diff options
Diffstat (limited to 'arch/arm/boards/phycard-i.MX27/pca100.c')
-rw-r--r-- | arch/arm/boards/phycard-i.MX27/pca100.c | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/arch/arm/boards/phycard-i.MX27/pca100.c b/arch/arm/boards/phycard-i.MX27/pca100.c new file mode 100644 index 0000000000..ce59960e22 --- /dev/null +++ b/arch/arm/boards/phycard-i.MX27/pca100.c @@ -0,0 +1,239 @@ + /* + * Copyright (C) 2007 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <net.h> +#include <init.h> +#include <environment.h> +#include <mach/imx-regs.h> +#include <fec.h> +#include <mach/gpio.h> +#include <asm/armlinux.h> +#include <asm/mach-types.h> +#include <partition.h> +#include <fs.h> +#include <fcntl.h> +#include <nand.h> +#include <spi/spi.h> +#include <asm/io.h> +#include <mach/imx-nand.h> +#include <mach/imx-pll.h> +#include <gpio.h> +#include <asm/mmu.h> +#include <usb/isp1504.h> +#include <mach/iomux-mx27.h> + +static struct memory_platform_data ram_pdata = { + .name = "ram0", + .flags = DEVFS_RDWR, +}; + +static struct device_d sdram_dev = { + .name = "mem", + .map_base = 0xa0000000, + .size = 128 * 1024 * 1024, + .platform_data = &ram_pdata, +}; + +static struct fec_platform_data fec_info = { + .xcv_type = MII100, + .phy_addr = 1, +}; + +static struct device_d fec_dev = { + .name = "fec_imx", + .map_base = 0x1002b000, + .platform_data = &fec_info, +}; + +struct imx_nand_platform_data nand_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct device_d nand_dev = { + .name = "imx_nand", + .map_base = 0xd8000000, + .platform_data = &nand_info, +}; + +#ifdef CONFIG_USB +static struct device_d usbh2_dev = { + .name = "ehci", + .map_base = IMX_OTG_BASE + 0x400, + .size = 0x200, +}; + +static void pca100_usbh_init(void) +{ + uint32_t temp; + + temp = readl(IMX_OTG_BASE + 0x600); + temp &= ~((3 << 21) | 1); + temp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 11) | (1 << 20); + writel(temp, IMX_OTG_BASE + 0x600); + + temp = readl(IMX_OTG_BASE + 0x584); + temp &= ~(3 << 30); + temp |= 2 << 30; + writel(temp, IMX_OTG_BASE + 0x584); + + mdelay(10); + + gpio_direction_output(GPIO_PORTB + 24, 0); + + mdelay(10); + + isp1504_set_vbus_power((void *)(IMX_OTG_BASE + 0x570), 1); +} +#endif + +#ifdef CONFIG_MMU +static void pca100_mmu_init(void) +{ + mmu_init(); + + arm_create_section(0xa0000000, 0xa0000000, 128, PMD_SECT_DEF_CACHED); + arm_create_section(0xb0000000, 0xa0000000, 128, PMD_SECT_DEF_UNCACHED); + + setup_dma_coherent(0x10000000); + +#if TEXT_BASE & (0x100000 - 1) +#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary +#else + arm_create_section(0x0, TEXT_BASE, 1, PMD_SECT_DEF_UNCACHED); +#endif + mmu_enable(); +} +#else +static void pca100_mmu_init(void) +{ +} +#endif + +static int pca100_devices_init(void) +{ + int i; + struct device_d *nand; + + unsigned int mode[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC | GPIO_PUEN, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + PD25_PF_CSPI1_RDY, + PD26_PF_CSPI1_SS2, + PD27_PF_CSPI1_SS1, + PD28_PF_CSPI1_SS0, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, + /* USB host 2 */ + PA0_PF_USBH2_CLK, + PA1_PF_USBH2_DIR, + PA2_PF_USBH2_DATA7, + PA3_PF_USBH2_NXT, + PA4_PF_USBH2_STP, + PD19_AF_USBH2_DATA4, + PD20_AF_USBH2_DATA3, + PD21_AF_USBH2_DATA6, + PD22_AF_USBH2_DATA0, + PD23_AF_USBH2_DATA2, + PD24_AF_USBH2_DATA1, + PD26_AF_USBH2_DATA5, + }; + + /* disable the usb phys */ + imx_gpio_mode((GPIO_PORTB | 23) | GPIO_GPIO | GPIO_IN); + gpio_direction_output(GPIO_PORTB + 23, 1); + imx_gpio_mode((GPIO_PORTB | 24) | GPIO_GPIO | GPIO_IN); + gpio_direction_output(GPIO_PORTB + 24, 1); + + /* initizalize gpios */ + for (i = 0; i < ARRAY_SIZE(mode); i++) + imx_gpio_mode(mode[i]); + + register_device(&nand_dev); + register_device(&sdram_dev); + register_device(&fec_dev); + + PCCR1 |= PCCR1_PERCLK2_EN; + +#ifdef CONFIG_USB + pca100_usbh_init(); + register_device(&usbh2_dev); +#endif + + nand = get_device_by_name("nand0"); + devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw"); + dev_add_bb_dev("self_raw", "self0"); + + devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw"); + dev_add_bb_dev("env_raw", "env0"); + + armlinux_add_dram(&sdram_dev); + armlinux_set_bootparams((void *)0xa0000100); + armlinux_set_architecture(2149); + + return 0; +} + +device_initcall(pca100_devices_init); + +static struct device_d pca100_serial_device = { + .name = "imx_serial", + .map_base = IMX_UART1_BASE, + .size = 4096, +}; + +static int pca100_console_init(void) +{ + pca100_mmu_init(); + register_device(&pca100_serial_device); + return 0; +} + +console_initcall(pca100_console_init); + +#ifdef CONFIG_NAND_IMX_BOOT +void __bare_init nand_boot(void) +{ + imx_nand_load_image((void *)TEXT_BASE, 256 * 1024); +} +#endif + |