summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/clock/ti/davinci/pll.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/clock/ti/davinci/pll.txt')
-rw-r--r--dts/Bindings/clock/ti/davinci/pll.txt96
1 files changed, 96 insertions, 0 deletions
diff --git a/dts/Bindings/clock/ti/davinci/pll.txt b/dts/Bindings/clock/ti/davinci/pll.txt
new file mode 100644
index 0000000..36998e1
--- /dev/null
+++ b/dts/Bindings/clock/ti/davinci/pll.txt
@@ -0,0 +1,96 @@
+Binding for TI DaVinci PLL Controllers
+
+The PLL provides clocks to most of the components on the SoC. In addition
+to the PLL itself, this controller also contains bypasses, gates, dividers,
+an multiplexers for various clock signals.
+
+Required properties:
+- compatible: shall be one of:
+ - "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
+ - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
+- reg: physical base address and size of the controller's register area.
+- clocks: phandles corresponding to the clock names
+- clock-names: names of the clock sources - depends on compatible string
+ - for "ti,da850-pll0", shall be "clksrc", "extclksrc"
+ - for "ti,da850-pll1", shall be "clksrc"
+
+Optional properties:
+- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+ wave input on the OSCIN pin instead of using a crystal oscillator.
+ This property is only valid when compatible = "ti,da850-pll0".
+
+
+Optional child nodes:
+
+pllout
+ Describes the main PLL clock output (before POSTDIV). The node name must
+ be "pllout".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+sysclk
+ Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
+ domains. The node name must be "sysclk". Consumers of this node should
+ use "n" in "SYSCLKn" as the index parameter for the clock cell.
+
+ Required properties:
+ - #clock-cells: shall be 1
+
+auxclk
+ Describes the AUXCLK output of the PLL. The node name must be "auxclk".
+ This child node is only valid when compatible = "ti,da850-pll0".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+obsclk
+ Describes the OBSCLK output of the PLL. The node name must be "obsclk".
+
+ Required properties:
+ - #clock-cells: shall be 0
+
+
+Examples:
+
+ pll0: clock-controller@11000 {
+ compatible = "ti,da850-pll0";
+ reg = <0x11000 0x1000>;
+ clocks = <&ref_clk>, <&pll1_sysclk 3>;
+ clock-names = "clksrc", "extclksrc";
+ ti,clkmode-square-wave;
+
+ pll0_pllout: pllout {
+ #clock-cells = <0>;
+ };
+
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+
+ pll0_auxclk: auxclk {
+ #clock-cells = <0>;
+ };
+
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+
+ pll1: clock-controller@21a000 {
+ compatible = "ti,da850-pll1";
+ reg = <0x21a000 0x1000>;
+ clocks = <&ref_clk>;
+ clock-names = "clksrc";
+
+ pll0_sysclk: sysclk {
+ #clock-cells = <1>;
+ };
+
+ pll0_obsclk: obsclk {
+ #clock-cells = <0>;
+ };
+ };
+
+Also see:
+- Documentation/devicetree/bindings/clock/clock-bindings.txt