diff options
Diffstat (limited to 'dts/Bindings/arm')
21 files changed, 66 insertions, 729 deletions
diff --git a/dts/Bindings/arm/altera/socfpga-eccmgr.txt b/dts/Bindings/arm/altera/socfpga-eccmgr.txt deleted file mode 100644 index 4a1714f96b..0000000000 --- a/dts/Bindings/arm/altera/socfpga-eccmgr.txt +++ /dev/null @@ -1,233 +0,0 @@ -Altera SoCFPGA ECC Manager -This driver uses the EDAC framework to implement the SOCFPGA ECC Manager. -The ECC Manager counts and corrects single bit errors and counts/handles -double bit errors which are uncorrectable. - -Cyclone5 and Arria5 ECC Manager -Required Properties: -- compatible : Should be "altr,socfpga-ecc-manager" -- #address-cells: must be 1 -- #size-cells: must be 1 -- ranges : standard definition, should translate from local addresses - -Subcomponents: - -L2 Cache ECC -Required Properties: -- compatible : Should be "altr,socfpga-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. Note the rising edge type. - -On Chip RAM ECC -Required Properties: -- compatible : Should be "altr,socfpga-ocram-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- iram : phandle to On-Chip RAM definition. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. Note the rising edge type. - -Example: - - eccmgr: eccmgr@ffd08140 { - compatible = "altr,socfpga-ecc-manager"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - l2-ecc@ffd08140 { - compatible = "altr,socfpga-l2-ecc"; - reg = <0xffd08140 0x4>; - interrupts = <0 36 1>, <0 37 1>; - }; - - ocram-ecc@ffd08144 { - compatible = "altr,socfpga-ocram-ecc"; - reg = <0xffd08144 0x4>; - iram = <&ocram>; - interrupts = <0 178 1>, <0 179 1>; - }; - }; - -Arria10 SoCFPGA ECC Manager -The Arria10 SoC ECC Manager handles the IRQs for each peripheral -in a shared register instead of individual IRQs like the Cyclone5 -and Arria5. Therefore the device tree is different as well. - -Required Properties: -- compatible : Should be "altr,socfpga-a10-ecc-manager" -- altr,sysgr-syscon : phandle to Arria10 System Manager Block - containing the ECC manager registers. -- #address-cells: must be 1 -- #size-cells: must be 1 -- interrupts : Should be single bit error interrupt, then double bit error - interrupt. -- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller -- #interrupt-cells : must be set to 2. -- ranges : standard definition, should translate from local addresses - -Subcomponents: - -L2 Cache ECC -Required Properties: -- compatible : Should be "altr,socfpga-a10-l2-ecc" -- reg : Address and size for ECC error interrupt clear registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -On-Chip RAM ECC -Required Properties: -- compatible : Should be "altr,socfpga-a10-ocram-ecc" -- reg : Address and size for ECC block registers. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -Ethernet FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-eth-mac-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent Ethernet node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -NAND FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-nand-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent NAND node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -DMA FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-dma-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent DMA node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -USB FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-usb-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent USB node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -QSPI FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-qspi-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent QSPI node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order. - -SDMMC FIFO ECC -Required Properties: -- compatible : Should be "altr,socfpga-sdmmc-ecc" -- reg : Address and size for ECC block registers. -- altr,ecc-parent : phandle to parent SD/MMC node. -- interrupts : Should be single bit error interrupt, then double bit error - interrupt, in this order for port A, and then single bit error interrupt, - then double bit error interrupt in this order for port B. - -Example: - - eccmgr: eccmgr@ffd06000 { - compatible = "altr,socfpga-a10-ecc-manager"; - altr,sysmgr-syscon = <&sysmgr>; - #address-cells = <1>; - #size-cells = <1>; - interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, - <0 0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - ranges; - - l2-ecc@ffd06010 { - compatible = "altr,socfpga-a10-l2-ecc"; - reg = <0xffd06010 0x4>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, - <32 IRQ_TYPE_LEVEL_HIGH>; - }; - - ocram-ecc@ff8c3000 { - compatible = "altr,socfpga-a10-ocram-ecc"; - reg = <0xff8c3000 0x90>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, - <33 IRQ_TYPE_LEVEL_HIGH> ; - }; - - emac0-rx-ecc@ff8c0800 { - compatible = "altr,socfpga-eth-mac-ecc"; - reg = <0xff8c0800 0x400>; - altr,ecc-parent = <&gmac0>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, - <36 IRQ_TYPE_LEVEL_HIGH>; - }; - - emac0-tx-ecc@ff8c0c00 { - compatible = "altr,socfpga-eth-mac-ecc"; - reg = <0xff8c0c00 0x400>; - altr,ecc-parent = <&gmac0>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, - <37 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-buf-ecc@ff8c2000 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2000 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-rd-ecc@ff8c2400 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2400 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <13 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>; - }; - - nand-wr-ecc@ff8c2800 { - compatible = "altr,socfpga-nand-ecc"; - reg = <0xff8c2800 0x400>; - altr,ecc-parent = <&nand>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>; - }; - - dma-ecc@ff8c8000 { - compatible = "altr,socfpga-dma-ecc"; - reg = <0xff8c8000 0x400>; - altr,ecc-parent = <&pdma>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, - <42 IRQ_TYPE_LEVEL_HIGH>; - - usb0-ecc@ff8c8800 { - compatible = "altr,socfpga-usb-ecc"; - reg = <0xff8c8800 0x400>; - altr,ecc-parent = <&usb0>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, - <34 IRQ_TYPE_LEVEL_HIGH>; - }; - - qspi-ecc@ff8c8400 { - compatible = "altr,socfpga-qspi-ecc"; - reg = <0xff8c8400 0x400>; - altr,ecc-parent = <&qspi>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, - <46 IRQ_TYPE_LEVEL_HIGH>; - }; - - sdmmc-ecc@ff8c2c00 { - compatible = "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c2c00 0x400>; - altr,ecc-parent = <&mmc>; - interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <16 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>; - }; - }; diff --git a/dts/Bindings/arm/amlogic.txt b/dts/Bindings/arm/amlogic.txt index f747f47922..69880560c0 100644 --- a/dts/Bindings/arm/amlogic.txt +++ b/dts/Bindings/arm/amlogic.txt @@ -25,6 +25,10 @@ Boards with the Amlogic Meson8b SoC shall have the following properties: Required root node property: compatible: "amlogic,meson8b"; +Boards with the Amlogic Meson8m2 SoC shall have the following properties: + Required root node property: + compatible: "amlogic,meson8m2"; + Boards with the Amlogic Meson GXBaby SoC shall have the following properties: Required root node property: compatible: "amlogic,meson-gxbb"; @@ -54,6 +58,8 @@ Board compatible values (alphabetically, grouped by SoC): - "hardkernel,odroid-c1" (Meson8b) - "tronfy,mxq" (Meson8b) + - "tronsmart,mxiii-plus" (Meson8m2) + - "amlogic,p200" (Meson gxbb) - "amlogic,p201" (Meson gxbb) - "friendlyarm,nanopi-k2" (Meson gxbb) diff --git a/dts/Bindings/arm/arch_timer.txt b/dts/Bindings/arm/arch_timer.txt deleted file mode 100644 index 68301b77e8..0000000000 --- a/dts/Bindings/arm/arch_timer.txt +++ /dev/null @@ -1,112 +0,0 @@ -* ARM architected timer - -ARM cores may have a per-core architected timer, which provides per-cpu timers, -or a memory mapped architected timer, which provides up to 8 frames with a -physical and optional virtual timer per frame. - -The per-core architected timer is attached to a GIC to deliver its -per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC -to deliver its interrupts via SPIs. - -** CP15 Timer node properties: - -- compatible : Should at least contain one of - "arm,armv7-timer" - "arm,armv8-timer" - -- interrupts : Interrupt list for secure, non-secure, virtual and - hypervisor timers, in that order. - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only where necessary to work around