diff options
Diffstat (limited to 'dts/Bindings/clock')
47 files changed, 1641 insertions, 824 deletions
diff --git a/dts/Bindings/clock/airoha,en7523-scu.yaml b/dts/Bindings/clock/airoha,en7523-scu.yaml new file mode 100644 index 0000000000..d60e746548 --- /dev/null +++ b/dts/Bindings/clock/airoha,en7523-scu.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EN7523 Clock Device Tree Bindings + +maintainers: + - Felix Fietkau <nbd@nbd.name> + - John Crispin <nbd@nbd.name> + +description: | + This node defines the System Control Unit of the EN7523 SoC, + a collection of registers configuring many different aspects of the SoC. + + The clock driver uses it to read and configure settings of the + PLL controller, which provides clocks for the CPU, the bus and + other SoC internal peripherals. + + Each clock is assigned an identifier and client nodes use this identifier + to specify which clock they consume. + + All these identifiers can be found in: + [1]: <include/dt-bindings/clock/en7523-clk.h>. + + The clocks are provided inside a system controller node. + +properties: + compatible: + items: + - const: airoha,en7523-scu + + reg: + maxItems: 2 + + "#clock-cells": + description: + The first cell indicates the clock number, see [1] for available + clocks. + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/en7523-clk.h> + scu: system-controller@1fa20000 { + compatible = "airoha,en7523-scu"; + reg = <0x1fa20000 0x400>, + <0x1fb00000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/clock-bindings.txt b/dts/Bindings/clock/clock-bindings.txt index f2ea53832a..6fe5413688 100644 --- a/dts/Bindings/clock/clock-bindings.txt +++ b/dts/Bindings/clock/clock-bindings.txt @@ -1,186 +1,2 @@ -This binding is a work-in-progress, and are based on some experimental -work by benh[1]. - -Sources of clock signal can be represented by any node in the device -tree. Those nodes are designated as clock providers. Clock consumer -nodes use a phandle and clock specifier pair to connect clock provider -outputs to clock inputs. Similar to the gpio specifiers, a clock -specifier is an array of zero, one or more cells identifying the clock -output on a device. The length of a clock specifier is defined by the -value of a #clock-cells property in the clock provider node. - -[1] https://patchwork.ozlabs.org/patch/31551/ - -==Clock providers== - -Required properties: -#clock-cells: Number of cells in a clock specifier; Typically 0 for nodes - with a single clock output and 1 for nodes with multiple - clock outputs. - -Optional properties: -clock-output-names: Recommended to be a list of strings of clock output signal - names indexed by the first cell in the clock specifier. - However, the meaning of clock-output-names is domain - specific to the clock provider, and is only provided to - encourage using the same meaning for the majority of clock - providers. This format may not work for clock providers - using a complex clock specifier format. In those cases it - is recommended to omit this property and create a binding - specific names property. - - Clock consumer nodes must never directly reference - the provider's clock-output-names property. - -For example: - - oscillator { - #clock-cells = <1>; - clock-output-names = "ckil", "ckih"; - }; - -- this node defines a device with two clock outputs, the first named - "ckil" and the second named "ckih". Consumer nodes always reference - clocks by index. The names should reflect the clock output signal - names for the device. - -clock-indices: If the identifying number for the clocks in the node - is not linear from zero, then this allows the mapping of - identifiers into the clock-output-names array. - -For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: - - oscillator { - compatible = "myclocktype"; - #clock-cells = <1>; - clock-indices = <1>, <3>; - clock-output-names = "clka", "clkb"; - } - - This ensures we do not have any empty strings in clock-output-names - - -==Clock consumers== - -Required properties: -clocks: List of phandle and clock specifier pairs, one pair - for each clock input to the device. Note: if the - clock provider specifies '0' for #clock-cells, then - only the phandle portion of the pair will appear. - -Optional properties: -clock-names: List of clock input name strings sorted in the same - order as the clocks property. Consumers drivers - will use clock-names to match clock input names - with clocks specifiers. -clock-ranges: Empty property indicating that child nodes can inherit named - clocks from this node. Useful for bus nodes to provide a - clock to their children. - -For example: - - device { - clocks = <&osc 1>, <&ref 0>; - clock-names = "baud", "register"; - }; - - -This represents a device with two clock inputs, named "baud" and "register". -The baud clock is connected to output 1 of the &osc device, and the register -clock is connected to output 0 of the &ref. - -==Example== - - /* external oscillator */ - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32678>; - clock-output-names = "osc"; - }; - - /* phase-locked-loop device, generates a higher frequency clock - * from the external oscillator reference */ - pll: pll@4c000 { - compatible = "vendor,some-pll-interface" - #clock-cells = <1>; - clocks = <&osc 0>; - clock-names = "ref"; - reg = <0x4c000 0x1000>; - clock-output-names = "pll", "pll-switched"; - }; - - /* UART, using the low frequency oscillator for the baud clock, - * and the high frequency switched PLL output for register - * clocking */ - uart@a000 { - compatible = "fsl,imx-uart"; - reg = <0xa000 0x1000>; - interrupts = <33>; - clocks = <&osc 0>, <&pll 1>; - clock-names = "baud", "register"; - }; - -This DT fragment defines three devices: an external oscillator to provide a -low-frequency reference clock, a PLL device to generate a higher frequency -clock signal, and a UART. - -* The oscillator is fixed-frequency, and provides one clock output, named "osc". -* The PLL is both a clock provider and a clock consumer. It uses the clock - signal generated by the external oscillator, and provides two output signals - ("pll" and "pll-switched"). -* The UART has its baud clock connected the external oscillator and its - register clock connected to the PLL clock (the "pll-switched" signal) - -==Assigned clock parents and rates== - -Some platforms may require initial configuration of default parent clocks -and clock frequencies. Such a configuration can be specified in a device tree -node through assigned-clocks, assigned-clock-parents and assigned-clock-rates -properties. The assigned-clock-parents property should contain a list of parent -clocks in the form of a phandle and clock specifier pair and the -assigned-clock-rates property should contain a list of frequencies in Hz. Both -these properties should correspond to the clocks listed in the assigned-clocks -property. - -To skip setting parent or rate of a clock its corresponding entry should be -set to 0, or can be omitted if it is not followed by any non-zero entry. - - uart@a000 { - compatible = "fsl,imx-uart"; - reg = <0xa000 0x1000>; - ... - clocks = <&osc 0>, <&pll 1>; - clock-names = "baud", "register"; - - assigned-clocks = <&clkcon 0>, <&pll 2>; - assigned-clock-parents = <&pll 2>; - assigned-clock-rates = <0>, <460800>; - }; - -In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and -the <&pll 2> clock is assigned a frequency value of 460800 Hz. - -Configuring a clock's parent and rate through the device node that consumes -the clock can be done only for clocks that have a single user. Specifying -conflicting parent or rate configuration in multiple consumer nodes for -a shared clock is forbidden. - -Configuration of common clocks, which affect multiple consumer devices can -be similarly specified in the clock provider node. - -==Protected clocks== - -Some platforms or firmwares may not fully expose all the clocks to the OS, such -as in situations where those clks are used by drivers running in ARM secure -execution levels. Such a configuration can be specified in device tree with the -protected-clocks property in the form of a clock specifier list. This property should -only be specified in the node that is providing the clocks being protected: - - clock-controller@a000f000 { - compatible = "vendor,clk95; - reg = <0xa000f000 0x1000> - #clocks-cells = <1>; - ... - protected-clocks = <UART3_CLK>, <SPI5_CLK>; - }; +This file has moved to the clock binding schema: +https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml diff --git a/dts/Bindings/clock/idt,versaclock5.yaml b/dts/Bindings/clock/idt,versaclock5.yaml index be66f1e8b5..7c331bfbe3 100644 --- a/dts/Bindings/clock/idt,versaclock5.yaml +++ b/dts/Bindings/clock/idt,versaclock5.yaml @@ -45,7 +45,7 @@ description: | The case where SH and SP are both 1 is likely not very interesting. maintainers: - - Luca Ceresoli <luca@lucaceresoli.net> + - Luca Ceresoli <luca.ceresoli@bootlin.com> properties: compatible: diff --git a/dts/Bindings/clock/mediatek,apmixedsys.yaml b/dts/Bindings/clock/mediatek,apmixedsys.yaml new file mode 100644 index 0000000000..770546195f --- /dev/null +++ b/dts/Bindings/clock/mediatek,apmixedsys.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek AP Mixedsys Controller + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +description: + The Mediatek apmixedsys controller provides PLLs to the system. + The clock values can be found in <dt-bindings/clock/mt*-clk.h>. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-apmixedsys + - mediatek,mt7622-apmixedsys + - mediatek,mt7986-apmixedsys + - mediatek,mt8135-apmixedsys + - mediatek,mt8173-apmixedsys + - mediatek,mt8516-apmixedsys + - items: + - const: mediatek,mt7623-apmixedsys + - const: mediatek,mt2701-apmixedsys + - const: syscon + - items: + - enum: + - mediatek,mt2701-apmixedsys + - mediatek,mt2712-apmixedsys + - mediatek,mt6765-apmixedsys + - mediatek,mt6779-apmixedsys + - mediatek,mt7629-apmixedsys + - mediatek,mt8167-apmixedsys + - mediatek,mt8183-apmixedsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt8173-apmixedsys"; + reg = <0x10209000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/mediatek,topckgen.yaml b/dts/Bindings/clock/mediatek,topckgen.yaml new file mode 100644 index 0000000000..5b8b37a2e5 --- /dev/null +++ b/dts/Bindings/clock/mediatek,topckgen.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: MediaTek Top Clock Generator Controller + +maintainers: + - Michael Turquette <mturquette@baylibre.com> + - Stephen Boyd <sboyd@kernel.org> + +description: + The Mediatek topckgen controller provides various clocks to the system. + The clock values can be found in <dt-bindings/clock/mt*-clk.h>. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6797-topckgen + - mediatek,mt7622-topckgen + - mediatek,mt8135-topckgen + - mediatek,mt8173-topckgen + - mediatek,mt8516-topckgen + - items: + - const: mediatek,mt7623-topckgen + - const: mediatek,mt2701-topckgen + - const: syscon + - items: + - enum: + - mediatek,mt2701-topckgen + - mediatek,mt2712-topckgen + - mediatek,mt6765-topckgen + - mediatek,mt6779-topckgen + - mediatek,mt7629-topckgen + - mediatek,mt7986-topckgen + - mediatek,mt8167-topckgen + - mediatek,mt8183-topckgen + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + +required: + - compatible + - reg + - '#clock-cells' + +additionalProperties: false + +examples: + - | + topckgen: clock-controller@10000000 { + compatible = "mediatek,mt8173-topckgen"; + reg = <0x10000000 0x1000>; + #clock-cells = <1>; + }; diff --git a/dts/Bindings/clock/qcom,gcc-apq8064.yaml b/dts/Bindings/clock/qcom,gcc-apq8064.yaml index 97936411b6..9fafcb0800 100644 --- a/dts/Bindings/clock/qcom,gcc-apq8064.yaml +++ b/dts/Bindings/clock/qcom,gcc-apq8064.yaml @@ -20,12 +20,10 @@ description: | See also: - dt-bindings/clock/qcom,gcc-msm8960.h - dt-bindings/reset/qcom,gcc-msm8960.h - - dt-bindings/clock/qcom,gcc-apq8084.h - - dt-bindings/reset/qcom,gcc-apq8084.h properties: compatible: - const: qcom,gcc-apq8084 + const: qcom,gcc-apq8064 nvmem-cells: minItems: 1 diff --git a/dts/Bindings/clock/qcom,gcc-apq8084.yaml b/dts/Bindings/clock/qcom,gcc-apq8084.yaml new file mode 100644 index 0000000000..397fb918e0 --- /dev/null +++ b/dts/Bindings/clock/qcom,gcc-apq8084.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for APQ8084 + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + - Taniya Das <quic_tdas@quicinc.com> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on APQ8084. + + See also:: + - dt-bindings/clock/qcom,gcc-apq8084.h + - dt-bindings/reset/qcom,gcc-apq8084.h + +allOf: + - $ref: qcom,gcc.yaml# + +properties: + compatible: + const: qcom,gcc-apq8084 + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + clock-controller@fc400000 { + compatible = "qcom,gcc-apq8084"; + reg = <0xfc400000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml b/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml new file mode 100644 index 0000000000..0bcdc69c6f --- /dev/null +++ b/dts/Bindings/clock/qcom,gcc-sc8280xp.