1 files changed, 0 insertions, 70 deletions
diff --git a/dts/Bindings/clock/rockchip,px30-cru.txt b/dts/Bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cddec..0000000000
--- a/dts/Bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-          in clock-names
-- clock-names: Should contain the following:
-  - "xin24m" for both PMUCRU and CRU
-  - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	pmucru: clock-controller@ff2bc000 {
-		compatible = "rockchip,px30-pmucru";
-		reg = <0x0 0xff2bc000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff2b0000 {
-		compatible = "rockchip,px30-cru";
-		reg = <0x0 0xff2b0000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff030000 {
-		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff030000 0x0 0x100>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};