1 files changed, 0 insertions, 150 deletions
diff --git a/arch/arm/boards/a9m2410/a9m2410.c b/arch/arm/boards/a9m2410/a9m2410.c
deleted file mode 100644
index 44cf51b212..0000000000
--- a/arch/arm/boards/a9m2410/a9m2410.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright (C) 2009 Juergen Beisert, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#include <common.h>
-#include <driver.h>
-#include <init.h>
-#include <asm/armlinux.h>
-#include <generated/mach-types.h>
-#include <asm/sections.h>
-#include <partition.h>
-#include <nand.h>
-#include <io.h>
-#include <mach/devices-s3c24xx.h>
-#include <mach/s3c-iomap.h>
-#include <mach/s3c24xx-nand.h>
-#include <mach/s3c-generic.h>
-#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
-
-// {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
-static struct s3c24x0_nand_platform_data nand_info = {
-	.nand_timing = CALC_NFCONF_TIMING(A9M2410_TACLS, A9M2410_TWRPH0, A9M2410_TWRPH1)
-};
-
-static int a9m2410_mem_init(void)
-{
-	resource_size_t size;
-
-	/*
-	 * Note: On this card the second SDRAM page is not used
-	 */
-	s3c24xx_disable_second_sdram_bank();
-	size = s3c24xx_get_memory_size();
-
-	/* ---------- configure the GPIOs ------------- */
-	writel(0x007FFFFF, S3C_GPACON);
-	writel(0x00000000, S3C_GPCCON);
-	writel(0x00000000, S3C_GPCUP);
-	writel(0x00000000, S3C_GPDCON);
-	writel(0x00000000, S3C_GPDUP);
-	writel(0xAAAAAAAA, S3C_GPECON);
-	writel(0x0000E03F, S3C_GPEUP);
-	writel(0x00000000, S3C_GPBCON);	/* all inputs */
-	writel(0x00000007, S3C_GPBUP);	/* pullup disabled for GPB0..3 */
-	writel(0x00009000, S3C_GPFCON);	/* GPF7 CLK_INT#, GPF6 Debug-LED */
-	writel(0x000000FF, S3C_GPFUP);
-	writel(readl(S3C_GPGDAT) | 0x0010, S3C_GPGDAT);	/* switch off LCD backlight */
-	writel(0xFF00A938, S3C_GPGCON);	/* switch off USB device */
-	writel(0x0000F000, S3C_GPGUP);
-	writel(readl(S3C_GPHDAT) | 0x100, S3C_GPHDAT);	/* switch BOOTINT/GPIO_ON# to high */
-	writel(0x000007FF, S3C_GPHUP);
-	writel(0x0029FAAA, S3C_GPHCON);
-	/*
-	 * USB port1 normal, USB port0 normal, USB1 pads for device
-	 * PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1,
-	 * 2nd SDRAM bank off (only bank 1 is used)
-	 */
-	writel(0x40140, S3C_MISCCR);
-
-	arm_add_mem_device("ram0", S3C_SDRAM_BASE, size);
-
-	return 0;
-}
-mem_initcall(a9m2410_mem_init);
-
-static const struct devfs_partition a9m2410_nand0_partitions[] = {
-	{
-		.offset = 0,
-		.size = 0x40000,
-		.flags = DEVFS_PARTITION_FIXED,
-		.name = "self_raw",
-		.bbname = "self0",
-	}, {
-		.offset = DEVFS_PARTITION_APPEND,
-		.size = 0x20000,
-		.flags = DEVFS_PARTITION_FIXED,
-		.name = "env_raw",
-		.bbname = "env0",
-	}, {
-		/* sentinel */
-	}
-};
-
-static int a9m2410_devices_init(void)
-{
-	uint32_t reg;
-
-	/* ----------- configure the access to the outer space ---------- */
-	reg = readl(S3C_BWSCON);
-
-	/* CS#1 to access the network controller */
-	reg &= ~0xf0;
-	reg |= 0xe0;
-	writel(0x1350, S3C_BANKCON1);
-
-	/* CS#2 to the dual 16550 UART */
-	reg &= ~0xf00;
-	reg |= 0x400;
-	writel(0x0d50, S3C_BANKCON2);
-
-	writel(reg, S3C_BWSCON);
-
-	/* release the reset signal to the network and UART device */
-	reg = readl(S3C_MISCCR);
-	reg |= 0x10000;
-	writel(reg, S3C_MISCCR);
-
-	/* ----------- the devices the boot loader should work with -------- */
-	s3c24xx_add_nand(&nand_info);
-	/*
-	 * SMSC 91C111 network controller on the baseboard
-	 * connected to CS line 1 and interrupt line
-	 * GPIO3, data width is 32 bit
-	 */
-	add_generic_device("smc91c111", DEVICE_ID_DYNAMIC, NULL, S3C_CS1_BASE + 0x300,
-			16, IORESOURCE_MEM, NULL);
-
-	if (IS_ENABLED(CONFIG_NAND))
-		devfs_create_partitions("nand0", a9m2410_nand0_partitions);
-
-	armlinux_set_architecture(MACH_TYPE_A9M2410);
-
-	return 0;
-}
-
-device_initcall(a9m2410_devices_init);
-
-static int a9m2410_console_init(void)
-{
-	barebox_set_model("Digi A9M2410");
-	barebox_set_hostname("a9m2410");
-
-	s3c24xx_add_uart1();
-	return 0;
-}
-
-console_initcall(a9m2410_console_init);