summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/clock
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/clock')
-rw-r--r--dts/Bindings/clock/amlogic,axg-audio-clkc.txt3
-rw-r--r--dts/Bindings/clock/at91-clock.txt33
-rw-r--r--dts/Bindings/clock/cirrus,lochnagar.txt93
-rw-r--r--dts/Bindings/clock/milbeaut-clock.yaml73
-rw-r--r--dts/Bindings/clock/qcom,turingcc.txt19
-rw-r--r--dts/Bindings/clock/qoriq-clock.txt5
-rw-r--r--dts/Bindings/clock/sifive/fu540-prci.txt46
-rw-r--r--dts/Bindings/clock/st,stm32-rcc.txt6
-rw-r--r--dts/Bindings/clock/xlnx,zynqmp-clk.txt63
9 files changed, 319 insertions, 22 deletions
diff --git a/dts/Bindings/clock/amlogic,axg-audio-clkc.txt b/dts/Bindings/clock/amlogic,axg-audio-clkc.txt
index 61777ad..0f77774 100644
--- a/dts/Bindings/clock/amlogic,axg-audio-clkc.txt
+++ b/dts/Bindings/clock/amlogic,axg-audio-clkc.txt
@@ -6,7 +6,8 @@ devices.
Required Properties:
-- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D
+- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D,
+ "amlogic,g12a-audio-clkc" for G12A.
- reg : physical base address of the clock controller and length of
memory mapped region.
- clocks : a list of phandle + clock-specifier pairs for the clocks listed
diff --git a/dts/Bindings/clock/at91-clock.txt b/dts/Bindings/clock/at91-clock.txt
index e9f70fc..b520280 100644
--- a/dts/Bindings/clock/at91-clock.txt
+++ b/dts/Bindings/clock/at91-clock.txt
@@ -8,35 +8,30 @@ Slow Clock controller:
Required properties:
- compatible : shall be one of the following:
- "atmel,at91sam9x5-sckc" or
+ "atmel,at91sam9x5-sckc",
+ "atmel,sama5d3-sckc" or
"atmel,sama5d4-sckc":
at91 SCKC (Slow Clock Controller)
- This node contains the slow clock definitions.
-
- "atmel,at91sam9x5-clk-slow-osc":
- at91 slow oscillator
-
- "atmel,at91sam9x5-clk-slow-rc-osc":
- at91 internal slow RC oscillator
-- reg : defines the IO memory reserved for the SCKC.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
+- #clock-cells : shall be 0.
+- clocks : shall be the input parent clock phandle for the clock.
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+ provided on XIN.
For example:
- sckc: sckc@fffffe50 {
- compatible = "atmel,sama5d3-pmc";
- reg = <0xfffffe50 0x4>
- #size-cells = <0>;
- #address-cells = <1>;
-
- /* put at91 slow clocks here */
+ sckc@fffffe50 {
+ compatible = "atmel,at91sam9x5-sckc";
+ reg = <0xfffffe50 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
};
Power Management Controller (PMC):
Required properties:
-- compatible : shall be "atmel,<chip>-pmc", "syscon":
+- compatible : shall be "atmel,<chip>-pmc", "syscon" or
+ "microchip,sam9x60-pmc"
<chip> can be: at91rm9200, at91sam9260, at91sam9261,
at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
diff --git a/dts/Bindings/clock/cirrus,lochnagar.txt b/dts/Bindings/clock/cirrus,lochnagar.txt
new file mode 100644
index 0000000..b8d8ef3
--- /dev/null
+++ b/dts/Bindings/clock/cirrus,lochnagar.txt
@@ -0,0 +1,93 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform. Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the clock portion of
+the driver.
+
+Also see these documents for generic binding information:
+ [1] Clock : ../clock/clock-bindings.txt
+
+And these for relevant defines:
+ [2] include/dt-bindings/clock/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+ [3] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+ - compatible : One of the following strings:
+ "cirrus,lochnagar1-clk"
+ "cirrus,lochnagar2-clk"
+
+ - #clock-cells : Must be 1. The first cell indicates the clock
+ number, see [2] for available clocks and [1].
+
+Optional properties:
+
+ - clocks : Must contain an entry for each clock in clock-names.
+ - clock-names : May contain entries for each of the following
+ clocks:
+ - ln-cdc-clkout : Output clock from CODEC card.
+ - ln-dsp-clkout : Output clock from DSP card.
+ - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional
+ input audio clocks from host system.
+ - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from
+ external connector.
+ - ln-spdif-clkout : Optional input audio clock from SPDIF.
+ - ln-adat-mclk : Optional input audio clock from ADAT.
+ - ln-pmic-32k : On board fixed clock.
+ - ln-clk-12m : On board fixed clock.
+ - ln-clk-11m : On board fixed clock.
+ - ln-clk-24m : On board fixed clock.
+ - ln-clk-22m : On board fixed clock.
+ - ln-clk-8m : On board fixed clock.
+ - ln-usb-clk-24m : On board fixed clock.
+ - ln-usb-clk-12m : On board fixed clock.
+
+ - assigned-clocks : A list of Lochnagar clocks to be reparented, see
+ [2] for available clocks.
+ - assigned-clock-parents : Parents to be assigned to the clocks
+ listed in "assigned-clocks".
+
+Optional nodes:
+
+ - fixed-clock nodes may be registered for the following on board clocks:
+ - ln-pmic-32k : 32768 Hz
+ - ln-clk-12m : 12288000 Hz
+ - ln-clk-11m : 11298600 Hz
+ - ln-clk-24m : 24576000 Hz
+ - ln-clk-22m : 22579200 Hz
+ - ln-clk-8m : 8192000 Hz
+ - ln-usb-clk-24m : 24576000 Hz
+ - ln-usb-clk-12m : 12288000 Hz
+
+Example:
+
+lochnagar {
+ lochnagar-clk {
+ compatible = "cirrus,lochnagar2-clk";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk-audio>, <&clk_pmic>;
+ clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+ assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>,
+ <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>;
+ assigned-clock-parents = <&clk-audio>,
+ <&clk-pmic>;
+ };
+
+ clk-pmic: clk-pmic {
+ compatible = "fixed-clock";
+ clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+};
diff --git a/dts/Bindings/clock/milbeaut-clock.yaml b/dts/Bindings/clock/milbeaut-clock.yaml
new file mode 100644
index 0000000..5cf0b81
--- /dev/null
+++ b/dts/Bindings/clock/milbeaut-clock.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/milbeaut-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Clock Controller Binding
+
+maintainers:
+ - Taichi Sugaya <sugaya.taichi@socionext.com>
+
+description: |
+ Milbeaut SoCs Clock controller is an integrated clock controller, which
+ generates and supplies to all modules.
+
+ This binding uses common clock bindings
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - socionext,milbeaut-m10v-ccu
+ clocks:
+ maxItems: 1
+ description: external clock
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - '#clock-cells'
+
+examples:
+ # Clock controller node:
+ - |
+ m10v-clk-ctrl@1d021000 {
+ compatible = "socionext,milbeaut-m10v-clk-ccu";
+ reg = <0x1d021000 0x4000>;
+ #clock-cells = <1>;
+ clocks = <&clki40mhz>;
+ };
+
+ # Required an external clock for Clock controller node:
+ - |
+ clocks {
+ clki40mhz: clki40mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+ /* other clocks */
+ };
+
+ # The clock consumer shall specify the desired clock-output of the clock
+ # controller as below by specifying output-id in its "clk" phandle cell.
+ # 2: uart
+ # 4: 32-bit timer
+ # 7: UHS-I/II
+ - |
+ serial@1e700010 {
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ };
+
+...
diff --git a/dts/Bindings/clock/qcom,turingcc.txt b/dts/Bindings/clock/qcom,turingcc.txt
new file mode 100644
index 0000000..126517d
--- /dev/null
+++ b/dts/Bindings/clock/qcom,turingcc.txt
@@ -0,0 +1,19 @@
+Qualcomm Turing Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible: shall contain "qcom,qcs404-turingcc".
+- reg: shall contain base register location and length.
+- clocks: ahb clock for the TuringCC
+- #clock-cells: from common clock binding, shall contain 1.
+- #reset-cells: from common reset binding, shall contain 1.
+
+Example:
+ turingcc: clock-controller@800000 {
+ compatible = "qcom,qcs404-turingcc";
+ reg = <0x00800000 0x30000>;
+ clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/dts/Bindings/clock/qoriq-clock.txt b/dts/Bindings/clock/qoriq-clock.txt
index c655f28..f7d48f2 100644
--- a/dts/Bindings/clock/qoriq-clock.txt
+++ b/dts/Bindings/clock/qoriq-clock.txt
@@ -39,6 +39,7 @@ Required properties:
* "fsl,b4860-clockgen"
* "fsl,ls1012a-clockgen"
* "fsl,ls1021a-clockgen"
+ * "fsl,ls1028a-clockgen"
* "fsl,ls1043a-clockgen"
* "fsl,ls1046a-clockgen"
* "fsl,ls1088a-clockgen"
@@ -83,8 +84,8 @@ second cell is the clock index for the specified type.
