diff options
Diffstat (limited to 'dts/Bindings/arm')
26 files changed, 330 insertions, 69 deletions
diff --git a/dts/Bindings/arm/adapteva.txt b/dts/Bindings/arm/adapteva.txt deleted file mode 100644 index 1d8af9e360..0000000000 --- a/dts/Bindings/arm/adapteva.txt +++ /dev/null @@ -1,7 +0,0 @@ -Adapteva Platforms Device Tree Bindings ---------------------------------------- - -Parallella board - -Required root node properties: - - compatible = "adapteva,parallella"; diff --git a/dts/Bindings/arm/amlogic.txt b/dts/Bindings/arm/amlogic.txt index 69880560c0..b5c2b5c357 100644 --- a/dts/Bindings/arm/amlogic.txt +++ b/dts/Bindings/arm/amlogic.txt @@ -41,6 +41,14 @@ Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: Required root node property: compatible: "amlogic,s905d", "amlogic,meson-gxl"; +Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s805x", "amlogic,meson-gxl"; + +Boards with the Amlogic Meson GXL S905W SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s905w", "amlogic,meson-gxl"; + Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; @@ -79,6 +87,11 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "amlogic,p241" (Meson gxl s805x) + + - "amlogic,p281" (Meson gxl s905w) + - "oranth,tx3-mini" (Meson gxl s905w) + - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) - "khadas,vim2" (Meson gxm s912) diff --git a/dts/Bindings/arm/atmel-pmc.txt b/dts/Bindings/arm/atmel-pmc.txt deleted file mode 100644 index 795cc78543..0000000000 --- a/dts/Bindings/arm/atmel-pmc.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Power Management Controller (PMC) - -Required properties: -- compatible: Should be "atmel,<chip>-pmc". - <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12, - at91sam9x5, sama5d3 - -- reg: Should contain PMC registers location and length - -Examples: - pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; - }; diff --git a/dts/Bindings/arm/bcm/brcm,brcmstb.txt b/dts/Bindings/arm/bcm/brcm,brcmstb.txt index c052caad36..104cc9b41d 100644 --- a/dts/Bindings/arm/bcm/brcm,brcmstb.txt +++ b/dts/Bindings/arm/bcm/brcm,brcmstb.txt @@ -189,7 +189,11 @@ Power-Down (SRPD), among other things. Required properties: - compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.1" "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr-rev-b.2.3" + "brcm,brcmstb-memc-ddr-rev-b.3.0" + "brcm,brcmstb-memc-ddr-rev-b.3.1" "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range diff --git a/dts/Bindings/arm/coresight.txt b/dts/Bindings/arm/coresight.txt index 15ac8e8dcf..5d1ad09baf 100644 --- a/dts/Bindings/arm/coresight.txt +++ b/dts/Bindings/arm/coresight.txt @@ -39,6 +39,8 @@ its hardware characteristcs. - System Trace Macrocell: "arm,coresight-stm", "arm,primecell"; [1] + - Coresight Address Translation Unit (CATU) + "arm,coresight-catu", "arm,primecell"; * reg: physical base address and length of the register set(s) of the component. @@ -84,8 +86,15 @@ its hardware characteristcs. * Optional property for TMC: * arm,buffer-size: size of contiguous buffer space for TMC ETR - (embedded trace router) + (embedded trace router). This property is obsolete. The buffer size + can be configured dynamically via buffer_size property in sysfs. + * arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely + use the SG mode on this system. + +* Optional property for CATU : + * interrupts : Exactly one SPI may be listed for reporting the address + error Example: @@ -118,6 +127,35 @@ Example: }; }; + etr@20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20070000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* input port */ + port@0 { + reg = <0>; + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator2_out_port0>; + }; + }; + + /* CATU link represented by output port */ + port@1 { + reg = <1>; + etr_out_port: endpoint { + remote-endpoint = <&catu_in_port>; + }; + }; + }; + }; + 2. Links