summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/bus/ti-sysc.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/bus/ti-sysc.yaml')
-rw-r--r--dts/Bindings/bus/ti-sysc.yaml215
1 files changed, 215 insertions, 0 deletions
diff --git a/dts/Bindings/bus/ti-sysc.yaml b/dts/Bindings/bus/ti-sysc.yaml
new file mode 100644
index 0000000000..6d7bca6c13
--- /dev/null
+++ b/dts/Bindings/bus/ti-sysc.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interconnect target module
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+description:
+ Texas Instruments SoCs can have a generic interconnect target module
+ for devices connected to various interconnects such as L3 interconnect
+ using Arteris NoC, and L4 interconnect using Sonics s3220. This module
+ is mostly used for interaction between module and Power, Reset and Clock
+ Manager PRCM. It participates in the OCP Disconnect Protocol, but other
+ than that it is mostly independent of the interconnect.
+
+ Each interconnect target module can have one or more devices connected to
+ it. There is a set of control registers for managing the interconnect target
+ module clocks, idle modes and interconnect level resets.
+
+ The interconnect target module control registers are sprinkled into the
+ unused register address space of the first child device IP block managed by
+ the interconnect target module. Typically the register names are REVISION,
+ SYSCONFIG and SYSSTATUS.
+
+properties:
+ $nodename:
+ pattern: "^target-module(@[0-9a-f]+)?$"
+
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,sysc-omap2
+ - ti,sysc-omap4
+ - ti,sysc-omap4-simple
+ - ti,sysc-omap2-timer
+ - ti,sysc-omap4-timer
+ - ti,sysc-omap3430-sr
+ - ti,sysc-omap3630-sr
+ - ti,sysc-omap4-sr
+ - ti,sysc-omap3-sham
+ - ti,sysc-omap-aes
+ - ti,sysc-mcasp
+ - ti,sysc-dra7-mcasp
+ - ti,sysc-usb-host-fs
+ - ti,sysc-dra7-mcan
+ - ti,sysc-pruss
+ - const: ti,sysc
+ - items:
+ - const: ti,sysc
+
+ reg:
+ description:
+ Interconnect target module control registers consisting of
+ REVISION, SYSCONFIG and SYSSTATUS registers as defined in the
+ Technical Reference Manual for the SoC.
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ description:
+ Interconnect target module control register names consisting
+ of "rev", "sysc" and "syss".
+ oneOf:
+ - minItems: 1
+ items:
+ - const: rev
+ - const: sysc
+ - const: syss
+ - items:
+ - const: rev
+ - const: syss
+ - enum: [ sysc, syss ]
+
+ power-domains:
+ description: Target module power domain if available.
+ maxItems: 1
+
+ clocks:
+ description:
+ Target module clocks consisting of one functional clock, one
+ interface clock, and up to 8 module specific optional clocks.
+ Some modules may have only the functional clock, and some have
+ no configurable clocks.
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ description:
+ Target module clock names like "fck", "ick", "optck1", "optck2"
+ if the clocks are configurable.
+ oneOf:
+ - enum: [ ick, fck, sys_clk ]
+ - items:
+ - const: fck
+ - enum: [ ick, dbclk, osc, sys_clk, dss_clk, ahclkx ]
+ - items:
+ - const: fck
+ - const: phy-clk
+ - const: phy-clk-div
+ - items:
+ - const: fck
+ - const: hdmi_clk
+ - const: sys_clk
+ - const: tv_clk
+ - items:
+ - const: fck
+ - const: ahclkx
+ - const: ahclkr
+
+ resets:
+ description:
+ Target module reset bit in the RSTCTRL register if wired for the module.
+ Note that the other reset bits should be mapped for the child device
+ driver to use.
+ maxItems: 1
+
+ reset-names:
+ description:
+ Target module reset names in the RSTCTRL register, typically named
+ "rstctrl" if only one reset bit is wired for the module.
+ items:
+ - const: rstctrl
+
+ '#address-cells':
+ enum: [ 1, 2 ]
+
+ '#size-cells':
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ dma-ranges: true
+
+ ti,sysc-mask:
+ description: Mask of supported register bits for the SYSCONFIG register
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,sysc-midle:
+ description: List of hardware supported idle modes
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ ti,sysc-sidle:
+ description: List of hardware supported idle modes
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ ti,syss-mask:
+ description: Mask of supported register bits for the SYSSTATUS register
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,sysc-delay-us:
+ description: Delay needed after OCP softreset before accessing SYCONFIG
+ default: 0
+ minimum: 0
+ maximum: 2
+
+ ti,no-reset-on-init:
+ description: Interconnect target module shall not be reset at init
+ type: boolean
+
+ ti,no-idle-on-init:
+ description: Interconnect target module shall not be idled at init
+ type: boolean
+
+ ti,no-idle:
+ description: Interconnect target module shall not be idled
+ type: boolean
+
+ ti,hwmods:
+ description: Interconnect module name to use with legacy hwmod data
+ $ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - ranges
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ #include <dt-bindings/bus/ti-sysc.h>
+ #include <dt-bindings/clock/omap4.h>
+
+ target-module@2b000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x2b400 0x4>,
+ <0x2b404 0x4>,
+ <0x2b408 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2b000 0x1000>;
+ };