1 files changed, 157 insertions, 0 deletions
diff --git a/dts/Bindings/crypto/fsl-sec6.txt b/dts/Bindings/crypto/fsl-sec6.txt
new file mode 100644
index 0000000000..c0a20cd972
--- /dev/null
+++ b/dts/Bindings/crypto/fsl-sec6.txt
@@ -0,0 +1,157 @@
+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embeded with SEC 6.
+SEC 6 device tree binding include:
+   -SEC 6 Node
+   -Job Ring Node
+   -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+    Node defines the base address of the SEC 6 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 6 block.
+    For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0".
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC 6 configuration registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 6.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+EXAMPLE
+	crypto@a0000 {
+		compatible = "fsl,sec-v6.0";
+		fsl,sec-era = <6>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 6
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0-job-ring".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+           the parent physical address and the length the JR registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <49 2 0 0>;
+	};
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself.  A chip using the SEC
+should include the dtsi inside each SEC node.  Example:
+
+In qoriq-sec6.0.dtsi:
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
+
+In the C293 device tree, we add the include of public property:
+
+	crypto@a0000 {
+		/include/ "qoriq-sec6.0.dtsi"
+	}
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <49 2 0 0>;
+		};
+
+		jr@2000 {
+			interrupts = <50 2 0 0>;
+		};
+	};