summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/ata/ahci-platform.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/ata/ahci-platform.txt')
-rw-r--r--dts/Bindings/ata/ahci-platform.txt79
1 files changed, 0 insertions, 79 deletions
diff --git a/dts/Bindings/ata/ahci-platform.txt b/dts/Bindings/ata/ahci-platform.txt
deleted file mode 100644
index 77091a2776..0000000000
--- a/dts/Bindings/ata/ahci-platform.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-It is possible, but not required, to represent each port as a sub-node.
-It allows to enable each port independently when dealing with multiple
-PHYs.
-
-Required properties:
-- compatible : compatible string, one of:
- - "brcm,iproc-ahci"
- - "hisilicon,hisi-ahci"
- - "cavium,octeon-7130-ahci"
- - "ibm,476gtr-ahci"
- - "marvell,armada-380-ahci"
- - "marvell,armada-3700-ahci"
- - "snps,dwc-ahci"
- - "snps,spear-ahci"
- - "generic-ahci"
-- interrupts : <interrupt mapping for SATA IRQ>
-- reg : <registers mapping>
-
-Please note that when using "generic-ahci" you must also specify a SoC specific
-compatible:
- compatible = "manufacturer,soc-model-ahci", "generic-ahci";
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-- clocks : a list of phandle + clock specifier pairs
-- resets : a list of phandle + reset specifier pairs
-- target-supply : regulator for SATA target power
-- phy-supply : regulator for PHY power
-- phys : reference to the SATA PHY node
-- phy-names : must be "sata-phy"
-- ahci-supply : regulator for AHCI controller
-- ports-implemented : Mask that indicates which ports that the HBA supports
- are available for software to use. Useful if PORTS_IMPL
- is not programmed by the BIOS, which is true with
- some embedded SOC's.
-
-Required properties when using sub-nodes:
-- #address-cells : number of cells to encode an address
-- #size-cells : number of cells representing the size of an address
-
-Sub-nodes required properties:
-- reg : the port number
-And at least one of the following properties:
-- phys : reference to the SATA PHY node
-- target-supply : regulator for SATA target power
-
-Examples:
- sata@ffe08000 {
- compatible = "snps,spear-ahci";
- reg = <0xffe08000 0x1000>;
- interrupts = <115>;
- };
-
-With sub-nodes:
- sata@f7e90000 {
- compatible = "marvell,berlin2q-achi", "generic-ahci";
- reg = <0xe90000 0x1000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SATA>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- sata0: sata-port@0 {
- reg = <0>;
- phys = <&sata_phy 0>;
- target-supply = <&reg_sata0>;
- };
-
- sata1: sata-port@1 {
- reg = <1>;
- phys = <&sata_phy 1>;
- target-supply = <&reg_sata1>;;
- };
- };