broken firmware which does not configure - CNTFRQ on all CPUs to a uniform correct value. Use of this property is - strongly discouraged; fix your firmware unless absolutely impossible. - -- always-on : a boolean property. If present, the timer is powered through an - always-on power domain, therefore it never loses context. - -- fsl,erratum-a008585 : A boolean property. Indicates the presence of - QorIQ erratum A-008585, which says that reading the counter is - unreliable unless the same value is returned by back-to-back reads. - This also affects writes to the tval register, due to the implicit - counter read. - -- hisilicon,erratum-161010101 : A boolean property. Indicates the - presence of Hisilicon erratum 161010101, which says that reading the - counters is unreliable in some cases, and reads may return a value 32 - beyond the correct value. This also affects writes to the tval - registers, due to the implicit counter read. - -** Optional properties: - -- arm,cpu-registers-not-fw-configured : Firmware does not initialize - any of the generic timer CPU registers, which contain their - architecturally-defined reset values. Only supported for 32-bit - systems which follow the ARMv7 architected reset values. - -- arm,no-tick-in-suspend : The main counter does not tick when the system is in - low-power system suspend on some SoCs. This behavior does not match the - Architecture Reference Manual's specification that the system counter "must - be implemented in an always-on power domain." - - -Example: - - timer { - compatible = "arm,cortex-a15-timer", - "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - clock-frequency = <100000000>; - }; - -** Memory mapped timer node properties: - -- compatible : Should at least contain "arm,armv7-timer-mem". - -- clock-frequency : The frequency of the main counter, in Hz. Should be present - only when firmware has not configured the MMIO CNTFRQ registers. - -- reg : The control frame base address. - -Note that #address-cells, #size-cells, and ranges shall be present to ensure -the CPU can address a frame's registers. - -A timer node has up to 8 frame sub-nodes, each with the following properties: - -- frame-number: 0 to 7. - -- interrupts : Interrupt list for physical and virtual timers in that order. - The virtual timer interrupt is optional. - -- reg : The first and second view base addresses in that order. The second view - base address is optional. - -- status : "disabled" indicates the frame is not available for use. Optional. - -Example: - - timer@f0000000 { - compatible = "arm,armv7-timer-mem"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = <0xf0000000 0x1000>; - clock-frequency = <50000000>; - - frame@f0001000 { - frame-number = <0> - interrupts = <0 13 0x8>, - <0 14 0x8>; - reg = <0xf0001000 0x1000>, - <0xf0002000 0x1000>; - }; - - frame@f0003000 { - frame-number = <1> - interrupts = <0 15 0x8>; - reg = <0xf0003000 0x1000>; - }; - }; diff --git a/dts/Bindings/arm/armv7m_systick.txt b/dts/Bindings/arm/armv7m_systick.txt deleted file mode 100644 index 7cf4a24601..0000000000 --- a/dts/Bindings/arm/armv7m_systick.txt +++ /dev/null @@ -1,26 +0,0 @@ -* ARMv7M System Timer - -ARMv7-M includes a system timer, known as SysTick. Current driver only -implements the clocksource feature. - -Required properties: -- compatible : Should be "arm,armv7m-systick" -- reg : The address range of the timer - -Required clocking property, have to be one of: -- clocks : The input clock of the timer -- clock-frequency : The rate in HZ in input of the ARM SysTick - -Examples: - -systick: timer@e000e010 { - compatible = "arm,armv7m-systick"; - reg = <0xe000e010 0x10>; - clocks = <&clk_systick>; -}; - -systick: timer@e000e010 { - compatible = "arm,armv7m-systick"; - reg = <0xe000e010 0x10>; - clock-frequency = <90000000>; -}; diff --git a/dts/Bindings/arm/bcm/brcm,bcm2835.txt b/dts/Bindings/arm/bcm/brcm,bcm2835.txt index 3e3efa046a..1e3e29a545 100644 --- a/dts/Bindings/arm/bcm/brcm,bcm2835.txt +++ b/dts/Bindings/arm/bcm/brcm,bcm2835.txt @@ -34,6 +34,10 @@ Raspberry Pi 3 Model B Required root node properties: compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; +Raspberry Pi 3 Model B+ +Required root node properties: +compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837"; + Raspberry Pi Compute Module Required root node properties: compatible = "raspberrypi,compute-module", "brcm,bcm2835"; diff --git a/dts/Bindings/arm/global_timer.txt b/dts/Bindings/arm/global_timer.txt deleted file mode 100644 index bdae3a8187..0000000000 --- a/dts/Bindings/arm/global_timer.txt +++ /dev/null @@ -1,27 +0,0 @@ - -* ARM Global Timer - Cortex-A9 are often associated with a per-core Global timer. - -** Timer node required properties: - -- compatible : should contain - * "arm,cortex-a5-global-timer" for Cortex-A5 global timers. - * "arm,cortex-a9-global-timer" for Cortex-A9 global - timers or any compatible implementation. Note: driver - supports versions r2p0 and above. - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the GT timer - register window. - -- clocks : Should be phandle to a clock. - -Example: - - timer@2c000600 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - clocks = <&arm_periph_clk>; - }; diff --git a/dts/Bindings/arm/mediatek/mediatek,g3dsys.txt b/dts/Bindings/arm/mediatek/mediatek,g3dsys.txt new file mode 100644 index 0000000000..7de43bf41f --- /dev/null +++ b/dts/Bindings/arm/mediatek/mediatek,g3dsys.txt @@ -0,0 +1,30 @@ +MediaTek g3dsys controller +============================ + +The MediaTek g3dsys controller provides various clocks and reset controller to +the GPU. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2701-g3dsys", "syscon": + for MT2701 SoC + - "mediatek,mt7623-g3dsys", "mediatek,mt2701-g3dsys", "syscon": + for MT7623 SoC +- #clock-cells: Must be 1 +- #reset-cells: Must be 1 + +The g3dsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +g3dsys: clock-controller@13000000 { + compatible = "mediatek,mt7623-g3dsys", + "mediatek,mt2701-g3dsys", + "syscon"; + reg = <0 0x13000000 0 0x200>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/dts/Bindings/arm/mrvl/timer.txt b/dts/Bindings/arm/mrvl/timer.txt deleted file mode 100644 index 9a6e251462..0000000000 --- a/dts/Bindings/arm/mrvl/timer.txt +++ /dev/null @@ -1,13 +0,0 @@ -* Marvell MMP Timer controller - -Required properties: -- compatible : Should be "mrvl,mmp-timer". -- reg : Address and length of the register set of timer controller. -- interrupts : Should be the interrupt number. - -Example: - timer0: timer@d4014000 { - compatible = "mrvl,mmp-timer"; - reg = <0xd4014000 0x100>; - interrupts = <13>; - }; diff --git a/dts/Bindings/arm/msm/timer.txt b/dts/Bindings/arm/msm/timer.txt deleted file mode 100644 index 5e10c34554..0000000000 --- a/dts/Bindings/arm/msm/timer.txt +++ /dev/null @@ -1,47 +0,0 @@ -* MSM Timer - -Properties: - -- compatible : Should at least contain "qcom,msm-timer". More specific - properties specify which subsystem the timers are paired with. - - "qcom,kpss-timer" - krait subsystem - "qcom,scss-timer" - scorpion subsystem - -- interrupts : Interrupts for the debug timer, the first general purpose - timer, and optionally a second general purpose timer, and - optionally as well, 2 watchdog interrupts, in that order. - -- reg : Specifies the base address of the timer registers. - -- clocks: Reference to the parent clocks, one per output clock. The parents - must appear in the same order as the clock names. - -- clock-names: The name of the clocks as free-form strings. They should be in - the same order as the clocks. - -- clock-frequency : The frequency of the debug timer and the general purpose - timer(s) in Hz in that order. - -Optional: - -- cpu-offset : per-cpu offset used when the timer is accessed without the - CPU remapping facilities. The offset is - cpu-offset + (0x10000 * cpu-nr). - -Example: - - timer@200a000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>, - <1 4 0x301>, - <1 5 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <19200000>, - <32768>; - clocks = <&sleep_clk>; - clock-names = "sleep"; - cpu-offset = <0x40000>; - }; diff --git a/dts/Bindings/arm/omap/timer.txt b/dts/Bindings/arm/omap/timer.txt deleted file mode 100644 index d02e27c764..0000000000 --- a/dts/Bindings/arm/omap/timer.txt +++ /dev/null @@ -1,44 +0,0 @@ -OMAP Timer bindings - -Required properties: -- compatible: Should be set to one of the below. Please note