summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/bus/mvebu-mbus.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/bus/mvebu-mbus.txt')
-rw-r--r--dts/Bindings/bus/mvebu-mbus.txt276
1 files changed, 276 insertions, 0 deletions
diff --git a/dts/Bindings/bus/mvebu-mbus.txt b/dts/Bindings/bus/mvebu-mbus.txt
new file mode 100644
index 0000000000..7586fb68c0
--- /dev/null
+++ b/dts/Bindings/bus/mvebu-mbus.txt
@@ -0,0 +1,276 @@
+
+* Marvell MBus
+
+Required properties:
+
+- compatible: Should be set to one of the following:
+ marvell,armada370-mbus
+ marvell,armadaxp-mbus
+ marvell,armada370-mbus
+ marvell,armadaxp-mbus
+ marvell,kirkwood-mbus
+ marvell,dove-mbus
+ marvell,orion5x-88f5281-mbus
+ marvell,orion5x-88f5182-mbus
+ marvell,orion5x-88f5181-mbus
+ marvell,orion5x-88f6183-mbus
+ marvell,mv78xx0-mbus
+
+- address-cells: Must be '2'. The first cell for the MBus ID encoding,
+ the second cell for the address offset within the window.
+
+- size-cells: Must be '1'.
+
+- ranges: Must be set up to provide a proper translation for each child.
+ See the examples below.
+
+- controller: Contains a single phandle referring to the MBus controller
+ node. This allows to specify the node that contains the
+ registers that control the MBus, which is typically contained
+ within the internal register window (see below).
+
+Optional properties:
+
+- pcie-mem-aperture: This optional property contains the aperture for
+ the memory region of the PCIe driver.
+ If it's defined, it must encode the base address and
+ size for the address decoding windows allocated for
+ the PCIe memory region.
+
+- pcie-io-aperture: Just as explained for the above property, this
+ optional property contains the aperture for the
+ I/O region of the PCIe driver.
+
+* Marvell MBus controller
+
+Required properties:
+
+- compatible: Should be set to "marvell,mbus-controller".
+
+- reg: Device's register space.
+ Two entries are expected (see the examples below):
+ the first one controls the devices decoding window and
+ the second one controls the SDRAM decoding window.
+
+Example:
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ internal-regs {
+ compatible = "simple-bus";
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ /* more children ...*/
+ };
+ };
+
+** MBus address decoding window specification
+
+The MBus children address space is comprised of two cells: the first one for
+the window ID and the second one for the offset within the window.
+In order to allow to describe valid and non-valid window entries, the
+following encoding is used:
+
+ 0xSIAA0000 0x00oooooo
+
+Where:
+
+ S = 0x0 for a MBus valid window
+ S = 0xf for a non-valid window (see below)
+
+If S = 0x0, then:
+
+ I = 4-bit window target ID
+ AA = windpw attribute
+
+If S = 0xf, then:
+
+ I = don't care
+ AA = 1 for internal register
+
+Following the above encoding, for each ranges entry for a MBus valid window
+(S = 0x0), an address decoding window is allocated. On the other side,
+entries for translation that do not correspond to valid windows (S = 0xf)
+are skipped.
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+
+ ranges = <0xf0010000 0 0 0xd0000000 0x100000
+ 0x01e00000 0 0 0xfff00000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <0x01e00000 0 0x100000>;
+ };
+
+ /* other children */
+ ...
+
+ internal-regs {
+ compatible = "simple-bus";
+ ranges = <0 0xf0010000 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ /* more children ...*/
+ };
+ };
+
+In the shown example, the translation entry in the 'ranges' property is what
+makes the MBus driver create a static decoding window for the corresponding
+given child device. Note that the binding does not require child nodes to be
+present. Of course, child nodes are needed to probe the devices.
+
+Since each window is identified by its target ID and attribute ID there's
+a special macro that can be use to simplify the translation entries:
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+Using this macro, the above example would be:
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+
+ ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+ };
+
+ /* other children */
+ ...
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ /* other children */
+ ...
+ };
+ };
+
+
+** About the window base address
+
+Remember the MBus controller allows a great deal of flexibility for choosing
+the decoding window base address. When planning the device tree layout it's
+possible to choose any address as the base address, provided of course there's
+a region large enough available, and with the required alignment.
+
+Yet in other words: there's nothing preventing us from setting a base address
+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
+unused.
+
+** Window allocation policy
+
+The mbus-node ranges property defines a set of mbus windows that are expected
+to be set by the operating system and that are guaranteed to be free of overlaps
+with one another or with the system memory ranges.
+
+Each entry in the property refers to exactly one window. If the operating system
+choses to use a different set of mbus windows, it must ensure that any address
+translations performed from downstream devices are adapted accordingly.
+
+The operating system may insert additional mbus windows that do not conflict
+with the ones listed in the ranges, e.g. for mapping PCIe devices.
+As a special case, the internal register window must be set up by the boot
+loader at the address listed in the ranges property, since access to that region
+is needed to set up the other windows.
+
+** Example
+
+See the example below, where a more complete device tree is shown:
+
+ soc {
+ compatible = "marvell,armadaxp-mbus", "simple-bus";
+ controller = <&mbusc>;
+
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
+ devbus-bootcs {
+ status = "okay";
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
+
+ /* NOR */
+ nor {
+ compatible = "cfi-flash";
+ reg = <0 0x8000000>;
+ bank-width = <2>;
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ status = "okay";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
+ 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
+
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ reg = <0x20000 0x100>, <0x20180 0x20>;
+ };
+
+ interrupt-controller@20000 {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ };
+ };
+ };