diff options
Diffstat (limited to 'arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c')
-rw-r--r-- | arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 343 |
1 files changed, 343 insertions, 0 deletions
diff --git a/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c new file mode 100644 index 0000000000..7f1c782f1e --- /dev/null +++ b/arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2007 Sascha Hauer, Pengutronix + * 2009 Marc Kleine-Budde, Pengutronix + * (c) 2010 Eukrea Electromatique, Eric BĂ©nard <eric@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Derived from: + * + * * mx35_3stack.c - board file for uboot-v1 + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * + */ + +#include <common.h> +#include <command.h> +#include <environment.h> +#include <errno.h> +#include <fcntl.h> +#include <fec.h> +#include <fs.h> +#include <init.h> +#include <nand.h> +#include <net.h> +#include <partition.h> + +#include <asm/armlinux.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <asm/mmu.h> + +#include <mach/gpio.h> +#include <mach/imx-nand.h> +#include <mach/imx-regs.h> +#include <mach/iomux-mx35.h> +#include <mach/iomux-v3.h> +#include <mach/pmic.h> +#include <mach/imx-ipu-fb.h> +#include <mach/imx-pll.h> + +static struct fec_platform_data fec_info = { + .xcv_type = MII100, + .phy_addr = 0x1F, +}; + +static struct device_d fec_dev = { + .name = "fec_imx", + .map_base = IMX_FEC_BASE, + .platform_data = &fec_info, +}; + +static struct memory_platform_data sdram_pdata = { + .name = "ram0", + .flags = DEVFS_RDWR, +}; + +static struct device_d sdram_dev = { + .name = "mem", + .map_base = IMX_SDRAM_CS0, + .size = 128 * 1024 * 1024, + .platform_data = &sdram_pdata, +}; + +struct imx_nand_platform_data nand_info = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static struct device_d nand_dev = { + .name = "imx_nand", + .map_base = IMX_NFC_BASE, + .platform_data = &nand_info, +}; + +static struct fb_videomode imxfb_mode = { + .name = "CMO_QVGA", + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = KHZ2PICOS(7000), + .left_margin = 68, + .right_margin = 20, + .upper_margin = 15, + .lower_margin = 4, + .hsync_len = 30, + .vsync_len = 3, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct imx_ipu_fb_platform_data ipu_fb_data = { + .mode = &imxfb_mode, + .bpp = 16, +}; + +static struct device_d imxfb_dev = { + .name = "imx-ipu-fb", + .map_base = 0x53fc0000, + .size = 0x1000, + .platform_data = &ipu_fb_data, +}; + +#ifdef CONFIG_MMU +static int eukrea_cpuimx35_mmu_init(void) +{ + mmu_init(); + + arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED); + arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED); + + setup_dma_coherent(0x10000000); + +#if TEXT_BASE & (0x100000 - 1) +#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary +#else + arm_create_section(0x0, TEXT_BASE, 1, PMD_SECT_DEF_UNCACHED); +#endif + mmu_enable(); + +#ifdef CONFIG_CACHE_L2X0 + l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000); +#endif + return 0; +} +postcore_initcall(eukrea_cpuimx35_mmu_init); +#endif + +static int eukrea_cpuimx35_devices_init(void) +{ + register_device(&nand_dev); + + devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw"); + dev_add_bb_dev("self_raw", "self0"); + devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw"); + dev_add_bb_dev("env_raw", "env0"); + + register_device(&fec_dev); + + register_device(&sdram_dev); + register_device(&imxfb_dev); + + armlinux_add_dram(&sdram_dev); + armlinux_set_bootparams((void *)0x80000100); + armlinux_set_architecture(MACH_TYPE_EUKREA_CPUIMX35); + + return 0; +} + +device_initcall(eukrea_cpuimx35_devices_init); + +static int eukrea_cpuimx35_enable_display(void) +{ + gpio_direction_output(1, 1); + gpio_direction_output(0, 0); + return 0; +} + +late_initcall(eukrea_cpuimx35_enable_display); + +static struct device_d eukrea_cpuimx35_serial_device = { + .name = "imx_serial", + .map_base = IMX_UART1_BASE, + .size = 4096, +}; + +static struct pad_desc eukrea_cpuimx35_pads[] = { + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + + MX35_PAD_RXD1__UART1_RXD_MUX, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_CTS1__UART1_CTS, +}; + +static int eukrea_cpuimx35_console_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, + ARRAY_SIZE(eukrea_cpuimx35_pads)); + + register_device(&eukrea_cpuimx35_serial_device); + return 0; +} + +console_initcall(eukrea_cpuimx35_console_init); + +static int eukrea_cpuimx35_core_init(void) +{ + u32 reg; + + /* enable clock for I2C1 and FEC */ + reg = readl(IMX_CCM_BASE + CCM_CGR1); + reg |= 0x3 << CCM_CGR1_FEC_SHIFT; + reg = writel(reg, IMX_CCM_BASE + CCM_CGR1); + + /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/ + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, IMX_AIPS1_BASE); + writel(0x77777777, IMX_AIPS1_BASE + 0x4); + writel(0x77777777, IMX_AIPS2_BASE); + writel(0x77777777, IMX_AIPS2_BASE + 0x4); + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + writel(0x0, IMX_AIPS1_BASE + 0x40); + writel(0x0, IMX_AIPS1_BASE + 0x44); + writel(0x0, IMX_AIPS1_BASE + 0x48); + writel(0x0, IMX_AIPS1_BASE + 0x4C); + reg = readl(IMX_AIPS1_BASE + 0x50); + reg &= 0x00FFFFFF; + writel(reg, IMX_AIPS1_BASE + 0x50); + + writel(0x0, IMX_AIPS2_BASE + 0x40); + writel(0x0, IMX_AIPS2_BASE + 0x44); + writel(0x0, IMX_AIPS2_BASE + 0x48); + writel(0x0, IMX_AIPS2_BASE + 0x4C); + reg = readl(IMX_AIPS2_BASE + 0x50); + reg &= 0x00FFFFFF; + writel(reg, IMX_AIPS2_BASE + 0x50); + + /* MAX (Multi-Layer AHB Crossbar Switch) setup */ + + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ +#define MAX_PARAM1 0x00302154 + writel(MAX_PARAM1, IMX_MAX_BASE + 0x000); /* for S0 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */ + + /* SGPCR - always park on last master */ + writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */ + writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */ + writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */ + writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */ + writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */ + + /* MGPCR - restore default values */ + writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */ + writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */ + writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */ + writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */ + writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */ + writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */ + + /* + * M3IF Control Register (M3IFCTL) + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000 + * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000 + * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 + * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 + * ------------ + * 0x00000040 + */ + writel(0x40, IMX_M3IF_BASE); + + return 0; +} + +core_initcall(eukrea_cpuimx35_core_init); + +#define MPCTL_PARAM_399 (IMX_PLL_PD(0) | IMX_PLL_MFD(15) | IMX_PLL_MFI(8) | IMX_PLL_MFN(5)) +#define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1)) + +static int do_cpufreq(struct command *cmdtp, int argc, char *argv[]) +{ + unsigned long freq; + + if (argc != 2) + return COMMAND_ERROR_USAGE; + + freq = simple_strtoul(argv[1], NULL, 0); + + switch (freq) { + case 399: + writel(MPCTL_PARAM_399, IMX_CCM_BASE + CCM_MPCTL); + break; + case 532: + writel(MPCTL_PARAM_532, IMX_CCM_BASE + CCM_MPCTL); + break; + default: + return COMMAND_ERROR_USAGE; + } + + printf("Switched CPU frequency to %dMHz\n", freq); + + return 0; +} + +static const __maybe_unused char cmd_cpufreq_help[] = +"Usage: cpufreq 399|532\n" +"\n" +"Set CPU frequency to <freq> MHz\n"; + +BAREBOX_CMD_START(cpufreq) + .cmd = do_cpufreq, + .usage = "adjust CPU frequency", + BAREBOX_CMD_HELP(cmd_cpufreq_help) +BAREBOX_CMD_END |