diff options
Diffstat (limited to 'arch/arm/dts/imx8mq.dtsi')
| -rw-r--r-- | arch/arm/dts/imx8mq.dtsi | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi index 1ddb51f898..d6a4c715bd 100644 --- a/arch/arm/dts/imx8mq.dtsi +++ b/arch/arm/dts/imx8mq.dtsi @@ -4,6 +4,7 @@ * Copyright (C) 2017 Pengutronix, Lucas Stach <kernel@pengutronix.de> */ +#include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/thermal/thermal.h> / { @@ -106,6 +107,67 @@ reg = <0x30350000 0x10000>; clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; }; + + src: src@30390000 { + compatible = "fsl,imx8mq-src", "syscon"; + reg = <0x30390000 0x10000>; + #reset-cells = <1>; + }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mq-gpc", "fsl,imx7d-gpc"; + reg = <0x303a0000 0x10000>; + #power-domain-cells = <1>; + + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + /* + * As per comment in ATF source code: + * + * PCIE1 and PCIE2 share the + * same reset signal, if we power + * down PCIE2, PCIE1 will be held + * in reset too. + * + * So instead of creating two + * separate power domains for + * PCIE1 and PCIE2. We create + * a link between 1 and 10 and + * use what was supposed to be + * domain 1 as a shared PCIE + * power domain powering both + * PCIE1 and PCIE2 at the same + * time + */ + pgc_pcie_phy: gpc_power_domain@1 { + #power-domain-cells = <0>; + reg = <1>; + power-domains = <&pgc_pcie2_phy>; + }; + + pgc_otg1: power-domain@2 { + #power-domain-cells = <0>; + reg = <2>; + }; + + pgc_otg2: power-domain@3 { + #power-domain-cells = <0>; + reg = <3>; + }; + + pgc_pcie2_phy: gpc_power_domain@10 { + #power-domain-cells = <0>; + reg = <10>; + }; + }; + }; }; bus@30800000 { @@ -119,6 +181,128 @@ status = "disabled"; }; }; + + + usb_dwc3_0: usb@38100000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38100000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <500000000>, <100000000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy0>, <&usb3_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&pgc_otg1>; + status = "disabled"; + }; + + usb3_phy0: phy@381f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x381f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <100000000>; + #phy-cells = <0>; + status = "disabled"; + }; + + usb_dwc3_1: usb@38200000 { + compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; + reg = <0x38200000 0x10000>; + clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>, + <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; + clock-names = "bus_early", "ref", "suspend"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, + <&clk IMX8MQ_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <500000000>, <100000000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + power-domains = <&pgc_otg2>; + status = "disabled"; + }; + + usb3_phy1: phy@382f0040 { + compatible = "fsl,imx8mq-usb-phy"; + reg = <0x382f0040 0x40>; + clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>; + clock-names = "phy"; + assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>; + assigned-clock-rates = <100000000>; + #phy-cells = <0>; + status = "disabled"; + }; + + pcie0: pcie@33800000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33800000 0x400000>, + <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX8MQ_RESET_PCIEPHY>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + fsl,controller-id = <0>; + status = "disabled"; + }; + + pcie1: pcie@33c00000 { + compatible = "fsl,imx8mq-pcie"; + reg = <0x33c00000 0x400000>, + <0x27f00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000 /* downstream I/O 64KB */ + 0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <2>; + power-domains = <&pgc_pcie_phy>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + fsl,controller-id = <1>; + status = "disabled"; + }; }; }; |