summaryrefslogtreecommitdiffstats
path: root/common/ddr_spd.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/ddr_spd.c')
-rw-r--r--common/ddr_spd.c615
1 files changed, 578 insertions, 37 deletions
diff --git a/common/ddr_spd.c b/common/ddr_spd.c
index 7089923afb..b7693f3fd2 100644
--- a/common/ddr_spd.c
+++ b/common/ddr_spd.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <crc.h>
#include <ddr_spd.h>
+#include <pbl/i2c.h>
/* used for ddr1 and ddr2 spd */
static int spd_check(const u8 *buf, u8 spd_rev, u8 spd_cksum)
@@ -64,8 +65,8 @@ int ddr3_spd_check(const struct ddr3_spd_eeprom *spd)
char *p = (char *)spd;
int csum16;
int len;
- char crc_lsb; /* byte 126 */
- char crc_msb; /* byte 127 */
+ unsigned char crc_lsb; /* byte 126 */
+ unsigned char crc_msb; /* byte 127 */
/*
* SPD byte0[7] - CRC coverage
@@ -76,8 +77,8 @@ int ddr3_spd_check(const struct ddr3_spd_eeprom *spd)
len = !(spd->info_size_crc & 0x80) ? 126 : 117;
csum16 = crc_itu_t(0, p, len);
- crc_lsb = (char) (csum16 & 0xff);
- crc_msb = (char) (csum16 >> 8);
+ crc_lsb = csum16 & 0xff;
+ crc_msb = csum16 >> 8;
if (spd->crc[0] == crc_lsb && spd->crc[1] == crc_msb) {
return 0;
@@ -95,14 +96,14 @@ int ddr4_spd_check(const struct ddr4_spd_eeprom *spd)
char *p = (char *)spd;
int csum16;
int len;
- char crc_lsb; /* byte 126 */
- char crc_msb; /* byte 127 */
+ unsigned char crc_lsb; /* byte 126 */
+ unsigned char crc_msb; /* byte 127 */
len = 126;
csum16 = crc_itu_t(0, p, len);
- crc_lsb = (char) (csum16 & 0xff);
- crc_msb = (char) (csum16 >> 8);
+ crc_lsb = csum16 & 0xff;
+ crc_msb = csum16 >> 8;
if (spd->crc[0] != crc_lsb || spd->crc[1] != crc_msb) {
printf("SPD checksum unexpected.\n"
@@ -116,8 +117,8 @@ int ddr4_spd_check(const struct ddr4_spd_eeprom *spd)
len = 126;
csum16 = crc_itu_t(0, p, len);
- crc_lsb = (char) (csum16 & 0xff);
- crc_msb = (char) (csum16 >> 8);
+ crc_lsb = csum16 & 0xff;
+ crc_msb = csum16 >> 8;
if (spd->mod_section.uc[126] != crc_lsb ||
spd->mod_section.uc[127] != crc_msb) {
@@ -230,11 +231,31 @@ static int ddr2_sdram_ctime(uint8_t byte)
return ctime;
}
+static void spd_print_manufacturing_date(uint8_t year, uint8_t week)
+{
+ /*
+ * According to JEDEC Standard the year/week bytes must be in BCD
+ * format. However, that is not always true for actual DIMMs out
+ * there, so fall back to binary format if it makes more sense.
