summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display/bridge/thine,thc63lvd1024.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display/bridge/thine,thc63lvd1024.txt')
-rw-r--r--dts/Bindings/display/bridge/thine,thc63lvd1024.txt60
1 files changed, 60 insertions, 0 deletions
diff --git a/dts/Bindings/display/bridge/thine,thc63lvd1024.txt b/dts/Bindings/display/bridge/thine,thc63lvd1024.txt
new file mode 100644
index 0000000..37f0c04
--- /dev/null
+++ b/dts/Bindings/display/bridge/thine,thc63lvd1024.txt
@@ -0,0 +1,60 @@
+Thine Electronics THC63LVD1024 LVDS decoder
+-------------------------------------------
+
+The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
+to parallel data outputs. The chip supports single/dual input/output modes,
+handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
+
+Single or dual operation mode, output data mapping and DDR output modes are
+configured through input signals and the chip does not expose any control bus.
+
+Required properties:
+- compatible: Shall be "thine,thc63lvd1024"
+- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
+ PPL and digital circuitry
+
+Optional properties:
+- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
+- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
+
+The THC63LVD1024 video port connections are modeled according
+to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
+
+Required video port nodes:
+- port@0: First LVDS input port
+- port@2: First digital CMOS/TTL parallel output
+
+Optional video port nodes:
+- port@1: Second LVDS input port
+- port@3: Second digital CMOS/TTL parallel output
+
+Example:
+--------
+
+ thc63lvd1024: lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+
+ vcc-supply = <&reg_lvds_vcc>;
+ powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in_0: endpoint {
+ remote-endpoint = <&lvds_out>;
+ };
+ };
+
+ port@2{
+ reg = <2>;
+
+ lvds_dec_out_2: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };