diff options
Diffstat (limited to 'dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml')
| -rw-r--r-- | dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml | 389 |
1 files changed, 0 insertions, 389 deletions
diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml deleted file mode 100644 index 564ae6aacc..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-pmc.yaml +++ /dev/null @@ -1,389 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Tegra Power Management Controller (PMC) - -maintainers: - - Thierry Reding <thierry.reding@gmail.com> - - Jonathan Hunter <jonathanh@nvidia.com> - -properties: - compatible: - enum: - - nvidia,tegra20-pmc - - nvidia,tegra30-pmc - - nvidia,tegra114-pmc - - nvidia,tegra124-pmc - - nvidia,tegra210-pmc - - reg: - maxItems: 1 - description: - Offset and length of the register set for the device. - - clock-names: - items: - - const: pclk - - const: clk32k_in - description: - Must includes entries pclk and clk32k_in. - pclk is the Tegra clock of that name and clk32k_in is 32KHz clock - input to Tegra. - - clocks: - maxItems: 2 - description: - Must contain an entry for each entry in clock-names. - See ../clocks/clocks-bindings.txt for details. - - '#clock-cells': - const: 1 - description: - Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. - PMC also has blink control which allows 32Khz clock output to - Tegra blink pad. - Consumer of PMC clock should specify the desired clock by having - the clock ID in its "clocks" phandle cell with pmc clock provider. - See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC - clock IDs. - - '#interrupt-cells': - const: 2 - description: - Specifies number of cells needed to encode an interrupt source. - The value must be 2. - - interrupt-controller: true - - nvidia,invert-interrupt: - $ref: /schemas/types.yaml#/definitions/flag - description: Inverts the PMU interrupt signal. - The PMU is an external Power Management Unit, whose interrupt output - signal is fed into the PMC. This signal is optionally inverted, and - then fed into the ARM GIC. The PMC is not involved in the detection - or handling of this interrupt signal, merely its inversion. - - nvidia,core-power-req-active-high: - $ref: /schemas/types.yaml#/definitions/flag - description: Core power request active-high. - - nvidia,sys-clock-req-active-high: - $ref: /schemas/types.yaml#/definitions/flag - description: System clock request active-high. - - nvidia,combined-power-req: - $ref: /schemas/types.yaml#/definitions/flag - description: combined power request for CPU and Core. - - nvidia,cpu-pwr-good-en: - $ref: /schemas/types.yaml#/definitions/flag - description: - CPU power good signal from external PMIC to PMC is enabled. - - nvidia,suspend-mode: - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2] - description: - The suspend mode that the platform should use. - Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh - Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh - Mode 2 is for LP2, CPU voltage off - - nvidia,cpu-pwr-good-time: - $ref: /schemas/types.yaml#/definitions/uint32 - description: CPU power good time in uSec. - - nvidia,cpu-pwr-off-time: - $ref: /schemas/types.yaml#/definitions/uint32 - description: CPU power off time in uSec. - - nvidia,core-pwr-good-time: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: - <Oscillator-stable-time Power-stable-time> - Core power good time in uSec. - - nvidia,core-pwr-off-time: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Core power off time in uSec. - - nvidia,lp0-vec: - $ref: /schemas/types.yaml#/definitions/uint32-array - description: - <start length> Starting address and length of LP0 vector. - The LP0 vector contains the warm boot code that is executed - by AVP when resuming from the LP0 state. - The AVP (Audio-Video Processor) is an ARM7 processor and - always being the first boot processor when chip is power on - or resume from deep sleep mode. When the system is resumed - from the deep sleep mode, the warm boot code will restore - some PLLs, clocks and then brings up CPU0 for resuming the - system. - - i2c-thermtrip: - type: object - description: - On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists, - hardware-triggered thermal reset will be enabled. - - properties: - nvidia,i2c-controller-id: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - ID of I2C controller to send poweroff command to PMU. - Valid values are described in section 9.2.148 - "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference - Manual. - - nvidia,bus-addr: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Bus address of the PMU on the I2C bus. - - nvidia,reg-addr: - $ref: /schemas/types.yaml#/definitions/uint32 - description: PMU I2C register address to issue poweroff command. - - nvidia,reg-data: - $ref: /schemas/types.yaml#/definitions/uint32 - description: Poweroff command to write to PMU. - - nvidia,pinmux-id: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Pinmux used by the hardware when issuing Poweroff command. - Defaults to 0. Valid values are described in section 12.5.2 - "Pinmux Support" of the Tegra4 Technical Reference Manual. - - required: - - nvidia,i2c-controller-id - - nvidia,bus-addr - - nvidia,reg-addr - - nvidia,reg-data - - additionalProperties: false - - powergates: - type: object - description: | - This node contains a hierarchy of power domain nodes, which should - match the powergates on the Tegra SoC. Each powergate node - represents a power-domain on the Tegra SoC that can be power-gated - by the Tegra PMC. - Hardware blocks belonging to a power domain should contain - "power-domains" property that is a phandle pointing to corresponding - powergate node. - The name of the powergate node should be one of the below. Note that - not every powergate is applicable to all Tegra devices and the following - list shows which powergates are applicable to which devices. - Please refer to Tegra TRM for mode details on the powergate nodes to - use for each power-gate