summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/clock
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/clock')
-rw-r--r--dts/Bindings/clock/actions,owl-cmu.txt (renamed from dts/Bindings/clock/actions,s900-cmu.txt)20
-rw-r--r--dts/Bindings/clock/amlogic,axg-audio-clkc.txt56
-rw-r--r--dts/Bindings/clock/at91-clock.txt51
-rw-r--r--dts/Bindings/clock/exynos5440-clock.txt28
-rw-r--r--dts/Bindings/clock/maxim,max9485.txt59
-rw-r--r--dts/Bindings/clock/qcom,dispcc.txt19
-rw-r--r--dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt43
-rw-r--r--dts/Bindings/clock/rockchip,px30-cru.txt65
-rw-r--r--dts/Bindings/clock/sun8i-de2.txt1
9 files changed, 293 insertions, 49 deletions
diff --git a/dts/Bindings/clock/actions,s900-cmu.txt b/dts/Bindings/clock/actions,owl-cmu.txt
index 93e4fb8..d1e60d2 100644
--- a/dts/Bindings/clock/actions,s900-cmu.txt
+++ b/dts/Bindings/clock/actions,owl-cmu.txt
@@ -1,12 +1,14 @@
-* Actions S900 Clock Management Unit (CMU)
+* Actions Semi Owl Clock Management Unit (CMU)
-The Actions S900 clock management unit generates and supplies clock to various
-controllers within the SoC. The clock binding described here is applicable to
-S900 SoC.
+The Actions Semi Owl Clock Management Unit generates and supplies clock
+to various controllers within the SoC. The clock binding described here is
+applicable to S900 and S700 SoC's.
Required Properties:
-- compatible: should be "actions,s900-cmu"
+- compatible: should be one of the following,
+ "actions,s900-cmu"
+ "actions,s700-cmu"
- reg: physical base address of the controller and length of memory mapped
region.
- clocks: Reference to the parent clocks ("hosc", "losc")
@@ -15,16 +17,16 @@ Required Properties:
Each clock is assigned an identifier, and client nodes can use this identifier
to specify the clock which they consume.
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/actions,s900-cmu.h header and can be used in device
-tree sources.
+All available clocks are defined as preprocessor macros in corresponding
+dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be
+used in device tree sources.
External clocks:
The hosc clock used as input for the plls is generated outside the SoC. It is
expected that it is defined using standard clock bindings as "hosc".
-Actions S900 CMU also requires one more clock:
+Actions Semi S900 CMU also requires one more clock:
- "losc" - internal low frequency oscillator
Example: Clock Management Unit node:
diff --git a/dts/Bindings/clock/amlogic,axg-audio-clkc.txt b/dts/Bindings/clock/amlogic,axg-audio-clkc.txt
new file mode 100644
index 0000000..61777ad
--- /dev/null
+++ b/dts/Bindings/clock/amlogic,axg-audio-clkc.txt
@@ -0,0 +1,56 @@
+* Amlogic AXG Audio Clock Controllers
+
+The Amlogic AXG audio clock controller generates and supplies clock to the
+other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+devices.
+
+Required Properties:
+
+- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D
+- reg : physical base address of the clock controller and length of
+ memory mapped region.
+- clocks : a list of phandle + clock-specifier pairs for the clocks listed
+ in clock-names.
+- clock-names : must contain the following:
+ * "pclk" - Main peripheral bus clock
+ may contain the following:
+ * "mst_in[0-7]" - 8 input plls to generate clock signals
+ * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
+ components.
+ * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
+ components.
+- resets : phandle of the internal reset line
+- #clock-cells : should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
+used in device tree sources.
+
+Example:
+
+clkc_audio: clock-controller@0 {
+ compatible = "amlogic,axg-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7";
+ resets = <&reset RESET_AUDIO>;
+};
diff --git a/dts/Bindings/clock/at91-clock.txt b/dts/Bindings/clock/at91-clock.txt
index 51c259a..8f8f950 100644
--- a/dts/Bindings/clock/at91-clock.txt
+++ b/dts/Bindings/clock/at91-clock.txt
@@ -17,14 +17,13 @@ Required properties:
"atmel,at91sam9x5-clk-slow-rc-osc":
at91 internal slow RC oscillator
- "atmel,at91rm9200-pmc" or
- "atmel,at91sam9g45-pmc" or
- "atmel,at91sam9n12-pmc" or
- "atmel,at91sam9x5-pmc" or
- "atmel,sama5d3-pmc":
+ "atmel,<chip>-pmc":
at91 PMC (Power Management Controller)
All at91 specific clocks (clocks defined below) must be child
node of the PMC node.
