3 files changed, 56 insertions, 0 deletions
diff --git a/dts/Bindings/ata/ahci-ceva.txt b/dts/Bindings/ata/ahci-ceva.txt
new file mode 100644
index 0000000000..7ca8b976c1
--- /dev/null
+++ b/dts/Bindings/ata/ahci-ceva.txt
@@ -0,0 +1,20 @@
+Binding for CEVA AHCI SATA Controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register area.
+  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
+  - clocks: Input clock specifier. Refer to common clock bindings.
+  - interrupts: Interrupt specifier. Refer to interrupt binding.
+
+Optional properties:
+  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
+
+Examples:
+	ahci@fd0c0000 {
+		compatible = "ceva,ahci-1v84";
+		reg = <0xfd0c0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 133 4>;
+		clocks = <&clkc SATA_CLK_ID>;
+		ceva,broken-gen2;
+	};
diff --git a/dts/Bindings/ata/ahci-platform.txt b/dts/Bindings/ata/ahci-platform.txt
index c2340eeeb9..a2321819e7 100644
--- a/dts/Bindings/ata/ahci-platform.txt
+++ b/dts/Bindings/ata/ahci-platform.txt
@@ -16,6 +16,8 @@ Required properties:
   - "snps,dwc-ahci"
   - "snps,exynos5440-ahci"
   - "snps,spear-ahci"
+  - "fsl,qoriq-ahci" : for qoriq series socs which include ls1021, ls2085, etc.
+  - "fsl,<chip>-ahci" : chip could be ls1021, ls2085 etc.
   - "generic-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
diff --git a/dts/Bindings/ata/brcm,sata-brcmstb.txt b/dts/Bindings/ata/brcm,sata-brcmstb.txt
new file mode 100644
index 0000000000..20ac9bbfa1
--- /dev/null
+++ b/dts/Bindings/ata/brcm,sata-brcmstb.txt
@@ -0,0 +1,34 @@
+* Broadcom SATA3 AHCI Controller for STB
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible         : compatible list, may contain "brcm,bcm7445-ahci" and/or
+                       "brcm,sata3-ahci"
+- reg                : register mappings for AHCI and SATA_TOP_CTRL
+- reg-names          : "ahci" and "top-ctrl"
+- interrupts         : interrupt mapping for SATA IRQ
+
+Also see ahci-platform.txt.
+
+Example:
+
+	sata@f045a000 {
+		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+		reg-names = "ahci", "top-ctrl";
+		interrupts = <0 30 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0: sata-port@0 {
+			reg = <0>;
+			phys = <&sata_phy 0>;
+		};
+
+		sata1: sata-port@1 {
+			reg = <1>;
+			phys = <&sata_phy 1>;
+		};
+	};