summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/clock/amlogic,gxbb-aoclkc.txt')
-rw-r--r--dts/Bindings/clock/amlogic,gxbb-aoclkc.txt23
1 files changed, 16 insertions, 7 deletions
diff --git a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
index a55d31b48d..786dc39ca9 100644
--- a/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
+++ b/dts/Bindings/clock/amlogic,gxbb-aoclkc.txt
@@ -5,9 +5,11 @@ controllers within the Always-On part of the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-aoclkc"
-- reg: physical base address of the clock controller and length of memory
- mapped region.
+- compatible: value should be different for each SoC family as :
+ - GXBB (S905) : "amlogic,meson-gxbb-aoclkc"
+ - GXL (S905X, S905D) : "amlogic,meson-gxl-aoclkc"
+ - GXM (S912) : "amlogic,meson-gxm-aoclkc"
+ followed by the common "amlogic,meson-gx-aoclkc"
- #clock-cells: should be 1.
@@ -23,14 +25,22 @@ to specify the reset which they consume. All available resets are defined as
preprocessor macros in the dt-bindings/reset/gxbb-aoclkc.h header and can be
used in device tree sources.
+Parent node should have the following properties :
+- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
+- reg: base address and size of the AO system control register space.
+
Example: AO Clock controller node:
- clkc_AO: clock-controller@040 {
- compatible = "amlogic,gxbb-aoclkc";
- reg = <0x0 0x040 0x0 0x4>;
+ao_sysctrl: sys-ctrl@0 {
+ compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ reg = <0x0 0x0 0x0 0x100>;
+
+ clkc_AO: clock-controller {
+ compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
#clock-cells = <1>;
#reset-cells = <1>;
};
+};
Example: UART controller node that consumes the clock and reset generated
by the clock controller:
@@ -41,5 +51,4 @@ Example: UART controller node that consumes the clock and reset generated
interrupts = <0 90 1>;
clocks = <&clkc_AO CLKID_AO_UART1>;
resets = <&clkc_AO RESET_AO_UART1>;
- status = "disabled";
};