diff options
Diffstat (limited to 'arch/arm/boards')
27 files changed, 945 insertions, 0 deletions
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index fc883e3dea..d146d866d7 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -163,3 +163,5 @@ obj-$(CONFIG_MACH_ZII_IMX8MQ_DEV) += zii-imx8mq-dev/ obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/ obj-$(CONFIG_MACH_ZII_IMX7D_RPU2) += zii-imx7d-rpu2/ obj-$(CONFIG_MACH_WAGO_PFC_AM35XX) += wago-pfc-am35xx/ +obj-$(CONFIG_MACH_LS1046ARDB) += ls1046ardb/ +obj-$(CONFIG_MACH_TQMLS1046A) += tqmls1046a/
\ No newline at end of file diff --git a/arch/arm/boards/ls1046ardb/Makefile b/arch/arm/boards/ls1046ardb/Makefile new file mode 100644 index 0000000000..03ac4ecca3 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/Makefile @@ -0,0 +1,4 @@ +lwl-y += lowlevel.o +obj-y += board.o +lwl-y += start.o +bbenv-y += defaultenv-ls1046ardb diff --git a/arch/arm/boards/ls1046ardb/board.c b/arch/arm/boards/ls1046ardb/board.c new file mode 100644 index 0000000000..483040957e --- /dev/null +++ b/arch/arm/boards/ls1046ardb/board.c @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <init.h> +#include <envfs.h> +#include <asm/memory.h> +#include <linux/sizes.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <asm/system.h> + +static int rdb_mem_init(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a-rdb")) + return 0; + + arm_add_mem_device("ram0", 0x80000000, 0x80000000); + arm_add_mem_device("ram1", 0x880000000, 3ULL * SZ_2G); + + printf("Current EL: %d\n", current_el()); + + return 0; +} +mem_initcall(rdb_mem_init); + +static int rdb_postcore_init(void) +{ + if (!of_machine_is_compatible("fsl,ls1046a-rdb")) + return 0; + + defaultenv_append_directory(defaultenv_ls1046ardb); + + return 0; +} + +postcore_initcall(rdb_postcore_init); diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth4.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth5.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth6.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/defaultenv-ls1046ardb/nv/dev.eth7.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/ls1046ardb/lowlevel.c b/arch/arm/boards/ls1046ardb/lowlevel.c new file mode 100644 index 0000000000..6de16063a7 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/lowlevel.c @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <debug_ll.h> +#include <ddr_spd.h> +#include <platform_data/mmc-esdhc-imx.h> +#include <i2c/i2c-early.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/immap_lsch2.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <asm/syscounter.h> +#include <asm/cache.h> +#include <mach/errata.h> +#include <mach/lowlevel.h> +#include <mach/xload.h> +#include <mach/layerscape.h> + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1350, 0, 8, 6, 0x0708090B, 0x0C0D0E09,}, + {2, 1666, 0, 8, 7, 0x08090A0C, 0x0D0F100B,}, + {2, 1900, 0, 8, 7, 0x09090B0D, 0x0E10120B,}, + {2, 2300, 0, 8, 9, 0x0A0B0C10, 0x1213140E,}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1666, 0, 0x8, 0x0D, 0x0C0B0A08, 0x0A0B0C08,}, + {2, 1900, 0, 0x8, 0x0E, 0x0D0C0B09, 0x0B0C0D09,}, + {2, 2300, 0, 0xa, 0x12, 0x100F0D0C, 0x0E0F100C,}, + {1, 1666, 0, 0x8, 0x0D, 0x0C0B0A08, 0x0A0B0C08,}, + {1, 1900, 0, 0x8, 0x0E, 