diff options
Diffstat (limited to 'drivers/mtd/nand/atmel_nand_ecc.h')
| -rw-r--r-- | drivers/mtd/nand/atmel_nand_ecc.h | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h deleted file mode 100644 index e39aada36b..0000000000 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Error Corrected Code Controller (ECC) - System peripherals regsters. - * Based on AT91SAM9260 datasheet revision B. - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 - 2012 Atmel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef ATMEL_NAND_ECC_H -#define ATMEL_NAND_ECC_H - -#define ATMEL_ECC_CR 0x00 /* Control register */ -#define ATMEL_ECC_RST (1 << 0) /* Reset parity */ - -#define ATMEL_ECC_MR 0x04 /* Mode register */ -#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */ -#define ATMEL_ECC_PAGESIZE_528 (0) -#define ATMEL_ECC_PAGESIZE_1056 (1) -#define ATMEL_ECC_PAGESIZE_2112 (2) -#define ATMEL_ECC_PAGESIZE_4224 (3) - -#define ATMEL_ECC_SR 0x08 /* Status register */ -#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */ -#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ -#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */ - -#define ATMEL_ECC_PR 0x0c /* Parity register */ -#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */ -#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ - -#define ATMEL_ECC_NPR 0x10 /* NParity register */ -#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */ - -/* PMECC Register Definitions */ -#define ATMEL_PMECC_CFG 0x000 /* Configuration Register */ -#define PMECC_CFG_BCH_ERR2 (0 << 0) -#define PMECC_CFG_BCH_ERR4 (1 << 0) -#define PMECC_CFG_BCH_ERR8 (2 << 0) -#define PMECC_CFG_BCH_ERR12 (3 << 0) -#define PMECC_CFG_BCH_ERR24 (4 << 0) - -#define PMECC_CFG_SECTOR512 (0 << 4) -#define PMECC_CFG_SECTOR1024 (1 << 4) - -#define PMECC_CFG_PAGE_1SECTOR (0 << 8) -#define PMECC_CFG_PAGE_2SECTORS (1 << 8) -#define PMECC_CFG_PAGE_4SECTORS (2 << 8) -#define PMECC_CFG_PAGE_8SECTORS (3 << 8) - -#define PMECC_CFG_READ_OP (0 << 12) -#define PMECC_CFG_WRITE_OP (1 << 12) - -#define PMECC_CFG_SPARE_ENABLE (1 << 16) -#define PMECC_CFG_SPARE_DISABLE (0 << 16) - -#define PMECC_CFG_AUTO_ENABLE (1 << 20) -#define PMECC_CFG_AUTO_DISABLE (0 << 20) - -#define ATMEL_PMECC_SAREA 0x004 /* Spare area size */ -#define ATMEL_PMECC_SADDR 0x008 /* PMECC starting address */ -#define ATMEL_PMECC_EADDR 0x00c /* PMECC ending address */ -#define ATMEL_PMECC_CLK 0x010 /* PMECC clock control */ -#define PMECC_CLK_133MHZ (2 << 0) - -#define ATMEL_PMECC_CTRL 0x014 /* PMECC control register */ -#define PMECC_CTRL_RST (1 << 0) -#define PMECC_CTRL_DATA (1 << 1) -#define PMECC_CTRL_USER (1 << 2) -#define PMECC_CTRL_ENABLE (1 << 4) -#define PMECC_CTRL_DISABLE (1 << 5) - -#define ATMEL_PMECC_SR 0x018 /* PMECC status register */ -#define PMECC_SR_BUSY (1 << 0) -#define PMECC_SR_ENABLE (1 << 4) - -#define ATMEL_PMECC_IER 0x01c /* PMECC interrupt enable */ -#define PMECC_IER_ENABLE (1 << 0) -#define ATMEL_PMECC_IDR 0x020 /* PMECC interrupt disable */ -#define PMECC_IER_DISABLE (1 << 0) -#define ATMEL_PMECC_IMR 0x024 /* PMECC interrupt mask */ -#define PMECC_IER_MASK (1 << 0) -#define ATMEL_PMECC_ISR 0x028 /* PMECC interrupt status */ -#define ATMEL_PMECC_ECCx 0x040 /* PMECC ECC x */ -#define ATMEL_PMECC_REMx 0x240 /* PMECC REM x */ - -/* PMERRLOC Register Definitions */ -#define ATMEL_PMERRLOC_ELCFG 0x000 /* Error location config */ -#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0) -#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0) -#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16) - -#define ATMEL_PMERRLOC_ELPRIM 0x004 /* Error location primitive */ -#define ATMEL_PMERRLOC_ELEN 0x008 /* Error location enable */ -#define ATMEL_PMERRLOC_ELDIS 0x00c /* Error location disable */ -#define PMERRLOC_DISABLE (1 << 0) - -#define ATMEL_PMERRLOC_ELSR 0x010 /* Error location status */ -#define PMERRLOC_ELSR_BUSY (1 << 0) -#define ATMEL_PMERRLOC_ELIER 0x014 /* Error location int enable */ -#define ATMEL_PMERRLOC_ELIDR 0x018 /* Error location int disable */ -#define ATMEL_PMERRLOC_ELIMR 0x01c /* Error location int mask */ -#define ATMEL_PMERRLOC_ELISR 0x020 /* Error location int status */ -#define PMERRLOC_ERR_NUM_MASK (0x1f << 8) -#define PMERRLOC_CALC_DONE (1 << 0) -#define ATMEL_PMERRLOC_SIGMAx 0x028 /* Error location SIGMA x */ -#define ATMEL_PMERRLOC_ELx 0x08c /* Error location x */ - -/* Register access macros for PMECC */ -#define pmecc_readl_relaxed(addr, reg) \ - readl((addr) + ATMEL_PMECC_##reg) - -#define pmecc_writel(addr, reg, value) \ - writel((value), (addr) + ATMEL_PMECC_##reg) - -#define pmecc_readb_ecc_relaxed(addr, sector, n) \ - readb((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n)) - -#define pmecc_readl_rem_relaxed(addr, sector, n) \ - readl((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4)) - -#define pmerrloc_readl_relaxed(addr, reg) \ - readl((addr) + ATMEL_PMERRLOC_##reg) - -#define pmerrloc_writel(addr, reg, value) \ - writel((value), (addr) + ATMEL_PMERRLOC_##reg) - -#define pmerrloc_writel_sigma_relaxed(addr, n, value) \ - writel((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4)) - -#define pmerrloc_readl_sigma_relaxed(addr, n) \ - readl((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4)) - -#define pmerrloc_readl_el_relaxed(addr, n) \ - readl((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4)) - -/* Galois field dimension */ -#define PMECC_GF_DIMENSION_13 13 -#define PMECC_GF_DIMENSION_14 14 - -#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000 -#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000 - -/* Time out value for reading PMECC status register */ -#define PMECC_MAX_TIMEOUT_MS 100 * MSECOND - -#endif |