 0x60000>,
 			     <0x30000000 0x30000000 0x60000>;
diff --git a/dts/src/arm/stm32mp153.dtsi b/dts/src/arm/stm32mp153.dtsi
new file mode 100644
index 0000000000..2d759fc601
--- /dev/null
+++ b/dts/src/arm/stm32mp153.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/dts/src/arm/stm32mp157-pinctrl.dtsi b/dts/src/arm/stm32mp157-pinctrl.dtsi
deleted file mode 100644
index 3d1ecb408b..0000000000
--- a/dts/src/arm/stm32mp157-pinctrl.dtsi
+++ /dev/null
@@ -1,953 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-pinctrl";
-			ranges = <0 0x50002000 0xa400>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-			pins-are-numbered;
-
-			gpioa: gpio@50002000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA>;
-				st,bank-name = "GPIOA";
-				status = "disabled";
-			};
-
-			gpiob: gpio@50003000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOB>;
-				st,bank-name = "GPIOB";
-				status = "disabled";
-			};
-
-			gpioc: gpio@50004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOC>;
-				st,bank-name = "GPIOC";
-				status = "disabled";
-			};
-
-			gpiod: gpio@50005000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x400>;
-				clocks = <&rcc GPIOD>;
-				st,bank-name = "GPIOD";
-				status = "disabled";
-			};
-
-			gpioe: gpio@50006000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x400>;
-				clocks = <&rcc GPIOE>;
-				st,bank-name = "GPIOE";
-				status = "disabled";
-			};
-
-			gpiof: gpio@50007000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x400>;
-				clocks = <&rcc GPIOF>;
-				st,bank-name = "GPIOF";
-				status = "disabled";
-			};
-
-			gpiog: gpio@50008000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x400>;
-				clocks = <&rcc GPIOG>;
-				st,bank-name = "GPIOG";
-				status = "disabled";
-			};
-
-			gpioh: gpio@50009000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x400>;
-				clocks = <&rcc GPIOH>;
-				st,bank-name = "GPIOH";
-				status = "disabled";
-			};
-
-			gpioi: gpio@5000a000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x400>;
-				clocks = <&rcc GPIOI>;
-				st,bank-name = "GPIOI";
-				status = "disabled";
-			};
-
-			gpioj: gpio@5000b000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x9000 0x400>;
-				clocks = <&rcc GPIOJ>;
-				st,bank-name = "GPIOJ";
-				status = "disabled";
-			};
-
-			gpiok: gpio@5000c000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0xa000 0x400>;
-				clocks = <&rcc GPIOK>;
-				st,bank-name = "GPIOK";
-				status = "disabled";
-			};
-
-			adc12_ain_pins_a: adc12-ain-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
-						 <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
-						 <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
-						 <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
-				};
-			};
-
-			adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
-						 <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
-				};
-			};
-
-			cec_pins_a: cec-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 15, AF4)>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			cec_pins_sleep_a: cec-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
-				};
-			};
-
-			cec_pins_b: cec-1 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 6, AF5)>;
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			cec_pins_sleep_b: cec-sleep-1 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
-				};
-			};
-
-			dac_ch1_pins_a: dac-ch1 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
-				};
-			};
-
-			dac_ch2_pins_a: dac-ch2 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
-				};
-			};
-
-			dcmi_pins_a: dcmi-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 8,  AF13)>,/* DCMI_HSYNC */
-						 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
-						 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
-						 <STM32_PINMUX('H', 9,  AF13)>,/* DCMI_D0 */
-						 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
-						 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
-						 <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
-						 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
-						 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
-						 <STM32_PINMUX('B', 8,  AF13)>,/* DCMI_D6 */
-						 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
-						 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
-						 <STM32_PINMUX('H', 7,  AF13)>,/* DCMI_D9 */
-						 <STM32_PINMUX('I', 3,  AF13)>,/* DCMI_D10 */
-						 <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
-					bias-disable;
-				};
-			};
-
-			dcmi_sleep_pins_a: dcmi-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 8,  ANALOG)>,/* DCMI_HSYNC */
-						 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
-						 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
-						 <STM32_PINMUX('H', 9,  ANALOG)>,/* DCMI_D0 */
-						 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
-						 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
-						 <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
-						 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
-						 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
-						 <STM32_PINMUX('B', 8,  ANALOG)>,/* DCMI_D6 */
-						 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
-						 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
-						 <STM32_PINMUX('H', 7,  ANALOG)>,/* DCMI_D9 */
-						 <STM32_PINMUX('I', 3,  ANALOG)>,/* DCMI_D10 */
-						 <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
-				};
-			};
-
-			ethernet0_rgmii_pins_a: rgmii-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-						 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-						 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-						 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-						 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-						 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
-						 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-						 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
-						 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
-						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-						 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-					bias-disable;
-				};
-			};
-
-			ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
-						 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
-						 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
-						 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
-						 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
-						 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
-						 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
-						 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-						 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-						 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
-						 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
-						 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
-						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
-						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
-						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
-				};
-			};
-
-			fmc_pins_a: fmc-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
-						 <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
-						 <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
-						 <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
-						 <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
-						 <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
-						 <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
-						 <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
-						 <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
-						 <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
-						 <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
-						 <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
-						 <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
-					bias-pull-up;
-				};
-			};
-
-			fmc_sleep_pins_a: fmc-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
-						 <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
-						 <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
-						 <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
-						 <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
-						 <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
-						 <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
-						 <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
-						 <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
-						 <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
-						 <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
-						 <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
-						 <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
-						 <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
-				};
-			};
-
-			i2c1_pins_a: i2c1-0 {
-				pins {
-					pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c1_pins_sleep_a: i2c1-1 {
-				pins {
-					pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
-				};
-			};
-
-			i2c1_pins_b: i2c1-2 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c1_pins_sleep_b: i2c1-3 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
-						 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
-				};
-			};
-
-			i2c2_pins_a: i2c2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
-						 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c2_pins_sleep_a: i2c2-1 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
-						 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-				};
-			};
-
-			i2c2_pins_b1: i2c2-2 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c2_pins_sleep_b1: i2c2-3 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
-				};
-			};
-
-			i2c5_pins_a: i2c5-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
-						 <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c5_pins_sleep_a: i2c5-1 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
-						 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
-
-				};
-			};
-
-			i2s2_pins_a: i2s2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
-						 <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
-						 <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			i2s2_pins_sleep_a: i2s2-1 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
-						 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
-						 <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
-				};
-			};
-
-			ltdc_pins_a: ltdc-a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
-						 <STM32_PINMUX('H',  2, AF14)>, /* LCD_R0 */
-						 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
-						 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
-						 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
-						 <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
-						 <STM32_PINMUX('C',  0, AF14)>, /* LCD_R5 */
-						 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
-						 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
-						 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
-						 <STM32_PINMUX('E',  6, AF14)>, /* LCD_G1 */
-						 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
-						 <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
-						 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
-						 <STM32_PINMUX('I',  0, AF14)>, /* LCD_G5 */
-						 <STM32_PINMUX('I',  1, AF14)>, /* LCD_G6 */
-						 <STM32_PINMUX('I',  2, AF14)>, /* LCD_G7 */
-						 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
-						 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
-						 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
-						 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
-						 <STM32_PINMUX('I',  4, AF14)>, /* LCD_B4 */
-						 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
-						 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
-						 <STM32_PINMUX('D',  8, AF14)>; /* LCD_B7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			ltdc_pins_sleep_a: ltdc-a-1 {
-				pins {
-					pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
-						 <STM32_PINMUX('H',  2, ANALOG)>, /* LCD_R0 */
-						 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
-						 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
-						 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
-						 <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
-						 <STM32_PINMUX('C',  0, ANALOG)>, /* LCD_R5 */
-						 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
-						 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
-						 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
-						 <STM32_PINMUX('E',  6, ANALOG)>, /* LCD_G1 */
-						 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
-						 <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
-						 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
-						 <STM32_PINMUX('I',  0, ANALOG)>, /* LCD_G5 */
-						 <STM32_PINMUX('I',  1, ANALOG)>, /* LCD_G6 */
-						 <STM32_PINMUX('I',  2, ANALOG)>, /* LCD_G7 */
-						 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
-						 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
-						 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
-						 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
-						 <STM32_PINMUX('I',  4, ANALOG)>, /* LCD_B4 */
-						 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
-						 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
-						 <STM32_PINMUX('D',  8, ANALOG)>; /* LCD_B7 */
-				};
-			};
-
-			ltdc_pins_b: ltdc-b-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('K',  7, AF14)>, /* LCD_DE */
-						 <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
-						 <STM32_PINMUX('J',  0, AF14)>, /* LCD_R1 */
-						 <STM32_PINMUX('J',  1, AF14)>, /* LCD_R2 */
-						 <STM32_PINMUX('J',  2, AF14)>, /* LCD_R3 */
-						 <STM32_PINMUX('J',  3, AF14)>, /* LCD_R4 */
-						 <STM32_PINMUX('J',  4, AF14)>, /* LCD_R5 */
-						 <STM32_PINMUX('J',  5, AF14)>, /* LCD_R6 */
-						 <STM32_PINMUX('J',  6, AF14)>, /* LCD_R7 */
-						 <STM32_PINMUX('J',  7, AF14)>, /* LCD_G0 */
-						 <STM32_PINMUX('J',  8, AF14)>, /* LCD_G1 */
-						 <STM32_PINMUX('J',  9, AF14)>, /* LCD_G2 */
-						 <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
-						 <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
-						 <STM32_PINMUX('K',  0, AF14)>, /* LCD_G5 */
-						 <STM32_PINMUX('K',  1, AF14)>, /* LCD_G6 */
-						 <STM32_PINMUX('K',  2, AF14)>, /* LCD_G7 */
-						 <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
-						 <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
-						 <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
-						 <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
-						 <STM32_PINMUX('K',  3, AF14)>, /* LCD_B4 */
-						 <STM32_PINMUX('K',  4, AF14)>, /* LCD_B5 */
-						 <STM32_PINMUX('K',  5, AF14)>, /* LCD_B6 */
-						 <STM32_PINMUX('K',  6, AF14)>; /* LCD_B7 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			ltdc_pins_sleep_b: ltdc-b-1 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
-						 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
-						 <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
-						 <STM32_PINMUX('K',  7, ANALOG)>, /* LCD_DE */
-						 <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
-						 <STM32_PINMUX('J',  0, ANALOG)>, /* LCD_R1 */
-						 <STM32_PINMUX('J',  1, ANALOG)>, /* LCD_R2 */
-						 <STM32_PINMUX('J',  2, ANALOG)>, /* LCD_R3 */
-						 <STM32_PINMUX('J',  3, ANALOG)>, /* LCD_R4 */
-						 <STM32_PINMUX('J',  4, ANALOG)>, /* LCD_R5 */
-						 <STM32_PINMUX('J',  5, ANALOG)>, /* LCD_R6 */
-						 <STM32_PINMUX('J',  6, ANALOG)>, /* LCD_R7 */
-						 <STM32_PINMUX('J',  7, ANALOG)>, /* LCD_G0 */
-						 <STM32_PINMUX('J',  8, ANALOG)>, /* LCD_G1 */
-						 <STM32_PINMUX('J',  9, ANALOG)>, /* LCD_G2 */
-						 <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
-						 <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
-						 <STM32_PINMUX('K',  0, ANALOG)>, /* LCD_G5 */
-						 <STM32_PINMUX('K',  1, ANALOG)>, /* LCD_G6 */
-						 <STM32_PINMUX('K',  2, ANALOG)>, /* LCD_G7 */
-						 <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
-						 <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
-						 <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
-						 <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
-						 <STM32_PINMUX('K',  3, ANALOG)>, /* LCD_B4 */
-						 <STM32_PINMUX('K',  4, ANALOG)>, /* LCD_B5 */
-						 <STM32_PINMUX('K',  5, ANALOG)>, /* LCD_B6 */
-						 <STM32_PINMUX('K',  6, ANALOG)>; /* LCD_B7 */
-				};
-			};
-
-			m_can1_pins_a: m-can1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
-					slew-rate = <1>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
-					bias-disable;
-				};
-			};
-
-			m_can1_sleep_pins_a: m_can1-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
-						 <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
-				};
-			};
-
-			pwm2_pins_a: pwm2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
-					bias-pull-down;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-			};
-
-			pwm8_pins_a: pwm8-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
-					bias-pull-down;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-			};
-
-			pwm12_pins_a: pwm12-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
-					bias-pull-down;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-			};
-
-			qspi_clk_pins_a: qspi-clk-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <3>;
-				};
-			};
-
-			qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
-				};
-			};
-
-			qspi_bk1_pins_a: qspi-bk1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
-						 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
-						 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
-						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-					bias-pull-up;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
-						 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
-						 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-						 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-						 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
-				};
-			};
-
-			qspi_bk2_pins_a: qspi-bk2-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
-						 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
-						 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
-						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
-					bias-pull-up;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-			};
-
-			qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
-						 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
-						 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-						 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-						 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
-				};
-			};
-
-			sai2a_pins_a: sai2a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
-						 <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
-						 <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
-						 <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
-					slew-rate = <0>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sai2a_sleep_pins_a: sai2a-1 {
-				pins {
-					pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
-						 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
-						 <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
-						 <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
-				};
-			};
-
-			sai2b_pins_a: sai2b-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
-						 <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
-						 <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
-					slew-rate = <0>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-					bias-disable;
-				};
-			};
-
-			sai2b_sleep_pins_a: sai2b-1 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
-						 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
-						 <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
-						 <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
-				};
-			};
-
-			sai2b_pins_b: sai2b-2 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
-					bias-disable;
-				};
-			};
-
-			sai2b_sleep_pins_b: sai2b-3 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
-				};
-			};
-
-			sai4a_pins_a: sai4a-0 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
-					slew-rate = <0>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sai4a_sleep_pins_a: sai4a-1 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
-				};
-			};
-
-			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-open-drain;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
-				};
-			};
-
-			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
-					bias-pull-up;
-				};
-			};
-
-			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
-						 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
-				};
-			};
-
-			spdifrx_pins_a: spdifrx-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
-					bias-disable;
-				};
-			};
-
-			spdifrx_sleep_pins_a: spdifrx-1 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
-				};
-			};
-
-			uart4_pins_a: uart4-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
-				};
-			};
-
-			uart4_pins_b: uart4-1 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-					bias-disable;
-				};
-			};
-
-			uart7_pins_a: uart7-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-						 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-						 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
-					bias-disable;
-				};
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32mp157-z-pinctrl";
-			ranges = <0 0x54004000 0x400>;
-			pins-are-numbered;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&exti 0x60 0xff>;
-
-			gpioz: gpio@54004000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0 0x400>;
-				clocks = <&rcc GPIOZ>;
-				st,bank-name = "GPIOZ";
-				st,bank-ioport = <11>;
-				status = "disabled";
-			};
-
-			i2c2_pins_b2: i2c2-0 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c2_pins_sleep_b2: i2c2-1 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
-				};
-			};
-
-			i2c4_pins_a: i2c4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
-						 <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			i2c4_pins_sleep_a: i2c4-1 {
-				pins {
-					pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
-						 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
-				};
-			};
-
-			spi1_pins_a: spi1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
-						 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <1>;
-				};
-
-				pins2 {
-					pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
-					bias-disable;
-				};
-			};
-		};
-	};
-};
diff --git a/dts/src/arm/stm32mp157.dtsi b/dts/src/arm/stm32mp157.dtsi
new file mode 100644
index 0000000000..3f0a4a91cc
--- /dev/null
+++ b/dts/src/arm/stm32mp157.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
+
+/ {
+	soc {
+		gpu: gpu@59000000 {
+			compatible = "vivante,gc";
+			reg = <0x59000000 0x800>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc GPU>, <&rcc GPU_K>;
+			clock-names = "bus" ,"core";
+			resets = <&rcc GPU_R>;
+			status = "disabled";
+		};
+
+		dsi: dsi@5a000000 {
+			compatible = "st,stm32-dsi";
+			reg = <0x5a000000 0x800>;
+			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clock-names = "pclk", "ref", "px_clk";
+			resets = <&rcc DSI_R>;
+			reset-names = "apb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/dts/src/arm/stm32mp157a-avenger96.dts b/dts/src/arm/stm32mp157a-avenger96.dts
index 628c74a45a..cbfa407590 100644
--- a/dts/src/arm/stm32mp157a-avenger96.dts
+++ b/dts/src/arm/stm32mp157a-avenger96.dts
@@ -6,8 +6,9 @@
 
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
diff --git a/dts/src/arm/stm32mp157a-dk1.dts b/dts/src/arm/stm32mp157a-dk1.dts
index 984a47cbd1..d03d4cd260 100644
--- a/dts/src/arm/stm32mp157a-dk1.dts
+++ b/dts/src/arm/stm32mp157a-dk1.dts
@@ -6,10 +6,10 @@
 
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -23,494 +23,4 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mcuram2: mcuram2@10000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10000000 0x40000>;
-			no-map;
-		};
-
-		vdev0vring0: vdev0vring0@10040000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10040000 0x1000>;
-			no-map;
-		};
-
-		vdev0vring1: vdev0vring1@10041000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10041000 0x1000>;
-			no-map;
-		};
-
-		vdev0buffer: vdev0buffer@10042000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10042000 0x4000>;
-			no-map;
-		};
-
-		mcuram: mcuram@30000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x30000000 0x40000>;
-			no-map;
-		};
-
-		retram: retram@38000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x38000000 0x10000>;
-			no-map;
-		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
-	};
-
-	led {
-		compatible = "gpio-leds";
-		blue {
-			label = "heartbeat";
-			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "STM32MP1-DK";
-		routing =
-			"Playback" , "MCLK",
-			"Capture" , "MCLK",
-			"MICL" , "Mic Bias";
-		dais = <&sai2a_port &sai2b_port &i2s2_port>;
-		status = "okay";
-	};
-};
-
-&adc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
-	vdd-supply = <&vdd>;
-	vdda-supply = <&vdd>;
-	vref-supply = <&vrefbuf>;
-	status = "disabled";
-	adc1: adc@0 {
-		/*
-		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
-		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
-		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
-		 * Use arbitrary margin here (e.g. 5us).
-		 */
-		st,min-sample-time-nsecs = <5000>;
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 6 13 18 19>;
-		status = "okay";
-	};
-	adc2: adc@100 {
-		/* AIN connector, USB Type-C CC1 & CC2 */
-		st,adc-channels = <0 1 2 6 18 19>;
-		st,min-sample-time-nsecs = <5000>;
-		status = "okay";
-	};
-};
-
-&cec {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cec_pins_b>;
-	pinctrl-1 = <&cec_pins_sleep_b>;
-	status = "okay";
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii-id";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
-};
-
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_pins_sleep_a>;
-	i2c-scl-rising-time-ns = <100>;
-	i2c-scl-falling-time-ns = <7>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	hdmi-transmitter@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-parent = <&gpiog>;
-		#sound-dai-cells = <0>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sii9022_in: endpoint {
-					remote-endpoint = <&ltdc_ep0_out>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-				sii9022_tx_endpoint: endpoint {
-					remote-endpoint = <&i2s2_endpoint>;
-				};
-			};
-		};
-	};
-
-	cs42l51: cs42l51@4a {
-		compatible = "cirrus,cs42l51";
-		reg = <0x4a>;
-		#sound-dai-cells = <0>;
-		VL-supply = <&v3v3>;
-		VD-supply = <&v1v8_audio>;
-		VA-supply = <&v1v8_audio>;
-		VAHP-supply = <&v1v8_audio>;
-		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-		clocks = <&sai2a>;
-		clock-names = "MCLK";
-		status = "okay";
-
-		cs42l51_port: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cs42l51_tx_endpoint: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-
-			cs42l51_rx_endpoint: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-		};
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-			ldo1-supply = <&v3v3>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo6-supply = <&v3v3>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO1 0>;
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO2 0>;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO6 0>;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			 bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-			 };
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-			 };
-
-			 vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge = <1>;
-			 };
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-			power-off-time-sec = <10>;
-			status = "okay";
-		};
-
-		watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-};
-
-&i2s2 {
-	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "i2sclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&i2s2_pins_a>;
-	pinctrl-1 = <&i2s2_pins_sleep_a>;
-	status = "okay";
-
-	i2s2_port: port {
-		i2s2_endpoint: endpoint {
-			remote-endpoint = <&sii9022_tx_endpoint>;
-			format = "i2s";
-			mclk-fs = <256>;
-		};
-	};
-};
-
-&ipcc {
-	status = "okay";
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&ltdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ltdc_pins_a>;
-	pinctrl-1 = <&ltdc_pins_sleep_a>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&sii9022_in>;
-		};
-	};
-};
-
-&m4_rproc {
-	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
-			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
-	interrupt-parent = <&exti>;
-	interrupts = <68 1>;
-	status = "okay";
-};
-
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sai2 {
-	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
-	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
-	status = "okay";
-
-	sai2a: audio-controller@4400b004 {
-		#clock-cells = <0>;
-		dma-names = "tx";
-		clocks = <&rcc SAI2_K>;
-		clock-names = "sai_ck";
-		status = "okay";
-
-		sai2a_port: port {
-			sai2a_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-
-	sai2b: audio-controller@4400b024 {
-		dma-names = "rx";
-		st,sync = <&sai2a 2>;
-		clocks = <&rcc SAI2_K>, <&sai2a>;
-		clock-names = "sai_ck", "MCLK";
-		status = "okay";
-
-		sai2b_port: port {
-			sai2b_endpoint: endpoint {
-				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
-				mclk-fs = <256>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <32>;
-			};
-		};
-	};
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
-	st,neg-edge;
-	bus-width = <4>;
-	vmmc-supply = <&v3v3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&vrefbuf {
-	regulator-min-microvolt = <2500000>;
-	regulator-max-microvolt = <2500000>;
-	vdda-supply = <&vdd>;
-	status = "okay";
 };
diff --git a/dts/src/arm/stm32mp157c-dk2.dts b/dts/src/arm/stm32mp157c-dk2.dts
index d26adcbeba..7985b80967 100644
--- a/dts/src/arm/stm32mp157c-dk2.dts
+++ b/dts/src/arm/stm32mp157c-dk2.dts
@@ -6,11 +6,24 @@
 
 /dts-v1/;
 
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
 
 / {
 	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
 	compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &dsi {
diff --git a/dts/src/arm/stm32mp157c-ed1.dts b/dts/src/arm/stm32mp157c-ed1.dts
index b8cc0fb0ec..1fc43251d6 100644
--- a/dts/src/arm/stm32mp157c-ed1.dts
+++ b/dts/src/arm/stm32mp157c-ed1.dts
@@ -5,8 +5,10 @@
  */
 /dts-v1/;
 
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xaa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
@@ -89,6 +91,22 @@
 	};
 };
 
+&adc {
+	/* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+	pinctrl-0 = <&adc1_in6_pins_a>;
+	pinctrl-names = "default";
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		/* 16.5 ck_cycles sampling time */
+		st,min-sample-time-nsecs = <400>;
+		status = "okay";
+	};
+};
+
 &dac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
@@ -305,6 +323,22 @@
 	status = "okay";
 };
 
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	mmc-ddr-3_3v;
+	status = "okay";
+};
+
 &timers6 {
 	status = "okay";
 	/* spare dmas for other usage */
diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts
index 3789312c85..228e35e168 100644
--- a/dts/src/arm/stm32mp157c-ev1.dts
+++ b/dts/src/arm/stm32mp157c-ev1.dts
@@ -283,6 +283,18 @@
 	};
 };
 
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
 &spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins_a>;
@@ -296,7 +308,8 @@
 	status = "disabled";
 	pwm {
 		pinctrl-0 = <&pwm2_pins_a>;
-		pinctrl-names = "default";
+		pinctrl-1 = <&pwm2_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
 		status = "okay";
 	};
 	timer@1 {
@@ -310,7 +323,8 @@
 	status = "disabled";
 	pwm {
 		pinctrl-0 = <&pwm8_pins_a>;
-		pinctrl-names = "default";
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
 		status = "okay";
 	};
 	timer@7 {
@@ -324,7 +338,8 @@
 	status = "disabled";
 	pwm {
 		pinctrl-0 = <&pwm12_pins_a>;
-		pinctrl-names = "default";
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
 		status = "okay";
 	};
 	timer@11 {
@@ -340,6 +355,7 @@
 &usbotg_hs {
 	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
 	status = "okay";
 };
 
diff --git a/dts/src/arm/stm32mp157xaa-pinctrl.dtsi b/dts/src/arm/stm32mp157xaa-pinctrl.dtsi
deleted file mode 100644
index 875adf5e1e..0000000000
--- a/dts/src/arm/stm32mp157xaa-pinctrl.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AA>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			gpioi: gpio@5000a000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
-
-			gpioj: gpio@5000b000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 144 16>;
-			};
-
-			gpiok: gpio@5000c000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl 0 160 8>;
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			st,package = <STM32MP_PKG_AA>;
-
-			gpioz: gpio@54004000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
-			};
-		};
-	};
-};
diff --git a/dts/src/arm/stm32mp157xab-pinctrl.dtsi b/dts/src/arm/stm32mp157xab-pinctrl.dtsi
deleted file mode 100644
index 961fa12a59..0000000000
--- a/dts/src/arm/stm32mp157xab-pinctrl.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AB>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <6>;
-				gpio-ranges = <&pinctrl 6 86 6>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <10>;
-				gpio-ranges = <&pinctrl 6 102 10>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <2>;
-				gpio-ranges = <&pinctrl 0 112 2>;
-			};
-		};
-	};
-};
diff --git a/dts/src/arm/stm32mp157xac-pinctrl.dtsi b/dts/src/arm/stm32mp157xac-pinctrl.dtsi
deleted file mode 100644
index 26600f188d..0000000000
--- a/dts/src/arm/stm32mp157xac-pinctrl.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AC>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
-
-			gpioi: gpio@5000a000 {
-				status = "okay";
-				ngpios = <12>;
-				gpio-ranges = <&pinctrl 0 128 12>;
-			};
-		};
-
-		pinctrl_z: pin-controller-z@54004000 {
-			st,package = <STM32MP_PKG_AC>;
-
-			gpioz: gpio@54004000 {
-				status = "okay";
-				ngpios = <8>;
-				gpio-ranges = <&pinctrl_z 0 400 8>;
-			};
-		};
-	};
-};
diff --git a/dts/src/arm/stm32mp157xad-pinctrl.dtsi b/dts/src/arm/stm32mp157xad-pinctrl.dtsi
deleted file mode 100644
index 910113f3e6..0000000000
--- a/dts/src/arm/stm32mp157xad-pinctrl.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue@st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
-	soc {
-		pinctrl: pin-controller@50002000 {
-			st,package = <STM32MP_PKG_AD>;
-
-			gpioa: gpio@50002000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
-
-			gpiob: gpio@50003000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
-
-			gpioc: gpio@50004000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
-
-			gpiod: gpio@50005000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
-
-			gpioe: gpio@50006000 {
-				status = "okay";
-				ngpios = <16>;
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
-
-			gpiof: gpio@50007000 {
-				status = "okay";
-				ngpios = <6>;
-				gpio-ranges = <&pinctrl 6 86 6>;
-			};
-
-			gpiog: gpio@50008000 {
-				status = "okay";
-				ngpios = <10>;
-				gpio-ranges = <&pinctrl 6 102 10>;
-			};
-
-			gpioh: gpio@50009000 {
-				status = "okay";
-				ngpios = <2>;
-				gpio-ranges = <&pinctrl 0 112 2>;
-			};
-		};
-	};
-};
diff --git a/dts/src/arm/stm32mp15xc.dtsi b/dts/src/arm/stm32mp15xc.dtsi
new file mode 100644
index 0000000000..b06a55a2fa
--- /dev/null
+++ b/dts/src/arm/stm32mp15xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp1: cryp@54001000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54001000 0x400>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/dts/src/arm/stm32mp15xx-dkx.dtsi b/dts/src/arm/stm32mp15xx-dkx.dtsi
new file mode 100644
index 0000000000..f6672e87ae
--- /dev/null
+++ b/dts/src/arm/stm32mp15xx-dkx.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@d4000000 {
+			reg = <0xd4000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		blue {
+			label = "heartbeat";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-DK";
+		routing =
+			"Playback" , "MCLK",
+			"Capture" , "MCLK",
+			"MICL" , "Mic Bias";
+		dais = <&sai2a_port &sai2b_port &i2s2_port>;
+		status = "okay";
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "disabled";
+	adc1: adc@0 {
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		st,min-sample-time-nsecs = <5000>;
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 6 13 18 19>;
+		status = "okay";
+	};
+	adc2: adc@100 {
+		/* AIN connector, USB Type-C CC1 & CC2 */
+		st,adc-channels = <0 1 2 6 18 19>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cec_pins_b>;
+	pinctrl-1 = <&cec_pins_sleep_b>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii-id";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	hdmi-transmitter@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
+		reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sii9022_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				sii9022_tx_endpoint: endpoint {
+					remote-endpoint = <&i2s2_endpoint>;
+				};
+			};
+		};
+	};
+
+	cs42l51: cs42l51@4a {
+		compatible = "cirrus,cs42l51";
+		reg = <0x4a>;
+		#sound-dai-cells = <0>;
+		VL-supply = <&v3v3>;
+		VD-supply = <&v1v8_audio>;
+		VA-supply = <&v1v8_audio>;
+		VAHP-supply = <&v1v8_audio>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		clocks = <&sai2a>;
+		clock-names = "MCLK";
+		status = "okay";
+
+		cs42l51_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cs42l51_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			cs42l51_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2s2 {
+	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "i2sclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2s2_pins_a>;
+	pinctrl-1 = <&i2s2_pins_sleep_a>;
+	status = "okay";
+
+	i2s2_port: port {
+		i2s2_endpoint: endpoint {
+			remote-endpoint = <&sii9022_tx_endpoint>;
+			format = "i2s";
+			mclk-fs = <256>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-1 = <&ltdc_pins_sleep_a>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&cs42l51_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <256>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <32>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm1_pins_a>;
+		pinctrl-1 = <&pwm1_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&timers6 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	timer@5 {
+		status = "okay";
+	};
+};
+
+&timers12 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm12_pins_a>;
+		pinctrl-1 = <&pwm12_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@11 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/dts/src/arm/stm32mp15xxaa-pinctrl.dtsi b/dts/src/arm/stm32mp15xxaa-pinctrl.dtsi
new file mode 100644
index 0000000000..04f7a43ad6
--- /dev/null
+++ b/dts/src/arm/stm32mp15xxaa-pinctrl.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@5000b000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@5000c000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AA>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/dts/src/arm/stm32mp15xxab-pinctrl.dtsi b/dts/src/arm/stm32mp15xxab-pinctrl.dtsi
new file mode 100644
index 0000000000..328dad140e
--- /dev/null
+++ b/dts/src/arm/stm32mp15xxab-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AB>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/dts/src/arm/stm32mp15xxac-pinctrl.dtsi b/dts/src/arm/stm32mp15xxac-pinctrl.dtsi
new file mode 100644
index 0000000000..7eaa245f44
--- /dev/null
+++ b/dts/src/arm/stm32mp15xxac-pinctrl.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
+
+	gpioi: gpio@5000a000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	st,package = <STM32MP_PKG_AC>;
+
+	gpioz: gpio@54004000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl_z 0 400 8>;
+	};
+};
diff --git a/dts/src/arm/stm32mp15xxad-pinctrl.dtsi b/dts/src/arm/stm32mp15xxad-pinctrl.dtsi
new file mode 100644
index 0000000000..b63e207de2
--- /dev/null
+++ b/dts/src/arm/stm32mp15xxad-pinctrl.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AD>;
+
+	gpioa: gpio@50002000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@50003000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@50004000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
+
+	gpiod: gpio@50005000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@50006000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@50007000 {
+		status = "okay";
+		ngpios = <6>;
+		gpio-ranges = <&pinctrl 6 86 6>;
+	};
+
+	gpiog: gpio@50008000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl 6 102 10>;
+	};
+
+	gpioh: gpio@50009000 {
+		status = "okay";
+		ngpios = <2>;
+		gpio-ranges = <&pinctrl 0 112 2>;
+	};
+};
diff --git a/dts/src/arm/sun4i-a10.dtsi b/dts/src/arm/sun4i-a10.dtsi
index 4c268b70b7..bf531efc06 100644
--- a/dts/src/arm/sun4i-a10.dtsi
+++ b/dts/src/arm/sun4i-a10.dtsi
@@ -624,6 +624,16 @@
 			status = "disabled";
 		};
 
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
 		spi3: spi@1c1f000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
@@ -670,6 +680,31 @@
 				function = "can";
 			};
 
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
 			emac_pins: emac0-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
diff --git a/dts/src/arm/sun5i.dtsi b/dts/src/arm/sun5i.dtsi
index 6befa236ba..0b526e6e5a 100644
--- a/dts/src/arm/sun5i.dtsi
+++ b/dts/src/arm/sun5i.dtsi
@@ -185,7 +185,7 @@
 		mbus: dram-controller@1c01000 {
 			compatible = "allwinner,sun5i-a13-mbus";
 			reg = <0x01c01000 0x1000>;
-			clocks = <&ccu 99>;
+			clocks = <&ccu CLK_MBUS>;
 			dma-ranges = <0x00000000 0x40000000 0x20000000>;
 			#interconnect-cells = <1>;
 		};
@@ -275,6 +275,7 @@
 			compatible = "allwinner,sun5i-a13-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 			resets = <&ccu RST_LCD>;
 			reset-names = "lcd";
 			clocks = <&ccu CLK_AHB_LCD>,
diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi
index 2cf34ae1c1..7762fbd9a1 100644
--- a/dts/src/arm/sun6i-a31.dtsi
+++ b/dts/src/arm/sun6i-a31.dtsi
@@ -285,14 +285,19 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD0>;
-			reset-names = "lcd";
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			clocks = <&ccu CLK_AHB1_LCD0>,
 				 <&ccu CLK_LCD0_CH0>,
-				 <&ccu CLK_LCD0_CH1>;
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
@@ -334,14 +339,18 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD1>;
-			reset-names = "lcd";
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB1_LCD1>,
 				 <&ccu CLK_LCD1_CH0>,
-				 <&ccu CLK_LCD1_CH1>;
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon1-pixel-clock";
 			#clock-cells = <0>;
 
diff --git a/dts/src/arm/sun7i-a20.dtsi b/dts/src/arm/sun7i-a20.dtsi
index 8aebefd6ac..92b5be9708 100644
--- a/dts/src/arm/sun7i-a20.dtsi
+++ b/dts/src/arm/sun7i-a20.dtsi
@@ -729,6 +729,17 @@
 			status = "disabled";
 		};
 
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
 		spi3: spi@1c1f000 {
 			compatible = "allwinner,sun4i-a10-spi";
 			reg = <0x01c1f000 0x1000>;
@@ -803,6 +814,31 @@
 			};
 
 			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
 			emac_pa_pins: emac-pa-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
diff --git a/dts/src/arm/sun8i-a23-a33.dtsi b/dts/src/arm/sun8i-a23-a33.dtsi
index f292f96ab3..48487f6d4a 100644
--- a/dts/src/arm/sun8i-a23-a33.dtsi
+++ b/dts/src/arm/sun8i-a23-a33.dtsi
@@ -182,14 +182,19 @@
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
 			clocks = <&ccu CLK_BUS_LCD>,
-				 <&ccu CLK_LCD_CH0>;
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
 			clock-names = "ahb",
-				      "tcon-ch0";
+				      "tcon-ch0",
+				      "lvds-alt";
 			clock-output-names = "tcon-pixel-clock";
 			#clock-cells = <0>;
-			resets = <&ccu RST_BUS_LCD>;
-			reset-names = "lcd";
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			status = "disabled";
 
 			ports {
diff --git a/dts/src/arm/sun8i-a83t-cubietruck-plus.dts b/dts/src/arm/sun8i-a83t-cubietruck-plus.dts
index fb928503ad..d9be511f05 100644
--- a/dts/src/arm/sun8i-a83t-cubietruck-plus.dts
+++ b/dts/src/arm/sun8i-a83t-cubietruck-plus.dts
@@ -101,7 +101,7 @@
 		initial-mode = <1>; /* initialize in HUB mode */
 		disabled-ports = <1>;
 		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-		reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
 		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		refclk-frequency = <19200000>;
 	};
diff --git a/dts/src/arm/sun8i-a83t.dtsi b/dts/src/arm/sun8i-a83t.dtsi
index 53c38deb8a..74ac7ee938 100644
--- a/dts/src/arm/sun8i-a83t.dtsi
+++ b/dts/src/arm/sun8i-a83t.dtsi
@@ -50,6 +50,7 @@
 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -581,6 +582,12 @@
 		sid: eeprom@1c14000 {
 			compatible = "allwinner,sun8i-a83t-sid";
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
 		};
 
 		crypto: crypto@1c15000 {
@@ -999,9 +1006,9 @@
 			reg = <0x01c30000 0x104>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			resets = <&ccu 13>;
+			resets = <&ccu CLK_BUS_EMAC>;
 			reset-names = "stmmaceth";
-			clocks = <&ccu 27>;
+			clocks = <&ccu RST_BUS_EMAC>;
 			clock-names = "stmmaceth";
 			status = "disabled";
 
@@ -1095,7 +1102,7 @@
 			compatible = "allwinner,sun8i-a83t-r-ccu";
 			reg = <0x01f01400 0x400>;
 			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
-				 <&ccu 6>;
+				 <&ccu CLK_PLL_PERIPH>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -1165,5 +1172,34 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
 	};
 };
diff --git a/dts/src/arm/sun8i-h3-beelink-x2.dts b/dts/src/arm/sun8i-h3-beelink-x2.dts
index ac9e26b1d9..45a24441ff 100644
--- a/dts/src/arm/sun8i-h3-beelink-x2.dts
+++ b/dts/src/arm/sun8i-h3-beelink-x2.dts
@@ -143,6 +143,7 @@
 };
 
 &ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
 	pinctrl-names = "default";
 	pinctrl-0 = <&r_ir_rx_pin>;
 	status = "okay";
diff --git a/dts/src/arm/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/dts/src/arm/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 0000000000..02fbe00cde
--- /dev/null
+++ b/dts/src/arm/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/dts/src/arm/sun8i-h3-emlid-neutis-n5h3.dtsi b/dts/src/arm/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 0000000000..eedd5da5dc
--- /dev/null
+++ b/dts/src/arm/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/dts/src/arm/sun8i-h3-nanopi-duo2.dts b/dts/src/arm/sun8i-h3-nanopi-duo2.dts
index c73f599009..6b149271ef 100644
--- a/dts/src/arm/sun8i-h3-nanopi-duo2.dts
+++ b/dts/src/arm/sun8i-h3-nanopi-duo2.dts
@@ -60,8 +60,7 @@
 		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
-		states = <1100000 0x0
-			  1300000 0x1>;
+		states = <1100000 0>, <1300000 1>;
 	};
 
 	reg_vcc_dram: vcc-dram {
diff --git a/dts/src/arm/sun8i-h3.dtsi b/dts/src/arm/sun8i-h3.dtsi
index fe773c72a6..20217e2ca4 100644
--- a/dts/src/arm/sun8i-h3.dtsi
+++ b/dts/src/arm/sun8i-h3.dtsi
@@ -80,7 +80,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
@@ -90,7 +90,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
@@ -100,7 +100,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -111,6 +111,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -199,6 +208,26 @@
 			assigned-clocks = <&ccu CLK_GPU>;
 			assigned-clock-rates = <384000000>;
 		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
 	};
 };
 
diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi
index 421dfbbfd7..8f09a24b36 100644
--- a/dts/src/arm/sun8i-r40.dtsi
+++ b/dts/src/arm/sun8i-r40.dtsi
@@ -44,6 +44,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 
@@ -78,25 +79,25 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
@@ -180,6 +181,20 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun8i-r40-mmc",
 				     "allwinner,sun50i-a64-mmc";
@@ -355,6 +370,20 @@
 				function = "clk_out_a";
 			};
 
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
 			gmac_rgmii_pins: gmac-rgmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 				       "PA4", "PA5", "PA6", "PA7",
@@ -373,6 +402,26 @@
 				function = "i2c0";
 			};
 
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
@@ -398,6 +447,36 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
@@ -528,6 +607,8 @@
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C1>;
 			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -539,6 +620,8 @@
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C2>;
 			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -550,6 +633,8 @@
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C3>;
 			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -561,6 +646,60 @@
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_I2C4>;
 			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@1c07000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c07000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi3: spi@1c0f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c0f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -596,6 +735,14 @@
 			};
 		};
 
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
 		tcon_top: tcon-top@1c70000 {
 			compatible = "allwinner,sun8i-r40-tcon-top";
 			reg = <0x01c70000 0x1000>;
@@ -718,7 +865,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV0>;
 			reset-names = "lcd";
@@ -761,7 +908,7 @@
 			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c74000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
 			clock-names = "ahb", "tcon-ch1";
 			resets = <&ccu RST_BUS_TCON_TV1>;
 			reset-names = "lcd";
@@ -803,7 +950,7 @@
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
+			      <0x01c82000 0x2000>,
 			      <0x01c84000 0x2000>,
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
@@ -848,7 +995,7 @@
 			compatible = "allwinner,sun8i-r40-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu 7>, <&ccu 16>;
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
 			clock-names = "bus", "mod", "pll-0", "pll-1";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -856,6 +1003,15 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/dts/src/arm/sun8i-v3s.dtsi b/dts/src/arm/sun8i-v3s.dtsi
index 23ba56df38..81ea50838c 100644
--- a/dts/src/arm/sun8i-v3s.dtsi
+++ b/dts/src/arm/sun8i-v3s.dtsi
@@ -123,8 +123,6 @@
 			clock-names = "bus",
 				      "mod";
 			resets = <&display_clocks 0>;
-			assigned-clocks = <&display_clocks 6>;
-			assigned-clock-rates = <150000000>;
 
 			ports {
 				#address-cells = <1>;
diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi
index 1d900f591d..ce4fa6706d 100644
--- a/dts/src/arm/sun9i-a80.dtsi
+++ b/dts/src/arm/sun9i-a80.dtsi
@@ -387,16 +387,16 @@
 		usbphy2: phy@a01800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a01800 0x4>;
-			clocks = <&usb_clocks CLK_USB1_HSIC>,
+			clocks = <&usb_clocks CLK_USB1_PHY>,
 				 <&usb_clocks CLK_USB_HSIC>,
-				 <&usb_clocks CLK_USB1_PHY>;
-			clock-names = "hsic_480M",
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
 				      "hsic_12M",
-				      "phy";
-			resets = <&usb_clocks RST_USB1_HSIC>,
-				 <&usb_clocks RST_USB1_PHY>;
-			reset-names = "hsic",
-				      "phy";
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
 			status = "disabled";
 			#phy-cells = <0>;
 			/* usb1 is always used with HSIC */
@@ -429,16 +429,16 @@
 		usbphy3: phy@a02800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a02800 0x4>;
-			clocks = <&usb_clocks CLK_USB2_HSIC>,
+			clocks = <&usb_clocks CLK_USB2_PHY>,
 				 <&usb_clocks CLK_USB_HSIC>,
-				 <&usb_clocks CLK_USB2_PHY>;
-			clock-names = "hsic_480M",
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
 				      "hsic_12M",
-				      "phy";
-			resets = <&usb_clocks RST_USB2_HSIC>,
-				 <&usb_clocks RST_USB2_PHY>;
-			reset-names = "hsic",
-				      "phy";
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
 			status = "disabled";
 			#phy-cells = <0>;
 		};
@@ -530,9 +530,7 @@
 			compatible = "allwinner,sun9i-a80-mmc-config-clk";
 			reg = <0x01c13000 0x10>;
 			clocks = <&ccu CLK_BUS_MMC>;
-			clock-names = "ahb";
 			resets = <&ccu RST_BUS_MMC>;
-			reset-names = "ahb";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			clock-output-names = "mmc0_config", "mmc1_config",
@@ -880,8 +878,12 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
 			clock-names = "ahb", "tcon-ch0";
-			resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
-			reset-names = "lcd", "edp";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
diff --git a/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi b/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 0000000000..fc67e30fe2
--- /dev/null
+++ b/dts/src/arm/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi
index 0afea59486..5e9c3060aa 100644
--- a/dts/src/arm/sunxi-h3-h5.dtsi
+++ b/dts/src/arm/sunxi-h3-h5.dtsi
@@ -231,6 +231,12 @@
 		sid: eeprom@1c14000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
 		};
 
 		usb_otg: usb@1c19000 {
@@ -553,7 +559,7 @@
 		mbus: dram-controller@1c62000 {
 			compatible = "allwinner,sun8i-h3-mbus";
 			reg = <0x01c62000 0x1000>;
-			clocks = <&ccu 113>;
+			clocks = <&ccu CLK_MBUS>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
 			#interconnect-cells = <1>;
 		};
@@ -811,7 +817,7 @@
 			compatible = "allwinner,sun8i-h3-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu 6>;
+				 <&ccu CLK_PLL_VIDEO>;
 			clock-names = "bus", "mod", "pll-0";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -831,7 +837,8 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
diff --git a/dts/src/arm/sunxi-libretech-all-h3-it.dtsi b/dts/src/arm/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 0000000000..204fba3614
--- /dev/null
+++ b/dts/src/arm/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/dts/src/arm/tegra124-apalis-emc.dtsi b/dts/src/arm/tegra124-apalis-emc.dtsi
index d18eaf4a4a..32401457ae 100644
--- a/dts/src/arm/tegra124-apalis-emc.dtsi
+++ b/dts/src/arm/tegra124-apalis-emc.dtsi
@@ -84,7 +84,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/dts/src/arm/tegra124-jetson-tk1-emc.dtsi b/dts/src/arm/tegra124-jetson-tk1-emc.dtsi
index 784a529e1f..861d3f2211 100644
--- a/dts/src/arm/tegra124-jetson-tk1-emc.dtsi
+++ b/dts/src/arm/tegra124-jetson-tk1-emc.dtsi
@@ -79,7 +79,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
diff --git a/dts/src/arm/tegra124-nyan-big-emc.dtsi b/dts/src/arm/tegra124-nyan-big-emc.dtsi
index fb6b3e1a0b..c91647d13a 100644
--- a/dts/src/arm/tegra124-nyan-big-emc.dtsi
+++ b/dts/src/arm/tegra124-nyan-big-emc.dtsi
@@ -219,7 +219,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/dts/src/arm/tegra124-nyan-blaze-emc.dtsi b/dts/src/arm/tegra124-nyan-blaze-emc.dtsi
index c7c31d4c1a..d2beea0bd1 100644
--- a/dts/src/arm/tegra124-nyan-blaze-emc.dtsi
+++ b/dts/src/arm/tegra124-nyan-blaze-emc.dtsi
@@ -68,7 +68,7 @@
 		};
 	};
 
-	emc@7001b000 {
+	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
diff --git a/dts/src/arm/tegra124.dtsi b/dts/src/arm/tegra124.dtsi
index 413bfb981d..7f330b1f15 100644
--- a/dts/src/arm/tegra124.dtsi
+++ b/dts/src/arm/tegra124.dtsi
@@ -622,9 +622,11 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@7001b000 {
+	emc: external-memory-controller@7001b000 {
 		compatible = "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
 
 		nvidia,memory-controller = <&mc>;
 	};
diff --git a/dts/src/arm/tegra20-paz00.dts b/dts/src/arm/tegra20-paz00.dts
index 85fce5bc72..be0ab9b84b 100644
--- a/dts/src/arm/tegra20-paz00.dts
+++ b/dts/src/arm/tegra20-paz00.dts
@@ -311,6 +311,52 @@
 		reset-names = "i2c";
 	};
 
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@hynix {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
diff --git a/dts/src/arm/uniphier-ld4.dtsi b/dts/src/arm/uniphier-ld4.dtsi
index 58cd4e8fa5..64ec46c72a 100644
--- a/dts/src/arm/uniphier-ld4.dtsi
+++ b/dts/src/arm/uniphier-ld4.dtsi
@@ -410,7 +410,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm/uniphier-pinctrl.dtsi b/dts/src/arm/uniphier-pinctrl.dtsi
index 1fee5ffbfb..bfdfb764b2 100644
--- a/dts/src/arm/uniphier-pinctrl.dtsi
+++ b/dts/src/arm/uniphier-pinctrl.dtsi
@@ -106,6 +106,16 @@
 		function = "i2c4";
 	};
 
+	pinctrl_i2c5: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	pinctrl_i2c6: i2c6 {
+		groups = "i2c6";
+		function = "i2c6";
+	};
+
 	pinctrl_nand: nand {
 		groups = "nand";
 		function = "nand";
diff --git a/dts/src/arm/uniphier-pro4.dtsi b/dts/src/arm/uniphier-pro4.dtsi
index 7f64e5a616..2ec04d7972 100644
--- a/dts/src/arm/uniphier-pro4.dtsi
+++ b/dts/src/arm/uniphier-pro4.dtsi
@@ -600,7 +600,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi
index eff74717b3..ea3961f920 100644
--- a/dts/src/arm/uniphier-pro5.dtsi
+++ b/dts/src/arm/uniphier-pro5.dtsi
@@ -465,7 +465,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 
 		emmc: sdhc@68400000 {
diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi
index 4eddbb8d7f..13b0d4a774 100644
--- a/dts/src/arm/uniphier-pxs2.dtsi
+++ b/dts/src/arm/uniphier-pxs2.dtsi
@@ -773,7 +773,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm/uniphier-sld8.dtsi b/dts/src/arm/uniphier-sld8.dtsi
index cbebb6e4c6..4fc6676f54 100644
--- a/dts/src/arm/uniphier-sld8.dtsi
+++ b/dts/src/arm/uniphier-sld8.dtsi
@@ -414,7 +414,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm/vf610-zii-dev-rev-b.dts b/dts/src/arm/vf610-zii-dev-rev-b.dts
index 48086c5e85..e500911ce0 100644
--- a/dts/src/arm/vf610-zii-dev-rev-b.dts
+++ b/dts/src/arm/vf610-zii-dev-rev-b.dts
@@ -323,11 +323,6 @@
 };
 
 &i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	status = "okay";
-
 	gpio5: io-expander@20 {
 		compatible = "nxp,pca9554";
 		reg = <0x20>;
@@ -350,11 +345,6 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
 	tca9548@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
diff --git a/dts/src/arm/vf610-zii-scu4-aib.dts b/dts/src/arm/vf610-zii-scu4-aib.dts
index d7caf618f9..b642520199 100644
--- a/dts/src/arm/vf610-zii-scu4-aib.dts
+++ b/dts/src/arm/vf610-zii-scu4-aib.dts
@@ -407,7 +407,7 @@
 	pinctrl-0 = <&pinctrl_dspi1>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -420,7 +420,7 @@
 		};
 	};
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -509,7 +509,7 @@
 		#gpio-cells = <2>;
 	};
 
-	lm75@48 {
+	temp-sensor@48 {
 		compatible = "national,lm75";
 		reg = <0x48>;
 	};
@@ -524,7 +524,7 @@
 		reg = <0x52>;
 	};
 
-	ds1682@6b {
+	elapsed-time-recorder@6b {
 		compatible = "dallas,ds1682";
 		reg = <0x6b>;
 	};
@@ -536,7 +536,12 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	adt7411@4a {
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
@@ -548,7 +553,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	gpio9: sx1503q@20 {
+	gpio9: io-expander@20 {
 		compatible = "semtech,sx1503q";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sx1503_20>;
@@ -559,12 +564,12 @@
 		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 	};
 
-	lm75@4e {
+	temp-sensor@4e {
 		compatible = "national,lm75";
 		reg = <0x4e>;
 	};
 
-	lm75@4f {
+	temp-sensor@4f {
 		compatible = "national,lm75";
 		reg = <0x4f>;
 	};
@@ -576,17 +581,17 @@
 		reg = <0x23>;
 	};
 
-	adt7411@4a {
+	adc@4a {
 		compatible = "adi,adt7411";
 		reg = <0x4a>;
 	};
 
-	at24c08@54 {
+	eeprom@54 {
 		compatible = "atmel,24c08";
 		reg = <0x54>;
 	};
 
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		#address-cells = <1>;
@@ -625,7 +630,7 @@
 		};
 	};
 
-	tca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		pinctrl-names = "default";
 		reg = <0x71>;
diff --git a/dts/src/arm/zynq-7000.dtsi b/dts/src/arm/zynq-7000.dtsi
index ca6425ad79..db3899b079 100644
--- a/dts/src/arm/zynq-7000.dtsi
+++ b/dts/src/arm/zynq-7000.dtsi
@@ -59,6 +59,39 @@
 		regulator-always-on;
 	};
 
+	replicator {
+		compatible = "arm,coresight-static-replicator";
+		clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+		clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+		};
+		in-ports {
+			/* replicator input port */
+			port {
+				replicator_in_port0: endpoint {
+					remote-endpoint = <&funnel_out_port>;
+				};
+			};
+		};
+	};
+
 	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -365,5 +398,107 @@
 			reg = <0xf8005000 0x1000>;
 			timeout-sec = <10>;
 		};
+
+		etb@f8801000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0xf8801000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					etb_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port1>;
+					};
+				};
+			};
+		};
+
+		tpiu@f8803000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0xf8803000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			in-ports {
+				port {
+					tpiu_in_port: endpoint {
+						remote-endpoint = <&replicator_out_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@f8804000 {
+			compatible = "arm,coresight-static-funnel", "arm,primecell";
+			reg = <0xf8804000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+
+			/* funnel output ports */
+			out-ports {
+				port {
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					funnel0_in_port0: endpoint {
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel0_in_port1: endpoint {
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel0_in_port2: endpoint {
+					};
+				};
+				/* The other input ports are not connect to anything */
+			};
+		};
+
+		ptm@f889c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889c000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu0>;
+			out-ports {
+				port {
+					ptm0_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port0>;
+					};
+				};
+			};
+		};
+
+		ptm@f889d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0xf889d000 0x1000>;
+			clocks = <&clkc 27>, <&clkc 46>, <&clkc 47>;
+			clock-names = "apb_pclk", "dbg_trc", "dbg_apb";
+			cpu = <&cpu1>;
+			out-ports {
+				port {
+					ptm1_out_port: endpoint {
+						remote-endpoint = <&funnel0_in_port1>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/dts/src/arm64/allwinner/axp803.dtsi b/dts/src/arm64/allwinner/axp803.dtsi
index f0349ef4bf..10e9186a76 100644
--- a/dts/src/arm64/allwinner/axp803.dtsi
+++ b/dts/src/arm64/allwinner/axp803.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
 
 /*
  * AXP803 Integrated Power Management Chip
diff --git a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts
index 5634245d11..c7bd73f35e 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts
@@ -1,12 +1,11 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -65,6 +64,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &csi {
 	status = "okay";
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
index 208373efee..883f217efb 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -108,6 +70,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64-cpu-opp.dtsi b/dts/src/arm64/allwinner/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 0000000000..578c37490d
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
index 9b9d915712..e58db8a6ca 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -87,6 +49,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
index 787ebd805a..577f9e1d08 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -1,9 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Oceanic Systems (UK) Ltd.
- * Copyright (C) 2019 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 /dts-v1/;
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino-emmc.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino-emmc.dts
index 96ab0227e8..efb20846de 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino-emmc.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
- * Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
- */
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
 
 #include "sun50i-a64-olinuxino.dts"
 
@@ -15,9 +13,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	vqmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
 	status = "okay";
 };
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52eda..6dfafa1c87 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-olinuxino.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -87,6 +49,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
@@ -140,7 +118,7 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&reg_aldo2>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_dldo4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
@@ -163,6 +141,23 @@
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
 &r_rsb {
 	status = "okay";
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
index f54a415f2e..fde9c7a99b 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts
@@ -1,49 +1,11 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -123,6 +85,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts
index 72d6961dc3..302e24be0a 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pine64-lts.dts
@@ -1,8 +1,5 @@
-/*
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
- *
- * Copyright (c) 2018 ARM Ltd.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
 
 #include "sun50i-a64-sopine-baseboard.dts"
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
index d5b6e8159a..b26181cf90 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
 
 #include "sun50i-a64-pine64.dts"
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts
index 409523cb09..2165f238af 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts
@@ -1,48 +1,10 @@
-/*
- * Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -84,6 +46,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
index 78c82a665c..3d894b2089 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-pinebook.dts
@@ -1,15 +1,14 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
- *
- */
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
@@ -60,6 +59,7 @@
 			linux,code = <SW_LID>;
 			linux,can-disable;
 			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
 		};
 	};
 
@@ -98,6 +98,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &dai {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts b/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
index 920103ec00..2f6ea9f3f6 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- *   Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
 
 /dts-v1/;
 
diff --git a/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi b/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi
index 9d20e13f0c..c48692b06e 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-a64-sopine.dtsi
@@ -1,49 +1,10 @@
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-a64-pine64.dts, which is:
- *   Copyright (c) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -51,6 +12,22 @@
 	cpvdd-supply = <&reg_eldo1>;
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts
index 970415106d..f5df5f705b 100644
--- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts
+++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts
@@ -1,13 +1,11 @@
-/*
- * Copyright (C) Harald Geyer <harald@ccbib.org>
- * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
- *
- * SPDX-License-Identifier: (GPL-2.0 OR MIT)
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
 #include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -104,6 +102,22 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci1 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi
index 27e48234f1..862b47dc9d 100644
--- a/dts/src/arm64/allwinner/sun50i-a64.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi
@@ -1,46 +1,7 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * based on the Allwinner H3 dtsi:
- *    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+//    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
 #include <dt-bindings/clock/sun8i-de2.h>
@@ -49,6 +10,7 @@
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -89,6 +51,9 @@
 			reg = <0>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -97,6 +62,9 @@
 			reg = <1>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -105,6 +73,9 @@
 			reg = <2>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -113,6 +84,9 @@
 			reg = <3>;
 			enable-method = "psci";
 			next-level-cache = <&L2>;
+			clocks = <&ccu 21>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		L2: l2-cache {
@@ -211,6 +185,69 @@
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0_thermal: gpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu1_thermal: gpu1-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -382,6 +419,12 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
 				};
 			};
 		};
@@ -485,6 +528,12 @@
 		sid: eeprom@1c14000 {
 			compatible = "allwinner,sun50i-a64-sid";
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 0x8>;
+			};
 		};
 
 		crypto: crypto@1c15000 {
@@ -593,7 +642,7 @@
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu 58>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -810,6 +859,18 @@
 			status = "disabled";
 		};
 
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-a64-ths";
+			reg = <0x01c25000 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -1014,6 +1075,37 @@
 			status = "disabled";
 		};
 
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun50i-a64-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		hdmi: hdmi@1ee0000 {
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
@@ -1051,7 +1143,7 @@
 			compatible = "allwinner,sun50i-a64-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu 7>;
+				 <&ccu CLK_PLL_VIDEO0>;
 			clock-names = "bus", "mod", "pll-0";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -1081,7 +1173,8 @@
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun50i-a64-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>;
+			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
diff --git a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index c924090331..076a0b9831 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
 /*
  * DTS for Emlid Neutis N5 Dev board.
- *
- * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
  */
 
 /dts-v1/;
@@ -15,14 +15,6 @@
 		     "emlid,neutis-n5",
 		     "allwinner,sun50i-h5";
 
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -34,16 +26,6 @@
 		};
 	};
 
-	reg_usb0_vbus: usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
-		status = "okay";
-	};
-
 	vdd_cpux: gpio-regulator {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-cpux";
@@ -59,33 +41,11 @@
 	};
 };
 
-&codec {
-	allwinner,audio-routing =
-		"Line Out", "LINEOUT",
-		"LINEIN", "Line In",
-		"MIC1", "Mic",
-		"MIC2", "Mic",
-		"Mic",  "MBIAS";
-	status = "okay";
-};
-
-&de {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
 };
 
-&ehci1 {
-	status = "okay";
-};
-
-&ehci2 {
-	status = "okay";
-};
-
-&ehci3 {
+&codec {
 	status = "okay";
 };
 
@@ -106,42 +66,6 @@
 	};
 };
 
-&mmc0 {
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&ohci2 {
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pa_pins>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbphy {
-	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
+&i2c1 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
index 5bec574fa1..fc57001149 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -1,73 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
 /*
  * DTSI for Emlid Neutis N5 SoM.
- *
- * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
  */
 
 /dts-v1/;
 
 #include "sun50i-h5.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
-		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&r_pio>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
-		clock-names = "lpo";
-		vbat-supply = <&reg_vcc3v3>;
-		vddio-supply = <&reg_vcc3v3>;
-		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
-		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
-	};
-};
+#include <arm/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts
index d68bdfea22..64d35daf20 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2018 BayLibre, SAS
- * Author: Neil Armstrong <narmstrong@baylibre.com>
- */
+// Copyright (C) 2018 BayLibre, SAS
+// Author: Neil Armstrong <narmstrong@baylibre.com>
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-it.dts b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-it.dts
new file mode 100644
index 0000000000..e59d68b525
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-it.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-libretech-all-h3-it.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-IT H5";
+	compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h5-cc.dts
new file mode 100644
index 0000000000..df1b9263ad
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h5-cc.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+#include "sun50i-h5-libretech-all-h3-cc.dts"
+
+/ {
+	model = "Libre Computer Board ALL-H5-CC H5";
+	compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+};
+
+&codec {
+	/* No line out; only onboard microphone */
+	allwinner,audio-routing =
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+};
+
+/* This board has external PHY */
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+	/delete-property/ allwinner,leds-active-low;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 1c7dde84e5..4f9ba53ffa 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -1,45 +1,6 @@
-/*
- * Copyright (C) 2017 Antony Antony <antony@phenome.org>
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Antony Antony <antony@phenome.org>
+// Copyright (C) 2016 ARM Ltd.
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts
index 57a6f45036..b059e20813 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
index e126c1c9f0..70b5f09984 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
index d9b3ed2570..cb44bfa598 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-prime.dts
@@ -1,47 +1,7 @@
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
- *
- * Based on sun50i-h5-orangepi-pc2.dts, which is:
- *   Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-h5-orangepi-pc2.dts, which is:
+//   Copyright (C) 2016 ARM Ltd.
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
index db6ea7b589..ef5ca64442 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -1,9 +1,6 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- * Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR X11)
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index dacf613995..c95a685413 100644
--- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
 
 /dts-v1/;
 
diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi
index e92c4de5bf..9893aa64dd 100644
--- a/dts/src/arm64/allwinner/sun50i-h5.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi
@@ -1,44 +1,5 @@
-/*
- * Copyright (C) 2016 ARM Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
 
 #include <arm/sunxi-h3-h5.dtsi>
 
@@ -54,21 +15,21 @@
 			enable-method = "psci";
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			reg = <3>;
@@ -76,6 +37,16 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -176,6 +147,32 @@
 			assigned-clocks = <&ccu CLK_GPU>;
 			assigned-clock-rates = <384000000>;
 		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-h5-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu_thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
 	};
 };
 
diff --git a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
index f335f7482a..df6d872c34 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-beelink-gs1.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
 
 /dts-v1/;
 
@@ -76,6 +74,10 @@
 	status = "okay";
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -292,3 +294,7 @@
 	usb0_vbus-supply = <&reg_vcc5v>;
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
index 4ed3fc2c77..c311eee52a 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-3.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
 
 /dts-v1/;
 
@@ -274,6 +272,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
index e098a2475f..e7ca75c0d0 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
 
 #include "sun50i-h6-orangepi.dtsi"
 
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts b/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts
index 12e17567ab..83aab73688 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 #include "sun50i-h6-orangepi.dtsi"
 
diff --git a/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi b/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
index df4cbd7ef9..37f4c57597 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h6-orangepi.dtsi
@@ -1,8 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2018 Amarula Solutions
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
 
 /dts-v1/;
 
diff --git a/dts/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts b/dts/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
new file mode 100644
index 0000000000..f4c8966a64
--- /dev/null
+++ b/dts/src/arm64/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model B";
+	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
+
+	/delete-node/ reg_gmac_3v3;
+};
+
+&hdmi_connector {
+	/delete-property/ ddc-en-gpios;
+};
+
+&emac {
+	phy-supply = <&reg_aldo2>;
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts
index 74899ede00..d1c2aa5b3a 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 /dts-v1/;
 
@@ -10,7 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Pine H64";
+	model = "Pine H64 model A";
 	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
 
 	aliases {
@@ -22,9 +20,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	connector {
+	hdmi_connector: connector {
 		compatible = "hdmi-connector";
 		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 
 		port {
 			hdmi_con_in: endpoint {
@@ -52,6 +51,16 @@
 		};
 	};
 
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usb_vbus: vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb-vbus";
@@ -68,7 +77,7 @@
 	pinctrl-0 = <&ext_rgmii_pins>;
 	phy-mode = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
-	phy-supply = <&reg_aldo2>;
+	phy-supply = <&reg_gmac_3v3>;
 	allwinner,rx-delay-ps = <200>;
 	allwinner,tx-delay-ps = <200>;
 	status = "okay";
diff --git a/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts b/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts
index bccfe1e65b..83e6cb0e59 100644
--- a/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/dts/src/arm64/allwinner/sun50i-h6-tanix-tx6.dts
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
 
 /dts-v1/;
 
@@ -45,6 +43,10 @@
 	status = "okay";
 };
 
+&dwc3 {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -85,6 +87,7 @@
 };
 
 &r_ir {
+	linux,rc-map-name = "rc-tanix-tx5max";
 	status = "okay";
 };
 
@@ -102,3 +105,7 @@
 &usb2phy {
 	status = "okay";
 };
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi
index 29824081b4..3329283e38 100644
--- a/dts/src/arm64/allwinner/sun50i-h6.dtsi
+++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi
@@ -1,7 +1,5 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-/*
- * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
@@ -11,6 +9,7 @@
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -70,6 +69,16 @@
 		clock-output-names = "ext_osc32k";
 	};
 
+	pmu {
+		compatible = "arm,cortex-a53-pmu",
+			     "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -233,6 +242,12 @@
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
 		};
 
 		watchdog: watchdog@30090a0 {
@@ -245,6 +260,16 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@300a000 {
+			compatible = "allwinner,sun50i-h6-pwm";
+			reg = <0x0300a000 0x400>;
+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+			clock-names = "mod", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@300b000 {
 			compatible = "allwinner,sun50i-h6-pinctrl";
 			reg = <0x0300b000 0x400>;
@@ -856,5 +881,31 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
 	};
 };
diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi
index 144a2c19ac..d1fc9c2055 100644
--- a/dts/src/arm64/altera/socfpga_stratix10.dtsi
+++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi
@@ -61,10 +61,10 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 120 8>,
-			     <0 121 8>,
-			     <0 122 8>,
-			     <0 123 8>;
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
new file mode 100644
index 0000000000..9946515b8a
--- /dev/null
+++ b/dts/src/arm64/altera/socfpga_stratix10_socdk_nand.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	ref_033v: 033-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+
+		partition@200000 {
+			label = "env";
+			reg = <0x200000 0x40000>;
+		};
+
+		partition@240000 {
+			label = "dtb";
+			reg = <0x240000 0x40000>;
+		};
+
+		partition@280000 {
+			label = "kernel";
+			reg = <0x280000 0x2000000>;
+		};
+
+		partition@2280000 {
+			label = "misc";
+			reg = <0x2280000 0x2000000>;
+		};
+
+		partition@4280000 {
+			label = "rootfs";
+			reg = <0x4280000 0x3bd80000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00a";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x034B0000>;
+			};
+
+			qspi_rootfs: partition@4000000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x034B0000 0x0EB50000>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/amlogic/meson-a1.dtsi b/dts/src/arm64/amlogic/meson-a1.dtsi
index 7210ad049d..4dec518c4d 100644
--- a/dts/src/arm64/amlogic/meson-a1.dtsi
+++ b/dts/src/arm64/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -74,6 +75,30 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
+
+			reset: reset-controller@0 {
+				compatible = "amlogic,meson-a1-reset";
+				reg = <0x0 0x0 0x0 0x8c>;
+				#reset-cells = <1>;
+			};
+
+			periphs_pinctrl: pinctrl@0400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@0400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi
index 04803c3bcc..aace3d32a3 100644
--- a/dts/src/arm64/amlogic/meson-axg.dtsi
+++ b/dts/src/arm64/amlogic/meson-axg.dtsi
@@ -1169,6 +1169,7 @@
 				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
 				resets = <&arb AXG_ARB_TODDR_A>;
+				amlogic,fifo-depth = <512>;
 				status = "disabled";
 			};
 
@@ -1180,6 +1181,7 @@
 				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
 				resets = <&arb AXG_ARB_TODDR_B>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1191,6 +1193,7 @@
 				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
 				resets = <&arb AXG_ARB_TODDR_C>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1202,6 +1205,7 @@
 				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
 				resets = <&arb AXG_ARB_FRDDR_A>;
+				amlogic,fifo-depth = <512>;
 				status = "disabled";
 			};
 
@@ -1213,6 +1217,7 @@
 				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
 				resets = <&arb AXG_ARB_FRDDR_B>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1224,6 +1229,7 @@
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
 				resets = <&arb AXG_ARB_FRDDR_C>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi
index 7fabc8d965..abe04f4ad7 100644
--- a/dts/src/arm64/amlogic/meson-g12-common.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi
@@ -1968,6 +1968,29 @@
 			};
 		};
 
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
 		vpu: vpu@ff900000 {
 			compatible = "amlogic,meson-g12a-vpu";
 			reg = <0x0 0xff900000 0x0 0x100000>,
diff --git a/dts/src/arm64/amlogic/meson-g12.dtsi b/dts/src/arm64/amlogic/meson-g12.dtsi
index b3ba2fda8a..03054c4788 100644
--- a/dts/src/arm64/amlogic/meson-g12.dtsi
+++ b/dts/src/arm64/amlogic/meson-g12.dtsi
@@ -106,6 +106,7 @@
 			resets = <&arb AXG_ARB_TODDR_A>,
 				 <&clkc_audio AUD_RESET_TODDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -120,6 +121,7 @@
 			resets = <&arb AXG_ARB_TODDR_B>,
 				 <&clkc_audio AUD_RESET_TODDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -134,6 +136,7 @@
 			resets = <&arb AXG_ARB_TODDR_C>,
 				 <&clkc_audio AUD_RESET_TODDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -148,6 +151,7 @@
 			resets = <&arb AXG_ARB_FRDDR_A>,
 				 <&clkc_audio AUD_RESET_FRDDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -162,6 +166,7 @@
 			resets = <&arb AXG_ARB_FRDDR_B>,
 				 <&clkc_audio AUD_RESET_FRDDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -176,6 +181,7 @@
 			resets = <&arb AXG_ARB_FRDDR_C>,
 				 <&clkc_audio AUD_RESET_FRDDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi
new file mode 100644
index 0000000000..248b018c83
--- /dev/null
+++ b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		update-button {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		reg = <0>;
+		max-speed = <1000>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the reset pin of the usb HUB is driven high to take
+	 * it out of reset.
+	 */
+	usb1_rst_pins: usb1_rst_irq {
+		mux {
+			groups = "GPIODV_3";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	/* Make sure the phy irq pin is properly configured as input */
+	eth_phy_irq_pins: eth_phy_irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc5v>;
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_C {
+	pinctrl-0 = <&i2c_c_dv18_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@51 {
+		reg = <0x51>;
+		compatible = "nxp,pcf8563";
+		#clock-cells = <0>;
+		clock-output-names = "rtc_clkout";
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_3_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	status = "okay";
+};
+
+&spifc {
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	gd25lq128: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb1_rst_pins>;
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 0000000000..2f1f829450
--- /dev/null
+++ b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+/ {
+	compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+	model = "Videostrong KII Pro";
+
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+	};
+};
+
+
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts
new file mode 100644
index 0000000000..100a1cfeea
--- /dev/null
+++ b/dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905D-PC";
+};
diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi
index ed33d8efaf..259d863993 100644
--- a/dts/src/arm64/amlogic/meson-gxl.dtsi
+++ b/dts/src/arm64/amlogic/meson-gxl.dtsi
@@ -533,6 +533,15 @@
 			};
 		};
 
+		i2c_c_dv18_pins: i2c_c_dv18 {
+			mux {
+				groups = "i2c_sck_c_dv19",
+				      "i2c_sda_c_dv18";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
 		eth_pins: eth_c {
 			mux {
 				groups = "eth_mdio",
diff --git a/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts
new file mode 100644
index 0000000000..444c249863
--- /dev/null
+++ b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s912-pc", "amlogic,s912",
+		     "amlogic,meson-gxm";
+	model = "Libre Computer AML-S912-PC";
+
+	typec2_vbus: regulator-typec2_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "TYPEC2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the irq pin of the TYPE C controller is not driven
+	 * by the SoC.
+	 */
+	fusb302_irq_pins: fusb302_irq {
+		mux {
+			groups = "GPIODV_0";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&i2c_C {
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		pinctrl-0 = <&fusb302_irq_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+		vbus-supply = <&typec2_vbus>;
+
+		status = "okay";
+	};
+};
+
+&usb2_phy2 {
+	phy-supply = <&typec2_vbus>;
+};
diff --git a/dts/src/arm64/amlogic/meson-sm1-sei610.dts b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
index 5bd0746976..a8bb3fa9fe 100644
--- a/dts/src/arm64/amlogic/meson-sm1-sei610.dts
+++ b/dts/src/arm64/amlogic/meson-sm1-sei610.dts
@@ -46,25 +46,47 @@
 	};
 
 	gpio-keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
+		compatible = "gpio-keys";
 
 		key1 {
 			label = "A";
 			linux,code = <BTN_0>;
 			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key2 {
 			label = "B";
 			linux,code = <BTN_1>;
 			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key3 {
 			label = "C";
 			linux,code = <BTN_2>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		mic_mute {
+			label = "MicMute";
+			linux,code = <SW_MUTE_DEVICE>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		power_key {
+			label = "PowerKey";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
 		};
 	};
 
@@ -569,6 +591,8 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
diff --git a/dts/src/arm64/amlogic/meson-sm1.dtsi b/dts/src/arm64/amlogic/meson-sm1.dtsi
index 7894a5458d..d847a3fcbc 100644
--- a/dts/src/arm64/amlogic/meson-sm1.dtsi
+++ b/dts/src/arm64/amlogic/meson-sm1.dtsi
@@ -201,6 +201,7 @@
 			resets = <&arb AXG_ARB_TODDR_A>,
 				 <&clkc_audio AUD_RESET_TODDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <8192>;
 			status = "disabled";
 		};
 
@@ -215,6 +216,7 @@
 			resets = <&arb AXG_ARB_TODDR_B>,
 				 <&clkc_audio AUD_RESET_TODDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -229,6 +231,7 @@
 			resets = <&arb AXG_ARB_TODDR_C>,
 				 <&clkc_audio AUD_RESET_TODDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -243,6 +246,7 @@
 			resets = <&arb AXG_ARB_FRDDR_A>,
 				 <&clkc_audio AUD_RESET_FRDDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -257,6 +261,7 @@
 			resets = <&arb AXG_ARB_FRDDR_B>,
 				 <&clkc_audio AUD_RESET_FRDDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -271,6 +276,7 @@
 			resets = <&arb AXG_ARB_FRDDR_C>,
 				 <&clkc_audio AUD_RESET_FRDDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -412,6 +418,7 @@
 			resets = <&arb AXG_ARB_TODDR_D>,
 				 <&clkc_audio AUD_RESET_TODDR_D>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -426,6 +433,7 @@
 			resets = <&arb AXG_ARB_FRDDR_D>,
 				 <&clkc_audio AUD_RESET_FRDDR_D>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 	};
@@ -482,6 +490,10 @@
 	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
 };
 
+&vdec {
+	compatible = "amlogic,sm1-vdec";
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
 };
diff --git a/dts/src/arm64/bitmain/bm1880-sophon-edge.dts b/dts/src/arm64/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e..7a2c7f9c26 100644
--- a/dts/src/arm64/bitmain/bm1880-sophon-edge.dts
+++ b/dts/src/arm64/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
 		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
 	};
 
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
-		#clock-cells = <0>;
-	};
-
 	soc {
 		gpio0: gpio@50027000 {
 			porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
 
 &uart0 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 &uart2 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_default>;
 };
diff --git a/dts/src/arm64/bitmain/bm1880.dtsi b/dts/src/arm64/bitmain/bm1880.dtsi
index d65453f99a..fa6e6905f5 100644
--- a/dts/src/arm64/bitmain/bm1880.dtsi
+++ b/dts/src/arm64/bitmain/bm1880.dtsi
@@ -4,6 +4,7 @@
  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
  */
 
+#include <dt-bindings/clock/bm1880-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/bitmain,bm1880-reset.h>
 
@@ -66,6 +67,12 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	osc: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -94,6 +101,15 @@
 				reg = <0x400 0x120>;
 			};
 
+			clk: clock-controller@e8 {
+				compatible = "bitmain,bm1880-clk";
+				reg = <0xe8 0x0c>, <0x800 0xb0>;
+				reg-names = "pll", "sys";
+				clocks = <&osc>;
+				clock-names = "osc";
+				#clock-cells = <1>;
+			};
+
 			rst: reset-controller@c00 {
 				compatible = "bitmain,bm1880-reset";
 				reg = <0xc00 0x8>;
@@ -158,6 +174,9 @@
 		uart0: serial@58018000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -168,6 +187,9 @@
 		uart1: serial@5801A000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -178,6 +200,9 @@
 		uart2: serial@5801C000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -188,6 +213,9 @@
 		uart3: serial@5801E000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
diff --git a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi
index 6f90b0e62c..250fc01de7 100644
--- a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi
+++ b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
  *
  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
  *
diff --git a/dts/src/arm64/exynos/exynos5433-tm2.dts b/dts/src/arm64/exynos/exynos5433-tm2.dts
index dda5d2746a..fdd0796b29 100644
--- a/dts/src/arm64/exynos/exynos5433-tm2.dts
+++ b/dts/src/arm64/exynos/exynos5433-tm2.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos5433 TM2 board device tree source
+ * Samsung Exynos5433 TM2 board device tree source
  *
  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
  *
diff --git a/dts/src/arm64/exynos/exynos5433-tm2e.dts b/dts/src/arm64/exynos/exynos5433-tm2e.dts
index 1e207ce8b9..089fc7a1af 100644
--- a/dts/src/arm64/exynos/exynos5433-tm2e.dts
+++ b/dts/src/arm64/exynos/exynos5433-tm2e.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos5433 TM2E board device tree source
+ * Samsung Exynos5433 TM2E board device tree source
  *
  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
  *
diff --git a/dts/src/arm64/exynos/exynos7-espresso.dts b/dts/src/arm64/exynos/exynos7-espresso.dts
index 080e0f56e1..7af288fa94 100644
--- a/dts/src/arm64/exynos/exynos7-espresso.dts
+++ b/dts/src/arm64/exynos/exynos7-espresso.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG Exynos7 Espresso board device tree source
+ * Samsung Exynos7 Espresso board device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
@@ -13,7 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	model = "Samsung Exynos7 Espresso board based on Exynos7";
 	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
 
 	aliases {
diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi
index 3a00ef0a17..5558045637 100644
--- a/dts/src/arm64/exynos/exynos7.dtsi
+++ b/dts/src/arm64/exynos/exynos7.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS7 SoC device tree source
+ * Samsung Exynos7 SoC device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts
index 5b9d4b35dd..ca409d907b 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts
@@ -123,6 +123,21 @@
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts
index 9720a19004..afb5565385 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts
@@ -93,9 +93,26 @@
 
 &esdhc1 {
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
index 13a3cbe89b..0bf375ec95 100644
--- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi
@@ -175,7 +175,7 @@
 		dcfg: syscon@1e00000 {
 			compatible = "fsl,ls1028a-dcfg", "syscon";
 			reg = <0x0 0x1e00000 0x0 0x10000>;
-			big-endian;
+			little-endian;
 		};
 
 		rst: syscon@1e60000 {
@@ -277,6 +277,19 @@
 			status = "disabled";
 		};
 
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
 		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -322,7 +335,7 @@
 
 		edma0: dma-controller@22c0000 {
 			#dma-cells = <2>;
-			compatible = "fsl,vf610-edma";
+			compatible = "fsl,ls1028a-edma";
 			reg = <0x0 0x22c0000 0x0 0x10000>,
 			      <0x0 0x22d0000 0x0 0x10000>,
 			      <0x0 0x22e0000 0x0 0x10000>;
@@ -534,6 +547,7 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 4>,
 			       <&edma0 1 3>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
@@ -548,6 +562,22 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 6>,
 			       <&edma0 1 5>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai3: audio-controller@f120000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 8>,
+			       <&edma0 1 7>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
@@ -562,6 +592,37 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 10>,
 			       <&edma0 1 9>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai5: audio-controller@f140000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 12>,
+			       <&edma0 1 11>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai6: audio-controller@f150000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 14>,
+			       <&edma0 1 13>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
diff --git a/dts/src/arm64/freescale/fsl-ls1046a-frwy.dts b/dts/src/arm64/freescale/fsl-ls1046a-frwy.dts
index 3595be0f25..db3d303093 100644
--- a/dts/src/arm64/freescale/fsl-ls1046a-frwy.dts
+++ b/dts/src/arm64/freescale/fsl-ls1046a-frwy.dts
@@ -112,6 +112,20 @@
 
 };
 
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 #include "fsl-ls1046-post.dtsi"
 
 &fman0 {
diff --git a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts
index 0c742befb7..dbc23d6cd3 100644
--- a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts
@@ -101,23 +101,23 @@
 &qspi {
 	status = "okay";
 
-	qflash0: flash@0 {
-		compatible = "spansion,m25p80";
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
-	qflash1: flash@1 {
-		compatible = "spansion,m25p80";
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <1>;
 	};
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1088a-qds.dts b/dts/src/arm64/freescale/fsl-ls1088a-qds.dts
index 120e62dad1..41d8b15f25 100644
--- a/dts/src/arm64/freescale/fsl-ls1088a-qds.dts
+++ b/dts/src/arm64/freescale/fsl-ls1088a-qds.dts
@@ -143,6 +143,30 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1088a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1088a-rdb.dts
index 90b1989392..4d77b345ce 100644
--- a/dts/src/arm64/freescale/fsl-ls1088a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-ls1088a-rdb.dts
@@ -86,6 +86,30 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi
index c676d07717..594566265e 100644
--- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi
@@ -375,6 +375,19 @@
 			status = "disabled";
 		};
 
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			status = "disabled";
+		};
+
 		esdhc: esdhc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
diff --git a/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi b/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi
index 6fd7f63085..d0d670227a 100644
--- a/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls208xa-rdb.dtsi
@@ -108,7 +108,15 @@
 };
 
 &qspi {
-	status = "disabled";
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
 };
 
 &sata0 {
diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi
index 7a0be8eaa8..f96d06da96 100644
--- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi
+++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi
@@ -618,16 +618,16 @@
 		};
 
 		qspi: spi@20c0000 {
-			status = "disabled";
-			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+			compatible = "fsl,ls2080a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,
 			      <0x0 0x20000000 0x0 0x10000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 25 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "qspi_en", "qspi";
+			status = "disabled";
 		};
 
 		pcie1: pcie@3400000 {
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi b/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi
new file mode 100644
index 0000000000..071e21678f
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-lx2160a-cex7.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "SolidRun LX2160A COM Express Type 7 module";
+	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "RT7290";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			fan-temperature-ctrlr@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				cooling-min-state = <0>;
+				cooling-max-state = <9>;
+				#cooling-cells = <2>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		// IRQ10_B
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-clearfog-cx.dts b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-cx.dts
new file mode 100644
index 0000000000..86a9b77142
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-cx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog CX board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Clearfog CX";
+	compatible = "solidrun,clearfog-cx",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi
new file mode 100644
index 0000000000..f3741a32e8
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog ITX board; this contains the
+// common parts shared between the Clearfog CX and Honeycomb builds.
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-cex7.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-honeycomb.dts b/dts/src/arm64/freescale/fsl-lx2160a-honeycomb.dts
new file mode 100644
index 0000000000..fe19f3009e
--- /dev/null
+++ b/dts/src/arm64/freescale/fsl-lx2160a-honeycomb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Honeycomb board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Honeycomb";
+	compatible = "solidrun,honeycomb",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts
index c2817b7842..51615de102 100644
--- a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts
+++ b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts
@@ -35,6 +35,34 @@
 	status = "okay";
 };
 
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		eee-broken-1000t;
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		eee-broken-1000t;
+	};
+};
+
 &esdhc0 {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi
index e883fe0fc1..e5ee5591e5 100644
--- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi
+++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi
@@ -939,6 +939,27 @@
 			fsl,extts-fifo;
 		};
 
+		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			little-endian;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,
diff --git a/dts/src/arm64/freescale/imx8mm-evk.dts b/dts/src/arm64/freescale/imx8mm-evk.dts
index 28ab17a277..9e54747cf4 100644
--- a/dts/src/arm64/freescale/imx8mm-evk.dts
+++ b/dts/src/arm64/freescale/imx8mm-evk.dts
@@ -16,6 +16,11 @@
 		stdout-path = &uart2;
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -77,6 +82,26 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
diff --git a/dts/src/arm64/freescale/imx8mm-pinfunc.h b/dts/src/arm64/freescale/imx8mm-pinfunc.h
index cffa899188..5ccc4cc919 100644
--- a/dts/src/arm64/freescale/imx8mm-pinfunc.h
+++ b/dts/src/arm64/freescale/imx8mm-pinfunc.h
@@ -430,18 +430,26 @@
 #define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                 0x1B0 0x418 0x4F4 0x4 0x2
 #define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX                                  0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX                                  0x1B4 0x41C 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                              0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                              0x1B8 0x420 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                              0x1BC 0x424 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                              0x1BC 0x424 0x4F0 0x4 0x3
 #define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
@@ -464,21 +472,29 @@
 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4Fc 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4Fc 0x4 0x3
 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi
index 6edbdfe2d0..1e5e11592f 100644
--- a/dts/src/arm64/freescale/imx8mm.dtsi
+++ b/dts/src/arm64/freescale/imx8mm.dtsi
@@ -140,11 +140,6 @@
 		};
 	};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x0 0x40000000 0 0x80000000>;
-	};
-
 	osc_32k: clock-osc-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -232,7 +227,7 @@
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
@@ -438,7 +433,7 @@
 			};
 
 			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+				compatible = "fsl,imx8mm-anatop", "syscon";
 				reg = <0x30360000 0x10000>;
 			};
 
@@ -501,7 +496,7 @@
 		};
 
 		aips2: bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -560,7 +555,7 @@
 		};
 
 		aips3: bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>;
@@ -641,6 +636,36 @@
 				status = "disabled";
 			};
 
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AHB>,
+					 <&clk IMX8MM_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -740,7 +765,7 @@
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
@@ -775,7 +800,7 @@
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -858,6 +883,16 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+				 <&clk IMX8MM_DRAM_PLL>,
+				 <&clk IMX8MM_CLK_DRAM_ALT>,
+				 <&clk IMX8MM_CLK_DRAM_APB>;
+		};
+
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
diff --git a/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts b/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts
index 071949412c..2497eebb57 100644
--- a/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts
+++ b/dts/src/arm64/freescale/imx8mn-ddr4-evk.dts
@@ -17,6 +17,26 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600M {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
 &i2c1 {
 	pmic@4b {
 		compatible = "rohm,bd71847";
diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi
index 2a74330aee..0d2ec4a2c7 100644
--- a/dts/src/arm64/freescale/imx8mn-evk.dtsi
+++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi
@@ -3,6 +3,7 @@
  * Copyright 2019 NXP
  */
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8mn.dtsi"
 
