diff options
Diffstat (limited to 'board/freescale-mx35-3-stack')
| -rw-r--r-- | board/freescale-mx35-3-stack/lowlevel_init.S | 340 |
1 files changed, 170 insertions, 170 deletions
diff --git a/board/freescale-mx35-3-stack/lowlevel_init.S b/board/freescale-mx35-3-stack/lowlevel_init.S index a00d2af056..324b02b816 100644 --- a/board/freescale-mx35-3-stack/lowlevel_init.S +++ b/board/freescale-mx35-3-stack/lowlevel_init.S @@ -27,9 +27,9 @@ #include <asm/cache-l2x0.h> #include "board-mx35_3stack.h" -#define CSD0_BASE_ADDR 0x80000000 -#define ESDCTL_BASE_ADDR 0xB8001000 -#define CSD1_BASE_ADDR 0x90000000 +#define CSD0_BASE_ADDR 0x80000000 +#define ESDCTL_BASE_ADDR 0xB8001000 +#define CSD1_BASE_ADDR 0x90000000 #define writel(val, reg) \ ldr r0, =reg; \ @@ -42,84 +42,84 @@ strb r1, [r0]; /* Assuming 24MHz input clock */ -#define MPCTL_PARAM_399 (IMX_PLL_PD(0) | IMX_PLL_MFD(15) | IMX_PLL_MFI(8) | IMX_PLL_MFN(5)) -#define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1)) -#define PPCTL_PARAM_300 (IMX_PLL_PD(0) | IMX_PLL_MFD(3) | IMX_PLL_MFI(6) | IMX_PLL_MFN(1)) +#define MPCTL_PARAM_399 (IMX_PLL_PD(0) | IMX_PLL_MFD(15) | IMX_PLL_MFI(8) | IMX_PLL_MFN(5)) +#define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1)) +#define PPCTL_PARAM_300 (IMX_PLL_PD(0) | IMX_PLL_MFD(3) | IMX_PLL_MFI(6) | IMX_PLL_MFN(1)) .section ".text_bare_init","ax" -ARM_PPMRR: .word 0x40000015 -L2CACHE_PARAM: .word 0x00030024 -CCM_CCMR_W: .word 0x003F4208 -CCM_PDR0_W: .word 0x00001000 -MPCTL_PARAM_399_W: .word MPCTL_PARAM_399 -MPCTL_PARAM_532_W: .word MPCTL_PARAM_532 -PPCTL_PARAM_W: .word PPCTL_PARAM_300 -CCM_BASE_ADDR_W: .word IMX_CCM_BASE +ARM_PPMRR: .word 0x40000015 +L2CACHE_PARAM: .word 0x00030024 +CCM_CCMR_W: .word 0x003F4208 +CCM_PDR0_W: .word 0x00001000 +MPCTL_PARAM_399_W: .word MPCTL_PARAM_399 +MPCTL_PARAM_532_W: .word MPCTL_PARAM_532 +PPCTL_PARAM_W: .word PPCTL_PARAM_300 +CCM_BASE_ADDR_W: .word IMX_CCM_BASE .globl board_init_lowlevel board_init_lowlevel: - mov r10, lr + mov r10, lr - mrc 15, 0, r1, c1, c0, 0 + mrc 15, 0, r1, c1, c0, 0 - mrc 15, 0, r0, c1, c0, 1 - orr r0, r0, #7 - mcr 15, 0, r0, c1, c0, 1 + mrc 15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr 15, 0, r0, c1, c0, 1 - orr r1, r1, #(1<<11) /* Flow prediction (Z) */ - orr r1, r1, #(1<<22) /* unaligned accesses */ - orr r1, r1, #(1<<21) /* Low Int Latency */ + orr r1, r1, #(1 << 11) /* Flow prediction (Z) */ + orr r1, r1, #(1 << 22) /* unaligned accesses */ + orr r1, r1, #(1 << 21) /* Low Int Latency */ - mcr 15, 0, r1, c1, c0, 0 + mcr 15, 0, r1, c1, c0, 0 - mov r0, #0 - mcr 15, 0, r0, c15, c2, 4 + mov r0, #0 + mcr 15, 0, r0, c15, c2, 4 /* - * Branch predicition is now enabled. Flush the BTAC to ensure a valid - * starting point. Don't flush BTAC while it is disabled to avoid + * Branch predicition is now enabled. Flush the BTAC to ensure a valid + * starting point. Don't flush BTAC while it is disabled to avoid * ARM1136 erratum 408023. */ - mov r0, #0 - mcr p15, 0, r0, c7, c5, 6 /* flush entire BTAC */ + mov r0, #0 + mcr p15, 0, r0, c7, c5, 6 /* flush entire BTAC */ - mov r0, #0 - mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ - mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + mov r0, #0 + mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ + mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ + mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ /* Also setup the Peripheral Port Remap register inside the core */ - ldr r0, ARM_PPMRR /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 + ldr r0, ARM_PPMRR /* start from AIPS 2GB region */ + mcr p15, 0, r0, c15, c2, 4 /* * End of ARM1136 init */ - ldr r0, CCM_BASE_ADDR_W + ldr r0, CCM_BASE_ADDR_W - ldr r2, CCM_CCMR_W - str r2, [r0, #CCM_CCMR] + ldr r2, CCM_CCMR_W + str r2, [r0, #CCM_CCMR] - ldr r3, MPCTL_PARAM_532_W /* consumer path*/ + ldr r3, MPCTL_PARAM_532_W /* consumer path*/ - /* Set MPLL , arm clock and ahb clock*/ - str r3, [r0, #CCM_MPCTL] + /* Set MPLL, arm clock and ahb clock */ + str r3, [r0, #CCM_MPCTL] - ldr r1, PPCTL_PARAM_W - str r1, [r0, #CCM_PPCTL] + ldr r1, PPCTL_PARAM_W + str r1, [r0, #CCM_PPCTL] - ldr r1, CCM_PDR0_W - str r1, [r0, #CCM_PDR0] + ldr r1, CCM_PDR0_W + str r1, [r0, #CCM_PDR0] - ldr r1, [r0, #CCM_CGR0] - orr r1, r1, #0x00300000 - str r1, [r0, #CCM_CGR0] + ldr r1, [r0, #CCM_CGR0] + orr r1, r1, #0x00300000 + str r1, [r0, #CCM_CGR0] - ldr r1, [r0, #CCM_CGR1] - orr r1, r1, #0x00000C00 - orr r1, r1, #0x00000003 - str r1, [r0, #CCM_CGR1] + ldr r1, [r0, #CCM_CGR1] + orr r1, r1, #0x00000C00 + orr r1, r1, #0x00000003 + str r1, [r0, #CCM_CGR1] /* Skip SDRAM initialization if we run from RAM */ cmp pc, #0x80000000 @@ -130,33 +130,33 @@ board_init_lowlevel: mov pc, r10 1: - ldr r0, =ESDCTL_BASE_ADDR - mov r3, #0x2000 - str r3, [r0, #0x0] - str r3, [r0, #0x8] + ldr r0, =ESDCTL_BASE_ADDR + mov r3, #0x2000 + str r3, [r0, #0x0] + str r3, [r0, #0x8] - /* ip(r12) has used to save lr register in upper calling*/ - mov fp, lr + /* ip(r12) has used to save lr register in upper calling */ + mov fp, lr - mov r5, #0x00 - mov r2, #0x00 - mov r1, #CSD0_BASE_ADDR - bl setup_sdram_bank - cmp r3, #0x0 - orreq r5, r5, #1 - eorne r2, r2, #0x1 - blne setup_sdram_bank + mov r5, #0x00 + mov r2, #0x00 + mov r1, #CSD0_BASE_ADDR + bl setup_sdram_bank + cmp r3, #0x0 + orreq r5, r5, #1 + eorne r2, r2, #0x1 + blne setup_sdram_bank - mov lr, fp + mov lr, fp - ldr r3, =ESDCTL_DELAY_LINE5 - str r3, [r0, #0x30] + ldr r3, =ESDCTL_DELAY_LINE5 + str r3, [r0, #0x30] #ifdef CONFIG_NAND_IMX_BOOT - ldr sp, =TEXT_BASE - 4 /* Setup a temporary stack in SDRAM */ + ldr sp, =TEXT_BASE - 4 /* Setup a temporary stack in SDRAM */ - ldr r0, =IMX_NFC_BASE /* start of NFC SRAM */ - ldr r2, =IMX_NFC_BASE + 0x800 /* end of NFC SRAM */ + ldr r0, =IMX_NFC_BASE /* start of NFC SRAM */ + ldr r2, =IMX_NFC_BASE + 0x800 /* end of NFC SRAM */ /* skip NAND boot if not running from NFC space */ cmp pc, r0 @@ -165,119 +165,119 @@ board_init_lowlevel: bhs ret /* Move ourselves out of NFC SRAM */ - ldr r1, =TEXT_BASE + ldr r1, =TEXT_BASE copy_loop: - ldmia r0!, {r3-r9} /* copy from source address [r0] */ - stmia r1!, {r3-r9} /* copy to target address [r1] */ - cmp r0, r2 /* until source end addreee [r2] */ + ldmia r0!, {r3-r9} /* copy from source address [r0] */ + stmia r1!, {r3-r9} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ ble copy_loop - ldr pc, =1f /* Jump to SDRAM */ + ldr pc, =1f /* Jump to SDRAM */ 1: - bl nand_boot /* Load U-Boot from NAND Flash */ + bl nand_boot /* Load U-Boot from NAND Flash */ /* rebase the return address */ ldr r1, =IMX_NFC_BASE - TEXT_BASE - sub r10, r10, r1 /* adjust return address from NFC SRAM */ + sub r10, r10, r1 /* adjust return address from NFC SRAM */ ret: #endif /* CONFIG_NAND_IMX_BOOT */ - mov pc, r10 + mov pc, r10 /* * r0: ESDCTL control base, r1: sdram slot base - * r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base + * r2: DDR type (0: DDR2, 1: MDDR) r3, r4: working base */ setup_sdram_bank: - mov r3, #0xE /*0xA + 0x4*/ - tst r2, #0x1 - orreq r3, r3, #0x300 /*DDR2*/ - str r3, [r0, #0x10] - bic r3, r3, #0x00A - str r3, [r0, #0x10] - beq 2f - - mov r3, #0x20000 -1: subs r3, r3, #1 - bne 1b - -2: tst r2, #0x1 - ldreq r3, =ESDCTL_DDR2_CONFIG - ldrne r3, =ESDCTL_MDDR_CONFIG - cmp r1, #CSD1_BASE_ADDR - strlo r3, [r0, #0x4] - strhs r3, [r0, #0xC] - - ldr r3, =ESDCTL_0x92220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - ldr r4, =ESDCTL_PRECHARGE - strb r3, [r1, r4] - - tst r2, #0x1 - bne skip_set_mode - - cmp r1, #CSD1_BASE_ADDR - ldr r3, =ESDCTL_0xB2220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - ldr r4, =ESDCTL_DDR2_EMR2 - strb r3, [r1, r4] - ldr r4, =ESDCTL_DDR2_EMR3 - strb r3, [r1, r4] - ldr r4, =ESDCTL_DDR2_EN_DLL - strb r3, [r1, r4] - ldr r4, =ESDCTL_DDR2_RESET_DLL - strb r3, [r1, r4] - - ldr r3, =ESDCTL_0x92220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - ldr r4, =ESDCTL_PRECHARGE - strb r3, [r1, r4] + mov r3, #0xE /* 0xA + 0x4 */ + tst r2, #0x1 + orreq r3, r3, #0x300 /* DDR2 */ + str r3, [r0, #0x10] + bic r3, r3, #0x00A + str r3, [r0, #0x10] + beq 2f + + mov r3, #0x20000 +1: subs r3, r3, #1 + bne 1b + +2: tst r2, #0x1 + ldreq r3, =ESDCTL_DDR2_CONFIG + ldrne r3, =ESDCTL_MDDR_CONFIG + cmp r1, #CSD1_BASE_ADDR + strlo r3, [r0, #0x4] + strhs r3, [r0, #0xC] + + ldr r3, =ESDCTL_0x92220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_PRECHARGE + strb r3, [r1, r4] + + tst r2, #0x1 + bne skip_set_mode + + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0xB2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_DDR2_EMR2 + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_EMR3 + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_EN_DLL + strb r3, [r1, r4] + ldr r4, =ESDCTL_DDR2_RESET_DLL + strb r3, [r1, r4] + + ldr r3, =ESDCTL_0x92220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + ldr r4, =ESDCTL_PRECHARGE + strb r3, [r1, r4] skip_set_mode: - cmp r1, #CSD1_BASE_ADDR - ldr r3, =ESDCTL_0xA2220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - mov r3, #0xDA - strb r3, [r1] - strb r3, [r1] - - ldr r3, =ESDCTL_0xB2220000 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - tst r2, #0x1 - ldreq r4, =ESDCTL_DDR2_MR - ldrne r4, =ESDCTL_MDDR_MR - mov r3, #0xDA - strb r3, [r1, r4] - ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT - streqb r3, [r1, r4] - ldreq r4, =ESDCTL_DDR2_EN_DLL - ldrne r4, =ESDCTL_MDDR_EMR - strb r3, [r1, r4] - - cmp r1, #CSD1_BASE_ADDR - ldr r3, =ESDCTL_0x82228080 - strlo r3, [r0, #0x0] - strhs r3, [r0, #0x8] - - tst r2, #0x1 - moveq r4, #0x20000 - movne r4, #0x200 -1: subs r4, r4, #1 - bne 1b - - str r3, [r1, #0x100] - ldr r4, [r1, #0x100] - cmp r3, r4 - movne r3, #1 - moveq r3, #0 - - mov pc, lr + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0xA2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + mov r3, #0xDA + strb r3, [r1] + strb r3, [r1] + + ldr r3, =ESDCTL_0xB2220000 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + tst r2, #0x1 + ldreq r4, =ESDCTL_DDR2_MR + ldrne r4, =ESDCTL_MDDR_MR + mov r3, #0xDA + strb r3, [r1, r4] + ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT + streqb r3, [r1, r4] + ldreq r4, =ESDCTL_DDR2_EN_DLL + ldrne r4, =ESDCTL_MDDR_EMR + strb r3, [r1, r4] + + cmp r1, #CSD1_BASE_ADDR + ldr r3, =ESDCTL_0x82228080 + strlo r3, [r0, #0x0] + strhs r3, [r0, #0x8] + + tst r2, #0x1 + moveq r4, #0x20000 + movne r4, #0x200 +1: subs r4, r4, #1 + bne 1b + + str r3, [r1, #0x100] + ldr r4, [r1, #0x100] + cmp r3, r4 + movne r3, #1 + moveq r3, #0 + + mov pc, lr |