summaryrefslogtreecommitdiffstats
path: root/drivers/mci/atmel_mci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mci/atmel_mci.c')
-rw-r--r--drivers/mci/atmel_mci.c530
1 files changed, 34 insertions, 496 deletions
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 0d3b245ced..9021dba0f8 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -1,477 +1,37 @@
-/*
- * Atmel MCI driver
- *
- * Copyright (C) 2011 Hubert Feurstein <h.feurstein@gmail.com>
- *
- * based on imx.c by:
- * Copyright (C) 2009 Ilya Yanok, <yanok@emcraft.com>
- * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2011 Hubert Feurstein <h.feurstein@gmail.com>
+// SPDX-FileCopyrightText: 2009 Ilya Yanok <yanok@emcraft.com>
+// SPDX-FileCopyrightText: 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+// SPDX-FileCopyrightText: 2006 Pavel Pisa <ppisa@pikron.com>, PiKRON
+
+/* Atmel MCI driver */
#include <common.h>
-#include <init.h>
-#include <mci.h>
-#include <errno.h>
-#include <clock.h>
#include <gpio.h>
-#include <io.h>
-#include <mach/board.h>
#include <linux/clk.h>
-#include <linux/err.h>
+#include <mci.h>
#include <of_gpio.h>
+#include <platform_data/atmel-mci.h>
#include "atmel-mci-regs.h"
-struct atmel_mci_caps {
- bool has_cfg_reg;
- bool has_highspeed;
- bool has_rwproof;
- bool has_odd_clk_div;
- bool need_reset_after_xfer;
-};
-
-struct atmel_mci {
- struct mci_host mci;
- void __iomem *regs;
- struct device_d *hw_dev;
- struct clk *clk;
-
- u32 datasize;
- struct mci_cmd *cmd;
- struct mci_data *data;
- unsigned slot_b;
- int version;
- struct atmel_mci_caps caps;
-
- unsigned long bus_hz;
- u32 mode_reg;
- u32 cfg_reg;
- u32 sdc_reg;
- bool need_reset;
- int detect_pin;
-};
-
-#define to_mci_host(mci) container_of(mci, struct atmel_mci, mci)
-
-#define STATUS_ERROR_MASK (ATMCI_RINDE \
- | ATMCI_RDIRE \
- | ATMCI_RCRCE \
- | ATMCI_RENDE \
- | ATMCI_RTOE \
- | ATMCI_DCRCE \
- | ATMCI_DTOE \
- | ATMCI_OVRE \
- | ATMCI_UNRE)
-
-static void atmci_set_clk_rate(struct atmel_mci *host,
- unsigned int clock_min)
-{
- unsigned int clkdiv;
-
- if (!host->mode_reg) {
- clk_enable(host->clk);
- atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
- if (host->caps.has_cfg_reg)
- atmci_writel(host, ATMCI_CFG, host->cfg_reg);
- }
-
- if (host->caps.has_odd_clk_div) {
- clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
- if (clkdiv > 511) {
- dev_dbg(host->hw_dev,
- "clock %u too slow; using %lu\n",
- clock_min, host->bus_hz / (511 + 2));
- clkdiv = 511;
- }
- host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
- | ATMCI_MR_CLKODD(clkdiv & 1);
- } else {
- clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
- if (clkdiv > 255) {
- dev_dbg(host->hw_dev,
- "clock %u too slow; using %lu\n",
- clock_min, host->bus_hz / (2 * 256));
- clkdiv = 255;
- }
- host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
- }
-
- dev_dbg(host->hw_dev, "atmel_set_clk_rate: clkIn=%ld clkIos=%d divider=%d\n",
- host->bus_hz, clock_min, clkdiv);
-
- /*
- * WRPROOF and RDPROOF prevent overruns/underruns by
- * stopping the clock when the FIFO is full/empty.
- * This state is not expected to last for long.
