diff options
Diffstat (limited to 'dts/Bindings/devfreq/rk3399_dmc.txt')
| -rw-r--r-- | dts/Bindings/devfreq/rk3399_dmc.txt | 75 |
1 files changed, 36 insertions, 39 deletions
diff --git a/dts/Bindings/devfreq/rk3399_dmc.txt b/dts/Bindings/devfreq/rk3399_dmc.txt index a10d1f6d85..ac189dd82b 100644 --- a/dts/Bindings/devfreq/rk3399_dmc.txt +++ b/dts/Bindings/devfreq/rk3399_dmc.txt @@ -12,6 +12,8 @@ Required properties: for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. +- rockchip,pmu: Phandle to the syscon managing the "PMU general register + files". Optional properties: - interrupts: The CPU interrupt number. The interrupt specifier @@ -77,24 +79,23 @@ Following properties relate to DDR timing: - rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines the DRAM side driver strength in ohms. Default - value is DDR3_DS_40ohm. + value is 40. - rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines the DRAM side ODT strength in ohms. Default value - is DDR3_ODT_120ohm. + is 120. - rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines the phy side CA line (incluing command line, address line and clock line) driver strength. - Default value is PHY_DRV_ODT_40. + Default value is 40. - rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is PHY_DRV_ODT_40. + driver strength. Default value is 40. - rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines - the PHY side ODT strength. Default value is - PHY_DRV_ODT_240. + the PHY side ODT strength. Default value is 240. - rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines then ODT disable frequency in MHz (Mega Hz). @@ -104,25 +105,23 @@ Following properties relate to DDR timing: - rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines the DRAM side driver strength in ohms. Default - value is LP3_DS_34ohm. + value is 34. - rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT strength in ohms. Default value - is LP3_ODT_240ohm. + is 240. - rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines the PHY side CA line (including command line, address line and clock line) driver strength. - Default value is PHY_DRV_ODT_40. + Default value is 40. - rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is - PHY_DRV_ODT_40. + driver strength. Default value is 40. - rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define - the phy side odt strength, default value is - PHY_DRV_ODT_240. + the phy side odt strength, default value is 240. - rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter defines the ODT disable frequency in @@ -132,32 +131,30 @@ Following properties relate to DDR timing: - rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines the DRAM side driver strength in ohms. Default - value is LP4_PDDS_60ohm. + value is 60. - rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on DQS/DQ line strength in ohms. - Default value is LP4_DQ_ODT_40ohm. + Default value is 40. - rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on CA line strength in ohms. - Default value is LP4_CA_ODT_40ohm. + Default value is 40. - rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines the PHY side CA line (including command address - line) driver strength. Default value is - PHY_DRV_ODT_40. + line) driver strength. Default value is 40. - rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines the PHY side clock line and CS line driver - strength. Default value is PHY_DRV_ODT_80. + strength. Default value is 80. - rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is PHY_DRV_ODT_80. + driver strength. Default value is 80. - rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines - the PHY side ODT strength. Default value is - PHY_DRV_ODT_60. + the PHY side ODT strength. Default value is 60. Example: dmc_opp_table: dmc_opp_table { @@ -193,23 +190,23 @@ Example: rockchip,phy_dll_dis_freq = <125>; rockchip,auto_pd_dis_freq = <666>; rockchip,ddr3_odt_dis_freq = <333>; - rockchip,ddr3_drv = <DDR3_DS_40ohm>; - rockchip,ddr3_odt = <DDR3_ODT_120ohm>; - rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>; - rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>; - rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>; + rockchip,ddr3_drv = <40>; + rockchip,ddr3_odt = <120>; + rockchip,phy_ddr3_ca_drv = <40>; + rockchip,phy_ddr3_dq_drv = <40>; + rockchip,phy_ddr3_odt = <240>; rockchip,lpddr3_odt_dis_freq = <333>; - rockchip,lpddr3_drv = <LP3_DS_34ohm>; - rockchip,lpddr3_odt = <LP3_ODT_240ohm>; - rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>; - rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>; - rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>; + rockchip,lpddr3_drv = <34>; + rockchip,lpddr3_odt = <240>; + rockchip,phy_lpddr3_ca_drv = <40>; + rockchip,phy_lpddr3_dq_drv = <40>; + rockchip,phy_lpddr3_odt = <240>; rockchip,lpddr4_odt_dis_freq = <333>; - rockchip,lpddr4_drv = <LP4_PDDS_60ohm>; - rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>; - rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>; - rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>; - rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>; - rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>; - rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>; + rockchip,lpddr4_drv = <60>; + rockchip,lpddr4_dq_odt = <40>; + rockchip,lpddr4_ca_odt = <40>; + rockchip,phy_lpddr4_ca_drv = <40>; + rockchip,phy_lpddr4_ck_cs_drv = <80>; + rockchip,phy_lpddr4_dq_drv = <80>; + rockchip,phy_lpddr4_odt = <60>; }; |