 / {
@@ -22,6 +23,11 @@
 		};
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -60,6 +66,42 @@
 	status = "okay";
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -70,6 +112,21 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
 &usdhc2 {
 	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
 	assigned-clock-rates = <200000000>;
@@ -138,12 +195,25 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
 		>;
 	};
 
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi
index e91625063f..a44b5438e8 100644
--- a/dts/src/arm64/freescale/imx8mn.dtsi
+++ b/dts/src/arm64/freescale/imx8mn.dtsi
@@ -139,11 +139,6 @@
 		};
 	};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x0 0x40000000 0 0x80000000>;
-	};
-
 	osc_32k: clock-osc-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -208,7 +203,7 @@
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x30000000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -349,7 +344,7 @@
 
 			anatop: anatop@30360000 {
 				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop",
-					     "syscon", "simple-bus";
+					     "syscon";
 				reg = <0x30360000 0x10000>;
 			};
 
@@ -395,7 +390,7 @@
 		};
 
 		aips2: bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x30400000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -455,7 +450,7 @@
 		};
 
 		aips3: bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x30800000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -537,6 +532,36 @@
 				status = "disabled";
 			};
 
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_AHB>,
+					 <&clk IMX8MN_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr0@1000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x1000 0x1000>;
+					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x2000 0x1000>;
+					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr2@3000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x3000 0x1000>;
+					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
 			i2c1: i2c@30a20000 {
 				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -671,7 +696,7 @@
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "fsl,aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			reg = <0x32c00000 0x400000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -683,10 +708,8 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
 				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
-						  <&clk IMX8MN_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
-							 <&clk IMX8MN_SYS_PLL1_100M>;
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
 				status = "disabled";
@@ -759,6 +782,16 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+				 <&clk IMX8MN_DRAM_PLL>,
+				 <&clk IMX8MN_CLK_DRAM_ALT>,
+				 <&clk IMX8MN_CLK_DRAM_APB>;
+		};
+
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts
index c366859166..94066d49d6 100644
--- a/dts/src/arm64/freescale/imx8mq-evk.dts
+++ b/dts/src/arm64/freescale/imx8mq-evk.dts
@@ -105,6 +105,33 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166M {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
diff --git a/dts/src/arm64/freescale/imx8mq-hummingboard-pulse.dts b/dts/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
index b8cb20c01a..bfd91c1ed6 100644
--- a/dts/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
+++ b/dts/src/arm64/freescale/imx8mq-hummingboard-pulse.dts
@@ -84,6 +84,12 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		status = "okay";
+	};
+
 	rtc@69 {
 		compatible = "abracon,ab1805";
 		reg = <0x69>;
diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts
index 2a759dff9f..764a4cb4e1 100644
--- a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts
+++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts
@@ -421,7 +421,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_imu>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
 	};
@@ -440,6 +440,13 @@
 		AVDD28-supply = <&reg_2v8_p>;
 		VDDIO-supply = <&reg_1v8_p>;
 	};
+
+	accel-gyro@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+	};
 };
 
 &iomuxc {
diff --git a/dts/src/arm64/freescale/imx8mq-phanbell.dts b/dts/src/arm64/freescale/imx8mq-phanbell.dts
new file mode 100644
index 0000000000..3f2a489a4a
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mq-phanbell.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Google i.MX8MQ Phanbell";
+	compatible = "google,imx8mq-phanbell", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mq-sr-som.dtsi b/dts/src/arm64/freescale/imx8mq-sr-som.dtsi
index 3dc44114da..602c870a7c 100644
--- a/dts/src/arm64/freescale/imx8mq-sr-som.dtsi
+++ b/dts/src/arm64/freescale/imx8mq-sr-som.dtsi
@@ -125,6 +125,12 @@
 			};
 		};
 	};
+
+	eeprom@50 {
+		compatible = "atmel,24c01";
+		reg = <0x50>;
+		status = "okay";
+	};
 };
 
 &pgc_gpu{
diff --git a/dts/src/arm64/freescale/imx8mq-thor96.dts b/dts/src/arm64/freescale/imx8mq-thor96.dts
new file mode 100644
index 0000000000..b4795a032f
--- /dev/null
+++ b/dts/src/arm64/freescale/imx8mq-thor96.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Einfochips i.MX8MQ Thor96";
+	compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user-led1 {
+			label = "green:user1";
+			gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user-led2 {
+			label = "green:user2";
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led3 {
+			label = "green:user3";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led4 {
+			label = "green:user4";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan-active-led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt-active-led {
+			label = "blue:bt";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	reg_usdhc1_vmmc: reg-usdhc1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc1_vqmmc: reg-usdhc1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_EXT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: reg-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vqmmc: reg-usdhc2-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LS-SPI0 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+		};
+	};
+};
+
+/* LS-I2C0 */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+/* HS-I2C2 */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* HS-I2C3 */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+/* Debug UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_gpios>;
+	};
+};
+
+/* LS-UART1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO */
+&usdhc1 {
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	vqmmc-supply = <&reg_usdhc1_vqmmc>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-sd;
+	no-emmc;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-sdio;
+	no-emmc;
+	disable-wp;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x16
+			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x16
+			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x16
+			MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x16
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x4
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x24
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1c
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1c
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1c
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1c
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1c
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1c
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21		0x19
+			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
+			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xcc
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x17059
+		>;
+	};
+};
diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts b/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts
index d2a6da4799..6b3581366d 100644
--- a/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts
+++ b/dts/src/arm64/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -8,7 +8,7 @@
 #include "imx8mq-zii-ultra.dtsi"
 
 / {
-	model = "ZII i.MX8MQ Ultra RMB3 Board";
+	model = "ZII Ultra RMB3 Board";
 	compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
 };
 
diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts b/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts
index 1084d93304..173b9e9b2b 100644
--- a/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts
+++ b/dts/src/arm64/freescale/imx8mq-zii-ultra-zest.dts
@@ -8,7 +8,7 @@
 #include "imx8mq-zii-ultra.dtsi"
 
 / {
-	model = "ZII i.MX8MQ Ultra Zest Board";
+	model = "ZII Ultra Zest Board";
 	compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
 };
 
diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi
index 7f9319452b..6a1e83922c 100644
--- a/dts/src/arm64/freescale/imx8mq.dtsi
+++ b/dts/src/arm64/freescale/imx8mq.dtsi
@@ -290,11 +290,67 @@
 		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
 
 		bus@30000000 { /* AIPS1 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30000000 0x30000000 0x400000>;
 
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30040000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30040000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
 				reg = <0x30200000 0x10000>;
@@ -448,6 +504,23 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
 			};
 
+			lcdif: lcd-controller@30320000 {
+				compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+				clock-names = "pix";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				status = "disabled";
+			};
+
 			iomuxc: iomuxc@30330000 {
 				compatible = "fsl,imx8mq-iomuxc";
 				reg = <0x30330000 0x10000>;
@@ -519,6 +592,8 @@
 				clock-names = "ckil", "osc_25m", "osc_27m",
 				              "clk_ext1", "clk_ext2",
 				              "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MQ_CLK_NOC>;
+				assigned-clock-rates = <800000000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -617,7 +692,7 @@
 		};
 
 		bus@30400000 { /* AIPS2 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30400000 0x30400000 0x400000>;
@@ -676,7 +751,7 @@
 		};
 
 		bus@30800000 { /* AIPS3 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x30800000 0x30800000 0x400000>,
@@ -765,6 +840,20 @@
 				status = "disabled";
 			};
 
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			crypto: crypto@30900000 {
 				compatible = "fsl,sec-v4.0";
 				#address-cells = <1>;
@@ -934,7 +1023,7 @@
 		};
 
 		bus@32c00000 { /* AIPS4 */
-			compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x32c00000 0x32c00000 0x400000>;
@@ -1113,6 +1202,16 @@
 			interrupt-parent = <&gic>;
 		};
 
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+				 <&clk IMX8MQ_DRAM_PLL_OUT>,
+				 <&clk IMX8MQ_CLK_DRAM_ALT>,
+				 <&clk IMX8MQ_CLK_DRAM_APB>;
+		};
+
 		ddr-pmu@3d800000 {
 			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
 			reg = <0x3d800000 0x400000>;
diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi
index 9646a41e05..fb5f752b15 100644
--- a/dts/src/arm64/freescale/imx8qxp.dtsi
+++ b/dts/src/arm64/freescale/imx8qxp.dtsi
@@ -250,7 +250,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a060000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -262,7 +261,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a070000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -274,7 +272,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a080000 0x1000>;
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -286,7 +283,6 @@
 			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
 			reg = <0x5a090000 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
 				 <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
 			clock-names = "ipg", "baud";
@@ -298,7 +294,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a800000 0x4000>;
 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
@@ -311,7 +306,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a810000 0x4000>;
 			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
@@ -324,7 +318,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a820000 0x4000>;
 			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
@@ -337,7 +330,6 @@
 			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
 			reg = <0x5a830000 0x4000>;
 			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-parent = <&gic>;
 			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
 			clock-names = "per";
 			assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
@@ -361,7 +353,6 @@
 
 		usdhc1: mmc@5b010000 {
 			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b010000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
@@ -374,7 +365,6 @@
 
 		usdhc2: mmc@5b020000 {
 			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b020000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
@@ -389,7 +379,6 @@
 
 		usdhc3: mmc@5b030000 {
 			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x5b030000 0x10000>;
 			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
@@ -446,7 +435,6 @@
 		ddr-pmu@5c020000 {
 			compatible = "fsl,imx8-ddr-pmu";
 			reg = <0x5c020000 0x10000>;
-			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
diff --git a/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts b/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts
index c563d3eb2d..7d370dac4c 100644
--- a/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts
+++ b/dts/src/arm64/hisilicon/hi3798cv200-poplar.dts
@@ -170,6 +170,7 @@
 };
 
 &ir {
+	linux,rc-map-name = "rc-hisi-poplar";
 	status = "okay";
 };
 
diff --git a/dts/src/arm64/hisilicon/hi3798cv200.dtsi b/dts/src/arm64/hisilicon/hi3798cv200.dtsi
index 13821a0ff5..12bc1d3ed4 100644
--- a/dts/src/arm64/hisilicon/hi3798cv200.dtsi
+++ b/dts/src/arm64/hisilicon/hi3798cv200.dtsi
@@ -564,7 +564,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			bus-range = <0 15>;
+			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
 			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000
 				  0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi
index 94090c6fb9..e1d357eaad 100644
--- a/dts/src/arm64/intel/socfpga_agilex.dtsi
+++ b/dts/src/arm64/intel/socfpga_agilex.dtsi
@@ -60,10 +60,10 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 120 8>,
-			     <0 121 8>,
-			     <0 122 8>,
-			     <0 123 8>;
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -113,6 +113,7 @@
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
 			status = "disabled";
 		};
 
@@ -128,6 +129,7 @@
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
 			status = "disabled";
 		};
 
@@ -143,6 +145,7 @@
 			rx-fifo-depth = <16384>;
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
 			status = "disabled";
 		};
 
@@ -249,6 +252,18 @@
 			status = "disabled";
 		};
 
+		nand: nand@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 97 4>;
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
 		ocram: sram@ffe00000 {
 			compatible = "mmio-sram";
 			reg = <0xffe00000 0x40000>;
@@ -325,7 +340,7 @@
 		};
 
 		sysmgr: sysmgr@ffd12000 {
-			compatible = "altr,sys-mgr", "syscon";
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
 			reg = <0xffd12000 0x500>;
 		};
 
@@ -449,6 +464,65 @@
 			reg = <0xf8011100 0xc0>;
 		};
 
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 15 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 4>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 4>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 4>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 4>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 4>;
+			};
+
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+
 		qspi: spi@ff8d2000 {
 			compatible = "cdns,qspi-nor";
 			#address-cells = <1>;
diff --git a/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts b/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts
new file mode 100644
index 0000000000..979aa59a6b
--- /dev/null
+++ b/dts/src/arm64/intel/socfpga_agilex_socdk_nand.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "env";
+			reg = <0x200000 0x40000>;
+		};
+		partition@240000 {
+			label = "dtb";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "kernel";
+			reg = <0x280000 0x2000000>;
+		};
+		partition@2280000 {
+			label = "misc";
+			reg = <0x2280000 0x2000000>;
+		};
+		partition@4280000 {
+			label = "rootfs";
+			reg = <0x4280000 0x3bd80000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/marvell/armada-3720-uDPU.dts b/dts/src/arm64/marvell/armada-3720-uDPU.dts
index bd4aab6092..7eb6c1796c 100644
--- a/dts/src/arm64/marvell/armada-3720-uDPU.dts
+++ b/dts/src/arm64/marvell/armada-3720-uDPU.dts
@@ -69,6 +69,7 @@
 		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
@@ -78,6 +79,7 @@
 		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
 	};
 };
 
@@ -119,12 +121,14 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
 };
 
 &i2c1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
 
 	lm75@48 {
 		status = "okay";
@@ -143,6 +147,7 @@
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy1 0>;
 	sfp = <&sfp_eth0>;
 };
 
@@ -150,11 +155,14 @@
 	phy-mode = "sgmii";
 	status = "okay";
 	managed = "in-band-status";
+	phys = <&comphy0 1>;
 	sfp = <&sfp_eth1>;
 };
 
 &usb3 {
 	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
 };
 
 &uart0 {
diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
index bd881497b8..a211a046b2 100644
--- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts
@@ -408,6 +408,8 @@
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&cp1_eth2>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
 			};
 		};
 
diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi
index 15f1842f6d..8b4e806d51 100644
--- a/dts/src/arm64/mediatek/mt8173.dtsi
+++ b/dts/src/arm64/mediatek/mt8173.dtsi
@@ -157,6 +157,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
 			clocks = <&infracfg CLK_INFRA_CA53SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -170,6 +171,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
 			clocks = <&infracfg CLK_INFRA_CA53SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -183,6 +185,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
 			clocks = <&infracfg CLK_INFRA_CA72SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -196,6 +199,7 @@
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
 			clocks = <&infracfg CLK_INFRA_CA72SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -1401,6 +1405,20 @@
 						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
 		};
 
+		jpegdec: jpegdec@18004000 {
+			compatible = "mediatek,mt8173-jpgdec";
+			reg = <0 0x18004000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&vencsys CLK_VENC_CKE0>,
+				 <&vencsys CLK_VENC_CKE3>;
+			clock-names = "jpgdec-smi",
+				      "jpgdec";
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+			mediatek,larb = <&larb3>;
+			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
+				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
+		};
+
 		vencltsys: clock-controller@19000000 {
 			compatible = "mediatek,mt8173-vencltsys", "syscon";
 			reg = <0 0x19000000 0 0x1000>;
diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi
index 10b32471bc..124f9d3e09 100644
--- a/dts/src/arm64/mediatek/mt8183.dtsi
+++ b/dts/src/arm64/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mt8183-clk.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset-controller/mt8183-resets.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -227,6 +228,7 @@
 			compatible = "mediatek,mt8183-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		pio: pinctrl@10005000 {
@@ -278,6 +280,15 @@
 			clock-names = "clk13m";
 		};
 
+		gce: mailbox@10238000 {
+			compatible = "mediatek,mt8183-gce";
+			reg = <0 0x10238000 0 0x4000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			#mbox-cells = <3>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
 		auxadc: auxadc@11001000 {
 			compatible = "mediatek,mt8183-auxadc",
 				     "mediatek,mt8173-auxadc";
diff --git a/dts/src/arm64/nvidia/tegra132.dtsi b/dts/src/arm64/nvidia/tegra132.dtsi
index 631a7f77c3..6238e6e274 100644
--- a/dts/src/arm64/nvidia/tegra132.dtsi
+++ b/dts/src/arm64/nvidia/tegra132.dtsi
@@ -604,9 +604,11 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@7001b000 {
+	emc: external-memory-controller@7001b000 {
 		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
 
 		nvidia,memory-controller = <&mc>;
 	};
diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi
index 5e18acf5cf..947744d0f0 100644
--- a/dts/src/arm64/nvidia/tegra186-p3310.dtsi
+++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi
@@ -8,6 +8,7 @@
 	compatible = "nvidia,p3310", "nvidia,tegra186";
 
 	aliases {
+		ethernet0 = "/ethernet@2490000";
 		sdhci0 = "/sdhci@3460000";
 		sdhci1 = "/sdhci@3400000";
 		serial0 = &uarta;
diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi
index 7893d78a0f..c905527c26 100644
--- a/dts/src/arm64/nvidia/tegra186.dtsi
+++ b/dts/src/arm64/nvidia/tegra186.dtsi
@@ -142,7 +142,29 @@
 	memory-controller@2c00000 {
 		compatible = "nvidia,tegra186-mc";
 		reg = <0x0 0x02c00000 0x0 0xb0000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+		/*
+		 * Memory clients have access to all 40 bits that the memory
+		 * controller can address.
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		emc: external-memory-controller@2c60000 {
+			compatible = "nvidia,tegra186-emc";
+			reg = <0x0 0x02c60000 0x0 0x50000>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_EMC>;
+			clock-names = "emc";
+
+			nvidia,bpmp = <&bpmp>;
+		};
 	};
 
 	uarta: serial@3100000 {
@@ -524,12 +546,9 @@
 		reg = <0x0 0x03530000 0x0 0x8000>,
 		      <0x0 0x03538000 0x0 0x1000>;
 		reg-names = "hcd", "fpci";
-
-		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
-
 		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
 			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
 			 <&bpmp TEGRA186_CLK_XUSB_SS>,
@@ -542,16 +561,15 @@
 		clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
 			      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
-
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
 				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
 		power-domain-names = "xusb_host", "xusb_ss";
-		nvidia,xusb-padctl = <&padctl>;
-
-		status = "disabled";
-
+		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+
+		nvidia,xusb-padctl = <&padctl>;
 	};
 
 	fuse@3820000 {
diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi
index c7f2a20e6b..bdd33ff4e3 100644
--- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi
+++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi
@@ -48,6 +48,10 @@
 			};
 		};
 
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
 		serial@3110000 {
 			status = "okay";
 		};
diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts
index 353a6a2219..985e7d84f1 100644
--- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts
+++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts
@@ -152,7 +152,7 @@
 			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
 				       GPIO_ACTIVE_LOW>;
 			linux,input-type = <EV_KEY>;
-			linux,code = <BTN_1>;
+			linux,code = <KEY_SLEEP>;
 			debounce-interval = <10>;
 		};
 
diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi
index 11220d97ad..ccac43be12 100644
--- a/dts/src/arm64/nvidia/tegra194.dtsi
+++ b/dts/src/arm64/nvidia/tegra194.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/power/tegra194-powergate.h>
 #include <dt-bindings/reset/tegra194-reset.h>
 #include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
+#include <dt-bindings/memory/tegra194-mc.h>
 
 / {
 	compatible = "nvidia,tegra194";
@@ -21,6 +22,12 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		misc@100000 {
+			compatible = "nvidia,tegra194-misc";
+			reg = <0x00100000 0xf000>,
+			      <0x0010f000 0x1000>;
+		};
+
 		gpio: gpio@2200000 {
 			compatible = "nvidia,tegra194-gpio";
 			reg-names = "security", "gpio";
@@ -164,6 +171,48 @@
 			};
 		};
 
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra194-mc";
+			reg = <0x02c00000 0x100000>,
+			      <0x02b80000 0x040000>,
+			      <0x01700000 0x100000>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra194-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				clocks = <&bpmp TEGRA194_CLK_EMC>;
+				clock-names = "emc";
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x40>;
@@ -488,6 +537,13 @@
 			status = "disabled";
 		};
 
+		fuse@3820000 {
+			compatible = "nvidia,tegra194-efuse";
+			reg = <0x03820000 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "fuse";
+		};
+
 		gic: interrupt-controller@3881000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
index 90381d52ac..9101d3a39c 100644
--- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
+++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts
@@ -536,6 +536,19 @@
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	sdhci@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+
+		vqmmc-supply = <&vdd_1v8>;
+		vmmc-supply = <&vdd_3v3_sys>;
+
+		non-removable;
+		cap-sdio-irq;
+		keep-power-in-suspend;
+		wakeup-source;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -573,6 +586,66 @@
 		};
 	};
 
+	fan: fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/dts/src/arm64/qcom/apq8016-sbc-pmic-pins.dtsi b/dts/src/arm64/qcom/apq8016-sbc-pmic-pins.dtsi
index ec2f0de679..aff218c1b7 100644
--- a/dts/src/arm64/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/dts/src/arm64/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -8,6 +8,15 @@
 		pinconf {
 			pins = "gpio3";
 			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_hub_reset_pm_device: usb_hub_reset_pm_device {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};
 	};
@@ -22,6 +31,16 @@
 		};
 	};
 
+	usb_sw_sel_pm_device: usb_sw_sel_pm_device {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-low;
+		};
+	};
+
 	pm8916_gpios_leds: pm8916_gpios_leds {
 		pinconf {
 			pins = "gpio1", "gpio2";
diff --git a/dts/src/arm64/qcom/apq8016-sbc.dtsi b/dts/src/arm64/qcom/apq8016-sbc.dtsi
index e12a36ce5d..037e26b3f8 100644
--- a/dts/src/arm64/qcom/apq8016-sbc.dtsi
+++ b/dts/src/arm64/qcom/apq8016-sbc.dtsi
@@ -358,14 +358,15 @@
 		};
 
 		usb@78d9000 {
-			extcon = <&usb_id>;
+			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
 			adp-disable;
 			hnp-disable;
 			srp-disable;
-			dr_mode = "host";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_sw_sel_pm>;
+			dr_mode = "otg";
+			pinctrl-names = "default", "device";
+			pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+			pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
 			ulpi {
 				phy {
 					v1p8-supply = <&pm8916_l7>;
@@ -504,7 +505,7 @@
 
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
-		vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
diff --git a/dts/src/arm64/qcom/apq8096-db820c-pins.dtsi b/dts/src/arm64/qcom/apq8096-db820c-pins.dtsi
deleted file mode 100644
index a5cc80d6e8..0000000000
--- a/dts/src/arm64/qcom/apq8096-db820c-pins.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-&msmgpio {
-	sdc2_cd_on: sdc2_cd_on {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <16>;	/* 16 MA */
-		};
-	};
-
-	sdc2_cd_off: sdc2_cd_off {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
-	};
-
-	blsp1_uart1_default: blsp1_uart1_default {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "blsp_uart2";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart1_sleep: blsp1_uart1_sleep {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	hdmi_hpd_active: hdmi_hpd_active {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-
-	hdmi_hpd_suspend: hdmi_hpd_suspend {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <2>;
-		};
-	};
-
-	hdmi_ddc_active: hdmi_ddc_active {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	hdmi_ddc_suspend: hdmi_ddc_suspend {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
diff --git a/dts/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi b/dts/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi
deleted file mode 100644
index 31a3e3311a..0000000000
--- a/dts/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-&pm8994_gpios {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
-	ls_exp_gpio_f: pm8994_gpio5 {
-		pinconf {
-			pins = "gpio5";
-			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
-		};
-	};
-
-	bt_en_gpios: bt_en_gpios {
-		pinconf {
-			pins = "gpio19";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	wlan_en_gpios: wlan_en_gpios {
-		pinconf {
-			pins = "gpio8";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	audio_mclk: clk_div1 {
-		pinconf {
-			pins = "gpio15";
-			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	volume_up_gpio: pm8996_gpio2 {
-		pinconf {
-			pins = "gpio2";
-			function = "normal";
-			input-enable;
-			drive-push-pull;
-			bias-pull-up;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	divclk4_pin_a: divclk4 {
-		pinconf {
-			pins = "gpio18";
-			function = PMIC_GPIO_FUNC_FUNC2;
-
-			bias-disable;
-			power-source = <PM8994_GPIO_S4>;
-		};
-	};
-
-	usb3_vbus_det_gpio: pm8996_gpio22 {
-		pinconf {
-			pins = "gpio22";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
-
-&pmi8994_gpios {
-	usb2_vbus_det_gpio: pmi8996_gpio6 {
-		pinconf {
-			pins = "gpio6";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi
index dba3488492..fff6115f26 100644
--- a/dts/src/arm64/qcom/apq8096-db820c.dtsi
+++ b/dts/src/arm64/qcom/apq8096-db820c.dtsi
@@ -6,10 +6,9 @@
 #include "msm8996.dtsi"
 #include "pm8994.dtsi"
 #include "pmi8994.dtsi"
-#include "apq8096-db820c-pins.dtsi"
-#include "apq8096-db820c-pmic-pins.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 
@@ -78,611 +77,837 @@
 		};
 	};
 
-	soc {
-		serial@7570000 {
-			label = "BT-UART";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart1_default>;
-			pinctrl-1 = <&blsp1_uart1_sleep>;
-
-			bluetooth {
-				compatible = "qcom,qca6174-bt";
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
 
-				/* bt_disable_n gpio */
-				enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
 
-				clocks = <&divclk4>;
-			};
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
 		};
+	};
 
-		serial@75b0000 {
-			label = "LS-UART1";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_2pins_default>;
-			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
-		};
-
-		serial@75b1000 {
-			label = "LS-UART0";
-			status = "disabled";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart2_4pins_default>;
-			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
-		};
-
-		i2c@7577000 {
-		/* On Low speed expansion */
-			label = "LS-I2C0";
-			status = "okay";
-		};
-
-		i2c@75b6000 {
-		/* On Low speed expansion */
-			label = "LS-I2C1";
-			status = "okay";
-		};
-
-		spi@7575000 {
-		/* On Low speed expansion */
-			label = "LS-SPI0";
-			status = "okay";
-		};
-
-		i2c@75b5000 {
-		/* On High speed expansion */
-			label = "HS-I2C2";
-			status = "okay";
-		};
-
-		spi@75ba000{
-		/* On High speed expansion */
-			label = "HS-SPI1";
-			status = "okay";
-		};
-
-		sdhci@74a4900 {
-		/* External SD card */
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-			cd-gpios = <&msmgpio 38 0x1>;
-			vmmc-supply = <&pm8994_l21>;
-			vqmmc-supply = <&pm8994_l13>;
-			status = "okay";
-		};
-
-		phy@627000 {
-			status = "okay";
-		};
-
-		ufshc@624000 {
-			status = "okay";
-		};
-
-		pinctrl@1010000 {
-			gpio-line-names =
-				"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
-				"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
-				"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
-				"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
-				"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
-				"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
-				"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
-				"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
-				"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
-				"TP93", /* GPIO_9 */
-				"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
-				"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
-				"NC", /* GPIO_12 */
-				"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
-				"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
-				"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
-				"TP99", /* GPIO_16 */
-				"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
-				"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
-				"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
-				"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
-				"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
-				"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
-				"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
-				"GPIO-D", /* GPIO_24, LSEC pin 26 */
-				"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
-				"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
-				"BLSP6_I2C_SDA", /* GPIO_27 */
-				"BLSP6_I2C_SCL", /* GPIO_28 */
-				"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
-				"GPIO30", /* GPIO_30, S HSEC pin 4 */
-				"HDMI_CEC", /* GPIO_31 */
-				"HDMI_DDC_CLOCK", /* GPIO_32 */
-				"HDMI_DDC_DATA", /* GPIO_33 */
-				"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
-				"PCIE0_RST_N", /* GPIO_35 */
-				"PCIE0_CLKREQ_N", /* GPIO_36 */
-				"PCIE0_WAKE", /* GPIO_37 */
-				"SD_CARD_DET_N", /* GPIO_38 */
-				"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
-				"W_DISABLE_N", /* GPIO_40 */
-				"[BLSP9_UART_TX]", /* GPIO_41 */
-				"[BLSP9_UART_RX]", /* GPIO_42 */
-				"[BLSP2_UART_CTS_N]", /* GPIO_43 */
-				"[BLSP2_UART_RFR_N]", /* GPIO_44 */
-				"[BLSP3_UART_TX]", /* GPIO_45 */
-				"[BLSP3_UART_RX]", /* GPIO_46 */
-				"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
-				"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
-				"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
-				"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
-				"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
-				"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
-				"[CODEC_INT1_N]", /* GPIO_53 */
-				"[CODEC_INT2_N]", /* GPIO_54 */
-				"[BLSP7_I2C_SDA]", /* GPIO_55 */
-				"[BLSP7_I2C_SCL]", /* GPIO_56 */
-				"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
-				"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
-				"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
-				"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
-				"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
-				"GPIO-E", /* GPIO_62, LSEC pin 27 */
-				"TP87", /* GPIO_63 */
-				"[CODEC_RST_N]", /* GPIO_64 */
-				"[PCM1_CLK]", /* GPIO_65 */
-				"[PCM1_SYNC]", /* GPIO_66 */
-				"[PCM1_DIN]", /* GPIO_67 */
-				"[PCM1_DOUT]", /* GPIO_68 */
-				"AUDIO_REF_CLK", /* GPIO_69 */
-				"SLIMBUS_CLK", /* GPIO_70 */
-				"SLIMBUS_DATA0", /* GPIO_71 */
-				"SLIMBUS_DATA1", /* GPIO_72 */
-				"NC", /* GPIO_73 */
-				"NC", /* GPIO_74 */
-				"NC", /* GPIO_75 */
-				"NC", /* GPIO_76 */
-				"TP94", /* GPIO_77 */
-				"NC", /* GPIO_78 */
-				"TP95", /* GPIO_79 */
-				"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
-				"TP88", /* GPIO_81 */
-				"TP89", /* GPIO_82 */
-				"TP90", /* GPIO_83 */
-				"TP91", /* GPIO_84 */
-				"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
-				"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
-				"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
-				"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
-				"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
-				"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
-				"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
-				"NC", /* GPIO_92 */
-				"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
-				"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
-				"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
-				"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
-				"NC", /* GPIO_97 */
-				"CAM1_STANDBY_N", /* GPIO_98 */
-				"NC", /* GPIO_99 */
-				"NC", /* GPIO_100 */
-				"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
-				"BOOT_CONFIG1", /* GPIO_102 */
-				"USB_HUB_RESET", /* GPIO_103 */
-				"CAM1_RST_N", /* GPIO_104 */
-				"NC", /* GPIO_105 */
-				"NC", /* GPIO_106 */
-				"NC", /* GPIO_107 */
-				"NC", /* GPIO_108 */
-				"NC", /* GPIO_109 */
-				"NC", /* GPIO_110 */
-				"NC", /* GPIO_111 */
-				"NC", /* GPIO_112 */
-				"PMI8994_BUA", /* GPIO_113 */
-				"PCIE2_RST_N", /* GPIO_114 */
-				"PCIE2_CLKREQ_N", /* GPIO_115 */
-				"PCIE2_WAKE", /* GPIO_116 */
-				"SSC_IRQ_0", /* GPIO_117 */
-				"SSC_IRQ_1", /* GPIO_118 */
-				"SSC_IRQ_2", /* GPIO_119 */
-				"NC", /* GPIO_120 */
-				"GPIO121", /* GPIO_121, S HSEC pin 2 */
-				"NC", /* GPIO_122 */
-				"SSC_IRQ_6", /* GPIO_123 */
-				"SSC_IRQ_7", /* GPIO_124 */
-				"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
-				"BOOT_CONFIG5", /* GPIO_126 */
-				"NC", /* GPIO_127 */
-				"NC", /* GPIO_128 */
-				"BOOT_CONFIG7", /* GPIO_129 */
-				"PCIE1_RST_N", /* GPIO_130 */
-				"PCIE1_CLKREQ_N", /* GPIO_131 */
-				"PCIE1_WAKE", /* GPIO_132 */
-				"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
-				"NC", /* GPIO_134 */
-				"NC", /* GPIO_135 */
-				"BOOT_CONFIG8", /* GPIO_136 */
-				"NC", /* GPIO_137 */
-				"NC", /* GPIO_138 */
-				"GPS_SSBI2", /* GPIO_139 */
-				"GPS_SSBI1", /* GPIO_140 */
-				"NC", /* GPIO_141 */
-				"NC", /* GPIO_142 */
-				"NC", /* GPIO_143 */
-				"BOOT_CONFIG6", /* GPIO_144 */
-				"NC", /* GPIO_145 */
-				"NC", /* GPIO_146 */
-				"NC", /* GPIO_147 */
-				"NC", /* GPIO_148 */
-				"NC"; /* GPIO_149 */
-		};
-
-		qcom,spmi@400f000 {
-			pmic@0 {
-				gpios@c000 {
-					gpio-line-names =
-						"NC",
-						"KEY_VOLP_N",
-						"NC",
-						"BL1_PWM",
-						"GPIO-F", /* BL0_PWM, LSEC pin 28 */
-						"BL1_EN",
-						"NC",
-						"WLAN_EN",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"DIVCLK1",
-						"DIVCLK2",
-						"DIVCLK3",
-						"DIVCLK4",
-						"BT_EN",
-						"PMIC_SLB",
-						"PMIC_BUA",
-						"USB_VBUS_DET";
-				};
-
-				mpps@a000 {
-					gpio-line-names =
-						"VDDPX_BIAS",
-						"WIFI_LED",
-						"NC",
-						"BT_LED",
-						"PM_MPP05",
-						"PM_MPP06",
-						"PM_MPP07",
-						"NC";
-				};
-			};
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
 
-			pmic@2 {
-				gpios@c000 {
-					gpio-line-names =
-						"NC",
-						"SPKR_AMP_EN1",
-						"SPKR_AMP_EN2",
-						"TP61",
-						"NC",
-						"USB2_VBUS_DET",
-						"NC",
-						"NC",
-						"NC",
-						"NC";
-				};
-			};
-		};
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
 
-		phy@34000 {
-			status = "okay";
-		};
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s8a_l3a_input: vreg-s8a-l3a-input {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s8a_l3a_input";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c2 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	label = "BT-UART";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp1_uart1_default>;
+	pinctrl-1 = <&blsp1_uart1_sleep>;
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c0 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&blsp2_spi5 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&blsp2_uart1 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart1_2pins_default>;
+	pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&blsp2_uart2 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_4pins_default>;
+	pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
 
-		phy@7410000 {
-			status = "okay";
+&msmgpio {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+		"TP93", /* GPIO_9 */
+		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+		"NC", /* GPIO_12 */
+		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+		"TP99", /* GPIO_16 */
+		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+		"GPIO-D", /* GPIO_24, LSEC pin 26 */
+		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+		"BLSP6_I2C_SDA", /* GPIO_27 */
+		"BLSP6_I2C_SCL", /* GPIO_28 */
+		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+		"GPIO30", /* GPIO_30, S HSEC pin 4 */
+		"HDMI_CEC", /* GPIO_31 */
+		"HDMI_DDC_CLOCK", /* GPIO_32 */
+		"HDMI_DDC_DATA", /* GPIO_33 */
+		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+		"PCIE0_RST_N", /* GPIO_35 */
+		"PCIE0_CLKREQ_N", /* GPIO_36 */
+		"PCIE0_WAKE", /* GPIO_37 */
+		"SD_CARD_DET_N", /* GPIO_38 */
+		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+		"W_DISABLE_N", /* GPIO_40 */
+		"[BLSP9_UART_TX]", /* GPIO_41 */
+		"[BLSP9_UART_RX]", /* GPIO_42 */
+		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+		"[BLSP3_UART_TX]", /* GPIO_45 */
+		"[BLSP3_UART_RX]", /* GPIO_46 */
+		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+		"[CODEC_INT1_N]", /* GPIO_53 */
+		"[CODEC_INT2_N]", /* GPIO_54 */
+		"[BLSP7_I2C_SDA]", /* GPIO_55 */
+		"[BLSP7_I2C_SCL]", /* GPIO_56 */
+		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+		"GPIO-E", /* GPIO_62, LSEC pin 27 */
+		"TP87", /* GPIO_63 */
+		"[CODEC_RST_N]", /* GPIO_64 */
+		"[PCM1_CLK]", /* GPIO_65 */
+		"[PCM1_SYNC]", /* GPIO_66 */
+		"[PCM1_DIN]", /* GPIO_67 */
+		"[PCM1_DOUT]", /* GPIO_68 */
+		"AUDIO_REF_CLK", /* GPIO_69 */
+		"SLIMBUS_CLK", /* GPIO_70 */
+		"SLIMBUS_DATA0", /* GPIO_71 */
+		"SLIMBUS_DATA1", /* GPIO_72 */
+		"NC", /* GPIO_73 */
+		"NC", /* GPIO_74 */
+		"NC", /* GPIO_75 */
+		"NC", /* GPIO_76 */
+		"TP94", /* GPIO_77 */
+		"NC", /* GPIO_78 */
+		"TP95", /* GPIO_79 */
+		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+		"TP88", /* GPIO_81 */
+		"TP89", /* GPIO_82 */
+		"TP90", /* GPIO_83 */
+		"TP91", /* GPIO_84 */
+		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+		"NC", /* GPIO_92 */
+		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+		"NC", /* GPIO_97 */
+		"CAM1_STANDBY_N", /* GPIO_98 */
+		"NC", /* GPIO_99 */
+		"NC", /* GPIO_100 */
+		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+		"BOOT_CONFIG1", /* GPIO_102 */
+		"USB_HUB_RESET", /* GPIO_103 */
+		"CAM1_RST_N", /* GPIO_104 */
+		"NC", /* GPIO_105 */
+		"NC", /* GPIO_106 */
+		"NC", /* GPIO_107 */
+		"NC", /* GPIO_108 */
+		"NC", /* GPIO_109 */
+		"NC", /* GPIO_110 */
+		"NC", /* GPIO_111 */
+		"NC", /* GPIO_112 */
+		"PMI8994_BUA", /* GPIO_113 */
+		"PCIE2_RST_N", /* GPIO_114 */
+		"PCIE2_CLKREQ_N", /* GPIO_115 */
+		"PCIE2_WAKE", /* GPIO_116 */
+		"SSC_IRQ_0", /* GPIO_117 */
+		"SSC_IRQ_1", /* GPIO_118 */
+		"SSC_IRQ_2", /* GPIO_119 */
+		"NC", /* GPIO_120 */
+		"GPIO121", /* GPIO_121, S HSEC pin 2 */
+		"NC", /* GPIO_122 */
+		"SSC_IRQ_6", /* GPIO_123 */
+		"SSC_IRQ_7", /* GPIO_124 */
+		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+		"BOOT_CONFIG5", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"NC", /* GPIO_128 */
+		"BOOT_CONFIG7", /* GPIO_129 */
+		"PCIE1_RST_N", /* GPIO_130 */
+		"PCIE1_CLKREQ_N", /* GPIO_131 */
+		"PCIE1_WAKE", /* GPIO_132 */
+		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+		"NC", /* GPIO_134 */
+		"NC", /* GPIO_135 */
+		"BOOT_CONFIG8", /* GPIO_136 */
+		"NC", /* GPIO_137 */
+		"NC", /* GPIO_138 */
+		"GPS_SSBI2", /* GPIO_139 */
+		"GPS_SSBI1", /* GPIO_140 */
+		"NC", /* GPIO_141 */
+		"NC", /* GPIO_142 */
+		"NC", /* GPIO_143 */
+		"BOOT_CONFIG6", /* GPIO_144 */
+		"NC", /* GPIO_145 */
+		"NC", /* GPIO_146 */
+		"NC", /* GPIO_147 */
+		"NC", /* GPIO_148 */
+		"NC"; /* GPIO_149 */
+
+	sdc2_cd_on: sdc2_cd_on {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
 		};
 
-		phy@7411000 {
-			status = "okay";
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
 		};
+	};
 
-		phy@7412000 {
-			status = "okay";
+	sdc2_cd_off: sdc2_cd_off {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
 		};
 
-		usb@6af8800 {
-			status = "okay";
-			extcon = <&usb3_id>;
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
 
-			dwc3@6a00000 {
-				extcon = <&usb3_id>;
-				dr_mode = "otg";
-			};
+	blsp1_uart1_default: blsp1_uart1_default {
+		mux {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "blsp_uart2";
 		};
 
-		usb3_id: usb3-id {
-			compatible = "linux,extcon-usb-gpio";
-			id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb3_vbus_det_gpio>;
+		config {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <16>;
+			bias-disable;
 		};
+	};
 
-		usb@76f8800 {
-			status = "okay";
-			extcon = <&usb2_id>;
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		mux {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			function = "gpio";
+		};
 
-			dwc3@7600000 {
-				extcon = <&usb2_id>;
-				dr_mode = "otg";
-				maximum-speed = "high-speed";
-			};
+		config {
+			pins = "gpio41", "gpio42", "gpio43", "gpio44";
+			drive-strength = <2>;
+			bias-disable;
 		};
+	};
 
-		usb2_id: usb2-id {
-			compatible = "linux,extcon-usb-gpio";
-			id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb2_vbus_det_gpio>;
+	hdmi_hpd_active: hdmi_hpd_active {
+		mux {
+			pins = "gpio34";
+			function = "hdmi_hot";
 		};
 
-		wlan_en: wlan-en-1-8v {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_en_gpios>;
-			compatible = "regulator-fixed";
-			regulator-name = "wlan-en-regulator";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+		config {
+			pins = "gpio34";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
 
-			gpio = <&pm8994_gpios 8 0>;
+	hdmi_hpd_suspend: hdmi_hpd_suspend {
+		mux {
+			pins = "gpio34";
+			function = "hdmi_hot";
+		};
 
-			/* WLAN card specific delay */
-			startup-delay-us = <70000>;
-			enable-active-high;
+		config {
+			pins = "gpio34";
+			bias-pull-down;
+			drive-strength = <2>;
 		};
+	};
 
-		agnoc@0 {
-			pcie@600000 {
-				status = "okay";
-				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-				vddpe-3v3-supply = <&wlan_en>;
-			};
+	hdmi_ddc_active: hdmi_ddc_active {
+		mux {
+			pins = "gpio32", "gpio33";
+			function = "hdmi_ddc";
+		};
 
-			pcie@608000 {
-				status = "okay";
-				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
-			};
+		config {
+			pins = "gpio32", "gpio33";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
 
-			pcie@610000 {
-				status = "okay";
-				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
-			};
+	hdmi_ddc_suspend: hdmi_ddc_suspend {
+		mux {
+			pins = "gpio32", "gpio33";
+			function = "hdmi_ddc";
 		};
 
-		slim_msm: slim@91c0000 {
-			ngd@1 {
-				wcd9335: codec@1{
-					clock-names = "mclk", "slimbus";
-					clocks = <&div1_mclk>,
-						 <&rpmcc RPM_SMD_BB_CLK1>;
-				};
-			};
+		config {
+			pins = "gpio32", "gpio33";
+			drive-strength = <2>;
+			bias-pull-down;
 		};
+	};
+};
 
-		mdss@900000 {
-			status = "okay";
+&pcie0 {
+	status = "okay";
+	perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
 
-			mdp@901000 {
-				status = "okay";
-			};
+&pcie1 {
+	status = "okay";
+	perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
 
-			hdmi-phy@9a0600 {
-				status = "okay";
+&pcie2 {
+	status = "okay";
+	perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
 
-				vddio-supply = <&pm8994_l12>;
-				vcca-supply = <&pm8994_l28>;
-				#phy-cells = <0>;
-			};
+&pcie_phy {
+	status = "okay";
 
-			hdmi-tx@9a0000 {
-				status = "okay";
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
 
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-				pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"BL1_PWM",
+		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+		"BL1_EN",
+		"NC",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"DIVCLK1",
+		"DIVCLK2",
+		"DIVCLK3",
+		"DIVCLK4",
+		"BT_EN",
+		"PMIC_SLB",
+		"PMIC_BUA",
+		"USB_VBUS_DET";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+	ls_exp_gpio_f: pm8994_gpio5 {
+		pinconf {
+			pins = "gpio5";
+			output-low;
+			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+		};
+	};
 
-				core-vdda-supply = <&pm8994_l12>;
-				core-vcc-supply = <&pm8994_s4>;
-			};
+	bt_en_gpios: bt_en_gpios {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
 		};
 	};
 
+	wlan_en_gpios: wlan_en_gpios {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
+	audio_mclk: clk_div1 {
+		pinconf {
+			pins = "gpio15";
+			function = "func1";
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&volume_up_gpio>;
+	volume_up_gpio: pm8996_gpio2 {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
+		};
+	};
 
-		button@0 {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+	divclk4_pin_a: divclk4 {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
 		};
 	};
 
-	rpm-glink {
-		rpm_requests {
-			pm8994-regulators {
-				vdd_l1-supply = <&pm8994_s3>;
-				vdd_l2_l26_l28-supply = <&pm8994_s3>;
-				vdd_l3_l11-supply = <&pm8994_s3>;
-				vdd_l4_l27_l31-supply = <&pm8994_s3>;
-				vdd_l5_l7-supply = <&pm8994_s5>;
-				vdd_l14_l15-supply = <&pm8994_s5>;
-				vdd_l20_l21-supply = <&pm8994_s5>;
-				vdd_l25-supply = <&pm8994_s3>;
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				/**
-				 * 1.8v required on LS expansion
-				 * for mezzanine boards
-				 */
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-				s7 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-				l3 {
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <850000>;
-				};
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-				l6 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l11 {
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-				};
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-				};
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-				};
-				l17 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-				};
-				l18 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2900000>;
-				};
-				l19 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-allow-set-load;
-				};
-				l21 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-allow-set-load;
-					regulator-system-load = <200000>;
-				};
-				l22 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-allow-set-load;
-				};
-				l27 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-				l28 {
-					regulator-min-microvolt = <925000>;
-					regulator-max-microvolt = <925000>;
-					regulator-allow-set-load;
-				};
-				l29 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-				l30 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-				l32 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
+	usb3_vbus_det_gpio: pm8996_gpio22 {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
 		};
 	};
 };
 
-&spmi_bus {
-	pmic@0 {
-		pon@800 {
-			resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
+&pm8994_mpps {
+	gpio-line-names =
+		"VDDPX_BIAS",
+		"WIFI_LED",
+		"NC",
+		"BT_LED",
+		"PM_MPP05",
+		"PM_MPP06",
+		"PM_MPP07",
+		"NC";
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	s11 {
+		qcom,saw-leader;
+		regulator-always-on;
+		regulator-min-microvolt = <1230000>;
+		regulator-max-microvolt = <1230000>;
+	};
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",
+		"SPKR_AMP_EN1",
+		"SPKR_AMP_EN2",
+		"TP61",
+		"NC",
+		"USB2_VBUS_DET",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+
+	usb2_vbus_det_gpio: pmi8996_gpio6 {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; // 1.8V
 		};
 	};
 };
 
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s8a_l3a_input>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/**
+		 * 1.8v required on LS expansion
+		 * for mezzanine boards
+		 */
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+};
+
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+	cd-gpios = <&msmgpio 38 0x1>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+	status = "okay";
+};
+
 &sound {
 	compatible = "qcom,apq8096-sndcard";
 	model = "DB820c";
@@ -754,3 +979,84 @@
 		};
 	};
 };
+
+&spmi_bus {
+	pmic@0 {
+		pon@800 {
+			resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	vdda-phy-max-microamp = <18380>;
+	vdda-pll-max-microamp = <9440>;
+
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+	vddp-ref-clk-max-microamp = <100>;
+	vddp-ref-clk-always-on;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+
+	dwc3@7600000 {
+		extcon = <&usb2_id>;
+		dr_mode = "otg";
+		maximum-speed = "high-speed";
+	};
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+
+	dwc3@6a00000 {
+		extcon = <&usb3_id>;
+		dr_mode = "otg";
+	};
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+};
+
+&wcd9335 {
+	clock-names = "mclk", "slimbus";
+	clocks = <&div1_mclk>,
+		 <&rpmcc RPM_SMD_BB_CLK1>;
+
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
diff --git a/dts/src/arm64/qcom/apq8096-ifc6640.dts b/dts/src/arm64/qcom/apq8096-ifc6640.dts
new file mode 100644
index 0000000000..f6ddf17ada
--- /dev/null
+++ b/dts/src/arm64/qcom/apq8096-ifc6640.dts
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Inforce 6640 Single Board Computer";
+	compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	qcom,msm-id = <291 0x00030001>;
+	qcom,board-id = <0x00010018 0>;
+
+	aliases {
+		serial0 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v1p05: v1p05-regulator {
+		compatible = "regulator-fixed";
+		reglator-name = "v1p05";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&v5p0>;
+	};
+
+	v12_poe: v12-poe-regulator {
+		compatible = "regulator-fixed";
+		reglator-name = "v12_poe";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	v3p3: v3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3p3";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	v5p0: v5p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v5p0";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart1_2pins_default>;
+	pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&msmgpio {
+	sdc2_pins_default: sdc2-pins-default {
+		clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		cd {
+			pins = "gpio38";
+			function = "gpio";
+
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+
+	sdc2_pins_sleep: sdc2-pins-sleep {
+		clk {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		cd {
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+
+	bus-width = <4>;
+
+	cd-gpios = <&msmgpio 38 0x1>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_pins_default>;
+	pinctrl-1 = <&sdc2_pins_sleep>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	vdda-phy-max-microamp = <18380>;
+	vdda-pll-max-microamp = <9440>;
+};
diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi
index 8686e10190..9f31064f23 100644
--- a/dts/src/arm64/qcom/msm8916.dtsi
+++ b/dts/src/arm64/qcom/msm8916.dtsi
@@ -102,10 +102,11 @@
 			reg = <0x0>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
 		};
 
 		CPU1: cpu@1 {
@@ -114,10 +115,11 @@
 			reg = <0x1>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
 		};
 
 		CPU2: cpu@2 {
@@ -126,10 +128,11 @@
 			reg = <0x2>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
 		};
 
 		CPU3: cpu@3 {
@@ -138,10 +141,11 @@
 			reg = <0x3>;
 			next-level-cache = <&L2_0>;
 			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
 		};
 
 		L2_0: l2-cache {
@@ -161,12 +165,57 @@
 				min-residency-us = <2000>;
 				local-timer-stop;
 			};
+
+			CLUSTER_RET: cluster-retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000012>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWRDN: cluster-gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000032>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
 		};
 	};
 
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: cpu-pd0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu-pd1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu-pd2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu-pd3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cluster-pd {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+		};
 	};
 
 	pmu {
@@ -429,7 +478,8 @@
 			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
 			reg = <0xb011000 0x1000>;
 			#mbox-cells = <1>;
-			clocks = <&a53pll>;
+			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
 			#clock-cells = <0>;
 		};
 
@@ -816,6 +866,8 @@
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 
diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi
index 4ca2e7b445..7ae082ea14 100644
--- a/dts/src/arm64/qcom/msm8996.dtsi
+++ b/dts/src/arm64/qcom/msm8996.dtsi
@@ -16,72 +16,19 @@
 
 	chosen { };
 
-	memory {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the reg */
-		reg = <0 0 0 0>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		mba_region: mba@91500000 {
-			reg = <0x0 0x91500000 0x0 0x200000>;
-			no-map;
-		};
-
-		slpi_region: slpi@90b00000 {
-			reg = <0x0 0x90b00000 0x0 0xa00000>;
-			no-map;
-		};
-
-		venus_region: venus@90400000 {
-			reg = <0x0 0x90400000 0x0 0x700000>;
-			no-map;
-		};
-
-		adsp_region: adsp@8ea00000 {
-			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
-			no-map;
-		};
-
-		mpss_region: mpss@88800000 {
-			reg = <0x0 0x88800000 0x0 0x6200000>;
-			no-map;
-		};
-
-		smem_mem: smem-mem@86000000 {
-			reg = <0x0 0x86000000 0x0 0x200000>;
-			no-map;
-		};
-
-		memory@85800000 {
-			reg = <0x0 0x85800000 0x0 0x800000>;
-			no-map;
-		};
-
-		memory@86200000 {
-			reg = <0x0 0x86200000 0x0 0x2600000>;
-			no-map;
-		};
-
-		rmtfs@86700000 {
-			compatible = "qcom,rmtfs-mem";
-
-			size = <0x0 0x200000>;
-			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <15>;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
 		};
 
-		zap_shader_region: gpu@8f200000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x90b00000 0x0 0xa00000>;
-			no-map;
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
 		};
 	};
 
@@ -173,291 +120,93 @@
 		};
 	};
 
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 3>;
-
-			trips {
-				cpu0_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu0_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 5>;
-
-			trips {
-				cpu1_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu1_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 8>;
-
-			trips {
-				cpu2_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu2_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 10>;
-
-			trips {
-				cpu3_alert0: trip-point@0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu3_crit: cpu_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 6>;
-
-			trips {
-				gpu1_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8996";
+			qcom,dload-mode = <&tcsr 0x13000>;
 		};
+	};
 
-		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 7>;
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
 
-			trips {
-				gpu2_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
 
-		m4m-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
 
-			thermal-sensors = <&tsens0 1>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-			trips {
-				m4m_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mba_region: mba@91500000 {
+			reg = <0x0 0x91500000 0x0 0x200000>;
+			no-map;
 		};
 
-		l3-or-venus-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 2>;
-
-			trips {
-				l3_or_venus_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		slpi_region: slpi@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0xa00000>;
+			no-map;
 		};
 
-		cluster0-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 7>;
-
-			trips {
-				cluster0_l2_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		venus_region: venus@90400000 {
+			reg = <0x0 0x90400000 0x0 0x700000>;
+			no-map;
 		};
 
-		cluster1-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 12>;
-
-			trips {
-				cluster1_l2_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		adsp_region: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+			no-map;
 		};
 
-		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 1>;
-
-			trips {
-				camera_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mpss_region: mpss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x6200000>;
+			no-map;
 		};
 
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 2>;
-
-			trips {
-				q6_dsp_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
 		};
 
-		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 3>;
-
-			trips {
-				mem_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x800000>;
+			no-map;
 		};
 
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 4>;
-
-			trips {
-				modemtx_alert0: trip-point@0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2600000>;
+			no-map;
 		};
-	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
 
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "xo_board";
-		};
+			size = <0x0 0x200000>;
+			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+			no-map;
 
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32764>;
-			clock-output-names = "sleep_clk";
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
 		};
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8996";
 
-			qcom,dload-mode = <&tcsr 0x13000>;
+		zap_shader_region: gpu@8f200000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x90b00000 0x0 0xa00000>;
+			no-map;
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
 	rpm-glink {
 		compatible = "qcom,glink-rpm";
 
@@ -467,7 +216,7 @@
 
 		mboxes = <&apcs_glb 0>;
 
-		rpm_requests {
+		rpm_requests: rpm-requests {
 			compatible = "qcom,rpm-msm8996";
 			qcom,glink-channels = "rpm_requests";
 
@@ -509,57 +258,83 @@
 					};
 				};
 			};
+		};
+	};
 
-			pm8994-regulators {
-				compatible = "qcom,rpm-pm8994-regulators";
-
-				pm8994_s1: s1 {};
-				pm8994_s2: s2 {};
-				pm8994_s3: s3 {};
-				pm8994_s4: s4 {};
-				pm8994_s5: s5 {};
-				pm8994_s6: s6 {};
-				pm8994_s7: s7 {};
-				pm8994_s8: s8 {};
-				pm8994_s9: s9 {};
-				pm8994_s10: s10 {};
-				pm8994_s11: s11 {};
-				pm8994_s12: s12 {};
-
-				pm8994_l1: l1 {};
-				pm8994_l2: l2 {};
-				pm8994_l3: l3 {};
-				pm8994_l4: l4 {};
-				pm8994_l5: l5 {};
-				pm8994_l6: l6 {};
-				pm8994_l7: l7 {};
-				pm8994_l8: l8 {};
-				pm8994_l9: l9 {};
-				pm8994_l10: l10 {};
-				pm8994_l11: l11 {};
-				pm8994_l12: l12 {};
-				pm8994_l13: l13 {};
-				pm8994_l14: l14 {};
-				pm8994_l15: l15 {};
-				pm8994_l16: l16 {};
-				pm8994_l17: l17 {};
-				pm8994_l18: l18 {};
-				pm8994_l19: l19 {};
-				pm8994_l20: l20 {};
-				pm8994_l21: l21 {};
-				pm8994_l22: l22 {};
-				pm8994_l23: l23 {};
-				pm8994_l24: l24 {};
-				pm8994_l25: l25 {};
-				pm8994_l26: l26 {};
-				pm8994_l27: l27 {};
-				pm8994_l28: l28 {};
-				pm8994_l29: l29 {};
-				pm8994_l30: l30 {};
-				pm8994_l31: l31 {};
-				pm8994_l32: l32 {};
-			};
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
 
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
 		};
 	};
 
@@ -569,9 +344,90 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		pcie_phy: phy@34000 {
+			compatible = "qcom,msm8996-qmp-pcie-phy";
+			reg = <0x00034000 0x488>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+				<&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+			reset-names = "phy", "common", "cfg";
+			status = "disabled";
+
+			pciephy_0: lane@35000 {
+				reg = <0x00035000 0x130>,
+				      <0x00035200 0x200>,
+				      <0x00035400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_0_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+				reset-names = "lane0";
+			};
+
+			pciephy_1: lane@36000 {
+				reg = <0x00036000 0x130>,
+				      <0x00036200 0x200>,
+				      <0x00036400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_1_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe1";
+				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+				reset-names = "lane1";
+			};
+
+			pciephy_2: lane@37000 {
+				reg = <0x00037000 0x130>,
+				      <0x00037200 0x200>,
+				      <0x00037400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_2_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe2";
+				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+				reset-names = "lane2";
+			};
+		};
+
 		rpm_msg_ram: memory@68000 {
 			compatible = "qcom,rpm-msg-ram";
-			reg = <0x68000 0x6000>;
+			reg = <0x00068000 0x6000>;
+		};
+
+		qfprom@74000 {
+			compatible = "qcom,qfprom";
+			reg = <0x00074000 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx_trim@24e {
+				reg = <0x24e 0x2>;
+				bits = <5 4>;
+			};
+
+			qusb2s_hstx_trim: hstx_trim@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 4>;
+			};
+
+			gpu_speed_bin: gpu_speed_bin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
 		};
 
 		rng: rng@83000 {
@@ -581,60 +437,790 @@
 			clock-names = "core";
 		};
 
-		tcsr_mutex_regs: syscon@740000 {
-			compatible = "syscon";
-			reg = <0x740000 0x20000>;
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00300000 0x90000>;
 		};
 
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8996-tsens";
-			reg = <0x4a9000 0x1000>, /* TM */
-			      <0x4a8000 0x1000>; /* SROT */
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
 			#qcom,sensors = <13>;
-			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
 		tsens1: thermal-sensor@4ad000 {
 			compatible = "qcom,msm8996-tsens";
-			reg = <0x4ad000 0x1000>, /* TM */
-			      <0x4ac000 0x1000>; /* SROT */
+			reg = <0x004ad000 0x1000>, /* TM */
+			      <0x004ac000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
+		tcsr_mutex_regs: syscon@740000 {
+			compatible = "syscon";
+			reg = <0x00740000 0x20000>;
+		};
+
 		tcsr: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
-			reg = <0x7a0000 0x18000>;
+			reg = <0x007a0000 0x18000>;
 		};
 
-		intc: interrupt-controller@9bc0000 {
-			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
-			#interrupt-cells = <3>;
+		mmcc: clock-controller@8c0000 {
+			compatible = "qcom,mmcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x008c0000 0x40000>;
+			assigned-clocks = <&mmcc MMPLL9_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <624000000>,
+					       <810000000>,
+					       <980000000>,
+					       <960000000>,
+					       <825000000>;
+		};
+
+		mdss: mdss@900000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x00900000 0x1000>,
+			      <0x009b0000 0x1040>,
+			      <0x009b8000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys",
+				    "vbif_nrt_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
 			interrupt-controller;
-			#redistributor-regions = <1>;
-			redistributor-stride = <0x0 0x40000>;
-			reg = <0x09bc0000 0x10000>,
-			      <0x09c00000 0x100000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>;
+			clock-names = "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: mdp@901000 {
+				compatible = "qcom,mdp5";
+				reg = <0x00901000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc SMMU_MDP_AXI_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "iommu",
+					      "vsync";
+
+				iommus = <&mdp_smmu 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf3_out: endpoint {
+							remote-endpoint = <&hdmi_in>;
+						};
+					};
+				};
+			};
+
+			hdmi: hdmi-tx@9a0000 {
+				compatible = "qcom,hdmi-tx-8996";
+				reg =	<0x009a0000 0x50c>,
+					<0x00070000 0x6158>,
+					<0x009e0000 0xfff>;
+				reg-names = "core_physical",
+					    "qfprom_physical",
+					    "hdcp_physical";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_HDMI_CLK>,
+					 <&mmcc MDSS_HDMI_AHB_CLK>,
+					 <&mmcc MDSS_EXTPCLK_CLK>;
+				clock-names =
+					"mdp_core",
+					"iface",
+					"core",
+					"alt_iface",
+					"extp";
+
+				phys = <&hdmi_phy>;
+				phy-names = "hdmi_phy";
+				#sound-dai-cells = <1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						hdmi_in: endpoint {
+							remote-endpoint = <&mdp5_intf3_out>;
+						};
+					};
+				};
+			};
+
+			hdmi_phy: hdmi-phy@9a0600 {
+				#phy-cells = <0>;
+				compatible = "qcom,hdmi-phy-8996";
+				reg = <0x009a0600 0x1c4>,
+				      <0x009a0a00 0x124>,
+				      <0x009a0c00 0x124>,
+				      <0x009a0e00 0x124>,
+				      <0x009a1000 0x124>,
+				      <0x009a1200 0x0c8>;
+				reg-names = "hdmi_pll",
+					    "hdmi_tx_l0",
+					    "hdmi_tx_l1",
+					    "hdmi_tx_l2",
+					    "hdmi_tx_l3",
+					    "hdmi_phy";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&gcc GCC_HDMI_CLKREF_CLK>;
+				clock-names = "iface",
+					      "ref";
+			};
 		};
+		gpu@b00000 {
+			compatible = "qcom,adreno-530.2", "qcom,adreno";
+			#stream-id-cells = <16>;
 
-		apcs_glb: mailbox@9820000 {
-			compatible = "qcom,msm8996-apcs-hmss-global";
-			reg = <0x9820000 0x1000>;
+			reg = <0x00b00000 0x3f000>;
+			reg-names = "kgsl_3d0_reg_memory";
 
-			#mbox-cells = <1>;
+			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+				<&mmcc GPU_AHB_CLK>,
+				<&mmcc GPU_GX_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+			clock-names = "core",
+				"iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface";
+
+			power-domains = <&mmcc GPU_GDSC>;
+			iommus = <&adreno_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			qcom,gpu-quirk-two-pass-use-wfi;
+			qcom,gpu-quirk-fault-detect-mask;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			gpu_opp_table: opp-table {
+				compatible  ="operating-points-v2";
+
+				/*
+				 * 624Mhz and 560Mhz are only available on speed
+				 * bin (1 << 0). All the rest are available on
+				 * all bins of the hardware
+				 */
+				opp-624000000 {
+					opp-hz = /bits/ 64 <624000000>;
+					opp-supported-hw = <0x01>;
+				};
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0x01>;
+				};
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-401800000 {
+					opp-hz = /bits/ 64 <401800000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-214000000 {
+					opp-hz = /bits/ 64 <214000000>;
+					opp-supported-hw = <0xFF>;
+				};
+				opp-133000000 {
+					opp-hz = /bits/ 64 <133000000>;
+					opp-supported-hw = <0xFF>;
+				};
+			};
+
+			zap-shader {
+				memory-region = <&zap_shader_region>;
+			};
 		};
 
-		gcc: clock-controller@300000 {
-			compatible = "qcom,gcc-msm8996";
-			#clock-cells = <1>;
+		msmgpio: pinctrl@1010000 {
+			compatible = "qcom,msm8996-pinctrl";
+			reg = <0x01010000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		spmi_bus: qcom,spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0400f000 0x1000>,
+			      <0x04400000 0x800000>,
+			      <0x04c00000 0x800000>,
+			      <0x05800000 0x200000>,
+			      <0x0400a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		agnoc@0 {
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+			compatible = "simple-pm-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcie0: pcie@600000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				status = "disabled";
+				power-domains = <&gcc PCIE0_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				reg = <0x00600000 0x2000>,
+				      <0x0c000000 0xf1d>,
+				      <0x0c000f20 0xa8>,
+				      <0x0c100000 0x100000>;
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_0>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+
+				linux,pci-domain = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+					<&gcc GCC_PCIE_0_AUX_CLK>,
+					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+
+			};
+
+			pcie1: pcie@608000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE1_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				status  = "disabled";
+
+				reg = <0x00608000 0x2000>,
+				      <0x0d000000 0xf1d>,
+				      <0x0d000f20 0xa8>,
+				      <0x0d100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_1>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+				linux,pci-domain = <1>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+					<&gcc GCC_PCIE_1_AUX_CLK>,
+					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie2: pcie@610000 {
+				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+				power-domains = <&gcc PCIE2_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+				status = "disabled";
+				reg = <0x00610000 0x2000>,
+				      <0x0e000000 0xf1d>,
+				      <0x0e000f20 0xa8>,
+				      <0x0e100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_2>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
+					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+				linux,pci-domain = <2>;
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+					<&gcc GCC_PCIE_2_AUX_CLK>,
+					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+				clock-names =  "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+		};
+
+		ufshc: ufshc@624000 {
+			compatible = "qcom,ufshc";
+			reg = <0x00624000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			phys = <&ufsphy>;
+			phy-names = "ufsphy";
+
+			power-domains = <&gcc UFS_GDSC>;
+
+			clock-names =
+				"core_clk_src",
+				"core_clk",
+				"bus_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro_src",
+				"core_clk_unipro",
+				"core_clk_ice",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk";
+			clocks =
+				<&gcc UFS_AXI_CLK_SRC>,
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc UFS_ICE_CORE_CLK_SRC>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&gcc GCC_UFS_ICE_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+			freq-table-hz =
+				<100000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<150000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			lanes-per-direction = <1>;
 			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x300000 0x90000>;
+			status = "disabled";
+
+			ufs_variant {
+				compatible = "qcom,ufs_variant";
+			};
+		};
+
+		ufsphy: phy@627000 {
+			compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
+			reg = <0x00627000 0xda8>;
+			reg-names = "phy_mem";
+			#phy-cells = <0>;
+
+			clock-names = "ref_clk_src", "ref_clk";
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_UFS_CLKREF_CLK>;
+			resets = <&ufshc 0>;
+			status = "disabled";
+		};
+
+		camss: camss@a00000 {
+			compatible = "qcom,msm8996-camss";
+			reg = <0x00a34000 0x1000>,
+			      <0x00a00030 0x4>,
+			      <0x00a35000 0x1000>,
+			      <0x00a00038 0x4>,
+			      <0x00a36000 0x1000>,
+			      <0x00a00040 0x4>,
+			      <0x00a30000 0x100>,
+			      <0x00a30400 0x100>,
+			      <0x00a30800 0x100>,
+			      <0x00a30c00 0x100>,
+			      <0x00a31000 0x500>,
+			      <0x00a00020 0x10>,
+			      <0x00a10000 0x1000>,
+			      <0x00a14000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csiphy2",
+				"csiphy2_clk_mux",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0",
+				"vfe1";
+			interrupts = <GIC_SPI 78 0>,
+				<GIC_SPI 79 0>,
+				<GIC_SPI 80 0>,
+				<GIC_SPI 296 0>,
+				<GIC_SPI 297 0>,
+				<GIC_SPI 298 0>,
+				<GIC_SPI 299 0>,
+				<GIC_SPI 309 0>,
+				<GIC_SPI 314 0>,
+				<GIC_SPI 315 0>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"vfe0",
+				"vfe1";
+			power-domains = <&mmcc VFE0_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				<&mmcc CAMSS_ISPIF_AHB_CLK>,
+				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI0_AHB_CLK>,
+				<&mmcc CAMSS_CSI0_CLK>,
+				<&mmcc CAMSS_CSI0PHY_CLK>,
+				<&mmcc CAMSS_CSI0PIX_CLK>,
+				<&mmcc CAMSS_CSI0RDI_CLK>,
+				<&mmcc CAMSS_CSI1_AHB_CLK>,
+				<&mmcc CAMSS_CSI1_CLK>,
+				<&mmcc CAMSS_CSI1PHY_CLK>,
+				<&mmcc CAMSS_CSI1PIX_CLK>,
+				<&mmcc CAMSS_CSI1RDI_CLK>,
+				<&mmcc CAMSS_CSI2_AHB_CLK>,
+				<&mmcc CAMSS_CSI2_CLK>,
+				<&mmcc CAMSS_CSI2PHY_CLK>,
+				<&mmcc CAMSS_CSI2PIX_CLK>,
+				<&mmcc CAMSS_CSI2RDI_CLK>,
+				<&mmcc CAMSS_CSI3_AHB_CLK>,
+				<&mmcc CAMSS_CSI3_CLK>,
+				<&mmcc CAMSS_CSI3PHY_CLK>,
+				<&mmcc CAMSS_CSI3PIX_CLK>,
+				<&mmcc CAMSS_CSI3RDI_CLK>,
+				<&mmcc CAMSS_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_CLK>,
+				<&mmcc CAMSS_CSI_VFE0_CLK>,
+				<&mmcc CAMSS_VFE0_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_STREAM_CLK>,
+				<&mmcc CAMSS_VFE1_CLK>,
+				<&mmcc CAMSS_CSI_VFE1_CLK>,
+				<&mmcc CAMSS_VFE1_AHB_CLK>,
+				<&mmcc CAMSS_VFE1_STREAM_CLK>,
+				<&mmcc CAMSS_VFE_AHB_CLK>,
+				<&mmcc CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csiphy2_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"csi2_ahb",
+				"csi2",
+				"csi2_phy",
+				"csi2_pix",
+				"csi2_rdi",
+				"csi3_ahb",
+				"csi3",
+				"csi3_phy",
+				"csi3_pix",
+				"csi3_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe0_ahb",
+				"vfe0_stream",
+				"vfe1",
+				"csi_vfe1",
+				"vfe1_ahb",
+				"vfe1_stream",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&vfe_smmu 0>,
+				 <&vfe_smmu 1>,
+				 <&vfe_smmu 2>,
+				 <&vfe_smmu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		adreno_smmu: iommu@b40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00b40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&mmcc GPU_AHB_CLK>,
+				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&mmcc GPU_GDSC>;
+		};
+
+		video-codec@c00000 {
+			compatible = "qcom,msm8996-venus";
+			reg = <0x00c00000 0xff000>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc VIDEO_MAXI_CLK>;
+			clock-names = "core", "iface", "bus", "mbus";
+			iommus = <&venus_smmu 0x00>,
+				 <&venus_smmu 0x01>,
+				 <&venus_smmu 0x0a>,
+				 <&venus_smmu 0x07>,
+				 <&venus_smmu 0x0e>,
+				 <&venus_smmu 0x0f>,
+				 <&venus_smmu 0x08>,
+				 <&venus_smmu 0x09>,
+				 <&venus_smmu 0x0b>,
+				 <&venus_smmu 0x0c>,
+				 <&venus_smmu 0x0d>,
+				 <&venus_smmu 0x10>,
+				 <&venus_smmu 0x11>,
+				 <&venus_smmu 0x21>,
+				 <&venus_smmu 0x28>,
+				 <&venus_smmu 0x29>,
+				 <&venus_smmu 0x2b>,
+				 <&venus_smmu 0x2c>,
+				 <&venus_smmu 0x2d>,
+				 <&venus_smmu 0x31>;
+			memory-region = <&venus_region>;
+			status = "okay";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE1_GDSC>;
+			};
+		};
+
+		mdp_smmu: iommu@d00000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d00000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
+				 <&mmcc SMMU_MDP_AXI_CLK>;
+			clock-names = "iface", "bus";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+
+		venus_smmu: iommu@d40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d40000 0x20000>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
+				 <&mmcc SMMU_VIDEO_AXI_CLK>;
+			clock-names = "iface", "bus";
+			#iommu-cells = <1>;
+			status = "okay";
+		};
+
+		vfe_smmu: iommu@da0000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00da0000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+				 <&mmcc SMMU_VFE_AXI_CLK>;
+			clock-names = "iface",
+				      "bus";
+			#iommu-cells = <1>;
+		};
+
+		lpass_q6_smmu: iommu@1600000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x01600000 0x20000>;
+			#iommu-cells = <1>;
+			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+			clock-names = "iface", "bus";
 		};
 
 		stm@3002000 {
@@ -1104,13 +1690,119 @@
 				};
 			};
 		};
-
 		kryocc: clock-controller@6400000 {
 			compatible = "qcom,apcc-msm8996";
-			reg = <0x6400000 0x90000>;
+			reg = <0x06400000 0x90000>;
+			#clock-cells = <1>;
+		};
+
+		usb3: usb@6af8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x06af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				<&gcc GCC_USB30_MASTER_CLK>,
+				<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				<&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				<&gcc GCC_USB30_SLEEP_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			status = "disabled";
+
+			dwc3@6a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x06a00000 0xcc00>;
+				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+			};
+		};
+
+		usb3phy: phy@7410000 {
+			compatible = "qcom,msm8996-qmp-usb3-phy";
+			reg = <0x07410000 0x1c4>;
 			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				<&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+			status = "disabled";
+
+			ssusb_phy_0: lane@7410200 {
+				reg = <0x07410200 0x200>,
+				      <0x07410400 0x130>,
+				      <0x07410600 0x1a8>;
+				#phy-cells = <0>;
+
+				clock-output-names = "usb3_phy_pipe_clk_src";
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+			};
 		};
 
+		hsusb_phy1: phy@7411000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07411000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2p_hstx_trim>;
+			status = "disabled";
+		};
+
+		hsusb_phy2: phy@7412000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07412000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2s_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc2: sdhci@74a4900 {
+			 status = "disabled";
+			 compatible = "qcom,sdhci-msm-v4";
+			 reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+			 reg-names = "hc_mem", "core_mem";
+
+			 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+				      <0 221 IRQ_TYPE_LEVEL_HIGH>;
+			 interrupt-names = "hc_irq", "pwr_irq";
+
+			 clock-names = "iface", "core", "xo";
+			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+			 <&gcc GCC_SDCC2_APPS_CLK>,
+			 <&xo_board>;
+			 bus-width = <4>;
+		 };
+
 		blsp1_uart1: serial@7570000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x07570000 0x1000>;
@@ -1136,16 +1828,16 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c0: i2c@75b5000 {
+		blsp1_i2c2: i2c@7577000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b5000 0x1000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
-				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			reg = <0x07577000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c0_default>;
-			pinctrl-1 = <&blsp2_i2c0_sleep>;
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1153,7 +1845,7 @@
 
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x75b0000 0x1000>;
+			reg = <0x075b0000 0x1000>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
@@ -1161,21 +1853,6 @@
 			status = "disabled";
 		};
 
-		blsp2_i2c1: i2c@75b6000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b6000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
-				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c1_default>;
-			pinctrl-1 = <&blsp2_i2c1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
 		blsp2_uart2: serial@75b1000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x075b1000 0x1000>;
@@ -1186,16 +1863,31 @@
 			status = "disabled";
 		};
 
-		blsp1_i2c2: i2c@7577000 {
+		blsp2_i2c0: i2c@75b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x07577000 0x1000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			reg = <0x075b5000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c2_default>;
-			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-0 = <&blsp2_i2c0_default>;
+			pinctrl-1 = <&blsp2_i2c0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@75b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b6000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -1216,369 +1908,9 @@
 			status = "disabled";
 		};
 
-		sdhc2: sdhci@74a4900 {
-			 status = "disabled";
-			 compatible = "qcom,sdhci-msm-v4";
-			 reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
-			 reg-names = "hc_mem", "core_mem";
-
-			 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
-				      <0 221 IRQ_TYPE_LEVEL_HIGH>;
-			 interrupt-names = "hc_irq", "pwr_irq";
-
-			 clock-names = "iface", "core", "xo";
-			 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-			 <&gcc GCC_SDCC2_APPS_CLK>,
-			 <&xo_board>;
-			 bus-width = <4>;
-		 };
-
-		msmgpio: pinctrl@1010000 {
-			compatible = "qcom,msm8996-pinctrl";
-			reg = <0x01010000 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		timer@9840000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x09840000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@9850000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09850000 0x1000>,
-				      <0x09860000 0x1000>;
-			};
-
-			frame@9870000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09870000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@9880000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09880000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@9890000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09890000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@98a0000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098a0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@98b0000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098b0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@98c0000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098c0000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		spmi_bus: qcom,spmi@400f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x400f000 0x1000>,
-			      <0x4400000 0x800000>,
-			      <0x4c00000 0x800000>,
-			      <0x5800000 0x200000>,
-			      <0x400a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		ufsphy: phy@627000 {
-			compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
-			reg = <0x627000 0xda8>;
-			reg-names = "phy_mem";
-			#phy-cells = <0>;
-
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			vdda-phy-max-microamp = <18380>;
-			vdda-pll-max-microamp = <9440>;
-
-			vddp-ref-clk-supply = <&pm8994_l25>;
-			vddp-ref-clk-max-microamp = <100>;
-			vddp-ref-clk-always-on;
-
-			clock-names = "ref_clk_src", "ref_clk";
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_UFS_CLKREF_CLK>;
-			resets = <&ufshc 0>;
-			status = "disabled";
-		};
-
-		ufshc: ufshc@624000 {
-			compatible = "qcom,ufshc";
-			reg = <0x624000 0x2500>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-
-			phys = <&ufsphy>;
-			phy-names = "ufsphy";
-
-			vcc-supply = <&pm8994_l20>;
-			vccq-supply = <&pm8994_l25>;
-			vccq2-supply = <&pm8994_s4>;
-
-			vcc-max-microamp = <600000>;
-			vccq-max-microamp = <450000>;
-			vccq2-max-microamp = <450000>;
-
-			power-domains = <&gcc UFS_GDSC>;
-
-			clock-names =
-				"core_clk_src",
-				"core_clk",
-				"bus_clk",
-				"bus_aggr_clk",
-				"iface_clk",
-				"core_clk_unipro_src",
-				"core_clk_unipro",
-				"core_clk_ice",
-				"ref_clk",
-				"tx_lane0_sync_clk",
-				"rx_lane0_sync_clk";
-			clocks =
-				<&gcc UFS_AXI_CLK_SRC>,
-				<&gcc GCC_UFS_AXI_CLK>,
-				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
-				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-				<&gcc GCC_UFS_AHB_CLK>,
-				<&gcc UFS_ICE_CORE_CLK_SRC>,
-				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
-				<&gcc GCC_UFS_ICE_CORE_CLK>,
-				<&rpmcc RPM_SMD_LN_BB_CLK>,
-				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
-			freq-table-hz =
-				<100000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<150000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
-
-			lanes-per-direction = <1>;
-			#reset-cells = <1>;
-			status = "disabled";
-
-			ufs_variant {
-				compatible = "qcom,ufs_variant";
-			};
-		};
-
-		mmcc: clock-controller@8c0000 {
-			compatible = "qcom,mmcc-msm8996";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x8c0000 0x40000>;
-			assigned-clocks = <&mmcc MMPLL9_PLL>,
-					  <&mmcc MMPLL1_PLL>,
-					  <&mmcc MMPLL3_PLL>,
-					  <&mmcc MMPLL4_PLL>,
-					  <&mmcc MMPLL5_PLL>;
-			assigned-clock-rates = <624000000>,
-					       <810000000>,
-					       <980000000>,
-					       <960000000>,
-					       <825000000>;
-		};
-
-		qfprom@74000 {
-			compatible = "qcom,qfprom";
-			reg = <0x74000 0x8ff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qusb2p_hstx_trim: hstx_trim@24e {
-				reg = <0x24e 0x2>;
-				bits = <5 4>;
-			};
-
-			qusb2s_hstx_trim: hstx_trim@24f {
-				reg = <0x24f 0x1>;
-				bits = <1 4>;
-			};
-
-			gpu_speed_bin: gpu_speed_bin@133 {
-				reg = <0x133 0x1>;
-				bits = <5 3>;
-			};
-		};
-
-		phy@34000 {
-			compatible = "qcom,msm8996-qmp-pcie-phy";
-			reg = <0x34000 0x488>;
-			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-				<&gcc GCC_PCIE_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			resets = <&gcc GCC_PCIE_PHY_BCR>,
-				<&gcc GCC_PCIE_PHY_COM_BCR>,
-				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-			reset-names = "phy", "common", "cfg";
-			status = "disabled";
-
-			pciephy_0: lane@35000 {
-				reg = <0x035000 0x130>,
-					<0x035200 0x200>,
-					<0x035400 0x1dc>;
-				#phy-cells = <0>;
-
-				clock-output-names = "pcie_0_pipe_clk_src";
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-				reset-names = "lane0";
-			};
-
-			pciephy_1: lane@36000 {
-				reg = <0x036000 0x130>,
-					<0x036200 0x200>,
-					<0x036400 0x1dc>;
-				#phy-cells = <0>;
-
-				clock-output-names = "pcie_1_pipe_clk_src";
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe1";
-				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-				reset-names = "lane1";
-			};
-
-			pciephy_2: lane@37000 {
-				reg = <0x037000 0x130>,
-					<0x037200 0x200>,
-					<0x037400 0x1dc>;
-				#phy-cells = <0>;
-
-				clock-output-names = "pcie_2_pipe_clk_src";
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-				clock-names = "pipe2";
-				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
-				reset-names = "lane2";
-			};
-		};
-
-		phy@7410000 {
-			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x7410000 0x1c4>;
-			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			vdda-phy-supply = <&pm8994_l28>;
-			vdda-pll-supply = <&pm8994_l12>;
-
-			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: lane@7410200 {
-				reg = <0x7410200 0x200>,
-					<0x7410400 0x130>,
-					<0x7410600 0x1a8>;
-				#phy-cells = <0>;
-
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
-		};
-
-		hsusb_phy1: phy@7411000 {
-			compatible = "qcom,msm8996-qusb2-phy";
-			reg = <0x7411000 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			vdda-pll-supply = <&pm8994_l12>;
-			vdda-phy-dpdm-supply = <&pm8994_l24>;
-
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-			nvmem-cells = <&qusb2p_hstx_trim>;
-			status = "disabled";
-		};
-
-		hsusb_phy2: phy@7412000 {
-			compatible = "qcom,msm8996-qusb2-phy";
-			reg = <0x7412000 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			vdda-pll-supply = <&pm8994_l12>;
-			vdda-phy-dpdm-supply = <&pm8994_l24>;
-
-			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
-			nvmem-cells = <&qusb2s_hstx_trim>;
-			status = "disabled";
-		};
-
 		usb2: usb@76f8800 {
 			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-			reg = <0x76f8800 0x400>;
+			reg = <0x076f8800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -1598,424 +1930,19 @@
 
 			dwc3@7600000 {
 				compatible = "snps,dwc3";
-				reg = <0x7600000 0xcc00>;
+				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy2>;
 				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
 			};
 		};
 
