1 files changed, 0 insertions, 36 deletions
diff --git a/dts/Bindings/clock/imx6sll-clock.txt b/dts/Bindings/clock/imx6sll-clock.txt
deleted file mode 100644
index fee849d5fd..0000000000
--- a/dts/Bindings/clock/imx6sll-clock.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Clock bindings for Freescale i.MX6 SLL
-
-Required properties:
-- compatible: Should be "fsl,imx6sll-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
-for the full list of i.MX6 SLL clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6sll-clock.h>
-
-clks: clock-controller@20c4000 {
-		compatible = "fsl,imx6sll-ccm";
-		reg = <0x020c4000 0x4000>;
-		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-		#clock-cells = <1>;
-		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
-		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-};
-
-uart1: serial@2020000 {
-		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
-		reg = <0x02020000 0x4000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
-			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
-		clock-names = "ipg", "per";
-};