0x0D0C0B09, 0x0B0C0D09,}, + {1, 2300, 0, 0xa, 0x12, 0x100F0D0C, 0x0E0F100C,}, + {} +}; + +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + +static void ddr_board_options(memctl_options_t *popts, + struct dimm_params *pdimm, + struct fsl_ddr_controller *c) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + unsigned long ddr_freq; + + if (!pdimm->n_ranks) + return; + + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = c->ddr_freq / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); + + popts->data_bus_width = 0; /* 64-bit data bus */ + popts->bstopre = 0; /* enable auto precharge */ + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR4_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR4_CDR_ODT_80ohm) | + DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x61; +} + +extern char __dtb_fsl_ls1046a_rdb_start[]; + +static struct spd_eeprom spd_eeprom[] = { + { + /* filled during runtime */ + }, +}; + +static struct dimm_params dimm_params[] = { + { + /* filled during runtime */ + }, +}; + +static struct fsl_ddr_controller ddrc[] = { + { + .dimm_slots_per_ctrl = ARRAY_SIZE(dimm_params), + .spd_installed_dimms = spd_eeprom, + .dimm_params = dimm_params, + .memctl_opts.ddrtype = SDRAM_TYPE_DDR4, + .base = IOMEM(LSCH2_DDR_ADDR), + .ddr_freq = LS1046A_DDR_FREQ, + .erratum_A008511 = 1, + .erratum_A009803 = 1, + .erratum_A010165 = 1, + .erratum_A009801 = 1, + .erratum_A009942 = 1, + .chip_selects_per_ctrl = 4, + .board_options = ddr_board_options, + }, +}; + +static struct fsl_ddr_info ls1046a_info = { + .num_ctrls = ARRAY_SIZE(ddrc), + .c = ddrc, +}; + +static noinline __noreturn void ls1046ardb_r_entry(unsigned long memsize) +{ + unsigned long membase = LS1046A_DDR_SDRAM_BASE; + struct fsl_i2c *i2c; + int ret; + + if (get_pc() >= membase) { + if (memsize + membase >= 0x100000000) + memsize = 0x100000000 - membase; + + barebox_arm_entry(membase, 0x80000000 - SZ_1M * 67, + __dtb_fsl_ls1046a_rdb_start); + } + + arm_cpu_lowlevel_init(); + debug_ll_init(); + ls1046a_init_lowlevel(); + + i2c = ls1046_i2c_init(IOMEM(LSCH2_I2C1_BASE_ADDR)); + ret = spd_read_eeprom(i2c, i2c_fsl_xfer, 0x51, &spd_eeprom); + if (ret) { + pr_err("Cannot read SPD EEPROM: %d\n", ret); + goto err; + } + + memsize = fsl_ddr_sdram(&ls1046a_info); + + ls1046a_errata_post_ddr(); + + ls1046a_esdhc_start_image(memsize, 0, 0); + +err: + pr_err("Booting failed\n"); + + while (1); +} + +void ls1046ardb_entry(unsigned long r0, unsigned long r1, unsigned long r2); + +__noreturn void ls1046ardb_entry(unsigned long r0, unsigned long r1, unsigned long r2) +{ + relocate_to_current_adr(); + setup_c(); + + ls1046ardb_r_entry(r0); +} diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg new file mode 100644 index 0000000000..5478217524 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_pbi.cfg @@ -0,0 +1,22 @@ +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg new file mode 100644 index 0000000000..735d46c9f9 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_qspi_pbi.cfg @@ -0,0 +1,26 @@ +#QSPI clk +0957015c 40100000 +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff +#Change endianness +09550000 000f400c diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg new file mode 100644 index 0000000000..ccedf87e84 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_emmc.