diff options
Diffstat (limited to 'dts/Bindings/clock/st,stm32-rcc.txt')
| -rw-r--r-- | dts/Bindings/clock/st,stm32-rcc.txt | 42 |
1 files changed, 35 insertions, 7 deletions
diff --git a/dts/Bindings/clock/st,stm32-rcc.txt b/dts/Bindings/clock/st,stm32-rcc.txt index fee3205cdf..c209de6cfa 100644 --- a/dts/Bindings/clock/st,stm32-rcc.txt +++ b/dts/Bindings/clock/st,stm32-rcc.txt @@ -1,16 +1,16 @@ STMicroelectronics STM32 Reset and Clock Controller =================================================== -The RCC IP is both a reset and a clock controller. This documentation only -describes the clock part. +The RCC IP is both a reset and a clock controller. -Please also refer to clock-bindings.txt in this directory for common clock -controller binding usage. +Please refer to clock-bindings.txt for common clock controller binding usage. +Please also refer to reset.txt for common reset controller binding usage. Required properties: - compatible: Should be "st,stm32f42xx-rcc" - reg: should be register base and length as documented in the datasheet +- #reset-cells: 1, see below - #clock-cells: 2, device nodes should specify the clock in their "clocks" property, containing a phandle to the clock device node, an index selecting between gated clocks and other clocks and an index specifying the clock to @@ -19,6 +19,7 @@ Required properties: Example: rcc: rcc@40023800 { + #reset-cells = <1>; #clock-cells = <2> compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; @@ -35,16 +36,23 @@ from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). It is calculated as: index = register_offset / 4 * 32 + bit_offset. Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). +To simplify the usage and to share bit definition with the reset and clock +drivers of the RCC IP, macros are available to generate the index in +human-readble format. + +For STM32F4 series, the macro are available here: + - include/dt-bindings/mfd/stm32f4-rcc.h + Example: /* Gated clock, AHB1 bit 0 (GPIOA) */ ... { - clocks = <&rcc 0 0> + clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)> }; /* Gated clock, AHB2 bit 4 (CRYP) */ ... { - clocks = <&rcc 0 36> + clocks = <&rcc 0 STM32F4_AHB2_CLOCK(CRYP)> }; Specifying other clocks @@ -61,5 +69,25 @@ Example: /* Misc clock, FCLK */ ... { - clocks = <&rcc 1 1> + clocks = <&rcc 1 STM32F4_APB1_CLOCK(TIM2)> + }; + + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. +For example, for CRC reset: + crc = AHB1RSTR_offset / 4 * 32 + CRCRST_bit_offset = 0x10 / 4 * 32 + 12 = 140 + +example: + + timer2 { + resets = <&rcc STM32F4_APB1_RESET(TIM2)>; }; |