that - OMAP44xx devices have timer instances that are 100% - register compatible with OMAP3xxx devices as well as - newer timers that are not 100% register compatible. - So for OMAP44xx devices timer instances may use - different compatible strings. - - ti,omap2420-timer (applicable to OMAP24xx devices) - ti,omap3430-timer (applicable to OMAP3xxx/44xx devices) - ti,omap4430-timer (applicable to OMAP44xx devices) - ti,omap5430-timer (applicable to OMAP543x devices) - ti,am335x-timer (applicable to AM335x devices) - ti,am335x-timer-1ms (applicable to AM335x devices) - -- reg: Contains timer register address range (base address and - length). -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the OMAP device uses. -- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>", - where <X> is the instance number of the timer from the - HW spec. - -Optional properties: -- ti,timer-alwon: Indicates the timer is in an alway-on power domain. -- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in - addition to the ARM CPU. -- ti,timer-pwm: Indicates the timer can generate a PWM output. -- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device - and therefore cannot be used by the kernel. - -Example: - -timer12: timer@48304000 { - compatible = "ti,omap3430-timer"; - reg = <0x48304000 0x400>; - interrupts = <95>; - ti,hwmods = "timer12" - ti,timer-alwon; - ti,timer-secure; -}; diff --git a/dts/Bindings/arm/samsung/exynos-adc.txt b/dts/Bindings/arm/samsung/exynos-adc.txt deleted file mode 100644 index 6c49db7f8a..0000000000 --- a/dts/Bindings/arm/samsung/exynos-adc.txt +++ /dev/null @@ -1,103 +0,0 @@ -Samsung Exynos Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -Exynos4 and upward SoCs from Samsung. - -New driver handles the following -1. Supports ADC IF found on EXYNOS4412/EXYNOS5250 - and future SoCs from Samsung -2. Add ADC driver under iio/adc framework -3. Also adds the Documentation for device tree bindings - -Required properties: -- compatible: Must be "samsung,exynos-adc-v1" - for exynos4412/5250 and s5pv210 controllers. - Must be "samsung,exynos-adc-v2" for - future controllers. - Must be "samsung,exynos3250-adc" for - controllers compatible with ADC of Exynos3250. - Must be "samsung,exynos7-adc" for - the ADC in Exynos7 and compatibles - Must be "samsung,s3c2410-adc" for - the ADC in s3c2410 and compatibles - Must be "samsung,s3c2416-adc" for - the ADC in s3c2416 and compatibles - Must be "samsung,s3c2440-adc" for - the ADC in s3c2440 and compatibles - Must be "samsung,s3c2443-adc" for - the ADC in s3c2443 and compatibles - Must be "samsung,s3c6410-adc" for - the ADC in s3c6410 and compatibles -- reg: List of ADC register address range - - The base address and range of ADC register - - The base address and range of ADC_PHY register (every - SoC except for s3c24xx/s3c64xx ADC) -- interrupts: Contains the interrupt information for the timer. The - format is being dependent on which interrupt controller - the Samsung device uses. -- #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock bindings: handles to clocks specified - in "clock-names" property, in the same order. -- clock-names From common clock bindings: list of clock input names - used by ADC block: - - "adc" : ADC bus clock - - "sclk" : ADC special clock (only for Exynos3250 and - compatible ADC block) -- vdd-supply VDD input supply. - -- samsung,syscon-phandle Contains the PMU system controller node - (To access the ADC_PHY register on Exynos5250/5420/5800/3250) -Optional properties: -- has-touchscreen: If present, indicates that a touchscreen is - connected an usable. - -Note: child nodes can be added for auto probing from device tree. - -Example: adding device info in dtsi file - -adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&clock 303>; - clock-names = "adc"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: adding device info in dtsi file for Exynos3250 with additional sclk - -adc: adc@126c0000 { - compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; - reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; - #io-channel-cells = <1>; - io-channel-ranges; - - clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; - clock-names = "adc", "sclk"; - - vdd-supply = <&buck5_reg>; - samsung,syscon-phandle = <&pmu_system_controller>; -}; - -Example: Adding child nodes in dts file - -adc@12d10000 { - - /* NTC thermistor is a hwmon device */ - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 4>; - }; -}; - -Note: Does not apply to ADC driver under arch/arm/plat-samsung/ -Note: The child node can be added under the adc node or separately. diff --git a/dts/Bindings/arm/samsung/samsung-boards.txt b/dts/Bindings/arm/samsung/samsung-boards.txt index 14510b2154..bdadc3da95 100644 --- a/dts/Bindings/arm/samsung/samsung-boards.txt +++ b/dts/Bindings/arm/samsung/samsung-boards.txt @@ -21,8 +21,6 @@ Required root node properties: - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. - "samsung,tm2" - for Exynos5433-based Samsung TM2 board. - "samsung,tm2e" - for Exynos5433-based Samsung TM2E board. - - "samsung,sd5v1" - for Exynos5440-based Samsung board. - - "samsung,ssdk5440" - for Exynos5440-based Samsung board. * Other companies Exynos SoC based * FriendlyARM diff --git a/dts/Bindings/arm/shmobile.txt b/dts/Bindings/arm/shmobile.txt index d3d1df9783..d8cf740132 100644 --- a/dts/Bindings/arm/shmobile.txt +++ b/dts/Bindings/arm/shmobile.txt @@ -21,6 +21,8 @@ SoCs: compatible = "renesas,r8a7744" - RZ/G1E (R8A77450) compatible = "renesas,r8a7745" + - RZ/G1C (R8A77470) + compatible = "renesas,r8a77470" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" - R-Car H1 (R8A77790) @@ -45,6 +47,8 @@ SoCs: compatible = "renesas,r8a77970" - R-Car V3H (R8A77980) compatible = "renesas,r8a77980" + - R-Car E3 (R8A77990) + compatible = "renesas,r8a77990" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" @@ -67,6 +71,8 @@ Boards: compatible = "renesas,draak", "renesas,r8a77995" - Eagle (RTP0RC77970SEB0010S) compatible = "renesas,eagle", "renesas,r8a77970" + - Ebisu (RTP0RC77990SEB0010S) + compatible = "renesas,ebisu", "renesas,r8a77990" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -78,6 +84,8 @@ Boards: compatible = "renesas,h3ulcb", "renesas,r8a7795" - Henninger compatible = "renesas,henninger", "renesas,r8a7791" + - iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) + compatible = "iwave,g23s", "renesas,r8a77470" - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) compatible = "iwave,g22d", "iwave,g22m", "renesas,r8a7745" - iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) @@ -108,7 +116,7 @@ Boards: compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) compatible = "renesas,salvator-x", "renesas,r8a7796" - - Salvator-X (RTP0RC7796SIPB0011S (M3N)) + - Salvator-X (RTP0RC7796SIPB0011S (M3-N)) compatible = "renesas,salvator-x", "renesas,r8a77965" - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) compatible = "renesas,salvator-xs", "renesas,r8a7795" @@ -124,6 +132,8 @@ Boards: compatible = "renesas,sk-rzg1m", "renesas,r8a7743" - Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) compatible = "renesas,stout", "renesas,r8a7790" + - V3HSK (Y-ASK-RCAR-V3H-WS10) + compatible = "renesas,v3hsk", "renesas,r8a77980" - V3MSK (Y-ASK-RCAR-V3M-WS10) compatible = "renesas,v3msk", "renesas,r8a77970" - Wheat (RTP0RC7792ASKB0000JE) diff --git a/dts/Bindings/arm/spear-timer.txt b/dts/Bindings/arm/spear-timer.txt deleted file mode 100644 index c0017221cf..0000000000 --- a/dts/Bindings/arm/spear-timer.txt +++ /dev/null @@ -1,18 +0,0 @@ -* SPEAr ARM Timer - -** Timer node required properties: - -- compatible : Should be: - "st,spear-timer" -- reg: Address range of the timer registers -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device -- interrupt: Should contain the timer interrupt number - -Example: - - timer@f0000000 { - compatible = "st,spear-timer"; - reg = <0xf0000000 0x400>; - interrupts = <2>; - }; diff --git a/dts/Bindings/arm/stm32/stm32-syscon.txt b/dts/Bindings/arm/stm32/stm32-syscon.txt new file mode 100644 index 0000000000..99980aee26 --- /dev/null +++ b/dts/Bindings/arm/stm32/stm32-syscon.txt @@ -0,0 +1,14 @@ +STMicroelectronics STM32 Platforms System Controller + +Properties: + - compatible : should contain two values. First value must be : + - " st,stm32mp157-syscfg " - for stm32mp157 based SoCs, + second value must be always "syscon". + - reg : offset and length of the register set. + + Example: + syscfg: syscon@50020000 { + compatible = "st,stm32mp157-syscfg", "syscon"; + reg = <0x50020000 0x400>; + }; + diff --git a/dts/Bindings/arm/stm32.txt b/dts/Bindings/arm/stm32/stm32.txt index 6808ed9ddf..6808ed9ddf 100644 --- a/dts/Bindings/arm/stm32.txt +++ b/dts/Bindings/arm/stm32/stm32.txt diff --git a/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt b/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt deleted file mode 100644 index f9632bacbd..