1 files changed, 0 insertions, 126 deletions
diff --git a/dts/Bindings/clock/silabs,si5351.txt b/dts/Bindings/clock/silabs,si5351.txt
deleted file mode 100644
index f00191cad8..0000000000
--- a/dts/Bindings/clock/silabs,si5351.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
-
-Reference
-[1] Si5351A/B/C Data Sheet
-    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
-
-The Si5351a/b/c are programmable i2c clock generators with up to 8 output
-clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
-3 output clocks are accessible. The internal structure of the clock
-generators can be found in [1].
-
-==I2C device node==
-
-Required properties:
-- compatible: shall be one of the following:
-	"silabs,si5351a" - Si5351a, QFN20 package
-	"silabs,si5351a-msop" - Si5351a, MSOP10 package
-	"silabs,si5351b" - Si5351b, QFN20 package
-	"silabs,si5351c" - Si5351c, QFN20 package
-- reg: i2c device address, shall be 0x60 or 0x61.
-- #clock-cells: from common clock binding; shall be set to 1.
-- clocks: from common clock binding; list of parent clock
-  handles, shall be xtal reference clock or xtal and clkin for
-  si5351c only. Corresponding clock input names are "xtal" and
-  "clkin" respectively.
-- #address-cells: shall be set to 1.
-- #size-cells: shall be set to 0.
-
-Optional properties:
-- silabs,pll-source: pair of (number, source) for each pll. Allows
-  to overwrite clock source of pll A (number=0) or B (number=1).
-
-==Child nodes==
-
-Each of the clock outputs can be overwritten individually by
-using a child node to the I2C device node. If a child node for a clock
-output is not set, the eeprom configuration is not overwritten.
-
-Required child node properties:
-- reg: number of clock output.
-
-Optional child node properties:
-- silabs,clock-source: source clock of the output divider stage N, shall be
-  0 = multisynth N
-  1 = multisynth 0 for output clocks 0-3, else multisynth4
-  2 = xtal
-  3 = clkin (si5351c only)
-- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
-- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
-  divider.
-- silabs,pll-master: boolean, multisynth can change pll frequency.
-- silabs,pll-reset: boolean, clock output can reset its pll.
-- silabs,disable-state : clock output disable state, shall be
-  0 = clock output is driven LOW when disabled
-  1 = clock output is driven HIGH when disabled
-  2 = clock output is FLOATING (HIGH-Z) when disabled
-  3 = clock output is NEVER disabled
-
-==Example==
-
-/* 25MHz reference crystal */
-ref25: ref25M {
-	compatible = "fixed-clock";
-	#clock-cells = <0>;
-	clock-frequency = <25000000>;
-};
-
-i2c-master-node {
-
-	/* Si5351a msop10 i2c clock generator */
-	si5351a: clock-generator@60 {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-		clock-names = "xtal";
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		/*
-		 * overwrite clkout0 configuration with:
-		 * - 8mA output drive strength
-		 * - pll0 as clock source of multisynth0
-		 * - multisynth0 as clock source of output divider
-		 * - multisynth0 can change pll0
-		 * - set initial clock frequency of 74.25MHz
-		 */
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-			clock-frequency = <74250000>;
-		};
-
-		/*
-		 * overwrite clkout1 configuration with:
-		 * - 4mA output drive strength
-		 * - pll1 as clock source of multisynth1
-		 * - multisynth1 as clock source of output divider
-		 * - multisynth1 can change pll1
-		 */
-		clkout1 {
-			reg = <1>;
-			silabs,drive-strength = <4>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			pll-master;
-		};
-
-		/*
-		 * overwrite clkout2 configuration with:
-		 * - xtal as clock source of output divider
-		 */
-		clkout2 {
-			reg = <2>;
-			silabs,clock-source = <2>;
-		};
-	};
-};