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Qualcomm global clock control module which supports the clocks, resets and + power domains on SC8280xp. + + See also: + - include/dt-bindings/clock/qcom,gcc-sc8280xp.h + +properties: + compatible: + const: qcom,gcc-sc8280xp + + clocks: + items: + - description: XO reference clock + - description: Sleep clock + - description: UFS memory first RX symbol clock + - description: UFS memory second RX symbol clock + - description: UFS memory first TX symbol clock + - description: UFS card first RX symbol clock + - description: UFS card second RX symbol clock + - description: UFS card first TX symbol clock + - description: Primary USB SuperSpeed pipe clock + - description: USB4 PHY pipegmux clock source + - description: USB4 PHY DP gmux clock source + - description: USB4 PHY sys piegmux clock source + - description: USB4 PHY PCIe pipe clock + - description: USB4 PHY router max pipe clock + - description: Primary USB4 RX0 clock + - description: Primary USB4 RX1 clock + - description: Secondary USB SuperSpeed pipe clock + - description: Second USB4 PHY pipegmux clock source + - description: Second USB4 PHY DP gmux clock source + - description: Second USB4 PHY sys pipegmux clock source + - description: Second USB4 PHY PCIe pipe clock + - description: Second USB4 PHY router max pipe clock + - description: Secondary USB4 RX0 clock + - description: Secondary USB4 RX1 clock + - description: Multiport USB first SupserSpeed pipe clock + - description: Multiport USB second SuperSpeed pipe clock + - description: PCIe 2a pipe clock + - description: PCIe 2b pipe clock + - description: PCIe 3a pipe clock + - description: PCIe 3b pipe clock + - description: PCIe 4 pipe clock + - description: First EMAC controller reference clock + - description: Second EMAC controller reference clock + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + protected-clocks: + maxItems: 389 + +required: + - compatible + - clocks + - reg + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sc8280xp"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&ufs_phy_rx_symbol_0_clk>, + <&ufs_phy_rx_symbol_1_clk>, + <&ufs_phy_tx_symbol_0_clk>, + <&ufs_card_rx_symbol_0_clk>, + <&ufs_card_rx_symbol_1_clk>, + <&ufs_card_tx_symbol_0_clk>, + <&usb_0_ssphy>, + <&gcc_usb4_phy_pipegmux_clk_src>, + <&gcc_usb4_phy_dp_gmux_clk_src>, + <&gcc_usb4_phy_sys_pipegmux_clk_src>, + <&usb4_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_gcc_usb4_rx0_clk>, + <&qusb4phy_gcc_usb4_rx1_clk>, + <&usb_1_ssphy>, + <&gcc_usb4_1_phy_pipegmux_clk_src>, + <&gcc_usb4_1_phy_dp_gmux_clk_src>, + <&gcc_usb4_1_phy_sys_pipegmux_clk_src>, + <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>, + <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>, + <&qusb4phy_1_gcc_usb4_rx0_clk>, + <&qusb4phy_1_gcc_usb4_rx1_clk>, + <&usb_2_ssphy>, + <&usb_3_ssphy>, + <&pcie2a_lane>, + <&pcie2b_lane>, + <&pcie3a_lane>, + <&pcie3b_lane>, + <&pcie4_lane>, + <&rxc0_ref_clk>, + <&rxc1_ref_clk>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +... diff --git a/dts/Bindings/clock/qcom,mmcc.yaml b/dts/Bindings/clock/qcom,mmcc.yaml index 4b79e89fd1..32e87014bb 100644 --- a/dts/Bindings/clock/qcom,mmcc.yaml +++ b/dts/Bindings/clock/qcom,mmcc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Multimedia Clock & Reset Controller Binding maintainers: - - Jeffrey Hugo <jhugo@codeaurora.org> + - Jeffrey Hugo <quic_jhugo@quicinc.com> - Taniya Das <tdas@codeaurora.org> description: | diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt deleted file mode 100644 index da295c3c00..0000000000 --- a/dts/Bindings/clock/qcom,rpmcc.txt +++ /dev/null @@ -1,63 +0,0 @@ -Qualcomm RPM Clock Controller Binding ------------------------------------------------- -The RPM is a dedicated hardware engine for managing the shared -SoC resources in order to keep the lowest power profile. It -communicates with other hardware subsystems via shared memory -and accepts clock requests, aggregates the requests and turns -the clocks on/off or scales them on demand. - -Required properties : -- compatible : shall contain only one of the following. The generic - compatible "qcom,rpmcc" should be also included. - - "qcom,rpmcc-mdm9607", "qcom,rpmcc" - "qcom,rpmcc-msm8660", "qcom,rpmcc" - "qcom,rpmcc-apq8060", "qcom,rpmcc" - "qcom,rpmcc-msm8226", "qcom,rpmcc" - "qcom,rpmcc-msm8916", "qcom,rpmcc" - "qcom,rpmcc-msm8936", "qcom,rpmcc" - "qcom,rpmcc-msm8953", "qcom,rpmcc" - "qcom,rpmcc-msm8974", "qcom,rpmcc" - "qcom,rpmcc-msm8976", "qcom,rpmcc" - "qcom,rpmcc-apq8064", "qcom,rpmcc" - "qcom,rpmcc-ipq806x", "qcom,rpmcc" - "qcom,rpmcc-msm8992",·"qcom,rpmcc" - "qcom,rpmcc-msm8994",·"qcom,rpmcc" - "qcom,rpmcc-msm8996", "qcom,rpmcc" - "qcom,rpmcc-msm8998", "qcom,rpmcc" - "qcom,rpmcc-qcm2290", "qcom,rpmcc" - "qcom,rpmcc-qcs404", "qcom,rpmcc" - "qcom,rpmcc-sdm660", "qcom,rpmcc" - "qcom,rpmcc-sm6115", "qcom,rpmcc" - "qcom,rpmcc-sm6125", "qcom,rpmcc" - -- #clock-cells : shall contain 1 - -The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> -and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock -is an "active" clock, which means that the consumer only care that the -clock is available when the apps CPU subsystem is active, i.e. not -suspended or in deep idle. If it is important that the clock keeps running -during system suspend, you need to specify the non-active clock, the one -not containing *_A_* in the enumerator name. - -Example: - smd { - compatible = "qcom,smd"; - - rpm { - interrupts = <0 168 1>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; - - rpm_requests { - compatible = "qcom,rpm-msm8916"; - qcom,smd-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; - #clock-cells = <1>; - }; - }; - }; - }; diff --git a/dts/Bindings/clock/qcom,rpmcc.yaml b/dts/Bindings/clock/qcom,rpmcc.yaml new file mode 100644 index 0000000000..9d296b89a8 --- /dev/null +++ b/dts/Bindings/clock/qcom,rpmcc.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM Clock Controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and + come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is + an "active" clock, which means that the consumer only care that the clock is + available when the apps CPU subsystem is active, i.e. not suspended or in + deep idle. If it is important that the clock keeps running during system + suspend, you need to specify the non-active clock, the one not containing + *_A_* in the enumerator name. + +properties: + compatible: + items: + - enum: + - qcom,rpmcc-apq8060 + - qcom,rpmcc-apq8064 + - qcom,rpmcc-ipq806x + - qcom,rpmcc-mdm9607 + - qcom,rpmcc-msm8226 + - qcom,rpmcc-msm8660 + - qcom,rpmcc-msm8916 + - qcom,rpmcc-msm8936 + - qcom,rpmcc-msm8953 + - qcom,rpmcc-msm8974 + - qcom,rpmcc-msm8976 + - qcom,rpmcc-msm8992 + - qcom,rpmcc-msm8994 + - qcom,rpmcc-msm8996 + - qcom,rpmcc-msm8998 + - qcom,rpmcc-qcm2290 + - qcom,rpmcc-qcs404 + - qcom,rpmcc-sdm660 + - qcom,rpmcc-sm6115 + - qcom,rpmcc-sm6125 + - const: qcom,rpmcc + + '#clock-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xo + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + rpm { + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; diff --git a/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml new file mode 100644 index 0000000000..bad9135489 --- /dev/null +++ b/dts/Bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core and audio clock control module which supports the + clocks and power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7280.h + - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h + +properties: + clocks: true + + clock-names: true + + compatible: + enum: + - qcom,sc7280-lpassaoncc + - qcom,sc7280-lpassaudiocc + - qcom,sc7280-lpasscorecc + - qcom,sc7280-lpasshm + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpassaudiocc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: lpass_aon_cc_main_rcg_clk_src + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpassaoncc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board XO active only source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: iface + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpasshm + - qcom,sc7280-lpasscorecc + + then: + properties: + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0x3300000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0x3c00000 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0x3900000 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0x3380000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao","iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/dts/Bindings/clock/renesas,cpg-mssr.yaml b/dts/Bindings/clock/renesas,cpg-mssr.yaml index e0b86214f0..e57bc40d30 100644 --- a/dts/Bindings/clock/renesas,cpg-mssr.yaml +++ b/dts/Bindings/clock/renesas,cpg-mssr.yaml @@ -49,6 +49,7 @@ properties: - renesas,r8a77995-cpg-mssr # R-Car D3 - renesas,r8a779a0-cpg-mssr # R-Car V3U - renesas,r8a779f0-cpg-mssr # R-Car S4-8 + - renesas,r8a779g0-cpg-mssr # R-Car V4H reg: maxItems: 1 diff --git a/dts/Bindings/clock/renesas,h8300-div-clock.txt b/dts/Bindings/clock/renesas,h8300-div-clock.txt deleted file mode 100644 index 399e0da223..0000000000 --- a/dts/Bindings/clock/renesas,h8300-div-clock.txt +++ /dev/null @@ -1,24 +0,0 @@ -* Renesas H8/300 divider clock - -Required Properties: - - - compatible: Must be "renesas,h8300-div-clock" - - - clocks: Reference to the parent clocks ("extal1" and "extal2") - - - #clock-cells: Must be 1 - - - reg: Base address and length of the divide rate selector - - - renesas,width: bit width of selector - -Example -------- - - cclk: cclk { - compatible = "renesas,h8300-div-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee01b 2>; - renesas,width = <2>; - }; diff --git a/dts/Bindings/clock/renesas,h8s2678-pll-clock.txt b/dts/Bindings/clock/renesas,h8s2678-pll-clock.txt deleted file mode 100644 index 500cdadbce..0000000000 --- a/dts/Bindings/clock/renesas,h8s2678-pll-clock.txt +++ /dev/null @@ -1,23 +0,0 @@ -Renesas H8S2678 PLL clock - -This device is Clock multiplyer - -Required Properties: - - - compatible: Must be "renesas,h8s2678-pll-clock" - - - clocks: Reference to the parent clocks - - - #clock-cells: Must be 0 - - - reg: Two rate selector (Multiply / Divide) register address - -Example -------- - - pllclk: pllclk { - compatible = "renesas,h8s2678-pll-clock"; - clocks = <&xclk>; - #clock-cells = <0>; - reg = <0xfee03b 2>, <0xfee045 2>; - }; diff --git a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml index 25dbb0fac0..95bf485c6c 100644 --- a/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml +++ b/dts/Bindings/clock/renesas,r9a06g032-sysctrl.yaml @@ -39,6 +39,17 @@ properties: '#power-domain-cells': const: 0 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-router@[a-f0-9]+$": + type: object + $ref: "../dma/renesas,rzn1-dmamux.yaml#" + required: - compatible - reg diff --git a/dts/Bindings/clock/renesas,rzg2l-cpg.yaml b/dts/Bindings/clock/renesas,rzg2l-cpg.yaml index bd3af8fc61..8880b834f2 100644 --- a/dts/Bindings/clock/renesas,rzg2l-cpg.yaml +++ b/dts/Bindings/clock/renesas,rzg2l-cpg.yaml @@ -4,14 +4,15 @@ $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" -title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode +title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> description: | - On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module - Standby Mode share the same register block. + On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module + Standby Mode share the same register block. On RZ/V2M, the functionality is + similar, but does not have Clock Monitor Registers. They provide the following functionalities: - The CPG block generates various core clocks, @@ -23,8 +24,10 @@ description: | properties: compatible: enum: - - renesas,r9a07g044-cpg # RZ/G2{L,LC} - - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} + - renesas,r9a07g044-cpg # RZ/G2{L,LC} + - renesas,r9a07g054-cpg # RZ/V2L + - renesas,r9a09g011-cpg # RZ/V2M reg: maxItems: 1 @@ -42,9 +45,10 @@ properties: description: | - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" and a core clock reference, as defined in - <dt-bindings/clock/r9a07g*-cpg.h> + <dt-bindings/clock/r9a0*-cpg.h> - For module clocks, the two clock specifier cells must be "CPG_MOD" and - a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>. + a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h> or + <dt-bindings/clock/r9a09g011-cpg.h>. const: 2 '#power-domain-cells': @@ -58,7 +62,7 @@ properties: '#reset-cells': description: The single reset specifier cell must be the module number, as defined in - the <dt-bindings/clock/r9a07g0*-cpg.h>. + the <dt-bindings/clock/r9a07g0*-cpg.h> or <dt-bindings/clock/r9a09g011-cpg.h>. const: 1 required: diff --git a/dts/Bindings/clock/rockchip,px30-cru.txt b/dts/Bindings/clock/rockchip,px30-cru.txt deleted file mode 100644 index 55e78cddec..0000000000 --- a/dts/Bindings/clock/rockchip,px30-cru.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Rockchip PX30 Clock and Reset Unit - -The PX30 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: PMU for CRU should be "rockchip,px30-pmu-cru" -- compatible: CRU should be "rockchip,px30-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- clocks: A list of phandle + clock-specifier pairs for the clocks listed - in clock-names -- clock-names: Should contain the following: - - "xin24m" for both PMUCRU and CRU - - "gpll" for CRU (sourced from PMUCRU) -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "i2sx_clkin" - external I2S clock - optional, - - "gmac_clkin" - external GMAC clock - optional - -Example: Clock controller node: - - pmucru: clock-controller@ff2bc000 { - compatible = "rockchip,px30-pmucru"; - reg = <0x0 0xff2bc000 0x0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - cru: clock-controller@ff2b0000 { - compatible = "rockchip,px30-cru"; - reg = <0x0 0xff2b0000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff030000 { - compatible = "rockchip,px30-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff030000 0x0 0x100>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>; - clock-names = "baudclk", "apb_pclk"; - reg-shift = <2>; - reg-io-width = <4>; - }; diff --git a/dts/Bindings/clock/rockchip,px30-cru.yaml b/dts/Bindings/clock/rockchip,px30-cru.yaml new file mode 100644 index 0000000000..3eec381c7c --- /dev/null +++ b/dts/Bindings/clock/rockchip,px30-cru.