1 files changed, 0 insertions, 352 deletions
diff --git a/arch/arm/boards/friendlyarm-mini2440/mini2440.c b/arch/arm/boards/friendlyarm-mini2440/mini2440.c
deleted file mode 100644
index 7f59cb99b2..0000000000
--- a/arch/arm/boards/friendlyarm-mini2440/mini2440.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * Copyright (C) 2010 Marek Belisko <marek.belisko@open-nandra.com>
- *
- * Based on a9m2440.c board init by Juergen Beisert, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#include <common.h>
-#include <driver.h>
-#include <init.h>
-#include <generated/mach-types.h>
-#include <partition.h>
-#include <platform_data/eth-dm9000.h>
-#include <nand.h>
-#include <mci.h>
-#include <fb.h>
-#include <asm/armlinux.h>
-#include <asm/sections.h>
-#include <io.h>
-#include <gpio.h>
-#include <mach/bbu.h>
-#include <mach/iomux.h>
-#include <mach/s3c-iomap.h>
-#include <mach/devices-s3c24xx.h>
-#include <mach/s3c24xx-nand.h>
-#include <mach/s3c-generic.h>
-#include <mach/s3c-mci.h>
-#include <mach/s3c24xx-fb.h>
-#include <mach/s3c-busctl.h>
-#include <mach/s3c24xx-gpio.h>
-
-static struct s3c24x0_nand_platform_data nand_info = {
-	.nand_timing = CALC_NFCONF_TIMING(MINI2440_TACLS, MINI2440_TWRPH0,
-							MINI2440_TWRPH1),
-	.flash_bbt = 1,	/* same as the kernel */
-};
-
-/*
- * dm9000 network controller onboard
- * Connected to CS line 4 and interrupt line EINT7,
- * data width is 16 bit
- * Area 1: Offset 0x300...0x303
- * Area 2: Offset 0x304...0x307
- */
-static struct dm9000_platform_data dm9000_data = {
-	.srom     = 1,
-};
-
-static struct s3c_mci_platform_data mci_data = {
-	.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED,
-	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_detect = 232,	/* GPG8_GPIO */
-	.detect_invert = 0,
-};
-
-static struct fb_videomode s3c24x0_fb_modes[] = {
-#ifdef CONFIG_MINI2440_VIDEO_N35
-	{
-		.name		= "N35",
-		.refresh	= 60,
-		.xres		= 240,
-		.left_margin	= 21,
-		.right_margin	= 38,
-		.hsync_len	= 6,
-		.yres		= 320,
-		.upper_margin	= 4,
-		.lower_margin	= 4,
-		.vsync_len	= 2,
-		.pixclock	= 115913,
-		.sync		= FB_SYNC_USE_PWREN,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-#endif
-#ifdef CONFIG_MINI2440_VIDEO_A70
-	{
-		.name		= "A70",
-		.refresh	= 50,
-		.xres		= 800,
-		.left_margin	= 40,
-		.right_margin	= 40,
-		.hsync_len	= 48,
-		.yres		= 480,
-		.upper_margin	= 29,
-		.lower_margin	= 3,
-		.vsync_len	= 3,
-		.pixclock	= 41848,
-		.sync		= FB_SYNC_USE_PWREN | FB_SYNC_DE_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-#endif
-#ifdef CONFIG_MINI2440_VIDEO_SVGA
-	{
-		.name		= "SVGA",
-		.refresh	= 24,
-		.xres		= 1024,
-		.left_margin	= 1,
-		.right_margin	= 2,
