diff options
Diffstat (limited to 'arch/arm/dts/vf610-zii-cfu1-rev-a.dts')
| -rw-r--r-- | arch/arm/dts/vf610-zii-cfu1-rev-a.dts | 209 |
1 files changed, 0 insertions, 209 deletions
diff --git a/arch/arm/dts/vf610-zii-cfu1-rev-a.dts b/arch/arm/dts/vf610-zii-cfu1-rev-a.dts deleted file mode 100644 index 7e87a15c11..0000000000 --- a/arch/arm/dts/vf610-zii-cfu1-rev-a.dts +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2015, 2016 Zodiac Inflight Innovations - * - * Based on an original 'vf610-twr.dts' which is Copyright 2015, - * Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include <arm/vf610-zii-dev.dtsi> - -#include "vf610-zii-dev.dtsi" - -/ { - model = "ZII VF610 CFU1 Switch Management Board"; - compatible = "zii,vf610cfu1-a", "zii,vf610dev", "fsl,vf610"; - - aliases { - /delete-property/ serial1; - /delete-property/ serial2; - }; - - gpio-leds { - debug { - gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; - }; - - fail { - label = "zii_fail"; - gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; - default-state = "off"; - max-brightness = <1>; - }; - - status { - label = "zii_status"; - gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; - default-state = "off"; - max-brightness = <1>; - }; - - status_a { - label = "zii_status_a"; - gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; - default-state = "off"; - max-brightness = <1>; - }; - - status_b { - label = "zii_status_b"; - gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; - default-state = "on"; - max-brightness = <1>; - }; - }; -}; - -&dspi1 { - bus-num = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dspi1>; - status = "okay"; - - m25p128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p128", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partition@0 { - label = "m25p128-0"; - reg = <0x0 0x01000000>; - }; - }; -}; - -&esdhc0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc0>; - bus-width = <8>; - status = "okay"; -}; - -&fec0 { - status = "disabled"; -}; - -&i2c0 { - clock-frequency = <400000>; - - pca9554@22 { - compatible = "nxp,pca9554"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -/delete-node/ &i2c1; -/delete-node/ &i2c2; -/delete-node/ &uart1; -/delete-node/ &uart2; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_hog: hoggrp { - fsl,pins = < - VF610_PAD_PTE2__GPIO_107 0x31c2 /* SOC_SW_RSTn */ - VF610_PAD_PTB28__GPIO_98 0x31c1 /* E6352_INTn */ - - /* PTE27 is wired to signal SD on part CONN - * SFF-F4 via net FIM_DS. An active high - * on this indicates a received optical - * signal - - * SPEED=0b11 HIGH, SRE=0b0, ODE=0b0, HYS=0b0 - * DSE=0b001 150Ohm, PUS=0b10 100k UP - * PKE=0b0, PUE=0b0, OBE=0b0, IBE=0b1 - */ - VF610_PAD_PTE27__GPIO_132 0x3061 - - /* - * PTE13 is wired to signal T_DIS on part CONN - * SFF-F4 via net FIM_TDIS. Setting this high - * will disable optical output from the SFF-F4 - - * SPEED=0b11 HIGH, SRE=0b0, ODE=0b0, HYS=0b0 - * DSE=0b001 150Ohm, PUS=0b00 100k DOWN - * PKE=0b0, PUE=0b0, OBE=0b1, IBE=0b1 - * TODO: probably want IBE=0b0 - */ - VF610_PAD_PTE13__GPIO_118 0x3043 - >; - }; - - pinctrl_dspi1: dspi1grp { - fsl,pins = < - VF610_PAD_PTD5__DSPI1_CS0 0x1182 - VF610_PAD_PTC6__DSPI1_SIN 0x1181 - VF610_PAD_PTC7__DSPI1_SOUT 0x1182 - VF610_PAD_PTC8__DSPI1_SCK 0x1182 - >; - }; - - pinctrl_esdhc0: esdhc0grp { - fsl,pins = < - VF610_PAD_PTC0__ESDHC0_CLK 0x31ef - VF610_PAD_PTC1__ESDHC0_CMD 0x31ef - VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef - VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef - VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef - VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef - VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef - VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef - VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef - VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef - >; - }; - - pinctrl_leds_debug: pinctrl-leds-debug { - fsl,pins = < - VF610_PAD_PTD3__GPIO_82 0x31c2 - VF610_PAD_PTE3__GPIO_108 0x31c2 - VF610_PAD_PTE4__GPIO_109 0x31c2 - VF610_PAD_PTE5__GPIO_110 0x31c2 - VF610_PAD_PTE6__GPIO_111 0x31c2 - >; - }; -}; |