+ */
+
+ printf("%-48s ", "Manufacturing Date");
+ if ((year & 0xf0) <= 0x90 && (year & 0xf) <= 0x9
+ && (week & 0xf0) <= 0x90 && (week & 0xf) <= 0x9) {
+ printf("20%02X-W%02X", year, week);
+ } else if (year <= 99 && week >= 1 && week <= 53) {
+ printf("20%02d-W%02d", year, week);
+ } else {
+ printf("0x%02X%02X", year, week);
+ }
+ printf("\n");
+}
+
/*
* Based on
* https://github.com/groeck/i2c-tools/blob/master/eeprom/decode-dimms
*/
-void ddr_spd_print(uint8_t *record)
+static void ddr2_spd_print(uint8_t *record)
{
int highestCAS = 0;
int i, i_i, k, x, y;
@@ -245,11 +266,6 @@ void ddr_spd_print(uint8_t *record)
char *ref, *sum;
struct ddr2_spd_eeprom *s = (struct ddr2_spd_eeprom *)record;
- if (s->mem_type != SPD_MEMTYPE_DDR2) {
- printf("Can't dump information for non-DDR2 memory\n");
- return;
- }
-
ctime = ddr2_sdram_ctime(s->clk_cycle);
ddrclk = 2 * (100000 / ctime);
tbits = (s->res_7 << 8) + (s->dataw);
@@ -419,20 +435,543 @@ void ddr_spd_print(uint8_t *record)
printf("%d", record[i]);
}
printf("\n");
- printf("%-48s 20%d-W%d\n", "Manufacturing Date", record[93],
- record[94]);
+ spd_print_manufacturing_date(record[93], record[94]);
printf("%-48s 0x", "Assembly Serial Number");
for (i = 95; i < 99; i++)
printf("%02X", record[i]);
printf("\n");
}
+static const char * const ddr3_spd_moduletypes[] = {
+ "Undefined",
+ "RDIMM",
+ "UDIMM",
+ "SO-DIMM",
+ "Micro-DIMM",
+ "Mini-RDIMM",
+ "Mini-UDIMM",
+ "Mini-CDIMM",
+ "72b-SO-UDIMM",
+ "72b-SO-RDIMM",
+ "72b-SO-CDIMM",
+ "LRDIMM",
+ "16b-SO-DIMM",
+ "32b-SO-DIMM"
+};
+
+static const char * const ddr3_spd_moduletypes_width[] = {
+ "Unknown",
+ "133.35 mm",
+ "133.35 mm",
+ "67.6 mm",
+ "TBD",
+ "82.0 mm",
+ "82.0 mm",
+ "67.6 mm",
+ "67.6 mm",
+ "67.6 mm",
+ "67.6 mm",
+ "133.35 mm",
+ "67.6 mm",
+ "67.6 mm"
+};
+
+#define DDR3_UNBUFFERED 1
+#define DDR3_REGISTERED 2
+#define DDR3_CLOCKED 3
+#define DDR3_LOAD_REDUCED 4
+
+static const uint8_t ddr3_spd_moduletypes_family[] = {
+ 0,
+ DDR3_REGISTERED,
+ DDR3_UNBUFFERED,
+ DDR3_UNBUFFERED,
+ DDR3_UNBUFFERED,
+ DDR3_REGISTERED,
+ DDR3_UNBUFFERED,
+ DDR3_CLOCKED,
+ DDR3_UNBUFFERED,
+ DDR3_REGISTERED,
+ DDR3_CLOCKED,
+ DDR3_LOAD_REDUCED,
+ DDR3_UNBUFFERED,
+ DDR3_UNBUFFERED
+};
+
+static const int ddr3_std_speeds[] = {
+ 1000 * 7.5 / 8,
+ 1000 * 7.5 / 7,
+ 1000 * 1.25,
+ 1000 * 1.5,
+ 1000 * 1.875,
+ 1000 * 2.5
+};
+
+static const char * const ddr3_maximum_activated_counts[] = {
+ "Untested",
+ "700 K",
+ "600 K",
+ "500 K",
+ "400 K",
+ "300 K",
+ "200 K",
+ "Reserved",
+ "Unlimited",
+};
+
+static int ddr3_timing_from_mtb_ftb(uint16_t txx, int8_t fine_txx,
+ uint8_t mtb_dividend, uint8_t mtb_divisor,
+ uint8_t ftb_div)
+{
+ /*
+ * Given mtb in ns and ftb in ps, return the result in ps,
+ * carefully rounding to the nearest picosecond.
+ */
+ int result = txx * 10000 * mtb_dividend / mtb_divisor
+ + fine_txx * (ftb_div >> 4) / (ftb_div & 0xf);
+ return DIV_ROUND_CLOSEST(result, 10);
+}
+
+static int ddr3_adjust_ctime(int ctime, uint8_t ftb_div)
+{
+ uint8_t ftb_divisor = ftb_div >> 4;
+ uint8_t ftb_dividend = ftb_div & 0xf;
+ int i;
+
+ /*
+ * Starting with DDR3-1866, vendors may start approximating the
+ * minimum cycle time. Try to guess what they really meant so
+ * that the reported speed matches the standard.
