diff options
Diffstat (limited to 'arch/arm/boards/scb9328/lowlevel_init.S')
-rw-r--r-- | arch/arm/boards/scb9328/lowlevel_init.S | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/arch/arm/boards/scb9328/lowlevel_init.S b/arch/arm/boards/scb9328/lowlevel_init.S new file mode 100644 index 0000000000..5b024286bb --- /dev/null +++ b/arch/arm/boards/scb9328/lowlevel_init.S @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA + * 02111-1307, USA. + * + */ + +#include <mach/imx-regs.h> + +#define CPU200 + +#ifdef CPU200 +#define CFG_MPCTL0_VAL 0x00321431 +#else +#define CFG_MPCTL0_VAL 0x040e200e +#endif + +#define BUS72 + +#ifdef BUS72 +#define CFG_SPCTL0_VAL 0x04002400 +#endif + +#ifdef BUS96 +#define CFG_SPCTL0_VAL 0x04001800 +#endif + +#ifdef BUS64 +#define CFG_SPCTL0_VAL 0x08001800 +#endif + +/* Das ist der BCLK Divider, der aus der System PLL + BCLK und HCLK erzeugt: + 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0 + 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2 + 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2 + 0x2f001003 : 192MHz/5=38,4MHz + 0x2f000003 : 64MHz/1 + Bit 22: SPLL Restart + Bit 21: MPLL Restart */ + +#ifdef BUS64 +#define CFG_CSCR_VAL 0x2f030003 +#endif + +#ifdef BUS72 +#define CFG_CSCR_VAL 0x2f030403 +#endif +/* Bit[0:3] contain PERCLK1DIV for UART 1 + 0x000b00b ->b<- -> 192MHz/12=16MHz + 0x000b00b ->8<- -> 144MHz/09=16MHz + 0x000b00b ->3<- -> 64MHz/4=16MHz */ + +#ifdef BUS96 +#define CFG_PCDR_VAL 0x000b00b5 +#endif + +#ifdef BUS64 +#define CFG_PCDR_VAL 0x000b00b3 +#endif + +#ifdef BUS72 +#define CFG_PCDR_VAL 0x000b00b8 +#endif + +#define writel(val, reg) \ + ldr r0, =reg; \ + ldr r1, =val; \ + str r1, [r0]; + +.globl board_init_lowlevel +board_init_lowlevel: + + mov r10, lr + + /* Change PERCLK1DIV to 14 ie 14+1 */ + writel(CFG_PCDR_VAL, PCDR) + + /* set MCU PLL Control Register 0 */ + writel(CFG_MPCTL0_VAL, MPCTL0) + + /* set mpll restart bit */ + ldr r0, =CSCR + ldr r1, [r0] + orr r1,r1,#(1<<21) + str r1, [r0] + + mov r2,#0x10 +1: + mov r3,#0x2000 +2: + subs r3,r3,#1 + bne 2b + + subs r2,r2,#1 + bne 1b + + /* set System PLL Control Register 0 */ + writel(CFG_SPCTL0_VAL, SPCTL0) + + /* set spll restart bit */ + ldr r0, =CSCR + ldr r1, [r0] + orr r1,r1,#(1<<22) + str r1, [r0] + + mov r2,#0x10 +1: + mov r3,#0x2000 +2: + subs r3,r3,#1 + bne 2b + + subs r2,r2,#1 + bne 1b + + writel(CFG_CSCR_VAL, CSCR) + +/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon + *this..... + * + * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15 + * register 1, this stops it using the output of the PLL and thus runs at the + * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never + * use the value set in the CM_OSC registers...regardless of what you set it + * too! Thus, although i thought i was running at 140MHz, i'm actually running + * at 40!.. + + * Slapping this into my bootloader does the trick... + + * MRC p15,0,r0,c1,c0,0 ; read core configuration register + * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode + * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration + * register + */ + MRC p15,0,r0,c1,c0,0 + ORR r0,r0,#0xC0000000 + MCR p15,0,r0,c1,c0,0 + + /* Skip SDRAM initialization if we run from RAM */ + cmp pc, #0x08000000 + bls 1f + cmp pc, #0x09000000 + bhi 1f + + mov pc,r10 + +1: + +/* SDRAM Setup */ + + writel(0x910a8200, SDCTL0) /* Precharge cmd, CAS = 2 */ + writel(0x0, 0x08200000) /* Issue Precharge all Command */ + writel(0xa10a8200, SDCTL0) /* Autorefresh cmd, CAS = 2 */ + + ldr r0, =0x08000000 + ldr r1, =0x0 /* Issue AutoRefresh Command */ + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + str r1, [r0] + + writel(0xb10a8300, SDCTL0) + writel(0x0, 0x08223000) /* CAS Latency 2, issue Mode Register Command, Burst Length = 8 */ + writel(0x810a8200, SDCTL0) /* Set to Normal Mode CAS 2 */ + + mov pc,r10 |