1 files changed, 0 insertions, 92 deletions
diff --git a/dts/Bindings/clock/idt,versaclock5.txt b/dts/Bindings/clock/idt,versaclock5.txt
deleted file mode 100644
index bcff681a4b..0000000000
--- a/dts/Bindings/clock/idt,versaclock5.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Binding for IDT VersaClock 5,6 programmable i2c clock generators.
-
-The IDT VersaClock 5 and VersaClock 6 are programmable i2c clock
-generators providing from 3 to 12 output clocks.
-
-==I2C device node==
-
-Required properties:
-- compatible:	shall be one of
-		"idt,5p49v5923"
-		"idt,5p49v5925"
-		"idt,5p49v5933"
-		"idt,5p49v5935"
-		"idt,5p49v6901"
-		"idt,5p49v6965"
-- reg:		i2c device address, shall be 0x68 or 0x6a.
-- #clock-cells:	from common clock binding; shall be set to 1.
-- clocks:	from common clock binding; list of parent clock handles,
-		- 5p49v5923 and
-		  5p49v5925 and
-		  5p49v6901: (required) either or both of XTAL or CLKIN
-					reference clock.
-		- 5p49v5933 and
-		- 5p49v5935: (optional) property not present (internal
-					Xtal used) or CLKIN reference
-					clock.
-- clock-names:	from common clock binding; clock input names, can be
-		- 5p49v5923 and
-		  5p49v5925 and
-		  5p49v6901: (required) either or both of "xin", "clkin".
-		- 5p49v5933 and
-		- 5p49v5935: (optional) property not present or "clkin".
-
-==Mapping between clock specifier and physical pins==
-
-When referencing the provided clock in the DT using phandle and
-clock specifier, the following mapping applies:
-
-5P49V5923:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT2
-
-5P49V5933:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT4
-
-5P49V5925 and
-5P49V5935:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT2
-	3 -- OUT3
-	4 -- OUT4
-
-5P49V6901:
-	0 -- OUT0_SEL_I2CB
-	1 -- OUT1
-	2 -- OUT2
-	3 -- OUT3
-	4 -- OUT4
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25m {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
-	/* IDT 5P49V5923 i2c clock generator */
-	vc5: clock-generator@6a {
-		compatible = "idt,5p49v5923";
-		reg = <0x6a>;
-		#clock-cells = <1>;
-
-		/* Connect XIN input to 25MHz reference */
-		clocks = <&ref25m>;
-		clock-names = "xin";
-	};
-};
-
-/* Consumer referencing the 5P49V5923 pin OUT1 */
-consumer {
-	...
-	clocks = <&vc5 1>;
-	...
-}