diff options
Diffstat (limited to 'arch/arm/dts/imx53-guf-vincell-lt.dts')
| -rw-r--r-- | arch/arm/dts/imx53-guf-vincell-lt.dts | 679 |
1 files changed, 679 insertions, 0 deletions
diff --git a/arch/arm/dts/imx53-guf-vincell-lt.dts b/arch/arm/dts/imx53-guf-vincell-lt.dts new file mode 100644 index 0000000000..0a9bcb0f69 --- /dev/null +++ b/arch/arm/dts/imx53-guf-vincell-lt.dts @@ -0,0 +1,679 @@ +/* + * Copyright 2012 Pengutronix + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx53.dtsi" +#include <arm/imx53.dtsi> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Garz & Fricke VINCELL LT"; + compatible = "guf,imx53-vincell-lt", "fsl,imx53"; + + chosen { + linux,stdout-path = &uart2; + + environment { + compatible = "barebox,environment"; + device-path = &bareboxenv; + }; + }; + + memory { + reg = <0x70000000 0x20000000>; + }; + + clocks { + ckih1 { + clock-frequency = <0>; + }; + }; + + panel: panel { + compatible = "giantplus,gpg482739qs5", "simple-panel"; + power-supply = <®_panel>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&disp0_out>; + }; + }; + }; + + display@di0 { + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0>; + crtcs = <&ipu 0>; + interface-pix-fmt = "bgr24"; + status = "okay"; + fsl,panel = <&panel>; + + port@0 { + disp0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + + port@1 { + disp0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&ldo3>; + enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + backlight-boot-off; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + reg_panel: vdd-panel { + compatible = "regulator-fixed"; + regulator-name = "VDD_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg: vbus-otg { + compatible = "regulator-fixed"; + regulator-name = "VBUS_OTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + }; + + reg_usbh1: vbus-h1 { + compatible = "regulator-fixed"; + regulator-name = "VBUS_H1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + bitrate = <100000>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + + pmic: dialog@48 { /* DA9053-3HHA1 PMIC */ + compatible = "dialog,da9053-aa", "dialog,da9052"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1 { /* CORE */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2 { /* PRO */ + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3 { /* MEM */ + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4 { /* PERI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: ldo3 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + temperature-sensor@49 { + compatible = "ti,lm73"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "atmel,24c32", "st,m24c32"; + reg = <0x50>; + pagesize = <1>; + status = "okay"; + }; + + rtc: nxp@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + bitrate = <100000>; + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touch: edt-ft5x06@38 { + compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <14 0>; + }; +}; + +&ipu_di0_disp0 { + remote-endpoint = <&disp0_in>; +}; + +/* RS485 --> X39 [13..14] */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + /* RTS via GPIO */ + fsl,uart-has-rtscts; + rs485-enabled; + gpio = <&gpio7 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usbotg>; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +/* Serial debug console --> X39 [2..5] */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* Serial debug console --> X11 [5..7] */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&nfc { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; + + partition@0 { + label = "barebox"; + reg = <0x0 0x80000>; + }; + + bareboxenv: partition@1 { + label = "barebox-environment"; + reg = <0x80000 0x80000>; + }; + + partition@2 { + label = "ubi"; + reg = <0x100000 0x0>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-vincell-lt { + pinctrl_can1: can1grp { + fsl,pins = < + MX53_PAD_GPIO_7__CAN1_TXCAN 0x00000000 + MX53_PAD_GPIO_8__CAN1_RXCAN 0x000001c4 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_EIM_A25__EMI_WEIM_A_25 0x000000e4 + MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x000000e4 + MX53_PAD_EIM_D16__EMI_WEIM_D_16 0x000000a4 + MX53_PAD_EIM_D17__EMI_WEIM_D_17 0x000000a4 + MX53_PAD_EIM_D18__EMI_WEIM_D_18 0x000000a4 + MX53_PAD_EIM_D19__EMI_WEIM_D_19 0x000000a4 + MX53_PAD_EIM_D20__EMI_WEIM_D_20 0x000000a4 + MX53_PAD_EIM_D21__EMI_WEIM_D_21 0x000000a4 + MX53_PAD_EIM_D22__EMI_WEIM_D_22 0x000000a4 + MX53_PAD_EIM_D23__EMI_WEIM_D_23 0x000000a4 + MX53_PAD_EIM_D24__EMI_WEIM_D_24 0x000000a4 + MX53_PAD_EIM_D25__EMI_WEIM_D_25 0x000000a4 + MX53_PAD_EIM_D26__EMI_WEIM_D_26 0x000000a4 + MX53_PAD_EIM_D27__EMI_WEIM_D_27 0x000000a4 + MX53_PAD_EIM_D28__EMI_WEIM_D_28 0x000000a4 + MX53_PAD_EIM_D29__EMI_WEIM_D_29 0x000000a4 + MX53_PAD_EIM_D30__EMI_WEIM_D_30 0x000000a4 + MX53_PAD_EIM_D31__EMI_WEIM_D_31 0x000000a4 + MX53_PAD_EIM_A24__EMI_WEIM_A_24 0x000001e4 + MX53_PAD_EIM_A23__EMI_WEIM_A_23 0x000001e4 + MX53_PAD_EIM_A22__EMI_WEIM_A_22 0x000000e4 + MX53_PAD_EIM_A21__EMI_WEIM_A_21 0x000000e4 + MX53_PAD_EIM_A20__EMI_WEIM_A_20 0x000000a4 + MX53_PAD_EIM_A19__EMI_WEIM_A_19 0x000000a4 + MX53_PAD_EIM_A18__EMI_WEIM_A_18 0x000000a4 + MX53_PAD_EIM_A17__EMI_WEIM_A_17 0x000000a4 + MX53_PAD_EIM_A16__EMI_WEIM_A_16 0x000000a4 + MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 0x000000a4 + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x000000e4 + MX53_PAD_EIM_OE__EMI_WEIM_OE 0x000000a4 + MX53_PAD_EIM_RW__EMI_WEIM_RW 0x000000a4 + MX53_PAD_EIM_LBA__EMI_WEIM_LBA 0x000000e4 + MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 0x000000a4 + MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 0x000000a4 + MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 0x000001e4 + MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 0x000001e4 + MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT 0x000000e0 + MX53_PAD_LVDS0_TX3_P__GPIO7_22 0x80000000 + MX53_PAD_LVDS0_CLK_P__GPIO7_24 0x80000000 + MX53_PAD_LVDS0_TX2_P__GPIO7_26 0x80000000 + MX53_PAD_LVDS0_TX1_P__GPIO7_28 0x80000000 + MX53_PAD_LVDS0_TX0_P__GPIO7_30 0x80000000 + MX53_PAD_GPIO_1__GPIO1_1 0x000001c4 + MX53_PAD_GPIO_2__GPIO1_2 0x000001c4 + MX53_PAD_GPIO_10__GPIO4_0 0x000005e5 + MX53_PAD_GPIO_11__GPIO4_1 0x000005c5 + MX53_PAD_GPIO_12__GPIO4_2 0x000005e5 + MX53_PAD_GPIO_13__GPIO4_3 0x000005e5 + MX53_PAD_GPIO_14__GPIO4_4 0x000005e5 + MX53_PAD_GPIO_16__GPIO7_11 0x000001c4 + MX53_PAD_KEY_ROW2__GPIO4_11 0x000001e4 + MX53_PAD_PATA_DATA8__GPIO2_8 0x000001e4 + MX53_PAD_PATA_DATA12__PATA_DATA_12 0x000001e4 + MX53_PAD_PATA_DA_0__PATA_DA_0 0x000001e4 + + /* UART5: MDB --> X39 [2..5] (shared with RS232) */ + MX53_PAD_PATA_DATA9__GPIO2_9 0x00000000 /* MDB_WAKEUP_OUT */ + + /* UART3: RS485 --> X39 */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x00000000 /* RS485_TX_EN */ + + MX53_PAD_PATA_DATA4__GPIO2_4 0x00000000 /* FEC_nINT */ + + /* LCD panel */ + MX53_PAD_DI0_PIN4__GPIO4_20 0x000004c4 /* lcd power */ + MX53_PAD_PATA_DATA2__GPIO2_2 0x00000000 /* backlight power */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x00000020 /* lcd enable */ + MX53_PAD_GPIO_9__PWM1_PWMO 0x00000000 /* LCD backlight PWM1 out */ + + /* ESDHC1 */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x00000000 /* ESDHC1 CD */ + + /* I2C system bus */ + /* MX53_PAD_CSI0_DAT8__GPIO5_26 0x00000000 */ + /* MX53_PAD_CSI0_DAT9__GPIO5_27 */ + + /* I2C external touch interface, disabled */ + /* MX53_PAD_GPIO_5__GPIO1_50x80000000 */ + /* MX53_PAD_GPIO_6__GPIO1_60x80000000 */ + + /* External Touch */ + MX53_PAD_PATA_DATA13__GPIO2_13 0x00000000 /* TOUCH_RESET */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x00000000 /* TOUCH_INT */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x00000000 /* TOUCH_WAKE */ + + /* Audio */ + MX53_PAD_PATA_DATA7__GPIO2_7 0x00000000 /* Speaker on */ + + /* Clockout for external USB-phy and audiocodec */ + MX53_PAD_GPIO_3__CCM_CLKO2 0x00000000 + + /* GPIOs on keypad connector (X21) */ + MX53_PAD_CSI0_DAT11__GPIO5_29 0x00000000 /* Pin 3 */ + MX53_PAD_PATA_DIOW__GPIO6_17 0x00000000 /* Pin 4 */ + MX53_PAD_SD2_CMD__GPIO1_11 0x00000000 /* Pin 5 */ + MX53_PAD_PATA_DMACK__GPIO6_18 0x00000000 /* Pin 6 */ + MX53_PAD_CSI0_DAT7__GPIO5_25 0x00000000 /* Pin 7 */ + MX53_PAD_GPIO_4__GPIO1_4 0x00000000 /* Pin 8 */ + MX53_PAD_KEY_ROW4__GPIO4_15 0x00000000 /* Pin 9 */ + MX53_PAD_KEY_COL4__GPIO4_14 0x00000000 /* Pin 10 */ + MX53_PAD_KEY_ROW3__GPIO4_13 0x00000000 /* Pin 11 */ + MX53_PAD_KEY_COL3__GPIO4_12 0x00000000 /* Pin 12 */ + MX53_PAD_GPIO_19__GPIO4_5 0x00000000 /* Pin 13 */ + MX53_PAD_KEY_COL2__GPIO4_10 0x00000000 /* Pin 14 */ + MX53_PAD_KEY_COL1__GPIO4_8 0x00000000 /* Pin 15 */ + MX53_PAD_KEY_ROW0__GPIO4_7 0x00000000 /* Pin 16 */ + MX53_PAD_KEY_COL0__GPIO4_6 0x00000000 /* Pin 17 */ + MX53_PAD_KEY_ROW1__GPIO4_9 0x00000000 /* Pin 18 */ + + MX53_PAD_GPIO_17__GPIO7_12 0x000000e0 /* PMIC_nIRQ, 100 KOhm pull up */ + >; + }; + + pinctrl_disp0: disp0grp { + fsl,pins = < + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x000004c1 + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x000004c1 + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x000004c5 + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x000004c5 + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x000004c3 + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x000004c3 + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x000004c3 + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x000004c3 + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x000004c3 + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x000004c3 + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x000004c3 + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x000004c3 + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x000004c3 + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x000004c3 + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x000004c3 + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x000004c3 + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x000004c3 + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x000004c3 + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x000004c3 + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x000004c3 + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x000004c3 + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x000004c3 + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x000004c3 + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x000004c3 + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x000004c3 + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x000004c3 + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x000004c3 + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x000004c3 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x00000004 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x00000004 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x00000004 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x00000004 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0x000000e4 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0x000000e0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x00000004 + MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 0x000001e4 + MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 0x000001e4 + MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 0x000001e4 + + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x000000a4 + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x000000a4 + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x000000a4 + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x000000a4 + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x000000a4 + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x000000a4 + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x000000a4 + MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0x000000a4 + MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 0x000000e4 + MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 0x000000e4 + MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 0x000000e4 + MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 0x000000e4 + MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 0x000000e4 + MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 0x000000e4 + MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 0x000000e4 + MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 0x000000e4 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x00000000 /* OC */ + MX53_PAD_GPIO_0__USBOH3_USBH1_PWR 0x00000000 /* PWR_EN */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x00000084 /* OC */ + /* can not be used, odd transistor logic */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x00000000 /* PWR_EN */ + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 + MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 + MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 + MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 + MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 + MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT18__UART5_RTS 0x1c5 + MX53_PAD_CSI0_DAT19__UART5_CTS 0x1c5 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 + MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1c5 + MX53_PAD_CSI0_DAT16__UART4_RTS 0x1c5 + MX53_PAD_CSI0_DAT17__UART4_CTS 0x1c5 + >; + }; + }; +}; |