+ */
+ for (i = 7; i < 15; i++) {
+ int test = ctime * ftb_divisor - (int)(1000 * 7.5) * ftb_divisor / i;
+
+ if (test > -(int)ftb_dividend && test < ftb_dividend)
+ return (int)(1000 * 7.5) / i;
+ }
+
+ return ctime;
+}
+
+static void ddr3_print_reference_card(uint8_t ref_raw_card, uint8_t mod_height)
+{
+ const char alphabet[] = "ABCDEFGHJKLMNPRTUVWY";
+ uint8_t ref = ref_raw_card & 0x1f;
+ uint8_t revision = mod_height >> 5;
+ char ref_card[3] = { 0 };
+
+ if (ref == 0x1f) {
+ printf("%-48s %s\n", "Module Reference Card", "ZZ");
+ return;
+ }
+
+ if (ref_raw_card & 0x80)
+ ref += 0x1f;
+ if (!revision)
+ revision = ((ref_raw_card >> 5) & 0x3);
+
+ if (ref < ARRAY_SIZE(alphabet) - 1) {
+ /* One letter reference card */
+ ref_card[0] = alphabet[ref];
+ } else {
+ /* Two letter reference card */
+ uint8_t ref1 = ref / (ARRAY_SIZE(alphabet) - 1);
+
+ ref -= (ARRAY_SIZE(alphabet) - 1) * ref1;
+ ref_card[0] = alphabet[ref1];
+ ref_card[1] = alphabet[ref];
+ }
+
+ printf("%-48s %s revision %u\n", "Module Reference Card", ref_card, revision);
+}
+
+static void ddr3_print_revision_number(const char *name, uint8_t rev)
+{
+ uint8_t h = rev >> 4;
+ uint8_t l = rev & 0xf;
+
+ /* Decode as suggested by JEDEC Standard 21-C */
+ if (!h)
+ printf("%-48s %d\n", name, l);
+ if (h < 0xa)
+ printf("%-48s %d.%d\n", name, h, l);
+ else
+ printf("%-48s %c%d\n", name, 'A' + h - 0xa, l);
+}
+
+static void ddr3_spd_print(uint8_t *record)
+{
+ struct ddr3_spd_eeprom *s = (struct ddr3_spd_eeprom *)record;
+ const char *sum;
+ uint8_t spd_len;
+ int size, bytes_written;
+ int ctime, ddrclk;
+ uint8_t tbits;
+ int pcclk;
+ uint8_t cap, k;
+ int taa, trcd, trp, tras;
+ uint16_t cas_sup;
+ int twr, trrd, trc, trfc, twtr, trtp, tfaw;
+ uint8_t die_count, loading;
+ uint8_t mac;
+ uint8_t family;
+ int i;
+
+ sum = ddr3_spd_check(s) ? "ERR" : "OK";
+
+ printf("\n---=== SPD EEPROM Information ===---\n");
+
+ printf("EEPROM CRC of bytes 0-%3d %22s %s (0x%02X%02X)\n",
+ (s->info_size_crc & 0x80) ? 116 : 125, "", sum, s->crc[1], s->crc[0]);
+
+ spd_len = (s->info_size_crc >> 4) & 0x7;
+ size = 64 << (s->info_size_crc & 0xf);
+ if (spd_len == 0) {
+ bytes_written = 128;
+ } else if (spd_len == 1) {
+ bytes_written = 176;
+ } else if (spd_len == 2) {
+ bytes_written = 256;
+ } else {
+ size = 64;
+ bytes_written = 64;
+ }
+ printf("%-48s %d\n", "# of bytes written to SDRAM EEPROM", bytes_written);
+ printf("%-48s %d\n", "Total number of bytes in EEPROM", size);
+ printf("%-48s %s\n", "Fundamental Memory type", type_list[s->mem_type]);
+
+ if (s->spd_rev != 0xff)
+ printf("%-48s %x.%x\n", "SPD Revision", s->spd_rev >> 4,
+ s->spd_rev & 0xf);
+
+ printf("%-48s ", "Module Type");
+ if (s->module_type <= ARRAY_SIZE(ddr3_spd_moduletypes))
