diff options
Diffstat (limited to 'arch/arm/boards/freescale-mx35-3-stack/3stack.c')
| -rw-r--r-- | arch/arm/boards/freescale-mx35-3-stack/3stack.c | 498 |
1 files changed, 498 insertions, 0 deletions
diff --git a/arch/arm/boards/freescale-mx35-3-stack/3stack.c b/arch/arm/boards/freescale-mx35-3-stack/3stack.c new file mode 100644 index 0000000000..9a66976f9d --- /dev/null +++ b/arch/arm/boards/freescale-mx35-3-stack/3stack.c @@ -0,0 +1,498 @@ +/* + * Copyright (C) 2007 Sascha Hauer, Pengutronix + * 2009 Marc Kleine-Budde, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Derived from: + * + * * mx35_3stack.c - board file for uboot-v1 + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. + * + */ + +#include <common.h> +#include <environment.h> +#include <errno.h> +#include <fcntl.h> +#include <fec.h> +#include <fs.h> +#include <init.h> +#include <nand.h> +#include <net.h> +#include <partition.h> + +#include <asm/armlinux.h> +#include <asm/io.h> +#include <asm/mach-types.h> + +#include <mach/gpio.h> +#include <mach/imx-nand.h> +#include <mach/imx-regs.h> +#include <mach/iomux-mx35.h> +#include <mach/iomux-v3.h> +#include <mach/pmic.h> +#include <mach/imx-ipu-fb.h> +#include <mach/generic.h> + +#include <i2c/i2c.h> +#include <i2c/mc13892.h> +#include <i2c/mc9sdz60.h> + + +/* Board rev for the PDK 3stack */ +#define MX35PDK_BOARD_REV_1 0 +#define MX35PDK_BOARD_REV_2 1 + +static struct device_d cfi_dev = { + .name = "cfi_flash", + .map_base = IMX_CS0_BASE, + .size = 64 * 1024 * 1024, +}; + +static struct fec_platform_data fec_info = { + .xcv_type = MII100, + .phy_addr = 0x1F, +}; + +static struct device_d fec_dev = { + .name = "fec_imx", + .map_base = IMX_FEC_BASE, + .platform_data = &fec_info, +}; + +static struct memory_platform_data sdram_pdata = { + .name = "ram0", + .flags = DEVFS_RDWR, +}; + +static struct device_d sdram_dev = { + .name = "mem", + .map_base = IMX_SDRAM_CS0, + .size = 128 * 1024 * 1024, + .platform_data = &sdram_pdata, +}; + +struct imx_nand_platform_data nand_info = { + .hw_ecc = 1, + .flash_bbt = 1, +}; + +static struct device_d nand_dev = { + .name = "imx_nand", + .map_base = IMX_NFC_BASE, + .platform_data = &nand_info, +}; + +static struct device_d smc911x_dev = { + .name = "smc911x", + .map_base = IMX_CS5_BASE, + .size = IMX_CS5_RANGE, +}; + +static struct i2c_board_info i2c_devices[] = { + { + I2C_BOARD_INFO("mc13892", 0x08), + }, { + I2C_BOARD_INFO("mc9sdz60", 0x69), + }, +}; + +static struct device_d i2c_dev = { + .name = "i2c-imx", + .map_base = IMX_I2C1_BASE, +}; + +/* + * Generic display, shipped with the PDK + */ +static struct fb_videomode CTP_CLAA070LC0ACW = { + /* 800x480 @ 60 Hz */ + .name = "CTP-CLAA070LC0ACW", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = KHZ2PICOS(27000), + .left_margin = 50, + .right_margin = 50, /* whole line should have 900 clocks */ + .upper_margin = 10, + .lower_margin = 10, /* whole frame should have 500 lines */ + .hsync_len = 1, /* note: DE only display */ + .vsync_len = 1, /* note: DE only display */ + .sync = FB_SYNC_CLK_IDLE_EN | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct imx_ipu_fb_platform_data ipu_fb_data = { + .mode = &CTP_CLAA070LC0ACW, + .bpp = 16, +}; + +static struct device_d imxfb_dev = { + .name = "imx-ipu-fb", + .map_base = 0x53fc0000, + .size = 0x1000, + .platform_data = &ipu_fb_data, +}; + +/* + * Revision to be passed to kernel. The kernel provided + * by freescale relies on this. + * + * C --> CPU type + * S --> Silicon revision + * B --> Board rev + * + * 31 20 16 12 8 4 0 + * | Cmaj | Cmin | B | Smaj | Smin| + * + * e.g 0x00035120 --> i.MX35, Cpu silicon rev 2.0, Board rev 2 +*/ +static unsigned int imx35_3ds_system_rev = 