diff options
Diffstat (limited to 'arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460')
3 files changed, 115 insertions, 0 deletions
diff --git a/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/bin/init_board b/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/bin/init_board new file mode 100644 index 0000000000..d5142ee8d0 --- /dev/null +++ b/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/bin/init_board @@ -0,0 +1,23 @@ +#!/bin/sh +global displayargs +. /env/config + +if [ -z $display ]; then + echo "no display configured" + exit 0 +fi + +if [ $display = dvi ]; then + global.displayargs="omapdss.def_disp=dvi omapfb.mode=dvi:$dvi_resolution" + exit 0 +fi + +# Display a splash screen + +if [ -e /dev/fb0 ]; then + fb0.mode_name=$display + splash /dev/nand0.splash.bb + fb0.enable=1 +fi + +global.displayargs="panel_generic_dpi.name=$display" diff --git a/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/bin/nand_bootstrap b/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/bin/nand_bootstrap new file mode 100644 index 0000000000..49e38dc4f0 --- /dev/null +++ b/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/bin/nand_bootstrap @@ -0,0 +1,31 @@ +#!/bin/sh +echo "copying barebox to nand..." + +mci0.probe=1 +mkdir mnt + +mount /dev/disk0.0 /mnt +if [ $? != 0 ]; then + echo "failed to mount mmc card" + exit 1 +fi + +if [ ! -f /mnt/mlo-nand.bin ]; then + echo "mlo-nand.bin not found on mmc card" + exit 1 +fi + +if [ ! -f /mnt/barebox.bin ]; then + echo "barebox.bin not found on mmc card" +fi + +gpmc_nand0.eccmode=bch8_hw_romcode +erase /dev/nand0.xload.bb +cp /mnt/mlo-nand.bin /dev/nand0.xload.bb + +gpmc_nand0.eccmode=bch8_hw +erase /dev/nand0.barebox.bb +cp /mnt/barebox.bin /dev/nand0.barebox.bb + +echo "success" + diff --git a/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/config b/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/config new file mode 100644 index 0000000000..1a252dd9c5 --- /dev/null +++ b/arch/arm/boards/phytec-phycore-omap4460/defaultenv-phytec-phycore-omap4460/config @@ -0,0 +1,61 @@ +#!/bin/sh + +eth0.serverip= +user= + +# use 'dhcp' to do dhcp in barebox and in kernel +# use 'none' if you want to skip kernel ip autoconfiguration +ip=dhcp + +# or set your networking parameters here +#eth0.ipaddr=a.b.c.d +#eth0.netmask=a.b.c.d +#eth0.gateway=a.b.c.d +#eth0.serverip=a.b.c.d + +# can be either 'nfs', 'tftp', 'nor' or 'nand' +kernel_loc=tftp +# can be either 'net', 'nor', 'nand' or 'initrd' +rootfs_loc=net + +# can be either 'jffs2' or 'ubifs' +rootfs_type=ubifs +rootfsimage=root-${global.hostname}.$rootfs_type + +kernelimage=zImage-${global.hostname} +#kernelimage=uImage-${global.hostname} +#kernelimage=Image-${global.hostname} +#kernelimage=Image-${global.hostname}.lzo + +if [ -n $user ]; then + kernelimage="$user"-"$kernelimage" + nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}" + rootfsimage="$user"-"$rootfsimage" +else + nfsroot="$eth0.serverip:/path/to/nfs/root" +fi + +autoboot_timeout=3 + +bootargs="console=ttyO2,115200" + +nand_parts="128k(xload)ro,512k(barebox),128k(bareboxenv),4M(kernel),4M(splash),-(root)" +nand_device="omap2-nand.0" +rootfs_mtdblock_nand=5 + +#Displays +# Splashscreen-Display can be either '', 'pd050vl1', 'pm070wl4', 'pd104slf', 'g104x1' +# 'edt_etm0350G0dh6', 'edt_etm0430G0dh6', 'edt_etmv570G2dhu' or 'edt_etm0700G0dh6' +# to use dvi output in kernel set 'display=dvi' and +# dvi_resolution to '640x480-60' '800x600-60' or '1024x768-60' + +display=edt_etm0700G0dh6 +#dvi_resolution=1024x768-60 + +if [ -n ${global.displayargs} ]; then + bootargs="$bootargs ${global.displayargs}" +fi + +# set a fancy prompt (if support is compiled in) +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m " + |