-		usb3: usb@6af8800 {
-			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-			reg = <0x6af8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
-				<&gcc GCC_USB30_MASTER_CLK>,
-				<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-				<&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				<&gcc GCC_USB30_SLEEP_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
-
-			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>;
-
-			power-domains = <&gcc USB30_GDSC>;
-			status = "disabled";
-
-			dwc3@6a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x6a00000 0xcc00>;
-				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		vfe_smmu: iommu@da0000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xda0000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
-			clocks = <&mmcc SMMU_VFE_AHB_CLK>,
-				 <&mmcc SMMU_VFE_AXI_CLK>;
-			clock-names = "iface",
-				      "bus";
-			#iommu-cells = <1>;
-		};
-
-		camss: camss@a00000 {
-			compatible = "qcom,msm8996-camss";
-			reg = <0xa34000 0x1000>,
-				<0xa00030 0x4>,
-				<0xa35000 0x1000>,
-				<0xa00038 0x4>,
-				<0xa36000 0x1000>,
-				<0xa00040 0x4>,
-				<0xa30000 0x100>,
-				<0xa30400 0x100>,
-				<0xa30800 0x100>,
-				<0xa30c00 0x100>,
-				<0xa31000 0x500>,
-				<0xa00020 0x10>,
-				<0xa10000 0x1000>,
-				<0xa14000 0x1000>;
-			reg-names = "csiphy0",
-				"csiphy0_clk_mux",
-				"csiphy1",
-				"csiphy1_clk_mux",
-				"csiphy2",
-				"csiphy2_clk_mux",
-				"csid0",
-				"csid1",
-				"csid2",
-				"csid3",
-				"ispif",
-				"csi_clk_mux",
-				"vfe0",
-				"vfe1";
-			interrupts = <GIC_SPI 78 0>,
-				<GIC_SPI 79 0>,
-				<GIC_SPI 80 0>,
-				<GIC_SPI 296 0>,
-				<GIC_SPI 297 0>,
-				<GIC_SPI 298 0>,
-				<GIC_SPI 299 0>,
-				<GIC_SPI 309 0>,
-				<GIC_SPI 314 0>,
-				<GIC_SPI 315 0>;
-			interrupt-names = "csiphy0",
-				"csiphy1",
-				"csiphy2",
-				"csid0",
-				"csid1",
-				"csid2",
-				"csid3",
-				"ispif",
-				"vfe0",
-				"vfe1";
-			power-domains = <&mmcc VFE0_GDSC>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				<&mmcc CAMSS_ISPIF_AHB_CLK>,
-				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI0_AHB_CLK>,
-				<&mmcc CAMSS_CSI0_CLK>,
-				<&mmcc CAMSS_CSI0PHY_CLK>,
-				<&mmcc CAMSS_CSI0PIX_CLK>,
-				<&mmcc CAMSS_CSI0RDI_CLK>,
-				<&mmcc CAMSS_CSI1_AHB_CLK>,
-				<&mmcc CAMSS_CSI1_CLK>,
-				<&mmcc CAMSS_CSI1PHY_CLK>,
-				<&mmcc CAMSS_CSI1PIX_CLK>,
-				<&mmcc CAMSS_CSI1RDI_CLK>,
-				<&mmcc CAMSS_CSI2_AHB_CLK>,
-				<&mmcc CAMSS_CSI2_CLK>,
-				<&mmcc CAMSS_CSI2PHY_CLK>,
-				<&mmcc CAMSS_CSI2PIX_CLK>,
-				<&mmcc CAMSS_CSI2RDI_CLK>,
-				<&mmcc CAMSS_CSI3_AHB_CLK>,
-				<&mmcc CAMSS_CSI3_CLK>,
-				<&mmcc CAMSS_CSI3PHY_CLK>,
-				<&mmcc CAMSS_CSI3PIX_CLK>,
-				<&mmcc CAMSS_CSI3RDI_CLK>,
-				<&mmcc CAMSS_AHB_CLK>,
-				<&mmcc CAMSS_VFE0_CLK>,
-				<&mmcc CAMSS_CSI_VFE0_CLK>,
-				<&mmcc CAMSS_VFE0_AHB_CLK>,
-				<&mmcc CAMSS_VFE0_STREAM_CLK>,
-				<&mmcc CAMSS_VFE1_CLK>,
-				<&mmcc CAMSS_CSI_VFE1_CLK>,
-				<&mmcc CAMSS_VFE1_AHB_CLK>,
-				<&mmcc CAMSS_VFE1_STREAM_CLK>,
-				<&mmcc CAMSS_VFE_AHB_CLK>,
-				<&mmcc CAMSS_VFE_AXI_CLK>;
-			clock-names = "top_ahb",
-				"ispif_ahb",
-				"csiphy0_timer",
-				"csiphy1_timer",
-				"csiphy2_timer",
-				"csi0_ahb",
-				"csi0",
-				"csi0_phy",
-				"csi0_pix",
-				"csi0_rdi",
-				"csi1_ahb",
-				"csi1",
-				"csi1_phy",
-				"csi1_pix",
-				"csi1_rdi",
-				"csi2_ahb",
-				"csi2",
-				"csi2_phy",
-				"csi2_pix",
-				"csi2_rdi",
-				"csi3_ahb",
-				"csi3",
-				"csi3_phy",
-				"csi3_pix",
-				"csi3_rdi",
-				"ahb",
-				"vfe0",
-				"csi_vfe0",
-				"vfe0_ahb",
-				"vfe0_stream",
-				"vfe1",
-				"csi_vfe1",
-				"vfe1_ahb",
-				"vfe1_stream",
-				"vfe_ahb",
-				"vfe_axi";
-			vdda-supply = <&pm8994_l2>;
-			iommus = <&vfe_smmu 0>,
-				 <&vfe_smmu 1>,
-				 <&vfe_smmu 2>,
-				 <&vfe_smmu 3>;
-			status = "disabled";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		adreno_smmu: iommu@b40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xb40000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-
-			clocks = <&mmcc GPU_AHB_CLK>,
-				 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
-			clock-names = "iface", "bus";
-
-			power-domains = <&mmcc GPU_GDSC>;
-		};
-
-		mdp_smmu: iommu@d00000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xd00000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			clocks = <&mmcc SMMU_MDP_AHB_CLK>,
-				 <&mmcc SMMU_MDP_AXI_CLK>;
-			clock-names = "iface", "bus";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-		};
-
-		lpass_q6_smmu: iommu@1600000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0x1600000 0x20000>;
-			#iommu-cells = <1>;
-			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
-				 <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
-			clock-names = "iface", "bus";
-		};
-
-		agnoc@0 {
-			power-domains = <&gcc AGGRE0_NOC_GDSC>;
-			compatible = "simple-pm-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pcie0: pcie@600000 {
-				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
-				status = "disabled";
-				power-domains = <&gcc PCIE0_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-
-				reg = <0x00600000 0x2000>,
-				      <0x0c000000 0xf1d>,
-				      <0x0c000f20 0xa8>,
-				      <0x0c100000 0x100000>;
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_0>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
-
-				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
-				pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
-
-
-				vdda-supply = <&pm8994_l28>;
-
-				linux,pci-domain = <0>;
-
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-					<&gcc GCC_PCIE_0_AUX_CLK>,
-					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-
-				clock-names =  "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-
-			};
-
-			pcie1: pcie@608000 {
-				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
-				power-domains = <&gcc PCIE1_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-
-				status  = "disabled";
-
-				reg = <0x00608000 0x2000>,
-				      <0x0d000000 0xf1d>,
-				      <0x0d000f20 0xa8>,
-				      <0x0d100000 0x100000>;
-
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_1>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
-
-				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
-				pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
-
-
-				vdda-supply = <&pm8994_l28>;
-				linux,pci-domain = <1>;
-
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
-					<&gcc GCC_PCIE_1_AUX_CLK>,
-					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
-
-				clock-names =  "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-
-			pcie2: pcie@610000 {
-				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
-				power-domains = <&gcc PCIE2_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-				status = "disabled";
-				reg = <0x00610000 0x2000>,
-				      <0x0e000000 0xf1d>,
-				      <0x0e000f20 0xa8>,
-				      <0x0e100000 0x100000>;
-
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_2>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
-					<0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
-
-				device_type = "pci";
-
-				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
-				pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
-
-				vdda-supply = <&pm8994_l28>;
-
-				linux,pci-domain = <2>;
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
-					<&gcc GCC_PCIE_2_AUX_CLK>,
-					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
-
-				clock-names =  "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-		};
-
-		slimbam:dma@9184000
-		{
+		slimbam: dma@9184000 {
 			compatible = "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
-			reg = <0x9184000 0x32000>;
+			reg = <0x09184000 0x32000>;
 			num-channels  = <31>;
 			interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
@@ -2025,7 +1952,7 @@
 
 		slim_msm: slim@91c0000 {
 			compatible = "qcom,slim-ngd-v1.5.0";
-			reg = <0x91c0000 0x2C000>;
+			reg = <0x091c0000 0x2C000>;
 			reg-names = "ctrl";
 			interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
 			dmas =	<&slimbam 3>, <&slimbam 4>,
@@ -2060,433 +1987,418 @@
 
 					slim-ifc-dev  = <&tasha_ifd>;
 
-					vdd-buck-supply = <&pm8994_s4>;
-					vdd-buck-sido-supply = <&pm8994_s4>;
-					vdd-tx-supply = <&pm8994_s4>;
-					vdd-rx-supply = <&pm8994_s4>;
-					vdd-io-supply = <&pm8994_s4>;
-
 					#sound-dai-cells = <1>;
 				};
 			};
 		};
 
-		gpu@b00000 {
-			compatible = "qcom,adreno-530.2", "qcom,adreno";
-			#stream-id-cells = <16>;
+		adsp_pil: remoteproc@9300000 {
+			compatible = "qcom,msm8996-adsp-pil";
+			reg = <0x09300000 0x80000>;
 
-			reg = <0xb00000 0x3f000>;
-			reg-names = "kgsl_3d0_reg_memory";
+			interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
 
-			interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
 
-			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
-				<&mmcc GPU_AHB_CLK>,
-				<&mmcc GPU_GX_RBBMTIMER_CLK>,
-				<&gcc GCC_BIMC_GFX_CLK>,
-				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
+			memory-region = <&adsp_region>;
 
-			clock-names = "core",
-				"iface",
-				"rbbmtimer",
-				"mem",
-				"mem_iface";
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
 
-			power-domains = <&mmcc GPU_GDSC>;
-			iommus = <&adreno_smmu 0>;
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
-			nvmem-cells = <&gpu_speed_bin>;
-			nvmem-cell-names = "speed_bin";
+				label = "lpass";
+				mboxes = <&apcs_glb 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				apr {
+					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-			qcom,gpu-quirk-two-pass-use-wfi;
-			qcom,gpu-quirk-fault-detect-mask;
+					q6core {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
 
-			operating-points-v2 = <&gpu_opp_table>;
+					q6afe: q6afe {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							hdmi@1 {
+								reg = <1>;
+							};
+						};
+					};
 
-			gpu_opp_table: opp-table {
-				compatible  ="operating-points-v2";
+					q6asm: q6asm {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_q6_smmu 1>;
+						};
+					};
 
-				/*
-				 * 624Mhz and 560Mhz are only available on speed
-				 * bin (1 << 0). All the rest are available on
-				 * all bins of the hardware
-				 */
-				opp-624000000 {
-					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x01>;
-				};
-				opp-560000000 {
-					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x01>;
-				};
-				opp-510000000 {
-					opp-hz = /bits/ 64 <510000000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-401800000 {
-					opp-hz = /bits/ 64 <401800000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-315000000 {
-					opp-hz = /bits/ 64 <315000000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-214000000 {
-					opp-hz = /bits/ 64 <214000000>;
-					opp-supported-hw = <0xFF>;
-				};
-				opp-133000000 {
-					opp-hz = /bits/ 64 <133000000>;
-					opp-supported-hw = <0xFF>;
+					q6adm: q6adm {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
 				};
-			};
 
-			zap-shader {
-				memory-region = <&zap_shader_region>;
 			};
 		};
 
-		mdss: mdss@900000 {
-			compatible = "qcom,mdss";
-
-			reg = <0x900000 0x1000>,
-			      <0x9b0000 0x1040>,
-			      <0x9b8000 0x1040>;
-			reg-names = "mdss_phys",
-				    "vbif_phys",
-				    "vbif_nrt_phys";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
+		apcs_glb: mailbox@9820000 {
+			compatible = "qcom,msm8996-apcs-hmss-global";
+			reg = <0x09820000 0x1000>;
 
-			clocks = <&mmcc MDSS_AHB_CLK>;
-			clock-names = "iface";
+			#mbox-cells = <1>;
+		};
 
+		timer@9840000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x09840000 0x1000>;
+			clock-frequency = <19200000>;
 
-			mdp: mdp@901000 {
-				compatible = "qcom,mdp5";
-				reg = <0x901000 0x90000>;
-				reg-names = "mdp_phys";
+			frame@9850000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09850000 0x1000>,
+				      <0x09860000 0x1000>;
+			};
 
-				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			frame@9870000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09870000 0x1000>;
+				status = "disabled";
+			};
 
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc SMMU_MDP_AXI_CLK>,
-					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-					      "bus",
-					      "core",
-					      "iommu",
-					      "vsync";
+			frame@9880000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09880000 0x1000>;
+				status = "disabled";
+			};
 
-				iommus = <&mdp_smmu 0>;
+			frame@9890000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09890000 0x1000>;
+				status = "disabled";
+			};
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			frame@98a0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098a0000 0x1000>;
+				status = "disabled";
+			};
 
-					port@0 {
-						reg = <0>;
-						mdp5_intf3_out: endpoint {
-							remote-endpoint = <&hdmi_in>;
-						};
-					};
-				};
+			frame@98b0000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098b0000 0x1000>;
+				status = "disabled";
 			};
 
-			hdmi: hdmi-tx@9a0000 {
-				compatible = "qcom,hdmi-tx-8996";
-				reg =	<0x009a0000 0x50c>,
-					<0x00070000 0x6158>,
-					<0x009e0000 0xfff>;
-				reg-names = "core_physical",
-					    "qfprom_physical",
-					    "hdcp_physical";
+			frame@98c0000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098c0000 0x1000>;
+				status = "disabled";
+			};
+		};
 
-				interrupt-parent = <&mdss>;
-				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		saw3: syscon@9a10000 {
+			compatible = "syscon";
+			reg = <0x09a10000 0x1000>;
+		};
 
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_HDMI_CLK>,
-					 <&mmcc MDSS_HDMI_AHB_CLK>,
-					 <&mmcc MDSS_EXTPCLK_CLK>;
-				clock-names =
-					"mdp_core",
-					"iface",
-					"core",
-					"alt_iface",
-					"extp";
+		intc: interrupt-controller@9bc0000 {
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x09bc0000 0x10000>,
+			      <0x09c00000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
 
-				phys = <&hdmi_phy>;
-				phy-names = "hdmi_phy";
-				#sound-dai-cells = <1>;
+	sound: sound {
+	};
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-					port@0 {
-						reg = <0>;
-						hdmi_in: endpoint {
-							remote-endpoint = <&mdp5_intf3_out>;
-						};
-					};
-				};
-			};
+			thermal-sensors = <&tsens0 3>;
 
-			hdmi_phy: hdmi-phy@9a0600 {
-				#phy-cells = <0>;
-				compatible = "qcom,hdmi-phy-8996";
-				reg = <0x9a0600 0x1c4>,
-				      <0x9a0a00 0x124>,
-				      <0x9a0c00 0x124>,
-				      <0x9a0e00 0x124>,
-				      <0x9a1000 0x124>,
-				      <0x9a1200 0x0c8>;
-				reg-names = "hdmi_pll",
-					    "hdmi_tx_l0",
-					    "hdmi_tx_l1",
-					    "hdmi_tx_l2",
-					    "hdmi_tx_l3",
-					    "hdmi_phy";
+			trips {
+				cpu0_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&gcc GCC_HDMI_CLKREF_CLK>;
-				clock-names = "iface",
-					      "ref";
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
 
-		venus_smmu: arm,smmu-venus@d40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0xd40000 0x20000>;
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
-			clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
-				 <&mmcc SMMU_VIDEO_AXI_CLK>;
-			clock-names = "iface", "bus";
-			#iommu-cells = <1>;
-			status = "okay";
-		};
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		video-codec@c00000 {
-			compatible = "qcom,msm8996-venus";
-			reg = <0x00c00000 0xff000>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc VENUS_GDSC>;
-			clocks = <&mmcc VIDEO_CORE_CLK>,
-				 <&mmcc VIDEO_AHB_CLK>,
-				 <&mmcc VIDEO_AXI_CLK>,
-				 <&mmcc VIDEO_MAXI_CLK>;
-			clock-names = "core", "iface", "bus", "mbus";
-			iommus = <&venus_smmu 0x00>,
-				 <&venus_smmu 0x01>,
-				 <&venus_smmu 0x0a>,
-				 <&venus_smmu 0x07>,
-				 <&venus_smmu 0x0e>,
-				 <&venus_smmu 0x0f>,
-				 <&venus_smmu 0x08>,
-				 <&venus_smmu 0x09>,
-				 <&venus_smmu 0x0b>,
-				 <&venus_smmu 0x0c>,
-				 <&venus_smmu 0x0d>,
-				 <&venus_smmu 0x10>,
-				 <&venus_smmu 0x11>,
-				 <&venus_smmu 0x21>,
-				 <&venus_smmu 0x28>,
-				 <&venus_smmu 0x29>,
-				 <&venus_smmu 0x2b>,
-				 <&venus_smmu 0x2c>,
-				 <&venus_smmu 0x2d>,
-				 <&venus_smmu 0x31>;
-			memory-region = <&venus_region>;
-			status = "okay";
+			thermal-sensors = <&tsens0 5>;
 
-			video-decoder {
-				compatible = "venus-decoder";
-				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-				clock-names = "core";
-				power-domains = <&mmcc VENUS_CORE0_GDSC>;
-			};
+			trips {
+				cpu1_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-			video-encoder {
-				compatible = "venus-encoder";
-				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-				clock-names = "core";
-				power-domains = <&mmcc VENUS_CORE1_GDSC>;
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
 			};
 		};
-	};
-
-	sound: sound {
-	};
-
-	adsp-pil {
-		compatible = "qcom,msm8996-adsp-pil";
 
-		interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready",
-				  "handover", "stop-ack";
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		clocks = <&xo_board>;
-		clock-names = "xo";
+			thermal-sensors = <&tsens0 8>;
 
-		memory-region = <&adsp_region>;
+			trips {
+				cpu2_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
 
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 
-		smd-edge {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			label = "lpass";
-			mboxes = <&apcs_glb 8>;
-			qcom,smd-edge = <1>;
-			qcom,remote-pid = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			apr {
-				power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
-				compatible = "qcom,apr-v2";
-				qcom,smd-channels = "apr_audio_svc";
-				qcom,apr-domain = <APR_DOMAIN_ADSP>;
-				#address-cells = <1>;
-				#size-cells = <0>;
+			thermal-sensors = <&tsens0 10>;
 
-				q6core {
-					reg = <APR_SVC_ADSP_CORE>;
-					compatible = "qcom,q6core";
-				};
-
-				q6afe: q6afe {
-					compatible = "qcom,q6afe";
-					reg = <APR_SVC_AFE>;
-					q6afedai: dais {
-						compatible = "qcom,q6afe-dais";
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#sound-dai-cells = <1>;
-						hdmi@1 {
-							reg = <1>;
-						};
-					};
+			trips {
+				cpu3_alert0: trip-point@0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
 				};
 
-				q6asm: q6asm {
-					compatible = "qcom,q6asm";
-					reg = <APR_SVC_ASM>;
-					q6asmdai: dais {
-						compatible = "qcom,q6asm-dais";
-						#sound-dai-cells = <1>;
-						iommus = <&lpass_q6_smmu 1>;
-					};
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
 				};
+			};
+		};
 
-				q6adm: q6adm {
-					compatible = "qcom,q6adm";
-					reg = <APR_SVC_ADM>;
-					q6routing: routing {
-						compatible = "qcom,q6adm-routing";
-						#sound-dai-cells = <0>;
-					};
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				gpu1_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
 			};
-
 		};
-	};
 
-	adsp-smp2p {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+			thermal-sensors = <&tsens1 7>;
 
-		mboxes = <&apcs_glb 10>;
+			trips {
+				gpu2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
+		m4m-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				m4m_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
+		l3-or-venus-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				l3_or_venus_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
-	};
 
-	modem-smp2p {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
+		cluster0-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+			thermal-sensors = <&tsens0 7>;
 
-		mboxes = <&apcs_glb 14>;
+			trips {
+				cluster0_l2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
+		cluster1-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cluster1_l2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				camera_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
-	};
 
-	smp2p-slpi {
-		compatible = "qcom,smp2p";
-		qcom,smem = <481>, <430>;
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+			thermal-sensors = <&tsens1 2>;
 
-		mboxes = <&apcs_glb 26>;
+			trips {
+				q6_dsp_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
 
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <3>;
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		slpi_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 
-		slpi_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				modemtx_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
 };
 #include "msm8996-pins.dtsi"
diff --git a/dts/src/arm64/qcom/msm8998-clamshell.dtsi b/dts/src/arm64/qcom/msm8998-clamshell.dtsi
index 6138b58db6..6ab830d018 100644
--- a/dts/src/arm64/qcom/msm8998-clamshell.dtsi
+++ b/dts/src/arm64/qcom/msm8998-clamshell.dtsi
@@ -74,6 +74,23 @@
 	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
 };
 
+&pm8005_lsid1 {
+	pm8005-regulators {
+		compatible = "qcom,pm8005-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+
+		pm8005_s1: s1 { /* VDD_GFX supply */
+			regulator-min-microvolt = <524000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-enable-ramp-delay = <500>;
+
+			/* hack until we rig up the gpu consumer */
+			regulator-always-on;
+		};
+	};
+};
+
 &qusb2phy {
 	status = "okay";
 
@@ -292,3 +309,35 @@
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&blsp1_uart3_on {
+	rx {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi
index 5f101a20a2..0e0b9bc129 100644
--- a/dts/src/arm64/qcom/msm8998-mtp.dtsi
+++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi
@@ -9,6 +9,7 @@
 / {
 	aliases {
 		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
 	};
 
 	chosen {
@@ -311,6 +312,14 @@
 	};
 };
 
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 };
@@ -364,3 +373,35 @@
 	vdda-phy-supply = <&vreg_l1a_0p875>;
 	vdda-pll-supply = <&vreg_l2a_1p2>;
 };
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&blsp1_uart3_on {
+	rx {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
diff --git a/dts/src/arm64/qcom/msm8998-pins.dtsi b/dts/src/arm64/qcom/msm8998-pins.dtsi
index e32d3ab395..7c222cbf19 100644
--- a/dts/src/arm64/qcom/msm8998-pins.dtsi
+++ b/dts/src/arm64/qcom/msm8998-pins.dtsi
@@ -77,13 +77,30 @@
 	};
 
 	blsp1_uart3_on: blsp1_uart3_on {
-		mux {
-			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		tx {
+			pins = "gpio45";
 			function = "blsp_uart3_a";
+			drive-strength = <2>;
+			bias-disable;
 		};
 
-		config {
-			pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		rx {
+			pins = "gpio46";
+			function = "blsp_uart3_a";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cts {
+			pins = "gpio47";
+			function = "blsp_uart3_a";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rfr {
+			pins = "gpio48";
+			function = "blsp_uart3_a";
 			drive-strength = <2>;
 			bias-disable;
 		};
diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi
index fc7838ea9a..91f7f2d075 100644
--- a/dts/src/arm64/qcom/msm8998.dtsi
+++ b/dts/src/arm64/qcom/msm8998.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -28,8 +29,13 @@
 		#size-cells = <2>;
 		ranges;
 
-		memory@85800000 {
-			reg = <0x0 0x85800000 0x0 0x800000>;
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x100000>;
 			no-map;
 		};
 
@@ -38,21 +44,69 @@
 			no-map;
 		};
 
-		memory@86200000 {
+		tz_mem: memory@86200000 {
 			reg = <0x0 0x86200000 0x0 0x2d00000>;
 			no-map;
 		};
 
-		rmtfs {
+		rmtfs_mem: memory@88f00000 {
 			compatible = "qcom,rmtfs-mem";
-
-			size = <0x0 0x200000>;
-			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+			reg = <0x0 0x88f00000 0x0 0x200000>;
 			no-map;
 
 			qcom,client-id = <1>;
 			qcom,vmid = <15>;
 		};
+
+		spss_mem: memory@8ab00000 {
+			reg = <0x0 0x8ab00000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8cc00000 {
+			reg = <0x0 0x8cc00000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@93c00000 {
+			reg = <0x0 0x93c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94300000 {
+			reg = <0x0 0x94300000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95200000 {
+			reg = <0x0 0x95200000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95210000 {
+			reg = <0x0 0x95210000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95700000 {
+			reg = <0x0 0x95700000 0x0 0x100000>;
+			no-map;
+		};
 	};
 
 	clocks {
@@ -817,8 +871,9 @@
 			reg = <0x010ab000 0x1000>, /* TM */
 			      <0x010aa000 0x1000>; /* SROT */
 			#qcom,sensors = <14>;
-			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -827,8 +882,9 @@
 			reg = <0x010ae000 0x1000>, /* TM */
 			      <0x010ad000 0x1000>; /* SROT */
 			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -847,6 +903,25 @@
 				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pcie0: pci@1c00000 {
 			compatible = "qcom,pcie-msm8996";
 			reg =	<0x01c00000 0x2000>,
@@ -987,7 +1062,7 @@
 
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
-			reg = <0x01f40000 0x20000>;
+			reg = <0x01f40000 0x40000>;
 		};
 
 		tlmm: pinctrl@3400000 {
@@ -1000,6 +1075,110 @@
 			#interrupt-cells = <0x2>;
 		};
 
+		remoteproc_mss: remoteproc@4080000 {
+			compatible = "qcom,msm8998-mss-pil";
+			reg = <0x04080000 0x100>, <0x04180000 0x20>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "qdss", "xo";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+			power-domains = <&rpmpd MSM8998_VDDCX>,
+					<&rpmpd MSM8998_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,msm8998-gpucc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GPLL0_OUT_MAIN>;
+			clock-names = "xo",
+				      "gpll0";
+		};
+
+		remoteproc_slpi: remoteproc@5800000 {
+			compatible = "qcom,msm8998-slpi-pas";
+			reg = <0x05800000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			px-supply = <&vreg_lvs2a_1p8>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "xo", "aggre2";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_SSCCX>;
+			power-domain-names = "ssc_cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+		};
+
 		stm: stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x06002000 0x1000>,
@@ -1792,6 +1971,39 @@
 			#size-cells = <0>;
 		};
 
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,msm8998-adsp-pas";
+			reg = <0x17300000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_VDDCX>;
+			power-domain-names = "cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+		};
+
 		apcs_glb: mailbox@17911000 {
 			compatible = "qcom,msm8998-apcs-hmss-global";
 			reg = <0x17911000 0x1000>;
@@ -1870,6 +2082,32 @@
 			redistributor-stride = <0x0 0x20000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0x18800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+			clock-names = "cxo_ref_clk_pin";
+			interrupts =
+				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&anoc2_smmu 0x1900>,
+				 <&anoc2_smmu 0x1901>;
+			qcom,snoc-host-cap-8bit-quirk;
+		};
 	};
 };
 
diff --git a/dts/src/arm64/qcom/pm6150.dtsi b/dts/src/arm64/qcom/pm6150.dtsi
new file mode 100644
index 0000000000..23534639f4
--- /dev/null
+++ b/dts/src/arm64/qcom/pm6150.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+&spmi_bus {
+	pm6150_lsid0: pmic@0 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm6150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150_gpio: gpios@c000 {
+			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150_gpio 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150_lsid1: pmic@1 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/dts/src/arm64/qcom/pm6150l.dtsi b/dts/src/arm64/qcom/pm6150l.dtsi
new file mode 100644
index 0000000000..f84027b505
--- /dev/null
+++ b/dts/src/arm64/qcom/pm6150l.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2019, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm6150l_lsid4: pmic@4 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_gpio: gpios@c000 {
+			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150l_gpio 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150l_lsid5: pmic@5 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/dts/src/arm64/qcom/pm8004.dtsi b/dts/src/arm64/qcom/pm8004.dtsi
index 297b57bfa8..0abd1abe12 100644
--- a/dts/src/arm64/qcom/pm8004.dtsi
+++ b/dts/src/arm64/qcom/pm8004.dtsi
@@ -4,17 +4,23 @@
 
 &spmi_bus {
 
-	pmic@4 {
+	pm8004_lsid4: pmic@4 {
 		compatible = "qcom,pm8004", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
-	pmic@5 {
+	pm8004_lsid5: pmic@5 {
 		compatible = "qcom,pm8004", "qcom,spmi-pmic";
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+
+		pm8004_spmi_regulators: regulators {
+			compatible = "qcom,pm8004-regulators";
+		};
 	};
 };
diff --git a/dts/src/arm64/qcom/pm8916.dtsi b/dts/src/arm64/qcom/pm8916.dtsi
index 9dd2df1cbf..0bcdf04711 100644
--- a/dts/src/arm64/qcom/pm8916.dtsi
+++ b/dts/src/arm64/qcom/pm8916.dtsi
@@ -111,6 +111,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8916_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
 		wcd_codec: codec@f000 {
 			compatible = "qcom,pm8916-wcd-analog-codec";
 			reg = <0xf000 0x200>;
diff --git a/dts/src/arm64/qcom/pm8994.dtsi b/dts/src/arm64/qcom/pm8994.dtsi
index 76b5a3e6a2..7e4f777746 100644
--- a/dts/src/arm64/qcom/pm8994.dtsi
+++ b/dts/src/arm64/qcom/pm8994.dtsi
@@ -85,5 +85,9 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8994_spmi_regulators: regulators {
+			compatible = "qcom,pm8994-regulators";
+		};
 	};
 };
diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi
index 501a7330db..522d3ef72d 100644
--- a/dts/src/arm64/qcom/qcs404-evb.dtsi
+++ b/dts/src/arm64/qcom/qcs404-evb.dtsi
@@ -73,6 +73,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-name = "vdd_apc";
+		regulator-initial-mode = <1>;
 		regulator-min-microvolt = <1048000>;
 		regulator-max-microvolt = <1384000>;
 	};
diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi
index f5f0c4c9cb..4ee1e3d5f1 100644
--- a/dts/src/arm64/qcom/qcs404.dtsi
+++ b/dts/src/arm64/qcom/qcs404.dtsi
@@ -42,6 +42,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		CPU1: cpu@101 {
@@ -52,6 +56,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		CPU2: cpu@102 {
@@ -62,6 +70,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		CPU3: cpu@103 {
@@ -72,6 +84,10 @@
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
 		};
 
 		L2_0: l2-cache {
@@ -94,6 +110,41 @@
 		};
 	};
 
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
 	firmware {
 		scm: scm {
 			compatible = "qcom,scm-qcs404", "qcom,scm";
@@ -280,6 +331,62 @@
 			tsens_caldata: caldata@d0 {
 				reg = <0x1f8 0x14>;
 			};
+			cpr_efuse_speedbin: speedbin@13c {
+				reg = <0x13c 0x4>;
+				bits = <2 3>;
+			};
+			cpr_efuse_quot_offset1: qoffset1@231 {
+				reg = <0x231 0x4>;
+				bits = <4 7>;
+			};
+			cpr_efuse_quot_offset2: qoffset2@232 {
+				reg = <0x232 0x4>;
+				bits = <3 7>;
+			};
+			cpr_efuse_quot_offset3: qoffset3@233 {
+				reg = <0x233 0x4>;
+				bits = <2 7>;
+			};
+			cpr_efuse_init_voltage1: ivoltage1@229 {
+				reg = <0x229 0x4>;
+				bits = <4 6>;
+			};
+			cpr_efuse_init_voltage2: ivoltage2@22a {
+				reg = <0x22a 0x4>;
+				bits = <2 6>;
+			};
+			cpr_efuse_init_voltage3: ivoltage3@22b {
+				reg = <0x22b 0x4>;
+				bits = <0 6>;
+			};
+			cpr_efuse_quot1: quot1@22b {
+				reg = <0x22b 0x4>;
+				bits = <6 12>;
+			};
+			cpr_efuse_quot2: quot2@22d {
+				reg = <0x22d 0x4>;
+				bits = <2 12>;
+			};
+			cpr_efuse_quot3: quot3@230 {
+				reg = <0x230 0x4>;
+				bits = <0 12>;
+			};
+			cpr_efuse_ring1: ring1@228 {
+				reg = <0x228 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_ring2: ring2@228 {
+				reg = <0x228 0x4>;
+				bits = <4 3>;
+			};
+			cpr_efuse_ring3: ring3@229 {
+				reg = <0x229 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_revision: revision@218 {
+				reg = <0x218 0x4>;
+				bits = <3 3>;
+			};
 		};
 
 		rng: rng@e3000 {
@@ -902,14 +1009,65 @@
 			compatible = "qcom,qcs404-apcs-apps-global", "syscon";
 			reg = <0x0b011000 0x1000>;
 			#mbox-cells = <1>;
+			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		apcs_hfpll: clock-controller@b016000 {
+			compatible = "qcom,hfpll";
+			reg = <0x0b016000 0x30>;
+			#clock-cells = <0>;
+			clock-output-names = "apcs_hfpll";
+			clocks = <&xo_board>;
+			clock-names = "xo";
 		};
 
 		watchdog@b017000 {
-			compatible = "qcom,kpss-wdt";
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
 			reg = <0x0b017000 0x1000>;
 			clocks = <&sleep_clk>;
 		};
 
+		cpr: power-controller@b018000 {
+			compatible = "qcom,qcs404-cpr", "qcom,cpr";
+			reg = <0x0b018000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xo_board>;
+			clock-names = "ref";
+			vdd-apc-supply = <&pms405_s3>;
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&cpr_opp_table>;
+			acc-syscon = <&tcsr>;
+
+			nvmem-cells = <&cpr_efuse_quot_offset1>,
+				<&cpr_efuse_quot_offset2>,
+				<&cpr_efuse_quot_offset3>,
+				<&cpr_efuse_init_voltage1>,
+				<&cpr_efuse_init_voltage2>,
+				<&cpr_efuse_init_voltage3>,
+				<&cpr_efuse_quot1>,
+				<&cpr_efuse_quot2>,
+				<&cpr_efuse_quot3>,
+				<&cpr_efuse_ring1>,
+				<&cpr_efuse_ring2>,
+				<&cpr_efuse_ring3>,
+				<&cpr_efuse_revision>;
+			nvmem-cell-names = "cpr_quotient_offset1",
+				"cpr_quotient_offset2",
+				"cpr_quotient_offset3",
+				"cpr_init_voltage1",
+				"cpr_init_voltage2",
+				"cpr_init_voltage3",
+				"cpr_quotient1",
+				"cpr_quotient2",
+				"cpr_quotient3",
+				"cpr_ring_osc1",
+				"cpr_ring_osc2",
+				"cpr_ring_osc3",
+				"cpr_fuse_revision";
+		};
+
 		timer@b120000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/dts/src/arm64/qcom/sc7180-idp.dts b/dts/src/arm64/qcom/sc7180-idp.dts
new file mode 100644
index 0000000000..388f50ad4f
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180-idp.dts
@@ -0,0 +1,430 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 IDP board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7180.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SC7180 IDP";
+	compatible = "qcom,sc7180-idp", "qcom,sc7180";
+
+	aliases {
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	pm6150-rpmh-regulators {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4a_0p8: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p6: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_2p8: ldo18 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l19a_2p9: ldo19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+
+	pm6150l-rpmh-regulators {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vreg_l4a_0p8>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l4a_0p8>;
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&qspi_clk {
+	pinconf {
+		pins = "gpio63";
+		bias-disable;
+	};
+};
+
+&qspi_cs0 {
+	pinconf {
+		pins = "gpio68";
+		bias-disable;
+	};
+};
+
+&qspi_data01 {
+	pinconf {
+		pins = "gpio64", "gpio65";
+
+		/* High-Z when no transfers; nice to park the lines */
+		bias-pull-up;
+	};
+};
+
+&qup_i2c2_default {
+	pinconf {
+		pins = "gpio15", "gpio16";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c4_default {
+	pinconf {
+		pins = "gpio115", "gpio116";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c7_default {
+	pinconf {
+		pins = "gpio6", "gpio7";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_i2c9_default {
+	pinconf {
+		pins = "gpio46", "gpio47";
+		drive-strength = <2>;
+
+		/* Has external pullup */
+		bias-disable;
+	};
+};
+
+&qup_uart3_default {
+	pinconf-cts {
+		/*
+		 * Configure a pull-down on 38 (CTS) to match the pull of
+		 * the Bluetooth module.
+		 */
+		pins = "gpio38";
+		bias-pull-down;
+		output-high;
+	};
+
+	pinconf-rts {
+		/* We'll drive 39 (RTS), so no pull */
+		pins = "gpio39";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-tx {
+		/* We'll drive 40 (TX), so no pull */
+		pins = "gpio40";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	pinconf-rx {
+		/*
+		 * Configure a pull-up on 41 (RX). This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module is
+		 * in tri-state (module powered off or not driving the
+		 * signal yet).
+		 */
+		pins = "gpio41";
+		bias-pull-up;
+	};
+};
+
+&qup_uart8_default {
+	pinconf-tx {
+		pins = "gpio44";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		pins = "gpio45";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&qup_spi0_default {
+	pinconf {
+		pins = "gpio34", "gpio35", "gpio36", "gpio37";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_spi6_default {
+	pinconf {
+		pins = "gpio59", "gpio60", "gpio61", "gpio62";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_spi10_default {
+	pinconf {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi
new file mode 100644
index 0000000000..8011c5fe2a
--- /dev/null
+++ b/dts/src/arm64/qcom/sc7180.dtsi
@@ -0,0 +1,2187 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 SoC device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sc7180.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi3 = &spi3;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi8 = &spi8;
+		spi10 = &spi10;
+		spi11 = &spi11;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		aop_cmd_db_mem: memory@80820000 {
+			reg = <0x0 0x80820000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sc7180", "qcom,scm";
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc7180";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom@784000 {
+			compatible = "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim-primary@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 3>;
+			};
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart8: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart10: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart11: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0 0x01f40000 0 0x40000>;
+		};
+
+		tlmm: pinctrl@3500000 {
+			compatible = "qcom,sc7180-pinctrl";
+			reg = <0 0x03500000 0 0x300000>,
+			      <0 0x03900000 0 0x300000>,
+			      <0 0x03d00000 0 0x300000>;
+			reg-names = "west", "north", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 120>;
+			wakeup-parent = <&pdc>;
+
+			qspi_clk: qspi-clk {
+				pinmux {
+					pins = "gpio63";
+					function = "qspi_clk";
+				};
+			};
+
+			qspi_cs0: qspi-cs0 {
+				pinmux {
+					pins = "gpio68";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_cs1: qspi-cs1 {
+				pinmux {
+					pins = "gpio72";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_data01: qspi-data01 {
+				pinmux-data {
+					pins = "gpio64", "gpio65";
+					function = "qspi_data";
+				};
+			};
+
+			qspi_data12: qspi-data12 {
+				pinmux-data {
+					pins = "gpio66", "gpio67";
+					function = "qspi_data";
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default {
+				pinmux {
+					pins = "gpio34", "gpio35";
+					function = "qup00";
+				};
+			};
+
+			qup_i2c1_default: qup-i2c1-default {
+				pinmux {
+					pins = "gpio0", "gpio1";
+					function = "qup01";
+				};
+			};
+
+			qup_i2c2_default: qup-i2c2-default {
+				pinmux {
+					pins = "gpio15", "gpio16";
+					function = "qup02_i2c";
+				};
+			};
+
+			qup_i2c3_default: qup-i2c3-default {
+				pinmux {
+					pins = "gpio38", "gpio39";
+					function = "qup03";
+				};
+			};
+
+			qup_i2c4_default: qup-i2c4-default {
+				pinmux {
+					pins = "gpio115", "gpio116";
+					function = "qup04_i2c";
+				};
+			};
+
+			qup_i2c5_default: qup-i2c5-default {
+				pinmux {
+					pins = "gpio25", "gpio26";
+					function = "qup05";
+				};
+			};
+
+			qup_i2c6_default: qup-i2c6-default {
+				pinmux {
+					pins = "gpio59", "gpio60";
+					function = "qup10";
+				};
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				pinmux {
+					pins = "gpio6", "gpio7";
+					function = "qup11_i2c";
+				};
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				pinmux {
+					pins = "gpio42", "gpio43";
+					function = "qup12";
+				};
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				pinmux {
+					pins = "gpio46", "gpio47";
+					function = "qup13_i2c";
+				};
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				pinmux {
+					pins = "gpio86", "gpio87";
+					function = "qup14";
+				};
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				pinmux {
+					pins = "gpio53", "gpio54";
+					function = "qup15";
+				};
+			};
+
+			qup_spi0_default: qup-spi0-default {
+				pinmux {
+					pins = "gpio34", "gpio35",
+					       "gpio36", "gpio37";
+					function = "qup00";
+				};
+			};
+
+			qup_spi1_default: qup-spi1-default {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup01";
+				};
+			};
+
+			qup_spi3_default: qup-spi3-default {
+				pinmux {
+					pins = "gpio38", "gpio39",
+					       "gpio40", "gpio41";
+					function = "qup03";
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				pinmux {
+					pins = "gpio25", "gpio26",
+					       "gpio27", "gpio28";
+					function = "qup05";
+				};
+			};
+
+			qup_spi6_default: qup-spi6-default {
+				pinmux {
+					pins = "gpio59", "gpio60",
+					       "gpio61", "gpio62";
+					function = "qup10";
+				};
+			};
+
+			qup_spi8_default: qup-spi8-default {
+				pinmux {
+					pins = "gpio42", "gpio43",
+					       "gpio44", "gpio45";
+					function = "qup12";
+				};
+			};
+
+			qup_spi10_default: qup-spi10-default {
+				pinmux {
+					pins = "gpio86", "gpio87",
+					       "gpio88", "gpio89";
+					function = "qup14";
+				};
+			};
+
+			qup_spi11_default: qup-spi11-default {
+				pinmux {
+					pins = "gpio53", "gpio54",
+					       "gpio55", "gpio56";
+					function = "qup15";
+				};
+			};
+
+			qup_uart0_default: qup-uart0-default {
+				pinmux {
+					pins = "gpio34", "gpio35",
+					       "gpio36", "gpio37";
+					function = "qup00";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-default {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup01";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-default {
+				pinmux {
+					pins = "gpio15", "gpio16";
+					function = "qup02_uart";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-default {
+				pinmux {
+					pins = "gpio38", "gpio39",
+					       "gpio40", "gpio41";
+					function = "qup03";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-default {
+				pinmux {
+					pins = "gpio115", "gpio116";
+					function = "qup04_uart";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-default {
+				pinmux {
+					pins = "gpio25", "gpio26",
+					       "gpio27", "gpio28";
+					function = "qup05";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default {
+				pinmux {
+					pins = "gpio59", "gpio60",
+					       "gpio61", "gpio62";
+					function = "qup10";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-default {
+				pinmux {
+					pins = "gpio6", "gpio7";
+					function = "qup11_uart";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-default {
+				pinmux {
+					pins = "gpio44", "gpio45";
+					function = "qup12";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default {
+				pinmux {
+					pins = "gpio46", "gpio47";
+					function = "qup13_uart";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-default {
+				pinmux {
+					pins = "gpio86", "gpio87",
+					       "gpio88", "gpio89";
+					function = "qup14";
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default {
+				pinmux {
+					pins = "gpio53", "gpio54",
+					       "gpio55", "gpio56";
+					function = "qup15";
+				};
+			};
+		};
+
+		qspi: spi@88dc000 {
+			compatible = "qcom,qspi-v1";
+			reg = <0 0x088dc000 0 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7180-qusb2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7180-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x38>;
+			reg-names = "reg-base", "dp_com";
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: phy@88e9200 {
+				reg = <0 0x088e9200 0 0x128>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x128>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x18>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7180-llcc";
+			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: dwc3@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x540 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7180-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 15>, <17 497 98>,
+					  <119 634 4>, <124 639 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b2e0000 {
+			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
+			reg = <0 0x0b2e0000 0 0x20000>;
+			#reset-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: qmp@c300000 {
+			compatible = "qcom,sc7180-aoss-qmp";
+			reg = <0 0x0c300000 0 0x100000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0x17a40000 0 0x20000>;
+				status = "disabled";
+			};
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sc7180-apss-shared";
+			reg = <0 0x17c00000 0 0x10000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17c20000{
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c20000 0 0x1000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c21000 0 0x1000>,
+				      <0 0x17c22000 0 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c23000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c25000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c27000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c29000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c2b000 0 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0 0x17c2d000 0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x18200000 0 0x10000>,
+			      <0 0x18210000 0 0x10000>,
+			      <0 0x18220000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc7180-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7180-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu8-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu8_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu8_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu8_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu9-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu9_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu9_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu9_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss1_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi
index 9a4ff57fc8..7b53b3c7ff 100644
--- a/dts/src/arm64/qcom/sdm845-cheza.dtsi
+++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi
@@ -165,7 +165,6 @@
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
 /delete-node/ &cdsp_pas;
-/delete-node/ &zap_shader;
 /delete-node/ &gpu_mem;
 
 /* Increase the size from 120 MB to 128 MB */
@@ -651,6 +650,20 @@ ap_ts_i2c: &i2c14 {
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
 &spi10 {
 	status = "okay";
 
diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts
index d100f46791..eb77aaa6a8 100644
--- a/dts/src/arm64/qcom/sdm845-db845c.dts
+++ b/dts/src/arm64/qcom/sdm845-db845c.dts
@@ -197,7 +197,7 @@
 &adsp_pas {
 	status = "okay";
 
-	firmware-name = "qcom/db845c/adsp.mdt";
+	firmware-name = "qcom/sdm845/adsp.mdt";
 };
 
 &apps_rsc {
@@ -343,7 +343,7 @@
 
 &cdsp_pas {
 	status = "okay";
-	firmware-name = "qcom/db845c/cdsp.mdt";
+	firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
 &gcc {
@@ -352,6 +352,18 @@
 			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
 &pm8998_gpio {
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";
@@ -529,6 +541,8 @@
 	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
 };
 
 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/dts/src/arm64/qcom/sdm845-mtp.dts b/dts/src/arm64/qcom/sdm845-mtp.dts
index c57548b7b2..09ad37b0dd 100644
--- a/dts/src/arm64/qcom/sdm845-mtp.dts
+++ b/dts/src/arm64/qcom/sdm845-mtp.dts
@@ -360,6 +360,13 @@
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
 &i2c10 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi
index ddb1f23c93..d42302b888 100644
--- a/dts/src/arm64/qcom/sdm845.dtsi
+++ b/dts/src/arm64/qcom/sdm845.dtsi
@@ -1357,7 +1357,7 @@
 			};
 		};
 
-		cache-controller@1100000 {
+		system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
 			reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
 			reg-names = "llcc_base", "llcc_broadcast_base";
@@ -1374,6 +1374,8 @@
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
 			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
 
 			iommus = <&apps_smmu 0x100 0xf>;
 
@@ -1447,6 +1449,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 150>;
+			wakeup-parent = <&pdc_intc>;
 
 			qspi_clk: qspi-clk {
 				pinmux {
@@ -2804,7 +2807,7 @@
 			};
 		};
 
-		gpu@5000000 {
+		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-630.2", "qcom,adreno";
 			#stream-id-cells = <16>;
 
@@ -2824,10 +2827,6 @@
 
 			qcom,gmu = <&gmu>;
 
-			zap_shader: zap-shader {
-				memory-region = <&gpu_mem>;
-			};
-
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2939,6 +2938,15 @@
 			#power-domain-cells = <1>;
 		};
 
+		pdc_intc: interrupt-controller@b220000 {
+			compatible = "qcom,sdm845-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
 		pdc_reset: reset-controller@b2e0000 {
 			compatible = "qcom,sdm845-pdc-global";
 			reg = <0 0x0b2e0000 0 0x20000>;
@@ -2950,8 +2958,9 @@
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <13>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -2960,8 +2969,9 @@
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x1ff>; /* SROT */
 			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -3191,7 +3201,7 @@
 			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-			gic-its@17a40000 {
+			msi-controller@17a40000 {
 				compatible = "arm,gic-v3-its";
 				msi-controller;
 				#msi-cells = <1>;
diff --git a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
index 13dc619687..b255be3a4a 100644
--- a/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/dts/src/arm64/qcom/sdm850-lenovo-yoga-c630.dts
@@ -245,6 +245,13 @@
 			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/dts/src/arm64/qcom/sm8150-mtp.dts b/dts/src/arm64/qcom/sm8150-mtp.dts
index aa5de42fca..8ab16611eb 100644
--- a/dts/src/arm64/qcom/sm8150-mtp.dts
+++ b/dts/src/arm64/qcom/sm8150-mtp.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "sm8150.dtsi"
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
@@ -366,6 +367,18 @@
 	};
 };
 
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <126 4>;
 };
@@ -373,3 +386,25 @@
 &uart2 {
 	status = "okay";
 };
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-max-microamp = <90200>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+	vdda-pll-max-microamp = <19000>;
+};
diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi
index 8f23fcadec..141c21dfa6 100644
--- a/dts/src/arm64/qcom/sm8150.dtsi
+++ b/dts/src/arm64/qcom/sm8150.dtsi
@@ -5,8 +5,11 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -42,6 +45,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -57,6 +61,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -70,6 +75,7 @@
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -82,6 +88,7 @@
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -94,6 +101,7 @@
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -106,6 +114,7 @@
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -118,6 +127,7 @@
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -130,6 +140,7 @@
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -283,6 +294,102 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -306,8 +413,8 @@
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc 123>,
-				 <&gcc 124>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -317,17 +424,120 @@
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
 				clock-names = "se";
-				clocks = <&gcc 105>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
 
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8150-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: lanes@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
 		};
 
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8150-slpi-pas";
+			reg = <0x0 0x02400000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+					<&rpmhpd 3>,
+					<&rpmhpd 2>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+			};
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
@@ -343,6 +553,74 @@
 			#interrupt-cells = <2>;
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8150-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+					<&rpmhpd 7>,
+					<&rpmhpd 0>;
+			power-domain-names = "load_state", "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8150-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+					<&rpmhpd 7>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apss_shared 4>;
+			};
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -372,6 +650,40 @@
 			cell-index = <0>;
 		};
 
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8150-adsp-pas";
+			reg = <0x0 0x17300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+					<&rpmhpd 7>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+			};
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
@@ -387,6 +699,12 @@
 			#mbox-cells = <1>;
 		};
 
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
 		timer@17c20000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -469,6 +787,73 @@
 				clock-names = "xo";
 				clocks = <&xo_board>;
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8150-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
+			      <0 0x18327800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
 		};
 	};
 
diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi
index 2c942a7eae..bd056904e8 100644
--- a/dts/src/arm64/renesas/hihope-common.dtsi
+++ b/dts/src/arm64/renesas/hihope-common.dtsi
@@ -109,8 +109,7 @@
 
 		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	wlan_en_reg: regulator-wlan_en {
diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi
index 34a9f472fb..8f950dabca 100644
--- a/dts/src/arm64/renesas/r8a774a1.dtsi
+++ b/dts/src/arm64/renesas/r8a774a1.dtsi
@@ -521,12 +521,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -837,8 +837,8 @@
 			compatible = "renesas,r8a774a1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -851,8 +851,8 @@
 			compatible = "renesas,r8a774a1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -878,23 +878,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -920,23 +920,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -962,23 +962,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2075,23 +2075,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2117,23 +2117,23 @@
 			compatible = "renesas,dmac-r8a774a1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2323,10 +2323,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2350,10 +2350,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi
index fe78387e4b..c40ea30096 100644
--- a/dts/src/arm64/renesas/r8a774b1.dtsi
+++ b/dts/src/arm64/renesas/r8a774b1.dtsi
@@ -395,12 +395,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -711,8 +711,8 @@
 			compatible = "renesas,r8a774b1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -725,8 +725,8 @@
 			compatible = "renesas,r8a774b1-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
@@ -752,23 +752,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -794,23 +794,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -836,23 +836,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1949,23 +1949,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1983,23 +1983,23 @@
 			compatible = "renesas,dmac-r8a774b1",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2192,10 +2192,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2219,10 +2219,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				  0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				  0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				  0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a774c0-cat874.dts b/dts/src/arm64/renesas/r8a774c0-cat874.dts
index c99b1dec52..26aee004a4 100644
--- a/dts/src/arm64/renesas/r8a774c0-cat874.dts
+++ b/dts/src/arm64/renesas/r8a774c0-cat874.dts
@@ -110,8 +110,7 @@
 
 		gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	wlan_en_reg: fixedregulator {
diff --git a/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts b/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts
new file mode 100644
index 0000000000..a7b27d09f6
--- /dev/null
+++ b/dts/src/arm64/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
+ * connected to an Advantech IDK-2121WR 21.5" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-ek874.dts"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel-lvds {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+		};
+	};
+};
+
+&gpio0 {
+	/*
+	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
+	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
+	 */
+	lvds-connector-en-gpio{
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in0>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in1>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi
index c7bdc36063..a53cd5fcc4 100644
--- a/dts/src/arm64/renesas/r8a774c0.dtsi
+++ b/dts/src/arm64/renesas/r8a774c0.dtsi
@@ -369,12 +369,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -697,8 +697,8 @@
 			compatible = "renesas,r8a774c0-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -711,8 +711,8 @@
 			compatible = "renesas,r8a774c0-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -725,23 +725,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -767,23 +767,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -809,23 +809,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1521,23 +1521,23 @@
 			compatible = "renesas,dmac-r8a774c0",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1679,10 +1679,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a7795-es1-salvator-x.dts b/dts/src/arm64/renesas/r8a77950-salvator-x.dts
index c72968623e..2438825c9b 100644
--- a/dts/src/arm64/renesas/r8a7795-es1-salvator-x.dts
+++ b/dts/src/arm64/renesas/r8a77950-salvator-x.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a77950.dtsi"
 #include "salvator-x.dtsi"
 
 / {
-	model = "Renesas Salvator-X board based on r8a7795 ES1.x";
+	model = "Renesas Salvator-X board based on r8a77950";
 	compatible = "renesas,salvator-x", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7795-h3ulcb-kf.dts b/dts/src/arm64/renesas/r8a77950-ulcb-kf.dts
index 80791ed275..dcaaf12cec 100644
--- a/dts/src/arm64/renesas/r8a7795-h3ulcb-kf.dts
+++ b/dts/src/arm64/renesas/r8a77950-ulcb-kf.dts
@@ -6,11 +6,11 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
-#include "r8a7795-h3ulcb.dts"
+#include "r8a77950-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
-	model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+";
+	model = "Renesas H3ULCB Kingfisher board based on r8a77950";
 	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
 		     "renesas,r8a7795";
 };
diff --git a/dts/src/arm64/renesas/r8a7795-es1-h3ulcb.dts b/dts/src/arm64/renesas/r8a77950-ulcb.dts
index 598b981685..38a6d6a108 100644
--- a/dts/src/arm64/renesas/r8a7795-es1-h3ulcb.dts
+++ b/dts/src/arm64/renesas/r8a77950-ulcb.dts
@@ -7,11 +7,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795-es1.dtsi"
+#include "r8a77950.dtsi"
 #include "ulcb.dtsi"
 
 / {
-	model = "Renesas H3ULCB board based on r8a7795 ES1.x";
+	model = "Renesas H3ULCB board based on r8a77950";
 	compatible = "renesas,h3ulcb", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7795-es1.dtsi b/dts/src/arm64/renesas/r8a77950.dtsi
index 14d8513d2a..15216495e1 100644
--- a/dts/src/arm64/renesas/r8a7795-es1.dtsi
+++ b/dts/src/arm64/renesas/r8a77950.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
  */
 
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 
 &audma0 {
 	iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
diff --git a/dts/src/arm64/renesas/r8a7795-salvator-x.dts b/dts/src/arm64/renesas/r8a77951-salvator-x.dts
index 72874f6753..a402a2fb6e 100644
--- a/dts/src/arm64/renesas/r8a7795-salvator-x.dts
+++ b/dts/src/arm64/renesas/r8a77951-salvator-x.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 #include "salvator-x.dtsi"
 
 / {
-	model = "Renesas Salvator-X board based on r8a7795 ES2.0+";
+	model = "Renesas Salvator-X board based on r8a77951";
 	compatible = "renesas,salvator-x", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7795-salvator-xs.dts b/dts/src/arm64/renesas/r8a77951-salvator-xs.dts
index 36667c81d4..cef9da4376 100644
--- a/dts/src/arm64/renesas/r8a7795-salvator-xs.dts
+++ b/dts/src/arm64/renesas/r8a77951-salvator-xs.dts
@@ -1,16 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
  */
 
 /dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 #include "salvator-xs.dtsi"
 
 / {
-	model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+";
+	model = "Renesas Salvator-X 2nd version board based on r8a77951";
 	compatible = "renesas,salvator-xs", "renesas,r8a7795";
 
 	memory@48000000 {
@@ -136,7 +136,7 @@
 	 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
 	 *   (when SW31 is the default setting on Salvator-XS).
 	 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
-	 *   r8a7795 with Salvator-XS.
+	 *   r8a77951 with Salvator-XS.
 	 *   Hence the SW31 setting must be changed like 2) below.
 	 *   1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
 	 *	- Connect GP6_3[01] to ADV7842.
diff --git a/dts/src/arm64/renesas/r8a7795-es1-h3ulcb-kf.dts b/dts/src/arm64/renesas/r8a77951-ulcb-kf.dts
index 2f24dfc456..11f943a677 100644
--- a/dts/src/arm64/renesas/r8a7795-es1-h3ulcb-kf.dts
+++ b/dts/src/arm64/renesas/r8a77951-ulcb-kf.dts
@@ -6,11 +6,11 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
-#include "r8a7795-es1-h3ulcb.dts"
+#include "r8a77951-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
-	model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES1.x";
+	model = "Renesas H3ULCB Kingfisher board based on r8a77951";
 	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
 		     "renesas,r8a7795";
 };
diff --git a/dts/src/arm64/renesas/r8a7795-h3ulcb.dts b/dts/src/arm64/renesas/r8a77951-ulcb.dts
index 54515eaf03..8ad8f2a539 100644
--- a/dts/src/arm64/renesas/r8a7795-h3ulcb.dts
+++ b/dts/src/arm64/renesas/r8a77951-ulcb.dts
@@ -7,11 +7,11 @@
  */
 
 /dts-v1/;
-#include "r8a7795.dtsi"
+#include "r8a77951.dtsi"
 #include "ulcb.dtsi"
 
 / {
-	model = "Renesas H3ULCB board based on r8a7795 ES2.0+";
+	model = "Renesas H3ULCB board based on r8a77951";
 	compatible = "renesas,h3ulcb", "renesas,r8a7795";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7795.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi
index fde6ec122d..a8729eb744 100644
--- a/dts/src/arm64/renesas/r8a7795.dtsi
+++ b/dts/src/arm64/renesas/r8a77951.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the R-Car H3 (R8A77950) SoC
+ * Device Tree Source for the R-Car H3 (R8A77951) SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
  */
@@ -605,12 +605,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -873,8 +873,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -887,8 +887,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -901,8 +901,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe6460000 0 0x100>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 326>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -915,8 +915,8 @@
 			compatible = "renesas,r8a7795-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe6470000 0 0x100>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 329>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -951,23 +951,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -993,23 +993,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1035,23 +1035,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2343,23 +2343,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2385,23 +2385,23 @@
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2679,10 +2679,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2706,10 +2706,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a7796-salvator-x.dts b/dts/src/arm64/renesas/r8a77960-salvator-x.dts
index de37e91e3b..ecfbeafeaf 100644
--- a/dts/src/arm64/renesas/r8a7796-salvator-x.dts
+++ b/dts/src/arm64/renesas/r8a77960-salvator-x.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
 #include "salvator-x.dtsi"
 
 / {
-	model = "Renesas Salvator-X board based on r8a7796";
+	model = "Renesas Salvator-X board based on r8a77960";
 	compatible = "renesas,salvator-x", "renesas,r8a7796";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7796-salvator-xs.dts b/dts/src/arm64/renesas/r8a77960-salvator-xs.dts
index a1cbfef205..249896a38f 100644
--- a/dts/src/arm64/renesas/r8a7796-salvator-xs.dts
+++ b/dts/src/arm64/renesas/r8a77960-salvator-xs.dts
@@ -6,11 +6,11 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
 #include "salvator-xs.dtsi"
 
 / {
-	model = "Renesas Salvator-X 2nd version board based on r8a7796";
+	model = "Renesas Salvator-X 2nd version board based on r8a77960";
 	compatible = "renesas,salvator-xs", "renesas,r8a7796";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7796-m3ulcb-kf.dts b/dts/src/arm64/renesas/r8a77960-ulcb-kf.dts
index 2df50eb11f..2151c37d77 100644
--- a/dts/src/arm64/renesas/r8a7796-m3ulcb-kf.dts
+++ b/dts/src/arm64/renesas/r8a77960-ulcb-kf.dts
@@ -6,11 +6,11 @@
  * Copyright (C) 2017 Cogent Embedded, Inc.
  */
 
-#include "r8a7796-m3ulcb.dts"
+#include "r8a77960-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
-	model = "Renesas M3ULCB Kingfisher board based on r8a7796";
+	model = "Renesas M3ULCB Kingfisher board based on r8a77960";
 	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
 		     "renesas,r8a7796";
 };
diff --git a/dts/src/arm64/renesas/r8a7796-m3ulcb.dts b/dts/src/arm64/renesas/r8a77960-ulcb.dts
index 9e4594c27f..d041042a56 100644
--- a/dts/src/arm64/renesas/r8a7796-m3ulcb.dts
+++ b/dts/src/arm64/renesas/r8a77960-ulcb.dts
@@ -7,11 +7,11 @@
  */
 
 /dts-v1/;
-#include "r8a7796.dtsi"
+#include "r8a77960.dtsi"
 #include "ulcb.dtsi"
 
 / {
-	model = "Renesas M3ULCB board based on r8a7796";
+	model = "Renesas M3ULCB board based on r8a77960";
 	compatible = "renesas,m3ulcb", "renesas,r8a7796";
 
 	memory@48000000 {
diff --git a/dts/src/arm64/renesas/r8a7796.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi
index b9db882b03..60f156cfd2 100644
--- a/dts/src/arm64/renesas/r8a7796.dtsi
+++ b/dts/src/arm64/renesas/r8a77960.dtsi
@@ -574,12 +574,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -825,8 +825,8 @@
 			compatible = "renesas,r8a7796-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -839,8 +839,8 @@
 			compatible = "renesas,r8a7796-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -866,23 +866,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -908,23 +908,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -950,23 +950,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2210,23 +2210,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2252,23 +2252,23 @@
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2462,10 +2462,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2489,10 +2489,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi
index 64466c86b6..be3824bda6 100644
--- a/dts/src/arm64/renesas/r8a77961.dtsi
+++ b/dts/src/arm64/renesas/r8a77961.dtsi
@@ -319,53 +319,133 @@
 		ranges;
 
 		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77961-wdt",
+				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
 		};
 
 		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
 		};
 
 		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
 		};
 
 		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
 		};
 
 		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
 		};
 
 		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
 			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
 		};
 
 		pfc: pin-controller@e6060000 {
@@ -401,27 +481,138 @@
 			/* placeholder */
 		};
 
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
 		i2c2: i2c@e6510000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe6510000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
 		};
 
 		i2c4: i2c@e66d8000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
 			reg = <0 0xe66d8000 0 0x40>;
-			/* placeholder */
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
 		};
 
 		i2c_dvfs: i2c@e60b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77961",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
-			/* placeholder */
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
+
 		hscif1: serial@e6550000 {
 			reg = <0 0xe6550000 0 0x60>;
 			/* placeholder */
@@ -438,11 +629,151 @@
 			/* placeholder */
 		};
 
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77961",
+				     "renesas,etheravb-rcar-gen3";
 			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			/* placeholder */
+			status = "disabled";
 		};
 
 		pwm1: pwm@e6e31000 {
@@ -574,18 +905,51 @@
 		};
 
 		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
 		};
 
 		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
 		};
 
 		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
-			/* placeholder */
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
 		};
 
 		gic: interrupt-controller@f1010000 {
diff --git a/dts/src/arm64/renesas/r8a77965-m3nulcb-kf.dts b/dts/src/arm64/renesas/r8a77965-ulcb-kf.dts
index dadad97051..12aa08fd6f 100644
--- a/dts/src/arm64/renesas/r8a77965-m3nulcb-kf.dts
+++ b/dts/src/arm64/renesas/r8a77965-ulcb-kf.dts
@@ -6,7 +6,7 @@
  * Copyright (C) 2018 Cogent Embedded, Inc.
  */
 
-#include "r8a77965-m3nulcb.dts"
+#include "r8a77965-ulcb.dts"
 #include "ulcb-kf.dtsi"
 
 / {
diff --git a/dts/src/arm64/renesas/r8a77965-m3nulcb.dts b/dts/src/arm64/renesas/r8a77965-ulcb.dts
index 964078b6cc..964078b6cc 100644
--- a/dts/src/arm64/renesas/r8a77965-m3nulcb.dts
+++ b/dts/src/arm64/renesas/r8a77965-ulcb.dts
diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi
index bdbe197774..c17d90bd16 100644
--- a/dts/src/arm64/renesas/r8a77965.dtsi
+++ b/dts/src/arm64/renesas/r8a77965.dtsi
@@ -429,12 +429,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -680,8 +680,8 @@
 			compatible = "renesas,r8a77965-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -694,8 +694,8 @@
 			compatible = "renesas,r8a77965-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -721,23 +721,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -763,23 +763,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -805,23 +805,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1937,23 +1937,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1971,23 +1971,23 @@
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
-			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -2184,10 +2184,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
@@ -2211,10 +2211,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
-				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
-				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
-				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi
index 0d0558e535..664a73a2cc 100644
--- a/dts/src/arm64/renesas/r8a77970.dtsi
+++ b/dts/src/arm64/renesas/r8a77970.dtsi
@@ -302,8 +302,8 @@
 
 		thermal: thermal@e6190000 {
 			compatible = "renesas,thermal-r8a77970";
-			reg =  <0 0xe6190000 0 0x10
-				0 0xe6190100 0 0x120>;
+			reg = <0 0xe6190000 0 0x10>,
+			      <0 0xe6190100 0 0x120>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
@@ -318,12 +318,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -933,15 +933,15 @@
 			compatible = "renesas,dmac-r8a77970",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7";
@@ -961,15 +961,15 @@
 			compatible = "renesas,dmac-r8a77970",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7";
diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi
index 4d86669af8..b340fb4699 100644
--- a/dts/src/arm64/renesas/r8a77980.dtsi
+++ b/dts/src/arm64/renesas/r8a77980.dtsi
@@ -348,12 +348,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -1174,23 +1174,23 @@
 			compatible = "renesas,dmac-r8a77980",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1216,23 +1216,23 @@
 			compatible = "renesas,dmac-r8a77980",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					  "ch0", "ch1", "ch2", "ch3",
 					  "ch4", "ch5", "ch6", "ch7",
@@ -1367,21 +1367,17 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <
-				0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000
-				0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000
-				0x02000000 0 0x30000000 0 0x30000000 0 0x8000000
-				0x42000000 0 0x38000000 0 0x38000000 0 0x8000000
-			>;
-			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000
-				      0 0x80000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>;
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 148
-					 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
 			clock-names = "pcie", "pcie_bus";
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts
index b38f9d442f..4fd2b14fbb 100644
--- a/dts/src/arm64/renesas/r8a77990-ebisu.dts
+++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts
@@ -182,8 +182,7 @@
 
 		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi1: regulator-vcc-sdhi1 {
@@ -206,8 +205,7 @@
 
 		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga {
@@ -636,7 +634,6 @@
 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
 	clock-frequency = <12288000 11289600>;
-	clkout-lr-synchronous;
 
 	status = "okay";
 
diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi
index 67a6824a96..32d91f2102 100644
--- a/dts/src/arm64/renesas/r8a77990.dtsi
+++ b/dts/src/arm64/renesas/r8a77990.dtsi
@@ -394,12 +394,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -643,8 +643,8 @@
 			compatible = "renesas,r8a77990-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -657,8 +657,8 @@
 			compatible = "renesas,r8a77990-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -671,23 +671,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -713,23 +713,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -755,23 +755,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1474,23 +1474,23 @@
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
-			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -1635,10 +1635,10 @@
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			device_type = "pci";
-			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-				  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-				  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-				  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
 			/* Map all possible DDR as inbound ranges */
 			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi
index e6ee2b709b..9503007c34 100644
--- a/dts/src/arm64/renesas/r8a77995.dtsi
+++ b/dts/src/arm64/renesas/r8a77995.dtsi
@@ -231,12 +231,12 @@
 			#interrupt-cells = <2>;
 			interrupt-controller;
 			reg = <0 0xe61c0000 0 0x200>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			resets = <&cpg 407>;
@@ -365,8 +365,8 @@
 			compatible = "renesas,r8a77995-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65a0000 0 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 330>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -379,8 +379,8 @@
 			compatible = "renesas,r8a77995-usb-dmac",
 				     "renesas,usb-dmac";
 			reg = <0 0xe65b0000 0 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ch0", "ch1";
 			clocks = <&cpg CPG_MOD 331>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -418,15 +418,15 @@
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe6700000 0 0x10000>;
-			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7";
@@ -446,15 +446,15 @@
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7300000 0 0x10000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7";
@@ -474,15 +474,15 @@
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
 			reg = <0 0xe7310000 0 0x10000>;
-			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7";
diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi
index 21e01056e7..98bbcafc8c 100644
--- a/dts/src/arm64/renesas/salvator-common.dtsi
+++ b/dts/src/arm64/renesas/salvator-common.dtsi
@@ -232,8 +232,7 @@
 
 		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vcc_sdhi3: regulator-vcc-sdhi3 {
@@ -256,8 +255,7 @@
 
 		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	vga {
diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi
index 3ef8917153..ff88af8e39 100644
--- a/dts/src/arm64/renesas/ulcb.dtsi
+++ b/dts/src/arm64/renesas/ulcb.dtsi
@@ -120,8 +120,7 @@
 
 		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
+		states = <3300000 1>, <1800000 0>;
 	};
 
 	x12_clk: x12 {
diff --git a/dts/src/arm64/rockchip/px30-evb.dts b/dts/src/arm64/rockchip/px30-evb.dts
index 936ed7d71f..0a680257d9 100644
--- a/dts/src/arm64/rockchip/px30-evb.dts
+++ b/dts/src/arm64/rockchip/px30-evb.dts
@@ -112,6 +112,38 @@
 	status = "okay";
 };
 
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "xinpeng,xpp055c272";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
@@ -132,6 +164,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -485,6 +522,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
 &u2phy {
 	status = "okay";
 
diff --git a/dts/src/arm64/rockchip/px30.dtsi b/dts/src/arm64/rockchip/px30.dtsi
index 8812b70f39..75908c5875 100644
--- a/dts/src/arm64/rockchip/px30.dtsi
+++ b/dts/src/arm64/rockchip/px30.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/px30-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,px30";
@@ -113,16 +114,11 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000 950000 1350000>;
-			clock-latency-ns = <40000>;
-			opp-suspend;
-		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1350000>;
 			clock-latency-ns = <40000>;
+			opp-suspend;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
@@ -181,6 +177,55 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+		};
+	};
+
 	xin24m: xin24m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -365,6 +410,33 @@
 			compatible = "rockchip,px30-io-voltage-domain";
 			status = "disabled";
 		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_vopb_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+
+				lvds_vopl_in: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+		};
 	};
 
 	uart1: serial@ff158000 {
@@ -645,6 +717,26 @@
 		};
 	};
 
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	saradc: saradc@ff288000 {
 		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
 		reg = <0x0 0xff288000 0x0 0x100>;
@@ -755,6 +847,18 @@
 		};
 	};
 
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
 	usb20_otg: usb@ff300000 {
 		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
 			     "snps,dwc2";
@@ -820,13 +924,13 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@ff370000 {
+	sdmmc: mmc@ff370000 {
 		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff370000 0x0 0x4000>;
 		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -835,13 +939,13 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@ff380000 {
+	sdio: mmc@ff380000 {
 		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff380000 0x0 0x4000>;
 		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -850,13 +954,13 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff390000 {
+	emmc: mmc@ff390000 {
 		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff390000 0x0 0x4000>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -865,6 +969,57 @@
 		status = "disabled";
 	};
 
+	gpu: gpu@ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		status = "disabled";
+	};
+
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+		};
+	};
+
 	vopb: vop@ff460000 {
 		compatible = "rockchip,px30-vop-big";
 		reg = <0x0 0xff460000 0x0 0xefc>;
@@ -882,6 +1037,16 @@
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
 		};
 	};
 
@@ -914,6 +1079,16 @@
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
 		};
 	};
 
diff --git a/dts/src/arm64/rockchip/rk3308.dtsi b/dts/src/arm64/rockchip/rk3308.dtsi
index 8bdc66c629..116f1900ef 100644
--- a/dts/src/arm64/rockchip/rk3308.dtsi
+++ b/dts/src/arm64/rockchip/rk3308.dtsi
@@ -584,14 +584,14 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@ff480000 {
+	sdmmc: mmc@ff480000 {
 		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff480000 0x0 0x4000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		bus-width = <4>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
@@ -599,27 +599,27 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff490000 {
+	emmc: mmc@ff490000 {
 		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff490000 0x0 0x4000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		bus-width = <8>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		status = "disabled";
 	};
 
-	sdio: dwmmc@ff4a0000 {
+	sdio: mmc@ff4a0000 {
 		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff4a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		bus-width = <4>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		max-frequency = <150000000>;
 		pinctrl-names = "default";
diff --git a/dts/src/arm64/rockchip/rk3328-a1.dts b/dts/src/arm64/rockchip/rk3328-a1.dts
index 76b49f5731..16f1656d52 100644
--- a/dts/src/arm64/rockchip/rk3328-a1.dts
+++ b/dts/src/arm64/rockchip/rk3328-a1.dts
@@ -49,7 +49,8 @@
 
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-beelink-gs1";
 	};
 };
 
diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi
index 91306ebed4..1f53ead52c 100644
--- a/dts/src/arm64/rockchip/rk3328.dtsi
+++ b/dts/src/arm64/rockchip/rk3328.dtsi
@@ -41,6 +41,7 @@
 			reg = <0x0 0x0>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -53,6 +54,7 @@
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -65,6 +67,7 @@
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -77,12 +80,26 @@
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
 		l2: l2-cache0 {
 			compatible = "cache";
 		};
@@ -837,7 +854,7 @@
 		};
 	};
 
-	sdmmc: dwmmc@ff500000 {
+	sdmmc: mmc@ff500000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff500000 0x0 0x4000>;
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -849,7 +866,7 @@
 		status = "disabled";
 	};
 
-	sdio: dwmmc@ff510000 {
+	sdio: mmc@ff510000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff510000 0x0 0x4000>;
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -861,7 +878,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff520000 {
+	emmc: mmc@ff520000 {
 		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff520000 0x0 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/src/arm64/rockchip/rk3368-lion-haikou.dts b/dts/src/arm64/rockchip/rk3368-lion-haikou.dts
index 8251f3c0d0..cbde279ae8 100644
--- a/dts/src/arm64/rockchip/rk3368-lion-haikou.dts
+++ b/dts/src/arm64/rockchip/rk3368-lion-haikou.dts
@@ -83,12 +83,6 @@
 	status = "okay";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-};
-
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";
diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi
index fd86188010..a0df61c619 100644
--- a/dts/src/arm64/rockchip/rk3368.dtsi
+++ b/dts/src/arm64/rockchip/rk3368.dtsi
@@ -204,7 +204,7 @@
 		#clock-cells = <0>;
 	};
 
-	sdmmc: dwmmc@ff0c0000 {
+	sdmmc: mmc@ff0c0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0c0000 0x0 0x4000>;
 		max-frequency = <150000000>;
@@ -218,7 +218,7 @@
 		status = "disabled";
 	};
 
-	sdio0: dwmmc@ff0d0000 {
+	sdio0: mmc@ff0d0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0d0000 0x0 0x4000>;
 		max-frequency = <150000000>;
@@ -232,7 +232,7 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@ff0f0000 {
+	emmc: mmc@ff0f0000 {
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0f0000 0x0 0x4000>;
 		max-frequency = <150000000>;
diff --git a/dts/src/arm64/rockchip/rk3399-firefly.dts b/dts/src/arm64/rockchip/rk3399-firefly.dts
index c706db0ee9..d63faf38cc 100644
--- a/dts/src/arm64/rockchip/rk3399-firefly.dts
+++ b/dts/src/arm64/rockchip/rk3399-firefly.dts
@@ -206,7 +206,7 @@
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
+		regulator-min-microvolt = <430000>;
 		regulator-max-microvolt = <1400000>;
 		vin-supply = <&vcc_sys>;
 	};
@@ -660,7 +660,6 @@
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
@@ -669,9 +668,12 @@
 	vqmmc-supply = &vcc1v8_s3;	/* IO line */
 	vmmc-supply = &vcc_sdio;	/* card's power */
 
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm64/rockchip/rk3399-gru-bob.dts b/dts/src/arm64/rockchip/rk3399-gru-bob.dts
index 9dd3b171e9..e6c1c94c8d 100644
--- a/dts/src/arm64/rockchip/rk3399-gru-bob.dts
+++ b/dts/src/arm64/rockchip/rk3399-gru-bob.dts
@@ -18,7 +18,7 @@
 		     "google,bob", "google,gru", "rockchip,rk3399";
 
 	edp_panel: edp-panel {
-		compatible = "boe,nv101wxmn51", "simple-panel";
+		compatible = "boe,nv101wxmn51";
 		backlight = <&backlight>;
 		power-supply = <&pp3300_disp>;
 
diff --git a/dts/src/arm64/rockchip/rk3399-gru-kevin.dts b/dts/src/arm64/rockchip/rk3399-gru-kevin.dts
index b8066868a3..2bbef9fcbe 100644
--- a/dts/src/arm64/rockchip/rk3399-gru-kevin.dts
+++ b/dts/src/arm64/rockchip/rk3399-gru-kevin.dts
@@ -39,7 +39,7 @@
 	};
 
 	edp_panel: edp-panel {
-		compatible = "sharp,lq123p1jx31", "simple-panel";
+		compatible = "sharp,lq123p1jx31";
 		backlight = <&backlight>;
 		power-supply = <&pp3300_disp>;
 
diff --git a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts
index c133e8d64b..d69a613fb6 100644
--- a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts
+++ b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts
@@ -556,7 +556,6 @@
 &sdmmc {
 	clock-frequency = <150000000>;
 	clock-freq-min-max = <200000 150000000>;
-	supports-sd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -572,7 +571,6 @@
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
-	supports-emmc;
 	non-removable;
 	keep-power-in-suspend;
 	status = "okay";
diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi
index 4944d78a0a..e87a044774 100644
--- a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi
@@ -654,9 +654,12 @@
 	sd-uhs-sdr104;
 	vqmmc-supply = <&vcc1v8_s3>;
 	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts b/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts
index 2a127985ab..e0d75617bb 100644
--- a/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts
+++ b/dts/src/arm64/rockchip/rk3399-nanopc-t4.dts
@@ -94,31 +94,9 @@
 	};
 };
 
-&gpu_thermal {
-	trips {
-		gpu_warm: gpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		gpu_hot: gpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-	cooling-maps {
-		map1 {
-			trip = <&gpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map2 {
-			trip = <&gpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
+&pcie0 {
+	num-lanes = <4>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
 };
 
 &pinctrl {
diff --git a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi
index b788ae4f47..c88018a0ef 100644
--- a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi
@@ -48,7 +48,7 @@
 	};
 
 	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+	vcc1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-boot-on;
@@ -71,6 +71,27 @@
 		vin-supply = <&vcc3v3_sys>;
 	};
 
+	/*
+	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+	 * drives the enable pin, but we can't quite model that.
+	 */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		regulator-name = "vcca0v9_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	/* As above, actually supplied by vcc3v3_sys */
+	vcca1v8_s3: vcca1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcca1v8_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
 	vbus_typec: vbus-typec {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -485,7 +506,9 @@
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	max-link-speed = <2>;
-	num-lanes = <4>;
+	num-lanes = <2>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
 	status = "okay";
 };
 
diff --git a/dts/src/arm64/rockchip/rk3399-orangepi.dts b/dts/src/arm64/rockchip/rk3399-orangepi.dts
index 0541dfce92..9c659f3115 100644
--- a/dts/src/arm64/rockchip/rk3399-orangepi.dts
+++ b/dts/src/arm64/rockchip/rk3399-orangepi.dts
@@ -648,9 +648,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
diff --git a/dts/src/arm64/rockchip/rk3399-roc-pc-mezzanine.dts b/dts/src/arm64/rockchip/rk3399-roc-pc-mezzanine.dts
index d6b3042cff..2acb3d500f 100644
--- a/dts/src/arm64/rockchip/rk3399-roc-pc-mezzanine.dts
+++ b/dts/src/arm64/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -32,8 +32,6 @@
 		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc3v3_pcie_en>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&dc_12v>;
@@ -50,6 +48,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_perst>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
 	status = "okay";
 };
 
@@ -70,3 +70,24 @@
 		};
 	};
 };
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ngff>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi b/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi
index 7e07dae33d..9f225e9c3d 100644
--- a/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi
@@ -110,20 +110,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	/*
-	 * should be placed inside mp8859, but not until mp8859 has
-	 * its own dt-binding.
-	 */
-	dc_12v: mp8859-dcdc1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&vcc_vbus_typec0>;
-	};
-
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -135,6 +121,19 @@
 		vin-supply = <&vcc_1v8>;
 	};
 
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -145,6 +144,16 @@
 		vin-supply = <&dc_12v>;
 	};
 
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
@@ -153,7 +162,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
 		regulator-name = "vcc5v0_host";
-		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
 
@@ -175,7 +183,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc_sys_en>;
 		regulator-name = "vcc_sys";
-		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -188,9 +195,9 @@
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
+		regulator-min-microvolt = <450000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc3v3_sys>;
+		pwm-supply = <&vcc3v3_sys>;
 	};
 };
 
@@ -238,6 +245,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
@@ -245,6 +257,10 @@
 	status = "okay";
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -360,7 +376,6 @@
 
 			vcc_sdio: LDO_REG4 {
 				regulator-name = "vcc_sdio";
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
@@ -465,8 +480,6 @@
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
 		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vcc3v3_sys>;
 
 		regulator-state-mem {
@@ -519,6 +532,24 @@
 		vbus-supply = <&vcc_vbus_typec0>;
 		status = "okay";
 	};
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vcc_vbus_typec0>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <12000000>;
+			};
+		};
+	};
 };
 
 &i2s0 {
@@ -559,7 +590,7 @@
 
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -593,6 +624,12 @@
 		};
 	};
 
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -645,24 +682,34 @@
 
 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 
 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };
diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts
index 188d9dfc29..3923ec01ef 100644
--- a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts
+++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts
@@ -53,6 +53,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -463,6 +473,22 @@
 	pmu1830-supply = <&vcc_3v0>;
 };
 
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcc_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {
diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dtsi b/dts/src/arm64/rockchip/rk3399-rock960.dtsi
index c7d48d41e1..b69f0f2cbd 100644
--- a/dts/src/arm64/rockchip/rk3399-rock960.dtsi
+++ b/dts/src/arm64/rockchip/rk3399-rock960.dtsi
@@ -76,6 +76,15 @@
 		regulator-always-on;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
 };
 
 &cpu_l0 {
@@ -384,6 +393,8 @@
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };
diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64-v2.dts b/dts/src/arm64/rockchip/rk3399-rockpro64-v2.dts
new file mode 100644
index 0000000000..304e3c5139
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3399-rockpro64-v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.0";
+	compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@10 {
+		compatible = "everest,es8316";
+		reg = <0x10>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dts b/dts/src/arm64/rockchip/rk3399-rockpro64.dts
index 7f4b2eba31..4b42717800 100644
--- a/dts/src/arm64/rockchip/rk3399-rockpro64.dts
+++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dts
@@ -2,481 +2,18 @@
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
  */
 
 /dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rockpro64.dtsi"
 
 / {
-	model = "Pine64 RockPro64";
-	compatible = "pine64,rockpro64", "rockchip,rk3399";
-
-	chosen {
-		stdout-path = "serial2:1500000n8";
-	};
-
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		power {
-			debounce-interval = <100>;
-			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Key Power";
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
-
-		work-led {
-			label = "work";
-			default-state = "on";
-			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-		};
-
-		diy-led {
-			label = "diy";
-			default-state = "off";
-			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fan: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		fan-supply = <&vcc12v_dcin>;
-		pwms = <&pwm1 0 50000 0>;
-	};
-
-	sdio_pwrseq: sdio-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h>;
-
-		/*
-		 * On the module itself this is one of these (depending
-		 * on the actual card populated):
-		 * - SDIO_RESET_L_WL_REG_ON
-		 * - PDN (power down when low)
-		 */
-		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		label = "rockchip,rk3399";
-		dais = <&i2s1_p0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc1v8_s3";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_1v8>;
-	};
-
-	vcc3v3_pcie: vcc3v3-pcie-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie_pwr_en>;
-		regulator-name = "vcc3v3_pcie";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc3v3_sys: vcc3v3-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-
-	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
-	vcc5v0_host: vcc5v0-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en>;
-		regulator-name = "vcc5v0_host";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_typec: vcc5v0-typec-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec_en>;
-		regulator-name = "vcc5v0_typec";
-		regulator-always-on;
-		vin-supply = <&vcc5v0_usb>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vcc5v0_usb: vcc5v0-usb {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_usb";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
-	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 1>;
-		regulator-name = "vdd_log";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1700000>;
-		vin-supply = <&vcc5v0_sys>;
-	};
-};
-
-&cpu_l0 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
-	cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
-	cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-	status = "okay";
-};
-
-&hdmi_sound {
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <168>;
-	i2c-scl-falling-time-ns = <4>;
-	status = "okay";
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc5v0_sys>;
-		vcc2-supply = <&vcc5v0_sys>;
-		vcc3-supply = <&vcc5v0_sys>;
-		vcc4-supply = <&vcc5v0_sys>;
-		vcc6-supply = <&vcc5v0_sys>;
-		vcc7-supply = <&vcc5v0_sys>;
-		vcc8-supply = <&vcc3v3_sys>;
-		vcc9-supply = <&vcc5v0_sys>;
-		vcc10-supply = <&vcc5v0_sys>;
-		vcc11-supply = <&vcc5v0_sys>;
-		vcc12-supply = <&vcc3v3_sys>;
-		vddio-supply = <&vcca_1v8>;
-
-		regulators {
-			vdd_center: DCDC_REG1 {
-				regulator-name = "vdd_center";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_cpu_l: DCDC_REG2 {
-				regulator-name = "vdd_cpu_l";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_1v8: DCDC_REG4 {
-				regulator-name = "vcc_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc1v8_dvp: LDO_REG1 {
-				regulator-name = "vcc1v8_dvp";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v0_touch: LDO_REG2 {
-				regulator-name = "vcc3v0_touch";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcca_1v8: LDO_REG3 {
-				regulator-name = "vcca_1v8";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sdio: LDO_REG4 {
-				regulator-name = "vcc_sdio";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcca3v0_codec: LDO_REG5 {
-				regulator-name = "vcca3v0_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_1v5: LDO_REG6 {
-				regulator-name = "vcc_1v5";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1500000>;
-				};
-			};
-
-			vcca1v8_codec: LDO_REG7 {
-				regulator-name = "vcca1v8_codec";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc_3v0: LDO_REG8 {
-				regulator-name = "vcc_3v0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-
-			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
-				regulator-name = "vcc3v3_s3";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vcc3v3_s0: SWITCH_REG2 {
-				regulator-name = "vcc3v3_s0";
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-
-	vdd_cpu_b: regulator@40 {
-		compatible = "silergy,syr827";
-		reg = <0x40>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
-		regulator-name = "vdd_cpu_b";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
-
-	vdd_gpu: regulator@41 {
-		compatible = "silergy,syr828";
-		reg = <0x41>;
-		fcs,suspend-voltage-selector = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <712500>;
-		regulator-max-microvolt = <1500000>;
-		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc5v0_sys>;
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-	};
+	model = "Pine64 RockPro64 v2.1";
+	compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
 };
 
 &i2c1 {
-	i2c-scl-rising-time-ns = <300>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-
 	es8316: codec@11 {
 		compatible = "everest,es8316";
 		reg = <0x11>;
@@ -491,291 +28,3 @@
 		};
 	};
 };
-
-&i2c3 {
-	i2c-scl-rising-time-ns = <450>;
-	i2c-scl-falling-time-ns = <15>;
-	status = "okay";
-};
-
-&i2c4 {
-	i2c-scl-rising-time-ns = <600>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	fusb0: typec-portc@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int>;
-		vbus-supply = <&vcc5v0_typec>;
-		status = "okay";
-	};
-};
-
-&i2s0 {
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <8>;
-	status = "okay";
-};
-
-&i2s1 {
-	rockchip,playback-channels = <2>;
-	rockchip,capture-channels = <2>;
-	status = "okay";
-
-	i2s1_p0: port {
-		i2s1_p0_0: endpoint {
-			dai-format = "i2s";
-			mclk-fs = <256>;
-			remote-endpoint = <&es8316_p0_0>;
-		};
-	};
-};
-
-&i2s2 {
-	status = "okay";
-};
-
-&io_domains {
-	status = "okay";
-
-	bt656-supply = <&vcc1v8_dvp>;
-	audio-supply = <&vcc_3v0>;
-	sdmmc-supply = <&vcc_sdio>;
-	gpio1830-supply = <&vcc_3v0>;
-};
-
-&pcie0 {
-	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-	num-lanes = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_perst>;
-	vpcie12v-supply = <&vcc12v_dcin>;
-	vpcie3v3-supply = <&vcc3v3_pcie>;
-	status = "okay";
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pmu_io_domains {
-	pmu1830-supply = <&vcc_3v0>;
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	fusb302x {
-		fusb0_int: fusb0-int {
-			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	leds {
-		work_led_gpio: work_led-gpio {
-			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		diy_led_gpio: diy_led-gpio {
-			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pcie {
-		pcie_perst: pcie-perst {
-			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
-		pcie_pwr_en: pcie-pwr-en {
-			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		vsel1_gpio: vsel1-gpio {
-			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
-		vsel2_gpio: vsel2-gpio {
-			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-	};
-
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
-	usb-typec {
-		vcc5v0_typec_en: vcc5v0_typec_en {
-			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb2 {
-		vcc5v0_host_en: vcc5v0-host-en {
-			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&pwm0 {
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&saradc {
-	vref-supply = <&vcca1v8_s3>;
-	status = "okay";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-sd-highspeed;
-	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	max-frequency = <150000000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-	status = "okay";
-};
-
-&sdhci {
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	non-removable;
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-	};
-};
-
-&tcphy0 {
-	status = "okay";
-};
-
-&tcphy1 {
-	status = "okay";
-};
-
-&tsadc {
-	/* tshut mode 0:CRU 1:GPIO */
-	rockchip,hw-tshut-mode = <1>;
-	/* tshut polarity 0:LOW 1:HIGH */
-	rockchip,hw-tshut-polarity = <1>;
-	status = "okay";
-};
-
-&u2phy0 {
-	status = "okay";
-
-	u2phy0_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&u2phy1 {
-	status = "okay";
-
-	u2phy1_otg: otg-port {
-		status = "okay";
-	};
-
-	u2phy1_host: host-port {
-		phy-supply = <&vcc5v0_host>;
-		status = "okay";
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts>;
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
-&usbdrd3_0 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_0 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&usbdrd3_1 {
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi b/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi
new file mode 100644
index 0000000000..9bca258012
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "rockchip,rk3399";
+		dais = <&i2s1_p0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1700000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_gpio>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_gpio>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+
+	i2s1_p0: port {
+		i2s1_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_perst: pcie-perst {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts b/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts
index 808ea77f95..b4d8f60b7e 100644
--- a/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts
+++ b/dts/src/arm64/rockchip/rk3399-sapphire-excavator.dts
@@ -84,7 +84,7 @@
 	};
 
 	edp_panel: edp-panel {
-		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		compatible ="lg,lp079qx1-sp0v";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi
index e62ea0e2b6..33cc21fcf4 100644
--- a/dts/src/arm64/rockchip/rk3399.dtsi
+++ b/dts/src/arm64/rockchip/rk3399.dtsi
@@ -291,7 +291,7 @@
 		status = "disabled";
 	};
 
