diff options
Diffstat (limited to 'arch/arm/boards/a9m2440/a9m2410dev.c')
-rw-r--r-- | arch/arm/boards/a9m2440/a9m2410dev.c | 95 |
1 files changed, 0 insertions, 95 deletions
diff --git a/arch/arm/boards/a9m2440/a9m2410dev.c b/arch/arm/boards/a9m2440/a9m2410dev.c deleted file mode 100644 index b115c4a954..0000000000 --- a/arch/arm/boards/a9m2440/a9m2410dev.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Copyright (C) 2009 Juergen Beisert - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - */ - -/** - * @file - * @brief a9m2410dev Baseboad specific initialization routines - * - */ - -#include <common.h> -#include <driver.h> -#include <init.h> -#include <io.h> -#include <mach/s3c-iomap.h> -#include <mach/s3c-busctl.h> -#include <mach/s3c24xx-gpio.h> - -#include "baseboards.h" - -/** - * Initialize the CPU to be able to work with the a9m2410dev evaluation board - */ -int a9m2410dev_devices_init(void) -{ - unsigned int reg; - - /* ---------- configure the GPIOs ------------- */ - writel(0x007FFFFF, S3C_GPACON); - writel(0x00000000, S3C_GPCCON); - writel(0x00000000, S3C_GPCUP); - writel(0x00000000, S3C_GPDCON); - writel(0x00000000, S3C_GPDUP); - writel(0xAAAAAAAA, S3C_GPECON); - writel(0x0000E03F, S3C_GPEUP); - writel(0x00000000, S3C_GPBCON); /* all inputs */ - writel(0x00000007, S3C_GPBUP); /* pullup disabled for GPB0..3 */ - writel(0x00009000, S3C_GPFCON); /* GPF7 CLK_INT#, GPF6 Debug-LED */ - writel(0x000000FF, S3C_GPFUP); - writel(readl(S3C_GPGDAT) | 0x1010, S3C_GPGDAT); /* switch off IDLE_SW#, switch off LCD backlight */ - writel(0x0100A93A, S3C_GPGCON); /* switch on USB device */ - writel(0x0000F000, S3C_GPGUP); - writel(0x0029FAAA, S3C_GPHCON); - - writel((1 << 12) | (0 << 11), S3C_GPJDAT); - writel(0x0016aaaa, S3C_GPJCON); - writel(~((0<<12)| (1<<11)), S3C_GPJUP); - - writel((0 << 12) | (0 << 11), S3C_GPJDAT); - writel(0x0016aaaa, S3C_GPJCON); - writel(0x00001fff, S3C_GPJUP); - - writel(0x00000000, S3C_DSC0); - writel(0x00000000, S3C_DSC1); - - /* - * USB port1 normal, USB port0 normal, USB1 pads for device - * PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1, - */ - writel((readl(S3C_MISCCR) & ~0xFFFF) | 0x0140, S3C_MISCCR); - - /* ----------- configure the access to the outer space ---------- */ - reg = readl(S3C_BWSCON); - - /* CS#1 to access the network controller */ - reg &= ~0xf0; - reg |= 0xe0; - writel(0x1350, S3C_BANKCON1); - - /* CS#2 to the dual 16550 UART */ - reg &= ~0xf00; - reg |= 0x400; - writel(0x0d50, S3C_BANKCON2); - - writel(reg, S3C_BWSCON); - - /* release the reset signal to the network and UART device */ - reg = readl(S3C_MISCCR); - reg |= 0x10000; - writel(reg, S3C_MISCCR); - - return 0; -} |