0x00035000; + +static void set_silicon_rev( int rev) +{ + imx35_3ds_system_rev = imx35_3ds_system_rev | (rev & 0xFF); +} + +static void set_board_rev(int rev) +{ + imx35_3ds_system_rev = (imx35_3ds_system_rev & ~(0xF << 8)) | (rev & 0xF) << 8; +} + + +static int f3s_devices_init(void) +{ + uint32_t reg; + + /* CS0: Nor Flash */ + writel(0x0000cf03, CSCR_U(0)); + writel(0x10000d03, CSCR_L(0)); + writel(0x00720900, CSCR_A(0)); + + reg = readl(IMX_CCM_BASE + CCM_RCSR); + /* some fuses provide us vital information about connected hardware */ + if (reg & 0x20000000) + nand_info.width = 2; /* 16 bit */ + else + nand_info.width = 1; /* 8 bit */ + + /* + * This platform supports NOR and NAND + */ + register_device(&nand_dev); + register_device(&cfi_dev); + + switch ((reg >> 25) & 0x3) { + case 0x01: /* NAND is the source */ + devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw"); + dev_add_bb_dev("self_raw", "self0"); + devfs_add_partition("nand0", 0x40000, 0x80000, PARTITION_FIXED, "env_raw"); + dev_add_bb_dev("env_raw", "env0"); + break; + + case 0x00: /* NOR is the source */ + devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0"); + devfs_add_partition("nor0", 0x40000, 0x80000, PARTITION_FIXED, "env0"); + protect_file("/dev/env0", 1); + break; + } + + set_silicon_rev(imx_silicon_revision()); + + i2c_register_board_info(0, i2c_devices, ARRAY_SIZE(i2c_devices)); + register_device(&i2c_dev); + + register_device(&fec_dev); + register_device(&smc911x_dev); + + register_device(&sdram_dev); + register_device(&imxfb_dev); + + armlinux_add_dram(&sdram_dev); + armlinux_set_bootparams((void *)0x80000100); + armlinux_set_architecture(MACH_TYPE_MX35_3DS); + + return 0; +} + +device_initcall(f3s_devices_init); + +static int f3s_enable_display(void) +{ + /* Enable power to the LCD. (bit 6 hi.) */ + mc9sdz60_set_bits(mc9sdz60_get(), MC9SDZ60_REG_GPIO_1, 0x40, 0x40); + + return 0; +} + +late_initcall(f3s_enable_display); + +static struct device_d f3s_serial_device = { + .name = "imx_serial", + .map_base = IMX_UART1_BASE, + .size = 4096, +}; + +static struct pad_desc f3s_pads[] = { + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + + MX35_PAD_RXD1__UART1_RXD_MUX, + MX35_PAD_TXD1__UART1_TXD_MUX, + MX35_PAD_RTS1__UART1_RTS, + MX35_PAD_CTS1__UART1_CTS, + + MX35_PAD_I2C1_CLK__I2C1_SCL, + MX35_PAD_I2C1_DAT__I2C1_SDA, + + MX35_PAD_WDOG_RST__GPIO1_6, + MX35_PAD_COMPARE__GPIO1_5, + + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, +}; + +static int f3s_console_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(f3s_pads, ARRAY_SIZE(f3s_pads)); + + register_device(&f3s_serial_device); + return 0; +} + +console_initcall(f3s_console_init); + +static int f3s_core_init(void) +{ + u32 reg; + + writel(0x0000D843, CSCR_U(5)); /* CS5: smc9117 */ + writel(0x22252521, CSCR_L(5)); + writel(0x22220A00, CSCR_A(5)); + + /* enable clock for I2C1 and FEC */ + reg = readl(IMX_CCM_BASE + CCM_CGR1); + reg |= 0x3 << CCM_CGR1_FEC_SHIFT; + reg |= 0x3 << CCM_CGR1_I2C1_SHIFT; + reg = writel(reg, IMX_CCM_BASE + CCM_CGR1); + + /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/ + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + writel(0x77777777, IMX_AIPS1_BASE); + writel(0x77777777, IMX_AIPS1_BASE + 0x4); + writel(0x77777777, IMX_AIPS2_BASE); + writel(0x77777777, IMX_AIPS2_BASE + 0x4); + + /* + * Clear the on and off peripheral modules Supervisor Protect bit + * for SDMA to access them. Did not change the AIPS control registers + * (offset 0x20) access type + */ + writel(0x0, IMX_AIPS1_BASE + 0x40); + writel(0x0, IMX_AIPS1_BASE + 0x44); + writel(0x0, IMX_AIPS1_BASE + 0x48); + writel(0x0, IMX_AIPS1_BASE + 0x4C); + reg = readl(IMX_AIPS1_BASE + 0x50); + reg &= 0x00FFFFFF; + writel(reg, IMX_AIPS1_BASE + 0x50); + + writel(0x0, IMX_AIPS2_BASE + 0x40); + writel(0x0, IMX_AIPS2_BASE + 0x44); + writel(0x0, IMX_AIPS2_BASE + 0x48); + writel(0x0, IMX_AIPS2_BASE + 0x4C); + reg = readl(IMX_AIPS2_BASE + 0x50); + reg &= 0x00FFFFFF; + writel(reg, IMX_AIPS2_BASE + 0x50); + + /* MAX (Multi-Layer AHB Crossbar Switch) setup */ + + /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ +#define MAX_PARAM1 0x00302154 + writel(MAX_PARAM1, IMX_MAX_BASE + 0x000); /* for S0 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */ + writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */ + + /* SGPCR - always park on last master */ + writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */ + writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */ + writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */ + writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */ + writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */ + + /* MGPCR - restore default values */ + writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */ + writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */ + writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */ + writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */ + writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */ + writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */ + + return 0; +} + +core_initcall(f3s_core_init); + +static int f3s_get_rev(struct mc13892 *mc13892) +{ + u32 rev; + int err; + + err = mc13892_reg_read(mc13892, MC13892_REG_IDENTIFICATION, &rev); + if (err) + return err; + + dev_info(&mc13892->client->dev, "revision: 0x%x\n", rev); + if (rev == 0x00ffffff) + return -ENODEV; + + return ((rev >> 6) & 0x7) ? MX35PDK_BOARD_REV_2 : MX35PDK_BOARD_REV_1; +} + +static int f3s_pmic_init_v2(struct mc13892 *mc13892) +{ + int err = 0; + + /* COMPARE pin (GPIO1_5) as output and set high */ + gpio_direction_output( 32*0 + 5 , 1); + + err |= mc13892_set_bits(mc13892, MC13892_REG_SETTING_0, 0x03, 0x03); + err |= mc13892_set_bits(mc13892, MC13892_REG_MODE_0, 0x01, 0x01); + if (err) + dev_err(&mc13892->client->dev, + "Init sequence failed, the system might not be working!\n"); + + return err; +} + +static int f3s_pmic_init_all(struct mc9sdz60 *mc9sdz60) +{ + int err = 0; + + err |= mc9sdz60_set_bits(mc9sdz60, MC9SDZ60_REG_GPIO_1, 0x04, 0x04); + + err |= mc9sdz60_set_bits(mc9sdz60, MC9SDZ60_REG_RESET_1, 0x80, 0x00); + mdelay(200); + err |= mc9sdz60_set_bits(mc9sdz60, MC9SDZ60_REG_RESET_1, 0x80, 0x80); + + if (err) + dev_err(&mc9sdz60->client->dev, + "Init sequence failed, the system might not be working!\n"); + + return err; +} + +static int f3s_pmic_init(void) +{ + struct mc13892 *mc13892; + struct mc9sdz60 *mc9sdz60; + int rev; + + mc13892 = mc13892_get(); + if (!mc13892) { + printf("FAILED to get mc13892 handle!\n"); + return 0; + } + + rev = f3s_get_rev(mc13892); + switch (rev) { + case MX35PDK_BOARD_REV_1: + break; + case MX35PDK_BOARD_REV_2: + f3s_pmic_init_v2(mc13892); + break; + default: + printf("FAILED to identify board revision!\n"); + return 0; + } + + set_board_rev(rev); + printf("i.MX35 PDK CPU board version %d.\n", rev ); + + mc9sdz60 = mc9sdz60_get(); + if (!mc9sdz60) { + printf("FAILED to get mc9sdz60 handle!\n"); + return 0; + } + + f3s_pmic_init_all(mc9sdz60); + + armlinux_set_revision(imx35_3ds_system_rev); + + return 0; +} + +late_initcall(f3s_pmic_init); + +#ifdef CONFIG_NAND_IMX_BOOT +void __bare_init nand_boot(void) +{ + /* + * The driver is able to detect NAND's pagesize by CPU internal + * fuses or external pull ups. But not the blocksize... + */ + imx_nand_load_image((void *)TEXT_BASE, 256 * 1024); +} +#endif |