block inside Tegra. - Name Description Devices Applicable - 3d 3D Graphics Tegra20/114/124/210 - 3d0 3D Graphics 0 Tegra30 - 3d1 3D Graphics 1 Tegra30 - aud Audio Tegra210 - dfd Debug Tegra210 - dis Display A Tegra114/124/210 - disb Display B Tegra114/124/210 - heg 2D Graphics Tegra30/114/124/210 - iram Internal RAM Tegra124/210 - mpe MPEG Encode All - nvdec NVIDIA Video Decode Engine Tegra210 - nvjpg NVIDIA JPEG Engine Tegra210 - pcie PCIE Tegra20/30/124/210 - sata SATA Tegra30/124/210 - sor Display interfaces Tegra124/210 - ve2 Video Encode Engine 2 Tegra210 - venc Video Encode Engine All - vdec Video Decode Engine Tegra20/30/114/124 - vic Video Imaging Compositor Tegra124/210 - xusba USB Partition A Tegra114/124/210 - xusbb USB Partition B Tegra114/124/210 - xusbc USB Partition C Tegra114/124/210 - - patternProperties: - "^[a-z0-9]+$": - type: object - - patternProperties: - clocks: - minItems: 1 - maxItems: 8 - description: - Must contain an entry for each clock required by the PMC - for controlling a power-gate. - See ../clocks/clock-bindings.txt document for more details. - - resets: - minItems: 1 - maxItems: 8 - description: - Must contain an entry for each reset required by the PMC - for controlling a power-gate. - See ../reset/reset.txt for more details. - - '#power-domain-cells': - const: 0 - description: Must be 0. - - required: - - clocks - - resets - - '#power-domain-cells' - - additionalProperties: false - -patternProperties: - "^[a-f0-9]+-[a-f0-9]+$": - type: object - description: - This is a Pad configuration node. On Tegra SOCs a pad is a set of - pins which are configured as a group. The pin grouping is a fixed - attribute of the hardware. The PMC can be used to set pad power state - and signaling voltage. A pad can be either in active or power down mode. - The support for power state and signaling voltage configuration varies - depending on the pad in question. 3.3V and 1.8V signaling voltages - are supported on pins where software controllable signaling voltage - switching is available. - - The pad configuration state nodes are placed under the pmc node and they - are referred to by the pinctrl client properties. For more information - see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. - The pad name should be used as the value of the pins property in pin - configuration nodes. - - The following pads are present on Tegra124 and Tegra132 - audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic, - hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl, - sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias. - - The following pads are present on Tegra210 - audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, - debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi, - hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, - sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias. - - properties: - pins: - $ref: /schemas/types.yaml#/definitions/string - description: Must contain name of the pad(s) to be configured. - - low-power-enable: - $ref: /schemas/types.yaml#/definitions/flag - description: Configure the pad into power down mode. - - low-power-disable: - $ref: /schemas/types.yaml#/definitions/flag - description: Configure the pad into active mode. - - power-source: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or - TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. - The values are defined in - include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. - Power state can be configured on all Tegra124 and Tegra132 - pads. None of the Tegra124 or Tegra132 pads support signaling - voltage switching. - All of the listed Tegra210 pads except pex-cntrl support power - state configuration. Signaling voltage switching is supported - on below Tegra210 pads. - audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, - sdmmc3, spi, spi-hv, and uart. - - required: - - pins - - additionalProperties: false - - core-domain: - type: object - description: | - The vast majority of hardware blocks of Tegra SoC belong to a - Core power domain, which has a dedicated voltage rail that powers - the blocks. - - properties: - operating-points-v2: - description: - Should contain level, voltages and opp-supported-hw property. - The supported-hw is a bitfield indicating SoC speedo or process - ID mask. - - "#power-domain-cells": - const: 0 - - required: - - operating-points-v2 - - "#power-domain-cells" - - additionalProperties: false - - core-supply: - description: - Phandle to voltage regulator connected to the SoC Core power rail. - -required: - - compatible - - reg - - clock-names - - clocks - - '#clock-cells' - -additionalProperties: false - -dependencies: - "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] - "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] - -examples: - - | - - #include <dt-bindings/clock/tegra210-car.h> - #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> - #include <dt-bindings/soc/tegra-pmc.h> - - tegra_pmc: pmc@7000e400 { - compatible = "nvidia,tegra210-pmc"; - reg = <0x7000e400 0x400>; - core-supply = <®ulator>; - clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; - clock-names = "pclk", "clk32k_in"; - #clock-cells = <1>; - - nvidia,invert-interrupt; - nvidia,suspend-mode = <0>; - nvidia,cpu-pwr-good-time = <0>; - nvidia,cpu-pwr-off-time = <0>; - nvidia,core-pwr-good-time = <4587 3876>; - nvidia,core-pwr-off-time = <39065>; - nvidia,core-power-req-active-high; - nvidia,sys-clock-req-active-high; - - pd_core: core-domain { - operating-points-v2 = <&core_opp_table>; - #power-domain-cells = <0>; - }; - - powergates { - pd_audio: aud { - clocks = <&tegra_car TEGRA210_CLK_APE>, - <&tegra_car TEGRA210_CLK_APB2APE>; - resets = <&tegra_car 198>; - power-domains = <&pd_core>; - #power-domain-cells = <0>; - }; - - pd_xusbss: xusba { - clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; - resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; - power-domains = <&pd_core>; - #power-domain-cells = <0>; - }; - }; - }; |