replicator { /* non-configurable replicators don't show up on the @@ -247,5 +285,23 @@ Example: }; }; +5. CATU + + catu@207e0000 { + compatible = "arm,coresight-catu", "arm,primecell"; + reg = <0 0x207e0000 0 0x1000>; + + clocks = <&oscclk6a>; + clock-names = "apb_pclk"; + + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + port { + catu_in_port: endpoint { + slave-mode; + remote-endpoint = <&etr_out_port>; + }; + }; + }; + [1]. There is currently two version of STM: STM32 and STM500. Both have the same HW interface and as such don't need an explicit binding name. diff --git a/dts/Bindings/arm/cpu-capacity.txt b/dts/Bindings/arm/cpu-capacity.txt index 7809fbe0cd..9b5685a1d1 100644 --- a/dts/Bindings/arm/cpu-capacity.txt +++ b/dts/Bindings/arm/cpu-capacity.txt @@ -94,7 +94,7 @@ cpus { }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; diff --git a/dts/Bindings/arm/cpus.txt b/dts/Bindings/arm/cpus.txt index 29e1dc5d50..96dfccc0fa 100644 --- a/dts/Bindings/arm/cpus.txt +++ b/dts/Bindings/arm/cpus.txt @@ -183,6 +183,7 @@ described below. "marvell,sheeva-v5" "nvidia,tegra132-denver" "nvidia,tegra186-denver" + "nvidia,tegra194-carmel" "qcom,krait" "qcom,kryo" "qcom,kryo385" @@ -219,6 +220,7 @@ described below. "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" "renesas,apmu" + "renesas,r9a06g032-smp" "rockchip,rk3036-smp" "rockchip,rk3066-smp" "ste,dbx500-smp" diff --git a/dts/Bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/dts/Bindings/arm/freescale/fsl,vf610-mscm-ir.txt index 669808b2af..6dd6f39923 100644 --- a/dts/Bindings/arm/freescale/fsl,vf610-mscm-ir.txt +++ b/dts/Bindings/arm/freescale/fsl,vf610-mscm-ir.txt @@ -18,9 +18,6 @@ Required properties: assignment of the interrupt router is required. Flags get passed only when using GIC as parent. Flags encoding as documented by the GIC bindings. -- interrupt-parent: Should be the phandle for the interrupt controller of - the CPU the device tree is intended to be used on. This - is either the node of the GIC or NVIC controller. Example: mscm_ir: interrupt-controller@40001800 { diff --git a/dts/Bindings/arm/freescale/m4if.txt b/dts/Bindings/arm/freescale/m4if.txt new file mode 100644 index 0000000000..93bd7b867a --- /dev/null +++ b/dts/Bindings/arm/freescale/m4if.txt @@ -0,0 +1,12 @@ +* Freescale Multi Master Multi Memory Interface (M4IF) module + +Required properties: +- compatible : Should be "fsl,imx51-m4if" +- reg : Address and length of the register set for the device + +Example: + +m4if: m4if@83fd8000 { + compatible = "fsl,imx51-m4if"; + reg = <0x83fd8000 0x1000>; +}; diff --git a/dts/Bindings/arm/freescale/tigerp.txt b/dts/Bindings/arm/freescale/tigerp.txt new file mode 100644 index 0000000000..19e2aad63d --- /dev/null +++ b/dts/Bindings/arm/freescale/tigerp.txt @@ -0,0 +1,12 @@ +* Freescale Tigerp platform module + +Required properties: +- compatible : Should be "fsl,imx51-tigerp" +- reg : Address and length of the register set for the device + +Example: + +tigerp: tigerp@83fa0000 { + compatible = "fsl,imx51-tigerp"; + reg = <0x83fa0000 0x28>; +}; diff --git a/dts/Bindings/arm/fsl.txt b/dts/Bindings/arm/fsl.txt index cdb9dd7057..8a1baa2b97 100644 --- a/dts/Bindings/arm/fsl.txt +++ b/dts/Bindings/arm/fsl.txt @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board Required root node properties: - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; +i.MX6SLL EVK board +Required root node properties: + - compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + Generic i.MX boards ------------------- diff --git a/dts/Bindings/arm/idle-states.txt b/dts/Bindings/arm/idle-states.txt index 7a591333f2..2c73847499 100644 --- a/dts/Bindings/arm/idle-states.txt +++ b/dts/Bindings/arm/idle-states.txt @@ -237,8 +237,8 @@ processor idle states, defined as device tree nodes, are listed. Value type: <stringlist> Usage and definition