-	sdio0: dwmmc@fe310000 {
+	sdio0: mmc@fe310000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe310000 0x0 0x4000>;
@@ -307,7 +307,7 @@
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@fe320000 {
+	sdmmc: mmc@fe320000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe320000 0x0 0x4000>;
@@ -828,6 +828,14 @@
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -1887,6 +1895,7 @@
 			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "gpu", "job", "mmu";
 		clocks = <&cru ACLK_GPU>;
+		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};
diff --git a/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts b/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts
new file mode 100644
index 0000000000..b42f941795
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+};
diff --git a/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi b/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 0000000000..0a516334f1
--- /dev/null
+++ b/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/dts/src/arm64/socionext/uniphier-ld11.dtsi b/dts/src/arm64/socionext/uniphier-ld11.dtsi
index 8ec40a0b8b..5b18bda9c5 100644
--- a/dts/src/arm64/socionext/uniphier-ld11.dtsi
+++ b/dts/src/arm64/socionext/uniphier-ld11.dtsi
@@ -633,7 +633,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi
index b658f2b641..f2dc5f6950 100644
--- a/dts/src/arm64/socionext/uniphier-ld20.dtsi
+++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi
@@ -937,7 +937,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi
index d6f6cee4d5..73e7e1203b 100644
--- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi
+++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi
@@ -795,7 +795,8 @@
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
 			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
-			resets = <&sys_rst 2>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
 		};
 	};
 };
diff --git a/dts/src/arm64/sprd/sc9863a.dtsi b/dts/src/arm64/sprd/sc9863a.dtsi
new file mode 100644
index 0000000000..cd80756c88
--- /dev/null
+++ b/dts/src/arm64/sprd/sc9863a.dtsi
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "arm,psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		gic: interrupt-controller@14000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x14000000 0 0x20000>,	/* GICD */
+			      <0x0 0x14040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		funnel@10001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_little_out_port: endpoint {
+						remote-endpoint =
+						<&etf_little_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_little_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_little_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_little_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_little_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@12002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_little_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port0>;
+					};
+				};
+			};
+
+			in-port {
+				port {
+					etf_little_in: endpoint {
+						remote-endpoint =
+						<&funnel_little_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@12003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_big_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_ca55_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_ca55_in_port0: endpoint {
+						remote-endpoint =
+						<&etf_little_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_ca55_in_port1: endpoint {
+						remote-endpoint =
+						<&etf_big_out>;
+					};
+				};
+			};
+		};
+
+		funnel@12005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_big_out_port: endpoint {
+						remote-endpoint =
+						<&etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_big_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_big_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_big_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_big_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@13040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@13440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port3>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/dts/src/arm64/sprd/sharkl3.dtsi b/dts/src/arm64/sprd/sharkl3.dtsi
new file mode 100644
index 0000000000..0222128b10
--- /dev/null
+++ b/dts/src/arm64/sprd/sharkl3.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart4: serial@400000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x400000 0x100>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+};
diff --git a/dts/src/arm64/sprd/sp9863a-1h10.dts b/dts/src/arm64/sprd/sp9863a-1h10.dts
new file mode 100644
index 0000000000..5c32c15963
--- /dev/null
+++ b/dts/src/arm64/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+	model = "Spreadtrum SP9863A-1H10 Board";
+
+	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi
index efb2457992..e5df20a2d2 100644
--- a/dts/src/arm64/ti/k3-am65-main.dtsi
+++ b/dts/src/arm64/ti/k3-am65-main.dtsi
@@ -51,17 +51,6 @@
 		};
 	};
 
-	secure_proxy_main: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x32c00000 0x00 0x100000>,
-		      <0x00 0x32400000 0x00 0x100000>,
-		      <0x00 0x32800000 0x00 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
 	serdes0: serdes@900000 {
 		compatible = "ti,phy-am654-serdes";
 		reg = <0x0 0x900000 0x0 0x2000>;
@@ -385,11 +374,15 @@
 		ti,sci-rm-range-girq = <0x1>;
 	};
 
-	cbass_main_navss: interconnect0 {
-		compatible = "simple-bus";
+	main_navss {
+		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <118>;
 
 		intr_main_navss: interrupt-controller1 {
 			compatible = "ti,sci-intr";
@@ -414,6 +407,17 @@
 			ti,sci-rm-range-global-event = <0x1>;
 		};
 
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hwspinlock: spinlock@30e00000 {
 			compatible = "ti,am654-hwspinlock";
 			reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -527,6 +531,41 @@
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&intr_main_navss>;
 		};
+
+		ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <818>;
+			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+			ti,dma-ring-reset-quirk;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <187>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,am654-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <188>;
+			ti,ringacc = <&ringacc>;
+
+			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+						<0x2>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+						<0x5>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+		};
 	};
 
 	main_gpio0:  main_gpio0@600000 {
@@ -624,4 +663,83 @@
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	cal: cal@6f03000 {
+		compatible = "ti,am654-cal";
+		reg = <0x0 0x06f03000 0x0 0x400>,
+		      <0x0 0x06f03800 0x0 0x40>;
+		reg-names = "cal_top",
+			    "cal_rx_core0";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		ti,camerrx-control = <&scm_conf 0x40c0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 2 0>;
+		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+			};
+		};
+	};
 };
diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi
index 7bdf5342f5..92629cbdc1 100644
--- a/dts/src/arm64/ti/k3-am65-mcu.dtsi
+++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi
@@ -6,6 +6,14 @@
  */
 
 &cbass_mcu {
+	mcu_conf: scm_conf@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+	};
+
 	mcu_uart0: serial@40a00000 {
 		compatible = "ti,am654-uart";
 			reg = <0x00 0x40a00000 0x00 0x100>;
@@ -95,4 +103,88 @@
 			compatible = "ti,am654-adc", "ti,am3359-adc";
 		};
 	};
+
+	mcu_navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
+			ti,dma-ring-reset-quirk;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+						<0x2>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */
+						<0x4>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
+		};
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
 };
diff --git a/dts/src/arm64/ti/k3-am65.dtsi b/dts/src/arm64/ti/k3-am65.dtsi
index 6dfccd5d56..aea36e29dd 100644
--- a/dts/src/arm64/ti/k3-am65.dtsi
+++ b/dts/src/arm64/ti/k3-am65.dtsi
@@ -74,13 +74,18 @@
 			 /* MCUSS Range */
 			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
 			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
 			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
 			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
 			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
 			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
 			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
-			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
 
 		cbass_mcu: interconnect@28380000 {
 			compatible = "simple-bus";
@@ -88,13 +93,17 @@
 			#size-cells = <2>;
 			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
 				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
 				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
 				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
 				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
 				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
 				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
 				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
-				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
 
 			cbass_wakeup: interconnect@42040000 {
 				compatible = "simple-bus";
diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts
index 8a85b482ad..1700996800 100644
--- a/dts/src/arm64/ti/k3-am654-base-board.dts
+++ b/dts/src/arm64/ti/k3-am654-base-board.dts
@@ -53,6 +53,12 @@
 			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &wkup_pmx0 {
@@ -69,6 +75,29 @@
 			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
 		>;
 	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	wkup_pca554_default: wkup_pca554_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+
+		>;
+	};
 };
 
 &main_pmx0 {
@@ -164,6 +193,12 @@
 		reg = <0x39>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wkup_pca554_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 };
 
@@ -184,6 +219,23 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 };
 
 &main_i2c2 {
@@ -339,3 +391,31 @@
 &mailbox0_cluster11 {
 	status = "disabled";
 };
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
index 2a3cd61745..7a5c3d4ada 100644
--- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
+++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts
@@ -67,6 +67,46 @@
 			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
 		>;
 	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+		>;
+	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		 >;
+	};
 };
 
 &wkup_pmx0 {
@@ -75,6 +115,19 @@
 			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
 		>;
 	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
 };
 
 &wkup_uart0 {
@@ -279,3 +332,100 @@
 	dr_mode = "host";
 	maximum-speed = "high-speed";
 };
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <400000>;
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi
index 1e4c2b78d6..0b9d14b838 100644
--- a/dts/src/arm64/ti/k3-j721e-main.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-main.dtsi
@@ -40,16 +40,6 @@
 		};
 	};
 
-	smmu0: smmu@36600000 {
-		compatible = "arm,smmu-v3";
-		reg = <0x0 0x36600000 0x0 0x100000>;
-		interrupt-parent = <&gic500>;
-		interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "eventq", "gerror";
-		#iommu-cells = <1>;
-	};
-
 	main_gpio_intr: interrupt-controller0 {
 		compatible = "ti,sci-intr";
 		ti,intr-trigger-type = <1>;
@@ -61,11 +51,15 @@
 		ti,sci-rm-range-girq = <0x1>;
 	};
 
-	cbass_main_navss: interconnect0 {
-		compatible = "simple-bus";
+	main_navss {
+		compatible = "simple-mfd";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <199>;
 
 		main_navss_intr: interrupt-controller1 {
 			compatible = "ti,sci-intr";
@@ -90,6 +84,27 @@
 			ti,sci-rm-range-global-event = <0xd>;
 		};
 
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu0: smmu@36600000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x36600000 0x0 0x100000>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			#iommu-cells = <1>;
+		};
+
 		hwspinlock: spinlock@30e00000 {
 			compatible = "ti,am654-hwspinlock";
 			reg = <0x00 0x30e00000 0x00 0x1000>;
@@ -203,17 +218,42 @@
 			ti,mbox-num-fifos = <16>;
 			interrupt-parent = <&main_navss_intr>;
 		};
-	};
 
-	secure_proxy_main: mailbox@32c00000 {
-		compatible = "ti,am654-secure-proxy";
-		#mbox-cells = <1>;
-		reg-names = "target_data", "rt", "scfg";
-		reg = <0x00 0x32c00000 0x00 0x100000>,
-		      <0x00 0x32400000 0x00 0x100000>,
-		      <0x00 0x32800000 0x00 0x100000>;
-		interrupt-names = "rx_011";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x3c000000 0x0 0x400000>,
+				<0x0 0x38000000 0x0 0x400000>,
+				<0x0 0x31120000 0x0 0x100>,
+				<0x0 0x33000000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg =	<0x0 0x31150000 0x0 0x100>,
+				<0x0 0x34000000 0x0 0x100000>,
+				<0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
 	};
 
 	main_pmx0: pinmux@11c000 {
@@ -596,4 +636,331 @@
 			dr_mode = "otg";
 		};
 	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 0>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 0>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 0>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 0>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 0>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 0>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 0>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x0 0x4e80000 0x0 0x100>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 277 1>;
+		assigned-clocks = <&k3_clks 277 1>;
+		assigned-clock-parents = <&k3_clks 277 4>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x0 0x4e84000 0x0 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+			clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 174 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 175 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 176 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+			<0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 177 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+			<0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 178 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp5: mcasp@2b50000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b50000 0x0 0x2000>,
+			<0x0 0x02b58000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 179 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp6: mcasp@2b60000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b60000 0x0 0x2000>,
+			<0x0 0x02b68000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 180 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp7: mcasp@2b70000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b70000 0x0 0x2000>,
+			<0x0 0x02b78000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 181 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp8: mcasp@2b80000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b80000 0x0 0x2000>,
+			<0x0 0x02b88000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 182 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp9: mcasp@2b90000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b90000 0x0 0x2000>,
+			<0x0 0x02b98000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 183 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp10: mcasp@2ba0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02ba0000 0x0 0x2000>,
+			<0x0 0x02ba8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 184 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
+
+	mcasp11: mcasp@2bb0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02bb0000 0x0 0x2000>,
+			<0x0 0x02bb8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 185 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+
+		status = "disabled";
+	};
 };
diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
index 555dc7b7ae..16c874bfd4 100644
--- a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi
@@ -121,4 +121,153 @@
 		clocks = <&k3_clks 114 0>;
 		clock-names = "gpio";
 	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 0>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 0>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 0>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 104 0>;
+			power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 1>;
+		assigned-clocks = <&k3_clks 1 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "adc_tsc_fck";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
 };
diff --git a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi
index 1884fc7014..7680109ca6 100644
--- a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi
+++ b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi
@@ -27,3 +27,48 @@
 		};
 	};
 };
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/dts/src/arm64/ti/k3-j721e.dtsi b/dts/src/arm64/ti/k3-j721e.dtsi
index ee5470edb4..027bd1feba 100644
--- a/dts/src/arm64/ti/k3-j721e.dtsi
+++ b/dts/src/arm64/ti/k3-j721e.dtsi
@@ -130,7 +130,7 @@
 			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
 			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
-			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
diff --git a/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi b/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
new file mode 100644
index 0000000000..9868ca15df
--- /dev/null
+++ b/dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+	pss_ref_clk: pss_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	video_clk: video_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	pss_alt_ref_clk: pss_alt_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gt_crx_ref_clk: gt_crx_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <108000000>;
+	};
+
+	aux_ref_clk: aux_ref_clk {
+		u-boot,dm-pre-reloc;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can0 {
+	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+	clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan1 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gem3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+};
+
+&gpio {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+	clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+	clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+	clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&sata {
+	clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sdhci1 {
+	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi0 {
+	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+	clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&usb0 {
+	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&usb1 {
+	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+	clocks = <&zynqmp_clk WDT>;
+};
diff --git a/dts/src/arm64/xilinx/zynqmp-clk.dtsi b/dts/src/arm64/xilinx/zynqmp-clk.dtsi
deleted file mode 100644
index 306ad2157c..0000000000
--- a/dts/src/arm64/xilinx/zynqmp-clk.dtsi
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Clock specification for Xilinx ZynqMP
- *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-/ {
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	clk125: clk125 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-	};
-
-	clk200: clk200 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <200000000>;
-	};
-
-	clk250: clk250 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <250000000>;
-	};
-
-	clk300: clk300 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <300000000>;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-
-	dp_aclk: clock0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-		clock-accuracy = <100>;
-	};
-
-	dp_aud_clk: clock1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-		clock-accuracy = <100>;
-	};
-
-	dpdma_clk: dpdma-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <533000000>;
-	};
-
-	drm_clock: drm-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <262750000>;
-		clock-accuracy = <0x64>;
-	};
-};
-
-&can0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&can1 {
-	clocks = <&clk100 &clk100>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&lpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem1 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem2 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gem3 {
-	clocks = <&clk125>, <&clk125>, <&clk125>;
-};
-
-&gpio {
-	clocks = <&clk100>;
-};
-
-&i2c0 {
-	clocks = <&clk100>;
-};
-
-&i2c1 {
-	clocks = <&clk100>;
-};
-
-&sata {
-	clocks = <&clk250>;
-};
-
-&sdhci0 {
-	clocks = <&clk200 &clk200>;
-};
-
-&sdhci1 {
-	clocks = <&clk200 &clk200>;
-};
-
-&spi0 {
-	clocks = <&clk200 &clk200>;
-};
-
-&spi1 {
-	clocks = <&clk200 &clk200>;
-};
-
-&uart0 {
-	clocks = <&clk100 &clk100>;
-};
-
-&uart1 {
-	clocks = <&clk100 &clk100>;
-};
-
-&usb0 {
-	clocks = <&clk250>, <&clk250>;
-};
-
-&usb1 {
-	clocks = <&clk250>, <&clk250>;
-};
-
-&watchdog0 {
-	clocks = <&clk250>;
-};
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1232-revA.dts b/dts/src/arm64/xilinx/zynqmp-zc1232-revA.dts
index 0f7b4cf607..2e05fa4169 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1232-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1232-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1232
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP ZC1232 RevA";
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1254-revA.dts b/dts/src/arm64/xilinx/zynqmp-zc1254-revA.dts
index 9092828f92..3d0aaa02f1 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1254-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1254-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1254
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP ZC1254 RevA";
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1275-revA.dts b/dts/src/arm64/xilinx/zynqmp-zc1275-revA.dts
index 4f404c580e..66a90483b0 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1275-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1275-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZC1275
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP ZC1275 RevA";
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 9a3e39d129..69f6e46107 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm015-dc1
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -73,7 +73,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 {
+	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
@@ -128,4 +128,5 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 2421ec71a2..4a86efa32d 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm016-dc2
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -84,7 +84,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@5 {
+	phy0: ethernet-phy@5 {
 		reg = <5>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -123,7 +123,7 @@
 	status = "okay";
 	num-cs = <1>;
 
-	spi0_flash0: flash0@0 {
+	spi0_flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25wf080", "jedec,spi-nor";
@@ -141,7 +141,7 @@
 	status = "okay";
 	num-cs = <1>;
 
-	spi1_flash0: flash0@0 {
+	spi1_flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
@@ -158,6 +158,7 @@
 /* ULPI SMSC USB3320 */
 &usb1 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &uart0 {
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts
index 7a49deeae6..4ea6ef5a7f 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm017-dc3
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP zc1751-xm017-dc3 RevA";
@@ -73,7 +73,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 { /* VSC8211 */
+	phy0: ethernet-phy@0 { /* VSC8211 */
 		reg = <0>;
 	};
 };
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 54c7b4f1d1..2366cd9f09 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm018-dc4
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 
 / {
 	model = "ZynqMP zc1751-xm018-dc4";
diff --git a/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts b/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b8b5ff1381..41934e3525 100644
--- a/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP zc1751-xm019-dc5
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
  * Michal Simek <michal.simek@xilinx.com>
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -74,7 +74,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@0 {
+	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts
index e5699d0d91..d60110ad83 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU100 revC
  *
- * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  * Nathalie Chan King Choy
@@ -11,7 +11,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -103,6 +103,11 @@
 		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
 		post-power-on-delay-ms = <10>;
 	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+	};
 };
 
 &dcc {
@@ -191,8 +196,9 @@
 			#size-cells = <0>;
 			reg = <5>;
 			/* PS_PMBUS */
-			ina226@40 { /* u35 */
+			u35: ina226@40 { /* u35 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
 				reg = <0x40>;
 				shunt-resistor = <10000>;
 				/* MIO31 is alert which should be routed to PMUFW */
@@ -226,7 +232,6 @@
 &sdhci0 {
 	status = "okay";
 	no-1-8-v;
-	broken-cd; /* CD has to be enabled by default */
 	disable-wp;
 };
 
@@ -251,11 +256,13 @@
 &spi0 { /* Low Speed connector */
 	status = "okay";
 	label = "LS-SPI0";
+	num-cs = <1>;
 };
 
 &spi1 { /* High Speed connector */
 	status = "okay";
 	label = "HS-SPI1";
+	num-cs = <1>;
 };
 
 &uart0 {
@@ -274,11 +281,13 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 /* ULPI SMSC USB3320 */
 &usb1 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts
index 2a3b66547c..4f80172156 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu102-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU102 RevA
  *
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -59,6 +59,79 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
 };
 
 &can1 {
@@ -105,7 +178,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@21 {
+	phy0: ethernet-phy@21 {
 		reg = <21>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -125,21 +198,11 @@
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - PS_GTR_LAN_SEL0
-		 * 1 - PS_GTR_LAN_SEL1
-		 * 2 - PS_GTR_LAN_SEL2
-		 * 3 - PS_GTR_LAN_SEL3
-		 * 4 - PCI_CLK_DIR_SEL
-		 * 5 - IIC_MUX_RESET_B
-		 * 6 - GEM3_EXP_RESET_B
-		 * 7, 10 - 17 - not connected
-		 */
-
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
 		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
@@ -169,27 +232,12 @@
 	tca6416_u61: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - VCCPSPLL_EN
-		 * 1 - MGTRAVCC_EN
-		 * 2 - MGTRAVTT_EN
-		 * 3 - VCCPSDDRPLL_EN
-		 * 4 - MIO26_PMU_INPUT_LS
-		 * 5 - PL_PMBUS_ALERT
-		 * 6 - PS_PMBUS_ALERT
-		 * 7 - MAXIM_PMBUS_ALERT
-		 * 10 - PL_DDR4_VTERM_EN
-		 * 11 - PL_DDR4_VPP_2V5_EN
-		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
-		 * 13 - PS_DIMM_SUSPEND_EN
-		 * 14 - PS_DDR4_VTERM_EN
-		 * 15 - PS_DDR4_VPP_2V5_EN
-		 * 16 - 17 - not connected
-		 */
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
 	};
 
 	i2c-mux@75 { /* u60 */
@@ -202,53 +250,73 @@
 			#size-cells = <0>;
 			reg = <0>;
 			/* PS_PMBUS */
-			ina226@40 { /* u76 */
+			u76: ina226@40 { /* u76 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
 				reg = <0x40>;
 				shunt-resistor = <5000>;
 			};
-			ina226@41 { /* u77 */
+			u77: ina226@41 { /* u77 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u78 */
+			u78: ina226@42 { /* u78 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u87 */
+			u87: ina226@43 { /* u87 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u85 */
+			u85: ina226@44 { /* u85 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u86 */
+			u86: ina226@45 { /* u86 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u93 */
+			u93: ina226@46 { /* u93 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u88 */
+			u88: ina226@47 { /* u88 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4a { /* u15 */
+			u15: ina226@4a { /* u15 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
 				reg = <0x4a>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4b { /* u92 */
+			u92: ina226@4b { /* u92 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
 				reg = <0x4b>;
 				shunt-resistor = <5000>;
 			};
@@ -258,43 +326,59 @@
 			#size-cells = <0>;
 			reg = <1>;
 			/* PL_PMBUS */
-			ina226@40 { /* u79 */
+			u79: ina226@40 { /* u79 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
 				reg = <0x40>;
 				shunt-resistor = <2000>;
 			};
-			ina226@41 { /* u81 */
+			u81: ina226@41 { /* u81 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u80 */
+			u80: ina226@42 { /* u80 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u84 */
+			u84: ina226@43 { /* u84 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u16 */
+			u16: ina226@44 { /* u16 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u65 */
+			u65: ina226@45 { /* u65 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u74 */
+			u74: ina226@46 { /* u74 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u75 */
+			u75: ina226@47 { /* u75 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
@@ -414,6 +498,7 @@
 				temperature-stability = <50>;
 				factory-fout = <300000000>;
 				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
 			};
 		};
 		i2c@3 {
@@ -427,6 +512,7 @@
 				temperature-stability = <50>; /* copy from zc702 */
 				factory-fout = <156250000>;
 				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
 			};
 		};
 		i2c@4 {
@@ -540,6 +626,7 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu102-revB.dts b/dts/src/arm64/xilinx/zynqmp-zcu102-revB.dts
index 1780ed237d..d9ad8a4b20 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu102-revB.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu102-revB.dts
@@ -16,7 +16,7 @@
 
 &gem3 {
 	phy-handle = <&phyc>;
-	phyc: phy@c {
+	phyc: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -24,7 +24,7 @@
 		ti,dp83867-rxctrl-strap-quirk;
 	};
 	/* Cleanup from RevA */
-	/delete-node/ phy@21;
+	/delete-node/ ethernet-phy@21;
 };
 
 /* Fix collision with u61 */
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts
index 8f45614640..7a4614e3f5 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU104
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -50,7 +50,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -118,9 +118,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			tca6416_u97: gpio@21 {
+			tca6416_u97: gpio@20 {
 				compatible = "ti,tca6416";
-				reg = <0x21>;
+				reg = <0x20>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				/*
@@ -189,6 +189,7 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts
index 93ce7eb814..6e9efe2338 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu106-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU106
  *
- * (C) Copyright 2016, Xilinx, Inc.
+ * (C) Copyright 2016 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -59,6 +59,79 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
 };
 
 &can1 {
@@ -106,7 +179,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -177,53 +250,73 @@
 			#size-cells = <0>;
 			reg = <0>;
 			/* PS_PMBUS */
-			ina226@40 { /* u76 */
+			u76: ina226@40 { /* u76 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
 				reg = <0x40>;
 				shunt-resistor = <5000>;
 			};
-			ina226@41 { /* u77 */
+			u77: ina226@41 { /* u77 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u78 */
+			u78: ina226@42 { /* u78 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u87 */
+			u87: ina226@43 { /* u87 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u85 */
+			u85: ina226@44 { /* u85 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u86 */
+			u86: ina226@45 { /* u86 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u93 */
+			u93: ina226@46 { /* u93 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u88 */
+			u88: ina226@47 { /* u88 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4a { /* u15 */
+			u15: ina226@4a { /* u15 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
 				reg = <0x4a>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4b { /* u92 */
+			u92: ina226@4b { /* u92 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
 				reg = <0x4b>;
 				shunt-resistor = <5000>;
 			};
@@ -233,43 +326,59 @@
 			#size-cells = <0>;
 			reg = <1>;
 			/* PL_PMBUS */
-			ina226@40 { /* u79 */
+			u79: ina226@40 { /* u79 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
 				reg = <0x40>;
 				shunt-resistor = <2000>;
 			};
-			ina226@41 { /* u81 */
+			u81: ina226@41 { /* u81 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u80 */
+			u80: ina226@42 { /* u80 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u84 */
+			u84: ina226@43 { /* u84 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@44 { /* u16 */
+			u16: ina226@44 { /* u16 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
 				reg = <0x44>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u65 */
+			u65: ina226@45 { /* u65 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u74 */
+			u74: ina226@46 { /* u74 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
 				reg = <0x46>;
 				shunt-resistor = <5000>;
 			};
-			ina226@47 { /* u75 */
+			u75: ina226@47 { /* u75 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
@@ -388,6 +497,7 @@
 				temperature-stability = <50>;
 				factory-fout = <300000000>;
 				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
 			};
 		};
 		i2c@3 {
@@ -401,6 +511,7 @@
 				temperature-stability = <50>; /* copy from zc702 */
 				factory-fout = <156250000>;
 				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
 			};
 		};
 		i2c@4 {
@@ -514,6 +625,7 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
 
 &watchdog0 {
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts b/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts
index 8bb0001a02..2e92634c77 100644
--- a/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts
+++ b/dts/src/arm64/xilinx/zynqmp-zcu111-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU111
  *
- * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ * (C) Copyright 2017 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -10,7 +10,7 @@
 /dts-v1/;
 
 #include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -59,6 +59,63 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	ina226-u67 {
+		compatible = "iio-hwmon";
+		io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+	};
+	ina226-u59 {
+		compatible = "iio-hwmon";
+		io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+	ina226-u69 {
+		compatible = "iio-hwmon";
+		io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+	};
+	ina226-u66 {
+		compatible = "iio-hwmon";
+		io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+	};
+	ina226-u71 {
+		compatible = "iio-hwmon";
+		io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u73 {
+		compatible = "iio-hwmon";
+		io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
 };
 
 &dcc {
@@ -101,7 +158,7 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	phy0: phy@c {
+	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
 		ti,tx-internal-delay = <0xa>;
@@ -152,73 +209,101 @@
 			reg = <0>;
 			/* PS_PMBUS */
 			/* PMBUS_ALERT done via pca9544 */
-			ina226@40 { /* u67 */
+			u67: ina226@40 { /* u67 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u67";
 				reg = <0x40>;
 				shunt-resistor = <2000>;
 			};
-			ina226@41 { /* u59 */
+			u59: ina226@41 { /* u59 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u59";
 				reg = <0x41>;
 				shunt-resistor = <5000>;
 			};
-			ina226@42 { /* u61 */
+			u61: ina226@42 { /* u61 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
 				reg = <0x42>;
 				shunt-resistor = <5000>;
 			};
-			ina226@43 { /* u60 */
+			u60: ina226@43 { /* u60 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
 				reg = <0x43>;
 				shunt-resistor = <5000>;
 			};
-			ina226@45 { /* u64 */
+			u64: ina226@45 { /* u64 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
 				reg = <0x45>;
 				shunt-resistor = <5000>;
 			};
-			ina226@46 { /* u69 */
+			u69: ina226@46 { /* u69 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u69";
 				reg = <0x46>;
 				shunt-resistor = <2000>;
 			};
-			ina226@47 { /* u66 */
+			u66: ina226@47 { /* u66 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u66";
 				reg = <0x47>;
 				shunt-resistor = <5000>;
 			};
-			ina226@48 { /* u65 */
+			u65: ina226@48 { /* u65 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
 				reg = <0x48>;
 				shunt-resistor = <5000>;
 			};
-			ina226@49 { /* u63 */
+			u63: ina226@49 { /* u63 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
 				reg = <0x49>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4a { /* u3 */
+			u3: ina226@4a { /* u3 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u3";
 				reg = <0x4a>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4b { /* u71 */
+			u71: ina226@4b { /* u71 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u71";
 				reg = <0x4b>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4c { /* u77 */
+			u77: ina226@4c { /* u77 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
 				reg = <0x4c>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4d { /* u73 */
+			u73: ina226@4d { /* u73 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u73";
 				reg = <0x4d>;
 				shunt-resistor = <5000>;
 			};
-			ina226@4e { /* u79 */
+			u79: ina226@4e { /* u79 */
 				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
 				reg = <0x4e>;
 				shunt-resistor = <5000>;
 			};
@@ -304,6 +389,7 @@
 				temperature-stability = <50>;
 				factory-fout = <300000000>;
 				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
 			};
 		};
 		i2c@3 {
@@ -316,7 +402,8 @@
 				reg = <0x5d>;
 				temperature-stability = <50>;
 				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_mgt";
 			};
 		};
 		i2c@4 {
@@ -440,4 +527,5 @@
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	dr_mode = "host";
 };
diff --git a/dts/src/arm64/xilinx/zynqmp.dtsi b/dts/src/arm64/xilinx/zynqmp.dtsi
index 3c731e7390..26d926eb14 100644
--- a/dts/src/arm64/xilinx/zynqmp.dtsi
+++ b/dts/src/arm64/xilinx/zynqmp.dtsi
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP
  *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ * (C) Copyright 2014 - 2019, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  *
@@ -12,6 +12,8 @@
  * the License, or (at your option) any later version.
  */
 
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;
@@ -118,8 +120,31 @@
 	firmware {
 		zynqmp_firmware: zynqmp-firmware {
 			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
 			method = "smc";
 
+			zynqmp_power: zynqmp-power {
+				compatible = "xlnx,zynqmp-power";
+				interrupt-parent = <&gic>;
+				interrupts = <0 35 4>;
+			};
+
+			zynqmp_clk: clock-controller {
+				u-boot,dm-pre-reloc;
+				#clock-cells = <1>;
+				compatible = "xlnx,zynqmp-clk";
+				clocks = <&pss_ref_clk>,
+					 <&video_clk>,
+					 <&pss_alt_ref_clk>,
+					 <&aux_ref_clk>,
+					 <&gt_crx_ref_clk>;
+				clock-names = "pss_ref_clk",
+					      "video_clk",
+					      "pss_alt_ref_clk",
+					      "aux_ref_clk",
+					      "gt_crx_ref_clk";
+			};
+
 			nvmem_firmware {
 				compatible = "xlnx,zynqmp-nvmem-fw";
 				#address-cells = <1>;
@@ -187,6 +212,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_0>;
 		};
 
 		can1: can@ff070000 {
@@ -198,6 +224,7 @@
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_1>;
 		};
 
 		cci: cci@fd6e0000 {
@@ -228,6 +255,7 @@
 			interrupts = <0 124 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan2: dma@fd510000 {
@@ -238,6 +266,7 @@
 			interrupts = <0 125 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan3: dma@fd520000 {
@@ -248,6 +277,7 @@
 			interrupts = <0 126 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan4: dma@fd530000 {
@@ -258,6 +288,7 @@
 			interrupts = <0 127 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan5: dma@fd540000 {
@@ -268,6 +299,7 @@
 			interrupts = <0 128 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan6: dma@fd550000 {
@@ -278,6 +310,7 @@
 			interrupts = <0 129 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan7: dma@fd560000 {
@@ -288,6 +321,7 @@
 			interrupts = <0 130 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		fpd_dma_chan8: dma@fd570000 {
@@ -298,6 +332,7 @@
 			interrupts = <0 131 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <128>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
 		/* LPDDMA default allows only secured access. inorder to enable
@@ -312,6 +347,7 @@
 			interrupts = <0 77 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan2: dma@ffa90000 {
@@ -322,6 +358,7 @@
 			interrupts = <0 78 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan3: dma@ffaa0000 {
@@ -332,6 +369,7 @@
 			interrupts = <0 79 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan4: dma@ffab0000 {
@@ -342,6 +380,7 @@
 			interrupts = <0 80 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan5: dma@ffac0000 {
@@ -352,6 +391,7 @@
 			interrupts = <0 81 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan6: dma@ffad0000 {
@@ -362,6 +402,7 @@
 			interrupts = <0 82 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan7: dma@ffae0000 {
@@ -372,6 +413,7 @@
 			interrupts = <0 83 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		lpd_dma_chan8: dma@ffaf0000 {
@@ -382,6 +424,7 @@
 			interrupts = <0 84 4>;
 			clock-names = "clk_main", "clk_apb";
 			xlnx,bus-width = <64>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
 		mc: memory-controller@fd070000 {
@@ -400,6 +443,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_0>;
 		};
 
 		gem1: ethernet@ff0c0000 {
@@ -411,6 +455,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_1>;
 		};
 
 		gem2: ethernet@ff0d0000 {
@@ -422,6 +467,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_2>;
 		};
 
 		gem3: ethernet@ff0e0000 {
@@ -433,6 +479,7 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_ETH_3>;
 		};
 
 		gpio: gpio@ff0a0000 {
@@ -445,6 +492,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x0 0xff0a0000 0x0 0x1000>;
+			power-domains = <&zynqmp_firmware PD_GPIO>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -455,6 +503,7 @@
 			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_0>;
 		};
 
 		i2c1: i2c@ff030000 {
@@ -465,6 +514,7 @@
 			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_1>;
 		};
 
 		pcie: pcie@fd0e0000 {
@@ -496,6 +546,7 @@
 					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
 					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
 					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			power-domains = <&zynqmp_firmware PD_PCIE>;
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
@@ -519,24 +570,31 @@
 			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
+			power-domains = <&zynqmp_firmware PD_SATA>;
 		};
 
 		sdhci0: mmc@ff160000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
+			power-domains = <&zynqmp_firmware PD_SD_0>;
 		};
 
 		sdhci1: mmc@ff170000 {
-			compatible = "arasan,sdhci-8.9a";
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
+			power-domains = <&zynqmp_firmware PD_SD_1>;
 		};
 
 		smmu: smmu@fd800000 {
@@ -561,6 +619,7 @@
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_0>;
 		};
 
 		spi1: spi@ff050000 {
@@ -572,6 +631,7 @@
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_1>;
 		};
 
 		ttc0: timer@ff110000 {
@@ -581,6 +641,7 @@
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
 			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_0>;
 		};
 
 		ttc1: timer@ff120000 {
@@ -590,6 +651,7 @@
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
 			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_1>;
 		};
 
 		ttc2: timer@ff130000 {
@@ -599,6 +661,7 @@
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
 			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_2>;
 		};
 
 		ttc3: timer@ff140000 {
@@ -608,6 +671,7 @@
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
 			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_3>;
 		};
 
 		uart0: serial@ff000000 {
@@ -617,6 +681,7 @@
 			interrupts = <0 21 4>;
 			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_0>;
 		};
 
 		uart1: serial@ff010000 {
@@ -626,6 +691,7 @@
 			interrupts = <0 22 4>;
 			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_1>;
 		};
 
 		usb0: usb@fe200000 {
@@ -635,6 +701,7 @@
 			interrupts = <0 65 4>;
 			reg = <0x0 0xfe200000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
+			power-domains = <&zynqmp_firmware PD_USB_0>;
 		};
 
 		usb1: usb@fe300000 {
@@ -644,6 +711,7 @@
 			interrupts = <0 70 4>;
 			reg = <0x0 0xfe300000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
+			power-domains = <&zynqmp_firmware PD_USB_1>;
 		};
 
 		watchdog0: watchdog@fd4d0000 {
diff --git a/dts/src/mips/ingenic/cu1000-neo.dts b/dts/src/mips/ingenic/cu1000-neo.dts
new file mode 100644
index 0000000000..03abd94acd
--- /dev/null
+++ b/dts/src/mips/ingenic/cu1000-neo.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "yna,cu1000-neo", "ingenic,x1000";
+	model = "YSH & ATIL General Board CU Neo";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x04000000>;
+	};
+
+	wlan_pwrseq: msc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&lpoclk>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+
+		lpoclk: ap6212a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&exclk {
+	clock-frequency = <24000000>;
+};
+
+&tcu {
+	/* 1500 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <1500000>, <1500000>;
+
+	/* Use channel #0 for the system timer channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_i2c0>;
+
+	ads7830@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
+
+	status = "okay";
+};
+
+&mac {
+	phy-mode = "rmii";
+	phy-handle = <&lan8720a>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_mac>;
+
+	snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&msc0 {
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc0>;
+
+	non-removable;
+
+	status = "okay";
+};
+
+&msc1 {
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_msc1>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	status = "okay";
+
+	ap6212a: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpc>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		brcm,drive-strength = <10>;
+	};
+};
+
+&pinctrl {
+	pins_i2c0: i2c0 {
+		function = "i2c0";
+		groups = "i2c0-data";
+		bias-disable;
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data-d";
+		bias-disable;
+	};
+
+	pins_mac: mac {
+		function = "mac";
+		groups = "mac";
+		bias-disable;
+	};
+
+	pins_msc0: msc0 {
+		function = "mmc0";
+		groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
+		bias-disable;
+	};
+
+	pins_msc1: msc1 {
+		function = "mmc1";
+		groups = "mmc1-1bit", "mmc1-4bit";
+		bias-disable;
+	};
+};
diff --git a/dts/src/mips/ingenic/x1000.dtsi b/dts/src/mips/ingenic/x1000.dtsi
new file mode 100644
index 0000000000..4994c695a1
--- /dev/null
+++ b/dts/src/mips/ingenic/x1000.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,x1000", "ingenic,x1000e";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+		reg = <0x10001000 0x50>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	exclk: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	rtclk: rtc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: x1000-cgu@10000000 {
+		compatible = "ingenic,x1000-cgu";
+		reg = <0x10000000 0x100>;
+
+		#clock-cells = <1>;
+
+		clocks = <&exclk>, <&rtclk>;
+		clock-names = "ext", "rtc";
+	};
+
+	tcu: timer@10002000 {
+		compatible = "ingenic,x1000-tcu",
+				 "ingenic,jz4770-tcu",
+				 "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu X1000_CLK_RTCLK
+			  &cgu X1000_CLK_EXCLK
+			  &cgu X1000_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		wdt: watchdog@0 {
+			compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+			reg = <0x0 0x10>;
+
+			clocks = <&cgu X1000_CLK_RTCLK>;
+			clock-names = "wdt";
+		};
+	};
+
+	rtc: rtc@10003000 {
+		compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+		reg = <0x10003000 0x4c>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <32>;
+
+		clocks = <&cgu X1000_CLK_RTCLK>;
+		clock-names = "rtc";
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,x1000-pinctrl";
+		reg = <0x10010000 0x800>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,x1000-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+	};
+
+	i2c0: i2c-controller@10050000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10050000 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <60>;
+
+		clocks = <&cgu X1000_CLK_I2C0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c-controller@10051000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10051000 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <59>;
+
+		clocks = <&cgu X1000_CLK_I2C1>;
+
+		status = "disabled";
+	};
+
+	i2c2: i2c-controller@10052000 {
+		compatible = "ingenic,x1000-i2c";
+		reg = <0x10052000 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <58>;
+
+		clocks = <&cgu X1000_CLK_I2C2>;
+
+		status = "disabled";
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10030000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <51>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10031000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <50>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,x1000-uart";
+		reg = <0x10032000 0x100>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <49>;
+
+		clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		status = "disabled";
+	};
+
+	pdma: dma-controller@13420000 {
+		compatible = "ingenic,x1000-dma";
+		reg = <0x13420000 0x400
+			   0x13421000 0x40>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <10>;
+
+		clocks = <&cgu X1000_CLK_PDMA>;
+	};
+
+	mac: ethernet@134b0000 {
+		compatible = "ingenic,x1000-mac", "snps,dwmac";
+		reg = <0x134b0000 0x2000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <55>;
+		interrupt-names = "macirq";
+
+		clocks = <&cgu X1000_CLK_MAC>;
+		clock-names = "stmmaceth";
+
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	msc0: mmc@13450000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13450000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <37>;
+
+		clocks = <&cgu X1000_CLK_MSC0>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+
+	msc1: mmc@13460000 {
+		compatible = "ingenic,x1000-mmc";
+		reg = <0x13460000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <36>;
+
+		clocks = <&cgu X1000_CLK_MSC1>;
+		clock-names = "mmc";
+
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		cap-sdio-irq;
+
+		dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+			   <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+		dma-names = "rx", "tx";
+
+		status = "disabled";
+	};
+};
diff --git a/dts/src/mips/qca/ar9331.dtsi b/dts/src/mips/qca/ar9331.dtsi
index 5cfc9d3478..8f5aed760a 100644
--- a/dts/src/mips/qca/ar9331.dtsi
+++ b/dts/src/mips/qca/ar9331.dtsi
@@ -126,6 +126,9 @@
 			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
 			clock-names = "eth", "mdio";
 
+			phy-mode = "mii";
+			phy-handle = <&phy_port4>;
+
 			status = "disabled";
 		};
 
@@ -133,13 +136,127 @@
 			compatible = "qca,ar9330-eth";
 			reg = <0x1a000000 0x200>;
 			interrupts = <5>;
-
 			resets = <&rst 13>, <&rst 23>;
 			reset-names = "mac", "mdio";
 			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
 			clock-names = "eth", "mdio";
 
+			phy-mode = "gmii";
+
 			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch10: switch@10 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compatible = "qca,ar9331-switch";
+					reg = <0x10>;
+					resets = <&rst 8>;
+					reset-names = "switch";
+
+					interrupt-parent = <&miscintc>;
+					interrupts = <12>;
+
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						switch_port0: port@0 {
+							reg = <0x0>;
+							label = "cpu";
+							ethernet = <&eth1>;
+
+							phy-mode = "gmii";
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						switch_port1: port@1 {
+							reg = <0x1>;
+							phy-handle = <&phy_port0>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port2: port@2 {
+							reg = <0x2>;
+							phy-handle = <&phy_port1>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port3: port@3 {
+							reg = <0x3>;
+							phy-handle = <&phy_port2>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port4: port@4 {
+							reg = <0x4>;
+							phy-handle = <&phy_port3>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+					};
+
+					mdio {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						interrupt-parent = <&switch10>;
+
+						phy_port0: phy@0 {
+							reg = <0x0>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port1: phy@1 {
+							reg = <0x1>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port2: phy@2 {
+							reg = <0x2>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port3: phy@3 {
+							reg = <0x3>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port4: phy@4 {
+							reg = <0x4>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+					};
+				};
+			};
 		};
 
 		usb: usb@1b000100 {
diff --git a/dts/src/mips/qca/ar9331_dpt_module.dts b/dts/src/mips/qca/ar9331_dpt_module.dts
index 77bab823eb..0f2b200448 100644
--- a/dts/src/mips/qca/ar9331_dpt_module.dts
+++ b/dts/src/mips/qca/ar9331_dpt_module.dts
@@ -84,3 +84,16 @@
 &eth1 {
 	status = "okay";
 };
+
+&switch_port1 {
+	label = "lan0";
+	status = "okay";
+};
+
+&phy_port0 {
+	status = "okay";
+};
+
+&phy_port4 {
+	status = "okay";
+};
diff --git a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts
index aa5caaa311..6069b33cf0 100644
--- a/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts
+++ b/dts/src/mips/ralink/gardena_smart_gateway_mt7688.dts
@@ -177,6 +177,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinmux_i2s_gpio>;		/* GPIO0..3 */
 
+	fifo-size = <8>;
+	tx-threshold = <8>;
+
 	rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 	cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 };
@@ -195,3 +198,8 @@
 &watchdog {
 	status = "okay";
 };
+
+&wmac {
+	status = "okay";
+	mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/dts/src/mips/ralink/mt7628a.dtsi b/dts/src/mips/ralink/mt7628a.dtsi
index 742bcc1dc2..892e8ab863 100644
--- a/dts/src/mips/ralink/mt7628a.dtsi
+++ b/dts/src/mips/ralink/mt7628a.dtsi
@@ -285,4 +285,14 @@
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
 	};
+
+	wmac: wmac@10300000 {
+		compatible = "mediatek,mt7628-wmac";
+		reg = <0x10300000 0x100000>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		status = "disabled";
+	};
 };
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
index e1a961f05d..baa0c503e7 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -63,6 +63,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy0: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
index c288f3c6c6..93095600e8 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -60,6 +60,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy6: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
index 94f3e71750..ff4bd38f06 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -63,6 +63,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy1: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
index 94a76982d2..1fa38ed6f5 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -60,6 +60,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy7: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
index b5ff5f71c6..a8cc9780c0 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy0: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
index ee44182c63..8b8bd70c93 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy1: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
index f05f0d7750..619c880b54 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe5000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy2: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
index a9114ec510..d7ebb73a40 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe7000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy3: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
index 44dd00ac73..b151d696a0 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe9000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy4: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
index 5b1b84b586..adc0ae0013 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -59,6 +59,7 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xeb000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy5: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
index 0e1daaef9e..435047e0e2 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -60,6 +60,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy14: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
index 68c5ef7792..c098657cca 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -60,6 +60,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy15: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
index 605363cc11..9d06824815 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy8: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
index 1955dfa136..70e947730c 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy9: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
index 2c1476454e..ad96e65295 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe5000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy10: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
index b8b541ff5f..034bc4b71f 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe7000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy11: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
index 4b2cfddd1b..93ca23d82b 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe9000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy12: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
index 0a52ddf7cc..23b3117a2f 100644
--- a/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/dts/src/powerpc/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -59,6 +59,7 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xeb000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
 
 		pcsphy13: ethernet-phy@0 {
 			reg = <0x0>;
diff --git a/dts/src/powerpc/mgcoge.dts b/dts/src/powerpc/mgcoge.dts
index a2dd5f1da6..7de068991b 100644
--- a/dts/src/powerpc/mgcoge.dts
+++ b/dts/src/powerpc/mgcoge.dts
@@ -224,7 +224,7 @@
 				reg = <0x11a80 0x40 0x89fc 0x2>;
 				interrupts = <2 8>;
 				interrupt-parent = <&PIC>;
-				gpios = < &cpm2_pio_d 19 0>;
+				cs-gpios = < &cpm2_pio_d 19 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				ds3106@1 {
diff --git a/dts/src/powerpc/mpc832x_rdb.dts b/dts/src/powerpc/mpc832x_rdb.dts
index b625718652..ecebc27a28 100644
--- a/dts/src/powerpc/mpc832x_rdb.dts
+++ b/dts/src/powerpc/mpc832x_rdb.dts
@@ -249,7 +249,7 @@
 			reg = <0x4c0 0x40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
-			gpios = <&qe_pio_d 13 0>;
+			cs-gpios = <&qe_pio_d 13 0>;
 			mode = "cpu-qe";
 
 			mmc-slot@0 {
diff --git a/dts/src/powerpc/mpc8610_hpcd.dts b/dts/src/powerpc/mpc8610_hpcd.dts
index 1a8321ac10..33bbe58c1a 100644
--- a/dts/src/powerpc/mpc8610_hpcd.dts
+++ b/dts/src/powerpc/mpc8610_hpcd.dts
@@ -200,7 +200,7 @@
 			interrupts = <59 2>;
 			interrupt-parent = <&mpic>;
 			mode = "cpu";
-			gpios = <&sdcsr_pio 7 0>;
+			cs-gpios = <&sdcsr_pio 7 0>;
 			sleep = <&pmc 0x00000800 0>;
 
 			mmc-slot@0 {
diff --git a/dts/src/riscv/sifive/fu540-c000.dtsi b/dts/src/riscv/sifive/fu540-c000.dtsi
index a2e3d54e83..7db8610534 100644
--- a/dts/src/riscv/sifive/fu540-c000.dtsi
+++ b/dts/src/riscv/sifive/fu540-c000.dtsi
@@ -268,6 +268,19 @@
 			interrupts = <1 2 3>;
 			reg = <0x0 0x2010000 0x0 0x1000>;
 		};
-
+		gpio: gpio@10060000 {
+			compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
+			interrupt-parent = <&plic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>,
+				     <14>, <15>, <16>, <17>, <18>, <19>, <20>,
+				     <21>, <22>;
+			reg = <0x0 0x10060000 0x0 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&prci PRCI_CLK_TLCLK>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/dts/src/riscv/sifive/hifive-unleashed-a00.dts b/dts/src/riscv/sifive/hifive-unleashed-a00.dts
index 88cfcb96bf..609198cb11 100644
--- a/dts/src/riscv/sifive/hifive-unleashed-a00.dts
+++ b/dts/src/riscv/sifive/hifive-unleashed-a00.dts
@@ -94,3 +94,7 @@
 &pwm1 {
 	status = "okay";
 };
+
+&gpio {
+	status = "okay";
+};
diff --git a/fs/Kconfig b/fs/Kconfig
index adf281a5b8..e0405de334 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -71,6 +71,7 @@ config FS_EFIVARFS
 	  This filesystem driver provides access to EFI variables.
 
 source "fs/fat/Kconfig"
+source "fs/jffs2/Kconfig"
 source "fs/ubifs/Kconfig"
 
