diff options
Diffstat (limited to 'board/mpl/pip405/pip405.h')
| -rw-r--r-- | board/mpl/pip405/pip405.h | 148 |
1 files changed, 0 insertions, 148 deletions
diff --git a/board/mpl/pip405/pip405.h b/board/mpl/pip405/pip405.h deleted file mode 100644 index b41c5bb282..0000000000 --- a/board/mpl/pip405/pip405.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - /**************************************************************************** - * Global routines used for PIP405 - *****************************************************************************/ - -#ifndef __ASSEMBLY__ - -extern int mem_test(unsigned long start, unsigned long ramsize,int mode); - -void print_pip405_info(void); - -void user_led0(unsigned char on); -void user_led1(unsigned char on); - - -#define PLD_BASE_ADDRESS CFG_ISA_IO_BASE_ADDRESS + 0x800 -#define PLD_PART_REG PLD_BASE_ADDRESS + 0 -#define PLD_VERS_REG PLD_BASE_ADDRESS + 1 -#define PLD_BOARD_CFG_REG PLD_BASE_ADDRESS + 2 -#define PLD_LED_USER_REG PLD_BASE_ADDRESS + 3 -#define PLD_SYS_MAN_REG PLD_BASE_ADDRESS + 4 -#define PLD_FLASH_COM_REG PLD_BASE_ADDRESS + 5 -#define PLD_CAN_REG PLD_BASE_ADDRESS + 6 -#define PLD_SER_PWR_REG PLD_BASE_ADDRESS + 7 -#define PLD_COM_PWR_REG PLD_BASE_ADDRESS + 8 -#define PLD_NIC_VGA_REG PLD_BASE_ADDRESS + 9 -#define PLD_SCSI_RST_REG PLD_BASE_ADDRESS + 0xA - -#define PIIX4_VENDOR_ID 0x8086 -#define PIIX4_IDE_DEV_ID 0x7111 - -#endif - -/* timings */ - -/* CS Config register (CS7) */ -#define CONFIG_PORT_BME 0 /* Burst disable */ -#define CONFIG_PORT_TWE 255 /* 255 * 30ns 120ns Waitstates (access=TWT+1+TH) */ -#define CONFIG_PORT_CSN 1 /* Chipselect is driven inactive for 1 Cycle BTW transfers */ -#define CONFIG_PORT_OEN 1 /* Cycles from CS low to OE low */ -#define CONFIG_PORT_WBN 1 /* Cycles from CS low to WE low */ -#define CONFIG_PORT_WBF 1 /* Cycles from WE high to CS high */ -#define CONFIG_PORT_TH 2 /* Number of hold cycles after transfer */ -#define CONFIG_PORT_RE 0 /* Ready disabled */ -#define CONFIG_PORT_SOR 1 /* Sample on Ready disabled */ -#define CONFIG_PORT_BEM 0 /* Byte Write only active on Write cycles */ -#define CONFIG_PORT_PEN 0 /* Parity disable */ -#define CONFIG_PORT_AP ((CONFIG_PORT_BME << 31) + (CONFIG_PORT_TWE << 23) + (CONFIG_PORT_CSN << 18) + (CONFIG_PORT_OEN << 16) + (CONFIG_PORT_WBN << 14) + \ - (CONFIG_PORT_WBF << 12) + (CONFIG_PORT_TH << 9) + (CONFIG_PORT_RE << 8) + (CONFIG_PORT_SOR << 7) + (CONFIG_PORT_BEM << 6) + (CONFIG_PORT_PEN << 5)) - -/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ -#define CONFIG_PORT_BS 0 /* 1 MByte */ -/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */ -#define CONFIG_PORT_BU 3 /* R/W */ -/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */ -#define CONFIG_PORT_BW 0 /* 16Bit */ -#define CONFIG_PORT_CR ((CONFIG_PORT_ADDR & 0xfff00000) + (CONFIG_PORT_BS << 17) + (CONFIG_PORT_BU << 15) + (CONFIG_PORT_BW << 13)) - -/* Flash CS0 or CS 1 */ -/* 0x7F8FFE80 slowest timing at all... */ -#define FLASH_BME_B 1 /* Burst enable */ -#define FLASH_FWT_B 0x6 /* 6 * 30ns 210ns First Wait Access */ -#define FLASH_BWT_B 0x6 /* 6 * 30ns 210ns Burst Wait Access */ -#define FLASH_BME 0 /* Burst disable */ -#define FLASH_TWE 0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */ -#define FLASH_CSN 0 /* Chipselect is