- */
- if (host->caps.has_rwproof)
- host->mode_reg |= ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF;
-
- atmci_writel(host, ATMCI_MR, host->mode_reg);
-}
-
-static int atmci_poll_status(struct atmel_mci *host, u32 mask)
-{
- u32 stat;
- uint64_t start = get_time_ns();
-
- do {
- stat = atmci_readl(host, ATMCI_SR);
- if (stat & STATUS_ERROR_MASK)
- return stat;
- if (is_timeout(start, SECOND)) {
- dev_err(host->hw_dev, "timeout\n");
- host->need_reset = true;
- return ATMCI_RTOE | stat;
- }
- if (stat & mask)
- return 0;
- } while (1);
-}
-
-static int atmci_pull(struct atmel_mci *host, void *_buf, int bytes)
-{
- unsigned int stat;
- u32 *buf = _buf;
-
- while (bytes > 3) {
- stat = atmci_poll_status(host, ATMCI_RXRDY);
- if (stat)
- return stat;
-
- *buf++ = atmci_readl(host, ATMCI_RDR);
- bytes -= 4;
- }
-
- if (WARN_ON(bytes))
- return -EIO;
-
- return 0;
-}
-
-#ifdef CONFIG_MCI_WRITE
-static int atmci_push(struct atmel_mci *host, const void *_buf, int bytes)
-{
- unsigned int stat;
- const u32 *buf = _buf;
-
- while (bytes > 3) {
- stat = atmci_poll_status(host, ATMCI_TXRDY);
- if (stat)
- return stat;
-
- atmci_writel(host, ATMCI_TDR, *buf++);
- bytes -= 4;
- }
-
- stat = atmci_poll_status(host, ATMCI_TXRDY);
- if (stat)
- return stat;
-
- if (WARN_ON(bytes))
- return -EIO;
-
- return 0;
-}
-#endif /* CONFIG_MCI_WRITE */
-
-static int atmci_transfer_data(struct atmel_mci *host)
-{
- struct mci_data *data = host->data;
- int stat;
- unsigned long length;
-
- length = data->blocks * data->blocksize;
- host->datasize = 0;
-
- if (data->flags & MMC_DATA_READ) {
- stat = atmci_pull(host, data->dest, length);
- if (stat)
- return stat;
-
- stat = atmci_poll_status(host, ATMCI_NOTBUSY);
- if (stat)
- return stat;
-
- host->datasize += length;
- } else {
-#ifdef CONFIG_MCI_WRITE
- stat = atmci_push(host, (const void *)(data->src), length);
- if (stat)
- return stat;
-
- host->datasize += length;
- stat = atmci_poll_status(host, ATMCI_NOTBUSY);
- if (stat)
- return stat;
-#endif /* CONFIG_MCI_WRITE */
- }
- return 0;
-}
-
-static void atmci_finish_request(struct atmel_mci *host)
-{
- host->cmd = NULL;
- host->data = NULL;
-}
-
-static int atmci_finish_data(struct atmel_mci *host, unsigned int stat)
-{
- int data_error = 0;
-
- if (stat & STATUS_ERROR_MASK) {
- dev_err(host->hw_dev, "request failed (status=0x%08x)\n", stat);
- if (stat & ATMCI_DCRCE)
- data_error = -EILSEQ;
- else if (stat & (ATMCI_RTOE | ATMCI_DTOE))
- data_error = -ETIMEDOUT;
- else
- data_error = -EIO;
- }
-
- host->data = NULL;
-
- return data_error;
-}
-
-static void atmci_setup_data(struct atmel_mci *host, struct mci_data *data)
-{
- unsigned int nob = data->blocks;
- unsigned int blksz = data->blocksize;
- unsigned int datasize = nob * blksz;
-
- BUG_ON(data->blocksize & 3);
- BUG_ON(nob == 0);
-
- host->data = data;
-
- dev_dbg(host->hw_dev, "atmel_setup_data: nob=%d blksz=%d\n",
- nob, blksz);
-
- atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(nob)
- | ATMCI_BLKLEN(blksz));
-
- host->datasize = datasize;
-}
-
-static int atmci_read_response(struct atmel_mci *host, unsigned int stat)
-{
- struct mci_cmd *cmd = host->cmd;
- int i;
- u32 *resp;
-
- if (!cmd)
- return 0;
-
- resp = (u32 *)cmd->response;
-
- if (stat & (ATMCI_RTOE | ATMCI_DTOE)) {
- dev_err(host->hw_dev, "command/data timeout\n");
- return -ETIMEDOUT;
- } else if ((stat & ATMCI_RCRCE) && (cmd->resp_type & MMC_RSP_CRC)) {
- dev_err(host->hw_dev, "cmd crc error\n");
- return -EILSEQ;
- }
-
- if (cmd->resp_type & MMC_RSP_PRESENT) {
- if (cmd->resp_type & MMC_RSP_136) {
- for (i = 0; i < 4; i++)
- resp[i] = atmci_readl(host, ATMCI_RSPR);