+ <chip> can be: at91rm9200, at91sam9260, at91sam9261,
+ at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
+ sama5d2, sama5d3 or sama5d4.
"atmel,at91sam9x5-clk-slow" (under sckc node)
or
@@ -91,6 +90,9 @@ Required properties:
at91 audio pll output on AUDIOPLLCLK that feeds the PMC
and can be used by peripheral clock or generic clock
+ "atmel,sama5d2-clk-i2s-mux" (under pmc node):
+ at91 I2S clock source selection
+
Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
@@ -180,7 +182,6 @@ For example:
};
Required properties for main clock internal RC oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- clock-frequency : define the internal RC oscillator frequency.
@@ -197,7 +198,6 @@ For example:
};
Required properties for main clock oscillator:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main osc source clk sources (see atmel datasheet).
@@ -218,7 +218,6 @@ For example:
};
Required properties for main clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<0>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall encode the main clk sources (see atmel datasheet).
@@ -233,7 +232,6 @@ For example:
};
Required properties for master clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<3>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the master clock sources (see atmel datasheet) phandles.
@@ -292,7 +290,6 @@ For example:
Required properties for pll clocks:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<1>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock phandle.
@@ -348,7 +345,6 @@ For example:
};
Required properties for programmable clocks:
-- interrupt-parent : must reference the PMC node.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
- clocks : shall be the programmable clock source phandles.
@@ -451,7 +447,6 @@ For example:
Required properties for utmi clock:
-- interrupt-parent : must reference the PMC node.
- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : shall be the main clock source phandle.
@@ -507,3 +502,35 @@ For example:
atmel,clk-output-range = <0 83000000>;
};
};
+
+Required properties for I2S mux clocks:
+- #size-cells : shall be 0 (reg is used to encode I2S bus id).
+- #address-cells : shall be 1 (reg is used to encode I2S bus id).
+- name: device tree node describing a specific mux clock.
+ * #clock-cells : from common clock binding; shall be set to 0.
+ * clocks : shall be the mux clock parent phandles; shall be 2 phandles:
+ peripheral and generated clock; the first phandle shall belong to the
+ peripheral clock and the second one shall belong to the generated
+ clock; "clock-indices" property can be user to specify
+ the correct order.
+ * reg: I2S bus id of the corresponding mux clock.
+ e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
+
+For example:
+ i2s_clkmux {
+ compatible = "atmel,sama5d2-clk-i2s-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2s0muxck: i2s0_muxclk {
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ #clock-cells = <0>;
+ reg = <0>;
+ };
+
+ i2s1muxck: i2s1_muxclk {
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ #clock-cells = <0>;
+ reg = <1>;
+ };
+ };
diff --git a/dts/Bindings/clock/exynos5440-clock.txt b/dts/Bindings/clock/exynos5440-clock.txt
deleted file mode 100644
index c7d227c..0000000
--- a/dts/Bindings/clock/exynos5440-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Samsung Exynos5440 Clock Controller
-
-The Exynos5440 clock controller generates and supplies clock to various
-controllers within the Exynos5440 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5440-clock".
-
-- reg: physical base address of the controller and length of memory mapped
- region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5440.h header and can be used in device
-tree sources.
-
-Example: An example of a clock controller node is listed below.
-
- clock: clock-controller@10010000 {
- compatible = "samsung,exynos5440-clock";
- reg = <0x160000 0x10000>;
- #clock-cells = <1>;
- };
diff --git a/dts/Bindings/clock/maxim,max9485.txt b/dts/Bindings/clock/maxim,max9485.txt
new file mode 100644
index 0000000..61bec11
--- /dev/null
+++ b/dts/Bindings/clock/maxim,max9485.txt
@@ -0,0 +1,59 @@
+Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
+
+This device exposes 4 clocks in total:
+
+- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz
+- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete
+ frequencies
+- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT
+
+MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
+requests.
+
+Required properties:
+- compatible: "maxim,max9485"
+- clocks: Input clock, must provice 27.000 MHz
+- clock-names: Must be set to "xclk"
+- #clock-cells: From common clock binding; shall be set to 1
+
+Optional properties:
+- reset-gpios: GPIO descriptor connected to the #RESET input pin
+- vdd-supply: A regulator node for Vdd
+- clock-output-names: Name of output clocks, as defined in common clock
+ bindings
+
+If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
+and "clkout2".
