diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/Kconfig | 2 | ||||
-rw-r--r-- | drivers/mtd/devices/Kconfig | 8 | ||||
-rw-r--r-- | drivers/mtd/nand/Kconfig | 9 | ||||
-rw-r--r-- | drivers/mtd/ubi/Kconfig | 2 |
4 files changed, 10 insertions, 11 deletions
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 0a4ca31bda..9450f5de8b 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,5 +1,5 @@ menuconfig MTD - bool "Memory Technology Device (MTD) support" + bool "Memory Technology Device (MTD) support" if MTD diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 679ea80b73..61278a235d 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -15,7 +15,7 @@ config MTD_DATAFLASH_WRITE_VERIFY help This adds an extra check when data is written to the flash. It may help if you are verifying chip setup (timings etc) on - your board. There is a rare possibility that even though the + your board. There is a rare possibility that even though the device thinks the write was successful, a bit could have been flipped accidentally due to device wear or something else. @@ -24,9 +24,9 @@ config MTD_M25P80 depends on SPI help This enables access to most modern SPI flash chips, used for - program and data storage. Series supported include Atmel AT26DF, - Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips - are supported as well. See the driver source for the current list, + program and data storage. Series supported include Atmel AT26DF, + Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips + are supported as well. See the driver source for the current list, or to add other chips. Note that the original DataFlash chips (AT45 series, not AT26DF), diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index d96ef9e813..49daabfb47 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -1,5 +1,5 @@ menuconfig NAND - bool "NAND support " + bool "NAND support" select MTD_NAND_IDS help This enables support for accessing all type of NAND flash @@ -63,8 +63,8 @@ config NAND_OMAP_GPMC tristate "NAND Flash Support for GPMC based OMAP platforms" depends on OMAP_GPMC help - Support for NAND flash using GPMC. GPMC is a common memory - interface found on Texas Instrument's OMAP platforms + Support for NAND flash using GPMC. GPMC is a common memory + interface found on Texas Instrument's OMAP platforms config NAND_ATMEL bool @@ -77,7 +77,7 @@ config NAND_ATMEL_PMECC depends on NAND_ATMEL select NAND_ECC_HW help - Support for PMECC present on the SoC sam9x5 and sam9n12 + Support for PMECC present on the SoC sam9x5 and sam9n12 config NAND_S3C24XX bool @@ -104,7 +104,6 @@ config MTD_NAND_ECC_SMC config MTD_NAND_MUSEUM_IDS bool "Enable chip ids for obsolete ancient NAND devices" - depends on MTD_NAND default n help Enable this option only when your board has first generation diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 2cf474ab59..6df954cbe8 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -1,5 +1,5 @@ config UBI - bool "UBI support " + bool "UBI support" select PARTITION_NEED_MTD select CRC32 help |