 config FS_BPKFS
diff --git a/fs/Makefile b/fs/Makefile
index 9889a6507c..f13dc97c32 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_FS_LEGACY) += legacy.o
 obj-$(CONFIG_FS_DEVFS)	+= devfs.o
 obj-$(CONFIG_FS_FAT)	+= fat/
 obj-y	+= fs.o libfs.o
+obj-$(CONFIG_FS_JFFS2)	+= jffs2/
 obj-$(CONFIG_FS_UBIFS)	+= ubifs/
 obj-$(CONFIG_FS_TFTP)	+= tftp.o
 obj-$(CONFIG_FS_OMAP4_USBBOOT)	+= omap4_usbbootfs.o
diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig
new file mode 100644
index 0000000000..3121d369b4
--- /dev/null
+++ b/fs/jffs2/Kconfig
@@ -0,0 +1,47 @@
+menuconfig FS_JFFS2
+	bool
+	select CRC32
+	depends on MTD
+	prompt "jffs2 support"
+
+if FS_JFFS2
+
+config FS_JFFS2_FS_DEBUG
+	int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+	default "0"
+
+config FS_JFFS2_COMPRESSION_OPTIONS
+	bool "Advanced compression options for JFFS2"
+	depends on FS_JFFS2
+	help
+	  Enabling this option allows you to explicitly choose which
+	  compression modules, if any, are enabled in JFFS2. Removing
+	  compressors can mean you cannot read existing file systems,
+	  and enabling experimental compressors can mean that you
+	  write a file system which cannot be read by a standard kernel.
+
+	  If unsure, you should _definitely_ say 'N'.
+
+if FS_JFFS2_COMPRESSION_OPTIONS
+
+config FS_JFFS2_COMPRESSION_ZLIB
+	bool
+	select ZLIB
+	prompt "ZLIB compression support"
+
+config FS_JFFS2_COMPRESSION_LZO
+	bool
+	select LZO_DECOMPRESS
+	prompt "LZO compression support"
+
+config FS_JFFS2_COMPRESSION_RTIME
+	bool
+	prompt "RTIME compression support"
+
+config FS_JFFS2_COMPRESSION_RUBIN
+	bool
+	prompt "Rubin compression support"
+
+endif
+
+endif
diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile
new file mode 100644
index 0000000000..a4da48d3c3
--- /dev/null
+++ b/fs/jffs2/Makefile
@@ -0,0 +1,9 @@
+obj-y += compr.o dir.o nodelist.o malloc.o
+obj-y += read.o readinode.o scan.o
+obj-y += build.o fs.o
+obj-y += super.o debug.o
+
+obj-$(CONFIG_FS_JFFS2_COMPRESSION_ZLIB) += compr_zlib.o
+obj-$(CONFIG_FS_JFFS2_COMPRESSION_LZO) += compr_lzo.o
+obj-$(CONFIG_FS_JFFS2_COMPRESSION_RTIME) += compr_rtime.o
+obj-$(CONFIG_FS_JFFS2_COMPRESSION_RUBIN) += compr_rubin.o
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
new file mode 100644
index 0000000000..12d0271bdd
--- /dev/null
+++ b/fs/jffs2/acl.h
@@ -0,0 +1,42 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2006  NEC Corporation
+ *
+ * Created by KaiGai Kohei <kaigai@ak.jp.nec.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+struct jffs2_acl_entry {
+	jint16_t	e_tag;
+	jint16_t	e_perm;
+	jint32_t	e_id;
+};
+
+struct jffs2_acl_entry_short {
+	jint16_t	e_tag;
+	jint16_t	e_perm;
+};
+
+struct jffs2_acl_header {
+	jint32_t	a_version;
+	struct jffs2_acl_entry	a_entries[];
+};
+
+#ifdef CONFIG_JFFS2_FS_POSIX_ACL
+
+struct posix_acl *jffs2_get_acl(struct inode *inode, int type);
+int jffs2_set_acl(struct inode *inode, struct posix_acl *acl, int type);
+extern int jffs2_init_acl_pre(struct inode *, struct inode *, umode_t *);
+extern int jffs2_init_acl_post(struct inode *);
+
+#else
+
+#define jffs2_get_acl				(NULL)
+#define jffs2_set_acl				(NULL)
+#define jffs2_init_acl_pre(dir_i,inode,mode)	(0)
+#define jffs2_init_acl_post(inode)		(0)
+
+#endif	/* CONFIG_JFFS2_FS_POSIX_ACL */
diff --git a/fs/jffs2/build.c b/fs/jffs2/build.c
new file mode 100644
index 0000000000..f3fc0ade20
--- /dev/null
+++ b/fs/jffs2/build.c
@@ -0,0 +1,425 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mtd/mtd.h>
+#include "nodelist.h"
+
+static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *,
+		struct jffs2_inode_cache *, struct jffs2_full_dirent **);
+
+static inline struct jffs2_inode_cache *
+first_inode_chain(int *i, struct jffs2_sb_info *c)
+{
+	for (; *i < c->inocache_hashsize; (*i)++) {
+		if (c->inocache_list[*i])
+			return c->inocache_list[*i];
+	}
+	return NULL;
+}
+
+static inline struct jffs2_inode_cache *
+next_inode(int *i, struct jffs2_inode_cache *ic, struct jffs2_sb_info *c)
+{
+	/* More in this chain? */
+	if (ic->next)
+		return ic->next;
+	(*i)++;
+	return first_inode_chain(i, c);
+}
+
+#define for_each_inode(i, c, ic)			\
+	for (i = 0, ic = first_inode_chain(&i, (c));	\
+	     ic;					\
+	     ic = next_inode(&i, ic, (c)))
+
+
+static void jffs2_build_inode_pass1(struct jffs2_sb_info *c,
+				    struct jffs2_inode_cache *ic,
+				    int *dir_hardlinks)
+{
+	struct jffs2_full_dirent *fd;
+
+	dbg_fsbuild("building directory inode #%u\n", ic->ino);
+
+	/* For each child, increase nlink */
+	for(fd = ic->scan_dents; fd; fd = fd->next) {
+		struct jffs2_inode_cache *child_ic;
+		if (!fd->ino)
+			continue;
+
+		/* we can get high latency here with huge directories */
+
+		child_ic = jffs2_get_ino_cache(c, fd->ino);
+		if (!child_ic) {
+			dbg_fsbuild("child \"%s\" (ino #%u) of dir ino #%u doesn't exist!\n",
+				  fd->name, fd->ino, ic->ino);
+			jffs2_mark_node_obsolete(c, fd->raw);
+			/* Clear the ic/raw union so it doesn't cause problems later. */
+			fd->ic = NULL;
+			continue;
+		}
+
+		/* From this point, fd->raw is no longer used so we can set fd->ic */
+		fd->ic = child_ic;
+		child_ic->pino_nlink++;
+		/* If we appear (at this stage) to have hard-linked directories,
+		 * set a flag to trigger a scan later */
+		if (fd->type == DT_DIR) {
+			child_ic->flags |= INO_FLAGS_IS_DIR;
+			if (child_ic->pino_nlink > 1)
+				*dir_hardlinks = 1;
+		}
+
+		dbg_fsbuild("increased nlink for child \"%s\" (ino #%u)\n", fd->name, fd->ino);
+		/* Can't free scan_dents so far. We might need them in pass 2 */
+	}
+}
+
+/* Scan plan:
+ - Scan physical nodes. Build map of inodes/dirents. Allocate inocaches as we go
+ - Scan directory tree from top down, setting nlink in inocaches
+ - Scan inocaches for inodes with nlink==0
+*/
+static int jffs2_build_filesystem(struct jffs2_sb_info *c)
+{
+	int ret, i, dir_hardlinks = 0;
+	struct jffs2_inode_cache *ic;
+	struct jffs2_full_dirent *fd;
+	struct jffs2_full_dirent *dead_fds = NULL;
+
+	dbg_fsbuild("build FS data structures\n");
+
+	/* First, scan the medium and build all the inode caches with
+	   lists of physical nodes */
+
+	c->flags |= JFFS2_SB_FLAG_SCANNING;
+	ret = jffs2_scan_medium(c);
+	c->flags &= ~JFFS2_SB_FLAG_SCANNING;
+	if (ret)
+		goto exit;
+
+	dbg_fsbuild("scanned flash completely\n");
+	jffs2_dbg_dump_block_lists_nolock(c);
+
+	dbg_fsbuild("pass 1 starting\n");
+	c->flags |= JFFS2_SB_FLAG_BUILDING;
+	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+	for_each_inode(i, c, ic) {
+		if (ic->scan_dents) {
+			jffs2_build_inode_pass1(c, ic, &dir_hardlinks);
+			cond_resched();
+		}
+	}
+
+	dbg_fsbuild("pass 1 complete\n");
+
+	/* Next, scan for inodes with nlink == 0 and remove them. If
+	   they were directories, then decrement the nlink of their
+	   children too, and repeat the scan. As that's going to be
+	   a fairly uncommon occurrence, it's not so evil to do it this
+	   way. Recursion bad. */
+	dbg_fsbuild("pass 2 starting\n");
+
+	for_each_inode(i, c, ic) {
+		if (ic->pino_nlink)
+			continue;
+
+		jffs2_build_remove_unlinked_inode(c, ic, &dead_fds);
+		cond_resched();
+	}
+
+	dbg_fsbuild("pass 2a starting\n");
+
+	while (dead_fds) {
+		fd = dead_fds;
+		dead_fds = fd->next;
+
+		ic = jffs2_get_ino_cache(c, fd->ino);
+
+		if (ic)
+			jffs2_build_remove_unlinked_inode(c, ic, &dead_fds);
+		jffs2_free_full_dirent(fd);
+	}
+
+	dbg_fsbuild("pass 2a complete\n");
+
+	if (dir_hardlinks) {
+		/* If we detected directory hardlinks earlier, *hopefully*
+		 * they are gone now because some of the links were from
+		 * dead directories which still had some old dirents lying
+		 * around and not yet garbage-collected, but which have
+		 * been discarded above. So clear the pino_nlink field
+		 * in each directory, so that the final scan below can
+		 * print appropriate warnings. */
+		for_each_inode(i, c, ic) {
+			if (ic->flags & INO_FLAGS_IS_DIR)
+				ic->pino_nlink = 0;
+		}
+	}
+	dbg_fsbuild("freeing temporary data structures\n");
+
+	/* Finally, we can scan again and free the dirent structs */
+	for_each_inode(i, c, ic) {
+		while(ic->scan_dents) {
+			fd = ic->scan_dents;
+			ic->scan_dents = fd->next;
+			/* We do use the pino_nlink field to count nlink of
+			 * directories during fs build, so set it to the
+			 * parent ino# now. Now that there's hopefully only
+			 * one. */
+			if (fd->type == DT_DIR) {
+				if (!fd->ic) {
+					/* We'll have complained about it and marked the coresponding
+					   raw node obsolete already. Just skip it. */
+					continue;
+				}
+
+				/* We *have* to have set this in jffs2_build_inode_pass1() */
+				BUG_ON(!(fd->ic->flags & INO_FLAGS_IS_DIR));
+
+				/* We clear ic->pino_nlink ∀ directories' ic *only* if dir_hardlinks
+				 * is set. Otherwise, we know this should never trigger anyway, so
+				 * we don't do the check. And ic->pino_nlink still contains the nlink
+				 * value (which is 1). */
+				if (dir_hardlinks && fd->ic->pino_nlink) {
+					JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u is also hard linked from dir ino #%u\n",
+						    fd->name, fd->ino, ic->ino, fd->ic->pino_nlink);
+					/* Should we unlink it from its previous parent? */
+				}
+
+				/* For directories, ic->pino_nlink holds that parent inode # */
+				fd->ic->pino_nlink = ic->ino;
+			}
+			jffs2_free_full_dirent(fd);
+		}
+		ic->scan_dents = NULL;
+		cond_resched();
+	}
+	jffs2_build_xattr_subsystem(c);
+	c->flags &= ~JFFS2_SB_FLAG_BUILDING;
+
+	dbg_fsbuild("FS build complete\n");
+
+	/* Rotate the lists by some number to ensure wear levelling */
+	jffs2_rotate_lists(c);
+
+	ret = 0;
+
+exit:
+	if (ret) {
+		for_each_inode(i, c, ic) {
+			while(ic->scan_dents) {
+				fd = ic->scan_dents;
+				ic->scan_dents = fd->next;
+				jffs2_free_full_dirent(fd);
+			}
+		}
+		jffs2_clear_xattr_subsystem(c);
+	}
+
+	return ret;
+}
+
+static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *c,
+					struct jffs2_inode_cache *ic,
+					struct jffs2_full_dirent **dead_fds)
+{
+	struct jffs2_raw_node_ref *raw;
+	struct jffs2_full_dirent *fd;
+
+	dbg_fsbuild("removing ino #%u with nlink == zero.\n", ic->ino);
+
+	raw = ic->nodes;
+	while (raw != (void *)ic) {
+		struct jffs2_raw_node_ref *next = raw->next_in_ino;
+		dbg_fsbuild("obsoleting node at 0x%08x\n", ref_offset(raw));
+		jffs2_mark_node_obsolete(c, raw);
+		raw = next;
+	}
+
+	if (ic->scan_dents) {
+		int whinged = 0;
+		dbg_fsbuild("inode #%u was a directory which may have children...\n", ic->ino);
+
+		while(ic->scan_dents) {
+			struct jffs2_inode_cache *child_ic;
+
+			fd = ic->scan_dents;
+			ic->scan_dents = fd->next;
+
+			if (!fd->ino) {
+				/* It's a deletion dirent. Ignore it */
+				dbg_fsbuild("child \"%s\" is a deletion dirent, skipping...\n", fd->name);
+				jffs2_free_full_dirent(fd);
+				continue;
+			}
+			if (!whinged)
+				whinged = 1;
+
+			dbg_fsbuild("removing child \"%s\", ino #%u\n", fd->name, fd->ino);
+
+			child_ic = jffs2_get_ino_cache(c, fd->ino);
+			if (!child_ic) {
+				dbg_fsbuild("cannot remove child \"%s\", ino #%u, because it doesn't exist\n",
+						fd->name, fd->ino);
+				jffs2_free_full_dirent(fd);
+				continue;
+			}
+
+			/* Reduce nlink of the child. If it's now zero, stick it on the
+			   dead_fds list to be cleaned up later. Else just free the fd */
+			child_ic->pino_nlink--;
+
+			if (!child_ic->pino_nlink) {
+				dbg_fsbuild("inode #%u (\"%s\") now has no links; adding to dead_fds list.\n",
+					  fd->ino, fd->name);
+				fd->next = *dead_fds;
+				*dead_fds = fd;
+			} else {
+				dbg_fsbuild("inode #%u (\"%s\") has now got nlink %d. Ignoring.\n",
+					  fd->ino, fd->name, child_ic->pino_nlink);
+				jffs2_free_full_dirent(fd);
+			}
+		}
+	}
+
+	/*
+	   We don't delete the inocache from the hash list and free it yet.
+	   The erase code will do that, when all the nodes are completely gone.
+	*/
+}
+
+static void jffs2_calc_trigger_levels(struct jffs2_sb_info *c)
+{
+	uint32_t size;
+
+	/* Deletion should almost _always_ be allowed. We're fairly
+	   buggered once we stop allowing people to delete stuff
+	   because there's not enough free space... */
+	c->resv_blocks_deletion = 2;
+
+	/* Be conservative about how much space we need before we allow writes.
+	   On top of that which is required for deletia, require an extra 2%
+	   of the medium to be available, for overhead caused by nodes being
+	   split across blocks, etc. */
+
+	size = c->flash_size / 50; /* 2% of flash size */
+	size += c->nr_blocks * 100; /* And 100 bytes per eraseblock */
+	size += c->sector_size - 1; /* ... and round up */
+
+	c->resv_blocks_write = c->resv_blocks_deletion + (size / c->sector_size);
+
+	/* When do we let the GC thread run in the background */
+
+	c->resv_blocks_gctrigger = c->resv_blocks_write + 1;
+
+	/* When do we allow garbage collection to merge nodes to make
+	   long-term progress at the expense of short-term space exhaustion? */
+	c->resv_blocks_gcmerge = c->resv_blocks_deletion + 1;
+
+	/* When do we allow garbage collection to eat from bad blocks rather
+	   than actually making progress? */
+	c->resv_blocks_gcbad = 0;//c->resv_blocks_deletion + 2;
+
+	/* What number of 'very dirty' eraseblocks do we allow before we
+	   trigger the GC thread even if we don't _need_ the space. When we
+	   can't mark nodes obsolete on the medium, the old dirty nodes cause
+	   performance problems because we have to inspect and discard them. */
+	c->vdirty_blocks_gctrigger = c->resv_blocks_gctrigger;
+	if (jffs2_can_mark_obsolete(c))
+		c->vdirty_blocks_gctrigger *= 10;
+
+	/* If there's less than this amount of dirty space, don't bother
+	   trying to GC to make more space. It'll be a fruitless task */
+	c->nospc_dirty_size = c->sector_size + (c->flash_size / 100);
+
+	dbg_fsbuild("trigger levels (size %d KiB, block size %d KiB, %d blocks)\n",
+		    c->flash_size / 1024, c->sector_size / 1024, c->nr_blocks);
+	dbg_fsbuild("Blocks required to allow deletion:    %d (%d KiB)\n",
+		  c->resv_blocks_deletion, c->resv_blocks_deletion*c->sector_size/1024);
+	dbg_fsbuild("Blocks required to allow writes:      %d (%d KiB)\n",
+		  c->resv_blocks_write, c->resv_blocks_write*c->sector_size/1024);
+	dbg_fsbuild("Blocks required to quiesce GC thread: %d (%d KiB)\n",
+		  c->resv_blocks_gctrigger, c->resv_blocks_gctrigger*c->sector_size/1024);
+	dbg_fsbuild("Blocks required to allow GC merges:   %d (%d KiB)\n",
+		  c->resv_blocks_gcmerge, c->resv_blocks_gcmerge*c->sector_size/1024);
+	dbg_fsbuild("Blocks required to GC bad blocks:     %d (%d KiB)\n",
+		  c->resv_blocks_gcbad, c->resv_blocks_gcbad*c->sector_size/1024);
+	dbg_fsbuild("Amount of dirty space required to GC: %d bytes\n",
+		  c->nospc_dirty_size);
+	dbg_fsbuild("Very dirty blocks before GC triggered: %d\n",
+		  c->vdirty_blocks_gctrigger);
+}
+
+int jffs2_do_mount_fs(struct jffs2_sb_info *c)
+{
+	int ret;
+	int i;
+	int size;
+
+	c->free_size = c->flash_size;
+	c->nr_blocks = c->flash_size / c->sector_size;
+	size = sizeof(struct jffs2_eraseblock) * c->nr_blocks;
+#ifndef __ECOS
+	if (jffs2_blocks_use_vmalloc(c))
+		c->blocks = vzalloc(size);
+	else
+#endif
+		c->blocks = kzalloc(size, GFP_KERNEL);
+	if (!c->blocks)
+		return -ENOMEM;
+
+	for (i=0; i<c->nr_blocks; i++) {
+		INIT_LIST_HEAD(&c->blocks[i].list);
+		c->blocks[i].offset = i * c->sector_size;
+		c->blocks[i].free_size = c->sector_size;
+	}
+
+	INIT_LIST_HEAD(&c->clean_list);
+	INIT_LIST_HEAD(&c->very_dirty_list);
+	INIT_LIST_HEAD(&c->dirty_list);
+	INIT_LIST_HEAD(&c->erasable_list);
+	INIT_LIST_HEAD(&c->erasing_list);
+	INIT_LIST_HEAD(&c->erase_checking_list);
+	INIT_LIST_HEAD(&c->erase_pending_list);
+	INIT_LIST_HEAD(&c->erasable_pending_wbuf_list);
+	INIT_LIST_HEAD(&c->erase_complete_list);
+	INIT_LIST_HEAD(&c->free_list);
+	INIT_LIST_HEAD(&c->bad_list);
+	INIT_LIST_HEAD(&c->bad_used_list);
+	c->highest_ino = 1;
+	c->summary = NULL;
+
+	ret = jffs2_sum_init(c);
+	if (ret)
+		goto out_free;
+
+	if (jffs2_build_filesystem(c)) {
+		dbg_fsbuild("build_fs failed\n");
+		jffs2_free_ino_caches(c);
+		jffs2_free_raw_node_refs(c);
+		ret = -EIO;
+		goto out_free;
+	}
+
+	jffs2_calc_trigger_levels(c);
+
+	return 0;
+
+ out_free:
+	kfree(c->blocks);
+	return ret;
+}
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
new file mode 100644
index 0000000000..1c5a7d9137
--- /dev/null
+++ b/fs/jffs2/compr.c
@@ -0,0 +1,155 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2004 Ferenc Havasi <havasi@inf.u-szeged.hu>,
+ *		    University of Szeged, Hungary
+ *
+ * Created by Arjan van de Ven <arjan@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include "compr.h"
+
+/* Available compressors are on this list */
+static LIST_HEAD(jffs2_compressor_list);
+
+/* Statistics for blocks stored without compression */
+static uint32_t none_stat_decompr_blocks=0;
+
+/*
+ * Return 1 to use this compression
+ */
+int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+		     uint16_t comprtype, unsigned char *cdata_in,
+		     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen)
+{
+	struct jffs2_compressor *this;
+	int ret;
+
+	/* Older code had a bug where it would write non-zero 'usercompr'
+	   fields. Deal with it. */
+	if ((comprtype & 0xff) <= JFFS2_COMPR_ZLIB)
+		comprtype &= 0xff;
+
+	switch (comprtype & 0xff) {
+	case JFFS2_COMPR_NONE:
+		/* This should be special-cased elsewhere, but we might as well deal with it */
+		memcpy(data_out, cdata_in, datalen);
+		none_stat_decompr_blocks++;
+		break;
+	case JFFS2_COMPR_ZERO:
+		memset(data_out, 0, datalen);
+		break;
+	default:
+		list_for_each_entry(this, &jffs2_compressor_list, list) {
+			if (comprtype == this->compr) {
+				this->usecount++;
+				ret = this->decompress(cdata_in, data_out, cdatalen, datalen);
+				if (ret) {
+					pr_warn("Decompressor \"%s\" returned %d\n",
+						this->name, ret);
+				}
+				else {
+					this->stat_decompr_blocks++;
+				}
+				this->usecount--;
+				return ret;
+			}
+		}
+		pr_warn("compression type 0x%02x not available\n", comprtype);
+		return -EIO;
+	}
+	return 0;
+}
+
+int jffs2_register_compressor(struct jffs2_compressor *comp)
+{
+	struct jffs2_compressor *this;
+
+	if (!comp->name) {
+		pr_warn("NULL compressor name at registering JFFS2 compressor. Failed.\n");
+		return -1;
+	}
+	comp->compr_buf_size=0;
+	comp->compr_buf=NULL;
+	comp->usecount=0;
+	comp->stat_compr_orig_size=0;
+	comp->stat_compr_new_size=0;
+	comp->stat_compr_blocks=0;
+	comp->stat_decompr_blocks=0;
+	jffs2_dbg(1, "Registering JFFS2 compressor \"%s\"\n", comp->name);
+
+	list_for_each_entry(this, &jffs2_compressor_list, list) {
+		if (this->priority < comp->priority) {
+			list_add(&comp->list, this->list.prev);
+			goto out;
+		}
+	}
+	list_add_tail(&comp->list, &jffs2_compressor_list);
+out:
+	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+	})
+
+
+	return 0;
+}
+
+int jffs2_unregister_compressor(struct jffs2_compressor *comp)
+{
+	D2(struct jffs2_compressor *this);
+
+	jffs2_dbg(1, "Unregistering JFFS2 compressor \"%s\"\n", comp->name);
+
+	if (comp->usecount) {
+		pr_warn("Compressor module is in use. Unregister failed.\n");
+		return -1;
+	}
+	list_del(&comp->list);
+
+	D2(list_for_each_entry(this, &jffs2_compressor_list, list) {
+		printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
+	})
+	return 0;
+}
+
+int __init jffs2_compressors_init(void)
+{
+/* Registering compressors */
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_ZLIB
+	jffs2_zlib_init();
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_LZO
+	jffs2_lzo_init();
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RTIME
+	jffs2_rtime_init();
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RUBIN
+	jffs2_dynrubin_init();
+#endif
+/* Setting default compression mode */
+	return 0;
+}
+
+int jffs2_compressors_exit(void)
+{
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_ZLIB
+	jffs2_zlib_exit();
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_LZO
+	jffs2_lzo_exit();
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RTIME
+	jffs2_rtime_exit();
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RUBIN
+	jffs2_dynrubin_exit();
+#endif
+	return 0;
+}
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
new file mode 100644
index 0000000000..2e3c368ace
--- /dev/null
+++ b/fs/jffs2/compr.h
@@ -0,0 +1,112 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2004   Ferenc Havasi <havasi@inf.u-szeged.hu>,
+ *		      University of Szeged, Hungary
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef __JFFS2_COMPR_H__
+#define __JFFS2_COMPR_H__
+
+#include <errno.h>
+#include <fs.h>
+#include <linux/jffs2.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <malloc.h>
+#include "jffs2_fs_i.h"
+#include "jffs2_fs_sb.h"
+#include "nodelist.h"
+
+#define JFFS2_RUBINMIPS_PRIORITY 10
+#define JFFS2_DYNRUBIN_PRIORITY  20
+#define JFFS2_LZARI_PRIORITY     30
+#define JFFS2_RTIME_PRIORITY     50
+#define JFFS2_ZLIB_PRIORITY      60
+#define JFFS2_LZO_PRIORITY       80
+
+
+#define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+#define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
+
+#define JFFS2_COMPR_MODE_NONE       0
+#define JFFS2_COMPR_MODE_PRIORITY   1
+#define JFFS2_COMPR_MODE_SIZE       2
+#define JFFS2_COMPR_MODE_FAVOURLZO  3
+#define JFFS2_COMPR_MODE_FORCELZO   4
+#define JFFS2_COMPR_MODE_FORCEZLIB  5
+
+#define FAVOUR_LZO_PERCENT 80
+
+struct jffs2_compressor {
+	struct list_head list;
+	int priority;			/* used by prirority comr. mode */
+	char *name;
+	char compr;			/* JFFS2_COMPR_XXX */
+	int (*compress)(unsigned char *data_in, unsigned char *cpage_out,
+			uint32_t *srclen, uint32_t *destlen);
+	int (*decompress)(unsigned char *cdata_in, unsigned char *data_out,
+			  uint32_t cdatalen, uint32_t datalen);
+	int usecount;
+	int disabled;		/* if set the compressor won't compress */
+	unsigned char *compr_buf;	/* used by size compr. mode */
+	uint32_t compr_buf_size;	/* used by size compr. mode */
+	uint32_t stat_compr_orig_size;
+	uint32_t stat_compr_new_size;
+	uint32_t stat_compr_blocks;
+	uint32_t stat_decompr_blocks;
+};
+
+int jffs2_register_compressor(struct jffs2_compressor *comp);
+int jffs2_unregister_compressor(struct jffs2_compressor *comp);
+
+int jffs2_compressors_init(void);
+int jffs2_compressors_exit(void);
+
+uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			unsigned char *data_in, unsigned char **cpage_out,
+			uint32_t *datalen, uint32_t *cdatalen);
+
+int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+		     uint16_t comprtype, unsigned char *cdata_in,
+		     unsigned char *data_out, uint32_t cdatalen, uint32_t datalen);
+
+void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig);
+
+/* Compressor modules */
+/* These functions will be called by jffs2_compressors_init/exit */
+
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RUBIN
+int jffs2_rubinmips_init(void);
+void jffs2_rubinmips_exit(void);
+int jffs2_dynrubin_init(void);
+void jffs2_dynrubin_exit(void);
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RTIME
+int jffs2_rtime_init(void);
+void jffs2_rtime_exit(void);
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_ZLIB
+int jffs2_zlib_init(void);
+void jffs2_zlib_exit(void);
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_LZO
+int jffs2_lzo_init(void);
+void jffs2_lzo_exit(void);
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RTIME
+int jffs2_rtime_init(void);
+void jffs2_rtime_exit(void);
+#endif
+#ifdef CONFIG_FS_JFFS2_COMPRESSION_RUBIN
+int jffs2_dynrubin_init(void);
+void jffs2_dynrubin_exit(void);
+#endif
+
+#endif /* __JFFS2_COMPR_H__ */
diff --git a/fs/jffs2/compr_lzo.c b/fs/jffs2/compr_lzo.c
new file mode 100644
index 0000000000..1be30dc604
--- /dev/null
+++ b/fs/jffs2/compr_lzo.c
@@ -0,0 +1,52 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2007 Nokia Corporation. All rights reserved.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by Richard Purdie <rpurdie@openedhand.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#include <common.h>
+#include <lzo.h>
+#include <linux/kernel.h>
+#include "compr.h"
+
+static int jffs2_lzo_decompress(unsigned char *data_in, unsigned char *cpage_out,
+				 uint32_t srclen, uint32_t destlen)
+{
+	size_t dl = destlen;
+	int ret;
+
+	ret = lzo1x_decompress_safe(data_in, srclen, cpage_out, &dl);
+
+	if (ret != LZO_E_OK || dl != destlen)
+		return -1;
+
+	return 0;
+}
+
+static struct jffs2_compressor jffs2_lzo_comp = {
+	.priority = JFFS2_LZO_PRIORITY,
+	.name = "lzo",
+	.compr = JFFS2_COMPR_LZO,
+	.decompress = &jffs2_lzo_decompress,
+	.disabled = 0,
+};
+
+int __init jffs2_lzo_init(void)
+{
+	int ret;
+
+	ret = jffs2_register_compressor(&jffs2_lzo_comp);
+
+	return ret;
+}
+
+void jffs2_lzo_exit(void)
+{
+	jffs2_unregister_compressor(&jffs2_lzo_comp);
+}
diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
new file mode 100644
index 0000000000..d74d7d3d79
--- /dev/null
+++ b/fs/jffs2/compr_rtime.c
@@ -0,0 +1,86 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by Arjan van de Ven <arjanv@redhat.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ *
+ *
+ * Very simple lz77-ish encoder.
+ *
+ * Theory of operation: Both encoder and decoder have a list of "last
+ * occurrences" for every possible source-value; after sending the
+ * first source-byte, the second byte indicated the "run" length of
+ * matches
+ *
+ * The algorithm is intended to only send "whole bytes", no bit-messing.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/jffs2.h>
+#include "compr.h"
+
+static int jffs2_rtime_decompress(unsigned char *data_in,
+				  unsigned char *cpage_out,
+				  uint32_t srclen, uint32_t destlen)
+{
+	unsigned short positions[256];
+	int outpos = 0;
+	int pos=0;
+
+	memset(positions,0,sizeof(positions));
+
+	while (outpos<destlen) {
+		unsigned char value;
+		int backoffs;
+		int repeat;
+
+		value = data_in[pos++];
+		cpage_out[outpos++] = value; /* first the verbatim copied byte */
+		repeat = data_in[pos++];
+		backoffs = positions[value];
+
+		positions[value]=outpos;
+		if (repeat) {
+			if (backoffs + repeat >= outpos) {
+				while(repeat) {
+					cpage_out[outpos++] = cpage_out[backoffs++];
+					repeat--;
+				}
+			} else {
+				memcpy(&cpage_out[outpos],&cpage_out[backoffs],repeat);
+				outpos+=repeat;
+			}
+		}
+	}
+	return 0;
+}
+
+static struct jffs2_compressor jffs2_rtime_comp = {
+    .priority = JFFS2_RTIME_PRIORITY,
+    .name = "rtime",
+    .compr = JFFS2_COMPR_RTIME,
+    .decompress = &jffs2_rtime_decompress,
+#ifdef JFFS2_RTIME_DISABLED
+    .disabled = 1,
+#else
+    .disabled = 0,
+#endif
+};
+
+int jffs2_rtime_init(void)
+{
+    return jffs2_register_compressor(&jffs2_rtime_comp);
+}
+
+void jffs2_rtime_exit(void)
+{
+    jffs2_unregister_compressor(&jffs2_rtime_comp);
+}
diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
new file mode 100644
index 0000000000..3e4faa739a
--- /dev/null
+++ b/fs/jffs2/compr_rubin.c
@@ -0,0 +1,270 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by Arjan van de Ven <arjanv@redhat.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/jffs2.h>
+#include "compr.h"
+
+
+#define RUBIN_REG_SIZE   16
+#define UPPER_BIT_RUBIN    (((long) 1)<<(RUBIN_REG_SIZE-1))
+#define LOWER_BITS_RUBIN   ((((long) 1)<<(RUBIN_REG_SIZE-1))-1)
+
+
+#define BIT_DIVIDER_MIPS 1043
+static int bits_mips[8] = { 277, 249, 290, 267, 229, 341, 212, 241};
+
+struct pushpull {
+	unsigned char *buf;
+	unsigned int buflen;
+	unsigned int ofs;
+	unsigned int reserve;
+};
+
+struct rubin_state {
+	unsigned long p;
+	unsigned long q;
+	unsigned long rec_q;
+	long bit_number;
+	struct pushpull pp;
+	int bit_divider;
+	int bits[8];
+};
+
+static inline void init_pushpull(struct pushpull *pp, char *buf,
+				 unsigned buflen, unsigned ofs,
+				 unsigned reserve)
+{
+	pp->buf = buf;
+	pp->buflen = buflen;
+	pp->ofs = ofs;
+	pp->reserve = reserve;
+}
+
+static inline int pushbit(struct pushpull *pp, int bit, int use_reserved)
+{
+	if (pp->ofs >= pp->buflen - (use_reserved?0:pp->reserve))
+		return -ENOSPC;
+
+	if (bit)
+		pp->buf[pp->ofs >> 3] |= (1<<(7-(pp->ofs & 7)));
+	else
+		pp->buf[pp->ofs >> 3] &= ~(1<<(7-(pp->ofs & 7)));
+
+	pp->ofs++;
+
+	return 0;
+}
+
+static inline int pushedbits(struct pushpull *pp)
+{
+	return pp->ofs;
+}
+
+static inline int pullbit(struct pushpull *pp)
+{
+	int bit;
+
+	bit = (pp->buf[pp->ofs >> 3] >> (7-(pp->ofs & 7))) & 1;
+
+	pp->ofs++;
+	return bit;
+}
+
+
+static void init_rubin(struct rubin_state *rs, int div, int *bits)
+{
+	int c;
+
+	rs->q = 0;
+	rs->p = (long) (2 * UPPER_BIT_RUBIN);
+	rs->bit_number = (long) 0;
+	rs->bit_divider = div;
+
+	for (c=0; c<8; c++)
+		rs->bits[c] = bits[c];
+}
+
+static void init_decode(struct rubin_state *rs, int div, int *bits)
+{
+	init_rubin(rs, div, bits);
+
+	/* behalve lower */
+	rs->rec_q = 0;
+
+	for (rs->bit_number = 0; rs->bit_number++ < RUBIN_REG_SIZE;
+	     rs->rec_q = rs->rec_q * 2 + (long) (pullbit(&rs->pp)))
+		;
+}
+
+static void __do_decode(struct rubin_state *rs, unsigned long p,
+			unsigned long q)
+{
+	register unsigned long lower_bits_rubin = LOWER_BITS_RUBIN;
+	unsigned long rec_q;
+	int c, bits = 0;
+
+	/*
+	 * First, work out how many bits we need from the input stream.
+	 * Note that we have already done the initial check on this
+	 * loop prior to calling this function.
+	 */
+	do {
+		bits++;
+		q &= lower_bits_rubin;
+		q <<= 1;
+		p <<= 1;
+	} while ((q >= UPPER_BIT_RUBIN) || ((p + q) <= UPPER_BIT_RUBIN));
+
+	rs->p = p;
+	rs->q = q;
+
+	rs->bit_number += bits;
+
+	/*
+	 * Now get the bits.  We really want this to be "get n bits".
+	 */
+	rec_q = rs->rec_q;
+	do {
+		c = pullbit(&rs->pp);
+		rec_q &= lower_bits_rubin;
+		rec_q <<= 1;
+		rec_q += c;
+	} while (--bits);
+	rs->rec_q = rec_q;
+}
+
+static int decode(struct rubin_state *rs, long A, long B)
+{
+	unsigned long p = rs->p, q = rs->q;
+	long i0, threshold;
+	int symbol;
+
+	if (q >= UPPER_BIT_RUBIN || ((p + q) <= UPPER_BIT_RUBIN))
+		__do_decode(rs, p, q);
+
+	i0 = A * rs->p / (A + B);
+	if (i0 <= 0)
+		i0 = 1;
+
+	if (i0 >= rs->p)
+		i0 = rs->p - 1;
+
+	threshold = rs->q + i0;
+	symbol = rs->rec_q >= threshold;
+	if (rs->rec_q >= threshold) {
+		rs->q += i0;
+		i0 = rs->p - i0;
+	}
+
+	rs->p = i0;
+
+	return symbol;
+}
+
+static int in_byte(struct rubin_state *rs)
+{
+	int i, result = 0, bit_divider = rs->bit_divider;
+
+	for (i = 0; i < 8; i++)
+		result |= decode(rs, bit_divider - rs->bits[i],
+				 rs->bits[i]) << i;
+
+	return result;
+}
+
+static void rubin_do_decompress(int bit_divider, int *bits,
+				unsigned char *cdata_in,
+				unsigned char *page_out, uint32_t srclen,
+				uint32_t destlen)
+{
+	int outpos = 0;
+	struct rubin_state rs;
+
+	init_pushpull(&rs.pp, cdata_in, srclen, 0, 0);
+	init_decode(&rs, bit_divider, bits);
+
+	while (outpos < destlen)
+		page_out[outpos++] = in_byte(&rs);
+}
+
+
+static int jffs2_rubinmips_decompress(unsigned char *data_in,
+				      unsigned char *cpage_out,
+				      uint32_t sourcelen, uint32_t dstlen)
+{
+	rubin_do_decompress(BIT_DIVIDER_MIPS, bits_mips, data_in,
+			    cpage_out, sourcelen, dstlen);
+	return 0;
+}
+
+static int jffs2_dynrubin_decompress(unsigned char *data_in,
+				     unsigned char *cpage_out,
+				     uint32_t sourcelen, uint32_t dstlen)
+{
+	int bits[8];
+	int c;
+
+	for (c=0; c<8; c++)
+		bits[c] = data_in[c];
+
+	rubin_do_decompress(256, bits, data_in+8, cpage_out, sourcelen-8,
+			    dstlen);
+	return 0;
+}
+
+static struct jffs2_compressor jffs2_rubinmips_comp = {
+	.priority = JFFS2_RUBINMIPS_PRIORITY,
+	.name = "rubinmips",
+	.compr = JFFS2_COMPR_DYNRUBIN,
+	.decompress = &jffs2_rubinmips_decompress,
+#ifdef JFFS2_RUBINMIPS_DISABLED
+	.disabled = 1,
+#else
+	.disabled = 0,
+#endif
+};
+
+int jffs2_rubinmips_init(void)
+{
+	return jffs2_register_compressor(&jffs2_rubinmips_comp);
+}
+
+void jffs2_rubinmips_exit(void)
+{
+	jffs2_unregister_compressor(&jffs2_rubinmips_comp);
+}
+
+static struct jffs2_compressor jffs2_dynrubin_comp = {
+	.priority = JFFS2_DYNRUBIN_PRIORITY,
+	.name = "dynrubin",
+	.compr = JFFS2_COMPR_RUBINMIPS,
+	.decompress = &jffs2_dynrubin_decompress,
+#ifdef JFFS2_DYNRUBIN_DISABLED
+	.disabled = 1,
+#else
+	.disabled = 0,
+#endif
+};
+
+int jffs2_dynrubin_init(void)
+{
+	return jffs2_register_compressor(&jffs2_dynrubin_comp);
+}
+
+void jffs2_dynrubin_exit(void)
+{
+	jffs2_unregister_compressor(&jffs2_dynrubin_comp);
+}
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
new file mode 100644
index 0000000000..222e0d6e5f
--- /dev/null
+++ b/fs/jffs2/compr_zlib.c
@@ -0,0 +1,105 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <linux/kernel.h>
+#include <linux/zlib.h>
+#include <linux/zutil.h>
+#include "nodelist.h"
+#include "compr.h"
+
+	/* Plan: call deflate() with avail_in == *sourcelen,
+		avail_out = *dstlen - 12 and flush == Z_FINISH.
+		If it doesn't manage to finish,	call it again with
+		avail_in == 0 and avail_out set to the remaining 12
+		bytes for it to clean up.
+	   Q: Is 12 bytes sufficient?
+	*/
+#define STREAM_END_SPACE 12
+
+static struct z_stream_s inf_strm;
+
+static int jffs2_zlib_decompress(unsigned char *data_in,
+				 unsigned char *cpage_out,
+				 uint32_t srclen, uint32_t destlen)
+{
+	int ret;
+	int wbits = MAX_WBITS;
+
+	inf_strm.next_in = data_in;
+	inf_strm.avail_in = srclen;
+	inf_strm.total_in = 0;
+
+	inf_strm.next_out = cpage_out;
+	inf_strm.avail_out = destlen;
+	inf_strm.total_out = 0;
+
+	/* If it's deflate, and it's got no preset dictionary, then
+	   we can tell zlib to skip the adler32 check. */
+	if (srclen > 2 && !(data_in[1] & PRESET_DICT) &&
+	    ((data_in[0] & 0x0f) == Z_DEFLATED) &&
+	    !(((data_in[0]<<8) + data_in[1]) % 31)) {
+
+		jffs2_dbg(2, "inflate skipping adler32\n");
+		wbits = -((data_in[0] >> 4) + 8);
+		inf_strm.next_in += 2;
+		inf_strm.avail_in -= 2;
+	} else {
+		/* Let this remain D1 for now -- it should never happen */
+		jffs2_dbg(1, "inflate not skipping adler32\n");
+	}
+
+
+	if (Z_OK != zlib_inflateInit2(&inf_strm, wbits)) {
+		pr_warn("inflateInit failed\n");
+		return 1;
+	}
+
+	while((ret = zlib_inflate(&inf_strm, Z_FINISH)) == Z_OK)
+		;
+	if (ret != Z_STREAM_END) {
+		pr_notice("inflate returned %d\n", ret);
+	}
+	zlib_inflateEnd(&inf_strm);
+	return 0;
+}
+
+static struct jffs2_compressor jffs2_zlib_comp = {
+    .priority = JFFS2_ZLIB_PRIORITY,
+    .name = "zlib",
+    .compr = JFFS2_COMPR_ZLIB,
+    .decompress = &jffs2_zlib_decompress,
+#ifdef JFFS2_ZLIB_DISABLED
+    .disabled = 1,
+#else
+    .disabled = 0,
+#endif
+};
+
+int __init jffs2_zlib_init(void)
+{
+    int ret;
+
+    inf_strm.workspace = vmalloc(zlib_inflate_workspacesize());
+    jffs2_dbg(1, "Allocated %d bytes for inflate workspace\n",
+	      zlib_inflate_workspacesize());
+
+    ret = jffs2_register_compressor(&jffs2_zlib_comp);
+
+    return ret;
+}
+
+void jffs2_zlib_exit(void)
+{
+	jffs2_unregister_compressor(&jffs2_zlib_comp);
+	vfree(inf_strm.workspace);
+}
diff --git a/fs/jffs2/debug.c b/fs/jffs2/debug.c
new file mode 100644
index 0000000000..536a1786c1
--- /dev/null
+++ b/fs/jffs2/debug.c
@@ -0,0 +1,868 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <common.h>
+#include <crc.h>
+#include <fs.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pagemap.h>
+#include <linux/jffs2.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include "nodelist.h"
+#include "debug.h"
+
+#ifdef JFFS2_DBG_SANITY_CHECKS
+
+void
+__jffs2_dbg_acct_sanity_check_nolock(struct jffs2_sb_info *c,
+				     struct jffs2_eraseblock *jeb)
+{
+	if (unlikely(jeb && jeb->used_size + jeb->dirty_size +
+			jeb->free_size + jeb->wasted_size +
+			jeb->unchecked_size != c->sector_size)) {
+		JFFS2_ERROR("eeep, space accounting for block at 0x%08x is screwed.\n", jeb->offset);
+		JFFS2_ERROR("free %#08x + dirty %#08x + used %#08x + wasted %#08x + unchecked %#08x != total %#08x.\n",
+			jeb->free_size, jeb->dirty_size, jeb->used_size,
+			jeb->wasted_size, jeb->unchecked_size, c->sector_size);
+		BUG();
+	}
+
+	if (unlikely(c->used_size + c->dirty_size + c->free_size + c->erasing_size + c->bad_size
+				+ c->wasted_size + c->unchecked_size != c->flash_size)) {
+		JFFS2_ERROR("eeep, space accounting superblock info is screwed.\n");
+		JFFS2_ERROR("free %#08x + dirty %#08x + used %#08x + erasing %#08x + bad %#08x + wasted %#08x + unchecked %#08x != total %#08x.\n",
+			c->free_size, c->dirty_size, c->used_size, c->erasing_size, c->bad_size,
+			c->wasted_size, c->unchecked_size, c->flash_size);
+		BUG();
+	}
+}
+
+void
+__jffs2_dbg_acct_sanity_check(struct jffs2_sb_info *c,
+			      struct jffs2_eraseblock *jeb)
+{
+	spin_lock(&c->erase_completion_lock);
+	jffs2_dbg_acct_sanity_check_nolock(c, jeb);
+	spin_unlock(&c->erase_completion_lock);
+}
+
+#endif /* JFFS2_DBG_SANITY_CHECKS */
+
+#ifdef JFFS2_DBG_PARANOIA_CHECKS
+/*
+ * Check the fragtree.
+ */
+void
+__jffs2_dbg_fragtree_paranoia_check(struct jffs2_inode_info *f)
+{
+	mutex_lock(&f->sem);
+	__jffs2_dbg_fragtree_paranoia_check_nolock(f);
+	mutex_unlock(&f->sem);
+}
+
+void
+__jffs2_dbg_fragtree_paranoia_check_nolock(struct jffs2_inode_info *f)
+{
+	struct jffs2_node_frag *frag;
+	int bitched = 0;
+
+	for (frag = frag_first(&f->fragtree); frag; frag = frag_next(frag)) {
+		struct jffs2_full_dnode *fn = frag->node;
+
+		if (!fn || !fn->raw)
+			continue;
+
+		if (ref_flags(fn->raw) == REF_PRISTINE) {
+			if (fn->frags > 1) {
+				JFFS2_ERROR("REF_PRISTINE node at 0x%08x had %d frags. Tell dwmw2.\n",
+					ref_offset(fn->raw), fn->frags);
+				bitched = 1;
+			}
+
+			/* A hole node which isn't multi-page should be garbage-collected
+			   and merged anyway, so we just check for the frag size here,
+			   rather than mucking around with actually reading the node
+			   and checking the compression type, which is the real way
+			   to tell a hole node. */
+			if (frag->ofs & (PAGE_SIZE-1) && frag_prev(frag)
+					&& frag_prev(frag)->size < PAGE_SIZE && frag_prev(frag)->node) {
+				JFFS2_ERROR("REF_PRISTINE node at 0x%08x had a previous non-hole frag in the same page. Tell dwmw2.\n",
+					ref_offset(fn->raw));
+				bitched = 1;
+			}
+
+			if ((frag->ofs+frag->size) & (PAGE_SIZE-1) && frag_next(frag)
+					&& frag_next(frag)->size < PAGE_SIZE && frag_next(frag)->node) {
+				JFFS2_ERROR("REF_PRISTINE node at 0x%08x (%08x-%08x) had a following non-hole frag in the same page. Tell dwmw2.\n",
+				       ref_offset(fn->raw), frag->ofs, frag->ofs+frag->size);
+				bitched = 1;
+			}
+		}
+	}
+
+	if (bitched) {
+		JFFS2_ERROR("fragtree is corrupted.\n");
+		__jffs2_dbg_dump_fragtree_nolock(f);
+		BUG();
+	}
+}
+
+/*
+ * Check if the flash contains all 0xFF before we start writing.
+ */
+void
+__jffs2_dbg_prewrite_paranoia_check(struct jffs2_sb_info *c,
+				    uint32_t ofs, int len)
+{
+	size_t retlen;
+	int ret, i;
+	unsigned char *buf;
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	ret = jffs2_flash_read(c, ofs, len, &retlen, buf);
+	if (ret || (retlen != len)) {
+		JFFS2_WARNING("read %d bytes failed or short. ret %d, retlen %zd.\n",
+				len, ret, retlen);
+		kfree(buf);
+		return;
+	}
+
+	ret = 0;
+	for (i = 0; i < len; i++)
+		if (buf[i] != 0xff)
+			ret = 1;
+
+	if (ret) {
+		JFFS2_ERROR("argh, about to write node to %#08x on flash, but there are data already there. The first corrupted byte is at %#08x offset.\n",
+			ofs, ofs + i);
+		__jffs2_dbg_dump_buffer(buf, len, ofs);
+		kfree(buf);
+		BUG();
+	}
+
+	kfree(buf);
+}
+
+void __jffs2_dbg_superblock_counts(struct jffs2_sb_info *c)
+{
+	struct jffs2_eraseblock *jeb;
+	uint32_t free = 0, dirty = 0, used = 0, wasted = 0,
+		erasing = 0, bad = 0, unchecked = 0;
+	int nr_counted = 0;
+	int dump = 0;
+
+	if (c->gcblock) {
+		nr_counted++;
+		free += c->gcblock->free_size;
+		dirty += c->gcblock->dirty_size;
+		used += c->gcblock->used_size;
+		wasted += c->gcblock->wasted_size;
+		unchecked += c->gcblock->unchecked_size;
+	}
+	if (c->nextblock) {
+		nr_counted++;
+		free += c->nextblock->free_size;
+		dirty += c->nextblock->dirty_size;
+		used += c->nextblock->used_size;
+		wasted += c->nextblock->wasted_size;
+		unchecked += c->nextblock->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->clean_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->very_dirty_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->dirty_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->erasable_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->erasable_pending_wbuf_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->erase_pending_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->free_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+	list_for_each_entry(jeb, &c->bad_used_list, list) {
+		nr_counted++;
+		free += jeb->free_size;
+		dirty += jeb->dirty_size;
+		used += jeb->used_size;
+		wasted += jeb->wasted_size;
+		unchecked += jeb->unchecked_size;
+	}
+
+	list_for_each_entry(jeb, &c->erasing_list, list) {
+		nr_counted++;
+		erasing += c->sector_size;
+	}
+	list_for_each_entry(jeb, &c->erase_checking_list, list) {
+		nr_counted++;
+		erasing += c->sector_size;
+	}
+	list_for_each_entry(jeb, &c->erase_complete_list, list) {
+		nr_counted++;
+		erasing += c->sector_size;
+	}
+	list_for_each_entry(jeb, &c->bad_list, list) {
+		nr_counted++;
+		bad += c->sector_size;
+	}
+
+#define check(sz)							\
+do {									\
+	if (sz != c->sz##_size) {					\
+		pr_warn("%s_size mismatch counted 0x%x, c->%s_size 0x%x\n", \
+			#sz, sz, #sz, c->sz##_size);			\
+		dump = 1;						\
+	}								\
+} while (0)
+
+	check(free);
+	check(dirty);
+	check(used);
+	check(wasted);
+	check(unchecked);
+	check(bad);
+	check(erasing);
+
+#undef check
+
+	if (nr_counted != c->nr_blocks) {
+		pr_warn("%s counted only 0x%x blocks of 0x%x. Where are the others?\n",
+			__func__, nr_counted, c->nr_blocks);
+		dump = 1;
+	}
+
+	if (dump) {
+		__jffs2_dbg_dump_block_lists_nolock(c);
+		BUG();
+	}
+}
+
+/*
+ * Check the space accounting and node_ref list correctness for the JFFS2 erasable block 'jeb'.
+ */
+void
+__jffs2_dbg_acct_paranoia_check(struct jffs2_sb_info *c,
+				struct jffs2_eraseblock *jeb)
+{
+	spin_lock(&c->erase_completion_lock);
+	__jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
+	spin_unlock(&c->erase_completion_lock);
+}
+
+void
+__jffs2_dbg_acct_paranoia_check_nolock(struct jffs2_sb_info *c,
+				       struct jffs2_eraseblock *jeb)
+{
+	uint32_t my_used_size = 0;
+	uint32_t my_unchecked_size = 0;
+	uint32_t my_dirty_size = 0;
+	struct jffs2_raw_node_ref *ref2 = jeb->first_node;
+
+	while (ref2) {
+		uint32_t totlen = ref_totlen(c, jeb, ref2);
+
+		if (ref_offset(ref2) < jeb->offset ||
+				ref_offset(ref2) > jeb->offset + c->sector_size) {
+			JFFS2_ERROR("node_ref %#08x shouldn't be in block at %#08x.\n",
+				ref_offset(ref2), jeb->offset);
+			goto error;
+
+		}
+		if (ref_flags(ref2) == REF_UNCHECKED)
+			my_unchecked_size += totlen;
+		else if (!ref_obsolete(ref2))
+			my_used_size += totlen;
+		else
+			my_dirty_size += totlen;
+
+		if ((!ref_next(ref2)) != (ref2 == jeb->last_node)) {
+			JFFS2_ERROR("node_ref for node at %#08x (mem %p) has next at %#08x (mem %p), last_node is at %#08x (mem %p).\n",
+				    ref_offset(ref2), ref2, ref_offset(ref_next(ref2)), ref_next(ref2),
+				    ref_offset(jeb->last_node), jeb->last_node);
+			goto error;
+		}
+		ref2 = ref_next(ref2);
+	}
+
+	if (my_used_size != jeb->used_size) {
+		JFFS2_ERROR("Calculated used size %#08x != stored used size %#08x.\n",
+			my_used_size, jeb->used_size);
+		goto error;
+	}
+
+	if (my_unchecked_size != jeb->unchecked_size) {
+		JFFS2_ERROR("Calculated unchecked size %#08x != stored unchecked size %#08x.\n",
+			my_unchecked_size, jeb->unchecked_size);
+		goto error;
+	}
+
+#if 0
+	/* This should work when we implement ref->__totlen elemination */
+	if (my_dirty_size != jeb->dirty_size + jeb->wasted_size) {
+		JFFS2_ERROR("Calculated dirty+wasted size %#08x != stored dirty + wasted size %#08x\n",
+			my_dirty_size, jeb->dirty_size + jeb->wasted_size);
+		goto error;
+	}
+
+	if (jeb->free_size == 0
+		&& my_used_size + my_unchecked_size + my_dirty_size != c->sector_size) {
+		JFFS2_ERROR("The sum of all nodes in block (%#x) != size of block (%#x)\n",
+			my_used_size + my_unchecked_size + my_dirty_size,
+			c->sector_size);
+		goto error;
+	}
+#endif
+
+	if (!(c->flags & (JFFS2_SB_FLAG_BUILDING|JFFS2_SB_FLAG_SCANNING)))
+		__jffs2_dbg_superblock_counts(c);
+
+	return;
+
+error:
+	__jffs2_dbg_dump_node_refs_nolock(c, jeb);
+	__jffs2_dbg_dump_jeb_nolock(jeb);
+	__jffs2_dbg_dump_block_lists_nolock(c);
+	BUG();
+
+}
+#endif /* JFFS2_DBG_PARANOIA_CHECKS */
+
+#if defined(JFFS2_DBG_DUMPS) || defined(JFFS2_DBG_PARANOIA_CHECKS)
+/*
+ * Dump the node_refs of the 'jeb' JFFS2 eraseblock.
+ */
+void
+__jffs2_dbg_dump_node_refs(struct jffs2_sb_info *c,
+			   struct jffs2_eraseblock *jeb)
+{
+	spin_lock(&c->erase_completion_lock);
+	__jffs2_dbg_dump_node_refs_nolock(c, jeb);
+	spin_unlock(&c->erase_completion_lock);
+}
+
+void
+__jffs2_dbg_dump_node_refs_nolock(struct jffs2_sb_info *c,
+				  struct jffs2_eraseblock *jeb)
+{
+	struct jffs2_raw_node_ref *ref;
+	int i = 0;
+
+	printk(JFFS2_DBG_MSG_PREFIX " Dump node_refs of the eraseblock %#08x\n", jeb->offset);
+	if (!jeb->first_node) {
+		printk(JFFS2_DBG_MSG_PREFIX " no nodes in the eraseblock %#08x\n", jeb->offset);
+		return;
+	}
+
+	printk(JFFS2_DBG);
+	for (ref = jeb->first_node; ; ref = ref_next(ref)) {
+		printk("%#08x", ref_offset(ref));
+#ifdef TEST_TOTLEN
+		printk("(%x)", ref->__totlen);
+#endif
+		if (ref_next(ref))
+			printk("->");
+		else
+			break;
+		if (++i == 4) {
+			i = 0;
+			printk("\n" JFFS2_DBG);
+		}
+	}
+	printk("\n");
+}
+
+/*
+ * Dump an eraseblock's space accounting.
+ */
+void
+__jffs2_dbg_dump_jeb(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
+{
+	spin_lock(&c->erase_completion_lock);
+	__jffs2_dbg_dump_jeb_nolock(jeb);
+	spin_unlock(&c->erase_completion_lock);
+}
+
+void
+__jffs2_dbg_dump_jeb_nolock(struct jffs2_eraseblock *jeb)
+{
+	if (!jeb)
+		return;
+
+	printk(JFFS2_DBG_MSG_PREFIX " dump space accounting for the eraseblock at %#08x:\n",
+			jeb->offset);
+
+	printk(JFFS2_DBG "used_size: %#08x\n",		jeb->used_size);
+	printk(JFFS2_DBG "dirty_size: %#08x\n",		jeb->dirty_size);
+	printk(JFFS2_DBG "wasted_size: %#08x\n",	jeb->wasted_size);
+	printk(JFFS2_DBG "unchecked_size: %#08x\n",	jeb->unchecked_size);
+	printk(JFFS2_DBG "free_size: %#08x\n",		jeb->free_size);
+}
+
+void
+__jffs2_dbg_dump_block_lists(struct jffs2_sb_info *c)
+{
+	spin_lock(&c->erase_completion_lock);
+	__jffs2_dbg_dump_block_lists_nolock(c);
+	spin_unlock(&c->erase_completion_lock);
+}
+
+void
+__jffs2_dbg_dump_block_lists_nolock(struct jffs2_sb_info *c)
+{
+	printk(JFFS2_DBG_MSG_PREFIX " dump JFFS2 blocks lists:\n");
+
+	printk(JFFS2_DBG "flash_size: %#08x\n",		c->flash_size);
+	printk(JFFS2_DBG "used_size: %#08x\n",		c->used_size);
+	printk(JFFS2_DBG "dirty_size: %#08x\n",		c->dirty_size);
+	printk(JFFS2_DBG "wasted_size: %#08x\n",	c->wasted_size);
+	printk(JFFS2_DBG "unchecked_size: %#08x\n",	c->unchecked_size);
+	printk(JFFS2_DBG "free_size: %#08x\n",		c->free_size);
+	printk(JFFS2_DBG "erasing_size: %#08x\n",	c->erasing_size);
+	printk(JFFS2_DBG "bad_size: %#08x\n",		c->bad_size);
+	printk(JFFS2_DBG "sector_size: %#08x\n",	c->sector_size);
+	printk(JFFS2_DBG "jffs2_reserved_blocks size: %#08x\n",
+				c->sector_size * c->resv_blocks_write);
+
+	if (c->nextblock)
+		printk(JFFS2_DBG "nextblock: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+			c->nextblock->offset, c->nextblock->used_size,
+			c->nextblock->dirty_size, c->nextblock->wasted_size,
+			c->nextblock->unchecked_size, c->nextblock->free_size);
+	else
+		printk(JFFS2_DBG "nextblock: NULL\n");
+
+	if (c->gcblock)
+		printk(JFFS2_DBG "gcblock: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+			c->gcblock->offset, c->gcblock->used_size, c->gcblock->dirty_size,
+			c->gcblock->wasted_size, c->gcblock->unchecked_size, c->gcblock->free_size);
+	else
+		printk(JFFS2_DBG "gcblock: NULL\n");
+
+	if (list_empty(&c->clean_list)) {
+		printk(JFFS2_DBG "clean_list: empty\n");
+	} else {
+		struct list_head *this;
+		int numblocks = 0;
+		uint32_t dirty = 0;
+
+		list_for_each(this, &c->clean_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+			numblocks ++;
+			dirty += jeb->wasted_size;
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "clean_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+
+		printk (JFFS2_DBG "Contains %d blocks with total wasted size %u, average wasted size: %u\n",
+			numblocks, dirty, dirty / numblocks);
+	}
+
+	if (list_empty(&c->very_dirty_list)) {
+		printk(JFFS2_DBG "very_dirty_list: empty\n");
+	} else {
+		struct list_head *this;
+		int numblocks = 0;
+		uint32_t dirty = 0;
+
+		list_for_each(this, &c->very_dirty_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			numblocks ++;
+			dirty += jeb->dirty_size;
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "very_dirty_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+
+		printk (JFFS2_DBG "Contains %d blocks with total dirty size %u, average dirty size: %u\n",
+			numblocks, dirty, dirty / numblocks);
+	}
+
+	if (list_empty(&c->dirty_list)) {
+		printk(JFFS2_DBG "dirty_list: empty\n");
+	} else {
+		struct list_head *this;
+		int numblocks = 0;
+		uint32_t dirty = 0;
+
+		list_for_each(this, &c->dirty_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			numblocks ++;
+			dirty += jeb->dirty_size;
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "dirty_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+
+		printk (JFFS2_DBG "contains %d blocks with total dirty size %u, average dirty size: %u\n",
+			numblocks, dirty, dirty / numblocks);
+	}
+
+	if (list_empty(&c->erasable_list)) {
+		printk(JFFS2_DBG "erasable_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->erasable_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "erasable_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+
+	if (list_empty(&c->erasing_list)) {
+		printk(JFFS2_DBG "erasing_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->erasing_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "erasing_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+	if (list_empty(&c->erase_checking_list)) {
+		printk(JFFS2_DBG "erase_checking_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->erase_checking_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "erase_checking_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+
+	if (list_empty(&c->erase_pending_list)) {
+		printk(JFFS2_DBG "erase_pending_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->erase_pending_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "erase_pending_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+
+	if (list_empty(&c->erasable_pending_wbuf_list)) {
+		printk(JFFS2_DBG "erasable_pending_wbuf_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->erasable_pending_wbuf_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "erasable_pending_wbuf_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+
+	if (list_empty(&c->free_list)) {
+		printk(JFFS2_DBG "free_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->free_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "free_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+
+	if (list_empty(&c->bad_list)) {
+		printk(JFFS2_DBG "bad_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->bad_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "bad_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+
+	if (list_empty(&c->bad_used_list)) {
+		printk(JFFS2_DBG "bad_used_list: empty\n");
+	} else {
+		struct list_head *this;
+
+		list_for_each(this, &c->bad_used_list) {
+			struct jffs2_eraseblock *jeb = list_entry(this, struct jffs2_eraseblock, list);
+
+			if (!(jeb->used_size == 0 && jeb->dirty_size == 0 && jeb->wasted_size == 0)) {
+				printk(JFFS2_DBG "bad_used_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
+					jeb->offset, jeb->used_size, jeb->dirty_size, jeb->wasted_size,
+					jeb->unchecked_size, jeb->free_size);
+			}
+		}
+	}
+}
+
+void
+__jffs2_dbg_dump_fragtree(struct jffs2_inode_info *f)
+{
+	mutex_lock(&f->sem);
+	jffs2_dbg_dump_fragtree_nolock(f);
+	mutex_unlock(&f->sem);
+}
+
+void
+__jffs2_dbg_dump_fragtree_nolock(struct jffs2_inode_info *f)
+{
+	struct jffs2_node_frag *this = frag_first(&f->fragtree);
+	uint32_t lastofs = 0;
+	int buggy = 0;
+
+	printk(JFFS2_DBG_MSG_PREFIX " dump fragtree of ino #%u\n", f->inocache->ino);
+	while(this) {
+		if (this->node)
+			printk(JFFS2_DBG "frag %#04x-%#04x: %#08x(%d) on flash (*%p), left (%p), right (%p), parent (%p)\n",
+				this->ofs, this->ofs+this->size, ref_offset(this->node->raw),
+				ref_flags(this->node->raw), this, frag_left(this), frag_right(this),
+				frag_parent(this));
+		else
+			printk(JFFS2_DBG "frag %#04x-%#04x: hole (*%p). left (%p), right (%p), parent (%p)\n",
+				this->ofs, this->ofs+this->size, this, frag_left(this),
+				frag_right(this), frag_parent(this));
+		if (this->ofs != lastofs)
+			buggy = 1;
+		lastofs = this->ofs + this->size;
+		this = frag_next(this);
+	}
+
+	if (f->metadata)
+		printk(JFFS2_DBG "metadata at 0x%08x\n", ref_offset(f->metadata->raw));
+
+	if (buggy) {
+		JFFS2_ERROR("frag tree got a hole in it.\n");
+		BUG();
+	}
+}
+
+#define JFFS2_BUFDUMP_BYTES_PER_LINE	32
+void
+__jffs2_dbg_dump_buffer(unsigned char *buf, int len, uint32_t offs)
+{
+	int skip;
+	int i;
+
+	printk(JFFS2_DBG_MSG_PREFIX " dump from offset %#08x to offset %#08x (%x bytes).\n",
+		offs, offs + len, len);
+	i = skip = offs % JFFS2_BUFDUMP_BYTES_PER_LINE;
+	offs = offs & ~(JFFS2_BUFDUMP_BYTES_PER_LINE - 1);
+
+	if (skip != 0)
+		printk(JFFS2_DBG "%#08x: ", offs);
+
+	while (skip--)
+		printk("   ");
+
+	while (i < len) {
+		if ((i % JFFS2_BUFDUMP_BYTES_PER_LINE) == 0 && i != len -1) {
+			if (i != 0)
+				printk("\n");
+			offs += JFFS2_BUFDUMP_BYTES_PER_LINE;
+			printk(JFFS2_DBG "%0#8x: ", offs);
+		}
+
+		printk("%02x ", buf[i]);
+
+		i += 1;
+	}
+
+	printk("\n");
+}
+
+/*
+ * Dump a JFFS2 node.
+ */
+void
+__jffs2_dbg_dump_node(struct jffs2_sb_info *c, uint32_t ofs)
+{
+	union jffs2_node_union node;
+	int len = sizeof(union jffs2_node_union);
+	size_t retlen;
+	uint32_t crc;
+	int ret;
+
+	printk(JFFS2_DBG_MSG_PREFIX " dump node at offset %#08x.\n", ofs);
+
+	ret = jffs2_flash_read(c, ofs, len, &retlen, (unsigned char *)&node);
+	if (ret || (retlen != len)) {
+		JFFS2_ERROR("read %d bytes failed or short. ret %d, retlen %zd.\n",
+			len, ret, retlen);
+		return;
+	}
+
+	printk(JFFS2_DBG "magic:\t%#04x\n", je16_to_cpu(node.u.magic));
+	printk(JFFS2_DBG "nodetype:\t%#04x\n", je16_to_cpu(node.u.nodetype));
+	printk(JFFS2_DBG "totlen:\t%#08x\n", je32_to_cpu(node.u.totlen));
+	printk(JFFS2_DBG "hdr_crc:\t%#08x\n", je32_to_cpu(node.u.hdr_crc));
+
+	crc = crc32(0, &node.u, sizeof(node.u) - 4);
+	if (crc != je32_to_cpu(node.u.hdr_crc)) {
+		JFFS2_ERROR("wrong common header CRC.\n");
+		return;
+	}
+
+	if (je16_to_cpu(node.u.magic) != JFFS2_MAGIC_BITMASK &&
+		je16_to_cpu(node.u.magic) != JFFS2_OLD_MAGIC_BITMASK)
+	{
+		JFFS2_ERROR("wrong node magic: %#04x instead of %#04x.\n",
+			je16_to_cpu(node.u.magic), JFFS2_MAGIC_BITMASK);
+		return;
+	}
+
+	switch(je16_to_cpu(node.u.nodetype)) {
+
+	case JFFS2_NODETYPE_INODE:
+
+		printk(JFFS2_DBG "the node is inode node\n");
+		printk(JFFS2_DBG "ino:\t%#08x\n", je32_to_cpu(node.i.ino));
+		printk(JFFS2_DBG "version:\t%#08x\n", je32_to_cpu(node.i.version));
+		printk(JFFS2_DBG "mode:\t%#08x\n", node.i.mode.m);
+		printk(JFFS2_DBG "uid:\t%#04x\n", je16_to_cpu(node.i.uid));
+		printk(JFFS2_DBG "gid:\t%#04x\n", je16_to_cpu(node.i.gid));
+		printk(JFFS2_DBG "isize:\t%#08x\n", je32_to_cpu(node.i.isize));
+		printk(JFFS2_DBG "atime:\t%#08x\n", je32_to_cpu(node.i.atime));
+		printk(JFFS2_DBG "mtime:\t%#08x\n", je32_to_cpu(node.i.mtime));
+		printk(JFFS2_DBG "ctime:\t%#08x\n", je32_to_cpu(node.i.ctime));
+		printk(JFFS2_DBG "offset:\t%#08x\n", je32_to_cpu(node.i.offset));
+		printk(JFFS2_DBG "csize:\t%#08x\n", je32_to_cpu(node.i.csize));
+		printk(JFFS2_DBG "dsize:\t%#08x\n", je32_to_cpu(node.i.dsize));
+		printk(JFFS2_DBG "compr:\t%#02x\n", node.i.compr);
+		printk(JFFS2_DBG "usercompr:\t%#02x\n", node.i.usercompr);
+		printk(JFFS2_DBG "flags:\t%#04x\n", je16_to_cpu(node.i.flags));
+		printk(JFFS2_DBG "data_crc:\t%#08x\n", je32_to_cpu(node.i.data_crc));
+		printk(JFFS2_DBG "node_crc:\t%#08x\n", je32_to_cpu(node.i.node_crc));
+
+		crc = crc32(0, &node.i, sizeof(node.i) - 8);
+		if (crc != je32_to_cpu(node.i.node_crc)) {
+			JFFS2_ERROR("wrong node header CRC.\n");
+			return;
+		}
+		break;
+
+	case JFFS2_NODETYPE_DIRENT:
+
+		printk(JFFS2_DBG "the node is dirent node\n");
+		printk(JFFS2_DBG "pino:\t%#08x\n", je32_to_cpu(node.d.pino));
+		printk(JFFS2_DBG "version:\t%#08x\n", je32_to_cpu(node.d.version));
+		printk(JFFS2_DBG "ino:\t%#08x\n", je32_to_cpu(node.d.ino));
+		printk(JFFS2_DBG "mctime:\t%#08x\n", je32_to_cpu(node.d.mctime));
+		printk(JFFS2_DBG "nsize:\t%#02x\n", node.d.nsize);
+		printk(JFFS2_DBG "type:\t%#02x\n", node.d.type);
+		printk(JFFS2_DBG "node_crc:\t%#08x\n", je32_to_cpu(node.d.node_crc));
+		printk(JFFS2_DBG "name_crc:\t%#08x\n", je32_to_cpu(node.d.name_crc));
+
+		node.d.name[node.d.nsize] = '\0';
+		printk(JFFS2_DBG "name:\t\"%s\"\n", node.d.name);
+
+		crc = crc32(0, &node.d, sizeof(node.d) - 8);
+		if (crc != je32_to_cpu(node.d.node_crc)) {
+			JFFS2_ERROR("wrong node header CRC.\n");
+			return;
+		}
+		break;
+
+	default:
+		printk(JFFS2_DBG "node type is unknown\n");
+		break;
+	}
+}
+#endif /* JFFS2_DBG_DUMPS || JFFS2_DBG_PARANOIA_CHECKS */
diff --git a/fs/jffs2/debug.h b/fs/jffs2/debug.h
new file mode 100644
index 0000000000..97733ecca7
--- /dev/null
+++ b/fs/jffs2/debug.h
@@ -0,0 +1,269 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef _JFFS2_DEBUG_H_
+#define _JFFS2_DEBUG_H_
+
+#include <linux/sched.h>
+
+#ifndef CONFIG_FS_JFFS2_FS_DEBUG
+#define CONFIG_FS_JFFS2_FS_DEBUG 0
+#endif
+
+#if CONFIG_FS_JFFS2_FS_DEBUG > 0
+/* Enable "paranoia" checks and dumps */
+#define JFFS2_DBG_PARANOIA_CHECKS
+#define JFFS2_DBG_DUMPS
+
+/*
+ * By defining/undefining the below macros one may select debugging messages
+ * fro specific JFFS2 subsystems.
+ */
+#define JFFS2_DBG_READINODE_MESSAGES
+#define JFFS2_DBG_FRAGTREE_MESSAGES
+#define JFFS2_DBG_DENTLIST_MESSAGES
+#define JFFS2_DBG_NODEREF_MESSAGES
+#define JFFS2_DBG_INOCACHE_MESSAGES
+#define JFFS2_DBG_SUMMARY_MESSAGES
+#define JFFS2_DBG_FSBUILD_MESSAGES
+#endif
+
+#if CONFIG_FS_JFFS2_FS_DEBUG > 1
+#define JFFS2_DBG_FRAGTREE2_MESSAGES
+#define JFFS2_DBG_READINODE2_MESSAGES
+#define JFFS2_DBG_MEMALLOC_MESSAGES
+#endif
+
+/* Sanity checks are supposed to be light-weight and enabled by default */
+#define JFFS2_DBG_SANITY_CHECKS
+
+/*
+ * Dx() are mainly used for debugging messages, they must go away and be
+ * superseded by nicer dbg_xxx() macros...
+ */
+#if CONFIG_FS_JFFS2_FS_DEBUG > 0
+#define DEBUG
+#define D1(x) x
+#else
+#define D1(x)
+#endif
+
+#if CONFIG_FS_JFFS2_FS_DEBUG > 1
+#define D2(x) x
+#else
+#define D2(x)
+#endif
+
+#define jffs2_dbg(level, fmt, ...)		\
+do {						\
+	if (CONFIG_FS_JFFS2_FS_DEBUG >= level)	\
+		pr_debug(fmt, ##__VA_ARGS__);	\
+} while (0)
+
+/* The prefixes of JFFS2 messages */
+#define JFFS2_DBG		KERN_DEBUG
+#define JFFS2_DBG_PREFIX	"[JFFS2 DBG]"
+#define JFFS2_DBG_MSG_PREFIX	JFFS2_DBG JFFS2_DBG_PREFIX
+
+/* JFFS2 message macros */
+#define JFFS2_ERROR(fmt, ...)	pr_err(fmt, ##__VA_ARGS__)
+
+#define JFFS2_WARNING(fmt, ...)	pr_warn(fmt, ##__VA_ARGS__)
+
+#define JFFS2_NOTICE(fmt, ...)	pr_notice(fmt, ##__VA_ARGS__)
+
+#define JFFS2_DEBUG(fmt, ...)						\
+	printk(KERN_DEBUG "[JFFS2 DBG] %s: " fmt,			\
+	       __func__, ##__VA_ARGS__)
+
+/*
+ * We split our debugging messages on several parts, depending on the JFFS2
+ * subsystem the message belongs to.
+ */
+/* Read inode debugging messages */
+#ifdef JFFS2_DBG_READINODE_MESSAGES
+#define dbg_readinode(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_readinode(fmt, ...)
+#endif
+#ifdef JFFS2_DBG_READINODE2_MESSAGES
+#define dbg_readinode2(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_readinode2(fmt, ...)
+#endif
+
+/* Fragtree build debugging messages */
+#ifdef JFFS2_DBG_FRAGTREE_MESSAGES
+#define dbg_fragtree(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_fragtree(fmt, ...)
+#endif
+#ifdef JFFS2_DBG_FRAGTREE2_MESSAGES
+#define dbg_fragtree2(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_fragtree2(fmt, ...)
+#endif
+
+/* Directory entry list manilulation debugging messages */
+#ifdef JFFS2_DBG_DENTLIST_MESSAGES
+#define dbg_dentlist(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_dentlist(fmt, ...)
+#endif
+
+/* Print the messages about manipulating node_refs */
+#ifdef JFFS2_DBG_NODEREF_MESSAGES
+#define dbg_noderef(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_noderef(fmt, ...)
+#endif
+
+/* Manipulations with the list of inodes (JFFS2 inocache) */
+#ifdef JFFS2_DBG_INOCACHE_MESSAGES
+#define dbg_inocache(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_inocache(fmt, ...)
+#endif
+
+/* Summary debugging messages */
+#ifdef JFFS2_DBG_SUMMARY_MESSAGES
+#define dbg_summary(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_summary(fmt, ...)
+#endif
+
+/* File system build messages */
+#ifdef JFFS2_DBG_FSBUILD_MESSAGES
+#define dbg_fsbuild(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_fsbuild(fmt, ...)
+#endif
+
+/* Watch the object allocations */
+#ifdef JFFS2_DBG_MEMALLOC_MESSAGES
+#define dbg_memalloc(fmt, ...)	JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_memalloc(fmt, ...)
+#endif
+
+/* Watch the XATTR subsystem */
+#ifdef JFFS2_DBG_XATTR_MESSAGES
+#define dbg_xattr(fmt, ...)  JFFS2_DEBUG(fmt, ##__VA_ARGS__)
+#else
+#define dbg_xattr(fmt, ...)
+#endif
+
+/* "Sanity" checks */
+void
+__jffs2_dbg_acct_sanity_check_nolock(struct jffs2_sb_info *c,
+				     struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_acct_sanity_check(struct jffs2_sb_info *c,
+			      struct jffs2_eraseblock *jeb);
+
+/* "Paranoia" checks */
+void
+__jffs2_dbg_fragtree_paranoia_check(struct jffs2_inode_info *f);
+void
+__jffs2_dbg_fragtree_paranoia_check_nolock(struct jffs2_inode_info *f);
+void
+__jffs2_dbg_acct_paranoia_check(struct jffs2_sb_info *c,
+			   	struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_acct_paranoia_check_nolock(struct jffs2_sb_info *c,
+				       struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_prewrite_paranoia_check(struct jffs2_sb_info *c,
+				    uint32_t ofs, int len);
+
+/* "Dump" functions */
+void
+__jffs2_dbg_dump_jeb(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_dump_jeb_nolock(struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_dump_block_lists(struct jffs2_sb_info *c);
+void
+__jffs2_dbg_dump_block_lists_nolock(struct jffs2_sb_info *c);
+void
+__jffs2_dbg_dump_node_refs(struct jffs2_sb_info *c,
+		 	   struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_dump_node_refs_nolock(struct jffs2_sb_info *c,
+				  struct jffs2_eraseblock *jeb);
+void
+__jffs2_dbg_dump_fragtree(struct jffs2_inode_info *f);
+void
+__jffs2_dbg_dump_fragtree_nolock(struct jffs2_inode_info *f);
+void
+__jffs2_dbg_dump_buffer(unsigned char *buf, int len, uint32_t offs);
+void
+__jffs2_dbg_dump_node(struct jffs2_sb_info *c, uint32_t ofs);
+
+#ifdef JFFS2_DBG_PARANOIA_CHECKS
+#define jffs2_dbg_fragtree_paranoia_check(f)			\
+	__jffs2_dbg_fragtree_paranoia_check(f)
+#define jffs2_dbg_fragtree_paranoia_check_nolock(f)		\
+	__jffs2_dbg_fragtree_paranoia_check_nolock(f)
+#define jffs2_dbg_acct_paranoia_check(c, jeb)			\
+	__jffs2_dbg_acct_paranoia_check(c,jeb)
+#define jffs2_dbg_acct_paranoia_check_nolock(c, jeb)		\
+	__jffs2_dbg_acct_paranoia_check_nolock(c,jeb)
+#define jffs2_dbg_prewrite_paranoia_check(c, ofs, len)		\
+	__jffs2_dbg_prewrite_paranoia_check(c, ofs, len)
+#else
+#define jffs2_dbg_fragtree_paranoia_check(f)
+#define jffs2_dbg_fragtree_paranoia_check_nolock(f)
+#define jffs2_dbg_acct_paranoia_check(c, jeb)
+#define jffs2_dbg_acct_paranoia_check_nolock(c, jeb)
+#define jffs2_dbg_prewrite_paranoia_check(c, ofs, len)
+#endif /* !JFFS2_PARANOIA_CHECKS */
+
+#ifdef JFFS2_DBG_DUMPS
+#define jffs2_dbg_dump_jeb(c, jeb)				\
+	__jffs2_dbg_dump_jeb(c, jeb);
+#define jffs2_dbg_dump_jeb_nolock(jeb)				\
+	__jffs2_dbg_dump_jeb_nolock(jeb);
+#define jffs2_dbg_dump_block_lists(c)				\
+	__jffs2_dbg_dump_block_lists(c)
+#define jffs2_dbg_dump_block_lists_nolock(c)			\
+	__jffs2_dbg_dump_block_lists_nolock(c)
+#define jffs2_dbg_dump_fragtree(f)				\
+	__jffs2_dbg_dump_fragtree(f);
+#define jffs2_dbg_dump_fragtree_nolock(f)			\
+	__jffs2_dbg_dump_fragtree_nolock(f);
+#define jffs2_dbg_dump_buffer(buf, len, offs)			\
+	__jffs2_dbg_dump_buffer(*buf, len, offs);
+#define jffs2_dbg_dump_node(c, ofs)				\
+	__jffs2_dbg_dump_node(c, ofs);
+#else
+#define jffs2_dbg_dump_jeb(c, jeb)
+#define jffs2_dbg_dump_jeb_nolock(jeb)
+#define jffs2_dbg_dump_block_lists(c)
+#define jffs2_dbg_dump_block_lists_nolock(c)
+#define jffs2_dbg_dump_fragtree(f)
+#define jffs2_dbg_dump_fragtree_nolock(f)
+#define jffs2_dbg_dump_buffer(buf, len, offs)
+#define jffs2_dbg_dump_node(c, ofs)
+#endif /* !JFFS2_DBG_DUMPS */
+
+#ifdef JFFS2_DBG_SANITY_CHECKS
+#define jffs2_dbg_acct_sanity_check(c, jeb)			\
+	__jffs2_dbg_acct_sanity_check(c, jeb)
+#define jffs2_dbg_acct_sanity_check_nolock(c, jeb)		\
+	__jffs2_dbg_acct_sanity_check_nolock(c, jeb)
+#else
+#define jffs2_dbg_acct_sanity_check(c, jeb)
+#define jffs2_dbg_acct_sanity_check_nolock(c, jeb)
+#endif /* !JFFS2_DBG_SANITY_CHECKS */
+
+#endif /* _JFFS2_DEBUG_H_ */
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
new file mode 100644
index 0000000000..4d28d2b553
--- /dev/null
+++ b/fs/jffs2/dir.c
@@ -0,0 +1,135 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <linux/fs.h>
+#include <linux/hash.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/jffs2.h>
+#include "jffs2_fs_i.h"
+#include "jffs2_fs_sb.h"
+#include <linux/time.h>
+#include "nodelist.h"
+
+static int jffs2_readdir (struct file *, struct dir_context *);
+
+static struct dentry *jffs2_lookup (struct inode *,struct dentry *,
+				    unsigned int);
+
+const struct file_operations jffs2_dir_operations =
+{
+	.read 	 = NULL,
+	.iterate = jffs2_readdir,
+};
+
+const struct inode_operations jffs2_dir_inode_operations =
+{
+	.lookup      =	jffs2_lookup,
+	.create      = NULL, /* not present in barebox */
+	.link        = NULL, /* not present in barebox */
+	.symlink     = NULL, /* not present in barebox */
+	.unlink      = NULL, /* not present in barebox */
+	.mkdir       = NULL, /* not present in barebox */
+	.rmdir       = NULL, /* not present in barebox */
+};
+
+/***********************************************************************/
+
+/* We keep the dirent list sorted in increasing order of name hash,
+   and we use the same hash function as the dentries. Makes this
+   nice and simple
+*/
+static struct dentry *jffs2_lookup(struct inode *dir_i, struct dentry *target,
+				   unsigned int flags)
+{
+	struct jffs2_inode_info *dir_f;
+	struct jffs2_full_dirent *fd = NULL, *fd_list;
+	uint32_t ino = 0;
+	struct inode *inode = NULL;
+	unsigned int nhash;
+
+	jffs2_dbg(1, "jffs2_lookup()\n");
+
+	if (target->d_name.len > JFFS2_MAX_NAME_LEN)
+		return ERR_PTR(-ENAMETOOLONG);
+
+	dir_f = JFFS2_INODE_INFO(dir_i);
+
+	/* The 'nhash' on the fd_list is not the same as the dentry hash */
+	nhash = full_name_hash(NULL, target->d_name.name, target->d_name.len);
+
+	mutex_lock(&dir_f->sem);
+
+	/* NB: The 2.2 backport will need to explicitly check for '.' and '..' here */
+	for (fd_list = dir_f->dents; fd_list && fd_list->nhash <= nhash; fd_list = fd_list->next) {
+		if (fd_list->nhash == nhash &&
+		    (!fd || fd_list->version > fd->version) &&
+		    strlen(fd_list->name) == target->d_name.len &&
+		    !strncmp(fd_list->name, target->d_name.name, target->d_name.len)) {
+			fd = fd_list;
+		}
+	}
+	if (fd)
+		ino = fd->ino;
+	mutex_unlock(&dir_f->sem);
+	if (ino) {
+		inode = jffs2_iget(dir_i->i_sb, ino);
+		if (IS_ERR(inode))
+			pr_warn("iget() failed for ino #%u\n", ino);
+	}
+
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
+	d_add(target, inode);
+	return NULL;
+}
+
+/***********************************************************************/
+
+
+static int jffs2_readdir(struct file *file, struct dir_context *ctx)
+{
+	struct inode *inode = file_inode(file);
+	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+	struct jffs2_full_dirent *fd;
+	unsigned long curofs = 1;
+
+	jffs2_dbg(1, "jffs2_readdir() for dir_i #%lu\n", inode->i_ino);
+
+	if (!dir_emit_dots(file, ctx))
+		return 0;
+
+	mutex_lock(&f->sem);
+	for (fd = f->dents; fd; fd = fd->next) {
+		curofs++;
+		/* First loop: curofs = 2; pos = 2 */
+		if (curofs < ctx->pos) {
+			jffs2_dbg(2, "Skipping dirent: \"%s\", ino #%u, type %d, because curofs %ld < offset %ld\n",
+				  fd->name, fd->ino, fd->type, curofs, (unsigned long)ctx->pos);
+			continue;
+		}
+		if (!fd->ino) {
+			jffs2_dbg(2, "Skipping deletion dirent \"%s\"\n",
+				  fd->name);
+			ctx->pos++;
+			continue;
+		}
+		jffs2_dbg(2, "Dirent %ld: \"%s\", ino #%u, type %d\n",
+			  (unsigned long)ctx->pos, fd->name, fd->ino, fd->type);
+		if (!dir_emit(ctx, fd->name, strlen(fd->name), fd->ino, fd->type))
+			break;
+		ctx->pos++;
+	}
+	mutex_unlock(&f->sem);
+	return 0;
+}
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
new file mode 100644
index 0000000000..f094291aa4
--- /dev/null
+++ b/fs/jffs2/fs.c
@@ -0,0 +1,483 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <crc.h>
+#include <driver.h>
+#include <init.h>
+#include <fs.h>
+#include <malloc.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/list.h>
+#include <linux/mtd/mtd.h>
+#include <linux/pagemap.h>
+#include <linux/stat.h>
+#include "compr.h"
+#include "nodelist.h"
+#include "os-linux.h"
+
+static int jffs2_flash_setup(struct jffs2_sb_info *c);
+
+/* from include/linux/fs.h */
+static inline void i_uid_write(struct inode *inode, uid_t uid)
+{
+	inode->i_uid = uid;
+}
+
+static inline void i_gid_write(struct inode *inode, gid_t gid)
+{
+	inode->i_gid = gid;
+}
+
+const struct file_operations jffs2_file_operations;
+const struct inode_operations jffs2_file_inode_operations;
+
+static int jffs2_open(struct device_d *dev, FILE *file, const char *filename)
+{
+	struct inode *inode = file->f_inode;
+	struct jffs2_file *jf;
+
+	jf = xzalloc(sizeof(*jf));
+
+	jf->inode = inode;
+	jf->buf = xmalloc(JFFS2_BLOCK_SIZE);
+	jf->offset = -1;
+
+	file->priv = jf;
+
+	return 0;
+}
+
+static int jffs2_close(struct device_d *dev, FILE *f)
+{
+	struct jffs2_file *jf = f->priv;
+
+	free(jf->buf);
+	free(jf);
+
+	return 0;
+}
+
+static int jffs2_get_block(struct jffs2_file *jf, unsigned int pos)
+{
+	struct jffs2_sb_info *c = JFFS2_SB_INFO(jf->inode->i_sb);
+	struct jffs2_inode_info *f = JFFS2_INODE_INFO(jf->inode);
+	int ret;
+
+	if (pos != jf->offset) {
+		ret = jffs2_read_inode_range(c, f, jf->buf, pos,
+					     JFFS2_BLOCK_SIZE);
+		if (ret && ret != -ENOENT)
+			return ret;
+		jf->offset = pos;
+	}
+
+	return 0;
+}
+
+static int jffs2_read(struct device_d *_dev, FILE *f, void *buf,
+		      size_t insize)
+{
+	struct jffs2_file *jf = f->priv;
+	unsigned int pos = f->pos;
+	unsigned int ofs;
+	unsigned int now;
+	unsigned int size = insize;
+	int ret;
+
+	/* Read till end of current block */
+	ofs = f->pos % JFFS2_BLOCK_SIZE;
+	if (ofs) {
+		ret = jffs2_get_block(jf, pos);
+		if (ret)
+			return ret;
+
+		now = min(size, JFFS2_BLOCK_SIZE - ofs);
+
+		memcpy(buf, jf->buf + ofs, now);
+		size -= now;
+		pos += now;
+		buf += now;
+	}
+
+	/* Do full blocks */
+	while (size >= JFFS2_BLOCK_SIZE) {
+		ret = jffs2_get_block(jf, pos);
+		if (ret)
+			return ret;
+
+		memcpy(buf, jf->buf, JFFS2_BLOCK_SIZE);
+		size -= JFFS2_BLOCK_SIZE;
+		pos += JFFS2_BLOCK_SIZE;
+		buf += JFFS2_BLOCK_SIZE;
+	}
+
+	/* And the rest */
+	if (size) {
+		ret = jffs2_get_block(jf, pos);
+		if (ret)
+			return ret;
+		memcpy(buf, jf->buf, size);
+	}
+
+	return insize;
+
+}
+
+struct inode *jffs2_iget(struct super_block *sb, unsigned long ino)
+{
+	struct jffs2_inode_info *f;
+	struct jffs2_sb_info *c;
+	struct jffs2_raw_inode latest_node;
+	struct inode *inode;
+	int ret;
+
+	jffs2_dbg(1, "%s(): ino == %lu\n", __func__, ino);
+
+	inode = iget_locked(sb, ino);
+	if (!inode)
+		return ERR_PTR(-ENOMEM);
+	if (!(inode->i_state & I_NEW))
+		return inode;
+
+	f = JFFS2_INODE_INFO(inode);
+	c = JFFS2_SB_INFO(inode->i_sb);
+
+	jffs2_init_inode_info(f);
+	mutex_lock(&f->sem);
+
+	ret = jffs2_do_read_inode(c, f, inode->i_ino, &latest_node);
+	if (ret)
+		goto error;
+
+	inode->i_mode = jemode_to_cpu(latest_node.mode);
+	i_uid_write(inode, je16_to_cpu(latest_node.uid));
+	i_gid_write(inode, je16_to_cpu(latest_node.gid));
+	inode->i_size = je32_to_cpu(latest_node.isize);
+	inode->i_atime = ITIME(je32_to_cpu(latest_node.atime));
+	inode->i_mtime = ITIME(je32_to_cpu(latest_node.mtime));
+	inode->i_ctime = ITIME(je32_to_cpu(latest_node.ctime));
+
+	set_nlink(inode, f->inocache->pino_nlink);
+
+	inode->i_blocks = (inode->i_size + 511) >> 9;
+
+	switch (inode->i_mode & S_IFMT) {
+
+	case S_IFLNK:
+		inode->i_op = &simple_symlink_inode_operations;
+		inode->i_link = f->target;
+		break;
+
+	case S_IFDIR:
+	{
+		struct jffs2_full_dirent *fd;
+		set_nlink(inode, 2); /* parent and '.' */
+
+		for (fd=f->dents; fd; fd = fd->next) {
+			if (fd->type == DT_DIR && fd->ino)
+				inc_nlink(inode);
+		}
+		/* Root dir gets i_nlink 3 for some reason */
+		if (inode->i_ino == 1)
+			inc_nlink(inode);
+
+		inode->i_op = &jffs2_dir_inode_operations;
+		inode->i_fop = &jffs2_dir_operations;
+		break;
+	}
+	case S_IFREG:
+		inode->i_op = &jffs2_file_inode_operations;
+		inode->i_fop = &jffs2_file_operations;
+		break;
+
+	case S_IFBLK:
+	case S_IFCHR:
+	case S_IFSOCK:
+	case S_IFIFO:
+		break;
+
+	default:
+		pr_warn("%s(): Bogus i_mode %o for ino %lu\n",
+			__func__, inode->i_mode, (unsigned long)inode->i_ino);
+	}
+
+	mutex_unlock(&f->sem);
+
+	jffs2_dbg(1, "jffs2_read_inode() returning\n");
+	return inode;
+
+error:
+	mutex_unlock(&f->sem);
+	iget_failed(inode);
+	return ERR_PTR(ret);
+}
+
+static int calculate_inocache_hashsize(uint32_t flash_size)
+{
+	/*
+	 * Pick a inocache hash size based on the size of the medium.
+	 * Count how many megabytes we're dealing with, apply a hashsize twice
+	 * that size, but rounding down to the usual big powers of 2. And keep
+	 * to sensible bounds.
+	 */
+
+	int size_mb = flash_size / 1024 / 1024;
+	int hashsize = (size_mb * 2) & ~0x3f;
+
+	if (hashsize < INOCACHE_HASHSIZE_MIN)
+		return INOCACHE_HASHSIZE_MIN;
+	if (hashsize > INOCACHE_HASHSIZE_MAX)
+		return INOCACHE_HASHSIZE_MAX;
+
+	return hashsize;
+}
+
+static void jffs2_put_super(struct super_block *sb)
+{
+	if (sb->s_fs_info) {
+		struct jffs2_sb_info *ctx = sb->s_fs_info;
+
+		jffs2_free_ino_caches(ctx);
+		jffs2_free_raw_node_refs(ctx);
+		kfree(ctx->blocks);
+		kfree(ctx->inocache_list);
+		jffs2_flash_cleanup(ctx);
+
+		kfree(sb->s_fs_info);
+	}
+}
+
+int jffs2_do_fill_super(struct super_block *sb, int silent)
+{
+	struct jffs2_sb_info *c;
+	struct inode *root_i;
+	int ret;
+	size_t blocks;
+
+	c = JFFS2_SB_INFO(sb);
+
+#ifndef CONFIG_JFFS2_FS_WRITEBUFFER
+	if (c->mtd->type == MTD_NANDFLASH) {
+		pr_err("Cannot operate on NAND flash unless jffs2 NAND support is compiled in");
+		return -EINVAL;
+	}
+	if (c->mtd->type == MTD_DATAFLASH) {
+		pr_err("Cannot operate on DataFlash unless jffs2 DataFlash support is compiled in");
+		return -EINVAL;
+	}
+#endif
+
+	c->flash_size = c->mtd->size;
+	c->sector_size = c->mtd->erasesize;
+	blocks = c->flash_size / c->sector_size;
+
+	/*
+	 * Size alignment check
+	 */
+	if ((c->sector_size * blocks) != c->flash_size) {
+		c->flash_size = c->sector_size * blocks;
+		pr_info("Flash size not aligned to erasesize, reducing to %dKiB",
+			c->flash_size / 1024);
+	}
+
+	if (c->flash_size < 5*c->sector_size) {
+		pr_err("Too few erase blocks (%d)",
+		       c->flash_size / c->sector_size);
+		return -EINVAL;
+	}
+
+	c->cleanmarker_size = sizeof(struct jffs2_unknown_node);
+
+	/* NAND (or other bizarre) flash... do setup accordingly */
+	ret = jffs2_flash_setup(c);
+	if (ret)
+		return ret;
+
+	c->inocache_hashsize = calculate_inocache_hashsize(c->flash_size);
+	c->inocache_list = kcalloc(c->inocache_hashsize, sizeof(struct jffs2_inode_cache *), GFP_KERNEL);
+	if (!c->inocache_list) {
+		ret = -ENOMEM;
+		goto out_wbuf;
+	}
+
+	jffs2_init_xattr_subsystem(c);
+
+	if ((ret = jffs2_do_mount_fs(c)))
+		goto out_inohash;
+
+	jffs2_dbg(1, "%s(): Getting root inode\n", __func__);
+	root_i = jffs2_iget(sb, 1);
+	if (IS_ERR(root_i)) {
+		jffs2_dbg(1, "get root inode failed\n");
+		ret = PTR_ERR(root_i);
+		goto out_root;
+	}
+
+	ret = -ENOMEM;
+
+	jffs2_dbg(1, "%s(): d_make_root()\n", __func__);
+	sb->s_root = d_make_root(root_i);
+	if (!sb->s_root)
+		goto out_root;
+
+	sb->s_maxbytes = 0xFFFFFFFF;
+	sb->s_blocksize = PAGE_SIZE;
+	sb->s_blocksize_bits = PAGE_SHIFT;
+	sb->s_magic = JFFS2_SUPER_MAGIC;
+
+	return 0;
+
+out_root:
+	jffs2_free_ino_caches(c);
+	jffs2_free_raw_node_refs(c);
+out_inohash:
+	kfree(c->inocache_list);
+out_wbuf:
+	jffs2_flash_cleanup(c);
+	return ret;
+}
+
+static int jffs2_flash_setup(struct jffs2_sb_info *c) {
+	int ret = 0;
+
+	if (jffs2_cleanmarker_oob(c)) {
+		/* NAND flash... do setup accordingly */
+		ret = jffs2_nand_flash_setup(c);
+		if (ret)
+			return ret;
+	}
+
+	/* and Dataflash */
+	if (jffs2_dataflash(c)) {
+		ret = jffs2_dataflash_setup(c);
+		if (ret)
+			return ret;
+	}
+
+	/* and an UBI volume */
+	if (jffs2_ubivol(c)) {
+		ret = jffs2_ubivol_setup(c);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+void jffs2_flash_cleanup(struct jffs2_sb_info *c) {
+
+	if (jffs2_cleanmarker_oob(c)) {
+		jffs2_nand_flash_cleanup(c);
+	}
+
+	/* and DataFlash */
+	if (jffs2_dataflash(c)) {
+		jffs2_dataflash_cleanup(c);
+	}
+
+	/* and Intel "Sibley" flash */
+	if (jffs2_nor_wbuf_flash(c)) {
+		jffs2_nor_wbuf_flash_cleanup(c);
+	}
+
+	/* and an UBI volume */
+	if (jffs2_ubivol(c)) {
+		jffs2_ubivol_cleanup(c);
+	}
+}
+
+static int jffs2_probe(struct device_d *dev)
+{
+	struct fs_device_d *fsdev;
+	struct super_block *sb;
+	struct jffs2_sb_info *ctx;
+	int ret;
+
+	fsdev = dev_to_fs_device(dev);
+	sb = &fsdev->sb;
+
+	ret = fsdev_open_cdev(fsdev);
+	if (ret)
+		goto err_out;
+
+	ctx = kzalloc(sizeof(struct jffs2_sb_info), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->mtd = fsdev->cdev->mtd;
+
+	sb->s_fs_info = ctx;
+
+        ret = jffs2_compressors_init();
+        if (ret) {
+		pr_err("error: Failed to initialise compressors\n");
+		goto err_out;
+        }
+
+        ret = jffs2_create_slab_caches();
+        if (ret) {
+		pr_err("error: Failed to initialise slab caches\n");
+		goto err_compressors;
+        }
+
+        if (jffs2_fill_super(fsdev, 0)) {
+		dev_err(dev, "no valid jffs2 found\n");
+		ret = -EINVAL;
+		goto err_slab;
+	}
+
+	return 0;
+
+err_slab:
+        jffs2_destroy_slab_caches();
+err_compressors:
+	jffs2_compressors_exit();
+err_out:
+
+	return ret;
+}
+
+static void jffs2_remove(struct device_d *dev)
+{
+	struct fs_device_d *fsdev;
+	struct super_block *sb;
+
+	fsdev = dev_to_fs_device(dev);
+	sb = &fsdev->sb;
+
+	jffs2_destroy_slab_caches();
+	jffs2_compressors_exit();
+
+	jffs2_put_super(sb);
+}
+
+
+static struct fs_driver_d jffs2_driver = {
+	.open = jffs2_open,
+	.close = jffs2_close,
+	.read = jffs2_read,
+	.type = filetype_jffs2,
+	.flags     = 0,
+	.drv = {
+		.probe  = jffs2_probe,
+		.remove = jffs2_remove,
+		.name = "jffs2",
+	}
+};
+
+static int jffs2_init(void)
+{
+	return register_fs_driver(&jffs2_driver);
+}
+coredevice_initcall(jffs2_init);
diff --git a/fs/jffs2/jffs2_fs_i.h b/fs/jffs2/jffs2_fs_i.h
new file mode 100644
index 0000000000..2d4b03040f
--- /dev/null
+++ b/fs/jffs2/jffs2_fs_i.h
@@ -0,0 +1,55 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef _JFFS2_FS_I
+#define _JFFS2_FS_I
+
+#include <linux/rbtree.h>
+#include <linux/mutex.h>
+
+struct jffs2_inode_info {
+	/* We need an internal mutex similar to inode->i_mutex.
+	   Unfortunately, we can't used the existing one, because
+	   either the GC would deadlock, or we'd have to release it
+	   before letting GC proceed. Or we'd have to put ugliness
+	   into the GC code so it didn't attempt to obtain the i_mutex
+	   for the inode(s) which are already locked */
+	struct mutex sem;
+
+	/* The highest (datanode) version number used for this ino */
+	uint32_t highest_version;
+
+	/* List of data fragments which make up the file */
+	struct rb_root fragtree;
+
+	/* There may be one datanode which isn't referenced by any of the
+	   above fragments, if it contains a metadata update but no actual
+	   data - or if this is a directory inode */
+	/* This also holds the _only_ dnode for symlinks/device nodes,
+	   etc. */
+	struct jffs2_full_dnode *metadata;
+
+	/* Directory entries */
+	struct jffs2_full_dirent *dents;
+
+	/* The target path if this is the inode of a symlink */
+	unsigned char *target;
+
+	/* Some stuff we just have to keep in-core at all times, for each inode. */
+	struct jffs2_inode_cache *inocache;
+
+	uint16_t flags;
+	uint8_t usercompr;
+	struct inode vfs_inode;
+};
+
+#endif /* _JFFS2_FS_I */
diff --git a/fs/jffs2/jffs2_fs_sb.h b/fs/jffs2/jffs2_fs_sb.h
new file mode 100644
index 0000000000..84d118c2e9
--- /dev/null
+++ b/fs/jffs2/jffs2_fs_sb.h
@@ -0,0 +1,160 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef _JFFS2_FS_SB
+#define _JFFS2_FS_SB
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+//#include <linux/workqueue.h>
+//#include <linux/completion.h>
+#include <linux/mutex.h>
+//#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/list.h>
+#include <linux/rwsem.h>
+
+#define JFFS2_SB_FLAG_RO 1
+#define JFFS2_SB_FLAG_SCANNING 2 /* Flash scanning is in progress */
+#define JFFS2_SB_FLAG_BUILDING 4 /* File system building is in progress */
+
+struct jffs2_inodirty;
+
+struct jffs2_mount_opts {
+	bool override_compr;
+	unsigned int compr;
+
+	/* The size of the reserved pool. The reserved pool is the JFFS2 flash
+	 * space which may only be used by root cannot be used by the other
+	 * users. This is implemented simply by means of not allowing the
+	 * latter users to write to the file system if the amount if the
+	 * available space is less then 'rp_size'. */
+	unsigned int rp_size;
+};
+
+/* A struct for the overall file system control.  Pointers to
+   jffs2_sb_info structs are named `c' in the source code.
+   Nee jffs_control
+*/
+struct jffs2_sb_info {
+	struct mtd_info *mtd;
+
+	uint32_t highest_ino;
+	uint32_t check_ino;		/* *NEXT* inode to be checked */
+
+	unsigned int flags;
+
+	struct task_struct *gc_task;	/* GC task struct */
+
+	struct mutex alloc_sem;		/* Used to protect all the following
+					   fields, and also to protect against
+					   out-of-order writing of nodes. And GC. */
+	uint32_t cleanmarker_size;	/* Size of an _inline_ CLEANMARKER
+					 (i.e. zero for OOB CLEANMARKER */
+
+	uint32_t flash_size;
+	uint32_t used_size;
+	uint32_t dirty_size;
+	uint32_t wasted_size;
+	uint32_t free_size;
+	uint32_t erasing_size;
+	uint32_t bad_size;
+	uint32_t sector_size;
+	uint32_t unchecked_size;
+
+	uint32_t nr_free_blocks;
+	uint32_t nr_erasing_blocks;
+
+	/* Number of free blocks there must be before we... */
+	uint8_t resv_blocks_write;	/* ... allow a normal filesystem write */
+	uint8_t resv_blocks_deletion;	/* ... allow a normal filesystem deletion */
+	uint8_t resv_blocks_gctrigger;	/* ... wake up the GC thread */
+	uint8_t resv_blocks_gcbad;	/* ... pick a block from the bad_list to GC */
+	uint8_t resv_blocks_gcmerge;	/* ... merge pages when garbage collecting */
+	/* Number of 'very dirty' blocks before we trigger immediate GC */
+	uint8_t vdirty_blocks_gctrigger;
+
+	uint32_t nospc_dirty_size;
+
+	uint32_t nr_blocks;
+	struct jffs2_eraseblock *blocks;	/* The whole array of blocks. Used for getting blocks
+						 * from the offset (blocks[ofs / sector_size]) */
+	struct jffs2_eraseblock *nextblock;	/* The block we're currently filling */
+
+	struct jffs2_eraseblock *gcblock;	/* The block we're currently garbage-collecting */
+
+	struct list_head clean_list;		/* Blocks 100% full of clean data */
+	struct list_head very_dirty_list;	/* Blocks with lots of dirty space */
+	struct list_head dirty_list;		/* Blocks with some dirty space */
+	struct list_head erasable_list;		/* Blocks which are completely dirty, and need erasing */
+	struct list_head erasable_pending_wbuf_list;	/* Blocks which need erasing but only after the current wbuf is flushed */
+	struct list_head erasing_list;		/* Blocks which are currently erasing */
+	struct list_head erase_checking_list;	/* Blocks which are being checked and marked */
+	struct list_head erase_pending_list;	/* Blocks which need erasing now */
+	struct list_head erase_complete_list;	/* Blocks which are erased and need the clean marker written to them */
+	struct list_head free_list;		/* Blocks which are free and ready to be used */
+	struct list_head bad_list;		/* Bad blocks. */
+	struct list_head bad_used_list;		/* Bad blocks with valid data in. */
+
+	spinlock_t erase_completion_lock;	/* Protect free_list and erasing_list
+						   against erase completion handler */
+	wait_queue_head_t erase_wait;		/* For waiting for erases to complete */
+
+	wait_queue_head_t inocache_wq;
+	int inocache_hashsize;
+	struct jffs2_inode_cache **inocache_list;
+	spinlock_t inocache_lock;
+
+	/* Sem to allow jffs2_garbage_collect_deletion_dirent to
+	   drop the erase_completion_lock while it's holding a pointer
+	   to an obsoleted node. I don't like this. Alternatives welcomed. */
+	struct mutex erase_free_sem;
+
+	uint32_t wbuf_pagesize; /* 0 for NOR and other flashes with no wbuf */
+
+#ifdef CONFIG_JFFS2_FS_WBUF_VERIFY
+	unsigned char *wbuf_verify; /* read-back buffer for verification */
+#endif
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+	unsigned char *wbuf; /* Write-behind buffer for NAND flash */
+	uint32_t wbuf_ofs;
+	uint32_t wbuf_len;
+	struct jffs2_inodirty *wbuf_inodes;
+	struct rw_semaphore wbuf_sem;	/* Protects the write buffer */
+
+	struct delayed_work wbuf_dwork; /* write-buffer write-out work */
+
+	unsigned char *oobbuf;
+	int oobavail; /* How many bytes are available for JFFS2 in OOB */
+#endif
+
+	struct jffs2_summary *summary;		/* Summary information */
+	struct jffs2_mount_opts mount_opts;
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+#define XATTRINDEX_HASHSIZE	(57)
+	uint32_t highest_xid;
+	uint32_t highest_xseqno;
+	struct list_head xattrindex[XATTRINDEX_HASHSIZE];
+	struct list_head xattr_unchecked;
+	struct list_head xattr_dead_list;
+	struct jffs2_xattr_ref *xref_dead_list;
+	struct jffs2_xattr_ref *xref_temp;
+	struct rw_semaphore xattr_sem;
+	uint32_t xdatum_mem_usage;
+	uint32_t xdatum_mem_threshold;
+#endif
+	/* OS-private pointer for getting back to master superblock info */
+	void *os_priv;
+};
+
+#endif /* _JFFS2_FS_SB */
diff --git a/fs/jffs2/malloc.c b/fs/jffs2/malloc.c
new file mode 100644
index 0000000000..b7afc68cea
--- /dev/null
+++ b/fs/jffs2/malloc.c
@@ -0,0 +1,315 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <common.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/jffs2.h>
+#include "nodelist.h"
+
+/* These are initialised to NULL in the kernel startup code.
+   If you're porting to other operating systems, beware */
+static struct kmem_cache *full_dnode_slab;
+static struct kmem_cache *raw_dirent_slab;
+static struct kmem_cache *raw_inode_slab;
+static struct kmem_cache *tmp_dnode_info_slab;
+static struct kmem_cache *raw_node_ref_slab;
+static struct kmem_cache *node_frag_slab;
+static struct kmem_cache *inode_cache_slab;
+#ifdef CONFIG_JFFS2_FS_XATTR
+static struct kmem_cache *xattr_datum_cache;
+static struct kmem_cache *xattr_ref_cache;
+#endif
+
+int __init jffs2_create_slab_caches(void)
+{
+	full_dnode_slab = kmem_cache_create("jffs2_full_dnode",
+					    sizeof(struct jffs2_full_dnode),
+					    0, 0, NULL);
+	if (!full_dnode_slab)
+		goto err;
+
+	raw_dirent_slab = kmem_cache_create("jffs2_raw_dirent",
+					    sizeof(struct jffs2_raw_dirent),
+					    0, SLAB_HWCACHE_ALIGN, NULL);
+	if (!raw_dirent_slab)
+		goto err;
+
+	raw_inode_slab = kmem_cache_create("jffs2_raw_inode",
+					   sizeof(struct jffs2_raw_inode),
+					   0, SLAB_HWCACHE_ALIGN, NULL);
+	if (!raw_inode_slab)
+		goto err;
+
+	tmp_dnode_info_slab = kmem_cache_create("jffs2_tmp_dnode",
+						sizeof(struct jffs2_tmp_dnode_info),
+						0, 0, NULL);
+	if (!tmp_dnode_info_slab)
+		goto err;
+
+	raw_node_ref_slab = kmem_cache_create("jffs2_refblock",
+					      sizeof(struct jffs2_raw_node_ref) * (REFS_PER_BLOCK + 1),
+					      0, 0, NULL);
+	if (!raw_node_ref_slab)
+		goto err;
+
+	node_frag_slab = kmem_cache_create("jffs2_node_frag",
+					   sizeof(struct jffs2_node_frag),
+					   0, 0, NULL);
+	if (!node_frag_slab)
+		goto err;
+
+	inode_cache_slab = kmem_cache_create("jffs2_inode_cache",
+					     sizeof(struct jffs2_inode_cache),
+					     0, 0, NULL);
+	if (!inode_cache_slab)
+		goto err;
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+	xattr_datum_cache = kmem_cache_create("jffs2_xattr_datum",
+					     sizeof(struct jffs2_xattr_datum),
+					     0, 0, NULL);
+	if (!xattr_datum_cache)
+		goto err;
+
+	xattr_ref_cache = kmem_cache_create("jffs2_xattr_ref",
+					   sizeof(struct jffs2_xattr_ref),
+					   0, 0, NULL);
+	if (!xattr_ref_cache)
+		goto err;
+#endif
+
+	return 0;
+ err:
+	jffs2_destroy_slab_caches();
+	return -ENOMEM;
+}
+
+void jffs2_destroy_slab_caches(void)
+{
+	kmem_cache_destroy(full_dnode_slab);
+	kmem_cache_destroy(raw_dirent_slab);
+	kmem_cache_destroy(raw_inode_slab);
+	kmem_cache_destroy(tmp_dnode_info_slab);
+	kmem_cache_destroy(raw_node_ref_slab);
+	kmem_cache_destroy(node_frag_slab);
+	kmem_cache_destroy(inode_cache_slab);
+#ifdef CONFIG_JFFS2_FS_XATTR
+	kmem_cache_destroy(xattr_datum_cache);
+	kmem_cache_destroy(xattr_ref_cache);
+#endif
+}
+
+struct jffs2_full_dirent *jffs2_alloc_full_dirent(int namesize)
+{
+	struct jffs2_full_dirent *ret;
+	ret = kmalloc(sizeof(struct jffs2_full_dirent) + namesize, GFP_KERNEL);
+	dbg_memalloc("%p\n", ret);
+	return ret;
+}
+
+void jffs2_free_full_dirent(struct jffs2_full_dirent *x)
+{
+	dbg_memalloc("%p\n", x);
+	kfree(x);
+}
+
+struct jffs2_full_dnode *jffs2_alloc_full_dnode(void)
+{
+	struct jffs2_full_dnode *ret;
+	ret = kmem_cache_alloc(full_dnode_slab, GFP_KERNEL);
+	dbg_memalloc("%p\n", ret);
+	return ret;
+}
+
+void jffs2_free_full_dnode(struct jffs2_full_dnode *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(full_dnode_slab, x);
+}
+
+struct jffs2_raw_dirent *jffs2_alloc_raw_dirent(void)
+{
+	struct jffs2_raw_dirent *ret;
+	ret = kmem_cache_alloc(raw_dirent_slab, GFP_KERNEL);
+	dbg_memalloc("%p\n", ret);
+	return ret;
+}
+
+void jffs2_free_raw_dirent(struct jffs2_raw_dirent *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(raw_dirent_slab, x);
+}
+
+struct jffs2_raw_inode *jffs2_alloc_raw_inode(void)
+{
+	struct jffs2_raw_inode *ret;
+	ret = kmem_cache_alloc(raw_inode_slab, GFP_KERNEL);
+	dbg_memalloc("%p\n", ret);
+	return ret;
+}
+
+void jffs2_free_raw_inode(struct jffs2_raw_inode *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(raw_inode_slab, x);
+}
+
+struct jffs2_tmp_dnode_info *jffs2_alloc_tmp_dnode_info(void)
+{
+	struct jffs2_tmp_dnode_info *ret;
+	ret = kmem_cache_alloc(tmp_dnode_info_slab, GFP_KERNEL);
+	dbg_memalloc("%p\n",
+		ret);
+	return ret;
+}
+
+void jffs2_free_tmp_dnode_info(struct jffs2_tmp_dnode_info *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(tmp_dnode_info_slab, x);
+}
+
+static struct jffs2_raw_node_ref *jffs2_alloc_refblock(void)
+{
+	struct jffs2_raw_node_ref *ret;
+
+	ret = kmem_cache_alloc(raw_node_ref_slab, GFP_KERNEL);
+	if (ret) {
+		int i = 0;
+		for (i=0; i < REFS_PER_BLOCK; i++) {
+			ret[i].flash_offset = REF_EMPTY_NODE;
+			ret[i].next_in_ino = NULL;
+		}
+		ret[i].flash_offset = REF_LINK_NODE;
+		ret[i].next_in_ino = NULL;
+	}
+	return ret;
+}
+
+int jffs2_prealloc_raw_node_refs(struct jffs2_sb_info *c,
+				 struct jffs2_eraseblock *jeb, int nr)
+{
+	struct jffs2_raw_node_ref **p, *ref;
+	int i = nr;
+
+	dbg_memalloc("%d\n", nr);
+
+	p = &jeb->last_node;
+	ref = *p;
+
+	dbg_memalloc("Reserving %d refs for block @0x%08x\n", nr, jeb->offset);
+
+	/* If jeb->last_node is really a valid node then skip over it */
+	if (ref && ref->flash_offset != REF_EMPTY_NODE)
+		ref++;
+
+	while (i) {
+		if (!ref) {
+			dbg_memalloc("Allocating new refblock linked from %p\n", p);
+			ref = *p = jffs2_alloc_refblock();
+			if (!ref)
+				return -ENOMEM;
+		}
+		if (ref->flash_offset == REF_LINK_NODE) {
+			p = &ref->next_in_ino;
+			ref = *p;
+			continue;
+		}
+		i--;
+		ref++;
+	}
+	jeb->allocated_refs = nr;
+
+	dbg_memalloc("Reserved %d refs for block @0x%08x, last_node is %p (%08x,%p)\n",
+		  nr, jeb->offset, jeb->last_node, jeb->last_node->flash_offset,
+		  jeb->last_node->next_in_ino);
+
+	return 0;
+}
+
+void jffs2_free_refblock(struct jffs2_raw_node_ref *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(raw_node_ref_slab, x);
+}
+
+struct jffs2_node_frag *jffs2_alloc_node_frag(void)
+{
+	struct jffs2_node_frag *ret;
+	ret = kmem_cache_alloc(node_frag_slab, GFP_KERNEL);
+	dbg_memalloc("%p\n", ret);
+	return ret;
+}
+
+void jffs2_free_node_frag(struct jffs2_node_frag *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(node_frag_slab, x);
+}
+
+struct jffs2_inode_cache *jffs2_alloc_inode_cache(void)
+{
+	struct jffs2_inode_cache *ret;
+	ret = kmem_cache_alloc(inode_cache_slab, GFP_KERNEL);
+	dbg_memalloc("%p\n", ret);
+	return ret;
+}
+
+void jffs2_free_inode_cache(struct jffs2_inode_cache *x)
+{
+	dbg_memalloc("%p\n", x);
+	kmem_cache_free(inode_cache_slab, x);
+}
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+struct jffs2_xattr_datum *jffs2_alloc_xattr_datum(void)
+{
+	struct jffs2_xattr_datum *xd;
+	xd = kmem_cache_zalloc(xattr_datum_cache, GFP_KERNEL);
+	dbg_memalloc("%p\n", xd);
+	if (!xd)
+		return NULL;
+
+	xd->class = RAWNODE_CLASS_XATTR_DATUM;
+	xd->node = (void *)xd;
+	INIT_LIST_HEAD(&xd->xindex);
+	return xd;
+}
+
+void jffs2_free_xattr_datum(struct jffs2_xattr_datum *xd)
+{
+	dbg_memalloc("%p\n", xd);
+	kmem_cache_free(xattr_datum_cache, xd);
+}
+
+struct jffs2_xattr_ref *jffs2_alloc_xattr_ref(void)
+{
+	struct jffs2_xattr_ref *ref;
+	ref = kmem_cache_zalloc(xattr_ref_cache, GFP_KERNEL);
+	dbg_memalloc("%p\n", ref);
+	if (!ref)
+		return NULL;
+
+	ref->class = RAWNODE_CLASS_XATTR_REF;
+	ref->node = (void *)ref;
+	return ref;
+}
+
+void jffs2_free_xattr_ref(struct jffs2_xattr_ref *ref)
+{
+	dbg_memalloc("%p\n", ref);
+	kmem_cache_free(xattr_ref_cache, ref);
+}
+#endif
diff --git a/fs/jffs2/nodelist.c b/fs/jffs2/nodelist.c
new file mode 100644
index 0000000000..446407e138
--- /dev/null
+++ b/fs/jffs2/nodelist.c
@@ -0,0 +1,915 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <common.h>
+#include <crc.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/mtd/mtd.h>
+#include <linux/rbtree.h>
+#include <linux/pagemap.h>
+#include "nodelist.h"
+
+static void jffs2_obsolete_node_frag(struct jffs2_sb_info *c,
+				     struct jffs2_node_frag *this);
+
+static inline int on_list(struct list_head *obj, struct list_head *head)
+{
+        struct list_head *this;
+
+        list_for_each(this, head) {
+                if (this == obj) {
+                        jffs2_dbg(1, "%p is on list at %p\n", obj, head);
+                        return 1;
+
+                }
+        }
+        return 0;
+}
+
+void jffs2_mark_node_obsolete(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref)
+{
+	struct jffs2_eraseblock *jeb;
+	int blocknr;
+	int addedsize;
+	uint32_t freed_len;
+
+	if(unlikely(!ref)) {
+		pr_notice("EEEEEK. jffs2_mark_node_obsolete called with NULL node\n");
+		return;
+	}
+	if (ref_obsolete(ref)) {
+		jffs2_dbg(1, "%s(): called with already obsolete node at 0x%08x\n",
+			  __func__, ref_offset(ref));
+		return;
+	}
+	blocknr = ref->flash_offset / c->sector_size;
+	if (blocknr >= c->nr_blocks) {
+		pr_notice("raw node at 0x%08x is off the end of device!\n",
+			  ref->flash_offset);
+		BUG();
+	}
+	jeb = &c->blocks[blocknr];
+
+	spin_lock(&c->erase_completion_lock);
+
+	freed_len = ref_totlen(c, jeb, ref);
+
+	if (ref_flags(ref) == REF_UNCHECKED) {
+		D1(if (unlikely(jeb->unchecked_size < freed_len)) {
+				pr_notice("raw unchecked node of size 0x%08x freed from erase block %d at 0x%08x, but unchecked_size was already 0x%08x\n",
+					  freed_len, blocknr,
+					  ref->flash_offset, jeb->used_size);
+			BUG();
+		})
+			jffs2_dbg(1, "Obsoleting previously unchecked node at 0x%08x of len %x\n",
+				  ref_offset(ref), freed_len);
+		jeb->unchecked_size -= freed_len;
+		c->unchecked_size -= freed_len;
+	} else {
+		D1(if (unlikely(jeb->used_size < freed_len)) {
+				pr_notice("raw node of size 0x%08x freed from erase block %d at 0x%08x, but used_size was already 0x%08x\n",
+					  freed_len, blocknr,
+					  ref->flash_offset, jeb->used_size);
+			BUG();
+		})
+			jffs2_dbg(1, "Obsoleting node at 0x%08x of len %#x: ",
+				  ref_offset(ref), freed_len);
+		jeb->used_size -= freed_len;
+		c->used_size -= freed_len;
+	}
+
+	// Take care, that wasted size is taken into concern
+	if ((jeb->dirty_size || ISDIRTY(jeb->wasted_size + freed_len)) && jeb != c->nextblock) {
+		jffs2_dbg(1, "Dirtying\n");
+		addedsize = freed_len;
+		jeb->dirty_size += freed_len;
+		c->dirty_size += freed_len;
+
+		/* Convert wasted space to dirty, if not a bad block */
+		if (jeb->wasted_size) {
+			if (on_list(&jeb->list, &c->bad_used_list)) {
+				jffs2_dbg(1, "Leaving block at %08x on the bad_used_list\n",
+					  jeb->offset);
+				addedsize = 0; /* To fool the refiling code later */
+			} else {
+				jffs2_dbg(1, "Converting %d bytes of wasted space to dirty in block at %08x\n",
+					  jeb->wasted_size, jeb->offset);
+				addedsize += jeb->wasted_size;
+				jeb->dirty_size += jeb->wasted_size;
+				c->dirty_size += jeb->wasted_size;
+				c->wasted_size -= jeb->wasted_size;
+				jeb->wasted_size = 0;
+			}
+		}
+	} else {
+		jffs2_dbg(1, "Wasting\n");
+		addedsize = 0;
+		jeb->wasted_size += freed_len;
+		c->wasted_size += freed_len;
+	}
+	ref->flash_offset = ref_offset(ref) | REF_OBSOLETE;
+
+	jffs2_dbg_acct_sanity_check_nolock(c, jeb);
+	jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
+
+	if (c->flags & JFFS2_SB_FLAG_SCANNING) {
+		/* Flash scanning is in progress. Don't muck about with the block
+		   lists because they're not ready yet, and don't actually
+		   obliterate nodes that look obsolete. If they weren't
+		   marked obsolete on the flash at the time they _became_
+		   obsolete, there was probably a reason for that. */
+		spin_unlock(&c->erase_completion_lock);
+		/* We didn't lock the erase_free_sem */
+		return;
+	}
+
+	if (jeb == c->nextblock) {
+		jffs2_dbg(2, "Not moving nextblock 0x%08x to dirty/erase_pending list\n",
+			  jeb->offset);
+	} else if (!jeb->used_size && !jeb->unchecked_size) {
+		if (jeb == c->gcblock) {
+			jffs2_dbg(1, "gcblock at 0x%08x completely dirtied. Clearing gcblock...\n",
+				  jeb->offset);
+			c->gcblock = NULL;
+		} else {
+			jffs2_dbg(1, "Eraseblock at 0x%08x completely dirtied. Removing from (dirty?) list...\n",
+				  jeb->offset);
+			list_del(&jeb->list);
+		}
+		if (jffs2_wbuf_dirty(c)) {
+			jffs2_dbg(1, "...and adding to erasable_pending_wbuf_list\n");
+			list_add_tail(&jeb->list, &c->erasable_pending_wbuf_list);
+		} else {
+			jffs2_dbg(1, "...and adding to erase_pending_list\n");
+			list_add_tail(&jeb->list, &c->erase_pending_list);
+			c->nr_erasing_blocks++;
+		}
+		jffs2_dbg(1, "Done OK\n");
+	} else if (jeb == c->gcblock) {
+		jffs2_dbg(2, "Not moving gcblock 0x%08x to dirty_list\n",
+			  jeb->offset);
+	} else if (ISDIRTY(jeb->dirty_size) && !ISDIRTY(jeb->dirty_size - addedsize)) {
+		jffs2_dbg(1, "Eraseblock at 0x%08x is freshly dirtied. Removing from clean list...\n",
+			  jeb->offset);
+		list_del(&jeb->list);
+		jffs2_dbg(1, "...and adding to dirty_list\n");
+		list_add_tail(&jeb->list, &c->dirty_list);
+	} else if (VERYDIRTY(c, jeb->dirty_size) &&
+		   !VERYDIRTY(c, jeb->dirty_size - addedsize)) {
+		jffs2_dbg(1, "Eraseblock at 0x%08x is now very dirty. Removing from dirty list...\n",
+			  jeb->offset);
+		list_del(&jeb->list);
+		jffs2_dbg(1, "...and adding to very_dirty_list\n");
+		list_add_tail(&jeb->list, &c->very_dirty_list);
+	} else {
+		jffs2_dbg(1, "Eraseblock at 0x%08x not moved anywhere. (free 0x%08x, dirty 0x%08x, used 0x%08x)\n",
+			  jeb->offset, jeb->free_size, jeb->dirty_size,
+			  jeb->used_size);
+	}
+
+	spin_unlock(&c->erase_completion_lock);
+
+	return;
+}
+
+void jffs2_add_fd_to_list(struct jffs2_sb_info *c, struct jffs2_full_dirent *new, struct jffs2_full_dirent **list)
+{
+	struct jffs2_full_dirent **prev = list;
+
+	dbg_dentlist("add dirent \"%s\", ino #%u\n", new->name, new->ino);
+
+	while ((*prev) && (*prev)->nhash <= new->nhash) {
+		if ((*prev)->nhash == new->nhash && !strcmp((*prev)->name, new->name)) {
+			/* Duplicate. Free one */
+			if (new->version < (*prev)->version) {
+				dbg_dentlist("Eep! Marking new dirent node obsolete, old is \"%s\", ino #%u\n",
+					(*prev)->name, (*prev)->ino);
+				jffs2_mark_node_obsolete(c, new->raw);
+				jffs2_free_full_dirent(new);
+			} else {
+				dbg_dentlist("marking old dirent \"%s\", ino #%u obsolete\n",
+					(*prev)->name, (*prev)->ino);
+				new->next = (*prev)->next;
+				/* It may have been a 'placeholder' deletion dirent,
+				   if jffs2_can_mark_obsolete() (see jffs2_do_unlink()) */
+				if ((*prev)->raw)
+					jffs2_mark_node_obsolete(c, ((*prev)->raw));
+				jffs2_free_full_dirent(*prev);
+				*prev = new;
+			}
+			return;
+		}
+		prev = &((*prev)->next);
+	}
+	new->next = *prev;
+	*prev = new;
+}
+
+uint32_t jffs2_truncate_fragtree(struct jffs2_sb_info *c, struct rb_root *list, uint32_t size)
+{
+	struct jffs2_node_frag *frag = jffs2_lookup_node_frag(list, size);
+
+	dbg_fragtree("truncating fragtree to 0x%08x bytes\n", size);
+
+	/* We know frag->ofs <= size. That's what lookup does for us */
+	if (frag && frag->ofs != size) {
+		if (frag->ofs+frag->size > size) {
+			frag->size = size - frag->ofs;
+		}
+		frag = frag_next(frag);
+	}
+	while (frag && frag->ofs >= size) {
+		struct jffs2_node_frag *next = frag_next(frag);
+
+		frag_erase(frag, list);
+		jffs2_obsolete_node_frag(c, frag);
+		frag = next;
+	}
+
+	if (size == 0)
+		return 0;
+
+	frag = frag_last(list);
+
+	/* Sanity check for truncation to longer than we started with... */
+	if (!frag)
+		return 0;
+	if (frag->ofs + frag->size < size)
+		return frag->ofs + frag->size;
+
+	/* If the last fragment starts at the RAM page boundary, it is
+	 * REF_PRISTINE irrespective of its size. */
+	if (frag->node && (frag->ofs & (PAGE_SIZE - 1)) == 0) {
+		dbg_fragtree2("marking the last fragment 0x%08x-0x%08x REF_PRISTINE.\n",
+			frag->ofs, frag->ofs + frag->size);
+		frag->node->raw->flash_offset = ref_offset(frag->node->raw) | REF_PRISTINE;
+	}
+	return size;
+}
+
+static void jffs2_obsolete_node_frag(struct jffs2_sb_info *c,
+				     struct jffs2_node_frag *this)
+{
+	if (this->node) {
+		this->node->frags--;
+		if (!this->node->frags) {
+			/* The node has no valid frags left. It's totally obsoleted */
+			dbg_fragtree2("marking old node @0x%08x (0x%04x-0x%04x) obsolete\n",
+				ref_offset(this->node->raw), this->node->ofs, this->node->ofs+this->node->size);
+			jffs2_mark_node_obsolete(c, this->node->raw);
+			jffs2_free_full_dnode(this->node);
+		} else {
+			dbg_fragtree2("marking old node @0x%08x (0x%04x-0x%04x) REF_NORMAL. frags is %d\n",
+				ref_offset(this->node->raw), this->node->ofs, this->node->ofs+this->node->size, this->node->frags);
+			mark_ref_normal(this->node->raw);
+		}
+
+	}
+	jffs2_free_node_frag(this);
+}
+
+static void jffs2_fragtree_insert(struct jffs2_node_frag *newfrag, struct jffs2_node_frag *base)
+{
+	struct rb_node *parent = &base->rb;
+	struct rb_node **link = &parent;
+
+	dbg_fragtree2("insert frag (0x%04x-0x%04x)\n", newfrag->ofs, newfrag->ofs + newfrag->size);
+
+	while (*link) {
+		parent = *link;
+		base = rb_entry(parent, struct jffs2_node_frag, rb);
+
+		if (newfrag->ofs > base->ofs)
+			link = &base->rb.rb_right;
+		else if (newfrag->ofs < base->ofs)
+			link = &base->rb.rb_left;
+		else {
+			JFFS2_ERROR("duplicate frag at %08x (%p,%p)\n", newfrag->ofs, newfrag, base);
+			BUG();
+		}
+	}
+
+	rb_link_node(&newfrag->rb, &base->rb, link);
+}
+
+/*
+ * Allocate and initializes a new fragment.
+ */
+static struct jffs2_node_frag * new_fragment(struct jffs2_full_dnode *fn, uint32_t ofs, uint32_t size)
+{
+	struct jffs2_node_frag *newfrag;
+
+	newfrag = jffs2_alloc_node_frag();
+	if (likely(newfrag)) {
+		newfrag->ofs = ofs;
+		newfrag->size = size;
+		newfrag->node = fn;
+	} else {
+		JFFS2_ERROR("cannot allocate a jffs2_node_frag object\n");
+	}
+
+	return newfrag;
+}
+
+/*
+ * Called when there is no overlapping fragment exist. Inserts a hole before the new
+ * fragment and inserts the new fragment to the fragtree.
+ */
+static int no_overlapping_node(struct jffs2_sb_info *c, struct rb_root *root,
+		 	       struct jffs2_node_frag *newfrag,
+			       struct jffs2_node_frag *this, uint32_t lastend)
+{
+	if (lastend < newfrag->node->ofs) {
+		/* put a hole in before the new fragment */
+		struct jffs2_node_frag *holefrag;
+
+		holefrag= new_fragment(NULL, lastend, newfrag->node->ofs - lastend);
+		if (unlikely(!holefrag)) {
+			jffs2_free_node_frag(newfrag);
+			return -ENOMEM;
+		}
+
+		if (this) {
+			/* By definition, the 'this' node has no right-hand child,
+			   because there are no frags with offset greater than it.
+			   So that's where we want to put the hole */
+			dbg_fragtree2("add hole frag %#04x-%#04x on the right of the new frag.\n",
+				holefrag->ofs, holefrag->ofs + holefrag->size);
+			rb_link_node(&holefrag->rb, &this->rb, &this->rb.rb_right);
+		} else {
+			dbg_fragtree2("Add hole frag %#04x-%#04x to the root of the tree.\n",
+				holefrag->ofs, holefrag->ofs + holefrag->size);
+			rb_link_node(&holefrag->rb, NULL, &root->rb_node);
+		}
+		rb_insert_color(&holefrag->rb, root);
+		this = holefrag;
+	}
+
+	if (this) {
+		/* By definition, the 'this' node has no right-hand child,
+		   because there are no frags with offset greater than it.
+		   So that's where we want to put new fragment */
+		dbg_fragtree2("add the new node at the right\n");
+		rb_link_node(&newfrag->rb, &this->rb, &this->rb.rb_right);
+	} else {
+		dbg_fragtree2("insert the new node at the root of the tree\n");
+		rb_link_node(&newfrag->rb, NULL, &root->rb_node);
+	}
+	rb_insert_color(&newfrag->rb, root);
+
+	return 0;
+}
+
+/* Doesn't set inode->i_size */
+static int jffs2_add_frag_to_fragtree(struct jffs2_sb_info *c, struct rb_root *root, struct jffs2_node_frag *newfrag)
+{
+	struct jffs2_node_frag *this;
+	uint32_t lastend;
+
+	/* Skip all the nodes which are completed before this one starts */
+	this = jffs2_lookup_node_frag(root, newfrag->node->ofs);
+
+	if (this) {
+		dbg_fragtree2("lookup gave frag 0x%04x-0x%04x; phys 0x%08x (*%p)\n",
+			  this->ofs, this->ofs+this->size, this->node?(ref_offset(this->node->raw)):0xffffffff, this);
+		lastend = this->ofs + this->size;
+	} else {
+		dbg_fragtree2("lookup gave no frag\n");
+		lastend = 0;
+	}
+
+	/* See if we ran off the end of the fragtree */
+	if (lastend <= newfrag->ofs) {
+		/* We did */
+
+		/* Check if 'this' node was on the same page as the new node.
+		   If so, both 'this' and the new node get marked REF_NORMAL so
+		   the GC can take a look.
+		*/
+		if (lastend && (lastend-1) >> PAGE_SHIFT == newfrag->ofs >> PAGE_SHIFT) {
+			if (this->node)
+				mark_ref_normal(this->node->raw);
+			mark_ref_normal(newfrag->node->raw);
+		}
+
+		return no_overlapping_node(c, root, newfrag, this, lastend);
+	}
+
+	if (this->node)
+		dbg_fragtree2("dealing with frag %u-%u, phys %#08x(%d).\n",
+		this->ofs, this->ofs + this->size,
+		ref_offset(this->node->raw), ref_flags(this->node->raw));
+	else
+		dbg_fragtree2("dealing with hole frag %u-%u.\n",
+		this->ofs, this->ofs + this->size);
+
+	/* OK. 'this' is pointing at the first frag that newfrag->ofs at least partially obsoletes,
+	 * - i.e. newfrag->ofs < this->ofs+this->size && newfrag->ofs >= this->ofs
+	 */
+	if (newfrag->ofs > this->ofs) {
+		/* This node isn't completely obsoleted. The start of it remains valid */
+
+		/* Mark the new node and the partially covered node REF_NORMAL -- let
+		   the GC take a look at them */
+		mark_ref_normal(newfrag->node->raw);
+		if (this->node)
+			mark_ref_normal(this->node->raw);
+
+		if (this->ofs + this->size > newfrag->ofs + newfrag->size) {
+			/* The new node splits 'this' frag into two */
+			struct jffs2_node_frag *newfrag2;
+
+			if (this->node)
+				dbg_fragtree2("split old frag 0x%04x-0x%04x, phys 0x%08x\n",
+					this->ofs, this->ofs+this->size, ref_offset(this->node->raw));
+			else
+				dbg_fragtree2("split old hole frag 0x%04x-0x%04x\n",
+					this->ofs, this->ofs+this->size);
+
+			/* New second frag pointing to this's node */
+			newfrag2 = new_fragment(this->node, newfrag->ofs + newfrag->size,
+						this->ofs + this->size - newfrag->ofs - newfrag->size);
+			if (unlikely(!newfrag2))
+				return -ENOMEM;
+			if (this->node)
+				this->node->frags++;
+
+			/* Adjust size of original 'this' */
+			this->size = newfrag->ofs - this->ofs;
+
+			/* Now, we know there's no node with offset
+			   greater than this->ofs but smaller than
+			   newfrag2->ofs or newfrag->ofs, for obvious
+			   reasons. So we can do a tree insert from
+			   'this' to insert newfrag, and a tree insert
+			   from newfrag to insert newfrag2. */
+			jffs2_fragtree_insert(newfrag, this);
+			rb_insert_color(&newfrag->rb, root);
+
+			jffs2_fragtree_insert(newfrag2, newfrag);
+			rb_insert_color(&newfrag2->rb, root);
+
+			return 0;
+		}
+		/* New node just reduces 'this' frag in size, doesn't split it */
+		this->size = newfrag->ofs - this->ofs;
+
+		/* Again, we know it lives down here in the tree */
+		jffs2_fragtree_insert(newfrag, this);
+		rb_insert_color(&newfrag->rb, root);
+	} else {
+		/* New frag starts at the same point as 'this' used to. Replace
+		   it in the tree without doing a delete and insertion */
+		dbg_fragtree2("inserting newfrag (*%p),%d-%d in before 'this' (*%p),%d-%d\n",
+			  newfrag, newfrag->ofs, newfrag->ofs+newfrag->size, this, this->ofs, this->ofs+this->size);
+
+		rb_replace_node(&this->rb, &newfrag->rb, root);
+
+		if (newfrag->ofs + newfrag->size >= this->ofs+this->size) {
+			dbg_fragtree2("obsoleting node frag %p (%x-%x)\n", this, this->ofs, this->ofs+this->size);
+			jffs2_obsolete_node_frag(c, this);
+		} else {
+			this->ofs += newfrag->size;
+			this->size -= newfrag->size;
+
+			jffs2_fragtree_insert(this, newfrag);
+			rb_insert_color(&this->rb, root);
+			return 0;
+		}
+	}
+	/* OK, now we have newfrag added in the correct place in the tree, but
+	   frag_next(newfrag) may be a fragment which is overlapped by it
+	*/
+	while ((this = frag_next(newfrag)) && newfrag->ofs + newfrag->size >= this->ofs + this->size) {
+		/* 'this' frag is obsoleted completely. */
+		dbg_fragtree2("obsoleting node frag %p (%x-%x) and removing from tree\n",
+			this, this->ofs, this->ofs+this->size);
+		rb_erase(&this->rb, root);
+		jffs2_obsolete_node_frag(c, this);
+	}
+	/* Now we're pointing at the first frag which isn't totally obsoleted by
+	   the new frag */
+
+	if (!this || newfrag->ofs + newfrag->size == this->ofs)
+		return 0;
+
+	/* Still some overlap but we don't need to move it in the tree */
+	this->size = (this->ofs + this->size) - (newfrag->ofs + newfrag->size);
+	this->ofs = newfrag->ofs + newfrag->size;
+
+	/* And mark them REF_NORMAL so the GC takes a look at them */
+	if (this->node)
+		mark_ref_normal(this->node->raw);
+	mark_ref_normal(newfrag->node->raw);
+
+	return 0;
+}
+
+/*
+ * Given an inode, probably with existing tree of fragments, add the new node
+ * to the fragment tree.
+ */
+int jffs2_add_full_dnode_to_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_full_dnode *fn)
+{
+	int ret;
+	struct jffs2_node_frag *newfrag;
+
+	if (unlikely(!fn->size))
+		return 0;
+
+	newfrag = new_fragment(fn, fn->ofs, fn->size);
+	if (unlikely(!newfrag))
+		return -ENOMEM;
+	newfrag->node->frags = 1;
+
+	dbg_fragtree("adding node %#04x-%#04x @0x%08x on flash, newfrag *%p\n",
+		  fn->ofs, fn->ofs+fn->size, ref_offset(fn->raw), newfrag);
+
+	ret = jffs2_add_frag_to_fragtree(c, &f->fragtree, newfrag);
+	if (unlikely(ret))
+		return ret;
+
+	/* If we now share a page with other nodes, mark either previous
+	   or next node REF_NORMAL, as appropriate.  */
+	if (newfrag->ofs & (PAGE_SIZE-1)) {
+		struct jffs2_node_frag *prev = frag_prev(newfrag);
+
+		mark_ref_normal(fn->raw);
+		/* If we don't start at zero there's _always_ a previous */
+		if (prev->node)
+			mark_ref_normal(prev->node->raw);
+	}
+
+	if ((newfrag->ofs+newfrag->size) & (PAGE_SIZE-1)) {
+		struct jffs2_node_frag *next = frag_next(newfrag);
+
+		if (next) {
+			mark_ref_normal(fn->raw);
+			if (next->node)
+				mark_ref_normal(next->node->raw);
+		}
+	}
+	jffs2_dbg_fragtree_paranoia_check_nolock(f);
+
+	return 0;
+}
+
+void jffs2_set_inocache_state(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic, int state)
+{
+	spin_lock(&c->inocache_lock);
+	ic->state = state;
+	spin_unlock(&c->inocache_lock);
+}
+
+/* During mount, this needs no locking. During normal operation, its
+   callers want to do other stuff while still holding the inocache_lock.
+   Rather than introducing special case get_ino_cache functions or
+   callbacks, we just let the caller do the locking itself. */
+
+struct jffs2_inode_cache *jffs2_get_ino_cache(struct jffs2_sb_info *c, uint32_t ino)
+{
+	struct jffs2_inode_cache *ret;
+
+	ret = c->inocache_list[ino % c->inocache_hashsize];
+	while (ret && ret->ino < ino) {
+		ret = ret->next;
+	}
+
+	if (ret && ret->ino != ino)
+		ret = NULL;
+
+	return ret;
+}
+
+void jffs2_add_ino_cache (struct jffs2_sb_info *c, struct jffs2_inode_cache *new)
+{
+	struct jffs2_inode_cache **prev;
+
+	spin_lock(&c->inocache_lock);
+	if (!new->ino)
+		new->ino = ++c->highest_ino;
+
+	dbg_inocache("add %p (ino #%u)\n", new, new->ino);
+
+	prev = &c->inocache_list[new->ino % c->inocache_hashsize];
+
+	while ((*prev) && (*prev)->ino < new->ino) {
+		prev = &(*prev)->next;
+	}
+	new->next = *prev;
+	*prev = new;
+
+	spin_unlock(&c->inocache_lock);
+}
+
+void jffs2_del_ino_cache(struct jffs2_sb_info *c, struct jffs2_inode_cache *old)
+{
+	struct jffs2_inode_cache **prev;
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+	BUG_ON(old->xref);
+#endif
+	dbg_inocache("del %p (ino #%u)\n", old, old->ino);
+	spin_lock(&c->inocache_lock);
+
+	prev = &c->inocache_list[old->ino % c->inocache_hashsize];
+
+	while ((*prev) && (*prev)->ino < old->ino) {
+		prev = &(*prev)->next;
+	}
+	if ((*prev) == old) {
+		*prev = old->next;
+	}
+
+	/* Free it now unless it's in READING or CLEARING state, which
+	   are the transitions upon read_inode() and clear_inode(). The
+	   rest of the time we know nobody else is looking at it, and
+	   if it's held by read_inode() or clear_inode() they'll free it
+	   for themselves. */
+	if (old->state != INO_STATE_READING && old->state != INO_STATE_CLEARING)
+		jffs2_free_inode_cache(old);
+
+	spin_unlock(&c->inocache_lock);
+}
+
+void jffs2_free_ino_caches(struct jffs2_sb_info *c)
+{
+	int i;
+	struct jffs2_inode_cache *this, *next;
+
+	for (i=0; i < c->inocache_hashsize; i++) {
+		this = c->inocache_list[i];
+		while (this) {
+			next = this->next;
+			jffs2_xattr_free_inode(c, this);
+			jffs2_free_inode_cache(this);
+			this = next;
+		}
+		c->inocache_list[i] = NULL;
+	}
+}
+
+void jffs2_free_raw_node_refs(struct jffs2_sb_info *c)
+{
+	int i;
+	struct jffs2_raw_node_ref *this, *next;
+
+	for (i=0; i<c->nr_blocks; i++) {
+		this = c->blocks[i].first_node;
+		while (this) {
+			if (this[REFS_PER_BLOCK].flash_offset == REF_LINK_NODE)
+				next = this[REFS_PER_BLOCK].next_in_ino;
+			else
+				next = NULL;
+
+			jffs2_free_refblock(this);
+			this = next;
+		}
+		c->blocks[i].first_node = c->blocks[i].last_node = NULL;
+	}
+}
+
+struct jffs2_node_frag *jffs2_lookup_node_frag(struct rb_root *fragtree, uint32_t offset)
+{
+	/* The common case in lookup is that there will be a node
+	   which precisely matches. So we go looking for that first */
+	struct rb_node *next;
+	struct jffs2_node_frag *prev = NULL;
+	struct jffs2_node_frag *frag = NULL;
+
+	dbg_fragtree2("root %p, offset %d\n", fragtree, offset);
+
+	next = fragtree->rb_node;
+
+	while(next) {
+		frag = rb_entry(next, struct jffs2_node_frag, rb);
+
+		if (frag->ofs + frag->size <= offset) {
+			/* Remember the closest smaller match on the way down */
+			if (!prev || frag->ofs > prev->ofs)
+				prev = frag;
+			next = frag->rb.rb_right;
+		} else if (frag->ofs > offset) {
+			next = frag->rb.rb_left;
+		} else {
+			return frag;
+		}
+	}
+
+	/* Exact match not found. Go back up looking at each parent,
+	   and return the closest smaller one */
+
+	if (prev)
+		dbg_fragtree2("no match. Returning frag %#04x-%#04x, closest previous\n",
+			  prev->ofs, prev->ofs+prev->size);
+	else
+		dbg_fragtree2("returning NULL, empty fragtree\n");
+
+	return prev;
+}
+
+/* Pass 'c' argument to indicate that nodes should be marked obsolete as
+   they're killed. */
+void jffs2_kill_fragtree(struct rb_root *root, struct jffs2_sb_info *c)
+{
+	struct jffs2_node_frag *frag, *next;
+
+	dbg_fragtree("killing\n");
+	rbtree_postorder_for_each_entry_safe(frag, next, root, rb) {
+		if (frag->node && !(--frag->node->frags)) {
+			/* Not a hole, and it's the final remaining frag
+			   of this node. Free the node */
+			if (c)
+				jffs2_mark_node_obsolete(c, frag->node->raw);
+
+			jffs2_free_full_dnode(frag->node);
+		}
+
+		jffs2_free_node_frag(frag);
+		cond_resched();
+	}
+}
+
+struct jffs2_raw_node_ref *jffs2_link_node_ref(struct jffs2_sb_info *c,
+					       struct jffs2_eraseblock *jeb,
+					       uint32_t ofs, uint32_t len,
+					       struct jffs2_inode_cache *ic)
+{
+	struct jffs2_raw_node_ref *ref;
+
+	BUG_ON(!jeb->allocated_refs);
+	jeb->allocated_refs--;
+
+	ref = jeb->last_node;
+
+	dbg_noderef("Last node at %p is (%08x,%p)\n", ref, ref->flash_offset,
+		    ref->next_in_ino);
+
+	while (ref->flash_offset != REF_EMPTY_NODE) {
+		if (ref->flash_offset == REF_LINK_NODE)
+			ref = ref->next_in_ino;
+		else
+			ref++;
+	}
+
+	dbg_noderef("New ref is %p (%08x becomes %08x,%p) len 0x%x\n", ref,
+		    ref->flash_offset, ofs, ref->next_in_ino, len);
+
+	ref->flash_offset = ofs;
+
+	if (!jeb->first_node) {
+		jeb->first_node = ref;
+		BUG_ON(ref_offset(ref) != jeb->offset);
+	} else if (unlikely(ref_offset(ref) != jeb->offset + c->sector_size - jeb->free_size)) {
+		uint32_t last_len = ref_totlen(c, jeb, jeb->last_node);
+
+		JFFS2_ERROR("Adding new ref %p at (0x%08x-0x%08x) not immediately after previous (0x%08x-0x%08x)\n",
+			    ref, ref_offset(ref), ref_offset(ref)+len,
+			    ref_offset(jeb->last_node),
+			    ref_offset(jeb->last_node)+last_len);
+		BUG();
+	}
+	jeb->last_node = ref;
+
+	if (ic) {
+		ref->next_in_ino = ic->nodes;
+		ic->nodes = ref;
+	} else {
+		ref->next_in_ino = NULL;
+	}
+
+	switch(ref_flags(ref)) {
+	case REF_UNCHECKED:
+		c->unchecked_size += len;
+		jeb->unchecked_size += len;
+		break;
+
+	case REF_NORMAL:
+	case REF_PRISTINE:
+		c->used_size += len;
+		jeb->used_size += len;
+		break;
+
+	case REF_OBSOLETE:
+		c->dirty_size += len;
+		jeb->dirty_size += len;
+		break;
+	}
+	c->free_size -= len;
+	jeb->free_size -= len;
+
+#ifdef TEST_TOTLEN
+	/* Set (and test) __totlen field... for now */
+	ref->__totlen = len;
+	ref_totlen(c, jeb, ref);
+#endif
+	return ref;
+}
+
+/* No locking, no reservation of 'ref'. Do not use on a live file system */
+int jffs2_scan_dirty_space(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+			   uint32_t size)
+{
+	if (!size)
+		return 0;
+	if (unlikely(size > jeb->free_size)) {
+		pr_crit("Dirty space 0x%x larger then free_size 0x%x (wasted 0x%x)\n",
+			size, jeb->free_size, jeb->wasted_size);
+		BUG();
+	}
+	/* REF_EMPTY_NODE is !obsolete, so that works OK */
+	if (jeb->last_node && ref_obsolete(jeb->last_node)) {
+#ifdef TEST_TOTLEN
+		jeb->last_node->__totlen += size;
+#endif
+		c->dirty_size += size;
+		c->free_size -= size;
+		jeb->dirty_size += size;
+		jeb->free_size -= size;
+	} else {
+		uint32_t ofs = jeb->offset + c->sector_size - jeb->free_size;
+		ofs |= REF_OBSOLETE;
+
+		jffs2_link_node_ref(c, jeb, ofs, size, NULL);
+	}
+
+	return 0;
+}
+
+/* Calculate totlen from surrounding nodes or eraseblock */
+static inline uint32_t __ref_totlen(struct jffs2_sb_info *c,
+				    struct jffs2_eraseblock *jeb,
+				    struct jffs2_raw_node_ref *ref)
+{
+	uint32_t ref_end;
+	struct jffs2_raw_node_ref *next_ref = ref_next(ref);
+
+	if (next_ref)
+		ref_end = ref_offset(next_ref);
+	else {
+		if (!jeb)
+			jeb = &c->blocks[ref->flash_offset / c->sector_size];
+
+		/* Last node in block. Use free_space */
+		if (unlikely(ref != jeb->last_node)) {
+			pr_crit("ref %p @0x%08x is not jeb->last_node (%p @0x%08x)\n",
+				ref, ref_offset(ref), jeb->last_node,
+				jeb->last_node ?
+				ref_offset(jeb->last_node) : 0);
+			BUG();
+		}
+		ref_end = jeb->offset + c->sector_size - jeb->free_size;
+	}
+	return ref_end - ref_offset(ref);
+}
+
+uint32_t __jffs2_ref_totlen(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+			    struct jffs2_raw_node_ref *ref)
+{
+	uint32_t ret;
+
+	ret = __ref_totlen(c, jeb, ref);
+
+#ifdef TEST_TOTLEN
+	if (unlikely(ret != ref->__totlen)) {
+		if (!jeb)
+			jeb = &c->blocks[ref->flash_offset / c->sector_size];
+
+		pr_crit("Totlen for ref at %p (0x%08x-0x%08x) miscalculated as 0x%x instead of %x\n",
+			ref, ref_offset(ref), ref_offset(ref) + ref->__totlen,
+			ret, ref->__totlen);
+		if (ref_next(ref)) {
+			pr_crit("next %p (0x%08x-0x%08x)\n",
+				ref_next(ref), ref_offset(ref_next(ref)),
+				ref_offset(ref_next(ref)) + ref->__totlen);
+		} else
+			pr_crit("No next ref. jeb->last_node is %p\n",
+				jeb->last_node);
+
+		pr_crit("jeb->wasted_size %x, dirty_size %x, used_size %x, free_size %x\n",
+			jeb->wasted_size, jeb->dirty_size, jeb->used_size,
+			jeb->free_size);
+
+#if defined(JFFS2_DBG_DUMPS) || defined(JFFS2_DBG_PARANOIA_CHECKS)
+		__jffs2_dbg_dump_node_refs_nolock(c, jeb);
+#endif
+
+		WARN_ON(1);
+
+		ret = ref->__totlen;
+	}
+#endif /* TEST_TOTLEN */
+	return ret;
+}
diff --git a/fs/jffs2/nodelist.h b/fs/jffs2/nodelist.h
new file mode 100644
index 0000000000..f78e176e77
--- /dev/null
+++ b/fs/jffs2/nodelist.h
@@ -0,0 +1,506 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef __JFFS2_NODELIST_H__
+#define __JFFS2_NODELIST_H__
+
+#include <common.h>
+#include <linux/fs.h>
+#include <linux/hash.h>
+#include <linux/types.h>
+#include <linux/jffs2.h>
+#include "jffs2_fs_sb.h"
+#include "jffs2_fs_i.h"
+#include "xattr.h"
+#include "acl.h"
+#include "summary.h"
+
+#ifdef __ECOS
+#include "os-ecos.h"
+#else
+#include "os-linux.h"
+#endif
+
+#define JFFS2_NATIVE_ENDIAN
+
+/* Note we handle mode bits conversion from JFFS2 (i.e. Linux) to/from
+   whatever OS we're actually running on here too. */
+
+#if defined(JFFS2_NATIVE_ENDIAN)
+#define cpu_to_je16(x) ((jint16_t){x})
+#define cpu_to_je32(x) ((jint32_t){x})
+#define cpu_to_jemode(x) ((jmode_t){os_to_jffs2_mode(x)})
+
+#define constant_cpu_to_je16(x) ((jint16_t){x})
+#define constant_cpu_to_je32(x) ((jint32_t){x})
+
+#define je16_to_cpu(x) ((x).v16)
+#define je32_to_cpu(x) ((x).v32)
+#define jemode_to_cpu(x) (jffs2_to_os_mode((x).m))
+#elif defined(JFFS2_BIG_ENDIAN)
+#define cpu_to_je16(x) ((jint16_t){cpu_to_be16(x)})
+#define cpu_to_je32(x) ((jint32_t){cpu_to_be32(x)})
+#define cpu_to_jemode(x) ((jmode_t){cpu_to_be32(os_to_jffs2_mode(x))})
+
+#define constant_cpu_to_je16(x) ((jint16_t){__constant_cpu_to_be16(x)})
+#define constant_cpu_to_je32(x) ((jint32_t){__constant_cpu_to_be32(x)})
+
+#define je16_to_cpu(x) (be16_to_cpu(x.v16))
+#define je32_to_cpu(x) (be32_to_cpu(x.v32))
+#define jemode_to_cpu(x) (be32_to_cpu(jffs2_to_os_mode((x).m)))
+#elif defined(JFFS2_LITTLE_ENDIAN)
+#define cpu_to_je16(x) ((jint16_t){cpu_to_le16(x)})
+#define cpu_to_je32(x) ((jint32_t){cpu_to_le32(x)})
+#define cpu_to_jemode(x) ((jmode_t){cpu_to_le32(os_to_jffs2_mode(x))})
+
+#define constant_cpu_to_je16(x) ((jint16_t){__constant_cpu_to_le16(x)})
+#define constant_cpu_to_je32(x) ((jint32_t){__constant_cpu_to_le32(x)})
+
+#define je16_to_cpu(x) (le16_to_cpu(x.v16))
+#define je32_to_cpu(x) (le32_to_cpu(x.v32))
+#define jemode_to_cpu(x) (le32_to_cpu(jffs2_to_os_mode((x).m)))
+#else
+#error wibble
+#endif
+
+#define crc32(seed, data, length)  crc32_no_comp(seed, (unsigned char const *)data, length)
+
+/* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
+#define init_name_hash(salt)            (unsigned long)(salt)
+
+/* partial hash update function. Assume roughly 4 bits per character */
+static inline unsigned long
+partial_name_hash(unsigned long c, unsigned long prevhash)
+{
+	return (prevhash + (c << 4) + (c >> 4)) * 11;
+}
+
+/*
+ * Finally: cut down the number of bits to a int value (and try to avoid