+ printf("%s\n", ddr3_spd_moduletypes[s->module_type]);
+ else
+ printf("Reserved (0x%02x)\n", s->module_type);
+
+ if ((s->ftb_div & 0x0f) == 0 || s->mtb_divisor == 0) {
+ printf("Invalid time base divisor, can't decode\n");
+ return;
+ }
+
+ printf("\n---=== Memory Characteristics ===---\n");
+
+ ctime = ddr3_timing_from_mtb_ftb(s->tck_min, s->fine_tck_min,
+ s->mtb_dividend, s->mtb_divisor, s->ftb_div);
+ ctime = ddr3_adjust_ctime(ctime, s->ftb_div);
+
+ ddrclk = 2 * 1000 * 1000 / ctime;
+ tbits = 1 << ((s->bus_width & 0x7) + 3);
+ pcclk = ddrclk * tbits / 8;
+ pcclk = pcclk - (pcclk % 100); /* Round down to comply with JEDEC */
+ printf("%-48s %d MT/s (PC3-%d)\n", "Maximum module speed", ddrclk, pcclk);
+
+ cap = (s->density_banks & 0xf) + 28 + (s->bus_width & 0x7) + 3
+ - ((s->organization & 0x7) + 2) - (20 + 3);
+ k = (s->organization >> 3) + 1;
+ printf("%-48s %d MB\n", "Size", (1 << cap) * k);
+
+ printf("%-48s %d x %d x %d x %d\n", "Banks x Rows x Columns x Bits",
+ 1 << (((s->density_banks >> 4) & 0x7) + 3),
+ (((s->addressing >> 3) & 0x1f) + 12),
+ ((s->addressing & 7) + 9),
+ (1 << ((s->bus_width & 0x7) + 3)));
+
+ printf("%-48s %d\n", "Ranks", k);
+
+ printf("%-48s %d bits\n", "SDRAM Device Width",
+ (1 << ((s->organization & 0x7) + 2)));
+
+ printf("%-48s %d bits\n", "Primary Bus Width",
+ (8 << (s->bus_width & 0x7)));
+ if (s->bus_width & 0x18)
+ printf("%-48s %d bits\n", "Bus Width Extension", s->bus_width & 0x18);
+
+ taa = ddr3_timing_from_mtb_ftb(s->taa_min, s->fine_taa_min,
+ s->mtb_dividend, s->mtb_divisor, s->ftb_div);
+ trcd = ddr3_timing_from_mtb_ftb(s->trcd_min, s->fine_trcd_min,
+ s->mtb_dividend, s->mtb_divisor, s->ftb_div);
+ trp = ddr3_timing_from_mtb_ftb(s->trp_min, s->fine_trp_min,
+ s->mtb_dividend, s->mtb_divisor, s->ftb_div);
+ tras = (((s->tras_trc_ext & 0xf) << 8) + s->tras_min_lsb)
+ * 1000 * s->mtb_dividend / s->mtb_divisor;
+
+ printf("%-48s %d-%d-%d-%d\n", "tCL-tRCD-tRP-tRAS",
+ DIV_ROUND_UP(taa, ctime), DIV_ROUND_UP(trcd, ctime),
+ DIV_ROUND_UP(trp, ctime), DIV_ROUND_UP(tras, ctime));
+
+ printf("%-48s", "Supported CAS Latencies (tCL)");
+ cas_sup = (s->caslat_msb << 8) + s->caslat_lsb;
+ for (i = 14; i >= 0; i--) {
+ if (cas_sup & (1 << i))
+ printf(" %dT", i + 4);
+ }
+ printf("\n");
+
+ printf("\n---=== Timings at Standard Speeds ===---\n");
+
+ for (i = 0; i < ARRAY_SIZE(ddr3_std_speeds); i++) {
+ int ctime_at_speed = ddr3_std_speeds[i];
+ int best_cas = 0;
+ int j;
+
+ /* Find min CAS latency at this speed */
+ for (j = 14; j >= 0; j--) {
+ if (!(cas_sup & (1 << j)))
+ continue;
+ if (DIV_ROUND_UP(taa, ctime_at_speed) <= j + 4) {
+ best_cas = j + 4;
+ }
+ }
+
+ if (!best_cas || ctime_at_speed < ctime)
+ continue;
+
+ printf("tCL-tRCD-tRP-tRAS as DDR3-%-4d %17s %d-%d-%d-%d\n",
