1 files changed, 0 insertions, 107 deletions
diff --git a/dts/Bindings/clock/nvidia,tegra124-car.txt b/dts/Bindings/clock/nvidia,tegra124-car.txt
deleted file mode 100644
index 7f02fb4ca4..0000000000
--- a/dts/Bindings/clock/nvidia,tegra124-car.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in the header files
-  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
-  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
-  (for Tegra124-specific clocks).
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-- nvidia,external-memory-controller : phandle of the EMC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type (see
-field RAM_CODE in register PMC_STRAPPING_OPT_A).
-
-Required properties for "emc-timings" nodes :
-- nvidia,ram-code : Should contain the value of RAM_CODE this timing set
-  is used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate.
-
-Required properties for "timing" nodes :
-- clock-frequency : Should contain the memory clock rate to which this timing
-relates.
-- nvidia,parent-clock-frequency : Should contain the rate at which the current
-parent of the EMC clock should be running at this timing.
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - emc-parent : the clock that should be the parent of the EMC clock at this
-timing.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra124-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		nvidia,external-memory-controller = <&emc>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA124_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <112400000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-
-	clock@60006000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-			timing-20400000 {
-				clock-frequency = <20400000>;
-				nvidia,parent-clock-frequency = <408000000>;
-				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
-				clock-names = "emc-parent";
-			};
-		};
-	};
-};