depend on ARM architecture version. # On ARM v8 64-bit this property is required and must - be one of: - - "psci" (see bindings in [2]) + be: + - "psci" # On ARM 32-bit systems this property is optional The nodes describing the idle states (state) can only be defined within the diff --git a/dts/Bindings/arm/insignal-boards.txt b/dts/Bindings/arm/insignal-boards.txt deleted file mode 100644 index 524c3dc5d8..0000000000 --- a/dts/Bindings/arm/insignal-boards.txt +++ /dev/null @@ -1,8 +0,0 @@ -* Insignal's Exynos4210 based Origen evaluation board - -Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC. - -Required root node properties: - - compatible = should be one or more of the following. - (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board. - (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC. diff --git a/dts/Bindings/arm/marvell/ap806-system-controller.txt b/dts/Bindings/arm/marvell/ap806-system-controller.txt index 0b887440e0..3fd21bb7cb 100644 --- a/dts/Bindings/arm/marvell/ap806-system-controller.txt +++ b/dts/Bindings/arm/marvell/ap806-system-controller.txt @@ -2,14 +2,17 @@ Marvell Armada AP806 System Controller ====================================== The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K -SoCs. It contains a system controller, which provides a number -registers giving access to numerous features: clocks, pin-muxing and -many other SoC configuration items. This DT binding allows to describe -this system controller. +SoCs. It contains system controllers, which provide several registers +giving access to numerous features: clocks, pin-muxing and many other +SoC configuration items. This DT binding allows to describe these +system controllers. For the top level node: - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the AP806 system controller + - reg: register area of the AP806 system controller + +SYSTEM CONTROLLER 0 +=================== Clocks: ------- @@ -98,3 +101,38 @@ ap_syscon: system-controller@6f4000 { gpio-ranges = <&ap_pinctrl 0 0 19>; }; }; + +SYSTEM CONTROLLER 1 +=================== + +Thermal: +-------- + +For common binding part and usage, refer to +Documentation/devicetree/bindings/thermal/thermal.txt + +The thermal IP can probe the temperature all around the processor. It +may feature several channels, each of them wired to one sensor. + +Required properties: +- compatible: must be one of: + * marvell,armada-ap806-thermal +- reg: register range associated with the thermal functions. + +Optional properties: +- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer + to this IP and represents the channel ID. There is one sensor per + channel. O refers to the thermal IP internal channel, while positive + IDs refer to each CPU. + +Example: +ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/dts/Bindings/arm/marvell/armada-37xx.txt b/dts/Bindings/arm/marvell/armada-37xx.txt index 35c3c3460d..eddde4faef 100644 --- a/dts/Bindings/arm/marvell/armada-37xx.txt +++ b/dts/Bindings/arm/marvell/armada-37xx.txt @@ -33,3 +33,18 @@ nb_pm: syscon@14000 { compatible = "marvell,armada-3700-nb-pm", "syscon"; reg = <0x14000 0x60>; } + +AVS +--- + +For AVS an other component is needed: + +Required properties: +- compatible : should contain "marvell,armada-3700-avs", "syscon"; +- reg : the register start and length for the AVS + +Example: +avs: avs@11500 { + compatible = "marvell,armada-3700-avs", "syscon"; + reg = <0x11500 0x40>; +} diff --git a/dts/Bindings/arm/marvell/cp110-system-controller0.txt b/dts/Bindings/arm/marvell/cp110-system-controller.txt index 29cdbae6c5..81ce742d27 100644 --- a/dts/Bindings/arm/marvell/cp110-system-controller0.txt +++ b/dts/Bindings/arm/marvell/cp110-system-controller.txt @@ -1,15 +1,18 @@ -Marvell Armada CP110 System Controller 0 -======================================== +Marvell Armada CP110 System Controller +====================================== The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K -SoCs. It contains two sets of system control registers, System -Controller 0 and System Controller 1. This Device Tree binding allows -to describe the first system controller, which provides registers to -configure various aspects of the SoC. +SoCs. It contains system controllers, which provide several registers +giving access to numerous features: clocks, pin-muxing and many other +SoC configuration items. This DT binding allows to describe these +system controllers. For the top level node: - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the CP110 system controller 0 + - reg: register area of the CP110 system controller + +SYSTEM CONTROLLER 0 +=================== Clocks: ------- @@ -163,26 +166,60 @@ Required properties: Example: -cpm_syscon0: system-controller@440000 { +CP110_LABEL(syscon0): system-controller@440000 { compatible = "syscon", "simple-mfd"; reg = <0x440000 0x1000>; - cpm_clk: clock { + CP110_LABEL(clk): clock { compatible = "marvell,cp110-clock"; #clock-cells = <2>; }; - cpm_pinctrl: pinctrl { + CP110_LABEL(pinctrl): pinctrl { compatible = "marvell,armada-8k-cpm-pinctrl"; }; - cpm_gpio1: gpio@100 { + CP110_LABEL(gpio1): gpio@100 { compatible = "marvell,armada-8k-gpio"; offset = <0x100>; ngpios = <32>; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&cpm_pinctrl 0 0 32>; + gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; }; }; + +SYSTEM CONTROLLER 1 +=================== + +Thermal: +-------- + +The thermal IP can probe the temperature all around the processor. It +may feature several channels, each of them wired to one sensor. + +For common binding part and usage, refer to +Documentation/devicetree/bindings/thermal/thermal.txt + +Required properties: +- compatible: must be one of: + * marvell,armada-cp110-thermal +- reg: register range associated with the thermal functions. + +Optional properties: +- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer + to this IP and represents the channel ID. There is one sensor per + channel. O refers to the thermal IP internal channel. + +Example: +CP110_LABEL(syscon1): system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + + CP110_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/dts/Bindings/arm/mediatek.txt b/dts/Bindings/arm/mediatek.txt index 7d21ab37c1..8f260e5cfd 100644 --- a/dts/Bindings/arm/mediatek.txt +++ b/dts/Bindings/arm/mediatek.txt @@ -11,6 +11,7 @@ compatible: Must contain one of "mediatek,mt6589" "mediatek,mt6592" "mediatek,mt6755" + "mediatek,mt6765" "mediatek,mt6795" "mediatek,mt6797" "mediatek,mt7622" @@ -41,12 +42,18 @@ Supported boards: - Evaluation phone for MT6755(Helio P10): Required root node properties: - compatible = "mediatek,mt6755-evb", "mediatek,mt6755"; +- Evaluation board for MT6765(Helio P22): + Required root node properties: + - compatible = "mediatek,mt6765-evb", "mediatek,mt6765"; - Evaluation board for MT6795(Helio X10): Required root node properties: - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; - Evaluation board for MT6797(Helio X20): Required root node properties: - compatible = "mediatek,mt6797-evb", "mediatek,mt6797"; +- Mediatek X20 Development Board: + Required root node properties: + - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797"; - Reference board variant 1 for MT7622: Required root node properties: - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; @@ -59,9 +66,6 @@ Supported boards: - Reference board for MT7623n with eMMC: Required root node properties: - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623"; -- Reference board for MT7623n with NAND: - Required root node properties: - - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; - Bananapi BPI-R2 board: - compatible = "bananapi,bpi-r2", "mediatek,mt7623"; - MTK mt8127 tablet moose EVB: diff --git