+
+Clocks are defined as preprocessor macros in the dt-binding header.
+
+Example:
+
+ #include <dt-bindings/clock/maxim,max9485.h>
+
+ xo-27mhz: xo-27mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+
+ &i2c0 {
+ max9485: audio-clock@63 {
+ reg = <0x63>;
+ compatible = "maxim,max9485";
+ clock-names = "xclk";
+ clocks = <&xo-27mhz>;
+ reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&3v3-reg>;
+ #clock-cells = <1>;
+ };
+ };
+
+ // Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clock-names = "foo-input-clk";
+ clocks = <&max9485 MAX9485_CLKOUT1>;
+ };
diff --git a/dts/Bindings/clock/qcom,dispcc.txt b/dts/Bindings/clock/qcom,dispcc.txt
new file mode 100644
index 0000000..d639e18
--- /dev/null
+++ b/dts/Bindings/clock/qcom,dispcc.txt
@@ -0,0 +1,19 @@
+Qualcomm Technologies, Inc. Display Clock Controller Binding
+------------------------------------------------------------
+
+Required properties :
+
+- compatible : shall contain "qcom,sdm845-dispcc"
+- reg : shall contain base register location and length.
+- #clock-cells : from common clock binding, shall contain 1.
+- #reset-cells : from common reset binding, shall contain 1.
+- #power-domain-cells : from generic power domain binding, shall contain 1.
+
+Example:
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sdm845-dispcc";
+ reg = <0xaf00000 0x100000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
diff --git a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt
new file mode 100644
index 0000000..d60b997
--- /dev/null
+++ b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.txt
@@ -0,0 +1,43 @@
+* Renesas R9A06G032 SYSCTRL
+
+Required Properties:
+
+ - compatible: Must be:
+ - "renesas,r9a06g032-sysctrl"
+ - reg: Base address and length of the SYSCTRL IO block.
+ - #clock-cells: Must be 1
+ - clocks: References to the parent clocks:
+ - external 40mhz crystal.
+ - external (optional) 32.768khz
+ - external (optional) jtag input
+ - external (optional) RGMII_REFCLK
+ - clock-names: Must be:
+ clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+
+Examples
+--------
+
+ - SYSCTRL node:
+
+ sysctrl: system-controller@4000c000 {
+ compatible = "renesas,r9a06g032-sysctrl";
+ reg = <0x4000c000 0x1000>;
+ #clock-cells = <1>;
+
+ clocks = <&ext_mclk>, <&ext_rtc_clk>,
+ <&ext_jtag_clk>, <&ext_rgmii_ref>;
+ clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+ };
+
+ - Other nodes can use the clocks provided by SYSCTRL as in:
+
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+ uart0: serial@40060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40060000 0x400>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART0>;
+ clock-names = "baudclk";
+ };
diff --git a/dts/Bindings/clock/rockchip,px30-cru.txt b/dts/Bindings/clock/rockchip,px30-cru.txt
new file mode 100644
index 0000000..39f0c1a
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,px30-cru.txt
@@ -0,0 +1,65 @@
+* Rockchip PX30 Clock and Reset Unit
+
+The PX30 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
+- compatible: CRU should be "rockchip,px30-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "i2sx_clkin" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+ pmucru: clock-controller@ff2bc000 {
+ compatible = "rockchip,px30-pmucru";
+ reg = <0x0 0xff2bc000 0x0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ cru: clock-controller@ff2b0000 {
+ compatible = "rockchip,px30-cru";
+ reg = <0x0 0xff2b0000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@ff030000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff030000 0x0 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
diff --git a/dts/Bindings/clock/sun8i-de2.txt b/dts/Bindings/clock/sun8i-de2.txt
index f2fa87c..e94582e 100644
--- a/dts/Bindings/clock/sun8i-de2.txt
+++ b/dts/Bindings/clock/sun8i-de2.txt
@@ -6,6 +6,7 @@ Required properties :
- "allwinner,sun8i-a83t-de2-clk"
- "allwinner,sun8i-h3-de2-clk"
- "allwinner,sun8i-v3s-de2-clk"
+ - "allwinner,sun50i-a64-de2-clk"
- "allwinner,sun50i-h5-de2-clk"
- reg: Must contain the registers base address and length