1 files changed, 0 insertions, 51 deletions
diff --git a/dts/Bindings/display/exynos/exynos-mic.txt b/dts/Bindings/display/exynos/exynos-mic.txt
deleted file mode 100644
index 0fba2ee644..0000000000
--- a/dts/Bindings/display/exynos/exynos-mic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
-
-MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
-not capable to transfer high resoltuion frame data as decon can send. MIC
-solves this problem by compressing the frame data by 1/2 before it is
-transferred through mipi dsi. The compressed frame data must be uncompressed in
-the panel PCB.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-mic".
-- reg: physical base address and length of the MIC registers set and system
-       register of mic.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
-- samsung,disp-syscon: the reference node for syscon for DISP block.
-- ports: contains a port which is connected to decon node and dsi node.
-	 address-cells and size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the
-	decon node or dsi node. The reg value must be 0 and 1 respectively.
-
-Example:
-SoC specific DT entry:
-mic: mic@13930000 {
-	compatible = "samsung,exynos5433-mic";
-	reg = <0x13930000 0x48>;
-	clocks = <&cmu_disp CLK_PCLK_MIC0>,
-	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
-	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
-	samsung,disp-syscon = <&syscon_disp>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mic_to_decon: endpoint {
-				remote-endpoint = <&decon_to_mic>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mic_to_dsi: endpoint {
-				remote-endpoint = <&dsi_to_mic>;
-			};
-		};
-	};
-};