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150012 0e000000 00000000 00000000 +11335559 40000012 60040000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003000 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg new file mode 100644 index 0000000000..7b9be0ad3f --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_qspi.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150010 0e000000 00000000 00000000 +11335559 40005012 40025000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003101 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg new file mode 100644 index 0000000000..d3b152282f --- /dev/null +++ b/arch/arm/boards/ls1046ardb/ls1046ardb_rcw_sd.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c150012 0e000000 00000000 00000000 +11335559 40005012 60040000 c1000000 +00000000 00000000 00000000 00238800 +20124000 00003101 00000096 00000001 diff --git a/arch/arm/boards/ls1046ardb/start.S b/arch/arm/boards/ls1046ardb/start.S new file mode 100644 index 0000000000..466782b278 --- /dev/null +++ b/arch/arm/boards/ls1046ardb/start.S @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include <linux/linkage.h> +#include <asm/barebox-arm64.h> + +#define STACK_TOP 0x10020000 + +ENTRY_PROC(start_ls1046ardb) + mov x3, #STACK_TOP + mov sp, x3 + b ls1046ardb_entry +ENTRY_PROC_END(start_ls1046ardb) diff --git a/arch/arm/boards/tqmls1046a/Makefile b/arch/arm/boards/tqmls1046a/Makefile new file mode 100644 index 0000000000..851a5dcb3d --- /dev/null +++ b/arch/arm/boards/tqmls1046a/Makefile @@ -0,0 +1,3 @@ +lwl-y += lowlevel.o start.o +obj-y += board.o +bbenv-y += defaultenv-tqmls1046a diff --git a/arch/arm/boards/tqmls1046a/board.c b/arch/arm/boards/tqmls1046a/board.c new file mode 100644 index 0000000000..5d6d5ad62c --- /dev/null +++ b/arch/arm/boards/tqmls1046a/board.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <init.h> +#include <envfs.h> +#include <asm/memory.h> +#include <linux/sizes.h> +#include <linux/clk.h> +#include <linux/clkdev.h> + +static int tqmls1046a_mem_init(void) +{ + if (!of_machine_is_compatible("tqc,tqmls1046a")) + return 0; + + arm_add_mem_device("ram0", 0x80000000, SZ_2G); + + return 0; +} +mem_initcall(tqmls1046a_mem_init); + +static int tqmls1046a_postcore_init(void) +{ + if (!of_machine_is_compatible("tqc,tqmls1046a")) + return 0; + + defaultenv_append_directory(defaultenv_tqmls1046a); + + return 0; +} + +postcore_initcall(tqmls1046a_postcore_init); diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth4.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth5.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth6.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode new file mode 100644 index 0000000000..7a68b11da8 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/defaultenv-tqmls1046a/nv/dev.eth7.mode @@ -0,0 +1 @@ +disabled diff --git a/arch/arm/boards/tqmls1046a/lowlevel.c b/arch/arm/boards/tqmls1046a/lowlevel.c new file mode 100644 index 0000000000..044d6a418d --- /dev/null +++ b/arch/arm/boards/tqmls1046a/lowlevel.c @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <common.h> +#include <debug_ll.h> +#include <platform_data/mmc-esdhc-imx.h> +#include <soc/fsl/fsl_ddr_sdram.h> +#include <soc/fsl/immap_lsch2.