- } else {
- resp[0] = atmci_readl(host, ATMCI_RSPR);
- }
- }
-
- return 0;
-}
-
-static int atmci_cmd_done(struct atmel_mci *host, unsigned int stat)
-{
- int datastat;
- int ret;
-
- ret = atmci_read_response(host, stat);
-
- if (ret) {
- atmci_finish_request(host);
- return ret;
- }
-
- if (!host->data) {
- atmci_finish_request(host);
- return 0;
- }
-
- datastat = atmci_transfer_data(host);
- ret = atmci_finish_data(host, datastat);
- atmci_finish_request(host);
- return ret;
-}
-
-static int atmci_start_cmd(struct atmel_mci *host, struct mci_cmd *cmd,
- unsigned int cmdat)
-{
- unsigned flags = 0;
- unsigned cmdval = 0;
-
- if (host->cmd != NULL)
- dev_err(host->hw_dev, "error!\n");
-
- if ((atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY) == 0) {
- dev_err(host->hw_dev, "mci not ready!\n");
- return -EBUSY;
- }
-
- host->cmd = cmd;
- cmdval = ATMCI_CMDR_CMDNB_MASK & cmd->cmdidx;
-
- switch (cmd->resp_type) {
- case MMC_RSP_R1: /* short CRC, OPCODE */
- case MMC_RSP_R1b:/* short CRC, OPCODE, BUSY */
- flags |= ATMCI_CMDR_RSPTYP_48BIT;
- break;
- case MMC_RSP_R2: /* long 136 bit + CRC */
- flags |= ATMCI_CMDR_RSPTYP_136BIT;
- break;
- case MMC_RSP_R3: /* short */
- flags |= ATMCI_CMDR_RSPTYP_48BIT;
- break;
- case MMC_RSP_NONE:
- flags |= ATMCI_CMDR_RSPTYP_NONE;
- break;
- default:
- dev_err(host->hw_dev, "unhandled response type 0x%x\n",
- cmd->resp_type);
- return -EINVAL;
- }
- cmdval |= ATMCI_CMDR_RSPTYP & flags;
- cmdval |= cmdat & ~(ATMCI_CMDR_CMDNB_MASK | ATMCI_CMDR_RSPTYP);
-
- atmci_writel(host, ATMCI_ARGR, cmd->cmdarg);
- atmci_writel(host, ATMCI_CMDR, cmdval);
-
- return 0;
-}
-
-static int atmci_card_present(struct mci_host *mci)
-{
- struct atmel_mci *host = to_mci_host(mci);
- int ret;
-
- /* No gpio, assume card is present */
- if (!gpio_is_valid(host->detect_pin))
- return 1;
-
- ret = gpio_get_value(host->detect_pin);
-
- return ret == 0 ? 1 : 0;
-}
-
-/** init the host interface */
-static int atmci_reset(struct mci_host *mci, struct device_d *mci_dev)
-{
- struct atmel_mci *host = to_mci_host(mci);
-
- clk_enable(host->clk);
- atmci_writel(host, ATMCI_DTOR, 0x7f);
- clk_disable(host->clk);
-
- return 0;
-}
-
/** change host interface settings */
static void atmci_set_ios(struct mci_host *mci, struct mci_ios *ios)
{
struct atmel_mci *host = to_mci_host(mci);
- dev_dbg(host->hw_dev, "atmel_mci_set_ios: bus_width=%d clk=%d\n",
- ios->bus_width, ios->clock);
-
- host->sdc_reg &= ~ATMCI_SDCBUS_MASK;
- switch (ios->bus_width) {
- case MMC_BUS_WIDTH_4:
- host->sdc_reg |= ATMCI_SDCBUS_4BIT;
- break;
- case MMC_BUS_WIDTH_8:
- host->sdc_reg |= ATMCI_SDCBUS_8BIT;
- break;
- case MMC_BUS_WIDTH_1:
- host->sdc_reg |= ATMCI_SDCBUS_1BIT;
- break;
- default:
- return;
- }
-
- if (ios->clock) {
- atmci_set_clk_rate(host, ios->clock);
-
- if (host->caps.has_cfg_reg) {
- /* setup High Speed mode in relation with card capacity */
- if (ios->timing == MMC_TIMING_SD_HS)
- host->cfg_reg |= ATMCI_CFG_HSMODE;
- else
- host->cfg_reg &= ~ATMCI_CFG_HSMODE;
-
- atmci_writel(host, ATMCI_CFG, host->cfg_reg);
- }
- } else {
- atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
- if (host->mode_reg) {
- atmci_readl(host, ATMCI_MR);
- clk_disable(host->clk);
- }
- host->mode_reg = 0;
- }
-
- return;
+ atmci_common_set_ios(host, ios);
}
-/** handle a command */
-static int atmci_request(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
+static int atmci_send_cmd(struct mci_host *mci, struct mci_cmd *cmd,
+ struct mci_data *data)
{
struct atmel_mci *host = to_mci_host(mci);
- u32 stat, cmdat = 0;
- int ret;
-
- if (host->need_reset || host->caps.need_reset_after_xfer) {
- atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
- atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
- atmci_writel(host, ATMCI_MR, host->mode_reg);
- if (host->caps.has_cfg_reg)
- atmci_writel(host, ATMCI_CFG, host->cfg_reg);
- host->need_reset = false;
- }
- atmci_writel(host, ATMCI_SDCR, host->sdc_reg);
- if (cmd->resp_type != MMC_RSP_NONE)
- cmdat |= ATMCI_CMDR_MAXLAT_64CYC;
-
- if (data) {
- atmci_setup_data(host, data);
-
- cmdat |= ATMCI_CMDR_START_XFER | ATMCI_CMDR_MULTI_BLOCK;
-
- if (data->flags & MMC_DATA_READ)
- cmdat |= ATMCI_CMDR_TRDIR_READ;
- }
-
- ret = atmci_start_cmd(host, cmd, cmdat);
- if (ret) {
- atmci_finish_request(host);
- return ret;
- }
-
- stat = atmci_poll_status(host, ATMCI_CMDRDY);
- return atmci_cmd_done(host, stat);
+ return atmci_common_request(host, cmd, data);
}
-static void atmci_info(struct device_d *mci_dev)
+static void atmci_info(struct device *mci_dev)
{
struct atmel_mci *host = mci_dev->priv;
@@ -492,55 +52,31 @@ static void atmci_info(struct device_d *mci_dev)
gpio_is_valid(host->detect_pin) ? "yes" : "no");
}
-/*
- * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
- * HSMCI provides DMA support and a new config register but no more supports
- * PDC.
- */
-static void atmci_get_cap(struct atmel_mci *host)
+
+static int atmci_card_present(struct mci_host *mci)
{
- unsigned int version;
-
- version = atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
- host->version = version;
-
- dev_info(host->hw_dev, "version: 0x%x\n", version);
-
- host->caps.has_cfg_reg = 0;
- host->caps.has_highspeed = 0;
- host->caps.need_reset_after_xfer = 1;
-
- switch (version & 0xf00) {
- case 0x600:
- case 0x500:
- host->caps.has_odd_clk_div = 1;
- case 0x400:
- case 0x300:
- host->caps.has_cfg_reg = 1;
- host->caps.has_highspeed = 1;
- case 0x200:
- host->caps.has_rwproof = 1;
- case 0x100:
- host->caps.need_reset_after_xfer = 0;
- case 0x0:
- break;
- default:
- dev_warn(host->hw_dev,
- "Unmanaged mci version, set minimum capabilities\n");
- break;
- }
+ struct atmel_mci *host = to_mci_host(mci);
+ int ret;
+
+ /* No gpio, assume card is present */
+ if (!gpio_is_valid(host->detect_pin))
+ return 1;
+
+ ret = gpio_get_value(host->detect_pin);
+
+ return ret == 0 ? 1 : 0;
}
-static int atmci_probe(struct device_d *hw_dev)
+static int atmci_probe(struct device *hw_dev)
{
struct resource *iores;
struct atmel_mci *host;
- struct device_node *np = hw_dev->device_node;
+ struct device_node *np = hw_dev->of_node;
struct atmel_mci_platform_data *pd = hw_dev->platform_data;
int ret;
host = xzalloc(sizeof(*host));
- host->mci.send_cmd = atmci_request;
+ host->mci.send_cmd = atmci_send_cmd;
host->mci.set_ios = atmci_set_ios;
host->mci.init = atmci_reset;
host->mci.card_present = atmci_card_present;
@@ -569,8 +105,8 @@ static int atmci_probe(struct device_d *hw_dev)
for_each_child_of_node(np, cnp) {
if (of_property_read_u32(cnp, "reg", &slot_id)) {
- dev_warn(hw_dev, "reg property is missing for %s\n",
- cnp->full_name);
+ dev_warn(hw_dev, "reg property is missing for %pOF\n",
+ cnp);
continue;
}
@@ -615,6 +151,7 @@ static int atmci_probe(struct device_d *hw_dev)
clk_enable(host->clk);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_PWSDIS);
atmci_writel(host, ATMCI_IDR, ~0UL);
host->bus_hz = clk_get_rate(host->clk);
clk_disable(host->clk);
@@ -657,8 +194,9 @@ static __maybe_unused struct of_device_id atmci_compatible[] = {
/* sentinel */
}
};
+MODULE_DEVICE_TABLE(of, atmci_compatible);
-static struct driver_d atmci_driver = {
+static struct driver atmci_driver = {
.name = "atmel_mci",
.probe = atmci_probe,
.of_compatible = DRV_OF_COMPAT(atmci_compatible),