+ * losing bits).  This also has the property (wanted by the dcache)
+ * that the msbits make a good hash table index.
+ */
+static inline unsigned int end_name_hash(unsigned long hash)
+{
+	return hash_long(hash, 32);
+}
+
+/* Return the hash of a string of known length */
+static inline unsigned int full_name_hash(const void *salt, const char *name, unsigned int len)
+{
+	unsigned long hash = init_name_hash(salt);
+	while (len--)
+		hash = partial_name_hash((unsigned char)*name++, hash);
+	return end_name_hash(hash);
+}
+
+/* The minimal node header size */
+#define JFFS2_MIN_NODE_HEADER sizeof(struct jffs2_raw_dirent)
+
+/*
+  This is all we need to keep in-core for each raw node during normal
+  operation. As and when we do read_inode on a particular inode, we can
+  scan the nodes which are listed for it and build up a proper map of
+  which nodes are currently valid. JFFSv1 always used to keep that whole
+  map in core for each inode.
+*/
+struct jffs2_raw_node_ref
+{
+	struct jffs2_raw_node_ref *next_in_ino; /* Points to the next raw_node_ref
+		for this object. If this _is_ the last, it points to the inode_cache,
+		xattr_ref or xattr_datum instead. The common part of those structures
+		has NULL in the first word. See jffs2_raw_ref_to_ic() below */
+	uint32_t flash_offset;
+#undef TEST_TOTLEN
+#ifdef TEST_TOTLEN
+	uint32_t __totlen; /* This may die; use ref_totlen(c, jeb, ) below */
+#endif
+};
+
+#define REF_LINK_NODE ((int32_t)-1)
+#define REF_EMPTY_NODE ((int32_t)-2)
+
+/* Use blocks of about 256 bytes */
+#define REFS_PER_BLOCK ((255/sizeof(struct jffs2_raw_node_ref))-1)
+
+static inline struct jffs2_raw_node_ref *ref_next(struct jffs2_raw_node_ref *ref)
+{
+	ref++;
+
+	/* Link to another block of refs */
+	if (ref->flash_offset == REF_LINK_NODE) {
+		ref = ref->next_in_ino;
+		if (!ref)
+			return ref;
+	}
+
+	/* End of chain */
+	if (ref->flash_offset == REF_EMPTY_NODE)
+		return NULL;
+
+	return ref;
+}
+
+static inline struct jffs2_inode_cache *jffs2_raw_ref_to_ic(struct jffs2_raw_node_ref *raw)
+{
+	while(raw->next_in_ino)
+		raw = raw->next_in_ino;
+
+	/* NB. This can be a jffs2_xattr_datum or jffs2_xattr_ref and
+	   not actually a jffs2_inode_cache. Check ->class */
+	return ((struct jffs2_inode_cache *)raw);
+}
+
+	/* flash_offset & 3 always has to be zero, because nodes are
+	   always aligned at 4 bytes. So we have a couple of extra bits
+	   to play with, which indicate the node's status; see below: */
+#define REF_UNCHECKED	0	/* We haven't yet checked the CRC or built its inode */
+#define REF_OBSOLETE	1	/* Obsolete, can be completely ignored */
+#define REF_PRISTINE	2	/* Completely clean. GC without looking */
+#define REF_NORMAL	3	/* Possibly overlapped. Read the page and write again on GC */
+#define ref_flags(ref)		((ref)->flash_offset & 3)
+#define ref_offset(ref)		((ref)->flash_offset & ~3)
+#define ref_obsolete(ref)	(((ref)->flash_offset & 3) == REF_OBSOLETE)
+#define mark_ref_normal(ref)    do { (ref)->flash_offset = ref_offset(ref) | REF_NORMAL; } while(0)
+
+/* Dirent nodes should be REF_PRISTINE only if they are not a deletion
+   dirent. Deletion dirents should be REF_NORMAL so that GC gets to
+   throw them away when appropriate */
+#define dirent_node_state(rd)	( (je32_to_cpu((rd)->ino)?REF_PRISTINE:REF_NORMAL) )
+
+/* NB: REF_PRISTINE for an inode-less node (ref->next_in_ino == NULL) indicates
+   it is an unknown node of type JFFS2_NODETYPE_RWCOMPAT_COPY, so it'll get
+   copied. If you need to do anything different to GC inode-less nodes, then
+   you need to modify gc.c accordingly. */
+
+/* For each inode in the filesystem, we need to keep a record of
+   nlink, because it would be a PITA to scan the whole directory tree
+   at read_inode() time to calculate it, and to keep sufficient information
+   in the raw_node_ref (basically both parent and child inode number for
+   dirent nodes) would take more space than this does. We also keep
+   a pointer to the first physical node which is part of this inode, too.
+*/
+struct jffs2_inode_cache {
+	/* First part of structure is shared with other objects which
+	   can terminate the raw node refs' next_in_ino list -- which
+	   currently struct jffs2_xattr_datum and struct jffs2_xattr_ref. */
+
+	struct jffs2_full_dirent *scan_dents; /* Used during scan to hold
+		temporary lists of dirents, and later must be set to
+		NULL to mark the end of the raw_node_ref->next_in_ino
+		chain. */
+	struct jffs2_raw_node_ref *nodes;
+	uint8_t class;	/* It's used for identification */
+
+	/* end of shared structure */
+
+	uint8_t flags;
+	uint16_t state;
+	uint32_t ino;
+	struct jffs2_inode_cache *next;
+#ifdef CONFIG_JFFS2_FS_XATTR
+	struct jffs2_xattr_ref *xref;
+#endif
+	uint32_t pino_nlink;	/* Directories store parent inode
+				   here; other inodes store nlink.
+				   Zero always means that it's
+				   completely unlinked. */
+};
+
+/* Inode states for 'state' above. We need the 'GC' state to prevent
+   someone from doing a read_inode() while we're moving a 'REF_PRISTINE'
+   node without going through all the iget() nonsense */
+#define INO_STATE_UNCHECKED	0	/* CRC checks not yet done */
+#define INO_STATE_CHECKING	1	/* CRC checks in progress */
+#define INO_STATE_PRESENT	2	/* In core */
+#define INO_STATE_CHECKEDABSENT	3	/* Checked, cleared again */
+#define INO_STATE_GC		4	/* GCing a 'pristine' node */
+#define INO_STATE_READING	5	/* In read_inode() */
+#define INO_STATE_CLEARING	6	/* In clear_inode() */
+
+#define INO_FLAGS_XATTR_CHECKED	0x01	/* has no duplicate xattr_ref */
+#define INO_FLAGS_IS_DIR	0x02	/* is a directory */
+
+#define RAWNODE_CLASS_INODE_CACHE	0
+#define RAWNODE_CLASS_XATTR_DATUM	1
+#define RAWNODE_CLASS_XATTR_REF		2
+
+#define INOCACHE_HASHSIZE_MIN 128
+#define INOCACHE_HASHSIZE_MAX 1024
+
+#define write_ofs(c) ((c)->nextblock->offset + (c)->sector_size - (c)->nextblock->free_size)
+
+/*
+  Larger representation of a raw node, kept in-core only when the
+  struct inode for this particular ino is instantiated.
+*/
+
+struct jffs2_full_dnode
+{
+	struct jffs2_raw_node_ref *raw;
+	uint32_t ofs; /* The offset to which the data of this node belongs */
+	uint32_t size;
+	uint32_t frags; /* Number of fragments which currently refer
+			to this node. When this reaches zero,
+			the node is obsolete.  */
+};
+
+/*
+   Even larger representation of a raw node, kept in-core only while
+   we're actually building up the original map of which nodes go where,
+   in read_inode()
+*/
+struct jffs2_tmp_dnode_info
+{
+	struct rb_node rb;
+	struct jffs2_full_dnode *fn;
+	uint32_t version;
+	uint32_t data_crc;
+	uint32_t partial_crc;
+	uint32_t csize;
+	uint16_t overlapped;
+};
+
+/* Temporary data structure used during readinode. */
+struct jffs2_readinode_info
+{
+	struct rb_root tn_root;
+	struct jffs2_tmp_dnode_info *mdata_tn;
+	uint32_t highest_version;
+	uint32_t latest_mctime;
+	uint32_t mctime_ver;
+	struct jffs2_full_dirent *fds;
+	struct jffs2_raw_node_ref *latest_ref;
+};
+
+struct jffs2_full_dirent
+{
+	union {
+		struct jffs2_raw_node_ref *raw;
+		struct jffs2_inode_cache *ic; /* Just during part of build */
+	};
+	struct jffs2_full_dirent *next;
+	uint32_t version;
+	uint32_t ino; /* == zero for unlink */
+	unsigned int nhash;
+	unsigned char type;
+	unsigned char name[0];
+};
+
+/*
+  Fragments - used to build a map of which raw node to obtain
+  data from for each part of the ino
+*/
+struct jffs2_node_frag
+{
+	struct rb_node rb;
+	struct jffs2_full_dnode *node; /* NULL for holes */
+	uint32_t size;
+	uint32_t ofs; /* The offset to which this fragment belongs */
+};
+
+struct jffs2_eraseblock
+{
+	struct list_head list;
+	int bad_count;
+	uint32_t offset;		/* of this block in the MTD */
+
+	uint32_t unchecked_size;
+	uint32_t used_size;
+	uint32_t dirty_size;
+	uint32_t wasted_size;
+	uint32_t free_size;	/* Note that sector_size - free_size
+				   is the address of the first free space */
+	uint32_t allocated_refs;
+	struct jffs2_raw_node_ref *first_node;
+	struct jffs2_raw_node_ref *last_node;
+
+	struct jffs2_raw_node_ref *gc_node;	/* Next node to be garbage collected */
+};
+
+static inline int jffs2_blocks_use_vmalloc(struct jffs2_sb_info *c)
+{
+	return ((c->flash_size / c->sector_size) * sizeof (struct jffs2_eraseblock)) > (128 * 1024);
+}
+
+#define ref_totlen(a, b, c) __jffs2_ref_totlen((a), (b), (c))
+
+#define ALLOC_NORMAL	0	/* Normal allocation */
+#define ALLOC_DELETION	1	/* Deletion node. Best to allow it */
+#define ALLOC_GC	2	/* Space requested for GC. Give it or die */
+#define ALLOC_NORETRY	3	/* For jffs2_write_dnode: On failure, return -EAGAIN instead of retrying */
+
+/* How much dirty space before it goes on the very_dirty_list */
+#define VERYDIRTY(c, size) ((size) >= ((c)->sector_size / 2))
+
+/* check if dirty space is more than 255 Byte */
+#define ISDIRTY(size) ((size) >  sizeof (struct jffs2_raw_inode) + JFFS2_MIN_DATA_LEN)
+
+#define PAD(x) (((x)+3)&~3)
+
+static inline struct jffs2_node_frag *frag_first(struct rb_root *root)
+{
+	struct rb_node *node = rb_first(root);
+
+	if (!node)
+		return NULL;
+
+	return rb_entry(node, struct jffs2_node_frag, rb);
+}
+
+static inline struct jffs2_node_frag *frag_last(struct rb_root *root)
+{
+	struct rb_node *node = rb_last(root);
+
+	if (!node)
+		return NULL;
+
+	return rb_entry(node, struct jffs2_node_frag, rb);
+}
+
+#define frag_next(frag) rb_entry(rb_next(&(frag)->rb), struct jffs2_node_frag, rb)
+#define frag_prev(frag) rb_entry(rb_prev(&(frag)->rb), struct jffs2_node_frag, rb)
+#define frag_parent(frag) rb_entry(rb_parent(&(frag)->rb), struct jffs2_node_frag, rb)
+#define frag_left(frag) rb_entry((frag)->rb.rb_left, struct jffs2_node_frag, rb)
+#define frag_right(frag) rb_entry((frag)->rb.rb_right, struct jffs2_node_frag, rb)
+#define frag_erase(frag, list) rb_erase(&frag->rb, list);
+
+#define tn_next(tn) rb_entry(rb_next(&(tn)->rb), struct jffs2_tmp_dnode_info, rb)
+#define tn_prev(tn) rb_entry(rb_prev(&(tn)->rb), struct jffs2_tmp_dnode_info, rb)
+#define tn_parent(tn) rb_entry(rb_parent(&(tn)->rb), struct jffs2_tmp_dnode_info, rb)
+#define tn_left(tn) rb_entry((tn)->rb.rb_left, struct jffs2_tmp_dnode_info, rb)
+#define tn_right(tn) rb_entry((tn)->rb.rb_right, struct jffs2_tmp_dnode_info, rb)
+#define tn_erase(tn, list) rb_erase(&tn->rb, list);
+#define tn_last(list) rb_entry(rb_last(list), struct jffs2_tmp_dnode_info, rb)
+#define tn_first(list) rb_entry(rb_first(list), struct jffs2_tmp_dnode_info, rb)
+
+/* nodelist.c */
+void jffs2_add_fd_to_list(struct jffs2_sb_info *c, struct jffs2_full_dirent *new, struct jffs2_full_dirent **list);
+void jffs2_set_inocache_state(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic, int state);
+struct jffs2_inode_cache *jffs2_get_ino_cache(struct jffs2_sb_info *c, uint32_t ino);
+void jffs2_add_ino_cache (struct jffs2_sb_info *c, struct jffs2_inode_cache *new);
+void jffs2_del_ino_cache(struct jffs2_sb_info *c, struct jffs2_inode_cache *old);
+void jffs2_free_ino_caches(struct jffs2_sb_info *c);
+void jffs2_free_raw_node_refs(struct jffs2_sb_info *c);
+struct jffs2_node_frag *jffs2_lookup_node_frag(struct rb_root *fragtree, uint32_t offset);
+void jffs2_kill_fragtree(struct rb_root *root, struct jffs2_sb_info *c_delete);
+int jffs2_add_full_dnode_to_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, struct jffs2_full_dnode *fn);
+uint32_t jffs2_truncate_fragtree (struct jffs2_sb_info *c, struct rb_root *list, uint32_t size);
+struct jffs2_raw_node_ref *jffs2_link_node_ref(struct jffs2_sb_info *c,
+					       struct jffs2_eraseblock *jeb,
+					       uint32_t ofs, uint32_t len,
+					       struct jffs2_inode_cache *ic);
+extern uint32_t __jffs2_ref_totlen(struct jffs2_sb_info *c,
+				   struct jffs2_eraseblock *jeb,
+				   struct jffs2_raw_node_ref *ref);
+
+/* nodemgmt.c */
+int jffs2_thread_should_wake(struct jffs2_sb_info *c);
+int jffs2_reserve_space(struct jffs2_sb_info *c, uint32_t minsize,
+			uint32_t *len, int prio, uint32_t sumsize);
+int jffs2_reserve_space_gc(struct jffs2_sb_info *c, uint32_t minsize,
+			uint32_t *len, uint32_t sumsize);
+struct jffs2_raw_node_ref *jffs2_add_physical_node_ref(struct jffs2_sb_info *c,
+						       uint32_t ofs, uint32_t len,
+						       struct jffs2_inode_cache *ic);
+void jffs2_complete_reservation(struct jffs2_sb_info *c);
+void jffs2_mark_node_obsolete(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *raw);
+
+/* write.c */
+int jffs2_do_new_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f, uint32_t mode, struct jffs2_raw_inode *ri);
+
+struct jffs2_full_dnode *jffs2_write_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+					   struct jffs2_raw_inode *ri, const unsigned char *data,
+					   uint32_t datalen, int alloc_mode);
+struct jffs2_full_dirent *jffs2_write_dirent(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+					     struct jffs2_raw_dirent *rd, const unsigned char *name,
+					     uint32_t namelen, int alloc_mode);
+int jffs2_write_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			    struct jffs2_raw_inode *ri, unsigned char *buf,
+			    uint32_t offset, uint32_t writelen, uint32_t *retlen);
+int jffs2_do_create(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, struct jffs2_inode_info *f,
+		    struct jffs2_raw_inode *ri, const struct qstr *qstr);
+int jffs2_do_unlink(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, const char *name,
+		    int namelen, struct jffs2_inode_info *dead_f, uint32_t time);
+int jffs2_do_link(struct jffs2_sb_info *c, struct jffs2_inode_info *dir_f, uint32_t ino,
+		   uint8_t type, const char *name, int namelen, uint32_t time);
+
+
+/* readinode.c */
+int jffs2_do_read_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			uint32_t ino, struct jffs2_raw_inode *latest_node);
+int jffs2_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
+void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f);
+
+/* malloc.c */
+int jffs2_create_slab_caches(void);
+void jffs2_destroy_slab_caches(void);
+
+struct jffs2_full_dirent *jffs2_alloc_full_dirent(int namesize);
+void jffs2_free_full_dirent(struct jffs2_full_dirent *);
+struct jffs2_full_dnode *jffs2_alloc_full_dnode(void);
+void jffs2_free_full_dnode(struct jffs2_full_dnode *dnode);
+struct jffs2_raw_dirent *jffs2_alloc_raw_dirent(void);
+void jffs2_free_raw_dirent(struct jffs2_raw_dirent *);
+struct jffs2_raw_inode *jffs2_alloc_raw_inode(void);
+void jffs2_free_raw_inode(struct jffs2_raw_inode *);
+struct jffs2_tmp_dnode_info *jffs2_alloc_tmp_dnode_info(void);
+void jffs2_free_tmp_dnode_info(struct jffs2_tmp_dnode_info *info);
+int jffs2_prealloc_raw_node_refs(struct jffs2_sb_info *c,
+				 struct jffs2_eraseblock *jeb, int nr);
+void jffs2_free_refblock(struct jffs2_raw_node_ref *);
+struct jffs2_node_frag *jffs2_alloc_node_frag(void);
+void jffs2_free_node_frag(struct jffs2_node_frag *);
+struct jffs2_inode_cache *jffs2_alloc_inode_cache(void);
+void jffs2_free_inode_cache(struct jffs2_inode_cache *);
+#ifdef CONFIG_JFFS2_FS_XATTR
+struct jffs2_xattr_datum *jffs2_alloc_xattr_datum(void);
+void jffs2_free_xattr_datum(struct jffs2_xattr_datum *);
+struct jffs2_xattr_ref *jffs2_alloc_xattr_ref(void);
+void jffs2_free_xattr_ref(struct jffs2_xattr_ref *);
+#endif
+
+/* gc.c */
+int jffs2_garbage_collect_pass(struct jffs2_sb_info *c);
+
+/* read.c */
+int jffs2_read_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+		     struct jffs2_full_dnode *fd, unsigned char *buf,
+		     int ofs, int len);
+int jffs2_read_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			   unsigned char *buf, uint32_t offset, uint32_t len);
+char *jffs2_getlink(struct jffs2_sb_info *c, struct jffs2_inode_info *f);
+
+/* scan.c */
+int jffs2_scan_medium(struct jffs2_sb_info *c);
+void jffs2_rotate_lists(struct jffs2_sb_info *c);
+struct jffs2_inode_cache *jffs2_scan_make_ino_cache(struct jffs2_sb_info *c, uint32_t ino);
+int jffs2_scan_classify_jeb(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+int jffs2_scan_dirty_space(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t size);
+
+/* build.c */
+int jffs2_do_mount_fs(struct jffs2_sb_info *c);
+
+/* erase.c */
+int jffs2_erase_pending_blocks(struct jffs2_sb_info *c, int count);
+void jffs2_free_jeb_node_refs(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+/* wbuf.c */
+int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino);
+int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c);
+int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+#endif
+
+#include "debug.h"
+
+#endif /* __JFFS2_NODELIST_H__ */
diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h
new file mode 100644
index 0000000000..b86a55e482
--- /dev/null
+++ b/fs/jffs2/os-linux.h
@@ -0,0 +1,193 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef __JFFS2_OS_LINUX_H__
+#define __JFFS2_OS_LINUX_H__
+
+/* JFFS2 uses Linux mode bits natively -- no need for conversion */
+#define os_to_jffs2_mode(x) (x)
+#define jffs2_to_os_mode(x) (x)
+
+struct kstatfs;
+struct kvec;
+struct fs_device_d;
+
+#define JFFS2_BLOCK_SIZE	PAGE_SIZE
+
+#define JFFS2_INODE_INFO(i) (container_of(i, struct jffs2_inode_info, vfs_inode))
+#define OFNI_EDONI_2SFFJ(f)  (&(f)->vfs_inode)
+#define JFFS2_SB_INFO(sb) (sb->s_fs_info)
+#define OFNI_BS_2SFFJ(c)  ((struct super_block *)c->os_priv)
+
+
+#define JFFS2_F_I_SIZE(f) (OFNI_EDONI_2SFFJ(f)->i_size)
+#define JFFS2_F_I_MODE(f) (OFNI_EDONI_2SFFJ(f)->i_mode)
+#define JFFS2_F_I_UID(f) (i_uid_read(OFNI_EDONI_2SFFJ(f)))
+#define JFFS2_F_I_GID(f) (i_gid_read(OFNI_EDONI_2SFFJ(f)))
+#define JFFS2_F_I_RDEV(f) (OFNI_EDONI_2SFFJ(f)->i_rdev)
+
+#define JFFS2_CLAMP_TIME(t) ((uint32_t)clamp_t(time64_t, (t), 0, U32_MAX))
+#define ITIME(sec) ((struct timespec){sec, 0})
+#define JFFS2_NOW() JFFS2_CLAMP_TIME(ktime_get_real_seconds())
+#define I_SEC(tv) JFFS2_CLAMP_TIME((tv).tv_sec)
+#define JFFS2_F_I_CTIME(f) I_SEC(OFNI_EDONI_2SFFJ(f)->i_ctime)
+#define JFFS2_F_I_MTIME(f) I_SEC(OFNI_EDONI_2SFFJ(f)->i_mtime)
+#define JFFS2_F_I_ATIME(f) I_SEC(OFNI_EDONI_2SFFJ(f)->i_atime)
+#define sleep_on_spinunlock(wq, s)				\
+	do {							\
+		DECLARE_WAITQUEUE(__wait, current);		\
+		add_wait_queue((wq), &__wait);			\
+		set_current_state(TASK_UNINTERRUPTIBLE);	\
+		spin_unlock(s);					\
+		schedule();					\
+		remove_wait_queue((wq), &__wait);		\
+	} while(0)
+
+static inline void jffs2_init_inode_info(struct jffs2_inode_info *f)
+{
+	f->highest_version = 0;
+	f->fragtree = RB_ROOT;
+	f->metadata = NULL;
+	f->dents = NULL;
+	f->target = NULL;
+	f->flags = 0;
+	f->usercompr = 0;
+}
+
+struct jffs2_file {
+	struct inode *inode;
+	void *buf;
+	unsigned int offset;
+};
+
+#define jffs2_is_readonly(c) (OFNI_BS_2SFFJ(c)->s_flags & SB_RDONLY)
+
+#define SECTOR_ADDR(x) ( (((unsigned long)(x) / c->sector_size) * c->sector_size) )
+#ifndef CONFIG_JFFS2_FS_WRITEBUFFER
+
+
+#ifdef CONFIG_JFFS2_SUMMARY
+#define jffs2_can_mark_obsolete(c) (0)
+#else
+#define jffs2_can_mark_obsolete(c) (1)
+#endif
+
+#define jffs2_is_writebuffered(c) (0)
+#define jffs2_cleanmarker_oob(c) (0)
+#define jffs2_write_nand_cleanmarker(c,jeb) (-EIO)
+
+#define jffs2_flash_write(c, ofs, len, retlen, buf) jffs2_flash_direct_write(c, ofs, len, retlen, buf)
+#define jffs2_flash_read(c, ofs, len, retlen, buf) (mtd_read((c)->mtd, ofs, len, retlen, buf))
+#define jffs2_flush_wbuf_pad(c) ({ do{} while(0); (void)(c), 0; })
+#define jffs2_flush_wbuf_gc(c, i) ({ do{} while(0); (void)(c), (void) i, 0; })
+#define jffs2_write_nand_badblock(c,jeb,bad_offset) (1)
+#define jffs2_nand_flash_setup(c) (0)
+#define jffs2_nand_flash_cleanup(c) do {} while(0)
+#define jffs2_wbuf_dirty(c) (0)
+#define jffs2_flash_writev(a,b,c,d,e,f) jffs2_flash_direct_writev(a,b,c,d,e)
+#define jffs2_wbuf_timeout NULL
+#define jffs2_wbuf_process NULL
+#define jffs2_dataflash(c) (0)
+#define jffs2_dataflash_setup(c) (0)
+#define jffs2_dataflash_cleanup(c) do {} while (0)
+#define jffs2_nor_wbuf_flash(c) (0)
+#define jffs2_nor_wbuf_flash_setup(c) (0)
+#define jffs2_nor_wbuf_flash_cleanup(c) do {} while (0)
+#define jffs2_ubivol(c) (0)
+#define jffs2_ubivol_setup(c) (0)
+#define jffs2_ubivol_cleanup(c) do {} while (0)
+#define jffs2_dirty_trigger(c) do {} while (0)
+
+#else /* NAND and/or ECC'd NOR support present */
+
+#define jffs2_is_writebuffered(c) (c->wbuf != NULL)
+
+#ifdef CONFIG_JFFS2_SUMMARY
+#define jffs2_can_mark_obsolete(c) (0)
+#else
+#define jffs2_can_mark_obsolete(c) (c->mtd->flags & (MTD_BIT_WRITEABLE))
+#endif
+
+#define jffs2_cleanmarker_oob(c) (c->mtd->type == MTD_NANDFLASH)
+
+#define jffs2_wbuf_dirty(c) (!!(c)->wbuf_len)
+
+/* wbuf.c */
+int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino);
+int jffs2_flash_write(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *retlen, const u_char *buf);
+int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *retlen, u_char *buf);
+int jffs2_check_oob_empty(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,int mode);
+int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+int jffs2_write_nand_cleanmarker(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb);
+int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, uint32_t bad_offset);
+void jffs2_wbuf_timeout(unsigned long data);
+void jffs2_wbuf_process(void *data);
+int jffs2_flush_wbuf_gc(struct jffs2_sb_info *c, uint32_t ino);
+int jffs2_flush_wbuf_pad(struct jffs2_sb_info *c);
+int jffs2_nand_flash_setup(struct jffs2_sb_info *c);
+void jffs2_nand_flash_cleanup(struct jffs2_sb_info *c);
+
+#define jffs2_dataflash(c) (c->mtd->type == MTD_DATAFLASH)
+int jffs2_dataflash_setup(struct jffs2_sb_info *c);
+void jffs2_dataflash_cleanup(struct jffs2_sb_info *c);
+#define jffs2_ubivol(c) (c->mtd->type == MTD_UBIVOLUME)
+int jffs2_ubivol_setup(struct jffs2_sb_info *c);
+void jffs2_ubivol_cleanup(struct jffs2_sb_info *c);
+
+#define jffs2_nor_wbuf_flash(c) (c->mtd->type == MTD_NORFLASH && ! (c->mtd->flags & MTD_BIT_WRITEABLE))
+int jffs2_nor_wbuf_flash_setup(struct jffs2_sb_info *c);
+void jffs2_nor_wbuf_flash_cleanup(struct jffs2_sb_info *c);
+void jffs2_dirty_trigger(struct jffs2_sb_info *c);
+
+#endif /* WRITEBUFFER */
+
+/* background.c */
+int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c);
+void jffs2_stop_garbage_collect_thread(struct jffs2_sb_info *c);
+void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c);
+
+/* dir.c */
+extern const struct file_operations jffs2_dir_operations;
+extern const struct inode_operations jffs2_dir_inode_operations;
+
+/* file.c */
+extern const struct file_operations jffs2_file_operations;
+extern const struct inode_operations jffs2_file_inode_operations;
+extern const struct address_space_operations jffs2_file_address_operations;
+int jffs2_fsync(struct file *, loff_t, loff_t, int);
+
+/* ioctl.c */
+long jffs2_ioctl(struct file *, unsigned int, unsigned long);
+
+/* symlink.c */
+extern const struct inode_operations jffs2_symlink_inode_operations;
+
+/* fs.c */
+struct inode *jffs2_iget(struct super_block *, unsigned long);
+int jffs2_do_fill_super(struct super_block *sb, int);
+void jffs2_gc_release_inode(struct jffs2_sb_info *c,
+			    struct jffs2_inode_info *f);
+struct jffs2_inode_info *jffs2_gc_fetch_inode(struct jffs2_sb_info *c,
+					      int inum, int unlinked);
+
+void jffs2_flash_cleanup(struct jffs2_sb_info *c);
+
+/* super.c */
+int jffs2_fill_super(struct fs_device_d *fsdev, int silent);
+
+/* writev.c */
+int jffs2_flash_direct_writev(struct jffs2_sb_info *c, const struct kvec *vecs,
+		       unsigned long count, loff_t to, size_t *retlen);
+int jffs2_flash_direct_write(struct jffs2_sb_info *c, loff_t ofs, size_t len,
+			size_t *retlen, const u_char *buf);
+
+#endif /* __JFFS2_OS_LINUX_H__ */
+
diff --git a/fs/jffs2/read.c b/fs/jffs2/read.c
new file mode 100644
index 0000000000..2848e4d1d8
--- /dev/null
+++ b/fs/jffs2/read.c
@@ -0,0 +1,229 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <crc.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/compiler.h>
+#include "nodelist.h"
+#include "compr.h"
+
+int jffs2_read_dnode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+		     struct jffs2_full_dnode *fd, unsigned char *buf,
+		     int ofs, int len)
+{
+	struct jffs2_raw_inode *ri;
+	size_t readlen;
+	uint32_t crc;
+	unsigned char *decomprbuf = NULL;
+	unsigned char *readbuf = NULL;
+	int ret = 0;
+
+	ri = jffs2_alloc_raw_inode();
+	if (!ri)
+		return -ENOMEM;
+
+	ret = jffs2_flash_read(c, ref_offset(fd->raw), sizeof(*ri), &readlen, (char *)ri);
+	if (ret) {
+		jffs2_free_raw_inode(ri);
+		pr_warn("Error reading node from 0x%08x: %d\n",
+			ref_offset(fd->raw), ret);
+		return ret;
+	}
+	if (readlen != sizeof(*ri)) {
+		jffs2_free_raw_inode(ri);
+		pr_warn("Short read from 0x%08x: wanted 0x%zx bytes, got 0x%zx\n",
+			ref_offset(fd->raw), sizeof(*ri), readlen);
+		return -EIO;
+	}
+	crc = crc32(0, ri, sizeof(*ri)-8);
+
+	jffs2_dbg(1, "Node read from %08x: node_crc %08x, calculated CRC %08x. dsize %x, csize %x, offset %x, buf %p\n",
+		  ref_offset(fd->raw), je32_to_cpu(ri->node_crc),
+		  crc, je32_to_cpu(ri->dsize), je32_to_cpu(ri->csize),
+		  je32_to_cpu(ri->offset), buf);
+	if (crc != je32_to_cpu(ri->node_crc)) {
+		pr_warn("Node CRC %08x != calculated CRC %08x for node at %08x\n",
+			je32_to_cpu(ri->node_crc), crc, ref_offset(fd->raw));
+		ret = -EIO;
+		goto out_ri;
+	}
+
+	/* There was a bug where we wrote hole nodes out with csize/dsize
+	   swapped. Deal with it */
+	if (ri->compr == JFFS2_COMPR_ZERO && !je32_to_cpu(ri->dsize) &&
+	    je32_to_cpu(ri->csize)) {
+		ri->dsize = ri->csize;
+		ri->csize = cpu_to_je32(0);
+	}
+
+	D1(if(ofs + len > je32_to_cpu(ri->dsize)) {
+			pr_warn("jffs2_read_dnode() asked for %d bytes at %d from %d-byte node\n",
+				len, ofs, je32_to_cpu(ri->dsize));
+		ret = -EINVAL;
+		goto out_ri;
+	});
+
+
+	if (ri->compr == JFFS2_COMPR_ZERO) {
+		memset(buf, 0, len);
+		goto out_ri;
+	}
+
+	/* Cases:
+	   Reading whole node and it's uncompressed - read directly to buffer provided, check CRC.
+	   Reading whole node and it's compressed - read into comprbuf, check CRC and decompress to buffer provided
+	   Reading partial node and it's uncompressed - read into readbuf, check CRC, and copy
+	   Reading partial node and it's compressed - read into readbuf, check checksum, decompress to decomprbuf and copy
+	*/
+	if (ri->compr == JFFS2_COMPR_NONE && len == je32_to_cpu(ri->dsize)) {
+		readbuf = buf;
+	} else {
+		readbuf = kmalloc(je32_to_cpu(ri->csize), GFP_KERNEL);
+		if (!readbuf) {
+			ret = -ENOMEM;
+			goto out_ri;
+		}
+	}
+	if (ri->compr != JFFS2_COMPR_NONE) {
+		if (len < je32_to_cpu(ri->dsize)) {
+			decomprbuf = kmalloc(je32_to_cpu(ri->dsize), GFP_KERNEL);
+			if (!decomprbuf) {
+				ret = -ENOMEM;
+				goto out_readbuf;
+			}
+		} else {
+			decomprbuf = buf;
+		}
+	} else {
+		decomprbuf = readbuf;
+	}
+
+	jffs2_dbg(2, "Read %d bytes to %p\n", je32_to_cpu(ri->csize),
+		  readbuf);
+	ret = jffs2_flash_read(c, (ref_offset(fd->raw)) + sizeof(*ri),
+			       je32_to_cpu(ri->csize), &readlen, readbuf);
+
+	if (!ret && readlen != je32_to_cpu(ri->csize))
+		ret = -EIO;
+	if (ret)
+		goto out_decomprbuf;
+
+	crc = crc32(0, readbuf, je32_to_cpu(ri->csize));
+	if (crc != je32_to_cpu(ri->data_crc)) {
+		pr_warn("Data CRC %08x != calculated CRC %08x for node at %08x\n",
+			je32_to_cpu(ri->data_crc), crc, ref_offset(fd->raw));
+		ret = -EIO;
+		goto out_decomprbuf;
+	}
+	jffs2_dbg(2, "Data CRC matches calculated CRC %08x\n", crc);
+	if (ri->compr != JFFS2_COMPR_NONE) {
+		jffs2_dbg(2, "Decompress %d bytes from %p to %d bytes at %p\n",
+			  je32_to_cpu(ri->csize), readbuf,
+			  je32_to_cpu(ri->dsize), decomprbuf);
+		ret = jffs2_decompress(c, f, ri->compr | (ri->usercompr << 8), readbuf, decomprbuf, je32_to_cpu(ri->csize), je32_to_cpu(ri->dsize));
+		if (ret) {
+			pr_warn("Error: jffs2_decompress returned %d\n", ret);
+			goto out_decomprbuf;
+		}
+	}
+
+	if (len < je32_to_cpu(ri->dsize)) {
+		memcpy(buf, decomprbuf+ofs, len);
+	}
+ out_decomprbuf:
+	if(decomprbuf != buf && decomprbuf != readbuf)
+		kfree(decomprbuf);
+ out_readbuf:
+	if(readbuf != buf)
+		kfree(readbuf);
+ out_ri:
+	jffs2_free_raw_inode(ri);
+
+	return ret;
+}
+
+int jffs2_read_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			   unsigned char *buf, uint32_t offset, uint32_t len)
+{
+	uint32_t end = offset + len;
+	struct jffs2_node_frag *frag;
+	int ret;
+
+	jffs2_dbg(1, "%s(): ino #%u, range 0x%08x-0x%08x\n",
+		  __func__, f->inocache->ino, offset, offset + len);
+
+	frag = jffs2_lookup_node_frag(&f->fragtree, offset);
+
+	/* XXX FIXME: Where a single physical node actually shows up in two
+	   frags, we read it twice. Don't do that. */
+	/* Now we're pointing at the first frag which overlaps our page
+	 * (or perhaps is before it, if we've been asked to read off the
+	 * end of the file). */
+	while(offset < end) {
+		jffs2_dbg(2, "%s(): offset %d, end %d\n",
+			  __func__, offset, end);
+		if (unlikely(!frag || frag->ofs > offset ||
+			     frag->ofs + frag->size <= offset)) {
+			uint32_t holesize = end - offset;
+			if (frag && frag->ofs > offset) {
+				jffs2_dbg(1, "Eep. Hole in ino #%u fraglist. frag->ofs = 0x%08x, offset = 0x%08x\n",
+					  f->inocache->ino, frag->ofs, offset);
+				holesize = min(holesize, frag->ofs - offset);
+			}
+			jffs2_dbg(1, "Filling non-frag hole from %d-%d\n",
+				  offset, offset + holesize);
+			memset(buf, 0, holesize);
+			buf += holesize;
+			offset += holesize;
+			continue;
+		} else if (unlikely(!frag->node)) {
+			uint32_t holeend = min(end, frag->ofs + frag->size);
+			jffs2_dbg(1, "Filling frag hole from %d-%d (frag 0x%x 0x%x)\n",
+				  offset, holeend, frag->ofs,
+				  frag->ofs + frag->size);
+			memset(buf, 0, holeend - offset);
+			buf += holeend - offset;
+			offset = holeend;
+			frag = frag_next(frag);
+			continue;
+		} else {
+			uint32_t readlen;
+			uint32_t fragofs; /* offset within the frag to start reading */
+
+			fragofs = offset - frag->ofs;
+			readlen = min(frag->size - fragofs, end - offset);
+			jffs2_dbg(1, "Reading %d-%d from node at 0x%08x (%d)\n",
+				  frag->ofs+fragofs,
+				  frag->ofs + fragofs+readlen,
+				  ref_offset(frag->node->raw),
+				  ref_flags(frag->node->raw));
+			ret = jffs2_read_dnode(c, f, frag->node, buf, fragofs + frag->ofs - frag->node->ofs, readlen);
+			jffs2_dbg(2, "node read done\n");
+			if (ret) {
+				jffs2_dbg(1, "%s(): error %d\n",
+					  __func__, ret);
+				memset(buf, 0, readlen);
+				return ret;
+			}
+			buf += readlen;
+			offset += readlen;
+			frag = frag_next(frag);
+			jffs2_dbg(2, "node read was OK. Looping\n");
+		}
+	}
+
+	return 0;
+}
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
new file mode 100644
index 0000000000..0fe67cbb6b
--- /dev/null
+++ b/fs/jffs2/readinode.c
@@ -0,0 +1,1401 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <common.h>
+#include <crc.h>
+#include <fs.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pagemap.h>
+#include <linux/mtd/mtd.h>
+#include "nodelist.h"
+
+/*
+ * Check the data CRC of the node.
+ *
+ * Returns: 0 if the data CRC is correct;
+ * 	    1 - if incorrect;
+ *	    error code if an error occurred.
+ */
+static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn)
+{
+	struct jffs2_raw_node_ref *ref = tn->fn->raw;
+	int err = 0, pointed = 0;
+	struct jffs2_eraseblock *jeb;
+	unsigned char *buffer;
+	uint32_t crc, ofs, len;
+	size_t retlen;
+
+	BUG_ON(tn->csize == 0);
+
+	/* Calculate how many bytes were already checked */
+	ofs = ref_offset(ref) + sizeof(struct jffs2_raw_inode);
+	len = tn->csize;
+
+	if (jffs2_is_writebuffered(c)) {
+		int adj = ofs % c->wbuf_pagesize;
+		if (likely(adj))
+			adj = c->wbuf_pagesize - adj;
+
+		if (adj >= tn->csize) {
+			dbg_readinode("no need to check node at %#08x, data length %u, data starts at %#08x - it has already been checked.\n",
+				      ref_offset(ref), tn->csize, ofs);
+			goto adj_acc;
+		}
+
+		ofs += adj;
+		len -= adj;
+	}
+
+	dbg_readinode("check node at %#08x, data length %u, partial CRC %#08x, correct CRC %#08x, data starts at %#08x, start checking from %#08x - %u bytes.\n",
+		ref_offset(ref), tn->csize, tn->partial_crc, tn->data_crc, ofs - len, ofs, len);
+
+	if (!pointed) {
+		buffer = kmalloc(len, GFP_KERNEL);
+		if (unlikely(!buffer))
+			return -ENOMEM;
+
+		/* TODO: this is very frequent pattern, make it a separate
+		 * routine */
+		err = jffs2_flash_read(c, ofs, len, &retlen, buffer);
+		if (err) {
+			JFFS2_ERROR("can not read %d bytes from 0x%08x, error code: %d.\n", len, ofs, err);
+			goto free_out;
+		}
+
+		if (retlen != len) {
+			JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n", ofs, retlen, len);
+			err = -EIO;
+			goto free_out;
+		}
+	}
+
+	/* Continue calculating CRC */
+	crc = crc32(tn->partial_crc, buffer, len);
+	if(!pointed)
+		kfree(buffer);
+
+	if (crc != tn->data_crc) {
+		JFFS2_NOTICE("wrong data CRC in data node at 0x%08x: read %#08x, calculated %#08x.\n",
+			     ref_offset(ref), tn->data_crc, crc);
+		return 1;
+	}
+
+adj_acc:
+	jeb = &c->blocks[ref->flash_offset / c->sector_size];
+	len = ref_totlen(c, jeb, ref);
+	/* If it should be REF_NORMAL, it'll get marked as such when
+	   we build the fragtree, shortly. No need to worry about GC
+	   moving it while it's marked REF_PRISTINE -- GC won't happen
+	   till we've finished checking every inode anyway. */
+	ref->flash_offset |= REF_PRISTINE;
+	/*
+	 * Mark the node as having been checked and fix the
+	 * accounting accordingly.
+	 */
+	spin_lock(&c->erase_completion_lock);
+	jeb->used_size += len;
+	jeb->unchecked_size -= len;
+	c->used_size += len;
+	c->unchecked_size -= len;
+	jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
+	spin_unlock(&c->erase_completion_lock);
+
+	return 0;
+
+free_out:
+	if(!pointed)
+		kfree(buffer);
+	return err;
+}
+
+/*
+ * Helper function for jffs2_add_older_frag_to_fragtree().
+ *
+ * Checks the node if we are in the checking stage.
+ */
+static int check_tn_node(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn)
+{
+	int ret;
+
+	BUG_ON(ref_obsolete(tn->fn->raw));
+
+	/* We only check the data CRC of unchecked nodes */
+	if (ref_flags(tn->fn->raw) != REF_UNCHECKED)
+		return 0;
+
+	dbg_readinode("check node %#04x-%#04x, phys offs %#08x\n",
+		      tn->fn->ofs, tn->fn->ofs + tn->fn->size, ref_offset(tn->fn->raw));
+
+	ret = check_node_data(c, tn);
+	if (unlikely(ret < 0)) {
+		JFFS2_ERROR("check_node_data() returned error: %d.\n",
+			ret);
+	} else if (unlikely(ret > 0)) {
+		dbg_readinode("CRC error, mark it obsolete.\n");
+		jffs2_mark_node_obsolete(c, tn->fn->raw);
+	}
+
+	return ret;
+}
+
+static struct jffs2_tmp_dnode_info *jffs2_lookup_tn(struct rb_root *tn_root, uint32_t offset)
+{
+	struct rb_node *next;
+	struct jffs2_tmp_dnode_info *tn = NULL;
+
+	dbg_readinode("root %p, offset %d\n", tn_root, offset);
+
+	next = tn_root->rb_node;
+
+	while (next) {
+		tn = rb_entry(next, struct jffs2_tmp_dnode_info, rb);
+
+		if (tn->fn->ofs < offset)
+			next = tn->rb.rb_right;
+		else if (tn->fn->ofs >= offset)
+			next = tn->rb.rb_left;
+		else
+			break;
+	}
+
+	return tn;
+}
+
+
+static void jffs2_kill_tn(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn)
+{
+	jffs2_mark_node_obsolete(c, tn->fn->raw);
+	jffs2_free_full_dnode(tn->fn);
+	jffs2_free_tmp_dnode_info(tn);
+}
+/*
+ * This function is used when we read an inode. Data nodes arrive in
+ * arbitrary order -- they may be older or newer than the nodes which
+ * are already in the tree. Where overlaps occur, the older node can
+ * be discarded as long as the newer passes the CRC check. We don't
+ * bother to keep track of holes in this rbtree, and neither do we deal
+ * with frags -- we can have multiple entries starting at the same
+ * offset, and the one with the smallest length will come first in the
+ * ordering.
+ *
+ * Returns 0 if the node was handled (including marking it obsolete)
+ *	 < 0 an if error occurred
+ */
+static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c,
+				struct jffs2_readinode_info *rii,
+				struct jffs2_tmp_dnode_info *tn)
+{
+	uint32_t fn_end = tn->fn->ofs + tn->fn->size;
+	struct jffs2_tmp_dnode_info *this, *ptn;
+
+	dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw));
+
+	/* If a node has zero dsize, we only have to keep it if it might be the
+	   node with highest version -- i.e. the one which will end up as f->metadata.
+	   Note that such nodes won't be REF_UNCHECKED since there are no data to
+	   check anyway. */
+	if (!tn->fn->size) {
+		if (rii->mdata_tn) {
+			if (rii->mdata_tn->version < tn->version) {
+				/* We had a candidate mdata node already */
+				dbg_readinode("kill old mdata with ver %d\n", rii->mdata_tn->version);
+				jffs2_kill_tn(c, rii->mdata_tn);
+			} else {
+				dbg_readinode("kill new mdata with ver %d (older than existing %d\n",
+					      tn->version, rii->mdata_tn->version);
+				jffs2_kill_tn(c, tn);
+				return 0;
+			}
+		}
+		rii->mdata_tn = tn;
+		dbg_readinode("keep new mdata with ver %d\n", tn->version);
+		return 0;
+	}
+
+	/* Find the earliest node which _may_ be relevant to this one */
+	this = jffs2_lookup_tn(&rii->tn_root, tn->fn->ofs);
+	if (this) {
+		/* If the node is coincident with another at a lower address,
+		   back up until the other node is found. It may be relevant */
+		while (this->overlapped) {
+			ptn = tn_prev(this);
+			if (!ptn) {
+				/*
+				 * We killed a node which set the overlapped
+				 * flags during the scan. Fix it up.
+				 */
+				this->overlapped = 0;
+				break;
+			}
+			this = ptn;
+		}
+		dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole");
+	}
+
+	while (this) {
+		if (this->fn->ofs > fn_end)
+			break;
+		dbg_readinode("Ponder this ver %d, 0x%x-0x%x\n",
+			      this->version, this->fn->ofs, this->fn->size);
+
+		if (this->version == tn->version) {
+			/* Version number collision means REF_PRISTINE GC. Accept either of them
+			   as long as the CRC is correct. Check the one we have already...  */
+			if (!check_tn_node(c, this)) {
+				/* The one we already had was OK. Keep it and throw away the new one */
+				dbg_readinode("Like old node. Throw away new\n");
+				jffs2_kill_tn(c, tn);
+				return 0;
+			} else {
+				/* Who cares if the new one is good; keep it for now anyway. */
+				dbg_readinode("Like new node. Throw away old\n");
+				rb_replace_node(&this->rb, &tn->rb, &rii->tn_root);
+				jffs2_kill_tn(c, this);
+				/* Same overlapping from in front and behind */
+				return 0;
+			}
+		}
+		if (this->version < tn->version &&
+		    this->fn->ofs >= tn->fn->ofs &&
+		    this->fn->ofs + this->fn->size <= fn_end) {
+			/* New node entirely overlaps 'this' */
+			if (check_tn_node(c, tn)) {
+				dbg_readinode("new node bad CRC\n");
+				jffs2_kill_tn(c, tn);
+				return 0;
+			}
+			/* ... and is good. Kill 'this' and any subsequent nodes which are also overlapped */
+			while (this && this->fn->ofs + this->fn->size <= fn_end) {
+				struct jffs2_tmp_dnode_info *next = tn_next(this);
+				if (this->version < tn->version) {
+					tn_erase(this, &rii->tn_root);
+					dbg_readinode("Kill overlapped ver %d, 0x%x-0x%x\n",
+						      this->version, this->fn->ofs,
+						      this->fn->ofs+this->fn->size);
+					jffs2_kill_tn(c, this);
+				}
+				this = next;
+			}
+			dbg_readinode("Done killing overlapped nodes\n");
+			continue;
+		}
+		if (this->version > tn->version &&
+		    this->fn->ofs <= tn->fn->ofs &&
+		    this->fn->ofs+this->fn->size >= fn_end) {
+			/* New node entirely overlapped by 'this' */
+			if (!check_tn_node(c, this)) {
+				dbg_readinode("Good CRC on old node. Kill new\n");
+				jffs2_kill_tn(c, tn);
+				return 0;
+			}
+			/* ... but 'this' was bad. Replace it... */
+			dbg_readinode("Bad CRC on old overlapping node. Kill it\n");
+			tn_erase(this, &rii->tn_root);
+			jffs2_kill_tn(c, this);
+			break;
+		}
+
+		this = tn_next(this);
+	}
+
+	/* We neither completely obsoleted nor were completely
+	   obsoleted by an earlier node. Insert into the tree */
+	{
+		struct rb_node *parent;
+		struct rb_node **link = &rii->tn_root.rb_node;
+		struct jffs2_tmp_dnode_info *insert_point = NULL;
+
+		while (*link) {
+			parent = *link;
+			insert_point = rb_entry(parent, struct jffs2_tmp_dnode_info, rb);
+			if (tn->fn->ofs > insert_point->fn->ofs)
+				link = &insert_point->rb.rb_right;
+			else if (tn->fn->ofs < insert_point->fn->ofs ||
+				 tn->fn->size < insert_point->fn->size)
+				link = &insert_point->rb.rb_left;
+			else
+				link = &insert_point->rb.rb_right;
+		}
+		rb_link_node(&tn->rb, &insert_point->rb, link);
+		rb_insert_color(&tn->rb, &rii->tn_root);
+	}
+
+	/* If there's anything behind that overlaps us, note it */
+	this = tn_prev(tn);
+	if (this) {
+		while (1) {
+			if (this->fn->ofs + this->fn->size > tn->fn->ofs) {
+				dbg_readinode("Node is overlapped by %p (v %d, 0x%x-0x%x)\n",
+					      this, this->version, this->fn->ofs,
+					      this->fn->ofs+this->fn->size);
+				tn->overlapped = 1;
+				break;
+			}
+			if (!this->overlapped)
+				break;
+
+			ptn = tn_prev(this);
+			if (!ptn) {
+				/*
+				 * We killed a node which set the overlapped
+				 * flags during the scan. Fix it up.
+				 */
+				this->overlapped = 0;
+				break;
+			}
+			this = ptn;
+		}
+	}
+
+	/* If the new node overlaps anything ahead, note it */
+	this = tn_next(tn);
+	while (this && this->fn->ofs < fn_end) {
+		this->overlapped = 1;
+		dbg_readinode("Node ver %d, 0x%x-0x%x is overlapped\n",
+			      this->version, this->fn->ofs,
+			      this->fn->ofs+this->fn->size);
+		this = tn_next(this);
+	}
+	return 0;
+}
+
+/* Trivial function to remove the last node in the tree. Which by definition
+   has no right-hand child — so can be removed just by making its left-hand
+   child (if any) take its place under its parent. Since this is only done
+   when we're consuming the whole tree, there's no need to use rb_erase()
+   and let it worry about adjusting colours and balancing the tree. That
+   would just be a waste of time. */
+static void eat_last(struct rb_root *root, struct rb_node *node)
+{
+	struct rb_node *parent = rb_parent(node);
+	struct rb_node **link;
+
+	/* LAST! */
+	BUG_ON(node->rb_right);
+
+	if (!parent)
+		link = &root->rb_node;
+	else if (node == parent->rb_left)
+		link = &parent->rb_left;
+	else
+		link = &parent->rb_right;
+
+	*link = node->rb_left;
+	if (node->rb_left)
+		node->rb_left->__rb_parent_color = node->__rb_parent_color;
+}
+
+/* We put the version tree in reverse order, so we can use the same eat_last()
+   function that we use to consume the tmpnode tree (tn_root). */
+static void ver_insert(struct rb_root *ver_root, struct jffs2_tmp_dnode_info *tn)
+{
+	struct rb_node **link = &ver_root->rb_node;
+	struct rb_node *parent = NULL;
+	struct jffs2_tmp_dnode_info *this_tn;
+
+	while (*link) {
+		parent = *link;
+		this_tn = rb_entry(parent, struct jffs2_tmp_dnode_info, rb);
+
+		if (tn->version > this_tn->version)
+			link = &parent->rb_left;
+		else
+			link = &parent->rb_right;
+	}
+	dbg_readinode("Link new node at %p (root is %p)\n", link, ver_root);
+	rb_link_node(&tn->rb, parent, link);
+	rb_insert_color(&tn->rb, ver_root);
+}
+
+/* Build final, normal fragtree from tn tree. It doesn't matter which order
+   we add nodes to the real fragtree, as long as they don't overlap. And
+   having thrown away the majority of overlapped nodes as we went, there
+   really shouldn't be many sets of nodes which do overlap. If we start at
+   the end, we can use the overlap markers -- we can just eat nodes which
+   aren't overlapped, and when we encounter nodes which _do_ overlap we
+   sort them all into a temporary tree in version order before replaying them. */
+static int jffs2_build_inode_fragtree(struct jffs2_sb_info *c,
+				      struct jffs2_inode_info *f,
+				      struct jffs2_readinode_info *rii)
+{
+	struct jffs2_tmp_dnode_info *pen, *last, *this;
+	struct rb_root ver_root = RB_ROOT;
+	uint32_t high_ver = 0;
+
+	if (rii->mdata_tn) {
+		dbg_readinode("potential mdata is ver %d at %p\n", rii->mdata_tn->version, rii->mdata_tn);
+		high_ver = rii->mdata_tn->version;
+		rii->latest_ref = rii->mdata_tn->fn->raw;
+	}
+#ifdef JFFS2_DBG_READINODE_MESSAGES
+	this = tn_last(&rii->tn_root);
+	while (this) {
+		dbg_readinode("tn %p ver %d range 0x%x-0x%x ov %d\n", this, this->version, this->fn->ofs,
+			      this->fn->ofs+this->fn->size, this->overlapped);
+		this = tn_prev(this);
+	}
+#endif
+	pen = tn_last(&rii->tn_root);
+	while ((last = pen)) {
+		pen = tn_prev(last);
+
+		eat_last(&rii->tn_root, &last->rb);
+		ver_insert(&ver_root, last);
+
+		if (unlikely(last->overlapped)) {
+			if (pen)
+				continue;
+			/*
+			 * We killed a node which set the overlapped
+			 * flags during the scan. Fix it up.
+			 */
+			last->overlapped = 0;
+		}
+
+		/* Now we have a bunch of nodes in reverse version
+		   order, in the tree at ver_root. Most of the time,
+		   there'll actually be only one node in the 'tree',
+		   in fact. */
+		this = tn_last(&ver_root);
+
+		while (this) {
+			struct jffs2_tmp_dnode_info *vers_next;
+			int ret;
+			vers_next = tn_prev(this);
+			eat_last(&ver_root, &this->rb);
+			if (check_tn_node(c, this)) {
+				dbg_readinode("node ver %d, 0x%x-0x%x failed CRC\n",
+					     this->version, this->fn->ofs,
+					     this->fn->ofs+this->fn->size);
+				jffs2_kill_tn(c, this);
+			} else {
+				if (this->version > high_ver) {
+					/* Note that this is different from the other
+					   highest_version, because this one is only
+					   counting _valid_ nodes which could give the
+					   latest inode metadata */
+					high_ver = this->version;
+					rii->latest_ref = this->fn->raw;
+				}
+				dbg_readinode("Add %p (v %d, 0x%x-0x%x, ov %d) to fragtree\n",
+					     this, this->version, this->fn->ofs,
+					     this->fn->ofs+this->fn->size, this->overlapped);
+
+				ret = jffs2_add_full_dnode_to_inode(c, f, this->fn);
+				if (ret) {
+					/* Free the nodes in vers_root; let the caller
+					   deal with the rest */
+					JFFS2_ERROR("Add node to tree failed %d\n", ret);
+					while (1) {
+						vers_next = tn_prev(this);
+						if (check_tn_node(c, this))
+							jffs2_mark_node_obsolete(c, this->fn->raw);
+						jffs2_free_full_dnode(this->fn);
+						jffs2_free_tmp_dnode_info(this);
+						this = vers_next;
+						if (!this)
+							break;
+						eat_last(&ver_root, &vers_next->rb);
+					}
+					return ret;
+				}
+				jffs2_free_tmp_dnode_info(this);
+			}
+			this = vers_next;
+		}
+	}
+	return 0;
+}
+
+static void jffs2_free_tmp_dnode_info_list(struct rb_root *list)
+{
+	struct jffs2_tmp_dnode_info *tn, *next;
+
+	rbtree_postorder_for_each_entry_safe(tn, next, list, rb) {
+			jffs2_free_full_dnode(tn->fn);
+			jffs2_free_tmp_dnode_info(tn);
+	}
+
+	*list = RB_ROOT;
+}
+
+static void jffs2_free_full_dirent_list(struct jffs2_full_dirent *fd)
+{
+	struct jffs2_full_dirent *next;
+
+	while (fd) {
+		next = fd->next;
+		jffs2_free_full_dirent(fd);
+		fd = next;
+	}
+}
+
+/* Returns first valid node after 'ref'. May return 'ref' */
+static struct jffs2_raw_node_ref *jffs2_first_valid_node(struct jffs2_raw_node_ref *ref)
+{
+	while (ref && ref->next_in_ino) {
+		if (!ref_obsolete(ref))
+			return ref;
+		dbg_noderef("node at 0x%08x is obsoleted. Ignoring.\n", ref_offset(ref));
+		ref = ref->next_in_ino;
+	}
+	return NULL;
+}
+
+/*
+ * Helper function for jffs2_get_inode_nodes().
+ * It is called every time an directory entry node is found.
+ *
+ * Returns: 0 on success;
+ * 	    negative error code on failure.
+ */
+static inline int read_direntry(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
+				struct jffs2_raw_dirent *rd, size_t read,
+				struct jffs2_readinode_info *rii)
+{
+	struct jffs2_full_dirent *fd;
+	uint32_t crc;
+
+	/* Obsoleted. This cannot happen, surely? dwmw2 20020308 */
+	BUG_ON(ref_obsolete(ref));
+
+	crc = crc32(0, rd, sizeof(*rd) - 8);
+	if (unlikely(crc != je32_to_cpu(rd->node_crc))) {
+		JFFS2_NOTICE("header CRC failed on dirent node at %#08x: read %#08x, calculated %#08x\n",
+			     ref_offset(ref), je32_to_cpu(rd->node_crc), crc);
+		jffs2_mark_node_obsolete(c, ref);
+		return 0;
+	}
+
+	/* If we've never checked the CRCs on this node, check them now */
+	if (ref_flags(ref) == REF_UNCHECKED) {
+		struct jffs2_eraseblock *jeb;
+		int len;
+
+		/* Sanity check */
+		if (unlikely(PAD((rd->nsize + sizeof(*rd))) != PAD(je32_to_cpu(rd->totlen)))) {
+			JFFS2_ERROR("illegal nsize in node at %#08x: nsize %#02x, totlen %#04x\n",
+				    ref_offset(ref), rd->nsize, je32_to_cpu(rd->totlen));
+			jffs2_mark_node_obsolete(c, ref);
+			return 0;
+		}
+
+		jeb = &c->blocks[ref->flash_offset / c->sector_size];
+		len = ref_totlen(c, jeb, ref);
+
+		spin_lock(&c->erase_completion_lock);
+		jeb->used_size += len;
+		jeb->unchecked_size -= len;
+		c->used_size += len;
+		c->unchecked_size -= len;
+		ref->flash_offset = ref_offset(ref) | dirent_node_state(rd);
+		spin_unlock(&c->erase_completion_lock);
+	}
+
+	fd = jffs2_alloc_full_dirent(rd->nsize + 1);
+	if (unlikely(!fd))
+		return -ENOMEM;
+
+	fd->raw = ref;
+	fd->version = je32_to_cpu(rd->version);
+	fd->ino = je32_to_cpu(rd->ino);
+	fd->type = rd->type;
+
+	if (fd->version > rii->highest_version)
+		rii->highest_version = fd->version;
+
+	/* Pick out the mctime of the latest dirent */
+	if(fd->version > rii->mctime_ver && je32_to_cpu(rd->mctime)) {
+		rii->mctime_ver = fd->version;
+		rii->latest_mctime = je32_to_cpu(rd->mctime);
+	}
+
+	/*
+	 * Copy as much of the name as possible from the raw
+	 * dirent we've already read from the flash.
+	 */
+	if (read > sizeof(*rd))
+		memcpy(&fd->name[0], &rd->name[0],
+		       min_t(uint32_t, rd->nsize, (read - sizeof(*rd)) ));
+
+	/* Do we need to copy any more of the name directly from the flash? */
+	if (rd->nsize + sizeof(*rd) > read) {
+		/* FIXME: point() */
+		int err;
+		int already = read - sizeof(*rd);
+
+		err = jffs2_flash_read(c, (ref_offset(ref)) + read,
+				rd->nsize - already, &read, &fd->name[already]);
+		if (unlikely(read != rd->nsize - already) && likely(!err)) {
+			jffs2_free_full_dirent(fd);
+			JFFS2_ERROR("short read: wanted %d bytes, got %zd\n",
+				    rd->nsize - already, read);
+			return -EIO;
+		}
+
+		if (unlikely(err)) {
+			JFFS2_ERROR("read remainder of name: error %d\n", err);
+			jffs2_free_full_dirent(fd);
+			return -EIO;
+		}
+	}
+
+	fd->nhash = full_name_hash(NULL, fd->name, rd->nsize);
+	fd->next = NULL;
+	fd->name[rd->nsize] = '\0';
+
+	/*
+	 * Wheee. We now have a complete jffs2_full_dirent structure, with
+	 * the name in it and everything. Link it into the list
+	 */
+	jffs2_add_fd_to_list(c, fd, &rii->fds);
+
+	return 0;
+}
+
+/*
+ * Helper function for jffs2_get_inode_nodes().
+ * It is called every time an inode node is found.
+ *
+ * Returns: 0 on success (possibly after marking a bad node obsolete);
+ * 	    negative error code on failure.
+ */
+static inline int read_dnode(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
+			     struct jffs2_raw_inode *rd, int rdlen,
+			     struct jffs2_readinode_info *rii)
+{
+	struct jffs2_tmp_dnode_info *tn;
+	uint32_t len, csize;
+	int ret = 0;
+	uint32_t crc;
+
+	/* Obsoleted. This cannot happen, surely? dwmw2 20020308 */
+	BUG_ON(ref_obsolete(ref));
+
+	crc = crc32(0, rd, sizeof(*rd) - 8);
+	if (unlikely(crc != je32_to_cpu(rd->node_crc))) {
+		JFFS2_NOTICE("node CRC failed on dnode at %#08x: read %#08x, calculated %#08x\n",
+			     ref_offset(ref), je32_to_cpu(rd->node_crc), crc);
+		jffs2_mark_node_obsolete(c, ref);
+		return 0;
+	}
+
+	tn = jffs2_alloc_tmp_dnode_info();
+	if (!tn) {
+		JFFS2_ERROR("failed to allocate tn (%zu bytes).\n", sizeof(*tn));
+		return -ENOMEM;
+	}
+
+	tn->partial_crc = 0;
+	csize = je32_to_cpu(rd->csize);
+
+	/* If we've never checked the CRCs on this node, check them now */
+	if (ref_flags(ref) == REF_UNCHECKED) {
+
+		/* Sanity checks */
+		if (unlikely(je32_to_cpu(rd->offset) > je32_to_cpu(rd->isize)) ||
+		    unlikely(PAD(je32_to_cpu(rd->csize) + sizeof(*rd)) != PAD(je32_to_cpu(rd->totlen)))) {
+			JFFS2_WARNING("inode node header CRC is corrupted at %#08x\n", ref_offset(ref));
+			jffs2_dbg_dump_node(c, ref_offset(ref));
+			jffs2_mark_node_obsolete(c, ref);
+			goto free_out;
+		}
+
+		if (jffs2_is_writebuffered(c) && csize != 0) {
+			/* At this point we are supposed to check the data CRC
+			 * of our unchecked node. But thus far, we do not
+			 * know whether the node is valid or obsolete. To
+			 * figure this out, we need to walk all the nodes of
+			 * the inode and build the inode fragtree. We don't
+			 * want to spend time checking data of nodes which may
+			 * later be found to be obsolete. So we put off the full
+			 * data CRC checking until we have read all the inode
+			 * nodes and have started building the fragtree.
+			 *
+			 * The fragtree is being built starting with nodes
+			 * having the highest version number, so we'll be able
+			 * to detect whether a node is valid (i.e., it is not
+			 * overlapped by a node with higher version) or not.
+			 * And we'll be able to check only those nodes, which
+			 * are not obsolete.
+			 *
+			 * Of course, this optimization only makes sense in case
+			 * of NAND flashes (or other flashes with
+			 * !jffs2_can_mark_obsolete()), since on NOR flashes
+			 * nodes are marked obsolete physically.
+			 *
+			 * Since NAND flashes (or other flashes with
+			 * jffs2_is_writebuffered(c)) are anyway read by
+			 * fractions of c->wbuf_pagesize, and we have just read
+			 * the node header, it is likely that the starting part
+			 * of the node data is also read when we read the
+			 * header. So we don't mind to check the CRC of the
+			 * starting part of the data of the node now, and check
+			 * the second part later (in jffs2_check_node_data()).
+			 * Of course, we will not need to re-read and re-check
+			 * the NAND page which we have just read. This is why we
+			 * read the whole NAND page at jffs2_get_inode_nodes(),
+			 * while we needed only the node header.
+			 */
+			unsigned char *buf;
+
+			/* 'buf' will point to the start of data */
+			buf = (unsigned char *)rd + sizeof(*rd);
+			/* len will be the read data length */
+			len = min_t(uint32_t, rdlen - sizeof(*rd), csize);
+			tn->partial_crc = crc32(0, buf, len);
+
+			dbg_readinode("Calculates CRC (%#08x) for %d bytes, csize %d\n", tn->partial_crc, len, csize);
+
+			/* If we actually calculated the whole data CRC
+			 * and it is wrong, drop the node. */
+			if (len >= csize && unlikely(tn->partial_crc != je32_to_cpu(rd->data_crc))) {
+				JFFS2_NOTICE("wrong data CRC in data node at 0x%08x: read %#08x, calculated %#08x.\n",
+					ref_offset(ref), tn->partial_crc, je32_to_cpu(rd->data_crc));
+				jffs2_mark_node_obsolete(c, ref);
+				goto free_out;
+			}
+
+		} else if (csize == 0) {
+			/*
+			 * We checked the header CRC. If the node has no data, adjust
+			 * the space accounting now. For other nodes this will be done
+			 * later either when the node is marked obsolete or when its
+			 * data is checked.
+			 */
+			struct jffs2_eraseblock *jeb;
+
+			dbg_readinode("the node has no data.\n");
+			jeb = &c->blocks[ref->flash_offset / c->sector_size];
+			len = ref_totlen(c, jeb, ref);
+
+			spin_lock(&c->erase_completion_lock);
+			jeb->used_size += len;
+			jeb->unchecked_size -= len;
+			c->used_size += len;
+			c->unchecked_size -= len;
+			ref->flash_offset = ref_offset(ref) | REF_NORMAL;
+			spin_unlock(&c->erase_completion_lock);
+		}
+	}
+
+	tn->fn = jffs2_alloc_full_dnode();
+	if (!tn->fn) {
+		JFFS2_ERROR("alloc fn failed\n");
+		ret = -ENOMEM;
+		goto free_out;
+	}
+
+	tn->version = je32_to_cpu(rd->version);
+	tn->fn->ofs = je32_to_cpu(rd->offset);
+	tn->data_crc = je32_to_cpu(rd->data_crc);
+	tn->csize = csize;
+	tn->fn->raw = ref;
+	tn->overlapped = 0;
+
+	if (tn->version > rii->highest_version)
+		rii->highest_version = tn->version;
+
+	/* There was a bug where we wrote hole nodes out with
+	   csize/dsize swapped. Deal with it */
+	if (rd->compr == JFFS2_COMPR_ZERO && !je32_to_cpu(rd->dsize) && csize)
+		tn->fn->size = csize;
+	else // normal case...
+		tn->fn->size = je32_to_cpu(rd->dsize);
+
+	dbg_readinode2("dnode @%08x: ver %u, offset %#04x, dsize %#04x, csize %#04x\n",
+		       ref_offset(ref), je32_to_cpu(rd->version),
+		       je32_to_cpu(rd->offset), je32_to_cpu(rd->dsize), csize);
+
+	ret = jffs2_add_tn_to_tree(c, rii, tn);
+
+	if (ret) {
+		jffs2_free_full_dnode(tn->fn);
+	free_out:
+		jffs2_free_tmp_dnode_info(tn);
+		return ret;
+	}
+#ifdef JFFS2_DBG_READINODE2_MESSAGES
+	dbg_readinode2("After adding ver %d:\n", je32_to_cpu(rd->version));
+	tn = tn_first(&rii->tn_root);
+	while (tn) {
+		dbg_readinode2("%p: v %d r 0x%x-0x%x ov %d\n",
+			       tn, tn->version, tn->fn->ofs,
+			       tn->fn->ofs+tn->fn->size, tn->overlapped);
+		tn = tn_next(tn);
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Helper function for jffs2_get_inode_nodes().
+ * It is called every time an unknown node is found.
+ *
+ * Returns: 0 on success;
+ * 	    negative error code on failure.
+ */
+static inline int read_unknown(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref, struct jffs2_unknown_node *un)
+{
+	/* We don't mark unknown nodes as REF_UNCHECKED */
+	if (ref_flags(ref) == REF_UNCHECKED) {
+		JFFS2_ERROR("REF_UNCHECKED but unknown node at %#08x\n",
+			    ref_offset(ref));
+		JFFS2_ERROR("Node is {%04x,%04x,%08x,%08x}. Please report this error.\n",
+			    je16_to_cpu(un->magic), je16_to_cpu(un->nodetype),
+			    je32_to_cpu(un->totlen), je32_to_cpu(un->hdr_crc));
+		jffs2_mark_node_obsolete(c, ref);
+		return 0;
+	}
+
+	un->nodetype = cpu_to_je16(JFFS2_NODE_ACCURATE | je16_to_cpu(un->nodetype));
+
+	switch(je16_to_cpu(un->nodetype) & JFFS2_COMPAT_MASK) {
+
+	case JFFS2_FEATURE_INCOMPAT:
+		JFFS2_ERROR("unknown INCOMPAT nodetype %#04X at %#08x\n",
+			    je16_to_cpu(un->nodetype), ref_offset(ref));
+		/* EEP */
+		BUG();
+		break;
+
+	case JFFS2_FEATURE_ROCOMPAT:
+		JFFS2_ERROR("unknown ROCOMPAT nodetype %#04X at %#08x\n",
+			    je16_to_cpu(un->nodetype), ref_offset(ref));
+		BUG_ON(!(c->flags & JFFS2_SB_FLAG_RO));
+		break;
+
+	case JFFS2_FEATURE_RWCOMPAT_COPY:
+		JFFS2_NOTICE("unknown RWCOMPAT_COPY nodetype %#04X at %#08x\n",
+			     je16_to_cpu(un->nodetype), ref_offset(ref));
+		break;
+
+	case JFFS2_FEATURE_RWCOMPAT_DELETE:
+		JFFS2_NOTICE("unknown RWCOMPAT_DELETE nodetype %#04X at %#08x\n",
+			     je16_to_cpu(un->nodetype), ref_offset(ref));
+		jffs2_mark_node_obsolete(c, ref);
+		return 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Helper function for jffs2_get_inode_nodes().
+ * The function detects whether more data should be read and reads it if yes.
+ *
+ * Returns: 0 on success;
+ * 	    negative error code on failure.
+ */
+static int read_more(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
+		     int needed_len, int *rdlen, unsigned char *buf)
+{
+	int err, to_read = needed_len - *rdlen;
+	size_t retlen;
+	uint32_t offs;
+
+	if (jffs2_is_writebuffered(c)) {
+		int rem = to_read % c->wbuf_pagesize;
+
+		if (rem)
+			to_read += c->wbuf_pagesize - rem;
+	}
+
+	/* We need to read more data */
+	offs = ref_offset(ref) + *rdlen;
+
+	dbg_readinode("read more %d bytes\n", to_read);
+
+	err = jffs2_flash_read(c, offs, to_read, &retlen, buf + *rdlen);
+	if (err) {
+		JFFS2_ERROR("can not read %d bytes from 0x%08x, "
+			"error code: %d.\n", to_read, offs, err);
+		return err;
+	}
+
+	if (retlen < to_read) {
+		JFFS2_ERROR("short read at %#08x: %zu instead of %d.\n",
+				offs, retlen, to_read);
+		return -EIO;
+	}
+
+	*rdlen += to_read;
+	return 0;
+}
+
+/* Get tmp_dnode_info and full_dirent for all non-obsolete nodes associated
+   with this ino. Perform a preliminary ordering on data nodes, throwing away
+   those which are completely obsoleted by newer ones. The naïve approach we
+   use to take of just returning them _all_ in version order will cause us to
+   run out of memory in certain degenerate cases. */
+static int jffs2_get_inode_nodes(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+				 struct jffs2_readinode_info *rii)
+{
+	struct jffs2_raw_node_ref *ref, *valid_ref;
+	unsigned char *buf = NULL;
+	union jffs2_node_union *node;
+	size_t retlen;
+	int len, err;
+
+	rii->mctime_ver = 0;
+
+	dbg_readinode("ino #%u\n", f->inocache->ino);
+
+	/* FIXME: in case of NOR and available ->point() this
+	 * needs to be fixed. */
+	len = sizeof(union jffs2_node_union) + c->wbuf_pagesize;
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	spin_lock(&c->erase_completion_lock);
+	valid_ref = jffs2_first_valid_node(f->inocache->nodes);
+	if (!valid_ref && f->inocache->ino != 1)
+		JFFS2_WARNING("Eep. No valid nodes for ino #%u.\n", f->inocache->ino);
+	while (valid_ref) {
+		/* We can hold a pointer to a non-obsolete node without the spinlock,
+		   but _obsolete_ nodes may disappear at any time, if the block
+		   they're in gets erased. So if we mark 'ref' obsolete while we're
+		   not holding the lock, it can go away immediately. For that reason,
+		   we find the next valid node first, before processing 'ref'.
+		*/
+		ref = valid_ref;
+		valid_ref = jffs2_first_valid_node(ref->next_in_ino);
+		spin_unlock(&c->erase_completion_lock);
+
+		cond_resched();
+
+		/*
+		 * At this point we don't know the type of the node we're going
+		 * to read, so we do not know the size of its header. In order
+		 * to minimize the amount of flash IO we assume the header is
+		 * of size = JFFS2_MIN_NODE_HEADER.
+		 */
+		len = JFFS2_MIN_NODE_HEADER;
+		if (jffs2_is_writebuffered(c)) {
+			int end, rem;
+
+			/*
+			 * We are about to read JFFS2_MIN_NODE_HEADER bytes,
+			 * but this flash has some minimal I/O unit. It is
+			 * possible that we'll need to read more soon, so read
+			 * up to the next min. I/O unit, in order not to
+			 * re-read the same min. I/O unit twice.
+			 */
+			end = ref_offset(ref) + len;
+			rem = end % c->wbuf_pagesize;
+			if (rem)
+				end += c->wbuf_pagesize - rem;
+			len = end - ref_offset(ref);
+		}
+
+		dbg_readinode("read %d bytes at %#08x(%d).\n", len, ref_offset(ref), ref_flags(ref));
+
+		/* FIXME: point() */
+		err = jffs2_flash_read(c, ref_offset(ref), len, &retlen, buf);
+		if (err) {
+			JFFS2_ERROR("can not read %d bytes from 0x%08x, error code: %d.\n", len, ref_offset(ref), err);
+			goto free_out;
+		}
+
+		if (retlen < len) {
+			JFFS2_ERROR("short read at %#08x: %zu instead of %d.\n", ref_offset(ref), retlen, len);
+			err = -EIO;
+			goto free_out;
+		}
+
+		node = (union jffs2_node_union *)buf;
+
+		/* No need to mask in the valid bit; it shouldn't be invalid */
+		if (je32_to_cpu(node->u.hdr_crc) != crc32(0, node, sizeof(node->u)-4)) {
+			JFFS2_NOTICE("Node header CRC failed at %#08x. {%04x,%04x,%08x,%08x}\n",
+				     ref_offset(ref), je16_to_cpu(node->u.magic),
+				     je16_to_cpu(node->u.nodetype),
+				     je32_to_cpu(node->u.totlen),
+				     je32_to_cpu(node->u.hdr_crc));
+			jffs2_dbg_dump_node(c, ref_offset(ref));
+			jffs2_mark_node_obsolete(c, ref);
+			goto cont;
+		}
+		if (je16_to_cpu(node->u.magic) != JFFS2_MAGIC_BITMASK) {
+			/* Not a JFFS2 node, whinge and move on */
+			JFFS2_NOTICE("Wrong magic bitmask 0x%04x in node header at %#08x.\n",
+				     je16_to_cpu(node->u.magic), ref_offset(ref));
+			jffs2_mark_node_obsolete(c, ref);
+			goto cont;
+		}
+
+		switch (je16_to_cpu(node->u.nodetype)) {
+
+		case JFFS2_NODETYPE_DIRENT:
+
+			if (JFFS2_MIN_NODE_HEADER < sizeof(struct jffs2_raw_dirent) &&
+			    len < sizeof(struct jffs2_raw_dirent)) {
+				err = read_more(c, ref, sizeof(struct jffs2_raw_dirent), &len, buf);
+				if (unlikely(err))
+					goto free_out;
+			}
+
+			err = read_direntry(c, ref, &node->d, retlen, rii);
+			if (unlikely(err))
+				goto free_out;
+
+			break;
+
+		case JFFS2_NODETYPE_INODE:
+
+			if (JFFS2_MIN_NODE_HEADER < sizeof(struct jffs2_raw_inode) &&
+			    len < sizeof(struct jffs2_raw_inode)) {
+				err = read_more(c, ref, sizeof(struct jffs2_raw_inode), &len, buf);
+				if (unlikely(err))
+					goto free_out;
+			}
+
+			err = read_dnode(c, ref, &node->i, len, rii);
+			if (unlikely(err))
+				goto free_out;
+
+			break;
+
+		default:
+			if (JFFS2_MIN_NODE_HEADER < sizeof(struct jffs2_unknown_node) &&
+			    len < sizeof(struct jffs2_unknown_node)) {
+				err = read_more(c, ref, sizeof(struct jffs2_unknown_node), &len, buf);
+				if (unlikely(err))
+					goto free_out;
+			}
+
+			err = read_unknown(c, ref, &node->u);
+			if (unlikely(err))
+				goto free_out;
+
+		}
+	cont:
+		spin_lock(&c->erase_completion_lock);
+	}
+
+	spin_unlock(&c->erase_completion_lock);
+	kfree(buf);
+
+	f->highest_version = rii->highest_version;
+
+	dbg_readinode("nodes of inode #%u were read, the highest version is %u, latest_mctime %u, mctime_ver %u.\n",
+		      f->inocache->ino, rii->highest_version, rii->latest_mctime,
+		      rii->mctime_ver);
+	return 0;
+
+ free_out:
+	jffs2_free_tmp_dnode_info_list(&rii->tn_root);
+	jffs2_free_full_dirent_list(rii->fds);
+	rii->fds = NULL;
+	kfree(buf);
+	return err;
+}
+
+static int jffs2_do_read_inode_internal(struct jffs2_sb_info *c,
+					struct jffs2_inode_info *f,
+					struct jffs2_raw_inode *latest_node)
+{
+	struct jffs2_readinode_info rii;
+	uint32_t crc, new_size;
+	size_t retlen;
+	int ret;
+
+	dbg_readinode("ino #%u pino/nlink is %d\n", f->inocache->ino,
+		      f->inocache->pino_nlink);
+
+	memset(&rii, 0, sizeof(rii));
+
+	/* Grab all nodes relevant to this ino */
+	ret = jffs2_get_inode_nodes(c, f, &rii);
+
+	if (ret) {
+		JFFS2_ERROR("cannot read nodes for ino %u, returned error is %d\n", f->inocache->ino, ret);
+		if (f->inocache->state == INO_STATE_READING)
+			jffs2_set_inocache_state(c, f->inocache, INO_STATE_CHECKEDABSENT);
+		return ret;
+	}
+
+	ret = jffs2_build_inode_fragtree(c, f, &rii);
+	if (ret) {
+		JFFS2_ERROR("Failed to build final fragtree for inode #%u: error %d\n",
+			    f->inocache->ino, ret);
+		if (f->inocache->state == INO_STATE_READING)
+			jffs2_set_inocache_state(c, f->inocache, INO_STATE_CHECKEDABSENT);
+		jffs2_free_tmp_dnode_info_list(&rii.tn_root);
+		/* FIXME: We could at least crc-check them all */
+		if (rii.mdata_tn) {
+			jffs2_free_full_dnode(rii.mdata_tn->fn);
+			jffs2_free_tmp_dnode_info(rii.mdata_tn);
+			rii.mdata_tn = NULL;
+		}
+		return ret;
+	}
+
+	if (rii.mdata_tn) {
+		if (rii.mdata_tn->fn->raw == rii.latest_ref) {
+			f->metadata = rii.mdata_tn->fn;
+			jffs2_free_tmp_dnode_info(rii.mdata_tn);
+		} else {
+			jffs2_kill_tn(c, rii.mdata_tn);
+		}
+		rii.mdata_tn = NULL;
+	}
+
+	f->dents = rii.fds;
+
+	jffs2_dbg_fragtree_paranoia_check_nolock(f);
+
+	if (unlikely(!rii.latest_ref)) {
+		/* No data nodes for this inode. */
+		if (f->inocache->ino != 1) {
+			JFFS2_WARNING("no data nodes found for ino #%u\n", f->inocache->ino);
+			if (!rii.fds) {
+				if (f->inocache->state == INO_STATE_READING)
+					jffs2_set_inocache_state(c, f->inocache, INO_STATE_CHECKEDABSENT);
+				return -EIO;
+			}
+			JFFS2_NOTICE("but it has children so we fake some modes for it\n");
+		}
+		latest_node->mode = cpu_to_jemode(S_IFDIR|S_IWUSR);
+		latest_node->version = cpu_to_je32(0);
+		latest_node->atime = latest_node->ctime = latest_node->mtime = cpu_to_je32(0);
+		latest_node->isize = cpu_to_je32(0);
+		latest_node->gid = cpu_to_je16(0);
+		latest_node->uid = cpu_to_je16(0);
+		if (f->inocache->state == INO_STATE_READING)
+			jffs2_set_inocache_state(c, f->inocache, INO_STATE_PRESENT);
+		return 0;
+	}
+
+	ret = jffs2_flash_read(c, ref_offset(rii.latest_ref), sizeof(*latest_node), &retlen, (void *)latest_node);
+	if (ret || retlen != sizeof(*latest_node)) {
+		JFFS2_ERROR("failed to read from flash: error %d, %zd of %zd bytes read\n",
+			ret, retlen, sizeof(*latest_node));
+		/* FIXME: If this fails, there seems to be a memory leak. Find it. */
+		return ret ? ret : -EIO;
+	}
+
+	crc = crc32(0, latest_node, sizeof(*latest_node)-8);
+	if (crc != je32_to_cpu(latest_node->node_crc)) {
+		JFFS2_ERROR("CRC failed for read_inode of inode %u at physical location 0x%x\n",
+			f->inocache->ino, ref_offset(rii.latest_ref));
+		return -EIO;
+	}
+
+	switch(jemode_to_cpu(latest_node->mode) & S_IFMT) {
+	case S_IFDIR:
+		if (rii.mctime_ver > je32_to_cpu(latest_node->version)) {
+			/* The times in the latest_node are actually older than
+			   mctime in the latest dirent. Cheat. */
+			latest_node->ctime = latest_node->mtime = cpu_to_je32(rii.latest_mctime);
+		}
+		break;
+
+
+	case S_IFREG:
+		/* If it was a regular file, truncate it to the latest node's isize */
+		new_size = jffs2_truncate_fragtree(c, &f->fragtree, je32_to_cpu(latest_node->isize));
+		if (new_size != je32_to_cpu(latest_node->isize)) {
+			JFFS2_WARNING("Truncating ino #%u to %d bytes failed because it only had %d bytes to start with!\n",
+				      f->inocache->ino, je32_to_cpu(latest_node->isize), new_size);
+			latest_node->isize = cpu_to_je32(new_size);
+		}
+		break;
+
+	case S_IFLNK:
+		/* Hack to work around broken isize in old symlink code.
+		   Remove this when dwmw2 comes to his senses and stops
+		   symlinks from being an entirely gratuitous special
+		   case. */
+		if (!je32_to_cpu(latest_node->isize))
+			latest_node->isize = latest_node->dsize;
+
+		if (f->inocache->state != INO_STATE_CHECKING) {
+			/* Symlink's inode data is the target path. Read it and
+			 * keep in RAM to facilitate quick follow symlink
+			 * operation. */
+			uint32_t csize = je32_to_cpu(latest_node->csize);
+			if (csize > JFFS2_MAX_NAME_LEN)
+				return -ENAMETOOLONG;
+			f->target = kmalloc(csize + 1, GFP_KERNEL);
+			if (!f->target) {
+				JFFS2_ERROR("can't allocate %u bytes of memory for the symlink target path cache\n", csize);
+				return -ENOMEM;
+			}
+
+			ret = jffs2_flash_read(c, ref_offset(rii.latest_ref) + sizeof(*latest_node),
+					       csize, &retlen, (char *)f->target);
+
+			if (ret || retlen != csize) {
+				if (retlen != csize)
+					ret = -EIO;
+				kfree(f->target);
+				f->target = NULL;
+				return ret;
+			}
+
+			f->target[csize] = '\0';
+			dbg_readinode("symlink's target '%s' cached\n", f->target);
+		}
+
+		/* fall through... */
+
+	case S_IFBLK:
+	case S_IFCHR:
+		/* Certain inode types should have only one data node, and it's
+		   kept as the metadata node */
+		if (f->metadata) {
+			JFFS2_ERROR("Argh. Special inode #%u with mode 0%o had metadata node\n",
+			       f->inocache->ino, jemode_to_cpu(latest_node->mode));
+			return -EIO;
+		}
+		if (!frag_first(&f->fragtree)) {
+			JFFS2_ERROR("Argh. Special inode #%u with mode 0%o has no fragments\n",
+			       f->inocache->ino, jemode_to_cpu(latest_node->mode));
+			return -EIO;
+		}
+		/* ASSERT: f->fraglist != NULL */
+		if (frag_next(frag_first(&f->fragtree))) {
+			JFFS2_ERROR("Argh. Special inode #%u with mode 0x%x had more than one node\n",
+			       f->inocache->ino, jemode_to_cpu(latest_node->mode));
+			/* FIXME: Deal with it - check crc32, check for duplicate node, check times and discard the older one */
+			return -EIO;
+		}
+		/* OK. We're happy */
+		f->metadata = frag_first(&f->fragtree)->node;
+		jffs2_free_node_frag(frag_first(&f->fragtree));
+		f->fragtree = RB_ROOT;
+		break;
+	}
+	if (f->inocache->state == INO_STATE_READING)
+		jffs2_set_inocache_state(c, f->inocache, INO_STATE_PRESENT);
+
+	return 0;
+}
+
+/* Scan the list of all nodes present for this ino, build map of versions, etc. */
+int jffs2_do_read_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
+			uint32_t ino, struct jffs2_raw_inode *latest_node)
+{
+	dbg_readinode("read inode #%u\n", ino);
+
+	spin_lock(&c->inocache_lock);
+	f->inocache = jffs2_get_ino_cache(c, ino);
+
+	if (f->inocache) {
+		/* Check its state. We may need to wait before we can use it */
+		switch(f->inocache->state) {
+		case INO_STATE_UNCHECKED:
+		case INO_STATE_CHECKEDABSENT:
+			f->inocache->state = INO_STATE_READING;
+			break;
+
+		case INO_STATE_CHECKING:
+		case INO_STATE_GC:
+			break;
+		case INO_STATE_READING:
+		case INO_STATE_PRESENT:
+			/* Eep. This should never happen. It can
+			happen if Linux calls read_inode() again
+			before clear_inode() has finished though. */
+			JFFS2_ERROR("Eep. Trying to read_inode #%u when it's already in state %d!\n", ino, f->inocache->state);
+			/* Fail. That's probably better than allowing it to succeed */
+			f->inocache = NULL;
+			break;
+
+		default:
+			BUG();
+		}
+	}
+	spin_unlock(&c->inocache_lock);
+
+	if (!f->inocache && ino == 1) {
+		/* Special case - no root inode on medium */
+		f->inocache = jffs2_alloc_inode_cache();
+		if (!f->inocache) {
+			JFFS2_ERROR("cannot allocate inocache for root inode\n");
+			return -ENOMEM;
+		}
+		dbg_readinode("creating inocache for root inode\n");
+		memset(f->inocache, 0, sizeof(struct jffs2_inode_cache));
+		f->inocache->ino = f->inocache->pino_nlink = 1;
+		f->inocache->nodes = (struct jffs2_raw_node_ref *)f->inocache;
+		f->inocache->state = INO_STATE_READING;
+		jffs2_add_ino_cache(c, f->inocache);
+	}
+	if (!f->inocache) {
+		JFFS2_ERROR("requested to read a nonexistent ino %u\n", ino);
+		return -ENOENT;
+	}
+
+	return jffs2_do_read_inode_internal(c, f, latest_node);
+}
+
+int jffs2_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic)
+{
+	struct jffs2_raw_inode n;
+	struct jffs2_inode_info *f = kzalloc(sizeof(*f), GFP_KERNEL);
+	int ret;
+
+	if (!f)
+		return -ENOMEM;
+
+	mutex_init(&f->sem);
+	mutex_lock(&f->sem);
+	f->inocache = ic;
+
+	ret = jffs2_do_read_inode_internal(c, f, &n);
+	mutex_unlock(&f->sem);
+	jffs2_do_clear_inode(c, f);
+	jffs2_xattr_do_crccheck_inode(c, ic);
+	kfree (f);
+	return ret;
+}
+
+void jffs2_do_clear_inode(struct jffs2_sb_info *c, struct jffs2_inode_info *f)
+{
+	struct jffs2_full_dirent *fd, *fds;
+	int deleted;
+
+	jffs2_xattr_delete_inode(c, f->inocache);
+	mutex_lock(&f->sem);
+	deleted = f->inocache && !f->inocache->pino_nlink;
+
+	if (f->inocache && f->inocache->state != INO_STATE_CHECKING)
+		jffs2_set_inocache_state(c, f->inocache, INO_STATE_CLEARING);
+
+	if (f->metadata) {
+		if (deleted)
+			jffs2_mark_node_obsolete(c, f->metadata->raw);
+		jffs2_free_full_dnode(f->metadata);
+	}
+
+	jffs2_kill_fragtree(&f->fragtree, deleted?c:NULL);
+
+	fds = f->dents;
+	while(fds) {
+		fd = fds;
+		fds = fd->next;
+		jffs2_free_full_dirent(fd);
+	}
+
+	if (f->inocache && f->inocache->state != INO_STATE_CHECKING) {
+		jffs2_set_inocache_state(c, f->inocache, INO_STATE_CHECKEDABSENT);
+		if (f->inocache->nodes == (void *)f->inocache)
+			jffs2_del_ino_cache(c, f->inocache);
+	}
+
+	mutex_unlock(&f->sem);
+}
diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
new file mode 100644
index 0000000000..64a5e02c21
--- /dev/null
+++ b/fs/jffs2/scan.c
@@ -0,0 +1,1157 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <crc.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mtd/mtd.h>
+#include <linux/pagemap.h>
+#include "nodelist.h"
+#include "summary.h"
+#include "debug.h"
+
+#define DEFAULT_EMPTY_SCAN_SIZE 256
+
+#define noisy_printk(noise, fmt, ...)					\
+do {									\
+	if (*(noise)) {							\
+		pr_notice(fmt, ##__VA_ARGS__);				\
+		(*(noise))--;						\
+		if (!(*(noise)))					\
+			pr_notice("Further such events for this erase block will not be printed\n"); \
+	}								\
+} while (0)
+
+static uint32_t pseudo_random;
+
+static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				  unsigned char *buf, uint32_t buf_size, struct jffs2_summary *s);
+
+/* These helper functions _must_ increase ofs and also do the dirty/used space accounting.
+ * Returning an error will abort the mount - bad checksums etc. should just mark the space
+ * as dirty.
+ */
+static int jffs2_scan_inode_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				 struct jffs2_raw_inode *ri, uint32_t ofs, struct jffs2_summary *s);
+static int jffs2_scan_dirent_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				 struct jffs2_raw_dirent *rd, uint32_t ofs, struct jffs2_summary *s);
+
+static inline int min_free(struct jffs2_sb_info *c)
+{
+	uint32_t min = 2 * sizeof(struct jffs2_raw_inode);
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+	if (!jffs2_can_mark_obsolete(c) && min < c->wbuf_pagesize)
+		return c->wbuf_pagesize;
+#endif
+	return min;
+
+}
+
+static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size) {
+	if (sector_size < DEFAULT_EMPTY_SCAN_SIZE)
+		return sector_size;
+	else
+		return DEFAULT_EMPTY_SCAN_SIZE;
+}
+
+static int file_dirty(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
+{
+	int ret;
+
+	if ((ret = jffs2_prealloc_raw_node_refs(c, jeb, 1)))
+		return ret;
+	if ((ret = jffs2_scan_dirty_space(c, jeb, jeb->free_size)))
+		return ret;
+	/* Turned wasted size into dirty, since we apparently
+	   think it's recoverable now. */
+	jeb->dirty_size += jeb->wasted_size;
+	c->dirty_size += jeb->wasted_size;
+	c->wasted_size -= jeb->wasted_size;
+	jeb->wasted_size = 0;
+	if (VERYDIRTY(c, jeb->dirty_size)) {
+		list_add(&jeb->list, &c->very_dirty_list);
+	} else {
+		list_add(&jeb->list, &c->dirty_list);
+	}
+	return 0;
+}
+
+int jffs2_scan_medium(struct jffs2_sb_info *c)
+{
+	int i, ret;
+	uint32_t empty_blocks = 0, bad_blocks = 0;
+	unsigned char *flashbuf = NULL;
+	uint32_t buf_size = 0;
+	struct jffs2_summary *s = NULL; /* summary info collected by the scan process */
+	size_t try_size;
+
+	if (!flashbuf) {
+		/* For NAND it's quicker to read a whole eraseblock at a time,
+		   apparently */
+		if (jffs2_cleanmarker_oob(c))
+			try_size = c->sector_size;
+		else
+			try_size = PAGE_SIZE;
+
+		jffs2_dbg(1, "Trying to allocate readbuf of %zu "
+			  "bytes\n", try_size);
+
+		flashbuf = kmalloc(try_size, GFP_KERNEL);
+		if (!flashbuf)
+			return -ENOMEM;
+
+		jffs2_dbg(1, "Allocated readbuf of %zu bytes\n",
+			  try_size);
+
+		buf_size = (uint32_t)try_size;
+	}
+
+	if (jffs2_sum_active()) {
+		s = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL);
+		if (!s) {
+			JFFS2_WARNING("Can't allocate memory for summary\n");
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+
+	for (i=0; i<c->nr_blocks; i++) {
+		struct jffs2_eraseblock *jeb = &c->blocks[i];
+
+		cond_resched();
+
+		/* reset summary info for next eraseblock scan */
+		jffs2_sum_reset_collected(s);
+
+		ret = jffs2_scan_eraseblock(c, jeb, buf_size ? flashbuf : (flashbuf + jeb->offset),
+					    buf_size, s);
+
+		if (ret < 0)
+			goto out;
+
+		jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
+
+		/* Now decide which list to put it on */
+		switch(ret) {
+		case BLK_STATE_ALLFF:
+			/*
+			 * Empty block.   Since we can't be sure it
+			 * was entirely erased, we just queue it for erase
+			 * again.  It will be marked as such when the erase
+			 * is complete.  Meanwhile we still count it as empty
+			 * for later checks.
+			 */
+			empty_blocks++;
+			list_add(&jeb->list, &c->erase_pending_list);
+			c->nr_erasing_blocks++;
+			break;
+
+		case BLK_STATE_CLEANMARKER:
+			/* Only a CLEANMARKER node is valid */
+			if (!jeb->dirty_size) {
+				/* It's actually free */
+				list_add(&jeb->list, &c->free_list);
+				c->nr_free_blocks++;
+			} else {
+				/* Dirt */
+				jffs2_dbg(1, "Adding all-dirty block at 0x%08x to erase_pending_list\n",
+					  jeb->offset);
+				list_add(&jeb->list, &c->erase_pending_list);
+				c->nr_erasing_blocks++;
+			}
+			break;
+
+		case BLK_STATE_CLEAN:
+			/* Full (or almost full) of clean data. Clean list */
+			list_add(&jeb->list, &c->clean_list);
+			break;
+
+		case BLK_STATE_PARTDIRTY:
+			/* Some data, but not full. Dirty list. */
+			/* We want to remember the block with most free space
+			and stick it in the 'nextblock' position to start writing to it. */
+			if (jeb->free_size > min_free(c) &&
+					(!c->nextblock || c->nextblock->free_size < jeb->free_size)) {
+				/* Better candidate for the next writes to go to */
+				if (c->nextblock) {
+					ret = file_dirty(c, c->nextblock);
+					if (ret)
+						goto out;
+					/* deleting summary information of the old nextblock */
+					jffs2_sum_reset_collected(c->summary);
+				}
+				/* update collected summary information for the current nextblock */
+				jffs2_sum_move_collected(c, s);
+				jffs2_dbg(1, "%s(): new nextblock = 0x%08x\n",
+					  __func__, jeb->offset);
+				c->nextblock = jeb;
+			} else {
+				ret = file_dirty(c, jeb);
+				if (ret)
+					goto out;
+			}
+			break;
+
+		case BLK_STATE_ALLDIRTY:
+			/* Nothing valid - not even a clean marker. Needs erasing. */
+			/* For now we just put it on the erasing list. We'll start the erases later */
+			jffs2_dbg(1, "Erase block at 0x%08x is not formatted. It will be erased\n",
+				  jeb->offset);
+			list_add(&jeb->list, &c->erase_pending_list);
+			c->nr_erasing_blocks++;
+			break;
+
+		case BLK_STATE_BADBLOCK:
+			jffs2_dbg(1, "Block at 0x%08x is bad\n", jeb->offset);
+			list_add(&jeb->list, &c->bad_list);
+			c->bad_size += c->sector_size;
+			c->free_size -= c->sector_size;
+			bad_blocks++;
+			break;
+		default:
+			pr_warn("%s(): unknown block state\n", __func__);
+			BUG();
+		}
+	}
+
+	/* Nextblock dirty is always seen as wasted, because we cannot recycle it now */
+	if (c->nextblock && (c->nextblock->dirty_size)) {
+		c->nextblock->wasted_size += c->nextblock->dirty_size;
+		c->wasted_size += c->nextblock->dirty_size;
+		c->dirty_size -= c->nextblock->dirty_size;
+		c->nextblock->dirty_size = 0;
+	}
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+	if (!jffs2_can_mark_obsolete(c) && c->wbuf_pagesize && c->nextblock && (c->nextblock->free_size % c->wbuf_pagesize)) {
+		/* If we're going to start writing into a block which already
+		   contains data, and the end of the data isn't page-aligned,
+		   skip a little and align it. */
+
+		uint32_t skip = c->nextblock->free_size % c->wbuf_pagesize;
+
+		jffs2_dbg(1, "%s(): Skipping %d bytes in nextblock to ensure page alignment\n",
+			  __func__, skip);
+		jffs2_prealloc_raw_node_refs(c, c->nextblock, 1);
+		jffs2_scan_dirty_space(c, c->nextblock, skip);
+	}
+#endif
+	if (c->nr_erasing_blocks) {
+		if ( !c->used_size && ((c->nr_free_blocks+empty_blocks+bad_blocks)!= c->nr_blocks || bad_blocks == c->nr_blocks) ) {
+			pr_notice("Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes\n");
+			pr_notice("empty_blocks %d, bad_blocks %d, c->nr_blocks %d\n",
+				  empty_blocks, bad_blocks, c->nr_blocks);
+			ret = -EIO;
+			goto out;
+		}
+	}
+	ret = 0;
+ out:
+	if (buf_size)
+		kfree(flashbuf);
+	kfree(s);
+	return ret;
+}
+
+static int jffs2_fill_scan_buf(struct jffs2_sb_info *c, void *buf,
+			       uint32_t ofs, uint32_t len)
+{
+	int ret;
+	size_t retlen;
+
+	ret = jffs2_flash_read(c, ofs, len, &retlen, buf);
+	if (ret) {
+		jffs2_dbg(1, "mtd->read(0x%x bytes from 0x%x) returned %d\n",
+			  len, ofs, ret);
+		return ret;
+	}
+	if (retlen < len) {
+		jffs2_dbg(1, "Read at 0x%x gave only 0x%zx bytes\n",
+			  ofs, retlen);
+		return -EIO;
+	}
+	return 0;
+}
+
+int jffs2_scan_classify_jeb(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb)
+{
+	if ((jeb->used_size + jeb->unchecked_size) == PAD(c->cleanmarker_size) && !jeb->dirty_size
+	    && (!jeb->first_node || !ref_next(jeb->first_node)) )
+		return BLK_STATE_CLEANMARKER;
+
+	/* move blocks with max 4 byte dirty space to cleanlist */
+	else if (!ISDIRTY(c->sector_size - (jeb->used_size + jeb->unchecked_size))) {
+		c->dirty_size -= jeb->dirty_size;
+		c->wasted_size += jeb->dirty_size;
+		jeb->wasted_size += jeb->dirty_size;
+		jeb->dirty_size = 0;
+		return BLK_STATE_CLEAN;
+	} else if (jeb->used_size || jeb->unchecked_size)
+		return BLK_STATE_PARTDIRTY;
+	else
+		return BLK_STATE_ALLDIRTY;
+}
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+static int jffs2_scan_xattr_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				 struct jffs2_raw_xattr *rx, uint32_t ofs,
+				 struct jffs2_summary *s)
+{
+	struct jffs2_xattr_datum *xd;
+	uint32_t xid, version, totlen, crc;
+	int err;
+
+	crc = crc32(0, rx, sizeof(struct jffs2_raw_xattr) - 4);
+	if (crc != je32_to_cpu(rx->node_crc)) {
+		JFFS2_WARNING("node CRC failed at %#08x, read=%#08x, calc=%#08x\n",
+			      ofs, je32_to_cpu(rx->node_crc), crc);
+		if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(rx->totlen))))
+			return err;
+		return 0;
+	}
+
+	xid = je32_to_cpu(rx->xid);
+	version = je32_to_cpu(rx->version);
+
+	totlen = PAD(sizeof(struct jffs2_raw_xattr)
+			+ rx->name_len + 1 + je16_to_cpu(rx->value_len));
+	if (totlen != je32_to_cpu(rx->totlen)) {
+		JFFS2_WARNING("node length mismatch at %#08x, read=%u, calc=%u\n",
+			      ofs, je32_to_cpu(rx->totlen), totlen);
+		if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(rx->totlen))))
+			return err;
+		return 0;
+	}
+
+	xd = jffs2_setup_xattr_datum(c, xid, version);
+	if (IS_ERR(xd))
+		return PTR_ERR(xd);
+
+	if (xd->version > version) {
+		struct jffs2_raw_node_ref *raw
+			= jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, totlen, NULL);
+		raw->next_in_ino = xd->node->next_in_ino;
+		xd->node->next_in_ino = raw;
+	} else {
+		xd->version = version;
+		xd->xprefix = rx->xprefix;
+		xd->name_len = rx->name_len;
+		xd->value_len = je16_to_cpu(rx->value_len);
+		xd->data_crc = je32_to_cpu(rx->data_crc);
+
+		jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, totlen, (void *)xd);
+	}
+
+	if (jffs2_sum_active())
+		jffs2_sum_add_xattr_mem(s, rx, ofs - jeb->offset);
+	dbg_xattr("scanning xdatum at %#08x (xid=%u, version=%u)\n",
+		  ofs, xd->xid, xd->version);
+	return 0;
+}
+
+static int jffs2_scan_xref_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				struct jffs2_raw_xref *rr, uint32_t ofs,
+				struct jffs2_summary *s)
+{
+	struct jffs2_xattr_ref *ref;
+	uint32_t crc;
+	int err;
+
+	crc = crc32(0, rr, sizeof(*rr) - 4);
+	if (crc != je32_to_cpu(rr->node_crc)) {
+		JFFS2_WARNING("node CRC failed at %#08x, read=%#08x, calc=%#08x\n",
+			      ofs, je32_to_cpu(rr->node_crc), crc);
+		if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rr->totlen)))))
+			return err;
+		return 0;
+	}
+
+	if (PAD(sizeof(struct jffs2_raw_xref)) != je32_to_cpu(rr->totlen)) {
+		JFFS2_WARNING("node length mismatch at %#08x, read=%u, calc=%zd\n",
+			      ofs, je32_to_cpu(rr->totlen),
+			      PAD(sizeof(struct jffs2_raw_xref)));
+		if ((err = jffs2_scan_dirty_space(c, jeb, je32_to_cpu(rr->totlen))))
+			return err;
+		return 0;
+	}
+
+	ref = jffs2_alloc_xattr_ref();
+	if (!ref)
+		return -ENOMEM;
+
+	/* BEFORE jffs2_build_xattr_subsystem() called,
+	 * and AFTER xattr_ref is marked as a dead xref,
+	 * ref->xid is used to store 32bit xid, xd is not used
+	 * ref->ino is used to store 32bit inode-number, ic is not used
+	 * Thoes variables are declared as union, thus using those
+	 * are exclusive. In a similar way, ref->next is temporarily
+	 * used to chain all xattr_ref object. It's re-chained to
+	 * jffs2_inode_cache in jffs2_build_xattr_subsystem() correctly.
+	 */
+	ref->ino = je32_to_cpu(rr->ino);
+	ref->xid = je32_to_cpu(rr->xid);
+	ref->xseqno = je32_to_cpu(rr->xseqno);
+	if (ref->xseqno > c->highest_xseqno)
+		c->highest_xseqno = (ref->xseqno & ~XREF_DELETE_MARKER);
+	ref->next = c->xref_temp;
+	c->xref_temp = ref;
+
+	jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, PAD(je32_to_cpu(rr->totlen)), (void *)ref);
+
+	if (jffs2_sum_active())
+		jffs2_sum_add_xref_mem(s, rr, ofs - jeb->offset);
+	dbg_xattr("scan xref at %#08x (xid=%u, ino=%u)\n",
+		  ofs, ref->xid, ref->ino);
+	return 0;
+}
+#endif
+
+/* Called with 'buf_size == 0' if buf is in fact a pointer _directly_ into
+   the flash, XIP-style */
+static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				  unsigned char *buf, uint32_t buf_size, struct jffs2_summary *s) {
+	struct jffs2_unknown_node *node;
+	struct jffs2_unknown_node crcnode;
+	uint32_t ofs, prevofs, max_ofs;
+	uint32_t hdr_crc, buf_ofs, buf_len;
+	int err;
+	int noise = 0;
+
+
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+	int cleanmarkerfound = 0;
+#endif
+
+	ofs = jeb->offset;
+	prevofs = jeb->offset - 1;
+
+	jffs2_dbg(1, "%s(): Scanning block at 0x%x\n", __func__, ofs);
+
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+	if (jffs2_cleanmarker_oob(c)) {
+		int ret;
+
+		if (mtd_block_isbad(c->mtd, jeb->offset))
+			return BLK_STATE_BADBLOCK;
+
+		ret = jffs2_check_nand_cleanmarker(c, jeb);
+		jffs2_dbg(2, "jffs_check_nand_cleanmarker returned %d\n", ret);
+
+		/* Even if it's not found, we still scan to see
+		   if the block is empty. We use this information
+		   to decide whether to erase it or not. */
+		switch (ret) {
+		case 0:		cleanmarkerfound = 1; break;
+		case 1: 	break;
+		default: 	return ret;
+		}
+	}
+#endif
+
+	if (jffs2_sum_active()) {
+		struct jffs2_sum_marker *sm;
+		void *sumptr = NULL;
+		uint32_t sumlen;
+
+		if (!buf_size) {
+			/* XIP case. Just look, point at the summary if it's there */
+			sm = (void *)buf + c->sector_size - sizeof(*sm);
+			if (je32_to_cpu(sm->magic) == JFFS2_SUM_MAGIC) {
+				sumptr = buf + je32_to_cpu(sm->offset);
+				sumlen = c->sector_size - je32_to_cpu(sm->offset);
+			}
+		} else {
+			/* If NAND flash, read a whole page of it. Else just the end */
+			if (c->wbuf_pagesize)
+				buf_len = c->wbuf_pagesize;
+			else
+				buf_len = sizeof(*sm);
+
+			/* Read as much as we want into the _end_ of the preallocated buffer */
+			err = jffs2_fill_scan_buf(c, buf + buf_size - buf_len,
+						  jeb->offset + c->sector_size - buf_len,
+						  buf_len);
+			if (err)
+				return err;
+
+			sm = (void *)buf + buf_size - sizeof(*sm);
+			if (je32_to_cpu(sm->magic) == JFFS2_SUM_MAGIC) {
+				sumlen = c->sector_size - je32_to_cpu(sm->offset);
+				sumptr = buf + buf_size - sumlen;
+
+				/* sm->offset maybe wrong but MAGIC maybe right */
+				if (sumlen > c->sector_size)
+					goto full_scan;
+
+				/* Now, make sure the summary itself is available */
+				if (sumlen > buf_size) {
+					/* Need to kmalloc for this. */
+					sumptr = kmalloc(sumlen, GFP_KERNEL);
+					if (!sumptr)
+						return -ENOMEM;
+					memcpy(sumptr + sumlen - buf_len, buf + buf_size - buf_len, buf_len);
+				}
+				if (buf_len < sumlen) {
+					/* Need to read more so that the entire summary node is present */
+					err = jffs2_fill_scan_buf(c, sumptr,
+								  jeb->offset + c->sector_size - sumlen,
+								  sumlen - buf_len);
+					if (err) {
+						if (sumlen > buf_size)
+							kfree(sumptr);
+						return err;
+					}
+				}
+			}
+
+		}
+
+		if (sumptr) {
+			err = jffs2_sum_scan_sumnode(c, jeb, sumptr, sumlen, &pseudo_random);
+
+			if (buf_size && sumlen > buf_size)
+				kfree(sumptr);
+			/* If it returns with a real error, bail.
+			   If it returns positive, that's a block classification
+			   (i.e. BLK_STATE_xxx) so return that too.
+			   If it returns zero, fall through to full scan. */
+			if (err)
+				return err;
+		}
+	}
+
+full_scan:
+	buf_ofs = jeb->offset;
+
+	if (!buf_size) {
+		/* This is the XIP case -- we're reading _directly_ from the flash chip */
+		buf_len = c->sector_size;
+	} else {
+		buf_len = EMPTY_SCAN_SIZE(c->sector_size);
+		err = jffs2_fill_scan_buf(c, buf, buf_ofs, buf_len);
+		if (err)
+			return err;
+	}
+
+	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+	ofs = 0;
+	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
+	/* Scan only EMPTY_SCAN_SIZE of 0xFF before declaring it's empty */
+	while(ofs < max_ofs && *(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF)
+		ofs += 4;
+
+	if (ofs == max_ofs) {
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+		if (jffs2_cleanmarker_oob(c)) {
+			/* scan oob, take care of cleanmarker */
+			int ret = jffs2_check_oob_empty(c, jeb, cleanmarkerfound);
+			jffs2_dbg(2, "jffs2_check_oob_empty returned %d\n",
+				  ret);
+			switch (ret) {
+			case 0:		return cleanmarkerfound ? BLK_STATE_CLEANMARKER : BLK_STATE_ALLFF;
+			case 1: 	return BLK_STATE_ALLDIRTY;
+			default: 	return ret;
+			}
+		}
+#endif
+		jffs2_dbg(1, "Block at 0x%08x is empty (erased)\n",
+			  jeb->offset);
+		if (c->cleanmarker_size == 0)
+			return BLK_STATE_CLEANMARKER;	/* don't bother with re-erase */
+		else
+			return BLK_STATE_ALLFF;	/* OK to erase if all blocks are like this */
+	}
+	if (ofs) {
+		jffs2_dbg(1, "Free space at %08x ends at %08x\n", jeb->offset,
+			  jeb->offset + ofs);
+		if ((err = jffs2_prealloc_raw_node_refs(c, jeb, 1)))
+			return err;
+		if ((err = jffs2_scan_dirty_space(c, jeb, ofs)))
+			return err;
+	}
+
+	/* Now ofs is a complete physical flash offset as it always was... */
+	ofs += jeb->offset;
+
+	noise = 10;
+
+	dbg_summary("no summary found in jeb 0x%08x. Apply original scan.\n",jeb->offset);
+
+scan_more:
+	while(ofs < jeb->offset + c->sector_size) {
+
+		jffs2_dbg_acct_paranoia_check_nolock(c, jeb);
+
+		/* Make sure there are node refs available for use */
+		err = jffs2_prealloc_raw_node_refs(c, jeb, 2);
+		if (err)
+			return err;
+
+		cond_resched();
+
+		if (ofs & 3) {
+			pr_warn("Eep. ofs 0x%08x not word-aligned!\n", ofs);
+			ofs = PAD(ofs);
+			continue;
+		}
+		if (ofs == prevofs) {
+			pr_warn("ofs 0x%08x has already been seen. Skipping\n",
+				ofs);
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+		prevofs = ofs;
+
+		if (jeb->offset + c->sector_size < ofs + sizeof(*node)) {
+			jffs2_dbg(1, "Fewer than %zd bytes left to end of block. (%x+%x<%x+%zx) Not reading\n",
+				  sizeof(struct jffs2_unknown_node),
+				  jeb->offset, c->sector_size, ofs,
+				  sizeof(*node));
+			if ((err = jffs2_scan_dirty_space(c, jeb, (jeb->offset + c->sector_size)-ofs)))
+				return err;
+			break;
+		}
+
+		if (buf_ofs + buf_len < ofs + sizeof(*node)) {
+			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+			jffs2_dbg(1, "Fewer than %zd bytes (node header) left to end of buf. Reading 0x%x at 0x%08x\n",
+				  sizeof(struct jffs2_unknown_node),
+				  buf_len, ofs);
+			err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
+			if (err)
+				return err;
+			buf_ofs = ofs;
+		}
+
+		node = (struct jffs2_unknown_node *)&buf[ofs-buf_ofs];
+
+		if (*(uint32_t *)(&buf[ofs-buf_ofs]) == 0xffffffff) {
+			uint32_t inbuf_ofs;
+			uint32_t empty_start, scan_end;
+
+			empty_start = ofs;
+			ofs += 4;
+			scan_end = min_t(uint32_t, EMPTY_SCAN_SIZE(c->sector_size)/8, buf_len);
+
+			jffs2_dbg(1, "Found empty flash at 0x%08x\n", ofs);
+		more_empty:
+			inbuf_ofs = ofs - buf_ofs;
+			while (inbuf_ofs < scan_end) {
+				if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) {
+					jffs2_dbg(1,"Empty flash at 0x%08x ends at 0x%08x\n",
+						empty_start, ofs);
+					if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start)))
+						return err;
+					goto scan_more;
+				}
+
+				inbuf_ofs+=4;
+				ofs += 4;
+			}
+			/* Ran off end. */
+			jffs2_dbg(1, "Empty flash to end of buffer at 0x%08x\n",
+				  ofs);
+
+			/* If we're only checking the beginning of a block with a cleanmarker,
+			   bail now */
+			if (buf_ofs == jeb->offset && jeb->used_size == PAD(c->cleanmarker_size) &&
+			    c->cleanmarker_size && !jeb->dirty_size && !ref_next(jeb->first_node)) {
+				jffs2_dbg(1, "%d bytes at start of block seems clean... assuming all clean\n",
+					  EMPTY_SCAN_SIZE(c->sector_size));
+				return BLK_STATE_CLEANMARKER;
+			}
+			if (!buf_size && (scan_end != buf_len)) {/* XIP/point case */
+				scan_end = buf_len;
+				goto more_empty;
+			}
+
+			/* See how much more there is to read in this eraseblock... */
+			buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+			if (!buf_len) {
+				/* No more to read. Break out of main loop without marking
+				   this range of empty space as dirty (because it's not) */
+				jffs2_dbg(1, "Empty flash at %08x runs to end of block. Treating as free_space\n",
+					  empty_start);
+				break;
+			}
+			/* point never reaches here */
+			scan_end = buf_len;
+			jffs2_dbg(1, "Reading another 0x%x at 0x%08x\n",
+				  buf_len, ofs);
+			err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
+			if (err)
+				return err;
+			buf_ofs = ofs;
+			goto more_empty;
+		}
+
+		if (ofs == jeb->offset && je16_to_cpu(node->magic) == KSAMTIB_CIGAM_2SFFJ) {
+			pr_warn("Magic bitmask is backwards at offset 0x%08x. Wrong endian filesystem?\n",
+				ofs);
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+		if (je16_to_cpu(node->magic) == JFFS2_DIRTY_BITMASK) {
+			jffs2_dbg(1, "Dirty bitmask at 0x%08x\n", ofs);
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+		if (je16_to_cpu(node->magic) == JFFS2_OLD_MAGIC_BITMASK) {
+			pr_warn("Old JFFS2 bitmask found at 0x%08x\n", ofs);
+			pr_warn("You cannot use older JFFS2 filesystems with newer kernels\n");
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+		if (je16_to_cpu(node->magic) != JFFS2_MAGIC_BITMASK) {
+			/* OK. We're out of possibilities. Whinge and move on */
+			noisy_printk(&noise, "%s(): Magic bitmask 0x%04x not found at 0x%08x: 0x%04x instead\n",
+				     __func__,
+				     JFFS2_MAGIC_BITMASK, ofs,
+				     je16_to_cpu(node->magic));
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+		/* We seem to have a node of sorts. Check the CRC */
+		crcnode.magic = node->magic;
+		crcnode.nodetype = cpu_to_je16( je16_to_cpu(node->nodetype) | JFFS2_NODE_ACCURATE);
+		crcnode.totlen = node->totlen;
+		hdr_crc = crc32(0, &crcnode, sizeof(crcnode)-4);
+
+		if (hdr_crc != je32_to_cpu(node->hdr_crc)) {
+			noisy_printk(&noise, "%s(): Node at 0x%08x {0x%04x, 0x%04x, 0x%08x) has invalid CRC 0x%08x (calculated 0x%08x)\n",
+				     __func__,
+				     ofs, je16_to_cpu(node->magic),
+				     je16_to_cpu(node->nodetype),
+				     je32_to_cpu(node->totlen),
+				     je32_to_cpu(node->hdr_crc),
+				     hdr_crc);
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+
+		if (ofs + je32_to_cpu(node->totlen) > jeb->offset + c->sector_size) {
+			/* Eep. Node goes over the end of the erase block. */
+			pr_warn("Node at 0x%08x with length 0x%08x would run over the end of the erase block\n",
+				ofs, je32_to_cpu(node->totlen));
+			pr_warn("Perhaps the file system was created with the wrong erase size?\n");
+			if ((err = jffs2_scan_dirty_space(c, jeb, 4)))
+				return err;
+			ofs += 4;
+			continue;
+		}
+
+		if (!(je16_to_cpu(node->nodetype) & JFFS2_NODE_ACCURATE)) {
+			/* Wheee. This is an obsoleted node */
+			jffs2_dbg(2, "Node at 0x%08x is obsolete. Skipping\n",
+				  ofs);
+			if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
+				return err;
+			ofs += PAD(je32_to_cpu(node->totlen));
+			continue;
+		}
+
+		switch(je16_to_cpu(node->nodetype)) {
+		case JFFS2_NODETYPE_INODE:
+			if (buf_ofs + buf_len < ofs + sizeof(struct jffs2_raw_inode)) {
+				buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+				jffs2_dbg(1, "Fewer than %zd bytes (inode node) left to end of buf. Reading 0x%x at 0x%08x\n",
+					  sizeof(struct jffs2_raw_inode),
+					  buf_len, ofs);
+				err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
+				if (err)
+					return err;
+				buf_ofs = ofs;
+				node = (void *)buf;
+			}
+			err = jffs2_scan_inode_node(c, jeb, (void *)node, ofs, s);
+			if (err) return err;
+			ofs += PAD(je32_to_cpu(node->totlen));
+			break;
+
+		case JFFS2_NODETYPE_DIRENT:
+			if (buf_ofs + buf_len < ofs + je32_to_cpu(node->totlen)) {
+				buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+				jffs2_dbg(1, "Fewer than %d bytes (dirent node) left to end of buf. Reading 0x%x at 0x%08x\n",
+					  je32_to_cpu(node->totlen), buf_len,
+					  ofs);
+				err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
+				if (err)
+					return err;
+				buf_ofs = ofs;
+				node = (void *)buf;
+			}
+			err = jffs2_scan_dirent_node(c, jeb, (void *)node, ofs, s);
+			if (err) return err;
+			ofs += PAD(je32_to_cpu(node->totlen));
+			break;
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+		case JFFS2_NODETYPE_XATTR:
+			if (buf_ofs + buf_len < ofs + je32_to_cpu(node->totlen)) {
+				buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+				jffs2_dbg(1, "Fewer than %d bytes (xattr node) left to end of buf. Reading 0x%x at 0x%08x\n",
+					  je32_to_cpu(node->totlen), buf_len,
+					  ofs);
+				err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
+				if (err)
+					return err;
+				buf_ofs = ofs;
+				node = (void *)buf;
+			}
+			err = jffs2_scan_xattr_node(c, jeb, (void *)node, ofs, s);
+			if (err)
+				return err;
+			ofs += PAD(je32_to_cpu(node->totlen));
+			break;
+		case JFFS2_NODETYPE_XREF:
+			if (buf_ofs + buf_len < ofs + je32_to_cpu(node->totlen)) {
+				buf_len = min_t(uint32_t, buf_size, jeb->offset + c->sector_size - ofs);
+				jffs2_dbg(1, "Fewer than %d bytes (xref node) left to end of buf. Reading 0x%x at 0x%08x\n",
+					  je32_to_cpu(node->totlen), buf_len,
+					  ofs);
+				err = jffs2_fill_scan_buf(c, buf, ofs, buf_len);
+				if (err)
+					return err;
+				buf_ofs = ofs;
+				node = (void *)buf;
+			}
+			err = jffs2_scan_xref_node(c, jeb, (void *)node, ofs, s);
+			if (err)
+				return err;
+			ofs += PAD(je32_to_cpu(node->totlen));
+			break;
+#endif	/* CONFIG_JFFS2_FS_XATTR */
+
+		case JFFS2_NODETYPE_CLEANMARKER:
+			jffs2_dbg(1, "CLEANMARKER node found at 0x%08x\n", ofs);
+			if (je32_to_cpu(node->totlen) != c->cleanmarker_size) {
+				jffs2_dbg(1, "CLEANMARKER node found at 0x%08x has totlen 0x%x != normal 0x%x\n",
+					  ofs, je32_to_cpu(node->totlen),
+					  c->cleanmarker_size);
+				if ((err = jffs2_scan_dirty_space(c, jeb, PAD(sizeof(struct jffs2_unknown_node)))))
+					return err;
+				ofs += PAD(sizeof(struct jffs2_unknown_node));
+			} else if (jeb->first_node) {
+				jffs2_dbg(1, "CLEANMARKER node found at 0x%08x, not first node in block (0x%08x)\n",
+					  ofs, jeb->offset);
+				if ((err = jffs2_scan_dirty_space(c, jeb, PAD(sizeof(struct jffs2_unknown_node)))))
+					return err;
+				ofs += PAD(sizeof(struct jffs2_unknown_node));
+			} else {
+				jffs2_link_node_ref(c, jeb, ofs | REF_NORMAL, c->cleanmarker_size, NULL);
+
+				ofs += PAD(c->cleanmarker_size);
+			}
+			break;
+
+		case JFFS2_NODETYPE_PADDING:
+			if (jffs2_sum_active())
+				jffs2_sum_add_padding_mem(s, je32_to_cpu(node->totlen));
+			if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
+				return err;
+			ofs += PAD(je32_to_cpu(node->totlen));
+			break;
+
+		default:
+			switch (je16_to_cpu(node->nodetype) & JFFS2_COMPAT_MASK) {
+			case JFFS2_FEATURE_ROCOMPAT:
+				pr_notice("Read-only compatible feature node (0x%04x) found at offset 0x%08x\n",
+					  je16_to_cpu(node->nodetype), ofs);
+				c->flags |= JFFS2_SB_FLAG_RO;
+				if (!(jffs2_is_readonly(c)))
+					return -EROFS;
+				if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
+					return err;
+				ofs += PAD(je32_to_cpu(node->totlen));
+				break;
+
+			case JFFS2_FEATURE_INCOMPAT:
+				pr_notice("Incompatible feature node (0x%04x) found at offset 0x%08x\n",
+					  je16_to_cpu(node->nodetype), ofs);
+				return -EINVAL;
+
+			case JFFS2_FEATURE_RWCOMPAT_DELETE:
+				jffs2_dbg(1, "Unknown but compatible feature node (0x%04x) found at offset 0x%08x\n",
+					  je16_to_cpu(node->nodetype), ofs);
+				if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(node->totlen)))))
+					return err;
+				ofs += PAD(je32_to_cpu(node->totlen));
+				break;
+
+			case JFFS2_FEATURE_RWCOMPAT_COPY: {
+				jffs2_dbg(1, "Unknown but compatible feature node (0x%04x) found at offset 0x%08x\n",
+					  je16_to_cpu(node->nodetype), ofs);
+
+				jffs2_link_node_ref(c, jeb, ofs | REF_PRISTINE, PAD(je32_to_cpu(node->totlen)), NULL);
+
+				/* We can't summarise nodes we don't grok */
+				jffs2_sum_disable_collecting(s);
+				ofs += PAD(je32_to_cpu(node->totlen));
+				break;
+				}
+			}
+		}
+	}
+
+	if (jffs2_sum_active()) {
+		if (PAD(s->sum_size + JFFS2_SUMMARY_FRAME_SIZE) > jeb->free_size) {
+			dbg_summary("There is not enough space for "
+				"summary information, disabling for this jeb!\n");
+			jffs2_sum_disable_collecting(s);
+		}
+	}
+
+	jffs2_dbg(1, "Block at 0x%08x: free 0x%08x, dirty 0x%08x, unchecked 0x%08x, used 0x%08x, wasted 0x%08x\n",
+		  jeb->offset, jeb->free_size, jeb->dirty_size,
+		  jeb->unchecked_size, jeb->used_size, jeb->wasted_size);
+
+	/* mark_node_obsolete can add to wasted !! */
+	if (jeb->wasted_size) {
+		jeb->dirty_size += jeb->wasted_size;
+		c->dirty_size += jeb->wasted_size;
+		c->wasted_size -= jeb->wasted_size;
+		jeb->wasted_size = 0;
+	}
+
+	return jffs2_scan_classify_jeb(c, jeb);
+}
+
+struct jffs2_inode_cache *jffs2_scan_make_ino_cache(struct jffs2_sb_info *c, uint32_t ino)
+{
+	struct jffs2_inode_cache *ic;
+
+	ic = jffs2_get_ino_cache(c, ino);
+	if (ic)
+		return ic;
+
+	if (ino > c->highest_ino)
+		c->highest_ino = ino;
+
+	ic = jffs2_alloc_inode_cache();
+	if (!ic) {
+		pr_notice("%s(): allocation of inode cache failed\n", __func__);
+		return NULL;
+	}
+	memset(ic, 0, sizeof(*ic));
+
+	ic->ino = ino;
+	ic->nodes = (void *)ic;
+	jffs2_add_ino_cache(c, ic);
+	if (ino == 1)
+		ic->pino_nlink = 1;
+	return ic;
+}
+
+static int jffs2_scan_inode_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				 struct jffs2_raw_inode *ri, uint32_t ofs, struct jffs2_summary *s)
+{
+	struct jffs2_inode_cache *ic;
+	uint32_t crc, ino = je32_to_cpu(ri->ino);
+
+	jffs2_dbg(1, "%s(): Node at 0x%08x\n", __func__, ofs);
+
+	/* We do very little here now. Just check the ino# to which we should attribute
+	   this node; we can do all the CRC checking etc. later. There's a tradeoff here --
+	   we used to scan the flash once only, reading everything we want from it into
+	   memory, then building all our in-core data structures and freeing the extra
+	   information. Now we allow the first part of the mount to complete a lot quicker,
+	   but we have to go _back_ to the flash in order to finish the CRC checking, etc.
+	   Which means that the _full_ amount of time to get to proper write mode with GC
+	   operational may actually be _longer_ than before. Sucks to be me. */
+
+	/* Check the node CRC in any case. */
+	crc = crc32(0, ri, sizeof(*ri)-8);
+	if (crc != je32_to_cpu(ri->node_crc)) {
+		pr_notice("%s(): CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",
+			  __func__, ofs, je32_to_cpu(ri->node_crc), crc);
+		/*
+		 * We believe totlen because the CRC on the node
+		 * _header_ was OK, just the node itself failed.
+		 */
+		return jffs2_scan_dirty_space(c, jeb,
+					      PAD(je32_to_cpu(ri->totlen)));
+	}
+
+	ic = jffs2_get_ino_cache(c, ino);
+	if (!ic) {
+		ic = jffs2_scan_make_ino_cache(c, ino);
+		if (!ic)
+			return -ENOMEM;
+	}
+
+	/* Wheee. It worked */
+	jffs2_link_node_ref(c, jeb, ofs | REF_UNCHECKED, PAD(je32_to_cpu(ri->totlen)), ic);
+
+	jffs2_dbg(1, "Node is ino #%u, version %d. Range 0x%x-0x%x\n",
+		  je32_to_cpu(ri->ino), je32_to_cpu(ri->version),
+		  je32_to_cpu(ri->offset),
+		  je32_to_cpu(ri->offset)+je32_to_cpu(ri->dsize));
+
+	pseudo_random += je32_to_cpu(ri->version);
+
+	if (jffs2_sum_active()) {
+		jffs2_sum_add_inode_mem(s, ri, ofs - jeb->offset);
+	}
+
+	return 0;
+}
+
+static int jffs2_scan_dirent_node(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+				  struct jffs2_raw_dirent *rd, uint32_t ofs, struct jffs2_summary *s)
+{
+	struct jffs2_full_dirent *fd;
+	struct jffs2_inode_cache *ic;
+	uint32_t checkedlen;
+	uint32_t crc;
+	int err;
+
+	jffs2_dbg(1, "%s(): Node at 0x%08x\n", __func__, ofs);
+
+	/* We don't get here unless the node is still valid, so we don't have to
+	   mask in the ACCURATE bit any more. */
+	crc = crc32(0, rd, sizeof(*rd)-8);
+
+	if (crc != je32_to_cpu(rd->node_crc)) {
+		pr_notice("%s(): Node CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",
+			  __func__, ofs, je32_to_cpu(rd->node_crc), crc);
+		/* We believe totlen because the CRC on the node _header_ was OK, just the node itself failed. */
+		if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rd->totlen)))))
+			return err;
+		return 0;
+	}
+
+	pseudo_random += je32_to_cpu(rd->version);
+
+	/* Should never happen. Did. (OLPC trac #4184)*/
+	checkedlen = strnlen(rd->name, rd->nsize);
+	if (checkedlen < rd->nsize) {
+		pr_err("Dirent at %08x has zeroes in name. Truncating to %d chars\n",
+		       ofs, checkedlen);
+	}
+	fd = jffs2_alloc_full_dirent(checkedlen+1);
+	if (!fd) {
+		return -ENOMEM;
+	}
+	memcpy(&fd->name, rd->name, checkedlen);
+	fd->name[checkedlen] = 0;
+
+	crc = crc32(0, fd->name, rd->nsize);
+	if (crc != je32_to_cpu(rd->name_crc)) {
+		pr_notice("%s(): Name CRC failed on node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",
+			  __func__, ofs, je32_to_cpu(rd->name_crc), crc);
+		jffs2_dbg(1, "Name for which CRC failed is (now) '%s', ino #%d\n",
+			  fd->name, je32_to_cpu(rd->ino));
+		jffs2_free_full_dirent(fd);
+		/* FIXME: Why do we believe totlen? */
+		/* We believe totlen because the CRC on the node _header_ was OK, just the name failed. */
+		if ((err = jffs2_scan_dirty_space(c, jeb, PAD(je32_to_cpu(rd->totlen)))))
+			return err;
+		return 0;
+	}
+	ic = jffs2_scan_make_ino_cache(c, je32_to_cpu(rd->pino));
+	if (!ic) {
+		jffs2_free_full_dirent(fd);
+		return -ENOMEM;
+	}
+
+	fd->raw = jffs2_link_node_ref(c, jeb, ofs | dirent_node_state(rd),
+				      PAD(je32_to_cpu(rd->totlen)), ic);
+
+	fd->next = NULL;
+	fd->version = je32_to_cpu(rd->version);
+	fd->ino = je32_to_cpu(rd->ino);
+	fd->nhash = full_name_hash(NULL, fd->name, checkedlen);
+	fd->type = rd->type;
+	jffs2_add_fd_to_list(c, fd, &ic->scan_dents);
+
+	if (jffs2_sum_active()) {
+		jffs2_sum_add_dirent_mem(s, rd, ofs - jeb->offset);
+	}
+
+	return 0;
+}
+
+static int count_list(struct list_head *l)
+{
+	uint32_t count = 0;
+	struct list_head *tmp;
+
+	list_for_each(tmp, l) {
+		count++;
+	}
+	return count;
+}
+
+/* Note: This breaks if list_empty(head). I don't care. You
+   might, if you copy this code and use it elsewhere :) */
+static void rotate_list(struct list_head *head, uint32_t count)
+{
+	struct list_head *n = head->next;
+
+	list_del(head);
+	while(count--) {
+		n = n->next;
+	}
+	list_add(head, n);
+}
+
+void jffs2_rotate_lists(struct jffs2_sb_info *c)
+{
+	uint32_t x;
+	uint32_t rotateby;
+
+	x = count_list(&c->clean_list);
+	if (x) {
+		rotateby = pseudo_random % x;
+		rotate_list((&c->clean_list), rotateby);
+	}
+
+	x = count_list(&c->very_dirty_list);
+	if (x) {
+		rotateby = pseudo_random % x;
+		rotate_list((&c->very_dirty_list), rotateby);
+	}
+
+	x = count_list(&c->dirty_list);
+	if (x) {
+		rotateby = pseudo_random % x;
+		rotate_list((&c->dirty_list), rotateby);
+	}
+
+	x = count_list(&c->erasable_list);
+	if (x) {
+		rotateby = pseudo_random % x;
+		rotate_list((&c->erasable_list), rotateby);
+	}
+
+	if (c->nr_erasing_blocks) {
+		rotateby = pseudo_random % c->nr_erasing_blocks;
+		rotate_list((&c->erase_pending_list), rotateby);
+	}
+
+	if (c->nr_free_blocks) {
+		rotateby = pseudo_random % c->nr_free_blocks;
+		rotate_list((&c->free_list), rotateby);
+	}
+}
diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h
new file mode 100644
index 0000000000..a4b4747825
--- /dev/null
+++ b/fs/jffs2/summary.h
@@ -0,0 +1,212 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2004  Ferenc Havasi <havasi@inf.u-szeged.hu>,
+ *		     Zoltan Sogor <weth@inf.u-szeged.hu>,
+ *		     Patrik Kluba <pajko@halom.u-szeged.hu>,
+ *		     University of Szeged, Hungary
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef JFFS2_SUMMARY_H
+#define JFFS2_SUMMARY_H
+
+/* Limit summary size to 64KiB so that we can kmalloc it. If the summary
+   is larger than that, we have to just ditch it and avoid using summary
+   for the eraseblock in question... and it probably doesn't hurt us much
+   anyway. */
+#define MAX_SUMMARY_SIZE 65536
+
+#include <linux/jffs2.h>
+
+#define BLK_STATE_ALLFF		0
+#define BLK_STATE_CLEAN		1
+#define BLK_STATE_PARTDIRTY	2
+#define BLK_STATE_CLEANMARKER	3
+#define BLK_STATE_ALLDIRTY	4
+#define BLK_STATE_BADBLOCK	5
+
+#define JFFS2_SUMMARY_NOSUM_SIZE 0xffffffff
+#define JFFS2_SUMMARY_INODE_SIZE (sizeof(struct jffs2_sum_inode_flash))
+#define JFFS2_SUMMARY_DIRENT_SIZE(x) (sizeof(struct jffs2_sum_dirent_flash) + (x))
+#define JFFS2_SUMMARY_XATTR_SIZE (sizeof(struct jffs2_sum_xattr_flash))
+#define JFFS2_SUMMARY_XREF_SIZE (sizeof(struct jffs2_sum_xref_flash))
+
+/* Summary structures used on flash */
+
+struct jffs2_sum_unknown_flash
+{
+	jint16_t nodetype;	/* node type */
+};
+
+struct jffs2_sum_inode_flash
+{
+	jint16_t nodetype;	/* node type */
+	jint32_t inode;		/* inode number */
+	jint32_t version;	/* inode version */
+	jint32_t offset;	/* offset on jeb */
+	jint32_t totlen; 	/* record length */
+} __attribute__((packed));
+
+struct jffs2_sum_dirent_flash
+{
+	jint16_t nodetype;	/* == JFFS_NODETYPE_DIRENT */
+	jint32_t totlen;	/* record length */
+	jint32_t offset;	/* offset on jeb */
+	jint32_t pino;		/* parent inode */
+	jint32_t version;	/* dirent version */
+	jint32_t ino; 		/* == zero for unlink */
+	uint8_t nsize;		/* dirent name size */
+	uint8_t type;		/* dirent type */
+	uint8_t name[0];	/* dirent name */
+} __attribute__((packed));
+
+struct jffs2_sum_xattr_flash
+{
+	jint16_t nodetype;	/* == JFFS2_NODETYPE_XATR */
+	jint32_t xid;		/* xattr identifier */
+	jint32_t version;	/* version number */
+	jint32_t offset;	/* offset on jeb */
+	jint32_t totlen;	/* node length */
+} __attribute__((packed));
+
+struct jffs2_sum_xref_flash
+{
+	jint16_t nodetype;	/* == JFFS2_NODETYPE_XREF */
+	jint32_t offset;	/* offset on jeb */
+} __attribute__((packed));
+
+union jffs2_sum_flash
+{
+	struct jffs2_sum_unknown_flash u;
+	struct jffs2_sum_inode_flash i;
+	struct jffs2_sum_dirent_flash d;
+	struct jffs2_sum_xattr_flash x;
+	struct jffs2_sum_xref_flash r;
+};
+
+/* Summary structures used in the memory */
+
+struct jffs2_sum_unknown_mem
+{
+	union jffs2_sum_mem *next;
+	jint16_t nodetype;	/* node type */
+};
+
+struct jffs2_sum_inode_mem
+{
+	union jffs2_sum_mem *next;
+	jint16_t nodetype;	/* node type */
+	jint32_t inode;		/* inode number */
+	jint32_t version;	/* inode version */
+	jint32_t offset;	/* offset on jeb */
+	jint32_t totlen; 	/* record length */
+} __attribute__((packed));
+
+struct jffs2_sum_dirent_mem
+{
+	union jffs2_sum_mem *next;
+	jint16_t nodetype;	/* == JFFS_NODETYPE_DIRENT */
+	jint32_t totlen;	/* record length */
+	jint32_t offset;	/* ofset on jeb */
+	jint32_t pino;		/* parent inode */
+	jint32_t version;	/* dirent version */
+	jint32_t ino; 		/* == zero for unlink */
+	uint8_t nsize;		/* dirent name size */
+	uint8_t type;		/* dirent type */
+	uint8_t name[0];	/* dirent name */
+} __attribute__((packed));
+
+struct jffs2_sum_xattr_mem
+{
+	union jffs2_sum_mem *next;
+	jint16_t nodetype;
+	jint32_t xid;
+	jint32_t version;
+	jint32_t offset;
+	jint32_t totlen;
+} __attribute__((packed));
+
+struct jffs2_sum_xref_mem
+{
+	union jffs2_sum_mem *next;
+	jint16_t nodetype;
+	jint32_t offset;
+} __attribute__((packed));
+
+union jffs2_sum_mem
+{
+	struct jffs2_sum_unknown_mem u;
+	struct jffs2_sum_inode_mem i;
+	struct jffs2_sum_dirent_mem d;
+	struct jffs2_sum_xattr_mem x;
+	struct jffs2_sum_xref_mem r;
+};
+
+/* Summary related information stored in superblock */
+
+struct jffs2_summary
+{
+	uint32_t sum_size;      /* collected summary information for nextblock */
+	uint32_t sum_num;
+	uint32_t sum_padded;
+	union jffs2_sum_mem *sum_list_head;
+	union jffs2_sum_mem *sum_list_tail;
+
+	jint32_t *sum_buf;	/* buffer for writing out summary */
+};
+
+/* Summary marker is stored at the end of every sumarized erase block */
+
+struct jffs2_sum_marker
+{
+	jint32_t offset;	/* offset of the summary node in the jeb */
+	jint32_t magic; 	/* == JFFS2_SUM_MAGIC */
+};
+
+#define JFFS2_SUMMARY_FRAME_SIZE (sizeof(struct jffs2_raw_summary) + sizeof(struct jffs2_sum_marker))
+
+#ifdef CONFIG_JFFS2_SUMMARY	/* SUMMARY SUPPORT ENABLED */
+
+#define jffs2_sum_active() (1)
+int jffs2_sum_init(struct jffs2_sb_info *c);
+void jffs2_sum_exit(struct jffs2_sb_info *c);
+void jffs2_sum_disable_collecting(struct jffs2_summary *s);
+int jffs2_sum_is_disabled(struct jffs2_summary *s);
+void jffs2_sum_reset_collected(struct jffs2_summary *s);
+void jffs2_sum_move_collected(struct jffs2_sb_info *c, struct jffs2_summary *s);
+int jffs2_sum_add_kvec(struct jffs2_sb_info *c, const struct kvec *invecs,
+			unsigned long count,  uint32_t to);
+int jffs2_sum_write_sumnode(struct jffs2_sb_info *c);
+int jffs2_sum_add_padding_mem(struct jffs2_summary *s, uint32_t size);
+int jffs2_sum_add_inode_mem(struct jffs2_summary *s, struct jffs2_raw_inode *ri, uint32_t ofs);
+int jffs2_sum_add_dirent_mem(struct jffs2_summary *s, struct jffs2_raw_dirent *rd, uint32_t ofs);
+int jffs2_sum_add_xattr_mem(struct jffs2_summary *s, struct jffs2_raw_xattr *rx, uint32_t ofs);
+int jffs2_sum_add_xref_mem(struct jffs2_summary *s, struct jffs2_raw_xref *rr, uint32_t ofs);
+int jffs2_sum_scan_sumnode(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb,
+			   struct jffs2_raw_summary *summary, uint32_t sumlen,
+			   uint32_t *pseudo_random);
+
+#else				/* SUMMARY DISABLED */
+
+#define jffs2_sum_active() (0)
+#define jffs2_sum_init(a) (0)
+#define jffs2_sum_exit(a)
+#define jffs2_sum_disable_collecting(a)
+#define jffs2_sum_is_disabled(a) (0)
+#define jffs2_sum_reset_collected(a)
+#define jffs2_sum_add_kvec(a,b,c,d) (0)
+#define jffs2_sum_move_collected(a,b)
+#define jffs2_sum_write_sumnode(a) (0)
+#define jffs2_sum_add_padding_mem(a,b)
+#define jffs2_sum_add_inode_mem(a,b,c)
+#define jffs2_sum_add_dirent_mem(a,b,c)
+#define jffs2_sum_add_xattr_mem(a,b,c)
+#define jffs2_sum_add_xref_mem(a,b,c)
+#define jffs2_sum_scan_sumnode(a,b,c,d,e) (0)
+
+#endif /* CONFIG_JFFS2_SUMMARY */
+
+#endif /* JFFS2_SUMMARY_H */
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
new file mode 100644
index 0000000000..d9bb6d0bff
--- /dev/null
+++ b/fs/jffs2/super.c
@@ -0,0 +1,130 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <common.h>
+#include <init.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <fs.h>
+#include <linux/err.h>
+#include <linux/mount.h>
+#include <linux/jffs2.h>
+#include <linux/pagemap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/ctype.h>
+#include <linux/namei.h>
+#include "compr.h"
+#include "nodelist.h"
+
+static struct kmem_cache *jffs2_inode_cachep;
+
+/* from include/linux/fs.h */
+static inline void i_uid_write(struct inode *inode, uid_t uid)
+{
+	inode->i_uid = uid;
+}
+
+static inline void i_gid_write(struct inode *inode, gid_t gid)
+{
+	inode->i_gid = gid;
+}
+
+
+static struct inode *jffs2_alloc_inode(struct super_block *sb)
+{
+	struct jffs2_inode_info *f;
+
+	f = kmem_cache_alloc(jffs2_inode_cachep, GFP_KERNEL);
+	if (!f)
+		return NULL;
+	return &f->vfs_inode;
+}
+
+static void jffs2_destroy_inode(struct inode *inode)
+{
+	struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+
+	kfree(f->target);
+	kmem_cache_free(jffs2_inode_cachep, f);
+}
+
+static void jffs2_i_init_once(void *foo)
+{
+}
+
+static const struct super_operations jffs2_super_operations =
+{
+	.alloc_inode	= jffs2_alloc_inode,
+	.destroy_inode	= jffs2_destroy_inode,
+};
+
+/*
+ * fill in the superblock
+ */
+int jffs2_fill_super(struct fs_device_d *fsdev, int silent)
+{
+	struct super_block *sb = &fsdev->sb;
+	struct jffs2_sb_info *c = sb->s_fs_info;
+
+	c->os_priv = sb;
+
+	/* Initialize JFFS2 superblock locks, the further initialization will
+	 * be done later */
+	mutex_init(&c->alloc_sem);
+	mutex_init(&c->erase_free_sem);
+	init_waitqueue_head(&c->erase_wait);
+	init_waitqueue_head(&c->inocache_wq);
+	spin_lock_init(&c->erase_completion_lock);
+	spin_lock_init(&c->inocache_lock);
+
+	sb->s_op = &jffs2_super_operations;
+	sb->s_flags = sb->s_flags | SB_NOATIME;
+	sb->s_xattr = jffs2_xattr_handlers;
+
+	return jffs2_do_fill_super(sb, silent);
+}
+
+static int __init init_jffs2_fs(void)
+{
+	/* Paranoia checks for on-medium structures. If we ask GCC
+	   to pack them with __attribute__((packed)) then it _also_
+	   assumes that they're not aligned -- so it emits crappy
+	   code on some architectures. Ideally we want an attribute
+	   which means just 'no padding', without the alignment
+	   thing. But GCC doesn't have that -- we have to just
+	   hope the structs are the right sizes, instead. */
+	BUILD_BUG_ON(sizeof(struct jffs2_unknown_node) != 12);
+	BUILD_BUG_ON(sizeof(struct jffs2_raw_dirent) != 40);
+	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+
+	pr_info("JFFS version 2.2."
+#ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+	       " (NAND)"
+#endif
+#ifdef CONFIG_JFFS2_SUMMARY
+	       " (SUMMARY) "
+#endif
+	       " © 2001-2006 Red Hat, Inc.\n");
+
+	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+					     sizeof(struct jffs2_inode_info),
+					     0, (SLAB_RECLAIM_ACCOUNT|
+						SLAB_MEM_SPREAD|SLAB_ACCOUNT),
+					     jffs2_i_init_once);
+	if (!jffs2_inode_cachep) {
+		pr_err("error: Failed to initialise inode cache\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+late_initcall(init_jffs2_fs);
diff --git a/fs/jffs2/xattr.h b/fs/jffs2/xattr.h
new file mode 100644
index 0000000000..dced873766
--- /dev/null
+++ b/fs/jffs2/xattr.h
@@ -0,0 +1,126 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2006  NEC Corporation
+ *
+ * Created by KaiGai Kohei <kaigai@ak.jp.nec.com>
+ *
+ * For licensing information, see the file 'LICENCE' in this directory.
+ *
+ */
+
+#ifndef _JFFS2_FS_XATTR_H_
+#define _JFFS2_FS_XATTR_H_
+
+#include <linux/list.h>
+
+#define JFFS2_XFLAGS_HOT	(0x01)	/* This datum is HOT */
+#define JFFS2_XFLAGS_BIND	(0x02)	/* This datum is not reclaimed */
+#define JFFS2_XFLAGS_DEAD	(0x40)	/* This datum is already dead */
+#define JFFS2_XFLAGS_INVALID	(0x80)	/* This datum contains crc error */
+
+struct jffs2_xattr_datum
+{
+	void *always_null;
+	struct jffs2_raw_node_ref *node;
+	uint8_t class;
+	uint8_t flags;
+	uint16_t xprefix;		/* see JFFS2_XATTR_PREFIX_* */
+
+	struct list_head xindex;	/* chained from c->xattrindex[n] */
+	uint32_t refcnt;		/* # of xattr_ref refers this */
+	uint32_t xid;
+	uint32_t version;
+
+	uint32_t data_crc;
+	uint32_t hashkey;
+	char *xname;		/* XATTR name without prefix */
+	uint32_t name_len;	/* length of xname */
+	char *xvalue;		/* XATTR value */
+	uint32_t value_len;	/* length of xvalue */
+};
+
+struct jffs2_inode_cache;
+struct jffs2_xattr_ref
+{
+	void *always_null;
+	struct jffs2_raw_node_ref *node;
+	uint8_t class;
+	uint8_t flags;		/* Currently unused */
+	u16 unused;
+
+	uint32_t xseqno;
+	union {
+		struct jffs2_inode_cache *ic;	/* reference to jffs2_inode_cache */
+		uint32_t ino;			/* only used in scanning/building  */
+	};
+	union {
+		struct jffs2_xattr_datum *xd;	/* reference to jffs2_xattr_datum */
+		uint32_t xid;			/* only used in sccanning/building */
+	};
+	struct jffs2_xattr_ref *next;		/* chained from ic->xref_list */
+};
+
+#define XREF_DELETE_MARKER	(0x00000001)
+static inline int is_xattr_ref_dead(struct jffs2_xattr_ref *ref)
+{
+	return ((ref->xseqno & XREF_DELETE_MARKER) != 0);
+}
+
+#ifdef CONFIG_JFFS2_FS_XATTR
+
+extern void jffs2_init_xattr_subsystem(struct jffs2_sb_info *c);
+extern void jffs2_build_xattr_subsystem(struct jffs2_sb_info *c);
+extern void jffs2_clear_xattr_subsystem(struct jffs2_sb_info *c);
+
+extern struct jffs2_xattr_datum *jffs2_setup_xattr_datum(struct jffs2_sb_info *c,
+							 uint32_t xid, uint32_t version);
+
+extern void jffs2_xattr_do_crccheck_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
+extern void jffs2_xattr_delete_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
+extern void jffs2_xattr_free_inode(struct jffs2_sb_info *c, struct jffs2_inode_cache *ic);
+
+extern int jffs2_garbage_collect_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd,
+					     struct jffs2_raw_node_ref *raw);
+extern int jffs2_garbage_collect_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref,
+					   struct jffs2_raw_node_ref *raw);
+extern int jffs2_verify_xattr(struct jffs2_sb_info *c);
+extern void jffs2_release_xattr_datum(struct jffs2_sb_info *c, struct jffs2_xattr_datum *xd);
+extern void jffs2_release_xattr_ref(struct jffs2_sb_info *c, struct jffs2_xattr_ref *ref);
+
+extern int do_jffs2_getxattr(struct inode *inode, int xprefix, const char *xname,
+			     char *buffer, size_t size);
+extern int do_jffs2_setxattr(struct inode *inode, int xprefix, const char *xname,
+			     const char *buffer, size_t size, int flags);
+
+extern const struct xattr_handler *jffs2_xattr_handlers[];
+extern const struct xattr_handler jffs2_user_xattr_handler;
+extern const struct xattr_handler jffs2_trusted_xattr_handler;
+
+extern ssize_t jffs2_listxattr(struct dentry *, char *, size_t);
+
+#else
+
+#define jffs2_init_xattr_subsystem(c)
+#define jffs2_build_xattr_subsystem(c)
+#define jffs2_clear_xattr_subsystem(c)
+
+#define jffs2_xattr_do_crccheck_inode(c, ic)
+#define jffs2_xattr_delete_inode(c, ic)
+#define jffs2_xattr_free_inode(c, ic)
+#define jffs2_verify_xattr(c)			(1)
+
+#define jffs2_xattr_handlers	NULL
+#define jffs2_listxattr		NULL
+
+#endif /* CONFIG_JFFS2_FS_XATTR */
+
+#ifdef CONFIG_JFFS2_FS_SECURITY
+extern int jffs2_init_security(struct inode *inode, struct inode *dir,
+			       const struct qstr *qstr);
+extern const struct xattr_handler jffs2_security_xattr_handler;
+#else
+#define jffs2_init_security(inode,dir,qstr)	(0)
+#endif /* CONFIG_JFFS2_FS_SECURITY */
+
+#endif /* _JFFS2_FS_XATTR_H_ */
diff --git a/images/Makefile b/images/Makefile
index 34b7a56101..650baf170f 100644
--- a/images/Makefile
+++ b/images/Makefile
@@ -54,7 +54,7 @@ $(pbl-lds): $(obj)/../arch/$(ARCH)/lib/pbl.lds.S FORCE
 	$(call if_changed_dep,cpp_lds_S)
 
