1 files changed, 0 insertions, 86 deletions
diff --git a/dts/Bindings/clock/exynos4-clock.txt b/dts/Bindings/clock/exynos4-clock.txt
deleted file mode 100644
index 17bb113653..0000000000
--- a/dts/Bindings/clock/exynos4-clock.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-* Samsung Exynos4 Clock Controller
-
-The Exynos4 clock controller generates and supplies clock to various controllers
-within the Exynos4 SoC. The clock binding described here is applicable to all
-SoC's in the Exynos4 family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
-  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos4.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4210-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP)
-subsystem. Registers for those clocks are located in the ISP power domain.
-Because those registers are also located in a different memory region than
-the main clock controller, a separate clock controller has to be defined for
-handling them.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos4412-isp-clock".
-
-- reg: physical base address of the ISP clock controller and length of memory
-  mapped region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-  from common clock bindings, should point to CLK_ACLK200 and
-  CLK_ACLK400_MCUISP clocks from the main clock controller.
-
-- clock-names: list of the clock controller input clock names,
-  as described in clock-bindings.txt, should be "aclk200" and
-  "aclk400_mcuisp".
-
-- power-domains: a phandle to ISP power domain node as described by
-  generic PM domain bindings.
-
-Example 3: The clock controllers bindings for Exynos4412 SoCs.
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4412-clock";
-		reg = <0x10030000 0x18000>;
-		#clock-cells = <1>;
-	};
-
-	isp_clock: clock-controller@10048000 {
-		compatible = "samsung,exynos4412-isp-clock";
-		reg = <0x10048000 0x1000>;
-		#clock-cells = <1>;
-		power-domains = <&pd_isp>;
-		clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
-		clock-names = "aclk200", "aclk400_mcuisp";
-	};