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PX30 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The PX30 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "i2sx_clkin" - external I2S clock - optional + - "gmac_clkin" - external GMAC clock - optional + +properties: + compatible: + enum: + - rockchip,px30-cru + - rockchip,px30-pmucru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 1 + items: + - description: Clock for both PMUCRU and CRU + - description: Clock for CRU (sourced from PMUCRU) + + clock-names: + minItems: 1 + items: + - const: xin24m + - const: gpll + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + - "#reset-cells" + +allOf: + - if: + properties: + compatible: + contains: + const: rockchip,px30-cru + + then: + properties: + clocks: + minItems: 2 + + clock-names: + minItems: 2 + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + + pmucru: clock-controller@ff2bc000 { + compatible = "rockchip,px30-pmucru"; + reg = <0xff2bc000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff2b0000 { + compatible = "rockchip,px30-cru"; + reg = <0xff2b0000 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3036-cru.txt b/dts/Bindings/clock/rockchip,rk3036-cru.txt deleted file mode 100644 index 20df350b9e..0000000000 --- a/dts/Bindings/clock/rockchip,rk3036-cru.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Rockchip RK3036 Clock and Reset Unit - -The RK3036 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3036-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "rmii_clkin" - external EMAC clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3036-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@20060000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20060000 0x100>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3036-cru.yaml b/dts/Bindings/clock/rockchip,rk3036-cru.yaml new file mode 100644 index 0000000000..1376230fed --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3036-cru.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3036 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3036 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "rmii_clkin" - external EMAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3036-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3036-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3188-cru.txt b/dts/Bindings/clock/rockchip,rk3188-cru.txt deleted file mode 100644 index 7f368530a2..0000000000 --- a/dts/Bindings/clock/rockchip,rk3188-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3188/RK3066 Clock and Reset Unit - -The RK3188/RK3066 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or - "rockchip,rk3066a-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3188-cru.h and -dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. -Similar macros exist for the reset sources in these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "xin27m" - 27mhz crystal input on rk3066 - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_cif0" - external camera clock - optional, - - "ext_rmii" - external RMII clock - optional, - - "ext_jtag" - externalJTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3188-cru.yaml b/dts/Bindings/clock/rockchip,rk3188-cru.yaml new file mode 100644 index 0000000000..ddd7e46af0 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3188-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3188/RK3066 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3188-cru.h and + dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources. + Similar macros exist for the reset sources in these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - RTC clock - optional + - "xin27m" - 27mhz crystal input on RK3066 - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_cif0" - external camera clock - optional + - "ext_rmii" - external RMII clock - optional + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3066a-cru + - rockchip,rk3188-cru + - rockchip,rk3188a-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3228-cru.txt b/dts/Bindings/clock/rockchip,rk3228-cru.txt deleted file mode 100644 index f323048127..0000000000 --- a/dts/Bindings/clock/rockchip,rk3228-cru.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Rockchip RK3228 Clock and Reset Unit - -The RK3228 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3228-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional - - "ext_hsadc" - external HSADC clock - optional - - "phy_50m_out" - output clock of the pll in the mac phy - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3228-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10110000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10110000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3228-cru.yaml b/dts/Bindings/clock/rockchip,rk3228-cru.yaml new file mode 100644 index 0000000000..cf7dc01d94 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3228-cru.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3228 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3228 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +properties: + compatible: + enum: + - rockchip,rk3228-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20000000 { + compatible = "rockchip,rk3228-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3288-cru.txt b/dts/Bindings/clock/rockchip,rk3288-cru.txt deleted file mode 100644 index bf3a9ec192..0000000000 --- a/dts/Bindings/clock/rockchip,rk3288-cru.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Rockchip RK3288 Clock and Reset Unit - -The RK3288 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -A revision of this SoC is available: rk3288w. The clock tree is a bit -different so another dt-compatible is available. Noticed that it is only -setting the difference but there is no automatic revision detection. This -should be performed by bootloaders. - -Required Properties: - -- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in - case of this revision of Rockchip rk3288. -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_hsadc" - external HSADC clock - optional, - - "ext_edp_24m" - external display port clock - optional, - - "ext_vip" - external VIP clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - -Example: Clock controller node: - - cru: cru@20000000 { - compatible = "rockchip,rk3188-cru"; - reg = <0x20000000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3288-cru.yaml b/dts/Bindings/clock/rockchip,rk3288-cru.yaml new file mode 100644 index 0000000000..96bc05749e --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3288-cru.