-		.hsync_len	= 2,
-		.yres		= 768,
-		.upper_margin	= 200,
-		.lower_margin	= 16,
-		.vsync_len	= 16,
-		.pixclock	= 40492,
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | FB_SYNC_DE_HIGH_ACT
-                                  /* | FB_SYNC_SWAP_HW */ /* FIXME maybe */ ,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-#endif
-#ifdef CONFIG_MINI2440_VIDEO_W35
-	{
-		.name		= "W35",
-		.refresh	= 60,
-		.xres		= 320,
-		.left_margin	= 68,
-		.right_margin	= 66,
-		.hsync_len	= 4,
-		.yres		= 240,
-		.upper_margin	= 4,
-		.lower_margin	= 4,
-		.vsync_len	= 9,
-		.pixclock	= 115913,
-		.sync		= FB_SYNC_USE_PWREN | FB_SYNC_CLK_INVERT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-#endif
-};
-
-static struct s3c_fb_platform_data s3c24x0_fb_data = {
-	.mode_list		= s3c24x0_fb_modes,
-	.mode_cnt		= sizeof(s3c24x0_fb_modes) / sizeof(struct fb_videomode),
-	.bits_per_pixel		= 16,
-	.passive_display	= 0,
-};
-
-static const unsigned pin_usage[] = {
-	/* address bus, used by NOR, SDRAM */
-	GPA1_ADDR16,
-	GPA2_ADDR17,
-	GPA3_ADDR18,
-	GPA4_ADDR19,
-	GPA5_ADDR20,
-	GPA6_ADDR21,
-	GPA7_ADDR22,
-
-	GPA8_ADDR23_GPIO | GPIO_IN,
-	GPA9_ADDR24,	/* BA0 */
-	GPA10_ADDR25,	/* BA1 */
-	GPA11_ADDR26_GPIO | GPIO_IN,	/* not connected */
-
-	/* DM9000 requirements */
-	GPA15_NGCS4,
-	GPF7_EINT7,
-
-	/* de-activate the speaker */
-	GPB0_GPIO | GPIO_OUT | GPIO_VAL(0),
-
-	/* SD socket */
-	GPE5_SDCLK,
-	GPE6_SDCMD,
-	GPE7_SDDAT0,
-	GPE8_SDDAT1,
-	GPE9_SDDAT2,
-	GPE10_SDDAT3,
-	GPG8_GPIO | GPIO_IN,	/* change detection */
-	GPH8_GPIO | GPIO_IN,	/* write protection sense */
-
-	/* NAND requirements */
-	GPA17_CLE,
-	GPA18_ALE,
-	GPA19_NFWE,
-	GPA20_NFRE,
-	GPA21_NRSTOUT,
-	GPA22_NFCE,
-
-	/* Video out */
-	GPC0_LEND,
-	GPC1_VCLK,
-	GPC2_VLINE,
-	GPC3_VFRAME,
-	GPC4_VM,
-	GPC5_LPCOE,
-	GPC6_LPCREV,
-	GPC7_LPCREVB,
-	GPG4_LCD_PWREN,
-
-	GPC8_VD0,
-	GPC9_VD1,
-	GPC10_VD2,
-	GPC11_VD3,
-	GPC12_VD4,
-	GPC13_VD5,
-	GPC14_VD6,
-	GPC15_VD7,
-	GPD0_VD8,
-	GPD1_VD9,
-	GPD2_VD10,
-	GPD3_VD11,
-	GPD4_VD12,
-	GPD5_VD13,
-	GPD6_VD14,
-	GPD7_VD15,
-	GPD8_VD16,
-	GPD9_VD17,
-	GPD10_VD18,
-	GPD11_VD19,
-	GPD12_VD20,
-	GPD13_VD21,
-	GPD14_VD22,
-	GPD15_VD23,
-
-	/* K6 or CON12, pin 6, external pull up  */
-	GPG11_EINT19 | GPIO_IN,
-	/* K5 or CON12, pin 5*/
-	GPG7_EINT15 | GPIO_IN,
-	/* K4 or CON12, pin 4 */
-	GPG6_EINT14 | GPIO_IN,
-	/* K3 or CON12, pin 3 */
-	GPG5_EINT13 | GPIO_IN,
-	/* K2 or CON12, pin 2 */
-	GPG3_EINT11 | GPIO_IN,
-	/* K1 or CON12, pin 1, external pull up */
-	GPG0_EINT8 | GPIO_IN,
-
-	/* LED 1 1=off */
-	GPB5_GPIO | GPIO_OUT | GPIO_VAL(1),
-	/* LED 2 1=off */
-	GPB6_GPIO | GPIO_OUT | GPIO_VAL(1),
-	/* LED 3 1=off */
-	GPB7_GPIO | GPIO_OUT | GPIO_VAL(1),
