summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/c6x/dscr.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/c6x/dscr.txt')
-rw-r--r--dts/Bindings/c6x/dscr.txt127
1 files changed, 0 insertions, 127 deletions
diff --git a/dts/Bindings/c6x/dscr.txt b/dts/Bindings/c6x/dscr.txt
deleted file mode 100644
index 92672235de..0000000000
--- a/dts/Bindings/c6x/dscr.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Device State Configuration Registers
-------------------------------------
-
-TI C6X SoCs contain a region of miscellaneous registers which provide various
-function for SoC control or status. Details vary considerably among from SoC
-to SoC with no two being alike.
-
-In general, the Device State Configuration Registers (DSCR) will provide one or
-more configuration registers often protected by a lock register where one or
-more key values must be written to a lock register in order to unlock the
-configuration register for writes. These configuration register may be used to
-enable (and disable in some cases) SoC pin drivers, select peripheral clock
-sources (internal or pin), etc. In some cases, a configuration register is
-write once or the individual bits are write once. In addition to device config,
-the DSCR block may provide registers which are used to reset peripherals,
-provide device ID information, provide ethernet MAC addresses, as well as other
-miscellaneous functions.
-
-For device state control (enable/disable), each device control is assigned an
-id which is used by individual device drivers to control the state as needed.
-
-Required properties:
-
-- compatible: must be "ti,c64x+dscr"
-- reg: register area base and size
-
-Optional properties:
-
- NOTE: These are optional in that not all SoCs will have all properties. For
- SoCs which do support a given property, leaving the property out of the
- device tree will result in reduced functionality or possibly driver
- failure.
-
-- ti,dscr-devstat
- offset of the devstat register
-
-- ti,dscr-silicon-rev
- offset, start bit, and bitsize of silicon revision field
-
-- ti,dscr-rmii-resets
- offset and bitmask of RMII reset field. May have multiple tuples if more
- than one ethernet port is available.
-
-- ti,dscr-locked-regs
- possibly multiple tuples describing registers which are write protected by
- a lock register. Each tuple consists of the register offset, lock register
- offsset, and the key value used to unlock the register.
-
-- ti,dscr-kick-regs
- offset and key values of two "kick" registers used to write protect other
- registers in DSCR. On SoCs using kick registers, the first key must be
- written to the first kick register and the second key must be written to
- the second register before other registers in the area are write-enabled.
-
-- ti,dscr-mac-fuse-regs
- MAC addresses are contained in two registers. Each element of a MAC address
- is contained in a single byte. This property has two tuples. Each tuple has
- a register offset and four cells representing bytes in the register from
- most significant to least. The value of these four cells is the MAC byte
- index (1-6) of the byte within the register. A value of 0 means the byte
- is unused in the MAC address.
-
-- ti,dscr-devstate-ctl-regs
- This property describes the bitfields used to control the state of devices.
- Each tuple describes a range of identical bitfields used to control one or
- more devices (one bitfield per device). The layout of each tuple is:
-
- start_id num_ids reg enable disable start_bit nbits
-
- Where:
- start_id is device id for the first device control in the range
- num_ids is the number of device controls in the range
- reg is the offset of the register holding the control bits
- enable is the value to enable a device
- disable is the value to disable a device (0xffffffff if cannot disable)
- start_bit is the bit number of the first bit in the range
- nbits is the number of bits per device control
-
-- ti,dscr-devstate-stat-regs
- This property describes the bitfields used to provide device state status
- for device states controlled by the DSCR. Each tuple describes a range of
- identical bitfields used to provide status for one or more devices (one
- bitfield per device). The layout of each tuple is:
-
- start_id num_ids reg enable disable start_bit nbits
-
- Where:
- start_id is device id for the first device status in the range
- num_ids is the number of devices covered by the range
- reg is the offset of the register holding the status bits
- enable is the value indicating device is enabled
- disable is the value indicating device is disabled
- start_bit is the bit number of the first bit in the range
- nbits is the number of bits per device status
-
-- ti,dscr-privperm
- Offset and default value for register used to set access privilege for
- some SoC devices.
-
-
-Example:
-
- device-state-config-regs@2a80000 {
- compatible = "ti,c64x+dscr";
- reg = <0x02a80000 0x41000>;
-
- ti,dscr-devstat = <0>;
- ti,dscr-silicon-rev = <8 28 0xf>;
- ti,dscr-rmii-resets = <0x40020 0x00040000>;
-
- ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
- ti,dscr-devstate-ctl-regs =
- <0 12 0x40008 1 0 0 2
- 12 1 0x40008 3 0 30 2
- 13 2 0x4002c 1 0xffffffff 0 1>;
- ti,dscr-devstate-stat-regs =
- <0 10 0x40014 1 0 0 3
- 10 2 0x40018 1 0 0 3>;
-
- ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
- 0x704 5 6 0 0>;
-
- ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
-
- ti,dscr-kick-regs = <0x38 0x83E70B13
- 0x3c 0x95A4F1E0>;
- };