+ 2000 * 1000 / ctime_at_speed, "", best_cas,
+ DIV_ROUND_UP(trcd, ctime_at_speed),
+ DIV_ROUND_UP(trp, ctime_at_speed),
+ DIV_ROUND_UP(tras, ctime_at_speed));
+ }
+
+ printf("\n---=== Timing Parameters ===---\n");
+
+ printf("%-48s %d.%03d ns\n", "Minimum Cycle Time (tCK)",
+ ctime / 1000, ctime % 1000);
+ printf("%-48s %d.%03d ns\n", "Minimum CAS Latency Time (tAA)",
+ taa / 1000, taa % 1000);
+ twr = s->twr_min * 1000 * s->mtb_dividend / s->mtb_divisor;
+ printf("%-48s %d.%03d ns\n", "Minimum Write Recovery time (tWR)",
+ twr / 1000, twr % 1000);
+ printf("%-48s %d.%03d ns\n", "Minimum RAS# to CAS# Delay (tRCD)",
+ trcd / 1000, trcd % 1000);
+ trrd = s->trrd_min * 1000 * s->mtb_dividend / s->mtb_divisor;
+ printf("%-48s %d.%03d ns\n", "Minimum Row Active to Row Active Delay (tRRD)",
+ trrd / 1000, trrd % 1000);
+ printf("%-48s %d.%03d ns\n", "Minimum Row Precharge Delay (tRP)",
+ trp / 1000, trp % 1000);
+ printf("%-48s %d.%03d ns\n", "Minimum Active to Precharge Delay (tRAS)",
+ tras / 1000, tras % 1000);
+ trc = ddr3_timing_from_mtb_ftb(((s->tras_trc_ext & 0xf0) << 4) + s->trc_min_lsb,
+ s->fine_trc_min, s->mtb_dividend, s->mtb_divisor,
+ s->ftb_div);
+ printf("%-48s %d.%03d ns\n", "Minimum Active to Auto-Refresh Delay (tRC)",
+ trc / 1000, trc % 1000);
+ trfc = ((s->trfc_min_msb << 8) + s->trfc_min_lsb) * 1000
+ * s->mtb_dividend / s->mtb_divisor;
+ printf("%-48s %d.%03d ns\n", "Minimum Recovery Delay (tRFC)",
+ trfc / 1000, trfc % 1000);
+ twtr = s->twtr_min * 1000 * s->mtb_dividend / s->mtb_divisor;
+ printf("%-48s %d.%03d ns\n", "Minimum Write to Read CMD Delay (tWTR)",
+ twtr / 1000, twtr % 1000);
+ trtp = s->trtp_min * 1000 * s->mtb_dividend / s->mtb_divisor;
+ printf("%-48s %d.%03d ns\n", "Minimum Read to Pre-charge CMD Delay (tRTP)",
+ trtp / 1000, trtp % 1000);
+ tfaw = (((s->tfaw_msb & 0xf) << 8) + s->tfaw_min) * 1000
+ * s->mtb_dividend / s->mtb_divisor;
+ printf("%-48s %d.%03d ns\n", "Minimum Four Activate Window Delay (tFAW)",
+ tfaw / 1000, tfaw % 1000);
+
+ printf("\n---=== Optional Features ===---\n");
+
+ printf("%-48s 1.5V%s%s%s\n", "Operable voltages",
+ (s->module_vdd & 0x1) ? " tolerant" : "",
+ (s->module_vdd & 0x2) ? ", 1.35V" : "",
+ (s->module_vdd & 0x4) ? ", 1.2X V" : "");
+ printf("%-48s %s\n", "RZQ/6 supported?",
+ (s->opt_features & 1) ? "Yes" : "No");
+ printf("%-48s %s\n", "RZQ/7 supported?",
+ (s->opt_features & 2) ? "Yes" : "No");
+ printf("%-48s %s\n", "DLL-Off Mode supported?",
+ (s->opt_features & 0x80) ? "Yes" : "No");
+ printf("%-48s 0-%d degrees C\n", "Operating temperature range",
+ (s->therm_ref_opt & 0x1) ? 95 : 85);
+ if (s->therm_ref_opt & 0x1)
+ printf("%-48s %s\n", "Refresh Rate in extended temp range",
+ (s->therm_ref_opt & 0x2) ? "1X" : "2X");