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3288 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3288 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + + A revision of this SoC is available: rk3288w. The clock tree is a bit + different so another dt-compatible is available. Noticed that it is only + setting the difference but there is no automatic revision detection. This + should be performed by boot loaders. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_hsadc" - external HSADC clock - optional, + - "ext_edp_24m" - external display port clock - optional, + - "ext_vip" - external VIP clock - optional, + - "ext_isp" - external ISP clock - optional, + - "ext_jtag" - external JTAG clock - optional + +properties: + compatible: + enum: + - rockchip,rk3288-cru + - rockchip,rk3288w-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3288-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3308-cru.txt b/dts/Bindings/clock/rockchip,rk3308-cru.txt deleted file mode 100644 index 9b151c5b0c..0000000000 --- a/dts/Bindings/clock/rockchip,rk3308-cru.txt +++ /dev/null @@ -1,60 +0,0 @@ -* Rockchip RK3308 Clock and Reset Unit - -The RK3308 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: CRU should be "rockchip,rk3308-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in", - "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in", - "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional, - - "mac_clkin" - external MAC clock - optional - -Example: Clock controller node: - - cru: clock-controller@ff500000 { - compatible = "rockchip,rk3308-cru"; - reg = <0x0 0xff500000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@ff0a0000 { - compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; - reg = <0x0 0xff0a0000 0x0 0x100>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; - clock-names = "baudclk", "apb_pclk"; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; diff --git a/dts/Bindings/clock/rockchip,rk3308-cru.yaml b/dts/Bindings/clock/rockchip,rk3308-cru.yaml new file mode 100644 index 0000000000..523ee578a5 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3308-cru.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3308 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3308 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", + "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in", + "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or + SPDIF clock - optional + - "mac_clkin" - external MAC clock - optional + +properties: + compatible: + enum: + - rockchip,rk3308-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0xff500000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3368-cru.txt b/dts/Bindings/clock/rockchip,rk3368-cru.txt deleted file mode 100644 index 7c8bbcfed8..0000000000 --- a/dts/Bindings/clock/rockchip,rk3368-cru.txt +++ /dev/null @@ -1,61 +0,0 @@ -* Rockchip RK3368 Clock and Reset Unit - -The RK3368 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rk3368-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing, pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "ext_i2s" - external I2S clock - optional, - - "ext_gmac" - external GMAC clock - optional - - "ext_hsadc" - external HSADC clock - optional, - - "ext_isp" - external ISP clock - optional, - - "ext_jtag" - external JTAG clock - optional - - "ext_vip" - external VIP clock - optional, - - "usbotg_out" - output clock of the pll in the otg phy - -Example: Clock controller node: - - cru: clock-controller@ff760000 { - compatible = "rockchip,rk3368-cru"; - reg = <0x0 0xff760000 0x0 0x1000>; - rockchip,grf = <&grf>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rk3368-cru.yaml b/dts/Bindings/clock/rockchip,rk3368-cru.yaml new file mode 100644 index 0000000000..adb6787772 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk3368-cru.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3368 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RK3368 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "xin32k" - rtc clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional + - "ext_isp" - external ISP clock - optional + - "ext_jtag" - external JTAG clock - optional + - "ext_vip" - external VIP clock - optional + - "usbotg_out" - output clock of the pll in the otg phy + +properties: + compatible: + enum: + - rockchip,rk3368-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/rockchip,rk3399-cru.yaml b/dts/Bindings/clock/rockchip,rk3399-cru.yaml index 72b286a1be..54da1e31ea 100644 --- a/dts/Bindings/clock/rockchip,rk3399-cru.yaml +++ b/dts/Bindings/clock/rockchip,rk3399-cru.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip RK3399 Clock and Reset Unit maintainers: - - Xing Zheng <zhengxing@rock-chips.com> + - Elaine Zhang <zhangqing@rock-chips.com> - Heiko Stuebner <heiko@sntech.de> description: | @@ -22,11 +22,11 @@ description: | There are several clocks that are generated outside the SoC. It is expected that they are defined using standard clock bindings with following clock-output-names: - - "xin24m" - crystal input - required, - - "xin32k" - rtc clock - optional, - - "clkin_gmac" - external GMAC clock - optional, - - "clkin_i2s" - external I2S clock - optional, - - "pclkin_cif" - external ISP clock - optional, + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "clkin_gmac" - external GMAC clock - optional, + - "clkin_i2s" - external I2S clock - optional, + - "pclkin_cif" - external ISP clock - optional, - "clk_usbphy0_480m" - output clock of the pll in the usbphy0 - "clk_usbphy1_480m" - output clock of the pll in the usbphy1 @@ -46,24 +46,15 @@ properties: const: 1 clocks: - minItems: 1 - - assigned-clocks: - minItems: 1 - maxItems: 64 - - assigned-clock-parents: - minItems: 1 - maxItems: 64 + maxItems: 1 - assigned-clock-rates: - minItems: 1 - maxItems: 64 + clock-names: + const: xin24m rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle - description: > - phandle to the syscon managing the "general register files". It is used + description: + Phandle to the syscon managing the "general register files". It is used for GRF muxes, if missing any muxes present in the GRF will not be available. @@ -77,7 +68,7 @@ additionalProperties: false examples: - | - pmucru: pmu-clock-controller@ff750000 { + pmucru: clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0xff750000 0x1000>; #clock-cells = <1>; diff --git a/dts/Bindings/clock/rockchip,rk3568-cru.yaml b/dts/Bindings/clock/rockchip,rk3568-cru.yaml index b2c2609782..fc7546f521 100644 --- a/dts/Bindings/clock/rockchip,rk3568-cru.yaml +++ b/dts/Bindings/clock/rockchip,rk3568-cru.yaml @@ -34,6 +34,19 @@ properties: "#reset-cells": const: 1 + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + required: - compatible - reg diff --git a/dts/Bindings/clock/rockchip,rv1108-cru.txt b/dts/Bindings/clock/rockchip,rv1108-cru.txt deleted file mode 100644 index 161326a4f9..0000000000 --- a/dts/Bindings/clock/rockchip,rv1108-cru.txt +++ /dev/null @@ -1,59 +0,0 @@ -* Rockchip RV1108 Clock and Reset Unit - -The RV1108 clock controller generates and supplies clock to various -controllers within the SoC and also implements a reset controller for SoC -peripherals. - -Required Properties: - -- compatible: should be "rockchip,rv1108-cru" -- reg: physical base address of the controller and length of memory mapped - region. -- #clock-cells: should be 1. -- #reset-cells: should be 1. - -Optional Properties: - -- rockchip,grf: phandle to the syscon managing the "general register files" - If missing pll rates are not changeable, due to the missing pll lock status. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. All available clocks are defined as -preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be -used in device tree sources. Similar macros exist for the reset sources in -these files. - -External clocks: - -There are several clocks that are generated outside the SoC. It is expected -that they are defined using standard clock bindings with following -clock-output-names: - - "xin24m" - crystal input - required, - - "ext_vip" - external VIP clock - optional - - "ext_i2s" - external I2S clock - optional - - "ext_gmac" - external GMAC clock - optional - - "hdmiphy" - external clock input derived from HDMI PHY - optional - - "usbphy" - external clock input derived from USB PHY - optional - -Example: Clock controller node: - - cru: cru@20200000 { - compatible = "rockchip,rv1108-cru"; - reg = <0x20200000 0x1000>; - rockchip,grf = <&grf>; - - #clock-cells = <1>; - #reset-cells = <1>; - }; - -Example: UART controller node that consumes the clock generated by the clock - controller: - - uart0: serial@10230000 { - compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart"; - reg = <0x10230000 0x100>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&cru SCLK_UART0>; - }; diff --git a/dts/Bindings/clock/rockchip,rv1108-cru.yaml b/dts/Bindings/clock/rockchip,rv1108-cru.yaml new file mode 100644 index 0000000000..20421c22f1 --- /dev/null +++ b/dts/Bindings/clock/rockchip,rv1108-cru.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1108 Clock and Reset Unit (CRU) + +maintainers: + - Elaine Zhang <zhangqing@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: | + The RV1108 clock controller generates and supplies clocks to various + controllers within the SoC and also implements a reset controller for SoC + peripherals. + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All available clocks are defined as + preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be + used in device tree sources. Similar macros exist for the reset sources in + these files. + There are several clocks that are generated outside the SoC. It is expected + that they are defined using standard clock bindings with following + clock-output-names: + - "xin24m" - crystal input - required + - "ext_vip" - external VIP clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "hdmiphy" - external clock input derived from HDMI PHY - optional + - "usbphy" - external clock input derived from USB PHY - optional + +properties: + compatible: + enum: + - rockchip,rv1108-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "general register files" (GRF), + if missing pll rates are not changeable, due to the missing pll + lock status. + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + cru: clock-controller@20200000 { + compatible = "rockchip,rv1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml b/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml index b644bbd0df..bee13436d1 100644 --- a/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml +++ b/dts/Bindings/clock/samsung,exynos4412-isp-clock.yaml @@ -61,4 +61,3 @@ examples: clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; clock-names = "aclk200", "aclk400_mcuisp"; }; - diff --git a/dts/Bindings/clock/samsung,exynosautov9-clock.yaml b/dts/Bindings/clock/samsung,exynosautov9-clock.yaml new file mode 100644 index 0000000000..eafc715d2d --- /dev/null +++ b/dts/Bindings/clock/samsung,exynosautov9-clock.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Auto v9 SoC clock controller + +maintainers: + - Chanho Park <chanho61.park@samsung.com> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Exynos Auto v9 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz). + The external OSCCLK must be defined as fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynosautov9.h' header. + +properties: + compatible: + enum: + - samsung,exynosautov9-cmu-top + - samsung,exynosautov9-cmu-busmc + - samsung,exynosautov9-cmu-core + - samsung,exynosautov9-cmu-fsys2 + - samsung,exynosautov9-cmu-peric0 + - samsung,exynosautov9-cmu-peric1 + - samsung,exynosautov9-cmu-peris + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-busmc + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_BUSMC bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_busmc_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_core_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys2 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS2 bus clock (from CMU_TOP) + - description: UFS clock (from CMU_TOP) + - description: Ethernet clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys2_bus + - const: dout_fsys2_clkcmu_ufs_embd + - const: dout_fsys2_clkcmu_ethernet + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC0 bus clock (from CMU_TOP) + - description: PERIC0 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric0_bus + - const: dout_clkcmu_peric0_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC1 bus clock (from CMU_TOP) + - description: PERIC1 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric1_bus + - const: dout_clkcmu_peric1_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peris + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIS bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peris_bus + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_FSYS2 + - | + #include <dt-bindings/clock/samsung,exynosautov9.h> + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + +... diff --git a/dts/Bindings/clock/st,stm32mp1-rcc.yaml b/dts/Bindings/clock/st,stm32mp1-rcc.yaml index a0ae4867ed..f8c4742278 100644 --- a/dts/Bindings/clock/st,stm32mp1-rcc.yaml +++ b/dts/Bindings/clock/st,stm32mp1-rcc.yaml @@ -41,6 +41,7 @@ description: | The list of valid indices for STM32MP1 is available in: include/dt-bindings/reset-controller/stm32mp1-resets.h + include/dt-bindings/reset-controller/stm32mp13-resets.h This file implements defines like: #define LTDC_R 3072 @@ -57,7 +58,10 @@ properties: - enum: - st,stm32mp1-rcc-secure - st,stm32mp1-rcc + - st,stm32mp13-rcc - const: syscon + clocks: true + clock-names: true reg: maxItems: 1 @@ -68,14 +72,53 @@ required: - compatible - reg +if: + properties: + compatible: + contains: + enum: + - st,stm32mp1-rcc-secure +then: + properties: + clocks: + description: Specifies oscillators. + maxItems: 5 + + clock-names: + items: + - const: hse + - const: hsi + - const: csi + - const: lse + - const: lsi + required: + - clocks + - clock-names +else: + properties: + clocks: + description: + Specifies the external RX clock for ethernet MAC. + maxItems: 1 + + clock-names: + const: ETH_RX_CLK/ETH_REF_CLK + additionalProperties: false examples: - | + #include <dt-bindings/clock/stm32mp1-clks.h> rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc-secure", "syscon"; reg = <0x50000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; }; ... diff --git a/dts/Bindings/clock/stericsson,u8500-clks.yaml b/dts/Bindings/clock/stericsson,u8500-clks.yaml index 9bc95a3084..2150307219 100644 --- a/dts/Bindings/clock/stericsson,u8500-clks.yaml +++ b/dts/Bindings/clock/stericsson,u8500-clks.yaml @@ -109,6 +109,25 @@ properties: additionalProperties: false + clkout-clock: + description: A subnode with three clock cells for externally routed clocks, + output clocks. These are two PRCMU-internal clocks that can be divided and + muxed out on the pads of the DB8500 SoC. + type: object + + properties: + '#clock-cells': + description: + The first cell indicates which output clock we are using, + possible values are 0 (CLKOUT1) and 1 (CLKOUT2). + The second cell indicates which clock we want to use as source, + possible values are 0 thru 7, see the defines for the different + source clocks. + The third cell is a divider, legal values are 1 thru 63. + const: 3 + + additionalProperties: false + required: - compatible - reg @@ -119,3 +138,41 @@ required: - smp-twd-clock additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ste-db8500-clkout.h> + clocks@8012 { + compatible = "stericsson,u8500-clks"; + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + prcc_reset: prcc-reset-controller { + #reset-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + + clkout_clk: clkout-clock { + #clock-cells = <3>; + }; + }; diff --git a/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml index 9b537bc876..66765116af 100644 --- a/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml +++ b/dts/Bindings/clock/ti,am654-ehrpwm-tbclk.yaml @@ -15,6 +15,7 @@ properties: - enum: - ti,am654-ehrpwm-tbclk - ti,am64-epwm-tbclk + - ti,am62-epwm-tbclk - const: syscon "#clock-cells": diff --git a/dts/Bindings/clock/ti-clkctrl.txt b/dts/Bindings/clock/ti-clkctrl.txt index 18af6b9409..d20db7974a 100644 --- a/dts/Bindings/clock/ti-clkctrl.txt +++ b/dts/Bindings/clock/ti-clkctrl.txt @@ -21,6 +21,7 @@ Required properties : "ti,clkctrl-l4-per" "ti,clkctrl-l4-secure" "ti,clkctrl-l4-wkup" +- clock-output-names : from common clock binding - #clock-cells : shall contain 2 with the first entry being the instance offset from the clock domain base and the second being the clock index @@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430: l4per: cm@1400 { cm_l4per@0 { cm_l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per"; reg = <0x20 0x1b0>; #clock-cells = <2>; }; diff --git a/dts/Bindings/clock/ti/clockdomain.txt b/dts/Bindings/clock/ti/clockdomain.txt index cb76b3f2b3..9c6199249c 100644 --- a/dts/Bindings/clock/ti/clockdomain.txt +++ b/dts/Bindings/clock/ti/clockdomain.txt @@ -17,6 +17,9 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of clocks within this domain +Optional properties: +- clock-output-names : from common clock binding. + Examples: dss_clkdm: dss_clkdm { compatible = "ti,clockdomain"; diff --git a/dts/Bindings/clock/ti/composite.txt b/dts/Bindings/clock/ti/composite.txt index 5f43c4706b..33ac7c9ad0 100644 --- a/dts/Bindings/clock/ti/composite.txt +++ b/dts/Bindings/clock/ti/composite.txt @@ -27,6 +27,9 @@ Required properties: - clocks : link phandles of component clocks - #clock-cells : from common clock binding; shall be set to 0. +Optional properties: +- clock-output-names : from common clock binding. + Examples: usb_l4_gate_ick: usb_l4_gate_ick { diff --git a/dts/Bindings/clock/ti/fixed-factor-clock.txt b/dts/Bindings/clock/ti/fixed-factor-clock.txt index 662b36d53b..518e3c1422 100644 --- a/dts/Bindings/clock/ti/fixed-factor-clock.txt +++ b/dts/Bindings/clock/ti/fixed-factor-clock.txt @@ -16,6 +16,7 @@ Required properties: - clocks: parent clock. Optional properties: +- clock-output-names : from common clock binding. - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, see [2] - reg: offset for the autoidle register of this clock, see [2] diff --git a/dts/Bindings/clock/ti/gate.txt b/dts/Bindings/clock/ti/gate.txt index 56d603c1f7..b4820b1de4 100644 --- a/dts/Bindings/clock/ti/gate.txt +++ b/dts/Bindings/clock/ti/gate.txt @@ -36,6 +36,7 @@ Required properties: ti,clkdm-gate-clock type Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for programming the clock gate, invalid for ti,clkdm-gate-clock type - ti,set-bit-to-disable : inverts default gate programming. Setting the bit diff --git a/dts/Bindings/clock/ti/interface.txt b/dts/Bindings/clock/ti/interface.txt index 3f47040401..94ec77dc3c 100644 --- a/dts/Bindings/clock/ti/interface.txt +++ b/dts/Bindings/clock/ti/interface.txt @@ -28,6 +28,7 @@ Required properties: - reg : base address for the control register Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) Examples: diff --git a/dts/Bindings/clock/ti/mux.txt b/dts/Bindings/clock/ti/mux.txt index eec8994b9b..e17425a586 100644 --- a/dts/Bindings/clock/ti/mux.txt +++ b/dts/Bindings/clock/ti/mux.txt @@ -42,6 +42,7 @@ Required properties: - reg : register offset for register controlling adjustable mux Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : number of bits to shift the bit-mask, defaults to 0 if not present - ti,index-starts-at-one : valid input select programming starts at 1, not |