1 cmux index (n in CLKCnCSR)
2 hwaccel index (n in CLKCGnHWACSR)
3 fman 0 for fm1, 1 for fm2
- 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4
- 4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8
+ 4 platform pll n=pll/(n+1). For example, when n=1,
+ that means output_freq=PLL_freq/2.
5 coreclk must be 0
3. Example
diff --git a/dts/Bindings/clock/sifive/fu540-prci.txt b/dts/Bindings/clock/sifive/fu540-prci.txt
new file mode 100644
index 0000000..349808f
--- /dev/null
+++ b/dts/Bindings/clock/sifive/fu540-prci.txt
@@ -0,0 +1,46 @@
+SiFive FU540 PRCI bindings
+
+On the FU540 family of SoCs, most system-wide clock and reset integration
+is via the PRCI IP block.
+
+Required properties:
+- compatible: Should be "sifive,<chip>-prci". Only one value is
+ supported: "sifive,fu540-c000-prci"
+- reg: Should describe the PRCI's register target physical address region
+- clocks: Should point to the hfclk device tree node and the rtcclk
+ device tree node. The RTC clock here is not a time-of-day clock,
+ but is instead a high-stability clock source for system timers
+ and cycle counters.
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock via the clock ID
+macros defined in include/dt-bindings/clock/sifive-fu540-prci.h.
+These macros begin with PRCI_CLK_.
+
+The hfclk and rtcclk nodes are required, and represent physical
+crystals or resonators located on the PCB. These nodes should be present
+underneath /, rather than /soc.
+
+Examples:
+
+/* under /, in PCB-specific DT data */
+hfclk: hfclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <33333333>;
+ clock-output-names = "hfclk";
+};
+rtcclk: rtcclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <1000000>;
+ clock-output-names = "rtcclk";
+};
+
+/* under /soc, in SoC-specific DT data */
+prci: clock-controller@10000000 {
+ compatible = "sifive,fu540-c000-prci";
+ reg = <0x0 0x10000000 0x0 0x1000>;
+ clocks = <&hfclk>, <&rtcclk>;
+ #clock-cells = <1>;
+};
diff --git a/dts/Bindings/clock/st,stm32-rcc.txt b/dts/Bindings/clock/st,stm32-rcc.txt
index b240121..cfa04b6 100644
--- a/dts/Bindings/clock/st,stm32-rcc.txt
+++ b/dts/Bindings/clock/st,stm32-rcc.txt
@@ -11,6 +11,8 @@ Required properties:
"st,stm32f42xx-rcc"
"st,stm32f469-rcc"
"st,stm32f746-rcc"
+ "st,stm32f769-rcc"
+
- reg: should be register base and length as documented in the
datasheet
- #reset-cells: 1, see below
@@ -102,6 +104,10 @@ The secondary index is bound with the following magic numbers:
28 CLK_I2C3
29 CLK_I2C4
30 CLK_LPTIMER (LPTimer1 clock)
+ 31 CLK_PLL_SRC
+ 32 CLK_DFSDM1
+ 33 CLK_ADFSDM1
+ 34 CLK_F769_DSI
)
Example:
diff --git a/dts/Bindings/clock/xlnx,zynqmp-clk.txt b/dts/Bindings/clock/xlnx,zynqmp-clk.txt
new file mode 100644
index 0000000..391ee1a
--- /dev/null
+++ b/dts/Bindings/clock/xlnx,zynqmp-clk.txt
@@ -0,0 +1,63 @@
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells: Must be 1
+ - compatible: Must contain: "xlnx,zynqmp-clk"
+ - clocks: List of clock specifiers which are external input
+ clocks to the given clock controller. Please refer
+ the next section to find the input clocks for a
+ given controller.
+ - clock-names: List of clock names which are exteral input clocks
+ to the given clock controller. Please refer to the
+ clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX # with XX = 00..77
+ - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx-zynqmp-clk.h.
+
+-------
+Example
+-------
+
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_clk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "xlnx,zynqmp-clk";
+ clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
+ clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+ };
+ };
+};