a/dts/Bindings/arm/msm/qcom,llcc.txt b/dts/Bindings/arm/msm/qcom,llcc.txt new file mode 100644 index 0000000000..5e85749262 --- /dev/null +++ b/dts/Bindings/arm/msm/qcom,llcc.txt @@ -0,0 +1,26 @@ +== Introduction== + +LLCC (Last Level Cache Controller) provides last level of cache memory in SOC, +that can be shared by multiple clients. Clients here are different cores in the +SOC, the idea is to minimize the local caches at the clients and migrate to +common pool of memory. Cache memory is divided into partitions called slices +which are assigned to clients. Clients can query the slice details, activate +and deactivate them. + +Properties: +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,sdm845-llcc" + +- reg: + Usage: required + Value Type: <prop-encoded-array> + Definition: Start address and the the size of the register region. + +Example: + + cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0x1100000 0x250000>; + }; diff --git a/dts/Bindings/arm/omap/crossbar.txt b/dts/Bindings/arm/omap/crossbar.txt index ecb360ed0e..4cd5d873fc 100644 --- a/dts/Bindings/arm/omap/crossbar.txt +++ b/dts/Bindings/arm/omap/crossbar.txt @@ -10,7 +10,6 @@ Required properties: - compatible : Should be "ti,irq-crossbar" - reg: Base address and the size of the crossbar registers. - interrupt-controller: indicates that this block is an interrupt controller. -- interrupt-parent: the interrupt controller this block is connected to. - ti,max-irqs: Total number of irqs available at the parent interrupt controller. - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed. - ti,reg-size: Size of a individual register in bytes. Every individual diff --git a/dts/Bindings/arm/omap/l4.txt b/dts/Bindings/arm/omap/l4.txt index b4f8a16e7e..6816adcdc1 100644 --- a/dts/Bindings/arm/omap/l4.txt +++ b/dts/Bindings/arm/omap/l4.txt @@ -7,6 +7,7 @@ Required properties: Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus + Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus @@ -15,11 +16,21 @@ Required properties: Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus - ranges : contains the IO map range for the bus +- reg : registers link agent and interconnect agent and access protection +- reg-names : "la" for link agent, "ia0" to "ia3" for one to three + interconnect agent instances, "ap" for access if it exists Examples: -l4: l4@48000000 { - compatible "ti,omap2-l4", "simple-bus"; +l4: interconnect@48000000 { + compatible "ti,omap4-l4-per", "simple-bus"; + reg = <0x48000000 0x800>, + <0x48000800 0x800>, + <0x48001000 0x400>, + <0x48001400 0x400>, + <0x48001800 0x400>, + <0x48001c00 0x400>; + reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x48000000 0x100000>; diff --git a/dts/Bindings/arm/rockchip.txt b/dts/Bindings/arm/rockchip.txt index 1c1d62d03c..acfd3c773d 100644 --- a/dts/Bindings/arm/rockchip.txt +++ b/dts/Bindings/arm/rockchip.txt @@ -1,5 +1,10 @@ Rockchip platforms device tree bindings --------------------------------------- + +- 96boards RK3399 Ficus (ROCK960 Enterprise Edition) + Required root node properties: + - compatible = "vamrs,ficus", "rockchip,rk3399"; + - Amarula Vyasa RK3288 board Required root node properties: - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; @@ -66,6 +71,15 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "geekbuying,geekbox", "rockchip,rk3368"; +- Google Bob (Asus Chromebook Flip C101PA): + Required root node properties: + compatible = "google,bob-rev13", "google,bob-rev12", + "google,bob-rev11", "google,bob-rev10", + "google,bob-rev9", "google,bob-rev8", + "google,bob-rev7", "google,bob-rev6", + "google,bob-rev5", "google,bob-rev4", + "google,bob", "google,gru", "rockchip,rk3399"; + - Google Brain (dev-board): Required root node properties: - compatible = "google,veyron-brain-rev0", "google,veyron-brain", diff --git a/dts/Bindings/arm/samsung/pmu.txt