 quiet_cmd_elf__ ?= LD      $@
-      cmd_elf__ ?= $(LD) $(LDFLAGS_barebox) --gc-sections		\
+      cmd_elf__ ?= $(LD) $(LDFLAGS_pbl) --gc-sections		\
 		-e $(2) -Map $@.map $(LDFLAGS_$(@F)) -o $@		\
 		-T $(pbl-lds)						\
 		--start-group $(barebox-pbl-common) $(obj)/piggy.o	\
diff --git a/images/Makefile.at91 b/images/Makefile.at91
index f321bdec36..448d71fb98 100644
--- a/images/Makefile.at91
+++ b/images/Makefile.at91
@@ -17,3 +17,7 @@ image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb.img
 pblb-$(CONFIG_MACH_SAMA5D27_SOM1) += start_sama5d27_som1_ek
 FILE_barebox-sama5d27-som1-ek.img = start_sama5d27_som1_ek.pblb
 image-$(CONFIG_MACH_SAMA5D27_SOM1) += barebox-sama5d27-som1-ek.img
+
+pblb-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += start_sama5d27_giantboard
+FILE_barebox-groboards-sama5d27-giantboard.img = start_sama5d27_giantboard.pblb
+image-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += barebox-groboards-sama5d27-giantboard.img
diff --git a/include/abort.h b/include/abort.h
index 89ee549e34..039500b04d 100644
--- a/include/abort.h
+++ b/include/abort.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __ABORT_H
 #define __ABORT_H
 
