summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/clock/at91-clock.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/clock/at91-clock.txt')
-rw-r--r--dts/Bindings/clock/at91-clock.txt51
1 files changed, 39 insertions, 12 deletions
diff --git a/dts/Bindings/clock/at91-clock.txt b/dts/Bindings/clock/at91-clock.txt
index 51c259a..8f8f950 100644
--- a/dts/Bindings/clock/at91-clock.txt
+++ b/dts/Bindings/clock/at91-clock.txt
@@ -17,14 +17,13 @@ Required properties:
"atmel,at91sam9x5-clk-slow-rc-osc":
at91 internal slow RC oscillator
- "atmel,at91rm9200-pmc" or
- "atmel,at91sam9g45-pmc" or
- "atmel,at91sam9n12-pmc" or
- "atmel,at91sam9x5-pmc" or
- "atmel,sama5d3-pmc":
+ "atmel,<chip>-pmc":
at91 PMC (Power Management Controller)
All at91 specific clocks (clocks defined below) must be child
node of the PMC node.
+ <chip> can be: at91rm9200, at91sam9260, at91sam9261,
+ at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
+ sama5d2, sama5d3 or sama5d4.
"atmel,at91sam9x5-clk-slow" (under sckc node)
or
@@ -91,6 +90,9 @@ Required properties:
at91 audio pll output on AUDIOPLLCLK that feeds the PMC
and can be used by peripheral clock or generic clock
+ "atmel,sama5d2-clk-i2s-mux" (under pmc node):
+ at91 I2S clock source selection
+
Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
@@ -180,7 +182,6 @@ For example:
};
Required properties for main clock internal RC oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- clock-frequency : define the internal RC oscillator frequency.
@@ -197,7 +198,6 @@ For example:
};
Required properties for main clock oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main osc source clk sources (see atmel datasheet).
@@ -218,7 +218,6 @@ For example:
};
Required properties for main clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main clk sources (see atmel datasheet).
@@ -233,7 +232,6 @@ For example:
};
Required properties for master clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<3>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the master clock sources (see atmel datasheet) phandles.
@@ -292,7 +290,6 @@ For example:
Required properties for pll clocks:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<1>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock phandle.
@@ -348,7 +345,6 @@ For example:
};
Required properties for programmable clocks:
-- interrupt-parent : must reference the PMC node.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the programmable clock source phandles.
@@ -451,7 +447,6 @@ For example:
Required properties for utmi clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock source phandle.
@@ -507,3 +502,35 @@ For example:
atmel,clk-output-range = <0 83000000>;
};
};
+
+Required properties for I2S mux clocks:
+- #size-cells : shall be 0 (reg is used to encode I2S bus id).
+- #address-cells : shall be 1 (reg is used to encode I2S bus id).
+- name: device tree node describing a specific mux clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * clocks : shall be the mux clock parent phandles; shall be 2 phandles:
+ peripheral and generated clock; the first phandle shall belong to the
+ peripheral clock and the second one shall belong to the generated
+ clock; "clock-indices" property can be user to specify
+ the correct order.
+ * reg: I2S bus id of the corresponding mux clock.
+ e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
+
+For example:
+ i2s_clkmux {
+ compatible = "atmel,sama5d2-clk-i2s-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2s0muxck: i2s0_muxclk {
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ #clock-cells = <0>;
+ reg = <0>;
+ };
+
+ i2s1muxck: i2s1_muxclk {
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ #clock-cells = <0>;
+ reg = <1>;
+ };
+ };