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra20-mc.txt +++ /dev/null @@ -1,16 +0,0 @@ -NVIDIA Tegra20 MC(Memory Controller) - -Required properties: -- compatible : "nvidia,tegra20-mc" -- reg : Should contain 2 register ranges(address and length); see the - example below. Note that the MC registers are interleaved with the - GART registers, and hence must be represented as multiple ranges. -- interrupts : Should contain MC General interrupt. - -Example: - memory-controller@7000f000 { - compatible = "nvidia,tegra20-mc"; - reg = <0x7000f000 0x024 - 0x7000f03c 0x3c4>; - interrupts = <0 77 0x04>; - }; diff --git a/dts/Bindings/arm/tegra/nvidia,tegra30-mc.txt b/dts/Bindings/arm/tegra/nvidia,tegra30-mc.txt deleted file mode 100644 index bdf1a61242..0000000000 --- a/dts/Bindings/arm/tegra/nvidia,tegra30-mc.txt +++ /dev/null @@ -1,18 +0,0 @@ -NVIDIA Tegra30 MC(Memory Controller) - -Required properties: -- compatible : "nvidia,tegra30-mc" -- reg : Should contain 4 register ranges(address and length); see the - example below. Note that the MC registers are interleaved with the - SMMU registers, and hence must be represented as multiple ranges. -- interrupts : Should contain MC General interrupt. - -Example: - memory-controller { - compatible = "nvidia,tegra30-mc"; - reg = <0x7000f000 0x010 - 0x7000f03c 0x1b4 - 0x7000f200 0x028 - 0x7000f284 0x17c>; - interrupts = <0 77 0x04>; - }; diff --git a/dts/Bindings/arm/twd.txt b/dts/Bindings/arm/twd.txt deleted file mode 100644 index 383ea19c2b..0000000000 --- a/dts/Bindings/arm/twd.txt +++ /dev/null @@ -1,53 +0,0 @@ -* ARM Timer Watchdog - -ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core -Timer-Watchdog (aka TWD), which provides both a per-cpu local timer -and watchdog. - -The TWD is usually attached to a GIC to deliver its two per-processor -interrupts. - -** Timer node required properties: - -- compatible : Should be one of: - "arm,cortex-a9-twd-timer" - "arm,cortex-a5-twd-timer" - "arm,arm11mp-twd-timer" - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the TWD timer - register window. - -Optional - -- always-on : a boolean property. If present, the timer is powered through - an always-on power domain, therefore it never loses context. - -Example: - - twd-timer@2c000600 { - compatible = "arm,arm11mp-twd-timer""; - reg = <0x2c000600 0x20>; - interrupts = <1 13 0xf01>; - }; - -** Watchdog node properties: - -- compatible : Should be one of: - "arm,cortex-a9-twd-wdt" - "arm,cortex-a5-twd-wdt" - "arm,arm11mp-twd-wdt" - -- interrupts : One interrupt to each core - -- reg : Specify the base address and the size of the TWD watchdog - register window. - -Example: - - twd-watchdog@2c000620 { - compatible = "arm,arm11mp-twd-wdt"; - reg = <0x2c000620 0x20>; - interrupts = <1 14 0xf01>; - }; diff --git a/dts/Bindings/arm/ux500/boards.txt b/dts/Bindings/arm/ux500/boards.txt index 7334c24625..0fa429534f 100644 --- a/dts/Bindings/arm/ux500/boards.txt +++ b/dts/Bindings/arm/ux500/boards.txt @@ -26,7 +26,7 @@ interrupt-controller: see binding for interrupt-controller/arm,gic.txt timer: - see binding for arm/twd.txt + see binding for timer/arm,twd.txt clocks: see binding for clocks/ux500.txt diff --git a/dts/Bindings/arm/vt8500/via,vt8500-timer.txt b/dts/Bindings/arm/vt8500/via,vt8500-timer.txt deleted file mode 100644 index 901c73f0d8..0000000000 --- a/dts/Bindings/arm/vt8500/via,vt8500-timer.txt +++ /dev/null @@ -1,15 +0,0 @@ -VIA/Wondermedia VT8500 Timer ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-timer" -- reg : Should contain 1 register ranges(address and length) -- interrupts : interrupt for the timer - -Example: - - timer@d8130100 { - compatible = "via,vt8500-timer"; - reg = <0xd8130100 0x28>; - interrupts = <36>; - }; |