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> +#include <asm/syscounter.h> +#include <asm/cache.h> +#include <mach/errata.h> +#include <mach/lowlevel.h> +#include <mach/xload.h> +#include <mach/layerscape.h> + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {1, 2100, 0, 8, 9, 0x09080806, 0x07060606,}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static void ddr_board_options(memctl_options_t *popts, + struct dimm_params *pdimm, + struct fsl_ddr_controller *c) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + unsigned long ddr_freq; + + if (!pdimm->n_ranks) + return; + + pbsp = udimms[0]; + + /* + * Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = c->ddr_freq / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); + + popts->data_bus_width = 0; /* 64-bit data bus */ + popts->bstopre = 0; /* enable auto precharge */ + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR4_CDR_ODT_60ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR4_CDR_ODT_60ohm) | + DDR_CDR2_VREF_TRAIN_EN | DDR_CDR2_VREF_RANGE_2; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x61; +} + +static struct dimm_params dimm_params[] = { + { + .n_ranks = 1, + .rank_density = 2147483648u, + .capacity = 2147483648u, + .primary_sdram_width = 64, + .ec_sdram_width = 8, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 15, + .n_col_addr = 10, + .bank_addr_bits = 2, + .bank_group_bits = 0, + .edc_config = 2, + .burst_lengths_bitmask = 0x0c, + + .tckmin_x_ps = 833, + .tckmax_ps = 1900, + .caslat_x = 0x000DFA00, // + .taa_ps = 13320, + .trcd_ps = 13320, + .trp_ps = 13320, + .tras_ps = 32000, + .trc_ps = 45320, + .trfc1_ps = 260000, + .trfc2_ps = 160000, + .trfc4_ps = 110000, + .tfaw_ps = 21000, + .trrds_ps = 3300, + .trrdl_ps = 4900, + .tccdl_ps = 5000, + .trfc_slr_ps = 3500000, + .refresh_rate_ps = 7800000, + }, +}; + +static struct fsl_ddr_controller ddrc[] = { + { + .dimm_slots_per_ctrl = ARRAY_SIZE(dimm_params), + .dimm_params = dimm_params, + .memctl_opts.ddrtype = SDRAM_TYPE_DDR4, + .base = IOMEM(LSCH2_DDR_ADDR), + .ddr_freq = LS1046A_DDR_FREQ, + .erratum_A008511 = 1, + .erratum_A009803 = 1, + .erratum_A010165 = 1, + .erratum_A009801 = 1, + .erratum_A009942 = 1, + .chip_selects_per_ctrl = 4, + .board_options = ddr_board_options, + }, +}; + +static struct fsl_ddr_info ls1046a_info = { + .num_ctrls = ARRAY_SIZE(ddrc), + .c = ddrc, +}; + +extern char __dtb_fsl_tqmls1046a_mbls10xxa_start[]; + +static noinline __noreturn void tqmls1046a_r_entry(unsigned long memsize) +{ + unsigned long membase = LS1046A_DDR_SDRAM_BASE; + + if (get_pc() >= membase) { + if (memsize + membase >= 0x100000000) + memsize = 0x100000000 - membase; + + barebox_arm_entry(membase, 0x80000000, + __dtb_fsl_tqmls1046a_mbls10xxa_start); + } + + arm_cpu_lowlevel_init(); + debug_ll_init(); + ls1046a_init_lowlevel(); + + memsize = fsl_ddr_sdram(&ls1046a_info); + + ls1046a_errata_post_ddr(); + + ls1046a_esdhc_start_image(memsize, 0, 0); + + pr_err("Booting failed\n"); + + while (1); +} + +void tqmls1046a_entry(unsigned long r0, unsigned long r1, unsigned long r2); + +__noreturn void tqmls1046a_entry(unsigned long r0, unsigned long r1, unsigned long r2) +{ + relocate_to_current_adr(); + setup_c(); + + tqmls1046a_r_entry(r0); +} diff --git a/arch/arm/boards/tqmls1046a/start.S b/arch/arm/boards/tqmls1046a/start.S new file mode 100644 index 0000000000..12b785af54 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/start.S @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include <linux/linkage.h> +#include <asm/barebox-arm64.h> + +#define STACK_TOP 0x10020000 + +ENTRY_PROC(start_tqmls1046a) + mov x3, #STACK_TOP + mov sp, x3 + b tqmls1046a_entry +ENTRY_PROC_END(start_tqmls1046a) + diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg new file mode 100644 index 0000000000..32865ca2d0 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_qspi.cfg @@ -0,0 +1,33 @@ +#Configure QSPI clock +0957015c 40100000 +#Configure Scratch register +09570600 00000000 +09570604 40010000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009c +0957041c 0000009c +09570420 0000009c +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link (errata A-010477) +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#PEX gen3 equalization preset values (errata A-008851) +894008bc 01000000 +89400154 47474747 +89400158 47474747 +894008bc 00000000 +895008bc 01000000 +89500154 47474747 +89500158 47474747 +895008bc 00000000 +896008bc 01000000 +89600154 47474747 +89600158 47474747 +896008bc 00000000 diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg new file mode 100644 index 0000000000..7ac1398123 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_pbi_sd.cfg @@ -0,0 +1,35 @@ +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009c +0957041c 0000009c +09570420 0000009c +#Serdes SATA +09eb1300 80104e20 +09eb08dc 00502880 +#PEX gen3 link (errata A-010477) +09570158 00000300 +89400890 01048000 +89500890 01048000 +89600890 01048000 +#PEX gen3 equalization preset values (errata A-008851) +894008bc 01000000 +89400154 47474747 +89400158 47474747 +894008bc 00000000 +895008bc 01000000 +89500154 47474747 +89500158 47474747 +895008bc 00000000 +896008bc 01000000 +89600154 47474747 +89600158 47474747 +896008bc 00000000 +#Alt base register +09570158 00001000 +#flush PBI data +096100c0 000fffff diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg new file mode 100644 index 0000000000..6c72d001c3 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_emmc_3333_5559.cfg @@ -0,0 +1,84 @@ +# RCW values +# 0: 1 - SYS_PLL_CFG : 0 [0x0 / 0b00] +# 2: 6 - SYS_PLL_RAT : 6 [0x6 / 0b00110] +# 8: 9 - MEM_PLL_CFG : 0 [0x0 / 0b00] +# 10: 15 - MEM_PLL_RAT : 20 [0x14 / 0b010100] +# 24: 25 - CGA_PLL1_CFG : 0 [0x0 / 0b00] +# 26: 31 - CGA_PLL1_RAT : 16 [0x10 / 0b010000] +# 32: 33 - CGA_PLL2_CFG : 0 [0x0 / 0b00] +# 34: 39 - CGA_PLL2_RAT : 14 [0xe / 0b001110] +# 96: 99 - C1_PLL_SEL : 0 [0x0 / 0b0000] +# 128:143 - SRDS_PRTCL_S1 : 13107 [0x3333 / 0b0011001100110011] +# 144:159 - SRDS_PRTCL_S2 : 21849 [0x5559 / 0b0101010101011001] +# 160:161 - SRDS_PLL_REF_CLK_SEL_S1 : 3 [0x3 / 0b11] +# 162:163 - SRDS_PLL_REF_CLK_SEL_S2 : 3 [0x3 / 0b11] +# 168:169 - SRDS_PLL_PD_S1 : 0 [0x0 / 0b00] +# 170:171 - SRDS_PLL_PD_S2 : 0 [0x0 / 0b00] +# 176:177 - SRDS_DIV_PEX_S1 : 1 [0x1 / 0b01] +# 178:179 - SRDS_DIV_PEX_S2 : 1 [0x1 / 0b01] +# 186:187 - DDR_REFCLK_SEL : 0 [0x0 / 0b00] +# 188:188 - SRDS_REFCLK_SEL_S1 : 0 [0x0 / 0b0] +# 189:189 - SRDS_REFCLK_SEL_S2 : 0 [0x0 / 0b0] +# 190:191 - DDR_FDBK_MULT : 2 [0x2 / 0b10] +# 192:195 - PBI_SRC : 6 [0x6 / 0b0110] +# 201:201 - BOOT_HO : 0 [0x0 / 0b0] +# 202:202 - SB_EN : 0 [0x0 / 0b0] +# 203:211 - IFC_MODE : 64 [0x40 / 0b001000000] +# 224:226 - HWA_CGA_M1_CLK_SEL : 6 [0x6 / 0b110] +# 230:231 - DRAM_LAT : 1 [0x1 / 0b01] +# 232:232 - DDR_RATE : 0 [0x0 / 0b0] +# 234:234 - DDR_RSV0 : 0 [0x0 / 0b0] +# 242:242 - SYS_PLL_SPD : 0 [0x0 / 0b0] +# 243:243 - MEM_PLL_SPD : 0 [0x0 / 0b0] +# 244:244 - CGA_PLL1_SPD : 0 [0x0 / 0b0] +# 245:245 - CGA_PLL2_SPD : 0 [0x0 / 0b0] +# 264:266 - HOST_AGT_PEX : 0 [0x0 / 0b000] +# 288:295 - GP_INFO1 : 0 [0x00 / 0b00000000] +# 299:319 - GP_INFO2 : 0 [0x00000 / 0b000000000000000000000] +# 354:356 - UART_EXT : 0 [0x0 / 0b000] +# 357:359 - IRQ_EXT : 0 [0x0 / 0b000] +# 360:362 - SPI_EXT : 0 [0x0 / 0b000] +# 363:365 - SDHC_EXT : 0 [0x0 / 0b000] +# 366:368 - UART_BASE : 5 [0x5 / 0b101] +# 369:369 - ASLEEP : 0 [0x0 / 0b0] +# 370:370 - RTC : 0 [0x0 / 0b0] +# 371:371 - SDHC_BASE : 0 [0x0 / 0b0] +# 372:372 - IRQ_OUT : 1 [0x1 / 0b1] +# 373:381 - IRQ_BASE : 0 [0x00 / 0b000000000] +# 382:383 - SPI_BASE : 0 [0x0 / 0b00] +# 384:386 - IFC_GRP_A_EXT : 1 [0x1 / 0b001] +# 393:395 - IFC_GRP_D_EXT : 0 [0x0 / 0b000] +# 396:398 - IFC_GRP_E1_EXT : 0 [0x0 / 0b000] +# 399:401 - IFC_GRP_F_EXT : 1 [0x1 / 0b001] +# 405:405 - IFC_GRP_E1_BASE : 0 [0x0 / 0b0] +# 407:407 - IFC_GRP_D_BASE : 0 [0x0 / 0b0] +# 412:413 - IFC_GRP_A_BASE : 0 [0x0 / 0b00] +# 415:415 - IFC_A_22_24 : 0 [0x0 / 0b0] +# 416:418 - EC1 : 0 [0x0 / 0b000] +# 419:421 - EC2 : 0 [0x0 / 0b000] +# 422:423 - LVDD_VSEL : 1 [0x1 / 0b01] +# 424:424 - I2C_IPGCLK_SEL : 0 [0x0 / 0b0] +# 425:425 - EM1 : 0 [0x0 / 0b0] +# 426:426 - EM2 : 0 [0x0 / 0b0] +# 427:427 - EMI2_DMODE : 1 [0x1 / 0b1] +# 428:428 - EMI2_CMODE : 0 [0x0 / 0b0] +# 429:429 - USB_DRVVBUS : 0 [0x0 / 0b0] +# 430:430 - USB_PWRFAULT : 0 [0x0 / 0b0] +# 433:434 - TVDD_VSEL : 1 [0x1 / 0b01] +# 435:436 - DVDD_VSEL : 2 [0x2 / 0b10] +# 438:438 - EMI1_DMODE : 1 [0x1 / 0b1] +# 439:440 - EVDD_VSEL : 0 [0x0 / 0b00] +# 441:443 - IIC2_BASE : 0 [0x0 / 0b000] +# 444:444 - EMI1_CMODE : 0 [0x0 / 0b0] +# 445:447 - IIC2_EXT : 2 [0x2 / 0b010] +# 472:481 - SYSCLK_FREQ : 600 [0x258 / 0b1001011000] +# 509:511 - HWA_CGA_M2_CLK_SEL : 1 [0x1 / 0b001] + + +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c140010 0e000000 00000000 00000000 +33335559 f0005002 60040000 c1000000 +00000000 00000000 00000000 00028800 +20004000 01103202 00000096 00000001 diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg new file mode 100644 index 0000000000..395c75c7d0 --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_qspi_3333_5559.cfg @@ -0,0 +1,84 @@ +# RCW values +# 0: 1 - SYS_PLL_CFG : 0 [0x0 / 0b00] +# 2: 6 - SYS_PLL_RAT : 6 [0x6 / 0b00110] +# 8: 9 - MEM_PLL_CFG : 0 [0x0 / 0b00] +# 10: 15 - MEM_PLL_RAT : 20 [0x14 / 0b010100] +# 24: 25 - CGA_PLL1_CFG : 0 [0x0 / 0b00] +# 26: 31 - CGA_PLL1_RAT : 16 [0x10 / 0b010000] +# 32: 33 - CGA_PLL2_CFG : 0 [0x0 / 0b00] +# 34: 39 - CGA_PLL2_RAT : 14 [0xe / 0b001110] +# 96: 99 - C1_PLL_SEL : 0 [0x0 / 0b0000] +# 128:143 - SRDS_PRTCL_S1 : 13107 [0x3333 / 0b0011001100110011] +# 144:159 - SRDS_PRTCL_S2 : 21849 [0x5559 / 0b0101010101011001] +# 160:161 - SRDS_PLL_REF_CLK_SEL_S1 : 3 [0x3 / 0b11] +# 162:163 - SRDS_PLL_REF_CLK_SEL_S2 : 3 [0x3 / 0b11] +# 168:169 - SRDS_PLL_PD_S1 : 0 [0x0 / 0b00] +# 170:171 - SRDS_PLL_PD_S2 : 0 [0x0 / 0b00] +# 176:177 - SRDS_DIV_PEX_S1 : 1 [0x1 / 0b01] +# 178:179 - SRDS_DIV_PEX_S2 : 1 [0x1 / 0b01] +# 186:187 - DDR_REFCLK_SEL : 0 [0x0 / 0b00] +# 188:188 - SRDS_REFCLK_SEL_S1 : 0 [0x0 / 0b0] +# 189:189 - SRDS_REFCLK_SEL_S2 : 0 [0x0 / 0b0] +# 190:191 - DDR_FDBK_MULT : 2 [0x2 / 0b10] +# 192:195 - PBI_SRC : 4 [0x4 / 0b0100] +# 201:201 - BOOT_HO : 0 [0x0 / 0b0] +# 202:202 - SB_EN : 0 [0x0 / 0b0] +# 203:211 - IFC_MODE : 37 [0x25 / 0b000100101] +# 224:226 - HWA_CGA_M1_CLK_SEL : 6 [0x6 / 0b110] +# 230:231 - DRAM_LAT : 1 [0x1 / 0b01] +# 232:232 - DDR_RATE : 0 [0x0 / 0b0] +# 234:234 - DDR_RSV0 : 0 [0x0 / 0b0] +# 242:242 - SYS_PLL_SPD : 0 [0x0 / 0b0] +# 243:243 - MEM_PLL_SPD : 0 [0x0 / 0b0] +# 244:244 - CGA_PLL1_SPD : 0 [0x0 / 0b0] +# 245:245 - CGA_PLL2_SPD : 0 [0x0 / 0b0] +# 264:266 - HOST_AGT_PEX : 0 [0x0 / 0b000] +# 288:295 - GP_INFO1 : 0 [0x00 / 0b00000000] +# 299:319 - GP_INFO2 : 0 [0x00000 / 0b000000000000000000000] +# 354:356 - UART_EXT : 0 [0x0 / 0b000] +# 357:359 - IRQ_EXT : 0 [0x0 / 0b000] +# 360:362 - SPI_EXT : 0 [0x0 / 0b000] +# 363:365 - SDHC_EXT : 0 [0x0 / 0b000] +# 366:368 - UART_BASE : 5 [0x5 / 0b101] +# 369:369 - ASLEEP : 0 [0x0 / 0b0] +# 370:370 - RTC : 0 [0x0 / 0b0] +# 371:371 - SDHC_BASE : 0 [0x0 / 0b0] +# 372:372 - IRQ_OUT : 1 [0x1 / 0b1] +# 373:381 - IRQ_BASE : 0 [0x00 / 0b000000000] +# 382:383 - SPI_BASE : 0 [0x0 / 0b00] +# 384:386 - IFC_GRP_A_EXT : 1 [0x1 / 0b001] +# 393:395 - IFC_GRP_D_EXT : 0 [0x0 / 0b000] +# 396:398 - IFC_GRP_E1_EXT : 0 [0x0 / 0b000] +# 399:401 - IFC_GRP_F_EXT : 1 [0x1 / 0b001] +# 405:405 - IFC_GRP_E1_BASE : 0 [0x0 / 0b0] +# 407:407 - IFC_GRP_D_BASE : 0 [0x0 / 0b0] +# 412:413 - IFC_GRP_A_BASE : 0 [0x0 / 0b00] +# 415:415 - IFC_A_22_24 : 0 [0x0 / 0b0] +# 416:418 - EC1 : 0 [0x0 / 0b000] +# 419:421 - EC2 : 0 [0x0 / 0b000] +# 422:423 - LVDD_VSEL : 1 [0x1 / 0b01] +# 424:424 - I2C_IPGCLK_SEL : 0 [0x0 / 0b0] +# 425:425 - EM1 : 0 [0x0 / 0b0] +# 426:426 - EM2 : 0 [0x0 / 0b0] +# 427:427 - EMI2_DMODE : 1 [0x1 / 0b1] +# 428:428 - EMI2_CMODE : 0 [0x0 / 0b0] +# 429:429 - USB_DRVVBUS : 0 [0x0 / 0b0] +# 430:430 - USB_PWRFAULT : 0 [0x0 / 0b0] +# 433:434 - TVDD_VSEL : 1 [0x1 / 0b01] +# 435:436 - DVDD_VSEL : 2 [0x2 / 0b10] +# 438:438 - EMI1_DMODE : 1 [0x1 / 0b1] +# 439:440 - EVDD_VSEL : 0 [0x0 / 0b00] +# 441:443 - IIC2_BASE : 0 [0x0 / 0b000] +# 444:444 - EMI1_CMODE : 0 [0x0 / 0b0] +# 445:447 - IIC2_EXT : 2 [0x2 / 0b010] +# 472:481 - SYSCLK_FREQ : 600 [0x258 / 0b1001011000] +# 509:511 - HWA_CGA_M2_CLK_SEL : 1 [0x1 / 0b001] + + +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c140010 0e000000 00000000 00000000 +33335559 f0005002 40025000 c1000000 +00000000 00000000 00000000 00028800 +20004000 01103202 00000096 00000001 diff --git a/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg new file mode 100644 index 0000000000..4ef6d576ed --- /dev/null +++ b/arch/arm/boards/tqmls1046a/tqmls1046a_rcw_sd_3333_5559.cfg @@ -0,0 +1,84 @@ +# RCW values +# 0: 1 - SYS_PLL_CFG : 0 [0x0 / 0b00] +# 2: 6 - SYS_PLL_RAT : 6 [0x6 / 0b00110] +# 8: 9 - MEM_PLL_CFG : 0 [0x0 / 0b00] +# 10: 15 - MEM_PLL_RAT : 20 [0x14 / 0b010100] +# 24: 25 - CGA_PLL1_CFG : 0 [0x0 / 0b00] +# 26: 31 - CGA_PLL1_RAT : 16 [0x10 / 0b010000] +# 32: 33 - CGA_PLL2_CFG : 0 [0x0 / 0b00] +# 34: 39 - CGA_PLL2_RAT : 14 [0xe / 0b001110] +# 96: 99 - C1_PLL_SEL : 0 [0x0 / 0b0000] +# 128:143 - SRDS_PRTCL_S1 : 13107 [0x3333 / 0b0011001100110011] +# 144:159 - SRDS_PRTCL_S2 : 21849 [0x5559 / 0b0101010101011001] +# 160:161 - SRDS_PLL_REF_CLK_SEL_S1 : 3 [0x3 / 0b11] +# 162:163 - SRDS_PLL_REF_CLK_SEL_S2 : 3 [0x3 / 0b11] +# 168:169 - SRDS_PLL_PD_S1 : 0 [0x0 / 0b00] +# 170:171 - SRDS_PLL_PD_S2 : 0 [0x0 / 0b00] +# 176:177 - SRDS_DIV_PEX_S1 : 1 [0x1 / 0b01] +# 178:179 - SRDS_DIV_PEX_S2 : 1 [0x1 / 0b01] +# 186:187 - DDR_REFCLK_SEL : 0 [0x0 / 0b00] +# 188:188 - SRDS_REFCLK_SEL_S1 : 0 [0x0 / 0b0] +# 189:189 - SRDS_REFCLK_SEL_S2 : 0 [0x0 / 0b0] +# 190:191 - DDR_FDBK_MULT : 2 [0x2 / 0b10] +# 192:195 - PBI_SRC : 6 [0x6 / 0b0110] +# 201:201 - BOOT_HO : 0 [0x0 / 0b0] +# 202:202 - SB_EN : 0 [0x0 / 0b0] +# 203:211 - IFC_MODE : 64 [0x40 / 0b001000000] +# 224:226 - HWA_CGA_M1_CLK_SEL : 6 [0x6 / 0b110] +# 230:231 - DRAM_LAT : 1 [0x1 / 0b01] +# 232:232 - DDR_RATE : 0 [0x0 / 0b0] +# 234:234 - DDR_RSV0 : 0 [0x0 / 0b0] +# 242:242 - SYS_PLL_SPD : 0 [0x0 / 0b0] +# 243:243 - MEM_PLL_SPD : 0 [0x0 / 0b0] +# 244:244 - CGA_PLL1_SPD : 0 [0x0 / 0b0] +# 245:245 - CGA_PLL2_SPD : 0 [0x0 / 0b0] +# 264:266 - HOST_AGT_PEX : 0 [0x0 / 0b000] +# 288:295 - GP_INFO1 : 0 [0x00 / 0b00000000] +# 299:319 - GP_INFO2 : 0 [0x00000 / 0b000000000000000000000] +# 354:356 - UART_EXT : 0 [0x0 / 0b000] +# 357:359 - IRQ_EXT : 0 [0x0 / 0b000] +# 360:362 - SPI_EXT : 0 [0x0 / 0b000] +# 363:365 - SDHC_EXT : 0 [0x0 / 0b000] +# 366:368 - UART_BASE : 5 [0x5 / 0b101] +# 369:369 - ASLEEP : 0 [0x0 / 0b0] +# 370:370 - RTC : 0 [0x0 / 0b0] +# 371:371 - SDHC_BASE : 0 [0x0 / 0b0] +# 372:372 - IRQ_OUT : 1 [0x1 / 0b1] +# 373:381 - IRQ_BASE : 0 [0x00 / 0b000000000] +# 382:383 - SPI_BASE : 0 [0x0 / 0b00] +# 384:386 - IFC_GRP_A_EXT : 1 [0x1 / 0b001] +# 393:395 - IFC_GRP_D_EXT : 0 [0x0 / 0b000] +# 396:398 - IFC_GRP_E1_EXT : 0 [0x0 / 0b000] +# 399:401 - IFC_GRP_F_EXT : 1 [0x1 / 0b001] +# 405:405 - IFC_GRP_E1_BASE : 0 [0x0 / 0b0] +# 407:407 - IFC_GRP_D_BASE : 0 [0x0 / 0b0] +# 412:413 - IFC_GRP_A_BASE : 0 [0x0 / 0b00] +# 415:415 - IFC_A_22_24 : 0 [0x0 / 0b0] +# 416:418 - EC1 : 0 [0x0 / 0b000] +# 419:421 - EC2 : 0 [0x0 / 0b000] +# 422:423 - LVDD_VSEL : 1 [0x1 / 0b01] +# 424:424 - I2C_IPGCLK_SEL : 0 [0x0 / 0b0] +# 425:425 - EM1 : 0 [0x0 / 0b0] +# 426:426 - EM2 : 0 [0x0 / 0b0] +# 427:427 - EMI2_DMODE : 1 [0x1 / 0b1] +# 428:428 - EMI2_CMODE : 0 [0x0 / 0b0] +# 429:429 - USB_DRVVBUS : 0 [0x0 / 0b0] +# 430:430 - USB_PWRFAULT : 0 [0x0 / 0b0] +# 433:434 - TVDD_VSEL : 1 [0x1 / 0b01] +# 435:436 - DVDD_VSEL : 2 [0x2 / 0b10] +# 438:438 - EMI1_DMODE : 1 [0x1 / 0b1] +# 439:440 - EVDD_VSEL : 2 [0x2 / 0b10] +# 441:443 - IIC2_BASE : 0 [0x0 / 0b000] +# 444:444 - EMI1_CMODE : 0 [0x0 / 0b0] +# 445:447 - IIC2_EXT : 1 [0x1 / 0b001] +# 472:481 - SYSCLK_FREQ : 600 [0x258 / 0b1001011000] +# 509:511 - HWA_CGA_M2_CLK_SEL : 1 [0x1 / 0b001] + + +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +0c140010 0e000000 00000000 00000000 +33335559 f0005002 60040000 c1000000 +00000000 00000000 00000000 00028800 +20004000 01103301 00000096 00000001 |