diff options
| -rw-r--r-- | arch/arm/cpu/start.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap/devices-gpmc-nand.c | 2 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_imx.c | 2 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 2 | ||||
| -rw-r--r-- | scripts/mod/modpost.c | 2 |
5 files changed, 5 insertions, 5 deletions
diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c index ede8fd1f09..c7462f6e2e 100644 --- a/arch/arm/cpu/start.c +++ b/arch/arm/cpu/start.c @@ -108,7 +108,7 @@ void __naked __bare_init reset(void) /* * Board code can jump here by either returning from board_init_lowlevel - * or by calling this funtion directly. + * or by calling this function directly. */ void __naked __section(.text_ll_return) board_init_lowlevel_return(void) { diff --git a/arch/arm/mach-omap/devices-gpmc-nand.c b/arch/arm/mach-omap/devices-gpmc-nand.c index 0fc32f1d07..cf87b57d7f 100644 --- a/arch/arm/mach-omap/devices-gpmc-nand.c +++ b/arch/arm/mach-omap/devices-gpmc-nand.c @@ -49,7 +49,7 @@ static struct gpmc_nand_platform_data nand_plat = { /** * @brief gpmc_generic_nand_devices_init - init generic nand device * - * @return success/fail based on device funtion + * @return success/fail based on device function */ int gpmc_generic_nand_devices_init(int cs, int width, enum gpmc_ecc_mode eccmode, struct gpmc_config *nand_cfg) diff --git a/drivers/mtd/nand/nand_imx.c b/drivers/mtd/nand/nand_imx.c index 85cfbeda95..e75ffbc819 100644 --- a/drivers/mtd/nand/nand_imx.c +++ b/drivers/mtd/nand/nand_imx.c @@ -1135,7 +1135,7 @@ static int __init imxnd_probe(struct device_d *dev) this->ecc.layout = oob_smallpage; - /* NAND bus width determines access funtions used by upper layer */ + /* NAND bus width determines access functions used by upper layer */ if (pdata->width == 2) { this->options |= NAND_BUSWIDTH_16; this->ecc.layout = &nandv1_hw_eccoob_smallpage; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8e208765f7..2a1c4ff67b 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -313,7 +313,7 @@ struct nand_buffers { * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad - * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific funtion for controlling + * @cmd_ctrl: [BOARDSPECIFIC] hardwarespecific function for controlling * ALE/CLE/nCE. Also used to write command and address * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line * If set to NULL no access to ready/busy is available and the ready/busy information diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index e99448602c..795ee8d09b 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -604,7 +604,7 @@ static int strrcmp(const char *s, const char *sub) * Whitelist to allow certain references to pass with no warning. * * Pattern 0: - * Do not warn if funtion/data are marked with __init_refok/__initdata_refok. + * Do not warn if function/data are marked with __init_refok/__initdata_refok. * The pattern is identified by: * fromsec = .text.init.refok | .data.init.refok * |