diff --git a/include/aimage.h b/include/aimage.h
index 9702b7d35c..4f34c24771 100644
--- a/include/aimage.h
+++ b/include/aimage.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * (C) Copyright 2011 Jean-Christhophe PLAGNIOL-VILLARD <plagniol@jcrosoft.com>
  *
  * Android boot image
- *
- * Under GPLv2 only
  */
 
 #ifndef __AIMAGE_H__
diff --git a/include/aiodev.h b/include/aiodev.h
index 5e38b4fab5..ff877c0d78 100644
--- a/include/aiodev.h
+++ b/include/aiodev.h
@@ -6,15 +6,6 @@
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __AIODEVICE_H
diff --git a/include/asm-generic/memory_layout.h b/include/asm-generic/memory_layout.h
index 3f69664aa0..0d7ce3fe02 100644
--- a/include/asm-generic/memory_layout.h
+++ b/include/asm-generic/memory_layout.h
@@ -11,8 +11,8 @@
 #define MALLOC_BASE CONFIG_MALLOC_BASE
 #endif
 
-#ifdef CONFIG_BOOTM_OPTEE_SIZE
-#define OPTEE_SIZE CONFIG_BOOTM_OPTEE_SIZE
+#ifdef CONFIG_OPTEE_SIZE
+#define OPTEE_SIZE CONFIG_OPTEE_SIZE
 #else
 #define OPTEE_SIZE 0
 #endif
diff --git a/include/ata_drive.h b/include/ata_drive.h
index d61c6f11d4..d98e410b30 100644
--- a/include/ata_drive.h
+++ b/include/ata_drive.h
@@ -1,16 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef ATA_DISK_H
diff --git a/include/bbu.h b/include/bbu.h
index 9da6785d2e..3b9d2f4bf1 100644
--- a/include/bbu.h
+++ b/include/bbu.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __INCLUDE_BBU_H
 #define __INCLUDE_BBU_H
 
diff --git a/include/binfmt.h b/include/binfmt.h
index 46b627e36d..7eb46e5225 100644
--- a/include/binfmt.h
+++ b/include/binfmt.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * GPL v2
  */
 
 #ifndef __BFMT_H__
diff --git a/include/block.h b/include/block.h
index d35c4ecdf4..a1de266194 100644
--- a/include/block.h
+++ b/include/block.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __BLOCK_H
 #define __BLOCK_H
 
diff --git a/include/blspec.h b/include/blspec.h
index 7d911f030b..37076cd47c 100644
--- a/include/blspec.h
+++ b/include/blspec.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __LOADER_H__
 #define __LOADER_H__
 
diff --git a/include/boot.h b/include/boot.h
index 4f7612ab80..4054c27d93 100644
--- a/include/boot.h
+++ b/include/boot.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __BOOT_H
 #define __BOOT_H
 
diff --git a/include/bootchooser.h b/include/bootchooser.h
index 7822c01459..2cfd5b126a 100644
--- a/include/bootchooser.h
+++ b/include/bootchooser.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __BOOTCHOOSER_H
 #define __BOOTCHOOSER_H
 
diff --git a/include/bootm.h b/include/bootm.h
index a041aa35b9..7782de7a47 100644
--- a/include/bootm.h
+++ b/include/bootm.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __BOOTM_H
 #define __BOOTM_H
 
diff --git a/include/bootsource.h b/include/bootsource.h
index 92f7f27cd4..32295ddd96 100644
--- a/include/bootsource.h
+++ b/include/bootsource.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __BOOTSOURCE_H__
 #define __BOOTSOURCE_H__
 
diff --git a/include/bootstrap.h b/include/bootstrap.h
index d3ee6be47c..05734a920c 100644
--- a/include/bootstrap.h
+++ b/include/bootstrap.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
- *
- * Under GPLv2
  */
 
 #ifndef __BOOSTRAP_H__
diff --git a/include/bpkfs.h b/include/bpkfs.h
index ccb56c1419..c80dc211c6 100644
--- a/include/bpkfs.h
+++ b/include/bpkfs.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * under GPLv2 only
  */
 
 #ifndef __BPKFS_H__
diff --git a/include/bunzip2.h b/include/bunzip2.h
index 115272137a..55404ff846 100644
--- a/include/bunzip2.h
+++ b/include/bunzip2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef DECOMPRESS_BUNZIP2_H
 #define DECOMPRESS_BUNZIP2_H
 
diff --git a/include/byteorder.h b/include/byteorder.h
index 4b255a5fab..c3cac85013 100644
--- a/include/byteorder.h
+++ b/include/byteorder.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __BYTEORDER_H__
 #define __BYTEORDER_H__
 
diff --git a/include/cache.h b/include/cache.h
index 23841dcd06..37e008794b 100644
--- a/include/cache.h
+++ b/include/cache.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __CACHE_H
 #define __CACHE_H
 
diff --git a/include/clock.h b/include/clock.h
index 211748f3a0..d681bf630e 100644
--- a/include/clock.h
+++ b/include/clock.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef CLOCK_H
 #define CLOCK_H
 
diff --git a/include/cmdlinepart.h b/include/cmdlinepart.h
index bf8cdfa62a..9f5bdf610a 100644
--- a/include/cmdlinepart.h
+++ b/include/cmdlinepart.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __CMD_LINE_PART_H
 #define __CMD_LINE_PART_H
 
diff --git a/include/command.h b/include/command.h
index 7555d0053c..f016e35b2d 100644
--- a/include/command.h
+++ b/include/command.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 /*
diff --git a/include/common.h b/include/common.h
index c6eb50420f..ef2e4e5c31 100644
--- a/include/common.h
+++ b/include/common.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __COMMON_H_
diff --git a/include/complete.h b/include/complete.h
index 491ba66cb4..763d256bf4 100644
--- a/include/complete.h
+++ b/include/complete.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __COMPLETE_
 #define __COMPLETE_
 
diff --git a/include/console.h b/include/console.h
index 537ac97ab3..634b95ca4e 100644
--- a/include/console.h
+++ b/include/console.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2000
  * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef _CONSOLE_H_
diff --git a/include/console_countdown.h b/include/console_countdown.h
index 88cadf11ec..df8da71e8b 100644
--- a/include/console_countdown.h
+++ b/include/console_countdown.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __CONSOLE_COUNTDOWN_H
 #define __CONSOLE_COUNTDOWN_H
 
diff --git a/include/crc.h b/include/crc.h
index a67388f732..eb972705c2 100644
--- a/include/crc.h
+++ b/include/crc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __INCLUDE_CRC_H
 #define __INCLUDE_CRC_H
 
diff --git a/include/crc7.h b/include/crc7.h
index 0c41cc341f..27d2dae422 100644
--- a/include/crc7.h
+++ b/include/crc7.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _LINUX_CRC7_H
 #define _LINUX_CRC7_H
 #include <common.h>
diff --git a/include/debug_ll.h b/include/debug_ll.h
index 5047516399..5bd1afe6ac 100644
--- a/include/debug_ll.h
+++ b/include/debug_ll.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * debug_ll.h
  *
@@ -5,16 +6,6 @@
  *  12 Feb 2005
  *
  *  Copyright (C) 2005 Marc Singer
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
  */
 
 #ifndef __INCLUDE_DEBUG_LL_H__
diff --git a/include/dhcp.h b/include/dhcp.h
index 0dced8e9fa..e19dac0d66 100644
--- a/include/dhcp.h
+++ b/include/dhcp.h
@@ -1,10 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2015 PHYTEC Messtechnik GmbH,
  * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __DHCP_H__
diff --git a/include/digest.h b/include/digest.h
index 176084146b..6148c03da4 100644
--- a/include/digest.h
+++ b/include/digest.h
@@ -1,19 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * (C) Copyright 2008-2010 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __DIGEST_H__
diff --git a/include/dirent.h b/include/dirent.h
index 1df5d90452..d7b5e78b27 100644
--- a/include/dirent.h
+++ b/include/dirent.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __DIRENT_H
 #define __DIRENT_H
 
diff --git a/include/disks.h b/include/disks.h
index 9932750a24..e9b72c2507 100644
--- a/include/disks.h
+++ b/include/disks.h
@@ -1,16 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef DISKS_H
diff --git a/include/dma-dir.h b/include/dma-dir.h
index 970764c5b3..d3b1a27b4f 100644
--- a/include/dma-dir.h
+++ b/include/dma-dir.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __DMA_DIR_H
 #define __DMA_DIR_H
 
diff --git a/include/dma.h b/include/dma.h
index 7f95782635..07b79cd918 100644
--- a/include/dma.h
+++ b/include/dma.h
@@ -1,8 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2012 by Marc Kleine-Budde <mkl@pengutronix.de>
- *
- * This file is released under the GPLv2
- *
  */
 
 #ifndef __DMA_H
diff --git a/include/driver.h b/include/driver.h
index c9ad95fd40..fac3953ef4 100644
--- a/include/driver.h
+++ b/include/driver.h
@@ -1,19 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef DRIVER_H
diff --git a/include/efi.h b/include/efi.h
index 43c0593951..5698a84145 100644
--- a/include/efi.h
+++ b/include/efi.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _LINUX_EFI_H
 #define _LINUX_EFI_H
 
diff --git a/include/elf.h b/include/elf.h
index 44be07f73a..113728f08a 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _LINUX_ELF_H
 #define _LINUX_ELF_H
 
diff --git a/include/envfs.h b/include/envfs.h
index c8fc3759c6..d4e2c6110e 100644
--- a/include/envfs.h
+++ b/include/envfs.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _ENVFS_H
 #define _ENVFS_H
 
diff --git a/include/environment.h b/include/environment.h
index 52eafe9882..39606b8ad9 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef _ENVIRONMENT_H_
diff --git a/include/errno.h b/include/errno.h
index 496ccab0ee..50f00de5d6 100644
--- a/include/errno.h
+++ b/include/errno.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __ERRNO_H
 #define __ERRNO_H
 
diff --git a/include/fb.h b/include/fb.h
index 271b939968..e17d07ae0c 100644
--- a/include/fb.h
+++ b/include/fb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __FB_H
 #define __FB_H
 
diff --git a/include/fcntl.h b/include/fcntl.h
index 98020bdfb1..2e7c0eed34 100644
--- a/include/fcntl.h
+++ b/include/fcntl.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __FCNTL_H
 #define __FCNTL_H
 
diff --git a/include/fdt.h b/include/fdt.h
index 38a2d27b02..232514c894 100644
--- a/include/fdt.h
+++ b/include/fdt.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _FDT_H
 #define _FDT_H
 
diff --git a/include/file-list.h b/include/file-list.h
index 404d8d64bb..9a9edfa378 100644
--- a/include/file-list.h
+++ b/include/file-list.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __FILE_LIST
 #define __FILE_LIST
 
diff --git a/include/filetype.h b/include/filetype.h
index db95fdaa0a..c3a5bdfbbe 100644
--- a/include/filetype.h
+++ b/include/filetype.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __FILE_TYPE_H
 #define __FILE_TYPE_H
 
diff --git a/include/firmware.h b/include/firmware.h
index 7c01a77118..19777d9bf7 100644
--- a/include/firmware.h
+++ b/include/firmware.h
@@ -1,14 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2013 Juergen Beisert <kernel@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef FIRMWARE_H
diff --git a/include/fnmatch.h b/include/fnmatch.h
index c0fd6a9207..c13beb9011 100644
--- a/include/fnmatch.h
+++ b/include/fnmatch.h
@@ -1,20 +1,7 @@
+/* SPDX-License-Identifier: LGPL-2.1-or-later */
 /* Copyright (C) 1991,92,93,96,97,98,99,2001 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
+*/
 
 #ifndef	_FNMATCH_H
 #define	_FNMATCH_H	1
diff --git a/include/fs.h b/include/fs.h
index d9684c82b1..5811199c01 100644
--- a/include/fs.h
+++ b/include/fs.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __FS_H
 #define __FS_H
 
diff --git a/include/getopt.h b/include/getopt.h
index 4f48ba8fd9..d4c01e793a 100644
--- a/include/getopt.h
+++ b/include/getopt.h
@@ -1,17 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * getopt.h - a simple getopt(3) implementation.
  *
  * Copyright (c) 2007 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __GETOPT_H
diff --git a/include/glob.h b/include/glob.h
index 7778152513..5f532e6652 100644
--- a/include/glob.h
+++ b/include/glob.h
@@ -1,20 +1,7 @@
+/* SPDX-License-Identifier: LGPL-2.1-or-later */
 /* Copyright (C) 1991,92,95,96,97,98,2000,2001 Free Software Foundation, Inc.
    This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
+*/
 
 #ifndef	_GLOB_H
 #define	_GLOB_H	1
diff --git a/include/globalvar.h b/include/globalvar.h
index 67391e2042..fc85e93e14 100644
--- a/include/globalvar.h
+++ b/include/globalvar.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __GLOBALVAR_H
 #define __GLOBALVAR_H
 
diff --git a/include/gpio.h b/include/gpio.h
index 0c0c0337e0..98c5b93ba2 100644
--- a/include/gpio.h
+++ b/include/gpio.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __GPIO_H
 #define __GPIO_H
 
diff --git a/include/gpio_keys.h b/include/gpio_keys.h
index f4a22e16db..f12bed2a0b 100644
--- a/include/gpio_keys.h
+++ b/include/gpio_keys.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _GPIO_KEYS_H
 #define _GPIO_KEYS_H
 
diff --git a/include/gunzip.h b/include/gunzip.h
index b9018941d1..0a959d5eb7 100644
--- a/include/gunzip.h
+++ b/include/gunzip.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef GUNZIP_H
 #define GUNZIP_H
 
diff --git a/include/hab.h b/include/hab.h
index 78c2b865ba..1aa5384053 100644
--- a/include/hab.h
+++ b/include/hab.h
@@ -1,18 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __HABV4_H
diff --git a/include/image-fit.h b/include/image-fit.h
index fc0883b5dc..27c9e83519 100644
--- a/include/image-fit.h
+++ b/include/image-fit.h
@@ -1,17 +1,5 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- *
  * Copyright (C) Jan Lübbe, 2014
  */
 
diff --git a/include/image-metadata.h b/include/image-metadata.h
index 5904d95acd..42ddf2fab0 100644
--- a/include/image-metadata.h
+++ b/include/image-metadata.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __INCLUDE_IMAGE_METADTA_H
 #define __INCLUDE_IMAGE_METADTA_H
 
@@ -25,9 +26,12 @@
 #define IMD_TYPE_MODEL		0x640c8004 /* The board name this image is for */
 #define IMD_TYPE_OF_COMPATIBLE	0x640c8005 /* the device tree compatible string */
 #define IMD_TYPE_PARAMETER	0x640c8006 /* A generic parameter. Use key=value as data */
+#define IMD_TYPE_CRC32		0x640c1007 /* the checksum of the barebox images */
 #define IMD_TYPE_END		0x640c7fff
 #define IMD_TYPE_INVALID	0xffffffff
 
+#define IMD_CRC32_FLAG_TAG_VALID	(1 << 0)
+
 /*
  * The IMD header. All data is stored in little endian format in the image.
  * The next header starts at the next 4 byte boundary after the data.
@@ -51,8 +55,26 @@ static inline int imd_is_string(uint32_t type)
 	return (type & 0x8000) ? 1 : 0;
 }
 
-static inline int imd_type_valid(uint32_t type)
+/*
+ * A IMD int.
+ */
+struct imd_entry_crc32 {
+	struct imd_header header;
+	uint32_t data;
+	uint32_t flags;
+};
+
+static inline int imd_is_crc32(uint32_t type)
+{
+	return (type & IMD_TYPE_CRC32) ? 1 : 0;
+}
+
+static inline int imd_crc32_is_valid(uint32_t flags)
 {
+	return (flags & IMD_CRC32_FLAG_TAG_VALID) ? 1 : 0;
+}
+
+static inline int imd_type_valid(uint32_t type) {
 	return (type & 0xffff0000) == 0x640c0000;
 }
 
@@ -78,11 +100,18 @@ static inline uint32_t imd_read_length(const struct imd_header *imd)
 	return imd_read_le32(&imd->datalength);
 }
 
+static inline uint32_t imd_read_flags(const struct imd_entry_crc32 *imd)
+{
+	return imd_read_le32(&imd->flags);
+}
+
 const struct imd_header *imd_find_type(const struct imd_header *imd,
 				       uint32_t type);
 
 const struct imd_header *imd_get(const void *buf, int size);
 const char *imd_string_data(const struct imd_header *imd, int index);
+const uint32_t *imd_uint32_data(const struct imd_header *imd);
+uint32_t *imd_uint32_flags(const struct imd_header *imd);
 const char *imd_type_to_name(uint32_t type);
 char *imd_concat_strings(const struct imd_header *imd);
 const char *imd_get_param(const struct imd_header *imd, const char *name);
@@ -90,6 +119,7 @@ const char *imd_get_param(const struct imd_header *imd, const char *name);
 extern int imd_command_verbose;
 int imd_command_setenv(const char *variable_name, const char *value);
 int imd_command(int argc, char *argv[]);
+int imd_verify_crc32(void *buf, size_t size);
 
 #ifdef __BAREBOX__
 
@@ -107,6 +137,13 @@ int imd_command(int argc, char *argv[]);
 		.data = _string,							\
 	}
 
+#define BAREBOX_IMD_CRC(_name, _crc, _keep_if_unused)					\
+	const struct imd_entry_crc32 __barebox_imd_##__name 				\
+  	__BAREBOX_IMD_SECTION(.barebox_imd_ ## _keep_if_unused ## _ ## _name) = {	\
+		.header.type = cpu_to_le32(IMD_TYPE_CRC32),				\
+		.header.datalength = cpu_to_le32(sizeof(uint32_t) * 2),			\
+		.data = _crc,								\
+  }
 
 #ifdef CONFIG_IMD
 void imd_used(const void *);
diff --git a/include/image.h b/include/image.h
index add9c85874..18344dfef9 100644
--- a/include/image.h
+++ b/include/image.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2000-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -5,17 +6,6 @@
  * See file CREDITS for list of people who contributed to this
  * project.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- *
  ********************************************************************
  * NOTE: This header file defines an interface to barebox. Including
  * this (unmodified) header file in another file is considered normal
diff --git a/include/init.h b/include/init.h
index 527d49afec..d1cef14b07 100644
--- a/include/init.h
+++ b/include/init.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _INIT_H
 #define _INIT_H
 
diff --git a/include/int_sqrt.h b/include/int_sqrt.h
index 55fb4fbe66..b06e6a8ab1 100644
--- a/include/int_sqrt.h
+++ b/include/int_sqrt.h
@@ -1,17 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __INT_SQRT__
diff --git a/include/io.h b/include/io.h
index 8eb56b061f..9130020722 100644
--- a/include/io.h
+++ b/include/io.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __IO_H
 #define __IO_H
 
diff --git a/include/ioctl.h b/include/ioctl.h
index 1ade20f905..3290a52519 100644
--- a/include/ioctl.h
+++ b/include/ioctl.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __IOCTL_H
 #define __IOCTL_H
 
diff --git a/include/jtag.h b/include/jtag.h
index 4cc4eaca91..b2a533fcb8 100644
--- a/include/jtag.h
+++ b/include/jtag.h
@@ -1,21 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * include/linux/jtag.h
  *
  * Written Aug 2009 by Davide Rizzo <elpa.rizzo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /*
diff --git a/include/kallsyms.h b/include/kallsyms.h
index 69b84d2c6c..e0b3ff7cd5 100644
--- a/include/kallsyms.h
+++ b/include/kallsyms.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __KALLSYMS_H
 #define __KALLSYMS_H
 
diff --git a/include/kfifo.h b/include/kfifo.h
index 25880f4626..9c19d08b69 100644
--- a/include/kfifo.h
+++ b/include/kfifo.h
@@ -1,17 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * A simple kernel FIFO implementation.
  *
  * Copyright (C) 2004 Stelian Pop <stelian@popies.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef _LINUX_KFIFO_H
 #define _LINUX_KFIFO_H
diff --git a/include/kgdb.h b/include/kgdb.h
index f543cd6e18..1f23833f92 100644
--- a/include/kgdb.h
+++ b/include/kgdb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __KGDB_H__
 #define __KGDB_H__
 
diff --git a/include/led.h b/include/led.h
index 0ce857129d..6b6aff922a 100644
--- a/include/led.h
+++ b/include/led.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __LED_H
 #define __LED_H
 
diff --git a/include/libbb.h b/include/libbb.h
index d05c190637..a3a13b41ce 100644
--- a/include/libbb.h
+++ b/include/libbb.h
@@ -1,4 +1,4 @@
-
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __LIBBB_H
 #define __LIBBB_H
 
diff --git a/include/libfile.h b/include/libfile.h
index f1d6951877..350ddddf70 100644
--- a/include/libfile.h
+++ b/include/libfile.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __LIBFILE_H
 #define __LIBFILE_H
 
diff --git a/include/libgen.h b/include/libgen.h
index 71f06eb6f6..6c0f039efa 100644
--- a/include/libgen.h
+++ b/include/libgen.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __LIBGEN_H
 #define __LIBGEN_H
 
diff --git a/include/linux/clk/clk-conf.h b/include/linux/clk/clk-conf.h
index 8f4382e6c6..8da0f99d66 100644
--- a/include/linux/clk/clk-conf.h
+++ b/include/linux/clk/clk-conf.h
@@ -6,12 +6,23 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#if defined(CONFIG_OFTREE) && defined(CONFIG_COMMON_CLK_OF_PROVIDER)
+#ifndef __CLK_CONF_H
+#define __CLK_CONF_H
 
 #include <linux/types.h>
 
+#if defined(CONFIG_OFTREE) && defined(CONFIG_COMMON_CLK_OF_PROVIDER)
+
 struct device_node;
 int of_clk_set_defaults(struct device_node *node, bool clk_supplier);
 
+#else
+
+static inline int of_clk_set_defaults(struct device_node *node,
+				      bool clk_supplier)
+{
+	return 0;
+}
+
 #endif
+#endif /* __CLK_CONF_H */
diff --git a/include/linux/hash.h b/include/linux/hash.h
new file mode 100644
index 0000000000..ad6fa21d97
--- /dev/null
+++ b/include/linux/hash.h
@@ -0,0 +1,104 @@
+#ifndef _LINUX_HASH_H
+#define _LINUX_HASH_H
+/* Fast hashing routine for ints,  longs and pointers.
+   (C) 2002 Nadia Yvette Chambers, IBM */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+/*
+ * The "GOLDEN_RATIO_PRIME" is used in ifs/btrfs/brtfs_inode.h and
+ * fs/inode.c.  It's not actually prime any more (the previous primes
+ * were actively bad for hashing), but the name remains.
+ */
+#if BITS_PER_LONG == 32
+#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_32
+#define hash_long(val, bits) hash_32(val, bits)
+#elif BITS_PER_LONG == 64
+#define hash_long(val, bits) hash_64(val, bits)
+#define GOLDEN_RATIO_PRIME GOLDEN_RATIO_64
+#else
+#error Wordsize not 32 or 64
+#endif
+
+/*
+ * This hash multiplies the input by a large odd number and takes the
+ * high bits.  Since multiplication propagates changes to the most
+ * significant end only, it is essential that the high bits of the
+ * product be used for the hash value.
+ *
+ * Chuck Lever verified the effectiveness of this technique:
+ * http://www.citi.umich.edu/techreports/reports/citi-tr-00-1.pdf
+ *
+ * Although a random odd number will do, it turns out that the golden
+ * ratio phi = (sqrt(5)-1)/2, or its negative, has particularly nice
+ * properties.  (See Knuth vol 3, section 6.4, exercise 9.)
+ *
+ * These are the negative, (1 - phi) = phi**2 = (3 - sqrt(5))/2,
+ * which is very slightly easier to multiply by and makes no
+ * difference to the hash distribution.
+ */
+#define GOLDEN_RATIO_32 0x61C88647
+#define GOLDEN_RATIO_64 0x61C8864680B583EBull
+
+#ifdef CONFIG_HAVE_ARCH_HASH
+/* This header may use the GOLDEN_RATIO_xx constants */
+#include <asm/hash.h>
+#endif
+
+/*
+ * The _generic versions exist only so lib/test_hash.c can compare
+ * the arch-optimized versions with the generic.
+ *
+ * Note that if you change these, any <asm/hash.h> that aren't updated
+ * to match need to have their HAVE_ARCH_* define values updated so the
+ * self-test will not false-positive.
+ */
+#ifndef HAVE_ARCH__HASH_32
+#define __hash_32 __hash_32_generic
+#endif
+static inline u32 __hash_32_generic(u32 val)
+{
+	return val * GOLDEN_RATIO_32;
+}
+
+#ifndef HAVE_ARCH_HASH_32
+#define hash_32 hash_32_generic
+#endif
+static inline u32 hash_32_generic(u32 val, unsigned int bits)
+{
+	/* High bits are more random, so use them. */
+	return __hash_32(val) >> (32 - bits);
+}
+
+#ifndef HAVE_ARCH_HASH_64
+#define hash_64 hash_64_generic
+#endif
+static __always_inline u32 hash_64_generic(u64 val, unsigned int bits)
+{
+#if BITS_PER_LONG == 64
+	/* 64x64-bit multiply is efficient on all 64-bit processors */
+	return val * GOLDEN_RATIO_64 >> (64 - bits);
+#else
+	/* Hash 64 bits using only 32x32-bit multiply. */
+	return hash_32((u32)val ^ __hash_32(val >> 32), bits);
+#endif
+}
+
+static inline u32 hash_ptr(const void *ptr, unsigned int bits)
+{
+	return hash_long((unsigned long)ptr, bits);
+}
+
+/* This really should be called fold32_ptr; it does no hashing to speak of. */
+static inline u32 hash32_ptr(const void *ptr)
+{
+	unsigned long val = (unsigned long)ptr;
+
+#if BITS_PER_LONG == 64
+	val ^= (val >> 32);
+#endif
+	return (u32)val;
+}
+
+#endif /* _LINUX_HASH_H */
diff --git a/include/linux/jffs2.h b/include/linux/jffs2.h
new file mode 100644
index 0000000000..ed2ebcfc42
--- /dev/null
+++ b/include/linux/jffs2.h
@@ -0,0 +1,218 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright © 2001-2007 Red Hat, Inc.
+ * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Created by David Woodhouse <dwmw2@infradead.org>
+ *
+ * For licensing information, see the file 'LICENCE' in the
+ * jffs2 directory.
+ */
+
+#ifndef __LINUX_JFFS2_H__
+#define __LINUX_JFFS2_H__
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* You must include something which defines the C99 uintXX_t types.
+   We don't do it from here because this file is used in too many
+   different environments. */
+
+/* Values we may expect to find in the 'magic' field */
+#define JFFS2_OLD_MAGIC_BITMASK 0x1984
+#define JFFS2_MAGIC_BITMASK 0x1985
+#define KSAMTIB_CIGAM_2SFFJ 0x8519 /* For detecting wrong-endian fs */
+#define JFFS2_EMPTY_BITMASK 0xffff
+#define JFFS2_DIRTY_BITMASK 0x0000
+
+/* Summary node MAGIC marker */
+#define JFFS2_SUM_MAGIC	0x02851885
+
+/* We only allow a single char for length, and 0xFF is empty flash so
+   we don't want it confused with a real length. Hence max 254.
+*/
+#define JFFS2_MAX_NAME_LEN 254
+
+/* How small can we sensibly write nodes? */
+#define JFFS2_MIN_DATA_LEN 128
+
+#define JFFS2_COMPR_NONE	0x00
+#define JFFS2_COMPR_ZERO	0x01
+#define JFFS2_COMPR_RTIME	0x02
+#define JFFS2_COMPR_RUBINMIPS	0x03
+#define JFFS2_COMPR_COPY	0x04
+#define JFFS2_COMPR_DYNRUBIN	0x05
+#define JFFS2_COMPR_ZLIB	0x06
+#define JFFS2_COMPR_LZO		0x07
+/* Compatibility flags. */
+#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+#define JFFS2_NODE_ACCURATE 0x2000
+/* INCOMPAT: Fail to mount the filesystem */
+#define JFFS2_FEATURE_INCOMPAT 0xc000
+/* ROCOMPAT: Mount read-only */
+#define JFFS2_FEATURE_ROCOMPAT 0x8000
+/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
+/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
+
+#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
+#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
+#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+#define JFFS2_NODETYPE_PADDING (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 4)
+
+#define JFFS2_NODETYPE_SUMMARY (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 6)
+
+#define JFFS2_NODETYPE_XATTR (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 8)
+#define JFFS2_NODETYPE_XREF (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 9)
+
+/* XATTR Related */
+#define JFFS2_XPREFIX_USER		1	/* for "user." */
+#define JFFS2_XPREFIX_SECURITY		2	/* for "security." */
+#define JFFS2_XPREFIX_ACL_ACCESS	3	/* for "system.posix_acl_access" */
+#define JFFS2_XPREFIX_ACL_DEFAULT	4	/* for "system.posix_acl_default" */
+#define JFFS2_XPREFIX_TRUSTED		5	/* for "trusted.*" */
+
+#define JFFS2_ACL_VERSION		0x0001
+
+#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at
+					   mount time, don't wait for it to
+					   happen later */
+#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific
+					   compression type */
+
+
+/* These can go once we've made sure we've caught all uses without
+   byteswapping */
+
+typedef struct {
+	__u32 v32;
+} __attribute__((packed)) jint32_t;
+
+typedef struct {
+	__u32 m;
+} __attribute__((packed)) jmode_t;
+
+typedef struct {
+	__u16 v16;
+} __attribute__((packed)) jint16_t;
+
+struct jffs2_unknown_node
+{
+	/* All start like this */
+	jint16_t magic;
+	jint16_t nodetype;
+	jint32_t totlen; /* So we can skip over nodes we don't grok */
+	jint32_t hdr_crc;
+};
+
+struct jffs2_raw_dirent
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* == JFFS2_NODETYPE_DIRENT */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t pino;
+	jint32_t version;
+	jint32_t ino; /* == zero for unlink */
+	jint32_t mctime;
+	__u8 nsize;
+	__u8 type;
+	__u8 unused[2];
+	jint32_t node_crc;
+	jint32_t name_crc;
+	__u8 name[0];
+};
+
+/* The JFFS2 raw inode structure: Used for storage on physical media.  */
+/* The uid, gid, atime, mtime and ctime members could be longer, but
+   are left like this for space efficiency. If and when people decide
+   they really need them extended, it's simple enough to add support for
+   a new type of raw node.
+*/
+struct jffs2_raw_inode
+{
+	jint16_t magic;      /* A constant magic number.  */
+	jint16_t nodetype;   /* == JFFS2_NODETYPE_INODE */
+	jint32_t totlen;     /* Total length of this node (inc data, etc.) */
+	jint32_t hdr_crc;
+	jint32_t ino;        /* Inode number.  */
+	jint32_t version;    /* Version number.  */
+	jmode_t mode;       /* The file's type or mode.  */
+	jint16_t uid;        /* The file's owner.  */
+	jint16_t gid;        /* The file's group.  */
+	jint32_t isize;      /* Total resultant size of this inode (used for truncations)  */
+	jint32_t atime;      /* Last access time.  */
+	jint32_t mtime;      /* Last modification time.  */
+	jint32_t ctime;      /* Change time.  */
+	jint32_t offset;     /* Where to begin to write.  */
+	jint32_t csize;      /* (Compressed) data size */
+	jint32_t dsize;	     /* Size of the node's data. (after decompression) */
+	__u8 compr;       /* Compression algorithm used */
+	__u8 usercompr;   /* Compression algorithm requested by the user */
+	jint16_t flags;	     /* See JFFS2_INO_FLAG_* */
+	jint32_t data_crc;   /* CRC for the (compressed) data.  */
+	jint32_t node_crc;   /* CRC for the raw inode (excluding data)  */
+	__u8 data[0];
+};
+
+struct jffs2_raw_xattr {
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XATTR */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t version;
+	__u8 xprefix;
+	__u8 name_len;
+	jint16_t value_len;
+	jint32_t data_crc;
+	jint32_t node_crc;
+	__u8 data[0];
+} __attribute__((packed));
+
+struct jffs2_raw_xref
+{
+	jint16_t magic;
+	jint16_t nodetype;	/* = JFFS2_NODETYPE_XREF */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t ino;		/* inode number */
+	jint32_t xid;		/* XATTR identifier number */
+	jint32_t xseqno;	/* xref sequential number */
+	jint32_t node_crc;
+} __attribute__((packed));
+
+struct jffs2_raw_summary
+{
+	jint16_t magic;
+	jint16_t nodetype; 	/* = JFFS2_NODETYPE_SUMMARY */
+	jint32_t totlen;
+	jint32_t hdr_crc;
+	jint32_t sum_num;	/* number of sum entries*/
+	jint32_t cln_mkr;	/* clean marker size, 0 = no cleanmarker */
+	jint32_t padded;	/* sum of the size of padding nodes */
+	jint32_t sum_crc;	/* summary information crc */
+	jint32_t node_crc; 	/* node crc */
+	jint32_t sum[0]; 	/* inode summary info */
+};
+
+union jffs2_node_union
+{
+	struct jffs2_raw_inode i;
+	struct jffs2_raw_dirent d;
+	struct jffs2_raw_xattr x;
+	struct jffs2_raw_xref r;
+	struct jffs2_raw_summary s;
+	struct jffs2_unknown_node u;
+};
+
+/* Data payload for device nodes. */
+union jffs2_device_node {
+	jint16_t old_id;
+	jint32_t new_id;
+};
+
+#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/local_mac_address.h b/include/local_mac_address.h
index 3d1ec66b1f..5d2fb9d4c2 100644
--- a/include/local_mac_address.h
+++ b/include/local_mac_address.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
- *
- * Under GPLv2 only
  */
 
 #ifndef __LOCAL_MAC_ADDRESS_H__
diff --git a/include/lzo.h b/include/lzo.h
index 6c34be13ef..f46f38b0ed 100644
--- a/include/lzo.h
+++ b/include/lzo.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __LZO_H__
 #define __LZO_H__
 /*
diff --git a/include/magicvar.h b/include/magicvar.h
index bb5bd2591f..9fb89a84cc 100644
--- a/include/magicvar.h
+++ b/include/magicvar.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __MAGIC_VARS_H
 #define __MAGIC_VARS_H
 
diff --git a/include/malloc.h b/include/malloc.h
index 0d3c9e97a0..971fc4058b 100644
--- a/include/malloc.h
+++ b/include/malloc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __MALLOC_H
 #define __MALLOC_H
 
diff --git a/include/math.h b/include/math.h
index 5648e3f9c1..1e59a8479e 100644
--- a/include/math.h
+++ b/include/math.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /* math.h - interface to shell math "library" -- this allows shells to share
  *          the implementation of arithmetic $((...)) expansions.
  *
diff --git a/include/mci.h b/include/mci.h
index a45d744761..cf9d188c5c 100644
--- a/include/mci.h
+++ b/include/mci.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2010 Juergen Beisert, Pengutronix
  *
@@ -10,17 +11,6 @@
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef _MCI_H_
@@ -367,6 +357,18 @@ struct mci_data {
 	unsigned blocksize;	/**< block size in bytes (mostly 512) */
 };
 
+enum mci_timing {
+	MMC_TIMING_LEGACY	= 0,
+	MMC_TIMING_MMC_HS	= 1,
+	MMC_TIMING_SD_HS	= 2,
+	MMC_TIMING_UHS_SDR12	= MMC_TIMING_LEGACY,
+	MMC_TIMING_UHS_SDR25	= MMC_TIMING_SD_HS,
+	MMC_TIMING_UHS_SDR50	= 3,
+	MMC_TIMING_UHS_SDR104	= 4,
+	MMC_TIMING_UHS_DDR50	= 5,
+	MMC_TIMING_MMC_HS200	= 6,
+};
+
 struct mci_ios {
 	unsigned int	clock;			/* clock rate */
 
@@ -376,17 +378,7 @@ struct mci_ios {
 #define MMC_BUS_WIDTH_4		2
 #define MMC_BUS_WIDTH_8		3
 
-	unsigned char	timing;			/* timing specification used */
-
-#define MMC_TIMING_LEGACY	0
-#define MMC_TIMING_MMC_HS	1
-#define MMC_TIMING_SD_HS	2
-#define MMC_TIMING_UHS_SDR12	MMC_TIMING_LEGACY
-#define MMC_TIMING_UHS_SDR25	MMC_TIMING_SD_HS
-#define MMC_TIMING_UHS_SDR50	3
-#define MMC_TIMING_UHS_SDR104	4
-#define MMC_TIMING_UHS_DDR50	5
-#define MMC_TIMING_MMC_HS200	6
+	enum mci_timing	timing;			/* timing specification used */
 
 #define MMC_SDR_MODE		0
 #define MMC_1_2V_DDR_MODE	1
@@ -408,6 +400,7 @@ struct mci_host {
 	unsigned f_max;		/**< host interface upper limit */
 	unsigned clock;		/**< Current clock used to talk to the card */
 	unsigned bus_width;	/**< used data bus width to the card */
+	enum mci_timing timing;	/**< used timing specification to the card */
 	unsigned max_req_size;
 	unsigned dsr_val;	/**< optional dsr value */
 	int use_dsr;		/**< optional dsr usage flag */
@@ -468,7 +461,6 @@ struct mci {
 	int dsr_imp;		/**< DSR implementation state from CSD */
 	char *ext_csd;
 	int probe;
-	struct param_d *param_probe;
 	struct param_d *param_boot;
 	int bootpart;
 
diff --git a/include/memory.h b/include/memory.h
index 73ee7661ef..906d9f7b26 100644
--- a/include/memory.h
+++ b/include/memory.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __MEM_MALLOC_H
 #define __MEM_MALLOC_H
 
diff --git a/include/memtest.h b/include/memtest.h
index 0100a6c58c..df0a391cc3 100644
--- a/include/memtest.h
+++ b/include/memtest.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __MEMTEST_H
 #define __MEMTEST_H
 
diff --git a/include/menu.h b/include/menu.h
index 2fef064499..77c496c65c 100644
--- a/include/menu.h
+++ b/include/menu.h
@@ -1,19 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * (C) Copyright 2009-2010 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __MENU_H__
diff --git a/include/mfd/pfuze.h b/include/mfd/pfuze.h
index 6045ceec0a..8e021680ef 100644
--- a/include/mfd/pfuze.h
+++ b/include/mfd/pfuze.h
@@ -1,6 +1,22 @@
 #ifndef __INCLUDE_PFUZE_H
 #define __INCLUDE_PFUZE_H
 
+#include <regmap.h>
+
+#ifdef CONFIG_REGULATOR_PFUZE
+/*
+ * For proper poweroff sequencing, users on imx6 needs to call
+ * poweroff_handler_register_fn(imx6_pm_stby_poweroff);
+ * inside of the callback, to ensure a proper poweroff sequence
+ */
 int pfuze_register_init_callback(void(*callback)(struct regmap *map));
 
+#else
+
+static inline int pfuze_register_init_callback(void(*callback)(struct regmap *map))
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* __INCLUDE_PFUZE_H */
diff --git a/include/mmu.h b/include/mmu.h
index 66b246f6d2..2e23853df3 100644
--- a/include/mmu.h
+++ b/include/mmu.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __MMU_H
 #define __MMU_H
 
diff --git a/include/module.h b/include/module.h
index 460a34fe2b..abf740a789 100644
--- a/include/module.h
+++ b/include/module.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __MODULE_H
 #define __MODULE_H
 
diff --git a/include/nand.h b/include/nand.h
index fb3b5a1088..f0114a227d 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __NAND_H__
 #define __NAND_H__
 
diff --git a/include/notifier.h b/include/notifier.h
index e0df3e666b..432b66c4ca 100644
--- a/include/notifier.h
+++ b/include/notifier.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __NOTIFIER_H
 #define __NOTIFIER_H
 
diff --git a/include/of.h b/include/of.h
index 67601ce80c..8d6c018b73 100644
--- a/include/of.h
+++ b/include/of.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __OF_H
 #define __OF_H
 
diff --git a/include/of_address.h b/include/of_address.h
index 350ecaec82..66117b1fa7 100644
--- a/include/of_address.h
+++ b/include/of_address.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __OF_ADDRESS_H
 #define __OF_ADDRESS_H
 
diff --git a/include/of_device.h b/include/of_device.h
index 54410ad12f..244f5fcbbb 100644
--- a/include/of_device.h
+++ b/include/of_device.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __OF_DEVICE_H
 #define __OF_DEVICE_H
 
diff --git a/include/of_gpio.h b/include/of_gpio.h
index 95a454c683..9076c81e54 100644
--- a/include/of_gpio.h
+++ b/include/of_gpio.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * OF helpers for the GPIO API
  *
  * based on Linux OF_GPIO API
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __OF_GPIO_H
diff --git a/include/of_graph.h b/include/of_graph.h
index 254dd2ca28..ef3fb8b94a 100644
--- a/include/of_graph.h
+++ b/include/of_graph.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * OF graph binding parsing helpers
  *
@@ -6,10 +7,6 @@
  *
  * Copyright (C) 2012 Renesas Electronics Corp.
  * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
  */
 #ifndef __LINUX_OF_GRAPH_H
 #define __LINUX_OF_GRAPH_H
diff --git a/include/of_mtd.h b/include/of_mtd.h
index 9f5b8a2796..6dbc3d8673 100644
--- a/include/of_mtd.h
+++ b/include/of_mtd.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * OF helpers for mtd.
- *
- * This file is released under the GPLv2
  */
 
 #ifndef __LINUX_OF_MTD_H
diff --git a/include/of_net.h b/include/of_net.h
index 0f6ef200d5..f37af58303 100644
--- a/include/of_net.h
+++ b/include/of_net.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * OF helpers for network devices.
- *
- * This file is released under the GPLv2
  */
 
 #ifndef __LINUX_OF_NET_H
diff --git a/include/of_pci.h b/include/of_pci.h
index c95cb0135a..c787150936 100644
--- a/include/of_pci.h
+++ b/include/of_pci.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __OF_PCI_H
 #define __OF_PCI_H
 
diff --git a/include/param.h b/include/param.h
index d75f50ea3e..6aca1b481d 100644
--- a/include/param.h
+++ b/include/param.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef PARAM_H
 #define PARAM_H
 
@@ -37,6 +38,8 @@ struct param_d {
 	enum param_type type;
 };
 
+enum param_tristate { PARAM_TRISTATE_UNKNOWN, PARAM_TRISTATE_TRUE, PARAM_TRISTATE_FALSE };
+
 #ifdef CONFIG_PARAMETER
 const char *get_param_type(struct param_d *param);
 const char *dev_get_param(struct device_d *dev, const char *name);
@@ -63,8 +66,6 @@ struct param_d *dev_add_param_enum(struct device_d *dev, const char *name,
 		int (*get)(struct param_d *p, void *priv),
 		int *value, const char * const *names, int max, void *priv);
 
-enum param_tristate { PARAM_TRISTATE_UNKNOWN, PARAM_TRISTATE_TRUE, PARAM_TRISTATE_FALSE };
-
 struct param_d *dev_add_param_tristate(struct device_d *dev, const char *name,
 		int (*set)(struct param_d *p, void *priv),
 		int (*get)(struct param_d *p, void *priv),
@@ -118,7 +119,7 @@ static inline struct param_d *dev_add_param(struct device_d *dev, const char *na
 		const char *(*get)(struct device_d *, struct param_d *p),
 		unsigned long flags)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_string(struct device_d *dev, const char *name,
@@ -126,7 +127,7 @@ static inline struct param_d *dev_add_param_string(struct device_d *dev, const c
 		int (*get)(struct param_d *p, void *priv),
 		char **value, void *priv)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *__dev_add_param_int(struct device_d *dev, const char *name,
@@ -134,7 +135,7 @@ static inline struct param_d *__dev_add_param_int(struct device_d *dev, const ch
 		int (*get)(struct param_d *p, void *priv),
 		void *value, enum param_type type, const char *format, void *priv)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_enum(struct device_d *dev, const char *name,
@@ -143,7 +144,7 @@ static inline struct param_d *dev_add_param_enum(struct device_d *dev, const cha
 		int *value, const char * const *names, int max, void *priv)
 
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_bitmask(struct device_d *dev, const char *name,
@@ -151,7 +152,7 @@ static inline struct param_d *dev_add_param_bitmask(struct device_d *dev, const
                 int (*get)(struct param_d *p, void *priv),
                 unsigned long *value, const char * const *names, int max, void *priv)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_tristate(struct device_d *dev, const char *name,
@@ -159,13 +160,13 @@ static inline struct param_d *dev_add_param_tristate(struct device_d *dev, const
 		int (*get)(struct param_d *p, void *priv),
 		int *value, void *priv)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_tristate_ro(struct device_d *dev, const char *name,
 		int *value)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_ip(struct device_d *dev, const char *name,
@@ -173,7 +174,7 @@ static inline struct param_d *dev_add_param_ip(struct device_d *dev, const char
 		int (*get)(struct param_d *p, void *priv),
 		IPaddr_t *ip, void *priv)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_mac(struct device_d *dev, const char *name,
@@ -181,13 +182,13 @@ static inline struct param_d *dev_add_param_mac(struct device_d *dev, const char
 		int (*get)(struct param_d *p, void *priv),
 		u8 *mac, void *priv)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline struct param_d *dev_add_param_fixed(struct device_d *dev, const char *name,
 						  const char *value)
 {
-	return ERR_PTR(-ENOSYS);
+	return NULL;
 }
 
 static inline void dev_remove_param(struct param_d *p) {}
diff --git a/include/parseopt.h b/include/parseopt.h
index 273a371ac3..5a40bdc219 100644
--- a/include/parseopt.h
+++ b/include/parseopt.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __PARSEOPT_H__
 #define __PARSEOPT_H__
 void parseopt_llu_suffix(const char *options, const char *opt,
diff --git a/include/part.h b/include/part.h
index d4d40f6ec9..66cc93ae96 100644
--- a/include/part.h
+++ b/include/part.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
  */
 #ifndef _PART_H
 #define _PART_H
diff --git a/include/partition.h b/include/partition.h
index 32570530eb..373134afad 100644
--- a/include/partition.h
+++ b/include/partition.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __PARTITION_H
 #define __PARTITION_H
 
diff --git a/include/password.h b/include/password.h
index 8b9961815f..e259a87da1 100644
--- a/include/password.h
+++ b/include/password.h
@@ -1,18 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2008-2010 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __PASSWORD_H__
diff --git a/include/pbl.h b/include/pbl.h
index 787bd8293f..f84ed3b7bf 100644
--- a/include/pbl.h
+++ b/include/pbl.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2
  */
 
 #ifndef __PBL_H__
diff --git a/include/phy-id-list.h b/include/phy-id-list.h
index a6070a0248..f770c775b8 100644
--- a/include/phy-id-list.h
+++ b/include/phy-id-list.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * List of all Etherenet PHY IDs that is not found in any .h files in
  * include/linux
diff --git a/include/pinctrl.h b/include/pinctrl.h
index 7d8716996d..0fd7f49118 100644
--- a/include/pinctrl.h
+++ b/include/pinctrl.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef PINCTRL_H
 #define PINCTRL_H
 
diff --git a/include/poller.h b/include/poller.h
index 35a2271d69..b22b8a1b89 100644
--- a/include/poller.h
+++ b/include/poller.h
@@ -1,8 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2010 Marc Kleine-Budde <mkl@pengutronix.de>
- *
- * This file is released under the GPLv2
- *
  */
 
 #ifndef POLLER_H
diff --git a/include/poweroff.h b/include/poweroff.h
index ae9557db5d..217b68cdf9 100644
--- a/include/poweroff.h
+++ b/include/poweroff.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __INCLUDE_POWEROFF_H
 #define __INCLUDE_POWEROFF_H
 
diff --git a/include/printk.h b/include/printk.h
index b0d5d09f83..6a027175ab 100644
--- a/include/printk.h
+++ b/include/printk.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __PRINTK_H
 #define __PRINTK_H
 
diff --git a/include/progress.h b/include/progress.h
index 5c4dd1e775..75aa9c4f86 100644
--- a/include/progress.h
+++ b/include/progress.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __PROGRSS_H
 #define __PROGRSS_H
 
diff --git a/include/pwm.h b/include/pwm.h
index 911c760839..ca01f5b53d 100644
--- a/include/pwm.h
+++ b/include/pwm.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __PWM_H
 #define __PWM_H
 
@@ -66,7 +67,7 @@ struct pwm_ops {
 struct pwm_chip {
 	int			id;
 	const char		*devname;
-	struct pwm_ops		*ops;
+	const struct pwm_ops	*ops;
 	int			duty_ns;
 	int			period_ns;
 };
diff --git a/include/qsort.h b/include/qsort.h
index d279dc2810..f8d889ea1e 100644
--- a/include/qsort.h
+++ b/include/qsort.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __QSORT_H
 #define __QSORT_H
 
diff --git a/include/ratp.h b/include/ratp.h
index d2a8192357..effa288b42 100644
--- a/include/ratp.h
+++ b/include/ratp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __RATP_H
 #define __RATP_H
 
diff --git a/include/ratp_bb.h b/include/ratp_bb.h
index b6699979b6..a4f28c642c 100644
--- a/include/ratp_bb.h
+++ b/include/ratp_bb.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __RATP_BB_H
 #define __RATP_BB_H
 
diff --git a/include/readkey.h b/include/readkey.h
index ed1cd1542d..fdb96426e0 100644
--- a/include/readkey.h
+++ b/include/readkey.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef READKEY_H
 #define READKEY_H
 
diff --git a/include/regmap.h b/include/regmap.h
index 09b7b57d52..3bcd9fe038 100644
--- a/include/regmap.h
+++ b/include/regmap.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __REGMAP_H
 #define __REGMAP_H
 
@@ -37,10 +38,63 @@ struct regmap_bus {
 	regmap_hw_reg_read reg_read;
 };
 
+struct device_d;
+struct device_node;
+
 struct regmap *regmap_init(struct device_d *dev,
 			     const struct regmap_bus *bus,
 			     void *bus_context,
 			     const struct regmap_config *config);
+
+struct clk;
+
+/**
+ * of_regmap_init_mmio_clk() - Initialise register map with register clock
+ *
+ * @np: Device node that will be interacted with
+ * @clk_id: register clock consumer ID
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+struct regmap *of_regmap_init_mmio_clk(struct device_node *np, const char *clk_id,
+				       void __iomem *regs,
+				       const struct regmap_config *config);
+
+/**
+ * regmap_init_mmio_clk() - Initialise register map with register clock
+ *
+ * @dev: Device that will be interacted with
+ * @clk_id: register clock consumer ID
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+struct regmap *regmap_init_mmio_clk(struct device_d *dev, const char *clk_id,
+				    void __iomem *regs,
+				    const struct regmap_config *config);
+
+/**
+ * regmap_init_mmio() - Initialise register map
+ *
+ * @dev: Device that will be interacted with
+ * @regs: Pointer to memory-mapped IO region
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+#define regmap_init_mmio(dev, regs, config)		\
+	regmap_init_mmio_clk(dev, NULL, regs, config)
+
+
+int regmap_mmio_attach_clk(struct regmap *map, struct clk *clk);
+void regmap_mmio_detach_clk(struct regmap *map);
+
 void regmap_exit(struct regmap *map);
 
 struct regmap *dev_get_regmap(struct device_d *dev, const char *name);
diff --git a/include/regulator.h b/include/regulator.h
index a445c5c3d1..d01535df52 100644
--- a/include/regulator.h
+++ b/include/regulator.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __REGULATOR_H
 #define __REGULATOR_H
 
diff --git a/include/reset_source.h b/include/reset_source.h
index 305dde0102..8795029315 100644
--- a/include/reset_source.h
+++ b/include/reset_source.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __INCLUDE_RESET_SOURCE_H
diff --git a/include/restart.h b/include/restart.h
index 79b57c8e11..7ec0910e94 100644
--- a/include/restart.h
+++ b/include/restart.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __INCLUDE_RESTART_H
 #define __INCLUDE_RESTART_H
 
diff --git a/include/rtc.h b/include/rtc.h
index 600dc46c41..3190ea20da 100644
--- a/include/rtc.h
+++ b/include/rtc.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2001
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 /*
diff --git a/include/s_record.h b/include/s_record.h
index 84b4719519..190850beed 100644
--- a/include/s_record.h
+++ b/include/s_record.h
@@ -1,20 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 /*--------------------------------------------------------------------------
diff --git a/include/scsi.h b/include/scsi.h
index 59d47393c8..ede1907962 100644
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -1,21 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * (C) Copyright 2001
  * Denis Peter, MPL AG Switzerland
  *
  * See file CREDITS for list of people who contributed to this
  * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
  */
  #ifndef _SCSI_H
  #define _SCSI_H
diff --git a/include/serdev.h b/include/serdev.h
index 29030538e5..0d020b8e82 100644
--- a/include/serdev.h
+++ b/include/serdev.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _SERDEV_H_
 #define _SERDEV_H_
 
diff --git a/include/shell.h b/include/shell.h
index 65dad0e1d1..073f18102b 100644
--- a/include/shell.h
+++ b/include/shell.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * (C) Copyright 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
  */
 
 #ifndef __SHELL_H__
diff --git a/include/sntp.h b/include/sntp.h
index bfcfcfa8c8..05cad129cd 100644
--- a/include/sntp.h
+++ b/include/sntp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __SNTP_H
 #define __SNTP_H
 
diff --git a/include/spi/eeprom.h b/include/spi/eeprom.h
index 15495e59f5..1afeeede98 100644
--- a/include/spi/eeprom.h
+++ b/include/spi/eeprom.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _SPI_EEPROM_H
 #define _SPI_EEPROM_H
 
@@ -10,7 +11,7 @@
  */
 struct spi_eeprom {
 	char		name[10];
-	u16		page_size;		/* for writes */
+	u32		page_size;		/* for writes */
 	u16		flags;
 #define	EE_ADDR1	0x0001			/*  8 bit addrs */
 #define	EE_ADDR2	0x0002			/* 16 bit addrs */
diff --git a/include/spi/flash.h b/include/spi/flash.h
index c1204e7e61..796d649d9a 100644
--- a/include/spi/flash.h
+++ b/include/spi/flash.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef LINUX_SPI_FLASH_H
 #define LINUX_SPI_FLASH_H
 
diff --git a/include/spi/imx-spi.h b/include/spi/imx-spi.h
index a592573e62..568795188c 100644
--- a/include/spi/imx-spi.h
+++ b/include/spi/imx-spi.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __SPI_IMX_SPI_H
 #define __SPI_IMX_SPI_H
 
diff --git a/include/spi/spi.h b/include/spi/spi.h
index bdcda0bb60..48a90bcca7 100644
--- a/include/spi/spi.h
+++ b/include/spi/spi.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __INCLUDE_SPI_H
 #define __INCLUDE_SPI_H
 
diff --git a/include/spi/spi_gpio.h b/include/spi/spi_gpio.h
index 841c934f6e..a18b7dbe07 100644
--- a/include/spi/spi_gpio.h
+++ b/include/spi/spi_gpio.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * SPI master driver using generic bitbanged GPIO
  *
@@ -5,16 +6,6 @@
  *
  * Based on Linux driver
  *   Copyright (C) 2006,2008 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __SPI_GPIO_H
diff --git a/include/state.h b/include/state.h
index d98b781c20..be1b592576 100644
--- a/include/state.h
+++ b/include/state.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __STATE_H
 #define __STATE_H
 
diff --git a/include/stdio.h b/include/stdio.h
index 46e277889d..1cb11e88de 100644
--- a/include/stdio.h
+++ b/include/stdio.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __STDIO_H
 #define __STDIO_H
 
diff --git a/include/stdlib.h b/include/stdlib.h
index ee3f229968..d405608724 100644
--- a/include/stdlib.h
+++ b/include/stdlib.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __STDLIB_H
 #define __STDLIB_H
 
diff --git a/include/stmp-device.h b/include/stmp-device.h
index 9b5bee4712..256856c589 100644
--- a/include/stmp-device.h
+++ b/include/stmp-device.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * basic functions for devices following the "stmp" style register layout
  *
  * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __STMP_DEVICE_H__
diff --git a/include/string.h b/include/string.h
index 8c63f22491..120a613d46 100644
--- a/include/string.h
+++ b/include/string.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __STRING_H
 #define __STRING_H
 
diff --git a/include/stringlist.h b/include/stringlist.h
index e85500a994..5cd452ca5f 100644
--- a/include/stringlist.h
+++ b/include/stringlist.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __STRINGLIST_H
 #define __STRINGLIST_H
 
diff --git a/include/tee/optee.h b/include/tee/optee.h
index 8cfe06d889..fa124236ba 100644
--- a/include/tee/optee.h
+++ b/include/tee/optee.h
@@ -10,6 +10,9 @@
 #ifndef _OPTEE_H
 #define _OPTEE_H
 
+#include <types.h>
+#include <asm-generic/errno.h>
+
 #define OPTEE_MAGIC             0x4554504f
 #define OPTEE_VERSION           1
 #define OPTEE_ARCH_ARM32        0
@@ -27,4 +30,12 @@ struct optee_header {
 	uint32_t paged_size;
 };
 
+int optee_verify_header (struct optee_header *hdr);
+
+#ifdef __PBL__
+
+int start_optee_early(void* fdt, void* tee);
+
+#endif /* __PBL__ */
+
 #endif /* _OPTEE_H */
diff --git a/include/twl6030_pwrbtn.h b/include/twl6030_pwrbtn.h
index c4e13d1f1d..4c8e166256 100644
--- a/include/twl6030_pwrbtn.h
+++ b/include/twl6030_pwrbtn.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _TWL6030_PWRBTN_H
 #define _TWL6030_PWRBTN_H
 
diff --git a/include/types.h b/include/types.h
index 0bfe3b9a0b..a6739394e0 100644
--- a/include/types.h
+++ b/include/types.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __TYPES_H
 #define __TYPES_H
 
diff --git a/include/ubiformat.h b/include/ubiformat.h
index 8a7a16ac18..eca62ae6db 100644
--- a/include/ubiformat.h
+++ b/include/ubiformat.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __UBIFORMAT_H
 #define __UBIFORMAT_H
 
diff --git a/include/uimagefs.h b/include/uimagefs.h
index 3f58589b73..6b34982e4e 100644
--- a/include/uimagefs.h
+++ b/include/uimagefs.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * under GPLv2 only
  */
 
 #ifndef __UIMAGEFS_H__
diff --git a/include/uncompress.h b/include/uncompress.h
index d146c90768..4bdb03d4f5 100644
--- a/include/uncompress.h
+++ b/include/uncompress.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __UNCOMPRESS_H
 #define __UNCOMPRESS_H
 
diff --git a/include/unistd.h b/include/unistd.h
index f392e6dd6c..06ce355809 100644
--- a/include/unistd.h
+++ b/include/unistd.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __UNISTD_H
 #define __UNISTD_H
 
diff --git a/include/usb_dfu_trailer.h b/include/usb_dfu_trailer.h
index 2cf66a590c..64b8407275 100644
--- a/include/usb_dfu_trailer.h
+++ b/include/usb_dfu_trailer.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef _USB_DFU_TRAILER_H
 #define _USB_DFU_TRAILER_H
 
diff --git a/include/w1_mac_address.h b/include/w1_mac_address.h
index cd4be765f7..1ee0ad27c9 100644
--- a/include/w1_mac_address.h
+++ b/include/w1_mac_address.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
- *
- * Under GPLv2 only
  */
 
 #ifndef __W1_MAC_ADDRESS_H__
diff --git a/include/watchdog.h b/include/watchdog.h
index 9741570ce2..419c1cdf46 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -1,14 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 
 #ifndef INCLUDE_WATCHDOG_H
 # define INCLUDE_WATCHDOG_H
diff --git a/include/wchar.h b/include/wchar.h
index adb4f373e9..b601cc6207 100644
--- a/include/wchar.h
+++ b/include/wchar.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __WCHAR_H
 #define __WCHAR_H
 
diff --git a/include/xfuncs.h b/include/xfuncs.h
index e3f120a040..a9132d3787 100644
--- a/include/xfuncs.h
+++ b/include/xfuncs.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 #ifndef __XFUNCS_H
 #define __XFUNCS_H
 
diff --git a/include/xymodem.h b/include/xymodem.h
index 917cecc003..89444f5c5e 100644
--- a/include/xymodem.h
+++ b/include/xymodem.h
@@ -1,17 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * Handles the X-Modem, Y-Modem and Y-Modem/G protocols
  *
  * Copyright (C) 2008 Robert Jarzmik
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef _XYMODEM_
diff --git a/lib/Kconfig.ubsan b/lib/Kconfig.ubsan
index 09f4a0ab8a..22958f4801 100644
--- a/lib/Kconfig.ubsan
+++ b/lib/Kconfig.ubsan
@@ -9,9 +9,10 @@ config UBSAN
 	  Compile-time instrumentation is used to detect various undefined
 	  behaviours in runtime.
 
+if UBSAN
+
 config UBSAN_SANITIZE_ALL
 	bool "Enable instrumentation for all of barebox"
-	depends on UBSAN
 	depends on ARCH_HAS_UBSAN_SANITIZE_ALL
 	default y
 	help
@@ -23,7 +24,6 @@ config UBSAN_SANITIZE_ALL
 
 config UBSAN_NO_ALIGNMENT
 	bool "Disable checking of pointers alignment"
-	depends on UBSAN
 	default y if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	help
 	  This option disables the check of unaligned memory accesses.
@@ -33,3 +33,5 @@ config UBSAN_NO_ALIGNMENT
 
 config UBSAN_ALIGNMENT
 	def_bool !UBSAN_NO_ALIGNMENT
+
+endif
diff --git a/scripts/bareboximd.c b/scripts/bareboximd.c
index 5ef91831c4..e5000e0aea 100644
--- a/scripts/bareboximd.c
+++ b/scripts/bareboximd.c
@@ -16,10 +16,6 @@
  *
  */
 
-#define __ALIGN_MASK(x, mask)	(((x) + (mask)) & ~(mask))
-#define ALIGN(x, a)		__ALIGN_MASK(x, (typeof(x))(a) - 1)
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
 #include <stdio.h>
 #include <sys/types.h>
 #include <stdint.h>
@@ -33,6 +29,7 @@
 #include <errno.h>
 #include <stdarg.h>
 #include <linux/err.h>
+#include <linux/kernel.h>
 
 #include "../include/image-metadata.h"
 
@@ -57,6 +54,35 @@ int imd_command_setenv(const char *variable_name, const char *value)
 	return -EINVAL;
 }
 
+static int write_file(const char *filename, const void *buf, size_t size)
+{
+	int fd, ret;
+	int now;
+
+	fd = open(filename, O_WRONLY | O_TRUNC | O_CREAT);
+	if (fd < 0)
+		return fd;
+
+	while (size) {
+		now = write(fd, buf, size);
+		if (now == 0) {
+			errno = ENOSPC;
+			return -1;
+		}
+		if (now < 0)
+			return now;
+		size -= now;
+		buf += now;
+	}
+
+	close(fd);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static int read_file_2(const char *filename, size_t *size, void **outbuf, size_t max_size)
 {
 	off_t fsize;
@@ -129,6 +155,8 @@ static unsigned long simple_strtoul(const char *cp, char **endp, unsigned int ba
 	return strtoul(cp, endp, base);
 }
 
+#include "../include/xfuncs.h"
+#include "../crypto/crc32.c"
 #include "../common/imd.c"
 
 static void usage(const char *prgname)
@@ -140,6 +168,8 @@ static void usage(const char *prgname)
 "Options:\n"
 "-t <type>    only show information of <type>\n"
 "-n <no>      for tags with multiple strings only show string <no>\n"
+"-V           Verify checksum of FILE\n"
+"-c           Create checksum for FILE and write it to the crc32 tag\n"
 "\n"
 "Without options all information available is printed. Valid types are:\n"
 "release, build, model, of_compatible\n",
diff --git a/scripts/imx/imx-usb-loader.c b/scripts/imx/imx-usb-loader.c
index 70883bf883..08affe72c7 100644
--- a/scripts/imx/imx-usb-loader.c
+++ b/scripts/imx/imx-usb-loader.c
@@ -1228,7 +1228,7 @@ static int is_header(const unsigned char *p)
 			return 1;
 		break;
 	case HDR_MX53:
-		if (hdr->header.tag == TAG_IVT_HEADER && hdr->header.version == IVT_VERSION)
+		if (hdr->header.tag == TAG_IVT_HEADER && (hdr->header.version == IVT_VERSION || hdr->header.version == 0x41))
 			return 1;
 	}
 
@@ -1259,7 +1259,7 @@ static int perform_dcd(unsigned char *p, const unsigned char *file_start,
 }
 
 static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
-		unsigned cnt, unsigned *dladdr, unsigned *max_length, unsigned *plugin,
+		unsigned cnt, unsigned *max_length, unsigned *plugin,
 		unsigned *header_addr)
 {
 	const unsigned char *file_end = file_start + cnt;
@@ -1271,7 +1271,6 @@ static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
 		unsigned char* dcd;
 		int err = get_dcd_range_old(ohdr, file_start, cnt, &dcd, &dcd_end);
 
-		*dladdr = ohdr->app_dest;
 		*header_addr = ohdr->dcd_ptr_ptr - offsetof(struct imx_flash_header, dcd);
 		*plugin = 0;
 		if (err >= 0)
@@ -1284,7 +1283,6 @@ static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
 		unsigned char *bd;
 		struct imx_flash_header_v2 *hdr = (struct imx_flash_header_v2 *)p;
 
-		*dladdr = hdr->self;
 		*header_addr = hdr->self;
 		bd = hdr->boot_data_ptr + cvt_dest_to_src;
 		if ((bd < file_start) || ((bd + 4) > file_end)) {
@@ -1292,7 +1290,6 @@ static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
 			return -1;
 		}
 
-		*dladdr = ((struct imx_boot_data *)bd)->start;
 		*max_length = ((struct imx_boot_data *)bd)->size;
 		*plugin = ((struct imx_boot_data *)bd)->plugin;
 		((struct imx_boot_data *)bd)->plugin = 0;
@@ -1304,7 +1301,7 @@ static int get_dl_start(const unsigned char *p, const unsigned char *file_start,
 }
 
 static int process_header(struct usb_work *curr, unsigned char *buf, int cnt,
-		unsigned *p_dladdr, unsigned *p_max_length, unsigned *p_plugin,
+		unsigned *p_max_length, unsigned *p_plugin,
 		unsigned *p_header_addr)
 {
 	int ret;
@@ -1319,7 +1316,7 @@ static int process_header(struct usb_work *curr, unsigned char *buf, int cnt,
 		if (!is_header(p))
 			continue;
 
-		ret = get_dl_start(p, buf, cnt, p_dladdr, p_max_length, p_plugin, p_header_addr);
+		ret = get_dl_start(p, buf, cnt, p_max_length, p_plugin, p_header_addr);
 		if (ret < 0) {
 			printf("!!get_dl_start returned %i\n", ret);
 			return ret;
@@ -1359,15 +1356,12 @@ static int do_irom_download(struct usb_work *curr, int verify)
 	unsigned char type;
 	unsigned fsize = 0;
 	unsigned header_offset;
-	unsigned file_base;
 	unsigned char *buf = NULL;
 	unsigned char *image;
 	unsigned char *verify_buffer = NULL;
-	unsigned dladdr = 0;
 	unsigned max_length;
 	unsigned plugin = 0;
 	unsigned header_addr = 0;
-	unsigned skip = 0;
 
 	ret = read_file(curr->filename, &buf, &fsize);
 	if (ret < 0)
@@ -1375,8 +1369,7 @@ static int do_irom_download(struct usb_work *curr, int verify)
 
 	max_length = fsize;
 
-	ret = process_header(curr, buf, fsize,
-			&dladdr, &max_length, &plugin, &header_addr);
+	ret = process_header(curr, buf, fsize, &max_length, &plugin, &header_addr);
 	if (ret < 0)
 		goto cleanup;
 
@@ -1388,31 +1381,8 @@ static int do_irom_download(struct usb_work *curr, int verify)
 		goto cleanup;
 	}
 
-	if (!dladdr) {
-		printf("unknown load address\n");
-		ret = -3;
-		goto cleanup;
-	}
-
-	file_base = header_addr - header_offset;
-
-	if (usb_id->mach_id->mode == MODE_BULK) {
-		/* No jump command, dladdr should point to header */
-		dladdr = header_addr;
-	}
-
-	if (file_base > dladdr) {
-		max_length -= (file_base - dladdr);
-		dladdr = file_base;
-	}
-
-	skip = dladdr - file_base;
-
-	image = buf + skip;
-	fsize -= skip;
-
-	if (fsize > max_length)
-		fsize = max_length;
+	image = buf + header_offset;
+	fsize -= header_offset;
 
 	type = FT_APP;
 
@@ -1433,10 +1403,10 @@ static int do_irom_download(struct usb_work *curr, int verify)
 		}
 	}
 
-	printf("loading binary file(%s) to 0x%08x, skip=0x%x, fsize=%u type=%d...\n",
-			curr->filename, dladdr, skip, fsize, type);
+	printf("loading binary file(%s) to 0x%08x, fsize=%u type=%d...\n",
+			curr->filename, header_addr, fsize, type);
 
-	ret = load_file(image, fsize, dladdr, type);
+	ret = load_file(image, fsize, header_addr, type);
 	if (ret < 0)
 		goto cleanup;
 
@@ -1445,7 +1415,7 @@ static int do_irom_download(struct usb_work *curr, int verify)
 	if (verify) {
 		printf("verifying file...\n");
 
-		ret = verify_memory(image, fsize, dladdr);
+		ret = verify_memory(image, fsize, header_addr);
 		if (ret < 0) {
 			printf("verifying failed\n");
 			goto cleanup;
@@ -1459,7 +1429,7 @@ static int do_irom_download(struct usb_work *curr, int verify)
 			 * so we load part of the image again with type FT_APP
 			 * this time.
 			 */
-			ret = load_file(verify_buffer, 64, dladdr, FT_APP);
+			ret = load_file(verify_buffer, 64, header_addr, FT_APP);
 			if (ret < 0)
 				goto cleanup;
 
diff --git a/scripts/imx/imx.c b/scripts/imx/imx.c
index d702c900b3..980173950f 100644
--- a/scripts/imx/imx.c
+++ b/scripts/imx/imx.c
@@ -334,7 +334,6 @@ static int do_hab(struct config_data *data, int argc, char *argv[])
 
 static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
 {
-	const char *type;
 	char *str;
 	int ret;
 	uint32_t signed_size = data->load_size;
diff --git a/scripts/include/linux/kernel.h b/scripts/include/linux/kernel.h
index 5d94e984f1..dc2e64e164 100644
--- a/scripts/include/linux/kernel.h
+++ b/scripts/include/linux/kernel.h
@@ -6,6 +6,8 @@
 #include <stdlib.h>
 #include <assert.h>
 
+#define __ALIGN_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+#define ALIGN(x, a)		__ALIGN_MASK(x, (typeof(x))(a) - 1)
 #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
 
 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))