diff options
Diffstat (limited to 'dts/Bindings/display/bridge/sii9234.txt')
| -rw-r--r-- | dts/Bindings/display/bridge/sii9234.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/dts/Bindings/display/bridge/sii9234.txt b/dts/Bindings/display/bridge/sii9234.txt deleted file mode 100644 index a55bf77bd9..0000000000 --- a/dts/Bindings/display/bridge/sii9234.txt +++ /dev/null @@ -1,49 +0,0 @@ -Silicon Image SiI9234 HDMI/MHL bridge bindings - -Required properties: - - compatible : "sil,sii9234". - - reg : I2C address for TPI interface, use 0x39 - - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) - - iovcc18-supply : I/O Supply Voltage (1.8V) - - avcc12-supply : TMDS Analog Supply Voltage (1.2V) - - cvcc12-supply : Digital Core Supply Voltage (1.2V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin (active low) - - video interfaces: Device node can contain two video interface port - nodes for HDMI encoder and connector according to [1]. - - port@0 - MHL to HDMI - - port@1 - MHL to connector - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example: - sii9234@39 { - compatible = "sil,sii9234"; - reg = <0x39>; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - port@1 { - reg = <1>; - mhl_to_connector: endpoint { - remote-endpoint = <&connector_to_mhl>; - }; - }; - }; - }; |