3 files changed, 51 insertions, 1 deletions
diff --git a/dts/Bindings/display/bridge/dumb-vga-dac.txt b/dts/Bindings/display/bridge/dumb-vga-dac.txt
index 003bc246a2..164cbb15f0 100644
--- a/dts/Bindings/display/bridge/dumb-vga-dac.txt
+++ b/dts/Bindings/display/bridge/dumb-vga-dac.txt
@@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
 - Video port 0 for RGB input
 - Video port 1 for VGA output
 
+Optional properties:
+- vdd-supply: Power supply for DAC
 
 Example
 -------
diff --git a/dts/Bindings/display/bridge/dw_hdmi.txt b/dts/Bindings/display/bridge/dw_hdmi.txt
index dc1452f0d5..5e9a84d6e5 100644
--- a/dts/Bindings/display/bridge/dw_hdmi.txt
+++ b/dts/Bindings/display/bridge/dw_hdmi.txt
@@ -19,7 +19,9 @@ Required properties:
 
 Optional properties
 - reg-io-width: the width of the reg:1,4, default set to 1 if not present
-- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing,
+  if the property is omitted, a functionally reduced I2C bus
+  controller on DW HDMI is probed
 - clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
 
 Example:
diff --git a/dts/Bindings/display/bridge/ti,tfp410.txt b/dts/Bindings/display/bridge/ti,tfp410.txt
new file mode 100644
index 0000000000..54d7e31525
--- /dev/null
+++ b/dts/Bindings/display/bridge/ti,tfp410.txt
@@ -0,0 +1,46 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+- reg: I2C address. If and only if present the device node
+       should be placed into the i2c controller node where the
+       tfp410 i2c is connected to.
+
+Required nodes:
+- Video port 0 for DPI input [1].
+- Video port 1 for DVI output [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example
+-------
+
+tfp410: encoder@0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint@0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint@0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};