+ printf("%-48s %s\n", "Auto Self-Refresh?",
+ (s->therm_ref_opt & 0x4) ? "Yes" : "No");
+ printf("%-48s %s\n", "On-Die Thermal Sensor readout?",
+ (s->therm_ref_opt & 0x8) ? "Yes" : "No");
+ printf("%-48s %s\n", "Partial Array Self-Refresh?",
+ (s->therm_ref_opt & 0x80) ? "Yes" : "No");
+ printf("%-48s %s\n", "Module Thermal Sensor",
+ (s->therm_sensor & 0x80) ? "Yes" : "No");
+
+ printf("%-48s %s\n", "SDRAM Device Type",
+ (s->device_type & 0x80) ? "Non-Standard" : "Standard Monolithic");
+
+ die_count = (s->device_type >> 4) & 0x7;
+ if (die_count == 1)
+ printf("%-48s Single die\n", "");
+ else if (die_count == 2)
+ printf("%-48s 2 die\n", "");
+ else if (die_count == 3)
+ printf("%-48s 4 die\n", "");
+ else if (die_count == 4)
+ printf("%-48s 8 die\n", "");
+
+ loading = (s->device_type >> 2) & 0x3;
+ if (loading == 1)
+ printf("%-48s Multi load stack\n", "");
+ else if (loading == 2)
+ printf("%-48s Single load stack\n", "");
+
+ mac = s->res_39_59[2] & 0xf;
+ if (mac < ARRAY_SIZE(ddr3_maximum_activated_counts))
+ printf("%-48s %s\n", "Maximum Activate Count (MAC)",
+ ddr3_maximum_activated_counts[mac]);
+
+ /*
+ * The following bytes are type-specific, so don't continue if the type
+ * is unknown.
+ */
+ if (!s->module_type || s->module_type > ARRAY_SIZE(ddr3_spd_moduletypes))
+ return;
+
+ family = ddr3_spd_moduletypes_family[s->module_type];
+ if (family == DDR3_UNBUFFERED || family == DDR3_REGISTERED
+ || family == DDR3_CLOCKED || family == DDR3_LOAD_REDUCED) {
+ printf("\n---=== Physical Characteristics ===---\n");
+ printf("%-48s %d mm\n", "Module Height",
+ ((s->mod_section.unbuffered.mod_height & 0x1f) + 15));
+ printf("%-48s %d mm front, %d mm back\n", "Module Thickness",
+ (s->mod_section.unbuffered.mod_thickness & 0xf) + 1,
+ ((s->mod_section.unbuffered.mod_thickness >> 4) & 0xf) + 1);
+ printf("%-48s %s\n", "Module Width",
+ ddr3_spd_moduletypes_width[s->module_type]);
+ ddr3_print_reference_card(s->mod_section.unbuffered.ref_raw_card,
+ s->mod_section.unbuffered.mod_height);
+ }
+
+ if (family == DDR3_UNBUFFERED)
+ printf("%-48s %s\n", "Rank 1 Mapping",
+ (s->mod_section.unbuffered.addr_mapping) ? "Mirrored" : "Standard");
+
+ if (family == DDR3_REGISTERED) {
+ uint8_t rows = (s->mod_section.registered.modu_attr >> 2) & 0x3;
+ uint8_t registers = s->mod_section.registered.modu_attr & 0x3;
+
+ printf("\n---=== Registered DIMM ===---\n");
+
+ if (!rows)
+ printf("%-48s Undefined\n", "# DRAM Rows");
+ else
+ printf("%-48s %u\n", "# DRAM Rows", 1 << (rows - 1));
+
+ if (!registers)
+ printf("%-48s Undefined\n", "# Registers");
+ else
+ printf("%-48s %u\n", "# Registers", 1 << (registers - 1));
+ printf("%-48s 0x%02x%02x\n", "Register manufacturer ID",