driven inactive for 1 Cycle BTW transfers */ -#define FLASH_OEN 1 /* Cycles from CS low to OE low */ -#define FLASH_WBN 1 /* Cycles from CS low to WE low */ -#define FLASH_WBF 1 /* Cycles from WE high to CS high */ -#define FLASH_TH 2 /* Number of hold cycles after transfer */ -#define FLASH_RE 0 /* Ready disabled */ -#define FLASH_SOR 1 /* Sample on Ready disabled */ -#define FLASH_BEM 0 /* Byte Write only active on Write cycles */ -#define FLASH_PEN 0 /* Parity disable */ -/* Access Parameter Register for non Boot */ -#define FLASH_AP ((FLASH_BME << 31) + (FLASH_TWE << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \ - (FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5)) -/* Access Parameter Register for Boot */ -#define FLASH_AP_B ((FLASH_BME_B << 31) + (FLASH_FWT_B << 26) + (FLASH_BWT_B << 23) + (FLASH_CSN << 18) + (FLASH_OEN << 16) + (FLASH_WBN << 14) + \ - (FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5)) - -/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ -#define FLASH_BS FLASH_SIZE_PRELIM /* 4 MByte */ -/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */ -#define FLASH_BU 3 /* R/W */ -/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */ -#define FLASH_BW 1 /* 16Bit */ -/* CR register for Boot */ -#define FLASH_CR_B ((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13)) -/* CR register for non Boot */ -#define FLASH_CR ((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13)) - -/* MPS CS1 or CS0 */ -/* Boot CS: */ -#define MPS_BME_B 1 /* Burst enable */ -#define MPS_FWT_B 0x6/* 6 * 30ns 210ns First Wait Access */ -#define MPS_BWT_B 0x6 /* 6 * 30ns 210ns Burst Wait Access */ -#define MPS_BME 0 /* Burst disable */ -#define MPS_TWE 0xb/* 11 * 30ns 330ns Waitstates (access=TWT+1+TH) */ -#define MPS_CSN 0 /* Chipselect is driven inactive for 1 Cycle BTW transfers */ -#define MPS_OEN 1 /* Cycles from CS low to OE low */ -#define MPS_WBN 1 /* Cycles from CS low to WE low */ -#define MPS_WBF 1 /* Cycles from WE high to CS high */ -#define MPS_TH 2 /* Number of hold cycles after transfer */ -#define MPS_RE 0 /* Ready disabled */ -#define MPS_SOR 1 /* Sample on Ready disabled */ -#define MPS_BEM 0 /* Byte Write only active on Write cycles */ -#define MPS_PEN 0 /* Parity disable */ -/* Access Parameter Register for non Boot */ -#define MPS_AP ((MPS_BME << 31) + (MPS_TWE << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \ - (MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5)) -/* Access Parameter Register for Boot */ -#define MPS_AP_B ((MPS_BME_B << 31) + (MPS_FWT_B << 26) + (MPS_BWT_B << 23) + (MPS_CSN << 18) + (MPS_OEN << 16) + (MPS_WBN << 14) + \ - (MPS_WBF << 12) + (MPS_TH << 9) + (MPS_RE << 8) + (MPS_SOR << 7) + (MPS_BEM << 6) + (MPS_PEN << 5)) - -/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */ -#define MPS_BS 2 /* 4 MByte */ -#define MPS_BS_B FLASH_SIZE_PRELIM /* 1 MByte */ -/* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */ -#define MPS_BU 3 /* R/W */ -/* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */ -#define MPS_BW 0 /* 8Bit */ -/* CR register for Boot */ -#define MPS_CR_B ((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13)) -/* CR register for non Boot */ -#define MPS_CR ((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13)) |