diff options
Diffstat (limited to 'arch/arm/boards/phytec-phycore-imx35/lowlevel.c')
-rw-r--r-- | arch/arm/boards/phytec-phycore-imx35/lowlevel.c | 194 |
1 files changed, 0 insertions, 194 deletions
diff --git a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c b/arch/arm/boards/phytec-phycore-imx35/lowlevel.c deleted file mode 100644 index b80dafec16..0000000000 --- a/arch/arm/boards/phytec-phycore-imx35/lowlevel.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * - * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include <common.h> -#include <init.h> -#include <mach/imx35-regs.h> -#include <mach/imx-pll.h> -#include <mach/esdctl.h> -#include <asm/cache-l2x0.h> -#include <io.h> -#include <mach/imx-nand.h> -#include <asm/barebox-arm.h> -#include <asm/barebox-arm-head.h> -#include <asm/sections.h> -#include <asm-generic/memory_layout.h> -#include <asm/system.h> - -#define IMX35_CHIP_REVISION_2_1 0x11 - -#define CCM_PDR0_399 0x00011000 -#define CCM_PDR0_532 0x00001000 - -void __bare_init __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2) -{ - uint32_t r, s; - unsigned long ccm_base = MX35_CCM_BASE_ADDR; - unsigned long iomuxc_base = MX35_IOMUXC_BASE_ADDR; - unsigned long esdctl_base = MX35_ESDCTL_BASE_ADDR; - - arm_cpu_lowlevel_init(); - - arm_setup_stack(MX35_IRAM_BASE_ADDR + MX35_IRAM_SIZE); - - r = get_cr(); - r |= CR_Z; /* Flow prediction (Z) */ - r |= CR_U; /* unaligned accesses */ - r |= CR_FI; /* Low Int Latency */ - - __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(s)); - s |= 0x7; - __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1" : : "r"(s)); - - set_cr(r); - - r = 0; - __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r)); - - /* - * Branch predicition is now enabled. Flush the BTAC to ensure a valid - * starting point. Don't flush BTAC while it is disabled to avoid - * ARM1136 erratum 408023. - */ - __asm__ __volatile__("mcr p15, 0, %0, c7, c5, 6" : : "r"(r)); - - /* invalidate I cache and D cache */ - __asm__ __volatile__("mcr p15, 0, %0, c7, c7, 0" : : "r"(r)); - - /* invalidate TLBs */ - __asm__ __volatile__("mcr p15, 0, %0, c8, c7, 0" : : "r"(r)); - - /* Drain the write buffer */ - __asm__ __volatile__("mcr p15, 0, %0, c7, c10, 4" : : "r"(r)); - - /* Also setup the Peripheral Port Remap register inside the core */ - r = 0x40000015; /* start from AIPS 2GB region */ - __asm__ __volatile__("mcr p15, 0, %0, c15, c2, 4" : : "r"(r)); - - /* - * End of ARM1136 init - */ - - writel(0x003F4208, ccm_base + MX35_CCM_CCMR); - - /* Set MPLL , arm clock and ahb clock*/ - writel(MPCTL_PARAM_532, ccm_base + MX35_CCM_MPCTL); - - writel(PPCTL_PARAM_300, ccm_base + MX35_CCM_PPCTL); - - /* Check silicon revision and use 532MHz if >=2.1 */ - r = readl(MX35_IIM_BASE_ADDR + 0x24); - if (r >= IMX35_CHIP_REVISION_2_1) - writel(CCM_PDR0_532, ccm_base + MX35_CCM_PDR0); - else - writel(CCM_PDR0_399, ccm_base + MX35_CCM_PDR0); - - r = readl(ccm_base + MX35_CCM_CGR0); - r |= 0x3 << MX35_CCM_CGR0_EPIT1_SHIFT; - writel(r, ccm_base + MX35_CCM_CGR0); - - r = readl(ccm_base + MX35_CCM_CGR1); - r |= 0x3 << MX35_CCM_CGR1_FEC_SHIFT; - r |= 0x3 << MX35_CCM_CGR1_I2C1_SHIFT; - writel(r, ccm_base + MX35_CCM_CGR1); - - r = readl(MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL); - r |= 0x1000; - writel(r, MX35_L2CC_BASE_ADDR + L2X0_AUX_CTRL); - - /* Skip SDRAM initialization if we run from RAM */ - r = get_pc(); - if (r > 0x80000000 && r < 0x90000000) - goto out; - - /* Set DDR Type to SDRAM, drive strength workaround * - * 0x00000000 MDDR * - * 0x00000800 3,3V SDRAM */ - - r = 0x00000800; - writel(r, iomuxc_base + 0x794); - writel(r, iomuxc_base + 0x798); - writel(r, iomuxc_base + 0x79c); - writel(r, iomuxc_base + 0x7a0); - writel(r, iomuxc_base + 0x7a4); - - /* MDDR init, enable mDDR*/ - writel(0x00000304, esdctl_base + IMX_ESDMISC); /* was 0x00000004 */ - - /* set timing paramters */ - writel(0x0025541F, esdctl_base + IMX_ESDCFG0); - /* select Precharge-All mode */ - writel(0x92220000, esdctl_base + IMX_ESDCTL0); - /* Precharge-All */ - writel(0x12345678, MX35_CSD0_BASE_ADDR + 0x400); - - /* select Load-Mode-Register mode */ - writel(0xB8001000, esdctl_base + IMX_ESDCTL0); - /* Load reg EMR2 */ - writeb(0xda, 0x84000000); - /* Load reg EMR3 */ - writeb(0xda, 0x86000000); - /* Load reg EMR1 -- enable DLL */ - writeb(0xda, 0x82000400); - /* Load reg MR -- reset DLL */ - writeb(0xda, 0x80000333); - - /* select Precharge-All mode */ - writel(0x92220000, esdctl_base + IMX_ESDCTL0); - /* Precharge-All */ - writel(0x12345678, MX35_CSD0_BASE_ADDR + 0x400); - - /* select Manual-Refresh mode */ - writel(0xA2220000, esdctl_base + IMX_ESDCTL0); - /* Manual-Refresh 2 times */ - writel(0x87654321, MX35_CSD0_BASE_ADDR); - writel(0x87654321, MX35_CSD0_BASE_ADDR); - - /* select Load-Mode-Register mode */ - writel(0xB2220000, esdctl_base + IMX_ESDCTL0); - /* Load reg MR -- CL3, BL8, end DLL reset */ - writeb(0xda, 0x80000233); - /* Load reg EMR1 -- OCD default */ - writeb(0xda, 0x82000780); - /* Load reg EMR1 -- OCD exit */ - writeb(0xda, 0x82000400); - - /* select normal-operation mode - * DSIZ32-bit, BL8, COL10-bit, ROW13-bit - * disable PWT & PRCT - * disable Auto-Refresh */ - writel(0x82220080, esdctl_base + IMX_ESDCTL0); - - /* enable Auto-Refresh */ - writel(0x82228080, esdctl_base + IMX_ESDCTL0); - /* enable Auto-Refresh */ - writel(0x00002000, esdctl_base + IMX_ESDCTL1); - - if (IS_ENABLED(CONFIG_ARCH_IMX_EXTERNAL_BOOT_NAND)) { - /* Speed up NAND controller by adjusting the NFC divider */ - r = readl(MX35_CCM_BASE_ADDR + MX35_CCM_PDR4); - r &= ~(0xf << 28); - r |= 0x1 << 28; - writel(r, MX35_CCM_BASE_ADDR + MX35_CCM_PDR4); - - imx35_barebox_boot_nand_external(0); - } - -out: - imx35_barebox_entry(NULL); -} |