+ s->mod_section.registered.reg_id_hi,
+ s->mod_section.registered.reg_id_lo);
+ printf("%-48s %s\n", "Register device type",
+ (!s->mod_section.registered.reg_type) ? "SSTE32882" : "Undefined");
+ if (s->mod_section.registered.reg_rev != 0xff)
+ ddr3_print_revision_number("Register revision",
+ s->mod_section.registered.reg_rev);
+ printf("%-48s %s\n", "Heat spreader",
+ (s->mod_section.registered.thermal & 0x80) ? "Yes" : "No");
+ }
+
+ if (family == DDR3_LOAD_REDUCED) {
+ uint8_t modu_attr = s->mod_section.loadreduced.modu_attr;
+ uint8_t rows = (modu_attr >> 2) & 0x3;
+ static const char *mirroring[] = {
+ "None", "Odd ranks", "Reserved", "Reserved"
+ };
+
+ printf("\n---=== Load Reduced DIMM ===---\n");
+
+ if (!rows)
+ printf("%-48s Undefined\n", "# DRAM Rows");
+ else if (rows == 0x3)
+ printf("%-48s Reserved\n", "# DRAM Rows");
+ else
+ printf("%-48s %u\n", "# DRAM Rows", 1 << (rows - 1));
+
+ printf("%-48s %s\n", "Mirroring",
+ mirroring[modu_attr & 0x3]);
+
+ printf("%-48s %s\n", "Rank Numbering",
+ (modu_attr & 0x20) ? "Even only" : "Contiguous");
+ printf("%-48s %s\n", "Buffer Orientation",
+ (modu_attr & 0x10) ? "Horizontal" : "Vertical");
+ printf("%-48s 0x%02x%02x\n", "Register Manufacturer ID",
+ s->mod_section.loadreduced.buf_id_hi,
+ s->mod_section.loadreduced.buf_id_lo);
+ if (s->mod_section.loadreduced.buf_rev_id != 0xff)
+ ddr3_print_revision_number("Buffer Revision",
+ s->mod_section.loadreduced.buf_rev_id);
+ printf("%-48s %s\n", "Heat spreader",
+ (s->mod_section.loadreduced.modu_attr & 0x80) ? "Yes" : "No");
+ }
+
+ printf("\n---=== Manufacturer Data ===---\n");
+
+ printf("%-48s 0x%02x%02x\n", "Module Manufacturer ID",
+ s->mmid_msb, s->mmid_lsb);
+
+ if (!((s->dmid_lsb == 0xff) && (s->dmid_msb == 0xff))
+ && !((s->dmid_lsb == 0x0) && (s->dmid_msb == 0x0)))
+ printf("%-48s 0x%02x%02x\n", "DRAM Manufacturer ID",
+ s->dmid_msb, s->dmid_lsb);
+
+ if (!(s->mloc == 0xff) && !(s->mloc == 0x0))
+ printf("%-48s 0x%02x\n", "Manufacturing Location Code",
+ s->mloc);
+
+ if (!((s->mdate[0] == 0xff) && (s->mdate[1] == 0xff))
+ && !((s->mdate[0] == 0x0) && (s->mdate[1] == 0x0)))
+ spd_print_manufacturing_date(s->mdate[0], s->mdate[1]);
+
+ if ((s->sernum[0] != s->sernum[1])
+ && (s->sernum[0] != s->sernum[2])
+ && (s->sernum[1] != s->sernum[3])
+ && ((s->sernum[0] != 0xff) || (s->sernum[0] != 0x0)))
+ printf("%-48s 0x%02X%02X%02X%02X\n", "Assembly Serial Number",
+ s->sernum[0], s->sernum[1], s->sernum[2], s->sernum[3]);
+
+ printf("%-48s ", "Part Number");
+ if (!(s->mpart[0] >= 32 && s->mpart[0] < 127)) {
+ printf("Undefined\n");
+ } else {
+ for (i = 0; i < ARRAY_SIZE(s->mpart); i++) {
+ if (s->mpart[i] >= 32 && s->mpart[i] < 127)
+ printf("%c", s->mpart[i]);
+ else
+ break;
+ }
+ printf("\n");
+ }
+