-	/* LED 4 1=off */
-	GPB8_GPIO | GPIO_OUT | GPIO_VAL(1),
-
-	/* camera interface (ignore it) */
-	GPJ0_GPIO | GPIO_IN,
-	GPJ1_GPIO | GPIO_IN,
-	GPJ2_GPIO | GPIO_IN,
-	GPJ3_GPIO | GPIO_IN,
-	GPJ4_GPIO | GPIO_IN,
-	GPJ5_GPIO | GPIO_IN,
-	GPJ6_GPIO | GPIO_IN,
-	GPJ7_GPIO | GPIO_IN,
-	GPJ8_GPIO | GPIO_IN,
-	GPJ9_GPIO | GPIO_IN,
-	GPJ10_GPIO | GPIO_IN,
-	GPJ11_GPIO | GPIO_IN,
-	GPJ12_GPIO | GPIO_IN,
-
-	/* I2C bus */
-	GPE14_IICSCL,	/* external pull up */
-	GPE15_IICSDA,	/* external pull up */
-
-	GPA12_NGCS1,	/* CON5, pin 7 */
-	GPA13_NGCS2,	/* CON5, pin 8 */
-	GPA14_NGCS3,	/* CON5, pin 9 */
-	GPA16_NGCS5,	/* CON5, pin 10 */
-
-	/* UART2 (spare) */
-	GPH4_TXD1,
-	GPH5_RXD1,
-
-	/* UART3 (spare) */
-	GPH6_TXD2,
-	GPH7_RXD2,
-};
-
-static int mini2440_mem_init(void)
-{
-	arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c24xx_get_memory_size());
-
-	return 0;
-}
-mem_initcall(mini2440_mem_init);
-
-static int mini2440_devices_init(void)
-{
-	uint32_t reg;
-	int i;
-
-	/* ----------- configure the access to the outer space ---------- */
-	for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
-		s3c_gpio_mode(pin_usage[i]);
-
-	reg = readl(S3C_BWSCON);
-
-	/* CS#4 to access the network controller */
-	reg &= ~0x000f0000;
-	reg |=  0x000d0000;	/* 16 bit */
-	writel(0x1f4c, S3C_BANKCON4);
-
-	writel(reg, S3C_BWSCON);
-
-	/* release the reset signal to external devices */
-	reg = readl(S3C_MISCCR);
-	reg |= 0x10000;
-	writel(reg, S3C_MISCCR);
-
-	s3c24xx_add_nand(&nand_info);
-
-	add_dm9000_device(0, S3C_CS4_BASE + 0x300, S3C_CS4_BASE + 0x304,
-			  IORESOURCE_MEM_16BIT, &dm9000_data);
-#ifdef CONFIG_NAND
-	/* ----------- add some vital partitions -------- */
-	devfs_del_partition("self_raw");
-	devfs_add_partition("nand0", 0x00000, 0x40000, DEVFS_PARTITION_FIXED, "self_raw");
-	dev_add_bb_dev("self_raw", "self0");
-
-	devfs_del_partition("env_raw");
-	devfs_add_partition("nand0", 0x40000, 0x20000, DEVFS_PARTITION_FIXED, "env_raw");
-	dev_add_bb_dev("env_raw", "env0");
-
-	s3c24x0_bbu_nand_register_handler();
-#endif
-	s3c24xx_add_mci(&mci_data);
-	s3c24xx_add_fb(&s3c24x0_fb_data);
-	s3c24xx_add_ohci();
-	armlinux_set_architecture(MACH_TYPE_MINI2440);
-
-	return 0;
-}
-
-device_initcall(mini2440_devices_init);
-
-static int mini2440_console_init(void)
-{
-	/*
-	 * configure the UART1 right now, as barebox will
-	 * start to send data immediately
-	 */
-	s3c_gpio_mode(GPH0_NCTS0);
-	s3c_gpio_mode(GPH1_NRTS0);
-	s3c_gpio_mode(GPH2_TXD0);
-	s3c_gpio_mode(GPH3_RXD0);
-
-	barebox_set_model("Friendlyarm mini2440");
-	barebox_set_hostname("mini2440");
-
-	s3c24xx_add_uart1();
-	return 0;
-}
-
-console_initcall(mini2440_console_init);