b/dts/Bindings/arm/samsung/pmu.txt index 16685787d2..433bfd7593 100644 --- a/dts/Bindings/arm/samsung/pmu.txt +++ b/dts/Bindings/arm/samsung/pmu.txt @@ -40,9 +40,6 @@ following properties: - #interrupt-cells: must be identical to the that of the parent interrupt controller. -- interrupt-parent: a phandle indicating which interrupt controller - this PMU signals interrupts to. - Optional nodes: diff --git a/dts/Bindings/arm/samsung/samsung-boards.txt b/dts/Bindings/arm/samsung/samsung-boards.txt index 6970f30a37..56021bf2a9 100644 --- a/dts/Bindings/arm/samsung/samsung-boards.txt +++ b/dts/Bindings/arm/samsung/samsung-boards.txt @@ -1,7 +1,10 @@ -* Samsung's Exynos SoC based boards +* Samsung's Exynos and S5P SoC based boards Required root node properties: - compatible = should be one or more of the following. + - "samsung,aries" - for S5PV210-based Samsung Aries board. + - "samsung,fascinate4g" - for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board. + - "samsung,galaxys" - for S5PV210-based Samsung Galaxy S (i9000) board. - "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module. - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board. - "samsung,monk" - for Exynos3250-based Samsung Simband board. diff --git a/dts/Bindings/arm/shmobile.txt b/dts/Bindings/arm/shmobile.txt index d8cf740132..89b4a389fb 100644 --- a/dts/Bindings/arm/shmobile.txt +++ b/dts/Bindings/arm/shmobile.txt @@ -51,7 +51,8 @@ SoCs: compatible = "renesas,r8a77990" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" - + - RZ/N1D (R9A06G032) + compatible = "renesas,r9a06g032" Boards: @@ -112,6 +113,8 @@ Boards: compatible = "renesas,porter", "renesas,r8a7791" - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" + - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) + compatible = "renesas,rzn1d400-db", "renesas,r9a06g032" - Salvator-X (RTP0RC7795SIPB0010S) compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) diff --git a/dts/Bindings/arm/ti/k3.txt b/dts/Bindings/arm/ti/k3.txt new file mode 100644 index 0000000000..6a059cabb2 --- /dev/null +++ b/dts/Bindings/arm/ti/k3.txt @@ -0,0 +1,23 @@ +Texas Instruments K3 Multicore SoC architecture device tree bindings +-------------------------------------------------------------------- + +Platforms based on Texas Instruments K3 Multicore SoC architecture +shall follow the following scheme: + +SoCs +---- + +Each device tree root node must specify which exact SoC in K3 Multicore SoC +architecture it uses, using one of the following compatible values: + +- AM654 + compatible = "ti,am654"; + +Boards +------ + +In addition, each device tree root node must specify which one or more +of the following board-specific compatible values: + +- AM654 EVM + compatible = "ti,am654-evm", "ti,am654"; diff --git a/dts/Bindings/arm/xilinx.txt b/dts/Bindings/arm/xilinx.txt index b9043bc35c..26fe5ecc43 100644 --- a/dts/Bindings/arm/xilinx.txt +++ b/dts/Bindings/arm/xilinx.txt @@ -8,18 +8,38 @@ Required root node properties: Additional compatible strings: -- Xilinx internal board cc108 +- Adapteva Parallella board + "adapteva,parallella" + +- Avnet MicroZed board + "avnet,zynq-microzed" + "xlnx,zynq-microzed" + +- Avnet ZedBoard board + "avnet,zynq-zed" + "xlnx,zynq-zed" + +- Digilent Zybo board + "digilent,zynq-zybo" + +- Digilent Zybo Z7 board + "digilent,zynq-zybo-z7" + +- Xilinx CC108 internal board "xlnx,zynq-cc108" -- Xilinx internal board zc770 with different FMC cards +- Xilinx ZC702 internal board + "xlnx,zynq-zc702" + +- Xilinx ZC706 internal board + "xlnx,zynq-zc706" + +- Xilinx ZC770 internal board, with different FMC cards "xlnx,zynq-zc770-xm010" "xlnx,zynq-zc770-xm011" "xlnx,zynq-zc770-xm012" "xlnx,zynq-zc770-xm013" -- Digilent Zybo Z7 board - "digilent,zynq-zybo-z7" - --------------------------------------------------------------- Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings |