diff options
Diffstat (limited to 'drivers/ddr/imx8m/ddr_init.c')
| -rw-r--r-- | drivers/ddr/imx8m/ddr_init.c | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/drivers/ddr/imx8m/ddr_init.c b/drivers/ddr/imx8m/ddr_init.c new file mode 100644 index 0000000000..374601b786 --- /dev/null +++ b/drivers/ddr/imx8m/ddr_init.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 NXP + */ +#define DEBUG +#include <common.h> +#include <errno.h> +#include <io.h> +#include <soc/imx8m/ddr.h> +#include <mach/generic.h> +#include <mach/imx8m-regs.h> +#include <mach/imx8m-ccm-regs.h> + +#define SRC_DDRC_RCR_ADDR MX8MQ_SRC_DDRC_RCR_ADDR + +static void ddr_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num) +{ + int i = 0; + + for (i = 0; i < num; i++) { + reg32_write((unsigned long)ddrc_cfg->reg, ddrc_cfg->val); + ddrc_cfg++; + } +} + +static int imx8m_ddr_init(unsigned long src_ddrc_rcr, + struct dram_timing_info *dram_timing) +{ + unsigned int tmp, initial_drate, target_freq; + int ret; + + debug("DDRINFO: start DRAM init\n"); + + debug("DDRINFO: cfg clk\n"); + + /* disable iso */ + reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */ + reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */ + + initial_drate = dram_timing->fsp_msg[0].drate; + /* default to the frequency point 0 clock */ + ddrphy_init_set_dfi_clk(initial_drate); + + /* D-aasert the presetn */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006); + + /* Step2: Program the dwc_ddr_umctl2 registers */ + debug("DDRINFO: ddrc config start\n"); + ddr_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num); + debug("DDRINFO: ddrc config done\n"); + + /* Step3: De-assert reset signal(core_ddrc_rstn & aresetn_n) */ + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004); + reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000); + + /* + * Step4: Disable auto-refreshes, self-refresh, powerdown, and + * assertion of dfi_dram_clk_disable by setting RFSHCTL3.dis_auto_refresh = 1, + * PWRCTL.powerdown_en = 0, and PWRCTL.selfref_en = 0, + * PWRCTL.en_dfi_dram_clk_disable = 0 + */ + reg32_write(DDRC_DBG1(0), 0x00000000); + reg32_write(DDRC_RFSHCTL3(0), 0x0000001); + reg32_write(DDRC_PWRCTL(0), 0xa0); + + /* if ddr type is LPDDR4, do it */ + tmp = reg32_read(DDRC_MSTR(0)); + if (tmp & (0x1 << 5)) + reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */ + + /* determine the initial boot frequency */ + target_freq = reg32_read(DDRC_MSTR2(0)) & 0x3; + target_freq = (tmp & (0x1 << 29)) ? target_freq : 0x0; + + /* Step5: Set SWCT.sw_done to 0 */ + reg32_write(DDRC_SWCTL(0), 0x00000000); + + /* Set the default boot frequency point */ + clrsetbits_le32(DDRC_DFIMISC(0), (0x1f << 8), target_freq << 8); + /* Step6: Set DFIMISC.dfi_init_complete_en to 0 */ + clrbits_le32(DDRC_DFIMISC(0), 0x1); + + /* Step7: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + do { + tmp = reg32_read(DDRC_SWSTAT(0)); + } while ((tmp & 0x1) == 0x0); + + /* + * Step8 ~ Step13: Start PHY initialization and training by + * accessing relevant PUB registers + */ + debug("DDRINFO:ddrphy config start\n"); + + ret = ddr_cfg_phy(dram_timing); + if (ret) + return ret; + + debug("DDRINFO: ddrphy config done\n"); + + /* + * step14 CalBusy.0 =1, indicates the calibrator is actively + * calibrating. Wait Calibrating done. + */ + do { + tmp = reg32_read(DDRPHY_CalBusy(0)); + } while ((tmp & 0x1)); + + debug("DDRINFO:ddrphy calibration done\n"); + + /* Step15: Set SWCTL.sw_done to 0 */ + reg32_write(DDRC_SWCTL(0), 0x00000000); + + /* Step16: Set DFIMISC.dfi_init_start to 1 */ + setbits_le32(DDRC_DFIMISC(0), (0x1 << 5)); + + /* Step17: Set SWCTL.sw_done to 1; need to polling SWSTAT.sw_done_ack */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + do { + tmp = reg32_read(DDRC_SWSTAT(0)); + } while ((tmp & 0x1) == 0x0); + + /* Step18: Polling DFISTAT.dfi_init_complete = 1 */ + do { + tmp = reg32_read(DDRC_DFISTAT(0)); + } while ((tmp & 0x1) == 0x0); + + /* Step19: Set SWCTL.sw_done to 0 */ + reg32_write(DDRC_SWCTL(0), 0x00000000); + + /* Step20: Set DFIMISC.dfi_init_start to 0 */ + clrbits_le32(DDRC_DFIMISC(0), (0x1 << 5)); + + /* Step21: optional */ + + /* Step22: Set DFIMISC.dfi_init_complete_en to 1 */ + setbits_le32(DDRC_DFIMISC(0), 0x1); + + /* Step23: Set PWRCTL.selfref_sw to 0 */ + clrbits_le32(DDRC_PWRCTL(0), (0x1 << 5)); + + /* Step24: Set SWCTL.sw_done to 1; need polling SWSTAT.sw_done_ack */ + reg32_write(DDRC_SWCTL(0), 0x00000001); + do { + tmp = reg32_read(DDRC_SWSTAT(0)); + } while ((tmp & 0x1) == 0x0); + + /* Step25: Wait for dwc_ddr_umctl2 to move to normal operating mode by monitoring + * STAT.operating_mode signal */ + do { + tmp = reg32_read(DDRC_STAT(0)); + } while ((tmp & 0x3) != 0x1); + + /* Step26: Set back register in Step4 to the original values if desired */ + reg32_write(DDRC_RFSHCTL3(0), 0x0000000); + /* enable selfref_en by default */ + setbits_le32(DDRC_PWRCTL(0), 0x1 << 3); + + /* enable port 0 */ + reg32_write(DDRC_PCTRL_0(0), 0x00000001); + debug("DDRINFO: ddrmix config done\n"); + + return 0; +} + +/* + * We store the timing parameters here. the TF-A will pick these up. + * Note that the timing used we leave the driver with is a PLL bypass 25MHz + * mode. So if your board runs horribly slow you'll likely have to provide a + * TF-A binary. + */ +#define IMX8M_SAVED_DRAM_TIMING_BASE 0x180000 + +int imx8mm_ddr_init(struct dram_timing_info *dram_timing) +{ + unsigned long src_ddrc_rcr = MX8M_SRC_DDRC_RCR_ADDR; + int ret; + + /* Step1: Follow the power up procedure */ + reg32_write(src_ddrc_rcr, 0x8f00001f); + reg32_write(src_ddrc_rcr, 0x8f00000f); + + ret = imx8m_ddr_init(src_ddrc_rcr, dram_timing); + if (ret) + return ret; + + /* save the dram timing config into memory */ + dram_config_save(dram_timing, IMX8M_SAVED_DRAM_TIMING_BASE); + + return 0; +} + +int imx8mq_ddr_init(struct dram_timing_info *dram_timing) +{ + unsigned long src_ddrc_rcr = MX8MQ_SRC_DDRC_RCR_ADDR; + int ret; + + /* Step1: Follow the power up procedure */ + reg32_write(src_ddrc_rcr + 0x04, 0x8f00000f); + reg32_write(src_ddrc_rcr, 0x8f00000f); + reg32_write(src_ddrc_rcr + 0x04, 0x8f000000); + + ret = imx8m_ddr_init(src_ddrc_rcr, dram_timing); + if (ret) + return ret; + + /* save the dram timing config into memory */ + dram_config_save(dram_timing, IMX8M_SAVED_DRAM_TIMING_BASE); + + return 0; +} |