+ if (!((s->mrev[0] == 0xff) && (s->mrev[1] == 0xff))
+ && !((s->mrev[0] == 0x0) && (s->mrev[1] == 0x0)))
+ printf("%-48s 0x%02X%02X\n", "Revision Code", s->mrev[0], s->mrev[1]);
+}
+
+void ddr_spd_print(uint8_t *record)
+{
+ uint8_t mem_type = record[2];
+
+ switch (mem_type) {
+ case SPD_MEMTYPE_DDR2:
+ ddr2_spd_print(record);
+ break;
+ case SPD_MEMTYPE_DDR3:
+ ddr3_spd_print(record);
+ break;
+ default:
+ printf("Can only dump SPD information for DDR2 and DDR3 memory types\n");
+ }
+}
+
#define SPD_SPA0_ADDRESS 0x36
#define SPD_SPA1_ADDRESS 0x37
-static int select_page(void *ctx,
- int (*xfer)(void *ctx, struct i2c_msg *msgs, int num),
- uint8_t addr)
+static int select_page(struct pbl_i2c *i2c, uint8_t addr)
{
struct i2c_msg msg = {
.addr = addr,
@@ -440,15 +979,14 @@ static int select_page(void *ctx,
};
int ret;
- ret = xfer(ctx, &msg, 1);
+ ret = pbl_i2c_xfer(i2c, &msg, 1);
if (ret < 0)
return ret;
return 0;
}
-static int read_buf(void *ctx,
- int (*xfer)(void *ctx, struct i2c_msg *msgs, int num),
+static int read_buf(struct pbl_i2c *i2c,
uint8_t addr, int page, void *buf)
{
uint8_t pos = 0;
@@ -466,11 +1004,11 @@ static int read_buf(void *ctx,
}
};
- ret = select_page(ctx, xfer, page);
+ ret = select_page(i2c, page);
if (ret < 0)
return ret;
- ret = xfer(ctx, msg, 2);
+ ret = pbl_i2c_xfer(i2c, msg, 2);
if (ret < 0)
return ret;
@@ -479,29 +1017,32 @@ static int read_buf(void *ctx,
/**
* spd_read_eeprom - Read contents of a SPD EEPROM
- * @ctx: Context pointer for the xfer function
- * @xfer: I2C message transfer function
+ * @i2c: I2C controller handle
* @addr: I2C bus address for the EEPROM
* @buf: buffer to read the SPD data to
+ * @memtype: Memory type, such as SPD_MEMTYPE_DDR4
*
* This function takes a I2C message transfer function and reads the contents
* from a SPD EEPROM to the buffer provided at @buf. The buffer should at least
* have a size of 512 bytes. Returns 0 for success or a negative error code
* otherwise.
*/
-int spd_read_eeprom(void *ctx,
- int (*xfer)(void *ctx, struct i2c_msg *msgs, int num),
- uint8_t addr, void *buf)
+int spd_read_eeprom(struct pbl_i2c *i2c,
+ uint8_t addr, void *buf,
+ int memtype)
{
- unsigned char *buf8 = buf;
int ret;
- ret = read_buf(ctx, xfer, addr, SPD_SPA0_ADDRESS, buf);
- if (ret < 0)
- return ret;
+ if (memtype == SPD_MEMTYPE_DDR4) {
+ ret = read_buf(i2c, addr, SPD_SPA0_ADDRESS, buf);
+ if (ret < 0)
+ return ret;
- if (buf8[2] == SPD_MEMTYPE_DDR4) {
- ret = read_buf(ctx, xfer, addr, SPD_SPA1_ADDRESS, buf + 256);
+ ret = read_buf(i2c, addr, SPD_SPA1_ADDRESS, buf + 256);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = read_buf(i2c, addr, 0, buf);
if (ret < 0)
return ret;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-23 08:33:20 +0000