diff options
Diffstat (limited to 'arch/arm/boards/karo-tx51/tx51.dox')
| -rw-r--r-- | arch/arm/boards/karo-tx51/tx51.dox | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/arch/arm/boards/karo-tx51/tx51.dox b/arch/arm/boards/karo-tx51/tx51.dox deleted file mode 100644 index 08268e0576..0000000000 --- a/arch/arm/boards/karo-tx51/tx51.dox +++ /dev/null @@ -1,50 +0,0 @@ -/** -@page tx51 KARO's TX51 CPU module - -@section tx51_cpu_card The CPU module - -http://www.karo-electronics.de/ - -This CPU card is based on a Freescale i.MX51 CPU. The card is shipped with: - -- 128 MiB synchronous dynamic RAM (DDR2 type), 200 MHz support -- 128 MiB NAND K9F1G08U0A (3.3V type) -- DS1339 RTC -- LAN8700 Phy - -@section tx51_baseboards Supported baseboards - -Supported baseboards are: -- KARO's Starterkit 5 (currently only SD1, FEC implemented but non-working) - -@section tx28_stk5_howto How to get barebox for 'KARO's Starterkit 5' - -Using the default configuration: - -@verbatim -make ARCH=arm tx51tk5_defconfig -@endverbatim - -Build the binary image: - -@verbatim -make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -@endverbatim - -@note replace the arm-linux-gnueabi with your ARM v7 cross compiler. - -@note To use the result, you also need the following resources from Freescale: -- the 'bootlets' archive -- the 'elftosb2' encryption tool -- in the case you want to start @b barebox from an attached SD card the - 'sdimage' tool from Freescale's 'uuc' archive. - -@section tx28_mlayout Memory layout when barebox is running: - -- 0x90000000 start of SDRAM -- 0x90000100 start of kernel's boot parameters - - below malloc area: stack area - - below barebox: malloc area -- 0x97f00000 start of @b barebox - -*/ |